This patch adds support for the VoCore VoCore2 and its complementary
"ultimate" dock.
Specifications:
- SoC: MediaTek MT7628AN (580MHz, ramips)
- RAM: 128MB DDR2 166MHz
- Storage: 16MB NOR SPI flash onboard + microSD slot on dock
- Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2
boards with onboard 1x chip antenna
- Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header
- Dock hardware:
- USB 2.0 socket
- MicroSD socket
- 100Mbps Ethernet x1
- 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S
DAC/ADC (support WIP)
- Micro USB for power and console (UART2)
Initial installation:
- VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on
SSID "VoCore2"
- Connect to VoCore2 by Ethernet or Wi-Fi
- `ssh root@192.168.1.1` (password is "vocore")
- scp/wget/etc. LEDE sysupgrade.bin to VoCore2
- `sysupgrade -n <your image>.bin` (don't keep old config, as the
original firmware uses Ralink SDK Wi-Fi drivers and not
mt76+mac80211)
- after sysupgrade completes, Wi-Fi will be disabled by default so use
Ethernet or the micro USB console to configure Wi-Fi again
Signed-off-by: Andrew Yong <me@ndoo.sg>
58 lines
1.4 KiB
Makefile
58 lines
1.4 KiB
Makefile
#
|
|
# MT7628 Profiles
|
|
#
|
|
|
|
define Device/mt7628
|
|
DTS := MT7628
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := $(ralink_default_fw_size_4M)
|
|
DEVICE_TITLE := MediaTek MT7628 EVB
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += mt7628
|
|
|
|
define Device/miwifi-nano
|
|
DTS := MIWIFI-NANO
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := Xiaomi MiWiFi Nano
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += miwifi-nano
|
|
|
|
define Device/vocore2
|
|
DTS := VOCORE2
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := VoCore VoCore2
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
|
|
kmod-sdhci kmod-sdhci-mt7620
|
|
endef
|
|
TARGET_DEVICES += vocore2
|
|
|
|
define Device/wl-wn575a3
|
|
DTS := WL-WN575A3
|
|
IMAGE_SIZE := $(ralink_default_fw_size_8M)
|
|
DEVICE_TITLE := Wavlink WL-WN575A3
|
|
endef
|
|
TARGET_DEVICES += wl-wn575a3
|
|
|
|
define Device/wrtnode2p
|
|
DTS := WRTNODE2P
|
|
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
|
DEVICE_TITLE := WRTnode 2P
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += wrtnode2p
|
|
|
|
define Device/duzun-dm06
|
|
DTS := DUZUN-DM06
|
|
DEVICE_TITLE := DuZun DM06
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += duzun-dm06
|
|
|
|
define Device/mac1200r-v2
|
|
DTS := MAC1200RV2
|
|
DEVICE_TITLE := Mercury MAC1200R v2.0
|
|
endef
|
|
TARGET_DEVICES += mac1200r-v2
|