Nanako/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mac80211: mt7601u: allow AP mode

Browse Source 
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
This commit is contained in:
Tianling Shen
2023-08-11 17:29:57 +08:00
parent 772e135630
commit d493b10e69
5 changed files with 44 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
package/kernel/mac80211/patches/ath10k/983-ath10k-allow-vht-on-2g.patch
View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4718,6 +4718,7 @@ static void ath10k_mac_setup_ht_vht_cap(
@@ -5034,6 +5034,7 @@ static void ath10k_mac_setup_ht_vht_cap(
if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
band = &ar->mac.sbands[NL80211_BAND_2GHZ];
band->ht_cap = ht_cap;

2
package/kernel/mac80211/patches/ath10k/988-ath10k-always-use-mac80211-loss-detection.patch
View File

@@ -18,7 +18,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -10080,7 +10080,6 @@ int ath10k_mac_register(struct ath10k *a
@@ -10081,7 +10081,6 @@ int ath10k_mac_register(struct ath10k *a
ieee80211_hw_set(ar->hw, CHANCTX_STA_CSA);
ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);

8
package/kernel/mac80211/patches/ath11k/983-ath11k-Enable-VHT-for-2G.patch
View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2594,9 +2594,9 @@
@@ -2776,9 +2776,9 @@ static void ath11k_peer_assoc_h_phymode(
} else if (sta->deflink.vht_cap.vht_supported &&
!ath11k_peer_assoc_h_vht_masked(vht_mcs_mask)) {
if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_40)
@@ -12,7 +12,7 @@
} else if (sta->deflink.ht_cap.ht_supported &&
!ath11k_peer_assoc_h_ht_masked(ht_mcs_mask)) {
if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_40)
@@ -5183,6 +5183,9 @@
@@ -5616,6 +5616,9 @@ static void ath11k_mac_setup_ht_vht_cap(
*ht_cap_info = ht_cap;
band->ht_cap = ath11k_create_ht_cap(ar, ht_cap,
rate_cap_rx_chainmask);
@@ -24,7 +24,7 @@
if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP &&
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -346,6 +346,8 @@ ath11k_pull_mac_phy_cap_svc_ready_ext(st
@@ -406,6 +406,8 @@ ath11k_pull_mac_phy_cap_svc_ready_ext(st
* handled.
*/
if (mac_phy_caps->supported_bands & WMI_HOST_WLAN_2G_CAP) {
@@ -32,4 +32,4 @@
+ pdev_cap->vht_mcs = mac_phy_caps->vht_supp_mcs_2g;
pdev_cap->tx_chain_mask = mac_phy_caps->tx_chain_mask_2g;
pdev_cap->rx_chain_mask = mac_phy_caps->rx_chain_mask_2g;
} else if (mac_phy_caps->supported_bands & WMI_HOST_WLAN_5G_CAP) {
}

36
package/kernel/mac80211/patches/mt7601u/100-w1fi-mt7601u-Add-AP-mode-support.patch Normal file
View File

@@ -0,0 +1,36 @@
From: Chukun Pan <amadeus@jmu.edu.cn>
To: Jakub Kicinski <kubakici@wp.pl>
Cc: Kalle Valo <kvalo@kernel.org>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Lintel Huang <lintel.huang@gmail.com>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, Chukun Pan <amadeus@jmu.edu.cn>
Subject: [PATCH] wifi: mt7601u: Add AP mode support
Date: Tue, 26 Jul 2022 00:16:03 +0800 [thread overview]
Message-ID: <20220725161603.15201-1-amadeus@jmu.edu.cn> (raw)
Add AP mode support to mt7601u chipset.
Simply tested it with firmware version
201302052146 and it seems working fine.
Run-tested-by: Lintel Huang <lintel.huang@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
drivers/net/wireless/mediatek/mt7601u/init.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/mediatek/mt7601u/init.c
+++ b/drivers/net/wireless/mediatek/mt7601u/init.c
@@ -609,7 +609,8 @@ int mt7601u_register_device(struct mt760
SET_IEEE80211_PERM_ADDR(hw, dev->macaddr);
wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR;
- wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP);
wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);

4
package/kernel/mac80211/patches/subsys/600-mac80211-allow-vht-on-2g.patch
View File

@@ -12,7 +12,7 @@
have_80mhz = true;
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1906,7 +1906,8 @@ static int ieee80211_build_preq_ies_band
@@ -1955,7 +1955,8 @@ static int ieee80211_build_preq_ies_band
/* Check if any channel in this sband supports at least 80 MHz */
for (i = 0; i < sband->n_channels; i++) {
if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
@@ -24,7 +24,7 @@
have_80mhz = true;
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -5068,7 +5068,8 @@ static int ieee80211_prep_channel(struct
@@ -4744,7 +4744,8 @@ static int ieee80211_prep_channel(struct
have_80mhz = false;
for (i = 0; i < sband->n_channels; i++) {
if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |