|
|
|
|
@@ -0,0 +1,809 @@
|
|
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
|
/*
|
|
|
|
|
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
|
|
|
|
* Copyright (c) 2024 Tianling Shen <cnsztl@gmail.com>
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
|
|
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
|
|
|
|
#include "rk3568.dtsi"
|
|
|
|
|
|
|
|
|
|
/ {
|
|
|
|
|
model = "ArmSom Sige3";
|
|
|
|
|
compatible = "armsom,sige3", "rockchip,rk3568";
|
|
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
|
ethernet0 = &gmac1;
|
|
|
|
|
mmc0 = &sdhci;
|
|
|
|
|
mmc1 = &sdmmc0;
|
|
|
|
|
mmc2 = &sdmmc1;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
chosen: chosen {
|
|
|
|
|
stdout-path = "serial2:1500000n8";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio-leds {
|
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&led_green_pin>, <&led_red_pin>;
|
|
|
|
|
|
|
|
|
|
led_status_green: led-0 {
|
|
|
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
|
|
|
function = LED_FUNCTION_STATUS;
|
|
|
|
|
gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
linux,default-trigger = "heartbeat";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
led_status_red: led-1 {
|
|
|
|
|
color = <LED_COLOR_ID_RED>;
|
|
|
|
|
function = LED_FUNCTION_STATUS;
|
|
|
|
|
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
hdmi-con {
|
|
|
|
|
compatible = "hdmi-connector";
|
|
|
|
|
type = "a";
|
|
|
|
|
|
|
|
|
|
port {
|
|
|
|
|
hdmi_con_in: endpoint {
|
|
|
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
fan: pwm-fan {
|
|
|
|
|
compatible = "pwm-fan";
|
|
|
|
|
cooling-levels = <0 50 100 150 200 255>;
|
|
|
|
|
fan-supply = <&vcc5v0_sys>;
|
|
|
|
|
pwms = <&pwm3 0 50000 0>;
|
|
|
|
|
#cooling-cells = <2>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
rk809-sound {
|
|
|
|
|
compatible = "simple-audio-card";
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&hp_det_pin>;
|
|
|
|
|
simple-audio-card,name = "Analog RK817";
|
|
|
|
|
simple-audio-card,format = "i2s";
|
|
|
|
|
simple-audio-card,hp-det-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
simple-audio-card,mclk-fs = <256>;
|
|
|
|
|
simple-audio-card,widgets =
|
|
|
|
|
"Headphone", "Headphones",
|
|
|
|
|
"Speaker", "Speaker";
|
|
|
|
|
simple-audio-card,routing =
|
|
|
|
|
"Headphones", "HPOL",
|
|
|
|
|
"Headphones", "HPOR",
|
|
|
|
|
"Speaker", "SPKO";
|
|
|
|
|
|
|
|
|
|
simple-audio-card,cpu {
|
|
|
|
|
sound-dai = <&i2s1_8ch>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
simple-audio-card,codec {
|
|
|
|
|
sound-dai = <&rk809>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
|
|
|
compatible = "mmc-pwrseq-simple";
|
|
|
|
|
clocks = <&pmucru CLK_RTC_32K>;
|
|
|
|
|
clock-names = "ext_clock";
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&wifi_enable_h &clk32k_out1>;
|
|
|
|
|
post-power-on-delay-ms = <100>;
|
|
|
|
|
power-off-delay-us = <5000000>;
|
|
|
|
|
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc12v_dcin: vcc12v-dcin-regulator {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
regulator-name = "vcc12v_dcin";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <12000000>;
|
|
|
|
|
regulator-max-microvolt = <12000000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc5v0_sys: vcc5v0-sys-regulator {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
regulator-name = "vcc5v0_sys";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
vin-supply = <&vcc12v_dcin>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc3v3_sys: vcc3v3-sys-regulator {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
regulator-name = "vcc3v3_sys";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
vin-supply = <&vcc12v_dcin>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
enable-active-high;
|
|
|
|
|
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pcie30_pwren_h>;
|
|
|
|
|
regulator-name = "vcc3v3_pcie30";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
startup-delay-us = <5000>;
|
|
|
|
|
vin-supply = <&vcc3v3_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc5v0_usb: vcc5v0-usb-regulator {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
regulator-name = "vcc5v0_usb";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc5v0_usb_host: vcc5v0-usb-host-regulator {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
enable-active-high;
|
|
|
|
|
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&vcc5v0_usb_host_en>;
|
|
|
|
|
regulator-name = "vcc5v0_usb_host";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
vin-supply = <&vcc5v0_usb>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc5v0_usb_host2: vcc5v0-usb-host2-regulator {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
enable-active-high;
|
|
|
|
|
gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&vcc5v0_usb_host2_en>;
|
|
|
|
|
regulator-name = "vcc5v0_usb_host2";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
vin-supply = <&vcc5v0_usb>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
enable-active-high;
|
|
|
|
|
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
|
|
|
|
regulator-name = "vcc5v0_usb_otg";
|
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
|
vin-supply = <&vcc5v0_usb>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&combphy0 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&combphy1 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&combphy2 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&cpu0 {
|
|
|
|
|
cpu-supply = <&vdd_cpu>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&cpu1 {
|
|
|
|
|
cpu-supply = <&vdd_cpu>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&cpu2 {
|
|
|
|
|
cpu-supply = <&vdd_cpu>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&cpu3 {
|
|
|
|
|
cpu-supply = <&vdd_cpu>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&gpu {
|
|
|
|
|
mali-supply = <&vdd_gpu>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&gmac1 {
|
|
|
|
|
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
|
|
|
|
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
|
|
|
|
assigned-clock-rates = <0>, <125000000>;
|
|
|
|
|
clock_in_out = "output";
|
|
|
|
|
phy-mode = "rgmii";
|
|
|
|
|
phy-handle = <&rgmii_phy1>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&gmac1m1_miim
|
|
|
|
|
&gmac1m1_tx_bus2
|
|
|
|
|
&gmac1m1_rx_bus2
|
|
|
|
|
&gmac1m1_rgmii_clk
|
|
|
|
|
&gmac1m1_rgmii_bus>;
|
|
|
|
|
snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
|
|
|
snps,reset-active-low;
|
|
|
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
|
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
|
|
|
tx_delay = <0x48>;
|
|
|
|
|
rx_delay = <0x2a>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&hdmi {
|
|
|
|
|
avdd-0v9-supply = <&vdda0v9_image>;
|
|
|
|
|
avdd-1v8-supply = <&vcca1v8_image>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&hdmi_in {
|
|
|
|
|
hdmi_in_vp0: endpoint {
|
|
|
|
|
remote-endpoint = <&vp0_out_hdmi>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&hdmi_out {
|
|
|
|
|
hdmi_out_con: endpoint {
|
|
|
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&hdmi_sound {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&i2c0 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
rk809: pmic@20 {
|
|
|
|
|
compatible = "rockchip,rk809";
|
|
|
|
|
reg = <0x20>;
|
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
|
|
|
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
|
#clock-cells = <1>;
|
|
|
|
|
clock-names = "mclk";
|
|
|
|
|
clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
|
|
|
|
system-power-controller;
|
|
|
|
|
#sound-dai-cells = <0>;
|
|
|
|
|
vcc1-supply = <&vcc3v3_sys>;
|
|
|
|
|
vcc2-supply = <&vcc3v3_sys>;
|
|
|
|
|
vcc3-supply = <&vcc3v3_sys>;
|
|
|
|
|
vcc4-supply = <&vcc3v3_sys>;
|
|
|
|
|
vcc5-supply = <&vcc3v3_sys>;
|
|
|
|
|
vcc6-supply = <&vcc3v3_sys>;
|
|
|
|
|
vcc7-supply = <&vcc3v3_sys>;
|
|
|
|
|
vcc8-supply = <&vcc3v3_sys>;
|
|
|
|
|
vcc9-supply = <&vcc3v3_sys>;
|
|
|
|
|
wakeup-source;
|
|
|
|
|
|
|
|
|
|
codec {
|
|
|
|
|
rockchip,mic-in-differential;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
|
vdd_logic: DCDC_REG1 {
|
|
|
|
|
regulator-name = "vdd_logic";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-initial-mode = <0x2>;
|
|
|
|
|
regulator-min-microvolt = <500000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
|
|
|
regulator-name = "vdd_gpu";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-initial-mode = <0x2>;
|
|
|
|
|
regulator-min-microvolt = <500000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
|
|
|
regulator-name = "vcc_ddr";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-initial-mode = <0x2>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_npu: DCDC_REG4 {
|
|
|
|
|
regulator-name = "vdd_npu";
|
|
|
|
|
regulator-initial-mode = <0x2>;
|
|
|
|
|
regulator-min-microvolt = <500000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc_1v8: DCDC_REG5 {
|
|
|
|
|
regulator-name = "vcc_1v8";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdda0v9_image: LDO_REG1 {
|
|
|
|
|
regulator-name = "vdda0v9_image";
|
|
|
|
|
regulator-min-microvolt = <950000>;
|
|
|
|
|
regulator-max-microvolt = <950000>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdda_0v9: LDO_REG2 {
|
|
|
|
|
regulator-name = "vdda_0v9";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <900000>;
|
|
|
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdda0v9_pmu: LDO_REG3 {
|
|
|
|
|
regulator-name = "vdda0v9_pmu";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <900000>;
|
|
|
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
|
regulator-suspend-microvolt = <900000>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vccio_acodec: LDO_REG4 {
|
|
|
|
|
regulator-name = "vccio_acodec";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vccio_sd: LDO_REG5 {
|
|
|
|
|
regulator-name = "vccio_sd";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc3v3_pmu: LDO_REG6 {
|
|
|
|
|
regulator-name = "vcc3v3_pmu";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
|
regulator-suspend-microvolt = <3300000>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcca_1v8: LDO_REG7 {
|
|
|
|
|
regulator-name = "vcca_1v8";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcca1v8_pmu: LDO_REG8 {
|
|
|
|
|
regulator-name = "vcca1v8_pmu";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
|
regulator-suspend-microvolt = <1800000>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcca1v8_image: LDO_REG9 {
|
|
|
|
|
regulator-name = "vcca1v8_image";
|
|
|
|
|
regulator-min-microvolt = <950000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
regulator-suspend-microvolt = <950000>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc_3v3: SWITCH_REG1 {
|
|
|
|
|
regulator-name = "vcc_3v3";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc3v3_sd: SWITCH_REG2 {
|
|
|
|
|
regulator-name = "vcc3v3_sd";
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usbc1: usb-typec@22 {
|
|
|
|
|
compatible = "fcs,fusb302";
|
|
|
|
|
reg = <0x22>;
|
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
|
|
|
interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&usbc1_int>;
|
|
|
|
|
vbus-supply = <&vcc3v3_sys>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_cpu: regulator@40 {
|
|
|
|
|
compatible = "rockchip,rk8600";
|
|
|
|
|
reg = <0x40>;
|
|
|
|
|
fcs,suspend-voltage-selector = <1>;
|
|
|
|
|
regulator-name = "vdd_cpu";
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-min-microvolt = <712500>;
|
|
|
|
|
regulator-max-microvolt = <1390000>;
|
|
|
|
|
regulator-ramp-delay = <2300>;
|
|
|
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
|
|
|
|
|
|
regulator-state-mem {
|
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
hym8563: hym8563@51 {
|
|
|
|
|
compatible = "haoyu,hym8563";
|
|
|
|
|
reg = <0x51>;
|
|
|
|
|
#clock-cells = <0>;
|
|
|
|
|
clock-frequency = <32768>;
|
|
|
|
|
clock-output-names = "hym8563";
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&hym8563_int>;
|
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
|
|
|
interrupts = <RK_PC0 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
|
wakeup-source;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&i2s0_8ch {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&i2s1_8ch {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&i2s1m0_sclktx
|
|
|
|
|
&i2s1m0_lrcktx
|
|
|
|
|
&i2s1m0_sdi0
|
|
|
|
|
&i2s1m0_sdo0>;
|
|
|
|
|
rockchip,trcm-sync-tx-only;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&mdio1 {
|
|
|
|
|
rgmii_phy1: ethernet-phy@0 {
|
|
|
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
|
|
|
reg = <0>;
|
|
|
|
|
pinctrl-0 = <ð_phy_reset_pin>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&pcie2x1 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&pcie30phy {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&pcie3x2 {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&pcie30_reset_pin>;
|
|
|
|
|
reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&pinctrl {
|
|
|
|
|
bt {
|
|
|
|
|
bt_reg_on_h: bt-reg-on-h {
|
|
|
|
|
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
bt_host_wake_h: bt-host-wake-h {
|
|
|
|
|
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
bt_wake_h: bt-wake-h {
|
|
|
|
|
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gmac1 {
|
|
|
|
|
eth_phy_reset_pin: eth-phy-reset-pin {
|
|
|
|
|
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
gpio-leds {
|
|
|
|
|
led_green_pin: led-green-pin {
|
|
|
|
|
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
led_red_pin: led-red-pin {
|
|
|
|
|
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
headphone {
|
|
|
|
|
hp_det_pin: hp-det-pin {
|
|
|
|
|
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
hym8563 {
|
|
|
|
|
hym8563_int: hym8563-int {
|
|
|
|
|
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pcie30 {
|
|
|
|
|
pcie30_pwren_h: pcie30-pwren-h {
|
|
|
|
|
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pcie30_reset_pin: pcie30-reset-pin {
|
|
|
|
|
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pmic {
|
|
|
|
|
pmic_int: pmic-int {
|
|
|
|
|
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sdio-pwrseq {
|
|
|
|
|
wifi_enable_h: wifi-enable-h {
|
|
|
|
|
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb {
|
|
|
|
|
vcc5v0_usb_host_en: vcc5v0-usb-host-en {
|
|
|
|
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc5v0_usb_host2_en: vcc5v0-usb-host2-en {
|
|
|
|
|
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
|
|
|
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usbc1_int: usbc1-int {
|
|
|
|
|
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&pmu_io_domains {
|
|
|
|
|
pmuio1-supply = <&vcc3v3_pmu>;
|
|
|
|
|
pmuio2-supply = <&vcc3v3_pmu>;
|
|
|
|
|
vccio1-supply = <&vccio_acodec>;
|
|
|
|
|
vccio2-supply = <&vcc_1v8>;
|
|
|
|
|
vccio3-supply = <&vccio_sd>;
|
|
|
|
|
vccio4-supply = <&vcc_1v8>;
|
|
|
|
|
vccio5-supply = <&vcc_3v3>;
|
|
|
|
|
vccio6-supply = <&vcc_1v8>;
|
|
|
|
|
vccio7-supply = <&vcc_3v3>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&pwm3 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&saradc {
|
|
|
|
|
vref-supply = <&vcca_1v8>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&sdhci {
|
|
|
|
|
bus-width = <8>;
|
|
|
|
|
max-frequency = <200000000>;
|
|
|
|
|
non-removable;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&sdmmc0 {
|
|
|
|
|
bus-width = <4>;
|
|
|
|
|
cap-mmc-highspeed;
|
|
|
|
|
cap-sd-highspeed;
|
|
|
|
|
disable-wp;
|
|
|
|
|
max-frequency = <150000000>;
|
|
|
|
|
no-sdio;
|
|
|
|
|
no-mmc;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
|
|
|
vmmc-supply = <&vcc3v3_sd>;
|
|
|
|
|
vqmmc-supply = <&vccio_sd>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&sdmmc1 {
|
|
|
|
|
bus-width = <4>;
|
|
|
|
|
cap-sd-highspeed;
|
|
|
|
|
cap-sdio-irq;
|
|
|
|
|
disable-wp;
|
|
|
|
|
keep-power-in-suspend;
|
|
|
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
|
|
|
non-removable;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
|
|
|
|
sd-uhs-sdr104;
|
|
|
|
|
vmmc-supply = <&vcc_3v3>;
|
|
|
|
|
vqmmc-supply = <&vcc_1v8>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&tsadc {
|
|
|
|
|
rockchip,hw-tshut-mode = <1>;
|
|
|
|
|
rockchip,hw-tshut-polarity = <0>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&uart1 {
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
|
|
|
|
|
uart-has-rtscts;
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
bluetooth {
|
|
|
|
|
compatible = "brcm,bcm43438-bt";
|
|
|
|
|
clocks = <&pmucru CLK_RTC_32K>;
|
|
|
|
|
clock-names = "lpo";
|
|
|
|
|
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&bt_host_wake_h &bt_wake_h &bt_reg_on_h>;
|
|
|
|
|
vbat-supply = <&vcc_3v3>;
|
|
|
|
|
vddio-supply = <&vcc_1v8>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&uart2 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb_host0_ehci {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb_host0_ohci {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb_host0_xhci {
|
|
|
|
|
dr_mode = "host";
|
|
|
|
|
extcon = <&usb2phy0>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb_host1_xhci {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb2phy0 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb2phy0_host {
|
|
|
|
|
phy-supply = <&vcc5v0_usb_host>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb2phy0_otg {
|
|
|
|
|
phy-supply = <&vcc5v0_usb_otg>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb2phy1 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb2phy1_host {
|
|
|
|
|
phy-supply = <&vcc5v0_usb_host2>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb2phy1_otg {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&vop {
|
|
|
|
|
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
|
|
|
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&vop_mmu {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&vp0 {
|
|
|
|
|
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
|
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
|
|
|
remote-endpoint = <&hdmi_in_vp0>;
|
|
|
|
|
};
|
|
|
|
|
};
|