OpenWrt v23.05.0-rc2: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

.github/labeler.yml

@@ -5,8 +5,8 @@
   - "target/linux/apm821xx/**"
 "target/archs38":
   - "target/linux/archs38/**"
-"target/armvirt":
-  - "target/linux/armvirt/**"
+"target/armsr":
+  - "target/linux/armsr/**"
 "target/at91":
   - "target/linux/at91/**"
   - "package/boot/at91bootstrap/**"
@@ -94,6 +94,10 @@
   - "target/linux/rockchip/**"
   - "package/boot/arm-trusted-firmware-rockchip/**"
   - "package/boot/uboot-rockchip/**"
+"target/sifiveu":
+  - "target/linux/sifiveu/**"
+  - "package/boot/uboot-sifiveu/**"
+  - "package/boot/opensbi/**"
 "target/sunxi":
   - "target/linux/sunxi/**"
   - "package/boot/arm-trusted-firmware-sunxi/**"

.github/workflows/build.yml

@@ -8,6 +8,9 @@ on:
       target:
         required: true
         type: string
+      subtarget:
+        required: true
+        type: string
       testing:
         type: boolean
       build_toolchain:
@@ -50,7 +53,7 @@ permissions:
 
 jobs:
   setup_build:
-    name: Setup build ${{ inputs.target }}
+    name: Setup build ${{ inputs.target }}/${{ inputs.subtarget }}
     runs-on: ubuntu-latest
     outputs:
       owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
@@ -109,7 +112,7 @@ jobs:
           echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
 
   build:
-    name: Build ${{ inputs.target }}
+    name: Build ${{ inputs.target }}/${{ inputs.subtarget }}
     needs: setup_build
     runs-on: ubuntu-latest
 
@@ -153,35 +156,6 @@ jobs:
           repository: openwrt/telephony
           path: openwrt/feeds/telephony
 
-      - name: Fix permission
-        run: |
-          chown -R buildbot:buildbot openwrt
-
-      - name: Initialization environment
-        run: |
-          TARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 1)
-          SUBTARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 2)
-          echo "TARGET=$TARGET" >> "$GITHUB_ENV"
-          echo "SUBTARGET=$SUBTARGET" >> "$GITHUB_ENV"
-
-      - name: Prepare prebuilt tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          mkdir -p staging_dir build_dir
-          ln -s /prebuilt_tools/staging_dir/host staging_dir/host
-          ln -s /prebuilt_tools/build_dir/host build_dir/host
-
-          ./scripts/ext-tools.sh --refresh
-
-      - name: Update & Install feeds
-        if: inputs.include_feeds == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          ./scripts/feeds update -a
-          ./scripts/feeds install -a
-
       - name: Parse toolchain file
         if: inputs.build_toolchain == false
         id: parse-toolchain
@@ -213,7 +187,7 @@ jobs:
             fi
           fi
 
-          SUMS_FILE="https://downloads.cdn.openwrt.org/$TOOLCHAIN_PATH/targets/${{ env.TARGET }}/${{ env.SUBTARGET }}/sha256sums"
+          SUMS_FILE="https://downloads.cdn.openwrt.org/$TOOLCHAIN_PATH/targets/${{ inputs.target }}/${{ inputs.subtarget }}/sha256sums"
           if curl $SUMS_FILE | grep -q ".*openwrt-toolchain.*tar.xz"; then
             TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-toolchain.*tar.xz")"
             TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-toolchain.*\).tar.xz/\1/p')
@@ -231,20 +205,42 @@ jobs:
           echo "TOOLCHAIN_FILE=$TOOLCHAIN_FILE" >> "$GITHUB_ENV"
           echo "TOOLCHAIN_PATH=$TOOLCHAIN_PATH" >> "$GITHUB_ENV"
 
+      - name: Fix permission
+        run: |
+          chown -R buildbot:buildbot openwrt
+
+      - name: Prepare prebuilt tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          mkdir -p staging_dir build_dir
+          ln -s /prebuilt_tools/staging_dir/host staging_dir/host
+          ln -s /prebuilt_tools/build_dir/host build_dir/host
+
+          ./scripts/ext-tools.sh --refresh
+
+      - name: Update & Install feeds
+        if: inputs.include_feeds == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          ./scripts/feeds update -a
+          ./scripts/feeds install -a
+
       - name: Cache ccache
         uses: actions/cache@v3
         with:
           path: openwrt/.ccache
-          key: ccache-kernel-${{ env.TARGET }}/${{ env.SUBTARGET }}-${{ needs.setup_build.outputs.ccache_hash }}
+          key: ccache-kernel-${{ inputs.target }}/${{ inputs.subtarget }}-${{ needs.setup_build.outputs.ccache_hash }}
           restore-keys: |
-            ccache-kernel-${{ env.TARGET }}/${{ env.SUBTARGET }}-
+            ccache-kernel-${{ inputs.target }}/${{ inputs.subtarget }}-
 
       - name: Download external toolchain/sdk
         if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type != 'internal'
         shell: su buildbot -c "sh -e {0}"
         working-directory: openwrt
         run: |
-          wget -O - https://downloads.cdn.openwrt.org/${{ env.TOOLCHAIN_PATH }}/targets/${{ env.TARGET }}/${{ env.SUBTARGET }}/${{ env.TOOLCHAIN_FILE }}.tar.xz \
+          wget -O - https://downloads.cdn.openwrt.org/${{ env.TOOLCHAIN_PATH }}/targets/${{ inputs.target }}/${{ inputs.subtarget }}/${{ env.TOOLCHAIN_FILE }}.tar.xz \
             | tar --xz -xf -
 
       - name: Configure testing kernel
@@ -289,7 +285,7 @@ jobs:
           ./scripts/ext-toolchain.sh \
             --toolchain ${{ env.TOOLCHAIN_FILE }}/toolchain-* \
             --overwrite-config \
-            --config ${{ env.TARGET }}/${{ env.SUBTARGET }}
+            --config ${{ inputs.target }}/${{ inputs.subtarget }}
 
       - name: Adapt external sdk to external toolchain format
         if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk'
@@ -331,7 +327,7 @@ jobs:
           ./scripts/ext-toolchain.sh \
             --toolchain ${{ env.TOOLCHAIN_FILE }}/staging_dir/toolchain-* \
             --overwrite-config \
-            --config ${{ env.TARGET }}/${{ env.SUBTARGET }}
+            --config ${{ inputs.target }}/${{ inputs.subtarget }}
 
       - name: Configure internal toolchain
         if: inputs.build_toolchain == true || steps.parse-toolchain.outputs.toolchain-type == 'internal'
@@ -342,8 +338,8 @@ jobs:
           echo CONFIG_AUTOREMOVE=y >> .config
           echo CONFIG_CCACHE=y >> .config
 
-          echo "CONFIG_TARGET_${{ env.TARGET }}=y" >> .config
-          echo "CONFIG_TARGET_${{ env.TARGET }}_${{ env.SUBTARGET }}=y" >> .config
+          echo "CONFIG_TARGET_${{ inputs.target }}=y" >> .config
+          echo "CONFIG_TARGET_${{ inputs.target }}_${{ inputs.subtarget }}=y" >> .config
 
           make defconfig
 
@@ -435,5 +431,5 @@ jobs:
         if: failure()
         uses: actions/upload-artifact@v3
         with:
-          name: ${{ env.TARGET }}-${{ env.SUBTARGET }}-logs
+          name: ${{ inputs.target }}-${{ inputs.subtarget }}-logs
           path: "openwrt/logs"

.github/workflows/check-kernel-patches.yml

@@ -6,6 +6,9 @@ on:
       target:
         required: true
         type: string
+      subtarget:
+        required: true
+        type: string
       testing:
         type: boolean
       use_openwrt_container:
@@ -85,17 +88,6 @@ jobs:
         run: |
           chown -R buildbot:buildbot openwrt
 
-      - name: Opt-out from Git stricter repository ownership checks
-        run: |
-          git config --global --add safe.directory '*'
-
-      - name: Initialization environment
-        run: |
-          TARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 1)
-          SUBTARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 2)
-          echo "TARGET=$TARGET" >> "$GITHUB_ENV"
-          echo "SUBTARGET=$SUBTARGET" >> "$GITHUB_ENV"
-
       - name: Prepare prebuilt tools
         shell: su buildbot -c "sh -e {0}"
         working-directory: openwrt
@@ -122,8 +114,8 @@ jobs:
           echo CONFIG_AUTOREMOVE=y >> .config
           echo CONFIG_CCACHE=y >> .config
 
-          echo "CONFIG_TARGET_${{ env.TARGET }}=y" >> .config
-          echo "CONFIG_TARGET_${{ env.TARGET }}_${{ env.SUBTARGET }}=y" >> .config
+          echo "CONFIG_TARGET_${{ inputs.target }}=y" >> .config
+          echo "CONFIG_TARGET_${{ inputs.target }}_${{ inputs.subtarget }}=y" >> .config
 
           make defconfig
 
@@ -138,18 +130,19 @@ jobs:
         run: make target/linux/refresh V=s
 
       - name: Validate Refreshed Kernel Patches
+        shell: su buildbot -c "sh -e {0}"
         working-directory: openwrt
         run: |
           . .github/workflows/scripts/ci_helpers.sh
 
           if git diff --name-only --exit-code; then
-            success "Kernel patches for ${{ env.TARGET }}/${{ env.SUBTARGET }} seems ok"
+            success "Kernel patches for ${{ inputs.target }}/${{ inputs.subtarget }} seems ok"
           else
-            err "Kernel patches for ${{ env.TARGET }}/${{ env.SUBTARGET }} require refresh. (run 'make target/linux/refresh' and force push this pr)"
+            err "Kernel patches for ${{ inputs.target }}/${{ inputs.subtarget }} require refresh. (run 'make target/linux/refresh' and force push this pr)"
             err "You can also check the provided artifacts with the refreshed patch from this CI run."
-            mkdir ${{ env.TARGET }}-${{ env.SUBTARGET }}-refreshed
+            mkdir ${{ inputs.target }}-${{ inputs.subtarget }}-refreshed
             for f in $(git diff --name-only); do
-              cp --parents $f ${{ env.TARGET }}-${{ env.SUBTARGET }}-refreshed/
+              cp --parents $f ${{ inputs.target }}-${{ inputs.subtarget }}-refreshed/
             done
             exit 1
           fi
@@ -158,5 +151,5 @@ jobs:
         if: failure()
         uses: actions/upload-artifact@v3
         with:
-          name: ${{ env.TARGET }}-${{ env.SUBTARGET }}-refreshed
-          path: openwrt/${{ env.TARGET }}-${{ env.SUBTARGET }}-refreshed
+          name: ${{ inputs.target }}-${{ inputs.subtarget }}-refreshed
+          path: openwrt/${{ inputs.target }}-${{ inputs.subtarget }}-refreshed

.github/workflows/coverity.yml

@@ -17,7 +17,8 @@ jobs:
       packages: read
     uses: ./.github/workflows/build.yml
     with:
-      target: x86/64
+      target: x86
+      subtarget: 64
       build_full: true
       include_feeds: true
       coverity_compiler_template_list: >-

.github/workflows/kernel.yml

@@ -64,8 +64,9 @@ jobs:
             if echo "$CHANGED_FILES" | grep -v -q target/linux ||
               echo "$CHANGED_FILES" | grep -q target/linux/generic ||
               echo "$CHANGED_FILES" | grep -q $(echo $TARGET | cut -d "/" -f 1); then
+              TUPLE='{"target":"'"$(echo $TARGET | cut -d "/" -f 1)"'","subtarget":"'"$(echo $TARGET | cut -d "/" -f 2)"'"}'
               [[ $FIRST -ne 1 ]] && JSON_TARGETS_SUBTARGETS="$JSON_TARGETS_SUBTARGETS"','
-              JSON_TARGETS_SUBTARGETS="$JSON_TARGETS_SUBTARGETS"'"'"${TARGET}"'"'
+              JSON_TARGETS_SUBTARGETS="$JSON_TARGETS_SUBTARGETS""$TUPLE"
               FIRST=0
             fi
           done
@@ -77,8 +78,9 @@ jobs:
             if echo "$CHANGED_FILES" | grep -v -q target/linux ||
               echo "$CHANGED_FILES" | grep -q target/linux/generic ||
               echo "$CHANGED_FILES" | grep -q $(echo $TARGET | cut -d "/" -f 1); then
+              TUPLE='{"target":"'"$(echo $TARGET | cut -d "/" -f 1)"'","subtarget":"'"$(echo $TARGET | cut -d "/" -f 2)"'"}'
               [[ $FIRST -ne 1 ]] && JSON_TARGETS="$JSON_TARGETS"','
-              JSON_TARGETS="$JSON_TARGETS"'"'"${TARGET}"'"'
+              JSON_TARGETS="$JSON_TARGETS""$TUPLE"
               FIRST=0
             fi
           done
@@ -104,10 +106,11 @@ jobs:
     strategy:
        fail-fast: False
        matrix:
-         target: ${{fromJson(needs.determine_targets.outputs.targets_subtargets)}}
+         include: ${{fromJson(needs.determine_targets.outputs.targets_subtargets)}}
     uses: ./.github/workflows/build.yml
     with:
       target: ${{ matrix.target }}
+      subtarget: ${{ matrix.subtarget }}
       build_kernel: true
       build_all_kmods: true
 
@@ -120,8 +123,9 @@ jobs:
     strategy:
        fail-fast: False
        matrix:
-         target: ${{fromJson(needs.determine_targets.outputs.targets)}}
+         include: ${{fromJson(needs.determine_targets.outputs.targets)}}
     uses: ./.github/workflows/check-kernel-patches.yml
     with:
       target: ${{ matrix.target }}
+      subtarget: ${{ matrix.subtarget }}
 

.github/workflows/label-kernel.yml

@@ -13,6 +13,7 @@ jobs:
     runs-on: ubuntu-latest
     outputs:
       target: ${{ steps.set_target.outputs.target }}
+      subtarget: ${{ steps.set_target.outputs.subtarget }}
 
     steps:
       - name: Set target
@@ -20,7 +21,8 @@ jobs:
         env:
           CI_EVENT_LABEL_NAME: ${{ github.event.label.name }}
         run: |
-          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/target="\1\/\2"/p' | tee --append $GITHUB_OUTPUT
+          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/target=\1/p' | tee --append $GITHUB_OUTPUT
+          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/subtarget=\2/p' | tee --append $GITHUB_OUTPUT
 
   build_kernel:
     name: Build Kernel with external toolchain
@@ -30,7 +32,9 @@ jobs:
       packages: read
     uses: ./.github/workflows/build.yml
     with:
+      container_name: toolchain
       target: ${{ needs.set_target.outputs.target }}
+      subtarget: ${{ needs.set_target.outputs.subtarget }}
       build_kernel: true
       build_all_kmods: true
 
@@ -43,3 +47,4 @@ jobs:
     uses: ./.github/workflows/check-kernel-patches.yml
     with:
       target: ${{ needs.set_target.outputs.target }}
+      subtarget: ${{ needs.set_target.outputs.subtarget }}

.github/workflows/label-target.yml

@@ -13,6 +13,7 @@ jobs:
     runs-on: ubuntu-latest
     outputs:
       target: ${{ steps.set_target.outputs.target }}
+      subtarget: ${{ steps.set_target.outputs.subtarget }}
 
     steps:
       - name: Set target
@@ -20,7 +21,8 @@ jobs:
         env:
           CI_EVENT_LABEL_NAME: ${{ github.event.label.name }}
         run: |
-          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/target="\1\/\2"/p' | tee --append $GITHUB_OUTPUT
+          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/target=\1/p' | tee --append $GITHUB_OUTPUT
+          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/subtarget=\2/p' | tee --append $GITHUB_OUTPUT
 
   build_target:
     name: Build target
@@ -30,7 +32,9 @@ jobs:
       packages: read
     uses: ./.github/workflows/build.yml
     with:
+      container_name: toolchain
       target: ${{ needs.set_target.outputs.target }}
+      subtarget: ${{ needs.set_target.outputs.subtarget }}
       build_full: true
       build_all_kmods: true
       build_all_boards: true

.github/workflows/packages.yml

@@ -37,11 +37,14 @@ jobs:
       fail-fast: False
       matrix:
         include:
-          - target: malta/be
-          - target: x86/64
+          - target: malta
+            subtarget: be
+          - target: x86
+            subtarget: 64
     uses: ./.github/workflows/build.yml
     with:
       target: ${{ matrix.target }}
+      subtarget: ${{ matrix.subtarget }}
       build_kernel: true
       build_all_kmods: true
       build_all_modules: true

.github/workflows/push-containers.yml

@@ -3,6 +3,7 @@ name: Build and Push prebuilt tools container
 on:
   push:
     paths:
+      - 'include/version.mk'
       - 'tools/**'
       - '.github/workflows/build-tools.yml'
       - '.github/workflows/push-containers.yml'

.github/workflows/toolchain.yml

@@ -40,8 +40,9 @@ jobs:
           JSON='['
           FIRST=1
           for TARGET in $TARGETS; do
+            TUPLE='{"target":"'"$(echo $TARGET | cut -d "/" -f 1)"'","subtarget":"'"$(echo $TARGET | cut -d "/" -f 2)"'"}'
             [[ $FIRST -ne 1 ]] && JSON="$JSON"','
-            JSON="$JSON"'"'"${TARGET}"'"'
+            JSON="$JSON""$TUPLE"
             FIRST=0
           done
           JSON="$JSON"']'
@@ -61,8 +62,9 @@ jobs:
     strategy:
        fail-fast: False
        matrix:
-         target: ${{fromJson(needs.determine_targets.outputs.target)}}
+         include: ${{fromJson(needs.determine_targets.outputs.target)}}
     uses: ./.github/workflows/build.yml
     with:
       target: ${{ matrix.target }}
+      subtarget: ${{ matrix.subtarget }}
       build_toolchain: true

.github/workflows/tools.yml

@@ -3,11 +3,13 @@ name: Build host tools
 on:
   pull_request:
     paths:
+      - 'include/**'
       - 'tools/**'
       - '.github/workflows/build-tools.yml'
       - '.github/workflows/tools.yml'
   push:
     paths:
+      - 'include/**'
       - 'tools/**'
       - '.github/workflows/build-tools.yml'
       - '.github/workflows/tools.yml'

Makefile

@@ -15,6 +15,8 @@ $(if $(findstring $(space),$(TOPDIR)),$(error ERROR: The path to the OpenWrt dir
 world:
 
 DISTRO_PKG_CONFIG:=$(shell $(TOPDIR)/scripts/command_all.sh pkg-config | grep '/usr' -m 1)
+
+export ORIG_PATH:=$(if $(ORIG_PATH),$(ORIG_PATH),$(PATH))
 export PATH:=$(if $(STAGING_DIR),$(abspath $(STAGING_DIR)/../host/bin),$(TOPDIR)/staging_dir/host/bin):$(PATH)
 
 ifneq ($(OPENWRT_BUILD),1)

config/Config-images.in

@@ -204,11 +204,12 @@ menu "Target Images"
 
 	config GRUB_EFI_IMAGES
 		bool "Build GRUB EFI images (Linux x86 or x86_64 host only)"
-		depends on TARGET_x86
+		depends on TARGET_x86 || TARGET_armsr
 		depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
-		select PACKAGE_grub2
-		select PACKAGE_grub2-efi
-		select PACKAGE_grub2-bios-setup
+		select PACKAGE_grub2 if TARGET_x86
+		select PACKAGE_grub2-efi if TARGET_x86
+		select PACKAGE_grub2-bios-setup if TARGET_x86
+		select PACKAGE_grub2-efi-arm if TARGET_armsr
 		select PACKAGE_kmod-fs-vfat
 		default y
 
@@ -266,7 +267,7 @@ menu "Target Images"
 
 	config VMDK_IMAGES
 		bool "Build VMware image files (VMDK)"
-		depends on TARGET_x86
+		depends on TARGET_x86 || TARGET_armsr
 		depends on GRUB_IMAGES || GRUB_EFI_IMAGES
 		select PACKAGE_kmod-e1000
 
@@ -278,7 +279,7 @@ menu "Target Images"
 
 	config TARGET_IMAGES_GZIP
 		bool "GZip images"
-		depends on TARGET_ROOTFS_EXT4FS || TARGET_x86 || TARGET_armvirt || TARGET_malta
+		depends on TARGET_ROOTFS_EXT4FS || TARGET_x86 || TARGET_armsr || TARGET_malta
 		default y
 
 	comment "Image Options"
@@ -291,6 +292,7 @@ menu "Target Images"
 		depends on USES_BOOT_PART
 		default 8 if TARGET_apm821xx_sata
 		default 64 if TARGET_bcm27xx
+		default 128 if TARGET_armsr
 		default 16
 
 	config TARGET_ROOTFS_PARTSIZE

config/Config-kernel.in

@@ -373,16 +373,6 @@ config KERNEL_DEBUG_INFO_BTF
 
 	  Required to run BPF CO-RE applications.
 
-config KERNEL_MODULE_ALLOW_BTF_MISMATCH
-	bool "Allow loading modules with non-matching BTF type info"
-	depends on KERNEL_DEBUG_INFO_BTF
-	help
-	  For modules whose split BTF does not match vmlinux, load without
-	  BTF rather than refusing to load. The default behavior with
-	  module BTF enabled is to reject modules with such mismatches;
-	  this option will still load module BTF where possible but ignore
-	  it when a mismatch is found.
-
 config KERNEL_DEBUG_INFO_REDUCED
 	bool "Reduce debugging information"
 	default y
@@ -397,6 +387,17 @@ config KERNEL_DEBUG_INFO_REDUCED
 	  DEBUG_INFO build and compile times are reduced too.
 	  Only works with newer gcc versions.
 
+config KERNEL_FRAME_WARN
+	int
+	range 0 8192
+	default 1280 if KERNEL_KASAN && !ARCH_64BIT
+	default 1024 if !ARCH_64BIT
+	default 2048 if ARCH_64BIT
+	help
+	  Tell the compiler to warn at build time for stack frames larger than this.
+	  Setting this too low will cause a lot of warnings.
+	  Setting it to 0 disables the warning.
+
 # KERNEL_DEBUG_LL symbols must have the default value set as otherwise
 # KConfig wont evaluate them unless KERNEL_EARLY_PRINTK is selected
 # which means that buildroot wont override the DEBUG_LL symbols in target

feeds.conf.default

@@ -1,8 +1,4 @@
-src-git-full packages https://git.openwrt.org/feed/packages.git
-src-git-full luci https://git.openwrt.org/project/luci.git
-src-git-full routing https://git.openwrt.org/feed/routing.git
-src-git-full telephony https://git.openwrt.org/feed/telephony.git
-#src-git-full video https://github.com/openwrt/video.git
-#src-git-full targets https://github.com/openwrt/targets.git
-#src-git-full oldpackages http://git.openwrt.org/packages.git
-#src-link custom /usr/src/openwrt/custom-feed
+src-git packages https://git.openwrt.org/feed/packages.git^8939b43659dabe9b737feee02976949ad0355adc
+src-git luci https://git.openwrt.org/project/luci.git^3e14e055a177dec4bd3a4bd40883b56a6930fd7c
+src-git routing https://git.openwrt.org/feed/routing.git^6bbcdd7f1fda46a370226ad1fc794e690974339c
+src-git telephony https://git.openwrt.org/feed/telephony.git^129c8e0a9d68a39ad2dd550cf79dc8fc678f4a38

include/host-build.mk

@@ -26,6 +26,7 @@ HOST_STAMP_CONFIGURED:=$(HOST_BUILD_DIR)/.configured
 HOST_STAMP_BUILT:=$(HOST_BUILD_DIR)/.built
 HOST_BUILD_PREFIX?=$(if $(IS_PACKAGE_BUILD),$(STAGING_DIR_HOSTPKG),$(STAGING_DIR_HOST))
 HOST_STAMP_INSTALLED:=$(HOST_BUILD_PREFIX)/stamp/.$(PKG_NAME)_installed
+HOST_STAMP_PROGRAMS:=$(foreach program,$(PKG_PROGRAMS),$(subst $(PKG_NAME),$(program),$(HOST_STAMP_INSTALLED)) )
 
 override MAKEFLAGS=
 
@@ -131,6 +132,7 @@ define Host/Exports/Default
   $(1) : export STAGING_PREFIX=$$(HOST_BUILD_PREFIX)
   $(1) : export PKG_CONFIG_PATH=$$(STAGING_DIR_HOST)/lib/pkgconfig:$$(HOST_BUILD_PREFIX)/lib/pkgconfig
   $(1) : export PKG_CONFIG_LIBDIR=$$(HOST_BUILD_PREFIX)/lib/pkgconfig
+  $(1) : export GIT_CEILING_DIRECTORIES=$$(BUILD_DIR_HOST)
   $(if $(HOST_CONFIG_SITE),$(1) : export CONFIG_SITE:=$(HOST_CONFIG_SITE))
   $(if $(IS_PACKAGE_BUILD),$(1) : export PATH=$$(TARGET_PATH_PKG))
 endef
@@ -171,7 +173,7 @@ ifndef DUMP
 		$(foreach hook,$(Hooks/HostInstall/Post),$(call $(hook))$(sep))
 		mkdir -p $$(shell dirname $$@)
 		touch $(HOST_STAMP_BUILT)
-		touch $$@
+		touch $$@ $(HOST_STAMP_PROGRAMS)
 
   $(call DefaultTargets,$(patsubst %,host-%,$(DEFAULT_SUBDIR_TARGETS)))
   ifndef STAMP_BUILT
@@ -186,7 +188,7 @@ ifndef DUMP
 
   $(_host_target)host-prepare: $(HOST_STAMP_PREPARED)
   $(_host_target)host-configure: $(HOST_STAMP_CONFIGURED)
-  $(_host_target)host-compile: $(HOST_STAMP_BUILT) $(HOST_STAMP_INSTALLED)
+  $(_host_target)host-compile: $(HOST_STAMP_BUILT) $(HOST_STAMP_INSTALLED) $(HOST_STAMP_PROGRAMS)
   host-install: host-compile
 
   host-clean-build: FORCE
@@ -195,7 +197,7 @@ ifndef DUMP
 
   host-clean: host-clean-build
 	$(call Host/Clean)
-	rm -rf $(HOST_STAMP_INSTALLED)
+	rm -rf $(HOST_STAMP_INSTALLED) $(HOST_STAMP_PROGRAMS)
 
     ifneq ($(CONFIG_AUTOREMOVE),)
       host-compile:

include/image-commands.mk

@@ -307,7 +307,7 @@ define Build/fit
 		$(if $(DEVICE_FDT_NUM),-n $(DEVICE_FDT_NUM)) \
 		$(if $(DEVICE_DTS_DELIMITER),-l $(DEVICE_DTS_DELIMITER)) \
 		$(if $(DEVICE_DTS_LOADADDR),-s $(DEVICE_DTS_LOADADDR)) \
-		$(if $(DEVICE_DTS_OVERLAY),$(foreach dtso,$(DEVICE_DTS_OVERLAY), -O $(dtso):$(KERNEL_BUILD_DIR)/image-$(dtso).dtb)) \
+		$(if $(DEVICE_DTS_OVERLAY),$(foreach dtso,$(DEVICE_DTS_OVERLAY), -O $(dtso):$(KERNEL_BUILD_DIR)/image-$(dtso).dtbo)) \
 		-c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config-1") \
 		-A $(LINUX_KARCH) -v $(LINUX_VERSION)
 	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage $(if $(findstring external,$(word 3,$(1))),\

include/image.mk

@@ -146,7 +146,7 @@ endif
 
 
 # Disable noisy checks by default as in upstream
-DTC_FLAGS += \
+DTC_WARN_FLAGS := \
   -Wno-unit_address_vs_reg \
   -Wno-simple_bus_reg \
   -Wno-unit_address_format \
@@ -159,6 +159,9 @@ DTC_FLAGS += \
   -Wno-graph_port \
   -Wno-unique_unit_address
 
+DTC_FLAGS += $(DTC_WARN_FLAGS)
+DTCO_FLAGS += $(DTC_WARN_FLAGS)
+
 define Image/pad-to
 	dd if=$(1) of=$(1).new bs=$(2) conv=sync
 	mv $(1).new $(1)
@@ -174,7 +177,7 @@ endef
 # $(2) target dtb file
 # $(3) extra CPP flags
 # $(4) extra DTC flags
-define Image/BuildDTB
+define Image/BuildDTB/sub
 	$(TARGET_CROSS)cpp -nostdinc -x assembler-with-cpp \
 		$(DTS_CPPFLAGS) \
 		-I$(DTS_DIR) \
@@ -183,12 +186,20 @@ define Image/BuildDTB
 		-undef -D__DTS__ $(3) \
 		-o $(2).tmp $(1)
 	$(LINUX_DIR)/scripts/dtc/dtc -O dtb \
-		-i$(dir $(1)) $(DTC_FLAGS) $(4) \
+		-i$(dir $(1)) $(4) \
 	$(if $(CONFIG_HAS_DT_OVERLAY_SUPPORT),-@) \
 		-o $(2) $(2).tmp
 	$(RM) $(2).tmp
 endef
 
+define Image/BuildDTB
+	$(call Image/BuildDTB/sub,$(1),$(2),$(3),$(DTC_FLAGS) $(DEVICE_DTC_FLAGS) $(4))
+endef
+
+define Image/BuildDTBO
+	$(call Image/BuildDTB/sub,$(1),$(2),$(3),$(DTCO_FLAGS) $(DEVICE_DTCO_FLAGS) $(4))
+endef
+
 define Image/mkfs/jffs2/sub-raw
 	$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
 		$(2) \
@@ -400,6 +411,8 @@ define Device/Init
   DEVICE_DTS_LOADADDR :=
   DEVICE_DTS_OVERLAY :=
   DEVICE_FDT_NUM :=
+  DEVICE_DTC_FLAGS :=
+  DEVICE_DTCO_FLAGS :=
   SOC :=
 
   BOARD_NAME :=
@@ -422,9 +435,9 @@ endef
 DEFAULT_DEVICE_VARS := \
   DEVICE_NAME KERNEL KERNEL_INITRAMFS KERNEL_INITRAMFS_IMAGE KERNEL_SIZE \
   CMDLINE UBOOTENV_IN_UBI KERNEL_IN_UBI BLOCKSIZE PAGESIZE SUBPAGESIZE \
-  VID_HDR_OFFSET UBINIZE_OPTS UBINIZE_PARTS MKUBIFS_OPTS DEVICE_DTS \
-  DEVICE_DTS_CONFIG DEVICE_DTS_DELIMITER DEVICE_DTS_DIR DEVICE_DTS_OVERLAY \
-  DEVICE_DTS_LOADADDR \
+  VID_HDR_OFFSET UBINIZE_OPTS UBINIZE_PARTS MKUBIFS_OPTS DEVICE_DTC_FLAGS \
+  DEVICE_DTCO_FLAGS DEVICE_DTS DEVICE_DTS_CONFIG DEVICE_DTS_DELIMITER \
+  DEVICE_DTS_DIR DEVICE_DTS_OVERLAY DEVICE_DTS_LOADADDR \
   DEVICE_FDT_NUM DEVICE_IMG_PREFIX SOC BOARD_NAME UIMAGE_MAGIC UIMAGE_NAME \
   UIMAGE_TIME SUPPORTED_DEVICES IMAGE_METADATA KERNEL_ENTRY KERNEL_LOADADDR \
   UBOOT_PATH IMAGE_SIZE \
@@ -554,16 +567,33 @@ define Device/Build/dtb
   image_prepare: $(KDIR)/image-$(1).dtb
   endif
 
+endef
+
+define Device/Build/dtbo
+  ifndef BUILD_DTSO_$(1)
+  BUILD_DTSO_$(1) := 1
+  $(KDIR)/image-$(1).dtbo: FORCE
+	$(call Image/BuildDTBO,$(strip $(2))/$(strip $(3)).dtso,$$@)
+
+  image_prepare: $(KDIR)/image-$(1).dtbo
+  endif
+
 endef
 endif
 
 define Device/Build/kernel
-  $$(eval $$(foreach dts,$$(DEVICE_DTS) $$(DEVICE_DTS_OVERLAY), \
+  $$(eval $$(foreach dts,$$(DEVICE_DTS), \
 	$$(call Device/Build/dtb,$$(notdir $$(dts)), \
 		$$(if $$(DEVICE_DTS_DIR),$$(DEVICE_DTS_DIR),$$(DTS_DIR)), \
 		$$(dts) \
 	) \
   ))
+  $$(eval $$(foreach dtso,$$(DEVICE_DTS_OVERLAY), \
+	$$(call Device/Build/dtbo,$$(notdir $$(dtso)), \
+		$$(if $$(DEVICE_DTS_DIR),$$(DEVICE_DTS_DIR),$$(DTS_DIR)), \
+		$$(dtso) \
+	) \
+  ))
 
   $(KDIR)/$$(KERNEL_NAME):: image_prepare
   $$(_TARGET): $$(if $$(KERNEL_INSTALL),$(BIN_DIR)/$$(KERNEL_IMAGE))

include/kernel-5.15

@@ -1,2 +1,2 @@
-LINUX_VERSION-5.15 = .112
-LINUX_KERNEL_HASH-5.15.112 = b0e8ebdba38e0c369f64ec4dc2a69ec59ffe87a64b82f940dbdf8e752b6ad651
+LINUX_VERSION-5.15 = .118
+LINUX_KERNEL_HASH-5.15.118 = 4e6bf4dadb04d5d11d1d4cc37c0eabcf33bc333b7dd3dc2143c3099a823eb5b3

include/kernel-version.mk

@@ -13,6 +13,15 @@ endif
 
 include $(KERNEL_DETAILS_FILE)
 
+ifdef KERNEL_TESTING_PATCHVER
+  KERNEL_TESTING_DETAILS_FILE=$(INCLUDE_DIR)/kernel-$(KERNEL_TESTING_PATCHVER)
+  ifeq ($(wildcard $(KERNEL_TESTING_DETAILS_FILE)),)
+    $(error Missing kernel version/hash file for $(KERNEL_TESTING_PATCHVER). Please create $(KERNEL_TESTING_DETAILS_FILE))
+  endif
+
+  include $(KERNEL_TESTING_DETAILS_FILE)
+endif
+
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
 

include/kernel.mk

@@ -90,6 +90,8 @@ else ifneq (,$(findstring $(ARCH) , mipsel mips64 mips64el ))
   LINUX_KARCH := mips
 else ifneq (,$(findstring $(ARCH) , powerpc64 ))
   LINUX_KARCH := powerpc
+else ifneq (,$(findstring $(ARCH) , riscv64 ))
+  LINUX_KARCH := riscv
 else ifneq (,$(findstring $(ARCH) , sh2 sh3 sh4 ))
   LINUX_KARCH := sh
 else ifneq (,$(findstring $(ARCH) , i386 x86_64 ))

include/package.mk

@@ -194,6 +194,7 @@ define Build/Exports/Default
   $(1) : export CONFIG_SITE:=$$(CONFIG_SITE)
   $(1) : export PKG_CONFIG_PATH:=$$(PKG_CONFIG_PATH)
   $(1) : export PKG_CONFIG_LIBDIR:=$$(PKG_CONFIG_PATH)
+  $(1) : export GIT_CEILING_DIRECTORIES:=$$(BUILD_DIR)
 endef
 Build/Exports=$(Build/Exports/Default)
 

include/prereq-build.mk

@@ -175,8 +175,6 @@ $(eval $(call SetupHostCommand,install,Please install GNU 'install', \
 $(eval $(call SetupHostCommand,perl,Please install Perl 5.x, \
 	perl --version | grep "perl.*v5"))
 
-$(eval $(call CleanupPython2))
-
 $(eval $(call SetupHostCommand,python,Please install Python >= 3.6, \
 	python3.11 -V 2>&1 | grep 'Python 3', \
 	python3.10 -V 2>&1 | grep 'Python 3', \

include/prereq.mk

@@ -28,8 +28,10 @@ define Require
 
     prereq-$(1): $(if $(PREREQ_PREV),prereq-$(PREREQ_PREV)) FORCE
 		printf "Checking '$(1)'... "
-		if $(NO_TRACE_MAKE) -f $(firstword $(MAKEFILE_LIST)) check-$(1) >/dev/null 2>/dev/null; then \
+		if $(NO_TRACE_MAKE) -f $(firstword $(MAKEFILE_LIST)) check-$(1) PATH="$(ORIG_PATH)" >/dev/null 2>/dev/null; then \
 			echo 'ok.'; \
+		elif $(NO_TRACE_MAKE) -f $(firstword $(MAKEFILE_LIST)) check-$(1) PATH="$(ORIG_PATH)" >/dev/null 2>/dev/null; then \
+			echo 'updated.'; \
 		else \
 			echo 'failed.'; \
 			echo "$(PKG_NAME): $(strip $(2))" >> $(TMP_DIR)/.prereq-error; \
@@ -75,18 +77,6 @@ define RequireCHeader
   $$(eval $$(call Require,$(1),$(2)))
 endef
 
-define CleanupPython2
-  define Require/python2-cleanup
-	if [ -f "$(STAGING_DIR_HOST)/bin/python" ] && \
-		$(STAGING_DIR_HOST)/bin/python -V 2>&1 | \
-		grep -q 'Python 2'; then \
-			rm $(STAGING_DIR_HOST)/bin/python; \
-	fi
-  endef
-
-  $$(eval $$(call Require,python2-cleanup))
-endef
-
 define QuoteHostCommand
 '$(subst ','"'"',$(strip $(1)))'
 endef
@@ -107,17 +97,29 @@ endef
 # 3+: candidates
 define SetupHostCommand
   define Require/$(1)
-	[ -f "$(STAGING_DIR_HOST)/bin/$(strip $(1))" ] && exit 0; \
+	mkdir -p "$(STAGING_DIR_HOST)/bin"; \
 	for cmd in $(call QuoteHostCommand,$(3)) $(call QuoteHostCommand,$(4)) \
 	           $(call QuoteHostCommand,$(5)) $(call QuoteHostCommand,$(6)) \
 	           $(call QuoteHostCommand,$(7)) $(call QuoteHostCommand,$(8)) \
 	           $(call QuoteHostCommand,$(9)) $(call QuoteHostCommand,$(10)) \
 	           $(call QuoteHostCommand,$(11)) $(call QuoteHostCommand,$(12)); do \
 		if [ -n "$$$$$$$$cmd" ]; then \
-			bin="$$$$$$$$(PATH="$(subst $(space),:,$(filter-out $(STAGING_DIR_HOST)/%,$(subst :,$(space),$(PATH))))" \
-				command -v "$$$$$$$${cmd%% *}")"; \
+			bin="$$$$$$$$(command -v "$$$$$$$${cmd%% *}")"; \
 			if [ -x "$$$$$$$$bin" ] && eval "$$$$$$$$cmd" >/dev/null 2>/dev/null; then \
-				mkdir -p "$(STAGING_DIR_HOST)/bin"; \
+				case "$$$$$$$$(ls -dl -- $(STAGING_DIR_HOST)/bin/$(strip $(1)))" in \
+					*" -> $$$$$$$$bin"*) \
+						[ -x "$(STAGING_DIR_HOST)/bin/$(strip $(1))" ] && exit 0 \
+						;; \
+					"-"*) \
+						find "$(STAGING_DIR_HOST)/stamp" | grep $(strip $(1)) && \
+						[ -x "$(STAGING_DIR_HOST)/bin/$(strip $(1))" ] && exit 0 \
+						;; \
+					*" -> /"*) \
+						;; \
+					*" -> "*) \
+						[ -x "$(STAGING_DIR_HOST)/bin/$(strip $(1))" ] && exit 0 \
+						;; \
+				esac; \
 				ln -sf "$$$$$$$$bin" "$(STAGING_DIR_HOST)/bin/$(strip $(1))"; \
 				exit 0; \
 			fi; \

include/scan.mk

@@ -11,6 +11,7 @@ TARGET_STAMP:=$(TMP_DIR)/info/.files-$(SCAN_TARGET).stamp
 FILELIST:=$(TMP_DIR)/info/.files-$(SCAN_TARGET)-$(SCAN_COOKIE)
 OVERRIDELIST:=$(TMP_DIR)/info/.overrides-$(SCAN_TARGET)-$(SCAN_COOKIE)
 
+export ORIG_PATH:=$(if $(ORIG_PATH),$(ORIG_PATH),$(PATH))
 export PATH:=$(STAGING_DIR_HOST)/bin:$(PATH)
 
 define feedname

include/site/riscv64

@@ -0,0 +1,30 @@
+#!/bin/sh
+. $TOPDIR/include/site/linux
+ac_cv_c_littleendian=${ac_cv_c_littleendian=yes}
+ac_cv_c_bigendian=${ac_cv_c_bigendian=no}
+
+ac_cv_sizeof___int64=8
+ac_cv_sizeof_char=1
+ac_cv_sizeof_int=4
+ac_cv_sizeof_int16_t=2
+ac_cv_sizeof_int32_t=4
+ac_cv_sizeof_int64_t=8
+ac_cv_sizeof_long_int=8
+ac_cv_sizeof_long_long=8
+ac_cv_sizeof_long=8
+ac_cv_sizeof_off_t=8
+ac_cv_sizeof_short_int=2
+ac_cv_sizeof_short=2
+ac_cv_sizeof_size_t=8
+ac_cv_sizeof_ssize_t=8
+ac_cv_sizeof_u_int16_t=2
+ac_cv_sizeof_u_int32_t=4
+ac_cv_sizeof_u_int64_t=8
+ac_cv_sizeof_uint16_t=2
+ac_cv_sizeof_uint32_t=4
+ac_cv_sizeof_uint64_t=8
+ac_cv_sizeof_unsigned_int=4
+ac_cv_sizeof_unsigned_long=8
+ac_cv_sizeof_unsigned_long_long=8
+ac_cv_sizeof_unsigned_short=2
+ac_cv_sizeof_void_p=8

include/target.mk

@@ -260,6 +260,10 @@ ifeq ($(DUMP),1)
     CPU_CFLAGS_arc700 = -mcpu=arc700
     CPU_CFLAGS_archs = -mcpu=archs
   endif
+  ifeq ($(ARCH),riscv64)
+    CPU_TYPE ?= riscv64
+    CPU_CFLAGS_riscv64:=-mabi=lp64d -march=rv64imafdc
+  endif
   ifneq ($(CPU_TYPE),)
     ifndef CPU_CFLAGS_$(CPU_TYPE)
       $(warning CPU_TYPE "$(CPU_TYPE)" doesn't correspond to a known type)

include/toplevel.mk

@@ -50,6 +50,7 @@ space:= $(empty) $(empty)
 path:=$(subst :,$(space),$(PATH))
 path:=$(filter-out .%,$(path))
 path:=$(subst $(space),:,$(path))
+export ORIG_PATH:=$(if $(ORIG_PATH),$(ORIG_PATH),$(PATH))
 export PATH:=$(path)
 export STAGING_DIR_HOST:=$(if $(STAGING_DIR),$(abspath $(STAGING_DIR)/../host),$(TOPDIR)/staging_dir/host)
 

include/u-boot.mk

@@ -83,6 +83,9 @@ endef
 
 define Build/Configure/U-Boot
 	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) $(UBOOT_CONFIGURE_VARS) $(UBOOT_CONFIG)_config
+	$(if $(strip $(UBOOT_CUSTOMIZE_CONFIG)),
+		$(PKG_BUILD_DIR)/scripts/config --file $(PKG_BUILD_DIR)/.config $(UBOOT_CUSTOMIZE_CONFIG)
+		+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) $(UBOOT_CONFIGURE_VARS) oldconfig)
 endef
 
 DTC=$(wildcard $(LINUX_DIR)/scripts/dtc/dtc)

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),SNAPSHOT)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),23.05.0-rc2)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),$(REVISION))
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r23228-cd17d8df2a)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/snapshots)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/23.05.0-rc2)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/base-files/files/etc/sysctl.d/10-default.conf

@@ -9,6 +9,7 @@ fs.protected_hardlinks=1
 fs.protected_symlinks=1
 
 net.core.bpf_jit_enable=1
+net.core.bpf_jit_kallsyms=1
 
 net.ipv4.conf.default.arp_ignore=1
 net.ipv4.conf.all.arp_ignore=1

package/base-files/files/lib/upgrade/nand.sh

@@ -301,6 +301,7 @@ nand_upgrade_fit() {
 nand_upgrade_tar() {
 	local tar_file="$1"
 	local gz="$2"
+	local jffs2_markers="${CI_JFFS2_CLEAN_MARKERS:-0}"
 
 	# WARNING: This fails if tar contains more than one 'sysupgrade-*' directory.
 	local board_dir="$(tar t${gz}f "$tar_file" | grep -m 1 '^sysupgrade-.*/$')"
@@ -329,6 +330,7 @@ nand_upgrade_tar() {
 			ubi_kernel_length="$kernel_length"
 		fi
 	fi
+
 	local has_env=0
 	nand_upgrade_prepare_ubi "$rootfs_length" "$rootfs_type" "$ubi_kernel_length" "$has_env" || return 1
 
@@ -340,8 +342,14 @@ nand_upgrade_tar() {
 	fi
 	if [ "$kernel_length" ]; then
 		if [ "$kernel_mtd" ]; then
-			tar xO${gz}f "$tar_file" "$board_dir/kernel" | \
-				mtd write - "$CI_KERNPART"
+			if [ "$jffs2_markers" = 1 ]; then
+				flash_erase -j "/dev/mtd${kernel_mtd}" 0 0
+				tar xO${gz}f "$tar_file" "$board_dir/kernel" | \
+					nandwrite "/dev/mtd${kernel_mtd}" -
+			else
+				tar xO${gz}f "$tar_file" "$board_dir/kernel" | \
+					mtd write - "$CI_KERNPART"
+			fi
 		else
 			local ubidev="$( nand_find_ubi "${CI_KERN_UBIPART:-$CI_UBIPART}" )"
 			local kern_ubivol="$( nand_find_volume $ubidev "$CI_KERNPART" )"

package/base-files/image-config.in

@@ -190,7 +190,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/snapshots"
+		default "https://downloads.openwrt.org/releases/23.05.0-rc2"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:
@@ -266,7 +266,7 @@ if VERSIONOPT
 	config VERSION_CODE_FILENAMES
 		bool
 		prompt "Revision code in filenames"
-		default y
+		default n
 		help
 			Enable this to include the revision identifier or the configured
 			version code into the firmware image, SDK- and Image Builder archive

package/boot/arm-trusted-firmware-mediatek/Makefile

@@ -30,6 +30,7 @@ define Trusted-Firmware-A/Default
   DDR3_FLYBY:=
   DDR_TYPE:=
   NAND_TYPE:=
+  BOARD_QFN:=
 endef
 
 define Trusted-Firmware-A/mt7622-nor-1ddr
@@ -92,6 +93,46 @@ define Trusted-Firmware-A/mt7622-sdmmc-2ddr
   DDR3_FLYBY:=1
 endef
 
+define Trusted-Firmware-A/mt7981-nor-ddr3
+  NAME:=MediaTek MT7981 (SPI-NOR, DDR3)
+  BOOT_DEVICE:=nor
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+endef
+
+define Trusted-Firmware-A/mt7981-emmc-ddr3
+  NAME:=MediaTek MT7981 (eMMC, DDR3)
+  BOOT_DEVICE:=emmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+endef
+
+define Trusted-Firmware-A/mt7981-sdmmc-ddr3
+  NAME:=MediaTek MT7981 (SD card, DDR3)
+  BOOT_DEVICE:=sdmmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+endef
+
+define Trusted-Firmware-A/mt7986-snand-ddr3
+  NAME:=MediaTek MT7981 (SPI-NAND via SNFI, DDR3)
+  BOOT_DEVICE:=snand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+endef
+
+define Trusted-Firmware-A/mt7981-spim-nand-ddr3
+  NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR3)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+endef
+
 define Trusted-Firmware-A/mt7986-nor-ddr4
   NAME:=MediaTek MT7986 (SPI-NOR, DDR4)
   BOOT_DEVICE:=nor
@@ -182,6 +223,11 @@ TFA_TARGETS:= \
 	mt7622-emmc-2ddr \
 	mt7622-sdmmc-1ddr \
 	mt7622-sdmmc-2ddr \
+	mt7981-emmc-ddr3 \
+	mt7981-nor-ddr3 \
+	mt7981-sdmmc-ddr3 \
+	mt7986-snand-ddr3 \
+	mt7981-spim-nand-ddr3 \
 	mt7986-emmc-ddr3 \
 	mt7986-nor-ddr3 \
 	mt7986-sdmmc-ddr3 \
@@ -197,6 +243,7 @@ TFA_MAKE_FLAGS += \
 	BOOT_DEVICE=$(BOOT_DEVICE) \
 	USE_MKIMAGE=1 MKIMAGE=$(STAGING_DIR_HOST)/bin/mkimage \
 	$(if $(findstring ddr4,$(DDR_TYPE)),DRAM_USE_DDR4=1) \
+	$(if $(BOARD_QFN),BOARD_QFN=1,BOARD_BGA=1) \
 	$(if $(NAND_TYPE),NAND_TYPE=$(NAND_TYPE)) \
 	HAVE_DRAM_OBJ_FILE=yes \
 	$(if $(DDR3_FLYBY),DDR3_FLYBY=1) \

package/boot/grub2/Makefile

@@ -33,14 +33,15 @@ include $(INCLUDE_DIR)/package.mk
 define Package/grub2/Default
   CATEGORY:=Boot Loaders
   SECTION:=boot
-  TITLE:=GRand Unified Bootloader ($(1))
+  TITLE:=GRand Unified Bootloader ($(2))
   URL:=http://www.gnu.org/software/grub/
-  DEPENDS:=@TARGET_x86
-  VARIANT:=$(1)
+  DEPENDS:=@TARGET_$(1)
+  VARIANT:=$(2)
 endef
 
-Package/grub2=$(call Package/grub2/Default,pc)
-Package/grub2-efi=$(call Package/grub2/Default,efi)
+Package/grub2=$(call Package/grub2/Default,x86,pc)
+Package/grub2-efi=$(call Package/grub2/Default,x86,efi)
+Package/grub2-efi-arm=$(call Package/grub2/Default,armsr,efi)
 
 define Package/grub2-editenv
   CATEGORY:=Utilities
@@ -107,6 +108,10 @@ ifneq ($(BUILD_VARIANT),none)
   MAKE_PATH := grub-core
 endif
 
+ifeq ($(CONFIG_arm),y)
+  TARGET_CFLAGS := $(filter-out -mfloat-abi=hard,$(TARGET_CFLAGS))
+endif
+
 define Host/Configure
 	$(SED) 's,(RANLIB),(TARGET_RANLIB),' $(HOST_BUILD_DIR)/grub-core/Makefile.in
 	$(Host/Configure/Default)
@@ -162,9 +167,31 @@ define Package/grub2-efi/install
 		-O $(CONFIG_ARCH)-efi \
 		-c ./files/grub-early.cfg \
 		-o $(STAGING_DIR_IMAGE)/grub2/iso-boot$(if $(CONFIG_x86_64),x64,ia32).efi \
-		at_keyboard boot chain configfile fat iso9660 linux ls part_msdos part_gpt reboot serial test efi_gop efi_uga
+		boot chain configfile fat iso9660 linux ls part_msdos part_gpt reboot serial test efi_gop efi_uga
 endef
 
+define Package/grub2-efi-arm/install
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)/grub2
+	cp ./files/grub-early-gpt.cfg $(PKG_BUILD_DIR)/grub-early.cfg
+	$(STAGING_DIR_HOST)/bin/grub-mkimage \
+		-d $(PKG_BUILD_DIR)/grub-core \
+		-p /boot/grub \
+		-O arm$(if $(CONFIG_aarch64),64,)-efi \
+		-c $(PKG_BUILD_DIR)/grub-early.cfg \
+		-o $(STAGING_DIR_IMAGE)/grub2/boot$(if $(CONFIG_aarch64),aa64,arm).efi \
+		boot chain configfile fat linux ls part_gpt part_msdos reboot search \
+		search_fs_uuid search_label serial efi_gop lsefi minicmd ext2
+	$(STAGING_DIR_HOST)/bin/grub-mkimage \
+		-d $(PKG_BUILD_DIR)/grub-core \
+		-p /boot/grub \
+		-O arm$(if $(CONFIG_aarch64),64,)-efi \
+		-c ./files/grub-early.cfg \
+		-o $(STAGING_DIR_IMAGE)/grub2/iso-bootaa$(if $(CONFIG_aarch64),aa64,arm).efi \
+		boot chain configfile fat iso9660 linux ls lsefi minicmd part_msdos part_gpt \
+		reboot serial test efi_gop
+endef
+
+
 define Package/grub2-editenv/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/grub-editenv $(1)/usr/sbin/
@@ -178,5 +205,6 @@ endef
 $(eval $(call HostBuild))
 $(eval $(call BuildPackage,grub2))
 $(eval $(call BuildPackage,grub2-efi))
+$(eval $(call BuildPackage,grub2-efi-arm))
 $(eval $(call BuildPackage,grub2-editenv))
 $(eval $(call BuildPackage,grub2-bios-setup))

package/boot/grub2/files/grub-early-gpt.cfg

@@ -0,0 +1,2 @@
+search --set=root --label kernel
+configfile ($root)/efi/openwrt/grub.cfg

package/boot/opensbi/Makefile

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2022 OpenWrt.org
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=opensbi
+PKG_RELEASE:=1.2
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=https://github.com/riscv/opensbi
+PKG_SOURCE_DATE:=2022-12-24
+PKG_SOURCE_VERSION:=6b5188ca14e59ce7bf71afe4e7d3d557c3d31bf8
+PKG_MIRROR_HASH:=edcdd99da6c62975171981c0aa2b73a27091067da11ccd49816b5ad27d000858
+
+PKG_BUILD_DIR=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_TARGETS:=bin
+PKG_FLAGS:=nonshared
+PKG_LICENSE:=BSD-2-Clause
+PKG_LICENSE_FILES:=COPYING.BSD
+PKG_BUILD_PARALLEL:=1
+
+PKG_MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/opensbi
+    SECTION:=boot
+    CATEGORY:=Boot Loaders
+    DEPENDS:=@TARGET_sifiveu
+    URL:=https://github.com/riscv/opensbi/blob/master/README.md
+    VARIANT:=$(subst _,/,$(subst opensbi_,,$(1)))
+    TITLE:=OpenSBI generic
+    OPENSBI_IMAGE:=
+    PLAT:=
+endef
+
+define Package/opensbi_generic
+  $(Package/opensbi)
+  TITLE:=OpenSBI generic
+  OPENSBI_IMAGE:=fw_dynamic.bin
+  PLAT:=generic
+endef
+
+export GCC_HONOUR_COPTS=s
+
+MAKE_VARS = \
+	CROSS_COMPILE="$(TARGET_CROSS)"
+
+define Build/Compile
+	$(eval $(Package/opensbi_$(BUILD_VARIANT))) \
+		+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) \
+		PLATFORM=$(PLAT)
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(CP) $(PKG_BUILD_DIR)/build/platform/$(PLAT)/firmware/fw_dynamic.bin $(STAGING_DIR_IMAGE)/fw_dynamic-${BUILD_VARIANT}.bin
+endef
+
+$(eval $(call BuildPackage,opensbi_generic))

package/boot/uboot-armsr/Makefile

@@ -0,0 +1,36 @@
+include $(TOPDIR)/rules.mk
+
+PKG_VERSION:=2023.04
+PKG_RELEASE:=1
+
+PKG_HASH:=e31cac91545ff41b71cec5d8c22afd695645cd6e2a442ccdacacd60534069341
+
+include $(INCLUDE_DIR)/u-boot.mk
+include $(INCLUDE_DIR)/package.mk
+
+define U-Boot/Default
+  BUILD_TARGET:=armsr
+endef
+
+define U-Boot/qemu_armv7
+  NAME:=QEMU ARM Virtual Machine 32-bit
+  BUILD_SUBTARGET:=armv7
+  BUILD_DEVICES:=generic
+  UBOOT_CONFIG:=qemu_arm
+endef
+
+define U-Boot/qemu_armv8
+  NAME:=QEMU ARM Virtual Machine 64-bit
+  BUILD_SUBTARGET:=armv8
+  BUILD_DEVICES:=generic
+  UBOOT_CONFIG:=qemu_arm64
+endef
+
+UBOOT_TARGETS := \
+	qemu_armv7 \
+	qemu_armv8
+
+UBOOT_CUSTOMIZE_CONFIG := \
+	--enable CMD_EFIDEBUG
+
+$(eval $(call BuildPackage/U-Boot))

package/boot/uboot-armsr/patches/001-v2023.07-bootstd-Use-blk-uclass-device-numbers-to-set-efi-bootdev.patch

@@ -0,0 +1,62 @@
+From: Simon Glass <sjg@chromium.org>
+To: U-Boot Mailing List <u-boot@lists.denx.de>
+Subject: [PATCH v10 7/9] bootstd: Use blk uclass device numbers to set efi
+ bootdev
+Date: Mon, 24 Apr 2023 13:49:50 +1200
+Message-ID: 
+ <20230424134946.v10.7.Ia5f5e39c882ac22b5f71c4d576941b34e868eeba@changeid>
+
+From: Mathew McBride <matt@traverse.com.au>
+
+When loading a file from a block device, efiload_read_file
+was using the seq_num of the device (e.g "35" of virtio_blk#35)
+instead of the block device id (e.g what you get from running
+the corresponding device scan command, like "virtio 0")
+
+This cause EFI booting from these devices to fail as an
+invalid device number is passed to blk_get_device_part_str:
+
+  Scanning bootdev 'virtio-blk#35.bootdev':
+  distro_efi_read_bootflow_file start (efi,fname=<NULL>)
+  distro_efi_read_bootflow_file start (efi,fname=<NULL>)
+  setting bootdev virtio, 35, efi/boot/bootaa64.efi, 00000000beef9a40, 170800
+  efi_dp_from_name calling blk_get_device_part_str
+  dev=virtio devnr=35 path=efi/boot/bootaa64.efi
+  blk_get_device_part_str (virtio,35)
+  blk_get_device_by_str (virtio, 35)
+  ** Bad device specification virtio 35 **
+  Using default device tree: dtb/qemu-arm.dtb
+  No device tree available
+  0  efi          ready   virtio       1  virtio-blk#35.bootdev.par efi/boot/bootaa64.efi
+  ** Booting bootflow 'virtio-blk#35.bootdev.part_1' with efi
+  blk_get_device_part_str (virtio,0:1)
+  blk_get_device_by_str (virtio, 0)
+  No UEFI binary known at beef9a40 (image buf=00000000beef9a40,addr=0000000000000000)
+  Boot failed (err=-22)
+
+Signed-off-by: Mathew McBride <matt@traverse.com.au>
+Signed-off-by: Simon Glass <sjg@chromium.org>
+Signed-off-by: Petr Štetiar <ynezz@true.cz> [backport to 2023.04]
+---
+
+(no changes since v8)
+
+Changes in v8:
+- Add new patch to use blk uclass device numbers to set efi bootdev
+
+ boot/bootmeth_efi.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/boot/bootmeth_efi.c
++++ b/boot/bootmeth_efi.c
+@@ -117,7 +117,9 @@ static int efiload_read_file(struct blk_
+ 	 * this can go away.
+ 	 */
+ 	media_dev = dev_get_parent(bflow->dev);
+-	snprintf(devnum_str, sizeof(devnum_str), "%x", dev_seq(media_dev));
++	snprintf(devnum_str, sizeof(devnum_str), "%x:%x",
++		 desc ? desc->devnum : dev_seq(media_dev),
++		 bflow->part);
+ 
+ 	strlcpy(dirname, bflow->fname, sizeof(dirname));
+ 	last_slash = strrchr(dirname, '/');

package/boot/uboot-envtools/files/ath79

@@ -27,6 +27,9 @@ araknis,an-700-ap-i-ac|\
 arduino,yun|\
 buffalo,bhr-4grv2|\
 devolo,magic-2-wifi|\
+dlink,dir-859-a1|\
+dlink,dir-859-a3|\
+dlink,dir-869-a1|\
 engenius,eap1200h|\
 engenius,eap1750h|\
 engenius,eap300-v2|\
@@ -90,6 +93,7 @@ zyxel,nbg6616)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
 aruba,ap-105|\
+aruba,ap-115|\
 aruba,ap-175|\
 dongwon,dw02-412h-64m|\
 dongwon,dw02-412h-128m|\

package/boot/uboot-envtools/files/ipq807x

@@ -35,6 +35,11 @@ xiaomi,ax9000)
 	[ -n "$idx2" ] && \
 		ubootenv_add_uci_sys_config "/dev/mtd$idx2" "0x0" "0x10000" "0x20000"
 	;;
+prpl,haze)
+	mmcpart="$(find_mmc_part 0:APPSBLENV)"
+	[ -n "$mmcpart" ] && \
+		ubootenv_add_uci_config "$mmcpart" "0x0" "0x40000" "0x400" "0x100"
+	;;
 qnap,301w)
 	idx="$(find_mtd_index 0:appsblenv)"
 	[ -n "$idx" ] && \

package/boot/uboot-envtools/files/mediatek_filogic

@@ -37,10 +37,14 @@ bananapi,bpi-r3)
 		;;
 	esac
 	;;
+netgear,wax220)
+	ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x20000" "0x20000"
+	;;
 xiaomi,redmi-router-ax6000-stock)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
 	ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
 	;;
+qihoo,360t7|\
 tplink,tl-xdr4288|\
 tplink,tl-xdr6086|\
 tplink,tl-xdr6088|\
@@ -52,6 +56,10 @@ xiaomi,redmi-router-ax6000-ubootmod)
 	ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x20000" "1"
 	ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x20000" "1"
 	;;
+zyxel,ex5601-t0)
+	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
+	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x40000" "2"
+	;;
 esac
 
 config_load ubootenv

package/boot/uboot-envtools/files/ramips

@@ -39,6 +39,7 @@ ampedwireless,ally-r1900k)
 	;;
 beeline,smartbox-giga|\
 beeline,smartbox-turbo|\
+beeline,smartbox-turbo-plus|\
 etisalat,s3|\
 rostelecom,rt-sf-1)
 	ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000"

package/boot/uboot-layerscape/files/fsl_ls1012a-frwy-sdboot-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 fdt_high=0x8fffffff
 initrd_high=0xffffffffffffffff
 sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr

package/boot/uboot-layerscape/files/fsl_ls1012a-rdb-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 bootm_size=0x10000000
 qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
 bootargs=root=/dev/mtdblock8 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(pfe),2m(reserved-2),1m(dtb),16m(kernel),32m(rootfs),49m@0xf00000(firmware)

package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 fdt_high=0x8fffffff
 initrd_high=0xffffffff
 sd_boot=ext4load mmc 0:1 ${loadaddr} fitImage;bootm ${loadaddr}

package/boot/uboot-layerscape/files/fsl_ls1021a-twr-sdboot-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 fdt_high=0x8fffffff
 initrd_high=0xffffffff
 sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr

package/boot/uboot-layerscape/files/fsl_ls1021a-twr-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 bootm_size=0x10000000
 nor_boot=cp.b 60f00000 $fdtaddr 100000;cp.b 61000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
 bootargs=root=/dev/mtdblock6 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=60000000.nor:1m(rcw),2m(u-boot),1m(u-boot-env),11m(reserved-1),1m(dtb),16m(kernel),32m(rootfs),49m@0xf00000(firmware) cma=64M@0x0-0xb0000000

package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-sdboot-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 fdt_high=0x8fffffff
 initrd_high=0xffffffffffffffff
 hwconfig=fsl_ddr:bank_intlv=auto

package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 bootm_size=0x10000000
 hwconfig=fsl_ddr:bank_intlv=auto
 nor_boot=cp.b 60f00000 $fdtaddr 100000;cp.b 61000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr

package/boot/uboot-layerscape/files/fsl_ls1046a-frwy-sdboot-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 bootm_size=0x10000000
 hwconfig=fsl_ddr:bank_intlv=auto
 sd_boot=ext4load mmc 0:1 ${loadaddr} fitImage;bootm ${loadaddr}

package/boot/uboot-layerscape/files/fsl_ls1046a-frwy-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 bootm_size=0x10000000
 hwconfig=fsl_ddr:bank_intlv=auto
 qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr

package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-sdboot-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 fdt_high=0x8fffffff
 initrd_high=0xffffffffffffffff
 hwconfig=fsl_ddr:bank_intlv=auto

package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 bootm_size=0x10000000
 hwconfig=fsl_ddr:bank_intlv=auto
 qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr

package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 fdt_high=0xa0000000
 initrd_high=0xffffffffffffffff
 hwconfig=fsl_ddr:bank_intlv=auto

package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 fdt_high=0xa0000000
 initrd_high=0xffffffffffffffff
 hwconfig=fsl_ddr:bank_intlv=auto

package/boot/uboot-layerscape/files/fsl_ls2088a-rdb-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 fdt_high=0xa0000000
 initrd_high=0xffffffffffffffff
 hwconfig=fsl_ddr:bank_intlv=auto

package/boot/uboot-layerscape/files/fsl_lx2160a-rdb-sdboot-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 bootm_size=0x10000000
 hwconfig=fsl_ddr:bank_intlv=auto
 mc_init=mmc read 80000000 5000 1800;mmc read 80300000 7000 800;fsl_mc start mc 80000000 80300000;mmc read 80400000 6800 800;fsl_mc apply dpl 80400000

package/boot/uboot-layerscape/files/fsl_lx2160a-rdb-uEnv.txt

@@ -1,5 +1,5 @@
 fdtaddr=0x8f000000
-loadaddr=0x81000000
+loadaddr=0x88000000
 bootm_size=0x10000000
 hwconfig=fsl_ddr:bank_intlv=auto
 mc_init=sf probe 0:0;sf read 80000000 a00000 300000;sf read 80300000 e00000 100000;fsl_mc start mc 80000000 80300000;sf read 80400000 d00000 100000;fsl_mc apply dpl 80400000

package/boot/uboot-mediatek/Makefile

@@ -176,6 +176,18 @@ define U-Boot/mt7629_rfb
   UBOOT_CONFIG:=mt7629_rfb
 endef
 
+define U-Boot/mt7981_qihoo_360t7
+  NAME:=Qihoo 360T7
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=qihoo_360t7
+  UBOOT_CONFIG:=mt7981_qihoo-360t7
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7986_rfb
   NAME:=MT7986 Reference Board
   BUILD_SUBTARGET:=filogic
@@ -301,6 +313,7 @@ UBOOT_TARGETS := \
 	mt7628_rfb \
 	ravpower_rp-wd009 \
 	mt7629_rfb \
+	mt7981_qihoo_360t7 \
 	mt7986_bananapi_bpi-r3-emmc \
 	mt7986_bananapi_bpi-r3-sdmmc \
 	mt7986_bananapi_bpi-r3-snand \

package/boot/uboot-mediatek/patches/052-mt7981-enable-pstore.patch

@@ -0,0 +1,38 @@
+--- a/arch/arm/dts/mt7981.dtsi
++++ b/arch/arm/dts/mt7981.dtsi
+@@ -32,6 +32,35 @@
+ 		};
+ 	};
+ 
++	psci {
++		compatible  = "arm,psci-0.2";
++		method      = "smc";
++	};
++
++	reserved-memory {
++		#address-cells = <2>;
++		#size-cells = <2>;
++		ranges;
++
++		/* 64 KiB reserved for ramoops/pstore */
++		ramoops@42ff0000 {
++			compatible = "ramoops";
++			reg = <0 0x42ff0000 0 0x10000>;
++			record-size = <0x1000>;
++		};
++
++		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
++		secmon_reserved: secmon@43000000 {
++			reg = <0 0x43000000 0 0x30000>;
++			no-map;
++		};
++
++		wmcpu_emi: wmcpu-reserved@4fc00000 {
++			no-map;
++			reg = <0 0x4fc00000 0 0x00100000>;
++		};
++	};
++
+ 	gpt_clk: gpt_dummy20m {
+ 		compatible = "fixed-clock";
+ 		clock-frequency = <13000000>;

package/boot/uboot-mediatek/patches/304-mt7981-generic-reset-button-ignore-env.patch

@@ -0,0 +1,43 @@
+--- a/board/mediatek/mt7981/mt7981_rfb.c
++++ b/board/mediatek/mt7981/mt7981_rfb.c
+@@ -6,9 +6,16 @@
+ 
+ #include <common.h>
+ #include <config.h>
++#include <dm.h>
++#include <button.h>
+ #include <env.h>
+ #include <init.h>
+ #include <asm/global_data.h>
++#include <linux/delay.h>
++
++#ifndef CONFIG_RESET_BUTTON_LABEL
++#define CONFIG_RESET_BUTTON_LABEL "reset"
++#endif
+ 
+ #include <mtd.h>
+ #include <linux/mtd/mtd.h>
+@@ -24,7 +31,22 @@ int board_init(void)
+ 
+ int board_late_init(void)
+ {
+-	gd->env_valid = 1; //to load environment variable from persistent store
++	struct udevice *dev;
++
++	gd->env_valid = ENV_VALID;
++	if (!button_get_by_label(CONFIG_RESET_BUTTON_LABEL, &dev)) {
++		puts("reset button found\n");
++#ifdef CONFIG_RESET_BUTTON_SETTLE_DELAY
++		if (CONFIG_RESET_BUTTON_SETTLE_DELAY > 0) {
++			button_get_state(dev);
++			mdelay(CONFIG_RESET_BUTTON_SETTLE_DELAY);
++		}
++#endif
++		if (button_get_state(dev) == BUTTON_ON) {
++			puts("button pushed, resetting environment\n");
++			gd->env_valid = ENV_INVALID;
++		}
++	}
+ 	env_relocate();
+ 	return 0;
+ }

package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch

@@ -173,9 +173,9 @@
 +loadaddr=0x48000000
 +bootargs=root=/dev/mmcblk1p65
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
-+bootconf=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_pcie=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_sata=config-mt7622-bananapi-bpi-r64-sata
++bootconf=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_pcie=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_sata=config-1#mt7622-bananapi-bpi-r64-sata
 +bootdelay=0
 +bootfile=openwrt-mediatek-mt7622-bananapi_bpi-r64-initramfs-recovery.itb
 +bootfile_emmcbl2=openwrt-mediatek-mt7622-bananapi_bpi-r64-emmc-preloader.bin
@@ -412,9 +412,9 @@
 +loadaddr=0x48000000
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
 +bootargs=root=/dev/mmcblk0p65
-+bootconf=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_pcie=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_sata=config-mt7622-bananapi-bpi-r64-sata
++bootconf=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_pcie=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_sata=config-1#mt7622-bananapi-bpi-r64-sata
 +bootdelay=0
 +bootfile=openwrt-mediatek-mt7622-bananapi_bpi-r64-initramfs-recovery.itb
 +bootfile_upg=openwrt-mediatek-mt7622-bananapi_bpi-r64-squashfs-sysupgrade.itb
@@ -619,9 +619,9 @@
 +loadaddr=0x48000000
 +bootargs=root=/dev/ubiblock0_2p1
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
-+bootconf=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_pcie=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_sata=config-mt7622-bananapi-bpi-r64-sata
++bootconf=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_pcie=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_sata=config-1#mt7622-bananapi-bpi-r64-sata
 +bootdelay=0
 +bootfile=openwrt-mediatek-mt7622-bananapi_bpi-r64-initramfs-recovery.itb
 +bootfile_fip=openwrt-mediatek-mt7622-bananapi_bpi-r64-snand-bl31-uboot.fip

package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch

@@ -1118,7 +1118,7 @@
 +
 --- /dev/null
 +++ b/bananapi_bpi-r3_sdmmc_env
-@@ -0,0 +1,75 @@
+@@ -0,0 +1,80 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x46000000
@@ -1126,6 +1126,11 @@
 +bootargs=root=/dev/mmcblk0p65
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
 +bootconf=config-mt7986a-bananapi-bpi-r3
++bootconf_base=config-mt7986a-bananapi-bpi-r3
++bootconf_nor=mt7986a-bananapi-bpi-r3-nor
++bootconf_nand=mt7986a-bananapi-bpi-r3-nand
++bootconf_sd=mt7986a-bananapi-bpi-r3-sd
++bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 +bootdelay=0
 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
@@ -1146,7 +1151,7 @@
 +bootmenu_7=Install bootloader, recovery and production to NAND.=if nand info ; then run ubi_init ; else echo "NAND not detected" ; fi ; run bootmenu_confirm_return
 +bootmenu_8=Reboot.=reset
 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
-+boot_update_conf=if nand info ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-snand ; else if sf probe ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-nor ; else setenv bootconf config-mt7986a-bananapi-bpi-r3 ; fi ; fi
++boot_update_conf=if nand info ; then setenv bootconf $bootconf_base#$bootconf_sd#$bootconf_nand ; else if sf probe ; then setenv bootconf $bootconf_base#$bootconf_sd#$bootconf_nor ; else setenv bootconf $bootconf_base#$bootconf_sd ; fi ; fi
 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 +boot_production=led $bootled_pwr on ; run boot_update_conf ; run sdmmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
@@ -1196,14 +1201,19 @@
 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
 --- /dev/null
 +++ b/bananapi_bpi-r3_nor_env
-@@ -0,0 +1,55 @@
+@@ -0,0 +1,60 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 +bootargs=root=/dev/mtdblock0p1
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_nor ; fi
-+bootconf=config-mt7986a-bananapi-bpi-r3-emmc-nor
++bootconf=config-mt7986a-bananapi-bpi-r3
++bootconf_base=config-mt7986a-bananapi-bpi-r3
++bootconf_nor=mt7986a-bananapi-bpi-r3-nor
++bootconf_nand=mt7986a-bananapi-bpi-r3-nand
++bootconf_sd=mt7986a-bananapi-bpi-r3-sd
++bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 +bootdelay=0
 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-nor-preloader.bin
@@ -1238,7 +1248,7 @@
 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip
 +boot_tftp_write_preloader=tftpboot $loadaddr $bootfile_bl2 && run boot_write_preloader
-+boot_update_conf=if mmc partconf 0 ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-nor ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-nor ; fi
++boot_update_conf=if mmc partconf 0 ; then setenv bootconf $bootconf_base#$bootconf_nor#$bootconf_emmc ; else setenv bootconf $bootconf_base#$bootconf_nor#$bootconf_sd ; fi
 +boot_nor=run boot_production ; run boot_recovery
 +boot_write_fip=mtd erase fip && mtd write fip $loadaddr
 +boot_write_preloader=mtd erase bl2 && mtd write bl2 $loadaddr
@@ -1254,13 +1264,18 @@
 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
 --- /dev/null
 +++ b/bananapi_bpi-r3_snand_env
-@@ -0,0 +1,69 @@
+@@ -0,0 +1,74 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 +bootargs=root=/dev/ubiblock0_2p1
-+bootconf=config-mt7986a-bananapi-bpi-r3-snand
++bootconf=config-mt7986a-bananapi-bpi-r3
++bootconf_base=config-mt7986a-bananapi-bpi-r3
++bootconf_nor=mt7986a-bananapi-bpi-r3-nor
++bootconf_nand=mt7986a-bananapi-bpi-r3-nand
++bootconf_sd=mt7986a-bananapi-bpi-r3-sd
++bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 +bootdelay=0
 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
@@ -1296,7 +1311,7 @@
 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
-+boot_update_conf=if mmc partconf 0 ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-snand ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-snand ; fi
++boot_update_conf=if mmc partconf 0 ; then setenv bootconf $bootconf_base#$bootconf_nand#$bootconf_emmc ; else setenv bootconf  $bootconf_base#$bootconf_nand#$bootconf_sd ; fi
 +part_default=production
 +part_recovery=recovery
 +reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
@@ -1326,14 +1341,19 @@
 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
 --- /dev/null
 +++ b/bananapi_bpi-r3_emmc_env
-@@ -0,0 +1,56 @@
+@@ -0,0 +1,61 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 +bootargs=root=/dev/mmcblk0p65
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
-+bootconf=config-mt7986a-bananapi-bpi-r3-emmc
++bootconf=config-mt7986a-bananapi-bpi-r3
++bootconf_base=config-mt7986a-bananapi-bpi-r3
++bootconf_nor=mt7986a-bananapi-bpi-r3-nor
++bootconf_nand=mt7986a-bananapi-bpi-r3-nand
++bootconf_sd=mt7986a-bananapi-bpi-r3-sd
++bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 +bootdelay=0
 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-emmc-preloader.bin
@@ -1367,7 +1387,7 @@
 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
-+boot_update_conf=if nand info ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-snand ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-nor ; fi
++boot_update_conf=if nand info ; then setenv bootconf $bootconf_base#$bootconf_emmc#$bootconf_nand ; else setenv bootconf $bootconf_base#$bootconf_emmc#$bootconf_nor ; fi
 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
 +mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
 +part_default=production

package/boot/uboot-mediatek/patches/433-add-qihoo_360t7.patch

@@ -0,0 +1,420 @@
+--- /dev/null
++++ b/configs/mt7981_qihoo-360t7_defconfig
+@@ -0,0 +1,175 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7981=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981_qihoo-360t7"
++CONFIG_DEFAULT_ENV_FILE="qihoo-360t7_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981_qihoo-360t7.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7981_qihoo-360t7.dts
+@@ -0,0 +1,180 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Qihoo 360T7";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		factory {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		wps {
++			label = "wps";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		status_red {
++			label = "red:status";
++			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
++		};
++
++		status_green {
++			label = "green:status";
++			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "disabled";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "sgmii";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <1000>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_1";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	pwm_pins: pwm0-pins-func-1 {
++		mux {
++			function = "pwm";
++			groups = "pwm0_1", "pwm1_0";
++		};
++	};
++};
++
++&pwm {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm_pins>;
++	status = "okay";
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "orig-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x6c00000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/qihoo-360t7_env
+@@ -0,0 +1,56 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-qihoo_360t7-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-qihoo_360t7-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-qihoo_360t7-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-qihoo_360t7-squashfs-sysupgrade.itb
++bootled_pwr=green:status
++bootled_rec=red:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-rockchip/Makefile

@@ -45,6 +45,20 @@ define U-Boot/nanopi-r2s-rk3328
     friendlyarm_nanopi-r2s
 endef
 
+define U-Boot/orangepi-r1-plus-rk3328
+  $(U-Boot/rk3328/Default)
+  NAME:=Orange Pi R1 Plus
+  BUILD_DEVICES:= \
+    xunlong_orangepi-r1-plus
+endef
+
+define U-Boot/orangepi-r1-plus-lts-rk3328
+  $(U-Boot/rk3328/Default)
+  NAME:=Orange Pi R1 Plus LTS
+  BUILD_DEVICES:= \
+    xunlong_orangepi-r1-plus-lts
+endef
+
 define U-Boot/roc-cc-rk3328
   $(U-Boot/rk3328/Default)
   NAME:=ROC-RK3328-CC
@@ -87,6 +101,8 @@ UBOOT_TARGETS := \
   rockpro64-rk3399 \
   nanopi-r2c-rk3328 \
   nanopi-r2s-rk3328 \
+  orangepi-r1-plus-rk3328 \
+  orangepi-r1-plus-lts-rk3328 \
   roc-cc-rk3328
 
 UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes

package/boot/uboot-rockchip/patches/103-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus.patch

@@ -0,0 +1,564 @@
+From ff312af37d5f263f181468639aab83f645d331f1 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 20 May 2023 18:50:38 +0800
+Subject: [PATCH] rockchip: rk3328: Add support for Orange Pi R1 Plus
+
+Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.
+
+This device is similar to the NanoPi R2S, and has a 16MB
+SPI NOR (mx25l12805d). The reset button is changed to
+directly reset the power supply, another detail is that
+both network ports have independent MAC addresses.
+
+The device tree and description are taken from kernel v6.3-rc1.
+
+Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+---
+ arch/arm/dts/Makefile                         |   1 +
+ .../dts/rk3328-orangepi-r1-plus-u-boot.dtsi   |  46 +++
+ arch/arm/dts/rk3328-orangepi-r1-plus.dts      | 373 ++++++++++++++++++
+ board/rockchip/evb_rk3328/MAINTAINERS         |   6 +
+ configs/orangepi-r1-plus-rk3328_defconfig     | 114 ++++++
+ 5 files changed, 540 insertions(+)
+ create mode 100644 arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
+ create mode 100644 arch/arm/dts/rk3328-orangepi-r1-plus.dts
+ create mode 100644 configs/orangepi-r1-plus-rk3328_defconfig
+
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -110,6 +110,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3328) += \
+ 	rk3328-evb.dtb \
+ 	rk3328-nanopi-r2c.dtb \
+ 	rk3328-nanopi-r2s.dtb \
++	rk3328-orangepi-r1-plus.dtb \
+ 	rk3328-roc-cc.dtb \
+ 	rk3328-rock64.dtb \
+ 	rk3328-rock-pi-e.dtb
+--- /dev/null
++++ b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
+@@ -0,0 +1,46 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++/*
++ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
++ * (C) Copyright 2020 David Bauer
++ */
++
++#include "rk3328-u-boot.dtsi"
++#include "rk3328-sdram-ddr4-666.dtsi"
++/ {
++	chosen {
++		u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
++	};
++};
++
++&gpio0 {
++	u-boot,dm-spl;
++};
++
++&pinctrl {
++	u-boot,dm-spl;
++};
++
++&sdmmc0m1_gpio {
++	u-boot,dm-spl;
++};
++
++&pcfg_pull_up_4ma {
++	u-boot,dm-spl;
++};
++
++/* Need this and all the pinctrl/gpio stuff above to set pinmux */
++&vcc_sd {
++	u-boot,dm-spl;
++};
++
++&gmac2io {
++	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++	snps,reset-active-low;
++	snps,reset-delays-us = <0 10000 50000>;
++};
++
++&spi0 {
++	spi_flash: spiflash@0 {
++		u-boot,dm-pre-reloc;
++	};
++};
+--- /dev/null
++++ b/arch/arm/dts/rk3328-orangepi-r1-plus.dts
+@@ -0,0 +1,359 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Based on rk3328-nanopi-r2s.dts, which is:
++ *   Copyright (c) 2020 David Bauer <mail@david-bauer.net>
++ */
++
++/dts-v1/;
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++#include "rk3328.dtsi"
++
++/ {
++	model = "Xunlong Orange Pi R1 Plus";
++	compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
++
++	aliases {
++		mmc0 = &sdmmc;
++	};
++
++	chosen {
++		stdout-path = "serial2:1500000n8";
++	};
++
++	gmac_clk: gmac-clock {
++		compatible = "fixed-clock";
++		clock-frequency = <125000000>;
++		clock-output-names = "gmac_clkin";
++		#clock-cells = <0>;
++	};
++
++	leds {
++		compatible = "gpio-leds";
++		pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
++		pinctrl-names = "default";
++
++		led-0 {
++			function = LED_FUNCTION_LAN;
++			color = <LED_COLOR_ID_GREEN>;
++			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
++		};
++
++		led-1 {
++			function = LED_FUNCTION_STATUS;
++			color = <LED_COLOR_ID_RED>;
++			gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "heartbeat";
++		};
++
++		led-2 {
++			function = LED_FUNCTION_WAN;
++			color = <LED_COLOR_ID_GREEN>;
++			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
++		};
++	};
++
++	vcc_sd: sdmmc-regulator {
++		compatible = "regulator-fixed";
++		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
++		pinctrl-0 = <&sdmmc0m1_gpio>;
++		pinctrl-names = "default";
++		regulator-name = "vcc_sd";
++		regulator-boot-on;
++		vin-supply = <&vcc_io>;
++	};
++
++	vcc_sys: vcc-sys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_sys";
++		regulator-always-on;
++		regulator-boot-on;
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++	};
++
++	vdd_5v_lan: vdd-5v-lan-regulator {
++		compatible = "regulator-fixed";
++		enable-active-high;
++		gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
++		pinctrl-0 = <&lan_vdd_pin>;
++		pinctrl-names = "default";
++		regulator-name = "vdd_5v_lan";
++		regulator-always-on;
++		regulator-boot-on;
++		vin-supply = <&vcc_sys>;
++	};
++};
++
++&cpu0 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu1 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu2 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&cpu3 {
++	cpu-supply = <&vdd_arm>;
++};
++
++&display_subsystem {
++	status = "disabled";
++};
++
++&gmac2io {
++	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
++	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
++	clock_in_out = "input";
++	phy-handle = <&rtl8211e>;
++	phy-mode = "rgmii";
++	phy-supply = <&vcc_io>;
++	pinctrl-0 = <&rgmiim1_pins>;
++	pinctrl-names = "default";
++	snps,aal;
++	rx_delay = <0x18>;
++	tx_delay = <0x24>;
++	status = "okay";
++
++	mdio {
++		compatible = "snps,dwmac-mdio";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		rtl8211e: ethernet-phy@1 {
++			reg = <1>;
++			pinctrl-0 = <&eth_phy_reset_pin>;
++			pinctrl-names = "default";
++			reset-assert-us = <10000>;
++			reset-deassert-us = <50000>;
++			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&i2c1 {
++	status = "okay";
++
++	rk805: pmic@18 {
++		compatible = "rockchip,rk805";
++		reg = <0x18>;
++		interrupt-parent = <&gpio1>;
++		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <1>;
++		clock-output-names = "xin32k", "rk805-clkout2";
++		gpio-controller;
++		#gpio-cells = <2>;
++		pinctrl-0 = <&pmic_int_l>;
++		pinctrl-names = "default";
++		rockchip,system-power-controller;
++		wakeup-source;
++
++		vcc1-supply = <&vcc_sys>;
++		vcc2-supply = <&vcc_sys>;
++		vcc3-supply = <&vcc_sys>;
++		vcc4-supply = <&vcc_sys>;
++		vcc5-supply = <&vcc_io>;
++		vcc6-supply = <&vcc_sys>;
++
++		regulators {
++			vdd_log: DCDC_REG1 {
++				regulator-name = "vdd_log";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <712500>;
++				regulator-max-microvolt = <1450000>;
++				regulator-ramp-delay = <12500>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1000000>;
++				};
++			};
++
++			vdd_arm: DCDC_REG2 {
++				regulator-name = "vdd_arm";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <712500>;
++				regulator-max-microvolt = <1450000>;
++				regulator-ramp-delay = <12500>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <950000>;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-name = "vcc_ddr";
++				regulator-always-on;
++				regulator-boot-on;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vcc_io: DCDC_REG4 {
++				regulator-name = "vcc_io";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcc_18: LDO_REG1 {
++				regulator-name = "vcc_18";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcc18_emmc: LDO_REG2 {
++				regulator-name = "vcc18_emmc";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vdd_10: LDO_REG3 {
++				regulator-name = "vdd_10";
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1000000>;
++				regulator-max-microvolt = <1000000>;
++
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1000000>;
++				};
++			};
++		};
++	};
++};
++
++&io_domains {
++	pmuio-supply = <&vcc_io>;
++	vccio1-supply = <&vcc_io>;
++	vccio2-supply = <&vcc18_emmc>;
++	vccio3-supply = <&vcc_io>;
++	vccio4-supply = <&vcc_io>;
++	vccio5-supply = <&vcc_io>;
++	vccio6-supply = <&vcc_io>;
++	status = "okay";
++};
++
++&pinctrl {
++	gmac2io {
++		eth_phy_reset_pin: eth-phy-reset-pin {
++			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
++		};
++	};
++
++	leds {
++		lan_led_pin: lan-led-pin {
++			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		sys_led_pin: sys-led-pin {
++			rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		wan_led_pin: wan-led-pin {
++			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	lan {
++		lan_vdd_pin: lan-vdd-pin {
++			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pmic {
++		pmic_int_l: pmic-int-l {
++			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++};
++
++&pwm2 {
++	status = "okay";
++};
++
++&sdmmc {
++	bus-width = <4>;
++	cap-sd-highspeed;
++	disable-wp;
++	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
++	pinctrl-names = "default";
++	vmmc-supply = <&vcc_sd>;
++	status = "okay";
++};
++
++&spi0 {
++	status = "okay";
++
++	flash@0 {
++		compatible = "jedec,spi-nor";
++		reg = <0>;
++		spi-max-frequency = <50000000>;
++	};
++};
++
++&tsadc {
++	rockchip,hw-tshut-mode = <0>;
++	rockchip,hw-tshut-polarity = <0>;
++	status = "okay";
++};
++
++&u2phy {
++	status = "okay";
++};
++
++&u2phy_host {
++	status = "okay";
++};
++
++&u2phy_otg {
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++&usb20_otg {
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usb_host0_ehci {
++	status = "okay";
++};
++
++&usb_host0_ohci {
++	status = "okay";
++};
+--- a/board/rockchip/evb_rk3328/MAINTAINERS
++++ b/board/rockchip/evb_rk3328/MAINTAINERS
+@@ -18,6 +18,12 @@ F:      configs/nanopi-r2s-rk3328_defcon
+ F:      arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
+ F:      arch/arm/dts/rk3328-nanopi-r2s.dts
+ 
++ORANGEPI-R1-PLUS-RK3328
++M:      Tianling Shen <cnsztl@gmail.com>
++S:      Maintained
++F:      configs/orangepi-r1-plus-rk3328_defconfig
++F:      arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
++
+ ROC-RK3328-CC
+ M:      Loic Devulder <ldevulder@suse.com>
+ M:      Chen-Yu Tsai <wens@csie.org>
+--- /dev/null
++++ b/configs/orangepi-r1-plus-rk3328_defconfig
+@@ -0,0 +1,98 @@
++CONFIG_ARM=y
++CONFIG_ARCH_ROCKCHIP=y
++CONFIG_SYS_TEXT_BASE=0x00200000
++CONFIG_SPL_GPIO_SUPPORT=y
++CONFIG_ENV_OFFSET=0x3F8000
++CONFIG_ROCKCHIP_RK3328=y
++CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
++CONFIG_TPL_LIBCOMMON_SUPPORT=y
++CONFIG_TPL_LIBGENERIC_SUPPORT=y
++CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
++CONFIG_SPL_STACK_R_ADDR=0x600000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEBUG_UART_BASE=0xFF130000
++CONFIG_DEBUG_UART_CLOCK=24000000
++CONFIG_SYSINFO=y
++CONFIG_DEBUG_UART=y
++CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
++# CONFIG_ANDROID_BOOT_IMAGE is not set
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_SPL_LOAD_FIT=y
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-orangepi-r1-plus.dtb"
++CONFIG_MISC_INIT_R=y
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_DISPLAY_BOARDINFO_LATE=y
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++CONFIG_TPL_SYS_MALLOC_SIMPLE=y
++CONFIG_SPL_STACK_R=y
++CONFIG_SPL_I2C_SUPPORT=y
++CONFIG_SPL_POWER_SUPPORT=y
++CONFIG_SPL_ATF=y
++CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
++CONFIG_CMD_BOOTZ=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_TIME=y
++CONFIG_SPL_OF_CONTROL=y
++CONFIG_TPL_OF_CONTROL=y
++CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus"
++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
++CONFIG_TPL_OF_PLATDATA=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_TPL_DM=y
++CONFIG_REGMAP=y
++CONFIG_SPL_REGMAP=y
++CONFIG_TPL_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_SPL_SYSCON=y
++CONFIG_TPL_SYSCON=y
++CONFIG_CLK=y
++CONFIG_SPL_CLK=y
++CONFIG_FASTBOOT_BUF_ADDR=0x800800
++CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
++CONFIG_ROCKCHIP_GPIO=y
++CONFIG_SYS_I2C_ROCKCHIP=y
++CONFIG_MMC_DW=y
++CONFIG_MMC_DW_ROCKCHIP=y
++CONFIG_SF_DEFAULT_SPEED=20000000
++CONFIG_DM_ETH=y
++CONFIG_ETH_DESIGNWARE=y
++CONFIG_GMAC_ROCKCHIP=y
++CONFIG_PINCTRL=y
++CONFIG_SPL_PINCTRL=y
++CONFIG_DM_PMIC=y
++CONFIG_PMIC_RK8XX=y
++CONFIG_SPL_DM_REGULATOR=y
++CONFIG_REGULATOR_PWM=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_SPL_DM_REGULATOR_FIXED=y
++CONFIG_REGULATOR_RK8XX=y
++CONFIG_PWM_ROCKCHIP=y
++CONFIG_RAM=y
++CONFIG_SPL_RAM=y
++CONFIG_TPL_RAM=y
++CONFIG_DM_RESET=y
++CONFIG_BAUDRATE=1500000
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_SYSRESET=y
++# CONFIG_TPL_SYSRESET is not set
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_DWC3=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_GENERIC=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_GENERIC=y
++CONFIG_USB_DWC2=y
++CONFIG_USB_DWC3=y
++# CONFIG_USB_DWC3_GADGET is not set
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_DWC2_OTG=y
++CONFIG_SPL_TINY_MEMSET=y
++CONFIG_TPL_TINY_MEMSET=y
++CONFIG_ERRNO_STR=y

package/boot/uboot-rockchip/patches/104-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus-LT.patch

@@ -0,0 +1,242 @@
+From 7a9326a96098bc63d2b60538f657c3a533415276 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 20 May 2023 18:52:14 +0800
+Subject: [PATCH] rockchip: rk3328: Add support for Orange Pi R1 Plus LTS
+
+The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
+the on-board NIC chip changed from rtl8211e to yt8531c, and RAM type
+changed from DDR4 to LPDDR3.
+
+The device tree is taken from kernel v6.4-rc1.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+
+---
+ arch/arm/dts/Makefile                         |   1 +
+ .../rk3328-orangepi-r1-plus-lts-u-boot.dtsi   |  46 +++++++
+ arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts  |  40 ++++++
+ board/rockchip/evb_rk3328/MAINTAINERS         |   6 +
+ configs/orangepi-r1-plus-lts-rk3328_defconfig | 114 ++++++++++++++++++
+ 5 files changed, 207 insertions(+)
+ create mode 100644 arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi
+ create mode 100644 arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts
+ create mode 100644 configs/orangepi-r1-plus-lts-rk3328_defconfig
+
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -111,6 +111,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3328) += \
+ 	rk3328-nanopi-r2c.dtb \
+ 	rk3328-nanopi-r2s.dtb \
+ 	rk3328-orangepi-r1-plus.dtb \
++	rk3328-orangepi-r1-plus-lts.dtb \
+ 	rk3328-roc-cc.dtb \
+ 	rk3328-rock64.dtb \
+ 	rk3328-rock-pi-e.dtb
+--- /dev/null
++++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi
+@@ -0,0 +1,46 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++/*
++ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
++ * (C) Copyright 2020 David Bauer
++ */
++
++#include "rk3328-u-boot.dtsi"
++#include "rk3328-sdram-lpddr3-666.dtsi"
++/ {
++	chosen {
++		u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
++	};
++};
++
++&gpio0 {
++	u-boot,dm-spl;
++};
++
++&pinctrl {
++	u-boot,dm-spl;
++};
++
++&sdmmc0m1_gpio {
++	u-boot,dm-spl;
++};
++
++&pcfg_pull_up_4ma {
++	u-boot,dm-spl;
++};
++
++/* Need this and all the pinctrl/gpio stuff above to set pinmux */
++&vcc_sd {
++	u-boot,dm-spl;
++};
++
++&gmac2io {
++	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++	snps,reset-active-low;
++	snps,reset-delays-us = <0 10000 50000>;
++};
++
++&spi0 {
++	spi_flash: spiflash@0 {
++		u-boot,dm-pre-reloc;
++	};
++};
+--- /dev/null
++++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts
+@@ -0,0 +1,40 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2016 Xunlong Software. Co., Ltd.
++ * (http://www.orangepi.org)
++ *
++ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
++ */
++
++/dts-v1/;
++#include "rk3328-orangepi-r1-plus.dts"
++
++/ {
++	model = "Xunlong Orange Pi R1 Plus LTS";
++	compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
++};
++
++&gmac2io {
++	phy-handle = <&yt8531c>;
++	tx_delay = <0x19>;
++	rx_delay = <0x05>;
++
++	mdio {
++		/delete-node/ ethernet-phy@1;
++
++		yt8531c: ethernet-phy@0 {
++			compatible = "ethernet-phy-ieee802.3-c22";
++			reg = <0>;
++
++			motorcomm,clk-out-frequency-hz = <125000000>;
++			motorcomm,keep-pll-enabled;
++			motorcomm,auto-sleep-disabled;
++
++			pinctrl-0 = <&eth_phy_reset_pin>;
++			pinctrl-names = "default";
++			reset-assert-us = <15000>;
++			reset-deassert-us = <50000>;
++			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
+--- a/board/rockchip/evb_rk3328/MAINTAINERS
++++ b/board/rockchip/evb_rk3328/MAINTAINERS
+@@ -24,6 +24,12 @@ S:      Maintained
+ F:      configs/orangepi-r1-plus-rk3328_defconfig
+ F:      arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
+ 
++ORANGEPI-R1-PLUS-LTS-RK3328
++M:      Tianling Shen <cnsztl@gmail.com>
++S:      Maintained
++F:      configs/orangepi-r1-plus-lts-rk3328_defconfig
++F:      arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi
++
+ ROC-RK3328-CC
+ M:      Loic Devulder <ldevulder@suse.com>
+ M:      Chen-Yu Tsai <wens@csie.org>
+--- /dev/null
++++ b/configs/orangepi-r1-plus-lts-rk3328_defconfig
+@@ -0,0 +1,98 @@
++CONFIG_ARM=y
++CONFIG_ARCH_ROCKCHIP=y
++CONFIG_SYS_TEXT_BASE=0x00200000
++CONFIG_SPL_GPIO_SUPPORT=y
++CONFIG_ENV_OFFSET=0x3F8000
++CONFIG_ROCKCHIP_RK3328=y
++CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
++CONFIG_TPL_LIBCOMMON_SUPPORT=y
++CONFIG_TPL_LIBGENERIC_SUPPORT=y
++CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
++CONFIG_SPL_STACK_R_ADDR=0x600000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEBUG_UART_BASE=0xFF130000
++CONFIG_DEBUG_UART_CLOCK=24000000
++CONFIG_SYSINFO=y
++CONFIG_DEBUG_UART=y
++CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
++# CONFIG_ANDROID_BOOT_IMAGE is not set
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_SPL_LOAD_FIT=y
++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-orangepi-r1-plus-lts.dtb"
++CONFIG_MISC_INIT_R=y
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_DISPLAY_BOARDINFO_LATE=y
++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
++CONFIG_TPL_SYS_MALLOC_SIMPLE=y
++CONFIG_SPL_STACK_R=y
++CONFIG_SPL_I2C_SUPPORT=y
++CONFIG_SPL_POWER_SUPPORT=y
++CONFIG_SPL_ATF=y
++CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
++CONFIG_CMD_BOOTZ=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_TIME=y
++CONFIG_SPL_OF_CONTROL=y
++CONFIG_TPL_OF_CONTROL=y
++CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus-lts"
++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
++CONFIG_TPL_OF_PLATDATA=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_TPL_DM=y
++CONFIG_REGMAP=y
++CONFIG_SPL_REGMAP=y
++CONFIG_TPL_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_SPL_SYSCON=y
++CONFIG_TPL_SYSCON=y
++CONFIG_CLK=y
++CONFIG_SPL_CLK=y
++CONFIG_FASTBOOT_BUF_ADDR=0x800800
++CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
++CONFIG_ROCKCHIP_GPIO=y
++CONFIG_SYS_I2C_ROCKCHIP=y
++CONFIG_MMC_DW=y
++CONFIG_MMC_DW_ROCKCHIP=y
++CONFIG_SF_DEFAULT_SPEED=20000000
++CONFIG_DM_ETH=y
++CONFIG_ETH_DESIGNWARE=y
++CONFIG_GMAC_ROCKCHIP=y
++CONFIG_PINCTRL=y
++CONFIG_SPL_PINCTRL=y
++CONFIG_DM_PMIC=y
++CONFIG_PMIC_RK8XX=y
++CONFIG_SPL_DM_REGULATOR=y
++CONFIG_REGULATOR_PWM=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_SPL_DM_REGULATOR_FIXED=y
++CONFIG_REGULATOR_RK8XX=y
++CONFIG_PWM_ROCKCHIP=y
++CONFIG_RAM=y
++CONFIG_SPL_RAM=y
++CONFIG_TPL_RAM=y
++CONFIG_DM_RESET=y
++CONFIG_BAUDRATE=1500000
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_SYSRESET=y
++# CONFIG_TPL_SYSRESET is not set
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_DWC3=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_GENERIC=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_GENERIC=y
++CONFIG_USB_DWC2=y
++CONFIG_USB_DWC3=y
++# CONFIG_USB_DWC3_GADGET is not set
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_DWC2_OTG=y
++CONFIG_SPL_TINY_MEMSET=y
++CONFIG_TPL_TINY_MEMSET=y
++CONFIG_ERRNO_STR=y

package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-lts-rk3328/dt-decl.h

@@ -0,0 +1,24 @@
+/*
+ * DO NOT MODIFY
+ *
+ * Declares externs for all device/uclass instances.
+ * This was generated by dtoc from a .dtb (device tree binary) file.
+ */
+
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+
+/* driver declarations - these allow DM_DRIVER_GET() to be used */
+extern U_BOOT_DRIVER(rockchip_rk3328_cru);
+extern U_BOOT_DRIVER(rockchip_rk3328_dmc);
+extern U_BOOT_DRIVER(rockchip_rk3288_dw_mshc);
+extern U_BOOT_DRIVER(ns16550_serial);
+extern U_BOOT_DRIVER(rockchip_rk3328_spi);
+extern U_BOOT_DRIVER(rockchip_rk3328_grf);
+
+/* uclass driver declarations - needed for DM_UCLASS_DRIVER_REF() */
+extern UCLASS_DRIVER(clk);
+extern UCLASS_DRIVER(mmc);
+extern UCLASS_DRIVER(ram);
+extern UCLASS_DRIVER(serial);
+extern UCLASS_DRIVER(syscon);

package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-lts-rk3328/dt-plat.c

@@ -0,0 +1,170 @@
+/*
+ * DO NOT MODIFY
+ *
+ * Declares the U_BOOT_DRIVER() records and platform data.
+ * This was generated by dtoc from a .dtb (device tree binary) file.
+ */
+
+/* Allow use of U_BOOT_DRVINFO() in this file */
+#define DT_PLAT_C
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+
+/*
+ * driver_info declarations, ordered by 'struct driver_info' linker_list idx:
+ *
+ * idx  driver_info          driver
+ * ---  -------------------- --------------------
+ *   0: clock_controller_at_ff440000 rockchip_rk3328_cru
+ *   1: dmc                  rockchip_rk3328_dmc
+ *   2: mmc_at_ff500000      rockchip_rk3288_dw_mshc
+ *   3: serial_at_ff130000   ns16550_serial
+ *   4: spi_at_ff190000      rockchip_rk3328_spi
+ *   5: syscon_at_ff100000   rockchip_rk3328_grf
+ * ---  -------------------- --------------------
+ */
+
+/*
+ * Node /clock-controller@ff440000 index 0
+ * driver rockchip_rk3328_cru parent None
+ */
+static struct dtd_rockchip_rk3328_cru dtv_clock_controller_at_ff440000 = {
+	.reg			= {0xff440000, 0x1000},
+	.rockchip_grf		= 0x38,
+};
+U_BOOT_DRVINFO(clock_controller_at_ff440000) = {
+	.name		= "rockchip_rk3328_cru",
+	.plat		= &dtv_clock_controller_at_ff440000,
+	.plat_size	= sizeof(dtv_clock_controller_at_ff440000),
+	.parent_idx	= -1,
+};
+
+/*
+ * Node /dmc index 1
+ * driver rockchip_rk3328_dmc parent None
+ */
+static struct dtd_rockchip_rk3328_dmc dtv_dmc = {
+	.reg			= {0xff400000, 0x1000, 0xff780000, 0x3000, 0xff100000, 0x1000, 0xff440000, 0x1000,
+		0xff720000, 0x1000, 0xff798000, 0x1000},
+	.rockchip_sdram_params	= {0x1, 0xc, 0x3, 0x1, 0x0, 0x0, 0x10, 0x10,
+		0x10, 0x10, 0x0, 0x8c48a18a, 0x0, 0x21, 0x482, 0x15,
+		0x21a, 0xff, 0x14d, 0x6, 0x1, 0x0, 0x0, 0x0,
+		0x43041008, 0x64, 0x140023, 0xd0, 0x220002, 0xd4, 0x10000, 0xd8,
+		0x703, 0xdc, 0x830004, 0xe0, 0x10000, 0xe4, 0x70003, 0xf4,
+		0xf011f, 0x100, 0x6090b07, 0x104, 0x2020b, 0x108, 0x2030506, 0x10c,
+		0x505000, 0x110, 0x3020204, 0x114, 0x1010303, 0x118, 0x2020003, 0x120,
+		0x303, 0x138, 0x25, 0x180, 0x3c000f, 0x184, 0x900000, 0x190,
+		0x7020000, 0x198, 0x5001100, 0x1a0, 0xc0400003, 0x240, 0x900090c, 0x244,
+		0x101, 0x250, 0xf00, 0x490, 0x1, 0xffffffff, 0xffffffff, 0xffffffff,
+		0xffffffff, 0xffffffff, 0xffffffff, 0x4, 0xb, 0x28, 0x6, 0x2c,
+		0x0, 0x30, 0x3, 0xffffffff, 0xffffffff, 0x77, 0x88, 0x79,
+		0x79, 0x87, 0x97, 0x87, 0x78, 0x77, 0x78, 0x87,
+		0x88, 0x87, 0x87, 0x77, 0x78, 0x78, 0x78, 0x78,
+		0x78, 0x78, 0x78, 0x78, 0x78, 0x69, 0x9, 0x77,
+		0x78, 0x77, 0x78, 0x77, 0x78, 0x77, 0x78, 0x77,
+		0x79, 0x9, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78,
+		0x78, 0x78, 0x78, 0x69, 0x9, 0x77, 0x78, 0x77,
+		0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x79, 0x9,
+		0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78,
+		0x78, 0x69, 0x9, 0x77, 0x78, 0x77, 0x78, 0x77,
+		0x78, 0x77, 0x78, 0x77, 0x79, 0x9, 0x78, 0x78,
+		0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x69,
+		0x9, 0x77, 0x78, 0x77, 0x77, 0x77, 0x77, 0x77,
+		0x77, 0x77, 0x79, 0x9},
+};
+U_BOOT_DRVINFO(dmc) = {
+	.name		= "rockchip_rk3328_dmc",
+	.plat		= &dtv_dmc,
+	.plat_size	= sizeof(dtv_dmc),
+	.parent_idx	= -1,
+};
+
+/*
+ * Node /mmc@ff500000 index 2
+ * driver rockchip_rk3288_dw_mshc parent None
+ */
+static struct dtd_rockchip_rk3288_dw_mshc dtv_mmc_at_ff500000 = {
+	.bus_width		= 0x4,
+	.cap_sd_highspeed	= true,
+	.clocks			= {
+			{0, {317}},
+			{0, {33}},
+			{0, {74}},
+			{0, {78}},},
+	.disable_wp		= true,
+	.fifo_depth		= 0x100,
+	.interrupts		= {0x0, 0xc, 0x4},
+	.max_frequency		= 0x8f0d180,
+	.pinctrl_0		= {0x45, 0x46, 0x47, 0x48},
+	.pinctrl_names		= "default",
+	.reg			= {0xff500000, 0x4000},
+	.u_boot_spl_fifo_mode	= true,
+	.vmmc_supply		= 0x49,
+};
+U_BOOT_DRVINFO(mmc_at_ff500000) = {
+	.name		= "rockchip_rk3288_dw_mshc",
+	.plat		= &dtv_mmc_at_ff500000,
+	.plat_size	= sizeof(dtv_mmc_at_ff500000),
+	.parent_idx	= -1,
+};
+
+/*
+ * Node /serial@ff130000 index 3
+ * driver ns16550_serial parent None
+ */
+static struct dtd_ns16550_serial dtv_serial_at_ff130000 = {
+	.clock_frequency	= 0x16e3600,
+	.clocks			= {
+			{0, {40}},
+			{0, {212}},},
+	.dma_names		= {"tx", "rx"},
+	.dmas			= {0x10, 0x6, 0x10, 0x7},
+	.interrupts		= {0x0, 0x39, 0x4},
+	.pinctrl_0		= 0x24,
+	.pinctrl_names		= "default",
+	.reg			= {0xff130000, 0x100},
+	.reg_io_width		= 0x4,
+	.reg_shift		= 0x2,
+};
+U_BOOT_DRVINFO(serial_at_ff130000) = {
+	.name		= "ns16550_serial",
+	.plat		= &dtv_serial_at_ff130000,
+	.plat_size	= sizeof(dtv_serial_at_ff130000),
+	.parent_idx	= -1,
+};
+
+/* Node /spi@ff190000 index 4 */
+static struct dtd_rockchip_rk3328_spi dtv_spi_at_ff190000 = {
+	.clocks			= {
+			{0, {32}},
+			{0, {209}},},
+	.dma_names		= {"tx", "rx"},
+	.dmas			= {0x10, 0x8, 0x10, 0x9},
+	.interrupts		= {0x0, 0x31, 0x4},
+	.pinctrl_0		= {0x2c, 0x2d, 0x2e, 0x2f},
+	.pinctrl_names		= "default",
+	.reg			= {0xff190000, 0x1000},
+};
+U_BOOT_DRVINFO(spi_at_ff190000) = {
+	.name		= "rockchip_rk3328_spi",
+	.plat		= &dtv_spi_at_ff190000,
+	.plat_size	= sizeof(dtv_spi_at_ff190000),
+	.parent_idx	= -1,
+};
+
+/*
+ * Node /syscon@ff100000 index 5
+ * driver rockchip_rk3328_grf parent None
+ */
+static struct dtd_rockchip_rk3328_grf dtv_syscon_at_ff100000 = {
+	.reg			= {0xff100000, 0x1000},
+};
+U_BOOT_DRVINFO(syscon_at_ff100000) = {
+	.name		= "rockchip_rk3328_grf",
+	.plat		= &dtv_syscon_at_ff100000,
+	.plat_size	= sizeof(dtv_syscon_at_ff100000),
+	.parent_idx	= -1,
+};
+

package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-lts-rk3328/dt-structs-gen.h

@@ -0,0 +1,55 @@
+/*
+ * DO NOT MODIFY
+ *
+ * Defines the structs used to hold devicetree data.
+ * This was generated by dtoc from a .dtb (device tree binary) file.
+ */
+
+#include <stdbool.h>
+#include <linux/libfdt.h>
+struct dtd_ns16550_serial {
+	fdt32_t		clock_frequency;
+	struct phandle_1_arg clocks[2];
+	const char *	dma_names[2];
+	fdt32_t		dmas[4];
+	fdt32_t		interrupts[3];
+	fdt32_t		pinctrl_0;
+	const char *	pinctrl_names;
+	fdt64_t		reg[2];
+	fdt32_t		reg_io_width;
+	fdt32_t		reg_shift;
+};
+struct dtd_rockchip_rk3288_dw_mshc {
+	fdt32_t		bus_width;
+	bool		cap_sd_highspeed;
+	struct phandle_1_arg clocks[4];
+	bool		disable_wp;
+	fdt32_t		fifo_depth;
+	fdt32_t		interrupts[3];
+	fdt32_t		max_frequency;
+	fdt32_t		pinctrl_0[4];
+	const char *	pinctrl_names;
+	fdt64_t		reg[2];
+	bool		u_boot_spl_fifo_mode;
+	fdt32_t		vmmc_supply;
+};
+struct dtd_rockchip_rk3328_cru {
+	fdt64_t		reg[2];
+	fdt32_t		rockchip_grf;
+};
+struct dtd_rockchip_rk3328_dmc {
+	fdt64_t		reg[12];
+	fdt32_t		rockchip_sdram_params[196];
+};
+struct dtd_rockchip_rk3328_grf {
+	fdt64_t		reg[2];
+};
+struct dtd_rockchip_rk3328_spi {
+	struct phandle_1_arg clocks[2];
+	const char *	dma_names[2];
+	fdt32_t		dmas[4];
+	fdt32_t		interrupts[3];
+	fdt32_t		pinctrl_0[4];
+	const char *	pinctrl_names;
+	fdt64_t		reg[2];
+};

package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-decl.h

@@ -0,0 +1,24 @@
+/*
+ * DO NOT MODIFY
+ *
+ * Declares externs for all device/uclass instances.
+ * This was generated by dtoc from a .dtb (device tree binary) file.
+ */
+
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+
+/* driver declarations - these allow DM_DRIVER_GET() to be used */
+extern U_BOOT_DRIVER(rockchip_rk3328_cru);
+extern U_BOOT_DRIVER(rockchip_rk3328_dmc);
+extern U_BOOT_DRIVER(rockchip_rk3288_dw_mshc);
+extern U_BOOT_DRIVER(ns16550_serial);
+extern U_BOOT_DRIVER(rockchip_rk3328_spi);
+extern U_BOOT_DRIVER(rockchip_rk3328_grf);
+
+/* uclass driver declarations - needed for DM_UCLASS_DRIVER_REF() */
+extern UCLASS_DRIVER(clk);
+extern UCLASS_DRIVER(mmc);
+extern UCLASS_DRIVER(ram);
+extern UCLASS_DRIVER(serial);
+extern UCLASS_DRIVER(syscon);

package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-plat.c

@@ -0,0 +1,170 @@
+/*
+ * DO NOT MODIFY
+ *
+ * Declares the U_BOOT_DRIVER() records and platform data.
+ * This was generated by dtoc from a .dtb (device tree binary) file.
+ */
+
+/* Allow use of U_BOOT_DRVINFO() in this file */
+#define DT_PLAT_C
+
+#include <common.h>
+#include <dm.h>
+#include <dt-structs.h>
+
+/*
+ * driver_info declarations, ordered by 'struct driver_info' linker_list idx:
+ *
+ * idx  driver_info          driver
+ * ---  -------------------- --------------------
+ *   0: clock_controller_at_ff440000 rockchip_rk3328_cru
+ *   1: dmc                  rockchip_rk3328_dmc
+ *   2: mmc_at_ff500000      rockchip_rk3288_dw_mshc
+ *   3: serial_at_ff130000   ns16550_serial
+ *   4: spi_at_ff190000      rockchip_rk3328_spi
+ *   5: syscon_at_ff100000   rockchip_rk3328_grf
+ * ---  -------------------- --------------------
+ */
+
+/*
+ * Node /clock-controller@ff440000 index 0
+ * driver rockchip_rk3328_cru parent None
+ */
+static struct dtd_rockchip_rk3328_cru dtv_clock_controller_at_ff440000 = {
+	.reg			= {0xff440000, 0x1000},
+	.rockchip_grf		= 0x38,
+};
+U_BOOT_DRVINFO(clock_controller_at_ff440000) = {
+	.name		= "rockchip_rk3328_cru",
+	.plat		= &dtv_clock_controller_at_ff440000,
+	.plat_size	= sizeof(dtv_clock_controller_at_ff440000),
+	.parent_idx	= -1,
+};
+
+/*
+ * Node /dmc index 1
+ * driver rockchip_rk3328_dmc parent None
+ */
+static struct dtd_rockchip_rk3328_dmc dtv_dmc = {
+	.reg			= {0xff400000, 0x1000, 0xff780000, 0x3000, 0xff100000, 0x1000, 0xff440000, 0x1000,
+		0xff720000, 0x1000, 0xff798000, 0x1000},
+	.rockchip_sdram_params	= {0x1, 0xa, 0x2, 0x1, 0x0, 0x0, 0x11, 0x0,
+		0x11, 0x0, 0x0, 0x94291288, 0x0, 0x27, 0x462, 0x15,
+		0x242, 0xff, 0x14d, 0x0, 0x1, 0x0, 0x0, 0x0,
+		0x43049010, 0x64, 0x28003b, 0xd0, 0x20053, 0xd4, 0x220000, 0xd8,
+		0x100, 0xdc, 0x40000, 0xe0, 0x0, 0xe4, 0x110000, 0xe8,
+		0x420, 0xec, 0x400, 0xf4, 0xf011f, 0x100, 0x9060b06, 0x104,
+		0x20209, 0x108, 0x505040a, 0x10c, 0x40400c, 0x110, 0x5030206, 0x114,
+		0x3030202, 0x120, 0x3030b03, 0x124, 0x20208, 0x180, 0x1000040, 0x184,
+		0x0, 0x190, 0x7030003, 0x198, 0x5001100, 0x1a0, 0xc0400003, 0x240,
+		0x6000604, 0x244, 0x201, 0x250, 0xf00, 0x490, 0x1, 0xffffffff,
+		0xffffffff, 0xffffffff, 0xffffffff, 0x4, 0xc, 0x28, 0xa, 0x2c,
+		0x0, 0x30, 0x9, 0xffffffff, 0xffffffff, 0x77, 0x88, 0x79,
+		0x79, 0x87, 0x97, 0x87, 0x78, 0x77, 0x78, 0x87,
+		0x88, 0x87, 0x87, 0x77, 0x78, 0x78, 0x78, 0x78,
+		0x78, 0x78, 0x78, 0x78, 0x78, 0x69, 0x9, 0x77,
+		0x78, 0x77, 0x78, 0x77, 0x78, 0x77, 0x78, 0x77,
+		0x79, 0x9, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78,
+		0x78, 0x78, 0x78, 0x69, 0x9, 0x77, 0x78, 0x77,
+		0x77, 0x77, 0x77, 0x77, 0x77, 0x77, 0x79, 0x9,
+		0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78,
+		0x78, 0x69, 0x9, 0x77, 0x78, 0x77, 0x78, 0x77,
+		0x78, 0x77, 0x78, 0x77, 0x79, 0x9, 0x78, 0x78,
+		0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x78, 0x69,
+		0x9, 0x77, 0x78, 0x77, 0x77, 0x77, 0x77, 0x77,
+		0x77, 0x77, 0x79, 0x9},
+};
+U_BOOT_DRVINFO(dmc) = {
+	.name		= "rockchip_rk3328_dmc",
+	.plat		= &dtv_dmc,
+	.plat_size	= sizeof(dtv_dmc),
+	.parent_idx	= -1,
+};
+
+/*
+ * Node /mmc@ff500000 index 2
+ * driver rockchip_rk3288_dw_mshc parent None
+ */
+static struct dtd_rockchip_rk3288_dw_mshc dtv_mmc_at_ff500000 = {
+	.bus_width		= 0x4,
+	.cap_sd_highspeed	= true,
+	.clocks			= {
+			{0, {317}},
+			{0, {33}},
+			{0, {74}},
+			{0, {78}},},
+	.disable_wp		= true,
+	.fifo_depth		= 0x100,
+	.interrupts		= {0x0, 0xc, 0x4},
+	.max_frequency		= 0x8f0d180,
+	.pinctrl_0		= {0x45, 0x46, 0x47, 0x48},
+	.pinctrl_names		= "default",
+	.reg			= {0xff500000, 0x4000},
+	.u_boot_spl_fifo_mode	= true,
+	.vmmc_supply		= 0x49,
+};
+U_BOOT_DRVINFO(mmc_at_ff500000) = {
+	.name		= "rockchip_rk3288_dw_mshc",
+	.plat		= &dtv_mmc_at_ff500000,
+	.plat_size	= sizeof(dtv_mmc_at_ff500000),
+	.parent_idx	= -1,
+};
+
+/*
+ * Node /serial@ff130000 index 3
+ * driver ns16550_serial parent None
+ */
+static struct dtd_ns16550_serial dtv_serial_at_ff130000 = {
+	.clock_frequency	= 0x16e3600,
+	.clocks			= {
+			{0, {40}},
+			{0, {212}},},
+	.dma_names		= {"tx", "rx"},
+	.dmas			= {0x10, 0x6, 0x10, 0x7},
+	.interrupts		= {0x0, 0x39, 0x4},
+	.pinctrl_0		= 0x24,
+	.pinctrl_names		= "default",
+	.reg			= {0xff130000, 0x100},
+	.reg_io_width		= 0x4,
+	.reg_shift		= 0x2,
+};
+U_BOOT_DRVINFO(serial_at_ff130000) = {
+	.name		= "ns16550_serial",
+	.plat		= &dtv_serial_at_ff130000,
+	.plat_size	= sizeof(dtv_serial_at_ff130000),
+	.parent_idx	= -1,
+};
+
+/* Node /spi@ff190000 index 4 */
+static struct dtd_rockchip_rk3328_spi dtv_spi_at_ff190000 = {
+	.clocks			= {
+			{0, {32}},
+			{0, {209}},},
+	.dma_names		= {"tx", "rx"},
+	.dmas			= {0x10, 0x8, 0x10, 0x9},
+	.interrupts		= {0x0, 0x31, 0x4},
+	.pinctrl_0		= {0x2c, 0x2d, 0x2e, 0x2f},
+	.pinctrl_names		= "default",
+	.reg			= {0xff190000, 0x1000},
+};
+U_BOOT_DRVINFO(spi_at_ff190000) = {
+	.name		= "rockchip_rk3328_spi",
+	.plat		= &dtv_spi_at_ff190000,
+	.plat_size	= sizeof(dtv_spi_at_ff190000),
+	.parent_idx	= -1,
+};
+
+/*
+ * Node /syscon@ff100000 index 5
+ * driver rockchip_rk3328_grf parent None
+ */
+static struct dtd_rockchip_rk3328_grf dtv_syscon_at_ff100000 = {
+	.reg			= {0xff100000, 0x1000},
+};
+U_BOOT_DRVINFO(syscon_at_ff100000) = {
+	.name		= "rockchip_rk3328_grf",
+	.plat		= &dtv_syscon_at_ff100000,
+	.plat_size	= sizeof(dtv_syscon_at_ff100000),
+	.parent_idx	= -1,
+};
+

package/boot/uboot-rockchip/src/of-platdata/orangepi-r1-plus-rk3328/dt-structs-gen.h

@@ -0,0 +1,55 @@
+/*
+ * DO NOT MODIFY
+ *
+ * Defines the structs used to hold devicetree data.
+ * This was generated by dtoc from a .dtb (device tree binary) file.
+ */
+
+#include <stdbool.h>
+#include <linux/libfdt.h>
+struct dtd_ns16550_serial {
+	fdt32_t		clock_frequency;
+	struct phandle_1_arg clocks[2];
+	const char *	dma_names[2];
+	fdt32_t		dmas[4];
+	fdt32_t		interrupts[3];
+	fdt32_t		pinctrl_0;
+	const char *	pinctrl_names;
+	fdt64_t		reg[2];
+	fdt32_t		reg_io_width;
+	fdt32_t		reg_shift;
+};
+struct dtd_rockchip_rk3288_dw_mshc {
+	fdt32_t		bus_width;
+	bool		cap_sd_highspeed;
+	struct phandle_1_arg clocks[4];
+	bool		disable_wp;
+	fdt32_t		fifo_depth;
+	fdt32_t		interrupts[3];
+	fdt32_t		max_frequency;
+	fdt32_t		pinctrl_0[4];
+	const char *	pinctrl_names;
+	fdt64_t		reg[2];
+	bool		u_boot_spl_fifo_mode;
+	fdt32_t		vmmc_supply;
+};
+struct dtd_rockchip_rk3328_cru {
+	fdt64_t		reg[2];
+	fdt32_t		rockchip_grf;
+};
+struct dtd_rockchip_rk3328_dmc {
+	fdt64_t		reg[12];
+	fdt32_t		rockchip_sdram_params[196];
+};
+struct dtd_rockchip_rk3328_grf {
+	fdt64_t		reg[2];
+};
+struct dtd_rockchip_rk3328_spi {
+	struct phandle_1_arg clocks[2];
+	const char *	dma_names[2];
+	fdt32_t		dmas[4];
+	fdt32_t		interrupts[3];
+	fdt32_t		pinctrl_0[4];
+	const char *	pinctrl_names;
+	fdt64_t		reg[2];
+};

package/boot/uboot-sifiveu/Makefile

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2022 OpenWrt.org
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=2022.10
+PKG_HASH:=50b4482a505bc281ba8470c399a3c26e145e29b23500bc35c50debd7fa46bdf8
+
+include $(INCLUDE_DIR)/u-boot.mk
+include $(INCLUDE_DIR)/package.mk
+
+define U-Boot/Default
+  BUILD_TARGET:=sifiveu
+  BUILD_DEVICES=$(1)
+  UBOOT_IMAGE:=u-boot.itb
+  DTS_DIR:=arch/riscv/dts
+  UENV:=default
+  DEFAULT:=y
+endef
+
+define U-Boot/sifive_unleashed
+  NAME:=SiFive Unleashed
+  OPENSBI:=generic
+  DEPENDS:=+opensbi_generic
+  UBOOT_DTS:=hifive-unleashed-a00.dtb
+  BUILD_DEVICES:=sifive_unleashed
+endef
+
+define U-Boot/sifive_unmatched
+  NAME:=SiFive Unmatched
+  OPENSBI:=generic
+  DEPENDS:=+opensbi_generic
+  UBOOT_DTS:=hifive-unmatched-a00.dtb
+  BUILD_DEVICES:=sifive_unmatched
+endef
+
+UBOOT_TARGETS := \
+	sifive_unleashed \
+	sifive_unmatched
+
+UBOOT_MAKE_FLAGS += \
+        OPENSBI=$(STAGING_DIR_IMAGE)/fw_dynamic-${OPENSBI}.bin
+
+define Build/Configure
+	$(call Build/Configure/U-Boot)
+	sed -i 's/CONFIG_TOOLS_LIBCRYPTO=y/# CONFIG_TOOLS_LIBCRYPTO is not set/' $(PKG_BUILD_DIR)/.config
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(UBOOT_IMAGE)
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/spl/u-boot-spl.bin $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(UBOOT_IMAGE)-spl
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(DTS_DIR)/$(UBOOT_DTS) $(STAGING_DIR_IMAGE)/$(UBOOT_DTS)
+
+	mkimage -C none -A arm -T script -d uEnv-$(UENV).txt \
+		$(STAGING_DIR_IMAGE)/$(BUILD_DEVICES)-boot.scr
+endef
+
+$(eval $(call BuildPackage/U-Boot))

package/boot/uboot-sifiveu/patches/0002-board-sifive-spl-Initialized-the-PWM-setting-in-the-.patch

@@ -0,0 +1,104 @@
+From 725595e667cc4423347c255da8ca4c5b3aa0980a Mon Sep 17 00:00:00 2001
+From: Vincent Chen <vincent.chen@sifive.com>
+Date: Mon, 15 Nov 2021 03:31:04 -0800
+Subject: [PATCH 2/8] board: sifive: spl: Initialized the PWM setting in the
+ SPL stage
+
+LEDs and multiple fans can be controlled by SPL. This patch ensures
+that all fans have been enabled in the SPL stage. In addition, the
+LED's color will be set to yellow.
+---
+ board/sifive/unmatched/Makefile |  1 +
+ board/sifive/unmatched/pwm.c    | 57 +++++++++++++++++++++++++++++++++
+ board/sifive/unmatched/spl.c    |  2 ++
+ 3 files changed, 60 insertions(+)
+ create mode 100644 board/sifive/unmatched/pwm.c
+
+diff --git a/board/sifive/unmatched/Makefile b/board/sifive/unmatched/Makefile
+index 1345330089..5df01982e9 100644
+--- a/board/sifive/unmatched/Makefile
++++ b/board/sifive/unmatched/Makefile
+@@ -9,3 +9,4 @@ obj-y += spl.o
+ else
+ obj-y += unmatched.o
+ endif
++obj-y += pwm.o
+diff --git a/board/sifive/unmatched/pwm.c b/board/sifive/unmatched/pwm.c
+new file mode 100644
+index 0000000000..e1cc02310a
+--- /dev/null
++++ b/board/sifive/unmatched/pwm.c
+@@ -0,0 +1,57 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * Copyright (c) 2021, SiFive Inc
++ *
++ * Authors:
++ *   Vincent Chen <vincent.chen@sifive.com>
++ *   David Abdurachmanov <david.abdurachmanov@sifive.com>
++ */
++
++#include <linux/io.h>
++#include <asm/arch/eeprom.h>
++
++struct pwm_sifive_regs {
++	unsigned int cfg;	/* PWM configuration register */
++	unsigned int pad0;	/* Reserved */
++	unsigned int cnt;	/* PWM count register */
++	unsigned int pad1;	/* Reserved */
++	unsigned int pwms;	/* Scaled PWM count register */
++	unsigned int pad2;	/* Reserved */
++	unsigned int pad3;	/* Reserved */
++	unsigned int pad4;	/* Reserved */
++	unsigned int cmp0;	/* PWM 0 compare register */
++	unsigned int cmp1;	/* PWM 1 compare register */
++	unsigned int cmp2;	/* PWM 2 compare register */
++	unsigned int cmp3;	/* PWM 3 compare register */
++};
++
++#define PWM0_BASE		0x10020000
++#define PWM1_BASE		0x10021000
++#define PWM_CFG_INIT		0x1000
++#define PWM_CMP_ENABLE_VAL	0x0
++#define PWM_CMP_DISABLE_VAL	0xffff
++
++void pwm_device_init(void)
++{
++	struct pwm_sifive_regs *pwm0, *pwm1;
++	pwm0 = (struct pwm_sifive_regs *)PWM0_BASE;
++	pwm1 = (struct pwm_sifive_regs *)PWM1_BASE;
++	writel(PWM_CMP_DISABLE_VAL, (void *)&pwm0->cmp0);
++	/* Set the 3-color PWM LEDs to yellow in SPL */
++	writel(PWM_CMP_ENABLE_VAL, (void *)&pwm0->cmp1);
++	writel(PWM_CMP_ENABLE_VAL, (void *)&pwm0->cmp2);
++	writel(PWM_CMP_DISABLE_VAL, (void *)&pwm0->cmp3);
++	writel(PWM_CFG_INIT, (void *)&pwm0->cfg);
++
++	writel(PWM_CMP_DISABLE_VAL, (void *)&pwm0->cmp3);
++	/* Turn on all the fans, (J21), (J23) and (J24), on the unmatched board */
++	/* The SoC fan(J21) on the rev3 board cannot be controled by PWM_COMP0,
++	   so here sets the initial value of PWM_COMP0 as DISABLE */
++	if (get_pcb_revision_from_eeprom() == PCB_REVISION_REV3)
++		writel(PWM_CMP_DISABLE_VAL, (void *)&pwm1->cmp1);
++	else
++		writel(PWM_CMP_ENABLE_VAL, (void *)&pwm1->cmp1);
++	writel(PWM_CMP_ENABLE_VAL, (void *)&pwm1->cmp2);
++	writel(PWM_CMP_ENABLE_VAL, (void *)&pwm1->cmp3);
++	writel(PWM_CFG_INIT, (void *)&pwm1->cfg);
++}
+diff --git a/board/sifive/unmatched/spl.c b/board/sifive/unmatched/spl.c
+index 7c0beedc08..f3a661a81e 100644
+--- a/board/sifive/unmatched/spl.c
++++ b/board/sifive/unmatched/spl.c
+@@ -90,6 +90,8 @@ int spl_board_init_f(void)
+ 		goto end;
+ 	}
+ 
++	pwm_device_init();
++
+ 	ret = spl_gemgxl_init();
+ 	if (ret) {
+ 		debug("Gigabit ethernet PHY (VSC8541) init failed: %d\n", ret);
+-- 
+2.27.0
+

package/boot/uboot-sifiveu/patches/0003-board-sifive-Set-LED-s-color-to-purple-in-the-U-boot.patch

@@ -0,0 +1,68 @@
+From 7ead6d662a2f9d8498af6650ea38418c64b52048 Mon Sep 17 00:00:00 2001
+From: Vincent Chen <vincent.chen@sifive.com>
+Date: Mon, 24 Jan 2022 02:42:02 -0800
+Subject: [PATCH 3/8] board: sifive: Set LED's color to purple in the U-boot
+ stage
+
+Set LED's color to purple in the U-boot stage. Because there are still
+some functions to be executed before board_early_init_f(), it means
+the LED's is not changed to purple instantly when entering the U-boot
+stage.
+---
+ board/sifive/unmatched/pwm.c       | 7 +++++++
+ board/sifive/unmatched/unmatched.c | 6 ++++++
+ configs/sifive_unmatched_defconfig | 1 +
+ 3 files changed, 14 insertions(+)
+
+diff --git a/board/sifive/unmatched/pwm.c b/board/sifive/unmatched/pwm.c
+index e1cc02310a..bd67672c22 100644
+--- a/board/sifive/unmatched/pwm.c
++++ b/board/sifive/unmatched/pwm.c
+@@ -36,6 +36,7 @@ void pwm_device_init(void)
+ 	struct pwm_sifive_regs *pwm0, *pwm1;
+ 	pwm0 = (struct pwm_sifive_regs *)PWM0_BASE;
+ 	pwm1 = (struct pwm_sifive_regs *)PWM1_BASE;
++#ifdef CONFIG_SPL_BUILD
+ 	writel(PWM_CMP_DISABLE_VAL, (void *)&pwm0->cmp0);
+ 	/* Set the 3-color PWM LEDs to yellow in SPL */
+ 	writel(PWM_CMP_ENABLE_VAL, (void *)&pwm0->cmp1);
+@@ -54,4 +55,10 @@ void pwm_device_init(void)
+ 	writel(PWM_CMP_ENABLE_VAL, (void *)&pwm1->cmp2);
+ 	writel(PWM_CMP_ENABLE_VAL, (void *)&pwm1->cmp3);
+ 	writel(PWM_CFG_INIT, (void *)&pwm1->cfg);
++#else
++	/* Set the 3-color PWM LEDs to purple in U-boot */
++	writel(PWM_CMP_DISABLE_VAL, (void *)&pwm0->cmp1);
++	writel(PWM_CMP_ENABLE_VAL, (void *)&pwm0->cmp2);
++	writel(PWM_CMP_ENABLE_VAL, (void *)&pwm0->cmp3);
++#endif
+ }
+diff --git a/board/sifive/unmatched/unmatched.c b/board/sifive/unmatched/unmatched.c
+index 6295deeae2..30c082d001 100644
+--- a/board/sifive/unmatched/unmatched.c
++++ b/board/sifive/unmatched/unmatched.c
+@@ -22,6 +22,12 @@ void *board_fdt_blob_setup(int *err)
+ 	return (ulong *)&_end;
+ }
+ 
++int board_early_init_f(void)
++{
++	pwm_device_init();
++	return 0;
++}
++
+ int board_init(void)
+ {
+ 	/* enable all cache ways */
+diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig
+index d400ed0b23..0758f8e90f 100644
+--- a/configs/sifive_unmatched_defconfig
++++ b/configs/sifive_unmatched_defconfig
+@@ -51,3 +51,4 @@ CONFIG_DM_SCSI=y
+ CONFIG_USB=y
+ CONFIG_USB_XHCI_HCD=y
+ CONFIG_USB_XHCI_PCI=y
++CONFIG_BOARD_EARLY_INIT_F=y
+-- 
+2.27.0
+

package/boot/uboot-sifiveu/patches/0004-board-sifive-Set-LED-s-color-to-blue-before-jumping-.patch

@@ -0,0 +1,30 @@
+From 6ef7023c0dcfde320015ab19e0e0d423921be77d Mon Sep 17 00:00:00 2001
+From: Vincent Chen <vincent.chen@sifive.com>
+Date: Mon, 15 Nov 2021 03:39:07 -0800
+Subject: [PATCH 1/2] board: sifive: Set LED's color to blue before jumping to
+ Linux
+
+The LED's color wil be changed from purple to blue before executing
+the sysboot command. Because the sysboot command includes the image loading
+from the boot partition, It means the LED's color is blue when executing
+"Retrieving file: /Image.gz".
+---
+ include/configs/sifive-unmatched.h | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+--- a/include/configs/sifive-unmatched.h
++++ b/include/configs/sifive-unmatched.h
+@@ -49,7 +49,12 @@
+ 	"type_guid_gpt_system=" TYPE_GUID_SYSTEM "\0" \
+ 	"partitions=" PARTS_DEFAULT "\0" \
+ 	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+-	BOOTENV
++	"setled_blue=mw.l 0x10020024 0x0000ffff; mw.l 0x10020028 0x0000ffff; mw.l 0x1002002c 0x0\0" \
++	BOOTENV \
++	"boot_extlinux=" \
++		"run setled_blue; " \
++		"sysboot ${devtype} ${devnum}:${distro_bootpart} any " \
++			"${scriptaddr} ${prefix}${boot_syslinux_conf};\0"
+ 
+ #define CONFIG_SYS_EEPROM_BUS_NUM		0
+ 

package/boot/uboot-sifiveu/patches/0005-board-sifive-spl-Set-remote-thermal-of-TMP451-to-85-.patch

@@ -0,0 +1,111 @@
+From 07f84ed283b913cbdf87181ae2ed65467d923df5 Mon Sep 17 00:00:00 2001
+From: Vincent Chen <vincent.chen@sifive.com>
+Date: Mon, 24 Jan 2022 02:57:40 -0800
+Subject: [PATCH 2/2] board: sifive: spl: Set remote thermal of TMP451 to 85
+ deg C for the unmatched board
+
+For TMP451 on the unmatched board, the default value of the remote
+thermal threshold is 108 deg C. This commit initilizes it to 85 deg C at SPL.
+---
+ board/sifive/unmatched/spl.c       | 29 +++++++++++++++++++++++++++++
+ drivers/misc/Kconfig               | 10 ++++++++++
+ include/configs/sifive-unmatched.h |  4 ++++
+ scripts/config_whitelist.txt       |  1 +
+ 4 files changed, 44 insertions(+)
+
+--- a/board/sifive/unmatched/spl.c
++++ b/board/sifive/unmatched/spl.c
+@@ -10,6 +10,8 @@
+ #include <spl.h>
+ #include <misc.h>
+ #include <log.h>
++#include <config.h>
++#include <i2c.h>
+ #include <linux/delay.h>
+ #include <linux/io.h>
+ #include <asm/gpio.h>
+@@ -26,6 +28,27 @@
+ #define MODE_SELECT_SD		0xb
+ #define MODE_SELECT_MASK	GENMASK(3, 0)
+ 
++#define TMP451_REMOTE_THERM_LIMIT_REG_OFFSET	0x19
++#define TMP451_REMOTE_THERM_LIMIT_INIT_VALUE	0x55
++
++static inline int init_tmp451_remote_therm_limit(void)
++{
++	struct udevice *dev;
++	unsigned char r_therm_limit = TMP451_REMOTE_THERM_LIMIT_INIT_VALUE;
++	int ret;
++
++	ret = i2c_get_chip_for_busnum(CONFIG_SYS_TMP451_BUS_NUM,
++				      CONFIG_SYS_I2C_TMP451_ADDR,
++				      CONFIG_SYS_I2C_TMP451_ADDR_LEN,
++				      &dev);
++
++	if (!ret)
++		ret = dm_i2c_write(dev, TMP451_REMOTE_THERM_LIMIT_REG_OFFSET,
++				   &r_therm_limit,
++				   sizeof(unsigned char));
++	return ret;
++}
++
+ static inline int spl_reset_device_by_gpio(const char *label, int pin, int low_width)
+ {
+ 	int ret;
+@@ -92,6 +115,12 @@ int spl_board_init_f(void)
+ 
+ 	pwm_device_init();
+ 
++	ret = init_tmp451_remote_therm_limit();
++	if (ret) {
++		debug("TMP451 remote THERM limit init failed: %d\n", ret);
++		goto end;
++	}
++
+ 	ret = spl_gemgxl_init();
+ 	if (ret) {
+ 		debug("Gigabit ethernet PHY (VSC8541) init failed: %d\n", ret);
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -536,8 +536,18 @@ config SYS_I2C_EEPROM_ADDR
+ 	depends on ID_EEPROM || I2C_EEPROM || SPL_I2C_EEPROM || CMD_EEPROM || ENV_IS_IN_EEPROM
+ 	default 0
+ 
++config SYS_I2C_TMP451_ADDR
++	hex "Chip address of the TMP451 device"
++	default 0
++
+ if I2C_EEPROM
+ 
++config SYS_I2C_TMP451_ADDR_LEN
++	int "Length in bytes of the TMP451 memory array address"
++	default 1
++	help
++	  Note: This is NOT the chip address length!
++
+ config SYS_I2C_EEPROM_ADDR_OVERFLOW
+ 	hex "EEPROM Address Overflow"
+ 	default 0x0
+--- a/include/configs/sifive-unmatched.h
++++ b/include/configs/sifive-unmatched.h
+@@ -15,6 +15,10 @@
+ 
+ #define CONFIG_STANDALONE_LOAD_ADDR	0x80200000
+ 
++#define CONFIG_SYS_TMP451_BUS_NUM	0
++#define CONFIG_SYS_I2C_TMP451_ADDR	0x4c
++#define CONFIG_SYS_I2C_TMP451_ADDR_LEN	0x1
++
+ /* Environment options */
+ 
+ #define BOOT_TARGET_DEVICES(func) \
+--- a/scripts/config_whitelist.txt
++++ b/scripts/config_whitelist.txt
+@@ -1268,6 +1268,7 @@ CONFIG_SYS_TIMER_BASE
+ CONFIG_SYS_TIMER_COUNTER
+ CONFIG_SYS_TIMER_COUNTS_DOWN
+ CONFIG_SYS_TIMER_RATE
++CONFIG_SYS_TMP451_BUS_NUM
+ CONFIG_SYS_TMPVIRT
+ CONFIG_SYS_TSEC1_OFFSET
+ CONFIG_SYS_TX_ETH_BUFFER

package/boot/uboot-sifiveu/patches/0008-riscv-dts-Add-few-PMU-events.patch

@@ -0,0 +1,36 @@
+From c29e4d84cfa17ab96eff2a9044f486ba3c8b5c43 Mon Sep 17 00:00:00 2001
+From: Atish Patra <atish.patra@wdc.com>
+Date: Mon, 25 Oct 2021 11:35:41 -0700
+Subject: [PATCH] riscv: dts: Add few PMU events
+
+fu740 has 2 HPM counters and many HPM events defined in the fu740 manual[1].
+This patch adds some of these events and their mapping as per the
+OpenSBI PMU DT binding for now.
+
+[1]https://sifive.cdn.prismic.io/sifive/de1491e5-077c-461d-9605-e8a0ce57337d_fu740-c000-manual-v1p3.pdf
+
+Signed-off-by: Atish Patra <atish.patra@wdc.com>
+---
+ arch/riscv/dts/fu740-c000.dtsi | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+--- a/arch/riscv/dts/fu740-c000.dtsi
++++ b/arch/riscv/dts/fu740-c000.dtsi
+@@ -140,6 +140,17 @@
+ 		#size-cells = <2>;
+ 		compatible = "simple-bus";
+ 		ranges;
++		pmu {
++			compatible = "riscv,pmu";
++			riscv,raw-event-to-mhpmcounters = <0x00000000 0x200 0x18
++							 0x00000000 0x400 0x18
++							 0x00000000 0x800 0x18>;
++			riscv,event-to-mhpmcounters = <0x05 0x06 0x18
++						     0x10009 0x10009 0x18>;
++			riscv,event-to-mhpmevent = <0x05 0x00000000 0x4000
++						  0x06 0x00000000 0x4001
++						  0x10008 0x00000000 0x102>;
++		};
+ 		plic0: interrupt-controller@c000000 {
+ 			#interrupt-cells = <1>;
+ 			#address-cells = <0>;

package/boot/uboot-sifiveu/patches/0009-riscv-Fix-build-against-binutils.patch

@@ -0,0 +1,50 @@
+commit 1dde977518f13824b847e23275001191139bc384
+Author: Alexandre Ghiti <alexandre.ghiti@canonical.com>
+Date:   Mon Oct 3 18:07:54 2022 +0200
+
+    riscv: Fix build against binutils 2.38
+    
+    The following description is copied from the equivalent patch for the
+    Linux Kernel proposed by Aurelien Jarno:
+    
+    >From version 2.38, binutils default to ISA spec version 20191213. This
+    means that the csr read/write (csrr*/csrw*) instructions and fence.i
+    instruction has separated from the `I` extension, become two standalone
+    extensions: Zicsr and Zifencei. As the kernel uses those instruction,
+    this causes the following build failure:
+    
+    arch/riscv/cpu/mtrap.S: Assembler messages:
+    arch/riscv/cpu/mtrap.S:65: Error: unrecognized opcode `csrr a0,scause'
+    arch/riscv/cpu/mtrap.S:66: Error: unrecognized opcode `csrr a1,sepc'
+    arch/riscv/cpu/mtrap.S:67: Error: unrecognized opcode `csrr a2,stval'
+    arch/riscv/cpu/mtrap.S:70: Error: unrecognized opcode `csrw sepc,a0'
+    
+    Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
+    Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
+    Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
+    Tested-by: Heiko Stuebner <heiko@sntech.de>
+    Tested-by: Christian Stewart <christian@paral.in>
+    Reviewed-by: Rick Chen <rick@andestech.com>
+
+diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
+index 0b80eb8d86..53d1194ffb 100644
+--- a/arch/riscv/Makefile
++++ b/arch/riscv/Makefile
+@@ -24,7 +24,16 @@ ifeq ($(CONFIG_CMODEL_MEDANY),y)
+ 	CMODEL = medany
+ endif
+ 
+-ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) \
++RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_C)
++
++# Newer binutils versions default to ISA spec version 20191213 which moves some
++# instructions from the I extension to the Zicsr and Zifencei extensions.
++toolchain-need-zicsr-zifencei := $(call cc-option-yn, -mabi=$(ABI) -march=$(RISCV_MARCH)_zicsr_zifencei)
++ifeq ($(toolchain-need-zicsr-zifencei),y)
++	RISCV_MARCH := $(RISCV_MARCH)_zicsr_zifencei
++endif
++
++ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \
+ 	     -mcmodel=$(CMODEL)
+ 
+ PLATFORM_CPPFLAGS	+= $(ARCH_FLAGS)

package/boot/uboot-sifiveu/patches/100-mkimage-check-environment-for-dtc-binary-location.patch

@@ -0,0 +1,35 @@
+From 637800493945ffed2f454756300437a4ec86e3b1 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 19 Jul 2017 22:23:15 +0200
+Subject: mkimage: check environment for dtc binary location
+
+Currently mkimage assumes the dtc binary is in the path and fails
+otherwise. This patch makes it check the DTC environment variable first
+for the dtc binary and then fall back to the default path. This makes
+it possible to call the u-boot build with make DTC=... and build a fit
+image with the dtc binary not being the the default path.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+Cc: Simon Glass <sjg@chromium.org>
+---
+ tools/fit_image.c | 7 ++++++-
+ 1 file changed, 6 insertions(+), 1 deletion(-)
+
+--- a/tools/fit_image.c
++++ b/tools/fit_image.c
+@@ -726,9 +726,14 @@ static int fit_handle_file(struct image_
+ 		}
+ 		*cmd = '\0';
+ 	} else if (params->datafile) {
++		const char* dtc = getenv("DTC");
++
++		if (!dtc)
++			dtc = MKIMAGE_DTC;
++
+ 		/* dtc -I dts -O dtb -p 500 -o tmpfile datafile */
+ 		snprintf(cmd, sizeof(cmd), "%s %s -o \"%s\" \"%s\"",
+-			 MKIMAGE_DTC, params->dtc, tmpfile, params->datafile);
++			 dtc, params->dtc, tmpfile, params->datafile);
+ 		debug("Trying to execute \"%s\"\n", cmd);
+ 	} else {
+ 		snprintf(cmd, sizeof(cmd), "cp \"%s\" \"%s\"",

package/boot/uboot-sifiveu/patches/110-no-kwbimage.patch

@@ -0,0 +1,10 @@
+--- a/tools/Makefile
++++ b/tools/Makefile
+@@ -119,7 +119,6 @@ dumpimage-mkimage-objs := aisimage.o \
+ 			imximage.o \
+ 			imx8image.o \
+ 			imx8mimage.o \
+-			kwbimage.o \
+ 			lib/md5.o \
+ 			lpc32xximage.o \
+ 			mxsimage.o \

package/boot/uboot-sifiveu/patches/130-fix-mkimage-host-build.patch

@@ -0,0 +1,24 @@
+--- a/tools/image-host.c
++++ b/tools/image-host.c
+@@ -1125,6 +1125,7 @@ static int fit_config_add_verification_d
+  * 2) get public key (X509_get_pubkey)
+  * 3) provide der format (d2i_RSAPublicKey)
+  */
++#ifdef CONFIG_TOOLS_LIBCRYPTO
+ static int read_pub_key(const char *keydir, const void *name,
+ 			unsigned char **pubkey, int *pubkey_len)
+ {
+@@ -1178,6 +1179,13 @@ err_cert:
+ 	fclose(f);
+ 	return ret;
+ }
++#else
++static int read_pub_key(const char *keydir, const void *name,
++			unsigned char **pubkey, int *pubkey_len)
++{
++	return -ENOSYS;
++}
++#endif
+ 
+ int fit_pre_load_data(const char *keydir, void *keydest, void *fit)
+ {

package/boot/uboot-sifiveu/patches/300-force-pylibfdt-build.patch

@@ -0,0 +1,30 @@
+--- a/Makefile
++++ b/Makefile
+@@ -2028,26 +2028,7 @@ endif
+ # Check dtc and pylibfdt, if DTC is provided, else build them
+ PHONY += scripts_dtc
+ scripts_dtc: scripts_basic
+-	$(Q)if test "$(DTC)" = "$(DTC_INTREE)"; then \
+-		$(MAKE) $(build)=scripts/dtc; \
+-	else \
+-		if ! $(DTC) -v >/dev/null; then \
+-			echo '*** Failed to check dtc version: $(DTC)'; \
+-			false; \
+-		else \
+-			if test "$(call dtc-version)" -lt $(DTC_MIN_VERSION); then \
+-				echo '*** Your dtc is too old, please upgrade to dtc $(DTC_MIN_VERSION) or newer'; \
+-				false; \
+-			else \
+-				if [ -n "$(CONFIG_PYLIBFDT)" ]; then \
+-					if ! echo "import libfdt" | $(PYTHON3) 2>/dev/null; then \
+-						echo '*** pylibfdt does not seem to be available with $(PYTHON3)'; \
+-						false; \
+-					fi; \
+-				fi; \
+-			fi; \
+-		fi; \
+-	fi
++	$(MAKE) $(build)=scripts/dtc
+ 
+ # ---------------------------------------------------------------------------
+ quiet_cmd_cpp_lds = LDS     $@

package/boot/uboot-sifiveu/uEnv-default.txt

@@ -0,0 +1,5 @@
+setenv loadkernel fatload mmc 0:3 \$kernel_addr_r Image
+setenv loaddtb fatload mmc 0:3 \$fdt_addr_r dtb
+setenv bootargs console=ttySIF0,115200 earlycon=sbi root=/dev/mmcblk0p4 rootwait
+setenv uenvcmd run loadkernel \&\& run loaddtb \&\& booti \$kernel_addr_r - \$fdt_addr_r
+run uenvcmd

package/devel/kselftests-bpf/Makefile

@@ -0,0 +1,63 @@
+#
+# Copyright (C) 2021 Tony Ambardar <itugrok@yahoo.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=kselftests-bpf
+PKG_VERSION:=$(LINUX_VERSION)
+PKG_RELEASE:=1
+PKG_MAINTAINER:=Tony Ambardar <itugrok@yahoo.com>
+
+PKG_BUILD_FLAGS:=gc-sections lto
+PKG_BUILD_PARALLEL:=1
+PKG_FLAGS:=nonshared
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/kselftests-bpf
+  SECTION:=devel
+  CATEGORY:=Development
+  DEPENDS:= +libelf +zlib +libpthread +librt @!IN_SDK \
+	    @KERNEL_DEBUG_FS @KERNEL_DEBUG_INFO_BTF @KERNEL_BPF_EVENTS
+  TITLE:=Linux Kernel Selftests (BPF)
+  URL:=http://www.kernel.org
+endef
+
+define Package/kselftests-bpf/description
+  kselftests-bpf is the Linux kernel BPF test suite
+endef
+
+TEST_TARGET = test_verifier
+
+MAKE_PATH:=tools/testing/selftests/bpf
+
+MAKE_VARS = \
+	ARCH="$(LINUX_KARCH)" \
+	CROSS_COMPILE="$(TARGET_CROSS)" \
+	SAN_CFLAGS="$(TARGET_CFLAGS) $(TARGET_CPPFLAGS)" \
+	LDLIBS="$(TARGET_LDFLAGS)" \
+	TOOLCHAIN_INCLUDE="$(TOOLCHAIN_DIR)/include" \
+	VMLINUX_BTF="$(LINUX_DIR)/vmlinux"
+
+MAKE_FLAGS = \
+	$(if $(findstring c,$(OPENWRT_VERBOSE)),V=1,V='') \
+	O=$(PKG_BUILD_DIR)
+
+define Build/Compile
+	+$(MAKE_VARS) \
+	$(MAKE) $(PKG_JOBS) -C $(LINUX_DIR)/$(MAKE_PATH) \
+		$(MAKE_FLAGS) $(TEST_TARGET) ;
+endef
+
+define Package/kselftests-bpf/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(TEST_TARGET) $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,kselftests-bpf))

package/devel/valgrind/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=valgrind
-PKG_VERSION:=3.20.0
+PKG_VERSION:=3.21.0
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=https://sourceware.org/pub/valgrind/
-PKG_HASH:=8536c031dbe078d342f121fa881a9ecd205cb5a78e639005ad570011bdb9f3c6
+PKG_HASH:=10ce1618bb3e33fad16eb79552b0a3e1211762448a0d7fce11c8a6243b9ac971
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_LICENSE:=GPL-2.0+

package/devel/valgrind/patches/010-mips-Fix-new-syscall-numbers.patch

@@ -1,11 +1,11 @@
-From 86ab9452bd10f08dbfa22d94e1155838f6f9f2e0 Mon Sep 17 00:00:00 2001
+From 82e935c564699456a766044faa39367b47cce793 Mon Sep 17 00:00:00 2001
 From: Hauke Mehrtens <hauke@hauke-m.de>
 Date: Sun, 31 Oct 2021 23:11:11 +0100
 Subject: [PATCH] mips: Fix new syscall numbers
 
 The MIPS32 and MIPS64 O32 ABI are adding 4000 to all syscall numbers.
 The MIPS64 N64 ABI adds 5000 to each syscall and the MIPS64 N32 ABI adds
-6000 to each syscall number. We can not sue the shared file for MIPS and
+6000 to each syscall number. We can not use the shared file for MIPS and
 have to define this for each sycall separately.
 
 Without this change valgrind is not able to detect new syscalls like
@@ -13,10 +13,10 @@ clock_gettime64 correctly.
 
 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 ---
- include/pub_tool_vkiscnums_asm.h      |  3 ---
- include/vki/vki-scnums-mips32-linux.h | 36 +++++++++++++++++++++++++++
- include/vki/vki-scnums-mips64-linux.h | 32 ++++++++++++++++++++++++
- 3 files changed, 68 insertions(+), 3 deletions(-)
+ include/pub_tool_vkiscnums_asm.h      |  3 --
+ include/vki/vki-scnums-mips32-linux.h | 40 +++++++++++++++++++++++++++
+ include/vki/vki-scnums-mips64-linux.h | 40 +++++++++++++++++++++++++++
+ 3 files changed, 80 insertions(+), 3 deletions(-)
 
 --- a/include/pub_tool_vkiscnums_asm.h
 +++ b/include/pub_tool_vkiscnums_asm.h
@@ -38,7 +38,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  #elif defined(VGP_x86_freebsd) || defined(VGP_amd64_freebsd)
 --- a/include/vki/vki-scnums-mips32-linux.h
 +++ b/include/vki/vki-scnums-mips32-linux.h
-@@ -401,6 +401,42 @@
+@@ -401,6 +401,46 @@
  #define __NR_pkey_free			(__NR_Linux + 365)
  #define __NR_statx			(__NR_Linux + 366)
  
@@ -73,17 +73,21 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +#define __NR_fsmount			(__NR_Linux + 432)
 +#define __NR_fspick			(__NR_Linux + 433)
 +
++#define __NR_pidfd_open			(__NR_Linux + 434)
 +#define __NR_clone3			(__NR_Linux + 435)
 +#define __NR_close_range		(__NR_Linux + 436)
++#define __NR_openat2			(__NR_Linux + 437)
 +
 +#define __NR_faccessat2			(__NR_Linux + 439)
++
++#define __NR_epoll_pwait2		(__NR_Linux + 441)
 +
  /*
   * Offset of the last Linux o32 flavoured syscall
   */
 --- a/include/vki/vki-scnums-mips64-linux.h
 +++ b/include/vki/vki-scnums-mips64-linux.h
-@@ -363,6 +363,22 @@
+@@ -363,6 +363,26 @@
  #define __NR_pkey_free              (__NR_Linux + 325)
  #define __NR_statx                  (__NR_Linux + 326)
  
@@ -98,15 +102,19 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +#define __NR_fsmount                 (__NR_Linux + 432)
 +#define __NR_fspick                  (__NR_Linux + 433)
 +
++#define __NR_pidfd_open              (__NR_Linux + 434)
 +#define __NR_clone3                  (__NR_Linux + 435)
 +#define __NR_close_range             (__NR_Linux + 436)
++#define __NR_openat2                 (__NR_Linux + 437)
 +
 +#define __NR_faccessat2              (__NR_Linux + 439)
++
++#define __NR_epoll_pwait2            (__NR_Linux + 441)
 +
  #elif defined(VGABI_N32)
  
  /*
-@@ -702,6 +718,22 @@
+@@ -702,6 +722,26 @@
  #define __NR_pkey_free               (__NR_Linux + 329)
  #define __NR_statx                   (__NR_Linux + 330)
  
@@ -121,10 +129,14 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +#define __NR_fsmount                 (__NR_Linux + 432)
 +#define __NR_fspick                  (__NR_Linux + 433)
 +
++#define __NR_pidfd_open              (__NR_Linux + 434)
 +#define __NR_clone3                  (__NR_Linux + 435)
 +#define __NR_close_range             (__NR_Linux + 436)
++#define __NR_openat2                 (__NR_Linux + 437)
 +
 +#define __NR_faccessat2              (__NR_Linux + 439)
++
++#define __NR_epoll_pwait2            (__NR_Linux + 441)
 +
  #else
  #error unknown mips64 abi

package/devel/valgrind/patches/100-fix_configure_check.patch

@@ -1,6 +1,6 @@
 --- a/configure.ac
 +++ b/configure.ac
-@@ -368,7 +368,7 @@ case "${host_os}" in
+@@ -364,7 +364,7 @@ case "${host_os}" in
          # Ok, this is linux. Check the kernel version
          AC_MSG_CHECKING([for the kernel version])
  

package/devel/valgrind/patches/130-fix_arm_arch_detection.patch

@@ -6,7 +6,7 @@ Last-Update: 2013-11-30
 
 --- a/configure.ac
 +++ b/configure.ac
-@@ -275,7 +275,7 @@ case "${host_cpu}" in
+@@ -271,7 +271,7 @@ case "${host_cpu}" in
          ARCH_MAX="s390x"
          ;;
  

package/firmware/ipq-wifi/Makefile

@@ -6,9 +6,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
-PKG_SOURCE_DATE:=2023-04-12
-PKG_SOURCE_VERSION:=b22487d729362feaff7d06354353d005a3a9d6b7
-PKG_MIRROR_HASH:=94eea9db636b2cbf6782ec17d8b8fe36770c61ff283702ec418df1a1b09f54ef
+PKG_SOURCE_DATE:=2023-06-03
+PKG_SOURCE_VERSION:=cd9c30ca47b8e5388b770c523a7f6b8b969e2f92
+PKG_MIRROR_HASH:=45e623fcc512b514ade0f22e217275536aa8de4afba7dfdb11696482b8fa71a2
 
 PKG_FLAGS:=nonshared
 
@@ -29,10 +29,12 @@ endef
 
 ALLWIFIBOARDS:= \
 	buffalo_wxr-5950ax12 \
+	compex_wpq873 \
 	dynalink_dl-wrx36 \
 	edgecore_eap102 \
 	edimax_cax1800 \
 	netgear_wax218 \
+	prpl_haze \
 	qnap_301w \
 	redmi_ax6 \
 	wallys_dr40x9 \
@@ -113,11 +115,13 @@ endef
 # Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
 
 $(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
+$(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
 $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
 $(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
 $(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
 $(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
 $(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
+$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
 $(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
 $(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
 $(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))

package/firmware/layerscape/ls-dpl/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=21.08
 PKG_RELEASE:=3
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/mc-utils
+PKG_SOURCE_URL:=https://github.com/nxp-qoriq/mc-utils
 PKG_SOURCE_VERSION:=LSDK-21.08
 PKG_MIRROR_HASH:=372498ff4b5c8a1ac64ead5856d03ee021332f57771989ed6fe066745372b242
 

package/kernel/linux/modules/crypto.mk

@@ -897,10 +897,12 @@ define KernelPackage/crypto-sha1/mpc85xx
   AUTOLOAD+=$(call AutoLoad,09,sha1-ppc-spe)
 endef
 
+ifndef CONFIG_TARGET_uml
 define KernelPackage/crypto-sha1/x86_64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha1-ssse3.ko
   AUTOLOAD+=$(call AutoLoad,09,sha1-ssse3)
 endef
+endif
 
 ifdef KernelPackage/crypto-sha1/$(ARCH)
   KernelPackage/crypto-sha1/$(CRYPTO_TARGET)=\
@@ -935,10 +937,12 @@ define KernelPackage/crypto-sha256/mpc85xx
   AUTOLOAD+=$(call AutoLoad,09,sha256-ppc-spe)
 endef
 
+ifndef CONFIG_TARGET_uml
 define KernelPackage/crypto-sha256/x86_64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha256-ssse3.ko
   AUTOLOAD+=$(call AutoLoad,09,sha256-ssse3)
 endef
+endif
 
 ifdef KernelPackage/crypto-sha256/$(ARCH)
   KernelPackage/crypto-sha256/$(CRYPTO_TARGET)=\
@@ -977,10 +981,12 @@ endef
 
 KernelPackage/crypto-sha512/tegra=$(KernelPackage/crypto-sha512/arm)
 
+ifndef CONFIG_TARGET_uml
 define KernelPackage/crypto-sha512/x86_64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha512-ssse3.ko
   AUTOLOAD+=$(call AutoLoad,09,sha512-ssse3)
 endef
+endif
 
 ifdef KernelPackage/crypto-sha512/$(ARCH)
   KernelPackage/crypto-sha512/$(CRYPTO_TARGET)=\

package/kernel/linux/modules/netdevices.mk

@@ -141,7 +141,7 @@ $(eval $(call KernelPackage,mii))
 define KernelPackage/mdio-devres
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Supports MDIO device registration
-  DEPENDS:=+kmod-libphy +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_malta||TARGET_tegra):kmod-of-mdio
+  DEPENDS:=+kmod-libphy +(TARGET_armsr||TARGET_bcm27xx_bcm2708||TARGET_malta||TARGET_tegra):kmod-of-mdio
   KCONFIG:=CONFIG_MDIO_DEVRES
   HIDDEN:=1
   FILES:=$(LINUX_DIR)/drivers/net/phy/mdio_devres.ko
@@ -158,7 +158,7 @@ $(eval $(call KernelPackage,mdio-devres))
 define KernelPackage/mdio-gpio
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:= Supports GPIO lib-based MDIO busses
-  DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_malta||TARGET_tegra):kmod-of-mdio
+  DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armsr||TARGET_bcm27xx_bcm2708||TARGET_malta||TARGET_tegra):kmod-of-mdio
   KCONFIG:= \
 	CONFIG_MDIO_BITBANG \
 	CONFIG_MDIO_GPIO
@@ -437,7 +437,7 @@ $(eval $(call KernelPackage,switch-rtl8306))
 define KernelPackage/switch-rtl8366-smi
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Realtek RTL8366 SMI switch interface support
-  DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_malta||TARGET_tegra):kmod-of-mdio
+  DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armsr||TARGET_bcm27xx_bcm2708||TARGET_malta||TARGET_tegra):kmod-of-mdio
   KCONFIG:=CONFIG_RTL8366_SMI
   FILES:=$(LINUX_DIR)/drivers/net/phy/rtl8366_smi.ko
   AUTOLOAD:=$(call AutoLoad,42,rtl8366_smi,1)
@@ -1522,7 +1522,6 @@ endef
 
 $(eval $(call KernelPackage,atlantic))
 
-
 define KernelPackage/lan743x
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Microchip LAN743x PCI Express Gigabit Ethernet NIC
@@ -1538,3 +1537,18 @@ endef
 
 $(eval $(call KernelPackage,lan743x))
 
+define KernelPackage/amazon-ena
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  TITLE:=Elastic Network Adapter (for Amazon AWS)
+  DEPENDS:=@TARGET_x86_64||TARGET_armsr_armv8
+  KCONFIG:=CONFIG_ENA_ETHERNET
+  FILES:=$(LINUX_DIR)/drivers/net/ethernet/amazon/ena/ena.ko
+  AUTOLOAD:=$(call AutoLoad,12,ena)
+endef
+
+define KernelPackage/amazon-ena/description
+  This driver supports Elastic Network Adapter (ENA)
+  used by Amazon AWS T3 (2018) and later instances.
+endef
+
+$(eval $(call KernelPackage,amazon-ena))

package/kernel/linux/modules/netfilter.mk

@@ -1,6 +1,6 @@
 
 #
-# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2006-2023 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -197,7 +197,7 @@ $(eval $(call KernelPackage,nf-flow))
 define KernelPackage/nf-socket
   SUBMENU:=$(NF_MENU)
   TITLE:=Netfilter socket lookup support
-  KCONFIG:= $(KCOFNIG_NF_SOCKET)
+  KCONFIG:= $(KCONFIG_NF_SOCKET)
   FILES:=$(foreach mod,$(NF_SOCKET-m),$(LINUX_DIR)/net/$(mod).ko)
   AUTOLOAD:=$(call AutoProbe,$(notdir $(NF_SOCKET-m)))
 endef
@@ -208,7 +208,7 @@ $(eval $(call KernelPackage,nf-socket))
 define KernelPackage/nf-tproxy
   SUBMENU:=$(NF_MENU)
   TITLE:=Netfilter tproxy support
-  KCONFIG:= $(KCOFNIG_NF_TPROXY)
+  KCONFIG:= $(KCONFIG_NF_TPROXY)
   FILES:=$(foreach mod,$(NF_TPROXY-m),$(LINUX_DIR)/net/$(mod).ko)
   AUTOLOAD:=$(call AutoProbe,$(notdir $(NF_TPROXY-m)))
 endef
@@ -1147,6 +1147,26 @@ endef
 $(eval $(call KernelPackage,nft-bridge))
 
 
+define KernelPackage/nft-dup-inet
+  SUBMENU:=$(NF_MENU)
+  TITLE:=Netfilter nf_tables dup in ip/ip6/inet family support
+  DEPENDS:=+kmod-nft-core +kmod-nf-conntrack +IPV6:kmod-nf-conntrack6
+  KCONFIG:= \
+	CONFIG_NF_DUP_IPV4 \
+	CONFIG_NF_DUP_IPV6 \
+	CONFIG_NFT_DUP_IPV4 \
+	CONFIG_NFT_DUP_IPV6
+  FILES:= \
+	$(LINUX_DIR)/net/ipv4/netfilter/nf_dup_ipv4.ko \
+	$(LINUX_DIR)/net/ipv6/netfilter/nf_dup_ipv6.ko \
+	$(LINUX_DIR)/net/ipv4/netfilter/nft_dup_ipv4.ko \
+	$(LINUX_DIR)/net/ipv6/netfilter/nft_dup_ipv6.ko
+  AUTOLOAD:=$(call AutoProbe,nf_dup_ipv4 nf_dup_ipv6 nft_dup_ipv4 nft_dup_ipv6)
+endef
+
+$(eval $(call KernelPackage,nft-dup-inet))
+
+
 define KernelPackage/nft-nat
   SUBMENU:=$(NF_MENU)
   TITLE:=Netfilter nf_tables NAT support

package/kernel/linux/modules/netsupport.mk

@@ -1359,6 +1359,21 @@ endef
 
 $(eval $(call KernelPackage,mdio))
 
+define KernelPackage/mdio-bus-mux
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=MDIO bus multiplexers
+  KCONFIG:=CONFIG_MDIO_BUS_MUX
+  HIDDEN:=1
+  FILES:=$(LINUX_DIR)/drivers/net/mdio/mdio-mux.ko
+  AUTOLOAD:=$(call AutoLoad,32,mdio-mux)
+endef
+
+define KernelPackage/mdio-bus-mux/description
+ Kernel framework for MDIO bus multiplexers.
+endef
+
+$(eval $(call KernelPackage,mdio-bus-mux))
+
 define KernelPackage/macsec
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
   TITLE:=IEEE 802.1AE MAC-level encryption (MAC)

package/kernel/mac80211/Makefile

@@ -11,7 +11,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=mac80211
 
 PKG_VERSION:=6.1.24
-PKG_RELEASE:=2
+PKG_RELEASE:=3
 # PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.15.58/
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources/
 PKG_HASH:=5d39aca7e34c33cb9b3e366117b2e86841b7bdd37933679d6b1e61be6b150648

package/kernel/mac80211/patches/ath11k/0070-wifi-ath-work-around-false-positive-stringop-overrea.patch

@@ -0,0 +1,84 @@
+From 695df2f417d25202bdac9cde3c82d2acb6492b4d Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Fri, 5 May 2023 16:11:25 +0300
+Subject: [PATCH] wifi: ath: work around false-positive stringop-overread
+ warning
+
+In a rare arm64 randconfig build, I got multiple warnings for ath11k
+and ath12k:
+
+In function 'ath11k_peer_assoc_h_ht',
+    inlined from 'ath11k_peer_assoc_prepare' at drivers/net/wireless/ath/ath11k/mac.c:2665:2:
+drivers/net/wireless/ath/ath11k/mac.c:1709:13: error: 'ath11k_peer_assoc_h_ht_masked' reading 10 bytes from a region of size 0 [-Werror=stringop-overread]
+ 1709 |         if (ath11k_peer_assoc_h_ht_masked(ht_mcs_mask))
+      |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This happens whenever gcc-13 fails to inline one of the functions
+that take a fixed-length array argument but gets passed a pointer.
+
+Change these functions to all take a regular pointer argument
+instead.
+
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230417205447.1800912-1-arnd@kernel.org
+---
+ drivers/net/wireless/ath/ath11k/mac.c | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -433,7 +433,7 @@ u8 ath11k_mac_bitrate_to_idx(const struc
+ }
+ 
+ static u32
+-ath11k_mac_max_ht_nss(const u8 ht_mcs_mask[IEEE80211_HT_MCS_MASK_LEN])
++ath11k_mac_max_ht_nss(const u8 *ht_mcs_mask)
+ {
+ 	int nss;
+ 
+@@ -445,7 +445,7 @@ ath11k_mac_max_ht_nss(const u8 ht_mcs_ma
+ }
+ 
+ static u32
+-ath11k_mac_max_vht_nss(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX])
++ath11k_mac_max_vht_nss(const u16 *vht_mcs_mask)
+ {
+ 	int nss;
+ 
+@@ -457,7 +457,7 @@ ath11k_mac_max_vht_nss(const u16 vht_mcs
+ }
+ 
+ static u32
+-ath11k_mac_max_he_nss(const u16 he_mcs_mask[NL80211_HE_NSS_MAX])
++ath11k_mac_max_he_nss(const u16 *he_mcs_mask)
+ {
+ 	int nss;
+ 
+@@ -1658,7 +1658,7 @@ static void ath11k_peer_assoc_h_rates(st
+ }
+ 
+ static bool
+-ath11k_peer_assoc_h_ht_masked(const u8 ht_mcs_mask[IEEE80211_HT_MCS_MASK_LEN])
++ath11k_peer_assoc_h_ht_masked(const u8 *ht_mcs_mask)
+ {
+ 	int nss;
+ 
+@@ -1670,7 +1670,7 @@ ath11k_peer_assoc_h_ht_masked(const u8 h
+ }
+ 
+ static bool
+-ath11k_peer_assoc_h_vht_masked(const u16 vht_mcs_mask[])
++ath11k_peer_assoc_h_vht_masked(const u16 *vht_mcs_mask)
+ {
+ 	int nss;
+ 
+@@ -2065,7 +2065,7 @@ static u16 ath11k_peer_assoc_h_he_limit(
+ }
+ 
+ static bool
+-ath11k_peer_assoc_h_he_masked(const u16 he_mcs_mask[NL80211_HE_NSS_MAX])
++ath11k_peer_assoc_h_he_masked(const u16 *he_mcs_mask)
+ {
+ 	int nss;
+ 

package/kernel/mac80211/patches/ath11k/0071-wifi-ath11k-driver-settings-for-MBSSID-and-EMA.patch

@@ -0,0 +1,133 @@
+From a08dbb04d7365a04d52882143cf196005bfc88c3 Mon Sep 17 00:00:00 2001
+From: Aloka Dixit <quic_alokad@quicinc.com>
+Date: Fri, 5 May 2023 16:11:27 +0300
+Subject: [PATCH 71/77] wifi: ath11k: driver settings for MBSSID and EMA
+
+Advertise the driver support for multiple BSSID (MBSSID) and
+enhanced multi-BSSID advertisements (EMA) by setting extended
+capabilities.
+
+Configure mbssid_max_interfaces and ema_max_profile_periodicity
+fields in structure wiphy which are used to advertise maximum number
+of interfaces and profile periodicity supported by the driver.
+
+Add new WMI fields to configure maximum vdev count supported for
+MBSSID and profile periodicity in case of EMA.
+Setting WMI_RSRC_CFG_FLAG2_CALC_NEXT_DTIM_COUNT_SET flag
+indicates that the firmware should track and update the DTIM counts
+for each non-transmitted profile.
+
+Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
+Co-developed-by: John Crispin <john@phrozen.org>
+Signed-off-by: John Crispin <john@phrozen.org>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230405221648.17950-2-quic_alokad@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/hw.c  | 3 +++
+ drivers/net/wireless/ath/ath11k/hw.h  | 1 +
+ drivers/net/wireless/ath/ath11k/mac.c | 7 +++++++
+ drivers/net/wireless/ath/ath11k/wmi.c | 3 +++
+ drivers/net/wireless/ath/ath11k/wmi.h | 6 ++++++
+ 5 files changed, 20 insertions(+)
+
+--- a/drivers/net/wireless/ath/ath11k/hw.c
++++ b/drivers/net/wireless/ath/ath11k/hw.c
+@@ -202,6 +202,9 @@ static void ath11k_init_wmi_config_ipq80
+ 	config->twt_ap_sta_count = 1000;
+ 	config->flag1 |= WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64;
+ 	config->flag1 |= WMI_RSRC_CFG_FLAG1_ACK_RSSI;
++	config->ema_max_vap_cnt = ab->num_radios;
++	config->ema_max_profile_period = TARGET_EMA_MAX_PROFILE_PERIOD;
++	config->beacon_tx_offload_max_vdev += config->ema_max_vap_cnt;
+ }
+ 
+ static int ath11k_hw_mac_id_to_pdev_id_ipq8074(struct ath11k_hw_params *hw,
+--- a/drivers/net/wireless/ath/ath11k/hw.h
++++ b/drivers/net/wireless/ath/ath11k/hw.h
+@@ -64,6 +64,7 @@
+ #define TARGET_NUM_WDS_ENTRIES		32
+ #define TARGET_DMA_BURST_SIZE		1
+ #define TARGET_RX_BATCHMODE		1
++#define TARGET_EMA_MAX_PROFILE_PERIOD	8
+ 
+ #define ATH11K_HW_MAX_QUEUES		4
+ #define ATH11K_QUEUE_LEN		4096
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -9001,19 +9001,23 @@ static int ath11k_mac_setup_iface_combin
+ 
+ static const u8 ath11k_if_types_ext_capa[] = {
+ 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
++	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
+ 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
+ };
+ 
+ static const u8 ath11k_if_types_ext_capa_sta[] = {
+ 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
++	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
+ 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
+ 	[9] = WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT,
+ };
+ 
+ static const u8 ath11k_if_types_ext_capa_ap[] = {
+ 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
++	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
+ 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
+ 	[9] = WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT,
++	[10] = WLAN_EXT_CAPA11_EMA_SUPPORT,
+ };
+ 
+ static const struct wiphy_iftype_ext_capab ath11k_iftypes_ext_capa[] = {
+@@ -9251,6 +9255,9 @@ static int __ath11k_mac_register(struct
+ 		wiphy_ext_feature_set(ar->hw->wiphy,
+ 				      NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER);
+ 
++	ar->hw->wiphy->mbssid_max_interfaces = TARGET_NUM_VDEVS(ab);
++	ar->hw->wiphy->ema_max_profile_periodicity = TARGET_EMA_MAX_PROFILE_PERIOD;
++
+ 	ath11k_reg_init(ar);
+ 
+ 	if (!test_bit(ATH11K_FLAG_RAW_MODE, &ab->dev_flags)) {
+--- a/drivers/net/wireless/ath/ath11k/wmi.c
++++ b/drivers/net/wireless/ath/ath11k/wmi.c
+@@ -3987,6 +3987,9 @@ ath11k_wmi_copy_resource_config(struct w
+ 		~(1 << WMI_CFG_HOST_SERVICE_FLAG_REG_CC_EXT);
+ 	wmi_cfg->host_service_flags |= (tg_cfg->is_reg_cc_ext_event_supported <<
+ 					WMI_CFG_HOST_SERVICE_FLAG_REG_CC_EXT);
++	wmi_cfg->flags2 = WMI_RSRC_CFG_FLAG2_CALC_NEXT_DTIM_COUNT_SET;
++	wmi_cfg->ema_max_vap_cnt = tg_cfg->ema_max_vap_cnt;
++	wmi_cfg->ema_max_profile_period = tg_cfg->ema_max_profile_period;
+ }
+ 
+ static int ath11k_init_cmd_send(struct ath11k_pdev_wmi *wmi,
+--- a/drivers/net/wireless/ath/ath11k/wmi.h
++++ b/drivers/net/wireless/ath/ath11k/wmi.h
+@@ -2317,6 +2317,7 @@ struct wmi_init_cmd {
+ } __packed;
+ 
+ #define WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64 BIT(5)
++#define WMI_RSRC_CFG_FLAG2_CALC_NEXT_DTIM_COUNT_SET BIT(9)
+ #define WMI_RSRC_CFG_FLAG1_ACK_RSSI BIT(18)
+ 
+ #define WMI_CFG_HOST_SERVICE_FLAG_REG_CC_EXT 4
+@@ -2389,6 +2390,9 @@ struct wmi_resource_config {
+ 	u32 msdu_flow_override_config1;
+ 	u32 flags2;
+ 	u32 host_service_flags;
++	u32 max_rnr_neighbours;
++	u32 ema_max_vap_cnt;
++	u32 ema_max_profile_period;
+ } __packed;
+ 
+ struct wmi_service_ready_event {
+@@ -5646,6 +5650,8 @@ struct target_resource_config {
+ 	u32 twt_ap_pdev_count;
+ 	u32 twt_ap_sta_count;
+ 	u8 is_reg_cc_ext_event_supported;
++	u32 ema_max_vap_cnt;
++	u32 ema_max_profile_period;
+ };
+ 
+ enum wmi_debug_log_param {