INAGAKI Hiroshi
3a8d65010d
ramips: add support for ELECOM WRC-2533GST2
ELECOM WRC-2533GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based
on MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 256 MiB
- Flash : SPI-NOR 32 MiB
- WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615)
- Ethernet : 10/100/1000 Mbps x5
- Switch : MediaTek MT7530 (SoC)
- LED/keys : 4x/6x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J4: 3.3V, GND, TX, RX from ethernet port side
- 57600n8
- Power : 12VDC, 1.5A
Flash instruction using factory image:
1. Boot WRC-2533GST2 normally
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2020-06-21 20:56:42 +02:00
..
2020-06-16 14:26:33 +02:00
2020-06-21 20:56:42 +02:00
2020-05-19 19:03:07 +08:00
2020-06-21 20:56:42 +02:00
2020-06-16 14:26:33 +02:00
2020-06-16 14:26:33 +02:00
2020-06-16 14:26:33 +02:00
2020-06-03 16:49:28 +02:00
2020-06-16 23:36:26 +02:00
2020-05-19 19:03:02 +08:00
2020-06-16 14:26:33 +02:00
2020-06-16 14:26:33 +02:00
2020-04-12 22:27:18 +08:00
2020-04-05 18:16:17 +08:00