From 63caa6875f5ebbea5e93844e9592050cb3af0b06 Mon Sep 17 00:00:00 2001 From: Tianling Shen Date: Thu, 10 Aug 2023 10:00:47 +0800 Subject: [PATCH] mediatek: add Imou LC-HX3001 support Signed-off-by: Tianling Shen (cherry picked from commit 9777c5e853b6ecb1677c0e138a8a39b07e3bd59a) --- .../uboot-envtools/files/mediatek_filogic | 3 + .../mediatek/dts/mt7981b-imou-lc-hx3001.dts | 242 ++++++++++++++++++ .../filogic/base-files/etc/board.d/01_leds | 5 + .../filogic/base-files/etc/board.d/02_network | 8 +- .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 6 + target/linux/mediatek/image/filogic.mk | 21 ++ 6 files changed, 284 insertions(+), 1 deletion(-) create mode 100644 target/linux/mediatek/dts/mt7981b-imou-lc-hx3001.dts diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 254883b757..fb40c9eeb3 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -40,6 +40,9 @@ bananapi,bpi-r3) glinet,gl-mt3000) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000" ;; +imou,lc-hx3001) + ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x80000" "1" + ;; livinet,zr-3020|\ livinet,zr-3020-ubootmod|\ qihoo,360t7-ubootmod) diff --git a/target/linux/mediatek/dts/mt7981b-imou-lc-hx3001.dts b/target/linux/mediatek/dts/mt7981b-imou-lc-hx3001.dts new file mode 100644 index 0000000000..cfc8b6b3fc --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-imou-lc-hx3001.dts @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2023 Tianling Shen + */ + +/dts-v1/; +#include +#include + +#include "mt7981.dtsi" + +/ { + model = "Imou LC-HX3001"; + compatible = "imou,lc-hx3001", "mediatek,mt7981"; + + aliases { + led-boot = &power_led; + led-failsafe = &power_led; + led-running = &power_led; + led-upgrade = &power_led; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0 0x40000000 0 0x10000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + + button-mesh { + label = "mesh"; + linux,code = ; + linux,input-type = ; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_led: led-0 { + label = "green:power"; + gpios = <&pio 4 GPIO_ACTIVE_LOW>; + }; + + led-1 { + label = "green:wlan"; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + + led-2 { + label = "red:wan"; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + led-3 { + label = "green:wan"; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-4 { + label = "green:lan"; + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + }; +}; + +&mdio_bus { + switch: switch@0 { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <52000000>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x00000 0x100000>; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + factory: partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7280000>; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <8>; + bias-pull-up = <103>; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <8>; + bias-pull-down = <103>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + + mediatek,mtd-eeprom = <&factory 0x0>; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index c7a1b3840d..633d10247f 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -9,6 +9,11 @@ case $board in cudy,wr3000-v1) ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" ;; +imou,lc-hx3001) + ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" "link" + ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link" + ucidef_set_led_netdev "wlan" "WLAN" "green:wlan" "phy1-ap0" "link" + ;; livinet,zr-3020|\ livinet,zr-3020-ubootmod) ucidef_set_led_netdev "internet" "INTERNET" "blue:internet" "wan" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index b2ab356a6f..099147066f 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -33,7 +33,8 @@ mediatek_setup_interfaces() glinet,gl-mt3000) ucidef_set_interfaces_lan_wan eth1 eth0 ;; - h3c,magic-nx30-pro) + h3c,magic-nx30-pro|\ + imou,lc-hx3001) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1 ;; mediatek,mt7986a-rfb) @@ -91,6 +92,11 @@ mediatek_setup_macs() lan_mac=$(macaddr_add "$wan_mac" 1) label_mac=$wan_mac ;; + imou,lc-hx3001) + lan_mac=$(mtd_get_mac_ascii u-boot-env mac) + [ -n "$lan_mac" ] || lan_mac=$(macaddr_add $(mtd_get_mac_binary Factory 0x4) -1) + wan_mac=$(macaddr_add $lan_mac 2) + ;; mercusys,mr90x-v1) label_mac=$(get_mac_binary "/tmp/tp_data/default-mac" 0) lan_mac=$label_mac diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 95195a00ee..5b3d2eda21 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -48,6 +48,12 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress ;; + imou,lc-hx3001) + addr=$(mtd_get_mac_ascii u-boot-env mac) + [ -n "$addr" ] || addr=$(macaddr_add $(mtd_get_mac_binary Factory 0x4) -1) + [ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress + ;; jcg,q30-ubootmod) [ "$PHYNBR" = "1" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 00b91af56b..e83a91a4a3 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -245,6 +245,27 @@ define Device/h3c_magic-nx30-pro endef TARGET_DEVICES += h3c_magic-nx30-pro +define Device/imou_lc-hx3001 + DEVICE_VENDOR := Imou + DEVICE_MODEL := LC-HX3001 + DEVICE_DTS := mt7981b-imou-lc-hx3001 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 113152k + KERNEL_IN_UBI := 1 + IMAGES += factory.bin + IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + KERNEL = kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb + KERNEL_INITRAMFS = kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd +endef +TARGET_DEVICES += imou_lc-hx3001 + define Device/jcg_q30-ubootmod DEVICE_VENDOR := JCG DEVICE_MODEL := Q30 (custom U-Boot layout)