LEDE v17.01.0: adjust config defaults

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://git.lede-project.org/feed/packages.git^cd5c448758f30868770b9ebf8b656c1a4211a240
-src-git luci https://git.lede-project.org/project/luci.git^d3f0685d63c1291359dc5dd089c82fa1e150e0c6
-src-git routing https://git.lede-project.org/feed/routing.git^d11075cd40a88602bf4ba2b275f72100ddcb4767
-src-git telephony https://git.lede-project.org/feed/telephony.git^ac6415e61f147a6892fd2785337aec93ddc68fa9
+src-git packages https://git.lede-project.org/feed/packages.git^ed90827282851ad93294e370860320f1af428bb2
+src-git luci https://git.lede-project.org/project/luci.git^a100738163585ae1edc24d832ca9bef1f34beef0
+src-git routing https://git.lede-project.org/feed/routing.git^dd36dd47bbd75defcb3c517cafe7a19ee425f0af
+src-git telephony https://git.lede-project.org/feed/telephony.git^1f0fb2538ba6fc306198fe2a9a4b976d63adb304

include/cmake.mk

@@ -107,7 +107,3 @@ define Host/Configure/Default
 		$(HOST_CMAKE_SOURCE_DIR) \
 	)
 endef
-
-MAKE_FLAGS += \
-	CMAKE_COMMAND='$$(if $$(CMAKE_DISABLE_$$@),:,$(STAGING_DIR_HOST)/bin/cmake)' \
-	CMAKE_DISABLE_cmake_check_build_system=1

include/host-build.mk

@@ -77,10 +77,6 @@ HOST_MAKE_FLAGS =
 
 HOST_CONFIGURE_CMD = $(BASH) ./configure
 
-ifeq ($(HOST_OS),Darwin)
-  HOST_CONFIG_SITE:=$(INCLUDE_DIR)/site/darwin
-endif
-
 define Host/Configure/Default
 	$(if $(HOST_CONFIGURE_PARALLEL),+)(cd $(HOST_BUILD_DIR)/$(3); \
 		if [ -x configure ]; then \
@@ -131,7 +127,6 @@ define Host/Exports/Default
   $(1) : export PKG_CONFIG_PATH=$$(STAGING_DIR_HOST)/lib/pkgconfig:$$(HOST_BUILD_PREFIX)/lib/pkgconfig
   $(1) : export PKG_CONFIG_LIBDIR=$$(HOST_BUILD_PREFIX)/lib/pkgconfig
   $(1) : export CCACHE_DIR:=$(STAGING_DIR_HOST)/ccache
-  $(if $(HOST_CONFIG_SITE),$(1) : export CONFIG_SITE:=$(HOST_CONFIG_SITE))
   $(if $(IS_PACKAGE_BUILD),$(1) : export PATH=$$(TARGET_PATH_PKG))
 endef
 Host/Exports=$(Host/Exports/Default)

include/image-legacy.mk

@@ -48,7 +48,6 @@ endef
 ifdef TARGET_PER_DEVICE_ROOTFS
   define Image/Build/Profile/Filesystem
 	cp $(KDIR)/root.$(2)+pkg=$(3) $(KDIR)/root.$(2)
-	$(call Image/Build/$(2),$(2))
 	$(call Image/Build/Profile,$(1),$(2))
   endef
 else

include/image.mk

@@ -277,7 +277,7 @@ endif
 
 ifdef CONFIG_TARGET_ROOTFS_CPIOGZ
   define Image/Build/cpiogz
-	( cd $(TARGET_DIR); find . | cpio -o -H newc -R root:root | gzip -9n >$(BIN_DIR)/$(IMG_PREFIX)-rootfs.cpio.gz )
+	( cd $(TARGET_DIR); find . | cpio -o -H newc | gzip -9n >$(BIN_DIR)/$(IMG_PREFIX)-rootfs.cpio.gz )
   endef
 endif
 
@@ -420,7 +420,7 @@ define Device/Build/initramfs
   $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)
 	cp $$^ $$@
 
-  $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/$$(KERNEL_INITRAMFS_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS) image_prepare
+  $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/$$(KERNEL_INITRAMFS_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS)
 	@rm -f $$@
 	$$(call concat_cmd,$$(KERNEL_INITRAMFS))
 endef
@@ -444,7 +444,7 @@ define Device/Build/kernel
     ifdef CONFIG_IB
       install: $$(KDIR_KERNEL_IMAGE)
     endif
-    $$(KDIR_KERNEL_IMAGE): $(KDIR)/$$(KERNEL_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS) image_prepare
+    $$(KDIR_KERNEL_IMAGE): $(KDIR)/$$(KERNEL_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS)
 	@rm -f $$@
 	$$(call concat_cmd,$$(KERNEL))
 	$$(if $$(KERNEL_SIZE),$$(call Build/check-size,$$(KERNEL_SIZE)))

include/kernel-version.mk

@@ -3,10 +3,10 @@
 LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .43
-LINUX_VERSION-4.4 = .92
+LINUX_VERSION-4.4 = .50
 
 LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c
-LINUX_KERNEL_HASH-4.4.92 = 53f8cd8b024444df0f242f8e6ab5147b0b009d7a30e8b2ed3854e8d17937460d
+LINUX_KERNEL_HASH-4.4.50 = e4944ca5bb0bdf63a7e97dc7fbdd38bcc820d8b3b57c4a3a7b3bf9c8a48216b7
 
 ifdef KERNEL_PATCHVER
   LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))

include/kernel.mk

@@ -95,16 +95,15 @@ define ModuleAutoLoad
 	$(SH_FUNC) \
 	export modules=; \
 	probe_module() { \
-		local mods="$$$$$$$$1"; \
-		local boot="$$$$$$$$2"; \
-		local mod; \
+		mods="$$$$$$$$1"; \
+		boot="$$$$$$$$2"; \
 		shift 2; \
-		for mod in $$$$$$$$mods; do \
+		for mod in $(sort $$$$$$$$mods); do \
 			mkdir -p $(2)/etc/modules.d; \
 			echo "$$$$$$$$mod" >> $(2)/etc/modules.d/$(1); \
 		done; \
 		if [ -e $(2)/etc/modules.d/$(1) ]; then \
-			if [ "$$$$$$$$boot" = "1" -a ! -e $(2)/etc/modules-boot.d/$(1) ]; then \
+			if [ "$$$$$$$$boot" = "1" ]; then \
 				mkdir -p $(2)/etc/modules-boot.d; \
 				ln -s ../modules.d/$(1) $(2)/etc/modules-boot.d/; \
 			fi; \
@@ -112,17 +111,16 @@ define ModuleAutoLoad
 		fi; \
 	}; \
 	add_module() { \
-		local priority="$$$$$$$$1"; \
-		local mods="$$$$$$$$2"; \
-		local boot="$$$$$$$$3"; \
-		local mod; \
+		priority="$$$$$$$$1"; \
+		mods="$$$$$$$$2"; \
+		boot="$$$$$$$$3"; \
 		shift 3; \
-		for mod in $$$$$$$$mods; do \
+		for mod in $(sort $$$$$$$$mods); do \
 			mkdir -p $(2)/etc/modules.d; \
 			echo "$$$$$$$$mod" >> $(2)/etc/modules.d/$$$$$$$$priority-$(1); \
 		done; \
 		if [ -e $(2)/etc/modules.d/$$$$$$$$priority-$(1) ]; then \
-			if [ "$$$$$$$$boot" = "1" -a ! -e $(2)/etc/modules-boot.d/$$$$$$$$priority-$(1) ]; then \
+			if [ "$$$$$$$$boot" = "1" ]; then \
 				mkdir -p $(2)/etc/modules-boot.d; \
 				ln -s ../modules.d/$$$$$$$$priority-$(1) $(2)/etc/modules-boot.d/; \
 			fi; \
@@ -131,7 +129,6 @@ define ModuleAutoLoad
 	}; \
 	$(3) \
 	if [ -n "$$$$$$$$modules" ]; then \
-		modules="$$$$$$$$(echo "$$$$$$$$modules" | tr ' ' '\n' | sort | uniq | paste -s -d' ' -)"; \
 		mkdir -p $(2)/etc/modules.d; \
 		mkdir -p $(2)/CONTROL; \
 		echo "#!/bin/sh" > $(2)/CONTROL/postinst-pkg; \

include/site/darwin

@@ -1,2 +0,0 @@
-ac_cv_func_futimens=no
-ac_cv_func_utimensat=no

include/toplevel.mk

@@ -23,7 +23,6 @@ HOSTCC ?= $(CC)
 export REVISION
 export SOURCE_DATE_EPOCH
 export GIT_CONFIG_PARAMETERS='core.autocrlf=false'
-export GIT_ASKPASS:=/bin/true
 export MAKE_JOBSERVER=$(filter --jobserver%,$(MAKEFLAGS))
 
 # prevent perforce from messing with the patch utility
@@ -127,7 +126,7 @@ menuconfig: scripts/config/mconf prepare-tmpinfo FORCE
 	if [ \! -e .config -a -e $(HOME)/.openwrt/defconfig ]; then \
 		cp $(HOME)/.openwrt/defconfig .config; \
 	fi
-	[ -L .config ] && export KCONFIG_OVERWRITECONFIG=1; $< Config.in
+	$< Config.in
 
 prepare_kernel_conf: .config FORCE
 
@@ -171,7 +170,7 @@ else
   DOWNLOAD_DIRS = package/download
 endif
 
-download: .config FORCE $(if $(wildcard $(TOPDIR)/staging_dir/host/bin/flock),,tools/flock/compile)
+download: .config FORCE
 	@+$(foreach dir,$(DOWNLOAD_DIRS),$(SUBMAKE) $(dir);)
 
 clean dirclean: .config

include/version.mk

@@ -31,16 +31,16 @@ qstrip_escape=$(subst ','\'',$(call qstrip,$(1)))
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip_escape,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),17.01.4)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),17.01.0)
 
 VERSION_CODE:=$(call qstrip_escape,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r3560-79f57e422d)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r3205-59508e3)
 
 VERSION_NICK:=$(call qstrip_escape,$(CONFIG_VERSION_NICK))
 VERSION_NICK:=$(if $(VERSION_NICK),$(VERSION_NICK),$(RELEASE))
 
 VERSION_REPO:=$(call qstrip_escape,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),http://downloads.lede-project.org/releases/17.01.4)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),http://downloads.lede-project.org/releases/17.01.0)
 
 VERSION_DIST:=$(call qstrip_escape,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),LEDE)

package/Makefile

@@ -56,7 +56,7 @@ $(curdir)/merge:
 $(curdir)/merge-index: $(curdir)/merge
 	(cd $(PACKAGE_DIR_ALL) && $(SCRIPT_DIR)/ipkg-make-index.sh . 2>&1 > Packages; )
 
-$(curdir)/install: $(TMP_DIR)/.build $(curdir)/system/opkg/host/compile $(curdir)/merge $(if $(CONFIG_TARGET_PER_DEVICE_ROOTFS),$(curdir)/merge-index)
+$(curdir)/install: $(TMP_DIR)/.build $(curdir)/system/opkg/host/install $(curdir)/merge $(if $(CONFIG_TARGET_PER_DEVICE_ROOTFS),$(curdir)/merge-index)
 	- find $(STAGING_DIR_ROOT) -type d | $(XARGS) chmod 0755
 	rm -rf $(TARGET_DIR) $(TARGET_DIR_ORIG)
 	[ -d $(TARGET_DIR)/tmp ] || mkdir -p $(TARGET_DIR)/tmp

package/base-files/Makefile

@@ -11,15 +11,14 @@ include $(INCLUDE_DIR)/kernel.mk
 include $(INCLUDE_DIR)/version.mk
 
 PKG_NAME:=base-files
-PKG_RELEASE:=173.1
+PKG_RELEASE:=172
 PKG_FLAGS:=nonshared
 
 PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
 PKG_BUILD_DEPENDS:=usign/host
 PKG_LICENSE:=GPL-2.0
 
-# Extend depends from version.mk
-PKG_CONFIG_DEPENDS += CONFIG_SIGNED_PACKAGES CONFIG_TARGET_INIT_PATH CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE
+PKG_CONFIG_DEPENDS := CONFIG_SIGNED_PACKAGES CONFIG_TARGET_INIT_PATH CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -138,7 +137,6 @@ define Package/base-files/install
 
 	mkdir -p $(1)/CONTROL
 	mkdir -p $(1)/dev
-	mkdir -p $(1)/etc/config
 	mkdir -p $(1)/etc/crontabs
 	mkdir -p $(1)/etc/rc.d
 	mkdir -p $(1)/overlay

package/base-files/files/bin/config_generate

@@ -119,14 +119,17 @@ generate_network() {
 		;;
 
 		pppoe)
+			# fixup IPv6 slave interface
+			ifname="pppoe-$1"
+
 			uci -q batch <<-EOF
 				set network.$1.proto='pppoe'
 				set network.$1.username='username'
 				set network.$1.password='password'
-				set network.$1.ipv6='1'
+				set network.$1.ipv6='auto'
 				delete network.${1}6
 				set network.${1}6='interface'
-				set network.${1}6.ifname='@${1}'
+				set network.${1}6.ifname='$ifname'
 				set network.${1}6.proto='dhcpv6'
 			EOF
 		;;

package/base-files/files/lib/functions/network.sh

@@ -29,9 +29,18 @@ network_get_ipaddr() {
 # 1: destination variable
 # 2: interface
 network_get_ipaddr6() {
-	__network_ifstatus "$1" "$2" "['ipv6-address'][0].address" || \
-		__network_ifstatus "$1" "$2" "['ipv6-prefix-assignment'][0]['local-address'].address" || \
-		return 1
+	local __addr
+
+	if __network_ifstatus "__addr" "$2" "['ipv6-address','ipv6-prefix-assignment'][0].address"; then
+		case "$__addr" in
+			*:)	export "$1=${__addr}1" ;;
+			*)	export "$1=${__addr}" ;;
+		esac
+		return 0
+	fi
+
+	unset $1
+	return 1
 }
 
 # determine first IPv4 subnet of given logical interface
@@ -45,36 +54,7 @@ network_get_subnet() {
 # 1: destination variable
 # 2: interface
 network_get_subnet6() {
-	local __nets __addr
-
-	if network_get_subnets6 __nets "$2"; then
-		# Attempt to return first non-fe80::/10, non-fc::/7 range
-		for __addr in $__nets; do
-			case "$__addr" in fe[8ab]?:*|f[cd]??:*)
-				continue
-			esac
-			export "$1=$__addr"
-			return 0
-		done
-
-		# Attempt to return first non-fe80::/10 range
-		for __addr in $__nets; do
-			case "$__addr" in fe[8ab]?:*)
-				continue
-			esac
-			export "$1=$__addr"
-			return 0
-		done
-
-		# Return first item
-		for __addr in $__nets; do
-			export "$1=$__addr"
-			return 0
-		done
-	fi
-
-	unset "$1"
-	return 1
+	__network_ifstatus "$1" "$2" "['ipv6-address'][0]['address','mask']" "/"
 }
 
 # determine first IPv6 prefix of given logical interface
@@ -98,19 +78,14 @@ network_get_ipaddrs6() {
 	local __addr
 	local __list=""
 
-	if __network_ifstatus "__addr" "$2" "['ipv6-address'][*].address"; then
+	if __network_ifstatus "__addr" "$2" "['ipv6-address','ipv6-prefix-assignment'][*].address"; then
 		for __addr in $__addr; do
-			__list="${__list:+$__list }${__addr}"
+			case "$__addr" in
+				*:) __list="${__list:+$__list }${__addr}1" ;;
+				*)  __list="${__list:+$__list }${__addr}"  ;;
+			esac
 		done
-	fi
 
-	if __network_ifstatus "__addr" "$2" "['ipv6-prefix-assignment'][*]['local-address'].address"; then
-		for __addr in $__addr; do
-			__list="${__list:+$__list }${__addr}"
-		done
-	fi
-
-	if [ -n "$__list" ]; then
 		export "$1=$__list"
 		return 0
 	fi
@@ -123,13 +98,18 @@ network_get_ipaddrs6() {
 # 1: destination variable
 # 2: interface
 network_get_ipaddrs_all() {
-	local __addr __addr6
+	local __addr
+	local __list=""
 
-	network_get_ipaddrs __addr "$2"
-	network_get_ipaddrs6 __addr6 "$2"
+	if __network_ifstatus "__addr" "$2" "['ipv4-address','ipv6-address','ipv6-prefix-assignment'][*].address"; then
+		for __addr in $__addr; do
+			case "$__addr" in
+				*:) __list="${__list:+$__list }${__addr}1" ;;
+				*)  __list="${__list:+$__list }${__addr}"  ;;
+			esac
+		done
 
-	if [ -n "$__addr" -o -n "$__addr6" ]; then
-		export "$1=${__addr:+$__addr }$__addr6"
+		export "$1=$__list"
 		return 0
 	fi
 
@@ -148,24 +128,17 @@ network_get_subnets() {
 # 1: destination variable
 # 2: interface
 network_get_subnets6() {
-	local __addr __mask
+	local __addr
 	local __list=""
 
-	if __network_ifstatus "__addr" "$2" "['ipv6-address'][*]['address','mask']" "/ "; then
+	if __network_ifstatus "__addr" "$2" "['ipv6-address','ipv6-prefix-assignment'][*]['address','mask']" "/ "; then
 		for __addr in $__addr; do
-			__list="${__list:+$__list }${__addr}"
+			case "$__addr" in
+				*:/*) __list="${__list:+$__list }${__addr%/*}1/${__addr##*/}" ;;
+				*)    __list="${__list:+$__list }${__addr}"                   ;;
+			esac
 		done
-	fi
 
-	if __network_ifstatus "__addr" "$2" "['ipv6-prefix-assignment'][*]['local-address'].address" && \
-	   __network_ifstatus "__mask" "$2" "['ipv6-prefix-assignment'][*].mask"; then
-		for __addr in $__addr; do
-			__list="${__list:+$__list }${__addr}/${__mask%% *}"
-			__mask="${__mask#* }"
-		done
-	fi
-
-	if [ -n "$__list" ]; then
 		export "$1=$__list"
 		return 0
 	fi

package/base-files/files/lib/functions/uci-defaults.sh

@@ -35,7 +35,7 @@ _ucidef_set_interface() {
 	json_select_object "$name"
 	json_add_string ifname "$iface"
 
-	if ! json_is_a protocol string || [ -n "$proto" ]; then
+	if ! json_is_a protocol string; then
 		case "$proto" in
 			static|dhcp|none|pppoe) : ;;
 			*)
@@ -619,26 +619,6 @@ ucidef_add_gpio_switch() {
 	json_select ..
 }
 
-ucidef_set_hostname() {
-	local hostname="$1"
-
-	json_select_object system
-		json_add_string hostname "$hostname"
-	json_select ..
-}
-
-ucidef_set_ntpserver() {
-	local server
-
-	json_select_object system
-		json_select_array ntpserver
-			for server in "$@"; do
-				json_add_string "" "$server"
-			done
-		json_select ..
-	json_select ..
-}
-
 board_config_update() {
 	json_init
 	[ -f ${CFG} ] && json_load "$(cat ${CFG})"

package/base-files/files/lib/preinit/10_indicate_preinit

@@ -96,8 +96,6 @@ preinit_config_board() {
 }
 
 preinit_ip() {
-	[ "$pi_preinit_no_failsafe" = "y" ] && return
-
 	# if the preinit interface isn't specified and ifname is set in
 	# preinit.arch use that interface
 	if [ -z "$pi_ifname" ]; then
@@ -109,8 +107,6 @@ preinit_ip() {
 	elif [ -d "/etc/board.d/" ]; then
 		preinit_config_board
 	fi
-
-	preinit_net_echo "Doing Lede Preinit\n"
 }
 
 preinit_ip_deconfig() {
@@ -150,6 +146,7 @@ preinit_echo() {
 }
 
 pi_indicate_preinit() {
+	preinit_net_echo "Doing Lede Preinit\n"
 	set_state preinit
 }
 

package/base-files/files/sbin/wifi

@@ -6,8 +6,8 @@
 
 usage() {
 	cat <<EOF
-Usage: $0 [config|down|reload|status]
-enables (default), disables or configures devices not yet configured.
+Usage: $0 [down|detect|reload|status]
+enables (default), disables or detects a wifi configuration.
 EOF
 	exit 1
 }
@@ -145,12 +145,6 @@ wifi_reload() {
 	wifi_reload_legacy
 }
 
-wifi_detect_notice() {
-	>&2 echo "WARNING: Wifi detect is deprecated. Use wifi config instead"
-	>&2 echo "For more information, see commit 5f8f8a366136a07df661e31decce2458357c167a"
-	exit 1
-}
-
 wifi_config() {
 	[ ! -f /etc/config/wireless ] && touch /etc/config/wireless
 
@@ -235,7 +229,7 @@ scan_wifi
 
 case "$1" in
 	down) wifi_updown "disable" "$2";;
-	detect) wifi_detect_notice ;;
+	detect) ;;
 	config) wifi_config ;;
 	status) ubus_wifi_cmd "status" "$2";;
 	reload) wifi_reload "$2";;

package/base-files/image-config.in

@@ -190,7 +190,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "http://downloads.lede-project.org/releases/17.01.4"
+		default "http://downloads.lede-project.org/releases/17.01.0"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:
@@ -262,7 +262,7 @@ if VERSIONOPT
 	config VERSION_CODE_FILENAMES
 		bool
 		prompt "Revision code in filenames"
-		default n
+		default y
 		help
 			Enable this to include the revision identifier or the configured
 			version code into the firmware image, SDK- and Image Builder archive

package/boot/grub2/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=grub
-PKG_VERSION:=2.02~rc1
+PKG_VERSION:=2.02~beta3
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
@@ -17,7 +17,7 @@ PKG_SOURCE_URL:=http://alpha.gnu.org/gnu/grub \
 	http://gnualpha.uib.no/grub/ \
 	http://mirrors.fe.up.pt/pub/gnu-alpha/grub/ \
 	http://www.nic.funet.fi/pub/gnu/alpha/gnu/grub/
-PKG_HASH:=445239e9b96d1143c194c1d37851cf4196b83701c60172e49665e9d453d80278
+PKG_HASH:=30ec3d555e52a702c3eef449872ef874eff28b320f40b55ffc47f70db8e5ada1
 
 PKG_FIXUP:=autoreconf
 HOST_BUILD_PARALLEL:=1

package/boot/uboot-envtools/files/ar71xx

@@ -18,7 +18,6 @@ a40|\
 a60|\
 alfa-ap120c|\
 all0258n|\
-ap121f|\
 ap90q|\
 cap324|\
 cap4200ag|\

package/devel/binutils/patches/0001-Do-not-pass-host-compiler-sanitization-flags-on-to-l.patch

@@ -1,65 +0,0 @@
-From 183eb37e25d903ccd68cc2d8f8a37e75872c03d2 Mon Sep 17 00:00:00 2001
-From: Nick Clifton <nickc@redhat.com>
-Date: Tue, 6 Sep 2016 17:35:35 +0100
-Subject: [PATCH 1/2] Do not pass host compiler sanitization flags on to linker
- testsuite.
-
-	* Makefile.am (CFLAGS_FOR_TARGET): Define as a copy of CFLAGS but
-	without any sanitization options.
-	(CXXFLAGS_FOR_TARGET): Define as a copy of CXXFLAGS but	without
-	any sanitization options.
-	(check-DEJAGNU): Pass CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET
-	as CFLAGS and CXXFLAGS respectively.
----
- ld/Makefile.am | 8 ++++++--
- ld/Makefile.in | 8 ++++++--
- 2 files changed, 12 insertions(+), 4 deletions(-)
-
---- a/ld/Makefile.am
-+++ b/ld/Makefile.am
-@@ -136,6 +136,10 @@ CXX_FOR_TARGET = ` \
-     fi; \
-   fi`
- 
-+# Strip out sanitization options as we want to test building binaries without any extra paraphernalia
-+CFLAGS_FOR_TARGET = `echo $(CFLAGS) | sed -e 's/-fsanitize=address//g' -e 's/-fsanitize=undefined//g'`
-+CXXFLAGS_FOR_TARGET = `echo $(CXXFLAGS) | sed -e 's/-fsanitize=address//g' -e 's/-fsanitize=undefined//g'`
-+
- transform = s/^ld-new$$/$(installed_linker)/;@program_transform_name@
- bin_PROGRAMS = ld-new
- info_TEXINFOS = ld.texinfo
-@@ -2075,8 +2079,8 @@ check-DEJAGNU: site.exp
- 	runtest=$(RUNTEST); \
- 	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
- 	  $$runtest --tool $(DEJATOOL) --srcdir $${srcroot}/testsuite \
--		CC="$(CC_FOR_TARGET)" CFLAGS="$(CFLAGS)" \
--		CXX="$(CXX_FOR_TARGET)" CXXFLAGS="$(CXXFLAGS)" \
-+		CC="$(CC_FOR_TARGET)" CFLAGS="$(CFLAGS_FOR_TARGET)" \
-+		CXX="$(CXX_FOR_TARGET)" CXXFLAGS="$(CXXFLAGS_FOR_TARGET)" \
- 		CC_FOR_HOST="$(CC)" CFLAGS_FOR_HOST="$(CFLAGS)" \
- 		OFILES="$(OFILES)" BFDLIB="$(TESTBFDLIB)" \
- 		LIBIBERTY="$(LIBIBERTY) $(LIBINTL)" LIBS="$(LIBS)" \
---- a/ld/Makefile.in
-+++ b/ld/Makefile.in
-@@ -507,6 +507,10 @@ CXX_FOR_TARGET = ` \
-     fi; \
-   fi`
- 
-+
-+# Strip out sanitization options as they require special host libraries.
-+CFLAGS_FOR_TARGET = `echo $(CFLAGS) | sed -e 's/-fsanitize=address//g' -e 's/-fsanitize=undefined//g'`
-+CXXFLAGS_FOR_TARGET = `echo $(CXXFLAGS) | sed -e 's/-fsanitize=address//g' -e 's/-fsanitize=undefined//g'`
- info_TEXINFOS = ld.texinfo
- ld_TEXINFOS = configdoc.texi
- noinst_TEXINFOS = ldint.texinfo
-@@ -3644,8 +3648,8 @@ check-DEJAGNU: site.exp
- 	runtest=$(RUNTEST); \
- 	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
- 	  $$runtest --tool $(DEJATOOL) --srcdir $${srcroot}/testsuite \
--		CC="$(CC_FOR_TARGET)" CFLAGS="$(CFLAGS)" \
--		CXX="$(CXX_FOR_TARGET)" CXXFLAGS="$(CXXFLAGS)" \
-+		CC="$(CC_FOR_TARGET)" CFLAGS="$(CFLAGS_FOR_TARGET)" \
-+		CXX="$(CXX_FOR_TARGET)" CXXFLAGS="$(CXXFLAGS_FOR_TARGET)" \
- 		CC_FOR_HOST="$(CC)" CFLAGS_FOR_HOST="$(CFLAGS)" \
- 		OFILES="$(OFILES)" BFDLIB="$(TESTBFDLIB)" \
- 		LIBIBERTY="$(LIBIBERTY) $(LIBINTL)" LIBS="$(LIBS)" \

package/firmware/ath10k-firmware/Makefile

@@ -32,11 +32,6 @@ $(Package/ath10k-firmware-default)
   TITLE:=ath10k firmware for QCA9887 devices
 endef
 
-define Package/ath10k-firmware-qca9887-ct
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k-CT firmware for QCA9887 devices
-endef
-
 QCA9887_REV:=3cce88e245f2d685e49411c4f80998f94baf67b8
 QCA9887_FIRMWARE_FILE:=firmware-5.bin_10.2.4-1.0-00013
 QCA9887_FIRMWARE_FILE_HASH:=5966408bd41f309edb595344b8dd088c0fed212debfd91e5f3e8a55ea119c16d
@@ -63,6 +58,7 @@ $(eval $(call Download,ath10k-qca9887-board))
 
 define Package/ath10k-firmware-qca988x
 $(Package/ath10k-firmware-default)
+  DEFAULT:=PACKAGE_kmod-ath10k
   TITLE:=ath10k firmware for QCA988x devices
   SECTION:=firmware
   CATEGORY:=Firmware
@@ -76,20 +72,13 @@ define Download/ct-firmware
   URL_FILE:=$($(1)_FIRMWARE_FILE_CT)
 endef
 
-QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community.bin-19-rc3-lede
+QCA988X_FIRMWARE_FILE_CT:=firmware-2-ct-full-community.bin-19.rc1-lede
 define Download/ath10k-firmware-qca988x-ct
   $(call Download/ct-firmware,QCA988X,)
-  HASH:=4112d78161a2c20e7a9490ea8d04e9f919508bafb097d88761dcce026c26f93f
+  HASH:=ad41b29a9eebf1066f993beb571f3bd13f14ea89336ef9d4f3b31ee57e7abe54
 endef
 $(eval $(call Download,ath10k-firmware-qca988x-ct))
 
-QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community.bin-19-rc3-lede
-define Download/ath10k-firmware-qca9887-ct
-  $(call Download/ct-firmware,QCA9887,ath10k-9887)
-  HASH:=18b61875726d4384de46f75dec1d42fea31aa6d66dba4940cb9d375bc98732e4
-endef
-$(eval $(call Download,ath10k-firmware-qca9887-ct))
-
 QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-9.bin-lede.001
 define Download/ath10k-firmware-qca99x0-ct
   $(call Download/ct-firmware,QCA99X0,ath10k-10-4)
@@ -118,13 +107,6 @@ $(Package/ath10k-firmware-default)
   CATEGORY:=Firmware
 endef
 
-define Package/ath10k-firmware-qca9887-ct
-$(Package/ath10k-firmware-default)
-  TITLE:=ath10k CT 10.1 firmware for QCA9887 devices
-  SECTION:=firmware
-  CATEGORY:=Firmware
-endef
-
 define Package/ath10k-firmware-qca988x-ct/description
 Alternative ath10k firmware for QCA988X from Candela Technologies.
 Enables IBSS and other features.  See:
@@ -134,14 +116,6 @@ is un-selected since the driver will try to load firmware-5.bin before
 firmware-2.bin
 endef
 
-define Package/ath10k-firmware-qca9887-ct/description
-Alternative ath10k firmware for QCA9887 from Candela Technologies.
-Enables IBSS and other features.  See:
-http://www.candelatech.com/ath10k-10.1.php
-This firmware conflicts with the standard 9887 firmware, so select only
-one.
-endef
-
 define Package/ath10k-firmware-qca99x0-ct/description
 Alternative ath10k firmware for QCA99x0 from Candela Technologies.
 Enables IBSS and other features.  See:
@@ -203,18 +177,18 @@ define Download/qca99x0-board
 endef
 $(eval $(call Download,qca99x0-board))
 
-QCA9984_BOARD_REV:=719c0127e52bd70559e71b85ab0331790e1bf66c
+QCA9984_BOARD_REV:=deb1832c56c706d0f6cb539113e09f0daaa52b5f
 QCA9984_BOARD_FILE:=board-2.bin
 QCA9984_BOARD_FILE_DL:=$(QCA9984_BOARD_FILE).$(QCA9984_BOARD_REV)
-QCA9984_FIRMWARE_REV:=d43cb1188154037506e94abf3aa456cc934c6861
-QCA9984_FIRMWARE_FILE:=firmware-5.bin_10.4-3.4-00072
+QCA9984_FIRMWARE_REV:=deb1832c56c706d0f6cb539113e09f0daaa52b5f
+QCA9984_FIRMWARE_FILE:=firmware-5.bin_10.4-3.3-00102
 QCA9984_FIRMWARE_FILE_DL:=$(QCA9984_FIRMWARE_FILE).$(QCA9984_FIRMWARE_REV)
 
 define Download/ath10k-qca9984-board
   URL:=https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA9984/hw1.0/
   URL_FILE:=$(QCA9984_BOARD_FILE)?id=$(QCA9984_BOARD_REV)
   FILE:=$(QCA9984_BOARD_FILE_DL)
-  HASH:=e968b214fd76d5b7859f71841ce40fbd5f47336c3ccbaf95e23f902f5e569aef
+  HASH:=6a79ff0e8cc71549e771b41dbb7dad862d8e29da852f8aff25ce1e4bd5ea263e
 endef
 $(eval $(call Download,ath10k-qca9984-board))
 
@@ -222,7 +196,7 @@ define Download/ath10k-qca9984-firmware
   URL:=https://source.codeaurora.org/quic/qsdk/oss/firmware/ath10k-firmware/plain/ath10k/QCA9984/hw1.0/
   URL_FILE:=$(QCA9984_FIRMWARE_FILE)?id=$(QCA9984_FIRMWARE_REV)
   FILE:=$(QCA9984_FIRMWARE_FILE_DL)
-  HASH:=28d5834e8c4ca8fcef9ea033cd8b9b0f9ee84ecf30dbde84c9c64bf8dd9912bc
+  HASH:=490ad52df76a4fa8004a3a8c21dd43bb8262dd2816df48a6408706b82491f299
 endef
 $(eval $(call Download,ath10k-qca9984-firmware))
 
@@ -250,16 +224,6 @@ define Package/ath10k-firmware-qca988x/install
 		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin
 endef
 
-define Package/ath10k-firmware-qca9887-ct/install
-	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9887) \
-		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/firmware-2.bin
-	$(INSTALL_DATA) \
-		$(DL_DIR)/$(QCA9887_BOARD_FILE_DL) \
-		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
-endef
-
 define Package/ath10k-firmware-qca988x-ct/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
 	$(INSTALL_DATA) \
@@ -333,7 +297,6 @@ $(eval $(call BuildPackage,ath10k-firmware-qca99x0))
 $(eval $(call BuildPackage,ath10k-firmware-qca6174))
 $(eval $(call BuildPackage,ath10k-firmware-qca9984))
 
-$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct))
 $(eval $(call BuildPackage,ath10k-firmware-qca988x-ct))
 $(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct))
 $(eval $(call BuildPackage,ath10k-firmware-qca9984-ct))

package/firmware/linux-firmware/marvell.mk

@@ -20,15 +20,6 @@ define Package/mwifiex-pcie-firmware/install
 endef
 $(eval $(call BuildPackage,mwifiex-pcie-firmware))
 
-Package/mwifiex-sdio-firmware = $(call Package/firmware-default,Marvell 8887 firmware)
-define Package/mwifiex-sdio-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/mrvl
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/mrvl/sd8887_uapsta.bin \
-		$(1)/lib/firmware/mrvl/
-endef
-$(eval $(call BuildPackage,mwifiex-sdio-firmware))
-
 Package/libertas-usb-firmware = $(call Package/firmware-default,Marvell 8388/8682 USB firmware)
 define Package/libertas-usb-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/libertas

package/kernel/acx-mac80211/patches/300-api_sync.patch

@@ -81,32 +81,3 @@
  
  	adev->channel = channel;
  
---- a/merge.c
-+++ b/merge.c
-@@ -2776,7 +2776,10 @@ void acx_irq_work(struct work_struct *wo
- 		/* HOST_INT_SCAN_COMPLETE */
- 		if (irqmasked & HOST_INT_SCAN_COMPLETE) {
- 			if (test_bit(ACX_FLAG_SCANNING, &adev->flags)) {
--				ieee80211_scan_completed(adev->hw, false);
-+				struct cfg80211_scan_info info = {
-+					.aborted = false
-+				};
-+				ieee80211_scan_completed(adev->hw, &info);
- 				log(L_INIT, "scan completed\n");
- 				clear_bit(ACX_FLAG_SCANNING, &adev->flags);
- 			}
-@@ -3138,10 +3141,13 @@ int acx_op_start(struct ieee80211_hw *hw
- 
- void acx_stop(acx_device_t *adev)
- {
-+	struct cfg80211_scan_info info = {
-+		.aborted = true
-+	};
- 	acxmem_lock_flags;
- 
- 	if (test_bit(ACX_FLAG_SCANNING, &adev->flags)) {
--		ieee80211_scan_completed(adev->hw, true);
-+		ieee80211_scan_completed(adev->hw, &info);
- 		acx_issue_cmd(adev, ACX1xx_CMD_STOP_SCAN, NULL, 0);
- 		clear_bit(ACX_FLAG_SCANNING, &adev->flags);
- 	}

package/kernel/ath10k-ct/Makefile

@@ -8,9 +8,9 @@ PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2017-01-26
-PKG_SOURCE_VERSION:=d2bc84ff277936c58231f0c2280242eda4199e63
-PKG_MIRROR_HASH:=6b734b987db00b97b06faca686dcebc56fb23b93093afbb35d5cf534987269bf
+PKG_SOURCE_DATE:=2017-01-10
+PKG_SOURCE_VERSION:=f5bacb83baf95e887c50c286606f4f565ef71d86
+PKG_MIRROR_HASH:=845950a177ed6dd7ad3f645df79403e9980f089a09b66e74a9b88abe58dfe5e6
 
 PKG_MAINTAINER:=Ben Greear <greearb@candelatech.com>
 PKG_BUILD_PARALLEL:=1
@@ -23,7 +23,7 @@ include $(INCLUDE_DIR)/package.mk
 define KernelPackage/ath10k-ct
   SUBMENU:=Wireless Drivers
   TITLE:=ath10k-ct driver optimized for CT ath10k firmware
-  DEPENDS:=+kmod-mac80211 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT @PCI_SUPPORT +@KERNEL_RELAY +kmod-hwmon-core
+  DEPENDS:=+kmod-mac80211 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT @PCI_SUPPORT +@KERNEL_RELAY
   FILES:=\
 	$(PKG_BUILD_DIR)/ath10k/ath10k_pci.ko \
 	$(PKG_BUILD_DIR)/ath10k/ath10k_core.ko

package/kernel/ath10k-ct/patches/100-kernel_compat.patch

@@ -1,97 +0,0 @@
---- a/ath10k/debug.c
-+++ b/ath10k/debug.c
-@@ -166,11 +166,11 @@ void ath10k_debug_print_hwfw_info(struct
- 		    ar->id.subsystem_vendor, ar->id.subsystem_device);
- 
- 	ath10k_info(ar, "kconfig debug %d debugfs %d tracing %d dfs %d testmode %d\n",
--		    config_enabled(CONFIG_ATH10K_DEBUG),
--		    config_enabled(CONFIG_ATH10K_DEBUGFS),
--		    config_enabled(CONFIG_ATH10K_TRACING),
--		    config_enabled(CONFIG_ATH10K_DFS_CERTIFIED),
--		    config_enabled(CONFIG_NL80211_TESTMODE));
-+		    IS_ENABLED(CONFIG_ATH10K_DEBUG),
-+		    IS_ENABLED(CONFIG_ATH10K_DEBUGFS),
-+		    IS_ENABLED(CONFIG_ATH10K_TRACING),
-+		    IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED),
-+		    IS_ENABLED(CONFIG_NL80211_TESTMODE));
- 
- 	firmware = ar->normal_mode_fw.fw_file.firmware;
- 	if (firmware)
-@@ -3397,7 +3397,7 @@ int ath10k_debug_register(struct ath10k
- 	debugfs_create_file("nf_cal_period", S_IRUSR | S_IWUSR,
- 			    ar->debug.debugfs_phy, ar, &fops_nf_cal_period);
- 
--	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
-+	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) {
- 		debugfs_create_file("dfs_simulate_radar", S_IWUSR,
- 				    ar->debug.debugfs_phy, ar,
- 				    &fops_simulate_radar);
---- a/ath10k/mac.c
-+++ b/ath10k/mac.c
-@@ -3556,7 +3556,7 @@ static void ath10k_regd_update(struct at
- 
- 	regpair = ar->ath_common.regulatory.regpair;
- 
--	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
-+	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
- 		nl_dfs_reg = ar->dfs_detector->region;
- 		wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg);
- 		ath10k_dbg(ar, ATH10K_DBG_REGULATORY,
-@@ -3590,7 +3590,7 @@ static void ath10k_reg_notifier(struct w
- 
- 	ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
- 
--	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
-+	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) {
- 		ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "reg-notifier: dfs region 0x%x\n",
- 			   request->dfs_region);
- 		result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector,
-@@ -8863,7 +8863,7 @@ int ath10k_mac_register(struct ath10k *a
- 	if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
- 		ar->hw->netdev_features = NETIF_F_HW_CSUM;
- 
--	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
-+	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) {
- 		/* Init ath dfs pattern detector */
- 		ar->ath_common.debug_mask = ATH_DBG_DFS;
- 		ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common,
-@@ -8908,7 +8908,7 @@ err_unregister:
- 	ieee80211_unregister_hw(ar->hw);
- 
- err_dfs_detector_exit:
--	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
-+	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
- 		ar->dfs_detector->exit(ar->dfs_detector);
- 
- err_free:
-@@ -8923,7 +8923,7 @@ void ath10k_mac_unregister(struct ath10k
- {
- 	ieee80211_unregister_hw(ar->hw);
- 
--	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
-+	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector)
- 		ar->dfs_detector->exit(ar->dfs_detector);
- 
- 	kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
---- a/ath10k/thermal.c
-+++ b/ath10k/thermal.c
-@@ -192,7 +192,7 @@ int ath10k_thermal_register(struct ath10
- 
- 	/* Avoid linking error on devm_hwmon_device_register_with_groups, I
- 	 * guess linux/hwmon.h is missing proper stubs. */
--	if (!config_enabled(CONFIG_HWMON))
-+	if (!IS_ENABLED(CONFIG_HWMON))
- 		return 0;
- 
- 	hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev,
---- a/ath10k/wmi.c
-+++ b/ath10k/wmi.c
-@@ -3788,7 +3788,7 @@ void ath10k_wmi_event_dfs(struct ath10k
- 		   phyerr->tsf_timestamp, tsf, buf_len);
- 
- 	/* Skip event if DFS disabled */
--	if (!config_enabled(CONFIG_ATH10K_DFS_CERTIFIED))
-+	if (!IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED))
- 		return;
- 
- 	ATH10K_DFS_STAT_INC(ar, pulses_total);

package/kernel/ath10k-ct/patches/110-api_fix.patch

@@ -1,11 +0,0 @@
---- a/ath10k/htt_rx.c
-+++ b/ath10k/htt_rx.c
-@@ -2490,7 +2490,7 @@ bool ath10k_htt_t2h_msg_handler(struct a
- 		u32 freq = __le32_to_cpu(resp->chan_change.freq);
- 
- 		ar->tgt_oper_chan =
--			__ieee80211_get_channel(ar->hw->wiphy, freq);
-+			ieee80211_get_channel(ar->hw->wiphy, freq);
- 		ath10k_dbg(ar, ATH10K_DBG_HTT,
- 			   "htt chan change freq %u phymode %s\n",
- 			   freq, ath10k_wmi_phymode_str(phymode));

package/kernel/brcm2708-gpu-fw/Makefile

@@ -1,6 +1,6 @@
 #
 # Copyright (C) 2012-2016 OpenWrt.org
-# Copyright (C) 2017 LEDE project
+# Copyright (C) 2016 LEDE project
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -9,8 +9,8 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=brcm2708-gpu-fw
-PKG_VERSION:=2017-03-03
-PKG_RELEASE:=78c4983379de0537f49a97fb37ceaaf42632b28c
+PKG_VERSION:=2016-12-04
+PKG_RELEASE:=d760a4ffd378c648ff5d9854e26dc868a5e1fd09
 
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)/rpi-firmware-$(PKG_RELEASE)
 
@@ -33,7 +33,7 @@ define Download/bootcode_bin
   FILE:=$(RPI_FIRMWARE_FILE)-bootcode.bin
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=bootcode.bin
-  HASH:=d990031baec20fe2cd5e24d9f3d6fc34891afdb128838d010d9a0249ae29ea6b
+  HASH:=a11bd31647c25712648757be75a19fa78c1df6f2409c7bf9bd202903f0421c0c
 endef
 $(eval $(call Download,bootcode_bin))
 
@@ -41,7 +41,7 @@ define Download/fixup_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup.dat
-  HASH:=38b69384f62bc7b64f17dcedc03c5582af6b4f8dfc25fe5904d4eb3181a3387b
+  HASH:=93314d9e01fb53bdf4a25422de89d103cd2e779bd5e81663c658eaecd0c8018e
 endef
 $(eval $(call Download,fixup_dat))
 
@@ -49,7 +49,7 @@ define Download/fixup_cd_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup_cd.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup_cd.dat
-  HASH:=05c682ffcc74cd1356f1b9a32a7034763bfea94e5cb54eaaa2e69affc1cd33d7
+  HASH:=638671b81590bfdda5eac683d2025e50bb71c663e702f047ef299e23722f6cdd
 endef
 $(eval $(call Download,fixup_cd_dat))
 
@@ -57,7 +57,7 @@ define Download/start_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start.elf
-  HASH:=59b9d26b463a84f017fae186493bb54e642de6c7e0376b3cbe3375df6132edc0
+  HASH:=cd60fdce9022fa1195a27f3fdf8eba9136476649006e33b72cbdb23dc3b74e90
 endef
 $(eval $(call Download,start_elf))
 
@@ -65,7 +65,7 @@ define Download/start_cd_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start_cd.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start_cd.elf
-  HASH:=fb9aea03eb6790062c100166444bf7d2b8a6cea605bd041f905fcacefacbbae2
+  HASH:=2f0cdcdaad7b9bf64f5288e206d54e007597c0c4068a5b893c02e0f4c0785ca5
 endef
 $(eval $(call Download,start_cd_elf))
 

package/kernel/ep80579-drivers/Makefile

@@ -0,0 +1,92 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ep80579-drivers
+PKG_VERSION:=1.0.34
+PKG_RELEASE:=1
+
+PKG_SOURCE:=Embedded.L.1.0.34.ADI.R100.tar.gz
+PKG_SOURCE_URL:=ftp://ftp.adiengineering.com/Archive/OcracokeIsland/Drivers/Linux/1.0.34/
+PKG_HASH:=f00684176a3dd1dc9ea8d96ecd1ecade5103f351ed93b9e3a5ff5f3f3295e2a9
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/ep80579-drivers/Default
+  DEPENDS:=@TARGET_x86_ep80579
+endef
+
+define KernelPackage/ep80579-eth
+$(call KernelPackage/ep80579-drivers/Default)
+  SUBMENU:=Network Devices
+  TITLE:=Intel EP80579 ethernet driver
+  FILES:= \
+	$(PKG_BUILD_DIR)/Embedded/src/GbE/gcu.ko \
+	$(PKG_BUILD_DIR)/Embedded/src/GbE/iegbe.ko
+  AUTOLOAD:=$(call AutoLoad,40,gcu iegbe)
+endef
+
+define KernelPackage/ep80579-misc
+$(call KernelPackage/ep80579-drivers/Default)
+  SUBMENU:=Other modules
+  TITLE:=Misc. Intel EP80579 drivers (DMA,, gpio)
+  FILES:= \
+	$(PKG_BUILD_DIR)/Embedded/src/EDMA/dma.ko \
+	$(PKG_BUILD_DIR)/Embedded/src/GPIO/gpio.ko
+  AUTOLOAD:=$(call AutoLoad,40,gpio dma)
+endef
+
+define KernelPackage/ep80579-can
+$(call KernelPackage/ep80579-drivers/Default)
+  SUBMENU:=Other modules
+  TITLE:=Intel EP80579 CAN driver
+  FILES:= \
+	$(PKG_BUILD_DIR)/Embedded/src/1588/timesync.ko \
+	$(PKG_BUILD_DIR)/Embedded/src/CAN/can.ko
+  AUTOLOAD:=$(call AutoLoad,40,timesync can)
+endef
+
+define Build/Prepare
+	rm -rf $(PKG_BUILD_DIR)
+	mkdir -p $(PKG_BUILD_DIR)
+	tar xzvf $(DL_DIR)/$(PKG_SOURCE) -C $(PKG_BUILD_DIR)/
+	$(Build/Patch)
+endef
+
+define Build/Compile/Subdir
+	$(MAKE) -C "$(LINUX_DIR)" \
+		KSRC="$(LINUX_DIR)" \
+		KOBJ="$(LINUX_DIR)" \
+		ENV_DIR=$(PKG_BUILD_DIR)/Embedded \
+		SUBDIRS="$(PKG_BUILD_DIR)/Embedded/src/$(1)" \
+		CROSS_COMPILE="$(TARGET_CROSS)" \
+		ARCHIVER="$(TARGET_CROSS)ar" \
+		COMPILER="$(TARGET_CC)" \
+		LINKER="$(TARGET_CROSS)ld" \
+		ARCH="$(LINUX_KARCH)"
+endef
+
+define Build/Compile
+	$(call Build/Compile/Subdir,GbE)
+	$(call Build/Compile/Subdir,CAN)
+	$(call Build/Compile/Subdir,EDMA)
+	$(call Build/Compile/Subdir,GPIO)
+	$(call Build/Compile/Subdir,WDT)
+	$(call Build/Compile/Subdir,1588)
+endef
+
+define KernelPackage/ep80579-eth/install
+endef
+
+$(eval $(call KernelPackage,ep80579-can))
+$(eval $(call KernelPackage,ep80579-eth))
+$(eval $(call KernelPackage,ep80579-misc))
+

package/kernel/ep80579-drivers/patches/002-cflags_cleanup.patch

@@ -0,0 +1,22 @@
+--- a/build_system/build_files/common.mk
++++ b/build_system/build_files/common.mk
+@@ -122,7 +122,7 @@ CC=$(COMPILER)
+ LD=$(LINKER)
+ AR=$(ARCHIVER)
+ 
+-CFLAGS+=-O2
++#CFLAGS+=-O2
+ 
+ 
+ PWD= $(shell pwd)
+--- a/build_system/build_files/OS/linux_2.6.mk
++++ b/build_system/build_files/OS/linux_2.6.mk
+@@ -80,7 +80,7 @@ endif
+ 
+ 
+ ifeq ($(OS_LEVEL), kernel_space)
+-CFLAGS+= 
++#CFLAGS+= 
+ endif
+ 
+ 

package/kernel/ep80579-drivers/patches/003-new_irqf_constants.patch

@@ -0,0 +1,53 @@
+--- a/Embedded/src/1588/1588.c
++++ b/Embedded/src/1588/1588.c
+@@ -291,7 +291,7 @@ int pci_probe(struct pci_dev *dev, const
+ 
+     }
+ 
+-    if ( request_irq(dev->irq, &timesync_isr, SA_SHIRQ, DRIVERNAME,
++    if ( request_irq(dev->irq, &timesync_isr, IRQF_SHARED, DRIVERNAME,
+          &g_drvr_data) )
+     {
+       printk("%s-pci_probe: irq\n", DRIVERNAME);
+--- a/Embedded/src/CAN/can_main.c
++++ b/Embedded/src/CAN/can_main.c
+@@ -424,7 +424,7 @@ int can_open(struct inode *inode, struct
+     err = request_irq(
+         can_os->irq,
+         can_irq_handler,
+-        SA_SHIRQ,
++        IRQF_SHARED,
+         iminor(can_os->inode) ? CAN_PROC_1 : CAN_PROC_0,
+         &(g_can_os[iminor(can_os->inode)])
+         );
+--- a/Embedded/src/EDMA/dma_linux.c
++++ b/Embedded/src/EDMA/dma_linux.c
+@@ -367,7 +367,7 @@ int32_t edma_resume(struct pci_dev *dev)
+         return -ENODEV;
+     }
+ 
+-    if (request_irq(dev->irq, &edma_irq_handler, SA_SHIRQ,
++    if (request_irq(dev->irq, &edma_irq_handler, IRQF_SHARED,
+                         g_char_drvr_name, dev) )
+     {
+ 
+@@ -829,7 +829,7 @@ int32_t edma_probe(struct pci_dev * dev,
+     /*
+     * Obtain a (shared) Interrupt Request (IRQ) Line from the OS.
+     */
+-    if (request_irq(dev->irq, &edma_irq_handler, SA_SHIRQ,
++    if (request_irq(dev->irq, &edma_irq_handler, IRQF_SHARED,
+                         g_char_drvr_name, dev) )
+     {
+ 
+--- a/Embedded/src/WDT/iwdt.c
++++ b/Embedded/src/WDT/iwdt.c
+@@ -1461,7 +1461,7 @@ static int __init wdt_init_one(struct pc
+ 
+      /* Request irq only if wdt_irq is other than 0 */
+      if (wdt_irq) {
+-        if (request_irq(wdt_irq, wdt_isr, SA_INTERRUPT | SA_SHIRQ,
++        if (request_irq(wdt_irq, wdt_isr, IRQF_DISABLED | IRQF_SHARED,
+            "iwdt", &wdt_miscdev)) {
+            printk("IRQ %d is not free.\n", wdt_irq);
+            return -EIO;

package/kernel/ep80579-drivers/patches/100-iegbe_netdev_ops.patch

@@ -0,0 +1,56 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -724,6 +724,26 @@ static void iegbe_dump_eeprom(struct ieg
+ 	kfree(data);
+ }
+ 
++static const struct net_device_ops iegbe_netdev_ops = {
++	.ndo_open		= iegbe_open,
++	.ndo_stop		= iegbe_close,
++	.ndo_start_xmit		= iegbe_xmit_frame,
++	.ndo_get_stats		= iegbe_get_stats,
++	.ndo_set_rx_mode	= iegbe_set_rx_mode,
++	.ndo_set_mac_address	= iegbe_set_mac,
++	.ndo_tx_timeout		= iegbe_tx_timeout,
++	.ndo_change_mtu		= iegbe_change_mtu,
++	.ndo_do_ioctl		= iegbe_ioctl,
++	.ndo_validate_addr	= eth_validate_addr,
++
++	.ndo_vlan_rx_register	= iegbe_vlan_rx_register,
++	.ndo_vlan_rx_add_vid	= iegbe_vlan_rx_add_vid,
++	.ndo_vlan_rx_kill_vid	= iegbe_vlan_rx_kill_vid,
++#ifdef CONFIG_NET_POLL_CONTROLLER
++	.ndo_poll_controller	= iegbe_netpoll,
++#endif
++};
++
+ /**
+  * iegbe_probe - Device Initialization Routine
+  * @pdev: PCI device information struct
+@@ -800,24 +820,11 @@ static int __devinit iegbe_probe(struct
+ 	if (!hw->hw_addr)
+         goto err_ioremap;
+ 
+-    netdev->open = &iegbe_open;
+-    netdev->stop = &iegbe_close;
+-    netdev->hard_start_xmit = &iegbe_xmit_frame;
+-    netdev->get_stats = &iegbe_get_stats;
+-	netdev->set_rx_mode = &iegbe_set_rx_mode;
+-	netdev->set_mac_address = &iegbe_set_mac;
+-    netdev->change_mtu = &iegbe_change_mtu;
+-    netdev->do_ioctl = &iegbe_ioctl;
++	netdev->netdev_ops = &iegbe_netdev_ops;
+ 	set_ethtool_ops(netdev);
+-    netdev->tx_timeout = &iegbe_tx_timeout;
+ 	netdev->watchdog_timeo = 5 * HZ;
+ 	netif_napi_add(netdev, &adapter->napi, iegbe_clean, 64);
+-    netdev->vlan_rx_register = iegbe_vlan_rx_register;
+-    netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
+-    netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
+-#ifdef CONFIG_NET_POLL_CONTROLLER
+-    netdev->poll_controller = iegbe_netpoll;
+-#endif
++
+ 	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+ 
+ 

package/kernel/ep80579-drivers/patches/101-iegbe_fix_napi_interface.patch

@@ -0,0 +1,41 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -3465,12 +3465,12 @@ static irqreturn_t iegbe_intr_msi(int ir
+ 	    printk("Critical error! ICR = 0x%x\n", icr);
+ 	    return IRQ_HANDLED;
+ 	}
+-	if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
++	if (likely(napi_schedule_prep(&adapter->napi))) {
+ 		adapter->total_tx_bytes = 0;
+ 		adapter->total_tx_packets = 0;
+ 		adapter->total_rx_bytes = 0;
+ 		adapter->total_rx_packets = 0;
+-		__netif_rx_schedule(netdev, &adapter->napi);
++		__napi_schedule(&adapter->napi);
+ 	} else
+ 		iegbe_irq_enable(adapter);
+ 
+@@ -3527,12 +3527,12 @@ iegbe_intr(int irq, void *data)
+ 		E1000_WRITE_REG(&adapter->hw, IMC, ~0);
+ 		E1000_WRITE_FLUSH(&adapter->hw);
+ 	}
+-	if (likely(netif_rx_schedule_prep(netdev, &adapter->napi))) {
++	if (likely(napi_schedule_prep(&adapter->napi))) {
+ 		adapter->total_tx_bytes = 0;
+ 		adapter->total_tx_packets = 0;
+ 		adapter->total_rx_bytes = 0;
+ 		adapter->total_rx_packets = 0;
+-		__netif_rx_schedule(netdev, &adapter->napi);
++		__napi_schedule(&adapter->napi);
+ 	} else
+ 		/* this really should not happen! if it does it is basically a
+ 		 * bug, but not a hard error, so enable ints and continue */
+@@ -3574,7 +3574,7 @@ static int iegbe_clean(struct napi_struc
+ 	if (work_done < budget) {
+ 		if (likely(adapter->itr_setting & 3))
+ 			iegbe_set_itr(adapter);
+-		netif_rx_complete(poll_dev, napi);
++		napi_complete(napi);
+ 		iegbe_irq_enable(adapter);
+ 	}
+ 

package/kernel/ep80579-drivers/patches/102-iegbe_nuke_polling_netdev.patch

@@ -0,0 +1,103 @@
+--- a/Embedded/src/GbE/iegbe.h
++++ b/Embedded/src/GbE/iegbe.h
+@@ -316,7 +316,6 @@ struct iegbe_adapter {
+ 				int cleaned_count);
+ 	struct iegbe_rx_ring *rx_ring;      /* One per active queue */
+ 	struct napi_struct napi;
+-	struct net_device *polling_netdev;  /* One per active queue */
+ 
+ 	int num_tx_queues;
+ 	int num_rx_queues;
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -763,7 +763,7 @@ static int __devinit iegbe_probe(struct
+ 	struct iegbe_hw *hw;
+ 
+ 	static int cards_found = 0;
+-    int i, err, pci_using_dac;
++	int err, pci_using_dac;
+ 	u16 eeprom_data = 0;
+ 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ 	int bars; 
+@@ -984,11 +984,8 @@ err_eeprom:
+ 		iegbe_phy_hw_reset(hw);
+ 	if (hw->flash_address)
+ 		iounmap(hw->flash_address);
+-	for (i = 0; i < adapter->num_rx_queues; i++)
+-		dev_put(&adapter->polling_netdev[i]);
+ 	kfree(adapter->tx_ring);
+ 	kfree(adapter->rx_ring);
+-	kfree(adapter->polling_netdev);
+ err_sw_init:
+ 	iounmap(hw->hw_addr);
+ err_ioremap:
+@@ -1017,7 +1014,6 @@ iegbe_remove(struct pci_dev *pdev)
+     struct net_device *netdev = pci_get_drvdata(pdev);
+     struct iegbe_adapter *adapter = netdev_priv(netdev);
+     uint32_t manc;
+-    int i;
+ 
+     if(adapter->hw.mac_type >= iegbe_82540
+        && adapter->hw.mac_type != iegbe_icp_xxxx
+@@ -1030,15 +1026,11 @@ iegbe_remove(struct pci_dev *pdev)
+     }
+ 
+     unregister_netdev(netdev);
+-    for (i = 0x0; i < adapter->num_rx_queues; i++)
+-		dev_put(&adapter->polling_netdev[i]);
+-
+     if(!iegbe_check_phy_reset_block(&adapter->hw)) {
+         iegbe_phy_hw_reset(&adapter->hw);
+     }
+     kfree(adapter->tx_ring);
+     kfree(adapter->rx_ring);
+-    kfree(adapter->polling_netdev);
+ 
+     iounmap(adapter->hw.hw_addr);
+     pci_release_regions(pdev);
+@@ -1061,7 +1053,6 @@ iegbe_sw_init(struct iegbe_adapter *adap
+     struct iegbe_hw *hw = &adapter->hw;
+     struct net_device *netdev = adapter->netdev;
+     struct pci_dev *pdev = adapter->pdev;
+-    int i;
+ 
+     /* PCI config space info */
+ 
+@@ -1111,11 +1102,6 @@ iegbe_sw_init(struct iegbe_adapter *adap
+ 		return -ENOMEM;
+ 	}
+ 
+-	for (i = 0; i < adapter->num_rx_queues; i++) {
+-		adapter->polling_netdev[i].priv = adapter;
+-		dev_hold(&adapter->polling_netdev[i]);
+-		set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
+-	}
+ 	spin_lock_init(&adapter->tx_queue_lock);
+ 
+         /*
+@@ -1137,8 +1123,7 @@ iegbe_sw_init(struct iegbe_adapter *adap
+  * @adapter: board private structure to initialize
+  *
+  * We allocate one ring per queue at run-time since we don't know the
+- * number of queues at compile-time.  The polling_netdev array is
+- * intended for Multiqueue, but should work fine with a single queue.
++ * number of queues at compile-time.
+  **/
+ 
+ static int __devinit
+@@ -1158,15 +1143,6 @@ iegbe_alloc_queues(struct iegbe_adapter
+ 		return -ENOMEM;
+ 	}
+ 
+-	adapter->polling_netdev = kcalloc(adapter->num_rx_queues,
+-	                                  sizeof(struct net_device),
+-	                                  GFP_KERNEL);
+-	if (!adapter->polling_netdev) {
+-		kfree(adapter->tx_ring);
+-		kfree(adapter->rx_ring);
+-		return -ENOMEM;
+-	}
+-
+     return E1000_SUCCESS;
+ }
+ 

package/kernel/ep80579-drivers/patches/103-iegbe_convert_unicast_addr_list.patch

@@ -0,0 +1,60 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -2161,7 +2161,8 @@ static void iegbe_set_rx_mode(struct net
+ {
+ 	struct iegbe_adapter *adapter = netdev_priv(netdev);
+ 	struct iegbe_hw *hw = &adapter->hw;
+-	struct dev_addr_list *uc_ptr;
++	struct netdev_hw_addr *ha;
++	bool use_uc = false;
+ 	struct dev_addr_list *mc_ptr;
+ 	u32 rctl;
+ 	u32 hash_value;
+@@ -2187,12 +2188,11 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ 		}
+ 	}
+ 
+-	uc_ptr = NULL;
+ 	if (netdev->uc_count > rar_entries - 1) {
+ 		rctl |= E1000_RCTL_UPE;
+ 	} else if (!(netdev->flags & IFF_PROMISC)) {
+ 		rctl &= ~E1000_RCTL_UPE;
+-		uc_ptr = netdev->uc_list;
++		use_uc = true;
+ 	}
+ 
+ 	E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
+@@ -2210,13 +2210,20 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ 	 * if there are not 14 addresses, go ahead and clear the filters
+ 	 * -- with 82571 controllers only 0-13 entries are filled here
+ 	 */
++	i = 1;
++	if (use_uc)
++		list_for_each_entry(ha, &netdev->uc_list, list) {
++			if (i == rar_entries)
++				break;
++			iegbe_rar_set(hw, ha->addr, i++);
++		}
++
++	WARN_ON(i == rar_entries);
++
+ 	mc_ptr = netdev->mc_list;
+ 
+-	for (i = 1; i < rar_entries; i++) {
+-		if (uc_ptr) {
+-			iegbe_rar_set(hw, uc_ptr->da_addr, i);
+-			uc_ptr = uc_ptr->next;
+-		} else if (mc_ptr) {		
++	for (; i < rar_entries; i++) {
++		if (mc_ptr) {
+ 			iegbe_rar_set(hw, mc_ptr->da_addr, i);
+ 			mc_ptr = mc_ptr->next;
+ 		} else {
+@@ -2226,7 +2233,6 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ 			E1000_WRITE_FLUSH(&adapter->hw);
+ 		}
+ 	}
+-	WARN_ON(uc_ptr != NULL);
+ 
+ 	/* clear the old settings from the multicast hash table */
+ 

package/kernel/ep80579-drivers/patches/104-iegbe_group_address_list_and_its_count.patch

@@ -0,0 +1,20 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -2188,7 +2188,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ 		}
+ 	}
+ 
+-	if (netdev->uc_count > rar_entries - 1) {
++	if (netdev->uc.count > rar_entries - 1) {
+ 		rctl |= E1000_RCTL_UPE;
+ 	} else if (!(netdev->flags & IFF_PROMISC)) {
+ 		rctl &= ~E1000_RCTL_UPE;
+@@ -2212,7 +2212,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ 	 */
+ 	i = 1;
+ 	if (use_uc)
+-		list_for_each_entry(ha, &netdev->uc_list, list) {
++		list_for_each_entry(ha, &netdev->uc.list, list) {
+ 			if (i == rar_entries)
+ 				break;
+ 			iegbe_rar_set(hw, ha->addr, i++);

package/kernel/ep80579-drivers/patches/105-iegbe_new_dma_masks.patch

@@ -0,0 +1,20 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -775,13 +775,13 @@ static int __devinit iegbe_probe(struct
+ 	if (err)
+         return err;
+ 
+-	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+-	    !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
++	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) &&
++	    !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ 		pci_using_dac = 1;
+         } else {
+-             err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
++             err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+    	     if (err) {
+-			err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
++			err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ 			if (err) {
+ 				E1000_ERR("No usable DMA configuration, "
+ 					  "aborting\n");

package/kernel/ep80579-drivers/patches/106-iegbe_new_irqf_constant.patch

@@ -0,0 +1,12 @@
+--- a/Embedded/src/GbE/iegbe_ethtool.c
++++ b/Embedded/src/GbE/iegbe_ethtool.c
+@@ -944,7 +944,8 @@ iegbe_intr_test(struct iegbe_adapter *ad
+     *data = 0;
+ 
+     /* Hook up test interrupt handler just for this test */
+-     if(!request_irq(irq, &iegbe_test_intr, 0, netdev->name, netdev)) {
++     if(!request_irq(irq, &iegbe_test_intr, IRQF_PROBE_SHARED, netdev->name,
++			netdev)) {
+          shared_int = FALSE;
+      } else if(request_irq(irq, &iegbe_test_intr, IRQF_SHARED,
+                   netdev->name, netdev)){

package/kernel/ep80579-drivers/patches/150-ocracoke_island.patch

@@ -0,0 +1,747 @@
+--- a/Embedded/src/GbE/iegbe_oem_phy.c
++++ b/Embedded/src/GbE/iegbe_oem_phy.c
+@@ -65,6 +65,10 @@ static int32_t iegbe_oem_link_m88_setup(
+ static int32_t iegbe_oem_set_phy_mode(struct iegbe_hw *hw);
+ static int32_t iegbe_oem_detect_phy(struct iegbe_hw *hw);
+ 
++static int32_t iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw);
++static int32_t bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data);
++static int32_t oi_phy_setup (struct iegbe_hw *hw);
++
+ /**
+  * iegbe_oem_setup_link
+  * @hw: iegbe_hw struct containing device specific information
+@@ -114,6 +118,10 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+     }
+ 
+     switch (hw->phy_id) {
++	case BCM5395S_PHY_ID:
++		return E1000_SUCCESS;
++		break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
+             ret_val = iegbe_oem_link_m88_setup(hw);
+@@ -121,6 +129,12 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+                 return ret_val; 
+             }
+         break; 
++	case BCM5481_PHY_ID:
++		ret_val = iegbe_oem_link_bcm5481_setup(hw);
++		if(ret_val) { 
++			return ret_val; 
++		}
++		break; 
+         default:
+             DEBUGOUT("Invalid PHY ID\n");
+             return -E1000_ERR_PHY_TYPE;
+@@ -179,6 +193,51 @@ iegbe_oem_setup_link(struct iegbe_hw *hw
+ #endif /* ifdef EXTERNAL_MDIO */
+ }
+ 
++/**
++ * iegbe_oem_link_bcm5481_setup
++ * @hw: iegbe_hw struct containing device specific information
++ *
++ * Returns E1000_SUCCESS, negative E1000 error code on failure
++ *
++ * copied verbatim from iegbe_oem_link_m88_setup
++ **/
++static int32_t
++iegbe_oem_link_bcm5481_setup(struct iegbe_hw *hw)
++{
++	int32_t ret_val;
++	uint16_t phy_data;
++
++	//DEBUGFUNC(__func__);
++
++	if(!hw)
++		return -1;
++
++	/* phy_reset_disable is set in iegbe_oem_set_phy_mode */
++	if(hw->phy_reset_disable)
++		return E1000_SUCCESS;
++
++	// Enable MDIX in extended control reg.
++	ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ECTRL, &phy_data);
++	if(ret_val)
++	{
++		DEBUGOUT("Unable to read BCM5481_ECTRL register\n");
++		return ret_val;
++	}
++
++	phy_data &= ~BCM5481_ECTRL_DISMDIX;
++	ret_val = iegbe_oem_write_phy_reg_ex(hw, BCM5481_ECTRL, phy_data);
++	if(ret_val)
++	{
++		DEBUGOUT("Unable to write BCM5481_ECTRL register\n");
++		return ret_val;
++	}
++
++	ret_val = oi_phy_setup (hw);
++	if (ret_val)
++		return ret_val;
++
++	return E1000_SUCCESS;
++}
+ 
+ /**
+  * iegbe_oem_link_m88_setup
+@@ -340,6 +399,11 @@ iegbe_oem_force_mdi(struct iegbe_hw *hw,
+      * see iegbe_phy_force_speed_duplex, which does the following for M88
+      */
+       switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++		case BCM5481_PHY_ID:
++			DEBUGOUT("WARNING: An empty iegbe_oem_force_mdi() has been called!\n");
++			break;
++
+           case M88E1000_I_PHY_ID:
+           case M88E1141_E_PHY_ID:
+               ret_val = iegbe_oem_read_phy_reg_ex(hw, 
+@@ -415,6 +479,8 @@ iegbe_oem_phy_reset_dsp(struct iegbe_hw
+      switch (hw->phy_id) {
+          case M88E1000_I_PHY_ID:
+          case M88E1141_E_PHY_ID:
++		case BCM5481_PHY_ID:
++		case BCM5395S_PHY_ID:
+              DEBUGOUT("No DSP to reset on OEM PHY\n");
+          break;
+          default:
+@@ -460,6 +526,11 @@ iegbe_oem_cleanup_after_phy_reset(struct
+      * see iegbe_phy_force_speed_duplex, which does the following for M88
+      */
+     switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++		case BCM5481_PHY_ID:
++            DEBUGOUT("WARNING: An empty iegbe_oem_cleanup_after_phy_reset() has been called!\n");
++        break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
+             /*
+@@ -573,6 +644,11 @@ iegbe_oem_set_phy_mode(struct iegbe_hw *
+      * use iegbe_set_phy_mode as example
+      */
+     switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++		case BCM5481_PHY_ID:
++             DEBUGOUT("WARNING: An empty iegbe_oem_set_phy_mode() has been called!\n");
++         break;
++
+          case M88E1000_I_PHY_ID:
+          case M88E1141_E_PHY_ID:
+              ret_val = iegbe_read_eeprom(hw, 
+@@ -641,6 +717,19 @@ iegbe_oem_detect_phy(struct iegbe_hw *hw
+     }
+     hw->phy_type = iegbe_phy_oem;
+ 
++{
++	// If MAC2 (BCM5395 switch), manually detect the phy
++	struct iegbe_adapter *adapter;
++	uint32_t device_number;
++	adapter = (struct iegbe_adapter *) hw->back;
++	device_number = PCI_SLOT(adapter->pdev->devfn);
++	if (device_number == ICP_XXXX_MAC_2) {
++		hw->phy_id = BCM5395S_PHY_ID;
++		hw->phy_revision = 0;
++		return E1000_SUCCESS;
++	}
++}
++
+     ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_ID1, &phy_id_high);
+     if(ret_val) {
+         DEBUGOUT("Unable to read PHY register PHY_ID1\n");
+@@ -690,6 +779,8 @@ iegbe_oem_get_tipg(struct iegbe_hw *hw)
+     switch (hw->phy_id) {
+          case M88E1000_I_PHY_ID:
+          case M88E1141_E_PHY_ID:
++		case BCM5481_PHY_ID:
++		case BCM5395S_PHY_ID:
+              phy_num = DEFAULT_ICP_XXXX_TIPG_IPGT;
+          break;
+          default:
+@@ -738,6 +829,8 @@ iegbe_oem_phy_is_copper(struct iegbe_hw
+     switch (hw->phy_id) {
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
++		case BCM5481_PHY_ID:
++		case BCM5395S_PHY_ID:
+             isCopper = TRUE;
+         break;
+         default:
+@@ -796,13 +889,13 @@ iegbe_oem_get_phy_dev_number(struct iegb
+ 	switch(device_number)
+     {
+       case ICP_XXXX_MAC_0: 
+-	      hw->phy_addr = 0x00;
++	      hw->phy_addr = 0x01;
+ 	  break;
+       case ICP_XXXX_MAC_1: 
+-	      hw->phy_addr = 0x01;
++	      hw->phy_addr = 0x02;
+ 	  break;
+       case ICP_XXXX_MAC_2: 
+-	      hw->phy_addr = 0x02;
++	      hw->phy_addr = 0x00;
+ 	  break;
+ 	  default:  hw->phy_addr = 0x00;
+     }
+@@ -851,6 +944,12 @@ iegbe_oem_mii_ioctl(struct iegbe_adapter
+     if(!adapter || !ifr) {
+         return -1;
+     }
++
++	// If MAC2 (BCM5395 switch) then leave now
++	if ((PCI_SLOT(adapter->pdev->devfn)) == ICP_XXXX_MAC_2) {
++			return -1;
++	}
++
+     switch (data->reg_num) {
+         case PHY_CTRL:
+             if(mii_reg & MII_CR_POWER_DOWN) {
+@@ -987,6 +1086,11 @@ void iegbe_oem_get_phy_regs(struct iegbe
+      * [10] = mdix mode
+      */
+     switch (adapter->hw.phy_id) {
++	case BCM5395S_PHY_ID:
++	case BCM5481_PHY_ID:
++		DEBUGOUT("WARNING: An empty iegbe_oem_get_phy_regs() has been called!\n");
++	break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
+             if(corrected_len > 0) {
+@@ -1068,8 +1172,13 @@ iegbe_oem_phy_loopback(struct iegbe_adap
+      * Loopback configuration is the same for each of the supported PHYs.
+      */
+     switch (adapter->hw.phy_id) {
++		case BCM5395S_PHY_ID:
++			DEBUGOUT("WARNING: An empty iegbe_oem_phy_loopback() has been called!\n");
++			break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
++		case BCM5481_PHY_ID:
+ 
+           adapter->hw.autoneg = FALSE;
+ 
+@@ -1182,8 +1291,14 @@ iegbe_oem_loopback_cleanup(struct iegbe_
+     }
+ 
+     switch (adapter->hw.phy_id) {
++		case BCM5395S_PHY_ID:
++		DEBUGOUT("WARNING: An empty iegbe_oem_loopback_cleanup() has been called!\n");
++		return;
++		break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
++		case BCM5481_PHY_ID:
+         default:
+             adapter->hw.autoneg = TRUE;
+         
+@@ -1243,6 +1358,11 @@ iegbe_oem_phy_speed_downgraded(struct ie
+      */
+ 
+     switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++		case BCM5481_PHY_ID:
++			*isDowngraded = 0;
++			break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
+             ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, 
+@@ -1305,6 +1425,11 @@ iegbe_oem_check_polarity(struct iegbe_hw
+      */
+ 
+     switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++		case BCM5481_PHY_ID:
++			*polarity = 0;
++			break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
+             /* return the Polarity bit in the Status register. */
+@@ -1367,6 +1492,25 @@ iegbe_oem_phy_is_full_duplex(struct iegb
+      */
+         
+       switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++			/* Always full duplex */
++			*isFD = 1;
++			break;
++
++		case BCM5481_PHY_ID:
++			ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
++			if(ret_val) return ret_val;
++
++				switch (BCM5481_ASTAT_HCD(phy_data)) {
++					case BCM5481_ASTAT_1KBTFD:
++					case BCM5481_ASTAT_100BTXFD:
++						*isFD = 1;
++						break;
++					default:
++						*isFD = 0;
++				}
++			break;
++
+           case M88E1000_I_PHY_ID:
+           case M88E1141_E_PHY_ID:
+              ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS,
+@@ -1423,6 +1567,25 @@ iegbe_oem_phy_is_speed_1000(struct iegbe
+      */
+ 
+     switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++			/* Always 1000mb */
++			*is1000 = 1;
++			break;
++
++		case BCM5481_PHY_ID:
++			ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
++			if(ret_val) return ret_val;
++
++				switch (BCM5481_ASTAT_HCD(phy_data)) {
++					case BCM5481_ASTAT_1KBTFD:
++					case BCM5481_ASTAT_1KBTHD:
++						*is1000 = 1;
++					break;
++				default:
++					*is1000 = 0;
++				}
++			break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
+             ret_val = iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, 
+@@ -1478,6 +1641,25 @@ iegbe_oem_phy_is_speed_100(struct iegbe_
+      * see iegbe_config_mac_to_phy
+      */
+     switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++			/* Always 1000Mb, never 100mb */
++			*is100 = 0;
++			break;
++
++		case BCM5481_PHY_ID:
++			ret_val = iegbe_read_phy_reg(hw, BCM5481_ASTAT, &phy_data);
++			if(ret_val) return ret_val;
++
++			switch (BCM5481_ASTAT_HCD(phy_data)) {
++				case BCM5481_ASTAT_100BTXFD:
++				case BCM5481_ASTAT_100BTXHD:
++					*is100 = 1;
++					break;
++				default:
++					*is100 = 0;
++			}
++			break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
+             ret_val = iegbe_oem_read_phy_reg_ex(hw, 
+@@ -1535,6 +1717,11 @@ iegbe_oem_phy_get_info(struct iegbe_hw *
+      * see iegbe_phy_m88_get_info
+      */
+     switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++		case BCM5481_PHY_ID:
++			DEBUGOUT("WARNING: An empty iegbe_oem_phy_get_info() has been called!\n");
++			break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
+   /* The downshift status is checked only once, after link is
+@@ -1636,8 +1823,13 @@ iegbe_oem_phy_hw_reset(struct iegbe_hw *
+      * the M88 used in truxton. 
+      */
+     switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++			DEBUGOUT("WARNING: An empty iegbe_oem_phy_hw_reset() has been called!\n");
++			break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
++		case BCM5481_PHY_ID:
+             ret_val = iegbe_oem_read_phy_reg_ex(hw, PHY_CTRL, &phy_data);
+             if(ret_val) {
+                 DEBUGOUT("Unable to read register PHY_CTRL\n");
+@@ -1699,6 +1891,8 @@ iegbe_oem_phy_init_script(struct iegbe_h
+     switch (hw->phy_id) {
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
++		case BCM5481_PHY_ID:
++		case BCM5395S_PHY_ID:
+             DEBUGOUT("Nothing to do for OEM PHY Init");
+         break;
+         default:
+@@ -1735,6 +1929,11 @@ iegbe_oem_read_phy_reg_ex(struct iegbe_h
+         return -1;
+     }
+ 
++	if (hw->phy_id == BCM5395S_PHY_ID) {
++		DEBUGOUT("WARNING: iegbe_oem_read_phy_reg_ex() has been unexpectedly called!\n");
++		return -1;
++	}
++
+     /* call the GCU func that will read the phy
+      * 
+      * Make note that the M88 phy is what'll be used on Truxton.
+@@ -1782,6 +1981,11 @@ iegbe_oem_set_trans_gasket(struct iegbe_
+     }
+ 
+      switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++		case BCM5481_PHY_ID:
++			DEBUGOUT("WARNING: An empty iegbe_oem_set_trans_gasket() has been called!\n");
++			break;
++
+          case M88E1000_I_PHY_ID:
+          case M88E1141_E_PHY_ID:
+          /* Gasket set correctly for Marvell Phys, so nothing to do */
+@@ -1886,6 +2090,8 @@ iegbe_oem_phy_needs_reset_with_mac(struc
+     switch (hw->phy_id) {
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
++		case BCM5481_PHY_ID:
++		case BCM5395S_PHY_ID:
+             ret_val = FALSE;
+         break;
+         default:
+@@ -1935,6 +2141,8 @@ iegbe_oem_config_dsp_after_link_change(s
+     switch (hw->phy_id) {
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
++		case BCM5481_PHY_ID:
++		case BCM5395S_PHY_ID:
+             DEBUGOUT("No DSP to configure on OEM PHY");
+         break;
+         default:
+@@ -1978,6 +2186,12 @@ iegbe_oem_get_cable_length(struct iegbe_
+     }
+ 
+     switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++		case BCM5481_PHY_ID:
++			*min_length = 0;
++			*max_length = iegbe_igp_cable_length_150;
++			break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
+             ret_val = iegbe_oem_read_phy_reg_ex(hw, 
+@@ -2061,6 +2275,23 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
+      */
+ 
+     switch (hw->phy_id) {
++		case BCM5395S_PHY_ID:
++			/* Link always up */
++			*isUp = TRUE;
++			return E1000_SUCCESS;
++			break;
++
++		case BCM5481_PHY_ID:
++			iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
++			ret_val = iegbe_oem_read_phy_reg_ex(hw, BCM5481_ESTAT, &phy_data);
++			if(ret_val)
++			{
++				DEBUGOUT("Unable to read PHY register BCM5481_ESTAT\n");
++				return ret_val;
++			}
++			statusMask = BCM5481_ESTAT_LINK;
++			break;
++
+         case M88E1000_I_PHY_ID:
+         case M88E1141_E_PHY_ID:
+             iegbe_oem_read_phy_reg_ex(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); 
+@@ -2092,3 +2323,210 @@ iegbe_oem_phy_is_link_up(struct iegbe_hw
+ #endif /* ifdef EXTERNAL_MDIO */
+ }
+ 
++
++
++//-----
++// Read BCM5481 expansion register
++//
++int32_t
++bcm5481_read_ex (struct iegbe_hw *hw, uint16_t reg, uint16_t *data)
++{
++	int ret;
++	uint16_t selector;
++	uint16_t reg_data;
++
++	// Get the current value of bits 15:12
++	ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &selector);
++	if (ret)
++		return ret;
++
++	// Select the expansion register
++	selector &= 0xf000;
++	selector |= (0xf << 8) | (reg);
++	iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
++
++	// Read the expansion register
++	ret = iegbe_oem_read_phy_reg_ex (hw, 0x15, &reg_data);
++
++	// De-select the expansion registers.
++	selector &= 0xf000;
++	iegbe_oem_write_phy_reg_ex (hw, 0x17, selector);
++
++	if (ret)
++		return ret;
++
++	*data = reg_data;
++	return ret;
++}
++
++//-----
++//	Read reg 0x18 sub-register
++//
++static int32_t
++bcm5481_read_18sv (struct iegbe_hw *hw, int sv, uint16_t *data)
++{
++	int	ret;
++	uint16_t	tmp_data;
++
++	// Select reg 0x18, sv
++	tmp_data = ((sv & BCM5481_R18H_SV_MASK) << 12) | BCM5481_R18H_SV_MCTRL;
++	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, tmp_data);
++	if(ret)
++		return ret;
++
++	// Read reg 0x18, sv
++	ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R18H, &tmp_data);
++	if(ret)
++		return ret;
++
++	*data = tmp_data;
++	return ret;
++}
++
++//-----
++//	Read reg 0x1C sub-register
++//
++int32_t
++bcm5481_read_1csv (struct iegbe_hw *hw, int sv, uint16_t *data)
++{
++	int ret;
++	uint16_t tmp_data;
++
++	// Select reg 0x1c, sv
++	tmp_data = ((sv & BCM5481_R1CH_SV_MASK) << BCM5481_R1CH_SV_SHIFT);
++
++	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, tmp_data);
++	if(ret)
++		return ret;
++
++	// Read reg 0x1c, sv
++	ret = iegbe_oem_read_phy_reg_ex (hw, BCM5481_R1CH, &tmp_data);
++	if(ret)
++		return ret;
++
++	*data = tmp_data;
++	return ret;
++}
++
++//-----
++//	Read-modify-write a 0x1C register.
++//
++//	hw   - hardware access info.
++//	reg  - 0x1C register to modify.
++//	data - bits which should be set.
++//	mask - the '1' bits in this argument will be cleared in the data
++//         read from 'reg' then 'data' will be or'd in and the result
++//         will be written to 'reg'.
++
++int32_t
++bcm5481_rmw_1csv (struct iegbe_hw *hw, uint16_t reg, uint16_t data, uint16_t mask)
++{
++	int32_t		ret;
++	uint16_t	reg_data;
++
++	ret = 0;
++
++	ret = bcm5481_read_1csv (hw, reg, &reg_data);
++	if (ret)
++	{
++		DEBUGOUT("Unable to read BCM5481 1CH register\n");
++		printk (KERN_ERR "Unable to read BCM5481 1CH register [0x%x]\n", reg);
++		return ret;
++	}
++
++	reg_data &= ~mask;
++	reg_data |= (BCM5481_R1CH_WE | data);
++
++	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, reg_data);
++	if(ret)
++	{
++		DEBUGOUT("Unable to write BCM5481 1CH register\n");
++		printk (KERN_ERR "Unable to write BCM5481 1CH register\n");
++		return ret;
++	}
++
++	return ret;
++}
++
++int32_t
++oi_phy_setup (struct iegbe_hw *hw)
++{
++	int	ret;
++	uint16_t	pmii_data;
++	uint16_t	mctrl_data;
++	uint16_t	cacr_data;
++
++	ret = 0;
++
++	// Set low power mode via reg 0x18, sv010, bit 6
++	// Do a read-modify-write on reg 0x18, sv010 register to preserve existing bits.
++	ret = bcm5481_read_18sv (hw, BCM5481_R18H_SV_PMII, &pmii_data);
++	if (ret)
++	{
++		DEBUGOUT("Unable to read BCM5481_R18H_SV_PMII register\n");
++		printk (KERN_ERR "Unable to read BCM5481_R18H_SV_PMII register\n");
++		return ret;
++	}
++
++	// Set the LPM bit in the data just read and write back to sv010
++	// The shadow register select bits [2:0] are set by reading the sv010
++	// register.
++	pmii_data |= BCM5481_R18H_SV010_LPM;
++	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, pmii_data);
++	if(ret)
++	{
++		DEBUGOUT("Unable to write BCM5481_R18H register\n");
++		printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
++		return ret;
++	}
++
++
++	// Set the RGMII RXD to RXC skew bit in reg 0x18, sv111
++
++	if (bcm5481_read_18sv (hw, BCM5481_R18H_SV_MCTRL, &mctrl_data))
++	{
++		DEBUGOUT("Unable to read BCM5481_R18H_SV_MCTRL register\n");
++		printk (KERN_ERR "Unable to read BCM5481_R18H_SV_MCTRL register\n");
++		return ret;
++	}
++	mctrl_data |= (BCM5481_R18H_WE | BCM5481_R18H_SV111_SKEW);
++
++	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R18H, mctrl_data);
++	if(ret)
++	{
++		DEBUGOUT("Unable to write BCM5481_R18H register\n");
++		printk (KERN_ERR "Unable to write BCM5481_R18H register\n");
++		return ret;
++	}
++
++	// Enable RGMII transmit clock delay in reg 0x1c, sv00011
++	ret = bcm5481_read_1csv (hw, BCM5481_R1CH_CACR, &cacr_data);
++	if (ret)
++	{
++		DEBUGOUT("Unable to read BCM5481_R1CH_CACR register\n");
++		printk (KERN_ERR "Unable to read BCM5481_R1CH_CACR register\n");
++		return ret;
++	}
++
++	cacr_data |= (BCM5481_R1CH_WE | BCM5481_R1CH_CACR_TCD);
++
++	ret = iegbe_oem_write_phy_reg_ex (hw, BCM5481_R1CH, cacr_data);
++	if(ret)
++	{
++		DEBUGOUT("Unable to write BCM5481_R1CH register\n");
++		printk (KERN_ERR "Unable to write BCM5481_R1CH register\n");
++		return ret;
++	}
++
++	// Enable dual link speed indication (0x1c, sv 00010, bit 2)
++	ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_SC1, BCM5481_R1CH_SC1_LINK, BCM5481_R1CH_SC1_LINK);
++	if (ret)
++		return ret;
++
++	// Enable link and activity on ACTIVITY LED (0x1c, sv 01001, bit 4=1, bit 3=0)
++	ret = bcm5481_rmw_1csv (hw, BCM5481_R1CH_LCTRL, BCM5481_R1CH_LCTRL_ALEN, BCM5481_R1CH_LCTRL_ALEN | BCM5481_R1CH_LCTRL_AEN);
++	if (ret)
++		return ret;
++
++	return ret;
++}
+--- a/Embedded/src/GbE/iegbe_oem_phy.h
++++ b/Embedded/src/GbE/iegbe_oem_phy.h
+@@ -95,6 +95,8 @@ int32_t iegbe_oem_phy_is_link_up(struct
+ 
+ #define DEFAULT_ICP_XXXX_TIPG_IPGT 8      /* Inter Packet Gap Transmit Time */
+ #define ICP_XXXX_TIPG_IPGT_MASK 0x000003FFUL 
++#define BCM5481_PHY_ID		0x0143BCA0
++#define BCM5395S_PHY_ID		0x0143BCF0
+ 
+ /* Miscellaneous defines */
+ #ifdef IEGBE_10_100_ONLY
+@@ -103,5 +105,65 @@ int32_t iegbe_oem_phy_is_link_up(struct
+     #define ICP_XXXX_AUTONEG_ADV_DEFAULT	0x2F
+ #endif
+ 
++/* BCM5481 specifics */
++
++#define BCM5481_ECTRL		(0x10)
++#define BCM5481_ESTAT		(0x11)
++#define BCM5481_RXERR		(0x12)
++#define BCM5481_EXPRW		(0x15)
++#define BCM5481_EXPACC		(0x17)
++#define BCM5481_ASTAT		(0x19)
++#define BCM5481_R18H		(0x18)
++#define BCM5481_R1CH		(0x1c)
++
++/* indirect register access via register 18h */
++
++#define BCM5481_R18H_SV_MASK	(7) // Mask for SV bits.
++#define BCM5481_R18H_SV_ACTRL	(0) // SV000 Aux. control
++#define BCM5481_R18H_SV_10BT	(1) // SV001 10Base-T
++#define BCM5481_R18H_SV_PMII	(2) // SV010 Power/MII control
++#define BCM5481_R18H_SV_MTEST	(4) // SV100 Misc. test
++#define BCM5481_R18H_SV_MCTRL	(7) // SV111 Misc. control
++
++#define BCM5481_R18H_SV001_POL	(1 << 13) // Polarity
++#define BCM5481_R18H_SV010_LPM	(1 << 6)
++#define BCM5481_R18H_SV111_SKEW	(1 << 8)
++#define BCM5481_R18H_WE		(1 << 15) // Write enable
++
++// 0x1c registers
++#define BCM5481_R1CH_SV_SHIFT	(10)
++#define BCM5481_R1CH_SV_MASK	(0x1f)
++#define BCM5481_R1CH_SC1	(0x02) // sv00010 Spare control 1
++#define BCM5481_R1CH_CACR	(0x03) // sv00011 Clock alignment control
++#define BCM5481_R1CH_LCTRL	(0x09) // sv01001 LED control
++#define BCM5481_R1CH_LEDS1	(0x0d) // sv01101 LED selector 1
++
++// 0x1c common
++#define BCM5481_R1CH_WE		(1 << 15) // Write enable
++
++// 0x1c, sv 00010
++#define BCM5481_R1CH_SC1_LINK	(1 << 2) // sv00010 Linkspeed
++
++// 0x1c, sv 00011
++#define BCM5481_R1CH_CACR_TCD	(1 << 9) // sv00011 RGMII tx clock delay
++
++// 0x1c, sv 01001
++#define BCM5481_R1CH_LCTRL_ALEN	(1 << 4) // Activity/Link enable on ACTIVITY LED
++#define BCM5481_R1CH_LCTRL_AEN	(1 << 3) // Activity enable on ACTIVITY LED
++
++#define BCM5481_ECTRL_DISMDIX	(1 <<14)
++
++#define BCM5481_MCTRL_AUTOMDIX	(1 <<9)
++
++#define BCM5481_ESTAT_LINK	(1 << 8)
++
++#define BCM5481_ASTAT_ANC	(1 << 15)
++#define BCM5481_ASTAT_ANHCD	(7 << 8)
++#define BCM5481_ASTAT_HCD(x)	((x >> 8) & 7)
++#define BCM5481_ASTAT_1KBTFD	(0x7)
++#define BCM5481_ASTAT_1KBTHD	(0x6)
++#define BCM5481_ASTAT_100BTXFD	(0x5)
++#define BCM5481_ASTAT_100BTXHD	(0x3)
++
+ #endif /* ifndef _IEGBE_OEM_PHY_H_ */
+  

package/kernel/ep80579-drivers/patches/200-can_fix_ioctl_numbers.patch

@@ -0,0 +1,11 @@
+--- a/Embedded/src/CAN/icp_can_user.h
++++ b/Embedded/src/CAN/icp_can_user.h
+@@ -63,6 +63,8 @@
+ #ifndef __ICP_CAN_USER_H__
+ #define __ICP_CAN_USER_H__
+ 
++#include <linux/ioctl.h>
++
+ /*****************************************************************************
+  * Device IO control codes.
+  *****************************************************************************/

package/kernel/ep80579-drivers/patches/210-can_include_linux_fs_h.patch

@@ -0,0 +1,11 @@
+--- a/Embedded/src/CAN/can_main.c
++++ b/Embedded/src/CAN/can_main.c
+@@ -70,6 +70,8 @@
+ 
+ #include "can_main.h"
+ #include "can_ioctl.h"
++#include <linux/fs.h>
++
+ 
+ MODULE_AUTHOR("Intel(R) Corporation");
+ MODULE_DESCRIPTION("Controller Area Network Driver");

package/kernel/ep80579-drivers/patches/220-can_fix_irq_request.patch

@@ -0,0 +1,23 @@
+--- a/Embedded/src/CAN/can_main.c
++++ b/Embedded/src/CAN/can_main.c
+@@ -654,7 +654,7 @@ int can_dev_io(struct inode *inode, stru
+ /*****************************************************************************
+  * Interrupt handler.
+  *****************************************************************************/
+-irqreturn_t can_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
++irqreturn_t can_irq_handler(int irq, void *dev_id)
+ {
+     can_os_t *can_os = (can_os_t *) dev_id;
+     unsigned int int_status;
+--- a/Embedded/src/CAN/can_main.h
++++ b/Embedded/src/CAN/can_main.h
+@@ -165,8 +165,7 @@ int can_dev_io(
+ 
+ irqreturn_t can_irq_handler(
+     int irq, 
+-    void *dev_id, 
+-    struct pt_regs *regs);
++    void *dev_id);
+ 
+ void can_tasklet(
+     unsigned long arg

package/kernel/ep80579-drivers/patches/230-can_remove_driver_data_direct_access.patch

@@ -0,0 +1,40 @@
+--- a/Embedded/src/CAN/can_main.c
++++ b/Embedded/src/CAN/can_main.c
+@@ -214,8 +214,8 @@ int can_pci_probe(struct pci_dev *dev, c
+     spin_lock_init(&(g_can_os[can_num].int_spinlock));
+     spin_lock_init(&(g_can_os[can_num].open_spinlock));
+ 
+-    dev->dev.driver_data = (void *) &(g_can_os[can_num]);
+-    if (!dev->dev.driver_data)
++    dev_set_drvdata(&dev->dev, (void *) &(g_can_os[can_num]));
++    if (!dev_get_drvdata(&dev->dev))
+     {
+         printk("Couldn't create CAN device %d. Exiting.\n",
+             dev->device);
+@@ -237,7 +237,7 @@ int can_pci_probe(struct pci_dev *dev, c
+  *****************************************************************************/
+ void can_pci_remove(struct pci_dev *dev)
+ {
+-    can_os_t *can_os = dev->dev.driver_data;
++    can_os_t *can_os = dev_get_drvdata(&dev->dev);
+ 
+     iounmap(can_os->pci_remap);
+     icp_can_destroy(can_os->can);
+@@ -251,7 +251,7 @@ int can_pci_suspend(struct pci_dev *dev,
+ {
+     unsigned int i;
+     unsigned int int_status;
+-    can_os_t *can_os = dev->dev.driver_data;
++    can_os_t *can_os = dev_get_drvdata(&dev->dev);
+     int err;
+ 
+ 	/* Indicate that we are suspending */
+@@ -322,7 +322,7 @@ int can_pci_suspend(struct pci_dev *dev,
+ int can_pci_resume(struct pci_dev *dev)
+ {
+     unsigned int i;
+-    can_os_t *can_os = dev->dev.driver_data;
++    can_os_t *can_os = dev_get_drvdata(&dev->dev);
+ 
+ 	/* Restore PCI CFG space */
+ 	pci_restore_state(dev);

package/kernel/ep80579-drivers/patches/300-wdt_compile_fix.patch

@@ -0,0 +1,59 @@
+--- a/Embedded/src/WDT/iwdt.c
++++ b/Embedded/src/WDT/iwdt.c
+@@ -180,19 +180,19 @@ MODULE_PARM_DESC(wdt_scale, "Intel WDT s
+ module_param(wdt_intr_type, byte, WDT_INT_TYPE_IRQ);
+ MODULE_PARM_DESC(wdt_intr_type, "Intel WDT interrupt type (default SERIRQ).");
+ 
+-module_param(wdt_margin1, uint, TIMER_MARGIN);
++module_param(wdt_margin1, uint, 0);
+ MODULE_PARM_DESC(wdt_margin1, "First stage Intel WDT timeout in steps of 1 ms by default.");
+ 
+-module_param(wdt_margin2, uint, TIMER_MARGIN);
++module_param(wdt_margin2, uint, 0);
+ MODULE_PARM_DESC(wdt_margin2, "Second stage Intel WDT timeout in steps of 1 ms by default.");
+ 
+ module_param(nowayout, int, 0);
+ MODULE_PARM_DESC(nowayout, "Intel WDT can't be stopped once started (default=0)");
+ 
+-module_param(wdt_index_port, int, 0x4E);
++module_param(wdt_index_port, int, 0);
+ MODULE_PARM_DESC(wdt_index_port, "WDT Index Port (default 0x4e)");
+ 
+-module_param(wdt_data_port, int, 0x4E);
++module_param(wdt_data_port, int, 0);
+ MODULE_PARM_DESC(wdt_data_port, "WDT Data Port (default 0x4f)");
+ 
+ static int wdt_get_iobase(struct pci_dev *dev, u16 *iobase, int *irq);
+@@ -218,7 +218,7 @@ static ssize_t wdt_write(struct file *fi
+                      size_t count, loff_t * pos);
+ static int wdt_ioctl(struct inode *inode, struct file *file,
+                     unsigned int cmd, unsigned long arg);
+-static irqreturn_t wdt_isr(int irq, void *dev_id, struct pt_regs *regs);
++static irqreturn_t wdt_isr(int irq, void *dev_id);
+ static void __exit wdt_cleanup(void);
+ static int __init wdt_init(void);
+ static int __init wdt_init_one(struct pci_dev *dev,
+@@ -255,7 +255,7 @@ static struct pci_driver wdt_driver = {
+      name:        "iwdt",
+      id_table:     lpc_pci_tbl,
+      probe:        wdt_init_one,
+-     remove:        __devexit(wdt_remove_one),
++     remove:        __devexit_p(wdt_remove_one),
+      suspend:      wdt_pci_suspend,
+      resume:       wdt_pci_resume,
+ };
+@@ -1393,12 +1393,12 @@ static int wdt_ioctl(struct inode *inode
+ 
+ /*
+  * Function Name:   wdt_isr()
+- * Parameter:    int irq - irq number, void *dev_id, struct pt_regs *regs
++ * Parameter:    int irq - irq number, void *dev_id
+  * Return Value::   IRQ_NONE -  if the interrupt is not for wdt.
+  *           IRQ_HANDLED - if it is for wdt.
+  * Description:     This is the interrupt service routine of the WDT.
+  */
+-static irqreturn_t wdt_isr(int irq, void *dev_id, struct pt_regs *regs)
++static irqreturn_t wdt_isr(int irq, void *dev_id)
+ {
+      u8 val;
+ 

package/kernel/ep80579-drivers/patches/400-edma_fix_irq_request_warning.patch

@@ -0,0 +1,22 @@
+--- a/Embedded/src/EDMA/dma_linux.c
++++ b/Embedded/src/EDMA/dma_linux.c
+@@ -149,8 +149,7 @@ int32_t edma_suspend (struct pci_dev *de
+ int32_t edma_resume(struct pci_dev *dev);
+ int32_t initialize_edma_device(struct edma_device *device);
+ 
+-static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id,
+-                                    struct pt_regs * regs);
++static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id);
+ 
+ /* Prototypes - Misc. */
+ 
+@@ -429,8 +428,7 @@ int32_t edma_release(struct inode * inod
+  * Return Values: HANDLED = 1, NOT_HANDLED = 0
+  *****************************************************************************/
+ 
+-static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id,
+-                                    struct pt_regs * regs)
++static irqreturn_t edma_irq_handler(int32_t irq, void * dev_id)
+ {
+ 
+     uint32_t clear_bits;

package/kernel/ep80579-drivers/patches/500-1588_fix_irq_request_warning.patch

@@ -0,0 +1,22 @@
+--- a/Embedded/src/1588/1588.c
++++ b/Embedded/src/1588/1588.c
+@@ -631,7 +631,7 @@ int restore_interrupts(void)
+       IRQ_NONE => this device did not interrupt
+ 
+ ******************************************************************************/
+-irqreturn_t timesync_isr(int irq, void *dev_id, struct pt_regs *regs)
++irqreturn_t timesync_isr(int irq, void *dev_id)
+ {
+     if ( !ixTimeSyncAccEventAmmsFlagGet() && !ixTimeSyncAccEventAsmsFlagGet()&&
+        !ixTimeSyncAccEventAtmFlagGet() && !ixTimeSyncAccEventPpsmFlagGet()&&
+--- a/Embedded/src/1588/1588.h
++++ b/Embedded/src/1588/1588.h
+@@ -128,7 +128,7 @@ int pci_suspend(struct pci_dev *dev, pm_
+ int pci_resume(struct pci_dev *dev);
+ int pci_probe(struct pci_dev *dev, const struct pci_device_id *id);
+ void pci_remove(struct pci_dev *dev);
+-irqreturn_t timesync_isr(int irq, void *dev_id, struct pt_regs *regs);
++irqreturn_t timesync_isr(int irq, void *dev_id);
+ 
+ // private functions
+ int save_reg_state(void);

package/kernel/ep80579-drivers/patches/600-2.6.27_includes.patch

@@ -0,0 +1,22 @@
+--- a/Embedded/src/CAN/can_main.h
++++ b/Embedded/src/CAN/can_main.h
+@@ -65,7 +65,7 @@
+ 
+ #include <linux/interrupt.h>
+ #include <linux/pci.h>
+-#include <asm/semaphore.h>
++#include <linux/semaphore.h>
+ #include <linux/spinlock.h>
+ #include <linux/cdev.h>
+ #include <asm/uaccess.h>
+--- a/Embedded/src/EDMA/dma_linux.c
++++ b/Embedded/src/EDMA/dma_linux.c
+@@ -87,7 +87,7 @@
+ #include <linux/fcntl.h>   /* O_ACCMODE */
+ #include <asm/system.h>    /* cli, *_flags */
+ #include <asm/uaccess.h>   /* copy_to_user */
+-#include <asm/semaphore.h>
++#include <linux/semaphore.h>
+ #include <asm/io.h>        /* inb(), outb() */
+ #include <linux/kmod.h>
+ #include <linux/ioport.h>  /* request_region */

package/kernel/ep80579-drivers/patches/601-2.6.32_includes.patch

@@ -0,0 +1,30 @@
+--- a/Embedded/src/1588/1588.c
++++ b/Embedded/src/1588/1588.c
+@@ -72,6 +72,7 @@
+  *
+  ****************************************************************************/
+ 
++#include <linux/sched.h>
+ #include "1588.h"
+ 
+ MODULE_AUTHOR("Intel(R) Corporation");
+--- a/Embedded/src/CAN/can_main.c
++++ b/Embedded/src/CAN/can_main.c
+@@ -68,6 +68,7 @@
+  *
+  **************************************************************************/
+ 
++#include <linux/sched.h>
+ #include "can_main.h"
+ #include "can_ioctl.h"
+ #include <linux/fs.h>
+--- a/Embedded/src/WDT/iwdt.c
++++ b/Embedded/src/WDT/iwdt.c
+@@ -137,6 +137,7 @@
+ #include <linux/watchdog.h>
+ #include <linux/miscdevice.h>
+ #include <linux/interrupt.h>
++#include <linux/sched.h>
+ #include "iwdt.h"
+ 
+ MODULE_AUTHOR("Intel(R) Corporation");

package/kernel/ep80579-drivers/patches/700-iegbe_kcompat_2.6.30.patch

@@ -0,0 +1,31 @@
+--- a/Embedded/src/GbE/kcompat.h
++++ b/Embedded/src/GbE/kcompat.h
+@@ -46,12 +46,6 @@ GPL LICENSE SUMMARY
+ #include <linux/sched.h>
+ #include <asm/io.h>
+ 
+-#ifndef IRQ_HANDLED
+-#define irqreturn_t void
+-#define IRQ_HANDLED
+-#define IRQ_NONE
+-#endif
+-
+ #ifndef SET_NETDEV_DEV
+ #define SET_NETDEV_DEV(net, pdev)
+ #endif
+@@ -748,6 +742,15 @@ extern void dump_stack(void);
+ 
+ #endif /* 2.4.24 */
+ 
++/*****************************************************************************/
++#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) )
++#ifndef IRQ_HANDLED
++#define irqreturn_t void
++#define IRQ_HANDLED
++#define IRQ_NONE
++#endif
++#endif /* < 2.6.30 */
++
+ #endif /* _KCOMPAT_H_ */
+ 
+  

package/kernel/ep80579-drivers/patches/701-iegbe_poll_dev.patch

@@ -0,0 +1,11 @@
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -3534,7 +3534,7 @@ static int iegbe_clean(struct napi_struc
+ 	int tx_cleaned = 0, work_done = 0;
+ 
+ 	/* Must NOT use netdev_priv macro here. */
+-	adapter = poll_dev->priv;
++	adapter = netdev_priv(poll_dev);
+ 
+ 	/* iegbe_clean is called per-cpu.  This lock protects
+ 	 * tx_ring[0] from being cleaned by multiple cpus

package/kernel/ep80579-drivers/patches/710-3.3-fix-generated-header-locations.patch

@@ -0,0 +1,91 @@
+--- a/Embedded/src/GbE/Makefile
++++ b/Embedded/src/GbE/Makefile
+@@ -60,19 +60,19 @@ GBE_NAME = iegbe
+ GCU_NAME = gcu
+ 
+ VERSION_FILE := $(KSRC)/include/linux/version.h
+-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
+-CONFIG_FILE  := $(KSRC)/include/linux/autoconf.h
++UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
++CONFIG_FILE  := $(KSRC)/include/generated/autoconf.h
+ 
+ ifeq (,$(wildcard $(VERSION_FILE)))
+   $(error Linux kernel source not configured - missing version.h)
+ endif
+ 
+ ifeq (,$(wildcard $(CONFIG_FILE)))
+-  $(error Linux kernel source not configured - missing autoconf.h)
++    $(error Linux kernel source not configured - missing autoconf.h)
+ endif
+ 
+ ifeq (,$(wildcard $(UTS_REL_FILE)))
+-  $(error Linux kernel source not configured - missing utsrelease.h)
++    $(error Linux kernel source not configured - missing utsrelease.h)
+ endif
+ 
+ # set the install path
+--- a/Embedded/src/1588/Makefile
++++ b/Embedded/src/1588/Makefile
+@@ -97,8 +97,8 @@ OUTPUT_PATH ?= /
+ EXTRA_LDFLAGS += -whole-archive
+ 
+ VERSION_FILE := $(KOBJ)/include/linux/version.h
+-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
+-CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
++UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
++CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
+ 
+  
+ # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
+--- a/Embedded/src/CAN/Makefile
++++ b/Embedded/src/CAN/Makefile
+@@ -100,8 +100,8 @@ OUTPUT_PATH ?= /
+ EXTRA_LDFLAGS += -whole-archive
+ 
+ VERSION_FILE := $(KOBJ)/include/linux/version.h
+-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
+-CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
++UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
++CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
+ 
+  
+ # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
+--- a/Embedded/src/EDMA/Makefile
++++ b/Embedded/src/EDMA/Makefile
+@@ -114,8 +114,8 @@ OUTPUT_PATH ?= /
+ EXTRA_LDFLAGS += -whole-archive
+ 
+ VERSION_FILE := $(KOBJ)/include/linux/version.h
+-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
+-CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
++UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
++CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
+ 
+  
+ # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
+--- a/Embedded/src/GPIO/Makefile
++++ b/Embedded/src/GPIO/Makefile
+@@ -97,8 +97,8 @@ OUTPUT_PATH ?= /
+ EXTRA_LDFLAGS += -whole-archive
+ 
+ VERSION_FILE := $(KOBJ)/include/linux/version.h
+-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
+-CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
++UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
++CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
+ 
+  
+ # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h
+--- a/Embedded/src/WDT/Makefile
++++ b/Embedded/src/WDT/Makefile
+@@ -99,8 +99,8 @@ OUTPUT_PATH ?= /
+ EXTRA_LDFLAGS += -whole-archive
+ 
+ VERSION_FILE := $(KOBJ)/include/linux/version.h
+-UTS_REL_FILE := $(KSRC)/include/linux/utsrelease.h
+-CONFIG_FILE  := $(KOBJ)/include/linux/autoconf.h
++UTS_REL_FILE := $(KSRC)/include/generated/utsrelease.h
++CONFIG_FILE  := $(KOBJ)/include/generated/autoconf.h
+ 
+  
+ # as of 2.6.16, kernel define UTS_RELEASE has been moved to utsrelease.h

package/kernel/ep80579-drivers/patches/711-3.3-gbe-fixes.patch

@@ -0,0 +1,392 @@
+--- a/Embedded/src/GbE/kcompat.h
++++ b/Embedded/src/GbE/kcompat.h
+@@ -590,6 +590,10 @@ static inline void _kc_synchronize_irq()
+ #define ETHTOOL_OPS_COMPAT
+ #endif
+ 
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0))
++#define HAVE_NETIF_MSG 1
++#endif
++
+ #ifndef HAVE_NETIF_MSG
+ #define HAVE_NETIF_MSG 1
+ enum {
+--- a/Embedded/src/GbE/iegbe_main.c
++++ b/Embedded/src/GbE/iegbe_main.c
+@@ -159,9 +159,9 @@ static void iegbe_smartspeed(struct iegb
+ static inline int iegbe_82547_fifo_workaround(struct iegbe_adapter *adapter,
+                           struct sk_buff *skb);
+ 
+-static void iegbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
+-static void iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
+-static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
++static bool iegbe_vlan_used(struct iegbe_adapter *adapter);
++static int iegbe_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
++static int iegbe_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+ static void iegbe_restore_vlan(struct iegbe_adapter *adapter);
+ 
+ static int iegbe_notify_reboot(struct notifier_block *,
+@@ -324,8 +324,8 @@ static void iegbe_update_mng_vlan(struct
+         struct net_device *netdev = adapter->netdev;
+ 	u16 vid = hw->mng_cookie.vlan_id;
+         u16 old_vid = adapter->mng_vlan_id;
+-        if (adapter->vlgrp) {
+-                if (!vlan_group_get_device(adapter->vlgrp, vid)) {
++        if (iegbe_vlan_used(adapter)) {
++                if (!test_bit(old_vid, adapter->active_vlans)) {
+ 			if (hw->mng_cookie.status &
+                                 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
+                                 iegbe_vlan_rx_add_vid(netdev, vid);
+@@ -335,7 +335,7 @@ static void iegbe_update_mng_vlan(struct
+ 
+                         if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
+                                         (vid != old_vid) &&
+-                            !vlan_group_get_device(adapter->vlgrp, old_vid))
++                            !test_bit(old_vid, adapter->active_vlans))
+                                 iegbe_vlan_rx_kill_vid(netdev, old_vid);
+                 } else
+                         adapter->mng_vlan_id = vid;
+@@ -736,7 +736,6 @@ static const struct net_device_ops iegbe
+ 	.ndo_do_ioctl		= iegbe_ioctl,
+ 	.ndo_validate_addr	= eth_validate_addr,
+ 
+-	.ndo_vlan_rx_register	= iegbe_vlan_rx_register,
+ 	.ndo_vlan_rx_add_vid	= iegbe_vlan_rx_add_vid,
+ 	.ndo_vlan_rx_kill_vid	= iegbe_vlan_rx_kill_vid,
+ #ifdef CONFIG_NET_POLL_CONTROLLER
+@@ -767,7 +766,6 @@ static int __devinit iegbe_probe(struct
+ 	u16 eeprom_data = 0;
+ 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ 	int bars; 
+-	DECLARE_MAC_BUF(mac);
+ 
+ 	bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ 	err = pci_enable_device(pdev);
+@@ -1247,8 +1245,7 @@ static int iegbe_close(struct net_device
+ 
+ 	if ((hw->mng_cookie.status &
+ 			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+-	     !(adapter->vlgrp &&
+-	       vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) {
++	     !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) {
+ 		iegbe_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ 	}
+ 	return 0;
+@@ -2163,11 +2160,13 @@ static void iegbe_set_rx_mode(struct net
+ 	struct iegbe_hw *hw = &adapter->hw;
+ 	struct netdev_hw_addr *ha;
+ 	bool use_uc = false;
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
+ 	struct dev_addr_list *mc_ptr;
+-	u32 rctl;
+ 	u32 hash_value;
+-	int i, rar_entries = E1000_RAR_ENTRIES;
+ int mta_reg_count = E1000_NUM_MTA_REGISTERS;
++#endif
++	u32 rctl;
++	int i, rar_entries = E1000_RAR_ENTRIES;
+ 
+ 	/* reserve RAR[14] for LAA over-write work-around */
+ 	if (hw->mac_type == iegbe_82571)
+@@ -2220,6 +2219,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ 
+ 	WARN_ON(i == rar_entries);
+ 
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
+ 	mc_ptr = netdev->mc_list;
+ 
+ 	for (; i < rar_entries; i++) {
+@@ -2247,6 +2247,7 @@ int mta_reg_count = E1000_NUM_MTA_REGIST
+ 		hash_value = iegbe_hash_mc_addr(hw, mc_ptr->da_addr);
+ 		iegbe_mta_set(hw, hash_value);
+ 	}
++#endif
+ 
+ 	if (hw->mac_type == iegbe_82542_rev2_0)
+ 		iegbe_leave_82542_rst(adapter);
+@@ -2821,14 +2822,14 @@ static int iegbe_tx_map(struct iegbe_ada
+              * Avoid terminating buffers within evenly-aligned
+              * dwords. */
+             if(unlikely(adapter->pcix_82544 &&
+-			   !((unsigned long)(frag->page+offset+size-1) & 4) &&
++			   !((unsigned long)(frag->page.p+offset+size-1) & 4) &&
+ 			   size > 4))
+ 				size -= 4;
+ 
+             buffer_info->length = size;
+             buffer_info->dma =
+                 pci_map_page(adapter->pdev,
+-                    frag->page,
++                    frag->page.p,
+                     offset,
+                     size,
+                     PCI_DMA_TODEVICE);
+@@ -3131,7 +3132,7 @@ static int iegbe_xmit_frame(struct sk_bu
+ 		}
+ 	}
+ 
+-	if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
++	if (unlikely(iegbe_vlan_used(adapter) && vlan_tx_tag_present(skb))) {
+ 		tx_flags |= E1000_TX_FLAGS_VLAN;
+ 		tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
+ 	}
+@@ -3832,10 +3833,12 @@ static bool iegbe_clean_rx_irq(struct ie
+ 
+ 		skb->protocol = eth_type_trans(skb, netdev);
+ 
+-		if (unlikely(adapter->vlgrp &&
++		if (unlikely(iegbe_vlan_used(adapter) &&
+ 			    (status & E1000_RXD_STAT_VP))) {
+-			vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+-						 le16_to_cpu(rx_desc->special));
++			u16 vid;
++
++			vid = le16_to_cpu(rx_desc->special);
++			__vlan_hwaccel_put_tag(skb, vid);
+ 		} else {
+ 			netif_receive_skb(skb);
+ 		}
+@@ -3986,9 +3989,10 @@ copydone:
+ 			   cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
+             adapter->rx_hdr_split++;
+ 
+-        if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
+-            vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+-				le16_to_cpu(rx_desc->wb.middle.vlan));
++        if(unlikely(iegbe_vlan_used(adapter) && (staterr & E1000_RXD_STAT_VP))) {
++	    u16 vid;
++	    vid = le16_to_cpu(rx_desc->wb.middle.vlan);
++	    __vlan_hwaccel_put_tag(skb, vid);
+         } else {
+             netif_receive_skb(skb);
+         }
+@@ -4496,17 +4500,25 @@ iegbe_io_write(struct iegbe_hw *hw, unsi
+     outl(value, port);
+ }
+ 
+-static void iegbe_vlan_rx_register(struct net_device *netdev,
+-				   struct vlan_group *grp)
++static bool iegbe_vlan_used(struct iegbe_adapter *adapter)
++{
++	u16 vid;
++
++	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
++		return true;
++
++	return false;
++}
++
++static void iegbe_vlan_mode(struct net_device *netdev, bool vlan_on)
+ {
+     struct iegbe_adapter *adapter = netdev_priv(netdev);
+     uint32_t ctrl, rctl;
+ 
+ 	if (!test_bit(__E1000_DOWN, &adapter->flags))
+     iegbe_irq_disable(adapter);
+-    adapter->vlgrp = grp;
+ 
+-    if(grp) {
++    if(vlan_on) {
+         /* enable VLAN tag insert/strip */
+         ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+         ctrl |= E1000_CTRL_VME;
+@@ -4538,30 +4550,37 @@ static void iegbe_vlan_rx_register(struc
+     iegbe_irq_enable(adapter);
+ }
+ 
+-static void iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
++static int iegbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+ {
+     struct iegbe_adapter *adapter = netdev_priv(netdev);
+     uint32_t vfta, index;
+     if((adapter->hw.mng_cookie.status &
+         E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+         (vid == adapter->mng_vlan_id)) {
+-        return;
++        return 0;
+     }
++
++    if (!iegbe_vlan_used(adapter))
++	iegbe_vlan_mode(netdev, true);
++
+     /* add VID to filter table */
+     index = (vid >> 0x5) & 0x7F;
+     vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+     vfta |= (0x1 << (vid & 0x1F));
+     iegbe_write_vfta(&adapter->hw, index, vfta);
++
++    set_bit(vid, adapter->active_vlans);
++
++    return 0;
+ }
+ 
+-static void iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
++static int iegbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+ {
+ 	struct iegbe_adapter *adapter = netdev_priv(netdev);
+ 	u32 vfta, index;
+ 
+ 	if (!test_bit(__E1000_DOWN, &adapter->flags))
+ 	iegbe_irq_disable(adapter);
+-	vlan_group_set_device(adapter->vlgrp, vid, NULL);
+ 	if (!test_bit(__E1000_DOWN, &adapter->flags))
+ 	iegbe_irq_enable(adapter);
+ 
+@@ -4570,21 +4589,26 @@ static void iegbe_vlan_rx_kill_vid(struc
+ 	vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+ 	vfta &= ~(0x1 << (vid & 0x1F));
+ 	iegbe_write_vfta(&adapter->hw, index, vfta);
++
++	clear_bit(vid, adapter->active_vlans);
++
++	if (!iegbe_vlan_used(adapter))
++		iegbe_vlan_mode(netdev, false);
++
++	return 0;
+ }
+ 
+ static void iegbe_restore_vlan(struct iegbe_adapter *adapter)
+ {
+-	iegbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+-
+-	if (adapter->vlgrp) {
+ 		u16 vid;
+-		for (vid = 0x0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+-			if (!vlan_group_get_device(adapter->vlgrp, vid))
+-				continue;
++
++	if (!iegbe_vlan_used(adapter))
++		return;
++
++	iegbe_vlan_mode(adapter->netdev, true);
++	for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ 			iegbe_vlan_rx_add_vid(adapter->netdev, vid);
+ 		}
+-	}
+-}
+ 
+ 
+ int iegbe_set_spd_dplx(struct iegbe_adapter *adapter, u16 spddplx)
+@@ -4864,10 +4888,11 @@ iegbe_resume(struct pci_dev *pdev)
+     default:
+         break;
+     }
+-#endif
+ 
+     return 0x0;
+ }
++#endif
++
+ 
+ #ifdef CONFIG_NET_POLL_CONTROLLER
+ /*
+--- a/Embedded/src/GbE/iegbe_ethtool.c
++++ b/Embedded/src/GbE/iegbe_ethtool.c
+@@ -327,6 +327,7 @@ iegbe_set_pauseparam(struct net_device *
+     return 0;
+ }
+ 
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
+ static uint32_t
+ iegbe_get_rx_csum(struct net_device *netdev)
+ {
+@@ -392,6 +393,7 @@ iegbe_set_tso(struct net_device *netdev,
+     return 0;
+ } 
+ #endif /* NETIF_F_TSO */
++#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) */
+ 
+ static uint32_t
+ iegbe_get_msglevel(struct net_device *netdev)
+@@ -807,6 +809,7 @@ err_setup_rx:
+             E1000_82542_##R : E1000_##R;                           \
+         return 1;         }  }
+ 
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
+ static int
+ iegbe_reg_test(struct iegbe_adapter *adapter, uint64_t *data)
+ {
+@@ -1710,6 +1713,7 @@ iegbe_diag_test(struct net_device *netde
+     }
+     msleep_interruptible(0xfa0);
+ }
++#endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)) */
+ 
+ static void
+ iegbe_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+@@ -1812,6 +1816,7 @@ iegbe_set_wol(struct net_device *netdev,
+ /* bit defines for adapter->led_status */
+ #define E1000_LED_ON        0
+ 
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
+ static void
+ iegbe_led_blink_callback(unsigned long data)
+ {
+@@ -1864,6 +1869,7 @@ iegbe_phys_id(struct net_device *netdev,
+ 
+     return 0;
+ }
++#endif
+ 
+ static int
+ iegbe_nway_reset(struct net_device *netdev)
+@@ -1876,11 +1882,13 @@ iegbe_nway_reset(struct net_device *netd
+     return 0;
+ }
+ 
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
+ static int 
+ iegbe_get_stats_count(struct net_device *netdev)
+ {
+     return E1000_STATS_LEN;
+ }
++#endif
+ 
+ static void 
+ iegbe_get_ethtool_stats(struct net_device *netdev, 
+@@ -1936,6 +1944,8 @@ struct ethtool_ops iegbe_ethtool_ops = {
+     .set_ringparam          = iegbe_set_ringparam,
+     .get_pauseparam        = iegbe_get_pauseparam,
+     .set_pauseparam        = iegbe_set_pauseparam,
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0))
+     .get_rx_csum        = iegbe_get_rx_csum,
+     .set_rx_csum        = iegbe_set_rx_csum,
+     .get_tx_csum            = iegbe_get_tx_csum,
+@@ -1946,11 +1956,13 @@ struct ethtool_ops iegbe_ethtool_ops = {
+     .get_tso        = ethtool_op_get_tso,
+     .set_tso        = iegbe_set_tso,
+ #endif
++
+     .self_test_count        = iegbe_diag_test_count,
+     .self_test              = iegbe_diag_test,
+-    .get_strings            = iegbe_get_strings,
+     .phys_id                = iegbe_phys_id,
+     .get_stats_count        = iegbe_get_stats_count,
++#endif
++    .get_strings            = iegbe_get_strings,
+     .get_ethtool_stats      = iegbe_get_ethtool_stats,
+ };
+ 
+--- a/Embedded/src/GbE/gcu_main.c
++++ b/Embedded/src/GbE/gcu_main.c
+@@ -93,7 +93,7 @@ static struct pci_driver gcu_driver = {
+ };
+ 
+ static struct gcu_adapter *global_adapter = 0;
+-static spinlock_t global_adapter_spinlock = SPIN_LOCK_UNLOCKED;
++static DEFINE_SPINLOCK(global_adapter_spinlock);
+ static unsigned long g_intflags = 0;
+ 
+ MODULE_AUTHOR("Intel(R) Corporation");
+--- a/Embedded/src/GbE/iegbe.h
++++ b/Embedded/src/GbE/iegbe.h
+@@ -257,7 +257,7 @@ struct iegbe_adapter {
+ 	struct timer_list tx_fifo_stall_timer;
+ 	struct timer_list watchdog_timer;
+ 	struct timer_list phy_info_timer;
+-	struct vlan_group *vlgrp;
++	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+     	uint16_t mng_vlan_id;
+ 	uint32_t bd_number;
+ 	uint32_t rx_buffer_len;

package/kernel/ep80579-drivers/patches/712-3.3-can-fixes.patch

@@ -0,0 +1,41 @@
+--- a/Embedded/src/CAN/can_main.c
++++ b/Embedded/src/CAN/can_main.c
+@@ -72,6 +72,7 @@
+ #include "can_main.h"
+ #include "can_ioctl.h"
+ #include <linux/fs.h>
++#include <linux/module.h>
+ 
+ 
+ MODULE_AUTHOR("Intel(R) Corporation");
+@@ -110,7 +111,7 @@ struct file_operations file_ops = {
+     .owner        = THIS_MODULE,
+     .read        = can_read,
+     .write        = can_write,
+-    .ioctl        = can_dev_io,
++    .unlocked_ioctl = can_dev_io,
+     .open        = can_open,
+     .release     = can_release
+ };
+@@ -594,8 +595,7 @@ int icp_can_reset(can_os_t *can_os)
+ /*****************************************************************************
+  * Device IO control function. Used by user apps to configure CAN device.
+  *****************************************************************************/
+-int can_dev_io(struct inode *inode, struct file *filp, unsigned int cmd,
+-      unsigned long arg)
++long can_dev_io(struct file *filp, unsigned int cmd, unsigned long arg)
+ {
+     can_os_t *can_os;
+     unsigned int err=0;
+--- a/Embedded/src/CAN/can_main.h
++++ b/Embedded/src/CAN/can_main.h
+@@ -157,8 +157,7 @@ ssize_t can_write(
+ int icp_can_reset(
+     can_os_t *can_os);
+     
+-int can_dev_io(
+-    struct inode *inode, 
++long can_dev_io(
+     struct file *filp, 
+     unsigned int cmd, 
+     unsigned long arg);

package/kernel/ep80579-drivers/patches/713-3.3-gpio-fixes.patch

@@ -0,0 +1,33 @@
+--- a/Embedded/src/GPIO/gpio.h
++++ b/Embedded/src/GPIO/gpio.h
+@@ -121,8 +121,7 @@ int gpio_init(void);
+ void gpio_close(void);
+ int gpio_open(struct inode *inode, struct file *filp);
+ int gpio_release(struct inode *inode, struct file *filp);
+-int gpio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, 
+-			   unsigned long arg);
++long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
+ 
+ // private driver functions
+ int gpio_getpininfo(int Signal, char *pBuff);
+@@ -134,7 +133,7 @@ struct file_operations file_ops =
+ 	.owner	=	THIS_MODULE,
+ 	.open   =    gpio_open,
+ 	.release =   gpio_release,	
+-	.ioctl	=	gpio_ioctl,
++	.unlocked_ioctl	= gpio_ioctl,
+ };
+ 
+ #endif
+--- a/Embedded/src/GPIO/gpio_ref.c
++++ b/Embedded/src/GPIO/gpio_ref.c
+@@ -251,8 +251,7 @@ int gpio_release(struct inode *inode, st
+       0 => success
+     < 0 => error
+ ******************************************************************************/
+-int gpio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+-                unsigned long arg)
++long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+ {
+     gpio_ioctl_t Info;
+     u_int bitstr = 0;

package/kernel/ep80579-drivers/patches/714-3.3-wdt-fixes.patch

@@ -0,0 +1,31 @@
+--- a/Embedded/src/WDT/iwdt.c
++++ b/Embedded/src/WDT/iwdt.c
+@@ -217,8 +217,7 @@ static int wdt_open(struct inode *inode,
+ static int wdt_release(struct inode *inode, struct file *file);
+ static ssize_t wdt_write(struct file *file, const char *data,
+                      size_t count, loff_t * pos);
+-static int wdt_ioctl(struct inode *inode, struct file *file,
+-                    unsigned int cmd, unsigned long arg);
++static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+ static irqreturn_t wdt_isr(int irq, void *dev_id);
+ static void __exit wdt_cleanup(void);
+ static int __init wdt_init(void);
+@@ -243,7 +242,7 @@ static struct pci_device_id lpc_pci_tbl[
+ static struct file_operations wdt_fops = {
+      owner:        THIS_MODULE,
+      write:        wdt_write,
+-     ioctl:        wdt_ioctl,
++     unlocked_ioctl: wdt_ioctl,
+      open:         wdt_open,
+      release:      wdt_release,
+ };
+@@ -1201,8 +1200,7 @@ char *wdt_get_ioctl_string(unsigned int
+  * Return Value:    0 - successful, negative value - failed.
+  * Description:     This function is used to provide IO interface.
+  */
+-static int wdt_ioctl(struct inode *inode, struct file *file,
+-                    unsigned int cmd, unsigned long arg)
++static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+ {
+      u8  mode=0, scale=0, int_type=0;
+      u32 u_margin=0, dcount=0;

package/kernel/ep80579-drivers/patches/715-3.3-1588-fixes.patch

@@ -0,0 +1,33 @@
+--- a/Embedded/src/1588/1588.c
++++ b/Embedded/src/1588/1588.c
+@@ -664,8 +664,7 @@ irqreturn_t timesync_isr(int irq, void *
+       0 => success
+     < 0 => error
+ ******************************************************************************/
+-int timesync_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+-                unsigned long arg)
++long timesync_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+ {
+     wait_queue_head_t *event = NULL;
+     unsigned int bytes_ret = 0;
+--- a/Embedded/src/1588/1588.h
++++ b/Embedded/src/1588/1588.h
+@@ -121,8 +121,7 @@ MODULE_DEVICE_TABLE(pci, pci_ids);
+ // Linux functions
+ int timesync_open(struct inode *inode, struct file *filp);
+ int timesync_release(struct inode *inode, struct file *filp);
+-int timesync_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+-				unsigned long arg);
++long timesync_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
+ void timesync_close(void);
+ int pci_suspend(struct pci_dev *dev, pm_message_t state);
+ int pci_resume(struct pci_dev *dev);
+@@ -142,7 +141,7 @@ struct file_operations file_ops =
+ 	.owner		= THIS_MODULE,
+ 	.open     = timesync_open,
+ 	.release    = timesync_release,	
+-	.ioctl		= timesync_ioctl,
++	.unlocked_ioctl = timesync_ioctl,
+ };
+ 
+ // Linux pci operations

package/kernel/gpio-nct5104d/Makefile

@@ -1,52 +0,0 @@
-#
-# Copyright (C) 2017 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=gpio-nct5104d
-PKG_RELEASE:=1
-
-PKG_MAINTAINER:=Florian Eckert <Eckert.Florian@googlemail.com>
-PKG_LICENSE:=GPL-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/gpio-nct5104d
-  SUBMENU:=Other modules
-  TITLE:= GPIO nct5104d support
-  DEPENDS:= @GPIO_SUPPORT @TARGET_x86
-  FILES:=$(PKG_BUILD_DIR)/gpio-nct5104d.ko
-  AUTOLOAD:=$(call AutoLoad,30,gpio-nct5104d,1)
-  KCONFIG:=
-endef
-
-define KernelPackage/gpio-nct5104d/description
-  Support for GPIO functionality of NCT5104D super I/O chip.
-endef
-
-EXTRA_KCONFIG:= \
-	CONFIG_GPIO_NCT5104D=m
-
-EXTRA_CFLAGS:= \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(EXTRA_KCONFIG)))) \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(EXTRA_KCONFIG)))) \
-
-MAKE_OPTS:= \
-	ARCH="$(LINUX_KARCH)" \
-	CROSS_COMPILE="$(TARGET_CROSS)" \
-	SUBDIRS="$(PKG_BUILD_DIR)" \
-	EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
-	$(EXTRA_KCONFIG)
-
-define Build/Compile
-	 $(MAKE) -C "$(LINUX_DIR)" \
-		$(MAKE_OPTS) \
-		modules
-endef
-
-$(eval $(call KernelPackage,gpio-nct5104d))

package/kernel/gpio-nct5104d/src/Kconfig

@@ -1,5 +0,0 @@
-config GPIO_NCT5104D
-        tristate "NCT5104D GPIO support"
-        depends on GENERIC_GPIO
-        help
-          Say yes here to support GPIO functionality of NCT5104D super I/O chip

package/kernel/gpio-nct5104d/src/Makefile

@@ -1 +0,0 @@
-obj-${CONFIG_GPIO_NCT5104D}    += gpio-nct5104d.o

package/kernel/gpio-nct5104d/src/gpio-nct5104d.c

@@ -1,461 +0,0 @@
-/*
- * GPIO driver for NCT5104D
- *
- * Author: Tasanakorn Phaipool <tasanakorn@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/version.h>
-#include <linux/dmi.h>
-#include <linux/string.h>
-
-#define DRVNAME "gpio-nct5104d"
-
-/*
- * Super-I/O registers
- */
-#define SIO_LDSEL		0x07	/* Logical device select */
-#define SIO_CHIPID		0x20	/* Chaip ID (2 bytes) */
-#define SIO_GPIO_ENABLE	0x30	/* GPIO enable */
-#define SIO_GPIO1_MODE		0xE0	/* GPIO1 Mode OpenDrain/Push-Pull */
-#define SIO_GPIO2_MODE		0xE1	/* GPIO2 Mode OpenDrain/Push-Pull */
-
-#define SIO_LD_GPIO		0x07	/* GPIO logical device */
-#define SIO_LD_GPIO_MODE	0x0F	/* GPIO mode control device */
-#define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
-#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
-
-#define SIO_NCT5104D_ID					0x1061	/* Chip ID */
-#define SIO_PCENGINES_APU_NCT5104D_ID	0xc452	/* Chip ID */
-
-enum chips { nct5104d };
-
-static const char * const nct5104d_names[] = {
-	"nct5104d"
-};
-
-struct nct5104d_sio {
-	int addr;
-	enum chips type;
-};
-
-struct nct5104d_gpio_bank {
-	struct gpio_chip chip;
-	unsigned int regbase;
-	struct nct5104d_gpio_data *data;
-};
-
-struct nct5104d_gpio_data {
-	struct nct5104d_sio *sio;
-	int nr_bank;
-	struct nct5104d_gpio_bank *bank;
-};
-
-/*
- * Super-I/O functions.
- */
-
-static inline int superio_inb(int base, int reg)
-{
-	outb(reg, base);
-	return inb(base + 1);
-}
-
-static int superio_inw(int base, int reg)
-{
-	int val;
-
-	outb(reg++, base);
-	val = inb(base + 1) << 8;
-	outb(reg, base);
-	val |= inb(base + 1);
-
-	return val;
-}
-
-static inline void superio_outb(int base, int reg, int val)
-{
-	outb(reg, base);
-	outb(val, base + 1);
-}
-
-static inline int superio_enter(int base)
-{
-	/* Don't step on other drivers' I/O space by accident. */
-	if (!request_muxed_region(base, 2, DRVNAME)) {
-		pr_err(DRVNAME "I/O address 0x%04x already in use\n", base);
-		return -EBUSY;
-	}
-
-	/* According to the datasheet the key must be send twice. */
-	outb(SIO_UNLOCK_KEY, base);
-	outb(SIO_UNLOCK_KEY, base);
-
-	return 0;
-}
-
-static inline void superio_select(int base, int ld)
-{
-	outb(SIO_LDSEL, base);
-	outb(ld, base + 1);
-}
-
-static inline void superio_exit(int base)
-{
-	outb(SIO_LOCK_KEY, base);
-	release_region(base, 2);
-}
-
-/*
- * GPIO chip.
- */
-
-static int nct5104d_gpio_direction_in(struct gpio_chip *chip, unsigned offset);
-static int nct5104d_gpio_get(struct gpio_chip *chip, unsigned offset);
-static int nct5104d_gpio_direction_out(struct gpio_chip *chip,
-				     unsigned offset, int value);
-static void nct5104d_gpio_set(struct gpio_chip *chip, unsigned offset, int value);
-
-#define NCT5104D_GPIO_BANK(_base, _ngpio, _regbase)			\
-	{								\
-		.chip = {						\
-			.label            = DRVNAME,			\
-			.owner            = THIS_MODULE,		\
-			.direction_input  = nct5104d_gpio_direction_in,	\
-			.get              = nct5104d_gpio_get,		\
-			.direction_output = nct5104d_gpio_direction_out,	\
-			.set              = nct5104d_gpio_set,		\
-			.base             = _base,			\
-			.ngpio            = _ngpio,			\
-			.can_sleep        = true,			\
-		},							\
-		.regbase = _regbase,					\
-	}
-
-#define gpio_dir(base) (base + 0)
-#define gpio_data(base) (base + 1)
-
-static struct nct5104d_gpio_bank nct5104d_gpio_bank[] = {
-	NCT5104D_GPIO_BANK(0 , 8, 0xE0),
-	NCT5104D_GPIO_BANK(10, 8, 0xE4)
-};
-
-static int nct5104d_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
-{
-	int err;
-	struct nct5104d_gpio_bank *bank =
-		container_of(chip, struct nct5104d_gpio_bank, chip);
-	struct nct5104d_sio *sio = bank->data->sio;
-	u8 dir;
-
-	err = superio_enter(sio->addr);
-	if (err)
-		return err;
-	superio_select(sio->addr, SIO_LD_GPIO);
-
-	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
-	dir |= (1 << offset);
-	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
-
-	superio_exit(sio->addr);
-
-	return 0;
-}
-
-static int nct5104d_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	int err;
-	struct nct5104d_gpio_bank *bank =
-		container_of(chip, struct nct5104d_gpio_bank, chip);
-	struct nct5104d_sio *sio = bank->data->sio;
-	u8 data;
-
-	err = superio_enter(sio->addr);
-	if (err)
-		return err;
-	superio_select(sio->addr, SIO_LD_GPIO);
-
-	data = superio_inb(sio->addr, gpio_data(bank->regbase));
-
-	superio_exit(sio->addr);
-
-	return !!(data & 1 << offset);
-}
-
-static int nct5104d_gpio_direction_out(struct gpio_chip *chip,
-				     unsigned offset, int value)
-{
-	int err;
-	struct nct5104d_gpio_bank *bank =
-		container_of(chip, struct nct5104d_gpio_bank, chip);
-	struct nct5104d_sio *sio = bank->data->sio;
-	u8 dir, data_out;
-
-	err = superio_enter(sio->addr);
-	if (err)
-		return err;
-	superio_select(sio->addr, SIO_LD_GPIO);
-
-	data_out = superio_inb(sio->addr, gpio_data(bank->regbase));
-	if (value)
-		data_out |= (1 << offset);
-	else
-		data_out &= ~(1 << offset);
-	superio_outb(sio->addr, gpio_data(bank->regbase), data_out);
-
-	dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
-	dir &= ~(1 << offset);
-	superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
-
-	superio_exit(sio->addr);
-
-	return 0;
-}
-
-static void nct5104d_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	int err;
-	struct nct5104d_gpio_bank *bank =
-		container_of(chip, struct nct5104d_gpio_bank, chip);
-	struct nct5104d_sio *sio = bank->data->sio;
-	u8 data_out;
-
-	err = superio_enter(sio->addr);
-	if (err)
-		return;
-	superio_select(sio->addr, SIO_LD_GPIO);
-
-	data_out = superio_inb(sio->addr, gpio_data(bank->regbase));
-	if (value)
-		data_out |= (1 << offset);
-	else
-		data_out &= ~(1 << offset);
-	superio_outb(sio->addr, gpio_data(bank->regbase), data_out);
-
-	superio_exit(sio->addr);
-}
-
-/*
- * Platform device and driver.
- */
-
-static int nct5104d_gpio_probe(struct platform_device *pdev)
-{
-	int err;
-	int i;
-	struct nct5104d_sio *sio = pdev->dev.platform_data;
-	struct nct5104d_gpio_data *data;
-
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	switch (sio->type) {
-	case nct5104d:
-		data->nr_bank = ARRAY_SIZE(nct5104d_gpio_bank);
-		data->bank = nct5104d_gpio_bank;
-		break;
-	default:
-		return -ENODEV;
-	}
-	data->sio = sio;
-
-	platform_set_drvdata(pdev, data);
-
-	/* For each GPIO bank, register a GPIO chip. */
-	for (i = 0; i < data->nr_bank; i++) {
-		struct nct5104d_gpio_bank *bank = &data->bank[i];
-
-		bank->chip.dev = &pdev->dev;
-		bank->data = data;
-
-		err = gpiochip_add(&bank->chip);
-		if (err) {
-			dev_err(&pdev->dev,
-				"Failed to register gpiochip %d: %d\n",
-				i, err);
-			goto err_gpiochip;
-		}
-	}
-
-	return 0;
-
-err_gpiochip:
-	for (i = i - 1; i >= 0; i--) {
-		struct nct5104d_gpio_bank *bank = &data->bank[i];
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0)
-		int rm_err = gpiochip_remove(&bank->chip);
-		if (rm_err < 0)
-			dev_err(&pdev->dev,
-				"Failed to remove gpiochip %d: %d\n",
-				i, rm_err);
-#else /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
-		gpiochip_remove (&bank->chip);
-#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
-	}
-
-	return err;
-}
-
-static int nct5104d_gpio_remove(struct platform_device *pdev)
-{
-	int i;
-	struct nct5104d_gpio_data *data = platform_get_drvdata(pdev);
-
-	for (i = 0; i < data->nr_bank; i++) {
-		struct nct5104d_gpio_bank *bank = &data->bank[i];
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0)
-		int err = gpiochip_remove(&bank->chip);
-		if (err) {
-			dev_err(&pdev->dev,
-				"Failed to remove GPIO gpiochip %d: %d\n",
-				i, err);
-			return err;
-		}
-#else /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
-		gpiochip_remove (&bank->chip);
-#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
-	}
-
-	return 0;
-}
-
-static int __init nct5104d_find(int addr, struct nct5104d_sio *sio)
-{
-	int err;
-	u16 devid;
-	u8 gpio_cfg;
-
-	err = superio_enter(addr);
-	if (err)
-		return err;
-
-	err = -ENODEV;
-
-	devid = superio_inw(addr, SIO_CHIPID);
-	switch (devid) {
-	case SIO_NCT5104D_ID:
-	case SIO_PCENGINES_APU_NCT5104D_ID:
-		sio->type = nct5104d;
-		/* enable GPIO0 and GPIO1 */
-		superio_select(addr, SIO_LD_GPIO);
-		gpio_cfg = superio_inb(addr, SIO_GPIO_ENABLE);
-		gpio_cfg |= 0x03;
-		superio_outb(addr, SIO_GPIO_ENABLE, gpio_cfg);
-		break;
-	default:
-		pr_info(DRVNAME ": Unsupported device 0x%04x\n", devid);
-		goto err;
-	}
-	sio->addr = addr;
-	err = 0;
-
-	pr_info(DRVNAME ": Found %s at %#x chip id 0x%04x\n",
-		nct5104d_names[sio->type],
-		(unsigned int) addr,
-		(int) superio_inw(addr, SIO_CHIPID));
-
-        superio_select(sio->addr, SIO_LD_GPIO_MODE);
-        superio_outb(sio->addr, SIO_GPIO1_MODE, 0x0);
-        superio_outb(sio->addr, SIO_GPIO2_MODE, 0x0);
-
-err:
-	superio_exit(addr);
-	return err;
-}
-
-static struct platform_device *nct5104d_gpio_pdev;
-
-static int __init
-nct5104d_gpio_device_add(const struct nct5104d_sio *sio)
-{
-	int err;
-
-	nct5104d_gpio_pdev = platform_device_alloc(DRVNAME, -1);
-	if (!nct5104d_gpio_pdev)
-		pr_err(DRVNAME ": Error platform_device_alloc\n");
-	if (!nct5104d_gpio_pdev)
-		return -ENOMEM;
-
-	err = platform_device_add_data(nct5104d_gpio_pdev,
-				       sio, sizeof(*sio));
-	if (err) {
-		pr_err(DRVNAME "Platform data allocation failed\n");
-		goto err;
-	}
-
-	err = platform_device_add(nct5104d_gpio_pdev);
-	if (err) {
-		pr_err(DRVNAME "Device addition failed\n");
-		goto err;
-	}
-	pr_info(DRVNAME ": Device added\n");
-	return 0;
-
-err:
-	platform_device_put(nct5104d_gpio_pdev);
-
-	return err;
-}
-
-/*
- */
-
-static struct platform_driver nct5104d_gpio_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= DRVNAME,
-	},
-	.probe		= nct5104d_gpio_probe,
-	.remove		= nct5104d_gpio_remove,
-};
-
-static int __init nct5104d_gpio_init(void)
-{
-	int err;
-	struct nct5104d_sio sio;
-	const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-	const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
-
- 	/* Make sure we only run on PC Engine APU boards */
-	if (!board_name || !board_vendor || strcasecmp(board_vendor, "PC Engines") || strncasecmp(board_name, "apu", 3)) {
-		return -ENODEV;
-	}
-
-	if (nct5104d_find(0x2e, &sio) &&
-	    nct5104d_find(0x4e, &sio))
-		return -ENODEV;
-
-	err = platform_driver_register(&nct5104d_gpio_driver);
-	if (!err) {
-		pr_info(DRVNAME ": platform_driver_register\n");
-		err = nct5104d_gpio_device_add(&sio);
-		if (err)
-			platform_driver_unregister(&nct5104d_gpio_driver);
-	}
-
-	return err;
-}
-subsys_initcall(nct5104d_gpio_init);
-
-static void __exit nct5104d_gpio_exit(void)
-{
-	platform_device_unregister(nct5104d_gpio_pdev);
-	platform_driver_unregister(&nct5104d_gpio_driver);
-}
-module_exit(nct5104d_gpio_exit);
-
-MODULE_DESCRIPTION("GPIO driver for Super-I/O chips NCT5104D");
-MODULE_AUTHOR("Tasanakorn Phaipool <tasanakorn@gmail.com>");
-MODULE_LICENSE("GPL");

package/kernel/lantiq/ltq-vdsl-mei/Makefile

@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-vr9-mei
 PKG_VERSION:=1.5.17.6
-PKG_RELEASE:=3
+PKG_RELEASE:=1
 
 PKG_BASE_NAME:=drv_mei_cpe
 PKG_SOURCE:=$(PKG_BASE_NAME)-$(PKG_VERSION).tar.gz

package/kernel/lantiq/ltq-vdsl/Makefile

@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-vr9
 PKG_VERSION:=4.17.18.6
-PKG_RELEASE:=2
+PKG_RELEASE:=1
 
 PKG_BASE_NAME:=drv_dsl_cpe_api
 PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz

package/kernel/lantiq/ltq-vdsl/patches/110-semaphore-lock.patch

@@ -1,107 +0,0 @@
---- a/src/include/drv_dsl_cpe_pm_core.h
-+++ b/src/include/drv_dsl_cpe_pm_core.h
-@@ -1510,9 +1510,9 @@ typedef struct
-    /** Common PM module mutex*/
-    DSL_DRV_Mutex_t pmMutex;
-    /** PM module direction Near-End mutex*/
--   DSL_DRV_Mutex_t pmNeMutex;
-+   struct semaphore pmNeMutex;
-    /** PM module direction Far-End mutex*/
--   DSL_DRV_Mutex_t pmFeMutex;
-+   struct semaphore pmFeMutex;
-    /** PM module Near-End access mutex*/
-    DSL_DRV_Mutex_t pmNeAccessMutex;
-    /** PM module Far-End access mutex*/
---- a/src/pm/drv_dsl_cpe_api_pm.c
-+++ b/src/pm/drv_dsl_cpe_api_pm.c
-@@ -220,9 +220,9 @@ DSL_Error_t DSL_DRV_PM_Start(
-    /* init PM module common mutex */
-    DSL_DRV_MUTEX_INIT(DSL_DRV_PM_CONTEXT(pContext)->pmMutex);
-    /* init PM module direction Near-End mutex */
--   DSL_DRV_MUTEX_INIT(DSL_DRV_PM_CONTEXT(pContext)->pmNeMutex);
-+   sema_init(&(DSL_DRV_PM_CONTEXT(pContext)->pmNeMutex),1);
-    /* init PM module direction Far-End mutex */
--   DSL_DRV_MUTEX_INIT(DSL_DRV_PM_CONTEXT(pContext)->pmFeMutex);
-+   sema_init(&(DSL_DRV_PM_CONTEXT(pContext)->pmFeMutex),1);
-    /* init PM module Near-End access mutex */
-    DSL_DRV_MUTEX_INIT(DSL_DRV_PM_CONTEXT(pContext)->pmNeAccessMutex);
-    /* init PM module Far-End access mutex */
-@@ -592,7 +592,7 @@ DSL_Error_t DSL_DRV_PM_Stop(
-    if( DSL_DRV_PM_CONTEXT(pContext)->pmThreadFe.bRun != DSL_TRUE )
-    {
-       DSL_DEBUG(DSL_DBG_WRN,
--         (pContext, SYS_DBG_WRN"DSL[%02d]: PM module Near-End thread already stopped"
-+         (pContext, SYS_DBG_WRN"DSL[%02d]: PM module Far-End thread already stopped"
-          DSL_DRV_CRLF, DSL_DEV_NUM(pContext)));
-    }
-    else
---- a/src/pm/drv_dsl_cpe_pm_core.c
-+++ b/src/pm/drv_dsl_cpe_pm_core.c
-@@ -1022,7 +1022,7 @@ DSL_Error_t DSL_DRV_PM_DirectionMutexCon
-    {
-       if( bLock )
-       {
--         if( DSL_DRV_MUTEX_LOCK(DSL_DRV_PM_CONTEXT(pContext)->pmNeMutex) )
-+         if(down_interruptible(&(DSL_DRV_PM_CONTEXT(pContext)->pmNeMutex)))
-          {
-             DSL_DEBUG( DSL_DBG_ERR,
-                (pContext, SYS_DBG_ERR"DSL[%02d]: ERROR - Couldn't lock PM NE mutex!"
-@@ -1034,14 +1034,14 @@ DSL_Error_t DSL_DRV_PM_DirectionMutexCon
-       else
-       {
-           /* Unlock PM module NE Mutex*/
--          DSL_DRV_MUTEX_UNLOCK(DSL_DRV_PM_CONTEXT(pContext)->pmNeMutex);
-+          up(&(DSL_DRV_PM_CONTEXT(pContext)->pmNeMutex));
-       }
-    }
-    else
-    {
-       if( bLock )
-       {
--         if( DSL_DRV_MUTEX_LOCK(DSL_DRV_PM_CONTEXT(pContext)->pmFeMutex) )
-+         if(down_interruptible(&(DSL_DRV_PM_CONTEXT(pContext)->pmFeMutex)))
-          {
-             DSL_DEBUG( DSL_DBG_ERR,
-                (pContext, SYS_DBG_ERR"DSL[%02d]: ERROR - Couldn't lock PM FE mutex!"
-@@ -1053,7 +1053,7 @@ DSL_Error_t DSL_DRV_PM_DirectionMutexCon
-       else
-       {
-          /* Unlock PM module FE Mutex*/
--         DSL_DRV_MUTEX_UNLOCK(DSL_DRV_PM_CONTEXT(pContext)->pmFeMutex);
-+         up(&(DSL_DRV_PM_CONTEXT(pContext)->pmFeMutex));
-       }
-    }
- 
-@@ -1139,7 +1139,7 @@ DSL_Error_t DSL_DRV_PM_Lock(DSL_Context_
-    if( !(DSL_DRV_PM_CONTEXT(pContext)->bPmLock) )
-    {
-       /* Lock PM module Near-End Mutex*/
--      if( DSL_DRV_MUTEX_LOCK(DSL_DRV_PM_CONTEXT(pContext)->pmNeMutex) )
-+      if(down_interruptible(&(DSL_DRV_PM_CONTEXT(pContext)->pmNeMutex)))
-       {
-          DSL_DEBUG( DSL_DBG_ERR,
-             (pContext, SYS_DBG_ERR"DSL[%02d]: ERROR - Couldn't lock PM NE mutex!"
-@@ -1148,8 +1148,8 @@ DSL_Error_t DSL_DRV_PM_Lock(DSL_Context_
-          return DSL_ERR_SEMAPHORE_GET;
-       }
- 
--      /* Lock PM module Near-End Mutex*/
--      if( DSL_DRV_MUTEX_LOCK(DSL_DRV_PM_CONTEXT(pContext)->pmFeMutex) )
-+      /* Lock PM module Far-End Mutex*/
-+      if( down_interruptible(&(DSL_DRV_PM_CONTEXT(pContext)->pmFeMutex)) )
-       {
-          DSL_DEBUG( DSL_DBG_ERR,
-             (pContext, SYS_DBG_ERR"DSL[%02d]: ERROR - Couldn't lock PM FE mutex!"
-@@ -1193,10 +1193,10 @@ DSL_Error_t DSL_DRV_PM_UnLock(DSL_Contex
-    if( DSL_DRV_PM_CONTEXT(pContext)->bPmLock )
-    {
-       /* Unlock PM module NE Mutex*/
--      DSL_DRV_MUTEX_UNLOCK(DSL_DRV_PM_CONTEXT(pContext)->pmNeMutex);
-+      up(&(DSL_DRV_PM_CONTEXT(pContext)->pmNeMutex));
- 
-       /* Unlock PM module FE Mutex*/
--      DSL_DRV_MUTEX_UNLOCK(DSL_DRV_PM_CONTEXT(pContext)->pmFeMutex);
-+      up(&(DSL_DRV_PM_CONTEXT(pContext)->pmFeMutex));
- 
-       /* Clear bPmLock flag*/
-       DSL_DRV_PM_CONTEXT(pContext)->bPmLock = DSL_FALSE;

package/kernel/leds-apu2/Makefile

@@ -1,52 +0,0 @@
-#
-# Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=leds-apu2
-PKG_RELEASE:=1
-
-PKG_MAINTAINER:=Chris Blake <chrisrblake93@gmail.com>
-PKG_LICENSE:=GPL-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/leds-apu2
-  SUBMENU:=LED modules
-  TITLE:= PC Engines APU2/APU3 LED support
-  DEPENDS:= @GPIO_SUPPORT @TARGET_x86
-  FILES:=$(PKG_BUILD_DIR)/leds-apu2.ko
-  AUTOLOAD:=$(call AutoLoad,41,leds-apu2,1)
-  KCONFIG:=
-endef
-
-define KernelPackage/leds-apu2/description
-  Driver for the PC Engines APU2/APU3 LEDs & Reset Button.
-endef
-
-EXTRA_KCONFIG:= \
-	CONFIG_LEDS_APU2=m
-
-EXTRA_CFLAGS:= \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(EXTRA_KCONFIG)))) \
-	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(EXTRA_KCONFIG)))) \
-
-MAKE_OPTS:= \
-	ARCH="$(LINUX_KARCH)" \
-	CROSS_COMPILE="$(TARGET_CROSS)" \
-	SUBDIRS="$(PKG_BUILD_DIR)" \
-	EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
-	$(EXTRA_KCONFIG)
-
-define Build/Compile
-	 $(MAKE) -C "$(LINUX_DIR)" \
-		$(MAKE_OPTS) \
-		modules
-endef
-
-$(eval $(call KernelPackage,leds-apu2))

package/kernel/leds-apu2/src/Kconfig

@@ -1,8 +0,0 @@
-config LEDS_APU2
-        tristate "PC Engines APU2/APU3 LED support"
-        depends on LEDS_CLASS
-        depends on LEDS_GPIO
-        depends on GPIOLIB
-        help
-          Say yes here to enable support for the CPU GPIO pins on the PC Engines
-          APU2/APU3 board, which enables the front LEDs and Reset Button.

package/kernel/leds-apu2/src/Makefile

@@ -1 +0,0 @@
-obj-${CONFIG_LEDS_APU2}    += leds-apu2.o

package/kernel/leds-apu2/src/leds-apu2.c

@@ -1,374 +0,0 @@
-/*
-*  APU2 LED/GPIO Driver
-*  Copyright (c) 2016 Christian Lamparter <chunkeey (at) googlemail.com>
-*
-*  Based on gpio-apu2.c - AMD FCH GPIO support for PC-Engines APU-2 board
-*
-*  Copyright (c) 2015  Carsten Spiess <fli4l at carsten-spiess.de>
-*
-*  This program is free software; you can redistribute it and/or modify
-*  it under the terms of the GNU General Public License as published by
-*  the Free Software Foundation; either version 2 of the License, or
-*  (at your option) any later version.
-*
-*  This program is distributed in the hope that it will be useful,
-*  but WITHOUT ANY WARRANTY; without even the implied warranty of
-*  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-*  GNU General Public License for more details.
-*
-*  You should have received a copy of the GNU General Public License
-*  along with this program; if not, write to the Free Software
-*  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/version.h>
-#include <linux/dmi.h>
-#include <linux/string.h>
-
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#define DEVNAME                 "leds-apu2"
-
-#define FCH_ACPI_MMIO_BASE      0xFED80000
-#define FCH_GPIO_BASE           (FCH_ACPI_MMIO_BASE + 0x1500)
-#define FCH_GPIO_SIZE           0x300
-
-#define APU_NUM_GPIO            4
-
-#define GPIO_BIT_DIR            23
-#define GPIO_BIT_WRITE          22
-#define GPIO_BIT_READ           16
-
-/* internal variables */
-static struct pci_dev *gpio_apu2_pci;
-static DEFINE_SPINLOCK (gpio_lock);
-
-/* the watchdog platform device */
-static struct platform_device *gpio_apu2_platform_device;
-static struct platform_device *leddev;
-static struct platform_device *keydev;
-
-static const struct pci_device_id gpio_apu2_pci_tbl[] ={
-	{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, PCI_ANY_ID, PCI_ANY_ID},
-	{ 0, } /* End of list */
-};
-MODULE_DEVICE_TABLE (pci, gpio_apu2_pci_tbl);
-
-/* EGPIO89=GPIO32, AGPIO68=GPIO57, AGPIO69=GPIO58, AGPIO70=GPIO59 */
-static u8 gpio_offset[APU_NUM_GPIO] = {89, 68, 69, 70};
-
-static void __iomem *gpio_addr[APU_NUM_GPIO] = {NULL, NULL, NULL, NULL};
-
-static int gpio_apu2_get_dir (struct gpio_chip *chip, unsigned offset)
-{
-	u32 val;
-
-	val = ~ioread32 (gpio_addr[offset]);
-
-	return (val >> GPIO_BIT_DIR) & 1;
-}
-
-static int gpio_apu2_dir_in (struct gpio_chip *gc, unsigned offset)
-{
-	u32 val;
-
-	spin_lock_bh (&gpio_lock);
-
-	val = ioread32 (gpio_addr[offset]);
-	val &= ~BIT(GPIO_BIT_DIR);
-	iowrite32 (val, gpio_addr[offset]);
-
-	spin_unlock_bh (&gpio_lock);
-
-	return 0;
-}
-
-static int gpio_apu2_dir_out (struct gpio_chip *chip, unsigned offset,
-		int value)
-{
-	u32 val;
-
-	spin_lock_bh (&gpio_lock);
-
-	val = ioread32 (gpio_addr[offset]);
-	val |= BIT(GPIO_BIT_DIR);
-	iowrite32 (val, gpio_addr[offset]);
-
-	spin_unlock_bh (&gpio_lock);
-
-	return 0;
-}
-
-static int gpio_apu2_get_data (struct gpio_chip *chip, unsigned offset)
-{
-	u32 val;
-
-	val = ioread32 (gpio_addr[offset]);
-
-	return (val >> GPIO_BIT_READ) & 1;
-}
-
-static void gpio_apu2_set_data (struct gpio_chip *chip, unsigned offset, int value)
-{
-	u32 val;
-
-	spin_lock_bh (&gpio_lock);
-
-	val = ioread32 (gpio_addr[offset]);
-
-	if (value)
-		val |= BIT(GPIO_BIT_WRITE);
-	else
-		val &= ~BIT(GPIO_BIT_WRITE);
-
-	iowrite32 (val, gpio_addr[offset]);
-
-	spin_unlock_bh (&gpio_lock);
-}
-
-static struct gpio_chip gpio_apu2_chip = {
-	.label = DEVNAME,
-	.owner = THIS_MODULE,
-	.base = -1,
-	.ngpio = APU_NUM_GPIO,
-	.get_direction = gpio_apu2_get_dir,
-	.direction_input = gpio_apu2_dir_in,
-	.direction_output = gpio_apu2_dir_out,
-	.get = gpio_apu2_get_data,
-	.set = gpio_apu2_set_data,
-};
-
-/*
- *
- */
-static int gpio_apu2_probe (struct platform_device *dev)
-{
-	int ret = 0;
-	int i;
-	struct pci_dev *pci_dev = NULL;
-
-	/* Match the PCI device */
-	for_each_pci_dev (pci_dev) {
-		if (pci_match_id (gpio_apu2_pci_tbl, pci_dev) != NULL) {
-			gpio_apu2_pci = pci_dev;
-			break;
-		}
-	}
-
-	if (!gpio_apu2_pci)
-		return -ENODEV;
-
-	pr_info ("%s: PCI Revision ID: 0x%x\n", DEVNAME, gpio_apu2_pci->revision);
-
-	/* Determine type of southbridge chipset */
-	if (gpio_apu2_pci->revision < 0x40) {
-		return -EACCES;
-	}
-
-	/* Request memory region for GPIO's */
-	if (!devm_request_mem_region (&dev->dev, FCH_GPIO_BASE,
-		FCH_GPIO_SIZE, DEVNAME)){
-		pr_err ("%s: request GPIO mem region failed\n", DEVNAME);
-		return -ENXIO;
-	}
-
-	/* Map IO's for GPIO's */
-	for (i = 0; i < APU_NUM_GPIO; i++) {
-		gpio_addr[i] = devm_ioremap (&dev->dev,
-			FCH_GPIO_BASE + (gpio_offset[i] * sizeof (u32)), sizeof (u32));
-		if (!gpio_addr[i]) {
-			pr_err ("%s: map GPIO%d address failed\n", DEVNAME, gpio_offset[i]);
-			return -ENXIO;
-		}
-	}
-
-	gpio_apu2_chip.dev = &dev->dev;
-	ret = gpiochip_add (&gpio_apu2_chip);
-	if (ret) {
-		pr_err ("%s: adding gpiochip failed\n", DEVNAME);
-	}
-
-	return ret;
-}
-
-static int gpio_apu2_remove (struct platform_device *dev)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0)
-	int ret;
-	ret = gpiochip_remove (&gpio_apu2_chip);
-#else /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
-	gpiochip_remove (&gpio_apu2_chip);
-#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,18,0) */
-	return 0;
-}
-
-static struct platform_driver gpio_apu2_driver = {
-	.probe = gpio_apu2_probe,
-	.remove = gpio_apu2_remove,
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = DEVNAME
-	}
-};
-
-static struct gpio_led apu2_leds_gpio[] = {
-        {
-                .name           = "apu2:green:power",
-                .gpio           = 509,
-                .active_low     = 1,
-        },
-        {
-                .name           = "apu2:green:led2",
-                .gpio           = 510,
-                .active_low     = 1,
-        },
-        {
-                .name           = "apu2:green:led3",
-                .gpio           = 511,
-                .active_low     = 1,
-        },
-};
-
-static struct gpio_keys_button apu2_gpio_keys[] = {
-	{
-		.desc           = "Reset button",
-		.type           = EV_KEY,
-		.code           = KEY_RESTART,
-		.debounce_interval = 60,
-		.gpio           = 508,
-		.active_low     = 1,
-	},
-};
-
-static void register_gpio_keys_polled(int id, unsigned poll_interval,
-				      unsigned nbuttons,
-				      struct gpio_keys_button *buttons)
-{
-	struct gpio_keys_platform_data pdata = { };
-	int err;
-
-	keydev = platform_device_alloc("gpio-keys-polled", id);
-	if (!keydev) {
-		printk(KERN_ERR "Failed to allocate gpio-keys platform device\n");
-		return;
-	}
-
-	pdata.poll_interval = poll_interval;
-	pdata.nbuttons = nbuttons;
-	pdata.buttons = buttons;
-
-	err = platform_device_add_data(keydev, &pdata, sizeof(pdata));
-	if (err) {
-		dev_err(&keydev->dev, "failed to add platform data to key driver (%d)", err);
-		goto err_put_pdev;
-	}
-
-	err = platform_device_add(keydev);
-	if (err) {
-		dev_err(&keydev->dev, "failed to register key platform device (%d)", err);
-		goto err_put_pdev;
-	}
-
-	return;
-
-err_put_pdev:
-	platform_device_put(keydev);
-	keydev = NULL;
-}
-
-static void register_leds_gpio(int id, unsigned num_leds, struct gpio_led *leds)
-{
-	struct gpio_led_platform_data pdata = { };
-	int err;
-
-	leddev = platform_device_alloc("leds-gpio", id);
-	if (!leddev) {
-		printk(KERN_ERR "Failed to allocate leds-gpio platform device\n");
-		return;
-	}
-
-	pdata.num_leds = num_leds;
-	pdata.leds = leds;
-
-	err = platform_device_add_data(leddev, &pdata, sizeof(pdata));
-	if (err) {
-		dev_err(&leddev->dev, "failed to add platform data to key driver (%d)", err);
-		goto err_put_pdev;
-	}
-
-	err = platform_device_add(leddev);
-	if (err) {
-		dev_err(&leddev->dev, "failed to register key platform device (%d)", err);
-		goto err_put_pdev;
-	}
-
-	return;
-
-err_put_pdev:
-	platform_device_put(leddev);
-	leddev = NULL;
-}
-
-static int __init gpio_apu2_init (void)
-{
-	int err;
-	const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-	const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
-
-	/* Match the device name/model */
-	if (!board_name || !board_vendor || strcasecmp(board_vendor, "PC Engines") || strcasecmp(board_name, "apu2")) {
-		err = -ENODEV;
-		goto exit;
-	}
-
-	pr_info ("%s: load APU2/LED GPIO driver module\n", DEVNAME);
-
-	err = platform_driver_register (&gpio_apu2_driver);
-	if (err)
-		goto exit;
-
-	gpio_apu2_platform_device = platform_device_register_simple (DEVNAME, -1, NULL, 0);
-	if (IS_ERR(gpio_apu2_platform_device)) {
-		err = PTR_ERR(gpio_apu2_platform_device);
-		goto exit_driver;
-	}
-
-	pr_info ("%s: APU2 GPIO/LED driver module loaded\n", DEVNAME);
-
-	register_leds_gpio(-1, ARRAY_SIZE(apu2_leds_gpio), apu2_leds_gpio);
-	register_gpio_keys_polled(-1, 20, ARRAY_SIZE(apu2_gpio_keys), apu2_gpio_keys);
-	return 0;
-
-exit_driver:
-	platform_driver_unregister (&gpio_apu2_driver);
-exit:
-	return err;
-}
-
-static void __exit gpio_apu2_exit (void)
-{
-	platform_device_unregister (gpio_apu2_platform_device);
-	platform_device_unregister (leddev);
-	platform_device_unregister (keydev);
-	platform_driver_unregister (&gpio_apu2_driver);
-	pr_info ("%s: APU2 GPIO/LED driver module unloaded\n", DEVNAME);
-}
-
-MODULE_AUTHOR ("Carsten Spiess <fli4l at carsten-spiess.de>");
-MODULE_DESCRIPTION("GPIO driver for AMD FCH on PC-Engines APU-2");
-MODULE_LICENSE("GPL");
-
-module_init (gpio_apu2_init);
-module_exit (gpio_apu2_exit);

package/kernel/linux/modules/crypto.mk

@@ -436,7 +436,7 @@ endef
 
 define KernelPackage/crypto-md5/octeon
   FILES+=$(LINUX_DIR)/arch/mips/cavium-octeon/crypto/octeon-md5.ko
-  AUTOLOAD+=$(call AutoLoad,09,octeon-md5)
+  AUTOLOAD:=$(call AutoLoad,09,octeon-md5)
 endef
 
 $(eval $(call KernelPackage,crypto-md5))
@@ -468,12 +468,12 @@ endef
 
 define KernelPackage/crypto-sha1/octeon
   FILES+=$(LINUX_DIR)/arch/mips/cavium-octeon/crypto/octeon-sha1.ko
-  AUTOLOAD+=$(call AutoLoad,09,octeon-sha1)
+  AUTOLOAD:=$(call AutoLoad,09,octeon-sha1)
 endef
 
 define KernelPackage/crypto-sha1/x86/64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha1-ssse3.ko
-  AUTOLOAD+=$(call AutoLoad,09,sha1-ssse3)
+  AUTOLOAD:=$(call AutoLoad,09,sha1-ssse3)
 endef
 
 $(eval $(call KernelPackage,crypto-sha1))
@@ -493,12 +493,12 @@ endef
 
 define KernelPackage/crypto-sha256/octeon
   FILES+=$(LINUX_DIR)/arch/mips/cavium-octeon/crypto/octeon-sha256.ko
-  AUTOLOAD+=$(call AutoLoad,09,octeon-sha256)
+  AUTOLOAD:=$(call AutoLoad,09,octeon-sha256)
 endef
 
 define KernelPackage/crypto-sha256/x86/64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha256-ssse3.ko
-  AUTOLOAD+=$(call AutoLoad,09,sha256-ssse3)
+  AUTOLOAD:=$(call AutoLoad,09,sha256-ssse3)
 endef
 
 $(eval $(call KernelPackage,crypto-sha256))
@@ -518,12 +518,12 @@ endef
 
 define KernelPackage/crypto-sha512/octeon
   FILES+=$(LINUX_DIR)/arch/mips/cavium-octeon/crypto/octeon-sha512.ko
-  AUTOLOAD+=$(call AutoLoad,09,octeon-sha512)
+  AUTOLOAD:=$(call AutoLoad,09,octeon-sha512)
 endef
 
 define KernelPackage/crypto-sha512/x86/64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha512-ssse3.ko
-  AUTOLOAD+=$(call AutoLoad,09,sha512-ssse3)
+  AUTOLOAD:=$(call AutoLoad,09,sha512-ssse3)
 endef
 
 $(eval $(call KernelPackage,crypto-sha512))

package/kernel/linux/modules/netfilter.mk

@@ -360,6 +360,8 @@ define KernelPackage/nf-nathelper/description
  Default Netfilter (IPv4) Conntrack and NAT helpers
  Includes:
  - ftp
+ - irc
+ - tftp
 endef
 
 $(eval $(call KernelPackage,nf-nathelper))
@@ -379,13 +381,11 @@ define KernelPackage/nf-nathelper-extra/description
  Includes:
  - amanda
  - h323
- - irc
  - mms
  - pptp
  - proto_gre
  - sip
  - snmp_basic
- - tftp
  - broadcast
 endef
 
@@ -495,7 +495,7 @@ $(eval $(call KernelPackage,ipt-tproxy))
 
 define KernelPackage/ipt-tee
   TITLE:=TEE support
-  DEPENDS:=+kmod-ipt-conntrack
+  DEPENDS:=+kmod-ipt-conntrack @!LINUX_4_4
   KCONFIG:= \
   	CONFIG_NETFILTER_XT_TARGET_TEE
   FILES:= \

package/kernel/linux/modules/nls.mk

@@ -147,38 +147,6 @@ endef
 $(eval $(call KernelPackage,nls-cp932))
 
 
-define KernelPackage/nls-cp936
-  SUBMENU:=Native Language Support
-  TITLE:=Codepage 936 (Simplified Chinese)
-  KCONFIG:=CONFIG_NLS_CODEPAGE_936
-  FILES:=$(LINUX_DIR)/fs/nls/nls_cp936.ko
-  AUTOLOAD:=$(call AutoLoad,25,nls_cp936)
-  $(call AddDepends/nls)
-endef
-
-define KernelPackage/nls-cp936/description
-  Kernel module for NLS Codepage 936 (Simplified Chinese)
-endef
-
-$(eval $(call KernelPackage,nls-cp936))
-
-
-define KernelPackage/nls-cp950
-  SUBMENU:=Native Language Support
-  TITLE:=Codepage 950 (Traditional Chinese)
-  KCONFIG:=CONFIG_NLS_CODEPAGE_950
-  FILES:=$(LINUX_DIR)/fs/nls/nls_cp950.ko
-  AUTOLOAD:=$(call AutoLoad,25,nls_cp950)
-  $(call AddDepends/nls)
-endef
-
-define KernelPackage/nls-cp950/description
-  Kernel module for NLS Codepage 950 (Traditional Chinese)
-endef
-
-$(eval $(call KernelPackage,nls-cp950))
-
-
 define KernelPackage/nls-cp1250
   SUBMENU:=Native Language Support
   TITLE:=Codepage 1250 (Eastern Europe)

package/kernel/linux/modules/sound.mk

@@ -67,7 +67,7 @@ define KernelPackage/sound-core/uml
   FILES:= \
 	$(LINUX_DIR)/sound/soundcore.ko \
 	$(LINUX_DIR)/arch/um/drivers/hostaudio.ko
-  AUTOLOAD+=$(call AutoLoad,30,soundcore hostaudio)
+  AUTOLOAD:=$(call AutoLoad,30,soundcore hostaudio)
 endef
 
 define KernelPackage/sound-core/description

package/kernel/linux/modules/video.mk

@@ -47,7 +47,7 @@ define KernelPackage/backlight-pwm
 	AUTOLOAD:=$(call AutoProbe,video pwm_bl)
 endef
 
-define KernelPackage/backlight-pwm/description
+define KernelPackage/backlight/backlight-pwm
 	Kernel module for PWM based Backlight support.
 endef
 
@@ -72,7 +72,7 @@ endef
 
 define KernelPackage/fb/x86
   FILES+=$(LINUX_DIR)/arch/x86/video/fbdev.ko
-  AUTOLOAD+=$(call AutoLoad,06,fbdev fb)
+  AUTOLOAD:=$(call AutoLoad,06,fbdev fb)
 endef
 
 $(eval $(call KernelPackage,fb))

package/kernel/mac80211/Makefile

@@ -10,13 +10,13 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=2017-01-31
-PKG_RELEASE:=3
+PKG_VERSION:=2016-10-08
+PKG_RELEASE:=1
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
 PKG_BACKPORT_VERSION:=
-PKG_HASH:=75e6d39e34cf156212a2509172a4a62b673b69eb4a1d9aaa565f7fa719fa2317
+PKG_HASH:=4f6350e3b75815060bfdf47ef266ad613c7bfea5b7b1dc4552dee69e1bebe4fb
 
-PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.xz
+PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
 PKG_BUILD_PARALLEL:=1
 
@@ -35,7 +35,7 @@ PKG_DRIVERS = \
 	libertas-sdio libertas-usb libertas-spi \
 	mac80211-hwsim \
 	mt7601u \
-	mwl8k mwifiex-pcie mwifiex-sdio \
+	mwl8k mwifiex-pcie \
 	p54-common p54-pci p54-spi p54-usb \
 	rt2x00-lib rt2x00-pci rt2x00-usb \
 	rt2400-pci rt2500-pci rt2500-usb \
@@ -68,8 +68,6 @@ PKG_CONFIG_DEPENDS:= \
 	CONFIG_PACKAGE_BRCM80211_DEBUG \
 	CONFIG_PACKAGE_IWLWIFI_DEBUG \
 	CONFIG_PACKAGE_IWLWIFI_DEBUGFS \
-	CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS \
-	CONFIG_PACKAGE_RT2X00_DEBUG \
 	CONFIG_PACKAGE_RTLWIFI_DEBUG \
 	CONFIG_ATH9K_SUPPORT_PCOEM \
 	CONFIG_ATH9K_TX99 \
@@ -250,7 +248,7 @@ define KernelPackage/ath9k/config
 		depends on PACKAGE_kmod-ath9k
 
        config ATH9K_TX99
-               bool "Enable TX99 support (WARNING: testing only, breaks normal operation!)"
+               bool "Enable TX99 support"
                depends on PACKAGE_kmod-ath9k
 
 	config ATH9K_UBNTHSR
@@ -1024,7 +1022,7 @@ endef
 define KernelPackage/mac80211-hwsim
   $(call KernelPackage/mac80211/Default)
   TITLE:=mac80211 HW simulation device
-  DEPENDS+= +kmod-mac80211 +@DRIVER_11AC_SUPPORT +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT
+  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko
   AUTOLOAD:=$(call AutoProbe,mac80211_hwsim)
 endef
@@ -1057,7 +1055,7 @@ define KernelPackage/mwifiex-pcie
   $(call KernelPackage/mac80211/Default)
   TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards
   URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
-  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-pcie-firmware
+  DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwifiex-pcie-firmware
   FILES:= \
 	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \
 	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_pcie.ko
@@ -1068,21 +1066,6 @@ define KernelPackage/mwifiex-pcie/description
  Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards
 endef
 
-define KernelPackage/mwifiex-sdio
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Driver for Marvell 802.11n/802.11ac SDIO Wireless cards
-  URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
-  DEPENDS+= +kmod-mmc +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-sdio-firmware
-  FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_sdio.ko
-  AUTOLOAD:=$(call AutoProbe,mwifiex_sdio)
-endef
-
-define KernelPackage/mwifiex-sdio/description
- Kernel modules for Marvell 802.11n/802.11ac SDIO Wireless cards
-endef
-
 define KernelPackage/p54/Default
   $(call KernelPackage/mac80211/Default)
   TITLE:=Prism54 Drivers
@@ -1615,7 +1598,6 @@ config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB
 config-$(call config_package,libertas-spi) += LIBERTAS LIBERTAS_SPI
 config-$(call config_package,mwl8k) += MWL8K
 config-$(call config_package,mwifiex-pcie) += MWIFIEX MWIFIEX_PCIE
-config-$(call config_package,mwifiex-sdio) += MWIFIEX MWIFIEX_SDIO
 config-$(call config_package,rtl8180) += RTL8180
 config-$(call config_package,rtl8187) += RTL8187
 config-$(call config_package,wlcore) += WLCORE WLCORE_SDIO
@@ -1811,7 +1793,6 @@ $(eval $(call KernelPackage,mac80211-hwsim))
 $(eval $(call KernelPackage,mt7601u))
 $(eval $(call KernelPackage,mwl8k))
 $(eval $(call KernelPackage,mwifiex-pcie))
-$(eval $(call KernelPackage,mwifiex-sdio))
 $(eval $(call KernelPackage,p54-common))
 $(eval $(call KernelPackage,p54-pci))
 $(eval $(call KernelPackage,p54-usb))

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -268,7 +268,7 @@ mac80211_hostapd_setup_base() {
 			vht_max_mpdu_hw=11454
 		[ "$vht_max_mpdu_hw" != 3895 ] && \
 			vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]"
-
+			
 		# maximum A-MPDU length exponent
 		vht_max_a_mpdu_len_exp_hw=0
 		[ "$(($vht_cap & 58720256))" -ge 8388608 -a 1 -le "$vht_max_a_mpdu_len_exp" ] && \
@@ -566,7 +566,7 @@ mac80211_setup_adhoc() {
 	[ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
 
 	iw dev "$ifname" ibss join "$ssid" $freq $ibss_htmode fixed-freq $bssid \
-		beacon-interval $beacon_int \
+		${beacon_int:+beacon-interval $beacon_int} \
 		${brstr:+basic-rates $brstr} \
 		${mcval:+mcast-rate $mcval} \
 		${keyspec:+keys $keyspec}
@@ -646,9 +646,7 @@ mac80211_setup_vif() {
 				esac
 
 				freq="$(get_freq "$phy" "$channel")"
-				iw dev "$ifname" mesh join "$mesh_id" freq $freq $mesh_htmode \
-					${mcval:+mcast-rate $mcval} \
-					beacon-interval $beacon_int
+				iw dev "$ifname" mesh join "$mesh_id" freq $freq $mesh_htmode ${mcval:+mcast-rate $mcval}
 			fi
 
 			for var in $MP_CONFIG_INT $MP_CONFIG_BOOL $MP_CONFIG_STRING; do
@@ -700,7 +698,7 @@ drv_mac80211_setup() {
 		country chanbw distance \
 		txpower antenna_gain \
 		rxantenna txantenna \
-		frag rts beacon_int:100 htmode
+		frag rts beacon_int htmode
 	json_get_values basic_rate_list basic_rate
 	json_select ..
 

package/kernel/mac80211/files/lib/wifi/mac80211.sh

@@ -92,7 +92,7 @@ detect_mac80211() {
 			htmode="VHT80"
 		}
 
-		[ -n "$htmode" ] && ht_capab="set wireless.radio${devidx}.htmode=$htmode"
+		[ -n $htmode ] && ht_capab="set wireless.radio${devidx}.htmode=$htmode"
 
 		if [ -x /usr/bin/readlink -a -h /sys/class/ieee80211/${dev} ]; then
 			path="$(readlink -f /sys/class/ieee80211/${dev}/device)"

package/kernel/mac80211/files/regdb.txt

@@ -85,20 +85,12 @@ country AT: DFS-ETSI
 	# 60 GHz band channels 1-4, ref: Etsi En 302 567
 	(57000 - 66000 @ 2160), (40)
 
-# Source:
-# https://www.legislation.gov.au/Details/F2016C00432
-# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B.
-# The EIRP for DFS bands can be increased by 3dB if TPC is implemented.
-# In order to allow 80MHz operation between 5650-5730MHz the upper boundary
-# of this more restrictive band has been shifted up by 5MHz from 5725MHz.
 country AU: DFS-ETSI
-	(2400 - 2483.5 @ 40), (36)
-	(5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
-	(5250 - 5350 @ 80), (20), NO-OUTDOOR, AUTO-BW, DFS
-	(5470 - 5600 @ 80), (27), DFS
-	(5650 - 5730 @ 80), (27), DFS
-	(5730 - 5850 @ 80), (36)
-	(57000 - 66000 @ 2160), (43), NO-OUTDOOR
+	(2402 - 2482 @ 40), (20)
+	(5170 - 5250 @ 80), (17), AUTO-BW
+	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
+	(5490 - 5710 @ 160), (24), DFS
+	(5735 - 5835 @ 80), (30)
 
 country AW: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
@@ -238,9 +230,9 @@ country BZ: DFS-JP
 
 country CA: DFS-FCC
 	(2402 - 2472 @ 40), (30)
-	(5150 - 5250 @ 80), (23), AUTO-BW
-	(5250 - 5350 @ 80), (24), DFS, AUTO-BW
-	(5470 - 5600 @ 80), (24), DFS
+	(5170 - 5250 @ 80), (17), AUTO-BW
+	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
+	(5490 - 5600 @ 80), (24), DFS
 	(5650 - 5730 @ 80), (24), DFS
 	(5735 - 5835 @ 80), (30)
 
@@ -588,10 +580,11 @@ country IL: DFS-ETSI
 	(5150 - 5250 @ 80), (200 mW), NO-OUTDOOR, AUTO-BW
 	(5250 - 5350 @ 80), (200 mW), NO-OUTDOOR, DFS, AUTO-BW
 
-country IN:
+country IN: DFS-JP
 	(2402 - 2482 @ 40), (20)
-	(5150 - 5350 @ 160), (23)
-	(5725 - 5875 @ 80), (23)
+	(5170 - 5250 @ 80), (20), AUTO-BW
+	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
+	(5735 - 5835 @ 80), (20)
 
 country IR: DFS-JP
 	(2402 - 2482 @ 40), (20)

package/kernel/mac80211/patches/002-change_allconfig.patch

@@ -1,6 +1,6 @@
 --- a/kconf/conf.c
 +++ b/kconf/conf.c
-@@ -594,40 +594,12 @@ int main(int ac, char **av)
+@@ -593,40 +593,12 @@ int main(int ac, char **av)
  	case oldconfig:
  	case listnewconfig:
  	case olddefconfig:
@@ -44,7 +44,7 @@
  		break;
 --- a/kconf/confdata.c
 +++ b/kconf/confdata.c
-@@ -1170,6 +1170,8 @@ bool conf_set_all_new_symbols(enum conf_
+@@ -1169,6 +1169,8 @@ bool conf_set_all_new_symbols(enum conf_
  	}
  	bool has_changed = false;
  
@@ -53,7 +53,7 @@
  	for_all_symbols(i, sym) {
  		if (sym_has_value(sym) || (sym->flags & SYMBOL_VALID))
  			continue;
-@@ -1213,8 +1215,6 @@ bool conf_set_all_new_symbols(enum conf_
+@@ -1212,8 +1214,6 @@ bool conf_set_all_new_symbols(enum conf_
  
  	}
  

package/kernel/mac80211/patches/004-fix_duplicate_skcipher_backport.patch

@@ -0,0 +1,11 @@
+--- a/compat/Makefile
++++ b/compat/Makefile
+@@ -35,8 +35,6 @@ compat-$(CPTCFG_KERNEL_4_6) += backport-
+ 
+ compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o
+ compat-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += crypto-skcipher.o
+-skcipher-objs += crypto-skcipher.o
+-obj-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += skcipher.o
+ compat-$(CPTCFG_BPAUTO_BUILD_WANT_DEV_COREDUMP) += drivers-base-devcoredump.o
+ compat-$(CPTCFG_BPAUTO_RHASHTABLE) += lib-rhashtable.o
+ cordic-objs += lib-cordic.o

package/kernel/mac80211/patches/004-kconfig_backport_fix.patch

@@ -1,28 +0,0 @@
---- a/backport-include/linux/kconfig.h
-+++ b/backport-include/linux/kconfig.h
-@@ -5,6 +5,8 @@
- #include_next <linux/kconfig.h>
- #endif
- 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)
-+
- #ifndef __ARG_PLACEHOLDER_1
- #define __ARG_PLACEHOLDER_1 0,
- #define config_enabled(cfg) _config_enabled(cfg)
-@@ -16,6 +18,7 @@
-  * 3.1 - 3.3 had a broken version of this, so undef
-  * (they didn't have __ARG_PLACEHOLDER_1)
-  */
-+
- #undef IS_ENABLED
- #define IS_ENABLED(option) \
-         (config_enabled(option) || config_enabled(option##_MODULE))
-@@ -24,6 +27,8 @@
- #undef IS_BUILTIN
- #define IS_BUILTIN(option) config_enabled(option)
- 
-+#endif
-+
- #ifndef IS_REACHABLE
- /*
-  * IS_REACHABLE(CONFIG_FOO) evaluates to 1 if the currently compiled

package/kernel/mac80211/patches/005-backport_skb_get_hash_perturb.patch

@@ -0,0 +1,22 @@
+--- a/backport-include/linux/skbuff.h
++++ b/backport-include/linux/skbuff.h
+@@ -305,6 +305,19 @@ static inline void skb_free_frag(void *d
+ {
+ 	put_page(virt_to_head_page(data));
+ }
++
++#include <net/flow_keys.h>
++#include <linux/jhash.h>
++
++static inline u32 skb_get_hash_perturb(struct sk_buff *skb, u32 key)
++{
++	struct flow_keys keys;
++
++	skb_flow_dissect(skb, &keys);
++	return jhash_3words((__force u32)keys.dst,
++			    (__force u32)keys.src ^ keys.ip_proto,
++			    (__force u32)keys.ports, key);
++}
+ #endif
+ 
+ #endif /* __BACKPORT_SKBUFF_H */

package/kernel/mac80211/patches/005-revert-devcoredump.patch

@@ -1,152 +0,0 @@
---- a/compat/Makefile
-+++ b/compat/Makefile
-@@ -35,8 +35,6 @@ compat-$(CPTCFG_KERNEL_4_6) += backport-
- 
- compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o
- compat-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += crypto-skcipher.o
--skcipher-objs += crypto-skcipher.o
--obj-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += skcipher.o
- compat-$(CPTCFG_BPAUTO_BUILD_WANT_DEV_COREDUMP) += drivers-base-devcoredump.o
- compat-$(CPTCFG_BPAUTO_RHASHTABLE) += lib-rhashtable.o
- cordic-objs += lib-cordic.o
---- a/compat/drivers-base-devcoredump.c
-+++ b/compat/drivers-base-devcoredump.c
-@@ -31,6 +31,7 @@
- #include <linux/slab.h>
- #include <linux/fs.h>
- #include <linux/workqueue.h>
-+#include "backports.h"
- 
- static struct class devcd_class;
- 
-@@ -40,6 +41,10 @@ static bool devcd_disabled;
- /* if data isn't read by userspace after 5 minutes then delete it */
- #define DEVCD_TIMEOUT	(HZ * 60 * 5)
- 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)
-+static struct bin_attribute devcd_attr_data;
-+#endif
-+
- struct devcd_entry {
- 	struct device devcd_dev;
- 	void *data;
-@@ -69,8 +74,7 @@ static void devcd_dev_release(struct dev
- 	 * a struct device to know when it goes away?
- 	 */
- 	if (devcd->failing_dev->kobj.sd)
--		sysfs_delete_link(&devcd->failing_dev->kobj, &dev->kobj,
--				  "devcoredump");
-+		sysfs_remove_link(&devcd->failing_dev->kobj, "devcoredump");
- 
- 	put_device(devcd->failing_dev);
- 	kfree(devcd);
-@@ -82,6 +86,9 @@ static void devcd_del(struct work_struct
- 
- 	devcd = container_of(wk, struct devcd_entry, del_wk.work);
- 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)
-+	device_remove_bin_file(&devcd->devcd_dev, &devcd_attr_data);
-+#endif
- 	device_del(&devcd->devcd_dev);
- 	put_device(&devcd->devcd_dev);
- }
-@@ -115,6 +122,7 @@ static struct bin_attribute devcd_attr_d
- 	.write = devcd_data_write,
- };
- 
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0)
- static struct bin_attribute *devcd_dev_bin_attrs[] = {
- 	&devcd_attr_data, NULL,
- };
-@@ -126,6 +134,7 @@ static const struct attribute_group devc
- static const struct attribute_group *devcd_dev_groups[] = {
- 	&devcd_dev_group, NULL,
- };
-+#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0) */
- 
- static int devcd_free(struct device *dev, void *data)
- {
-@@ -160,18 +169,11 @@ static ssize_t disabled_store(struct cla
- 
- 	return count;
- }
--static CLASS_ATTR_RW(disabled);
- 
--static struct attribute *devcd_class_attrs[] = {
--	&class_attr_disabled.attr,
--	NULL,
-+static struct class_attribute devcd_class_attrs[] = {
-+	__ATTR_RW(disabled),
-+	__ATTR_NULL
- };
--#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0)
--ATTRIBUTE_GROUPS(devcd_class);
--#else
--#define BP_ATTR_GRP_STRUCT device_attribute
--ATTRIBUTE_GROUPS_BACKPORT(devcd_class);
--#endif
- 
- static struct class devcd_class = {
- 	.name		= "devcoredump",
-@@ -179,10 +181,8 @@ static struct class devcd_class = {
- 	.dev_release	= devcd_dev_release,
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0)
- 	.dev_groups	= devcd_dev_groups,
--#else
--	.dev_attrs = devcd_class_dev_attrs,
- #endif
--	.class_groups	= devcd_class_groups,
-+	.class_attrs	= devcd_class_attrs,
- };
- 
- static ssize_t devcd_readv(char *buffer, loff_t offset, size_t count,
-@@ -325,6 +325,11 @@ void dev_coredumpm(struct device *dev, s
- 	if (device_add(&devcd->devcd_dev))
- 		goto put_device;
- 
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)
-+	if (device_create_bin_file(&devcd->devcd_dev, &devcd_attr_data))
-+		goto put_device;
-+#endif
-+
- 	if (sysfs_create_link(&devcd->devcd_dev.kobj, &dev->kobj,
- 			      "failing_device"))
- 		/* nothing - symlink will be missing */;
-@@ -367,16 +372,13 @@ void dev_coredumpsg(struct device *dev,
- }
- EXPORT_SYMBOL_GPL(dev_coredumpsg);
- 
--static int __init devcoredump_init(void)
-+int __init devcoredump_init(void)
- {
--	init_devcd_class_attrs();
- 	return class_register(&devcd_class);
- }
--__initcall(devcoredump_init);
- 
--static void __exit devcoredump_exit(void)
-+void __exit devcoredump_exit(void)
- {
- 	class_for_each_device(&devcd_class, NULL, NULL, devcd_free);
- 	class_unregister(&devcd_class);
- }
--__exitcall(devcoredump_exit);
---- a/include/linux/backport-devcoredump.h
-+++ b/include/linux/backport-devcoredump.h
-@@ -66,7 +66,7 @@ static inline void _devcd_free_sgtable(s
- }
- 
- 
--#ifdef CONFIG_DEV_COREDUMP
-+#ifdef CPTCFG_BPAUTO_WANT_DEV_COREDUMP
- void dev_coredumpv(struct device *dev, void *data, size_t datalen,
- 		   gfp_t gfp);
- 
-@@ -100,6 +100,6 @@ static inline void dev_coredumpsg(struct
- {
- 	_devcd_free_sgtable(table);
- }
--#endif /* CONFIG_DEV_COREDUMP */
-+#endif /* CPTCFG_BPAUTO_WANT_DEV_COREDUMP */
- 
- #endif /* __DEVCOREDUMP_H */

package/kernel/mac80211/patches/006-revert-ktime-changes.patch

@@ -1,20 +0,0 @@
---- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
-@@ -177,7 +177,7 @@ static bool rt2800usb_tx_sta_fifo_read_c
- 	if (rt2800usb_txstatus_pending(rt2x00dev)) {
- 		/* Read register after 1 ms */
- 		hrtimer_start(&rt2x00dev->txstatus_timer,
--			      TXSTATUS_READ_INTERVAL,
-+			      ktime_set(0, TXSTATUS_READ_INTERVAL),
- 			      HRTIMER_MODE_REL);
- 		return false;
- 	}
-@@ -204,7 +204,7 @@ static void rt2800usb_async_read_tx_stat
- 
- 	/* Read TX_STA_FIFO register after 2 ms */
- 	hrtimer_start(&rt2x00dev->txstatus_timer,
--		      2 * TXSTATUS_READ_INTERVAL,
-+		      ktime_set(0, 2*TXSTATUS_READ_INTERVAL),
- 		      HRTIMER_MODE_REL);
- }
- 

package/kernel/mac80211/patches/007-revert-genetlink-changes.patch

@@ -1,266 +0,0 @@
---- a/net/wireless/nl80211.c
-+++ b/net/wireless/nl80211.c
-@@ -32,8 +32,22 @@ static int nl80211_crypto_settings(struc
- 				   struct cfg80211_crypto_settings *settings,
- 				   int cipher_limit);
- 
-+static int nl80211_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
-+			    struct genl_info *info);
-+static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
-+			      struct genl_info *info);
-+
- /* the netlink family */
--static struct genl_family nl80211_fam;
-+static struct genl_family nl80211_fam = {
-+	.id = GENL_ID_GENERATE,		/* don't bother with a hardcoded ID */
-+	.name = NL80211_GENL_NAME,	/* have users key off the name instead */
-+	.hdrsize = 0,			/* no private header */
-+	.version = 1,			/* no particular meaning now */
-+	.maxattr = NL80211_ATTR_MAX,
-+	.netnsok = true,
-+	.pre_doit = nl80211_pre_doit,
-+	.post_doit = nl80211_post_doit,
-+};
- 
- /* multicast groups */
- enum nl80211_multicast_groups {
-@@ -549,14 +563,13 @@ static int nl80211_prepare_wdev_dump(str
- 
- 	if (!cb->args[0]) {
- 		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
--				  genl_family_attrbuf(&nl80211_fam),
--				  nl80211_fam.maxattr, nl80211_policy);
-+				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
-+				  nl80211_policy);
- 		if (err)
- 			goto out_unlock;
- 
--		*wdev = __cfg80211_wdev_from_attrs(
--					sock_net(skb->sk),
--					genl_family_attrbuf(&nl80211_fam));
-+		*wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk),
-+						   nl80211_fam.attrbuf);
- 		if (IS_ERR(*wdev)) {
- 			err = PTR_ERR(*wdev);
- 			goto out_unlock;
-@@ -1903,7 +1916,7 @@ static int nl80211_dump_wiphy_parse(stru
- 				    struct netlink_callback *cb,
- 				    struct nl80211_dump_wiphy_state *state)
- {
--	struct nlattr **tb = genl_family_attrbuf(&nl80211_fam);
-+	struct nlattr **tb = nl80211_fam.attrbuf;
- 	int ret = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
- 			      tb, nl80211_fam.maxattr, nl80211_policy);
- 	/* ignore parse errors for backward compatibility */
-@@ -7733,7 +7746,6 @@ static int nl80211_send_survey(struct sk
- 
- static int nl80211_dump_survey(struct sk_buff *skb, struct netlink_callback *cb)
- {
--	struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
- 	struct survey_info survey;
- 	struct cfg80211_registered_device *rdev;
- 	struct wireless_dev *wdev;
-@@ -7746,7 +7758,7 @@ static int nl80211_dump_survey(struct sk
- 		return res;
- 
- 	/* prepare_wdev_dump parsed the attributes */
--	radio_stats = attrbuf[NL80211_ATTR_SURVEY_RADIO_STATS];
-+	radio_stats = nl80211_fam.attrbuf[NL80211_ATTR_SURVEY_RADIO_STATS];
- 
- 	if (!wdev->netdev) {
- 		res = -EINVAL;
-@@ -8594,14 +8606,14 @@ static int nl80211_testmode_dump(struct
- 		 */
- 		phy_idx = cb->args[0] - 1;
- 	} else {
--		struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
--
- 		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
--				  attrbuf, nl80211_fam.maxattr, nl80211_policy);
-+				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
-+				  nl80211_policy);
- 		if (err)
- 			goto out_err;
- 
--		rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), attrbuf);
-+		rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk),
-+						  nl80211_fam.attrbuf);
- 		if (IS_ERR(rdev)) {
- 			err = PTR_ERR(rdev);
- 			goto out_err;
-@@ -8609,8 +8621,9 @@ static int nl80211_testmode_dump(struct
- 		phy_idx = rdev->wiphy_idx;
- 		rdev = NULL;
- 
--		if (attrbuf[NL80211_ATTR_TESTDATA])
--			cb->args[1] = (long)attrbuf[NL80211_ATTR_TESTDATA];
-+		if (nl80211_fam.attrbuf[NL80211_ATTR_TESTDATA])
-+			cb->args[1] =
-+				(long)nl80211_fam.attrbuf[NL80211_ATTR_TESTDATA];
- 	}
- 
- 	if (cb->args[1]) {
-@@ -10814,7 +10827,8 @@ static int handle_nan_filter(struct nlat
- 
- 	i = 0;
- 	nla_for_each_nested(attr, attr_filter, rem) {
--		filter[i].filter = nla_memdup(attr, GFP_KERNEL);
-+		filter[i].filter = kmemdup(nla_data(attr), nla_len(attr),
-+					   GFP_KERNEL);
- 		filter[i].len = nla_len(attr);
- 		i++;
- 	}
-@@ -11450,7 +11464,6 @@ static int nl80211_prepare_vendor_dump(s
- 				       struct cfg80211_registered_device **rdev,
- 				       struct wireless_dev **wdev)
- {
--	struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam);
- 	u32 vid, subcmd;
- 	unsigned int i;
- 	int vcmd_idx = -1;
-@@ -11486,28 +11499,31 @@ static int nl80211_prepare_vendor_dump(s
- 	}
- 
- 	err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
--			  attrbuf, nl80211_fam.maxattr, nl80211_policy);
-+			  nl80211_fam.attrbuf, nl80211_fam.maxattr,
-+			  nl80211_policy);
- 	if (err)
- 		goto out_unlock;
- 
--	if (!attrbuf[NL80211_ATTR_VENDOR_ID] ||
--	    !attrbuf[NL80211_ATTR_VENDOR_SUBCMD]) {
-+	if (!nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_ID] ||
-+	    !nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_SUBCMD]) {
- 		err = -EINVAL;
- 		goto out_unlock;
- 	}
- 
--	*wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk), attrbuf);
-+	*wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk),
-+					   nl80211_fam.attrbuf);
- 	if (IS_ERR(*wdev))
- 		*wdev = NULL;
- 
--	*rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), attrbuf);
-+	*rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk),
-+					   nl80211_fam.attrbuf);
- 	if (IS_ERR(*rdev)) {
- 		err = PTR_ERR(*rdev);
- 		goto out_unlock;
- 	}
- 
--	vid = nla_get_u32(attrbuf[NL80211_ATTR_VENDOR_ID]);
--	subcmd = nla_get_u32(attrbuf[NL80211_ATTR_VENDOR_SUBCMD]);
-+	vid = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_ID]);
-+	subcmd = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_SUBCMD]);
- 
- 	for (i = 0; i < (*rdev)->wiphy.n_vendor_commands; i++) {
- 		const struct wiphy_vendor_command *vcmd;
-@@ -11531,9 +11547,9 @@ static int nl80211_prepare_vendor_dump(s
- 		goto out_unlock;
- 	}
- 
--	if (attrbuf[NL80211_ATTR_VENDOR_DATA]) {
--		data = nla_data(attrbuf[NL80211_ATTR_VENDOR_DATA]);
--		data_len = nla_len(attrbuf[NL80211_ATTR_VENDOR_DATA]);
-+	if (nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]) {
-+		data = nla_data(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]);
-+		data_len = nla_len(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]);
- 	}
- 
- 	/* 0 is the first index - add 1 to parse only once */
-@@ -12795,21 +12811,6 @@ static __genl_const struct genl_ops nl80
- 	},
- };
- 
--static struct genl_family nl80211_fam __ro_after_init = {
--	.name = NL80211_GENL_NAME,	/* have users key off the name instead */
--	.hdrsize = 0,			/* no private header */
--	.version = 1,			/* no particular meaning now */
--	.maxattr = NL80211_ATTR_MAX,
--	.netnsok = true,
--	.pre_doit = nl80211_pre_doit,
--	.post_doit = nl80211_post_doit,
--	.module = THIS_MODULE,
--	.ops = nl80211_ops,
--	.n_ops = ARRAY_SIZE(nl80211_ops),
--	.mcgrps = nl80211_mcgrps,
--	.n_mcgrps = ARRAY_SIZE(nl80211_mcgrps),
--};
--
- /* notification functions */
- 
- void nl80211_notify_wiphy(struct cfg80211_registered_device *rdev,
-@@ -14759,11 +14760,12 @@ void nl80211_send_ap_stopped(struct wire
- 
- /* initialisation/exit functions */
- 
--int __init nl80211_init(void)
-+int nl80211_init(void)
- {
- 	int err;
- 
--	err = genl_register_family(&nl80211_fam);
-+	err = genl_register_family_with_ops_groups(&nl80211_fam, nl80211_ops,
-+						   nl80211_mcgrps);
- 	if (err)
- 		return err;
- 
---- a/drivers/net/wireless/mac80211_hwsim.c
-+++ b/drivers/net/wireless/mac80211_hwsim.c
-@@ -587,8 +587,15 @@ struct hwsim_radiotap_ack_hdr {
- 	__le16 rt_chbitmask;
- } __packed;
- 
--/* MAC80211_HWSIM netlink family */
--static struct genl_family hwsim_genl_family;
-+/* MAC80211_HWSIM netlinf family */
-+static struct genl_family hwsim_genl_family = {
-+	.id = GENL_ID_GENERATE,
-+	.hdrsize = 0,
-+	.name = "MAC80211_HWSIM",
-+	.version = 1,
-+	.maxattr = HWSIM_ATTR_MAX,
-+	.netnsok = true,
-+};
- 
- enum hwsim_multicast_groups {
- 	HWSIM_MCGRP_CONFIG,
-@@ -3250,18 +3257,6 @@ static __genl_const struct genl_ops hwsi
- 	},
- };
- 
--static struct genl_family hwsim_genl_family __ro_after_init = {
--	.name = "MAC80211_HWSIM",
--	.version = 1,
--	.maxattr = HWSIM_ATTR_MAX,
--	.netnsok = true,
--	.module = THIS_MODULE,
--	.ops = hwsim_ops,
--	.n_ops = ARRAY_SIZE(hwsim_ops),
--	.mcgrps = hwsim_mcgrps,
--	.n_mcgrps = ARRAY_SIZE(hwsim_mcgrps),
--};
--
- static void destroy_radio(struct work_struct *work)
- {
- 	struct mac80211_hwsim_data *data =
-@@ -3309,13 +3304,15 @@ static struct notifier_block hwsim_netli
- 	.notifier_call = mac80211_hwsim_netlink_notify,
- };
- 
--static int __init hwsim_init_netlink(void)
-+static int hwsim_init_netlink(void)
- {
- 	int rc;
- 
- 	printk(KERN_INFO "mac80211_hwsim: initializing netlink\n");
- 
--	rc = genl_register_family(&hwsim_genl_family);
-+	rc = genl_register_family_with_ops_groups(&hwsim_genl_family,
-+						  hwsim_ops,
-+						  hwsim_mcgrps);
- 	if (rc)
- 		goto failure;
- 

package/kernel/mac80211/patches/008-revert-ndo_stats64-cleanup.patch

@@ -1,20 +0,0 @@
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -1133,7 +1133,7 @@ static u16 ieee80211_netdev_select_queue
- 	return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
- }
- 
--static void
-+static struct rtnl_link_stats64 *
- ieee80211_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
- {
- 	int i;
-@@ -1158,6 +1158,8 @@ ieee80211_get_stats64(struct net_device
- 		stats->rx_bytes   += rx_bytes;
- 		stats->tx_bytes   += tx_bytes;
- 	}
-+
-+	return stats;
- }
- 
- static const struct net_device_ops ieee80211_dataif_ops = {

package/kernel/mac80211/patches/009-revert-mtu-changes.patch

@@ -1,338 +0,0 @@
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -151,6 +151,15 @@ void ieee80211_recalc_idle(struct ieee80
- 		ieee80211_hw_config(local, change);
- }
- 
-+static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+	if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN)
-+		return -EINVAL;
-+
-+	dev->mtu = new_mtu;
-+	return 0;
-+}
-+
- static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr,
- 				bool check_dup)
- {
-@@ -1168,6 +1177,7 @@ static const struct net_device_ops ieee8
- 	.ndo_uninit		= ieee80211_uninit,
- 	.ndo_start_xmit		= ieee80211_subif_start_xmit,
- 	.ndo_set_rx_mode	= ieee80211_set_multicast_list,
-+	.ndo_change_mtu 	= ieee80211_change_mtu,
- 	.ndo_set_mac_address 	= ieee80211_change_mac,
- 	.ndo_select_queue	= ieee80211_netdev_select_queue,
- 	.ndo_get_stats64	= ieee80211_get_stats64,
-@@ -1211,6 +1221,7 @@ static const struct net_device_ops ieee8
- 	.ndo_uninit		= ieee80211_uninit,
- 	.ndo_start_xmit		= ieee80211_monitor_start_xmit,
- 	.ndo_set_rx_mode	= ieee80211_set_multicast_list,
-+	.ndo_change_mtu 	= ieee80211_change_mtu,
- 	.ndo_set_mac_address 	= ieee80211_change_mac,
- 	.ndo_select_queue	= ieee80211_monitor_select_queue,
- 	.ndo_get_stats64	= ieee80211_get_stats64,
-@@ -1919,10 +1930,6 @@ int ieee80211_if_add(struct ieee80211_lo
- 
- 		netdev_set_default_ethtool_ops(ndev, &ieee80211_ethtool_ops);
- 
--		/* MTU range: 256 - 2304 */
--		ndev->min_mtu = 256;
--		ndev->max_mtu = IEEE80211_MAX_DATA_LEN;
--
- 		ret = register_netdevice(ndev);
- 		if (ret) {
- 			ieee80211_if_free(ndev);
---- a/drivers/net/wireless/ath/wil6210/netdev.c
-+++ b/drivers/net/wireless/ath/wil6210/netdev.c
-@@ -42,6 +42,21 @@ static int wil_stop(struct net_device *n
- 	return wil_down(wil);
- }
- 
-+static int wil_change_mtu(struct net_device *ndev, int new_mtu)
-+{
-+	struct wil6210_priv *wil = ndev_to_wil(ndev);
-+
-+	if (new_mtu < 68 || new_mtu > mtu_max) {
-+		wil_err(wil, "invalid MTU %d\n", new_mtu);
-+		return -EINVAL;
-+	}
-+
-+	wil_dbg_misc(wil, "change MTU %d -> %d\n", ndev->mtu, new_mtu);
-+	ndev->mtu = new_mtu;
-+
-+	return 0;
-+}
-+
- static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
- {
- 	struct wil6210_priv *wil = ndev_to_wil(ndev);
-@@ -55,6 +70,7 @@ static const struct net_device_ops wil_n
- 	.ndo_start_xmit		= wil_start_xmit,
- 	.ndo_set_mac_address	= eth_mac_addr,
- 	.ndo_validate_addr	= eth_validate_addr,
-+	.ndo_change_mtu		= wil_change_mtu,
- 	.ndo_do_ioctl		= wil_do_ioctl,
- };
- 
-@@ -111,7 +127,6 @@ static int wil6210_netdev_poll_tx(struct
- static void wil_dev_setup(struct net_device *dev)
- {
- 	ether_setup(dev);
--	dev->max_mtu = mtu_max;
- 	dev->tx_queue_len = WIL_TX_Q_LEN_DEFAULT;
- }
- 
---- a/drivers/net/wireless/atmel/atmel.c
-+++ b/drivers/net/wireless/atmel/atmel.c
-@@ -1295,6 +1295,14 @@ static struct iw_statistics *atmel_get_w
- 	return &priv->wstats;
- }
- 
-+static int atmel_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+	if ((new_mtu < 68) || (new_mtu > 2312))
-+		return -EINVAL;
-+	dev->mtu = new_mtu;
-+	return 0;
-+}
-+
- static int atmel_set_mac_address(struct net_device *dev, void *p)
- {
- 	struct sockaddr *addr = p;
-@@ -1498,6 +1506,7 @@ static const struct file_operations atme
- static const struct net_device_ops atmel_netdev_ops = {
- 	.ndo_open 		= atmel_open,
- 	.ndo_stop		= atmel_close,
-+	.ndo_change_mtu 	= atmel_change_mtu,
- 	.ndo_set_mac_address 	= atmel_set_mac_address,
- 	.ndo_start_xmit 	= start_tx,
- 	.ndo_do_ioctl 		= atmel_ioctl,
-@@ -1591,10 +1600,6 @@ struct net_device *init_atmel_card(unsig
- 	dev->irq = irq;
- 	dev->base_addr = port;
- 
--	/* MTU range: 68 - 2312 */
--	dev->min_mtu = 68;
--	dev->max_mtu = MAX_WIRELESS_BODY - ETH_FCS_LEN;
--
- 	SET_NETDEV_DEV(dev, sys_dev);
- 
- 	if ((rc = request_irq(dev->irq, service_interrupt, IRQF_SHARED, dev->name, dev))) {
---- a/drivers/net/wireless/cisco/airo.c
-+++ b/drivers/net/wireless/cisco/airo.c
-@@ -2329,6 +2329,14 @@ static int airo_set_mac_address(struct n
- 	return 0;
- }
- 
-+static int airo_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+	if ((new_mtu < 68) || (new_mtu > 2400))
-+		return -EINVAL;
-+	dev->mtu = new_mtu;
-+	return 0;
-+}
-+
- static LIST_HEAD(airo_devices);
- 
- static void add_airo_dev(struct airo_info *ai)
-@@ -2648,6 +2656,7 @@ static const struct net_device_ops airo1
- 	.ndo_get_stats 		= airo_get_stats,
- 	.ndo_set_mac_address	= airo_set_mac_address,
- 	.ndo_do_ioctl		= airo_ioctl,
-+	.ndo_change_mtu		= airo_change_mtu,
- };
- 
- static void wifi_setup(struct net_device *dev)
-@@ -2659,8 +2668,6 @@ static void wifi_setup(struct net_device
- 	dev->type               = ARPHRD_IEEE80211;
- 	dev->hard_header_len    = ETH_HLEN;
- 	dev->mtu                = AIRO_DEF_MTU;
--	dev->min_mtu            = 68;
--	dev->max_mtu            = MIC_MSGLEN_MAX;
- 	dev->addr_len           = ETH_ALEN;
- 	dev->tx_queue_len       = 100; 
- 
-@@ -2747,6 +2754,7 @@ static const struct net_device_ops airo_
- 	.ndo_set_rx_mode	= airo_set_multicast_list,
- 	.ndo_set_mac_address	= airo_set_mac_address,
- 	.ndo_do_ioctl		= airo_ioctl,
-+	.ndo_change_mtu		= airo_change_mtu,
- 	.ndo_validate_addr	= eth_validate_addr,
- };
- 
-@@ -2758,6 +2766,7 @@ static const struct net_device_ops mpi_n
- 	.ndo_set_rx_mode	= airo_set_multicast_list,
- 	.ndo_set_mac_address	= airo_set_mac_address,
- 	.ndo_do_ioctl		= airo_ioctl,
-+	.ndo_change_mtu		= airo_change_mtu,
- 	.ndo_validate_addr	= eth_validate_addr,
- };
- 
-@@ -2813,7 +2822,6 @@ static struct net_device *_init_airo_car
- 	dev->irq = irq;
- 	dev->base_addr = port;
- 	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
--	dev->max_mtu = MIC_MSGLEN_MAX;
- 
- 	SET_NETDEV_DEV(dev, dmdev);
- 
---- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c
-+++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c
-@@ -6039,6 +6039,7 @@ static const struct net_device_ops ipw21
- 	.ndo_open		= ipw2100_open,
- 	.ndo_stop		= ipw2100_close,
- 	.ndo_start_xmit		= libipw_xmit,
-+	.ndo_change_mtu		= libipw_change_mtu,
- 	.ndo_tx_timeout		= ipw2100_tx_timeout,
- 	.ndo_set_mac_address	= ipw2100_set_address,
- 	.ndo_validate_addr	= eth_validate_addr,
-@@ -6074,8 +6075,6 @@ static struct net_device *ipw2100_alloc_
- 	dev->wireless_data = &priv->wireless_data;
- 	dev->watchdog_timeo = 3 * HZ;
- 	dev->irq = 0;
--	dev->min_mtu = 68;
--	dev->max_mtu = LIBIPW_DATA_LEN;
- 
- 	/* NOTE: We don't use the wireless_handlers hook
- 	 * in dev as the system will start throwing WX requests
---- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c
-+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c
-@@ -11561,6 +11561,7 @@ static const struct net_device_ops ipw_p
- 	.ndo_open 		= ipw_prom_open,
- 	.ndo_stop		= ipw_prom_stop,
- 	.ndo_start_xmit		= ipw_prom_hard_start_xmit,
-+	.ndo_change_mtu		= libipw_change_mtu,
- 	.ndo_set_mac_address 	= eth_mac_addr,
- 	.ndo_validate_addr	= eth_validate_addr,
- };
-@@ -11586,9 +11587,6 @@ static int ipw_prom_alloc(struct ipw_pri
- 	priv->prom_net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
- 	priv->prom_net_dev->netdev_ops = &ipw_prom_netdev_ops;
- 
--	priv->prom_net_dev->min_mtu = 68;
--	priv->prom_net_dev->max_mtu = LIBIPW_DATA_LEN;
--
- 	priv->prom_priv->ieee->iw_mode = IW_MODE_MONITOR;
- 	SET_NETDEV_DEV(priv->prom_net_dev, &priv->pci_dev->dev);
- 
-@@ -11621,6 +11619,7 @@ static const struct net_device_ops ipw_n
- 	.ndo_set_rx_mode	= ipw_net_set_multicast_list,
- 	.ndo_set_mac_address	= ipw_net_set_mac_address,
- 	.ndo_start_xmit		= libipw_xmit,
-+	.ndo_change_mtu		= libipw_change_mtu,
- 	.ndo_validate_addr	= eth_validate_addr,
- };
- 
-@@ -11730,9 +11729,6 @@ static int ipw_pci_probe(struct pci_dev
- 	net_dev->wireless_handlers = &ipw_wx_handler_def;
- 	net_dev->ethtool_ops = &ipw_ethtool_ops;
- 
--	net_dev->min_mtu = 68;
--	net_dev->max_mtu = LIBIPW_DATA_LEN;
--
- 	err = sysfs_create_group(&pdev->dev.kobj, &ipw_attribute_group);
- 	if (err) {
- 		IPW_ERROR("failed to create sysfs device attributes\n");
---- a/drivers/net/wireless/intel/ipw2x00/libipw.h
-+++ b/drivers/net/wireless/intel/ipw2x00/libipw.h
-@@ -948,6 +948,7 @@ static inline int libipw_is_cck_rate(u8
- /* libipw.c */
- void free_libipw(struct net_device *dev, int monitor);
- struct net_device *alloc_libipw(int sizeof_priv, int monitor);
-+int libipw_change_mtu(struct net_device *dev, int new_mtu);
- 
- void libipw_networks_age(struct libipw_device *ieee, unsigned long age_secs);
- 
---- a/drivers/net/wireless/intel/ipw2x00/libipw_module.c
-+++ b/drivers/net/wireless/intel/ipw2x00/libipw_module.c
-@@ -118,6 +118,15 @@ static void libipw_networks_initialize(s
- 			      &ieee->network_free_list);
- }
- 
-+int libipw_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+	if ((new_mtu < 68) || (new_mtu > LIBIPW_DATA_LEN))
-+		return -EINVAL;
-+	dev->mtu = new_mtu;
-+	return 0;
-+}
-+EXPORT_SYMBOL(libipw_change_mtu);
-+
- struct net_device *alloc_libipw(int sizeof_priv, int monitor)
- {
- 	struct libipw_device *ieee;
---- a/drivers/net/wireless/intersil/hostap/hostap_main.c
-+++ b/drivers/net/wireless/intersil/hostap/hostap_main.c
-@@ -765,6 +765,16 @@ static void hostap_set_multicast_list(st
- }
- 
- 
-+static int prism2_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+	if (new_mtu < PRISM2_MIN_MTU || new_mtu > PRISM2_MAX_MTU)
-+		return -EINVAL;
-+
-+	dev->mtu = new_mtu;
-+	return 0;
-+}
-+
-+
- static void prism2_tx_timeout(struct net_device *dev)
- {
- 	struct hostap_interface *iface;
-@@ -803,6 +813,7 @@ static const struct net_device_ops hosta
- 	.ndo_do_ioctl		= hostap_ioctl,
- 	.ndo_set_mac_address	= prism2_set_mac_address,
- 	.ndo_set_rx_mode	= hostap_set_multicast_list,
-+	.ndo_change_mtu 	= prism2_change_mtu,
- 	.ndo_tx_timeout 	= prism2_tx_timeout,
- 	.ndo_validate_addr	= eth_validate_addr,
- };
-@@ -815,6 +826,7 @@ static const struct net_device_ops hosta
- 	.ndo_do_ioctl		= hostap_ioctl,
- 	.ndo_set_mac_address	= prism2_set_mac_address,
- 	.ndo_set_rx_mode	= hostap_set_multicast_list,
-+	.ndo_change_mtu 	= prism2_change_mtu,
- 	.ndo_tx_timeout 	= prism2_tx_timeout,
- 	.ndo_validate_addr	= eth_validate_addr,
- };
-@@ -827,6 +839,7 @@ static const struct net_device_ops hosta
- 	.ndo_do_ioctl		= hostap_ioctl,
- 	.ndo_set_mac_address	= prism2_set_mac_address,
- 	.ndo_set_rx_mode	= hostap_set_multicast_list,
-+	.ndo_change_mtu 	= prism2_change_mtu,
- 	.ndo_tx_timeout 	= prism2_tx_timeout,
- 	.ndo_validate_addr	= eth_validate_addr,
- };
-@@ -838,8 +851,6 @@ void hostap_setup_dev(struct net_device
- 
- 	iface = netdev_priv(dev);
- 	ether_setup(dev);
--	dev->min_mtu = PRISM2_MIN_MTU;
--	dev->max_mtu = PRISM2_MAX_MTU;
- 	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
- 
- 	/* kernel callbacks */
---- a/drivers/net/wireless/intersil/orinoco/main.c
-+++ b/drivers/net/wireless/intersil/orinoco/main.c
-@@ -322,6 +322,9 @@ int orinoco_change_mtu(struct net_device
- {
- 	struct orinoco_private *priv = ndev_priv(dev);
- 
-+	if ((new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU))
-+		return -EINVAL;
-+
- 	/* MTU + encapsulation + header length */
- 	if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) >
- 	     (priv->nicbuf_size - ETH_HLEN))
-@@ -2285,9 +2288,6 @@ int orinoco_if_add(struct orinoco_privat
- 	dev->base_addr = base_addr;
- 	dev->irq = irq;
- 
--	dev->min_mtu = ORINOCO_MIN_MTU;
--	dev->max_mtu = ORINOCO_MAX_MTU;
--
- 	SET_NETDEV_DEV(dev, priv->dev);
- 	ret = register_netdev(dev);
- 	if (ret)

package/kernel/mac80211/patches/011-backport_strscpy.patch

@@ -1,43 +0,0 @@
---- a/backport-include/linux/string.h
-+++ b/backport-include/linux/string.h
-@@ -25,4 +25,8 @@ extern void *memdup_user_nul(const void
- void memzero_explicit(void *s, size_t count);
- #endif
- 
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(4,3,0))
-+ssize_t strscpy(char *dest, const char *src, size_t count);
-+#endif
-+
- #endif /* __BACKPORT_LINUX_STRING_H */
---- a/compat/backport-4.3.c
-+++ b/compat/backport-4.3.c
-@@ -57,3 +57,29 @@ void seq_hex_dump(struct seq_file *m, co
- 	}
- }
- EXPORT_SYMBOL_GPL(seq_hex_dump);
-+
-+ssize_t strscpy(char *dest, const char *src, size_t count)
-+{
-+	long res = 0;
-+
-+	if (count == 0)
-+		return -E2BIG;
-+
-+	while (count) {
-+		char c;
-+
-+		c = src[res];
-+		dest[res] = c;
-+		if (!c)
-+			return res;
-+		res++;
-+		count--;
-+	}
-+
-+	/* Hit buffer length without finding a NUL; force NUL-termination. */
-+	if (res)
-+		dest[res-1] = '\0';
-+
-+	return -E2BIG;
-+}
-+EXPORT_SYMBOL_GPL(strscpy);

package/kernel/mac80211/patches/020-01-rt2x00-avoid-introducing-a-USB-dependency-in-the-rt2.patch

@@ -1,85 +0,0 @@
-From 6232c17438ed01f43665197db5a98a4a4f77ef47 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Thu, 2 Feb 2017 10:57:40 +0100
-Subject: [PATCH 01/19] rt2x00: avoid introducing a USB dependency in the
- rt2x00lib module
-
-As reported by Felix:
-
-Though protected by an ifdef, introducing an usb symbol dependency in
-the rt2x00lib module is a major inconvenience for distributions that
-package kernel modules split into individual packages.
-
-Get rid of this unnecessary dependency by calling the usb related
-function from a more suitable place.
-
-Cc: Vishal Thanki <vishalthanki@gmail.com>
-Reported-by: Felix Fietkau <nbd@nbd.name>
-Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 23 ++++++++---------------
- drivers/net/wireless/ralink/rt2x00/rt2x00usb.c |  5 +++++
- 2 files changed, 13 insertions(+), 15 deletions(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-index 8fcbc8dc94c1..4b08007f93f7 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -1436,21 +1436,6 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
- 	cancel_work_sync(&rt2x00dev->intf_work);
- 	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
- 	cancel_work_sync(&rt2x00dev->sleep_work);
--#if IS_ENABLED(CPTCFG_RT2X00_LIB_USB)
--	if (rt2x00_is_usb(rt2x00dev)) {
--		usb_kill_anchored_urbs(rt2x00dev->anchor);
--		hrtimer_cancel(&rt2x00dev->txstatus_timer);
--		cancel_work_sync(&rt2x00dev->rxdone_work);
--		cancel_work_sync(&rt2x00dev->txdone_work);
--	}
--#endif
--	if (rt2x00dev->workqueue)
--		destroy_workqueue(rt2x00dev->workqueue);
--
--	/*
--	 * Free the tx status fifo.
--	 */
--	kfifo_free(&rt2x00dev->txstatus_fifo);
- 
- 	/*
- 	 * Kill the tx status tasklet.
-@@ -1466,6 +1451,14 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
- 	 */
- 	rt2x00lib_uninitialize(rt2x00dev);
- 
-+	if (rt2x00dev->workqueue)
-+		destroy_workqueue(rt2x00dev->workqueue);
-+
-+	/*
-+	 * Free the tx status fifo.
-+	 */
-+	kfifo_free(&rt2x00dev->txstatus_fifo);
-+
- 	/*
- 	 * Free extra components
- 	 */
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-index 838ca58d2dd6..5a2bf9f63cd7 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-@@ -744,6 +744,11 @@ void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev)
- {
- 	struct data_queue *queue;
- 
-+	usb_kill_anchored_urbs(rt2x00dev->anchor);
-+	hrtimer_cancel(&rt2x00dev->txstatus_timer);
-+	cancel_work_sync(&rt2x00dev->rxdone_work);
-+	cancel_work_sync(&rt2x00dev->txdone_work);
-+
- 	queue_for_each(rt2x00dev, queue)
- 		rt2x00usb_free_entries(queue);
- }
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-02-rt2x00usb-do-not-anchor-rx-and-tx-urb-s.patch

@@ -1,61 +0,0 @@
-From 93c7018ec16bb83399dd4db61c361a6d6aba0d5a Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 8 Feb 2017 12:18:09 +0100
-Subject: [PATCH 02/19] rt2x00usb: do not anchor rx and tx urb's
-
-We might kill TX or RX urb during rt2x00usb_flush_entry(), what can
-cause anchor list corruption like shown below:
-
-[ 2074.035633] WARNING: CPU: 2 PID: 14480 at lib/list_debug.c:33 __list_add+0xac/0xc0
-[ 2074.035634] list_add corruption. prev->next should be next (ffff88020f362c28), but was dead000000000100. (prev=ffff8801d161bb70).
-<snip>
-[ 2074.035670] Call Trace:
-[ 2074.035672]  [<ffffffff813bde47>] dump_stack+0x63/0x8c
-[ 2074.035674]  [<ffffffff810a2231>] __warn+0xd1/0xf0
-[ 2074.035676]  [<ffffffff810a22af>] warn_slowpath_fmt+0x5f/0x80
-[ 2074.035678]  [<ffffffffa073855d>] ? rt2x00usb_register_write_lock+0x3d/0x60 [rt2800usb]
-[ 2074.035679]  [<ffffffff813dbe4c>] __list_add+0xac/0xc0
-[ 2074.035681]  [<ffffffff81591c6c>] usb_anchor_urb+0x4c/0xa0
-[ 2074.035683]  [<ffffffffa07322af>] rt2x00usb_kick_rx_entry+0xaf/0x100 [rt2x00usb]
-[ 2074.035684]  [<ffffffffa0732322>] rt2x00usb_clear_entry+0x22/0x30 [rt2x00usb]
-
-To fix do not anchor TX and RX urb's, it is not needed as during
-shutdown we kill those urbs in rt2x00usb_free_entries().
-
-Cc: Vishal Thanki <vishalthanki@gmail.com>
-Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 4 ----
- 1 file changed, 4 deletions(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-index 5a2bf9f63cd7..fe13dd07cc2a 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-@@ -319,10 +319,8 @@ static bool rt2x00usb_kick_tx_entry(struct queue_entry *entry, void *data)
- 			  entry->skb->data, length,
- 			  rt2x00usb_interrupt_txdone, entry);
- 
--	usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
- 	status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
- 	if (status) {
--		usb_unanchor_urb(entry_priv->urb);
- 		if (status == -ENODEV)
- 			clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
- 		set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
-@@ -410,10 +408,8 @@ static bool rt2x00usb_kick_rx_entry(struct queue_entry *entry, void *data)
- 			  entry->skb->data, entry->skb->len,
- 			  rt2x00usb_interrupt_rxdone, entry);
- 
--	usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
- 	status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
- 	if (status) {
--		usb_unanchor_urb(entry_priv->urb);
- 		if (status == -ENODEV)
- 			clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
- 		set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-03-rt2x00usb-fix-anchor-initialization.patch

@@ -1,75 +0,0 @@
-From 0488a6121dfe6cbd44de15ea3627913b7549a1e9 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 8 Feb 2017 12:18:10 +0100
-Subject: [PATCH 03/19] rt2x00usb: fix anchor initialization
-
-If device fail to initialize we can OOPS in rt2x00lib_remove_dev(), due
-to using uninitialized usb_anchor structure:
-
-[  855.435820] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
-[  855.435826] ieee80211 phy3: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
-[  855.435829] ieee80211 phy3: rt2x00lib_probe_dev: Error - Failed to allocate device
-[  855.435845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
-[  855.435900] IP: _raw_spin_lock_irq+0xd/0x30
-[  855.435926] PGD 0
-[  855.435953] Oops: 0002 [#1] SMP
-<snip>
-[  855.437011] Call Trace:
-[  855.437029]  ? usb_kill_anchored_urbs+0x27/0xc0
-[  855.437061]  rt2x00lib_remove_dev+0x190/0x1c0 [rt2x00lib]
-[  855.437097]  rt2x00lib_probe_dev+0x246/0x7a0 [rt2x00lib]
-[  855.437149]  ? ieee80211_roc_setup+0x9e/0xd0 [mac80211]
-[  855.437183]  ? __kmalloc+0x1af/0x1f0
-[  855.437207]  ? rt2x00usb_probe+0x13d/0xc50 [rt2x00usb]
-[  855.437240]  rt2x00usb_probe+0x155/0xc50 [rt2x00usb]
-[  855.437273]  rt2800usb_probe+0x15/0x20 [rt2800usb]
-[  855.437304]  usb_probe_interface+0x159/0x2d0
-[  855.437333]  driver_probe_device+0x2bb/0x460
-
-Patch changes initialization sequence to fix the problem.
-
-Cc: Vishal Thanki <vishalthanki@gmail.com>
-Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 13 ++++++++-----
- 1 file changed, 8 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-index fe13dd07cc2a..c696f0ad6a68 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
-@@ -825,10 +825,6 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
- 	if (retval)
- 		goto exit_free_device;
- 
--	retval = rt2x00lib_probe_dev(rt2x00dev);
--	if (retval)
--		goto exit_free_reg;
--
- 	rt2x00dev->anchor = devm_kmalloc(&usb_dev->dev,
- 					sizeof(struct usb_anchor),
- 					GFP_KERNEL);
-@@ -836,10 +832,17 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
- 		retval = -ENOMEM;
- 		goto exit_free_reg;
- 	}
--
- 	init_usb_anchor(rt2x00dev->anchor);
-+
-+	retval = rt2x00lib_probe_dev(rt2x00dev);
-+	if (retval)
-+		goto exit_free_anchor;
-+
- 	return 0;
- 
-+exit_free_anchor:
-+	usb_kill_anchored_urbs(rt2x00dev->anchor);
-+
- exit_free_reg:
- 	rt2x00usb_free_reg(rt2x00dev);
- 
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-04-rt61pci-use-entry-directly.patch

@@ -1,28 +0,0 @@
-From 80a97eae304631f57ff8560f87c0b18b95321443 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 8 Feb 2017 13:51:29 +0100
-Subject: [PATCH 04/19] rt61pci: use entry directly
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt61pci.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt61pci.c b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-index 5306a3b2622d..8adb5f3abe15 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-@@ -1903,8 +1903,7 @@ static void rt61pci_write_tx_desc(struct queue_entry *entry,
- 
- 	rt2x00_desc_read(txd, 5, &word);
- 	rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid);
--	rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
--			   skbdesc->entry->entry_idx);
-+	rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx);
- 	rt2x00_set_field32(&word, TXD_W5_TX_POWER,
- 			   TXPOWER_TO_DEV(entry->queue->rt2x00dev->tx_power));
- 	rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-05-rt2x00-call-entry-directly-in-rt2x00_dump_frame.patch

@@ -1,181 +0,0 @@
-From 2ceb813798e1fd33e71a574771828c0f298e077b Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 8 Feb 2017 13:51:30 +0100
-Subject: [PATCH 05/19] rt2x00: call entry directly in rt2x00_dump_frame
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2400pci.c   | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt2500pci.c   | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt2500usb.c   | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c   | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt2x00.h      | 4 ++--
- drivers/net/wireless/ralink/rt2x00/rt2x00debug.c | 7 ++++---
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c   | 4 ++--
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt61pci.c     | 2 +-
- drivers/net/wireless/ralink/rt2x00/rt73usb.c     | 2 +-
- 10 files changed, 15 insertions(+), 14 deletions(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
-index 085c5b423bdf..19874439ac40 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
-@@ -1200,7 +1200,7 @@ static void rt2400pci_write_beacon(struct queue_entry *entry,
- 	/*
- 	 * Dump beacon to userspace through debugfs.
- 	 */
--	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
- out:
- 	/*
- 	 * Enable beaconing again.
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
-index 9832fd50c793..791434de8052 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
-@@ -1349,7 +1349,7 @@ static void rt2500pci_write_beacon(struct queue_entry *entry,
- 	/*
- 	 * Dump beacon to userspace through debugfs.
- 	 */
--	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
- out:
- 	/*
- 	 * Enable beaconing again.
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
-index cd3ab5a9e98d..62357465fe29 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
-@@ -1170,7 +1170,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry,
- 	/*
- 	 * Dump beacon to userspace through debugfs.
- 	 */
--	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
- 
- 	/*
- 	 * USB devices cannot blindly pass the skb->len as the
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-index 572cdea4ca25..8223a1520316 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -1014,7 +1014,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
- 	/*
- 	 * Dump beacon to userspace through debugfs.
- 	 */
--	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
- 
- 	/*
- 	 * Write entire beacon with TXWI and padding to register.
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-index ea299c4e7ada..26869b3bef45 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -1400,11 +1400,11 @@ void rt2x00queue_flush_queues(struct rt2x00_dev *rt2x00dev, bool drop);
-  */
- #ifdef CPTCFG_RT2X00_LIB_DEBUGFS
- void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
--			    enum rt2x00_dump_type type, struct sk_buff *skb);
-+			    enum rt2x00_dump_type type, struct queue_entry *entry);
- #else
- static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
- 					  enum rt2x00_dump_type type,
--					  struct sk_buff *skb)
-+					  struct queue_entry *entry)
- {
- }
- #endif /* CPTCFG_RT2X00_LIB_DEBUGFS */
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-index 72ae530e4a3b..964aefdc11f0 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
-@@ -157,9 +157,10 @@ void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
- }
- 
- void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
--			    enum rt2x00_dump_type type, struct sk_buff *skb)
-+			    enum rt2x00_dump_type type, struct queue_entry *entry)
- {
- 	struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
-+	struct sk_buff *skb = entry->skb;
- 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- 	struct sk_buff *skbcopy;
- 	struct rt2x00dump_hdr *dump_hdr;
-@@ -196,8 +197,8 @@ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
- 	dump_hdr->chip_rf = cpu_to_le16(rt2x00dev->chip.rf);
- 	dump_hdr->chip_rev = cpu_to_le16(rt2x00dev->chip.rev);
- 	dump_hdr->type = cpu_to_le16(type);
--	dump_hdr->queue_index = skbdesc->entry->queue->qid;
--	dump_hdr->entry_index = skbdesc->entry->entry_idx;
-+	dump_hdr->queue_index = entry->queue->qid;
-+	dump_hdr->entry_index = entry->entry_idx;
- 	dump_hdr->timestamp_sec = cpu_to_le32(timestamp.tv_sec);
- 	dump_hdr->timestamp_usec = cpu_to_le32(timestamp.tv_usec);
- 
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-index 4b08007f93f7..dd6678109b7e 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -363,7 +363,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
- 	 * Send frame to debugfs immediately, after this call is completed
- 	 * we are going to overwrite the skb->cb array.
- 	 */
--	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
-+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
- 
- 	/*
- 	 * Determine if the frame has been successfully transmitted and
-@@ -772,7 +772,7 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp)
- 	 */
- 	rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
- 	rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
--	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
-+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry);
- 
- 	/*
- 	 * Initialize RX status information, and send frame
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-index b2364d378774..380daf4e1b8d 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-@@ -544,7 +544,7 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
- 	 * All processing on the frame has been completed, this means
- 	 * it is now ready to be dumped to userspace through debugfs.
- 	 */
--	rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry->skb);
-+	rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry);
- }
- 
- static void rt2x00queue_kick_tx_queue(struct data_queue *queue,
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt61pci.c b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-index 8adb5f3abe15..973d418b8113 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
-@@ -1988,7 +1988,7 @@ static void rt61pci_write_beacon(struct queue_entry *entry,
- 	/*
- 	 * Dump beacon to userspace through debugfs.
- 	 */
--	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
- 
- 	/*
- 	 * Write entire beacon with descriptor and padding to register.
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt73usb.c b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
-index 1a29c4d205a5..bb8d307a789f 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
-@@ -1557,7 +1557,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry,
- 	/*
- 	 * Dump beacon to userspace through debugfs.
- 	 */
--	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
-+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry);
- 
- 	/*
- 	 * Write entire beacon with descriptor and padding to register.
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-06-rt2x00-remove-queue_entry-from-skbdesc.patch

@@ -1,59 +0,0 @@
-From cf81db30a6edcca791b1bfa5348a162471121d11 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 8 Feb 2017 13:51:31 +0100
-Subject: [PATCH 06/19] rt2x00: remove queue_entry from skbdesc
-
-queue_entry field of skbdesc is not read any more, remove it to allow
-skbdesc contain other data.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 3 ---
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 2 --
- 2 files changed, 5 deletions(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-index 380daf4e1b8d..e1660b92b20c 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c
-@@ -83,7 +83,6 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp)
- 	 */
- 	skbdesc = get_skb_frame_desc(skb);
- 	memset(skbdesc, 0, sizeof(*skbdesc));
--	skbdesc->entry = entry;
- 
- 	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA)) {
- 		dma_addr_t skb_dma;
-@@ -689,7 +688,6 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
- 		goto out;
- 	}
- 
--	skbdesc->entry = entry;
- 	entry->skb = skb;
- 
- 	/*
-@@ -774,7 +772,6 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
- 	 */
- 	skbdesc = get_skb_frame_desc(intf->beacon->skb);
- 	memset(skbdesc, 0, sizeof(*skbdesc));
--	skbdesc->entry = intf->beacon;
- 
- 	/*
- 	 * Send beacon to hardware.
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-index 2233b911a1d7..22d18818e850 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-@@ -116,8 +116,6 @@ struct skb_frame_desc {
- 	__le32 iv[2];
- 
- 	dma_addr_t skb_dma;
--
--	struct queue_entry *entry;
- };
- 
- /**
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-07-rt2500usb-don-t-mark-register-accesses-as-inline.patch

@@ -1,84 +0,0 @@
-From 7272416609126e8910b7f0d0e3dba008aa87830c Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 14 Feb 2017 22:28:33 +0100
-Subject: [PATCH 07/19] rt2500usb: don't mark register accesses as inline
-
-When CONFIG_KASAN is set, we get a rather large stack here:
-
-drivers/net/wireless/ralink/rt2x00/rt2500usb.c: In function 'rt2500usb_set_device_state':
-drivers/net/wireless/ralink/rt2x00/rt2500usb.c:1074:1: error: the frame size of 3032 bytes is larger than 100 bytes [-Werror=frame-larger-than=]
-
-If we don't force those functions to be inline, the compiler can figure this
-out better itself and not inline the functions when doing so would be harmful,
-reducing the stack size to a merge 256 bytes.
-
-Note that there is another problem that manifests in this driver, as a result
-of the typecheck() macro causing even larger stack frames.
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2500usb.c | 19 +++++--------------
- 1 file changed, 5 insertions(+), 14 deletions(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
-index 62357465fe29..0d2670a56c4c 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
-@@ -55,7 +55,7 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-  * If the csr_mutex is already held then the _lock variants must
-  * be used instead.
-  */
--static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
-+static void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
- 					   const unsigned int offset,
- 					   u16 *value)
- {
-@@ -66,7 +66,7 @@ static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
- 	*value = le16_to_cpu(reg);
- }
- 
--static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
-+static void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
- 						const unsigned int offset,
- 						u16 *value)
- {
-@@ -77,16 +77,7 @@ static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
- 	*value = le16_to_cpu(reg);
- }
- 
--static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev,
--						const unsigned int offset,
--						void *value, const u16 length)
--{
--	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
--				      USB_VENDOR_REQUEST_IN, offset,
--				      value, length);
--}
--
--static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
-+static void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
- 					    const unsigned int offset,
- 					    u16 value)
- {
-@@ -96,7 +87,7 @@ static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
- 				      &reg, sizeof(reg));
- }
- 
--static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
-+static void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
- 						 const unsigned int offset,
- 						 u16 value)
- {
-@@ -106,7 +97,7 @@ static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
- 				       &reg, sizeof(reg), REGISTER_TIMEOUT);
- }
- 
--static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
-+static void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
- 						 const unsigned int offset,
- 						 void *value, const u16 length)
- {
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-08-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch

@@ -1,94 +0,0 @@
-From 96609f366c6f792421e1939c5c834abbe24eb88a Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 15 Feb 2017 10:25:04 +0100
-Subject: [PATCH 08/19] rt2x00: rt2800lib: move rt2800_drv_data declaration
- into rt2800lib.h
-
-The rt2800_drv_data structure contains driver specific
-information. Move the declaration into the rt2800lib.h
-header which is a more logical place for it. Also fix
-the comment style to avoid checkpatch warning.
-
-The patch contains no functional changes, it is in
-preparation for the next patch.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800.h    | 25 -------------------------
- drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 23 +++++++++++++++++++++++
- 2 files changed, 23 insertions(+), 25 deletions(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800.h b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-index 256496bfbafb..0e7051d8132f 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
-@@ -2987,29 +2987,4 @@ enum rt2800_eeprom_word {
-  */
- #define BCN_TBTT_OFFSET 64
- 
--/*
-- * Hardware has 255 WCID table entries. First 32 entries are reserved for
-- * shared keys. Since parts of the pairwise key table might be shared with
-- * the beacon frame buffers 6 & 7 we could only use the first 222 entries.
-- */
--#define WCID_START	33
--#define WCID_END	222
--#define STA_IDS_SIZE	(WCID_END - WCID_START + 2)
--
--/*
-- * RT2800 driver data structure
-- */
--struct rt2800_drv_data {
--	u8 calibration_bw20;
--	u8 calibration_bw40;
--	u8 bbp25;
--	u8 bbp26;
--	u8 txmixer_gain_24g;
--	u8 txmixer_gain_5g;
--	u8 max_psdu;
--	unsigned int tbtt_tick;
--	unsigned int ampdu_factor_cnt[4];
--	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
--};
--
- #endif /* RT2800_H */
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-index 0a8b4df665fe..8e1ae138c3f1 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -20,6 +20,29 @@
- #ifndef RT2800LIB_H
- #define RT2800LIB_H
- 
-+/*
-+ * Hardware has 255 WCID table entries. First 32 entries are reserved for
-+ * shared keys. Since parts of the pairwise key table might be shared with
-+ * the beacon frame buffers 6 & 7 we could only use the first 222 entries.
-+ */
-+#define WCID_START	33
-+#define WCID_END	222
-+#define STA_IDS_SIZE	(WCID_END - WCID_START + 2)
-+
-+/* RT2800 driver data structure */
-+struct rt2800_drv_data {
-+	u8 calibration_bw20;
-+	u8 calibration_bw40;
-+	u8 bbp25;
-+	u8 bbp26;
-+	u8 txmixer_gain_24g;
-+	u8 txmixer_gain_5g;
-+	u8 max_psdu;
-+	unsigned int tbtt_tick;
-+	unsigned int ampdu_factor_cnt[4];
-+	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
-+};
-+
- struct rt2800_ops {
- 	void (*register_read)(struct rt2x00_dev *rt2x00dev,
- 			      const unsigned int offset, u32 *value);
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-09-rt2800-identify-station-based-on-status-WCID.patch

@@ -1,94 +0,0 @@
-From a13d985f26f6df07d5c5c0e190477628e236babc Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 15 Feb 2017 10:25:05 +0100
-Subject: [PATCH 09/19] rt2800: identify station based on status WCID
-
-Add framework to identify sta based on tx status WCID. This is currently
-not used, will start be utilized in the future patch.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c   | 5 +++++
- drivers/net/wireless/ralink/rt2x00/rt2800lib.h   | 1 +
- drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 3 ++-
- 3 files changed, 8 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-index 8223a1520316..46405cce35e0 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -855,11 +855,13 @@ EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
- void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
- {
- 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
- 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
- 	struct txdone_entry_desc txdesc;
- 	u32 word;
- 	u16 mcs, real_mcs;
- 	int aggr, ampdu;
-+	int wcid;
- 
- 	/*
- 	 * Obtain the status about this packet.
-@@ -872,6 +874,7 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
- 
- 	real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
- 	aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
-+	wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID);
- 
- 	/*
- 	 * If a frame was meant to be sent as a single non-aggregated MPDU
-@@ -1468,6 +1471,7 @@ int rt2800_sta_add(struct rt2x00_dev *rt2x00dev, struct ieee80211_vif *vif,
- 		return 0;
- 
- 	__set_bit(wcid - WCID_START, drv_data->sta_ids);
-+	drv_data->wcid_to_sta[wcid - WCID_START] = sta;
- 
- 	/*
- 	 * Clean up WCID attributes and write STA address to the device.
-@@ -1498,6 +1502,7 @@ int rt2800_sta_remove(struct rt2x00_dev *rt2x00dev, struct ieee80211_sta *sta)
- 	 * get renewed when the WCID is reused.
- 	 */
- 	rt2800_config_wcid(rt2x00dev, NULL, wcid);
-+	drv_data->wcid_to_sta[wcid - WCID_START] = NULL;
- 	__clear_bit(wcid - WCID_START, drv_data->sta_ids);
- 
- 	return 0;
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-index 8e1ae138c3f1..6811d677a6e7 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
-@@ -41,6 +41,7 @@ struct rt2800_drv_data {
- 	unsigned int tbtt_tick;
- 	unsigned int ampdu_factor_cnt[4];
- 	DECLARE_BITMAP(sta_ids, STA_IDS_SIZE);
-+	struct ieee80211_sta *wcid_to_sta[STA_IDS_SIZE];
- };
- 
- struct rt2800_ops {
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-index 22d18818e850..9b297fce4692 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
-@@ -102,7 +102,7 @@ enum skb_frame_desc_flags {
-  *	of the scope of the skb->data pointer.
-  * @iv: IV/EIV data used during encryption/decryption.
-  * @skb_dma: (PCI-only) the DMA address associated with the sk buffer.
-- * @entry: The entry to which this sk buffer belongs.
-+ * @sta: The station where sk buffer was sent.
-  */
- struct skb_frame_desc {
- 	u8 flags;
-@@ -116,6 +116,7 @@ struct skb_frame_desc {
- 	__le32 iv[2];
- 
- 	dma_addr_t skb_dma;
-+	struct ieee80211_sta *sta;
- };
- 
- /**
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-10-rt2x00-separte-filling-tx-status-from-rt2x00lib_txdo.patch

@@ -1,178 +0,0 @@
-From 5edb05afebba8f488a30db29550e55c42eea6d6a Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 15 Feb 2017 10:25:06 +0100
-Subject: [PATCH 10/19] rt2x00: separte filling tx status from rt2x00lib_txdone
-
-This makes rt2x00lib_txdone a bit simpler and will allow to reuse code
-in different variant of txdone which I'm preparing.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 141 +++++++++++++------------
- 1 file changed, 76 insertions(+), 65 deletions(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-index dd6678109b7e..b5d90fefc96b 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -313,73 +313,14 @@ static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry)
- 	return ret;
- }
- 
--void rt2x00lib_txdone(struct queue_entry *entry,
--		      struct txdone_entry_desc *txdesc)
-+static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
-+				     struct ieee80211_tx_info *tx_info,
-+				     struct skb_frame_desc *skbdesc,
-+				     struct txdone_entry_desc *txdesc,
-+				     bool success)
- {
--	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
--	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
--	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
--	unsigned int header_length, i;
- 	u8 rate_idx, rate_flags, retry_rates;
--	u8 skbdesc_flags = skbdesc->flags;
--	bool success;
--
--	/*
--	 * Unmap the skb.
--	 */
--	rt2x00queue_unmap_skb(entry);
--
--	/*
--	 * Remove the extra tx headroom from the skb.
--	 */
--	skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
--
--	/*
--	 * Signal that the TX descriptor is no longer in the skb.
--	 */
--	skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
--
--	/*
--	 * Determine the length of 802.11 header.
--	 */
--	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
--
--	/*
--	 * Remove L2 padding which was added during
--	 */
--	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
--		rt2x00queue_remove_l2pad(entry->skb, header_length);
--
--	/*
--	 * If the IV/EIV data was stripped from the frame before it was
--	 * passed to the hardware, we should now reinsert it again because
--	 * mac80211 will expect the same data to be present it the
--	 * frame as it was passed to us.
--	 */
--	if (rt2x00_has_cap_hw_crypto(rt2x00dev))
--		rt2x00crypto_tx_insert_iv(entry->skb, header_length);
--
--	/*
--	 * Send frame to debugfs immediately, after this call is completed
--	 * we are going to overwrite the skb->cb array.
--	 */
--	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
--
--	/*
--	 * Determine if the frame has been successfully transmitted and
--	 * remove BARs from our check list while checking for their
--	 * TX status.
--	 */
--	success =
--	    rt2x00lib_txdone_bar_status(entry) ||
--	    test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
--	    test_bit(TXDONE_UNKNOWN, &txdesc->flags);
--
--	/*
--	 * Update TX statistics.
--	 */
--	rt2x00dev->link.qual.tx_success += success;
--	rt2x00dev->link.qual.tx_failed += !success;
-+	int i;
- 
- 	rate_idx = skbdesc->tx_rate_idx;
- 	rate_flags = skbdesc->tx_rate_flags;
-@@ -448,6 +389,76 @@ void rt2x00lib_txdone(struct queue_entry *entry,
- 		else
- 			rt2x00dev->low_level_stats.dot11RTSFailureCount++;
- 	}
-+}
-+
-+void rt2x00lib_txdone(struct queue_entry *entry,
-+		      struct txdone_entry_desc *txdesc)
-+{
-+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
-+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-+	u8 skbdesc_flags = skbdesc->flags;
-+	unsigned int header_length;
-+	bool success;
-+
-+	/*
-+	 * Unmap the skb.
-+	 */
-+	rt2x00queue_unmap_skb(entry);
-+
-+	/*
-+	 * Remove the extra tx headroom from the skb.
-+	 */
-+	skb_pull(entry->skb, rt2x00dev->extra_tx_headroom);
-+
-+	/*
-+	 * Signal that the TX descriptor is no longer in the skb.
-+	 */
-+	skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
-+
-+	/*
-+	 * Determine the length of 802.11 header.
-+	 */
-+	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
-+
-+	/*
-+	 * Remove L2 padding which was added during
-+	 */
-+	if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD))
-+		rt2x00queue_remove_l2pad(entry->skb, header_length);
-+
-+	/*
-+	 * If the IV/EIV data was stripped from the frame before it was
-+	 * passed to the hardware, we should now reinsert it again because
-+	 * mac80211 will expect the same data to be present it the
-+	 * frame as it was passed to us.
-+	 */
-+	if (rt2x00_has_cap_hw_crypto(rt2x00dev))
-+		rt2x00crypto_tx_insert_iv(entry->skb, header_length);
-+
-+	/*
-+	 * Send frame to debugfs immediately, after this call is completed
-+	 * we are going to overwrite the skb->cb array.
-+	 */
-+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
-+
-+	/*
-+	 * Determine if the frame has been successfully transmitted and
-+	 * remove BARs from our check list while checking for their
-+	 * TX status.
-+	 */
-+	success =
-+	    rt2x00lib_txdone_bar_status(entry) ||
-+	    test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
-+	    test_bit(TXDONE_UNKNOWN, &txdesc->flags);
-+
-+	/*
-+	 * Update TX statistics.
-+	 */
-+	rt2x00dev->link.qual.tx_success += success;
-+	rt2x00dev->link.qual.tx_failed += !success;
-+
-+	rt2x00lib_fill_tx_status(rt2x00dev, tx_info, skbdesc, txdesc, success);
- 
- 	/*
- 	 * Only send the status report to mac80211 when it's a frame
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-11-rt2x00-separte-clearing-entry-from-rt2x00lib_txdone.patch

@@ -1,88 +0,0 @@
-From 56646adf9cd60b488ddc5633a2d9aa1f30efa5db Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 15 Feb 2017 10:25:07 +0100
-Subject: [PATCH 11/19] rt2x00: separte clearing entry from rt2x00lib_txdone
-
-This makes rt2x00lib_txdone a bit simpler and will allow to reuse
-code in different variant of txdone which I'm preparing.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 51 +++++++++++++++-----------
- 1 file changed, 29 insertions(+), 22 deletions(-)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-index b5d90fefc96b..03b368ac9cb6 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -391,6 +391,32 @@ static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev,
- 	}
- }
- 
-+static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev,
-+				  struct queue_entry *entry)
-+{
-+	/*
-+	 * Make this entry available for reuse.
-+	 */
-+	entry->skb = NULL;
-+	entry->flags = 0;
-+
-+	rt2x00dev->ops->lib->clear_entry(entry);
-+
-+	rt2x00queue_index_inc(entry, Q_INDEX_DONE);
-+
-+	/*
-+	 * If the data queue was below the threshold before the txdone
-+	 * handler we must make sure the packet queue in the mac80211 stack
-+	 * is reenabled when the txdone handler has finished. This has to be
-+	 * serialized with rt2x00mac_tx(), otherwise we can wake up queue
-+	 * before it was stopped.
-+	 */
-+	spin_lock_bh(&entry->queue->tx_lock);
-+	if (!rt2x00queue_threshold(entry->queue))
-+		rt2x00queue_unpause_queue(entry->queue);
-+	spin_unlock_bh(&entry->queue->tx_lock);
-+}
-+
- void rt2x00lib_txdone(struct queue_entry *entry,
- 		      struct txdone_entry_desc *txdesc)
- {
-@@ -471,30 +497,11 @@ void rt2x00lib_txdone(struct queue_entry *entry,
- 			ieee80211_tx_status(rt2x00dev->hw, entry->skb);
- 		else
- 			ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
--	} else
-+	} else {
- 		dev_kfree_skb_any(entry->skb);
-+	}
- 
--	/*
--	 * Make this entry available for reuse.
--	 */
--	entry->skb = NULL;
--	entry->flags = 0;
--
--	rt2x00dev->ops->lib->clear_entry(entry);
--
--	rt2x00queue_index_inc(entry, Q_INDEX_DONE);
--
--	/*
--	 * If the data queue was below the threshold before the txdone
--	 * handler we must make sure the packet queue in the mac80211 stack
--	 * is reenabled when the txdone handler has finished. This has to be
--	 * serialized with rt2x00mac_tx(), otherwise we can wake up queue
--	 * before it was stopped.
--	 */
--	spin_lock_bh(&entry->queue->tx_lock);
--	if (!rt2x00queue_threshold(entry->queue))
--		rt2x00queue_unpause_queue(entry->queue);
--	spin_unlock_bh(&entry->queue->tx_lock);
-+	rt2x00lib_clear_entry(rt2x00dev, entry);
- }
- EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
- 
--- 
-2.12.1
-

package/kernel/mac80211/patches/020-12-rt2x00-add-txdone-nomatch-function.patch

@@ -1,92 +0,0 @@
-From a09305d052166cb489402a63a5d275e954e0b923 Mon Sep 17 00:00:00 2001
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Wed, 15 Feb 2017 10:25:08 +0100
-Subject: [PATCH 12/19] rt2x00: add txdone nomatch function
-
-This txdone nomatch function will be used when we get status from the HW,
-but we could not match it with any sent skb.
-
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/net/wireless/ralink/rt2x00/rt2x00.h    |  2 ++
- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 50 ++++++++++++++++++++++++++
- 2 files changed, 52 insertions(+)
-
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-index 340787894c69..91ba10fdf732 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
-@@ -1425,6 +1425,8 @@ void rt2x00lib_dmastart(struct queue_entry *entry);
- void rt2x00lib_dmadone(struct queue_entry *entry);
- void rt2x00lib_txdone(struct queue_entry *entry,
- 		      struct txdone_entry_desc *txdesc);
-+void rt2x00lib_txdone_nomatch(struct queue_entry *entry,
-+			      struct txdone_entry_desc *txdesc);
- void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status);
- void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp);
- 
-diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-index 03b368ac9cb6..90fc259fb5bc 100644
---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
-@@ -417,6 +417,56 @@ static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev,
- 	spin_unlock_bh(&entry->queue->tx_lock);
- }
- 
-+void rt2x00lib_txdone_nomatch(struct queue_entry *entry,
-+			      struct txdone_entry_desc *txdesc)
-+{
-+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-+	struct ieee80211_tx_info txinfo = {};
-+	bool success;
-+
-+	/*
-+	 * Unmap the skb.
-+	 */
-+	rt2x00queue_unmap_skb(entry);
-+
-+	/*
-+	 * Signal that the TX descriptor is no longer in the skb.
-+	 */
-+	skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
-+
-+	/*
-+	 * Send frame to debugfs immediately, after this call is completed
-+	 * we are going to overwrite the skb->cb array.
-+	 */
-+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry);
-+
-+	/*
-+	 * Determine if the frame has been successfully transmitted and
-+	 * remove BARs from our check list while checking for their
-+	 * TX status.
-+	 */
-+	success =
-+	    rt2x00lib_txdone_bar_status(entry) ||
-+	    test_bit(TXDONE_SUCCESS, &txdesc->flags);
-+
-+	if (!test_bit(TXDONE_UNKNOWN, &txdesc->flags)) {
-+		/*
-+		 * Update TX statistics.
-+		 */
-+		rt2x00dev->link.qual.tx_success += success;
-+		rt2x00dev->link.qual.tx_failed += !success;
-+
-+		rt2x00lib_fill_tx_status(rt2x00dev, &txinfo, skbdesc, txdesc,
-+					 success);
-+		ieee80211_tx_status_noskb(rt2x00dev->hw, skbdesc->sta, &txinfo);
-+	}
-+
-+	dev_kfree_skb_any(entry->skb);
-+	rt2x00lib_clear_entry(rt2x00dev, entry);
-+}
-+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_nomatch);
-+
- void rt2x00lib_txdone(struct queue_entry *entry,
- 		      struct txdone_entry_desc *txdesc)
- {
--- 
-2.12.1
-