Nanako/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge Official Source

Browse Source 
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
This commit is contained in:
Tianling Shen
2023-08-26 11:05:01 +08:00
parent 909f191fec e74a4b509f
commit 2a526eeefa
15 changed files with 637 additions and 261 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
package/boot/uboot-envtools/files/mediatek_filogic
View File

@@ -53,7 +53,7 @@ mercusys,mr90x-v1)
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
;;
netgear,wax220)
ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x20000" "0x20000"
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
;;
xiaomi,mi-router-wr30u-112m-nmbm|\
xiaomi,mi-router-wr30u-stock|\

32
target/linux/ath79/dts/qca9563_netgear_wndr.dtsi
View File

@@ -90,6 +90,22 @@
linux,default-trigger = "phy1tpt";
};
};
ubi-concat {
compatible = "mtd-concat";
devices = <&ubiconcat0 &ubiconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x0 0x0>;
};
};
};
};
&spi {
@@ -165,10 +181,20 @@
reg = <0x0 0x400000>;
};
partition@400000 {
label = "ubi";
reg = <0x400000 0x7c00000>;
ubiconcat0: partition@400000 {
label = "ubiconcat0";
reg = <0x400000 0x5c00000>;
};
ubiconcat1: partition@6020000 {
label = "ubiconcat1";
reg = <0x6020000 0x1f60000>;
};
/*
* U-boot always unconditionally marks block 768, 1020 - 1023 as
* bad blocks on each boot. To avoid conflicts with the nand
* driver, manually skip them.
*/
};
};
};

13
target/linux/ath79/image/nand.mk
View File

@@ -285,7 +285,7 @@ define Device/meraki_mr18
endef
TARGET_DEVICES += meraki_mr18
# fake rootfs is mandatory, pad-offset 64 equals (1 * uimage_header)
# fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + '\0')
define Device/netgear_ath79_nand
DEVICE_VENDOR := NETGEAR
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
@@ -293,8 +293,9 @@ define Device/netgear_ath79_nand
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 25600k
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | \
pad-offset $$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem $$(UIMAGE_MAGIC)
KERNEL := kernel-bin | append-dtb | lzma | \
pad-offset $$(BLOCKSIZE) 129 | uImage lzma | pad-extra 1 | \
append-uImage-fakehdr filesystem $$(UIMAGE_MAGIC)
IMAGES := sysupgrade.bin factory.img
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | netgear-dni
@@ -372,6 +373,9 @@ TARGET_DEVICES += netgear_wndr4300tn
define Device/netgear_wndr4300-v2
SOC := qca9563
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Partition table has been changed to fix the \
first reboot issue. Please reflash factory image with nmrp or tftp.
DEVICE_MODEL := WNDR4300
DEVICE_VARIANT := v2
UIMAGE_MAGIC := 0x27051956
@@ -383,6 +387,9 @@ TARGET_DEVICES += netgear_wndr4300-v2
define Device/netgear_wndr4500-v3
SOC := qca9563
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Partition table has been changed to fix the \
first reboot issue. Please reflash factory image with nmrp or tftp.
DEVICE_MODEL := WNDR4500
DEVICE_VARIANT := v3
UIMAGE_MAGIC := 0x27051956

15
target/linux/ath79/nand/base-files/etc/board.d/05_compat-version Normal file
View File

@@ -0,0 +1,15 @@
. /lib/functions.sh
. /lib/functions/uci-defaults.sh
board_config_update
case "$(board_name)" in
netgear,wndr4300-v2|\
netgear,wndr4500-v3)
ucidef_set_compat_version "1.1"
;;
esac
board_config_flush
exit 0

3
target/linux/ipq40xx/base-files/etc/board.d/02_network
View File

@@ -108,7 +108,8 @@ ipq40xx_setup_interfaces()
zte,mf286d)
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
;;
zte,mf287plus)
zte,mf287plus|\
zte,mf287pro)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
;;

1
target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
View File

@@ -36,6 +36,7 @@ wallys,dr40x9)
ucidef_add_gpio_switch "sim_card_select" "SIM card select" "423" "0"
;;
zte,mf286d|\
zte,mf287pro|\
zte,mf289f)
ucidef_add_gpio_switch "power_btn_block" "Power button blocker" "421" "0"
;;

2
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
View File

@@ -28,6 +28,7 @@ EOF
zte,mf18a |\
zte,mf286d |\
zte,mf287plus |\
zte,mf287pro |\
zte,mf289f)
CI_UBIPART="rootfs"
local mtdnum="$( find_mtd_index $CI_UBIPART )"
@@ -211,6 +212,7 @@ platform_do_upgrade() {
zte,mf18a |\
zte,mf286d |\
zte,mf287plus |\
zte,mf287pro |\
zte,mf289f)
CI_UBIPART="rootfs"
nand_do_upgrade "$1"

183
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287.dtsi Normal file
View File

@@ -0,0 +1,183 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/soc/qcom,tcsr.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
chosen {
/*
* bootargs forced by u-boot bootipq command:
* 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
*/
bootargs-append = " root=/dev/ubiblock0_1";
};
leds {
compatible = "gpio-leds";
led_status: led-0 {
label = "blue:power";
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_BLUE>;
};
};
keys {
compatible = "gpio-keys";
key_reset: key-reset {
label = "reset";
linux,code = <KEY_RESTART>;
};
key_wps: key-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
};
};
soc {
rng@22000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
};
};
&mdio {
status = "okay";
};
&watchdog {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&usb2 {
status = "okay";
};
&usb3 {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&crypto {
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac {
status = "okay";
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_mac_0>;
mac-address-increment = <2>;
};
&switch {
status = "okay";
};
&swport2 {
status = "okay";
label = "lan1";
};
&swport3 {
status = "okay";
label = "lan2";
};
&swport4 {
status = "okay";
label = "lan3";
};
&swport5 {
status = "okay";
label = "lan4";
};
&qpic_bam {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0>;
qcom,ath10k-calibration-variant = "zte,mf287plus";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0>;
mac-address-increment = <1>;
qcom,ath10k-calibration-variant = "zte,mf287plus";
};

180
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts
View File

@@ -3,31 +3,12 @@
// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/soc/qcom,tcsr.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "qcom-ipq4018-mf287.dtsi"
/ {
model = "ZTE MF287Plus";
compatible = "zte,mf287plus";
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
chosen {
/*
* bootargs forced by u-boot bootipq command:
* 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
*/
bootargs-append = " root=/dev/ubiblock0_1";
};
/*
* This node is used to restart modem module to avoid anomalous
* behaviours on initial communication.
@@ -36,85 +17,18 @@
compatible = "gpio-restart";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
leds {
compatible = "gpio-leds";
led_status: led-0 {
label = "blue:power";
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_BLUE>;
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
key-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
};
key-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
};
};
soc {
rng@22000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
};
};
&mdio {
status = "okay";
&key_reset {
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
};
&watchdog {
status = "okay";
&key_wps {
gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
};
&blsp_dma {
status = "okay";
};
&usb2 {
status = "okay";
};
&usb3 {
status = "okay";
&led_status {
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
};
&blsp1_spi1 {
@@ -276,59 +190,6 @@
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&crypto {
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac {
status = "okay";
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_mac_0>;
mac-address-increment = <2>;
};
&switch {
status = "okay";
};
&swport2 {
status = "okay";
label = "lan1";
};
&swport3 {
status = "okay";
label = "lan2";
};
&swport4 {
status = "okay";
label = "lan3";
};
&swport5 {
status = "okay";
label = "lan4";
};
&qpic_bam {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
@@ -355,30 +216,3 @@
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0>;
qcom,ath10k-calibration-variant = "zte,mf287plus";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0>;
mac-address-increment = <1>;
qcom,ath10k-calibration-variant = "zte,mf287plus";
};

265
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287pro.dts Normal file
View File

@@ -0,0 +1,265 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
#include "qcom-ipq4018-mf287.dtsi"
/ {
model = "ZTE MF287Pro";
compatible = "zte,mf287pro";
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
modem {
gpio-export,name = "modem-reset";
gpio-export,output = <0>;
gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
};
};
regulator-usb-vbus {
compatible = "regulator-fixed";
regulator-name = "USB_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
gpio = <&tlmm 25 GPIO_ACTIVE_LOW>;
};
};
&key_reset {
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
};
&key_wps {
gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
};
&led_status {
gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>,
<&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0xc0000>;
read-only;
};
partition@1b0000 {
label = "0:reserved1";
reg = <0x1b0000 0x50000>;
read-only;
};
};
};
spi-nand@1 { /* flash@1 ? */
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "fota-flag";
reg = <0x0 0xa0000>;
read-only;
};
partition@a0000 {
label = "ART";
reg = <0xa0000 0x80000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@120000 {
label = "mac";
reg = <0x120000 0x80000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_mac_0: macaddr@0 {
reg = <0x0 0x6>;
};
};
partition@1a0000 {
label = "reserved2";
reg = <0x1a0000 0xc0000>;
};
partition@260000 {
label = "cfg-param";
reg = <0x260000 0x400000>;
read-only;
};
partition@660000 {
label = "log";
reg = <0x660000 0x400000>;
};
partition@a60000 {
label = "oops";
reg = <0xa60000 0xa0000>;
};
partition@b00000 {
label = "reserved3";
reg = <0xb00000 0x500000>;
};
partition@1000000 {
label = "web";
reg = <0x1000000 0x800000>;
};
partition@1800000 {
label = "rootfs";
reg = <0x1800000 0x1d00000>;
};
partition@3500000 {
label = "data";
reg = <0x3500000 0x1900000>;
};
partition@4e00000 {
label = "fota";
reg = <0x4e00000 0x3200000>;
};
};
};
};
&tlmm {
i2c_0_pins: i2c_0_pinmux {
mux {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio12", "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12", "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};

21
target/linux/ipq40xx/image/generic.mk
View File

@@ -1162,12 +1162,8 @@ define Device/zte_mf286d
endef
TARGET_DEVICES += zte_mf286d
define Device/zte_mf287plus
define Device/zte_mf287_common
$(call Device/zte_mf28x_common)
DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
DEVICE_MODEL := MF287Plus
DEVICE_ALT0_VENDOR := ZTE
DEVICE_ALT0_MODEL := MF287
DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
SOC := qcom-ipq4018
# The recovery image is used to return back to stock (an initramfs-based image
@@ -1178,8 +1174,23 @@ define Device/zte_mf287plus
IMAGE/factory.bin := append-ubi
IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/openwrt-$$(BOARD)$$(if $$(SUBTARGET),-$$(SUBTARGET))-$$(DEVICE_NAME)-initramfs-zImage.itb rootfs=$$$$@ | append-metadata
endef
define Device/zte_mf287plus
$(call Device/zte_mf287_common)
DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
DEVICE_MODEL := MF287Plus
DEVICE_ALT0_VENDOR := ZTE
DEVICE_ALT0_MODEL := MF287
endef
TARGET_DEVICES += zte_mf287plus
define Device/zte_mf287pro
$(call Device/zte_mf287_common)
DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
DEVICE_MODEL := MF287Pro
endef
TARGET_DEVICES += zte_mf287pro
define Device/zte_mf289f
$(call Device/zte_mf28x_common)
DEVICE_MODEL := MF289F

7
target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts
View File

@@ -83,6 +83,9 @@
phy0: ethernet-phy@5 {
reg = <5>;
compatible = "ethernet-phy-ieee802.3-c45";
/* LED0: Amber ; LED1: nc ; LED2: nc ; LED3: Green */
mxl,led-config = <0x3b0 0x0 0x0 0x3c0>;
};
};
@@ -111,10 +114,6 @@
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
mediatek,bmt-remap-range =
<0x0 0x580000>,
<0xef00000 0xef80000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;

121
target/linux/mediatek/dts/mt7986b-netgear-wax220.dts
View File

@@ -8,10 +8,8 @@
#include "mt7986b.dtsi"
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
model = "Netgear WAX220";
compatible = "netgear,wax220", "mediatek,mt7986b-spim-snand-rfb";
compatible = "netgear,wax220", "mediatek,mt7986b";
aliases {
serial0 = &uart0;
@@ -106,8 +104,6 @@
};
&mdio {
#address-cells = <1>;
#size-cells = <0>;
phy6: ethernet-phy@6 {
reg = <6>;
reset-assert-us = <100000>;
@@ -120,7 +116,6 @@
};
};
&pio {
spi_flash_pins: spi-flash-pins-33-to-38 {
mux {
@@ -145,13 +140,13 @@
groups = "wf_2g", "wf_5g";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
@@ -163,9 +158,9 @@
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA";
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA";
drive-strength = <4>;
};
};
@@ -196,29 +191,10 @@
#size-cells = <0x1>;
compatible = "fixed-partitions";
partition@5fc0000 {
label = "Traffic";
reg = <0x5fc0000 0x200000>;
};
partition@63c0000 {
label = "NTGRcryptD";
reg = <0x63c0000 0x500000>;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0x5140000>;
};
factory: partition@180000 {
label = "Factory";
reg = <0x180000 0x200000>;
};
partition@69c0000 {
label = "User_data";
reg = <0x69c0000 0x640000>;
partition@0 {
label = "BL2";
read-only;
reg = <0x0 0x100000>;
};
partition@100000 {
@@ -226,30 +202,9 @@
reg = <0x100000 0x80000>;
};
partition@68c0000 {
label = "LOG";
reg = <0x68c0000 0x100000>;
};
partition@5ac0000 {
label = "POT";
reg = <0x5ac0000 0x100000>;
};
partition@0 {
label = "BL2";
read-only;
reg = <0x0 0x100000>;
};
partition@5bc0000 {
label = "Language";
reg = <0x5bc0000 0x400000>;
};
partition@61c0000 {
label = "Cert";
reg = <0x61c0000 0x100000>;
factory: partition@180000 {
label = "Factory";
reg = <0x180000 0x200000>;
};
partition@380000 {
@@ -257,15 +212,55 @@
reg = <0x380000 0x200000>;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0x5140000>;
};
partition@56c0000 {
label = "RAE";
reg = <0x56c0000 0x400000>;
};
partition@5ac0000 {
label = "POT";
reg = <0x5ac0000 0x100000>;
};
partition@5bc0000 {
label = "Language";
reg = <0x5bc0000 0x400000>;
};
partition@5fc0000 {
label = "Traffic";
reg = <0x5fc0000 0x200000>;
};
partition@61c0000 {
label = "Cert";
reg = <0x61c0000 0x100000>;
};
partition@62c0000 {
label = "NTGRcryptK";
reg = <0x62c0000 0x100000>;
};
partition@63c0000 {
label = "NTGRcryptD";
reg = <0x63c0000 0x500000>;
};
partition@68c0000 {
label = "LOG";
reg = <0x68c0000 0x100000>;
};
partition@69c0000 {
label = "User_data";
reg = <0x69c0000 0x640000>;
};
};
};

35
target/linux/mediatek/filogic/base-files/lib/preinit/75_rootfs_prepare Normal file
View File

@@ -0,0 +1,35 @@
# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
rootfs_create() {
local blocks
blocks=$(cat /sys/class/ubi/ubi0/avail_eraseblocks)
[ -z "$blocks" ] && {
echo "Failed to read amount of available erase blocks" >&2
return
}
# Delete after getting available blocks: Make sure enough space is
# left to recreate these volumes.
ubirmvol /dev/ubi0 -N kernel_backup
ubirmvol /dev/ubi0 -N rootfs_backup
# Use 90% of remaining flash size for "rootfs_data"
ubimkvol /dev/ubi0 -n 20 -N rootfs_data --lebs $((blocks / 100 * 90))
mknod -m 0600 /dev/ubi0_20 c 250 21
}
rootfs_prepare() {
case $(board_name) in
netgear,wax220)
if ! ubinfo /dev/ubi0 -N rootfs_data &>/dev/null; then
echo "Creating \"rootfs_data\" UBI volume"
rootfs_create
fi
;;
*)
;;
esac
}
boot_hook_add preinit_main rootfs_prepare

18
target/linux/mediatek/image/filogic.mk
View File

@@ -104,7 +104,7 @@ define Device/acer_predator-w6
DEVICE_DTS := mt7986a-acer-predator-w6
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
@@ -322,18 +322,20 @@ endef
TARGET_DEVICES += livinet_zr-3020-ubootmod
define Device/netgear_wax220
DEVICE_VENDOR := Netgear
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := WAX220
DEVICE_DTS := mt7986b-netgear-wax220
DEVICE_DTS_DIR := ../dts
NETGEAR_ENC_MODEL := WAX220
NETGEAR_ENC_REGION := US
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
IMAGES := sysupgrade.bin
KERNEL_IN_UBI := 1
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGE_SIZE := 32768k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGES += factory.img
# Padding to 10M seems to be required by OEM web interface
IMAGE/factory.img := sysupgrade-tar | \
pad-to 10M | check-size | netgear-encrypted-factory
endef
TARGET_DEVICES += netgear_wax220