LEDE v17.01.2: adjust config defaults

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

config/Config-build.in

@@ -9,7 +9,7 @@ menu "Global build settings"
 
 	config ALL_NONSHARED
 		bool "Select all target specific packages by default"
-		default ALL
+		default ALL || BUILDBOT
 
 	config ALL_KMODS
 		bool "Select all kernel module packages by default"
@@ -19,6 +19,16 @@ menu "Global build settings"
 		bool "Select all userspace packages by default"
 		default n
 
+	config BUILDBOT
+		bool "Set build defaults for automatic builds (e.g. via buildbot)"
+		default n
+		help
+		  This option changes several defaults to be more suitable for
+		  automatic builds. This includes the following changes:
+		  - Deleting build directories after compiling (to save space)
+		  - Enabling per-device rootfs support
+		  ...
+
 	config SIGNED_PACKAGES
 		bool "Cryptographically signed package lists"
 		default y
@@ -61,7 +71,7 @@ menu "Global build settings"
 		bool
 		prompt "Collect kernel debug information"
 		select KERNEL_DEBUG_INFO
-		default n
+		default BUILDBOT
 		help
 		  This collects debugging symbols from the kernel and all compiled modules.
 		  Useful for release builds, so that kernel issues can be debugged offline

config/Config-images.in

@@ -201,7 +201,6 @@ menu "Target Images"
 		int "Serial port baud rate"
 		depends on GRUB_IMAGES
 		default 38400 if TARGET_x86_generic
-		default 38400 if TARGET_x86_geode
 		default 115200
 
 	config GRUB_BOOTOPTS

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://git.lede-project.org/feed/packages.git;lede-17.01
-src-git luci https://git.lede-project.org/project/luci.git;lede-17.01
-src-git routing https://git.lede-project.org/feed/routing.git;lede-17.01
-src-git telephony https://git.lede-project.org/feed/telephony.git;lede-17.01
+src-git packages https://git.lede-project.org/feed/packages.git^dc558eaa296686603c1730c1aab01f3ea69d7831
+src-git luci https://git.lede-project.org/project/luci.git^7f6fc1681f7becc514a58082e871f3855d3a123f
+src-git routing https://git.lede-project.org/feed/routing.git^dbbad8472288498c17825303d834da3ee5030806
+src-git telephony https://git.lede-project.org/feed/telephony.git^1f0fb2538ba6fc306198fe2a9a4b976d63adb304

include/cmake.mk

@@ -107,3 +107,7 @@ define Host/Configure/Default
 		$(HOST_CMAKE_SOURCE_DIR) \
 	)
 endef
+
+MAKE_FLAGS += \
+	CMAKE_COMMAND='$$(if $$(CMAKE_DISABLE_$$@),:,$(STAGING_DIR_HOST)/bin/cmake)' \
+	CMAKE_DISABLE_cmake_check_build_system=1

include/image.mk

@@ -277,7 +277,7 @@ endif
 
 ifdef CONFIG_TARGET_ROOTFS_CPIOGZ
   define Image/Build/cpiogz
-	( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9n >$(BIN_DIR)/$(IMG_PREFIX)-rootfs.cpio.gz )
+	( cd $(TARGET_DIR); find . | cpio -o -H newc -R root:root | gzip -9n >$(BIN_DIR)/$(IMG_PREFIX)-rootfs.cpio.gz )
   endef
 endif
 
@@ -420,7 +420,7 @@ define Device/Build/initramfs
   $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)
 	cp $$^ $$@
 
-  $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/$$(KERNEL_INITRAMFS_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS)
+  $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/$$(KERNEL_INITRAMFS_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS) image_prepare
 	@rm -f $$@
 	$$(call concat_cmd,$$(KERNEL_INITRAMFS))
 endef
@@ -444,7 +444,7 @@ define Device/Build/kernel
     ifdef CONFIG_IB
       install: $$(KDIR_KERNEL_IMAGE)
     endif
-    $$(KDIR_KERNEL_IMAGE): $(KDIR)/$$(KERNEL_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS)
+    $$(KDIR_KERNEL_IMAGE): $(KDIR)/$$(KERNEL_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS) image_prepare
 	@rm -f $$@
 	$$(call concat_cmd,$$(KERNEL))
 	$$(if $$(KERNEL_SIZE),$$(call Build/check-size,$$(KERNEL_SIZE)))

include/kernel-version.mk

@@ -3,10 +3,10 @@
 LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .43
-LINUX_VERSION-4.4 = .47
+LINUX_VERSION-4.4 = .71
 
 LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c
-LINUX_KERNEL_HASH-4.4.47 = ce0ac0016f37ba3e9bc8ad3765933b61c4072fcfe4c44804fc7b308cd7f94de7
+LINUX_KERNEL_HASH-4.4.71 = 44cd5532d6df32197fd0f89e6f8c542fcfb76b52155a4d3a609ef4898522e6ab
 
 ifdef KERNEL_PATCHVER
   LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))

include/kernel.mk

@@ -95,15 +95,16 @@ define ModuleAutoLoad
 	$(SH_FUNC) \
 	export modules=; \
 	probe_module() { \
-		mods="$$$$$$$$1"; \
-		boot="$$$$$$$$2"; \
+		local mods="$$$$$$$$1"; \
+		local boot="$$$$$$$$2"; \
+		local mod; \
 		shift 2; \
-		for mod in $(sort $$$$$$$$mods); do \
+		for mod in $$$$$$$$mods; do \
 			mkdir -p $(2)/etc/modules.d; \
 			echo "$$$$$$$$mod" >> $(2)/etc/modules.d/$(1); \
 		done; \
 		if [ -e $(2)/etc/modules.d/$(1) ]; then \
-			if [ "$$$$$$$$boot" = "1" ]; then \
+			if [ "$$$$$$$$boot" = "1" -a ! -e $(2)/etc/modules-boot.d/$(1) ]; then \
 				mkdir -p $(2)/etc/modules-boot.d; \
 				ln -s ../modules.d/$(1) $(2)/etc/modules-boot.d/; \
 			fi; \
@@ -111,16 +112,17 @@ define ModuleAutoLoad
 		fi; \
 	}; \
 	add_module() { \
-		priority="$$$$$$$$1"; \
-		mods="$$$$$$$$2"; \
-		boot="$$$$$$$$3"; \
+		local priority="$$$$$$$$1"; \
+		local mods="$$$$$$$$2"; \
+		local boot="$$$$$$$$3"; \
+		local mod; \
 		shift 3; \
-		for mod in $(sort $$$$$$$$mods); do \
+		for mod in $$$$$$$$mods; do \
 			mkdir -p $(2)/etc/modules.d; \
 			echo "$$$$$$$$mod" >> $(2)/etc/modules.d/$$$$$$$$priority-$(1); \
 		done; \
 		if [ -e $(2)/etc/modules.d/$$$$$$$$priority-$(1) ]; then \
-			if [ "$$$$$$$$boot" = "1" ]; then \
+			if [ "$$$$$$$$boot" = "1" -a ! -e $(2)/etc/modules-boot.d/$$$$$$$$priority-$(1) ]; then \
 				mkdir -p $(2)/etc/modules-boot.d; \
 				ln -s ../modules.d/$$$$$$$$priority-$(1) $(2)/etc/modules-boot.d/; \
 			fi; \
@@ -129,6 +131,7 @@ define ModuleAutoLoad
 	}; \
 	$(3) \
 	if [ -n "$$$$$$$$modules" ]; then \
+		modules="$$$$$$$$(echo "$$$$$$$$modules" | tr ' ' '\n' | sort | uniq | paste -s -d' ')"; \
 		mkdir -p $(2)/etc/modules.d; \
 		mkdir -p $(2)/CONTROL; \
 		echo "#!/bin/sh" > $(2)/CONTROL/postinst-pkg; \

include/toplevel.mk

@@ -23,6 +23,7 @@ HOSTCC ?= $(CC)
 export REVISION
 export SOURCE_DATE_EPOCH
 export GIT_CONFIG_PARAMETERS='core.autocrlf=false'
+export GIT_ASKPASS:=/bin/true
 export MAKE_JOBSERVER=$(filter --jobserver%,$(MAKEFLAGS))
 
 # prevent perforce from messing with the patch utility
@@ -126,7 +127,7 @@ menuconfig: scripts/config/mconf prepare-tmpinfo FORCE
 	if [ \! -e .config -a -e $(HOME)/.openwrt/defconfig ]; then \
 		cp $(HOME)/.openwrt/defconfig .config; \
 	fi
-	$< Config.in
+	[ -L .config ] && export KCONFIG_OVERWRITECONFIG=1; $< Config.in
 
 prepare_kernel_conf: .config FORCE
 
@@ -170,7 +171,7 @@ else
   DOWNLOAD_DIRS = package/download
 endif
 
-download: .config FORCE
+download: .config FORCE $(if $(wildcard $(TOPDIR)/staging_dir/host/bin/flock),,tools/flock/compile)
 	@+$(foreach dir,$(DOWNLOAD_DIRS),$(SUBMAKE) $(dir);)
 
 clean dirclean: .config

include/version.mk

@@ -31,16 +31,16 @@ qstrip_escape=$(subst ','\'',$(call qstrip,$(1)))
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip_escape,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),17.01-SNAPSHOT)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),17.01.2)
 
 VERSION_CODE:=$(call qstrip_escape,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),$(REVISION))
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r3435-65eec8bd5f)
 
 VERSION_NICK:=$(call qstrip_escape,$(CONFIG_VERSION_NICK))
 VERSION_NICK:=$(if $(VERSION_NICK),$(VERSION_NICK),$(RELEASE))
 
 VERSION_REPO:=$(call qstrip_escape,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),http://downloads.lede-project.org/releases/17.01-SNAPSHOT)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),http://downloads.lede-project.org/releases/17.01.2)
 
 VERSION_DIST:=$(call qstrip_escape,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),LEDE)

package/Makefile

@@ -56,7 +56,7 @@ $(curdir)/merge:
 $(curdir)/merge-index: $(curdir)/merge
 	(cd $(PACKAGE_DIR_ALL) && $(SCRIPT_DIR)/ipkg-make-index.sh . 2>&1 > Packages; )
 
-$(curdir)/install: $(TMP_DIR)/.build $(curdir)/system/opkg/host/install $(curdir)/merge $(if $(CONFIG_TARGET_PER_DEVICE_ROOTFS),$(curdir)/merge-index)
+$(curdir)/install: $(TMP_DIR)/.build $(curdir)/system/opkg/host/compile $(curdir)/merge $(if $(CONFIG_TARGET_PER_DEVICE_ROOTFS),$(curdir)/merge-index)
 	- find $(STAGING_DIR_ROOT) -type d | $(XARGS) chmod 0755
 	rm -rf $(TARGET_DIR) $(TARGET_DIR_ORIG)
 	[ -d $(TARGET_DIR)/tmp ] || mkdir -p $(TARGET_DIR)/tmp

package/base-files/Makefile

@@ -11,7 +11,7 @@ include $(INCLUDE_DIR)/kernel.mk
 include $(INCLUDE_DIR)/version.mk
 
 PKG_NAME:=base-files
-PKG_RELEASE:=172
+PKG_RELEASE:=173
 PKG_FLAGS:=nonshared
 
 PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/

package/base-files/files/lib/functions/network.sh

@@ -29,18 +29,9 @@ network_get_ipaddr() {
 # 1: destination variable
 # 2: interface
 network_get_ipaddr6() {
-	local __addr
-
-	if __network_ifstatus "__addr" "$2" "['ipv6-address','ipv6-prefix-assignment'][0].address"; then
-		case "$__addr" in
-			*:)	export "$1=${__addr}1" ;;
-			*)	export "$1=${__addr}" ;;
-		esac
-		return 0
-	fi
-
-	unset $1
-	return 1
+	__network_ifstatus "$1" "$2" "['ipv6-address'][0].address" || \
+		__network_ifstatus "$1" "$2" "['ipv6-prefix-assignment'][0]['local-address'].address" || \
+		return 1
 }
 
 # determine first IPv4 subnet of given logical interface
@@ -54,7 +45,36 @@ network_get_subnet() {
 # 1: destination variable
 # 2: interface
 network_get_subnet6() {
-	__network_ifstatus "$1" "$2" "['ipv6-address'][0]['address','mask']" "/"
+	local __nets __addr
+
+	if network_get_subnets6 __nets "$2"; then
+		# Attempt to return first non-fe80::/10, non-fc::/7 range
+		for __addr in $__nets; do
+			case "$__addr" in fe[8ab]?:*|f[cd]??:*)
+				continue
+			esac
+			export "$1=$__addr"
+			return 0
+		done
+
+		# Attempt to return first non-fe80::/10 range
+		for __addr in $__nets; do
+			case "$__addr" in fe[8ab]?:*)
+				continue
+			esac
+			export "$1=$__addr"
+			return 0
+		done
+
+		# Return first item
+		for __addr in $__nets; do
+			export "$1=$__addr"
+			return 0
+		done
+	fi
+
+	unset "$1"
+	return 1
 }
 
 # determine first IPv6 prefix of given logical interface
@@ -78,14 +98,19 @@ network_get_ipaddrs6() {
 	local __addr
 	local __list=""
 
-	if __network_ifstatus "__addr" "$2" "['ipv6-address','ipv6-prefix-assignment'][*].address"; then
+	if __network_ifstatus "__addr" "$2" "['ipv6-address'][*].address"; then
 		for __addr in $__addr; do
-			case "$__addr" in
-				*:) __list="${__list:+$__list }${__addr}1" ;;
-				*)  __list="${__list:+$__list }${__addr}"  ;;
-			esac
+			__list="${__list:+$__list }${__addr}"
 		done
+	fi
 
+	if __network_ifstatus "__addr" "$2" "['ipv6-prefix-assignment'][*]['local-address'].address"; then
+		for __addr in $__addr; do
+			__list="${__list:+$__list }${__addr}"
+		done
+	fi
+
+	if [ -n "$__list" ]; then
 		export "$1=$__list"
 		return 0
 	fi
@@ -98,18 +123,13 @@ network_get_ipaddrs6() {
 # 1: destination variable
 # 2: interface
 network_get_ipaddrs_all() {
-	local __addr
-	local __list=""
+	local __addr __addr6
 
-	if __network_ifstatus "__addr" "$2" "['ipv4-address','ipv6-address','ipv6-prefix-assignment'][*].address"; then
-		for __addr in $__addr; do
-			case "$__addr" in
-				*:) __list="${__list:+$__list }${__addr}1" ;;
-				*)  __list="${__list:+$__list }${__addr}"  ;;
-			esac
-		done
+	network_get_ipaddrs __addr "$2"
+	network_get_ipaddrs6 __addr6 "$2"
 
-		export "$1=$__list"
+	if [ -n "$__addr" -o -n "$__addr6" ]; then
+		export "$1=${__addr:+$__addr }$__addr6"
 		return 0
 	fi
 
@@ -128,17 +148,24 @@ network_get_subnets() {
 # 1: destination variable
 # 2: interface
 network_get_subnets6() {
-	local __addr
+	local __addr __mask
 	local __list=""
 
-	if __network_ifstatus "__addr" "$2" "['ipv6-address','ipv6-prefix-assignment'][*]['address','mask']" "/ "; then
+	if __network_ifstatus "__addr" "$2" "['ipv6-address'][*]['address','mask']" "/ "; then
 		for __addr in $__addr; do
-			case "$__addr" in
-				*:/*) __list="${__list:+$__list }${__addr%/*}1/${__addr##*/}" ;;
-				*)    __list="${__list:+$__list }${__addr}"                   ;;
-			esac
+			__list="${__list:+$__list }${__addr}"
 		done
+	fi
 
+	if __network_ifstatus "__addr" "$2" "['ipv6-prefix-assignment'][*]['local-address'].address" && \
+	   __network_ifstatus "__mask" "$2" "['ipv6-prefix-assignment'][*].mask"; then
+		for __addr in $__addr; do
+			__list="${__list:+$__list }${__addr}/${__mask%% *}"
+			__mask="${__mask#* }"
+		done
+	fi
+
+	if [ -n "$__list" ]; then
 		export "$1=$__list"
 		return 0
 	fi

package/base-files/files/lib/functions/uci-defaults.sh

@@ -35,7 +35,7 @@ _ucidef_set_interface() {
 	json_select_object "$name"
 	json_add_string ifname "$iface"
 
-	if ! json_is_a protocol string; then
+	if ! json_is_a protocol string || [ -n "$proto" ]; then
 		case "$proto" in
 			static|dhcp|none|pppoe) : ;;
 			*)
@@ -619,6 +619,26 @@ ucidef_add_gpio_switch() {
 	json_select ..
 }
 
+ucidef_set_hostname() {
+	local hostname="$1"
+
+	json_select_object system
+		json_add_string hostname "$hostname"
+	json_select ..
+}
+
+ucidef_set_ntpserver() {
+	local server
+
+	json_select_object system
+		json_select_array ntpserver
+			for server in "$@"; do
+				json_add_string "" "$server"
+			done
+		json_select ..
+	json_select ..
+}
+
 board_config_update() {
 	json_init
 	[ -f ${CFG} ] && json_load "$(cat ${CFG})"

package/base-files/files/sbin/wifi

@@ -6,8 +6,8 @@
 
 usage() {
 	cat <<EOF
-Usage: $0 [down|detect|reload|status]
-enables (default), disables or detects a wifi configuration.
+Usage: $0 [config|down|reload|status]
+enables (default), disables or configures devices not yet configured.
 EOF
 	exit 1
 }
@@ -145,6 +145,12 @@ wifi_reload() {
 	wifi_reload_legacy
 }
 
+wifi_detect_notice() {
+	>&2 echo "WARNING: Wifi detect is deprecated. Use wifi config instead"
+	>&2 echo "For more information, see commit 5f8f8a366136a07df661e31decce2458357c167a"
+	exit 1
+}
+
 wifi_config() {
 	[ ! -f /etc/config/wireless ] && touch /etc/config/wireless
 
@@ -229,7 +235,7 @@ scan_wifi
 
 case "$1" in
 	down) wifi_updown "disable" "$2";;
-	detect) ;;
+	detect) wifi_detect_notice ;;
 	config) wifi_config ;;
 	status) ubus_wifi_cmd "status" "$2";;
 	reload) wifi_reload "$2";;

package/base-files/image-config.in

@@ -190,7 +190,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "http://downloads.lede-project.org/releases/17.01-SNAPSHOT"
+		default "http://downloads.lede-project.org/releases/17.01.2"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:
@@ -262,7 +262,7 @@ if VERSIONOPT
 	config VERSION_CODE_FILENAMES
 		bool
 		prompt "Revision code in filenames"
-		default y
+		default n
 		help
 			Enable this to include the revision identifier or the configured
 			version code into the firmware image, SDK- and Image Builder archive
@@ -286,7 +286,7 @@ menuconfig PER_FEED_REPO
 
 	config PER_FEED_REPO_ADD_COMMENTED
 		bool "Comment out not enabled feeds"
-		default y
+		default !BUILDBOT
 		depends on PER_FEED_REPO && PER_FEED_REPO_ADD_DISABLED
 		help
 		  Add not enabled feeds as commented out source lines to opkg.conf.

package/boot/grub2/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=grub
-PKG_VERSION:=2.02~beta3
+PKG_VERSION:=2.02~rc1
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
@@ -17,7 +17,7 @@ PKG_SOURCE_URL:=http://alpha.gnu.org/gnu/grub \
 	http://gnualpha.uib.no/grub/ \
 	http://mirrors.fe.up.pt/pub/gnu-alpha/grub/ \
 	http://www.nic.funet.fi/pub/gnu/alpha/gnu/grub/
-PKG_HASH:=30ec3d555e52a702c3eef449872ef874eff28b320f40b55ffc47f70db8e5ada1
+PKG_HASH:=445239e9b96d1143c194c1d37851cf4196b83701c60172e49665e9d453d80278
 
 PKG_FIXUP:=autoreconf
 HOST_BUILD_PARALLEL:=1

package/boot/uboot-envtools/files/ar71xx

@@ -14,6 +14,8 @@ touch /etc/config/ubootenv
 board=$(ar71xx_board_name)
 
 case "$board" in
+a40|\
+a60|\
 alfa-ap120c|\
 all0258n|\
 ap90q|\
@@ -52,8 +54,10 @@ om2p|\
 om2p-hs|\
 om2p-hsv2|\
 om2p-hsv3|\
+om2p-hsv4|\
 om2p-lc|\
-om2pv2)
+om2pv2|\
+om2pv4)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
 	;;
 dap-2695-a1|\

package/boot/uboot-kirkwood/patches/150-goflexhome.patch

@@ -10,7 +10,7 @@
 -	"bootm 0x800000"
 +	"ubi part ubi; " \
 +	"ubi read 0x800000 kernel; " \
-+	"bootz 0x800000"
++	"bootm 0x800000"
  
  #define CONFIG_MTDPARTS \
 -	"mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"

package/devel/binutils/patches/0001-Do-not-pass-host-compiler-sanitization-flags-on-to-l.patch

@@ -0,0 +1,65 @@
+From 183eb37e25d903ccd68cc2d8f8a37e75872c03d2 Mon Sep 17 00:00:00 2001
+From: Nick Clifton <nickc@redhat.com>
+Date: Tue, 6 Sep 2016 17:35:35 +0100
+Subject: [PATCH 1/2] Do not pass host compiler sanitization flags on to linker
+ testsuite.
+
+	* Makefile.am (CFLAGS_FOR_TARGET): Define as a copy of CFLAGS but
+	without any sanitization options.
+	(CXXFLAGS_FOR_TARGET): Define as a copy of CXXFLAGS but	without
+	any sanitization options.
+	(check-DEJAGNU): Pass CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET
+	as CFLAGS and CXXFLAGS respectively.
+---
+ ld/Makefile.am | 8 ++++++--
+ ld/Makefile.in | 8 ++++++--
+ 2 files changed, 12 insertions(+), 4 deletions(-)
+
+--- a/ld/Makefile.am
++++ b/ld/Makefile.am
+@@ -136,6 +136,10 @@ CXX_FOR_TARGET = ` \
+     fi; \
+   fi`
+ 
++# Strip out sanitization options as we want to test building binaries without any extra paraphernalia
++CFLAGS_FOR_TARGET = `echo $(CFLAGS) | sed -e 's/-fsanitize=address//g' -e 's/-fsanitize=undefined//g'`
++CXXFLAGS_FOR_TARGET = `echo $(CXXFLAGS) | sed -e 's/-fsanitize=address//g' -e 's/-fsanitize=undefined//g'`
++
+ transform = s/^ld-new$$/$(installed_linker)/;@program_transform_name@
+ bin_PROGRAMS = ld-new
+ info_TEXINFOS = ld.texinfo
+@@ -2075,8 +2079,8 @@ check-DEJAGNU: site.exp
+ 	runtest=$(RUNTEST); \
+ 	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
+ 	  $$runtest --tool $(DEJATOOL) --srcdir $${srcroot}/testsuite \
+-		CC="$(CC_FOR_TARGET)" CFLAGS="$(CFLAGS)" \
+-		CXX="$(CXX_FOR_TARGET)" CXXFLAGS="$(CXXFLAGS)" \
++		CC="$(CC_FOR_TARGET)" CFLAGS="$(CFLAGS_FOR_TARGET)" \
++		CXX="$(CXX_FOR_TARGET)" CXXFLAGS="$(CXXFLAGS_FOR_TARGET)" \
+ 		CC_FOR_HOST="$(CC)" CFLAGS_FOR_HOST="$(CFLAGS)" \
+ 		OFILES="$(OFILES)" BFDLIB="$(TESTBFDLIB)" \
+ 		LIBIBERTY="$(LIBIBERTY) $(LIBINTL)" LIBS="$(LIBS)" \
+--- a/ld/Makefile.in
++++ b/ld/Makefile.in
+@@ -507,6 +507,10 @@ CXX_FOR_TARGET = ` \
+     fi; \
+   fi`
+ 
++
++# Strip out sanitization options as they require special host libraries.
++CFLAGS_FOR_TARGET = `echo $(CFLAGS) | sed -e 's/-fsanitize=address//g' -e 's/-fsanitize=undefined//g'`
++CXXFLAGS_FOR_TARGET = `echo $(CXXFLAGS) | sed -e 's/-fsanitize=address//g' -e 's/-fsanitize=undefined//g'`
+ info_TEXINFOS = ld.texinfo
+ ld_TEXINFOS = configdoc.texi
+ noinst_TEXINFOS = ldint.texinfo
+@@ -3644,8 +3648,8 @@ check-DEJAGNU: site.exp
+ 	runtest=$(RUNTEST); \
+ 	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
+ 	  $$runtest --tool $(DEJATOOL) --srcdir $${srcroot}/testsuite \
+-		CC="$(CC_FOR_TARGET)" CFLAGS="$(CFLAGS)" \
+-		CXX="$(CXX_FOR_TARGET)" CXXFLAGS="$(CXXFLAGS)" \
++		CC="$(CC_FOR_TARGET)" CFLAGS="$(CFLAGS_FOR_TARGET)" \
++		CXX="$(CXX_FOR_TARGET)" CXXFLAGS="$(CXXFLAGS_FOR_TARGET)" \
+ 		CC_FOR_HOST="$(CC)" CFLAGS_FOR_HOST="$(CFLAGS)" \
+ 		OFILES="$(OFILES)" BFDLIB="$(TESTBFDLIB)" \
+ 		LIBIBERTY="$(LIBIBERTY) $(LIBINTL)" LIBS="$(LIBS)" \

package/firmware/ath10k-firmware/Makefile

@@ -32,6 +32,11 @@ $(Package/ath10k-firmware-default)
   TITLE:=ath10k firmware for QCA9887 devices
 endef
 
+define Package/ath10k-firmware-qca9887-ct
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k-CT firmware for QCA9887 devices
+endef
+
 QCA9887_REV:=3cce88e245f2d685e49411c4f80998f94baf67b8
 QCA9887_FIRMWARE_FILE:=firmware-5.bin_10.2.4-1.0-00013
 QCA9887_FIRMWARE_FILE_HASH:=5966408bd41f309edb595344b8dd088c0fed212debfd91e5f3e8a55ea119c16d
@@ -58,7 +63,6 @@ $(eval $(call Download,ath10k-qca9887-board))
 
 define Package/ath10k-firmware-qca988x
 $(Package/ath10k-firmware-default)
-  DEFAULT:=PACKAGE_kmod-ath10k
   TITLE:=ath10k firmware for QCA988x devices
   SECTION:=firmware
   CATEGORY:=Firmware
@@ -72,13 +76,20 @@ define Download/ct-firmware
   URL_FILE:=$($(1)_FIRMWARE_FILE_CT)
 endef
 
-QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community.bin-19.rc1-lede
+QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community.bin-19-rc3-lede
 define Download/ath10k-firmware-qca988x-ct
   $(call Download/ct-firmware,QCA988X,)
-  HASH:=ad41b29a9eebf1066f993beb571f3bd13f14ea89336ef9d4f3b31ee57e7abe54
+  HASH:=4112d78161a2c20e7a9490ea8d04e9f919508bafb097d88761dcce026c26f93f
 endef
 $(eval $(call Download,ath10k-firmware-qca988x-ct))
 
+QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community.bin-19-rc3-lede
+define Download/ath10k-firmware-qca9887-ct
+  $(call Download/ct-firmware,QCA9887,ath10k-9887)
+  HASH:=18b61875726d4384de46f75dec1d42fea31aa6d66dba4940cb9d375bc98732e4
+endef
+$(eval $(call Download,ath10k-firmware-qca9887-ct))
+
 QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-9.bin-lede.001
 define Download/ath10k-firmware-qca99x0-ct
   $(call Download/ct-firmware,QCA99X0,ath10k-10-4)
@@ -107,6 +118,13 @@ $(Package/ath10k-firmware-default)
   CATEGORY:=Firmware
 endef
 
+define Package/ath10k-firmware-qca9887-ct
+$(Package/ath10k-firmware-default)
+  TITLE:=ath10k CT 10.1 firmware for QCA9887 devices
+  SECTION:=firmware
+  CATEGORY:=Firmware
+endef
+
 define Package/ath10k-firmware-qca988x-ct/description
 Alternative ath10k firmware for QCA988X from Candela Technologies.
 Enables IBSS and other features.  See:
@@ -116,6 +134,14 @@ is un-selected since the driver will try to load firmware-5.bin before
 firmware-2.bin
 endef
 
+define Package/ath10k-firmware-qca9887-ct/description
+Alternative ath10k firmware for QCA9887 from Candela Technologies.
+Enables IBSS and other features.  See:
+http://www.candelatech.com/ath10k-10.1.php
+This firmware conflicts with the standard 9887 firmware, so select only
+one.
+endef
+
 define Package/ath10k-firmware-qca99x0-ct/description
 Alternative ath10k firmware for QCA99x0 from Candela Technologies.
 Enables IBSS and other features.  See:
@@ -177,18 +203,18 @@ define Download/qca99x0-board
 endef
 $(eval $(call Download,qca99x0-board))
 
-QCA9984_BOARD_REV:=deb1832c56c706d0f6cb539113e09f0daaa52b5f
+QCA9984_BOARD_REV:=719c0127e52bd70559e71b85ab0331790e1bf66c
 QCA9984_BOARD_FILE:=board-2.bin
 QCA9984_BOARD_FILE_DL:=$(QCA9984_BOARD_FILE).$(QCA9984_BOARD_REV)
-QCA9984_FIRMWARE_REV:=deb1832c56c706d0f6cb539113e09f0daaa52b5f
-QCA9984_FIRMWARE_FILE:=firmware-5.bin_10.4-3.3-00102
+QCA9984_FIRMWARE_REV:=d43cb1188154037506e94abf3aa456cc934c6861
+QCA9984_FIRMWARE_FILE:=firmware-5.bin_10.4-3.4-00072
 QCA9984_FIRMWARE_FILE_DL:=$(QCA9984_FIRMWARE_FILE).$(QCA9984_FIRMWARE_REV)
 
 define Download/ath10k-qca9984-board
   URL:=https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA9984/hw1.0/
   URL_FILE:=$(QCA9984_BOARD_FILE)?id=$(QCA9984_BOARD_REV)
   FILE:=$(QCA9984_BOARD_FILE_DL)
-  HASH:=6a79ff0e8cc71549e771b41dbb7dad862d8e29da852f8aff25ce1e4bd5ea263e
+  HASH:=e968b214fd76d5b7859f71841ce40fbd5f47336c3ccbaf95e23f902f5e569aef
 endef
 $(eval $(call Download,ath10k-qca9984-board))
 
@@ -196,7 +222,7 @@ define Download/ath10k-qca9984-firmware
   URL:=https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA9984/hw1.0/
   URL_FILE:=$(QCA9984_FIRMWARE_FILE)?id=$(QCA9984_FIRMWARE_REV)
   FILE:=$(QCA9984_FIRMWARE_FILE_DL)
-  HASH:=490ad52df76a4fa8004a3a8c21dd43bb8262dd2816df48a6408706b82491f299
+  HASH:=28d5834e8c4ca8fcef9ea033cd8b9b0f9ee84ecf30dbde84c9c64bf8dd9912bc
 endef
 $(eval $(call Download,ath10k-qca9984-firmware))
 
@@ -224,6 +250,16 @@ define Package/ath10k-firmware-qca988x/install
 		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin
 endef
 
+define Package/ath10k-firmware-qca9887-ct/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9887) \
+		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/firmware-2.bin
+	$(INSTALL_DATA) \
+		$(DL_DIR)/$(QCA9887_BOARD_FILE_DL) \
+		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
+endef
+
 define Package/ath10k-firmware-qca988x-ct/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
 	$(INSTALL_DATA) \
@@ -297,6 +333,7 @@ $(eval $(call BuildPackage,ath10k-firmware-qca99x0))
 $(eval $(call BuildPackage,ath10k-firmware-qca6174))
 $(eval $(call BuildPackage,ath10k-firmware-qca9984))
 
+$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct))
 $(eval $(call BuildPackage,ath10k-firmware-qca988x-ct))
 $(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct))
 $(eval $(call BuildPackage,ath10k-firmware-qca9984-ct))

package/firmware/linux-firmware/marvell.mk

@@ -20,6 +20,15 @@ define Package/mwifiex-pcie-firmware/install
 endef
 $(eval $(call BuildPackage,mwifiex-pcie-firmware))
 
+Package/mwifiex-sdio-firmware = $(call Package/firmware-default,Marvell 8887 firmware)
+define Package/mwifiex-sdio-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mrvl
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/mrvl/sd8887_uapsta.bin \
+		$(1)/lib/firmware/mrvl/
+endef
+$(eval $(call BuildPackage,mwifiex-sdio-firmware))
+
 Package/libertas-usb-firmware = $(call Package/firmware-default,Marvell 8388/8682 USB firmware)
 define Package/libertas-usb-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/libertas

package/kernel/acx-mac80211/patches/300-api_sync.patch

@@ -81,3 +81,32 @@
  
  	adev->channel = channel;
  
+--- a/merge.c
++++ b/merge.c
+@@ -2776,7 +2776,10 @@ void acx_irq_work(struct work_struct *wo
+ 		/* HOST_INT_SCAN_COMPLETE */
+ 		if (irqmasked & HOST_INT_SCAN_COMPLETE) {
+ 			if (test_bit(ACX_FLAG_SCANNING, &adev->flags)) {
+-				ieee80211_scan_completed(adev->hw, false);
++				struct cfg80211_scan_info info = {
++					.aborted = false
++				};
++				ieee80211_scan_completed(adev->hw, &info);
+ 				log(L_INIT, "scan completed\n");
+ 				clear_bit(ACX_FLAG_SCANNING, &adev->flags);
+ 			}
+@@ -3138,10 +3141,13 @@ int acx_op_start(struct ieee80211_hw *hw
+ 
+ void acx_stop(acx_device_t *adev)
+ {
++	struct cfg80211_scan_info info = {
++		.aborted = true
++	};
+ 	acxmem_lock_flags;
+ 
+ 	if (test_bit(ACX_FLAG_SCANNING, &adev->flags)) {
+-		ieee80211_scan_completed(adev->hw, true);
++		ieee80211_scan_completed(adev->hw, &info);
+ 		acx_issue_cmd(adev, ACX1xx_CMD_STOP_SCAN, NULL, 0);
+ 		clear_bit(ACX_FLAG_SCANNING, &adev->flags);
+ 	}

package/kernel/ath10k-ct/Makefile

@@ -8,9 +8,9 @@ PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2017-01-10
-PKG_SOURCE_VERSION:=f5bacb83baf95e887c50c286606f4f565ef71d86
-PKG_MIRROR_HASH:=845950a177ed6dd7ad3f645df79403e9980f089a09b66e74a9b88abe58dfe5e6
+PKG_SOURCE_DATE:=2017-01-26
+PKG_SOURCE_VERSION:=d2bc84ff277936c58231f0c2280242eda4199e63
+PKG_MIRROR_HASH:=6b734b987db00b97b06faca686dcebc56fb23b93093afbb35d5cf534987269bf
 
 PKG_MAINTAINER:=Ben Greear <greearb@candelatech.com>
 PKG_BUILD_PARALLEL:=1
@@ -23,7 +23,7 @@ include $(INCLUDE_DIR)/package.mk
 define KernelPackage/ath10k-ct
   SUBMENU:=Wireless Drivers
   TITLE:=ath10k-ct driver optimized for CT ath10k firmware
-  DEPENDS:=+kmod-mac80211 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT @PCI_SUPPORT +@KERNEL_RELAY
+  DEPENDS:=+kmod-mac80211 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT @PCI_SUPPORT +@KERNEL_RELAY +kmod-hwmon-core
   FILES:=\
 	$(PKG_BUILD_DIR)/ath10k/ath10k_pci.ko \
 	$(PKG_BUILD_DIR)/ath10k/ath10k_core.ko

package/kernel/ath10k-ct/patches/100-kernel_compat.patch

@@ -0,0 +1,97 @@
+--- a/ath10k/debug.c
++++ b/ath10k/debug.c
+@@ -166,11 +166,11 @@ void ath10k_debug_print_hwfw_info(struct
+ 		    ar->id.subsystem_vendor, ar->id.subsystem_device);
+ 
+ 	ath10k_info(ar, "kconfig debug %d debugfs %d tracing %d dfs %d testmode %d\n",
+-		    config_enabled(CONFIG_ATH10K_DEBUG),
+-		    config_enabled(CONFIG_ATH10K_DEBUGFS),
+-		    config_enabled(CONFIG_ATH10K_TRACING),
+-		    config_enabled(CONFIG_ATH10K_DFS_CERTIFIED),
+-		    config_enabled(CONFIG_NL80211_TESTMODE));
++		    IS_ENABLED(CONFIG_ATH10K_DEBUG),
++		    IS_ENABLED(CONFIG_ATH10K_DEBUGFS),
++		    IS_ENABLED(CONFIG_ATH10K_TRACING),
++		    IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED),
++		    IS_ENABLED(CONFIG_NL80211_TESTMODE));
+ 
+ 	firmware = ar->normal_mode_fw.fw_file.firmware;
+ 	if (firmware)
+@@ -3397,7 +3397,7 @@ int ath10k_debug_register(struct ath10k
+ 	debugfs_create_file("nf_cal_period", S_IRUSR | S_IWUSR,
+ 			    ar->debug.debugfs_phy, ar, &fops_nf_cal_period);
+ 
+-	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
++	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) {
+ 		debugfs_create_file("dfs_simulate_radar", S_IWUSR,
+ 				    ar->debug.debugfs_phy, ar,
+ 				    &fops_simulate_radar);
+--- a/ath10k/mac.c
++++ b/ath10k/mac.c
+@@ -3556,7 +3556,7 @@ static void ath10k_regd_update(struct at
+ 
+ 	regpair = ar->ath_common.regulatory.regpair;
+ 
+-	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
++	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
+ 		nl_dfs_reg = ar->dfs_detector->region;
+ 		wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg);
+ 		ath10k_dbg(ar, ATH10K_DBG_REGULATORY,
+@@ -3590,7 +3590,7 @@ static void ath10k_reg_notifier(struct w
+ 
+ 	ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
+ 
+-	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
++	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
+ 		ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "reg-notifier: dfs region 0x%x\n",
+ 			   request->dfs_region);
+ 		result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector,
+@@ -8863,7 +8863,7 @@ int ath10k_mac_register(struct ath10k *a
+ 	if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
+ 		ar->hw->netdev_features = NETIF_F_HW_CSUM;
+ 
+-	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
++	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) {
+ 		/* Init ath dfs pattern detector */
+ 		ar->ath_common.debug_mask = ATH_DBG_DFS;
+ 		ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common,
+@@ -8908,7 +8908,7 @@ err_unregister:
+ 	ieee80211_unregister_hw(ar->hw);
+ 
+ err_dfs_detector_exit:
+-	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
++	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
+ 		ar->dfs_detector->exit(ar->dfs_detector);
+ 
+ err_free:
+@@ -8923,7 +8923,7 @@ void ath10k_mac_unregister(struct ath10k
+ {
+ 	ieee80211_unregister_hw(ar->hw);
+ 
+-	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
++	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
+ 		ar->dfs_detector->exit(ar->dfs_detector);
+ 
+ 	kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
+--- a/ath10k/thermal.c
++++ b/ath10k/thermal.c
+@@ -192,7 +192,7 @@ int ath10k_thermal_register(struct ath10
+ 
+ 	/* Avoid linking error on devm_hwmon_device_register_with_groups, I
+ 	 * guess linux/hwmon.h is missing proper stubs. */
+-	if (!config_enabled(CONFIG_HWMON))
++	if (!IS_ENABLED(CONFIG_HWMON))
+ 		return 0;
+ 
+ 	hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev,
+--- a/ath10k/wmi.c
++++ b/ath10k/wmi.c
+@@ -3788,7 +3788,7 @@ void ath10k_wmi_event_dfs(struct ath10k
+ 		   phyerr->tsf_timestamp, tsf, buf_len);
+ 
+ 	/* Skip event if DFS disabled */
+-	if (!config_enabled(CONFIG_ATH10K_DFS_CERTIFIED))
++	if (!IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED))
+ 		return;
+ 
+ 	ATH10K_DFS_STAT_INC(ar, pulses_total);

package/kernel/ath10k-ct/patches/110-api_fix.patch

@@ -0,0 +1,11 @@
+--- a/ath10k/htt_rx.c
++++ b/ath10k/htt_rx.c
+@@ -2490,7 +2490,7 @@ bool ath10k_htt_t2h_msg_handler(struct a
+ 		u32 freq = __le32_to_cpu(resp->chan_change.freq);
+ 
+ 		ar->tgt_oper_chan =
+-			__ieee80211_get_channel(ar->hw->wiphy, freq);
++			ieee80211_get_channel(ar->hw->wiphy, freq);
+ 		ath10k_dbg(ar, ATH10K_DBG_HTT,
+ 			   "htt chan change freq %u phymode %s\n",
+ 			   freq, ath10k_wmi_phymode_str(phymode));

package/kernel/brcm2708-gpu-fw/Makefile

@@ -1,6 +1,6 @@
 #
 # Copyright (C) 2012-2016 OpenWrt.org
-# Copyright (C) 2016 LEDE project
+# Copyright (C) 2017 LEDE project
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -9,8 +9,8 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=brcm2708-gpu-fw
-PKG_VERSION:=2016-12-04
-PKG_RELEASE:=d760a4ffd378c648ff5d9854e26dc868a5e1fd09
+PKG_VERSION:=2017-03-03
+PKG_RELEASE:=78c4983379de0537f49a97fb37ceaaf42632b28c
 
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)/rpi-firmware-$(PKG_RELEASE)
 
@@ -33,7 +33,7 @@ define Download/bootcode_bin
   FILE:=$(RPI_FIRMWARE_FILE)-bootcode.bin
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=bootcode.bin
-  HASH:=a11bd31647c25712648757be75a19fa78c1df6f2409c7bf9bd202903f0421c0c
+  HASH:=d990031baec20fe2cd5e24d9f3d6fc34891afdb128838d010d9a0249ae29ea6b
 endef
 $(eval $(call Download,bootcode_bin))
 
@@ -41,7 +41,7 @@ define Download/fixup_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup.dat
-  HASH:=93314d9e01fb53bdf4a25422de89d103cd2e779bd5e81663c658eaecd0c8018e
+  HASH:=38b69384f62bc7b64f17dcedc03c5582af6b4f8dfc25fe5904d4eb3181a3387b
 endef
 $(eval $(call Download,fixup_dat))
 
@@ -49,7 +49,7 @@ define Download/fixup_cd_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup_cd.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup_cd.dat
-  HASH:=638671b81590bfdda5eac683d2025e50bb71c663e702f047ef299e23722f6cdd
+  HASH:=05c682ffcc74cd1356f1b9a32a7034763bfea94e5cb54eaaa2e69affc1cd33d7
 endef
 $(eval $(call Download,fixup_cd_dat))
 
@@ -57,7 +57,7 @@ define Download/start_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start.elf
-  HASH:=cd60fdce9022fa1195a27f3fdf8eba9136476649006e33b72cbdb23dc3b74e90
+  HASH:=59b9d26b463a84f017fae186493bb54e642de6c7e0376b3cbe3375df6132edc0
 endef
 $(eval $(call Download,start_elf))
 
@@ -65,7 +65,7 @@ define Download/start_cd_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start_cd.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start_cd.elf
-  HASH:=2f0cdcdaad7b9bf64f5288e206d54e007597c0c4068a5b893c02e0f4c0785ca5
+  HASH:=fb9aea03eb6790062c100166444bf7d2b8a6cea605bd041f905fcacefacbbae2
 endef
 $(eval $(call Download,start_cd_elf))
 

package/kernel/ep80579-drivers/Makefile

@@ -1,92 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ep80579-drivers
-PKG_VERSION:=1.0.34
-PKG_RELEASE:=1
-
-PKG_SOURCE:=Embedded.L.1.0.34.ADI.R100.tar.gz
-PKG_SOURCE_URL:=ftp://ftp.adiengineering.com/Archive/OcracokeIsland/Drivers/Linux/1.0.34/
-PKG_HASH:=f00684176a3dd1dc9ea8d96ecd1ecade5103f351ed93b9e3a5ff5f3f3295e2a9
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/ep80579-drivers/Default
-  DEPENDS:=@TARGET_x86_ep80579
-endef
-
-define KernelPackage/ep80579-eth
-$(call KernelPackage/ep80579-drivers/Default)
-  SUBMENU:=Network Devices
-  TITLE:=Intel EP80579 ethernet driver
-  FILES:= \
-	$(PKG_BUILD_DIR)/Embedded/src/GbE/gcu.ko \
-	$(PKG_BUILD_DIR)/Embedded/src/GbE/iegbe.ko
-  AUTOLOAD:=$(call AutoLoad,40,gcu iegbe)
-endef
-
-define KernelPackage/ep80579-misc
-$(call KernelPackage/ep80579-drivers/Default)
-  SUBMENU:=Other modules
-  TITLE:=Misc. Intel EP80579 drivers (DMA,, gpio)
-  FILES:= \
-	$(PKG_BUILD_DIR)/Embedded/src/EDMA/dma.ko \
-	$(PKG_BUILD_DIR)/Embedded/src/GPIO/gpio.ko
-  AUTOLOAD:=$(call AutoLoad,40,gpio dma)
-endef
-
-define KernelPackage/ep80579-can
-$(call KernelPackage/ep80579-drivers/Default)
-  SUBMENU:=Other modules
-  TITLE:=Intel EP80579 CAN driver
-  FILES:= \
-	$(PKG_BUILD_DIR)/Embedded/src/1588/timesync.ko \
-	$(PKG_BUILD_DIR)/Embedded/src/CAN/can.ko
-  AUTOLOAD:=$(call AutoLoad,40,timesync can)
-endef
-
-define Build/Prepare
-	rm -rf $(PKG_BUILD_DIR)
-	mkdir -p $(PKG_BUILD_DIR)
-	tar xzvf $(DL_DIR)/$(PKG_SOURCE) -C $(PKG_BUILD_DIR)/
-	$(Build/Patch)
-endef
-
-define Build/Compile/Subdir
-	$(MAKE) -C "$(LINUX_DIR)" \
-		KSRC="$(LINUX_DIR)" \
-		KOBJ="$(LINUX_DIR)" \
-		ENV_DIR=$(PKG_BUILD_DIR)/Embedded \
-		SUBDIRS="$(PKG_BUILD_DIR)/Embedded/src/$(1)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCHIVER="$(TARGET_CROSS)ar" \
-		COMPILER="$(TARGET_CC)" \
-		LINKER="$(TARGET_CROSS)ld" \
-		ARCH="$(LINUX_KARCH)"
-endef
-
-define Build/Compile
-	$(call Build/Compile/Subdir,GbE)
-	$(call Build/Compile/Subdir,CAN)
-	$(call Build/Compile/Subdir,EDMA)
-	$(call Build/Compile/Subdir,GPIO)
-	$(call Build/Compile/Subdir,WDT)
-	$(call Build/Compile/Subdir,1588)
-endef
-
-define KernelPackage/ep80579-eth/install
-endef
-
-$(eval $(call KernelPackage,ep80579-can))
-$(eval $(call KernelPackage,ep80579-eth))
-$(eval $(call KernelPackage,ep80579-misc))
-

package/kernel/ep80579-drivers/patches/002-cflags_cleanup.patch

@@ -1,22 +0,0 @@
---- a/build_system/build_files/common.mk
-+++ b/build_system/build_files/common.mk
-@@ -122,7 +122,7 @@ CC=$(COMPILER)
- LD=$(LINKER)
- AR=$(ARCHIVER)
- 
--CFLAGS+=-O2
-+#CFLAGS+=-O2
- 
- 
- PWD= $(shell pwd)
---- a/build_system/build_files/OS/linux_2.6.mk
-+++ b/build_system/build_files/OS/linux_2.6.mk
-@@ -80,7 +80,7 @@ endif
- 
- 
- ifeq ($(OS_LEVEL), kernel_space)
--CFLAGS+= 
-+#CFLAGS+= 
- endif
- 
- 

package/kernel/ep80579-drivers/patches/003-new_irqf_constants.patch

@@ -1,53 +0,0 @@
---- a/Embedded/src/1588/1588.c
-+++ b/Embedded/src/1588/1588.c
-@@ -291,7 +291,7 @@ int pci_probe(struct pci_dev *dev, const
- 
-     }
- 
--    if ( request_irq(dev->irq, &timesync_isr, SA_SHIRQ, DRIVERNAME,
-+    if ( request_irq(dev->irq, &timesync_isr, IRQF_SHARED, DRIVERNAME,
-          &g_drvr_data) )
-     {
-       printk("%s-pci_probe: irq\n", DRIVERNAME);
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -424,7 +424,7 @@ int can_open(struct inode *inode, struct
-     err = request_irq(
-         can_os->irq,
-         can_irq_handler,
--        SA_SHIRQ,
-+        IRQF_SHARED,
-         iminor(can_os->inode) ? CAN_PROC_1 : CAN_PROC_0,
-         &(g_can_os[iminor(can_os->inode)])
-         );
---- a/Embedded/src/EDMA/dma_linux.c
-+++ b/Embedded/src/EDMA/dma_linux.c
-@@ -367,7 +367,7 @@ int32_t edma_resume(struct pci_dev *dev)
-         return -ENODEV;
-     }
- 
--    if (request_irq(dev->irq, &edma_irq_handler, SA_SHIRQ,
-+    if (request_irq(dev->irq, &edma_irq_handler, IRQF_SHARED,
-                         g_char_drvr_name, dev) )
-     {
- 
-@@ -829,7 +829,7 @@ int32_t edma_probe(struct pci_dev * dev,
-     /*
-     * Obtain a (shared) Interrupt Request (IRQ) Line from the OS.
-     */
--    if (request_irq(dev->irq, &edma_irq_handler, SA_SHIRQ,
-+    if (request_irq(dev->irq, &edma_irq_handler, IRQF_SHARED,
-                         g_char_drvr_name, dev) )
-     {
- 
---- a/Embedded/src/WDT/iwdt.c
-+++ b/Embedded/src/WDT/iwdt.c
-@@ -1461,7 +1461,7 @@ static int __init wdt_init_one(struct pc
- 
-      /* Request irq only if wdt_irq is other than 0 */
-      if (wdt_irq) {
--        if (request_irq(wdt_irq, wdt_isr, SA_INTERRUPT | SA_SHIRQ,
-+        if (request_irq(wdt_irq, wdt_isr, IRQF_DISABLED | IRQF_SHARED,
-            "iwdt", &wdt_miscdev)) {
-            printk("IRQ %d is not free.\n", wdt_irq);
-            return -EIO;

package/kernel/ep80579-drivers/patches/100-iegbe_netdev_ops.patch

@@ -1,56 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -724,6 +724,26 @@ static void iegbe_dump_eeprom(struct ieg
- 	kfree(data);
- }
- 
-+static const struct net_device_ops iegbe_netdev_ops = {
-+	.ndo_open		= iegbe_open,
-+	.ndo_stop		= iegbe_close,
-+	.ndo_start_xmit		= iegbe_xmit_frame,
-+	.ndo_get_stats		= iegbe_get_stats,
-+	.ndo_set_rx_mode	= iegbe_set_rx_mode,
-+	.ndo_set_mac_address	= iegbe_set_mac,
-+	.ndo_tx_timeout		= iegbe_tx_timeout,
-+	.ndo_change_mtu		= iegbe_change_mtu,
-+	.ndo_do_ioctl		= iegbe_ioctl,
-+	.ndo_validate_addr	= eth_validate_addr,
-+
-+	.ndo_vlan_rx_register	= iegbe_vlan_rx_register,
-+	.ndo_vlan_rx_add_vid	= iegbe_vlan_rx_add_vid,
-+	.ndo_vlan_rx_kill_vid	= iegbe_vlan_rx_kill_vid,
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+	.ndo_poll_controller	= iegbe_netpoll,
-+#endif
-+};
-+
- /**
-  * iegbe_probe - Device Initialization Routine
-  * @pdev: PCI device information struct
-@@ -800,24 +820,11 @@ static int __devinit iegbe_probe(struct
- 	if (!hw->hw_addr)
-         goto err_ioremap;
- 
--    netdev->open = &iegbe_open;
--    netdev->stop = &iegbe_close;
--    netdev->hard_start_xmit = &iegbe_xmit_frame;
--    netdev->get_stats = &iegbe_get_stats;
--	netdev->set_rx_mode = &iegbe_set_rx_mode;
--	netdev->set_mac_address = &iegbe_set_mac;
--    netdev->change_mtu = &iegbe_change_mtu;
--    netdev->do_ioctl = &iegbe_ioctl;
-+	netdev->netdev_ops = &iegbe_netdev_ops;
- 	set_ethtool_ops(netdev);
--    netdev->tx_timeout = &iegbe_tx_timeout;
- 	netdev->watchdog_timeo = 5 * HZ;
- 	netif_napi_add(netdev, &adapter->napi, iegbe_clean, 64);
--    netdev->vlan_rx_register = iegbe_vlan_rx_register;
--    netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
--    netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
--#ifdef CONFIG_NET_POLL_CONTROLLER
--    netdev->poll_controller = iegbe_netpoll;
--#endif
-+
- 	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
- 
- 

package/kernel/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch

@@ -1,41 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -3465,12 +3465,12 @@ static irqreturn_t iegbe_intr_msi(int ir
- 	    printk("Critical error! ICR = 0x%x\n", icr);
- 	    return IRQ_HANDLED;
- 	}
--	if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
-+	if (likely(napi_schedule_prep(&adapter->napi))) {
- 		adapter->total_tx_bytes = 0;
- 		adapter->total_tx_packets = 0;
- 		adapter->total_rx_bytes = 0;
- 		adapter->total_rx_packets = 0;
--		__netif_rx_schedule(netdev, &adapter->napi);
-+		__napi_schedule(&adapter->napi);
- 	} else
- 		iegbe_irq_enable(adapter);
- 
-@@ -3527,12 +3527,12 @@ iegbe_intr(int irq, void *data)
- 		E1000_WRITE_REG(&adapter->hw, IMC, ~0);
- 		E1000_WRITE_FLUSH(&adapter->hw);
- 	}
--	if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
-+	if (likely(napi_schedule_prep(&adapter->napi))) {
- 		adapter->total_tx_bytes = 0;
- 		adapter->total_tx_packets = 0;
- 		adapter->total_rx_bytes = 0;
- 		adapter->total_rx_packets = 0;
--		__netif_rx_schedule(netdev, &adapter->napi);
-+		__napi_schedule(&adapter->napi);
- 	} else
- 		/* this really should not happen! if it does it is basically a
- 		 * bug, but not a hard error, so enable ints and continue */
-@@ -3574,7 +3574,7 @@ static int iegbe_clean(struct napi_struc
- 	if (work_done < budget) {
- 		if (likely(adapter->itr_setting & 3))
- 			iegbe_set_itr(adapter);
--		netif_rx_complete(poll_dev, napi);
-+		napi_complete(napi);
- 		iegbe_irq_enable(adapter);
- 	}
- 

package/kernel/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch

@@ -1,103 +0,0 @@
---- a/Embedded/src/GbE/iegbe.h
-+++ b/Embedded/src/GbE/iegbe.h
-@@ -316,7 +316,6 @@ struct iegbe_adapter {
- 				int cleaned_count);
- 	struct iegbe_rx_ring *rx_ring;      /* One per active queue */
- 	struct napi_struct napi;
--	struct net_device *polling_netdev;  /* One per active queue */
- 
- 	int num_tx_queues;
- 	int num_rx_queues;
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -763,7 +763,7 @@ static int __devinit iegbe_probe(struct
- 	struct iegbe_hw *hw;
- 
- 	static int cards_found = 0;
--    int i, err, pci_using_dac;
-+	int err, pci_using_dac;
- 	u16 eeprom_data = 0;
- 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
- 	int bars; 
-@@ -984,11 +984,8 @@ err_eeprom:
- 		iegbe_phy_hw_reset(hw);
- 	if (hw->flash_address)
- 		iounmap(hw->flash_address);
--	for (i = 0; i < adapter->num_rx_queues; i++)
--		dev_put(&adapter->polling_netdev[i]);
- 	kfree(adapter->tx_ring);
- 	kfree(adapter->rx_ring);
--	kfree(adapter->polling_netdev);
- err_sw_init:
- 	iounmap(hw->hw_addr);
- err_ioremap:
-@@ -1017,7 +1014,6 @@ iegbe_remove(struct pci_dev *pdev)
-     struct net_device *netdev = pci_get_drvdata(pdev);
-     struct iegbe_adapter *adapter = netdev_priv(netdev);
-     uint32_t manc;
--    int i;
- 
-     if(adapter->hw.mac_type >= iegbe_82540
-        && adapter->hw.mac_type != iegbe_icp_xxxx
-@@ -1030,15 +1026,11 @@ iegbe_remove(struct pci_dev *pdev)
-     }
- 
-     unregister_netdev(netdev);
--    for (i = 0x0; i < adapter->num_rx_queues; i++)
--		dev_put(&adapter->polling_netdev[i]);
--
-     if(!iegbe_check_phy_reset_block(&adapter->hw)) {
-         iegbe_phy_hw_reset(&adapter->hw);
-     }
-     kfree(adapter->tx_ring);
-     kfree(adapter->rx_ring);
--    kfree(adapter->polling_netdev);
- 
-     iounmap(adapter->hw.hw_addr);
-     pci_release_regions(pdev);
-@@ -1061,7 +1053,6 @@ iegbe_sw_init(struct iegbe_adapter *adap
-     struct iegbe_hw *hw = &adapter->hw;
-     struct net_device *netdev = adapter->netdev;
-     struct pci_dev *pdev = adapter->pdev;
--    int i;
- 
-     /* PCI config space info */
- 
-@@ -1111,11 +1102,6 @@ iegbe_sw_init(struct iegbe_adapter *adap
- 		return -ENOMEM;
- 	}
- 
--	for (i = 0; i < adapter->num_rx_queues; i++) {
--		adapter->polling_netdev[i].priv = adapter;
--		dev_hold(&adapter->polling_netdev[i]);
--		set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
--	}
- 	spin_lock_init(&adapter->tx_queue_lock);
- 
-         /*
-@@ -1137,8 +1123,7 @@ iegbe_sw_init(struct iegbe_adapter *adap
-  * @adapter: board private structure to initialize
-  *
-  * We allocate one ring per queue at run-time since we don't know the
-- * number of queues at compile-time.  The polling_netdev array is
-- * intended for Multiqueue, but should work fine with a single queue.
-+ * number of queues at compile-time.
-  **/
- 
- static int __devinit
-@@ -1158,15 +1143,6 @@ iegbe_alloc_queues(struct iegbe_adapter
- 		return -ENOMEM;
- 	}
- 
--	adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
--	                                  sizeof(struct net_device),
--	                                  GFP_KERNEL);
--	if (!adapter->polling_netdev) {
--		kfree(adapter->tx_ring);
--		kfree(adapter->rx_ring);
--		return -ENOMEM;
--	}
--
-     return E1000_SUCCESS;
- }
- 

package/kernel/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch

@@ -1,60 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -2161,7 +2161,8 @@ static void iegbe_set_rx_mode(struct net
- {
- 	struct iegbe_adapter *adapter = netdev_priv(netdev);
- 	struct iegbe_hw *hw = &adapter->hw;
--	struct dev_addr_list *uc_ptr;
-+	struct netdev_hw_addr *ha;
-+	bool use_uc = false;
- 	struct dev_addr_list *mc_ptr;
- 	u32 rctl;
- 	u32 hash_value;
-@@ -2187,12 +2188,11 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 		}
- 	}
- 
--	uc_ptr = NULL;
- 	if (netdev->uc_count > rar_entries - 1) {
- 		rctl |= E1000_RCTL_UPE;
- 	} else if (!(netdev->flags & IFF_PROMISC)) {
- 		rctl &= ~E1000_RCTL_UPE;
--		uc_ptr = netdev->uc_list;
-+		use_uc = true;
- 	}
- 
- 	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
-@@ -2210,13 +2210,20 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 	 * if there are not 14 addresses, go ahead and clear the filters
- 	 * -- with 82571 controllers only 0-13 entries are filled here
- 	 */
-+	i = 1;
-+	if (use_uc)
-+		list_for_each_entry(ha, &netdev->uc_list, list) {
-+			if (i == rar_entries)
-+				break;
-+			iegbe_rar_set(hw, ha->addr, i++);
-+		}
-+
-+	WARN_ON(i == rar_entries);
-+
- 	mc_ptr = netdev->mc_list;
- 
--	for (i = 1; i < rar_entries; i++) {
--		if (uc_ptr) {
--			iegbe_rar_set(hw, uc_ptr->da_addr, i);
--			uc_ptr = uc_ptr->next;
--		} else if (mc_ptr) {		
-+	for (; i < rar_entries; i++) {
-+		if (mc_ptr) {
- 			iegbe_rar_set(hw, mc_ptr->da_addr, i);
- 			mc_ptr = mc_ptr->next;
- 		} else {
-@@ -2226,7 +2233,6 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 			E1000_WRITE_FLUSH(&adapter->hw);
- 		}
- 	}
--	WARN_ON(uc_ptr != NULL);
- 
- 	/* clear the old settings from the multicast hash table */
- 

package/kernel/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch

@@ -1,20 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -2188,7 +2188,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 		}
- 	}
- 
--	if (netdev->uc_count > rar_entries - 1) {
-+	if (netdev->uc.count > rar_entries - 1) {
- 		rctl |= E1000_RCTL_UPE;
- 	} else if (!(netdev->flags & IFF_PROMISC)) {
- 		rctl &= ~E1000_RCTL_UPE;
-@@ -2212,7 +2212,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 	 */
- 	i = 1;
- 	if (use_uc)
--		list_for_each_entry(ha, &netdev->uc_list, list) {
-+		list_for_each_entry(ha, &netdev->uc.list, list) {
- 			if (i == rar_entries)
- 				break;
- 			iegbe_rar_set(hw, ha->addr, i++);

package/kernel/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch

@@ -1,20 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -775,13 +775,13 @@ static int __devinit iegbe_probe(struct
- 	if (err)
-         return err;
- 
--	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
--	    !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
-+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
-+	    !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
- 		pci_using_dac = 1;
-         } else {
--             err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-+             err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-    	     if (err) {
--			err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
-+			err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- 			if (err) {
- 				E1000_ERR("No usable DMA configuration, "
- 					  "aborting\n");

package/kernel/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch

@@ -1,12 +0,0 @@
---- a/Embedded/src/GbE/iegbe_ethtool.c
-+++ b/Embedded/src/GbE/iegbe_ethtool.c
-@@ -944,7 +944,8 @@ iegbe_intr_test(struct iegbe_adapter *ad
-     *data = 0;
- 
-     /* Hook up test interrupt handler just for this test */
--     if(!request_irq(irq, &iegbe_test_intr, 0, netdev->name, netdev)) {
-+     if(!request_irq(irq, &iegbe_test_intr, IRQF_PROBE_SHARED, netdev->name,
-+			netdev)) {
-          shared_int = FALSE;
-      } else if(request_irq(irq, &iegbe_test_intr, IRQF_SHARED,
-                   netdev->name, netdev)){

package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch

@@ -1,747 +0,0 @@
---- a/Embedded/src/GbE/iegbe_oem_phy.c
-+++ b/Embedded/src/GbE/iegbe_oem_phy.c
-@@ -65,6 +65,10 @@ static int32_t iegbe_oem_link_m88_setup(
- static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw);
- static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw);
- 
-+static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw);
-+static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data);
-+static int32_t oi_phy_setup (struct iegbe_hw *hw);
-+
- /**
-  * iegbe_oem_setup_link
-  * @hw: iegbe_hw struct containing device specific information
-@@ -114,6 +118,10 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
-     }
- 
-     switch (hw->phy_id) {
-+	case BCM5395S_PHY_ID:
-+		return E1000_SUCCESS;
-+		break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_link_m88_setup(hw);
-@@ -121,6 +129,12 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
-                 return ret_val; 
-             }
-         break; 
-+	case BCM5481_PHY_ID:
-+		ret_val = iegbe_oem_link_bcm5481_setup(hw);
-+		if(ret_val) { 
-+			return ret_val; 
-+		}
-+		break; 
-         default:
-             DEBUGOUT("Invalid PHY ID\n");
-             return -E1000_ERR_PHY_TYPE;
-@@ -179,6 +193,51 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
- #endif /* ifdef EXTERNAL_MDIO */
- }
- 
-+/**
-+ * iegbe_oem_link_bcm5481_setup
-+ * @hw: iegbe_hw struct containing device specific information
-+ *
-+ * Returns E1000_SUCCESS, negative E1000 error code on failure
-+ *
-+ * copied verbatim from iegbe_oem_link_m88_setup
-+ **/
-+static int32_t
-+iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw)
-+{
-+	int32_t ret_val;
-+	uint16_t phy_data;
-+
-+	//DEBUGFUNC(__func__);
-+
-+	if(!hw)
-+		return -1;
-+
-+	/* phy_reset_disable is set in iegbe_oem_set_phy_mode */
-+	if(hw->phy_reset_disable)
-+		return E1000_SUCCESS;
-+
-+	// Enable MDIX in extended control reg.
-+	ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data);
-+	if(ret_val)
-+	{
-+		DEBUGOUT("Unable to read BCM5481_ECTRL register\n");
-+		return ret_val;
-+	}
-+
-+	phy_data &= ~BCM5481_ECTRL_DISMDIX;
-+	ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data);
-+	if(ret_val)
-+	{
-+		DEBUGOUT("Unable to write BCM5481_ECTRL register\n");
-+		return ret_val;
-+	}
-+
-+	ret_val = oi_phy_setup (hw);
-+	if (ret_val)
-+		return ret_val;
-+
-+	return E1000_SUCCESS;
-+}
- 
- /**
-  * iegbe_oem_link_m88_setup
-@@ -340,6 +399,11 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
-      * see iegbe_phy_force_speed_duplex, which does the following for M88
-      */
-       switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n");
-+			break;
-+
-           case M88E1000_I_PHY_ID:
-           case M88E1141_E_PHY_ID:
-               ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-@@ -415,6 +479,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
-      switch (hw->phy_id) {
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-              DEBUGOUT("No DSP to reset on OEM PHY\n");
-          break;
-          default:
-@@ -460,6 +526,11 @@ iegbe_oem_cleanup_after_phy_reset(struct
-      * see iegbe_phy_force_speed_duplex, which does the following for M88
-      */
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+            DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n");
-+        break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             /*
-@@ -573,6 +644,11 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
-      * use iegbe_set_phy_mode as example
-      */
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+             DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n");
-+         break;
-+
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
-              ret_val = iegbe_read_eeprom(hw, 
-@@ -641,6 +717,19 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
-     }
-     hw->phy_type = iegbe_phy_oem;
- 
-+{
-+	// If MAC2 (BCM5395 switch), manually detect the phy
-+	struct iegbe_adapter *adapter;
-+	uint32_t device_number;
-+	adapter = (struct iegbe_adapter *) hw->back;
-+	device_number = PCI_SLOT(adapter->pdev->devfn);
-+	if (device_number == ICP_XXXX_MAC_2) {
-+		hw->phy_id = BCM5395S_PHY_ID;
-+		hw->phy_revision = 0;
-+		return E1000_SUCCESS;
-+	}
-+}
-+
-     ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high);
-     if(ret_val) {
-         DEBUGOUT("Unable to read PHY register PHY_ID1\n");
-@@ -690,6 +779,8 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
-     switch (hw->phy_id) {
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-              phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
-          break;
-          default:
-@@ -738,6 +829,8 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-             isCopper = TRUE;
-         break;
-         default:
-@@ -796,13 +889,13 @@ iegbe_oem_get_phy_dev_number(struct iegb
- 	switch(device_number)
-     {
-       case ICP_XXXX_MAC_0: 
--	      hw->phy_addr = 0x00;
-+	      hw->phy_addr = 0x01;
- 	  break;
-       case ICP_XXXX_MAC_1: 
--	      hw->phy_addr = 0x01;
-+	      hw->phy_addr = 0x02;
- 	  break;
-       case ICP_XXXX_MAC_2: 
--	      hw->phy_addr = 0x02;
-+	      hw->phy_addr = 0x00;
- 	  break;
- 	  default:  hw->phy_addr = 0x00;
-     }
-@@ -851,6 +944,12 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
-     if(!adapter || !ifr) {
-         return -1;
-     }
-+
-+	// If MAC2 (BCM5395 switch) then leave now
-+	if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) {
-+			return -1;
-+	}
-+
-     switch (data->reg_num) {
-         case PHY_CTRL:
-             if(mii_reg & MII_CR_POWER_DOWN) {
-@@ -987,6 +1086,11 @@ void iegbe_oem_get_phy_regs(struct iegbe
-      * [10] = mdix mode
-      */
-     switch (adapter->hw.phy_id) {
-+	case BCM5395S_PHY_ID:
-+	case BCM5481_PHY_ID:
-+		DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n");
-+	break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             if(corrected_len > 0) {
-@@ -1068,8 +1172,13 @@ iegbe_oem_phy_loopback(struct iegbe_adap
-      * Loopback configuration is the same for each of the supported PHYs.
-      */
-     switch (adapter->hw.phy_id) {
-+		case BCM5395S_PHY_ID:
-+			DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n");
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
- 
-           adapter->hw.autoneg = FALSE;
- 
-@@ -1182,8 +1291,14 @@ iegbe_oem_loopback_cleanup(struct iegbe_
-     }
- 
-     switch (adapter->hw.phy_id) {
-+		case BCM5395S_PHY_ID:
-+		DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n");
-+		return;
-+		break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-         default:
-             adapter->hw.autoneg = TRUE;
-         
-@@ -1243,6 +1358,11 @@ iegbe_oem_phy_speed_downgraded(struct ie
-      */
- 
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			*isDowngraded = 0;
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, 
-@@ -1305,6 +1425,11 @@ iegbe_oem_check_polarity(struct iegbe_hw
-      */
- 
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			*polarity = 0;
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             /* return the Polarity bit in the Status register. */
-@@ -1367,6 +1492,25 @@ iegbe_oem_phy_is_full_duplex(struct iegb
-      */
-         
-       switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+			/* Always full duplex */
-+			*isFD = 1;
-+			break;
-+
-+		case BCM5481_PHY_ID:
-+			ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-+			if(ret_val) return ret_val;
-+
-+				switch (BCM5481_ASTAT_HCD(phy_data)) {
-+					case BCM5481_ASTAT_1KBTFD:
-+					case BCM5481_ASTAT_100BTXFD:
-+						*isFD = 1;
-+						break;
-+					default:
-+						*isFD = 0;
-+				}
-+			break;
-+
-           case M88E1000_I_PHY_ID:
-           case M88E1141_E_PHY_ID:
-              ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
-@@ -1423,6 +1567,25 @@ iegbe_oem_phy_is_speed_1000(struct iegbe
-      */
- 
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+			/* Always 1000mb */
-+			*is1000 = 1;
-+			break;
-+
-+		case BCM5481_PHY_ID:
-+			ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-+			if(ret_val) return ret_val;
-+
-+				switch (BCM5481_ASTAT_HCD(phy_data)) {
-+					case BCM5481_ASTAT_1KBTFD:
-+					case BCM5481_ASTAT_1KBTHD:
-+						*is1000 = 1;
-+					break;
-+				default:
-+					*is1000 = 0;
-+				}
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, 
-@@ -1478,6 +1641,25 @@ iegbe_oem_phy_is_speed_100(struct iegbe_
-      * see iegbe_config_mac_to_phy
-      */
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+			/* Always 1000Mb, never 100mb */
-+			*is100 = 0;
-+			break;
-+
-+		case BCM5481_PHY_ID:
-+			ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
-+			if(ret_val) return ret_val;
-+
-+			switch (BCM5481_ASTAT_HCD(phy_data)) {
-+				case BCM5481_ASTAT_100BTXFD:
-+				case BCM5481_ASTAT_100BTXHD:
-+					*is100 = 1;
-+					break;
-+				default:
-+					*is100 = 0;
-+			}
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-@@ -1535,6 +1717,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
-      * see iegbe_phy_m88_get_info
-      */
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n");
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-   /* The downshift status is checked only once, after link is
-@@ -1636,8 +1823,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
-      * the M88 used in truxton. 
-      */
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+			DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n");
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data);
-             if(ret_val) {
-                 DEBUGOUT("Unable to read register PHY_CTRL\n");
-@@ -1699,6 +1891,8 @@ iegbe_oem_phy_init_script(struct iegbe_h
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-             DEBUGOUT("Nothing to do for OEM PHY Init");
-         break;
-         default:
-@@ -1735,6 +1929,11 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
-         return -1;
-     }
- 
-+	if (hw->phy_id == BCM5395S_PHY_ID) {
-+		DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n");
-+		return -1;
-+	}
-+
-     /* call the GCU func that will read the phy
-      * 
-      * Make note that the M88 phy is what'll be used on Truxton.
-@@ -1782,6 +1981,11 @@ iegbe_oem_set_trans_gasket(struct iegbe_
-     }
- 
-      switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n");
-+			break;
-+
-          case M88E1000_I_PHY_ID:
-          case M88E1141_E_PHY_ID:
-          /* Gasket set correctly for Marvell Phys, so nothing to do */
-@@ -1886,6 +2090,8 @@ iegbe_oem_phy_needs_reset_with_mac(struc
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-             ret_val = FALSE;
-         break;
-         default:
-@@ -1935,6 +2141,8 @@ iegbe_oem_config_dsp_after_link_change(s
-     switch (hw->phy_id) {
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-+		case BCM5481_PHY_ID:
-+		case BCM5395S_PHY_ID:
-             DEBUGOUT("No DSP to configure on OEM PHY");
-         break;
-         default:
-@@ -1978,6 +2186,12 @@ iegbe_oem_get_cable_length(struct iegbe_
-     }
- 
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+		case BCM5481_PHY_ID:
-+			*min_length = 0;
-+			*max_length = iegbe_igp_cable_length_150;
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             ret_val = iegbe_oem_read_phy_reg_ex(hw, 
-@@ -2061,6 +2275,23 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
-      */
- 
-     switch (hw->phy_id) {
-+		case BCM5395S_PHY_ID:
-+			/* Link always up */
-+			*isUp = TRUE;
-+			return E1000_SUCCESS;
-+			break;
-+
-+		case BCM5481_PHY_ID:
-+			iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
-+			ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
-+			if(ret_val)
-+			{
-+				DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n");
-+				return ret_val;
-+			}
-+			statusMask = BCM5481_ESTAT_LINK;
-+			break;
-+
-         case M88E1000_I_PHY_ID:
-         case M88E1141_E_PHY_ID:
-             iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); 
-@@ -2092,3 +2323,210 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
- #endif /* ifdef EXTERNAL_MDIO */
- }
- 
-+
-+
-+//-----
-+// Read BCM5481 expansion register
-+//
-+int32_t
-+bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data)
-+{
-+	int ret;
-+	uint16_t selector;
-+	uint16_t reg_data;
-+
-+	// Get the current value of bits 15:12
-+	ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector);
-+	if (ret)
-+		return ret;
-+
-+	// Select the expansion register
-+	selector &= 0xf000;
-+	selector |= (0xf << 8) | (reg);
-+	iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
-+
-+	// Read the expansion register
-+	ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &reg_data);
-+
-+	// De-select the expansion registers.
-+	selector &= 0xf000;
-+	iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
-+
-+	if (ret)
-+		return ret;
-+
-+	*data = reg_data;
-+	return ret;
-+}
-+
-+//-----
-+//	Read reg 0x18 sub-register
-+//
-+static int32_t
-+bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data)
-+{
-+	int	ret;
-+	uint16_t	tmp_data;
-+
-+	// Select reg 0x18, sv
-+	tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL;
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data);
-+	if(ret)
-+		return ret;
-+
-+	// Read reg 0x18, sv
-+	ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data);
-+	if(ret)
-+		return ret;
-+
-+	*data = tmp_data;
-+	return ret;
-+}
-+
-+//-----
-+//	Read reg 0x1C sub-register
-+//
-+int32_t
-+bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data)
-+{
-+	int ret;
-+	uint16_t tmp_data;
-+
-+	// Select reg 0x1c, sv
-+	tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT);
-+
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data);
-+	if(ret)
-+		return ret;
-+
-+	// Read reg 0x1c, sv
-+	ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data);
-+	if(ret)
-+		return ret;
-+
-+	*data = tmp_data;
-+	return ret;
-+}
-+
-+//-----
-+//	Read-modify-write a 0x1C register.
-+//
-+//	hw   - hardware access info.
-+//	reg  - 0x1C register to modify.
-+//	data - bits which should be set.
-+//	mask - the '1' bits in this argument will be cleared in the data
-+//         read from 'reg' then 'data' will be or'd in and the result
-+//         will be written to 'reg'.
-+
-+int32_t
-+bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask)
-+{
-+	int32_t		ret;
-+	uint16_t	reg_data;
-+
-+	ret = 0;
-+
-+	ret = bcm5481_read_1csv (hw, reg, &reg_data);
-+	if (ret)
-+	{
-+		DEBUGOUT("Unable to read BCM5481 1CH register\n");
-+		printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg);
-+		return ret;
-+	}
-+
-+	reg_data &= ~mask;
-+	reg_data |= (BCM5481_R1CH_WE | data);
-+
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data);
-+	if(ret)
-+	{
-+		DEBUGOUT("Unable to write BCM5481 1CH register\n");
-+		printk (KERN_ERR "Unable to write BCM5481 1CH register\n");
-+		return ret;
-+	}
-+
-+	return ret;
-+}
-+
-+int32_t
-+oi_phy_setup (struct iegbe_hw *hw)
-+{
-+	int	ret;
-+	uint16_t	pmii_data;
-+	uint16_t	mctrl_data;
-+	uint16_t	cacr_data;
-+
-+	ret = 0;
-+
-+	// Set low power mode via reg 0x18, sv010, bit 6
-+	// Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits.
-+	ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data);
-+	if (ret)
-+	{
-+		DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n");
-+		printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n");
-+		return ret;
-+	}
-+
-+	// Set the LPM bit in the data just read and write back to sv010
-+	// The shadow register select bits [2:0] are set by reading the sv010
-+	// register.
-+	pmii_data |= BCM5481_R18H_SV010_LPM;
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data);
-+	if(ret)
-+	{
-+		DEBUGOUT("Unable to write BCM5481_R18H register\n");
-+		printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
-+		return ret;
-+	}
-+
-+
-+	// Set the RGMII RXD to RXC skew bit in reg 0x18, sv111
-+
-+	if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data))
-+	{
-+		DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n");
-+		printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n");
-+		return ret;
-+	}
-+	mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW);
-+
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data);
-+	if(ret)
-+	{
-+		DEBUGOUT("Unable to write BCM5481_R18H register\n");
-+		printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
-+		return ret;
-+	}
-+
-+	// Enable RGMII transmit clock delay in reg 0x1c, sv00011
-+	ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data);
-+	if (ret)
-+	{
-+		DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n");
-+		printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n");
-+		return ret;
-+	}
-+
-+	cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD);
-+
-+	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data);
-+	if(ret)
-+	{
-+		DEBUGOUT("Unable to write BCM5481_R1CH register\n");
-+		printk (KERN_ERR "Unable to write BCM5481_R1CH register\n");
-+		return ret;
-+	}
-+
-+	// Enable dual link speed indication (0x1c, sv 00010, bit 2)
-+	ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK);
-+	if (ret)
-+		return ret;
-+
-+	// Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0)
-+	ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN);
-+	if (ret)
-+		return ret;
-+
-+	return ret;
-+}
---- a/Embedded/src/GbE/iegbe_oem_phy.h
-+++ b/Embedded/src/GbE/iegbe_oem_phy.h
-@@ -95,6 +95,8 @@ int32_t iegbe_oem_phy_is_link_up(struct
- 
- #define DEFAULT_ICP_XXXX_TIPG_IPGT 8      /* Inter Packet Gap Transmit Time */
- #define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL 
-+#define BCM5481_PHY_ID		0x0143BCA0
-+#define BCM5395S_PHY_ID		0x0143BCF0
- 
- /* Miscellaneous defines */
- #ifdef IEGBE_10_100_ONLY
-@@ -103,5 +105,65 @@ int32_t iegbe_oem_phy_is_link_up(struct
-     #define ICP_XXXX_AUTONEG_ADV_DEFAULT	0x2F
- #endif
- 
-+/* BCM5481 specifics */
-+
-+#define BCM5481_ECTRL		(0x10)
-+#define BCM5481_ESTAT		(0x11)
-+#define BCM5481_RXERR		(0x12)
-+#define BCM5481_EXPRW		(0x15)
-+#define BCM5481_EXPACC		(0x17)
-+#define BCM5481_ASTAT		(0x19)
-+#define BCM5481_R18H		(0x18)
-+#define BCM5481_R1CH		(0x1c)
-+
-+/* indirect register access via register 18h */
-+
-+#define BCM5481_R18H_SV_MASK	(7) // Mask for SV bits.
-+#define BCM5481_R18H_SV_ACTRL	(0) // SV000 Aux. control
-+#define BCM5481_R18H_SV_10BT	(1) // SV001 10Base-T
-+#define BCM5481_R18H_SV_PMII	(2) // SV010 Power/MII control
-+#define BCM5481_R18H_SV_MTEST	(4) // SV100 Misc. test
-+#define BCM5481_R18H_SV_MCTRL	(7) // SV111 Misc. control
-+
-+#define BCM5481_R18H_SV001_POL	(1 << 13) // Polarity
-+#define BCM5481_R18H_SV010_LPM	(1 << 6)
-+#define BCM5481_R18H_SV111_SKEW	(1 << 8)
-+#define BCM5481_R18H_WE		(1 << 15) // Write enable
-+
-+// 0x1c registers
-+#define BCM5481_R1CH_SV_SHIFT	(10)
-+#define BCM5481_R1CH_SV_MASK	(0x1f)
-+#define BCM5481_R1CH_SC1	(0x02) // sv00010 Spare control 1
-+#define BCM5481_R1CH_CACR	(0x03) // sv00011 Clock alignment control
-+#define BCM5481_R1CH_LCTRL	(0x09) // sv01001 LED control
-+#define BCM5481_R1CH_LEDS1	(0x0d) // sv01101 LED selector 1
-+
-+// 0x1c common
-+#define BCM5481_R1CH_WE		(1 << 15) // Write enable
-+
-+// 0x1c, sv 00010
-+#define BCM5481_R1CH_SC1_LINK	(1 << 2) // sv00010 Linkspeed
-+
-+// 0x1c, sv 00011
-+#define BCM5481_R1CH_CACR_TCD	(1 << 9) // sv00011 RGMII tx clock delay
-+
-+// 0x1c, sv 01001
-+#define BCM5481_R1CH_LCTRL_ALEN	(1 << 4) // Activity/Link enable on ACTIVITY LED
-+#define BCM5481_R1CH_LCTRL_AEN	(1 << 3) // Activity enable on ACTIVITY LED
-+
-+#define BCM5481_ECTRL_DISMDIX	(1 <<14)
-+
-+#define BCM5481_MCTRL_AUTOMDIX	(1 <<9)
-+
-+#define BCM5481_ESTAT_LINK	(1 << 8)
-+
-+#define BCM5481_ASTAT_ANC	(1 << 15)
-+#define BCM5481_ASTAT_ANHCD	(7 << 8)
-+#define BCM5481_ASTAT_HCD(x)	((x >> 8) & 7)
-+#define BCM5481_ASTAT_1KBTFD	(0x7)
-+#define BCM5481_ASTAT_1KBTHD	(0x6)
-+#define BCM5481_ASTAT_100BTXFD	(0x5)
-+#define BCM5481_ASTAT_100BTXHD	(0x3)
-+
- #endif /* ifndef _IEGBE_OEM_PHY_H_ */
-  

package/kernel/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch

@@ -1,11 +0,0 @@
---- a/Embedded/src/CAN/icp_can_user.h
-+++ b/Embedded/src/CAN/icp_can_user.h
-@@ -63,6 +63,8 @@
- #ifndef __ICP_CAN_USER_H__
- #define __ICP_CAN_USER_H__
- 
-+#include <linux/ioctl.h>
-+
- /*****************************************************************************
-  * Device IO control codes.
-  *****************************************************************************/

package/kernel/ep80579-drivers/patches/210-can_include_linux_fs_h.patch

@@ -1,11 +0,0 @@
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -70,6 +70,8 @@
- 
- #include "can_main.h"
- #include "can_ioctl.h"
-+#include <linux/fs.h>
-+
- 
- MODULE_AUTHOR("Intel(R) Corporation");
- MODULE_DESCRIPTION("Controller Area Network Driver");

package/kernel/ep80579-drivers/patches/220-can_fix_irq_request.patch

@@ -1,23 +0,0 @@
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -654,7 +654,7 @@ int can_dev_io(struct inode *inode, stru
- /*****************************************************************************
-  * Interrupt handler.
-  *****************************************************************************/
--irqreturn_t can_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
-+irqreturn_t can_irq_handler(int irq, void *dev_id)
- {
-     can_os_t *can_os = (can_os_t *) dev_id;
-     unsigned int int_status;
---- a/Embedded/src/CAN/can_main.h
-+++ b/Embedded/src/CAN/can_main.h
-@@ -165,8 +165,7 @@ int can_dev_io(
- 
- irqreturn_t can_irq_handler(
-     int irq, 
--    void *dev_id, 
--    struct pt_regs *regs);
-+    void *dev_id);
- 
- void can_tasklet(
-     unsigned long arg

package/kernel/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch

@@ -1,40 +0,0 @@
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -214,8 +214,8 @@ int can_pci_probe(struct pci_dev *dev, c
-     spin_lock_init(&(g_can_os[can_num].int_spinlock));
-     spin_lock_init(&(g_can_os[can_num].open_spinlock));
- 
--    dev->dev.driver_data = (void *) &(g_can_os[can_num]);
--    if (!dev->dev.driver_data)
-+    dev_set_drvdata(&dev->dev, (void *) &(g_can_os[can_num]));
-+    if (!dev_get_drvdata(&dev->dev))
-     {
-         printk("Couldn't create CAN device %d. Exiting.\n",
-             dev->device);
-@@ -237,7 +237,7 @@ int can_pci_probe(struct pci_dev *dev, c
-  *****************************************************************************/
- void can_pci_remove(struct pci_dev *dev)
- {
--    can_os_t *can_os = dev->dev.driver_data;
-+    can_os_t *can_os = dev_get_drvdata(&dev->dev);
- 
-     iounmap(can_os->pci_remap);
-     icp_can_destroy(can_os->can);
-@@ -251,7 +251,7 @@ int can_pci_suspend(struct pci_dev *dev,
- {
-     unsigned int i;
-     unsigned int int_status;
--    can_os_t *can_os = dev->dev.driver_data;
-+    can_os_t *can_os = dev_get_drvdata(&dev->dev);
-     int err;
- 
- 	/* Indicate that we are suspending */
-@@ -322,7 +322,7 @@ int can_pci_suspend(struct pci_dev *dev,
- int can_pci_resume(struct pci_dev *dev)
- {
-     unsigned int i;
--    can_os_t *can_os = dev->dev.driver_data;
-+    can_os_t *can_os = dev_get_drvdata(&dev->dev);
- 
- 	/* Restore PCI CFG space */
- 	pci_restore_state(dev);

package/kernel/ep80579-drivers/patches/300-wdt_compile_fix.patch

@@ -1,59 +0,0 @@
---- a/Embedded/src/WDT/iwdt.c
-+++ b/Embedded/src/WDT/iwdt.c
-@@ -180,19 +180,19 @@ MODULE_PARM_DESC(wdt_scale, "Intel WDT s
- module_param(wdt_intr_type, byte, WDT_INT_TYPE_IRQ);
- MODULE_PARM_DESC(wdt_intr_type, "Intel WDT interrupt type (default SERIRQ).");
- 
--module_param(wdt_margin1, uint, TIMER_MARGIN);
-+module_param(wdt_margin1, uint, 0);
- MODULE_PARM_DESC(wdt_margin1, "First stage Intel WDT timeout in steps of 1 ms by default.");
- 
--module_param(wdt_margin2, uint, TIMER_MARGIN);
-+module_param(wdt_margin2, uint, 0);
- MODULE_PARM_DESC(wdt_margin2, "Second stage Intel WDT timeout in steps of 1 ms by default.");
- 
- module_param(nowayout, int, 0);
- MODULE_PARM_DESC(nowayout, "Intel WDT can't be stopped once started (default=0)");
- 
--module_param(wdt_index_port, int, 0x4E);
-+module_param(wdt_index_port, int, 0);
- MODULE_PARM_DESC(wdt_index_port, "WDT Index Port (default 0x4e)");
- 
--module_param(wdt_data_port, int, 0x4E);
-+module_param(wdt_data_port, int, 0);
- MODULE_PARM_DESC(wdt_data_port, "WDT Data Port (default 0x4f)");
- 
- static int wdt_get_iobase(struct pci_dev *dev, u16 *iobase, int *irq);
-@@ -218,7 +218,7 @@ static ssize_t wdt_write(struct file *fi
-                      size_t count, loff_t * pos);
- static int wdt_ioctl(struct inode *inode, struct file *file,
-                     unsigned int cmd, unsigned long arg);
--static irqreturn_t wdt_isr(int irq, void *dev_id, struct pt_regs *regs);
-+static irqreturn_t wdt_isr(int irq, void *dev_id);
- static void __exit wdt_cleanup(void);
- static int __init wdt_init(void);
- static int __init wdt_init_one(struct pci_dev *dev,
-@@ -255,7 +255,7 @@ static struct pci_driver wdt_driver = {
-      name:        "iwdt",
-      id_table:     lpc_pci_tbl,
-      probe:        wdt_init_one,
--     remove:        __devexit(wdt_remove_one),
-+     remove:        __devexit_p(wdt_remove_one),
-      suspend:      wdt_pci_suspend,
-      resume:       wdt_pci_resume,
- };
-@@ -1393,12 +1393,12 @@ static int wdt_ioctl(struct inode *inode
- 
- /*
-  * Function Name:   wdt_isr()
-- * Parameter:    int irq - irq number, void *dev_id, struct pt_regs *regs
-+ * Parameter:    int irq - irq number, void *dev_id
-  * Return Value::   IRQ_NONE -  if the interrupt is not for wdt.
-  *           IRQ_HANDLED - if it is for wdt.
-  * Description:     This is the interrupt service routine of the WDT.
-  */
--static irqreturn_t wdt_isr(int irq, void *dev_id, struct pt_regs *regs)
-+static irqreturn_t wdt_isr(int irq, void *dev_id)
- {
-      u8 val;
- 

package/kernel/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch

@@ -1,22 +0,0 @@
---- a/Embedded/src/EDMA/dma_linux.c
-+++ b/Embedded/src/EDMA/dma_linux.c
-@@ -149,8 +149,7 @@ int32_t edma_suspend (struct pci_dev *de
- int32_t edma_resume(struct pci_dev *dev);
- int32_t initialize_edma_device(struct edma_device *device);
- 
--static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id,
--                                    struct pt_regs * regs);
-+static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id);
- 
- /* Prototypes - Misc. */
- 
-@@ -429,8 +428,7 @@ int32_t edma_release(struct inode * inod
-  * Return Values: HANDLED = 1, NOT_HANDLED = 0
-  *****************************************************************************/
- 
--static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id,
--                                    struct pt_regs * regs)
-+static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id)
- {
- 
-     uint32_t clear_bits;

package/kernel/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch

@@ -1,22 +0,0 @@
---- a/Embedded/src/1588/1588.c
-+++ b/Embedded/src/1588/1588.c
-@@ -631,7 +631,7 @@ int restore_interrupts(void)
-       IRQ_NONE => this device did not interrupt
- 
- ******************************************************************************/
--irqreturn_t timesync_isr(int irq, void *dev_id, struct pt_regs *regs)
-+irqreturn_t timesync_isr(int irq, void *dev_id)
- {
-     if ( !ixTimeSyncAccEventAmmsFlagGet() && !ixTimeSyncAccEventAsmsFlagGet()&&
-        !ixTimeSyncAccEventAtmFlagGet() && !ixTimeSyncAccEventPpsmFlagGet()&&
---- a/Embedded/src/1588/1588.h
-+++ b/Embedded/src/1588/1588.h
-@@ -128,7 +128,7 @@ int pci_suspend(struct pci_dev *dev, pm_
- int pci_resume(struct pci_dev *dev);
- int pci_probe(struct pci_dev *dev, const struct pci_device_id *id);
- void pci_remove(struct pci_dev *dev);
--irqreturn_t timesync_isr(int irq, void *dev_id, struct pt_regs *regs);
-+irqreturn_t timesync_isr(int irq, void *dev_id);
- 
- // private functions
- int save_reg_state(void);

package/kernel/ep80579-drivers/patches/600-2.6.27_includes.patch

@@ -1,22 +0,0 @@
---- a/Embedded/src/CAN/can_main.h
-+++ b/Embedded/src/CAN/can_main.h
-@@ -65,7 +65,7 @@
- 
- #include <linux/interrupt.h>
- #include <linux/pci.h>
--#include <asm/semaphore.h>
-+#include <linux/semaphore.h>
- #include <linux/spinlock.h>
- #include <linux/cdev.h>
- #include <asm/uaccess.h>
---- a/Embedded/src/EDMA/dma_linux.c
-+++ b/Embedded/src/EDMA/dma_linux.c
-@@ -87,7 +87,7 @@
- #include <linux/fcntl.h>   /* O_ACCMODE */
- #include <asm/system.h>    /* cli, *_flags */
- #include <asm/uaccess.h>   /* copy_to_user */
--#include <asm/semaphore.h>
-+#include <linux/semaphore.h>
- #include <asm/io.h>        /* inb(), outb() */
- #include <linux/kmod.h>
- #include <linux/ioport.h>  /* request_region */

package/kernel/ep80579-drivers/patches/601-2.6.32_includes.patch

@@ -1,30 +0,0 @@
---- a/Embedded/src/1588/1588.c
-+++ b/Embedded/src/1588/1588.c
-@@ -72,6 +72,7 @@
-  *
-  ****************************************************************************/
- 
-+#include <linux/sched.h>
- #include "1588.h"
- 
- MODULE_AUTHOR("Intel(R) Corporation");
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -68,6 +68,7 @@
-  *
-  **************************************************************************/
- 
-+#include <linux/sched.h>
- #include "can_main.h"
- #include "can_ioctl.h"
- #include <linux/fs.h>
---- a/Embedded/src/WDT/iwdt.c
-+++ b/Embedded/src/WDT/iwdt.c
-@@ -137,6 +137,7 @@
- #include <linux/watchdog.h>
- #include <linux/miscdevice.h>
- #include <linux/interrupt.h>
-+#include <linux/sched.h>
- #include "iwdt.h"
- 
- MODULE_AUTHOR("Intel(R) Corporation");

package/kernel/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch

@@ -1,31 +0,0 @@
---- a/Embedded/src/GbE/kcompat.h
-+++ b/Embedded/src/GbE/kcompat.h
-@@ -46,12 +46,6 @@ GPL LICENSE SUMMARY
- #include <linux/sched.h>
- #include <asm/io.h>
- 
--#ifndef IRQ_HANDLED
--#define irqreturn_t void
--#define IRQ_HANDLED
--#define IRQ_NONE
--#endif
--
- #ifndef SET_NETDEV_DEV
- #define SET_NETDEV_DEV(net, pdev)
- #endif
-@@ -748,6 +742,15 @@ extern void dump_stack(void);
- 
- #endif /* 2.4.24 */
- 
-+/*****************************************************************************/
-+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) )
-+#ifndef IRQ_HANDLED
-+#define irqreturn_t void
-+#define IRQ_HANDLED
-+#define IRQ_NONE
-+#endif
-+#endif /* < 2.6.30 */
-+
- #endif /* _KCOMPAT_H_ */
- 
-  

package/kernel/ep80579-drivers/patches/701-iegbe_poll_dev.patch

@@ -1,11 +0,0 @@
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -3534,7 +3534,7 @@ static int iegbe_clean(struct napi_struc
- 	int tx_cleaned = 0, work_done = 0;
- 
- 	/* Must NOT use netdev_priv macro here. */
--	adapter = poll_dev->priv;
-+	adapter = netdev_priv(poll_dev);
- 
- 	/* iegbe_clean is called per-cpu.  This lock protects
- 	 * tx_ring[0] from being cleaned by multiple cpus

package/kernel/ep80579-drivers/patches/710-3.3-fix-generated-header-locations.patch

@@ -1,91 +0,0 @@
---- a/Embedded/src/GbE/Makefile
-+++ b/Embedded/src/GbE/Makefile
-@@ -60,19 +60,19 @@ GBE_NAME = iegbe
- GCU_NAME = gcu
- 
- VERSION_FILE := $(KSRC)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KSRC)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KSRC)/include/generated/autoconf.h
- 
- ifeq (,$(wildcard $(VERSION_FILE)))
-   $(error Linux kernel source not configured - missing version.h)
- endif
- 
- ifeq (,$(wildcard $(CONFIG_FILE)))
--  $(error Linux kernel source not configured - missing autoconf.h)
-+    $(error Linux kernel source not configured - missing autoconf.h)
- endif
- 
- ifeq (,$(wildcard $(UTS_REL_FILE)))
--  $(error Linux kernel source not configured - missing utsrelease.h)
-+    $(error Linux kernel source not configured - missing utsrelease.h)
- endif
- 
- # set the install path
---- a/Embedded/src/1588/Makefile
-+++ b/Embedded/src/1588/Makefile
-@@ -97,8 +97,8 @@ OUTPUT_PATH ?= /
- EXTRA_LDFLAGS += -whole-archive
- 
- VERSION_FILE := $(KOBJ)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
- 
-  
- # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
---- a/Embedded/src/CAN/Makefile
-+++ b/Embedded/src/CAN/Makefile
-@@ -100,8 +100,8 @@ OUTPUT_PATH ?= /
- EXTRA_LDFLAGS += -whole-archive
- 
- VERSION_FILE := $(KOBJ)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
- 
-  
- # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
---- a/Embedded/src/EDMA/Makefile
-+++ b/Embedded/src/EDMA/Makefile
-@@ -114,8 +114,8 @@ OUTPUT_PATH ?= /
- EXTRA_LDFLAGS += -whole-archive
- 
- VERSION_FILE := $(KOBJ)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
- 
-  
- # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
---- a/Embedded/src/GPIO/Makefile
-+++ b/Embedded/src/GPIO/Makefile
-@@ -97,8 +97,8 @@ OUTPUT_PATH ?= /
- EXTRA_LDFLAGS += -whole-archive
- 
- VERSION_FILE := $(KOBJ)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
- 
-  
- # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
---- a/Embedded/src/WDT/Makefile
-+++ b/Embedded/src/WDT/Makefile
-@@ -99,8 +99,8 @@ OUTPUT_PATH ?= /
- EXTRA_LDFLAGS += -whole-archive
- 
- VERSION_FILE := $(KOBJ)/include/linux/version.h
--UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
--CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
-+UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
-+CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
- 
-  
- # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h

package/kernel/ep80579-drivers/patches/711-3.3-gbe-fixes.patch

@@ -1,392 +0,0 @@
---- a/Embedded/src/GbE/kcompat.h
-+++ b/Embedded/src/GbE/kcompat.h
-@@ -590,6 +590,10 @@ static inline void _kc_synchronize_irq()
- #define ETHTOOL_OPS_COMPAT
- #endif
- 
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0))
-+#define HAVE_NETIF_MSG 1
-+#endif
-+
- #ifndef HAVE_NETIF_MSG
- #define HAVE_NETIF_MSG 1
- enum {
---- a/Embedded/src/GbE/iegbe_main.c
-+++ b/Embedded/src/GbE/iegbe_main.c
-@@ -159,9 +159,9 @@ static void iegbe_smartspeed(struct iegb
- static inline int iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter,
-                           struct sk_buff *skb);
- 
--static void iegbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
--static void iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
--static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
-+static bool iegbe_vlan_used(struct iegbe_adapter *adapter);
-+static int iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
-+static int iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
- static void iegbe_restore_vlan(struct iegbe_adapter *adapter);
- 
- static int iegbe_notify_reboot(struct notifier_block *,
-@@ -324,8 +324,8 @@ static void iegbe_update_mng_vlan(struct
-         struct net_device *netdev = adapter->netdev;
- 	u16 vid = hw->mng_cookie.vlan_id;
-         u16 old_vid = adapter->mng_vlan_id;
--        if (adapter->vlgrp) {
--                if (!vlan_group_get_device(adapter->vlgrp, vid)) {
-+        if (iegbe_vlan_used(adapter)) {
-+                if (!test_bit(old_vid, adapter->active_vlans)) {
- 			if (hw->mng_cookie.status &
-                                 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
-                                 iegbe_vlan_rx_add_vid(netdev, vid);
-@@ -335,7 +335,7 @@ static void iegbe_update_mng_vlan(struct
- 
-                         if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
-                                         (vid != old_vid) &&
--                            !vlan_group_get_device(adapter->vlgrp, old_vid))
-+                            !test_bit(old_vid, adapter->active_vlans))
-                                 iegbe_vlan_rx_kill_vid(netdev, old_vid);
-                 } else
-                         adapter->mng_vlan_id = vid;
-@@ -736,7 +736,6 @@ static const struct net_device_ops iegbe
- 	.ndo_do_ioctl		= iegbe_ioctl,
- 	.ndo_validate_addr	= eth_validate_addr,
- 
--	.ndo_vlan_rx_register	= iegbe_vlan_rx_register,
- 	.ndo_vlan_rx_add_vid	= iegbe_vlan_rx_add_vid,
- 	.ndo_vlan_rx_kill_vid	= iegbe_vlan_rx_kill_vid,
- #ifdef CONFIG_NET_POLL_CONTROLLER
-@@ -767,7 +766,6 @@ static int __devinit iegbe_probe(struct
- 	u16 eeprom_data = 0;
- 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
- 	int bars; 
--	DECLARE_MAC_BUF(mac);
- 
- 	bars = pci_select_bars(pdev, IORESOURCE_MEM);
- 	err = pci_enable_device(pdev);
-@@ -1247,8 +1245,7 @@ static int iegbe_close(struct net_device
- 
- 	if ((hw->mng_cookie.status &
- 			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
--	     !(adapter->vlgrp &&
--	       vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
-+	     !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) {
- 		iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
- 	}
- 	return 0;
-@@ -2163,11 +2160,13 @@ static void iegbe_set_rx_mode(struct net
- 	struct iegbe_hw *hw = &adapter->hw;
- 	struct netdev_hw_addr *ha;
- 	bool use_uc = false;
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- 	struct dev_addr_list *mc_ptr;
--	u32 rctl;
- 	u32 hash_value;
--	int i, rar_entries = E1000_RAR_ENTRIES;
- int mta_reg_count = E1000_NUM_MTA_REGISTERS;
-+#endif
-+	u32 rctl;
-+	int i, rar_entries = E1000_RAR_ENTRIES;
- 
- 	/* reserve RAR[14] for LAA over-write work-around */
- 	if (hw->mac_type == iegbe_82571)
-@@ -2220,6 +2219,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 
- 	WARN_ON(i == rar_entries);
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- 	mc_ptr = netdev->mc_list;
- 
- 	for (; i < rar_entries; i++) {
-@@ -2247,6 +2247,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
- 		hash_value = iegbe_hash_mc_addr(hw, mc_ptr->da_addr);
- 		iegbe_mta_set(hw, hash_value);
- 	}
-+#endif
- 
- 	if (hw->mac_type == iegbe_82542_rev2_0)
- 		iegbe_leave_82542_rst(adapter);
-@@ -2821,14 +2822,14 @@ static int iegbe_tx_map(struct iegbe_ada
-              * Avoid terminating buffers within evenly-aligned
-              * dwords. */
-             if(unlikely(adapter->pcix_82544 &&
--			   !((unsigned long)(frag->page+offset+size-1) & 4) &&
-+			   !((unsigned long)(frag->page.p+offset+size-1) & 4) &&
- 			   size > 4))
- 				size -= 4;
- 
-             buffer_info->length = size;
-             buffer_info->dma =
-                 pci_map_page(adapter->pdev,
--                    frag->page,
-+                    frag->page.p,
-                     offset,
-                     size,
-                     PCI_DMA_TODEVICE);
-@@ -3131,7 +3132,7 @@ static int iegbe_xmit_frame(struct sk_bu
- 		}
- 	}
- 
--	if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
-+	if (unlikely(iegbe_vlan_used(adapter) && vlan_tx_tag_present(skb))) {
- 		tx_flags |= E1000_TX_FLAGS_VLAN;
- 		tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
- 	}
-@@ -3832,10 +3833,12 @@ static bool iegbe_clean_rx_irq(struct ie
- 
- 		skb->protocol = eth_type_trans(skb, netdev);
- 
--		if (unlikely(adapter->vlgrp &&
-+		if (unlikely(iegbe_vlan_used(adapter) &&
- 			    (status & E1000_RXD_STAT_VP))) {
--			vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
--						 le16_to_cpu(rx_desc->special));
-+			u16 vid;
-+
-+			vid = le16_to_cpu(rx_desc->special);
-+			__vlan_hwaccel_put_tag(skb, vid);
- 		} else {
- 			netif_receive_skb(skb);
- 		}
-@@ -3986,9 +3989,10 @@ copydone:
- 			   cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
-             adapter->rx_hdr_split++;
- 
--        if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
--            vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
--				le16_to_cpu(rx_desc->wb.middle.vlan));
-+        if(unlikely(iegbe_vlan_used(adapter) && (staterr & E1000_RXD_STAT_VP))) {
-+	    u16 vid;
-+	    vid = le16_to_cpu(rx_desc->wb.middle.vlan);
-+	    __vlan_hwaccel_put_tag(skb, vid);
-         } else {
-             netif_receive_skb(skb);
-         }
-@@ -4496,17 +4500,25 @@ iegbe_io_write(struct iegbe_hw *hw, unsi
-     outl(value, port);
- }
- 
--static void iegbe_vlan_rx_register(struct net_device *netdev,
--				   struct vlan_group *grp)
-+static bool iegbe_vlan_used(struct iegbe_adapter *adapter)
-+{
-+	u16 vid;
-+
-+	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
-+		return true;
-+
-+	return false;
-+}
-+
-+static void iegbe_vlan_mode(struct net_device *netdev, bool vlan_on)
- {
-     struct iegbe_adapter *adapter = netdev_priv(netdev);
-     uint32_t ctrl, rctl;
- 
- 	if (!test_bit(__E1000_DOWN, &adapter->flags))
-     iegbe_irq_disable(adapter);
--    adapter->vlgrp = grp;
- 
--    if(grp) {
-+    if(vlan_on) {
-         /* enable VLAN tag insert/strip */
-         ctrl = E1000_READ_REG(&adapter->hw, CTRL);
-         ctrl |= E1000_CTRL_VME;
-@@ -4538,30 +4550,37 @@ static void iegbe_vlan_rx_register(struc
-     iegbe_irq_enable(adapter);
- }
- 
--static void iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-+static int iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
- {
-     struct iegbe_adapter *adapter = netdev_priv(netdev);
-     uint32_t vfta, index;
-     if((adapter->hw.mng_cookie.status &
-         E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
-         (vid == adapter->mng_vlan_id)) {
--        return;
-+        return 0;
-     }
-+
-+    if (!iegbe_vlan_used(adapter))
-+	iegbe_vlan_mode(netdev, true);
-+
-     /* add VID to filter table */
-     index = (vid >> 0x5) & 0x7F;
-     vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
-     vfta |= (0x1 << (vid & 0x1F));
-     iegbe_write_vfta(&adapter->hw, index, vfta);
-+
-+    set_bit(vid, adapter->active_vlans);
-+
-+    return 0;
- }
- 
--static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-+static int iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
- {
- 	struct iegbe_adapter *adapter = netdev_priv(netdev);
- 	u32 vfta, index;
- 
- 	if (!test_bit(__E1000_DOWN, &adapter->flags))
- 	iegbe_irq_disable(adapter);
--	vlan_group_set_device(adapter->vlgrp, vid, NULL);
- 	if (!test_bit(__E1000_DOWN, &adapter->flags))
- 	iegbe_irq_enable(adapter);
- 
-@@ -4570,21 +4589,26 @@ static void iegbe_vlan_rx_kill_vid(struc
- 	vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
- 	vfta &= ~(0x1 << (vid & 0x1F));
- 	iegbe_write_vfta(&adapter->hw, index, vfta);
-+
-+	clear_bit(vid, adapter->active_vlans);
-+
-+	if (!iegbe_vlan_used(adapter))
-+		iegbe_vlan_mode(netdev, false);
-+
-+	return 0;
- }
- 
- static void iegbe_restore_vlan(struct iegbe_adapter *adapter)
- {
--	iegbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
--
--	if (adapter->vlgrp) {
- 		u16 vid;
--		for (vid = 0x0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
--			if (!vlan_group_get_device(adapter->vlgrp, vid))
--				continue;
-+
-+	if (!iegbe_vlan_used(adapter))
-+		return;
-+
-+	iegbe_vlan_mode(adapter->netdev, true);
-+	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- 			iegbe_vlan_rx_add_vid(adapter->netdev, vid);
- 		}
--	}
--}
- 
- 
- int iegbe_set_spd_dplx(struct iegbe_adapter *adapter, u16 spddplx)
-@@ -4864,10 +4888,11 @@ iegbe_resume(struct pci_dev *pdev)
-     default:
-         break;
-     }
--#endif
- 
-     return 0x0;
- }
-+#endif
-+
- 
- #ifdef CONFIG_NET_POLL_CONTROLLER
- /*
---- a/Embedded/src/GbE/iegbe_ethtool.c
-+++ b/Embedded/src/GbE/iegbe_ethtool.c
-@@ -327,6 +327,7 @@ iegbe_set_pauseparam(struct net_device *
-     return 0;
- }
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- static uint32_t
- iegbe_get_rx_csum(struct net_device *netdev)
- {
-@@ -392,6 +393,7 @@ iegbe_set_tso(struct net_device *netdev,
-     return 0;
- } 
- #endif /* NETIF_F_TSO */
-+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) */
- 
- static uint32_t
- iegbe_get_msglevel(struct net_device *netdev)
-@@ -807,6 +809,7 @@ err_setup_rx:
-             E1000_82542_##R : E1000_##R;                           \
-         return 1;         }  }
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- static int
- iegbe_reg_test(struct iegbe_adapter *adapter, uint64_t *data)
- {
-@@ -1710,6 +1713,7 @@ iegbe_diag_test(struct net_device *netde
-     }
-     msleep_interruptible(0xfa0);
- }
-+#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) */
- 
- static void
- iegbe_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
-@@ -1812,6 +1816,7 @@ iegbe_set_wol(struct net_device *netdev,
- /* bit defines for adapter->led_status */
- #define E1000_LED_ON        0
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- static void
- iegbe_led_blink_callback(unsigned long data)
- {
-@@ -1864,6 +1869,7 @@ iegbe_phys_id(struct net_device *netdev,
- 
-     return 0;
- }
-+#endif
- 
- static int
- iegbe_nway_reset(struct net_device *netdev)
-@@ -1876,11 +1882,13 @@ iegbe_nway_reset(struct net_device *netd
-     return 0;
- }
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
- static int 
- iegbe_get_stats_count(struct net_device *netdev)
- {
-     return E1000_STATS_LEN;
- }
-+#endif
- 
- static void 
- iegbe_get_ethtool_stats(struct net_device *netdev, 
-@@ -1936,6 +1944,8 @@ struct ethtool_ops iegbe_ethtool_ops = {
-     .set_ringparam          = iegbe_set_ringparam,
-     .get_pauseparam        = iegbe_get_pauseparam,
-     .set_pauseparam        = iegbe_set_pauseparam,
-+
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
-     .get_rx_csum        = iegbe_get_rx_csum,
-     .set_rx_csum        = iegbe_set_rx_csum,
-     .get_tx_csum            = iegbe_get_tx_csum,
-@@ -1946,11 +1956,13 @@ struct ethtool_ops iegbe_ethtool_ops = {
-     .get_tso        = ethtool_op_get_tso,
-     .set_tso        = iegbe_set_tso,
- #endif
-+
-     .self_test_count        = iegbe_diag_test_count,
-     .self_test              = iegbe_diag_test,
--    .get_strings            = iegbe_get_strings,
-     .phys_id                = iegbe_phys_id,
-     .get_stats_count        = iegbe_get_stats_count,
-+#endif
-+    .get_strings            = iegbe_get_strings,
-     .get_ethtool_stats      = iegbe_get_ethtool_stats,
- };
- 
---- a/Embedded/src/GbE/gcu_main.c
-+++ b/Embedded/src/GbE/gcu_main.c
-@@ -93,7 +93,7 @@ static struct pci_driver gcu_driver = {
- };
- 
- static struct gcu_adapter *global_adapter = 0;
--static spinlock_t global_adapter_spinlock = SPIN_LOCK_UNLOCKED;
-+static DEFINE_SPINLOCK(global_adapter_spinlock);
- static unsigned long g_intflags = 0;
- 
- MODULE_AUTHOR("Intel(R) Corporation");
---- a/Embedded/src/GbE/iegbe.h
-+++ b/Embedded/src/GbE/iegbe.h
-@@ -257,7 +257,7 @@ struct iegbe_adapter {
- 	struct timer_list tx_fifo_stall_timer;
- 	struct timer_list watchdog_timer;
- 	struct timer_list phy_info_timer;
--	struct vlan_group *vlgrp;
-+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
-     	uint16_t mng_vlan_id;
- 	uint32_t bd_number;
- 	uint32_t rx_buffer_len;

package/kernel/ep80579-drivers/patches/712-3.3-can-fixes.patch

@@ -1,41 +0,0 @@
---- a/Embedded/src/CAN/can_main.c
-+++ b/Embedded/src/CAN/can_main.c
-@@ -72,6 +72,7 @@
- #include "can_main.h"
- #include "can_ioctl.h"
- #include <linux/fs.h>
-+#include <linux/module.h>
- 
- 
- MODULE_AUTHOR("Intel(R) Corporation");
-@@ -110,7 +111,7 @@ struct file_operations file_ops = {
-     .owner        = THIS_MODULE,
-     .read        = can_read,
-     .write        = can_write,
--    .ioctl        = can_dev_io,
-+    .unlocked_ioctl = can_dev_io,
-     .open        = can_open,
-     .release     = can_release
- };
-@@ -594,8 +595,7 @@ int icp_can_reset(can_os_t *can_os)
- /*****************************************************************************
-  * Device IO control function. Used by user apps to configure CAN device.
-  *****************************************************************************/
--int can_dev_io(struct inode *inode, struct file *filp, unsigned int cmd,
--      unsigned long arg)
-+long can_dev_io(struct file *filp, unsigned int cmd, unsigned long arg)
- {
-     can_os_t *can_os;
-     unsigned int err=0;
---- a/Embedded/src/CAN/can_main.h
-+++ b/Embedded/src/CAN/can_main.h
-@@ -157,8 +157,7 @@ ssize_t can_write(
- int icp_can_reset(
-     can_os_t *can_os);
-     
--int can_dev_io(
--    struct inode *inode, 
-+long can_dev_io(
-     struct file *filp, 
-     unsigned int cmd, 
-     unsigned long arg);

package/kernel/ep80579-drivers/patches/713-3.3-gpio-fixes.patch

@@ -1,33 +0,0 @@
---- a/Embedded/src/GPIO/gpio.h
-+++ b/Embedded/src/GPIO/gpio.h
-@@ -121,8 +121,7 @@ int gpio_init(void);
- void gpio_close(void);
- int gpio_open(struct inode *inode, struct file *filp);
- int gpio_release(struct inode *inode, struct file *filp);
--int gpio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, 
--			   unsigned long arg);
-+long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
- 
- // private driver functions
- int gpio_getpininfo(int Signal, char *pBuff);
-@@ -134,7 +133,7 @@ struct file_operations file_ops =
- 	.owner	=	THIS_MODULE,
- 	.open   =    gpio_open,
- 	.release =   gpio_release,	
--	.ioctl	=	gpio_ioctl,
-+	.unlocked_ioctl	= gpio_ioctl,
- };
- 
- #endif
---- a/Embedded/src/GPIO/gpio_ref.c
-+++ b/Embedded/src/GPIO/gpio_ref.c
-@@ -251,8 +251,7 @@ int gpio_release(struct inode *inode, st
-       0 => success
-     < 0 => error
- ******************************************************************************/
--int gpio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
--                unsigned long arg)
-+long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
- {
-     gpio_ioctl_t Info;
-     u_int bitstr = 0;

package/kernel/ep80579-drivers/patches/714-3.3-wdt-fixes.patch

@@ -1,31 +0,0 @@
---- a/Embedded/src/WDT/iwdt.c
-+++ b/Embedded/src/WDT/iwdt.c
-@@ -217,8 +217,7 @@ static int wdt_open(struct inode *inode,
- static int wdt_release(struct inode *inode, struct file *file);
- static ssize_t wdt_write(struct file *file, const char *data,
-                      size_t count, loff_t * pos);
--static int wdt_ioctl(struct inode *inode, struct file *file,
--                    unsigned int cmd, unsigned long arg);
-+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
- static irqreturn_t wdt_isr(int irq, void *dev_id);
- static void __exit wdt_cleanup(void);
- static int __init wdt_init(void);
-@@ -243,7 +242,7 @@ static struct pci_device_id lpc_pci_tbl[
- static struct file_operations wdt_fops = {
-      owner:        THIS_MODULE,
-      write:        wdt_write,
--     ioctl:        wdt_ioctl,
-+     unlocked_ioctl: wdt_ioctl,
-      open:         wdt_open,
-      release:      wdt_release,
- };
-@@ -1201,8 +1200,7 @@ char *wdt_get_ioctl_string(unsigned int
-  * Return Value:    0 - successful, negative value - failed.
-  * Description:     This function is used to provide IO interface.
-  */
--static int wdt_ioctl(struct inode *inode, struct file *file,
--                    unsigned int cmd, unsigned long arg)
-+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
- {
-      u8  mode=0, scale=0, int_type=0;
-      u32 u_margin=0, dcount=0;

package/kernel/ep80579-drivers/patches/715-3.3-1588-fixes.patch

@@ -1,33 +0,0 @@
---- a/Embedded/src/1588/1588.c
-+++ b/Embedded/src/1588/1588.c
-@@ -664,8 +664,7 @@ irqreturn_t timesync_isr(int irq, void *
-       0 => success
-     < 0 => error
- ******************************************************************************/
--int timesync_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
--                unsigned long arg)
-+long timesync_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
- {
-     wait_queue_head_t *event = NULL;
-     unsigned int bytes_ret = 0;
---- a/Embedded/src/1588/1588.h
-+++ b/Embedded/src/1588/1588.h
-@@ -121,8 +121,7 @@ MODULE_DEVICE_TABLE(pci, pci_ids);
- // Linux functions
- int timesync_open(struct inode *inode, struct file *filp);
- int timesync_release(struct inode *inode, struct file *filp);
--int timesync_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
--				unsigned long arg);
-+long timesync_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
- void timesync_close(void);
- int pci_suspend(struct pci_dev *dev, pm_message_t state);
- int pci_resume(struct pci_dev *dev);
-@@ -142,7 +141,7 @@ struct file_operations file_ops =
- 	.owner		= THIS_MODULE,
- 	.open     = timesync_open,
- 	.release    = timesync_release,	
--	.ioctl		= timesync_ioctl,
-+	.unlocked_ioctl = timesync_ioctl,
- };
- 
- // Linux pci operations

package/kernel/gpio-nct5104d/Makefile

@@ -0,0 +1,52 @@
+#
+# Copyright (C) 2017 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=gpio-nct5104d
+PKG_RELEASE:=1
+
+PKG_MAINTAINER:=Florian Eckert <Eckert.Florian@googlemail.com>
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/gpio-nct5104d
+  SUBMENU:=Other modules
+  TITLE:= GPIO nct5104d support
+  DEPENDS:= @GPIO_SUPPORT @TARGET_x86
+  FILES:=$(PKG_BUILD_DIR)/gpio-nct5104d.ko
+  AUTOLOAD:=$(call AutoLoad,30,gpio-nct5104d,1)
+  KCONFIG:=
+endef
+
+define KernelPackage/gpio-nct5104d/description
+  Support for GPIO functionality of NCT5104D super I/O chip.
+endef
+
+EXTRA_KCONFIG:= \
+	CONFIG_GPIO_NCT5104D=m
+
+EXTRA_CFLAGS:= \
+	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(EXTRA_KCONFIG)))) \
+	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(EXTRA_KCONFIG)))) \
+
+MAKE_OPTS:= \
+	ARCH="$(LINUX_KARCH)" \
+	CROSS_COMPILE="$(TARGET_CROSS)" \
+	SUBDIRS="$(PKG_BUILD_DIR)" \
+	EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
+	$(EXTRA_KCONFIG)
+
+define Build/Compile
+	 $(MAKE) -C "$(LINUX_DIR)" \
+		$(MAKE_OPTS) \
+		modules
+endef
+
+$(eval $(call KernelPackage,gpio-nct5104d))

package/kernel/gpio-nct5104d/src/Kconfig

@@ -0,0 +1,5 @@
+config GPIO_NCT5104D
+        tristate "NCT5104D GPIO support"
+        depends on GENERIC_GPIO
+        help
+          Say yes here to support GPIO functionality of NCT5104D super I/O chip

package/kernel/gpio-nct5104d/src/Makefile

@@ -0,0 +1 @@
+obj-${CONFIG_GPIO_NCT5104D}    += gpio-nct5104d.o

package/kernel/gpio-nct5104d/src/gpio-nct5104d.c

@@ -0,0 +1,461 @@
+/*
+ * GPIO driver for NCT5104D
+ *
+ * Author: Tasanakorn Phaipool <tasanakorn@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/version.h>
+#include <linux/dmi.h>
+#include <linux/string.h>
+
+#define DRVNAME "gpio-nct5104d"
+
+/*
+ * Super-I/O registers
+ */
+#define SIO_LDSEL		0x07	/* Logical device select */
+#define SIO_CHIPID		0x20	/* Chaip ID (2 bytes) */
+#define SIO_GPIO_ENABLE	0x30	/* GPIO enable */
+#define SIO_GPIO1_MODE		0xE0	/* GPIO1 Mode OpenDrain/Push-Pull */
+#define SIO_GPIO2_MODE		0xE1	/* GPIO2 Mode OpenDrain/Push-Pull */
+
+#define SIO_LD_GPIO		0x07	/* GPIO logical device */
+#define SIO_LD_GPIO_MODE	0x0F	/* GPIO mode control device */
+#define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
+#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
+
+#define SIO_NCT5104D_ID					0x1061	/* Chip ID */
+#define SIO_PCENGINES_APU_NCT5104D_ID	0xc452	/* Chip ID */
+
+enum chips { nct5104d };
+
+static const char * const nct5104d_names[] = {
+	"nct5104d"
+};
+
+struct nct5104d_sio {
+	int addr;
+	enum chips type;
+};
+
+struct nct5104d_gpio_bank {
+	struct gpio_chip chip;
+	unsigned int regbase;
+	struct nct5104d_gpio_data *data;
+};
+
+struct nct5104d_gpio_data {
+	struct nct5104d_sio *sio;
+	int nr_bank;
+	struct nct5104d_gpio_bank *bank;
+};
+
+/*
+ * Super-I/O functions.
+ */
+
+static inline int superio_inb(int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static int superio_inw(int base, int reg)
+{
+	int val;
+
+	outb(reg++, base);
+	val = inb(base + 1) << 8;
+	outb(reg, base);
+	val |= inb(base + 1);
+
+	return val;
+}
+
+static inline void superio_outb(int base, int reg, int val)
+{
+	outb(reg, base);
+	outb(val, base + 1);
+}
+
+static inline int superio_enter(int base)
+{
+	/* Don't step on other drivers' I/O space by accident. */
+	if (!request_muxed_region(base, 2, DRVNAME)) {
+		pr_err(DRVNAME "I/O address 0x%04x already in use\n", base);
+		return -EBUSY;
+	}
+
+	/* According to the datasheet the key must be send twice. */
+	outb(SIO_UNLOCK_KEY, base);
+	outb(SIO_UNLOCK_KEY, base);
+
+	return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+	outb(SIO_LDSEL, base);
+	outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+	outb(SIO_LOCK_KEY, base);
+	release_region(base, 2);
+}
+
+/*
+ * GPIO chip.
+ */
+
+static int nct5104d_gpio_direction_in(struct gpio_chip *chip, unsigned offset);
+static int nct5104d_gpio_get(struct gpio_chip *chip, unsigned offset);
+static int nct5104d_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value);
+static void nct5104d_gpio_set(struct gpio_chip *chip, unsigned offset, int value);
+
+#define NCT5104D_GPIO_BANK(_base, _ngpio, _regbase)			\
+	{								\
+		.chip = {						\
+			.label            = DRVNAME,			\
+			.owner            = THIS_MODULE,		\
+			.direction_input  = nct5104d_gpio_direction_in,	\
+			.get              = nct5104d_gpio_get,		\
+			.direction_output = nct5104d_gpio_direction_out,	\
+			.set              = nct5104d_gpio_set,		\
+			.base             = _base,			\
+			.ngpio            = _ngpio,			\
+			.can_sleep        = true,			\
+		},							\
+		.regbase = _regbase,					\
+	}
+
+#define gpio_dir(base) (base + 0)
+#define gpio_data(base) (base + 1)
+
+static struct nct5104d_gpio_bank nct5104d_gpio_bank[] = {
+	NCT5104D_GPIO_BANK(0 , 8, 0xE0),
+	NCT5104D_GPIO_BANK(10, 8, 0xE4)
+};
+
+static int nct5104d_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	int err;
+	struct nct5104d_gpio_bank *bank =
+		container_of(chip, struct nct5104d_gpio_bank, chip);
+	struct nct5104d_sio *sio = bank->data->sio;
+	u8 dir;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
+	dir |= (1 << offset);
+	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
+
+	superio_exit(sio->addr);
+
+	return 0;
+}
+
+static int nct5104d_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	int err;
+	struct nct5104d_gpio_bank *bank =
+		container_of(chip, struct nct5104d_gpio_bank, chip);
+	struct nct5104d_sio *sio = bank->data->sio;
+	u8 data;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	data = superio_inb(sio->addr, gpio_data(bank->regbase));
+
+	superio_exit(sio->addr);
+
+	return !!(data & 1 << offset);
+}
+
+static int nct5104d_gpio_direction_out(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	int err;
+	struct nct5104d_gpio_bank *bank =
+		container_of(chip, struct nct5104d_gpio_bank, chip);
+	struct nct5104d_sio *sio = bank->data->sio;
+	u8 dir, data_out;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return err;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	data_out = superio_inb(sio->addr, gpio_data(bank->regbase));
+	if (value)
+		data_out |= (1 << offset);
+	else
+		data_out &= ~(1 << offset);
+	superio_outb(sio->addr, gpio_data(bank->regbase), data_out);
+
+	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
+	dir &= ~(1 << offset);
+	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
+
+	superio_exit(sio->addr);
+
+	return 0;
+}
+
+static void nct5104d_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	int err;
+	struct nct5104d_gpio_bank *bank =
+		container_of(chip, struct nct5104d_gpio_bank, chip);
+	struct nct5104d_sio *sio = bank->data->sio;
+	u8 data_out;
+
+	err = superio_enter(sio->addr);
+	if (err)
+		return;
+	superio_select(sio->addr, SIO_LD_GPIO);
+
+	data_out = superio_inb(sio->addr, gpio_data(bank->regbase));
+	if (value)
+		data_out |= (1 << offset);
+	else
+		data_out &= ~(1 << offset);
+	superio_outb(sio->addr, gpio_data(bank->regbase), data_out);
+
+	superio_exit(sio->addr);
+}
+
+/*
+ * Platform device and driver.
+ */
+
+static int nct5104d_gpio_probe(struct platform_device *pdev)
+{
+	int err;
+	int i;
+	struct nct5104d_sio *sio = pdev->dev.platform_data;
+	struct nct5104d_gpio_data *data;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	switch (sio->type) {
+	case nct5104d:
+		data->nr_bank = ARRAY_SIZE(nct5104d_gpio_bank);
+		data->bank = nct5104d_gpio_bank;
+		break;
+	default:
+		return -ENODEV;
+	}
+	data->sio = sio;
+
+	platform_set_drvdata(pdev, data);
+
+	/* For each GPIO bank, register a GPIO chip. */
+	for (i = 0; i < data->nr_bank; i++) {
+		struct nct5104d_gpio_bank *bank = &data->bank[i];
+
+		bank->chip.dev = &pdev->dev;
+		bank->data = data;
+
+		err = gpiochip_add(&bank->chip);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Failed to register gpiochip %d: %d\n",
+				i, err);
+			goto err_gpiochip;
+		}
+	}
+
+	return 0;
+
+err_gpiochip:
+	for (i = i - 1; i >= 0; i--) {
+		struct nct5104d_gpio_bank *bank = &data->bank[i];
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0)
+		int rm_err = gpiochip_remove(&bank->chip);
+		if (rm_err < 0)
+			dev_err(&pdev->dev,
+				"Failed to remove gpiochip %d: %d\n",
+				i, rm_err);
+#else /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
+		gpiochip_remove (&bank->chip);
+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
+	}
+
+	return err;
+}
+
+static int nct5104d_gpio_remove(struct platform_device *pdev)
+{
+	int i;
+	struct nct5104d_gpio_data *data = platform_get_drvdata(pdev);
+
+	for (i = 0; i < data->nr_bank; i++) {
+		struct nct5104d_gpio_bank *bank = &data->bank[i];
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0)
+		int err = gpiochip_remove(&bank->chip);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Failed to remove GPIO gpiochip %d: %d\n",
+				i, err);
+			return err;
+		}
+#else /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
+		gpiochip_remove (&bank->chip);
+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
+	}
+
+	return 0;
+}
+
+static int __init nct5104d_find(int addr, struct nct5104d_sio *sio)
+{
+	int err;
+	u16 devid;
+	u8 gpio_cfg;
+
+	err = superio_enter(addr);
+	if (err)
+		return err;
+
+	err = -ENODEV;
+
+	devid = superio_inw(addr, SIO_CHIPID);
+	switch (devid) {
+	case SIO_NCT5104D_ID:
+	case SIO_PCENGINES_APU_NCT5104D_ID:
+		sio->type = nct5104d;
+		/* enable GPIO0 and GPIO1 */
+		superio_select(addr, SIO_LD_GPIO);
+		gpio_cfg = superio_inb(addr, SIO_GPIO_ENABLE);
+		gpio_cfg |= 0x03;
+		superio_outb(addr, SIO_GPIO_ENABLE, gpio_cfg);
+		break;
+	default:
+		pr_info(DRVNAME ": Unsupported device 0x%04x\n", devid);
+		goto err;
+	}
+	sio->addr = addr;
+	err = 0;
+
+	pr_info(DRVNAME ": Found %s at %#x chip id 0x%04x\n",
+		nct5104d_names[sio->type],
+		(unsigned int) addr,
+		(int) superio_inw(addr, SIO_CHIPID));
+
+        superio_select(sio->addr, SIO_LD_GPIO_MODE);
+        superio_outb(sio->addr, SIO_GPIO1_MODE, 0x0);
+        superio_outb(sio->addr, SIO_GPIO2_MODE, 0x0);
+
+err:
+	superio_exit(addr);
+	return err;
+}
+
+static struct platform_device *nct5104d_gpio_pdev;
+
+static int __init
+nct5104d_gpio_device_add(const struct nct5104d_sio *sio)
+{
+	int err;
+
+	nct5104d_gpio_pdev = platform_device_alloc(DRVNAME, -1);
+	if (!nct5104d_gpio_pdev)
+		pr_err(DRVNAME ": Error platform_device_alloc\n");
+	if (!nct5104d_gpio_pdev)
+		return -ENOMEM;
+
+	err = platform_device_add_data(nct5104d_gpio_pdev,
+				       sio, sizeof(*sio));
+	if (err) {
+		pr_err(DRVNAME "Platform data allocation failed\n");
+		goto err;
+	}
+
+	err = platform_device_add(nct5104d_gpio_pdev);
+	if (err) {
+		pr_err(DRVNAME "Device addition failed\n");
+		goto err;
+	}
+	pr_info(DRVNAME ": Device added\n");
+	return 0;
+
+err:
+	platform_device_put(nct5104d_gpio_pdev);
+
+	return err;
+}
+
+/*
+ */
+
+static struct platform_driver nct5104d_gpio_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= DRVNAME,
+	},
+	.probe		= nct5104d_gpio_probe,
+	.remove		= nct5104d_gpio_remove,
+};
+
+static int __init nct5104d_gpio_init(void)
+{
+	int err;
+	struct nct5104d_sio sio;
+	const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+	const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+ 	/* Make sure we only run on PC Engine APU boards */
+	if (!board_name || !board_vendor || strcasecmp(board_vendor, "PC Engines") || strncasecmp(board_name, "apu", 3)) {
+		return -ENODEV;
+	}
+
+	if (nct5104d_find(0x2e, &sio) &&
+	    nct5104d_find(0x4e, &sio))
+		return -ENODEV;
+
+	err = platform_driver_register(&nct5104d_gpio_driver);
+	if (!err) {
+		pr_info(DRVNAME ": platform_driver_register\n");
+		err = nct5104d_gpio_device_add(&sio);
+		if (err)
+			platform_driver_unregister(&nct5104d_gpio_driver);
+	}
+
+	return err;
+}
+subsys_initcall(nct5104d_gpio_init);
+
+static void __exit nct5104d_gpio_exit(void)
+{
+	platform_device_unregister(nct5104d_gpio_pdev);
+	platform_driver_unregister(&nct5104d_gpio_driver);
+}
+module_exit(nct5104d_gpio_exit);
+
+MODULE_DESCRIPTION("GPIO driver for Super-I/O chips NCT5104D");
+MODULE_AUTHOR("Tasanakorn Phaipool <tasanakorn@gmail.com>");
+MODULE_LICENSE("GPL");

package/kernel/leds-apu2/Makefile

@@ -0,0 +1,52 @@
+#
+# Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=leds-apu2
+PKG_RELEASE:=1
+
+PKG_MAINTAINER:=Chris Blake <chrisrblake93@gmail.com>
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/leds-apu2
+  SUBMENU:=LED modules
+  TITLE:= PC Engines APU2/APU3 LED support
+  DEPENDS:= @GPIO_SUPPORT @TARGET_x86
+  FILES:=$(PKG_BUILD_DIR)/leds-apu2.ko
+  AUTOLOAD:=$(call AutoLoad,41,leds-apu2,1)
+  KCONFIG:=
+endef
+
+define KernelPackage/leds-apu2/description
+  Driver for the PC Engines APU2/APU3 LEDs & Reset Button.
+endef
+
+EXTRA_KCONFIG:= \
+	CONFIG_LEDS_APU2=m
+
+EXTRA_CFLAGS:= \
+	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(EXTRA_KCONFIG)))) \
+	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(EXTRA_KCONFIG)))) \
+
+MAKE_OPTS:= \
+	ARCH="$(LINUX_KARCH)" \
+	CROSS_COMPILE="$(TARGET_CROSS)" \
+	SUBDIRS="$(PKG_BUILD_DIR)" \
+	EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
+	$(EXTRA_KCONFIG)
+
+define Build/Compile
+	 $(MAKE) -C "$(LINUX_DIR)" \
+		$(MAKE_OPTS) \
+		modules
+endef
+
+$(eval $(call KernelPackage,leds-apu2))

package/kernel/leds-apu2/src/Kconfig

@@ -0,0 +1,8 @@
+config LEDS_APU2
+        tristate "PC Engines APU2/APU3 LED support"
+        depends on LEDS_CLASS
+        depends on LEDS_GPIO
+        depends on GPIOLIB
+        help
+          Say yes here to enable support for the CPU GPIO pins on the PC Engines
+          APU2/APU3 board, which enables the front LEDs and Reset Button.

package/kernel/leds-apu2/src/Makefile

@@ -0,0 +1 @@
+obj-${CONFIG_LEDS_APU2}    += leds-apu2.o

package/kernel/leds-apu2/src/leds-apu2.c

@@ -0,0 +1,374 @@
+/*
+*  APU2 LED/GPIO Driver
+*  Copyright (c) 2016 Christian Lamparter <chunkeey (at) googlemail.com>
+*
+*  Based on gpio-apu2.c - AMD FCH GPIO support for PC-Engines APU-2 board
+*
+*  Copyright (c) 2015  Carsten Spiess <fli4l at carsten-spiess.de>
+*
+*  This program is free software; you can redistribute it and/or modify
+*  it under the terms of the GNU General Public License as published by
+*  the Free Software Foundation; either version 2 of the License, or
+*  (at your option) any later version.
+*
+*  This program is distributed in the hope that it will be useful,
+*  but WITHOUT ANY WARRANTY; without even the implied warranty of
+*  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+*  GNU General Public License for more details.
+*
+*  You should have received a copy of the GNU General Public License
+*  along with this program; if not, write to the Free Software
+*  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#include <linux/dmi.h>
+#include <linux/string.h>
+
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#define DEVNAME                 "leds-apu2"
+
+#define FCH_ACPI_MMIO_BASE      0xFED80000
+#define FCH_GPIO_BASE           (FCH_ACPI_MMIO_BASE + 0x1500)
+#define FCH_GPIO_SIZE           0x300
+
+#define APU_NUM_GPIO            4
+
+#define GPIO_BIT_DIR            23
+#define GPIO_BIT_WRITE          22
+#define GPIO_BIT_READ           16
+
+/* internal variables */
+static struct pci_dev *gpio_apu2_pci;
+static DEFINE_SPINLOCK (gpio_lock);
+
+/* the watchdog platform device */
+static struct platform_device *gpio_apu2_platform_device;
+static struct platform_device *leddev;
+static struct platform_device *keydev;
+
+static const struct pci_device_id gpio_apu2_pci_tbl[] ={
+	{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, PCI_ANY_ID, PCI_ANY_ID},
+	{ 0, } /* End of list */
+};
+MODULE_DEVICE_TABLE (pci, gpio_apu2_pci_tbl);
+
+/* EGPIO89=GPIO32, AGPIO68=GPIO57, AGPIO69=GPIO58, AGPIO70=GPIO59 */
+static u8 gpio_offset[APU_NUM_GPIO] = {89, 68, 69, 70};
+
+static void __iomem *gpio_addr[APU_NUM_GPIO] = {NULL, NULL, NULL, NULL};
+
+static int gpio_apu2_get_dir (struct gpio_chip *chip, unsigned offset)
+{
+	u32 val;
+
+	val = ~ioread32 (gpio_addr[offset]);
+
+	return (val >> GPIO_BIT_DIR) & 1;
+}
+
+static int gpio_apu2_dir_in (struct gpio_chip *gc, unsigned offset)
+{
+	u32 val;
+
+	spin_lock_bh (&gpio_lock);
+
+	val = ioread32 (gpio_addr[offset]);
+	val &= ~BIT(GPIO_BIT_DIR);
+	iowrite32 (val, gpio_addr[offset]);
+
+	spin_unlock_bh (&gpio_lock);
+
+	return 0;
+}
+
+static int gpio_apu2_dir_out (struct gpio_chip *chip, unsigned offset,
+		int value)
+{
+	u32 val;
+
+	spin_lock_bh (&gpio_lock);
+
+	val = ioread32 (gpio_addr[offset]);
+	val |= BIT(GPIO_BIT_DIR);
+	iowrite32 (val, gpio_addr[offset]);
+
+	spin_unlock_bh (&gpio_lock);
+
+	return 0;
+}
+
+static int gpio_apu2_get_data (struct gpio_chip *chip, unsigned offset)
+{
+	u32 val;
+
+	val = ioread32 (gpio_addr[offset]);
+
+	return (val >> GPIO_BIT_READ) & 1;
+}
+
+static void gpio_apu2_set_data (struct gpio_chip *chip, unsigned offset, int value)
+{
+	u32 val;
+
+	spin_lock_bh (&gpio_lock);
+
+	val = ioread32 (gpio_addr[offset]);
+
+	if (value)
+		val |= BIT(GPIO_BIT_WRITE);
+	else
+		val &= ~BIT(GPIO_BIT_WRITE);
+
+	iowrite32 (val, gpio_addr[offset]);
+
+	spin_unlock_bh (&gpio_lock);
+}
+
+static struct gpio_chip gpio_apu2_chip = {
+	.label = DEVNAME,
+	.owner = THIS_MODULE,
+	.base = -1,
+	.ngpio = APU_NUM_GPIO,
+	.get_direction = gpio_apu2_get_dir,
+	.direction_input = gpio_apu2_dir_in,
+	.direction_output = gpio_apu2_dir_out,
+	.get = gpio_apu2_get_data,
+	.set = gpio_apu2_set_data,
+};
+
+/*
+ *
+ */
+static int gpio_apu2_probe (struct platform_device *dev)
+{
+	int ret = 0;
+	int i;
+	struct pci_dev *pci_dev = NULL;
+
+	/* Match the PCI device */
+	for_each_pci_dev (pci_dev) {
+		if (pci_match_id (gpio_apu2_pci_tbl, pci_dev) != NULL) {
+			gpio_apu2_pci = pci_dev;
+			break;
+		}
+	}
+
+	if (!gpio_apu2_pci)
+		return -ENODEV;
+
+	pr_info ("%s: PCI Revision ID: 0x%x\n", DEVNAME, gpio_apu2_pci->revision);
+
+	/* Determine type of southbridge chipset */
+	if (gpio_apu2_pci->revision < 0x40) {
+		return -EACCES;
+	}
+
+	/* Request memory region for GPIO's */
+	if (!devm_request_mem_region (&dev->dev, FCH_GPIO_BASE,
+		FCH_GPIO_SIZE, DEVNAME)){
+		pr_err ("%s: request GPIO mem region failed\n", DEVNAME);
+		return -ENXIO;
+	}
+
+	/* Map IO's for GPIO's */
+	for (i = 0; i < APU_NUM_GPIO; i++) {
+		gpio_addr[i] = devm_ioremap (&dev->dev,
+			FCH_GPIO_BASE + (gpio_offset[i] * sizeof (u32)), sizeof (u32));
+		if (!gpio_addr[i]) {
+			pr_err ("%s: map GPIO%d address failed\n", DEVNAME, gpio_offset[i]);
+			return -ENXIO;
+		}
+	}
+
+	gpio_apu2_chip.dev = &dev->dev;
+	ret = gpiochip_add (&gpio_apu2_chip);
+	if (ret) {
+		pr_err ("%s: adding gpiochip failed\n", DEVNAME);
+	}
+
+	return ret;
+}
+
+static int gpio_apu2_remove (struct platform_device *dev)
+{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0)
+	int ret;
+	ret = gpiochip_remove (&gpio_apu2_chip);
+#else /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
+	gpiochip_remove (&gpio_apu2_chip);
+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
+	return 0;
+}
+
+static struct platform_driver gpio_apu2_driver = {
+	.probe = gpio_apu2_probe,
+	.remove = gpio_apu2_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = DEVNAME
+	}
+};
+
+static struct gpio_led apu2_leds_gpio[] = {
+        {
+                .name           = "apu2:green:power",
+                .gpio           = 509,
+                .active_low     = 1,
+        },
+        {
+                .name           = "apu2:green:led2",
+                .gpio           = 510,
+                .active_low     = 1,
+        },
+        {
+                .name           = "apu2:green:led3",
+                .gpio           = 511,
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_button apu2_gpio_keys[] = {
+	{
+		.desc           = "Reset button",
+		.type           = EV_KEY,
+		.code           = KEY_RESTART,
+		.debounce_interval = 60,
+		.gpio           = 508,
+		.active_low     = 1,
+	},
+};
+
+static void register_gpio_keys_polled(int id, unsigned poll_interval,
+				      unsigned nbuttons,
+				      struct gpio_keys_button *buttons)
+{
+	struct gpio_keys_platform_data pdata = { };
+	int err;
+
+	keydev = platform_device_alloc("gpio-keys-polled", id);
+	if (!keydev) {
+		printk(KERN_ERR "Failed to allocate gpio-keys platform device\n");
+		return;
+	}
+
+	pdata.poll_interval = poll_interval;
+	pdata.nbuttons = nbuttons;
+	pdata.buttons = buttons;
+
+	err = platform_device_add_data(keydev, &pdata, sizeof(pdata));
+	if (err) {
+		dev_err(&keydev->dev, "failed to add platform data to key driver (%d)", err);
+		goto err_put_pdev;
+	}
+
+	err = platform_device_add(keydev);
+	if (err) {
+		dev_err(&keydev->dev, "failed to register key platform device (%d)", err);
+		goto err_put_pdev;
+	}
+
+	return;
+
+err_put_pdev:
+	platform_device_put(keydev);
+	keydev = NULL;
+}
+
+static void register_leds_gpio(int id, unsigned num_leds, struct gpio_led *leds)
+{
+	struct gpio_led_platform_data pdata = { };
+	int err;
+
+	leddev = platform_device_alloc("leds-gpio", id);
+	if (!leddev) {
+		printk(KERN_ERR "Failed to allocate leds-gpio platform device\n");
+		return;
+	}
+
+	pdata.num_leds = num_leds;
+	pdata.leds = leds;
+
+	err = platform_device_add_data(leddev, &pdata, sizeof(pdata));
+	if (err) {
+		dev_err(&leddev->dev, "failed to add platform data to key driver (%d)", err);
+		goto err_put_pdev;
+	}
+
+	err = platform_device_add(leddev);
+	if (err) {
+		dev_err(&leddev->dev, "failed to register key platform device (%d)", err);
+		goto err_put_pdev;
+	}
+
+	return;
+
+err_put_pdev:
+	platform_device_put(leddev);
+	leddev = NULL;
+}
+
+static int __init gpio_apu2_init (void)
+{
+	int err;
+	const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+	const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+	/* Match the device name/model */
+	if (!board_name || !board_vendor || strcasecmp(board_vendor, "PC Engines") || strcasecmp(board_name, "apu2")) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	pr_info ("%s: load APU2/LED GPIO driver module\n", DEVNAME);
+
+	err = platform_driver_register (&gpio_apu2_driver);
+	if (err)
+		goto exit;
+
+	gpio_apu2_platform_device = platform_device_register_simple (DEVNAME, -1, NULL, 0);
+	if (IS_ERR(gpio_apu2_platform_device)) {
+		err = PTR_ERR(gpio_apu2_platform_device);
+		goto exit_driver;
+	}
+
+	pr_info ("%s: APU2 GPIO/LED driver module loaded\n", DEVNAME);
+
+	register_leds_gpio(-1, ARRAY_SIZE(apu2_leds_gpio), apu2_leds_gpio);
+	register_gpio_keys_polled(-1, 20, ARRAY_SIZE(apu2_gpio_keys), apu2_gpio_keys);
+	return 0;
+
+exit_driver:
+	platform_driver_unregister (&gpio_apu2_driver);
+exit:
+	return err;
+}
+
+static void __exit gpio_apu2_exit (void)
+{
+	platform_device_unregister (gpio_apu2_platform_device);
+	platform_device_unregister (leddev);
+	platform_device_unregister (keydev);
+	platform_driver_unregister (&gpio_apu2_driver);
+	pr_info ("%s: APU2 GPIO/LED driver module unloaded\n", DEVNAME);
+}
+
+MODULE_AUTHOR ("Carsten Spiess <fli4l at carsten-spiess.de>");
+MODULE_DESCRIPTION("GPIO driver for AMD FCH on PC-Engines APU-2");
+MODULE_LICENSE("GPL");
+
+module_init (gpio_apu2_init);
+module_exit (gpio_apu2_exit);

package/kernel/linux/modules/crypto.mk

@@ -436,7 +436,7 @@ endef
 
 define KernelPackage/crypto-md5/octeon
   FILES+=$(LINUX_DIR)/arch/mips/cavium-octeon/crypto/octeon-md5.ko
-  AUTOLOAD:=$(call AutoLoad,09,octeon-md5)
+  AUTOLOAD+=$(call AutoLoad,09,octeon-md5)
 endef
 
 $(eval $(call KernelPackage,crypto-md5))
@@ -468,12 +468,12 @@ endef
 
 define KernelPackage/crypto-sha1/octeon
   FILES+=$(LINUX_DIR)/arch/mips/cavium-octeon/crypto/octeon-sha1.ko
-  AUTOLOAD:=$(call AutoLoad,09,octeon-sha1)
+  AUTOLOAD+=$(call AutoLoad,09,octeon-sha1)
 endef
 
 define KernelPackage/crypto-sha1/x86/64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha1-ssse3.ko
-  AUTOLOAD:=$(call AutoLoad,09,sha1-ssse3)
+  AUTOLOAD+=$(call AutoLoad,09,sha1-ssse3)
 endef
 
 $(eval $(call KernelPackage,crypto-sha1))
@@ -493,12 +493,12 @@ endef
 
 define KernelPackage/crypto-sha256/octeon
   FILES+=$(LINUX_DIR)/arch/mips/cavium-octeon/crypto/octeon-sha256.ko
-  AUTOLOAD:=$(call AutoLoad,09,octeon-sha256)
+  AUTOLOAD+=$(call AutoLoad,09,octeon-sha256)
 endef
 
 define KernelPackage/crypto-sha256/x86/64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha256-ssse3.ko
-  AUTOLOAD:=$(call AutoLoad,09,sha256-ssse3)
+  AUTOLOAD+=$(call AutoLoad,09,sha256-ssse3)
 endef
 
 $(eval $(call KernelPackage,crypto-sha256))
@@ -518,12 +518,12 @@ endef
 
 define KernelPackage/crypto-sha512/octeon
   FILES+=$(LINUX_DIR)/arch/mips/cavium-octeon/crypto/octeon-sha512.ko
-  AUTOLOAD:=$(call AutoLoad,09,octeon-sha512)
+  AUTOLOAD+=$(call AutoLoad,09,octeon-sha512)
 endef
 
 define KernelPackage/crypto-sha512/x86/64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha512-ssse3.ko
-  AUTOLOAD:=$(call AutoLoad,09,sha512-ssse3)
+  AUTOLOAD+=$(call AutoLoad,09,sha512-ssse3)
 endef
 
 $(eval $(call KernelPackage,crypto-sha512))

package/kernel/linux/modules/netfilter.mk

@@ -495,7 +495,7 @@ $(eval $(call KernelPackage,ipt-tproxy))
 
 define KernelPackage/ipt-tee
   TITLE:=TEE support
-  DEPENDS:=+kmod-ipt-conntrack @!LINUX_4_4
+  DEPENDS:=+kmod-ipt-conntrack
   KCONFIG:= \
   	CONFIG_NETFILTER_XT_TARGET_TEE
   FILES:= \

package/kernel/linux/modules/nls.mk

@@ -147,6 +147,38 @@ endef
 $(eval $(call KernelPackage,nls-cp932))
 
 
+define KernelPackage/nls-cp936
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 936 (Simplified Chinese)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_936
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp936.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp936)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp936/description
+  Kernel module for NLS Codepage 936 (Simplified Chinese)
+endef
+
+$(eval $(call KernelPackage,nls-cp936))
+
+
+define KernelPackage/nls-cp950
+  SUBMENU:=Native Language Support
+  TITLE:=Codepage 950 (Traditional Chinese)
+  KCONFIG:=CONFIG_NLS_CODEPAGE_950
+  FILES:=$(LINUX_DIR)/fs/nls/nls_cp950.ko
+  AUTOLOAD:=$(call AutoLoad,25,nls_cp950)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/nls-cp950/description
+  Kernel module for NLS Codepage 950 (Traditional Chinese)
+endef
+
+$(eval $(call KernelPackage,nls-cp950))
+
+
 define KernelPackage/nls-cp1250
   SUBMENU:=Native Language Support
   TITLE:=Codepage 1250 (Eastern Europe)

package/kernel/linux/modules/sound.mk

@@ -67,7 +67,7 @@ define KernelPackage/sound-core/uml
   FILES:= \
 	$(LINUX_DIR)/sound/soundcore.ko \
 	$(LINUX_DIR)/arch/um/drivers/hostaudio.ko
-  AUTOLOAD:=$(call AutoLoad,30,soundcore hostaudio)
+  AUTOLOAD+=$(call AutoLoad,30,soundcore hostaudio)
 endef
 
 define KernelPackage/sound-core/description

package/kernel/linux/modules/video.mk

@@ -47,7 +47,7 @@ define KernelPackage/backlight-pwm
 	AUTOLOAD:=$(call AutoProbe,video pwm_bl)
 endef
 
-define KernelPackage/backlight/backlight-pwm
+define KernelPackage/backlight-pwm/description
 	Kernel module for PWM based Backlight support.
 endef
 
@@ -72,7 +72,7 @@ endef
 
 define KernelPackage/fb/x86
   FILES+=$(LINUX_DIR)/arch/x86/video/fbdev.ko
-  AUTOLOAD:=$(call AutoLoad,06,fbdev fb)
+  AUTOLOAD+=$(call AutoLoad,06,fbdev fb)
 endef
 
 $(eval $(call KernelPackage,fb))

package/kernel/mac80211/Makefile

@@ -10,13 +10,13 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=2016-10-08
-PKG_RELEASE:=1
+PKG_VERSION:=2017-01-31
+PKG_RELEASE:=2
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
 PKG_BACKPORT_VERSION:=
-PKG_HASH:=4f6350e3b75815060bfdf47ef266ad613c7bfea5b7b1dc4552dee69e1bebe4fb
+PKG_HASH:=75e6d39e34cf156212a2509172a4a62b673b69eb4a1d9aaa565f7fa719fa2317
 
-PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2
+PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.xz
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
 PKG_BUILD_PARALLEL:=1
 
@@ -35,7 +35,7 @@ PKG_DRIVERS = \
 	libertas-sdio libertas-usb libertas-spi \
 	mac80211-hwsim \
 	mt7601u \
-	mwl8k mwifiex-pcie \
+	mwl8k mwifiex-pcie mwifiex-sdio \
 	p54-common p54-pci p54-spi p54-usb \
 	rt2x00-lib rt2x00-pci rt2x00-usb \
 	rt2400-pci rt2500-pci rt2500-usb \
@@ -68,6 +68,8 @@ PKG_CONFIG_DEPENDS:= \
 	CONFIG_PACKAGE_BRCM80211_DEBUG \
 	CONFIG_PACKAGE_IWLWIFI_DEBUG \
 	CONFIG_PACKAGE_IWLWIFI_DEBUGFS \
+	CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS \
+	CONFIG_PACKAGE_RT2X00_DEBUG \
 	CONFIG_PACKAGE_RTLWIFI_DEBUG \
 	CONFIG_ATH9K_SUPPORT_PCOEM \
 	CONFIG_ATH9K_TX99 \
@@ -248,7 +250,7 @@ define KernelPackage/ath9k/config
 		depends on PACKAGE_kmod-ath9k
 
        config ATH9K_TX99
-               bool "Enable TX99 support"
+               bool "Enable TX99 support (WARNING: testing only, breaks normal operation!)"
                depends on PACKAGE_kmod-ath9k
 
 	config ATH9K_UBNTHSR
@@ -1022,7 +1024,7 @@ endef
 define KernelPackage/mac80211-hwsim
   $(call KernelPackage/mac80211/Default)
   TITLE:=mac80211 HW simulation device
-  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT
+  DEPENDS+= +kmod-mac80211 +@DRIVER_11AC_SUPPORT +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko
   AUTOLOAD:=$(call AutoProbe,mac80211_hwsim)
 endef
@@ -1055,7 +1057,7 @@ define KernelPackage/mwifiex-pcie
   $(call KernelPackage/mac80211/Default)
   TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards
   URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
-  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwifiex-pcie-firmware
+  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-pcie-firmware
   FILES:= \
 	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \
 	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_pcie.ko
@@ -1066,6 +1068,21 @@ define KernelPackage/mwifiex-pcie/description
  Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards
 endef
 
+define KernelPackage/mwifiex-sdio
+  $(call KernelPackage/mac80211/Default)
+  TITLE:=Driver for Marvell 802.11n/802.11ac SDIO Wireless cards
+  URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
+  DEPENDS+= +kmod-mmc +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-sdio-firmware
+  FILES:= \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_sdio.ko
+  AUTOLOAD:=$(call AutoProbe,mwifiex_sdio)
+endef
+
+define KernelPackage/mwifiex-sdio/description
+ Kernel modules for Marvell 802.11n/802.11ac SDIO Wireless cards
+endef
+
 define KernelPackage/p54/Default
   $(call KernelPackage/mac80211/Default)
   TITLE:=Prism54 Drivers
@@ -1598,6 +1615,7 @@ config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB
 config-$(call config_package,libertas-spi) += LIBERTAS LIBERTAS_SPI
 config-$(call config_package,mwl8k) += MWL8K
 config-$(call config_package,mwifiex-pcie) += MWIFIEX MWIFIEX_PCIE
+config-$(call config_package,mwifiex-sdio) += MWIFIEX MWIFIEX_SDIO
 config-$(call config_package,rtl8180) += RTL8180
 config-$(call config_package,rtl8187) += RTL8187
 config-$(call config_package,wlcore) += WLCORE WLCORE_SDIO
@@ -1793,6 +1811,7 @@ $(eval $(call KernelPackage,mac80211-hwsim))
 $(eval $(call KernelPackage,mt7601u))
 $(eval $(call KernelPackage,mwl8k))
 $(eval $(call KernelPackage,mwifiex-pcie))
+$(eval $(call KernelPackage,mwifiex-sdio))
 $(eval $(call KernelPackage,p54-common))
 $(eval $(call KernelPackage,p54-pci))
 $(eval $(call KernelPackage,p54-usb))

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -268,7 +268,7 @@ mac80211_hostapd_setup_base() {
 			vht_max_mpdu_hw=11454
 		[ "$vht_max_mpdu_hw" != 3895 ] && \
 			vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]"
-			
+
 		# maximum A-MPDU length exponent
 		vht_max_a_mpdu_len_exp_hw=0
 		[ "$(($vht_cap & 58720256))" -ge 8388608 -a 1 -le "$vht_max_a_mpdu_len_exp" ] && \
@@ -566,7 +566,7 @@ mac80211_setup_adhoc() {
 	[ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
 
 	iw dev "$ifname" ibss join "$ssid" $freq $ibss_htmode fixed-freq $bssid \
-		${beacon_int:+beacon-interval $beacon_int} \
+		beacon-interval $beacon_int \
 		${brstr:+basic-rates $brstr} \
 		${mcval:+mcast-rate $mcval} \
 		${keyspec:+keys $keyspec}
@@ -646,7 +646,9 @@ mac80211_setup_vif() {
 				esac
 
 				freq="$(get_freq "$phy" "$channel")"
-				iw dev "$ifname" mesh join "$mesh_id" freq $freq $mesh_htmode ${mcval:+mcast-rate $mcval}
+				iw dev "$ifname" mesh join "$mesh_id" freq $freq $mesh_htmode \
+					${mcval:+mcast-rate $mcval} \
+					beacon-interval $beacon_int
 			fi
 
 			for var in $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING; do
@@ -698,7 +700,7 @@ drv_mac80211_setup() {
 		country chanbw distance \
 		txpower antenna_gain \
 		rxantenna txantenna \
-		frag rts beacon_int htmode
+		frag rts beacon_int:100 htmode
 	json_get_values basic_rate_list basic_rate
 	json_select ..
 

package/kernel/mac80211/patches/002-change_allconfig.patch

@@ -1,6 +1,6 @@
 --- a/kconf/conf.c
 +++ b/kconf/conf.c
-@@ -593,40 +593,12 @@ int main(int ac, char **av)
+@@ -594,40 +594,12 @@ int main(int ac, char **av)
  	case oldconfig:
  	case listnewconfig:
  	case olddefconfig:
@@ -44,7 +44,7 @@
  		break;
 --- a/kconf/confdata.c
 +++ b/kconf/confdata.c
-@@ -1169,6 +1169,8 @@ bool conf_set_all_new_symbols(enum conf_
+@@ -1170,6 +1170,8 @@ bool conf_set_all_new_symbols(enum conf_
  	}
  	bool has_changed = false;
  
@@ -53,7 +53,7 @@
  	for_all_symbols(i, sym) {
  		if (sym_has_value(sym) || (sym->flags & SYMBOL_VALID))
  			continue;
-@@ -1212,8 +1214,6 @@ bool conf_set_all_new_symbols(enum conf_
+@@ -1213,8 +1215,6 @@ bool conf_set_all_new_symbols(enum conf_
  
  	}
  

package/kernel/mac80211/patches/004-fix_duplicate_skcipher_backport.patch

@@ -1,11 +0,0 @@
---- a/compat/Makefile
-+++ b/compat/Makefile
-@@ -35,8 +35,6 @@ compat-$(CPTCFG_KERNEL_4_6) += backport-
- 
- compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o
- compat-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += crypto-skcipher.o
--skcipher-objs += crypto-skcipher.o
--obj-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += skcipher.o
- compat-$(CPTCFG_BPAUTO_BUILD_WANT_DEV_COREDUMP) += drivers-base-devcoredump.o
- compat-$(CPTCFG_BPAUTO_RHASHTABLE) += lib-rhashtable.o
- cordic-objs += lib-cordic.o

package/kernel/mac80211/patches/004-kconfig_backport_fix.patch

@@ -0,0 +1,28 @@
+--- a/backport-include/linux/kconfig.h
++++ b/backport-include/linux/kconfig.h
+@@ -5,6 +5,8 @@
+ #include_next <linux/kconfig.h>
+ #endif
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)
++
+ #ifndef __ARG_PLACEHOLDER_1
+ #define __ARG_PLACEHOLDER_1 0,
+ #define config_enabled(cfg) _config_enabled(cfg)
+@@ -16,6 +18,7 @@
+  * 3.1 - 3.3 had a broken version of this, so undef
+  * (they didn't have __ARG_PLACEHOLDER_1)
+  */
++
+ #undef IS_ENABLED
+ #define IS_ENABLED(option) \
+         (config_enabled(option) || config_enabled(option##_MODULE))
+@@ -24,6 +27,8 @@
+ #undef IS_BUILTIN
+ #define IS_BUILTIN(option) config_enabled(option)
+ 
++#endif
++
+ #ifndef IS_REACHABLE
+ /*
+  * IS_REACHABLE(CONFIG_FOO) evaluates to 1 if the currently compiled

package/kernel/mac80211/patches/005-backport_skb_get_hash_perturb.patch

@@ -1,22 +0,0 @@
---- a/backport-include/linux/skbuff.h
-+++ b/backport-include/linux/skbuff.h
-@@ -305,6 +305,19 @@ static inline void skb_free_frag(void *d
- {
- 	put_page(virt_to_head_page(data));
- }
-+
-+#include <net/flow_keys.h>
-+#include <linux/jhash.h>
-+
-+static inline u32 skb_get_hash_perturb(struct sk_buff *skb, u32 key)
-+{
-+	struct flow_keys keys;
-+
-+	skb_flow_dissect(skb, &keys);
-+	return jhash_3words((__force u32)keys.dst,
-+			    (__force u32)keys.src ^ keys.ip_proto,
-+			    (__force u32)keys.ports, key);
-+}
- #endif
- 
- #endif /* __BACKPORT_SKBUFF_H */

package/kernel/mac80211/patches/005-revert-devcoredump.patch

@@ -0,0 +1,152 @@
+--- a/compat/Makefile
++++ b/compat/Makefile
+@@ -35,8 +35,6 @@ compat-$(CPTCFG_KERNEL_4_6) += backport-
+ 
+ compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o
+ compat-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += crypto-skcipher.o
+-skcipher-objs += crypto-skcipher.o
+-obj-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += skcipher.o
+ compat-$(CPTCFG_BPAUTO_BUILD_WANT_DEV_COREDUMP) += drivers-base-devcoredump.o
+ compat-$(CPTCFG_BPAUTO_RHASHTABLE) += lib-rhashtable.o
+ cordic-objs += lib-cordic.o
+--- a/compat/drivers-base-devcoredump.c
++++ b/compat/drivers-base-devcoredump.c
+@@ -31,6 +31,7 @@
+ #include <linux/slab.h>
+ #include <linux/fs.h>
+ #include <linux/workqueue.h>
++#include "backports.h"
+ 
+ static struct class devcd_class;
+ 
+@@ -40,6 +41,10 @@ static bool devcd_disabled;
+ /* if data isn't read by userspace after 5 minutes then delete it */
+ #define DEVCD_TIMEOUT	(HZ * 60 * 5)
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)
++static struct bin_attribute devcd_attr_data;
++#endif
++
+ struct devcd_entry {
+ 	struct device devcd_dev;
+ 	void *data;
+@@ -69,8 +74,7 @@ static void devcd_dev_release(struct dev
+ 	 * a struct device to know when it goes away?
+ 	 */
+ 	if (devcd->failing_dev->kobj.sd)
+-		sysfs_delete_link(&devcd->failing_dev->kobj, &dev->kobj,
+-				  "devcoredump");
++		sysfs_remove_link(&devcd->failing_dev->kobj, "devcoredump");
+ 
+ 	put_device(devcd->failing_dev);
+ 	kfree(devcd);
+@@ -82,6 +86,9 @@ static void devcd_del(struct work_struct
+ 
+ 	devcd = container_of(wk, struct devcd_entry, del_wk.work);
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)
++	device_remove_bin_file(&devcd->devcd_dev, &devcd_attr_data);
++#endif
+ 	device_del(&devcd->devcd_dev);
+ 	put_device(&devcd->devcd_dev);
+ }
+@@ -115,6 +122,7 @@ static struct bin_attribute devcd_attr_d
+ 	.write = devcd_data_write,
+ };
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0)
+ static struct bin_attribute *devcd_dev_bin_attrs[] = {
+ 	&devcd_attr_data, NULL,
+ };
+@@ -126,6 +134,7 @@ static const struct attribute_group devc
+ static const struct attribute_group *devcd_dev_groups[] = {
+ 	&devcd_dev_group, NULL,
+ };
++#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0) */
+ 
+ static int devcd_free(struct device *dev, void *data)
+ {
+@@ -160,18 +169,11 @@ static ssize_t disabled_store(struct cla
+ 
+ 	return count;
+ }
+-static CLASS_ATTR_RW(disabled);
+ 
+-static struct attribute *devcd_class_attrs[] = {
+-	&class_attr_disabled.attr,
+-	NULL,
++static struct class_attribute devcd_class_attrs[] = {
++	__ATTR_RW(disabled),
++	__ATTR_NULL
+ };
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0)
+-ATTRIBUTE_GROUPS(devcd_class);
+-#else
+-#define BP_ATTR_GRP_STRUCT device_attribute
+-ATTRIBUTE_GROUPS_BACKPORT(devcd_class);
+-#endif
+ 
+ static struct class devcd_class = {
+ 	.name		= "devcoredump",
+@@ -179,10 +181,8 @@ static struct class devcd_class = {
+ 	.dev_release	= devcd_dev_release,
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0)
+ 	.dev_groups	= devcd_dev_groups,
+-#else
+-	.dev_attrs = devcd_class_dev_attrs,
+ #endif
+-	.class_groups	= devcd_class_groups,
++	.class_attrs	= devcd_class_attrs,
+ };
+ 
+ static ssize_t devcd_readv(char *buffer, loff_t offset, size_t count,
+@@ -325,6 +325,11 @@ void dev_coredumpm(struct device *dev, s
+ 	if (device_add(&devcd->devcd_dev))
+ 		goto put_device;
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)
++	if (device_create_bin_file(&devcd->devcd_dev, &devcd_attr_data))
++		goto put_device;
++#endif
++
+ 	if (sysfs_create_link(&devcd->devcd_dev.kobj, &dev->kobj,
+ 			      "failing_device"))
+ 		/* nothing - symlink will be missing */;
+@@ -367,16 +372,13 @@ void dev_coredumpsg(struct device *dev,
+ }
+ EXPORT_SYMBOL_GPL(dev_coredumpsg);
+ 
+-static int __init devcoredump_init(void)
++int __init devcoredump_init(void)
+ {
+-	init_devcd_class_attrs();
+ 	return class_register(&devcd_class);
+ }
+-__initcall(devcoredump_init);
+ 
+-static void __exit devcoredump_exit(void)
++void __exit devcoredump_exit(void)
+ {
+ 	class_for_each_device(&devcd_class, NULL, NULL, devcd_free);
+ 	class_unregister(&devcd_class);
+ }
+-__exitcall(devcoredump_exit);
+--- a/include/linux/backport-devcoredump.h
++++ b/include/linux/backport-devcoredump.h
+@@ -66,7 +66,7 @@ static inline void _devcd_free_sgtable(s
+ }
+ 
+ 
+-#ifdef CONFIG_DEV_COREDUMP
++#ifdef CPTCFG_BPAUTO_WANT_DEV_COREDUMP
+ void dev_coredumpv(struct device *dev, void *data, size_t datalen,
+ 		   gfp_t gfp);
+ 
+@@ -100,6 +100,6 @@ static inline void dev_coredumpsg(struct
+ {
+ 	_devcd_free_sgtable(table);
+ }
+-#endif /* CONFIG_DEV_COREDUMP */
++#endif /* CPTCFG_BPAUTO_WANT_DEV_COREDUMP */
+ 
+ #endif /* __DEVCOREDUMP_H */

package/kernel/mac80211/patches/006-revert-ktime-changes.patch

@@ -0,0 +1,20 @@
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
+@@ -177,7 +177,7 @@ static bool rt2800usb_tx_sta_fifo_read_c
+ 	if (rt2800usb_txstatus_pending(rt2x00dev)) {
+ 		/* Read register after 1 ms */
+ 		hrtimer_start(&rt2x00dev->txstatus_timer,
+-			      TXSTATUS_READ_INTERVAL,
++			      ktime_set(0, TXSTATUS_READ_INTERVAL),
+ 			      HRTIMER_MODE_REL);
+ 		return false;
+ 	}
+@@ -204,7 +204,7 @@ static void rt2800usb_async_read_tx_stat
+ 
+ 	/* Read TX_STA_FIFO register after 2 ms */
+ 	hrtimer_start(&rt2x00dev->txstatus_timer,
+-		      2 * TXSTATUS_READ_INTERVAL,
++		      ktime_set(0, 2*TXSTATUS_READ_INTERVAL),
+ 		      HRTIMER_MODE_REL);
+ }
+ 

package/kernel/mac80211/patches/007-revert-genetlink-changes.patch

@@ -0,0 +1,266 @@
+--- a/net/wireless/nl80211.c
++++ b/net/wireless/nl80211.c
+@@ -32,8 +32,22 @@ static int nl80211_crypto_settings(struc
+ 				   struct cfg80211_crypto_settings *settings,
+ 				   int cipher_limit);
+ 
++static int nl80211_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
++			    struct genl_info *info);
++static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
++			      struct genl_info *info);
++
+ /* the netlink family */
+-static struct genl_family nl80211_fam;
++static struct genl_family nl80211_fam = {
++	.id = GENL_ID_GENERATE,		/* don't bother with a hardcoded ID */
++	.name = NL80211_GENL_NAME,	/* have users key off the name instead */
++	.hdrsize = 0,			/* no private header */
++	.version = 1,			/* no particular meaning now */
++	.maxattr = NL80211_ATTR_MAX,
++	.netnsok = true,
++	.pre_doit = nl80211_pre_doit,
++	.post_doit = nl80211_post_doit,
++};
+ 
+ /* multicast groups */
+ enum nl80211_multicast_groups {
+@@ -549,14 +563,13 @@ static int nl80211_prepare_wdev_dump(str
+ 
+ 	if (!cb->args[0]) {
+ 		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+-				  genl_family_attrbuf(&nl80211_fam),
+-				  nl80211_fam.maxattr, nl80211_policy);
++				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
++				  nl80211_policy);
+ 		if (err)
+ 			goto out_unlock;
+ 
+-		*wdev = __cfg80211_wdev_from_attrs(
+-					sock_net(skb->sk),
+-					genl_family_attrbuf(&nl80211_fam));
++		*wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk),
++						   nl80211_fam.attrbuf);
+ 		if (IS_ERR(*wdev)) {
+ 			err = PTR_ERR(*wdev);
+ 			goto out_unlock;
+@@ -1903,7 +1916,7 @@ static int nl80211_dump_wiphy_parse(stru
+ 				    struct netlink_callback *cb,
+ 				    struct nl80211_dump_wiphy_state *state)
+ {
+-	struct nlattr **tb = genl_family_attrbuf(&nl80211_fam);
++	struct nlattr **tb = nl80211_fam.attrbuf;
+ 	int ret = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+ 			      tb, nl80211_fam.maxattr, nl80211_policy);
+ 	/* ignore parse errors for backward compatibility */
+@@ -7733,7 +7746,6 @@ static int nl80211_send_survey(struct sk
+ 
+ static int nl80211_dump_survey(struct sk_buff *skb, struct netlink_callback *cb)
+ {
+-	struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
+ 	struct survey_info survey;
+ 	struct cfg80211_registered_device *rdev;
+ 	struct wireless_dev *wdev;
+@@ -7746,7 +7758,7 @@ static int nl80211_dump_survey(struct sk
+ 		return res;
+ 
+ 	/* prepare_wdev_dump parsed the attributes */
+-	radio_stats = attrbuf[NL80211_ATTR_SURVEY_RADIO_STATS];
++	radio_stats = nl80211_fam.attrbuf[NL80211_ATTR_SURVEY_RADIO_STATS];
+ 
+ 	if (!wdev->netdev) {
+ 		res = -EINVAL;
+@@ -8594,14 +8606,14 @@ static int nl80211_testmode_dump(struct
+ 		 */
+ 		phy_idx = cb->args[0] - 1;
+ 	} else {
+-		struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
+-
+ 		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+-				  attrbuf, nl80211_fam.maxattr, nl80211_policy);
++				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
++				  nl80211_policy);
+ 		if (err)
+ 			goto out_err;
+ 
+-		rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), attrbuf);
++		rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk),
++						  nl80211_fam.attrbuf);
+ 		if (IS_ERR(rdev)) {
+ 			err = PTR_ERR(rdev);
+ 			goto out_err;
+@@ -8609,8 +8621,9 @@ static int nl80211_testmode_dump(struct
+ 		phy_idx = rdev->wiphy_idx;
+ 		rdev = NULL;
+ 
+-		if (attrbuf[NL80211_ATTR_TESTDATA])
+-			cb->args[1] = (long)attrbuf[NL80211_ATTR_TESTDATA];
++		if (nl80211_fam.attrbuf[NL80211_ATTR_TESTDATA])
++			cb->args[1] =
++				(long)nl80211_fam.attrbuf[NL80211_ATTR_TESTDATA];
+ 	}
+ 
+ 	if (cb->args[1]) {
+@@ -10814,7 +10827,8 @@ static int handle_nan_filter(struct nlat
+ 
+ 	i = 0;
+ 	nla_for_each_nested(attr, attr_filter, rem) {
+-		filter[i].filter = nla_memdup(attr, GFP_KERNEL);
++		filter[i].filter = kmemdup(nla_data(attr), nla_len(attr),
++					   GFP_KERNEL);
+ 		filter[i].len = nla_len(attr);
+ 		i++;
+ 	}
+@@ -11450,7 +11464,6 @@ static int nl80211_prepare_vendor_dump(s
+ 				       struct cfg80211_registered_device **rdev,
+ 				       struct wireless_dev **wdev)
+ {
+-	struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
+ 	u32 vid, subcmd;
+ 	unsigned int i;
+ 	int vcmd_idx = -1;
+@@ -11486,28 +11499,31 @@ static int nl80211_prepare_vendor_dump(s
+ 	}
+ 
+ 	err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+-			  attrbuf, nl80211_fam.maxattr, nl80211_policy);
++			  nl80211_fam.attrbuf, nl80211_fam.maxattr,
++			  nl80211_policy);
+ 	if (err)
+ 		goto out_unlock;
+ 
+-	if (!attrbuf[NL80211_ATTR_VENDOR_ID] ||
+-	    !attrbuf[NL80211_ATTR_VENDOR_SUBCMD]) {
++	if (!nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_ID] ||
++	    !nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_SUBCMD]) {
+ 		err = -EINVAL;
+ 		goto out_unlock;
+ 	}
+ 
+-	*wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk), attrbuf);
++	*wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk),
++					   nl80211_fam.attrbuf);
+ 	if (IS_ERR(*wdev))
+ 		*wdev = NULL;
+ 
+-	*rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), attrbuf);
++	*rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk),
++					   nl80211_fam.attrbuf);
+ 	if (IS_ERR(*rdev)) {
+ 		err = PTR_ERR(*rdev);
+ 		goto out_unlock;
+ 	}
+ 
+-	vid = nla_get_u32(attrbuf[NL80211_ATTR_VENDOR_ID]);
+-	subcmd = nla_get_u32(attrbuf[NL80211_ATTR_VENDOR_SUBCMD]);
++	vid = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_ID]);
++	subcmd = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_SUBCMD]);
+ 
+ 	for (i = 0; i < (*rdev)->wiphy.n_vendor_commands; i++) {
+ 		const struct wiphy_vendor_command *vcmd;
+@@ -11531,9 +11547,9 @@ static int nl80211_prepare_vendor_dump(s
+ 		goto out_unlock;
+ 	}
+ 
+-	if (attrbuf[NL80211_ATTR_VENDOR_DATA]) {
+-		data = nla_data(attrbuf[NL80211_ATTR_VENDOR_DATA]);
+-		data_len = nla_len(attrbuf[NL80211_ATTR_VENDOR_DATA]);
++	if (nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]) {
++		data = nla_data(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]);
++		data_len = nla_len(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]);
+ 	}
+ 
+ 	/* 0 is the first index - add 1 to parse only once */
+@@ -12795,21 +12811,6 @@ static __genl_const struct genl_ops nl80
+ 	},
+ };
+ 
+-static struct genl_family nl80211_fam __ro_after_init = {
+-	.name = NL80211_GENL_NAME,	/* have users key off the name instead */
+-	.hdrsize = 0,			/* no private header */
+-	.version = 1,			/* no particular meaning now */
+-	.maxattr = NL80211_ATTR_MAX,
+-	.netnsok = true,
+-	.pre_doit = nl80211_pre_doit,
+-	.post_doit = nl80211_post_doit,
+-	.module = THIS_MODULE,
+-	.ops = nl80211_ops,
+-	.n_ops = ARRAY_SIZE(nl80211_ops),
+-	.mcgrps = nl80211_mcgrps,
+-	.n_mcgrps = ARRAY_SIZE(nl80211_mcgrps),
+-};
+-
+ /* notification functions */
+ 
+ void nl80211_notify_wiphy(struct cfg80211_registered_device *rdev,
+@@ -14759,11 +14760,12 @@ void nl80211_send_ap_stopped(struct wire
+ 
+ /* initialisation/exit functions */
+ 
+-int __init nl80211_init(void)
++int nl80211_init(void)
+ {
+ 	int err;
+ 
+-	err = genl_register_family(&nl80211_fam);
++	err = genl_register_family_with_ops_groups(&nl80211_fam, nl80211_ops,
++						   nl80211_mcgrps);
+ 	if (err)
+ 		return err;
+ 
+--- a/drivers/net/wireless/mac80211_hwsim.c
++++ b/drivers/net/wireless/mac80211_hwsim.c
+@@ -587,8 +587,15 @@ struct hwsim_radiotap_ack_hdr {
+ 	__le16 rt_chbitmask;
+ } __packed;
+ 
+-/* MAC80211_HWSIM netlink family */
+-static struct genl_family hwsim_genl_family;
++/* MAC80211_HWSIM netlinf family */
++static struct genl_family hwsim_genl_family = {
++	.id = GENL_ID_GENERATE,
++	.hdrsize = 0,
++	.name = "MAC80211_HWSIM",
++	.version = 1,
++	.maxattr = HWSIM_ATTR_MAX,
++	.netnsok = true,
++};
+ 
+ enum hwsim_multicast_groups {
+ 	HWSIM_MCGRP_CONFIG,
+@@ -3250,18 +3257,6 @@ static __genl_const struct genl_ops hwsi
+ 	},
+ };
+ 
+-static struct genl_family hwsim_genl_family __ro_after_init = {
+-	.name = "MAC80211_HWSIM",
+-	.version = 1,
+-	.maxattr = HWSIM_ATTR_MAX,
+-	.netnsok = true,
+-	.module = THIS_MODULE,
+-	.ops = hwsim_ops,
+-	.n_ops = ARRAY_SIZE(hwsim_ops),
+-	.mcgrps = hwsim_mcgrps,
+-	.n_mcgrps = ARRAY_SIZE(hwsim_mcgrps),
+-};
+-
+ static void destroy_radio(struct work_struct *work)
+ {
+ 	struct mac80211_hwsim_data *data =
+@@ -3309,13 +3304,15 @@ static struct notifier_block hwsim_netli
+ 	.notifier_call = mac80211_hwsim_netlink_notify,
+ };
+ 
+-static int __init hwsim_init_netlink(void)
++static int hwsim_init_netlink(void)
+ {
+ 	int rc;
+ 
+ 	printk(KERN_INFO "mac80211_hwsim: initializing netlink\n");
+ 
+-	rc = genl_register_family(&hwsim_genl_family);
++	rc = genl_register_family_with_ops_groups(&hwsim_genl_family,
++						  hwsim_ops,
++						  hwsim_mcgrps);
+ 	if (rc)
+ 		goto failure;
+ 

package/kernel/mac80211/patches/008-revert-ndo_stats64-cleanup.patch

@@ -0,0 +1,20 @@
+--- a/net/mac80211/iface.c
++++ b/net/mac80211/iface.c
+@@ -1133,7 +1133,7 @@ static u16 ieee80211_netdev_select_queue
+ 	return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
+ }
+ 
+-static void
++static struct rtnl_link_stats64 *
+ ieee80211_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
+ {
+ 	int i;
+@@ -1158,6 +1158,8 @@ ieee80211_get_stats64(struct net_device
+ 		stats->rx_bytes   += rx_bytes;
+ 		stats->tx_bytes   += tx_bytes;
+ 	}
++
++	return stats;
+ }
+ 
+ static const struct net_device_ops ieee80211_dataif_ops = {

package/kernel/mac80211/patches/009-revert-mtu-changes.patch

@@ -0,0 +1,338 @@
+--- a/net/mac80211/iface.c
++++ b/net/mac80211/iface.c
+@@ -151,6 +151,15 @@ void ieee80211_recalc_idle(struct ieee80
+ 		ieee80211_hw_config(local, change);
+ }
+ 
++static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
++{
++	if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN)
++		return -EINVAL;
++
++	dev->mtu = new_mtu;
++	return 0;
++}
++
+ static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr,
+ 				bool check_dup)
+ {
+@@ -1168,6 +1177,7 @@ static const struct net_device_ops ieee8
+ 	.ndo_uninit		= ieee80211_uninit,
+ 	.ndo_start_xmit		= ieee80211_subif_start_xmit,
+ 	.ndo_set_rx_mode	= ieee80211_set_multicast_list,
++	.ndo_change_mtu 	= ieee80211_change_mtu,
+ 	.ndo_set_mac_address 	= ieee80211_change_mac,
+ 	.ndo_select_queue	= ieee80211_netdev_select_queue,
+ 	.ndo_get_stats64	= ieee80211_get_stats64,
+@@ -1211,6 +1221,7 @@ static const struct net_device_ops ieee8
+ 	.ndo_uninit		= ieee80211_uninit,
+ 	.ndo_start_xmit		= ieee80211_monitor_start_xmit,
+ 	.ndo_set_rx_mode	= ieee80211_set_multicast_list,
++	.ndo_change_mtu 	= ieee80211_change_mtu,
+ 	.ndo_set_mac_address 	= ieee80211_change_mac,
+ 	.ndo_select_queue	= ieee80211_monitor_select_queue,
+ 	.ndo_get_stats64	= ieee80211_get_stats64,
+@@ -1919,10 +1930,6 @@ int ieee80211_if_add(struct ieee80211_lo
+ 
+ 		netdev_set_default_ethtool_ops(ndev, &ieee80211_ethtool_ops);
+ 
+-		/* MTU range: 256 - 2304 */
+-		ndev->min_mtu = 256;
+-		ndev->max_mtu = IEEE80211_MAX_DATA_LEN;
+-
+ 		ret = register_netdevice(ndev);
+ 		if (ret) {
+ 			ieee80211_if_free(ndev);
+--- a/drivers/net/wireless/ath/wil6210/netdev.c
++++ b/drivers/net/wireless/ath/wil6210/netdev.c
+@@ -42,6 +42,21 @@ static int wil_stop(struct net_device *n
+ 	return wil_down(wil);
+ }
+ 
++static int wil_change_mtu(struct net_device *ndev, int new_mtu)
++{
++	struct wil6210_priv *wil = ndev_to_wil(ndev);
++
++	if (new_mtu < 68 || new_mtu > mtu_max) {
++		wil_err(wil, "invalid MTU %d\n", new_mtu);
++		return -EINVAL;
++	}
++
++	wil_dbg_misc(wil, "change MTU %d -> %d\n", ndev->mtu, new_mtu);
++	ndev->mtu = new_mtu;
++
++	return 0;
++}
++
+ static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
+ {
+ 	struct wil6210_priv *wil = ndev_to_wil(ndev);
+@@ -55,6 +70,7 @@ static const struct net_device_ops wil_n
+ 	.ndo_start_xmit		= wil_start_xmit,
+ 	.ndo_set_mac_address	= eth_mac_addr,
+ 	.ndo_validate_addr	= eth_validate_addr,
++	.ndo_change_mtu		= wil_change_mtu,
+ 	.ndo_do_ioctl		= wil_do_ioctl,
+ };
+ 
+@@ -111,7 +127,6 @@ static int wil6210_netdev_poll_tx(struct
+ static void wil_dev_setup(struct net_device *dev)
+ {
+ 	ether_setup(dev);
+-	dev->max_mtu = mtu_max;
+ 	dev->tx_queue_len = WIL_TX_Q_LEN_DEFAULT;
+ }
+ 
+--- a/drivers/net/wireless/atmel/atmel.c
++++ b/drivers/net/wireless/atmel/atmel.c
+@@ -1295,6 +1295,14 @@ static struct iw_statistics *atmel_get_w
+ 	return &priv->wstats;
+ }
+ 
++static int atmel_change_mtu(struct net_device *dev, int new_mtu)
++{
++	if ((new_mtu < 68) || (new_mtu > 2312))
++		return -EINVAL;
++	dev->mtu = new_mtu;
++	return 0;
++}
++
+ static int atmel_set_mac_address(struct net_device *dev, void *p)
+ {
+ 	struct sockaddr *addr = p;
+@@ -1498,6 +1506,7 @@ static const struct file_operations atme
+ static const struct net_device_ops atmel_netdev_ops = {
+ 	.ndo_open 		= atmel_open,
+ 	.ndo_stop		= atmel_close,
++	.ndo_change_mtu 	= atmel_change_mtu,
+ 	.ndo_set_mac_address 	= atmel_set_mac_address,
+ 	.ndo_start_xmit 	= start_tx,
+ 	.ndo_do_ioctl 		= atmel_ioctl,
+@@ -1591,10 +1600,6 @@ struct net_device *init_atmel_card(unsig
+ 	dev->irq = irq;
+ 	dev->base_addr = port;
+ 
+-	/* MTU range: 68 - 2312 */
+-	dev->min_mtu = 68;
+-	dev->max_mtu = MAX_WIRELESS_BODY - ETH_FCS_LEN;
+-
+ 	SET_NETDEV_DEV(dev, sys_dev);
+ 
+ 	if ((rc = request_irq(dev->irq, service_interrupt, IRQF_SHARED, dev->name, dev))) {
+--- a/drivers/net/wireless/cisco/airo.c
++++ b/drivers/net/wireless/cisco/airo.c
+@@ -2329,6 +2329,14 @@ static int airo_set_mac_address(struct n
+ 	return 0;
+ }
+ 
++static int airo_change_mtu(struct net_device *dev, int new_mtu)
++{
++	if ((new_mtu < 68) || (new_mtu > 2400))
++		return -EINVAL;
++	dev->mtu = new_mtu;
++	return 0;
++}
++
+ static LIST_HEAD(airo_devices);
+ 
+ static void add_airo_dev(struct airo_info *ai)
+@@ -2648,6 +2656,7 @@ static const struct net_device_ops airo1
+ 	.ndo_get_stats 		= airo_get_stats,
+ 	.ndo_set_mac_address	= airo_set_mac_address,
+ 	.ndo_do_ioctl		= airo_ioctl,
++	.ndo_change_mtu		= airo_change_mtu,
+ };
+ 
+ static void wifi_setup(struct net_device *dev)
+@@ -2659,8 +2668,6 @@ static void wifi_setup(struct net_device
+ 	dev->type               = ARPHRD_IEEE80211;
+ 	dev->hard_header_len    = ETH_HLEN;
+ 	dev->mtu                = AIRO_DEF_MTU;
+-	dev->min_mtu            = 68;
+-	dev->max_mtu            = MIC_MSGLEN_MAX;
+ 	dev->addr_len           = ETH_ALEN;
+ 	dev->tx_queue_len       = 100; 
+ 
+@@ -2747,6 +2754,7 @@ static const struct net_device_ops airo_
+ 	.ndo_set_rx_mode	= airo_set_multicast_list,
+ 	.ndo_set_mac_address	= airo_set_mac_address,
+ 	.ndo_do_ioctl		= airo_ioctl,
++	.ndo_change_mtu		= airo_change_mtu,
+ 	.ndo_validate_addr	= eth_validate_addr,
+ };
+ 
+@@ -2758,6 +2766,7 @@ static const struct net_device_ops mpi_n
+ 	.ndo_set_rx_mode	= airo_set_multicast_list,
+ 	.ndo_set_mac_address	= airo_set_mac_address,
+ 	.ndo_do_ioctl		= airo_ioctl,
++	.ndo_change_mtu		= airo_change_mtu,
+ 	.ndo_validate_addr	= eth_validate_addr,
+ };
+ 
+@@ -2813,7 +2822,6 @@ static struct net_device *_init_airo_car
+ 	dev->irq = irq;
+ 	dev->base_addr = port;
+ 	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+-	dev->max_mtu = MIC_MSGLEN_MAX;
+ 
+ 	SET_NETDEV_DEV(dev, dmdev);
+ 
+--- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c
++++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
+@@ -6039,6 +6039,7 @@ static const struct net_device_ops ipw21
+ 	.ndo_open		= ipw2100_open,
+ 	.ndo_stop		= ipw2100_close,
+ 	.ndo_start_xmit		= libipw_xmit,
++	.ndo_change_mtu		= libipw_change_mtu,
+ 	.ndo_tx_timeout		= ipw2100_tx_timeout,
+ 	.ndo_set_mac_address	= ipw2100_set_address,
+ 	.ndo_validate_addr	= eth_validate_addr,
+@@ -6074,8 +6075,6 @@ static struct net_device *ipw2100_alloc_
+ 	dev->wireless_data = &priv->wireless_data;
+ 	dev->watchdog_timeo = 3 * HZ;
+ 	dev->irq = 0;
+-	dev->min_mtu = 68;
+-	dev->max_mtu = LIBIPW_DATA_LEN;
+ 
+ 	/* NOTE: We don't use the wireless_handlers hook
+ 	 * in dev as the system will start throwing WX requests
+--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
++++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
+@@ -11561,6 +11561,7 @@ static const struct net_device_ops ipw_p
+ 	.ndo_open 		= ipw_prom_open,
+ 	.ndo_stop		= ipw_prom_stop,
+ 	.ndo_start_xmit		= ipw_prom_hard_start_xmit,
++	.ndo_change_mtu		= libipw_change_mtu,
+ 	.ndo_set_mac_address 	= eth_mac_addr,
+ 	.ndo_validate_addr	= eth_validate_addr,
+ };
+@@ -11586,9 +11587,6 @@ static int ipw_prom_alloc(struct ipw_pri
+ 	priv->prom_net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
+ 	priv->prom_net_dev->netdev_ops = &ipw_prom_netdev_ops;
+ 
+-	priv->prom_net_dev->min_mtu = 68;
+-	priv->prom_net_dev->max_mtu = LIBIPW_DATA_LEN;
+-
+ 	priv->prom_priv->ieee->iw_mode = IW_MODE_MONITOR;
+ 	SET_NETDEV_DEV(priv->prom_net_dev, &priv->pci_dev->dev);
+ 
+@@ -11621,6 +11619,7 @@ static const struct net_device_ops ipw_n
+ 	.ndo_set_rx_mode	= ipw_net_set_multicast_list,
+ 	.ndo_set_mac_address	= ipw_net_set_mac_address,
+ 	.ndo_start_xmit		= libipw_xmit,
++	.ndo_change_mtu		= libipw_change_mtu,
+ 	.ndo_validate_addr	= eth_validate_addr,
+ };
+ 
+@@ -11730,9 +11729,6 @@ static int ipw_pci_probe(struct pci_dev
+ 	net_dev->wireless_handlers = &ipw_wx_handler_def;
+ 	net_dev->ethtool_ops = &ipw_ethtool_ops;
+ 
+-	net_dev->min_mtu = 68;
+-	net_dev->max_mtu = LIBIPW_DATA_LEN;
+-
+ 	err = sysfs_create_group(&pdev->dev.kobj, &ipw_attribute_group);
+ 	if (err) {
+ 		IPW_ERROR("failed to create sysfs device attributes\n");
+--- a/drivers/net/wireless/intel/ipw2x00/libipw.h
++++ b/drivers/net/wireless/intel/ipw2x00/libipw.h
+@@ -948,6 +948,7 @@ static inline int libipw_is_cck_rate(u8
+ /* libipw.c */
+ void free_libipw(struct net_device *dev, int monitor);
+ struct net_device *alloc_libipw(int sizeof_priv, int monitor);
++int libipw_change_mtu(struct net_device *dev, int new_mtu);
+ 
+ void libipw_networks_age(struct libipw_device *ieee, unsigned long age_secs);
+ 
+--- a/drivers/net/wireless/intel/ipw2x00/libipw_module.c
++++ b/drivers/net/wireless/intel/ipw2x00/libipw_module.c
+@@ -118,6 +118,15 @@ static void libipw_networks_initialize(s
+ 			      &ieee->network_free_list);
+ }
+ 
++int libipw_change_mtu(struct net_device *dev, int new_mtu)
++{
++	if ((new_mtu < 68) || (new_mtu > LIBIPW_DATA_LEN))
++		return -EINVAL;
++	dev->mtu = new_mtu;
++	return 0;
++}
++EXPORT_SYMBOL(libipw_change_mtu);
++
+ struct net_device *alloc_libipw(int sizeof_priv, int monitor)
+ {
+ 	struct libipw_device *ieee;
+--- a/drivers/net/wireless/intersil/hostap/hostap_main.c
++++ b/drivers/net/wireless/intersil/hostap/hostap_main.c
+@@ -765,6 +765,16 @@ static void hostap_set_multicast_list(st
+ }
+ 
+ 
++static int prism2_change_mtu(struct net_device *dev, int new_mtu)
++{
++	if (new_mtu < PRISM2_MIN_MTU || new_mtu > PRISM2_MAX_MTU)
++		return -EINVAL;
++
++	dev->mtu = new_mtu;
++	return 0;
++}
++
++
+ static void prism2_tx_timeout(struct net_device *dev)
+ {
+ 	struct hostap_interface *iface;
+@@ -803,6 +813,7 @@ static const struct net_device_ops hosta
+ 	.ndo_do_ioctl		= hostap_ioctl,
+ 	.ndo_set_mac_address	= prism2_set_mac_address,
+ 	.ndo_set_rx_mode	= hostap_set_multicast_list,
++	.ndo_change_mtu 	= prism2_change_mtu,
+ 	.ndo_tx_timeout 	= prism2_tx_timeout,
+ 	.ndo_validate_addr	= eth_validate_addr,
+ };
+@@ -815,6 +826,7 @@ static const struct net_device_ops hosta
+ 	.ndo_do_ioctl		= hostap_ioctl,
+ 	.ndo_set_mac_address	= prism2_set_mac_address,
+ 	.ndo_set_rx_mode	= hostap_set_multicast_list,
++	.ndo_change_mtu 	= prism2_change_mtu,
+ 	.ndo_tx_timeout 	= prism2_tx_timeout,
+ 	.ndo_validate_addr	= eth_validate_addr,
+ };
+@@ -827,6 +839,7 @@ static const struct net_device_ops hosta
+ 	.ndo_do_ioctl		= hostap_ioctl,
+ 	.ndo_set_mac_address	= prism2_set_mac_address,
+ 	.ndo_set_rx_mode	= hostap_set_multicast_list,
++	.ndo_change_mtu 	= prism2_change_mtu,
+ 	.ndo_tx_timeout 	= prism2_tx_timeout,
+ 	.ndo_validate_addr	= eth_validate_addr,
+ };
+@@ -838,8 +851,6 @@ void hostap_setup_dev(struct net_device
+ 
+ 	iface = netdev_priv(dev);
+ 	ether_setup(dev);
+-	dev->min_mtu = PRISM2_MIN_MTU;
+-	dev->max_mtu = PRISM2_MAX_MTU;
+ 	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ 
+ 	/* kernel callbacks */
+--- a/drivers/net/wireless/intersil/orinoco/main.c
++++ b/drivers/net/wireless/intersil/orinoco/main.c
+@@ -322,6 +322,9 @@ int orinoco_change_mtu(struct net_device
+ {
+ 	struct orinoco_private *priv = ndev_priv(dev);
+ 
++	if ((new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU))
++		return -EINVAL;
++
+ 	/* MTU + encapsulation + header length */
+ 	if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) >
+ 	     (priv->nicbuf_size - ETH_HLEN))
+@@ -2285,9 +2288,6 @@ int orinoco_if_add(struct orinoco_privat
+ 	dev->base_addr = base_addr;
+ 	dev->irq = irq;
+ 
+-	dev->min_mtu = ORINOCO_MIN_MTU;
+-	dev->max_mtu = ORINOCO_MAX_MTU;
+-
+ 	SET_NETDEV_DEV(dev, priv->dev);
+ 	ret = register_netdev(dev);
+ 	if (ret)

package/kernel/mac80211/patches/011-backport_strscpy.patch

@@ -0,0 +1,43 @@
+--- a/backport-include/linux/string.h
++++ b/backport-include/linux/string.h
+@@ -25,4 +25,8 @@ extern void *memdup_user_nul(const void
+ void memzero_explicit(void *s, size_t count);
+ #endif
+ 
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(4,3,0))
++ssize_t strscpy(char *dest, const char *src, size_t count);
++#endif
++
+ #endif /* __BACKPORT_LINUX_STRING_H */
+--- a/compat/backport-4.3.c
++++ b/compat/backport-4.3.c
+@@ -57,3 +57,29 @@ void seq_hex_dump(struct seq_file *m, co
+ 	}
+ }
+ EXPORT_SYMBOL_GPL(seq_hex_dump);
++
++ssize_t strscpy(char *dest, const char *src, size_t count)
++{
++	long res = 0;
++
++	if (count == 0)
++		return -E2BIG;
++
++	while (count) {
++		char c;
++
++		c = src[res];
++		dest[res] = c;
++		if (!c)
++			return res;
++		res++;
++		count--;
++	}
++
++	/* Hit buffer length without finding a NUL; force NUL-termination. */
++	if (res)
++		dest[res-1] = '\0';
++
++	return -E2BIG;
++}
++EXPORT_SYMBOL_GPL(strscpy);

package/kernel/mac80211/patches/020-01-rt2x00-avoid-introducing-a-USB-dependency-in-the-rt2.patch

@@ -0,0 +1,85 @@
+From 6232c17438ed01f43665197db5a98a4a4f77ef47 Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Thu, 2 Feb 2017 10:57:40 +0100
+Subject: [PATCH 01/19] rt2x00: avoid introducing a USB dependency in the
+ rt2x00lib module
+
+As reported by Felix:
+
+Though protected by an ifdef, introducing an usb symbol dependency in
+the rt2x00lib module is a major inconvenience for distributions that
+package kernel modules split into individual packages.
+
+Get rid of this unnecessary dependency by calling the usb related
+function from a more suitable place.
+
+Cc: Vishal Thanki <vishalthanki@gmail.com>
+Reported-by: Felix Fietkau <nbd@nbd.name>
+Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 23 ++++++++---------------
+ drivers/net/wireless/ralink/rt2x00/rt2x00usb.c |  5 +++++
+ 2 files changed, 13 insertions(+), 15 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+index 8fcbc8dc94c1..4b08007f93f7 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -1436,21 +1436,6 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
+ 	cancel_work_sync(&rt2x00dev->intf_work);
+ 	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+ 	cancel_work_sync(&rt2x00dev->sleep_work);
+-#if IS_ENABLED(CPTCFG_RT2X00_LIB_USB)
+-	if (rt2x00_is_usb(rt2x00dev)) {
+-		usb_kill_anchored_urbs(rt2x00dev->anchor);
+-		hrtimer_cancel(&rt2x00dev->txstatus_timer);
+-		cancel_work_sync(&rt2x00dev->rxdone_work);
+-		cancel_work_sync(&rt2x00dev->txdone_work);
+-	}
+-#endif
+-	if (rt2x00dev->workqueue)
+-		destroy_workqueue(rt2x00dev->workqueue);
+-
+-	/*
+-	 * Free the tx status fifo.
+-	 */
+-	kfifo_free(&rt2x00dev->txstatus_fifo);
+ 
+ 	/*
+ 	 * Kill the tx status tasklet.
+@@ -1466,6 +1451,14 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
+ 	 */
+ 	rt2x00lib_uninitialize(rt2x00dev);
+ 
++	if (rt2x00dev->workqueue)
++		destroy_workqueue(rt2x00dev->workqueue);
++
++	/*
++	 * Free the tx status fifo.
++	 */
++	kfifo_free(&rt2x00dev->txstatus_fifo);
++
+ 	/*
+ 	 * Free extra components
+ 	 */
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+index 838ca58d2dd6..5a2bf9f63cd7 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+@@ -744,6 +744,11 @@ void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev)
+ {
+ 	struct data_queue *queue;
+ 
++	usb_kill_anchored_urbs(rt2x00dev->anchor);
++	hrtimer_cancel(&rt2x00dev->txstatus_timer);
++	cancel_work_sync(&rt2x00dev->rxdone_work);
++	cancel_work_sync(&rt2x00dev->txdone_work);
++
+ 	queue_for_each(rt2x00dev, queue)
+ 		rt2x00usb_free_entries(queue);
+ }
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-02-rt2x00usb-do-not-anchor-rx-and-tx-urb-s.patch

@@ -0,0 +1,61 @@
+From 93c7018ec16bb83399dd4db61c361a6d6aba0d5a Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 8 Feb 2017 12:18:09 +0100
+Subject: [PATCH 02/19] rt2x00usb: do not anchor rx and tx urb's
+
+We might kill TX or RX urb during rt2x00usb_flush_entry(), what can
+cause anchor list corruption like shown below:
+
+[ 2074.035633] WARNING: CPU: 2 PID: 14480 at lib/list_debug.c:33 __list_add+0xac/0xc0
+[ 2074.035634] list_add corruption. prev->next should be next (ffff88020f362c28), but was dead000000000100. (prev=ffff8801d161bb70).
+<snip>
+[ 2074.035670] Call Trace:
+[ 2074.035672]  [<ffffffff813bde47>] dump_stack+0x63/0x8c
+[ 2074.035674]  [<ffffffff810a2231>] __warn+0xd1/0xf0
+[ 2074.035676]  [<ffffffff810a22af>] warn_slowpath_fmt+0x5f/0x80
+[ 2074.035678]  [<ffffffffa073855d>] ? rt2x00usb_register_write_lock+0x3d/0x60 [rt2800usb]
+[ 2074.035679]  [<ffffffff813dbe4c>] __list_add+0xac/0xc0
+[ 2074.035681]  [<ffffffff81591c6c>] usb_anchor_urb+0x4c/0xa0
+[ 2074.035683]  [<ffffffffa07322af>] rt2x00usb_kick_rx_entry+0xaf/0x100 [rt2x00usb]
+[ 2074.035684]  [<ffffffffa0732322>] rt2x00usb_clear_entry+0x22/0x30 [rt2x00usb]
+
+To fix do not anchor TX and RX urb's, it is not needed as during
+shutdown we kill those urbs in rt2x00usb_free_entries().
+
+Cc: Vishal Thanki <vishalthanki@gmail.com>
+Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 4 ----
+ 1 file changed, 4 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+index 5a2bf9f63cd7..fe13dd07cc2a 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+@@ -319,10 +319,8 @@ static bool rt2x00usb_kick_tx_entry(struct queue_entry *entry, void *data)
+ 			  entry->skb->data, length,
+ 			  rt2x00usb_interrupt_txdone, entry);
+ 
+-	usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
+ 	status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
+ 	if (status) {
+-		usb_unanchor_urb(entry_priv->urb);
+ 		if (status == -ENODEV)
+ 			clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+ 		set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
+@@ -410,10 +408,8 @@ static bool rt2x00usb_kick_rx_entry(struct queue_entry *entry, void *data)
+ 			  entry->skb->data, entry->skb->len,
+ 			  rt2x00usb_interrupt_rxdone, entry);
+ 
+-	usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
+ 	status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
+ 	if (status) {
+-		usb_unanchor_urb(entry_priv->urb);
+ 		if (status == -ENODEV)
+ 			clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+ 		set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-03-rt2x00usb-fix-anchor-initialization.patch

@@ -0,0 +1,75 @@
+From 0488a6121dfe6cbd44de15ea3627913b7549a1e9 Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 8 Feb 2017 12:18:10 +0100
+Subject: [PATCH 03/19] rt2x00usb: fix anchor initialization
+
+If device fail to initialize we can OOPS in rt2x00lib_remove_dev(), due
+to using uninitialized usb_anchor structure:
+
+[  855.435820] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
+[  855.435826] ieee80211 phy3: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
+[  855.435829] ieee80211 phy3: rt2x00lib_probe_dev: Error - Failed to allocate device
+[  855.435845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
+[  855.435900] IP: _raw_spin_lock_irq+0xd/0x30
+[  855.435926] PGD 0
+[  855.435953] Oops: 0002 [#1] SMP
+<snip>
+[  855.437011] Call Trace:
+[  855.437029]  ? usb_kill_anchored_urbs+0x27/0xc0
+[  855.437061]  rt2x00lib_remove_dev+0x190/0x1c0 [rt2x00lib]
+[  855.437097]  rt2x00lib_probe_dev+0x246/0x7a0 [rt2x00lib]
+[  855.437149]  ? ieee80211_roc_setup+0x9e/0xd0 [mac80211]
+[  855.437183]  ? __kmalloc+0x1af/0x1f0
+[  855.437207]  ? rt2x00usb_probe+0x13d/0xc50 [rt2x00usb]
+[  855.437240]  rt2x00usb_probe+0x155/0xc50 [rt2x00usb]
+[  855.437273]  rt2800usb_probe+0x15/0x20 [rt2800usb]
+[  855.437304]  usb_probe_interface+0x159/0x2d0
+[  855.437333]  driver_probe_device+0x2bb/0x460
+
+Patch changes initialization sequence to fix the problem.
+
+Cc: Vishal Thanki <vishalthanki@gmail.com>
+Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 13 ++++++++-----
+ 1 file changed, 8 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+index fe13dd07cc2a..c696f0ad6a68 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+@@ -825,10 +825,6 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
+ 	if (retval)
+ 		goto exit_free_device;
+ 
+-	retval = rt2x00lib_probe_dev(rt2x00dev);
+-	if (retval)
+-		goto exit_free_reg;
+-
+ 	rt2x00dev->anchor = devm_kmalloc(&usb_dev->dev,
+ 					sizeof(struct usb_anchor),
+ 					GFP_KERNEL);
+@@ -836,10 +832,17 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
+ 		retval = -ENOMEM;
+ 		goto exit_free_reg;
+ 	}
+-
+ 	init_usb_anchor(rt2x00dev->anchor);
++
++	retval = rt2x00lib_probe_dev(rt2x00dev);
++	if (retval)
++		goto exit_free_anchor;
++
+ 	return 0;
+ 
++exit_free_anchor:
++	usb_kill_anchored_urbs(rt2x00dev->anchor);
++
+ exit_free_reg:
+ 	rt2x00usb_free_reg(rt2x00dev);
+ 
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-04-rt61pci-use-entry-directly.patch

@@ -0,0 +1,28 @@
+From 80a97eae304631f57ff8560f87c0b18b95321443 Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 8 Feb 2017 13:51:29 +0100
+Subject: [PATCH 04/19] rt61pci: use entry directly
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt61pci.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt61pci.c b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
+index 5306a3b2622d..8adb5f3abe15 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
+@@ -1903,8 +1903,7 @@ static void rt61pci_write_tx_desc(struct queue_entry *entry,
+ 
+ 	rt2x00_desc_read(txd, 5, &word);
+ 	rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid);
+-	rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
+-			   skbdesc->entry->entry_idx);
++	rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx);
+ 	rt2x00_set_field32(&word, TXD_W5_TX_POWER,
+ 			   TXPOWER_TO_DEV(entry->queue->rt2x00dev->tx_power));
+ 	rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-05-rt2x00-call-entry-directly-in-rt2x00_dump_frame.patch

@@ -0,0 +1,181 @@
+From 2ceb813798e1fd33e71a574771828c0f298e077b Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 8 Feb 2017 13:51:30 +0100
+Subject: [PATCH 05/19] rt2x00: call entry directly in rt2x00_dump_frame
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2400pci.c   | 2 +-
+ drivers/net/wireless/ralink/rt2x00/rt2500pci.c   | 2 +-
+ drivers/net/wireless/ralink/rt2x00/rt2500usb.c   | 2 +-
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c   | 2 +-
+ drivers/net/wireless/ralink/rt2x00/rt2x00.h      | 4 ++--
+ drivers/net/wireless/ralink/rt2x00/rt2x00debug.c | 7 ++++---
+ drivers/net/wireless/ralink/rt2x00/rt2x00dev.c   | 4 ++--
+ drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 2 +-
+ drivers/net/wireless/ralink/rt2x00/rt61pci.c     | 2 +-
+ drivers/net/wireless/ralink/rt2x00/rt73usb.c     | 2 +-
+ 10 files changed, 15 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
+index 085c5b423bdf..19874439ac40 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
+@@ -1200,7 +1200,7 @@ static void rt2400pci_write_beacon(struct queue_entry *entry,
+ 	/*
+ 	 * Dump beacon to userspace through debugfs.
+ 	 */
+-	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
++	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
+ out:
+ 	/*
+ 	 * Enable beaconing again.
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
+index 9832fd50c793..791434de8052 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
+@@ -1349,7 +1349,7 @@ static void rt2500pci_write_beacon(struct queue_entry *entry,
+ 	/*
+ 	 * Dump beacon to userspace through debugfs.
+ 	 */
+-	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
++	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
+ out:
+ 	/*
+ 	 * Enable beaconing again.
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
+index cd3ab5a9e98d..62357465fe29 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
+@@ -1170,7 +1170,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry,
+ 	/*
+ 	 * Dump beacon to userspace through debugfs.
+ 	 */
+-	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
++	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
+ 
+ 	/*
+ 	 * USB devices cannot blindly pass the skb->len as the
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+index 572cdea4ca25..8223a1520316 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -1014,7 +1014,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
+ 	/*
+ 	 * Dump beacon to userspace through debugfs.
+ 	 */
+-	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
++	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
+ 
+ 	/*
+ 	 * Write entire beacon with TXWI and padding to register.
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+index ea299c4e7ada..26869b3bef45 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -1400,11 +1400,11 @@ void rt2x00queue_flush_queues(struct rt2x00_dev *rt2x00dev, bool drop);
+  */
+ #ifdef CPTCFG_RT2X00_LIB_DEBUGFS
+ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
+-			    enum rt2x00_dump_type type, struct sk_buff *skb);
++			    enum rt2x00_dump_type type, struct queue_entry *entry);
+ #else
+ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
+ 					  enum rt2x00_dump_type type,
+-					  struct sk_buff *skb)
++					  struct queue_entry *entry)
+ {
+ }
+ #endif /* CPTCFG_RT2X00_LIB_DEBUGFS */
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
+index 72ae530e4a3b..964aefdc11f0 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
+@@ -157,9 +157,10 @@ void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+ }
+ 
+ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
+-			    enum rt2x00_dump_type type, struct sk_buff *skb)
++			    enum rt2x00_dump_type type, struct queue_entry *entry)
+ {
+ 	struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
++	struct sk_buff *skb = entry->skb;
+ 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ 	struct sk_buff *skbcopy;
+ 	struct rt2x00dump_hdr *dump_hdr;
+@@ -196,8 +197,8 @@ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
+ 	dump_hdr->chip_rf = cpu_to_le16(rt2x00dev->chip.rf);
+ 	dump_hdr->chip_rev = cpu_to_le16(rt2x00dev->chip.rev);
+ 	dump_hdr->type = cpu_to_le16(type);
+-	dump_hdr->queue_index = skbdesc->entry->queue->qid;
+-	dump_hdr->entry_index = skbdesc->entry->entry_idx;
++	dump_hdr->queue_index = entry->queue->qid;
++	dump_hdr->entry_index = entry->entry_idx;
+ 	dump_hdr->timestamp_sec = cpu_to_le32(timestamp.tv_sec);
+ 	dump_hdr->timestamp_usec = cpu_to_le32(timestamp.tv_usec);
+ 
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+index 4b08007f93f7..dd6678109b7e 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -363,7 +363,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
+ 	 * Send frame to debugfs immediately, after this call is completed
+ 	 * we are going to overwrite the skb->cb array.
+ 	 */
+-	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
++	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
+ 
+ 	/*
+ 	 * Determine if the frame has been successfully transmitted and
+@@ -772,7 +772,7 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp)
+ 	 */
+ 	rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
+ 	rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
+-	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
++	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry);
+ 
+ 	/*
+ 	 * Initialize RX status information, and send frame
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
+index b2364d378774..380daf4e1b8d 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
+@@ -544,7 +544,7 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
+ 	 * All processing on the frame has been completed, this means
+ 	 * it is now ready to be dumped to userspace through debugfs.
+ 	 */
+-	rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry->skb);
++	rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry);
+ }
+ 
+ static void rt2x00queue_kick_tx_queue(struct data_queue *queue,
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt61pci.c b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
+index 8adb5f3abe15..973d418b8113 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
+@@ -1988,7 +1988,7 @@ static void rt61pci_write_beacon(struct queue_entry *entry,
+ 	/*
+ 	 * Dump beacon to userspace through debugfs.
+ 	 */
+-	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
++	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
+ 
+ 	/*
+ 	 * Write entire beacon with descriptor and padding to register.
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt73usb.c b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
+index 1a29c4d205a5..bb8d307a789f 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
+@@ -1557,7 +1557,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry,
+ 	/*
+ 	 * Dump beacon to userspace through debugfs.
+ 	 */
+-	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
++	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
+ 
+ 	/*
+ 	 * Write entire beacon with descriptor and padding to register.
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-06-rt2x00-remove-queue_entry-from-skbdesc.patch

@@ -0,0 +1,59 @@
+From cf81db30a6edcca791b1bfa5348a162471121d11 Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 8 Feb 2017 13:51:31 +0100
+Subject: [PATCH 06/19] rt2x00: remove queue_entry from skbdesc
+
+queue_entry field of skbdesc is not read any more, remove it to allow
+skbdesc contain other data.
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 3 ---
+ drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 2 --
+ 2 files changed, 5 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
+index 380daf4e1b8d..e1660b92b20c 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
+@@ -83,7 +83,6 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp)
+ 	 */
+ 	skbdesc = get_skb_frame_desc(skb);
+ 	memset(skbdesc, 0, sizeof(*skbdesc));
+-	skbdesc->entry = entry;
+ 
+ 	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA)) {
+ 		dma_addr_t skb_dma;
+@@ -689,7 +688,6 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
+ 		goto out;
+ 	}
+ 
+-	skbdesc->entry = entry;
+ 	entry->skb = skb;
+ 
+ 	/*
+@@ -774,7 +772,6 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
+ 	 */
+ 	skbdesc = get_skb_frame_desc(intf->beacon->skb);
+ 	memset(skbdesc, 0, sizeof(*skbdesc));
+-	skbdesc->entry = intf->beacon;
+ 
+ 	/*
+ 	 * Send beacon to hardware.
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
+index 2233b911a1d7..22d18818e850 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
+@@ -116,8 +116,6 @@ struct skb_frame_desc {
+ 	__le32 iv[2];
+ 
+ 	dma_addr_t skb_dma;
+-
+-	struct queue_entry *entry;
+ };
+ 
+ /**
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-07-rt2500usb-don-t-mark-register-accesses-as-inline.patch

@@ -0,0 +1,84 @@
+From 7272416609126e8910b7f0d0e3dba008aa87830c Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Tue, 14 Feb 2017 22:28:33 +0100
+Subject: [PATCH 07/19] rt2500usb: don't mark register accesses as inline
+
+When CONFIG_KASAN is set, we get a rather large stack here:
+
+drivers/net/wireless/ralink/rt2x00/rt2500usb.c: In function 'rt2500usb_set_device_state':
+drivers/net/wireless/ralink/rt2x00/rt2500usb.c:1074:1: error: the frame size of 3032 bytes is larger than 100 bytes [-Werror=frame-larger-than=]
+
+If we don't force those functions to be inline, the compiler can figure this
+out better itself and not inline the functions when doing so would be harmful,
+reducing the stack size to a merge 256 bytes.
+
+Note that there is another problem that manifests in this driver, as a result
+of the typecheck() macro causing even larger stack frames.
+
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2500usb.c | 19 +++++--------------
+ 1 file changed, 5 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
+index 62357465fe29..0d2670a56c4c 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
+@@ -55,7 +55,7 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+  * If the csr_mutex is already held then the _lock variants must
+  * be used instead.
+  */
+-static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
++static void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
+ 					   const unsigned int offset,
+ 					   u16 *value)
+ {
+@@ -66,7 +66,7 @@ static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
+ 	*value = le16_to_cpu(reg);
+ }
+ 
+-static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
++static void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
+ 						const unsigned int offset,
+ 						u16 *value)
+ {
+@@ -77,16 +77,7 @@ static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
+ 	*value = le16_to_cpu(reg);
+ }
+ 
+-static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev,
+-						const unsigned int offset,
+-						void *value, const u16 length)
+-{
+-	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
+-				      USB_VENDOR_REQUEST_IN, offset,
+-				      value, length);
+-}
+-
+-static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
++static void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
+ 					    const unsigned int offset,
+ 					    u16 value)
+ {
+@@ -96,7 +87,7 @@ static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
+ 				      &reg, sizeof(reg));
+ }
+ 
+-static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
++static void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
+ 						 const unsigned int offset,
+ 						 u16 value)
+ {
+@@ -106,7 +97,7 @@ static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
+ 				       &reg, sizeof(reg), REGISTER_TIMEOUT);
+ }
+ 
+-static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
++static void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
+ 						 const unsigned int offset,
+ 						 void *value, const u16 length)
+ {
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-08-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch

@@ -0,0 +1,94 @@
+From 96609f366c6f792421e1939c5c834abbe24eb88a Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 15 Feb 2017 10:25:04 +0100
+Subject: [PATCH 08/19] rt2x00: rt2800lib: move rt2800_drv_data declaration
+ into rt2800lib.h
+
+The rt2800_drv_data structure contains driver specific
+information. Move the declaration into the rt2800lib.h
+header which is a more logical place for it. Also fix
+the comment style to avoid checkpatch warning.
+
+The patch contains no functional changes, it is in
+preparation for the next patch.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800.h    | 25 -------------------------
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 23 +++++++++++++++++++++++
+ 2 files changed, 23 insertions(+), 25 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800.h b/drivers/net/wireless/ralink/rt2x00/rt2800.h
+index 256496bfbafb..0e7051d8132f 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
+@@ -2987,29 +2987,4 @@ enum rt2800_eeprom_word {
+  */
+ #define BCN_TBTT_OFFSET 64
+ 
+-/*
+- * Hardware has 255 WCID table entries. First 32 entries are reserved for
+- * shared keys. Since parts of the pairwise key table might be shared with
+- * the beacon frame buffers 6 & 7 we could only use the first 222 entries.
+- */
+-#define WCID_START	33
+-#define WCID_END	222
+-#define STA_IDS_SIZE	(WCID_END - WCID_START + 2)
+-
+-/*
+- * RT2800 driver data structure
+- */
+-struct rt2800_drv_data {
+-	u8 calibration_bw20;
+-	u8 calibration_bw40;
+-	u8 bbp25;
+-	u8 bbp26;
+-	u8 txmixer_gain_24g;
+-	u8 txmixer_gain_5g;
+-	u8 max_psdu;
+-	unsigned int tbtt_tick;
+-	unsigned int ampdu_factor_cnt[4];
+-	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
+-};
+-
+ #endif /* RT2800_H */
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+index 0a8b4df665fe..8e1ae138c3f1 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+@@ -20,6 +20,29 @@
+ #ifndef RT2800LIB_H
+ #define RT2800LIB_H
+ 
++/*
++ * Hardware has 255 WCID table entries. First 32 entries are reserved for
++ * shared keys. Since parts of the pairwise key table might be shared with
++ * the beacon frame buffers 6 & 7 we could only use the first 222 entries.
++ */
++#define WCID_START	33
++#define WCID_END	222
++#define STA_IDS_SIZE	(WCID_END - WCID_START + 2)
++
++/* RT2800 driver data structure */
++struct rt2800_drv_data {
++	u8 calibration_bw20;
++	u8 calibration_bw40;
++	u8 bbp25;
++	u8 bbp26;
++	u8 txmixer_gain_24g;
++	u8 txmixer_gain_5g;
++	u8 max_psdu;
++	unsigned int tbtt_tick;
++	unsigned int ampdu_factor_cnt[4];
++	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
++};
++
+ struct rt2800_ops {
+ 	void (*register_read)(struct rt2x00_dev *rt2x00dev,
+ 			      const unsigned int offset, u32 *value);
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-09-rt2800-identify-station-based-on-status-WCID.patch

@@ -0,0 +1,94 @@
+From a13d985f26f6df07d5c5c0e190477628e236babc Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 15 Feb 2017 10:25:05 +0100
+Subject: [PATCH 09/19] rt2800: identify station based on status WCID
+
+Add framework to identify sta based on tx status WCID. This is currently
+not used, will start be utilized in the future patch.
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c   | 5 +++++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h   | 1 +
+ drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 3 ++-
+ 3 files changed, 8 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+index 8223a1520316..46405cce35e0 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -855,11 +855,13 @@ EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
+ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
+ {
+ 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
++	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+ 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ 	struct txdone_entry_desc txdesc;
+ 	u32 word;
+ 	u16 mcs, real_mcs;
+ 	int aggr, ampdu;
++	int wcid;
+ 
+ 	/*
+ 	 * Obtain the status about this packet.
+@@ -872,6 +874,7 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
+ 
+ 	real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
+ 	aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
++	wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
+ 
+ 	/*
+ 	 * If a frame was meant to be sent as a single non-aggregated MPDU
+@@ -1468,6 +1471,7 @@ int rt2800_sta_add(struct rt2x00_dev *rt2x00dev, struct ieee80211_vif *vif,
+ 		return 0;
+ 
+ 	__set_bit(wcid - WCID_START, drv_data->sta_ids);
++	drv_data->wcid_to_sta[wcid - WCID_START] = sta;
+ 
+ 	/*
+ 	 * Clean up WCID attributes and write STA address to the device.
+@@ -1498,6 +1502,7 @@ int rt2800_sta_remove(struct rt2x00_dev *rt2x00dev, struct ieee80211_sta *sta)
+ 	 * get renewed when the WCID is reused.
+ 	 */
+ 	rt2800_config_wcid(rt2x00dev, NULL, wcid);
++	drv_data->wcid_to_sta[wcid - WCID_START] = NULL;
+ 	__clear_bit(wcid - WCID_START, drv_data->sta_ids);
+ 
+ 	return 0;
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+index 8e1ae138c3f1..6811d677a6e7 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+@@ -41,6 +41,7 @@ struct rt2800_drv_data {
+ 	unsigned int tbtt_tick;
+ 	unsigned int ampdu_factor_cnt[4];
+ 	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
++	struct ieee80211_sta *wcid_to_sta[STA_IDS_SIZE];
+ };
+ 
+ struct rt2800_ops {
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
+index 22d18818e850..9b297fce4692 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
+@@ -102,7 +102,7 @@ enum skb_frame_desc_flags {
+  *	of the scope of the skb->data pointer.
+  * @iv: IV/EIV data used during encryption/decryption.
+  * @skb_dma: (PCI-only) the DMA address associated with the sk buffer.
+- * @entry: The entry to which this sk buffer belongs.
++ * @sta: The station where sk buffer was sent.
+  */
+ struct skb_frame_desc {
+ 	u8 flags;
+@@ -116,6 +116,7 @@ struct skb_frame_desc {
+ 	__le32 iv[2];
+ 
+ 	dma_addr_t skb_dma;
++	struct ieee80211_sta *sta;
+ };
+ 
+ /**
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-10-rt2x00-separte-filling-tx-status-from-rt2x00lib_txdo.patch

@@ -0,0 +1,178 @@
+From 5edb05afebba8f488a30db29550e55c42eea6d6a Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 15 Feb 2017 10:25:06 +0100
+Subject: [PATCH 10/19] rt2x00: separte filling tx status from rt2x00lib_txdone
+
+This makes rt2x00lib_txdone a bit simpler and will allow to reuse code
+in different variant of txdone which I'm preparing.
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 141 +++++++++++++------------
+ 1 file changed, 76 insertions(+), 65 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+index dd6678109b7e..b5d90fefc96b 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -313,73 +313,14 @@ static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry)
+ 	return ret;
+ }
+ 
+-void rt2x00lib_txdone(struct queue_entry *entry,
+-		      struct txdone_entry_desc *txdesc)
++static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
++				     struct ieee80211_tx_info *tx_info,
++				     struct skb_frame_desc *skbdesc,
++				     struct txdone_entry_desc *txdesc,
++				     bool success)
+ {
+-	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+-	unsigned int header_length, i;
+ 	u8 rate_idx, rate_flags, retry_rates;
+-	u8 skbdesc_flags = skbdesc->flags;
+-	bool success;
+-
+-	/*
+-	 * Unmap the skb.
+-	 */
+-	rt2x00queue_unmap_skb(entry);
+-
+-	/*
+-	 * Remove the extra tx headroom from the skb.
+-	 */
+-	skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
+-
+-	/*
+-	 * Signal that the TX descriptor is no longer in the skb.
+-	 */
+-	skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
+-
+-	/*
+-	 * Determine the length of 802.11 header.
+-	 */
+-	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+-
+-	/*
+-	 * Remove L2 padding which was added during
+-	 */
+-	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
+-		rt2x00queue_remove_l2pad(entry->skb, header_length);
+-
+-	/*
+-	 * If the IV/EIV data was stripped from the frame before it was
+-	 * passed to the hardware, we should now reinsert it again because
+-	 * mac80211 will expect the same data to be present it the
+-	 * frame as it was passed to us.
+-	 */
+-	if (rt2x00_has_cap_hw_crypto(rt2x00dev))
+-		rt2x00crypto_tx_insert_iv(entry->skb, header_length);
+-
+-	/*
+-	 * Send frame to debugfs immediately, after this call is completed
+-	 * we are going to overwrite the skb->cb array.
+-	 */
+-	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
+-
+-	/*
+-	 * Determine if the frame has been successfully transmitted and
+-	 * remove BARs from our check list while checking for their
+-	 * TX status.
+-	 */
+-	success =
+-	    rt2x00lib_txdone_bar_status(entry) ||
+-	    test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
+-	    test_bit(TXDONE_UNKNOWN, &txdesc->flags);
+-
+-	/*
+-	 * Update TX statistics.
+-	 */
+-	rt2x00dev->link.qual.tx_success += success;
+-	rt2x00dev->link.qual.tx_failed += !success;
++	int i;
+ 
+ 	rate_idx = skbdesc->tx_rate_idx;
+ 	rate_flags = skbdesc->tx_rate_flags;
+@@ -448,6 +389,76 @@ void rt2x00lib_txdone(struct queue_entry *entry,
+ 		else
+ 			rt2x00dev->low_level_stats.dot11RTSFailureCount++;
+ 	}
++}
++
++void rt2x00lib_txdone(struct queue_entry *entry,
++		      struct txdone_entry_desc *txdesc)
++{
++	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
++	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
++	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
++	u8 skbdesc_flags = skbdesc->flags;
++	unsigned int header_length;
++	bool success;
++
++	/*
++	 * Unmap the skb.
++	 */
++	rt2x00queue_unmap_skb(entry);
++
++	/*
++	 * Remove the extra tx headroom from the skb.
++	 */
++	skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
++
++	/*
++	 * Signal that the TX descriptor is no longer in the skb.
++	 */
++	skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
++
++	/*
++	 * Determine the length of 802.11 header.
++	 */
++	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
++
++	/*
++	 * Remove L2 padding which was added during
++	 */
++	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
++		rt2x00queue_remove_l2pad(entry->skb, header_length);
++
++	/*
++	 * If the IV/EIV data was stripped from the frame before it was
++	 * passed to the hardware, we should now reinsert it again because
++	 * mac80211 will expect the same data to be present it the
++	 * frame as it was passed to us.
++	 */
++	if (rt2x00_has_cap_hw_crypto(rt2x00dev))
++		rt2x00crypto_tx_insert_iv(entry->skb, header_length);
++
++	/*
++	 * Send frame to debugfs immediately, after this call is completed
++	 * we are going to overwrite the skb->cb array.
++	 */
++	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
++
++	/*
++	 * Determine if the frame has been successfully transmitted and
++	 * remove BARs from our check list while checking for their
++	 * TX status.
++	 */
++	success =
++	    rt2x00lib_txdone_bar_status(entry) ||
++	    test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
++	    test_bit(TXDONE_UNKNOWN, &txdesc->flags);
++
++	/*
++	 * Update TX statistics.
++	 */
++	rt2x00dev->link.qual.tx_success += success;
++	rt2x00dev->link.qual.tx_failed += !success;
++
++	rt2x00lib_fill_tx_status(rt2x00dev, tx_info, skbdesc, txdesc, success);
+ 
+ 	/*
+ 	 * Only send the status report to mac80211 when it's a frame
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-11-rt2x00-separte-clearing-entry-from-rt2x00lib_txdone.patch

@@ -0,0 +1,88 @@
+From 56646adf9cd60b488ddc5633a2d9aa1f30efa5db Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 15 Feb 2017 10:25:07 +0100
+Subject: [PATCH 11/19] rt2x00: separte clearing entry from rt2x00lib_txdone
+
+This makes rt2x00lib_txdone a bit simpler and will allow to reuse
+code in different variant of txdone which I'm preparing.
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 51 +++++++++++++++-----------
+ 1 file changed, 29 insertions(+), 22 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+index b5d90fefc96b..03b368ac9cb6 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -391,6 +391,32 @@ static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
+ 	}
+ }
+ 
++static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev,
++				  struct queue_entry *entry)
++{
++	/*
++	 * Make this entry available for reuse.
++	 */
++	entry->skb = NULL;
++	entry->flags = 0;
++
++	rt2x00dev->ops->lib->clear_entry(entry);
++
++	rt2x00queue_index_inc(entry, Q_INDEX_DONE);
++
++	/*
++	 * If the data queue was below the threshold before the txdone
++	 * handler we must make sure the packet queue in the mac80211 stack
++	 * is reenabled when the txdone handler has finished. This has to be
++	 * serialized with rt2x00mac_tx(), otherwise we can wake up queue
++	 * before it was stopped.
++	 */
++	spin_lock_bh(&entry->queue->tx_lock);
++	if (!rt2x00queue_threshold(entry->queue))
++		rt2x00queue_unpause_queue(entry->queue);
++	spin_unlock_bh(&entry->queue->tx_lock);
++}
++
+ void rt2x00lib_txdone(struct queue_entry *entry,
+ 		      struct txdone_entry_desc *txdesc)
+ {
+@@ -471,30 +497,11 @@ void rt2x00lib_txdone(struct queue_entry *entry,
+ 			ieee80211_tx_status(rt2x00dev->hw, entry->skb);
+ 		else
+ 			ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
+-	} else
++	} else {
+ 		dev_kfree_skb_any(entry->skb);
++	}
+ 
+-	/*
+-	 * Make this entry available for reuse.
+-	 */
+-	entry->skb = NULL;
+-	entry->flags = 0;
+-
+-	rt2x00dev->ops->lib->clear_entry(entry);
+-
+-	rt2x00queue_index_inc(entry, Q_INDEX_DONE);
+-
+-	/*
+-	 * If the data queue was below the threshold before the txdone
+-	 * handler we must make sure the packet queue in the mac80211 stack
+-	 * is reenabled when the txdone handler has finished. This has to be
+-	 * serialized with rt2x00mac_tx(), otherwise we can wake up queue
+-	 * before it was stopped.
+-	 */
+-	spin_lock_bh(&entry->queue->tx_lock);
+-	if (!rt2x00queue_threshold(entry->queue))
+-		rt2x00queue_unpause_queue(entry->queue);
+-	spin_unlock_bh(&entry->queue->tx_lock);
++	rt2x00lib_clear_entry(rt2x00dev, entry);
+ }
+ EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
+ 
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-12-rt2x00-add-txdone-nomatch-function.patch

@@ -0,0 +1,92 @@
+From a09305d052166cb489402a63a5d275e954e0b923 Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 15 Feb 2017 10:25:08 +0100
+Subject: [PATCH 12/19] rt2x00: add txdone nomatch function
+
+This txdone nomatch function will be used when we get status from the HW,
+but we could not match it with any sent skb.
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00.h    |  2 ++
+ drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 50 ++++++++++++++++++++++++++
+ 2 files changed, 52 insertions(+)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+index 340787894c69..91ba10fdf732 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -1425,6 +1425,8 @@ void rt2x00lib_dmastart(struct queue_entry *entry);
+ void rt2x00lib_dmadone(struct queue_entry *entry);
+ void rt2x00lib_txdone(struct queue_entry *entry,
+ 		      struct txdone_entry_desc *txdesc);
++void rt2x00lib_txdone_nomatch(struct queue_entry *entry,
++			      struct txdone_entry_desc *txdesc);
+ void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status);
+ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp);
+ 
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+index 03b368ac9cb6..90fc259fb5bc 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -417,6 +417,56 @@ static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev,
+ 	spin_unlock_bh(&entry->queue->tx_lock);
+ }
+ 
++void rt2x00lib_txdone_nomatch(struct queue_entry *entry,
++			      struct txdone_entry_desc *txdesc)
++{
++	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
++	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
++	struct ieee80211_tx_info txinfo = {};
++	bool success;
++
++	/*
++	 * Unmap the skb.
++	 */
++	rt2x00queue_unmap_skb(entry);
++
++	/*
++	 * Signal that the TX descriptor is no longer in the skb.
++	 */
++	skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
++
++	/*
++	 * Send frame to debugfs immediately, after this call is completed
++	 * we are going to overwrite the skb->cb array.
++	 */
++	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
++
++	/*
++	 * Determine if the frame has been successfully transmitted and
++	 * remove BARs from our check list while checking for their
++	 * TX status.
++	 */
++	success =
++	    rt2x00lib_txdone_bar_status(entry) ||
++	    test_bit(TXDONE_SUCCESS, &txdesc->flags);
++
++	if (!test_bit(TXDONE_UNKNOWN, &txdesc->flags)) {
++		/*
++		 * Update TX statistics.
++		 */
++		rt2x00dev->link.qual.tx_success += success;
++		rt2x00dev->link.qual.tx_failed += !success;
++
++		rt2x00lib_fill_tx_status(rt2x00dev, &txinfo, skbdesc, txdesc,
++					 success);
++		ieee80211_tx_status_noskb(rt2x00dev->hw, skbdesc->sta, &txinfo);
++	}
++
++	dev_kfree_skb_any(entry->skb);
++	rt2x00lib_clear_entry(rt2x00dev, entry);
++}
++EXPORT_SYMBOL_GPL(rt2x00lib_txdone_nomatch);
++
+ void rt2x00lib_txdone(struct queue_entry *entry,
+ 		      struct txdone_entry_desc *txdesc)
+ {
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-13-rt2x00-fixup-fill_tx_status-for-nomatch-case.patch

@@ -0,0 +1,54 @@
+From ec80ad70d778af7665992672896633ebd3b02ac8 Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 15 Feb 2017 10:25:09 +0100
+Subject: [PATCH 13/19] rt2x00: fixup fill_tx_status for nomatch case
+
+Add bits rt2x00lib_fill_tx_status() when filling status in nomatch
+case and hopefully do not break the function for existing cases.
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00dev.c   | 6 +++++-
+ drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 1 +
+ 2 files changed, 6 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+index 90fc259fb5bc..e95d2aad3b3f 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+@@ -357,6 +357,9 @@ static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
+ 	if (i < (IEEE80211_TX_MAX_RATES - 1))
+ 		tx_info->status.rates[i].idx = -1; /* terminate */
+ 
++	if (test_bit(TXDONE_NO_ACK_REQ, &txdesc->flags))
++		tx_info->flags |= IEEE80211_TX_CTL_NO_ACK;
++
+ 	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ 		if (success)
+ 			tx_info->flags |= IEEE80211_TX_STAT_ACK;
+@@ -375,7 +378,8 @@ static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
+ 	 */
+ 	if (test_bit(TXDONE_AMPDU, &txdesc->flags) ||
+ 	    tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+-		tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
++		tx_info->flags |= IEEE80211_TX_STAT_AMPDU |
++				  IEEE80211_TX_CTL_AMPDU;
+ 		tx_info->status.ampdu_len = 1;
+ 		tx_info->status.ampdu_ack_len = success ? 1 : 0;
+ 
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
+index 9b297fce4692..c78fb8c8838a 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
+@@ -215,6 +215,7 @@ enum txdone_entry_desc_flags {
+ 	TXDONE_FAILURE,
+ 	TXDONE_EXCESSIVE_RETRY,
+ 	TXDONE_AMPDU,
++	TXDONE_NO_ACK_REQ,
+ };
+ 
+ /**
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-14-rt2x00-use-txdone_nomatch-on-rt2800usb.patch

@@ -0,0 +1,191 @@
+From 293dff78ee058ec1e0b90e05a803c512b6a2097f Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 15 Feb 2017 10:25:10 +0100
+Subject: [PATCH 14/19] rt2x00: use txdone_nomatch on rt2800usb
+
+If we do not match skb entry, provide tx status via nomatch procedure.
+
+Currently in that case we do rt2x00lib_txdone_noinfo(TXDONE_NOINFO),
+which actually assume that entry->skb was posted without retries and
+provide rate saved in skb desc as successful. Patch changed that to
+rate read from TX_STAT_FIFO, however still do not provide correct
+number of retries.
+
+On SoC/PCI devices we keep providing status via standard txdone
+procedure, no change in those devices, though we should thing about it.
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c  | 31 ++++++++++++++++++++-----
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.h  |  3 ++-
+ drivers/net/wireless/ralink/rt2x00/rt2800mmio.c |  2 +-
+ drivers/net/wireless/ralink/rt2x00/rt2800usb.c  | 18 ++++++--------
+ 4 files changed, 35 insertions(+), 19 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+index 46405cce35e0..4a7bec708a13 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -852,7 +852,8 @@ void rt2800_process_rxwi(struct queue_entry *entry,
+ }
+ EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
+ 
+-void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
++void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
++			 bool match)
+ {
+ 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ 	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+@@ -860,8 +861,7 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
+ 	struct txdone_entry_desc txdesc;
+ 	u32 word;
+ 	u16 mcs, real_mcs;
+-	int aggr, ampdu;
+-	int wcid;
++	int aggr, ampdu, wcid, ack_req;
+ 
+ 	/*
+ 	 * Obtain the status about this packet.
+@@ -875,6 +875,7 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
+ 	real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
+ 	aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
+ 	wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
++	ack_req	= rt2x00_get_field32(status, TX_STA_FIFO_TX_ACK_REQUIRED);
+ 
+ 	/*
+ 	 * If a frame was meant to be sent as a single non-aggregated MPDU
+@@ -891,8 +892,12 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
+ 	 * Hence, replace the requested rate with the real tx rate to not
+ 	 * confuse the rate control algortihm by providing clearly wrong
+ 	 * data.
+-	 */
+-	if (unlikely(aggr == 1 && ampdu == 0 && real_mcs != mcs)) {
++	 *
++	 * FIXME: if we do not find matching entry, we tell that frame was
++	 * posted without any retries. We need to find a way to fix that
++	 * and provide retry count.
++ 	 */
++	if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) {
+ 		skbdesc->tx_rate_idx = real_mcs;
+ 		mcs = real_mcs;
+ 	}
+@@ -900,6 +905,9 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
+ 	if (aggr == 1 || ampdu == 1)
+ 		__set_bit(TXDONE_AMPDU, &txdesc.flags);
+ 
++	if (!ack_req)
++		__set_bit(TXDONE_NO_ACK_REQ, &txdesc.flags);
++
+ 	/*
+ 	 * Ralink has a retry mechanism using a global fallback
+ 	 * table. We setup this fallback table to try the immediate
+@@ -931,7 +939,18 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
+ 	if (txdesc.retry)
+ 		__set_bit(TXDONE_FALLBACK, &txdesc.flags);
+ 
+-	rt2x00lib_txdone(entry, &txdesc);
++	if (!match) {
++		/* RCU assures non-null sta will not be freed by mac80211. */
++		rcu_read_lock();
++		if (likely(wcid >= WCID_START && wcid <= WCID_END))
++			skbdesc->sta = drv_data->wcid_to_sta[wcid - WCID_START];
++		else
++			skbdesc->sta = NULL;
++		rt2x00lib_txdone_nomatch(entry, &txdesc);
++		rcu_read_unlock();
++	} else {
++		rt2x00lib_txdone(entry, &txdesc);
++	}
+ }
+ EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
+ 
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+index 6811d677a6e7..d9ef260d542a 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+@@ -191,7 +191,8 @@ void rt2800_write_tx_data(struct queue_entry *entry,
+ 			  struct txentry_desc *txdesc);
+ void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc);
+ 
+-void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32* txwi);
++void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
++			 bool match);
+ 
+ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
+ void rt2800_clear_beacon(struct queue_entry *entry);
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
+index de4790b41be7..3ab3b5323897 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
+@@ -239,7 +239,7 @@ static bool rt2800mmio_txdone_release_entries(struct queue_entry *entry,
+ {
+ 	if (test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) {
+ 		rt2800_txdone_entry(entry, entry->status,
+-				    rt2800mmio_get_txwi(entry));
++				    rt2800mmio_get_txwi(entry), true);
+ 		return false;
+ 	}
+ 
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
+index 205a7b8ac8a7..f11e3f532a84 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
+@@ -501,8 +501,7 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
+ /*
+  * TX control handlers
+  */
+-static enum txdone_entry_desc_flags
+-rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
++static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
+ {
+ 	__le32 *txwi;
+ 	u32 word;
+@@ -515,7 +514,7 @@ rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
+ 	 * frame.
+ 	 */
+ 	if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+-		return TXDONE_FAILURE;
++		return false;
+ 
+ 	wcid	= rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
+ 	ack	= rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
+@@ -537,10 +536,10 @@ rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
+ 		rt2x00_dbg(entry->queue->rt2x00dev,
+ 			   "TX status report missed for queue %d entry %d\n",
+ 			   entry->queue->qid, entry->entry_idx);
+-		return TXDONE_UNKNOWN;
++		return false;
+ 	}
+ 
+-	return TXDONE_SUCCESS;
++	return true;
+ }
+ 
+ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
+@@ -549,7 +548,7 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
+ 	struct queue_entry *entry;
+ 	u32 reg;
+ 	u8 qid;
+-	enum txdone_entry_desc_flags done_status;
++	bool match;
+ 
+ 	while (kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
+ 		/*
+@@ -574,11 +573,8 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
+ 			break;
+ 		}
+ 
+-		done_status = rt2800usb_txdone_entry_check(entry, reg);
+-		if (likely(done_status == TXDONE_SUCCESS))
+-			rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry));
+-		else
+-			rt2x00lib_txdone_noinfo(entry, done_status);
++		match = rt2800usb_txdone_entry_check(entry, reg);
++		rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry), match);
+ 	}
+ }
+ 
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-15-rt2800-status-based-rate-flags-for-nomatch-case.patch

@@ -0,0 +1,88 @@
+From 9d7a7a4d2b02bcd30fb5fe4270278212353cc332 Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 15 Feb 2017 10:25:11 +0100
+Subject: [PATCH 15/19] rt2800: status based rate flags for nomatch case
+
+We use skb_desc->tx_rate_flags from entry as rate[].flags even if
+skb does not match status. Patch corrects flags and also fixes
+mcs for legacy rates.
+
+rt2800_rate_from_status() is based on Felix's mt76
+mt76x2_mac_process_tx_rate() function.
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800.h    |  2 ++
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 35 +++++++++++++++++++++++++-
+ 2 files changed, 36 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800.h b/drivers/net/wireless/ralink/rt2x00/rt2800.h
+index 0e7051d8132f..480b08601785 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
+@@ -1760,6 +1760,8 @@
+ #define TX_STA_FIFO_WCID		FIELD32(0x0000ff00)
+ #define TX_STA_FIFO_SUCCESS_RATE	FIELD32(0xffff0000)
+ #define TX_STA_FIFO_MCS			FIELD32(0x007f0000)
++#define TX_STA_FIFO_BW			FIELD32(0x00800000)
++#define TX_STA_FIFO_SGI			FIELD32(0x01000000)
+ #define TX_STA_FIFO_PHYMODE		FIELD32(0xc0000000)
+ 
+ /*
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+index 4a7bec708a13..8d00c599e47a 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -852,6 +852,39 @@ void rt2800_process_rxwi(struct queue_entry *entry,
+ }
+ EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
+ 
++static void rt2800_rate_from_status(struct skb_frame_desc *skbdesc,
++				    u32 status, enum nl80211_band band)
++{
++	u8 flags = 0;
++	u8 idx = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
++
++	switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) {
++	case RATE_MODE_HT_GREENFIELD:
++		flags |= IEEE80211_TX_RC_GREEN_FIELD;
++		/* fall through */
++	case RATE_MODE_HT_MIX:
++		flags |= IEEE80211_TX_RC_MCS;
++		break;
++	case RATE_MODE_OFDM:
++		if (band == NL80211_BAND_2GHZ)
++			idx += 4;
++		break;
++	case RATE_MODE_CCK:
++		if (idx >= 8)
++			idx -= 8;
++		break;
++	}
++
++	if (rt2x00_get_field32(status, TX_STA_FIFO_BW))
++		flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
++
++	if (rt2x00_get_field32(status, TX_STA_FIFO_SGI))
++		flags |= IEEE80211_TX_RC_SHORT_GI;
++
++	skbdesc->tx_rate_idx = idx;
++	skbdesc->tx_rate_flags = flags;
++}
++
+ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
+ 			 bool match)
+ {
+@@ -898,7 +931,7 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi,
+ 	 * and provide retry count.
+  	 */
+ 	if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) {
+-		skbdesc->tx_rate_idx = real_mcs;
++		rt2800_rate_from_status(skbdesc, status, rt2x00dev->curr_band);
+ 		mcs = real_mcs;
+ 	}
+ 
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-16-rt2800-use-TXOP_BACKOFF-for-probe-frames.patch

@@ -0,0 +1,43 @@
+From fb47ada8dc3c30c8e7b415da155742b49536c61e Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 15 Feb 2017 10:25:12 +0100
+Subject: [PATCH 16/19] rt2800: use TXOP_BACKOFF for probe frames
+
+Even if we do not set AMPDU bit in TXWI, device still can aggregate
+frame and send it with rate not corresponding to requested. That mean
+we can do not sent probe frames with requested rate. To prevent that
+use TXOP_BACKOFF for probe frames.
+
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
+index e1660b92b20c..a2c1ca5c76d1 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
+@@ -372,15 +372,16 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev,
+ 
+ 	/*
+ 	 * Determine IFS values
+-	 * - Use TXOP_BACKOFF for management frames except beacons
++	 * - Use TXOP_BACKOFF for probe and management frames except beacons
+ 	 * - Use TXOP_SIFS for fragment bursts
+ 	 * - Use TXOP_HTTXOP for everything else
+ 	 *
+ 	 * Note: rt2800 devices won't use CTS protection (if used)
+ 	 * for frames not transmitted with TXOP_HTTXOP
+ 	 */
+-	if (ieee80211_is_mgmt(hdr->frame_control) &&
+-	    !ieee80211_is_beacon(hdr->frame_control))
++	if ((ieee80211_is_mgmt(hdr->frame_control) &&
++	     !ieee80211_is_beacon(hdr->frame_control)) ||
++	    (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE))
+ 		txdesc->u.ht.txop = TXOP_BACKOFF;
+ 	else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT))
+ 		txdesc->u.ht.txop = TXOP_SIFS;
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-17-rt2x00-fix-rt2x00debug_dump_frame-comment.patch

@@ -0,0 +1,28 @@
+From dd35cc0896faff5ed9d22eac9ea4a1920e2eec0c Mon Sep 17 00:00:00 2001
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Wed, 15 Feb 2017 10:25:13 +0100
+Subject: [PATCH 17/19] rt2x00: fix rt2x00debug_dump_frame comment
+
+Reported-by: Jeroen Roovers <jer@airfi.aero>
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2x00.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+index 91ba10fdf732..ce340bfd71a0 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+@@ -1396,7 +1396,7 @@ void rt2x00queue_flush_queues(struct rt2x00_dev *rt2x00dev, bool drop);
+  * rt2x00debug_dump_frame - Dump a frame to userspace through debugfs.
+  * @rt2x00dev: Pointer to &struct rt2x00_dev.
+  * @type: The type of frame that is being dumped.
+- * @skb: The skb containing the frame to be dumped.
++ * @entry: The queue entry containing the frame to be dumped.
+  */
+ #ifdef CPTCFG_RT2X00_LIB_DEBUGFS
+ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
+-- 
+2.12.1
+

package/kernel/mac80211/patches/020-18-rt2x00-fix-TX_PWR_CFG_4-register-definition.patch

@@ -0,0 +1,37 @@
+From 5ce33b603063f36272fcfb1b4a5fde69f46eca88 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel@makrotopia.org>
+Date: Thu, 9 Mar 2017 00:54:22 +0100
+Subject: [PATCH 18/19] rt2x00: fix TX_PWR_CFG_4 register definition
+
+Some of the macros used to describe the TX_PWR_CFG_4 register accidentally
+refer to TX_PWR_CFG_3, probably a copy&paste error. Fix that.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800.h | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800.h b/drivers/net/wireless/ralink/rt2x00/rt2800.h
+index 480b08601785..fd1dbd956bad 100644
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
+@@ -1171,10 +1171,10 @@
+ #define TX_PWR_CFG_4_UKNOWN7		FIELD32(0x00000f00)
+ #define TX_PWR_CFG_4_UKNOWN8		FIELD32(0x0000f000)
+ /* bits for 3T devices */
+-#define TX_PWR_CFG_3_STBC4_CH0		FIELD32(0x0000000f)
+-#define TX_PWR_CFG_3_STBC4_CH1		FIELD32(0x000000f0)
+-#define TX_PWR_CFG_3_STBC6_CH0		FIELD32(0x00000f00)
+-#define TX_PWR_CFG_3_STBC6_CH1		FIELD32(0x0000f000)
++#define TX_PWR_CFG_4_STBC4_CH0		FIELD32(0x0000000f)
++#define TX_PWR_CFG_4_STBC4_CH1		FIELD32(0x000000f0)
++#define TX_PWR_CFG_4_STBC6_CH0		FIELD32(0x00000f00)
++#define TX_PWR_CFG_4_STBC6_CH1		FIELD32(0x0000f000)
+ 
+ /*
+  * TX_PIN_CFG:
+-- 
+2.12.1
+