sunxi: add support for FriendlyARM NanoPi R1S H5
(cherry picked from commit144c82515cand3adf449fa9) Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn>
This commit is contained in:
AmadeusGhost
@@ -256,6 +256,14 @@ define U-Boot/nanopi_neo2
|
||||
UENV:=a64
|
||||
endef
|
||||
|
||||
define U-Boot/nanopi_r1s_h5
|
||||
BUILD_SUBTARGET:=cortexa53
|
||||
NAME:=NanoPi R1S (H5)
|
||||
BUILD_DEVICES:=friendlyarm_nanopi-r1s-h5
|
||||
DEPENDS:=+PACKAGE_u-boot-nanopi_r1s_h5:arm-trusted-firmware-sunxi
|
||||
UENV:=a64
|
||||
endef
|
||||
|
||||
define U-Boot/pine64_plus
|
||||
BUILD_SUBTARGET:=cortexa53
|
||||
NAME:=Pine64 Plus A64
|
||||
@@ -332,6 +340,7 @@ UBOOT_TARGETS := \
|
||||
nanopi_neo_plus2 \
|
||||
nanopi_neo2 \
|
||||
nanopi_r1 \
|
||||
nanopi_r1s_h5 \
|
||||
orangepi_zero \
|
||||
orangepi_r1 \
|
||||
orangepi_one \
|
||||
|
||||
@@ -0,0 +1,233 @@
|
||||
--- a/arch/arm/dts/Makefile
|
||||
+++ b/arch/arm/dts/Makefile
|
||||
@@ -552,6 +552,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \
|
||||
sun50i-h5-libretech-all-h5-cc.dtb \
|
||||
sun50i-h5-nanopi-neo2.dtb \
|
||||
sun50i-h5-nanopi-neo-plus2.dtb \
|
||||
+ sun50i-h5-nanopi-r1s-h5.dtb \
|
||||
sun50i-h5-orangepi-zero-plus.dtb \
|
||||
sun50i-h5-orangepi-pc2.dtb \
|
||||
sun50i-h5-orangepi-prime.dtb \
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
|
||||
@@ -0,0 +1,204 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+/*
|
||||
+ * Copyright (C) 2021 AmadeusGhost <amadeus@jmu.edu.cn>
|
||||
+ *
|
||||
+ * Based on sun50i-h5-nanopi-neo2.dts, which is:
|
||||
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include "sun50i-h5.dtsi"
|
||||
+
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+
|
||||
+/ {
|
||||
+ model = "FriendlyARM NanoPi R1S H5";
|
||||
+ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &emac;
|
||||
+ i2c0 = &i2c0;
|
||||
+ serial0 = &uart0;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ sys {
|
||||
+ label = "nanopi:red:sys";
|
||||
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ wan {
|
||||
+ label = "nanopi:green:wan";
|
||||
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ lan {
|
||||
+ label = "nanopi:green:lan";
|
||||
+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ r-gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+
|
||||
+ reset {
|
||||
+ label = "reset";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ reg_gmac_3v3: gmac-3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "gmac-3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ startup-delay-us = <100000>;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ reg_vcc3v3: vcc3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ };
|
||||
+
|
||||
+ reg_usb0_vbus: usb0-vbus {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "usb0-vbus";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
+ vdd_cpux: gpio-regulator {
|
||||
+ compatible = "regulator-gpio";
|
||||
+ regulator-name = "vdd-cpux";
|
||||
+ regulator-type = "voltage";
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ regulator-min-microvolt = <1100000>;
|
||||
+ regulator-max-microvolt = <1300000>;
|
||||
+ regulator-ramp-delay = <50>; /* 4ms */
|
||||
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
|
||||
+ gpios-states = <0x1>;
|
||||
+ states = <1100000 0x0>, <1300000 0x1>;
|
||||
+ };
|
||||
+
|
||||
+ wifi_pwrseq: wifi_pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
|
||||
+ post-power-on-delay-ms = <200>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <&vdd_cpux>;
|
||||
+};
|
||||
+
|
||||
+&ehci0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&emac {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emac_rgmii_pins>;
|
||||
+ phy-supply = <®_gmac_3v3>;
|
||||
+ phy-handle = <&ext_rgmii_phy>;
|
||||
+ phy-mode = "rgmii";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&external_mdio {
|
||||
+ ext_rgmii_phy: ethernet-phy@7 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <7>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2c0 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ eeprom@51 {
|
||||
+ compatible = "microchip,24c02";
|
||||
+ reg = <0x51>;
|
||||
+ pagesize = <16>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mmc0 {
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ bus-width = <4>;
|
||||
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mmc1 {
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ vqmmc-supply = <®_vcc3v3>;
|
||||
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||
+ bus-width = <4>;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ rtl8189etv: sdio_wifi@1 {
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&ohci0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart0_pa_pins>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_otg {
|
||||
+ dr_mode = "peripheral";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbphy {
|
||||
+ /* USB Type-A port's VBUS is always on */
|
||||
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
|
||||
+ usb0_vbus-supply = <®_usb0_vbus>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
--- /dev/null
|
||||
+++ b/configs/nanopi_r1s_h5_defconfig
|
||||
@@ -0,0 +1,13 @@
|
||||
+CONFIG_ARM=y
|
||||
+CONFIG_ARCH_SUNXI=y
|
||||
+CONFIG_SPL=y
|
||||
+CONFIG_MACH_SUN50I_H5=y
|
||||
+CONFIG_DRAM_CLK=672
|
||||
+CONFIG_DRAM_ZQ=3881977
|
||||
+# CONFIG_DRAM_ODT_EN is not set
|
||||
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
|
||||
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
|
||||
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-r1s-h5"
|
||||
+CONFIG_SUN8I_EMAC=y
|
||||
+CONFIG_USB_EHCI_HCD=y
|
||||
@@ -8,7 +8,8 @@ boardname="${board##*,}"
|
||||
board_config_update
|
||||
|
||||
case $board in
|
||||
friendlyarm,nanopi-r1)
|
||||
friendlyarm,nanopi-r1|\
|
||||
friendlyarm,nanopi-r1s-h5)
|
||||
ucidef_set_led_netdev "wan" "WAN" "nanopi:green:wan" "eth0"
|
||||
ucidef_set_led_netdev "lan" "LAN" "nanopi:green:lan" "eth1"
|
||||
;;
|
||||
|
||||
@@ -4,28 +4,62 @@
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
sunxi_setup_interfaces()
|
||||
{
|
||||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
friendlyarm,nanopi-r1|\
|
||||
friendlyarm,nanopi-r1s-h5)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
;;
|
||||
lamobo,lamobo-r1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"4:lan:1" "0:lan:2" "1:lan:3" "2:lan:4" "3:wan" "8@eth0"
|
||||
;;
|
||||
olimex,a20-olinuxino-micro)
|
||||
ucidef_set_interface_lan "wlan0"
|
||||
;;
|
||||
xunlong,orangepi-r1)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
nanopi_generate_mac()
|
||||
{
|
||||
local sd_hash=$(sha256sum /sys/devices/platform/soc/1c0f000.mmc/mmc_host/mmc0/mmc0:*/cid)
|
||||
local mac_base=$(macaddr_canonicalize "$(echo "${sd_hash}" | dd bs=1 count=12 2>/dev/null)")
|
||||
echo "$(macaddr_unsetbit_mc "$(macaddr_setbit_la "${mac_base}")")"
|
||||
}
|
||||
|
||||
sunxi_setup_macs()
|
||||
{
|
||||
local board="$1"
|
||||
local lan_mac=""
|
||||
local wan_mac=""
|
||||
local label_mac=""
|
||||
|
||||
case "$board" in
|
||||
friendlyarm,nanopi-r1s-h5)
|
||||
lan_mac=$(nanopi_generate_mac)
|
||||
;;
|
||||
esac
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
|
||||
[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
|
||||
}
|
||||
|
||||
board_config_update
|
||||
|
||||
case $(board_name) in
|
||||
friendlyarm,nanopi-r1)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
;;
|
||||
lamobo,lamobo-r1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"4:lan:1" "0:lan:2" "1:lan:3" "2:lan:4" "3:wan" "8@eth0"
|
||||
;;
|
||||
olimex,a20-olinuxino-micro)
|
||||
ucidef_set_interface_lan "wlan0"
|
||||
;;
|
||||
xunlong,orangepi-r1)
|
||||
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
;;
|
||||
esac
|
||||
|
||||
board=$(board_name)
|
||||
sunxi_setup_interfaces $board
|
||||
sunxi_setup_macs $board
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
||||
@@ -38,6 +38,19 @@ define Device/friendlyarm_nanopi-neo2
|
||||
endef
|
||||
TARGET_DEVICES += friendlyarm_nanopi-neo2
|
||||
|
||||
define Device/friendlyarm_nanopi-r1s-h5
|
||||
DEVICE_VENDOR := FriendlyARM
|
||||
DEVICE_MODEL:=Nanopi R1S H5
|
||||
DEVICE_PACKAGES:= kmod-eeprom-at24 kmod-gpio-button-hotplug kmod-leds-gpio \
|
||||
kmod-rtl8189es kmod-usb2 kmod-usb-net-rtl8152 wpad-basic
|
||||
SUPPORTED_DEVICES:=nanopi-r1s-h5
|
||||
SUNXI_DTS_DIR := allwinner/
|
||||
SOC := sun50i-h5
|
||||
KERNEL_NAME := Image
|
||||
KERNEL := kernel-bin
|
||||
endef
|
||||
TARGET_DEVICES += friendlyarm_nanopi-r1s-h5
|
||||
|
||||
define Device/libretech_all-h3-cc-h5
|
||||
DEVICE_VENDOR := Libre Computer
|
||||
DEVICE_MODEL := ALL-H3-CC
|
||||
|
||||
@@ -0,0 +1,244 @@
|
||||
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
|
||||
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
|
||||
@@ -246,6 +246,11 @@ properties:
|
||||
- const: friendlyarm,nanopi-r1
|
||||
- const: allwinner,sun8i-h3
|
||||
|
||||
+ - description: FriendlyARM NanoPi R1S H5
|
||||
+ items:
|
||||
+ - const: friendlyarm,nanopi-r1s-h5
|
||||
+ - const: allwinner,sun50i-h5
|
||||
+
|
||||
- description: Gemei G9 Tablet
|
||||
items:
|
||||
- const: gemei,g9
|
||||
--- a/arch/arm64/boot/dts/allwinner/Makefile
|
||||
+++ b/arch/arm64/boot/dts/allwinner/Makefile
|
||||
@@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-or
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
|
||||
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
|
||||
@@ -0,0 +1,217 @@
|
||||
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+/*
|
||||
+ * Copyright (C) 2021 AmadeusGhost <amadeus@jmu.edu.cn>
|
||||
+ *
|
||||
+ * Based on sun50i-h5-nanopi-neo2.dts, which is:
|
||||
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include "sun50i-h5.dtsi"
|
||||
+#include "sun50i-h5-cpu-opp.dtsi"
|
||||
+
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+
|
||||
+/ {
|
||||
+ model = "FriendlyARM NanoPi R1S H5";
|
||||
+ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &emac;
|
||||
+ i2c0 = &i2c0;
|
||||
+ serial0 = &uart0;
|
||||
+
|
||||
+ led-boot = &led_sys;
|
||||
+ led-failsafe = &led_sys;
|
||||
+ led-running = &led_sys;
|
||||
+ led-upgrade = &led_sys;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ led_sys: sys {
|
||||
+ label = "nanopi:red:sys";
|
||||
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ wan {
|
||||
+ label = "nanopi:green:wan";
|
||||
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ lan {
|
||||
+ label = "nanopi:green:lan";
|
||||
+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ r-gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+
|
||||
+ reset {
|
||||
+ label = "reset";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ reg_gmac_3v3: gmac-3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "gmac-3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ startup-delay-us = <100000>;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ reg_vcc3v3: vcc3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ };
|
||||
+
|
||||
+ reg_usb0_vbus: usb0-vbus {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "usb0-vbus";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
+ vdd_cpux: gpio-regulator {
|
||||
+ compatible = "regulator-gpio";
|
||||
+ regulator-name = "vdd-cpux";
|
||||
+ regulator-type = "voltage";
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ regulator-min-microvolt = <1100000>;
|
||||
+ regulator-max-microvolt = <1300000>;
|
||||
+ regulator-ramp-delay = <50>; /* 4ms */
|
||||
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
|
||||
+ gpios-states = <0x1>;
|
||||
+ states = <1100000 0x0>, <1300000 0x1>;
|
||||
+ };
|
||||
+
|
||||
+ wifi_pwrseq: wifi_pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
|
||||
+ post-power-on-delay-ms = <200>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&cpu0 {
|
||||
+ cpu-supply = <&vdd_cpux>;
|
||||
+};
|
||||
+
|
||||
+&ehci0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci1 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ usb-eth@1 {
|
||||
+ compatible = "realtek,rtl8153";
|
||||
+ reg = <1>;
|
||||
+
|
||||
+ realtek,led-data = <0x87>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&ehci2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&emac {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emac_rgmii_pins>;
|
||||
+ phy-supply = <®_gmac_3v3>;
|
||||
+ phy-handle = <&ext_rgmii_phy>;
|
||||
+ phy-mode = "rgmii";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&external_mdio {
|
||||
+ ext_rgmii_phy: ethernet-phy@7 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
+ reg = <7>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2c0 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ eeprom@51 {
|
||||
+ compatible = "microchip,24c02";
|
||||
+ reg = <0x51>;
|
||||
+ pagesize = <16>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mmc0 {
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ bus-width = <4>;
|
||||
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mmc1 {
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ vqmmc-supply = <®_vcc3v3>;
|
||||
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||
+ bus-width = <4>;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ rtl8189etv: sdio_wifi@1 {
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&ohci0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart0_pa_pins>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_otg {
|
||||
+ dr_mode = "peripheral";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbphy {
|
||||
+ /* USB Type-A port's VBUS is always on */
|
||||
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
|
||||
+ usb0_vbus-supply = <®_usb0_vbus>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
Reference in New Issue
Block a user