Nanako/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mediatek: add ABT ASR3000 support

Browse Source 
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(cherry picked from commit 02f7ea25d6)
This commit is contained in:
Tianling Shen
2023-10-19 15:14:45 +08:00
parent 8928d6297a
commit 115d7c0717
5 changed files with 302 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

262
target/linux/mediatek/dts/mt7981b-abt-asr3000-ubootmod.dts Normal file
View File

@@ -0,0 +1,262 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2023 Tianling Shen <cnsztl@immortalwrt.org>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "mt7981.dtsi"
/ {
model = "ABT ASR3000 (custom U-Boot layout)";
compatible = "abt,asr3000-ubootmod", "mediatek,mt7981";
aliases {
led-boot = &wps_led;
led-failsafe = &wps_led;
led-upgrade = &wps_led;
serial0 = &uart0;
label-mac-device = &gmac1;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0 0x40000000 0 0x10000000>;
};
gpio-keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
};
button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
};
};
gpio-leds {
compatible = "gpio-leds";
led-0 {
label = "red:wan";
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
};
led-1 {
label = "green:wan";
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
};
wps_led: led-2 {
label = "green:wps";
gpios = <&pio 15 GPIO_ACTIVE_LOW>;
};
led-3 {
label = "green:wlan2g";
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
};
led-4 {
label = "green:wlan5g";
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
};
};
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
nvmem-cells = <&macaddr_art_7c>;
nvmem-cell-names = "mac-address-ascii";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "gmii";
phy-handle = <&int_gbe_phy>;
nvmem-cells = <&macaddr_art_7c>;
nvmem-cell-names = "mac-address-ascii";
};
};
&mdio_bus {
switch: switch@0 {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
spi_nand: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
spi-cal-enable;
spi-cal-mode = "read-data";
spi-cal-datalen = <7>;
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
spi-cal-addrlen = <5>;
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "BL2";
reg = <0x00000 0x100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "art";
reg = <0x180000 0x100000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_7c: macaddr@7c {
reg = <0x7c 0x11>;
};
};
factory: partition@280000 {
label = "Factory";
reg = <0x280000 0x100000>;
};
partition@380000 {
label = "FIP";
reg = <0x380000 0x200000>;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0x6e80000>;
};
};
};
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
&pio {
spi0_flash_pins: spi0-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
status = "okay";
mediatek,mtd-eeprom = <&factory 0x0>;
};

5
target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
View File

@@ -6,6 +6,11 @@ board=$(board_name)
board_config_update
case $board in
abt,asr3000-ubootmod)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan2g" "phy0-ap0"
ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wlan5g" "phy1-ap0"
;;
cudy,wr3000-v1)
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
;;

17
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
View File

@@ -8,6 +8,15 @@ mediatek_setup_interfaces()
local board="$1"
case $board in
abt,asr3000-ubootmod|\
cmcc,rax3000m|\
cmcc,rax3000m-emmc-ubootmod|\
cmcc,rax3000m-nand-ubootmod|\
h3c,magic-nx30-pro|\
h3c,magic-nx30-pro-nmbm|\
imou,lc-hx3001-ubootmod)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
;;
acer,predator-w6)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1
;;
@@ -30,14 +39,6 @@ mediatek_setup_interfaces()
qihoo,360t7-ubootmod)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
;;
cmcc,rax3000m|\
cmcc,rax3000m-emmc-ubootmod|\
cmcc,rax3000m-nand-ubootmod|\
h3c,magic-nx30-pro|\
h3c,magic-nx30-pro-nmbm|\
imou,lc-hx3001-ubootmod)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
;;
glinet,gl-mt3000)
ucidef_set_interfaces_lan_wan eth1 eth0
;;

5
target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
View File

@@ -10,6 +10,11 @@ PHYNBR=${DEVPATH##*/phy}
board=$(board_name)
case "$board" in
abt,asr3000-ubootmod)
addr=$(get_mac_label)
[ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
;;
acer,predator-w6)
key_path="/var/qcidata/data"
[ "$PHYNBR" = "0" ] && cat $key_path/2gMAC > /sys${DEVPATH}/macaddress

21
target/linux/mediatek/image/filogic.mk
View File

@@ -90,6 +90,27 @@ define Build/zyxel-nwa-fit-filogic
@mv $@.new $@
endef
define Device/abt_asr3000-ubootmod
DEVICE_VENDOR := ABT
DEVICE_MODEL := ASR3000 (custom U-Boot layout)
DEVICE_DTS := mt7981b-abt-asr3000-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 113152k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += abt_asr3000-ubootmod
define Device/asus_tuf-ax4200
DEVICE_VENDOR := ASUS
DEVICE_MODEL := TUF-AX4200