Compare commits

..

50 Commits

Author SHA1 Message Date
Hauke Mehrtens
2bc192c3f4 OpenWrt v21.02.0-rc3: adjust config defaults
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-06-14 20:33:04 +02:00
Hauke Mehrtens
2aba3e9784 opkg: update to git HEAD
1bf042d libopkg: pkg_hash: print unresolved dependencies

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit da86064611)
2021-06-14 00:02:19 +02:00
Hannu Nyman
ea308e2f38 treewide: mark selected packages nonshared
Mark uci, ubus, libubox, lua, libnl-tiny and libjson-c
as nonshared packages. This helps to keep coherent dependencies
if these ABI versioned packages are later updated.

Before this commit it is possible to get missing dependencies
in target-specific nonshared packages (like iwinfo) that depend
on these shared ABI versioned packages. If these are later updated
and rebuilt, only the new ABI version will be available for download,
while the target-specific packages in releases continue to depend on
the old ABI version.

After this commit the packages are built along the other nonshared
packages by the phase1 images buildbot and will be available at the
target/ download directories instead of packages/base dir. That will
help to keep a coherent set available.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 72cc44958e)
2021-06-14 00:02:13 +02:00
Paul Spooren
144bf23e5a README: switch from freenode to oftc
We recently switched from freenode.net to oftc.net, reflect that in the
README and update the links.

Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 5a66165cb1)
2021-06-12 12:41:29 -10:00
Paul Spooren
78a2aef8d6 README: update routing.git URL
The routing packages feed moved from `openwrt-routing/packages` to
`openwrt/routing`, reflect that in the README.

Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 0371f40193)
2021-06-12 12:41:29 -10:00
Pawel Dembicki
1562613077 ramips: mt7620: add kernel size for Jboot devices
Since few months multiple users reported problems with various JBoot
devices. [0][1][2][3] All of them was bricked.

On my Lava LR-25G001 it freezes with current snapshot:

CDW57CAM_003 Jboot B695
Giga Switch AR8327 init
AR8327/AR8337 id   ==> 0x1302
JRecovery Version R1.2 2014/04/01 18:25
SPI FLASH: MX25l12805d 16M
.
.
(freeze)

The kernel size is >2048k.

I built current master with minimal config and it boots well:

CDW57CAM_003 Jboot B695
Giga Switch AR8327 init
AR8327/AR8337 id   ==> 0x1302
JRecovery Version R1.2 2014/04/01 18:25
SPI FLASH: MX25l12805d 16M
.
...........................
Starting kernel @80000000...
[    0.000000] Linux version 5.4.124

Kernel size is <2048k.

Jboot bootloader isn't open source, so it's impossible to find
solution in code. It looks, that some buffer for kernel have 2MB size.

To avoid bricked devices, this commit introduces 2048k limit kernel
size for all jboot routers.

[0] https://bugs.openwrt.org/index.php?do=details&task_id=3539
[1] https://eko.one.pl/forum/viewtopic.php?pid=254344
[2] https://eko.one.pl/forum/viewtopic.php?id=20930
[3] https://eko.one.pl/forum/viewtopic.php?pid=241376#p241376

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[remove Fixes:]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit e1d8a14cd0)
2021-06-12 11:01:43 +02:00
Adam Elyas
8078d953b8 ramips: fix LAN LED trigger assignment for Xiaomi Router 3 Pro
The default trigger for the amber lights on lan1 and lan3 were
mistakenly swapped after the device's migration to DSA. This
caused activity on one port to trigger the amber light on the
other port. Swapping their default trigger in the DTS file
fixes that.

Signed-off-by: Adam Elyas <adamelyas@outlook.com>
[minor commit title adjustment, wrap commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit edaf432bf4)
2021-06-12 11:01:43 +02:00
Liu Yu
e422a3af69 ramips: fix Ethernet random MAC address for HILINK HLK-7628N
Set the ethernet address from flash.

MAC addresses as verified by OEM firmware:

  use   interface  source
  2g    wlan0      factory 0x04 (label)
  LAN   eth0.1     factory 0x28 (label+1)
  WAN   eth0.2     factory 0x2e (label+2)

Fixes: 671c9d16e3 ("ramips: add support for HILINK HLK-7628N")

Signed-off-by: Liu Yu <f78fk@live.com>
[drop old MAC address setup from 02_network, cut out state_default
changes, face-lift commit message, add Fixes:]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit ae9c5cd37b)
2021-06-12 11:01:43 +02:00
Jonathan A. Kollasch
0794a784e9 ath79: fix eth0 PLL registers on WD My Net Wi-Fi Range Extender
This replaces the register bits for RGMII delay on the MAC side in favor
of having the RGMII delay on the PHY side by setting the phy-mode
property to rgmii-id (RGMII internal delay), which is supported by the
at803x driver.  Speed 1000 is fixed as a result, so now all ethernet
speeds function.

Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit f36990eae7)
2021-06-12 11:01:43 +02:00
Petr Štetiar
1a8de9cbf9 Revert "ci: build test ath79/generic"
This reverts commit 16d6288c63 which was
accidentally commited.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2021-06-11 09:05:13 +02:00
Petr Štetiar
16d6288c63 ci: build test ath79/generic
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2021-06-11 07:22:19 +02:00
Michael Pratt
02b7b77332 ath79: set lzma-loader variables to null by default
This fixes a small regression where the lzma-loader variable values
are being shared between boards that require different configurations.

If not set to "" globally, a device without these settings will just take
the last values another device has set before in the queue.

Fixes: 1b8bd17c2d ("ath79: lzma-loader: allow setting custom kernel magic")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
[add detailed explanation to the commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit bf8c16dfa2)
2021-06-11 07:20:31 +02:00
Michael Pratt
349a4f4531 ath79: move pcie node to DTSI for qca955x Senao APs
pcie0 is the same for this generation of Senao APs
while eth0, eth1, and wmac can differ

the qca,no-eeprom property has no effect
for the ath10k drivers

Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit 15c599c9df)
2021-06-11 07:20:31 +02:00
Michael Pratt
518adcfe77 ath79: cleanup DTS for ALLNET ALL-WAP02860AC
use qca955x_senao_loader.dtsi
because it is the same hardware / partitioning
and some cleanup

Effects:

nodes to match similar boards
 - keys
 - eth0
 - pcie0

bumps SPI frequency to 40 MHz

removes &pll node:
the property is defined in qca955x.dtsi

removes qca,no-eeprom:
has no effect with mtd-cal-data property
(also spelling)

Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit e800da9d5c)
2021-06-11 07:20:31 +02:00
Michael Pratt
a97f4f3b29 ath79: add factory.bin for ALLNET ALL-WAP02860AC
This device is a Senao-based product
using hardware and software from Senao
with the tar-gz platform for factory.bin
and checksum verification at boot time
using variables stored in uboot environment
and a 'failsafe' image when it fails.

Extremely similar hardware/software to Engenius EAP1200H
and other Engenius APs with qca955x

Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit 37ea5d9a65)
2021-06-11 07:20:31 +02:00
Michael Pratt
e823fb1763 ath79: add Senao 'failsafe' sysupgrade procedure
Use a similar upgrade method for sysupgrade.bin, like factory.bin,
for Senao boards with the tar.gz OEM upgrade platform,
and 'failsafe' image which is loaded on checksum failure.

This is inspired by the OEM upgrade script /etc/fwupgrade.sh
and the existing platforms for dual-boot Senao boards.

Previously, if the real kernel was damaged or missing
the only way to recover was with UART serial console,
because the OKLI lzma-loader is programmed to halt.

uboot did not detect cases where kernel or rootfs is damaged
and boots OKLI instead of the failsafe image,
because the checksums stored in uboot environment
did not include the real kernel and rootfs space.

Now, the stored checksums include the space for both
the lzma-loader, kernel, and rootfs.
Therefore, these boards are now practically unbrickable.

Also, the factory.bin and sysupgrade.bin are now the same,
except for image metadata.
This allows for flashing OEM image directly from openwrt
as well as flashing openwrt image directly from OEM.

Make 'loader' partition writable so that it can be updated
during a sysupgrade.

tested with
ENS202EXT v1
EAP1200H
EAP350 v1
EAP600
ECB350 v1
ECB600
ENH202 v1

Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit d5035f0d26)
2021-06-11 07:20:31 +02:00
Michael Pratt
642c88714c ath79: adjust ath79/tiny Senao APs to 4k blocksize
ath79/tiny kernel config has
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
from commit
05d35403b2

Because of this, these changes are required for 2 reasons:

1.

Senao devices in ath79/tiny
with a 'failsafe' partition and the tar.gz sysupgrade platform
and a flash chip that supports 4k sectors
will fail to reboot to openwrt after a sysupgrade.

the stored checksum is made with the 64k blocksize length
of the image to be flashed,
and the actual checksum changes after flashing due to JFFS2 space
being formatted within the length of the rootfs from the image

example:
0x440000 length of kernel + rootfs (from sysupgrade.bin)
0x439000 offset of rootfs_data (from kernel log)

2.

for boards with flash chips that support 4k sectors:
saving configuration over sysupgrade is not possible
because sysupgrade.tgz is appended at a 64k boundary
and the mtd parser starts JFFS2 at a 4k boundary.

for boards with flash chips that do not support 4k sectors:
partitioning with 4k boundaries causes a boot loop
from the mtd parser not finding kernel and rootfs.

Also:

Some of the Senao boards that belong in ath79/tiny,
for example ENH202,
have a flash chip that does not support 4k sectors
(no SECT_4K symbol in upstream source).

Because of this, partitioning must be different for these devices
depending on the flash chip model detected by the kernel.

Therefore:

this creates 2 DTSI files
to replace the single one with 64k partitioning
for 4k and 64k partitioning respectively.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit a58cb22bbe)
2021-06-11 07:20:31 +02:00
Michael Pratt
64d845ef02 ath79: remove 'fakeroot' for Senao devices
By using the same custom kernel header magic
in both OKLI lzma-loader, DTS, and makefile
this hack is not necessary anymore

However, "rootfs" size and checksum
must now be supplied by the factory.bin image
through a script that is accepted by the OEM upgrade script.

This is because Senao OEM scripts assume a squashfs header exists
at the offset for the original "rootfs" partition
which is actually the kernel + rootfs in this implementation,
and takes size value from the header that would be there with hexdump,
but this offset is now the uImage header instead.

This frees up 1 eraseblock
previously used by the "fakeroot" partition
for bypassing the OEM image verification.

Also, these Senao devices with a 'failsafe' partition
and the tar-gz factory.bin platform would otherwise require
flashing the new tar-gz sysupgrade.bin afterward.
So this also prevents having to flash both images
when starting from OEM or 'failsafe'

the OEM upgrade script verifies the header magic numbers,
but only the first two bytes.
Example:

    [ "${magic_word_kernel}" = "2705" ] &&
    [ "${magic_word_rootfs}" = "7371" -o "${magic_word_rootfs}" = "6873" ] &&
    errcode="0"

therefore picked the magic number
0x73714f4b
which is
'sqOK'

Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit 4a0cc5d4ef)
2021-06-11 07:20:31 +02:00
Michael Pratt
1f6ec4b29e ath79: lzma-loader: allow setting custom kernel magic
...and max flash offset

The mtdsplit parser was recently refactored
to allow the kernel to have custom image header magic.

Let's also do this for the lzma-loader

For example:
When implemented together,
this allows the kernel to "appear" to be a rootfs
by OEM software in order to write an image
that is actually kernel + rootfs.

At the same time,
it would boot to openwrt normally
by setting the same magic in DTS.

Both of the variables
have a default value that is unchanged
when not defined in the makefiles

This has no effect on the size of the loader
when lzma compressed.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit 1b8bd17c2d)
2021-06-11 07:20:31 +02:00
Adrian Schmutzler
08ec7acbc3 ath79: create common DTSI for Senao qca955x APs
This creates a shared DTSI for qca955x Senao/Engenius APs with
concatenated firmware partition/okli loader:

 - EAP1200H
 - EnstationAC v1

To make this usable for future boards with 32 MB flash as well,
split the partitions node already.

Suggested-by: Michael Pratt <mcpratt@pm.me>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 9b37db5caa)
2021-06-11 07:20:31 +02:00
Adrian Schmutzler
7850f5071a ath79: create common DTSI for Senao ar934x APs
This creates a shared DTSI for ar934x Senao/Engenius APs:

 - EAP300 v2
 - ENS202EXT v1
 - EAP600
 - ECB600

Since ar9341/ar9344 have different configuration, this new file
mostly contains the partitioning.

Suggested-by: Michael Pratt <mcpratt@pm.me>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit ce8b535ed3)
2021-06-11 07:20:31 +02:00
Adrian Schmutzler
a49686c948 ath79: create common DTSI for Senao ar724x APs
This creates a shared DTSI for ar724x Senao/Engenius APs:

 - ENH202 v1
 - EAP350 v1
 - ECB350 v1

Since ar7240/ar7242 have different configuration, this new file
mostly contains the partitioning.

Suggested-by: Michael Pratt <mcpratt@pm.me>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 4204d70d7a)
2021-06-11 07:20:31 +02:00
Michael Pratt
a1b2815b52 ath79: rename 'engenius' Makefile definitions to 'senao'
These recipes and definitions can apply
to devices from other vendors
with PCB boards or SDK produced by Senao
not only the brand Engenius

possible examples:
Extreme Networks, WatchGuard, OpenMesh,
Fortinet, ALLNET, OCEDO, Plasma Cloud, devolo, etc.

so rename all of these items
and move DEVICE_VENDOR from common to generic/tiny.mk

Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit 70bf4a979c)
2021-06-11 07:20:31 +02:00
Andreas Böhler
46b53ce83b ramips: Add support for SERCOMM NA502
The SERCOMM NA502 is a smart home gateway manufactured by SERCOMM and sold
under different brands (among others, A1 Telekom Austria SmartHome
Gateway). It has multi-protocol radio support in addition to LAN and WiFi.

Note: BLE is currently unsupported.

Specifications
--------------

  - MT7621ST 880MHz, Single-Core, Dual-Thread
  - MT7603EN 2.4GHz WiFi
  - MT7662EN 5GHz WiFi + BLE
  - 128MiB NAND
  - 256MiB DDR3 RAM
  - SD3503 ZWave Controller
  - EM357 Zigbee Coordinator

MAC address assignment
----------------------

LAN MAC is read from the config partition, WiFi 2.4GHz is LAN+2 and matches
the OEM firmware. WiFi 5GHz with LAN+1 is an educated guess since the
OEM firmware does not enable 5GHz WiFi.

Installation
------------
Attach serial console, then boot the initramfs image via TFTP.
Once inside OpenWrt, run sysupgrade -n with the sysupgrade file.

Attention: The device has a dual-firmware design. We overwrite kernel2,
since kernel1 contains an automatic recovery image.

If you get NAND ECC errors and are stuck with bad eraseblocks, try to
erase the mtd partition first with

mtd unlock ubi
mtd erase ubi

This should only be needed once.

Signed-off-by: Andreas Böhler <dev@aboehler.at>
[use kiB for IMAGE_SIZE]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

(cherry picked from commit a3d8c1295e)
2021-06-10 17:09:35 +02:00
Tee Hao Wei
97df795b78 ramips: add support for Linksys EA8100 v1
Specifications:
- SoC: MT7621AT
- RAM: 256MB
- Flash: 128MB NAND
- Ethernet: 5 Gigabit ports
- WiFi: 2.4G/5G MT7615N
- USB: 1 USB 3.0, 1 USB 2.0

This device is very similar to the EA7300 v1/v2 and EA7500 v2.

Installation:

Upload the generated factory image through the factory web interface.

(following part taken from EA7300 v2 commit message:)

This might fail due to the A/B nature of this device. When flashing, OEM
firmware writes over the non-booted partition. If booted from 'A',
flashing over 'B' won't work. To get around this, you should flash the
OEM image over itself. This will then boot the router from 'B' and
allow you to flash OpenWRT without problems.

Reverting to factory firmware:

Hard-reset the router three times to force it to boot from 'B.' This is
where the stock firmware resides. To remove any traces of OpenWRT from
your router simply flash the OEM image at this point.

With thanks to Leon Poon (@LeonPoon) for the initial bringup.

Signed-off-by: Tee Hao Wei <angelsl@in04.sg>
[add missing entry in 10_fix_wifi_mac]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit b232680f84)
2021-06-10 17:09:35 +02:00
Jonathan Sturges
5e6837cf8f ramips: add support for Amped Wireless ALLY router and extender
Amped Wireless ALLY is a whole-home WiFi kit, with a router (model
ALLY-R1900K) and an Extender (model ALLY-00X19K).  Both are devices are
11ac and based on MediaTek MT7621AT and MT7615N chips.  The units are
nearly identical, except the Extender lacks a USB port and has a single
Ethernet port.

Specification:
- SoC: MediaTek MT7621AT (2C/4T) @ 880MHz
- RAM: 128MB DDR3 (Nanya NT5CC64M16GP-DI)
- FLASH: 128MB NAND (Winbond W29N01GVSIAA)
- WiFi: 2.4/5 GHz 4T4R
  - 2.4GHz MediaTek MT7615N bgn
  - 5GHz MediaTek MT7615N nac
- Switch: SoC integrated Gigabit Switch
- USB: 1x USB3 (Router only)
- BTN: Reset, WPS
- LED: single RGB
- UART:  through-hole on PCB.
   J1: pin1 (square pad, towards rear)=3.3V, pin2=RX,
   pin3=GND, pin4=TX.  Settings: 57600/8N1.

Note regarding dual system partitions
-------------------------------------

The vendor firmware and boot loader use a dual partition scheme.  The boot
partition is decided by the bootImage U-boot environment variable: 0 for
the 1st partition, 1 for the 2nd.

OpenWrt does not support this scheme and will always use the first OS
partition.  It will set bootImage to 0 during installation, making sure
the first partition is selected by the boot loader.

Also, because we can't be sure which partition is active to begin with, a
2-step flash process is used.  We first flash an initramfs image, then
follow with a regular sysupgrade.

Installation:

Router (ALLY-R1900K)
1) Install the flashable initramfs image via the OEM web-interface.
  (Alternatively, you can use the TFTP recovery method below.)
  You can use WiFi or Ethernet.
  The direct URL is:  http://192.168.3.1/07_06_00_firmware.html
  a. No login is needed, and you'll be in their setup wizard.
  b. You might get a warning about not being connected to the Internet.
  c. Towards the bottom of the page will be a section entitled "Or
  Manually Upgrade Firmware from a File:" where you can manually choose
  and upload a firmware file.
  d: Click "Choose File", select the OpenWRT "initramfs" image and click
  "Upload."
2) The Router will flash the OpenWrt initramfs image and reboot.  After
  booting, LuCI will be available on 192.168.1.1.
3) Log into LuCI as root; there is no password.
4) Optional (but recommended) is to backup the OEM firmware before
  continuing; see process below.
5) Complete the Installation by flashing a full OpenWRT image.  Note:
  you may use the sysupgrade command line tool in lieu of the UI if
  you prefer.
  a.  Choose System -> Backup/Flash Firmware.
  b.  Click "Flash Image..." under "Flash new firmware image"
  c.  Click "Browse..." and then select the sysupgrade file.
  d.  Click Upload to upload the sysupgrade file.
  e.  Important:  uncheck "Keep settings and retain the current
      configuration" for this initial installation.
  f.  Click "Continue" to flash the firmware.
  g.  The device will reboot and OpenWRT is installed.

Extender (ALLY-00X19K)
1) This device requires a TFTP recovery procedure to do an initial load
  of OpenWRT.  Start by configuring a computer as a TFTP client:
  a. Install a TFTP client (server not necessary)
  b. Configure an Ethernet interface to 192.168.1.x/24; don't use .1 or .6
  c. Connect the Ethernet to the sole Ethernet port on the X19K.
2) Put the ALLY Extender in TFTP recovery mode.
  a. Do this by pressing and holding the reset button on the bottom while
  connecting the power.
  b. As soon as the LED lights up green (roughly 2-3 seconds), release
  the button.
3) Start the TFTP transfer of the Initramfs image from your setup machine.
For example, from Linux:
tftp -v -m binary 192.168.1.6 69 -c put initramfs.bin
4) The Extender will flash the OpenWrt initramfs image and reboot.  After
booting, LuCI will be available on 192.168.1.1.
5) Log into LuCI as root; there is no password.
6) Optional (but recommended) is to backup the OEM firmware before
  continuing; see process below.
7) Complete the Installation by flashing a full OpenWRT image.  Note: you
may use the sysupgrade command line tool in lieu of the UI if you prefer.
  a.  Choose System -> Backup/Flash Firmware.
  b.  Click "Flash Image..." under "Flash new firmware image"
  c.  Click "Browse..." and then select the sysupgrade file.
  d.  Click Upload to upload the sysupgrade file.
  e.  Important:  uncheck "Keep settings and retain the current
      configuration" for this initial installation.
  f.  Click "Continue" to flash the firmware.
  g.  The device will reboot and OpenWRT is installed.

Backup the OEM Firmware:
-----------------------

There isn't any downloadable firmware for the ALLY devices on the Amped
Wireless web site. Reverting back to the OEM firmware is not possible
unless we have a backup of the original OEM firmware.

The OEM firmware may be stored on either /dev/mtd3 ("firmware") or
/dev/mtd6 ("oem").  We can't be sure which was overwritten with the
initramfs image, so backup both partitions to be safe.

  1) Once logged into LuCI, navigate to System -> Backup/Flash Firmware.
  2) Under "Save mtdblock contents," first select "firmware" and click
  "Save mtdblock" to download the image.
  3) Repeat the process, but select "oem" from the pull-down menu.

Revert to the OEM Firmware:
--------------------------
* U-boot TFTP:
  Follow the TFTP recovery steps for the Extender, and use the
  backup image.

* OpenWrt "Flash Firmware" interface:
  Upload the backup image and select "Force update"
  before continuing.

Signed-off-by: Jonathan Sturges <jsturges@redhat.com>

(cherry picked from commit 6d23e474ad)
2021-06-10 17:09:35 +02:00
Aashish Kulkarni
7cdddfb266 ramips: add support for Linksys E5600
This submission relied heavily on the work of Linksys EA7300 v1/ v2.

Specifications:

* SoC: MediaTek MT7621A (880 MHz 2c/4t)
* RAM: 128M DDR3-1600
* Flash: 128M NAND
* Eth: MediaTek MT7621A (10/100/1000 Mbps x5)
* Radio: MT7603E/MT7613BE (2.4 GHz & 5 GHz)
* Antennae: 2 internal fixed in the casing and 2 on the PCB
* LEDs: Blue (x4 Ethernet)
  Blue+Orange (x2 Power + WPS and Internet)
* Buttons: Reset (x1)
  WPS (x1)

Installation:

Flash factory image through GUI.

This device has 2 partitions for the firmware called firmware and
alt_firmware. To successfully flash and boot the device, the device
should have been running from alt_firmware partition. To get the device
booted through alt_firmware partition, download the OEM firmware from
Linksys website and upgrade the firmware from web GUI. Once this is done,
flash the OpenWrt Factory firmware from web GUI.

Reverting to factory firmware:

1. Boot to 'alt_firmware'(where stock firmware resides) by doing one of
   the following:
   Press the "wps" button as soon as power LED turns on when booting.
   (OR) Hard-reset the router consecutively three times to force it to
   boot from 'alt_firmware'.
2. To remove any traces of OpenWRT from your router simply flash the OEM
   image at this point.

Signed-off-by: Aashish Kulkarni <aashishkul@gmail.com>

[fix hanging indents and wrap to 74 characters per line,
 add kmod-mt7663-firmware-sta package for 5GHz STA mode to work,
 remove sysupgrade.bin and concatenate IMAGES instead in mt7621.mk,
 set default-state "on" for power LED]
Signed-off-by: Sannihith Kinnera <digislayer@protonmail.com>

[move check-size before append-metadata, remove trailing whitespace]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Sannihith Kinnera <digislayer@protonmail.com>
(cherry picked from commit 251c995cbb)
2021-06-10 17:09:35 +02:00
Chukun Pan
9fa5b3afc9 ramips: add support for JCG Q20
JCG Q20 is an AX 1800M router.

Hardware specs:
  SoC: MediaTek MT7621AT
  Flash: Winbond W29N01HV 128 MiB
  RAM: Winbond W632GU6NB-11 256 MiB
  WiFi: MT7915 2.4/5 GHz 2T2R
  Ethernet: 10/100/1000 Mbps x3
  LED: Status (red / blue)
  Button: Reset, WPS
  Power: DC 12V,1A

Flash instructions:
  Upload factory.bin in stock firmware's upgrade page,
  do not preserve settings.

MAC addresses map:
  0x00004 *:3e wlan2g/wlan5g
  0x3fff4 *:3c lan/label
  0x3fffa *:3c wan

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 57cb387cfe)
2021-06-10 17:09:35 +02:00
Leon M. George
d11f40a0f7 ramips: add support for cudy WR2100
Specifications

  SoC:       MT7621
  CPU:       880 MHz
  Flash:     16 MiB
  RAM:       128 MiB
  WLAN:      2.4 GHz b/g/n, 5 GHz a/n/ac
             MT7603E / MT7615E
  Ethernet:  5x Gbit ports

Installation

There are two known options:
1) The Luci-based UI.
2) Press and hold the reset button during power up.
   The router will request 'recovery.bin' from a TFTP server at
   192.168.1.88.

Both options require a signed firmware binary.
The openwrt image supplied by cudy is signed and can be used to
install unsigned images.

R4 & R5 need to be shorted (0-100Ω) for the UART to work.

Signed-off-by: Leon M. George <leon@georgemail.eu>
[remove non-required switch-port node - remove trgmii phy-mode]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 3501db9b9b)
2021-06-10 17:09:35 +02:00
Georgi Vlaev
31be361269 ramips: add support for TP-Link Archer C6U v1 (EU)
This patch adds support for TP-Link Archer C6U v1 (EU).
The device is also known in some market as Archer C6 v3.
This patch supports only Archer C6U v1 (EU).

Specifications:
--------------

* SoC: Mediatek MT7621AT 2C2T, 880MHz
* RAM: 128MB DDR3
* Flash: 16MB SPI NOR flash (Winbond 25Q128)
* WiFi 5GHz: Mediatek MT7613BEN (2x2:2)
* WiFi 2.4GHz: Mediatek MT7603EN (2x2:2)
* Ethernet: MT7630, 5x 1000Base-T.
* LED: Power, WAN, LAN, WiFi 2GHz and 5GHz, USB
* Buttons: Reset, WPS.
* UART: Serial console (115200 8n1), J1(GND:3)
* USB: One USB2 port.

Installation:
------------

Install the OpenWrt factory image for C6U is from the
TP-Link web interface.

1) Go to "Advanced/System Tools/Firmware Update".
2) Click "Browse" and upload the OpenWrt factory image:
openwrt-ramips-mt7621-tplink_archer-c6u-v1-squashfs-factory.bin.
3) Click the "Upgrade" button, and select "Yes" when prompted.

Recovery to stock firmware:
--------------------------

The C6U bootloader has a failsafe mode that provides a web
interface (running at 192.168.0.1) for reverting back to the
stock TP-Link firmware. The failsafe interface is triggered
from the serial console or on failed kernel boot. Unfortunately,
there's no key combination that enables the failsafe mode. This
gives us two options for recovery:

1) Recover using the serial console (J1 header).
The recovery interface can be selected by hitting 'x' when
prompted on boot.

2) Trigger the bootloader failsafe mode.
A more dangerous option is force the bootloader into
recovery mode by erasing the OpenWrt partition from the
OpenWrt's shell - e.g "mtd erase firmware". Please be
careful, since erasing the wrong partition can brick
your device.

MAC addresses:
-------------

OEM firmware configuration:
D8:07:B6:xx:xx:83 : 5G
D8:07:B6:xx:xx:84 : LAN (label)
D8:07:B6:xx:xx:84 : 2.4G
D8:07:B6:xx:xx:85 : WAN

Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
(cherry picked from commit a46ad596a3)
2021-06-10 17:09:35 +02:00
Vinay Patil
30915e5a70 ramips: add support for TP-Link Archer A6 v3
The patch adds support for the TP-Link Archer A6 v3
The router is sold in US and India with FCC ID TE7A6V3

Specification
-------------
MediaTek MT7621 SOC
RAM:         128MB DDR3
SPI Flash:   W25Q128 (16MB)
Ethernet:    MT7530 5x 1000Base-T
WiFi 5GHz:   Mediatek MT7613BE
WiFi 2.4GHz: Mediatek MT7603E
UART/Serial: 115200 8n1

Device Configuration & Serial Port Pins
---------------------------------------
ETH Ports:    LAN4 LAN3 LAN2 LAN1 WAN
             _______________________
             |                     |
Serial Pins: |   VCC GND TXD RXD   |
             |_____________________|

LEDs:         Power Wifi2G Wifi5G LAN WAN

Build Output
------------
The build will generate following set of files
[1] openwrt-ramips-mt7621-tplink_archer-a6-v3-initramfs-kernel.bin
[2] openwrt-ramips-mt7621-tplink_archer-a6-v3-squashfs-factory.bin
[3] openwrt-ramips-mt7621-tplink_archer-a6-v3-squashfs-sysupgrade.bin

How to Use - Flashing from TP-Link Web Interface
------------------------------------------------
* Go to "Advanced/System Tools/Firmware Update".
* Click "Browse" and upload the OpenWrt factory image: factory.bin[2]
* Click the "Upgrade" button, and select "Yes" when prompted.

TFTP Booting
------------
Setup a TFTP boot server with address 192.168.0.5.
While starting U-boot press '4' key to stop autoboot.
Copy the initramfs-kernel.bin[1] to TFTP server folder, rename as test.bin
From u-boot command prompt run tftpboot followed by bootm.

Recovery
--------
Archer A6 V3 has recovery page activated if SPI booting from flash fails.
Recovery page can be activated from serial console only.
Press 'x' while u-boot is starting
Note: TFTP boot can be activated only from u-boot serial console.
Device recovery address: 192.168.0.1

Thanks to: Frankis for Randmon MAC address fix.

Signed-off-by: Vinay Patil <post2vinay@gmail.com>
[remove superfluous factory image definition, whitespacing]
Signed-off-by: David Bauer <mail@david-bauer.net>

(cherry picked from commit f8f8935adb)
2021-06-10 17:09:35 +02:00
Bjørn Mork
8c986d2ab9 ramips: mt7621: Add support for ZyXEL NR7101
The ZyXEL NR7101 is an 802.3at PoE powered 5G outdoor (IP68) CPE
with integrated directional 5G/LTE antennas.

Specifications:

 - SoC: MediaTek MT7621AT
 - RAM: 256 MB
 - Flash: 128 MB MB NAND (MX30LF1G18AC)
 - WiFi: MediaTek MT7603E
 - Switch: 1 LAN port (Gigabiti)
 - 5G/LTE: Quectel RG502Q-EA connected by USB3 to SoC
 - SIM: 2 micro-SIM slots under transparent cover
 - Buttons: Reset, WLAN under same cover
 - LEDs: Multicolour green/red/yellow under same cover (visible)
 - Power: 802.3at PoE via LAN port

The device is built as an outdoor ethernet to 5G/LTE bridge or
router. The Wifi interface is intended for installation and/or
temporary management purposes only.

UART Serial:

57600N1
Located on populated 5 pin header J5:

 [o] GND
 [ ] key - no pin
 [o] RX
 [o] TX
 [o] 3.3V Vcc

Remove the SIM/button/LED cover, the WLAN button and 12 screws
holding the back plate and antenna cover together. The GPS antenna
is fixed to the cover, so be careful with the cable.  Remove 4
screws fixing the antenna board to the main board, again being
careful with the cables.

A bluetooth TTL adapter is recommended for permanent console
access, to keep the router water and dustproof. The 3.3V pin is
able to power such an adapter.

MAC addresses:

OpenWrt OEM   Address          Found as
lan     eth2  08:26:97:*:*:BC  Factory 0xe000 (hex), label
wlan0   ra0   08:26:97:*:*:BD  Factory 0x4 (hex)
wwan0   usb0  random

WARNING!!

ISP managed firmware might at any time update itself to a version
where all known workarounds have been disabled.  Never boot an ISP
managed firmware with a SIM in any of the slots if you intend to use
the router with OpenWrt. The bootloader lock can only be disabled with
root access to running firmware. The flash chip is physically
inaccessible without soldering.

Installation from OEM web GUI:

- Log in as "supervisor" on https://172.17.1.1/
- Upload OpenWrt initramfs-recovery.bin image on the
  Maintenance -> Firmware page
- Wait for OpenWrt to boot and ssh to root@192.168.1.1
- (optional) Copy OpenWrt to the recovery partition. See below
- Sysupgrade to the OpenWrt sysupgrade image and reboot

Installation from OEM ssh:

- Log in as "root" on 172.17.1.1 port 22022
- scp OpenWrt initramfs-recovery.bin image to 172.17.1.1:/tmp
- Prepare bootloader config by running:
    nvram setro uboot DebugFlag 0x1
    nvram setro uboot CheckBypass 0
    nvram commit
- Run "mtd_write -w write initramfs-recovery.bin Kernel" and reboot
- Wait for OpenWrt to boot and ssh to root@192.168.1.1
- (optional) Copy OpenWrt to the recovery partition. See below
- Sysupgrade to the OpenWrt sysupgrade image and reboot

Copying OpenWrt to the recovery partition:

- Verify that you are running a working OpenWrt recovery image
  from flash
- ssh to root@192.168.1.1 and run:
    fw_setenv CheckBypass 0
    mtd -r erase Kernel2
- Wait while the bootloader mirrors Image1 to Image2

NOTE: This should only be done after successfully booting the OpenWrt
  recovery image from the primary partition during installation.  Do
  not do this after having sysupgraded OpenWrt!  Reinstalling the
  recovery image on normal upgrades is not required or recommended.

Installation from Z-Loader:

- Halt boot by pressing Escape on console
- Set up a tftp server to serve the OpenWrt initramfs-recovery.bin
  image at 10.10.10.3
- Type "ATNR 1,initramfs-recovery.bin" at the "ZLB>" prompt
- Wait for OpenWrt to boot and ssh to root@192.168.1.1
- Sysupgrade to the OpenWrt sysupgrade image

NOTE: ATNR will write the recovery image to both primary and recovery
  partitions in one go.

Booting from RAM:

- Halt boot by pressing Escape on console
- Type "ATGU" at the "ZLB>" prompt to enter the U-Boot menu
- Press "4" to select "4: Entr boot command line interface."
- Set up a tftp server to serve the OpenWrt initramfs-recovery.bin
  image at 10.10.10.3
- Load it using "tftpboot 0x88000000 initramfs-recovery.bin"
- Boot with "bootm  0x8800017C" to skip the 380 (0x17C) bytes ZyXEL
  header

This method can also be used to RAM boot OEM firmware. The warning
regarding OEM applies!  Never boot an unknown OEM firmware, or any OEM
firmware with a SIM in any slot.

NOTE: U-Boot configuration is incomplete (on some devices?). You may
  have to configure a working mac address before running tftp using
   "setenv eth0addr <mac>"

Unlocking the bootloader:

If you are unebale to halt boot, then the bootloader is locked.

The OEM firmware locks the bootloader on every boot by setting
DebugFlag to 0.  Setting it to 1 is therefore only temporary
when OEM firmware is installed.

- Run "nvram setro uboot DebugFlag 0x1; nvram commit" in OEM firmware
- Run "fw_setenv DebugFlag 0x1" in OpenWrt

  NOTE:
    OpenWrt does this automatically on first boot if necessary

  NOTE2:
    Setting the flag to 0x1 avoids the reset to 0 in known OEM
    versions, but this might change.

  WARNING:
    Writing anything to flash while the bootloader is locked is
    considered extremely risky. Errors might cause a permanent
    brick!

Enabling management access from LAN:

Temporary workaround to allow installing OpenWrt if OEM firmware
has disabled LAN management:

- Connect to console
- Log in as "root"
- Run "iptables -I INPUT -i br0 -j ACCEPT"

Notes on the OEM/bootloader dual partition scheme

The dual partition scheme on this device uses Image2 as a recovery
image only. The device will always boot from Image1, but the
bootloader might copy Image2 to Image1 under specific conditions. This
scheme prevents repurposing of the space occupied by Image2 in any
useful way.

Validation of primary and recovery images is controlled by the
variables CheckBypass, Image1Stable, and Image1Try.

The bootloader sets CheckBypass to 0 and reboots if Image1 fails
validation.

If CheckBypass is 0 and Image1 is invalid then Image2 is copied to
Image1.

If CheckBypass is 0 and Image2 is invalid, then Image1 is copied to
Image2.

If CheckBypass is 1 then all tests are skipped and Image1 is booted
unconditionally.  CheckBypass is set to 1 after each successful
validation of Image1.

Image1Try is incremented if Image1Stable is 0, and Image2 is copied to
Image1 if Image1Try is 3 or larger.  But the bootloader only tests
Image1Try if CheckBypass is 0, which is impossible unless the booted
image sets it to 0 before failing.

The system is therefore not resilient against runtime errors like
failure to mount the rootfs, unless the kernel image sets CheckBypass
to 0 before failing. This is not yet implemented in OpenWrt.

Setting Image1Stable to 1 prevents the bootloader from updating
Image1Try on every boot, saving unnecessary writes to the environment
partition.

Keeping an OpenWrt initramfs recovery as Image2 is recommended
primarily to avoid unwanted OEM firmware boots on failure. Ref the
warning above. It enables console-less recovery in case of some
failures to boot from Image1.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Tested-by: Bjørn Mork <bjorn@mork.no>
(cherry picked from commit 2449a63208)
2021-06-10 17:09:35 +02:00
Kevin Darbyshire-Bryant
27f4559281 firmware-utils: fix coverity zytrx.c resource leak
fix coverity resource leak warning:

    	*len = stat.st_size;
    	mapped = mmap(NULL, stat.st_size, PROT_READ, MAP_SHARED, fd, 0);
    	if (close(fd) < 0)
CID 1484880:  Resource leaks  (RESOURCE_LEAK)
Variable "mapped" going out of scope leaks the storage it points to.
    		return NULL;
    	return mapped;
    }

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit baf2a50ef3)
2021-06-10 17:09:35 +02:00
Bjørn Mork
dd6f02a3f4 firmware-utils: zytrx: Add util for ZyXEL specific header
The ZyXEL NR7101 prepend an additional header to U-Boot images. This
header use the TRX magic 0x30524448 (HDR0), but is incompatible with
TRX images.

This code is reverse-engineered based on matching 32 bit numbers
found in the header with lengths and different checksum
calculations of the vendor images found on the device.  The result
was matched against the validation output produced by the
bootloader to name the associated header fields.

Example bootloader validation output:

 Zyxel TRX Image 1 --> Found!  Header Checksum OK
 ============ZyXEL header information==================
         chipId             : MT7621A
         boardId            : NR7101
         modelId            : 07 01 00 01
         kernel_len         : (14177560)
         kernelChksum       : (0x8DD31F69)
         swVersionInt       : 1.00(ABUV.0)D1
         swVersionExt       : 1.00(ABUV.0)D1

 Zyxel TRX Image 2 --> Found!  Header Checksum OK
 ============ZyXEL header information==================
         chipId             : MT7621A
         boardId            : NR7101
         modelId            : 07 01 00 01
         kernel_len         : (14176660)
         kernelChksum       : (0x951A7637)
         swVersionInt       : 1.00(ABUV.0)D0
         swVersionExt       : 1.00(ABUV.0)D0

 =================================================
 Check image validation:
 Image1 Header Magic Number --> OK
 Image2 Header Magic Number --> OK
 Image1 Header Checksum --> OK
 Image2 Header Checksum --> OK
 Image1 Data Checksum --> OK
 Image2 Data Checksum --> OK
 Image1 Stable Flag --> Stable
 Image1 Try Counter --> 0
 Image1: OK
 Image2: OK

The coverage and algorithm for the kernelChksum field is unknown.
This field is not validated by the bootloader or the OEM firmware
upgrade tool. It is therefore set to a static value for now.

The swVersion fields contain free form string values.  The OEM firmware
use ZyXEL structured version numbers as shown above.  The strings are
not interpreted or validated on boot, so they can be repurposed for
anything we want the bootloader to display to the user.  But the OEM
web GUI fails to flash images with freeform strings.

The purpose of the other strings in the header is not known.  The
values appear to be static.  We assume they are fixed for now, until
we have other examples.  One of these strings is the platform name,
which is taken as an input parameter for support other members of
the device family.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Tested-by: Bjørn Mork <bjorn@mork.no>
(cherry picked from commit 48cad07a55)
2021-06-10 17:09:35 +02:00
Adrian Schmutzler
ec8fe0a189 treewide: make AddDepends/usb-serial selective
Make packages depending on usb-serial selective, so we do not have
to add kmod-usb-serial manually for every device.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 9397b22df1)
2021-06-08 22:50:32 +02:00
Felix Fietkau
4aae7eb3c0 wireless-regdb: update to version 2021.04.21
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit d76535c45e)
2021-06-08 20:44:12 +02:00
Hans Dedecker
3b4aac76b4 glibc: update to latest 2.33 HEAD (BZ #27892)
0ef0e6de7f powerpc: Fix handling of scv return error codes [BZ #27892]

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 507257778c)
2021-06-08 20:44:08 +02:00
Adrian Schmutzler
0eaff67b2a umbim: fix return value of proto_mbim_setup()
The variable name appears to be mistyped.

Suggested-by: Howard Chu <hyc@symas.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 6bc4c0ae3e)
2021-06-08 20:44:04 +02:00
Mark Carroll
ba5b98fcb8 x86: kernel: enable Fusion-MPT SAS driver
Compile in MPT SAS driver required to mount rootfs on some VMWare
systems (e.g. required for 1&1 IONOS).

Signed-off-by: Mark Carroll <git@markcarroll.net>
(cherry picked from commit 8716dda074)
2021-06-08 20:44:00 +02:00
Tomasz Maciej Nowak
f788dfdf55 ipq40xx: add uboot-envtools to default packages
When support for Luma WRTQ-329ACN was added, the instructions for
flashing this device include using tools from uboot-envtools package.
Unfortunately the OpenWrt buildroot system omits packages from
DEVICE_PACKAGES when CONFIG_TARGET_MULTI_PROFILE,
CONFIG_TARGET_PER_DEVICE_ROOTFS, CONFIG_TARGET_ALL_PROFILES are set. In
result the official images are without tools mentioned in the
instruction. The workoround for the fashing would be installing
uboot-envtools when booted with initramfs image, but not always the
access to internet is available. The other method would be to issue the
necesary command in U-Boot environment but some serial terminals default
configuration don't work well with pasting lines longer than 80 chars.
Therefore add uboot-envtools to default packages, which adds really
small flash footprint to rootfs, where increased size usually is not an
issue.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(cherry picked from commit 1984a6bbca)
2021-06-08 20:43:56 +02:00
Alex Henrie
0753cd9853 ipq806x: fix LAN and WAN port assignments on TP-Link AD7200
LAN port 4 was swapped with the WAN port and the remaining three LAN
ports were numbered in reverse order from their labels on the case.

Fixes: 1a775a4fd0 ("ipq806x: add support for TP-Link Talon AD7200")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
(cherry picked from commit 6fb27e8e6d)
2021-06-08 20:43:52 +02:00
Hauke Mehrtens
00d7a459f3 mac80211: Update to backports-5.10.42
The removed patches were integrated upstream.

The brcmf_driver_work workqueue was removed in brcmfmac with kernel
5.10.42, the asynchronous call was covered to a synchronous call. There
is no need to wait any more.
This part was removed manually from this patch:
brcm/860-brcmfmac-register-wiphy-s-during-module_init.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 04a260911c)
2021-06-06 17:54:58 +02:00
Hauke Mehrtens
b55d3d6904 kernel: bump 5.4 to 5.4.124
Manually rebased
  generic/hack-5.4/662-remove_pfifo_fast.patch
  ramips/patches-5.4/0048-asoc-add-mt7620-support.patch

All others updated automatically.

Compile-tested on: armvirt/64, x86/generic, ath79/generic, ramips/mt7621
Runtime-tested on: armvirt/64, x86/generic, ath79/generic

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-06-06 17:54:51 +02:00
Petr Štetiar
1b27d89d40 ubus: update to version 2021-06-03
This update contains following changes:

 * ubusd: protect against too-short messages
 * ubusd: add per-client tx queue limit
 * ubusd: convert tx_queue to linked list

Fixes: FS#1525
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 4f2243d40a)
2021-06-03 10:36:10 +02:00
Paul Spooren
c9a38e21a9 build/json: fix IMAGE_PREFIX and DEVICE_PACKAGES
These two variables were missing in the definition of
DEFAULT_DEVICE_VARS which caused them to contain wrong values, messing
up the resulting JSON files.

This patch adds the two variables IMAGE_PREFIX and DEVICE_PACKAGES to
DEFAULT_DEVICE_VARS.

Suggested-by: Baptiste Jonglez <git@bitsofnetworks.org>
Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-06-02 22:55:52 +02:00
Lech Perczak
6a5545006e rampis: use lzma-loader for ZTE MF283+
Without that, after merging support to master, the device fails to boot
due to LZMA decompression error:

3: System Boot system code via Flash.
raspi_read: from:80000 len:40
.   Image Name:   MIPS OpenWrt Linux-5.4.99
   Created:      2021-02-25  23:35:00 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1786664 Bytes =  1.7 MB
   Load Address: 80000000
   Entry Point:  80000000
raspi_read: from:80040 len:1b4328
............................   Verifying Checksum ... OK
   Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover

Use lzma-loader to fix it.

Fixes: 59d065c9f8 ("ramips: add support for ZTE MF283+")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>

(cherry picked from commit 410fb05b44)
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2021-06-02 21:29:16 +02:00
Lech Perczak
27bcde303b ramips: add support for ZTE MF283+
ZTE MF283+ is a dual-antenna LTE category 4 router, based on Ralink
RT3352 SoC, and built-in ZTE P685M PCIe MiniCard LTE modem.

Hardware highlighs:
- CPU: MIPS24KEc at 400MHz,
- RAM: 64MB DDR2,
- Flash: 16MB SPI,
- Ethernet: 4 10/100M port switch with VLAN support,
- Wireless: Dual-stream 802.11n (RT2860), with two internal antennas,
- WWAN: Built-in ZTE P685M modem, with two internal antennas and two
  switching SMA connectors for external antennas,
- FXS: Single ATA, with two connectors marked PHONE1 and PHONE2,
  internally wired in parallel by 0-Ohm resistors, handled entirely by
  internal WWAN modem.
- USB: internal miniPCIe slot for modem,
  unpopulated USB A connector on PCB.
- SIM slot for the WWAN modem.
- UART connector for the console (unpopulated) at 3.3V,
  pinout: 1: VCC, 2: TXD, 3: RXD, 4: GND,
  settings: 57600-8-N-1.
- LEDs: Power (fixed), WLAN, WWAN (RGB),
  phone (bicolor, controlled by modem), Signal,
  4 link/act LEDs for LAN1-4.
- Buttons: WPS, reset.

Installation:
As the modem is, for most of the time, provided by carriers, there is no
possibility to flash through web interface, only built-in FOTA update
and TFTP recovery are supported.

There are two installation methods:
(1) Using serial console and initramfs-kernel - recommended, as it
allows you to back up original firmware, or
(2) Using TFTP recovery - does not require disassembly.

(1) Using serial console:
To install OpenWrt, one needs to disassemble the
router and flash it via TFTP by using serial console:
- Locate unpopulated 4-pin header on the top of the board, near buttons.
- Connect UART adapter to the connector. Use 3.3V voltage level only,
  omit VCC connection. Pin 1 (VCC) is marked by square pad.
- Put your initramfs-kernel image in TFTP server directory.
- Power-up the device.
- Press "1" to load initramfs image to RAM.
- Enter IP address chosen for the device (defaults to 192.168.0.1).
- Enter TFTP server IP address (defaults to 192.168.0.22).
- Enter image filename as put inside TFTP server - something short,
  like firmware.bin is recommended.
- Hit enter to load the image. U-boot will store above values in
  persistent environment for next installation.
- If you ever might want to return to vendor firmware,
  BACK UP CONTENTS OF YOUR FLASH NOW.
  For this router, commonly used by mobile networks,
  plain vendor images are not officially available.
  To do so, copy contents of each /dev/mtd[0-3], "firmware" - mtd3 being the
  most important, and copy them over network to your PC. But in case
  anything goes wrong, PLEASE do back up ALL OF THEM.
- From under OpenWrt just booted, load the sysupgrade image to tmpfs,
  and execute sysupgrade.

(2) Using TFTP recovery
- Set your host IP to 192.168.0.22 - for example using:
sudo ip addr add 192.168.0.22/24 dev <interface>
- Set up a TFTP server on your machine
- Put the sysupgrade image in TFTP server root named as 'root_uImage'
  (no quotes), for example using tftpd:
  cp openwrt-ramips-rt305x-zte_mf283plus-squashfs-sysupgrade.bin /srv/tftp/root_uImage
- Power on the router holding BOTH Reset and WPS buttons held for around
  5 seconds, until after WWAN and Signal LEDs blink.
- Wait for OpenWrt to start booting up, this should take around a
  minute.

Return to original firmware:
Here, again there are two possibilities are possible, just like for
installation:
(1) Using initramfs-kernel image and serial console
(2) Using TFTP recovery

(1) Using initramfs-kernel image and serial console
- Boot OpenWrt initramfs-kernel image via TFTP the same as for
  installation.
- Copy over the backed up "firmware.bin" image of "mtd3" to /tmp/
- Use "mtd write /tmp/firmware.bin /dev/mtd3", where firmware.bin is
  your backup taken before OpenWrt installation, and /dev/mtd3 is the
  "firmware" partition.

(2) Using TFTP recovery
- Follow the same steps as for installation, but replacing 'root_uImage'
  with firmware backup you took during installation, or by vendor
  firmware obtained elsewhere.

A few quirks of the device, noted from my instance:
- Wired and wireless MAC addresses written in flash are the same,
  despite being in separate locations.
- Power LED is hardwired to 3.3V, so there is no status LED per se, and
  WLAN LED is controlled by WLAN driver, so I had to hijack 3G/4G LED
  for status - original firmware also does this in bootup.
- FXS subsystem and its LED is controlled by the
  modem, so it work independently of OpenWrt.
  Tested to work even before OpenWrt booted.
  I managed to open up modem's shell via ADB,
  and found from its kernel logs, that FXS and its LED is indeed controlled
  by modem.
- While finding LEDs, I had no GPL source drop from ZTE, so I had to probe for
  each and every one of them manually, so this might not be complete -
  it looks like bicolor LED is used for FXS, possibly to support
  dual-ported variant in other device sharing the PCB.
- Flash performance is very low, despite enabling 50MHz clock and fast
  read command, due to using 4k sectors throughout the target. I decided
  to keep it at the moment, to avoid breaking existing devices - I
  identified one potentially affected, should this be limited to under
  4MB of Flash. The difference between sysupgrade durations is whopping
  3min vs 8min, so this is worth pursuing.

In vendor firmware, WWAN LED behaviour is as follows, citing the manual:
- red - no registration,
- green - 3G,
- blue - 4G.
Blinking indicates activity, so netdev trigger mapped from wwan0 to blue:wwan
looks reasonable at the moment, for full replacement, a script similar to
"rssileds" would need to be developed.

Behaviour of "Signal LED" in vendor firmware is as follows:
- Off - no signal,
- Blinking - poor coverage
- Solid - good coverage.

A few more details on the built-in LTE modem:
Modem is not fully supported upstream in Linux - only two CDC ports
(DIAG and one for QMI) probe. I sent patches upstream to add required device
IDs for full support.
The mapping of USB functions is as follows:
- CDC (QCDM) - dedicated to comunicating with proprietary Qualcomm tools.
- CDC (PCUI) - not supported by upstream 'option' driver yet. Patch
  submitted upstream.
- CDC (Modem) - Exactly the same as above
- QMI - A patch is sent upstream to add device ID, with that in place,
  uqmi did connect successfully, once I selected correct PDP context
  type for my SIM (IPv4-only, not default IPv4v6).
- ADB - self-explanatory, one can access the ADB shell with a device ID
  added to 51-android.rules like so:

SUBSYSTEM!="usb", GOTO="android_usb_rules_end"
LABEL="android_usb_rules_begin"
SUBSYSTEM=="usb", ATTR{idVendor}=="19d2", ATTR{idProduct}=="1275", ENV{adb_user}="yes"
ENV{adb_user}=="yes", MODE="0660", GROUP="plugdev", TAG+="uaccess"
LABEL="android_usb_rules_end"

While not really needed in OpenWrt, it might come useful if one decides to
move the modem to their PC to hack it further, insides seem to be pretty
interesting. ADB also works well from within OpenWrt without that. O
course it isn't needed for normal operation, so I left it out of
DEVICE_PACKAGES.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
[remove kmod-usb-ledtrig-usbport, take merged upstream patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

(cherry picked from commit 59d065c9f8)
[Manually remove no longer needed patches for modem]
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2021-06-02 21:29:16 +02:00
Kuan-Yi Li
fc0fd54738 kernel: bump 5.4 to 5.4.123
Removed because in upstream
  generic/pending-5.4/770-02-net-ethernet-mtk_eth_soc-fix-rx-vlan-offload.patch

All others updated automatically.

Runtime-tested on bcm27xx/bcm2711.

Fixes: FS#3085
Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2021-05-30 23:45:49 +02:00
François Chavant
1a41b88803 build: kernel2minor: work around path length limit
When building for MikroTik devices the kernel2minor tool will sometimes
fail with:

  Can't get lstat from kernel file!: No such file or directory.

This is because kernel2minor expects paths no longer than 250 chars.
To work around this the include/image-commands.mk has been modified
to copy the kernel to a temporary file (/tmp/tmp.XXXXXXXXXX) before
calling kernel2minor.

Signed-off-by: François Chavant <francois@chavant.info>
(cherry picked from commit 5a9608102b)
2021-05-30 22:32:50 +02:00
Hauke Mehrtens
d484366a9e OpenWrt v21.02.0-rc2: revert to branch defaults
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-05-29 20:02:03 +02:00
171 changed files with 3250 additions and 2695 deletions

View File

@@ -57,8 +57,8 @@ packages to OpenWrt, please find the fitting repository below.
* [OpenWrt Packages](https://github.com/openwrt/packages): Community repository
of ported packages.
* [OpenWrt Routing](https://github.com/openwrt-routing/packages): Packages
specifically focused on (mesh) routing.
* [OpenWrt Routing](https://github.com/openwrt/routing): Packages specifically
focused on (mesh) routing.
## Support Information
@@ -74,13 +74,13 @@ For a list of supported devices see the [OpenWrt Hardware Database](https://open
### Support Community
* [Forum](https://forum.openwrt.org): For usage, projects, discussions and hardware advise.
* [Support Chat](https://webchat.freenode.net/#openwrt): Channel `#openwrt` on freenode.net.
* [Support Chat](https://webchat.oftc.net/#openwrt): Channel `#openwrt` on **oftc.net**.
### Developer Community
* [Bug Reports](https://bugs.openwrt.org): Report bugs in OpenWrt
* [Dev Mailing List](https://lists.openwrt.org/mailman/listinfo/openwrt-devel): Send patches
* [Dev Chat](https://webchat.freenode.net/#openwrt-devel): Channel `#openwrt-devel` on freenode.net.
* [Dev Chat](https://webchat.oftc.net/#openwrt-devel): Channel `#openwrt-devel` on **oftc.net**.
## License

View File

@@ -1,4 +1,4 @@
src-git packages https://git.openwrt.org/feed/packages.git^920c4f29c55d26d8d602c1357ffd6b23a0df5914
src-git luci https://git.openwrt.org/project/luci.git^09329fe7bb6571032570b21541c1991a3443cc07
src-git routing https://git.openwrt.org/feed/routing.git^57533a25e84932a7e50b8483843c840f0924bc0c
src-git telephony https://git.openwrt.org/feed/telephony.git^04e1378baf2b720395d284f661240e6f7f9cab35
src-git packages https://git.openwrt.org/feed/packages.git^e738d2faf1c4ed68094f1d5da075d2d92fb35049
src-git luci https://git.openwrt.org/project/luci.git^2778366916f815d4af9534218bef10aa3aad3c01
src-git routing https://git.openwrt.org/feed/routing.git^2baff33918c089fd3744c7192f8ae7a29c47a8d7
src-git telephony https://git.openwrt.org/feed/telephony.git^ee64ec42e981e1f9e5a21cd3478497987ff76680

View File

@@ -240,8 +240,11 @@ define Build/jffs2
endef
define Build/kernel2minor
kernel2minor -k $@ -r $@.new $(1)
mv $@.new $@
$(eval temp_file := $(shell mktemp))
cp $@ $(temp_file)
kernel2minor -k $(temp_file) -r $(temp_file).new $(1)
mv $(temp_file).new $@
rm -f $(temp_file)
endef
define Build/kernel-bin

View File

@@ -419,7 +419,7 @@ DEFAULT_DEVICE_VARS := \
DEVICE_DTS_CONFIG DEVICE_DTS_DIR DEVICE_FDT_NUM SOC BOARD_NAME \
UIMAGE_MAGIC UIMAGE_NAME \
SUPPORTED_DEVICES IMAGE_METADATA KERNEL_ENTRY KERNEL_LOADADDR \
UBOOT_PATH IMAGE_SIZE \
IMAGE_PREFIX DEVICE_PACKAGES UBOOT_PATH IMAGE_SIZE \
DEVICE_COMPAT_VERSION DEVICE_COMPAT_MESSAGE \
DEVICE_VENDOR DEVICE_MODEL DEVICE_VARIANT \
DEVICE_ALT0_VENDOR DEVICE_ALT0_MODEL DEVICE_ALT0_VARIANT \

View File

@@ -6,9 +6,9 @@ ifdef CONFIG_TESTING_KERNEL
KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
LINUX_VERSION-5.4 = .119
LINUX_VERSION-5.4 = .124
LINUX_KERNEL_HASH-5.4.119 = 71e7decf1e8149a8aed88d30df4f2a62a6c6b168111de6b261685ac7c0ecb2a0
LINUX_KERNEL_HASH-5.4.124 = f7f29dda2b042d7b5986d18274413131cf70e17288c05e9a683df1f46c507d82
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

View File

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.0-rc2)
VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.0-rc3)
VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16122-c2139eef27)
VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16172-2aba3e9784)
VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.0-rc2)
VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.0-rc3)
VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

View File

@@ -183,7 +183,7 @@ if VERSIONOPT
config VERSION_REPO
string
prompt "Release repository"
default "https://downloads.openwrt.org/releases/21.02.0-rc2"
default "https://downloads.openwrt.org/releases/21.02.0-rc3"
help
This is the repository address embedded in the image, it defaults
to the trunk snapshot repo; the url may contain the following placeholders:

View File

@@ -26,6 +26,10 @@ allnet,all0256n-8m|\
allnet,all5002)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
;;
ampedwireless,ally-00x19k|\
ampedwireless,ally-r1900k)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" "4"
;;
buffalo,wsr-1166dhp|\
buffalo,wsr-600dhp|\
mediatek,linkit-smart-7688|\
@@ -34,7 +38,8 @@ xiaomi,mi-router-3g-v2|\
xiaomi,mi-router-4a-gigabit|\
xiaomi,mi-router-4c|\
xiaomi,miwifi-nano|\
zbtlink,zbt-wg2626)
zbtlink,zbt-wg2626|\
zte,mf283plus)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
;;
hootoo,ht-tm05|\
@@ -43,9 +48,13 @@ ravpower,rp-wd03)
[ -n "$idx" ] && \
ubootenv_add_uci_config "/dev/mtd$idx" "0x4000" "0x1000" "0x1000"
;;
jcg,q20)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
;;
linksys,ea7300-v1|\
linksys,ea7300-v2|\
linksys,ea7500-v2|\
linksys,ea8100-v1|\
xiaomi,mi-router-3g|\
xiaomi,mi-router-3-pro|\
xiaomi,mi-router-4|\
@@ -53,6 +62,11 @@ xiaomi,mi-router-ac2100|\
xiaomi,redmi-router-ac2100)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
;;
zyxel,nr7101)
idx="$(find_mtd_index Config)"
[ -n "$idx" ] && \
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x1000" "0x80000"
;;
esac
config_load ubootenv

View File

@@ -1,12 +1,12 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=wireless-regdb
PKG_VERSION:=2020.11.20
PKG_VERSION:=2021.04.21
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
PKG_HASH:=b4164490d82ff7b0086e812ac42ab27baf57be24324d4c0ee1c5dd6ba27f2a52
PKG_HASH:=9e4c02b2a9710df4dbdb327c39612e8cbbae6495987afeddaebab28c1ea3d8fa
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>

View File

@@ -561,7 +561,7 @@ $(eval $(call KernelPackage,usb-serial))
define AddDepends/usb-serial
SUBMENU:=$(USB_MENU)
DEPENDS+=kmod-usb-serial $(1)
DEPENDS+=+kmod-usb-serial $(1)
endef

View File

@@ -10,10 +10,10 @@ include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=mac80211
PKG_VERSION:=5.10.34-1
PKG_VERSION:=5.10.42-1
PKG_RELEASE:=1
PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.10.34/
PKG_HASH:=03c4ca6bf47d4e50b91b61bc2943a98c788439e56ce2b4080bc4c94141c2c15b
PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.10.42/
PKG_HASH:=6876520105240844fdb32d1dcdf2bfdea291a37a96f16c892fda3776ba714fcb
PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)

View File

@@ -37,7 +37,7 @@
void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature);
--- a/local-symbols
+++ b/local-symbols
@@ -143,6 +143,7 @@ ATH10K_SNOC=
@@ -142,6 +142,7 @@ ATH10K_SNOC=
ATH10K_DEBUG=
ATH10K_DEBUGFS=
ATH10K_SPECTRAL=

View File

@@ -1,180 +0,0 @@
From: Wen Gong <wgong@codeaurora.org>
Date: Tue, 11 May 2021 20:02:52 +0200
Subject: [PATCH] ath10k: add CCMP PN replay protection for fragmented
frames for PCIe
PN replay check for not fragmented frames is finished in the firmware,
but this was not done for fragmented frames when ath10k is used with
QCA6174/QCA6377 PCIe. mac80211 has the function
ieee80211_rx_h_defragment() for PN replay check for fragmented frames,
but this does not get checked with QCA6174 due to the
ieee80211_has_protected() condition not matching the cleared Protected
bit case.
Validate the PN of received fragmented frames within ath10k when CCMP is
used and drop the fragment if the PN is not correct (incremented by
exactly one from the previous fragment). This applies only for
QCA6174/QCA6377 PCIe.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -846,6 +846,7 @@ enum htt_security_types {
#define ATH10K_HTT_TXRX_PEER_SECURITY_MAX 2
#define ATH10K_TXRX_NUM_EXT_TIDS 19
+#define ATH10K_TXRX_NON_QOS_TID 16
enum htt_security_flags {
#define HTT_SECURITY_TYPE_MASK 0x7F
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1746,16 +1746,87 @@ static void ath10k_htt_rx_h_csum_offload
msdu->ip_summed = ath10k_htt_rx_get_csum_state(msdu);
}
+static u64 ath10k_htt_rx_h_get_pn(struct ath10k *ar, struct sk_buff *skb,
+ u16 offset,
+ enum htt_rx_mpdu_encrypt_type enctype)
+{
+ struct ieee80211_hdr *hdr;
+ u64 pn = 0;
+ u8 *ehdr;
+
+ hdr = (struct ieee80211_hdr *)(skb->data + offset);
+ ehdr = skb->data + offset + ieee80211_hdrlen(hdr->frame_control);
+
+ if (enctype == HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2) {
+ pn = ehdr[0];
+ pn |= (u64)ehdr[1] << 8;
+ pn |= (u64)ehdr[4] << 16;
+ pn |= (u64)ehdr[5] << 24;
+ pn |= (u64)ehdr[6] << 32;
+ pn |= (u64)ehdr[7] << 40;
+ }
+ return pn;
+}
+
+static bool ath10k_htt_rx_h_frag_pn_check(struct ath10k *ar,
+ struct sk_buff *skb,
+ u16 peer_id,
+ u16 offset,
+ enum htt_rx_mpdu_encrypt_type enctype)
+{
+ struct ath10k_peer *peer;
+ union htt_rx_pn_t *last_pn, new_pn = {0};
+ struct ieee80211_hdr *hdr;
+ bool more_frags;
+ u8 tid, frag_number;
+ u32 seq;
+
+ peer = ath10k_peer_find_by_id(ar, peer_id);
+ if (!peer) {
+ ath10k_dbg(ar, ATH10K_DBG_HTT, "invalid peer for frag pn check\n");
+ return false;
+ }
+
+ hdr = (struct ieee80211_hdr *)(skb->data + offset);
+ if (ieee80211_is_data_qos(hdr->frame_control))
+ tid = ieee80211_get_tid(hdr);
+ else
+ tid = ATH10K_TXRX_NON_QOS_TID;
+
+ last_pn = &peer->frag_tids_last_pn[tid];
+ new_pn.pn48 = ath10k_htt_rx_h_get_pn(ar, skb, offset, enctype);
+ more_frags = ieee80211_has_morefrags(hdr->frame_control);
+ frag_number = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
+ seq = (__le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
+
+ if (frag_number == 0) {
+ last_pn->pn48 = new_pn.pn48;
+ peer->frag_tids_seq[tid] = seq;
+ } else {
+ if (seq != peer->frag_tids_seq[tid])
+ return false;
+
+ if (new_pn.pn48 != last_pn->pn48 + 1)
+ return false;
+
+ last_pn->pn48 = new_pn.pn48;
+ }
+
+ return true;
+}
+
static void ath10k_htt_rx_h_mpdu(struct ath10k *ar,
struct sk_buff_head *amsdu,
struct ieee80211_rx_status *status,
bool fill_crypt_header,
u8 *rx_hdr,
- enum ath10k_pkt_rx_err *err)
+ enum ath10k_pkt_rx_err *err,
+ u16 peer_id,
+ bool frag)
{
struct sk_buff *first;
struct sk_buff *last;
- struct sk_buff *msdu;
+ struct sk_buff *msdu, *temp;
struct htt_rx_desc *rxd;
struct ieee80211_hdr *hdr;
enum htt_rx_mpdu_encrypt_type enctype;
@@ -1768,6 +1839,7 @@ static void ath10k_htt_rx_h_mpdu(struct
bool is_decrypted;
bool is_mgmt;
u32 attention;
+ bool frag_pn_check = true;
if (skb_queue_empty(amsdu))
return;
@@ -1866,6 +1938,24 @@ static void ath10k_htt_rx_h_mpdu(struct
}
skb_queue_walk(amsdu, msdu) {
+ if (frag && !fill_crypt_header && is_decrypted &&
+ enctype == HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2)
+ frag_pn_check = ath10k_htt_rx_h_frag_pn_check(ar,
+ msdu,
+ peer_id,
+ 0,
+ enctype);
+
+ if (!frag_pn_check) {
+ /* Discard the fragment with invalid PN */
+ temp = msdu->prev;
+ __skb_unlink(msdu, amsdu);
+ dev_kfree_skb_any(msdu);
+ msdu = temp;
+ frag_pn_check = true;
+ continue;
+ }
+
ath10k_htt_rx_h_csum_offload(msdu);
ath10k_htt_rx_h_undecap(ar, msdu, status, first_hdr, enctype,
is_decrypted);
@@ -2071,7 +2161,8 @@ static int ath10k_htt_rx_handle_amsdu(st
ath10k_htt_rx_h_unchain(ar, &amsdu, &drop_cnt, &unchain_cnt);
ath10k_htt_rx_h_filter(ar, &amsdu, rx_status, &drop_cnt_filter);
- ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status, true, first_hdr, &err);
+ ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status, true, first_hdr, &err, 0,
+ false);
msdus_to_queue = skb_queue_len(&amsdu);
ath10k_htt_rx_h_enqueue(ar, &amsdu, rx_status);
@@ -3027,7 +3118,7 @@ static int ath10k_htt_rx_in_ord_ind(stru
ath10k_htt_rx_h_ppdu(ar, &amsdu, status, vdev_id);
ath10k_htt_rx_h_filter(ar, &amsdu, status, NULL);
ath10k_htt_rx_h_mpdu(ar, &amsdu, status, false, NULL,
- NULL);
+ NULL, peer_id, frag);
ath10k_htt_rx_h_enqueue(ar, &amsdu, status);
break;
case -EAGAIN:

View File

@@ -1,66 +0,0 @@
From: Wen Gong <wgong@codeaurora.org>
Date: Tue, 11 May 2021 20:02:53 +0200
Subject: [PATCH] ath10k: drop fragments with multicast DA for PCIe
Fragmentation is not used with multicast frames. Discard unexpected
fragments with multicast DA. This fixes CVE-2020-26145.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1768,6 +1768,16 @@ static u64 ath10k_htt_rx_h_get_pn(struct
return pn;
}
+static bool ath10k_htt_rx_h_frag_multicast_check(struct ath10k *ar,
+ struct sk_buff *skb,
+ u16 offset)
+{
+ struct ieee80211_hdr *hdr;
+
+ hdr = (struct ieee80211_hdr *)(skb->data + offset);
+ return !is_multicast_ether_addr(hdr->addr1);
+}
+
static bool ath10k_htt_rx_h_frag_pn_check(struct ath10k *ar,
struct sk_buff *skb,
u16 peer_id,
@@ -1839,7 +1849,7 @@ static void ath10k_htt_rx_h_mpdu(struct
bool is_decrypted;
bool is_mgmt;
u32 attention;
- bool frag_pn_check = true;
+ bool frag_pn_check = true, multicast_check = true;
if (skb_queue_empty(amsdu))
return;
@@ -1946,13 +1956,20 @@ static void ath10k_htt_rx_h_mpdu(struct
0,
enctype);
- if (!frag_pn_check) {
- /* Discard the fragment with invalid PN */
+ if (frag)
+ multicast_check = ath10k_htt_rx_h_frag_multicast_check(ar,
+ msdu,
+ 0);
+
+ if (!frag_pn_check || !multicast_check) {
+ /* Discard the fragment with invalid PN or multicast DA
+ */
temp = msdu->prev;
__skb_unlink(msdu, amsdu);
dev_kfree_skb_any(msdu);
msdu = temp;
frag_pn_check = true;
+ multicast_check = true;
continue;
}

View File

@@ -1,40 +0,0 @@
From: Wen Gong <wgong@codeaurora.org>
Date: Tue, 11 May 2021 20:02:54 +0200
Subject: [PATCH] ath10k: drop fragments with multicast DA for SDIO
Fragmentation is not used with multicast frames. Discard unexpected
fragments with multicast DA. This fixes CVE-2020-26145.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2617,6 +2617,13 @@ static bool ath10k_htt_rx_proc_rx_frag_i
rx_desc = (struct htt_hl_rx_desc *)(skb->data + tot_hdr_len);
rx_desc_info = __le32_to_cpu(rx_desc->info);
+ hdr = (struct ieee80211_hdr *)((u8 *)rx_desc + rx_hl->fw_desc.len);
+
+ if (is_multicast_ether_addr(hdr->addr1)) {
+ /* Discard the fragment with multicast DA */
+ goto err;
+ }
+
if (!MS(rx_desc_info, HTT_RX_DESC_HL_INFO_ENCRYPTED)) {
spin_unlock_bh(&ar->data_lock);
return ath10k_htt_rx_proc_rx_ind_hl(htt, &resp->rx_ind_hl, skb,
@@ -2624,8 +2631,6 @@ static bool ath10k_htt_rx_proc_rx_frag_i
HTT_RX_NON_TKIP_MIC);
}
- hdr = (struct ieee80211_hdr *)((u8 *)rx_desc + rx_hl->fw_desc.len);
-
if (ieee80211_has_retry(hdr->frame_control))
goto err;

View File

@@ -1,54 +0,0 @@
From: Wen Gong <wgong@codeaurora.org>
Date: Tue, 11 May 2021 20:02:55 +0200
Subject: [PATCH] ath10k: drop MPDU which has discard flag set by firmware
for SDIO
When the discard flag is set by the firmware for an MPDU, it should be
dropped. This allows a mitigation for CVE-2020-24588 to be implemented
in the firmware.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2312,6 +2312,11 @@ static bool ath10k_htt_rx_proc_rx_ind_hl
fw_desc = &rx->fw_desc;
rx_desc_len = fw_desc->len;
+ if (fw_desc->u.bits.discard) {
+ ath10k_dbg(ar, ATH10K_DBG_HTT, "htt discard mpdu\n");
+ goto err;
+ }
+
/* I have not yet seen any case where num_mpdu_ranges > 1.
* qcacld does not seem handle that case either, so we introduce the
* same limitiation here as well.
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -1282,7 +1282,19 @@ struct fw_rx_desc_base {
#define FW_RX_DESC_UDP (1 << 6)
struct fw_rx_desc_hl {
- u8 info0;
+ union {
+ struct {
+ u8 discard:1,
+ forward:1,
+ any_err:1,
+ dup_err:1,
+ reserved:1,
+ inspect:1,
+ extension:2;
+ } bits;
+ u8 info0;
+ } u;
+
u8 version;
u8 len;
u8 flags;

View File

@@ -1,48 +0,0 @@
From: Wen Gong <wgong@codeaurora.org>
Date: Tue, 11 May 2021 20:02:56 +0200
Subject: [PATCH] ath10k: Fix TKIP Michael MIC verification for PCIe
TKIP Michael MIC was not verified properly for PCIe cases since the
validation steps in ieee80211_rx_h_michael_mic_verify() in mac80211 did
not get fully executed due to unexpected flag values in
ieee80211_rx_status.
Fix this by setting the flags property to meet mac80211 expectations for
performing Michael MIC validation there. This fixes CVE-2020-26141. It
does the same as ath10k_htt_rx_proc_rx_ind_hl() for SDIO which passed
MIC verification case. This applies only to QCA6174/QCA9377 PCIe.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1974,6 +1974,11 @@ static void ath10k_htt_rx_h_mpdu(struct
}
ath10k_htt_rx_h_csum_offload(msdu);
+
+ if (frag && !fill_crypt_header &&
+ enctype == HTT_RX_MPDU_ENCRYPT_TKIP_WPA)
+ status->flag &= ~RX_FLAG_MMIC_STRIPPED;
+
ath10k_htt_rx_h_undecap(ar, msdu, status, first_hdr, enctype,
is_decrypted);
@@ -1991,6 +1996,11 @@ static void ath10k_htt_rx_h_mpdu(struct
hdr = (void *)msdu->data;
hdr->frame_control &= ~__cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+
+ if (frag && !fill_crypt_header &&
+ enctype == HTT_RX_MPDU_ENCRYPT_TKIP_WPA)
+ status->flag &= ~RX_FLAG_IV_STRIPPED &
+ ~RX_FLAG_MMIC_STRIPPED;
}
}

View File

@@ -1,109 +0,0 @@
From: Sriram R <srirrama@codeaurora.org>
Date: Tue, 11 May 2021 20:02:57 +0200
Subject: [PATCH] ath10k: Validate first subframe of A-MSDU before
processing the list
In certain scenarios a normal MSDU can be received as an A-MSDU when
the A-MSDU present bit of a QoS header gets flipped during reception.
Since this bit is unauthenticated, the hardware crypto engine can pass
the frame to the driver without any error indication.
This could result in processing unintended subframes collected in the
A-MSDU list. Hence, validate A-MSDU list by checking if the first frame
has a valid subframe header.
Comparing the non-aggregated MSDU and an A-MSDU, the fields of the first
subframe DA matches the LLC/SNAP header fields of a normal MSDU.
In order to avoid processing such frames, add a validation to
filter such A-MSDU frames where the first subframe header DA matches
with the LLC/SNAP header pattern.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.10-00047
Cc: stable@vger.kernel.org
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2108,14 +2108,62 @@ static void ath10k_htt_rx_h_unchain(stru
ath10k_unchain_msdu(amsdu, unchain_cnt);
}
+static bool ath10k_htt_rx_validate_amsdu(struct ath10k *ar,
+ struct sk_buff_head *amsdu)
+{
+ u8 *subframe_hdr;
+ struct sk_buff *first;
+ bool is_first, is_last;
+ struct htt_rx_desc *rxd;
+ struct ieee80211_hdr *hdr;
+ size_t hdr_len, crypto_len;
+ enum htt_rx_mpdu_encrypt_type enctype;
+ int bytes_aligned = ar->hw_params.decap_align_bytes;
+
+ first = skb_peek(amsdu);
+
+ rxd = (void *)first->data - sizeof(*rxd);
+ hdr = (void *)rxd->rx_hdr_status;
+
+ is_first = !!(rxd->msdu_end.common.info0 &
+ __cpu_to_le32(RX_MSDU_END_INFO0_FIRST_MSDU));
+ is_last = !!(rxd->msdu_end.common.info0 &
+ __cpu_to_le32(RX_MSDU_END_INFO0_LAST_MSDU));
+
+ /* Return in case of non-aggregated msdu */
+ if (is_first && is_last)
+ return true;
+
+ /* First msdu flag is not set for the first msdu of the list */
+ if (!is_first)
+ return false;
+
+ enctype = MS(__le32_to_cpu(rxd->mpdu_start.info0),
+ RX_MPDU_START_INFO0_ENCRYPT_TYPE);
+
+ hdr_len = ieee80211_hdrlen(hdr->frame_control);
+ crypto_len = ath10k_htt_rx_crypto_param_len(ar, enctype);
+
+ subframe_hdr = (u8 *)hdr + round_up(hdr_len, bytes_aligned) +
+ crypto_len;
+
+ /* Validate if the amsdu has a proper first subframe.
+ * There are chances a single msdu can be received as amsdu when
+ * the unauthenticated amsdu flag of a QoS header
+ * gets flipped in non-SPP AMSDU's, in such cases the first
+ * subframe has llc/snap header in place of a valid da.
+ * return false if the da matches rfc1042 pattern
+ */
+ if (ether_addr_equal(subframe_hdr, rfc1042_header))
+ return false;
+
+ return true;
+}
+
static bool ath10k_htt_rx_amsdu_allowed(struct ath10k *ar,
struct sk_buff_head *amsdu,
struct ieee80211_rx_status *rx_status)
{
- /* FIXME: It might be a good idea to do some fuzzy-testing to drop
- * invalid/dangerous frames.
- */
-
if (!rx_status->freq) {
ath10k_dbg(ar, ATH10K_DBG_HTT, "no channel configured; ignoring frame(s)!\n");
return false;
@@ -2126,6 +2174,11 @@ static bool ath10k_htt_rx_amsdu_allowed(
return false;
}
+ if (!ath10k_htt_rx_validate_amsdu(ar, amsdu)) {
+ ath10k_dbg(ar, ATH10K_DBG_HTT, "invalid amsdu received\n");
+ return false;
+ }
+
return true;
}

View File

@@ -82,7 +82,7 @@
help
--- a/local-symbols
+++ b/local-symbols
@@ -86,6 +86,7 @@ ADM8211=
@@ -85,6 +85,7 @@ ADM8211=
ATH_COMMON=
WLAN_VENDOR_ATH=
ATH_DEBUG=

View File

@@ -371,7 +371,7 @@
--- a/local-symbols
+++ b/local-symbols
@@ -113,6 +113,7 @@ ATH9K_WOW=
@@ -112,6 +112,7 @@ ATH9K_WOW=
ATH9K_RFKILL=
ATH9K_CHANNEL_CONTEXT=
ATH9K_PCOEM=

View File

@@ -114,7 +114,7 @@ v13:
ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o
--- a/local-symbols
+++ b/local-symbols
@@ -146,6 +146,7 @@ ATH10K_DEBUG=
@@ -145,6 +145,7 @@ ATH10K_DEBUG=
ATH10K_DEBUGFS=
ATH10K_SPECTRAL=
ATH10K_THERMAL=
@@ -456,7 +456,7 @@ v13:
{
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -4591,6 +4591,8 @@ static const struct wmi_ops wmi_tlv_ops
@@ -4594,6 +4594,8 @@ static const struct wmi_ops wmi_tlv_ops
.gen_echo = ath10k_wmi_tlv_op_gen_echo,
.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,

View File

@@ -11,16 +11,6 @@ module loads successfully.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -1557,6 +1557,7 @@ int __init brcmf_core_init(void)
{
if (!schedule_work(&brcmf_driver_work))
return -EBUSY;
+ flush_work(&brcmf_driver_work);
return 0;
}
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -431,6 +431,7 @@ struct brcmf_fw {

View File

@@ -55,8 +55,8 @@
- echo "" ;\
- done \
- ) > Kconfig.kernel ;\
- kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion | \
- sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d') ;\
- kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) M=$(BACKPORT_DIR) \
- kernelversion | sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d');\
- test "$$kver" != "" || echo "Kernel version parse failed!" ;\
- test "$$kver" != "" ;\
- kvers="$$(seq 14 39 | sed 's/^/2.6./')" ;\
@@ -112,8 +112,8 @@
+ @echo " done."
+
+Kconfig.versions: Kconfig.kernel
+ @kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion | \
+ sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d') ;\
+ @kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) M=$(BACKPORT_DIR) \
+ kernelversion | sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d');\
+ test "$$kver" != "" || echo "Kernel version parse failed!" ;\
+ test "$$kver" != "" ;\
+ kvers="$$(seq 14 39 | sed 's/^/2.6./')" ;\

View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -5694,6 +5694,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
@@ -5695,6 +5695,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API));
static const struct pci_device_id mwl8k_pci_id_table[] = {

View File

@@ -1,6 +1,6 @@
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -6279,6 +6279,8 @@ static int mwl8k_probe(struct pci_dev *p
@@ -6280,6 +6280,8 @@ static int mwl8k_probe(struct pci_dev *p
priv->running_bsses = 0;
@@ -9,7 +9,7 @@
return rc;
err_stop_firmware:
@@ -6312,8 +6314,6 @@ static void mwl8k_remove(struct pci_dev
@@ -6313,8 +6315,6 @@ static void mwl8k_remove(struct pci_dev
return;
priv = hw->priv;

View File

@@ -1,6 +1,6 @@
--- a/local-symbols
+++ b/local-symbols
@@ -333,6 +333,7 @@ RT2X00_LIB_FIRMWARE=
@@ -332,6 +332,7 @@ RT2X00_LIB_FIRMWARE=
RT2X00_LIB_CRYPTO=
RT2X00_LIB_LEDS=
RT2X00_LIB_DEBUGFS=

View File

@@ -379,7 +379,7 @@
#endif /* AES_GCM_H */
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -311,7 +311,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
@@ -312,7 +312,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
}
@@ -389,7 +389,7 @@
{
__le16 mask_fc;
int a4_included, mgmt;
@@ -341,14 +342,8 @@ static void ccmp_special_blocks(struct s
@@ -342,14 +343,8 @@ static void ccmp_special_blocks(struct s
else
qos_tid = 0;
@@ -406,7 +406,7 @@
/* Nonce: Nonce Flags | A2 | PN
* Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
@@ -356,6 +351,8 @@ static void ccmp_special_blocks(struct s
@@ -357,6 +352,8 @@ static void ccmp_special_blocks(struct s
b_0[1] = qos_tid | (mgmt << 4);
memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
@@ -415,7 +415,7 @@
/* AAD (extra authenticate-only data) / masked 802.11 header
* FC | A1 | A2 | A3 | SC | [A4] | [QC] */
@@ -412,7 +409,7 @@ static int ccmp_encrypt_skb(struct ieee8
@@ -413,7 +410,7 @@ static int ccmp_encrypt_skb(struct ieee8
u8 *pos;
u8 pn[6];
u64 pn64;
@@ -424,7 +424,7 @@
u8 b_0[AES_BLOCK_SIZE];
if (info->control.hw_key &&
@@ -467,9 +464,11 @@ static int ccmp_encrypt_skb(struct ieee8
@@ -468,9 +465,11 @@ static int ccmp_encrypt_skb(struct ieee8
return 0;
pos += IEEE80211_CCMP_HDR_LEN;
@@ -439,7 +439,7 @@
}
@@ -542,13 +541,13 @@ ieee80211_crypto_ccmp_decrypt(struct iee
@@ -543,13 +542,13 @@ ieee80211_crypto_ccmp_decrypt(struct iee
u8 aad[2 * AES_BLOCK_SIZE];
u8 b_0[AES_BLOCK_SIZE];
/* hardware didn't decrypt/verify MIC */
@@ -455,7 +455,7 @@
return RX_DROP_UNUSABLE;
}
@@ -643,7 +642,7 @@ static int gcmp_encrypt_skb(struct ieee8
@@ -646,7 +645,7 @@ static int gcmp_encrypt_skb(struct ieee8
u8 *pos;
u8 pn[6];
u64 pn64;
@@ -464,7 +464,7 @@
u8 j_0[AES_BLOCK_SIZE];
if (info->control.hw_key &&
@@ -700,8 +699,10 @@ static int gcmp_encrypt_skb(struct ieee8
@@ -703,8 +702,10 @@ static int gcmp_encrypt_skb(struct ieee8
pos += IEEE80211_GCMP_HDR_LEN;
gcmp_special_blocks(skb, pn, j_0, aad);
@@ -477,7 +477,7 @@
}
ieee80211_tx_result
@@ -1128,9 +1129,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct
@@ -1133,9 +1134,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct
struct ieee80211_key *key = tx->key;
struct ieee80211_mmie_16 *mmie;
struct ieee80211_hdr *hdr;
@@ -489,7 +489,7 @@
if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
return TX_DROP;
@@ -1176,7 +1177,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
@@ -1181,7 +1182,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_key *key = rx->key;
struct ieee80211_mmie_16 *mmie;

View File

@@ -18,7 +18,7 @@
static int ieee80211_ifa6_changed(struct notifier_block *nb,
unsigned long data, void *arg)
{
@@ -1312,14 +1312,14 @@ int ieee80211_register_hw(struct ieee802
@@ -1315,14 +1315,14 @@ int ieee80211_register_hw(struct ieee802
rtnl_unlock();
@@ -35,7 +35,7 @@
local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
result = register_inet6addr_notifier(&local->ifa6_notifier);
if (result)
@@ -1328,13 +1328,13 @@ int ieee80211_register_hw(struct ieee802
@@ -1331,13 +1331,13 @@ int ieee80211_register_hw(struct ieee802
return 0;
@@ -52,7 +52,7 @@
fail_ifa:
#endif
wiphy_unregister(local->hw.wiphy);
@@ -1362,10 +1362,10 @@ void ieee80211_unregister_hw(struct ieee
@@ -1365,10 +1365,10 @@ void ieee80211_unregister_hw(struct ieee
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);

View File

@@ -55,7 +55,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
__NL80211_ATTR_AFTER_LAST,
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2729,7 +2729,7 @@ static void ieee80211_report_disconnect(
@@ -2734,7 +2734,7 @@ static void ieee80211_report_disconnect(
};
if (tx)
@@ -64,7 +64,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
else
cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
@@ -4719,7 +4719,8 @@ void ieee80211_mgd_quiesce(struct ieee80
@@ -4724,7 +4724,8 @@ void ieee80211_mgd_quiesce(struct ieee80
if (ifmgd->auth_data)
ieee80211_destroy_auth_data(sdata, false);
cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,

View File

@@ -34,7 +34,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -461,7 +461,9 @@ struct ieee80211_if_managed {
@@ -450,7 +450,9 @@ struct ieee80211_if_managed {
unsigned long probe_timeout;
int probe_send_count;
bool nullfunc_failed;
@@ -47,7 +47,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct ieee80211_mgd_auth_data *auth_data;
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2720,7 +2720,7 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get)
@@ -2725,7 +2725,7 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get)
static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
const u8 *buf, size_t len, bool tx,
@@ -56,7 +56,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
{
struct ieee80211_event event = {
.type = MLME_EVENT,
@@ -2729,7 +2729,7 @@ static void ieee80211_report_disconnect(
@@ -2734,7 +2734,7 @@ static void ieee80211_report_disconnect(
};
if (tx)
@@ -65,7 +65,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
else
cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
@@ -2751,13 +2751,18 @@ static void __ieee80211_disconnect(struc
@@ -2756,13 +2756,18 @@ static void __ieee80211_disconnect(struc
tx = !sdata->csa_block_tx;
@@ -89,7 +89,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
tx, frame_buf);
mutex_lock(&local->mtx);
sdata->vif.csa_active = false;
@@ -2770,7 +2775,9 @@ static void __ieee80211_disconnect(struc
@@ -2775,7 +2780,9 @@ static void __ieee80211_disconnect(struc
mutex_unlock(&local->mtx);
ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
@@ -100,7 +100,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sdata_unlock(sdata);
}
@@ -2789,6 +2796,13 @@ static void ieee80211_beacon_connection_
@@ -2794,6 +2801,13 @@ static void ieee80211_beacon_connection_
sdata_info(sdata, "Connection to AP %pM lost\n",
ifmgd->bssid);
__ieee80211_disconnect(sdata);
@@ -114,7 +114,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
} else {
ieee80211_mgd_probe_ap(sdata, true);
}
@@ -2827,6 +2841,21 @@ void ieee80211_connection_loss(struct ie
@@ -2832,6 +2846,21 @@ void ieee80211_connection_loss(struct ie
}
EXPORT_SYMBOL(ieee80211_connection_loss);
@@ -136,7 +136,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
bool assoc)
@@ -3130,7 +3159,7 @@ static void ieee80211_rx_mgmt_deauth(str
@@ -3135,7 +3164,7 @@ static void ieee80211_rx_mgmt_deauth(str
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
@@ -145,7 +145,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
return;
}
@@ -3179,7 +3208,8 @@ static void ieee80211_rx_mgmt_disassoc(s
@@ -3184,7 +3213,8 @@ static void ieee80211_rx_mgmt_disassoc(s
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
@@ -155,7 +155,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
}
static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
@@ -4199,7 +4229,8 @@ static void ieee80211_rx_mgmt_beacon(str
@@ -4204,7 +4234,8 @@ static void ieee80211_rx_mgmt_beacon(str
true, deauth_buf);
ieee80211_report_disconnect(sdata, deauth_buf,
sizeof(deauth_buf), true,
@@ -165,7 +165,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
return;
}
@@ -4344,7 +4375,7 @@ static void ieee80211_sta_connection_los
@@ -4349,7 +4380,7 @@ static void ieee80211_sta_connection_los
tx, frame_buf);
ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
@@ -174,7 +174,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
}
static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
@@ -5434,7 +5465,8 @@ int ieee80211_mgd_auth(struct ieee80211_
@@ -5439,7 +5470,8 @@ int ieee80211_mgd_auth(struct ieee80211_
ieee80211_report_disconnect(sdata, frame_buf,
sizeof(frame_buf), true,
@@ -184,7 +184,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
}
sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
@@ -5506,7 +5538,8 @@ int ieee80211_mgd_assoc(struct ieee80211
@@ -5511,7 +5543,8 @@ int ieee80211_mgd_assoc(struct ieee80211
ieee80211_report_disconnect(sdata, frame_buf,
sizeof(frame_buf), true,
@@ -194,7 +194,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
}
if (ifmgd->auth_data && !ifmgd->auth_data->done) {
@@ -5805,7 +5838,7 @@ int ieee80211_mgd_deauth(struct ieee8021
@@ -5810,7 +5843,7 @@ int ieee80211_mgd_deauth(struct ieee8021
ieee80211_destroy_auth_data(sdata, false);
ieee80211_report_disconnect(sdata, frame_buf,
sizeof(frame_buf), true,
@@ -203,7 +203,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
return 0;
}
@@ -5825,7 +5858,7 @@ int ieee80211_mgd_deauth(struct ieee8021
@@ -5830,7 +5863,7 @@ int ieee80211_mgd_deauth(struct ieee8021
ieee80211_destroy_assoc_data(sdata, false, true);
ieee80211_report_disconnect(sdata, frame_buf,
sizeof(frame_buf), true,
@@ -212,7 +212,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
return 0;
}
@@ -5840,7 +5873,7 @@ int ieee80211_mgd_deauth(struct ieee8021
@@ -5845,7 +5878,7 @@ int ieee80211_mgd_deauth(struct ieee8021
req->reason_code, tx, frame_buf);
ieee80211_report_disconnect(sdata, frame_buf,
sizeof(frame_buf), true,
@@ -221,7 +221,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
return 0;
}
@@ -5873,7 +5906,7 @@ int ieee80211_mgd_disassoc(struct ieee80
@@ -5878,7 +5911,7 @@ int ieee80211_mgd_disassoc(struct ieee80
frame_buf);
ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,

View File

@@ -68,7 +68,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
static int fq_init(struct fq *fq, int flows_cnt)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -857,7 +857,6 @@ enum txq_info_flags {
@@ -846,7 +846,6 @@ enum txq_info_flags {
*/
struct txq_info {
struct fq_tin tin;

View File

@@ -132,7 +132,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
#endif /* __MAC80211_DRIVER_OPS */
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -839,7 +839,7 @@ static const struct net_device_ops ieee8
@@ -835,7 +835,7 @@ static const struct net_device_ops ieee8
};
@@ -141,7 +141,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
{
switch (iftype) {
/* P2P GO and client are mapped to AP/STATION types */
@@ -859,7 +859,7 @@ static bool ieee80211_set_sdata_offload_
@@ -855,7 +855,7 @@ static bool ieee80211_set_sdata_offload_
flags = sdata->vif.offload_flags;
if (ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) &&
@@ -150,7 +150,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
flags |= IEEE80211_OFFLOAD_ENCAP_ENABLED;
if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_FRAG) &&
@@ -872,10 +872,21 @@ static bool ieee80211_set_sdata_offload_
@@ -868,10 +868,21 @@ static bool ieee80211_set_sdata_offload_
flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED;
}
@@ -172,7 +172,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
return true;
}
@@ -893,7 +904,7 @@ static void ieee80211_set_vif_encap_ops(
@@ -889,7 +900,7 @@ static void ieee80211_set_vif_encap_ops(
}
if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) ||
@@ -183,7 +183,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
enabled = bss->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_ENABLED;
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4114,7 +4114,9 @@ void ieee80211_check_fast_rx(struct sta_
@@ -4198,7 +4198,9 @@ void ieee80211_check_fast_rx(struct sta_
.vif_type = sdata->vif.type,
.control_port_protocol = sdata->control_port_protocol,
}, *old, *new = NULL;
@@ -193,7 +193,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/* use sparse to check that we don't return without updating */
__acquire(check_fast_rx);
@@ -4227,6 +4229,17 @@ void ieee80211_check_fast_rx(struct sta_
@@ -4311,6 +4313,17 @@ void ieee80211_check_fast_rx(struct sta_
if (assign)
new = kmemdup(&fastrx, sizeof(fastrx), GFP_KERNEL);
@@ -211,7 +211,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
spin_lock_bh(&sta->lock);
old = rcu_dereference_protected(sta->fast_rx, true);
rcu_assign_pointer(sta->fast_rx, new);
@@ -4273,6 +4286,108 @@ void ieee80211_check_fast_rx_iface(struc
@@ -4357,6 +4370,108 @@ void ieee80211_check_fast_rx_iface(struc
mutex_unlock(&local->sta_mtx);
}
@@ -320,7 +320,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
static bool ieee80211_invoke_fast_rx(struct ieee80211_rx_data *rx,
struct ieee80211_fast_rx *fast_rx)
{
@@ -4293,9 +4408,6 @@ static bool ieee80211_invoke_fast_rx(str
@@ -4377,9 +4492,6 @@ static bool ieee80211_invoke_fast_rx(str
} addrs __aligned(2);
struct ieee80211_sta_rx_stats *stats = &sta->rx_stats;
@@ -330,7 +330,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/* for parallel-rx, we need to have DUP_VALIDATED, otherwise we write
* to a common data structure; drivers can implement that per queue
* but we don't have that information in mac80211
@@ -4369,32 +4481,6 @@ static bool ieee80211_invoke_fast_rx(str
@@ -4453,32 +4565,6 @@ static bool ieee80211_invoke_fast_rx(str
pskb_trim(skb, skb->len - fast_rx->icv_len))
goto drop;
@@ -363,7 +363,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (rx->key && !ieee80211_has_protected(hdr->frame_control))
goto drop;
@@ -4406,12 +4492,6 @@ static bool ieee80211_invoke_fast_rx(str
@@ -4490,12 +4576,6 @@ static bool ieee80211_invoke_fast_rx(str
return true;
}
@@ -376,7 +376,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/* do the header conversion - first grab the addresses */
ether_addr_copy(addrs.da, skb->data + fast_rx->da_offs);
ether_addr_copy(addrs.sa, skb->data + fast_rx->sa_offs);
@@ -4420,62 +4500,14 @@ static bool ieee80211_invoke_fast_rx(str
@@ -4504,62 +4584,14 @@ static bool ieee80211_invoke_fast_rx(str
/* push the addresses in front */
memcpy(skb_push(skb, sizeof(addrs)), &addrs, sizeof(addrs));
@@ -443,7 +443,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
stats->dropped++;
return true;
}
@@ -4529,6 +4561,47 @@ static bool ieee80211_prepare_and_rx_han
@@ -4613,6 +4645,47 @@ static bool ieee80211_prepare_and_rx_han
return true;
}
@@ -491,7 +491,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/*
* This is the actual Rx frames handler. as it belongs to Rx path it must
* be called with rcu_read_lock protection.
@@ -4766,15 +4839,20 @@ void ieee80211_rx_list(struct ieee80211_
@@ -4850,15 +4923,20 @@ void ieee80211_rx_list(struct ieee80211_
* if it was previously present.
* Also, frames with less than 16 bytes are dropped.
*/

View File

@@ -15,7 +15,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1600,13 +1600,8 @@ ieee80211_have_rx_timestamp(struct ieee8
@@ -1587,13 +1587,8 @@ ieee80211_have_rx_timestamp(struct ieee8
{
WARN_ON_ONCE(status->flag & RX_FLAG_MACTIME_START &&
status->flag & RX_FLAG_MACTIME_END);

View File

@@ -1,69 +0,0 @@
From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Date: Tue, 11 May 2021 20:02:42 +0200
Subject: [PATCH] mac80211: assure all fragments are encrypted
Do not mix plaintext and encrypted fragments in protected Wi-Fi
networks. This fixes CVE-2020-26147.
Previously, an attacker was able to first forward a legitimate encrypted
fragment towards a victim, followed by a plaintext fragment. The
encrypted and plaintext fragment would then be reassembled. For further
details see Section 6.3 and Appendix D in the paper "Fragment and Forge:
Breaking Wi-Fi Through Frame Aggregation and Fragmentation".
Because of this change there are now two equivalent conditions in the
code to determine if a received fragment requires sequential PNs, so we
also move this test to a separate function to make the code easier to
maintain.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2204,6 +2204,16 @@ ieee80211_reassemble_find(struct ieee802
return NULL;
}
+static bool requires_sequential_pn(struct ieee80211_rx_data *rx, __le16 fc)
+{
+ return rx->key &&
+ (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP ||
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256 ||
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP ||
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP_256) &&
+ ieee80211_has_protected(fc);
+}
+
static ieee80211_rx_result debug_noinline
ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
{
@@ -2248,12 +2258,7 @@ ieee80211_rx_h_defragment(struct ieee802
/* This is the first fragment of a new frame. */
entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
rx->seqno_idx, &(rx->skb));
- if (rx->key &&
- (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP ||
- rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256 ||
- rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP ||
- rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP_256) &&
- ieee80211_has_protected(fc)) {
+ if (requires_sequential_pn(rx, fc)) {
int queue = rx->security_idx;
/* Store CCMP/GCMP PN so that we can verify that the
@@ -2295,11 +2300,7 @@ ieee80211_rx_h_defragment(struct ieee802
u8 pn[IEEE80211_CCMP_PN_LEN], *rpn;
int queue;
- if (!rx->key ||
- (rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP &&
- rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP_256 &&
- rx->key->conf.cipher != WLAN_CIPHER_SUITE_GCMP &&
- rx->key->conf.cipher != WLAN_CIPHER_SUITE_GCMP_256))
+ if (!requires_sequential_pn(rx, fc))
return RX_DROP_UNUSABLE;
memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN);
for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) {

View File

@@ -1,87 +0,0 @@
From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Date: Tue, 11 May 2021 20:02:43 +0200
Subject: [PATCH] mac80211: prevent mixed key and fragment cache attacks
Simultaneously prevent mixed key attacks (CVE-2020-24587) and fragment
cache attacks (CVE-2020-24586). This is accomplished by assigning a
unique color to every key (per interface) and using this to track which
key was used to decrypt a fragment. When reassembling frames, it is
now checked whether all fragments were decrypted using the same key.
To assure that fragment cache attacks are also prevented, the ID that is
assigned to keys is unique even over (re)associations and (re)connects.
This means fragments separated by a (re)association or (re)connect will
not be reassembled. Because mac80211 now also prevents the reassembly of
mixed encrypted and plaintext fragments, all cache attacks are prevented.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -97,6 +97,7 @@ struct ieee80211_fragment_entry {
u8 rx_queue;
bool check_sequential_pn; /* needed for CCMP/GCMP */
u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
+ unsigned int key_color;
};
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -799,6 +799,7 @@ int ieee80211_key_link(struct ieee80211_
struct ieee80211_sub_if_data *sdata,
struct sta_info *sta)
{
+ static atomic_t key_color = ATOMIC_INIT(0);
struct ieee80211_key *old_key;
int idx = key->conf.keyidx;
bool pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE;
@@ -850,6 +851,12 @@ int ieee80211_key_link(struct ieee80211_
key->sdata = sdata;
key->sta = sta;
+ /*
+ * Assign a unique ID to every key so we can easily prevent mixed
+ * key and fragment cache attacks.
+ */
+ key->color = atomic_inc_return(&key_color);
+
increment_tailroom_need_count(sdata);
ret = ieee80211_key_replace(sdata, sta, pairwise, old_key, key);
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -128,6 +128,8 @@ struct ieee80211_key {
} debugfs;
#endif
+ unsigned int color;
+
/*
* key config, must be last because it contains key
* material as variable length member
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2265,6 +2265,7 @@ ieee80211_rx_h_defragment(struct ieee802
* next fragment has a sequential PN value.
*/
entry->check_sequential_pn = true;
+ entry->key_color = rx->key->color;
memcpy(entry->last_pn,
rx->key->u.ccmp.rx_pn[queue],
IEEE80211_CCMP_PN_LEN);
@@ -2302,6 +2303,11 @@ ieee80211_rx_h_defragment(struct ieee802
if (!requires_sequential_pn(rx, fc))
return RX_DROP_UNUSABLE;
+
+ /* Prevent mixed key and fragment cache attacks */
+ if (entry->key_color != rx->key->color)
+ return RX_DROP_UNUSABLE;
+
memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN);
for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) {
pn[i]++;

View File

@@ -1,66 +0,0 @@
From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Date: Tue, 11 May 2021 20:02:44 +0200
Subject: [PATCH] mac80211: properly handle A-MSDUs that start with an
RFC 1042 header
Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042
header. This can occur in practice when the destination MAC address
equals AA:AA:03:00:00:00. More importantly, this simplifies the next
patch to mitigate A-MSDU injection attacks.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5628,7 +5628,7 @@ unsigned int ieee80211_get_mesh_hdrlen(s
*/
int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr,
const u8 *addr, enum nl80211_iftype iftype,
- u8 data_offset);
+ u8 data_offset, bool is_amsdu);
/**
* ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
@@ -5640,7 +5640,7 @@ int ieee80211_data_to_8023_exthdr(struct
static inline int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
enum nl80211_iftype iftype)
{
- return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype, 0);
+ return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype, 0, false);
}
/**
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2696,7 +2696,7 @@ __ieee80211_rx_h_amsdu(struct ieee80211_
if (ieee80211_data_to_8023_exthdr(skb, &ethhdr,
rx->sdata->vif.addr,
rx->sdata->vif.type,
- data_offset))
+ data_offset, true))
return RX_DROP_UNUSABLE;
ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr,
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -541,7 +541,7 @@ EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen)
int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr,
const u8 *addr, enum nl80211_iftype iftype,
- u8 data_offset)
+ u8 data_offset, bool is_amsdu)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct {
@@ -629,7 +629,7 @@ int ieee80211_data_to_8023_exthdr(struct
skb_copy_bits(skb, hdrlen, &payload, sizeof(payload));
tmp.h_proto = payload.proto;
- if (likely((ether_addr_equal(payload.hdr, rfc1042_header) &&
+ if (likely((!is_amsdu && ether_addr_equal(payload.hdr, rfc1042_header) &&
tmp.h_proto != htons(ETH_P_AARP) &&
tmp.h_proto != htons(ETH_P_IPX)) ||
ether_addr_equal(payload.hdr, bridge_tunnel_header)))

View File

@@ -1,40 +0,0 @@
From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Date: Tue, 11 May 2021 20:02:45 +0200
Subject: [PATCH] cfg80211: mitigate A-MSDU aggregation attacks
Mitigate A-MSDU injection attacks (CVE-2020-24588) by detecting if the
destination address of a subframe equals an RFC1042 (i.e., LLC/SNAP)
header, and if so dropping the complete A-MSDU frame. This mitigates
known attacks, although new (unknown) aggregation-based attacks may
remain possible.
This defense works because in A-MSDU aggregation injection attacks, a
normal encrypted Wi-Fi frame is turned into an A-MSDU frame. This means
the first 6 bytes of the first A-MSDU subframe correspond to an RFC1042
header. In other words, the destination MAC address of the first A-MSDU
subframe contains the start of an RFC1042 header during an aggregation
attack. We can detect this and thereby prevent this specific attack.
For details, see Section 7.2 of "Fragment and Forge: Breaking Wi-Fi
Through Frame Aggregation and Fragmentation".
Note that for kernel 4.9 and above this patch depends on "mac80211:
properly handle A-MSDUs that start with a rfc1042 header". Otherwise
this patch has no impact and attacks will remain possible.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -775,6 +775,9 @@ void ieee80211_amsdu_to_8023s(struct sk_
remaining = skb->len - offset;
if (subframe_len > remaining)
goto purge;
+ /* mitigate A-MSDU aggregation injection attacks */
+ if (ether_addr_equal(eth.h_dest, rfc1042_header))
+ goto purge;
offset += sizeof(struct ethhdr);
last = remaining <= subframe_len + padding;

View File

@@ -1,54 +0,0 @@
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 11 May 2021 20:02:46 +0200
Subject: [PATCH] mac80211: drop A-MSDUs on old ciphers
With old ciphers (WEP and TKIP) we shouldn't be using A-MSDUs
since A-MSDUs are only supported if we know that they are, and
the only practical way for that is HT support which doesn't
support old ciphers.
However, we would normally accept them anyway. Since we check
the MMIC before deaggregating A-MSDUs, and the A-MSDU bit in
the QoS header is not protected in TKIP (or WEP), this enables
attacks similar to CVE-2020-24588. To prevent that, drop A-MSDUs
completely with old ciphers.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -6,7 +6,7 @@
* Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright(c) 2015 - 2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*/
#include <linux/jiffies.h>
@@ -2753,6 +2753,23 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx
if (is_multicast_ether_addr(hdr->addr1))
return RX_DROP_UNUSABLE;
+ if (rx->key) {
+ /*
+ * We should not receive A-MSDUs on pre-HT connections,
+ * and HT connections cannot use old ciphers. Thus drop
+ * them, as in those cases we couldn't even have SPP
+ * A-MSDUs or such.
+ */
+ switch (rx->key->conf.cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ case WLAN_CIPHER_SUITE_TKIP:
+ return RX_DROP_UNUSABLE;
+ default:
+ break;
+ }
+ }
+
return __ieee80211_rx_h_amsdu(rx, 0);
}

View File

@@ -1,313 +0,0 @@
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 11 May 2021 20:02:47 +0200
Subject: [PATCH] mac80211: add fragment cache to sta_info
Prior patches protected against fragmentation cache attacks
by coloring keys, but this shows that it can lead to issues
when multiple stations use the same sequence number. Add a
fragment cache to struct sta_info (in addition to the one in
the interface) to separate fragments for different stations
properly.
This then automatically clear most of the fragment cache when a
station disconnects (or reassociates) from an AP, or when client
interfaces disconnect from the network, etc.
On the way, also fix the comment there since this brings us in line
with the recommendation in 802.11-2016 ("An AP should support ...").
Additionally, remove a useless condition (since there's no problem
purging an already empty list).
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -50,12 +50,6 @@ struct ieee80211_local;
#define IEEE80211_ENCRYPT_HEADROOM 8
#define IEEE80211_ENCRYPT_TAILROOM 18
-/* IEEE 802.11 (Ch. 9.5 Defragmentation) requires support for concurrent
- * reception of at least three fragmented frames. This limit can be increased
- * by changing this define, at the cost of slower frame reassembly and
- * increased memory use (about 2 kB of RAM per entry). */
-#define IEEE80211_FRAGMENT_MAX 4
-
/* power level hasn't been configured (or set to automatic) */
#define IEEE80211_UNSET_POWER_LEVEL INT_MIN
@@ -88,19 +82,6 @@ extern const u8 ieee80211_ac_to_qos_mask
#define IEEE80211_MAX_NAN_INSTANCE_ID 255
-struct ieee80211_fragment_entry {
- struct sk_buff_head skb_list;
- unsigned long first_frag_time;
- u16 seq;
- u16 extra_len;
- u16 last_frag;
- u8 rx_queue;
- bool check_sequential_pn; /* needed for CCMP/GCMP */
- u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
- unsigned int key_color;
-};
-
-
struct ieee80211_bss {
u32 device_ts_beacon, device_ts_presp;
@@ -912,9 +893,7 @@ struct ieee80211_sub_if_data {
char name[IFNAMSIZ];
- /* Fragment table for host-based reassembly */
- struct ieee80211_fragment_entry fragments[IEEE80211_FRAGMENT_MAX];
- unsigned int fragment_next;
+ struct ieee80211_fragment_cache frags;
/* TID bitmap for NoAck policy */
u16 noack_map;
@@ -2329,4 +2308,7 @@ u32 ieee80211_calc_expected_tx_airtime(s
#define debug_noinline
#endif
+void ieee80211_init_frag_cache(struct ieee80211_fragment_cache *cache);
+void ieee80211_destroy_frag_cache(struct ieee80211_fragment_cache *cache);
+
#endif /* IEEE80211_I_H */
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -8,7 +8,7 @@
* Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (c) 2016 Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*/
#include <linux/slab.h>
#include <linux/kernel.h>
@@ -679,16 +679,12 @@ static void ieee80211_set_multicast_list
*/
static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata)
{
- int i;
-
/* free extra data */
ieee80211_free_keys(sdata, false);
ieee80211_debugfs_remove_netdev(sdata);
- for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
- __skb_queue_purge(&sdata->fragments[i].skb_list);
- sdata->fragment_next = 0;
+ ieee80211_destroy_frag_cache(&sdata->frags);
if (ieee80211_vif_is_mesh(&sdata->vif))
ieee80211_mesh_teardown_sdata(sdata);
@@ -2038,8 +2034,7 @@ int ieee80211_if_add(struct ieee80211_lo
sdata->wdev.wiphy = local->hw.wiphy;
sdata->local = local;
- for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
- skb_queue_head_init(&sdata->fragments[i].skb_list);
+ ieee80211_init_frag_cache(&sdata->frags);
INIT_LIST_HEAD(&sdata->key_list);
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2133,19 +2133,34 @@ ieee80211_rx_h_decrypt(struct ieee80211_
return result;
}
+void ieee80211_init_frag_cache(struct ieee80211_fragment_cache *cache)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cache->entries); i++)
+ skb_queue_head_init(&cache->entries[i].skb_list);
+}
+
+void ieee80211_destroy_frag_cache(struct ieee80211_fragment_cache *cache)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cache->entries); i++)
+ __skb_queue_purge(&cache->entries[i].skb_list);
+}
+
static inline struct ieee80211_fragment_entry *
-ieee80211_reassemble_add(struct ieee80211_sub_if_data *sdata,
+ieee80211_reassemble_add(struct ieee80211_fragment_cache *cache,
unsigned int frag, unsigned int seq, int rx_queue,
struct sk_buff **skb)
{
struct ieee80211_fragment_entry *entry;
- entry = &sdata->fragments[sdata->fragment_next++];
- if (sdata->fragment_next >= IEEE80211_FRAGMENT_MAX)
- sdata->fragment_next = 0;
+ entry = &cache->entries[cache->next++];
+ if (cache->next >= IEEE80211_FRAGMENT_MAX)
+ cache->next = 0;
- if (!skb_queue_empty(&entry->skb_list))
- __skb_queue_purge(&entry->skb_list);
+ __skb_queue_purge(&entry->skb_list);
__skb_queue_tail(&entry->skb_list, *skb); /* no need for locking */
*skb = NULL;
@@ -2160,14 +2175,14 @@ ieee80211_reassemble_add(struct ieee8021
}
static inline struct ieee80211_fragment_entry *
-ieee80211_reassemble_find(struct ieee80211_sub_if_data *sdata,
+ieee80211_reassemble_find(struct ieee80211_fragment_cache *cache,
unsigned int frag, unsigned int seq,
int rx_queue, struct ieee80211_hdr *hdr)
{
struct ieee80211_fragment_entry *entry;
int i, idx;
- idx = sdata->fragment_next;
+ idx = cache->next;
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) {
struct ieee80211_hdr *f_hdr;
struct sk_buff *f_skb;
@@ -2176,7 +2191,7 @@ ieee80211_reassemble_find(struct ieee802
if (idx < 0)
idx = IEEE80211_FRAGMENT_MAX - 1;
- entry = &sdata->fragments[idx];
+ entry = &cache->entries[idx];
if (skb_queue_empty(&entry->skb_list) || entry->seq != seq ||
entry->rx_queue != rx_queue ||
entry->last_frag + 1 != frag)
@@ -2217,6 +2232,7 @@ static bool requires_sequential_pn(struc
static ieee80211_rx_result debug_noinline
ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
{
+ struct ieee80211_fragment_cache *cache = &rx->sdata->frags;
struct ieee80211_hdr *hdr;
u16 sc;
__le16 fc;
@@ -2238,6 +2254,9 @@ ieee80211_rx_h_defragment(struct ieee802
goto out_no_led;
}
+ if (rx->sta)
+ cache = &rx->sta->frags;
+
if (likely(!ieee80211_has_morefrags(fc) && frag == 0))
goto out;
@@ -2256,7 +2275,7 @@ ieee80211_rx_h_defragment(struct ieee802
if (frag == 0) {
/* This is the first fragment of a new frame. */
- entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
+ entry = ieee80211_reassemble_add(cache, frag, seq,
rx->seqno_idx, &(rx->skb));
if (requires_sequential_pn(rx, fc)) {
int queue = rx->security_idx;
@@ -2284,7 +2303,7 @@ ieee80211_rx_h_defragment(struct ieee802
/* This is a fragment for a frame that should already be pending in
* fragment cache. Add this fragment to the end of the pending entry.
*/
- entry = ieee80211_reassemble_find(rx->sdata, frag, seq,
+ entry = ieee80211_reassemble_find(cache, frag, seq,
rx->seqno_idx, hdr);
if (!entry) {
I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag);
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -4,7 +4,7 @@
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (C) 2015 - 2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*/
#include <linux/module.h>
@@ -393,6 +393,8 @@ struct sta_info *sta_info_alloc(struct i
u64_stats_init(&sta->rx_stats.syncp);
+ ieee80211_init_frag_cache(&sta->frags);
+
sta->sta_state = IEEE80211_STA_NONE;
/* Mark TID as unreserved */
@@ -1103,6 +1105,8 @@ static void __sta_info_destroy_part2(str
ieee80211_sta_debugfs_remove(sta);
+ ieee80211_destroy_frag_cache(&sta->frags);
+
cleanup_single_sta(sta);
}
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -3,7 +3,7 @@
* Copyright 2002-2005, Devicescape Software, Inc.
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright(c) 2020 Intel Corporation
+ * Copyright(c) 2020-2021 Intel Corporation
*/
#ifndef STA_INFO_H
@@ -439,6 +439,33 @@ struct ieee80211_sta_rx_stats {
};
/*
+ * IEEE 802.11-2016 (10.6 "Defragmentation") recommends support for "concurrent
+ * reception of at least one MSDU per access category per associated STA"
+ * on APs, or "at least one MSDU per access category" on other interface types.
+ *
+ * This limit can be increased by changing this define, at the cost of slower
+ * frame reassembly and increased memory use while fragments are pending.
+ */
+#define IEEE80211_FRAGMENT_MAX 4
+
+struct ieee80211_fragment_entry {
+ struct sk_buff_head skb_list;
+ unsigned long first_frag_time;
+ u16 seq;
+ u16 extra_len;
+ u16 last_frag;
+ u8 rx_queue;
+ bool check_sequential_pn; /* needed for CCMP/GCMP */
+ u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
+ unsigned int key_color;
+};
+
+struct ieee80211_fragment_cache {
+ struct ieee80211_fragment_entry entries[IEEE80211_FRAGMENT_MAX];
+ unsigned int next;
+};
+
+/*
* The bandwidth threshold below which the per-station CoDel parameters will be
* scaled to be more lenient (to prevent starvation of slow stations). This
* value will be scaled by the number of active stations when it is being
@@ -531,6 +558,7 @@ struct ieee80211_sta_rx_stats {
* @status_stats.last_ack_signal: last ACK signal
* @status_stats.ack_signal_filled: last ACK signal validity
* @status_stats.avg_ack_signal: average ACK signal
+ * @frags: fragment cache
*/
struct sta_info {
/* General information, mostly static */
@@ -639,6 +667,8 @@ struct sta_info {
struct cfg80211_chan_def tdls_chandef;
+ struct ieee80211_fragment_cache frags;
+
/* keep last! */
struct ieee80211_sta sta;
};

View File

@@ -1,109 +0,0 @@
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 11 May 2021 20:02:48 +0200
Subject: [PATCH] mac80211: check defrag PN against current frame
As pointed out by Mathy Vanhoef, we implement the RX PN check
on fragmented frames incorrectly - we check against the last
received PN prior to the new frame, rather than to the one in
this frame itself.
Prior patches addressed the security issue here, but in order
to be able to reason better about the code, fix it to really
compare against the current frame's PN, not the last stored
one.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -227,8 +227,15 @@ struct ieee80211_rx_data {
*/
int security_idx;
- u32 tkip_iv32;
- u16 tkip_iv16;
+ union {
+ struct {
+ u32 iv32;
+ u16 iv16;
+ } tkip;
+ struct {
+ u8 pn[IEEE80211_CCMP_PN_LEN];
+ } ccm_gcm;
+ };
};
struct ieee80211_csa_settings {
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2318,7 +2318,6 @@ ieee80211_rx_h_defragment(struct ieee802
if (entry->check_sequential_pn) {
int i;
u8 pn[IEEE80211_CCMP_PN_LEN], *rpn;
- int queue;
if (!requires_sequential_pn(rx, fc))
return RX_DROP_UNUSABLE;
@@ -2333,8 +2332,8 @@ ieee80211_rx_h_defragment(struct ieee802
if (pn[i])
break;
}
- queue = rx->security_idx;
- rpn = rx->key->u.ccmp.rx_pn[queue];
+
+ rpn = rx->ccm_gcm.pn;
if (memcmp(pn, rpn, IEEE80211_CCMP_PN_LEN))
return RX_DROP_UNUSABLE;
memcpy(entry->last_pn, pn, IEEE80211_CCMP_PN_LEN);
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -3,6 +3,7 @@
* Copyright 2002-2004, Instant802 Networks, Inc.
* Copyright 2008, Jouni Malinen <j@w1.fi>
* Copyright (C) 2016-2017 Intel Deutschland GmbH
+ * Copyright (C) 2020-2021 Intel Corporation
*/
#include <linux/netdevice.h>
@@ -167,8 +168,8 @@ ieee80211_rx_h_michael_mic_verify(struct
update_iv:
/* update IV in key information to be able to detect replays */
- rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip_iv32;
- rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip_iv16;
+ rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip.iv32;
+ rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip.iv16;
return RX_CONTINUE;
@@ -294,8 +295,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
key, skb->data + hdrlen,
skb->len - hdrlen, rx->sta->sta.addr,
hdr->addr1, hwaccel, rx->security_idx,
- &rx->tkip_iv32,
- &rx->tkip_iv16);
+ &rx->tkip.iv32,
+ &rx->tkip.iv16);
if (res != TKIP_DECRYPT_OK)
return RX_DROP_UNUSABLE;
@@ -552,6 +553,8 @@ ieee80211_crypto_ccmp_decrypt(struct iee
}
memcpy(key->u.ccmp.rx_pn[queue], pn, IEEE80211_CCMP_PN_LEN);
+ if (unlikely(ieee80211_is_frag(hdr)))
+ memcpy(rx->ccm_gcm.pn, pn, IEEE80211_CCMP_PN_LEN);
}
/* Remove CCMP header and MIC */
@@ -782,6 +785,8 @@ ieee80211_crypto_gcmp_decrypt(struct iee
}
memcpy(key->u.gcmp.rx_pn[queue], pn, IEEE80211_GCMP_PN_LEN);
+ if (unlikely(ieee80211_is_frag(hdr)))
+ memcpy(rx->ccm_gcm.pn, pn, IEEE80211_CCMP_PN_LEN);
}
/* Remove GCMP header and MIC */

View File

@@ -1,62 +0,0 @@
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 11 May 2021 20:02:49 +0200
Subject: [PATCH] mac80211: prevent attacks on TKIP/WEP as well
Similar to the issues fixed in previous patches, TKIP and WEP
should be protected even if for TKIP we have the Michael MIC
protecting it, and WEP is broken anyway.
However, this also somewhat protects potential other algorithms
that drivers might implement.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2284,6 +2284,7 @@ ieee80211_rx_h_defragment(struct ieee802
* next fragment has a sequential PN value.
*/
entry->check_sequential_pn = true;
+ entry->is_protected = true;
entry->key_color = rx->key->color;
memcpy(entry->last_pn,
rx->key->u.ccmp.rx_pn[queue],
@@ -2296,6 +2297,9 @@ ieee80211_rx_h_defragment(struct ieee802
sizeof(rx->key->u.gcmp.rx_pn[queue]));
BUILD_BUG_ON(IEEE80211_CCMP_PN_LEN !=
IEEE80211_GCMP_PN_LEN);
+ } else if (rx->key && ieee80211_has_protected(fc)) {
+ entry->is_protected = true;
+ entry->key_color = rx->key->color;
}
return RX_QUEUED;
}
@@ -2337,6 +2341,14 @@ ieee80211_rx_h_defragment(struct ieee802
if (memcmp(pn, rpn, IEEE80211_CCMP_PN_LEN))
return RX_DROP_UNUSABLE;
memcpy(entry->last_pn, pn, IEEE80211_CCMP_PN_LEN);
+ } else if (entry->is_protected &&
+ (!rx->key || !ieee80211_has_protected(fc) ||
+ rx->key->color != entry->key_color)) {
+ /* Drop this as a mixed key or fragment cache attack, even
+ * if for TKIP Michael MIC should protect us, and WEP is a
+ * lost cause anyway.
+ */
+ return RX_DROP_UNUSABLE;
}
skb_pull(rx->skb, ieee80211_hdrlen(fc));
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -455,7 +455,8 @@ struct ieee80211_fragment_entry {
u16 extra_len;
u16 last_frag;
u8 rx_queue;
- bool check_sequential_pn; /* needed for CCMP/GCMP */
+ u8 check_sequential_pn:1, /* needed for CCMP/GCMP */
+ is_protected:1;
u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
unsigned int key_color;
};

View File

@@ -1,94 +0,0 @@
From: Johannes Berg <johannes.berg@intel.com>
Date: Tue, 11 May 2021 20:02:50 +0200
Subject: [PATCH] mac80211: do not accept/forward invalid EAPOL frames
EAPOL frames are used for authentication and key management between the
AP and each individual STA associated in the BSS. Those frames are not
supposed to be sent by one associated STA to another associated STA
(either unicast for broadcast/multicast).
Similarly, in 802.11 they're supposed to be sent to the authenticator
(AP) address.
Since it is possible for unexpected EAPOL frames to result in misbehavior
in supplicant implementations, it is better for the AP to not allow such
cases to be forwarded to other clients either directly, or indirectly if
the AP interface is part of a bridge.
Accept EAPOL (control port) frames only if they're transmitted to the
own address, or, due to interoperability concerns, to the PAE group
address.
Disable forwarding of EAPOL (or well, the configured control port
protocol) frames back to wireless medium in all cases. Previously, these
frames were accepted from fully authenticated and authorized stations
and also from unauthenticated stations for one of the cases.
Additionally, to avoid forwarding by the bridge, rewrite the PAE group
address case to the local MAC address.
Cc: stable@vger.kernel.org
Co-developed-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2541,13 +2541,13 @@ static bool ieee80211_frame_allowed(stru
struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
/*
- * Allow EAPOL frames to us/the PAE group address regardless
- * of whether the frame was encrypted or not.
+ * Allow EAPOL frames to us/the PAE group address regardless of
+ * whether the frame was encrypted or not, and always disallow
+ * all other destination addresses for them.
*/
- if (ehdr->h_proto == rx->sdata->control_port_protocol &&
- (ether_addr_equal(ehdr->h_dest, rx->sdata->vif.addr) ||
- ether_addr_equal(ehdr->h_dest, pae_group_addr)))
- return true;
+ if (unlikely(ehdr->h_proto == rx->sdata->control_port_protocol))
+ return ether_addr_equal(ehdr->h_dest, rx->sdata->vif.addr) ||
+ ether_addr_equal(ehdr->h_dest, pae_group_addr);
if (ieee80211_802_1x_port_control(rx) ||
ieee80211_drop_unencrypted(rx, fc))
@@ -2572,8 +2572,28 @@ static void ieee80211_deliver_skb_to_loc
cfg80211_rx_control_port(dev, skb, noencrypt);
dev_kfree_skb(skb);
} else {
+ struct ethhdr *ehdr = (void *)skb_mac_header(skb);
+
memset(skb->cb, 0, sizeof(skb->cb));
+ /*
+ * 802.1X over 802.11 requires that the authenticator address
+ * be used for EAPOL frames. However, 802.1X allows the use of
+ * the PAE group address instead. If the interface is part of
+ * a bridge and we pass the frame with the PAE group address,
+ * then the bridge will forward it to the network (even if the
+ * client was not associated yet), which isn't supposed to
+ * happen.
+ * To avoid that, rewrite the destination address to our own
+ * address, so that the authenticator (e.g. hostapd) will see
+ * the frame, but bridge won't forward it anywhere else. Note
+ * that due to earlier filtering, the only other address can
+ * be the PAE group address.
+ */
+ if (unlikely(skb->protocol == sdata->control_port_protocol &&
+ !ether_addr_equal(ehdr->h_dest, sdata->vif.addr)))
+ ether_addr_copy(ehdr->h_dest, sdata->vif.addr);
+
/* deliver to local stack */
if (rx->list)
#if LINUX_VERSION_IS_GEQ(4,19,0)
@@ -2617,6 +2637,7 @@ ieee80211_deliver_skb(struct ieee80211_r
if ((sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN) &&
!(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) &&
+ ehdr->h_proto != rx->sdata->control_port_protocol &&
(sdata->vif.type != NL80211_IFTYPE_AP_VLAN || !sdata->u.vlan.sta)) {
if (is_multicast_ether_addr(ehdr->h_dest) &&
ieee80211_vif_get_num_mcast_if(sdata) != 0) {

View File

@@ -1,68 +0,0 @@
From: Wen Gong <wgong@codeaurora.org>
Date: Tue, 11 May 2021 20:02:51 +0200
Subject: [PATCH] mac80211: extend protection against mixed key and
fragment cache attacks
For some chips/drivers, e.g., QCA6174 with ath10k, the decryption is
done by the hardware, and the Protected bit in the Frame Control field
is cleared in the lower level driver before the frame is passed to
mac80211. In such cases, the condition for ieee80211_has_protected() is
not met in ieee80211_rx_h_defragment() of mac80211 and the new security
validation steps are not executed.
Extend mac80211 to cover the case where the Protected bit has been
cleared, but the frame is indicated as having been decrypted by the
hardware. This extends protection against mixed key and fragment cache
attack for additional drivers/chips. This fixes CVE-2020-24586 and
CVE-2020-24587 for such cases.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2239,6 +2239,7 @@ ieee80211_rx_h_defragment(struct ieee802
unsigned int frag, seq;
struct ieee80211_fragment_entry *entry;
struct sk_buff *skb;
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
hdr = (struct ieee80211_hdr *)rx->skb->data;
fc = hdr->frame_control;
@@ -2297,7 +2298,9 @@ ieee80211_rx_h_defragment(struct ieee802
sizeof(rx->key->u.gcmp.rx_pn[queue]));
BUILD_BUG_ON(IEEE80211_CCMP_PN_LEN !=
IEEE80211_GCMP_PN_LEN);
- } else if (rx->key && ieee80211_has_protected(fc)) {
+ } else if (rx->key &&
+ (ieee80211_has_protected(fc) ||
+ (status->flag & RX_FLAG_DECRYPTED))) {
entry->is_protected = true;
entry->key_color = rx->key->color;
}
@@ -2342,13 +2345,19 @@ ieee80211_rx_h_defragment(struct ieee802
return RX_DROP_UNUSABLE;
memcpy(entry->last_pn, pn, IEEE80211_CCMP_PN_LEN);
} else if (entry->is_protected &&
- (!rx->key || !ieee80211_has_protected(fc) ||
+ (!rx->key ||
+ (!ieee80211_has_protected(fc) &&
+ !(status->flag & RX_FLAG_DECRYPTED)) ||
rx->key->color != entry->key_color)) {
/* Drop this as a mixed key or fragment cache attack, even
* if for TKIP Michael MIC should protect us, and WEP is a
* lost cause anyway.
*/
return RX_DROP_UNUSABLE;
+ } else if (entry->is_protected && rx->key &&
+ entry->key_color != rx->key->color &&
+ (status->flag & RX_FLAG_DECRYPTED)) {
+ return RX_DROP_UNUSABLE;
}
skb_pull(rx->skb, ieee80211_hdrlen(fc));

View File

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
PKG_NAME:=json-c
PKG_VERSION:=0.15
PKG_RELEASE:=1
PKG_RELEASE:=2
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-nodoc.tar.gz
PKG_SOURCE_URL:=https://s3.amazonaws.com/json-c_releases/releases/
@@ -20,6 +20,7 @@ PKG_LICENSE:=MIT
PKG_LICENSE_FILES:=COPYING
PKG_CPE_ID:=cpe:/a:json-c_project:json-c
PKG_FLAGS := nonshared
PKG_BUILD_PARALLEL:=1
HOST_BUILD_PREFIX:=$(STAGING_DIR_HOST)

View File

@@ -8,7 +8,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=libnl-tiny
PKG_RELEASE:=1
PKG_RELEASE:=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL=$(PROJECT_GIT)/project/libnl-tiny.git
@@ -17,6 +17,8 @@ PKG_SOURCE_VERSION:=c291088f631d1694f7ba0444b59677b194348da8
PKG_MIRROR_HASH:=99bcce12701bb34dadb39689d95c2c5cf1e27719d0ecfd645d3957a8947025ac
CMAKE_INSTALL:=1
PKG_FLAGS := nonshared
PKG_LICENSE:=LGPL-2.1
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>

View File

@@ -1,7 +1,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=libubox
PKG_RELEASE=1
PKG_RELEASE=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL=$(PROJECT_GIT)/project/libubox.git
@@ -11,6 +11,8 @@ PKG_SOURCE_VERSION:=b14c4688612c05c78ce984d7bde633bce8703b1e
PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
CMAKE_INSTALL:=1
PKG_FLAGS := nonshared
PKG_LICENSE:=ISC
PKG_LICENSE_FILES:=

View File

@@ -155,7 +155,7 @@ proto_mbim_setup() {
sleep 15
}
return $rt
return $ret
}
proto_mbim_teardown() {

View File

@@ -14,9 +14,9 @@ PKG_FLAGS:=essential
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://git.openwrt.org/project/opkg-lede.git
PKG_SOURCE_DATE:=2021-03-15
PKG_SOURCE_VERSION:=5936c4f9660248284e8a9b040ea3153d3ea888de
PKG_MIRROR_HASH:=b873c209baaf4f150c89646d58e4a0072f807d24b02c320ab8c7ae9180c13240
PKG_SOURCE_DATE:=2021-06-13
PKG_SOURCE_VERSION:=1bf042dd06751b693a8544d2317e5b969d666b69
PKG_MIRROR_HASH:=aeda4e0f11805bf95fc7be6d38391ce579acd965c8ba6a490b3e8669815b7264
PKG_LICENSE:=GPL-2.0
PKG_LICENSE_FILES:=COPYING

View File

@@ -1,13 +1,13 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=ubus
PKG_RELEASE:=1
PKG_RELEASE:=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL=$(PROJECT_GIT)/project/ubus.git
PKG_SOURCE_DATE:=2021-02-15
PKG_SOURCE_VERSION:=2537be01858710e714c329153760c64fe3f8a73e
PKG_MIRROR_HASH:=da1f4959fbe3d51cbc6b7c08b24307f43a80911b395cac834b9f4161c195152f
PKG_SOURCE_DATE:=2021-06-03
PKG_SOURCE_VERSION:=a8cf678230ed163ff7a07eb1e2c872f9d655460a
PKG_MIRROR_HASH:=aee34cd1c1aa0f1a459dda0b2c6cbdb6b66e67147ebd1bcbb2a16a2ef923d008
PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
CMAKE_INSTALL:=1
@@ -15,6 +15,7 @@ PKG_LICENSE:=LGPL-2.1
PKG_LICENSE_FILES:=
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
PKG_FLAGS := nonshared
PKG_ASLR_PIE_REGULAR:=1
include $(INCLUDE_DIR)/package.mk

View File

@@ -9,7 +9,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=uci
PKG_RELEASE:=4
PKG_RELEASE:=5
PKG_SOURCE_URL=$(PROJECT_GIT)/project/uci.git
PKG_SOURCE_PROTO:=git
@@ -23,6 +23,7 @@ PKG_LICENSE_FILES:=
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
PKG_BUILD_PARALLEL:=0
PKG_FLAGS := nonshared
include $(INCLUDE_DIR)/package.mk
include $(INCLUDE_DIR)/cmake.mk

View File

@@ -9,13 +9,14 @@ include $(TOPDIR)/rules.mk
PKG_NAME:=lua
PKG_VERSION:=5.1.5
PKG_RELEASE:=8
PKG_RELEASE:=9
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=http://www.lua.org/ftp/ \
http://www.tecgraf.puc-rio.br/lua/ftp/
PKG_HASH:=2640fc56a795f29d28ef15e13c34a47e223960b0240e8cb0a82d9b0738695333
PKG_BUILD_PARALLEL:=1
PKG_FLAGS := nonshared
PKG_LICENSE:=MIT
PKG_LICENSE_FILES:=COPYRIGHT

View File

@@ -93,7 +93,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
static const char hcd_name[] = "xhci_hcd";
static struct hc_driver __read_mostly xhci_pci_hc_driver;
@@ -307,6 +347,873 @@ static void xhci_pme_acpi_rtd3_enable(st
@@ -309,6 +349,873 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */
@@ -967,7 +967,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
@@ -348,6 +1255,27 @@ static int xhci_pci_probe(struct pci_dev
@@ -350,6 +1257,27 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
@@ -995,7 +995,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
driver = (struct hc_driver *)id->driver_data;
/* Prevent runtime suspending between USB-2 and USB-3 initialization */
@@ -409,6 +1337,16 @@ static void xhci_pci_remove(struct pci_d
@@ -411,6 +1339,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;
@@ -1012,7 +1012,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
xhci = hcd_to_xhci(pci_get_drvdata(dev));
xhci->xhc_state |= XHCI_STATE_REMOVING;
@@ -548,6 +1486,11 @@ static int xhci_pci_resume(struct usb_hc
@@ -550,6 +1488,11 @@ static int xhci_pci_resume(struct usb_hc
if (pdev->vendor == PCI_VENDOR_ID_INTEL)
usb_enable_intel_xhci_ports(pdev);

View File

@@ -13,7 +13,7 @@ produce a noisy warning.
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -286,6 +286,7 @@ static void xhci_pci_quirks(struct devic
@@ -288,6 +288,7 @@ static void xhci_pci_quirks(struct devic
pdev->device == 0x0015) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_ZERO_64B_REGS;

View File

@@ -116,8 +116,8 @@ define Device/calamp_lmu5000
$(Device/production)
DEVICE_VENDOR := CalAmp
DEVICE_MODEL := LMU5000
DEVICE_PACKAGES := kmod-rtc-pcf2123 kmod-usb-acm kmod-usb-serial \
kmod-usb-serial-option kmod-usb-serial-sierrawireless kmod-gpio-mcp23s08
DEVICE_PACKAGES := kmod-rtc-pcf2123 kmod-usb-acm \
kmod-usb-serial-option kmod-usb-serial-sierrawireless kmod-gpio-mcp23s08
endef
TARGET_DEVICES += calamp_lmu5000

View File

@@ -1,10 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7240.dtsi"
#include "ar724x_senao_loader-64k.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "engenius,enh202-v1", "qca,ar7240";
@@ -69,92 +69,6 @@
linux,default-trigger = "phy0tpt";
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
};
partition@50000 {
label = "custom";
reg = <0x50000 0x50000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0xa0000 0x10000>;
read-only;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0xb0000 0xf0000>;
};
partition@1a0000 {
label = "fakeroot";
reg = <0x1a0000 0x10000>;
read-only;
};
fwconcat0: partition@1b0000 {
label = "fwconcat0";
reg = <0x1b0000 0x4c0000>;
};
partition@670000 {
label = "failsafe";
reg = <0x670000 0x180000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&eth0 {

View File

@@ -1,10 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7242.dtsi"
#include "ar724x_senao_loader-4k.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "engenius,eap350-v1", "qca,ar7242";
@@ -48,92 +48,6 @@
linux,default-trigger = "phy0tpt";
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
};
partition@50000 {
label = "custom";
reg = <0x50000 0x50000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0xa0000 0x10000>;
read-only;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0xb0000 0xf0000>;
};
partition@1a0000 {
label = "fakeroot";
reg = <0x1a0000 0x10000>;
read-only;
};
fwconcat0: partition@1b0000 {
label = "fwconcat0";
reg = <0x1b0000 0x4c0000>;
};
partition@670000 {
label = "failsafe";
reg = <0x670000 0x180000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&mdio0 {

View File

@@ -1,10 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7242.dtsi"
#include "ar724x_senao_loader-4k.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "engenius,ecb350-v1", "qca,ar7242";
@@ -48,92 +48,6 @@
linux,default-trigger = "phy0tpt";
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
};
partition@50000 {
label = "custom";
reg = <0x50000 0x50000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0xa0000 0x10000>;
read-only;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0xb0000 0xf0000>;
};
partition@1a0000 {
label = "fakeroot";
reg = <0x1a0000 0x10000>;
read-only;
};
fwconcat0: partition@1b0000 {
label = "fwconcat0";
reg = <0x1b0000 0x4c0000>;
};
partition@670000 {
label = "failsafe";
reg = <0x670000 0x180000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&mdio0 {

View File

@@ -0,0 +1,84 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <0x73714f4b>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
};
partition@50000 {
label = "custom";
reg = <0x50000 0x50000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0xa0000 0x1000>;
};
fwconcat1: partition@a1000 {
label = "fwconcat1";
reg = <0xa1000 0xff000>;
};
fwconcat0: partition@1a0000 {
label = "fwconcat0";
reg = <0x1a0000 0x4d0000>;
};
partition@670000 {
label = "failsafe";
reg = <0x670000 0x180000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};

View File

@@ -0,0 +1,84 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <0x73714f4b>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
};
partition@50000 {
label = "custom";
reg = <0x50000 0x50000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0xa0000 0x10000>;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0xb0000 0xf0000>;
};
fwconcat0: partition@1a0000 {
label = "fwconcat0";
reg = <0x1a0000 0x4d0000>;
};
partition@670000 {
label = "failsafe";
reg = <0x670000 0x180000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};

View File

@@ -1,10 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9341.dtsi"
#include "ar934x_senao_loader.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
model = "Engenius EAP300 v2";
@@ -43,96 +43,6 @@
linux,default-trigger = "phy0tpt";
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&ref {
clock-frequency = <40000000>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "custom";
reg = <0x050000 0x050000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0x0a0000 0x010000>;
read-only;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0x0b0000 0x170000>;
};
partition@220000 {
label = "fakeroot";
reg = <0x220000 0x010000>;
read-only;
};
fwconcat0: partition@230000 {
label = "fwconcat0";
reg = <0x230000 0xbc0000>;
};
partition@df0000 {
label = "failsafe";
reg = <0xdf0000 0x200000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth1 {

View File

@@ -1,10 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9341.dtsi"
#include "ar934x_senao_loader.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
model = "Engenius ENS202EXT v1";
@@ -58,96 +58,6 @@
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&ref {
clock-frequency = <40000000>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "custom";
reg = <0x050000 0x050000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0x0a0000 0x010000>;
read-only;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0x0b0000 0x170000>;
};
partition@220000 {
label = "fakeroot";
reg = <0x220000 0x010000>;
read-only;
};
fwconcat0: partition@230000 {
label = "fwconcat0";
reg = <0x230000 0xbc0000>;
};
partition@df0000 {
label = "failsafe";
reg = <0xdf0000 0x200000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth0 {

View File

@@ -1,10 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344.dtsi"
#include "ar934x_senao_loader.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
aliases {
@@ -35,96 +35,6 @@
linux,default-trigger = "phy1tpt";
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&ref {
clock-frequency = <40000000>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "custom";
reg = <0x050000 0x050000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0x0a0000 0x010000>;
read-only;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0x0b0000 0x170000>;
};
partition@220000 {
label = "fakeroot";
reg = <0x220000 0x010000>;
read-only;
};
fwconcat0: partition@230000 {
label = "fwconcat0";
reg = <0x230000 0xbc0000>;
};
partition@df0000 {
label = "failsafe";
reg = <0xdf0000 0x200000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {

View File

@@ -144,10 +144,10 @@
&eth0 {
status = "okay";
pll-data = <0x0e000000 0x3c000101 0x3c001313>;
pll-data = <0x02000000 0x00000101 0x00001313>;
/* ethernet MAC is stored in nvram */
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&phy4>;
gmac-config {

View File

@@ -0,0 +1,88 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <0x73714f4b>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&ref {
clock-frequency = <40000000>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "custom";
reg = <0x050000 0x050000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0x0a0000 0x010000>;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0x0b0000 0x170000>;
};
fwconcat0: partition@220000 {
label = "fwconcat0";
reg = <0x220000 0xbd0000>;
};
partition@df0000 {
label = "failsafe";
reg = <0xdf0000 0x200000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};

View File

@@ -1,10 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include "qca955x_senao_loader.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "engenius,eap1200h", "qca,qca9557";
@@ -55,91 +54,13 @@
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "custom";
reg = <0x050000 0x050000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0x0a0000 0x010000>;
read-only;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0x0b0000 0x170000>;
};
partition@220000 {
label = "fakeroot";
reg = <0x220000 0x010000>;
read-only;
};
fwconcat0: partition@230000 {
label = "fwconcat0";
reg = <0x230000 0xb40000>;
};
partition@d70000 {
label = "failsafe";
reg = <0xd70000 0x280000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
&partitions {
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
@@ -164,16 +85,6 @@
pll-data = <0x82000000 0x80000101 0x80001313>;
};
&pcie0 {
status = "okay";
wifi@0,0,0 {
compatible = "qcom,ath10k";
reg = <0x0 0 0 0 0>;
qca,no-eeprom;
};
};
&wmac {
status = "okay";

View File

@@ -1,10 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include "qca955x_senao_loader.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
compatible = "engenius,enstationac-v1", "qca,qca9557";
@@ -59,91 +58,13 @@
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <IH_MAGIC_OKLI>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "custom";
reg = <0x050000 0x050000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0x0a0000 0x010000>;
read-only;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0x0b0000 0x170000>;
};
partition@220000 {
label = "fakeroot";
reg = <0x220000 0x010000>;
read-only;
};
fwconcat0: partition@230000 {
label = "fwconcat0";
reg = <0x230000 0xb40000>;
};
partition@d70000 {
label = "failsafe";
reg = <0xd70000 0x280000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
&partitions {
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
@@ -187,13 +108,3 @@
qca955x-sgmii-fixup;
};
&pcie0 {
status = "okay";
wifi@0,0,0 {
compatible = "qcom,ath10k";
reg = <0x0 0 0 0 0>;
qca,no-eeprom;
};
};

View File

@@ -1,13 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include "qca955x_senao_loader.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "ALLNET ALL-WAP02860AC";
compatible = "allnet,all-wap02860ac", "qca,qca9558";
model = "ALLNET ALL-WAP02860AC";
aliases {
label-mac-device = &eth0;
@@ -22,8 +22,9 @@
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
linux,code = <KEY_RESTART>;
};
};
@@ -58,11 +59,12 @@
&eth0 {
status = "okay";
pll-data = <0x8e000000 0x80000101 0x80001313>;
phy-handle = <&phy5>;
phy-mode = "rgmii-rxid";
mtd-mac-address = <&art 0x0>;
phy-handle = <&phy5>;
phy-mode = "rgmii-id";
pll-data = <0x82000000 0x80000101 0x80001313>;
};
&mdio0 {
@@ -75,67 +77,11 @@
};
};
&pcie0 {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
};
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "custom";
reg = <0x050000 0x050000>;
read-only;
};
partition@a0000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x0a0000 0xcd0000>;
};
partition@d70000 {
label = "failsafe";
reg = <0xd70000 0x280000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
&partitions {
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
@@ -145,5 +91,4 @@
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
qca-no-eeprom;
};

View File

@@ -0,0 +1,91 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include <dt-bindings/mtd/partitions/uimage.h>
/ {
virtual_flash {
compatible = "mtd-concat";
devices = <&fwconcat0 &fwconcat1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <0x73714f4b>;
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&pcie0 {
status = "okay";
wifi@0,0,0 {
compatible = "qcom,ath10k";
reg = <0x0 0 0 0 0>;
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "custom";
reg = <0x050000 0x050000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0x0a0000 0x010000>;
};
fwconcat1: partition@b0000 {
label = "fwconcat1";
reg = <0x0b0000 0x170000>;
};
fwconcat0: partition@220000 {
label = "fwconcat0";
reg = <0x220000 0xb50000>;
};
partition@d70000 {
label = "failsafe";
reg = <0xd70000 0x280000>;
read-only;
};
/* additional partitions in device DTS files */
};
};
};

View File

@@ -0,0 +1,64 @@
# U-Boot with the datachk patchset requires image sizes, offsets,
# and checksums to be provided in the U-Boot environment.
# This script is based on the dualboot version for devices that come with 2 OS partitions.
# For Senao boards with a "failsafe" partition image, the process is almost the same.
# Instead of booting a secondary instalation on checksum failure,
# the failsafe image is booted instead.
# These boards also use the OKLI lzma kernel loader and mtd-concat
# So the kernel check is for the loader, the rootfs check is for kernel + rootfs
platform_do_upgrade_failsafe_datachk() {
local setenv_script="/tmp/fw_env_upgrade"
local flash_base=0x9f000000
local kernel_mtd=$(find_mtd_index ${KERNEL_PART:-kernel})
local rootfs_mtd=$(find_mtd_index ${ROOTFS_PART:-rootfs})
local kernel_offset=$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)
local rootfs_offset=$(cat /sys/class/mtd/mtd${rootfs_mtd}/offset)
if [ -n "$IMAGE_LIST" ]; then
KERNEL_FILE=$($IMAGE_LIST | grep $KERNEL_FILE)
ROOTFS_FILE=$($IMAGE_LIST | grep $ROOTFS_FILE)
fi
local kernel_size=$($IMAGE_CMD $KERNEL_FILE | wc -c)
local rootfs_size=$($IMAGE_CMD $ROOTFS_FILE | wc -c)
# rootfs without JFFS2
local rootfs_blocks=$((rootfs_size / 4096))
rootfs_size=$((rootfs_blocks * 4096))
local kernel_md5=$($IMAGE_CMD $KERNEL_FILE | md5sum | cut -d ' ' -f1)
local rootfs_md5=$($IMAGE_CMD $ROOTFS_FILE | dd bs=4k count=$rootfs_blocks iflag=fullblock | md5sum | cut -d ' ' -f1)
# prepare new u-boot-env vars
printf "vmlinux_start_addr 0x%08x\n" $((flash_base + kernel_offset)) >> $setenv_script
printf "vmlinux_size 0x%08x\n" ${kernel_size} >> $setenv_script
printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
printf "rootfs_start_addr 0x%08x\n" $((flash_base + rootfs_offset)) >> $setenv_script
printf "rootfs_size 0x%08x\n" ${rootfs_size} >> $setenv_script
printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
# store u-boot-env
mkdir -p /var/lock
fw_setenv -s $setenv_script || {
echo 'failed to update U-Boot environment'
exit 1
}
# sysupgrade
sleep 2
sync
echo 3 > /proc/sys/vm/drop_caches
$IMAGE_CMD $KERNEL_FILE | mtd $MTD_ARGS write - ${KERNEL_PART:-kernel}
sleep 2
sync
if [ -n "$UPGRADE_BACKUP" ]; then
$IMAGE_CMD $ROOTFS_FILE | mtd $MTD_ARGS $MTD_CONFIG_ARGS -j $UPGRADE_BACKUP write - ${ROOTFS_PART:-rootfs}
else
$IMAGE_CMD $ROOTFS_FILE | mtd $MTD_ARGS write - ${ROOTFS_PART:-rootfs}
fi
}

View File

@@ -47,6 +47,21 @@ platform_do_upgrade() {
adtran,bsap1840)
redboot_fis_do_upgrade "$1" vmlinux_2
;;
allnet,all-wap02860ac|\
engenius,eap1200h|\
engenius,eap300-v2|\
engenius,eap600|\
engenius,ecb600|\
engenius,ens202ext-v1|\
engenius,enstationac-v1)
IMAGE_LIST="tar tzf $1"
IMAGE_CMD="tar xzOf $1"
KERNEL_PART="loader"
ROOTFS_PART="fwconcat0"
KERNEL_FILE="uImage-lzma.bin"
ROOTFS_FILE="root.squashfs"
platform_do_upgrade_failsafe_datachk "$1"
;;
jjplus,ja76pf2)
redboot_fis_do_upgrade "$1" linux
;;

View File

@@ -4,6 +4,7 @@ include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR = 0x80060000
DEVICE_VARS += LOADER_FLASH_OFFS LOADER_TYPE
DEVICE_VARS += LOADER_FLASH_MAX LOADER_KERNEL_MAGIC
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
@@ -30,7 +31,10 @@ define Build/loader-kernel
endef
define Build/loader-okli-compile
$(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0)
$(call Build/loader-common, \
FLASH_OFFS=$(LOADER_FLASH_OFFS) \
FLASH_MAX=$(LOADER_FLASH_MAX) \
KERNEL_MAGIC=$(LOADER_KERNEL_MAGIC) )
endef
# Arguments: <output name> <kernel offset>
@@ -66,6 +70,10 @@ define Device/Default
BLOCKSIZE := 64k
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
LOADER_KERNEL_MAGIC :=
LOADER_FLASH_MAX :=
LOADER_FLASH_OFFS :=
LOADER_TYPE :=
COMPILE :=
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \

View File

@@ -1,33 +1,40 @@
DEVICE_VARS += ENGENIUS_IMGNAME
DEVICE_VARS += SENAO_IMGNAME
# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
# sysupgrade, as otherwise it will implant the old configuration from
# OEM firmware when writing rootfs from factory.bin
define Build/engenius-tar-gz
# rootfs size and checksum is taken from a squashfs header
# the header does not exist, therefore, supply the size and md5
define Build/senao-tar-gz
-[ -f "$@" ] && \
mkdir -p $@.tmp && \
touch $@.tmp/failsafe.bin && \
echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
echo -n $$(( $$(cat $@ | wc -c) / 4096 * 4096 )) > $@.len && \
dd if=$@ bs=$$(cat $@.len) count=1 | md5sum - | cut -d ' ' -f 1 > $@.md5 && \
echo '#!/bin/sh' > $@.tmp/after-upgrade.sh && \
printf 'fw_setenv rootfs_size 0x%08x\n' $$(cat $@.len) >> $@.tmp/after-upgrade.sh && \
printf 'fw_setenv rootfs_checksum %s\n' $$(cat $@.md5) >> $@.tmp/after-upgrade.sh && \
$(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \
$@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \
$(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \
$(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-C $@.tmp . | gzip -9n > $@ && \
rm -rf $@.tmp
rm -rf $@.tmp $@.len $@.md5
endef
define Device/engenius_loader_okli
DEVICE_VENDOR := EnGenius
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
define Device/senao_loader_okli
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x73714f4b
LOADER_KERNEL_MAGIC := 0x73714f4b
LOADER_TYPE := bin
COMPILE := loader-$(1).bin loader-$(1).uImage
COMPILE/loader-$(1).bin := loader-okli-compile
COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
uImage lzma
IMAGES += factory.bin
IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \
append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
check-size | engenius-tar-gz $$$$(ENGENIUS_IMGNAME)
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
check-size | senao-tar-gz $$$$(SENAO_IMGNAME)
IMAGE/sysupgrade.bin := $$(IMAGE/factory.bin) | append-metadata
endef

View File

@@ -492,7 +492,7 @@ define Device/tplink_tl-mr6400-v1
DEVICE_MODEL := TL-MR6400
DEVICE_VARIANT := v1
TPLINK_HWID := 0x64000001
DEVICE_PACKAGES := kmod-usb2 kmod-usb-net-rndis kmod-usb-serial \
DEVICE_PACKAGES := kmod-usb2 kmod-usb-net-rndis \
kmod-usb-serial-option adb-enablemodem
SUPPORTED_DEVICES += tl-mr6400
endef

View File

@@ -1,6 +1,6 @@
include ./common-buffalo.mk
include ./common-engenius.mk
include ./common-netgear.mk
include ./common-senao.mk
include ./common-tp-link.mk
include ./common-yuncore.mk
@@ -290,11 +290,14 @@ endef
TARGET_DEVICES += alfa-network_r36a
define Device/allnet_all-wap02860ac
$(Device/senao_loader_okli)
SOC := qca9558
DEVICE_VENDOR := ALLNET
DEVICE_MODEL := ALL-WAP02860AC
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
IMAGE_SIZE := 13120k
IMAGE_SIZE := 11584k
LOADER_FLASH_OFFS := 0x220000
SENAO_IMGNAME := senao-allwap02860ac
endef
TARGET_DEVICES += allnet_all-wap02860ac
@@ -989,34 +992,37 @@ endef
TARGET_DEVICES += embeddedwireless_dorin
define Device/engenius_eap1200h
$(Device/engenius_loader_okli)
$(Device/senao_loader_okli)
SOC := qca9557
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP1200H
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
IMAGE_SIZE := 11520k
LOADER_FLASH_OFFS := 0x230000
ENGENIUS_IMGNAME := ar71xx-generic-eap1200h
IMAGE_SIZE := 11584k
LOADER_FLASH_OFFS := 0x220000
SENAO_IMGNAME := ar71xx-generic-eap1200h
endef
TARGET_DEVICES += engenius_eap1200h
define Device/engenius_eap300-v2
$(Device/engenius_loader_okli)
$(Device/senao_loader_okli)
SOC := ar9341
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP300
DEVICE_VARIANT := v2
IMAGE_SIZE := 12032k
LOADER_FLASH_OFFS := 0x230000
ENGENIUS_IMGNAME := senao-eap300v2
IMAGE_SIZE := 12096k
LOADER_FLASH_OFFS := 0x220000
SENAO_IMGNAME := senao-eap300v2
endef
TARGET_DEVICES += engenius_eap300-v2
define Device/engenius_eap600
$(Device/engenius_loader_okli)
$(Device/senao_loader_okli)
SOC := ar9344
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP600
IMAGE_SIZE := 12032k
LOADER_FLASH_OFFS := 0x230000
ENGENIUS_IMGNAME := senao-eap600
IMAGE_SIZE := 12096k
LOADER_FLASH_OFFS := 0x220000
SENAO_IMGNAME := senao-eap600
endef
TARGET_DEVICES += engenius_eap600
@@ -1047,36 +1053,39 @@ endef
TARGET_DEVICES += engenius_ecb1750
define Device/engenius_ecb600
$(Device/engenius_loader_okli)
$(Device/senao_loader_okli)
SOC := ar9344
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ECB600
IMAGE_SIZE := 12032k
LOADER_FLASH_OFFS := 0x230000
ENGENIUS_IMGNAME := senao-ecb600
IMAGE_SIZE := 12096k
LOADER_FLASH_OFFS := 0x220000
SENAO_IMGNAME := senao-ecb600
endef
TARGET_DEVICES += engenius_ecb600
define Device/engenius_ens202ext-v1
$(Device/engenius_loader_okli)
$(Device/senao_loader_okli)
SOC := ar9341
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ENS202EXT
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
IMAGE_SIZE := 12032k
LOADER_FLASH_OFFS := 0x230000
ENGENIUS_IMGNAME := senao-ens202ext
IMAGE_SIZE := 12096k
LOADER_FLASH_OFFS := 0x220000
SENAO_IMGNAME := senao-ens202ext
endef
TARGET_DEVICES += engenius_ens202ext-v1
define Device/engenius_enstationac-v1
$(Device/engenius_loader_okli)
$(Device/senao_loader_okli)
SOC := qca9557
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EnStationAC
DEVICE_VARIANT := v1
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct rssileds
IMAGE_SIZE := 11520k
LOADER_FLASH_OFFS := 0x230000
ENGENIUS_IMGNAME := ar71xx-generic-enstationac
IMAGE_SIZE := 11584k
LOADER_FLASH_OFFS := 0x220000
SENAO_IMGNAME := ar71xx-generic-enstationac
endef
TARGET_DEVICES += engenius_enstationac-v1
@@ -1116,7 +1125,7 @@ define Device/etactica_eg200
DEVICE_VENDOR := eTactica
DEVICE_MODEL := EG200
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \
kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
IMAGE_SIZE := 16000k
SUPPORTED_DEVICES += rme-eg200
endef
@@ -2219,7 +2228,7 @@ define Device/zbtlink_zbt-wd323
DEVICE_MODEL := WD323
IMAGE_SIZE := 16000k
DEVICE_PACKAGES := kmod-usb2 kmod-i2c-gpio kmod-rtc-pcf8563 \
kmod-usb-serial kmod-usb-serial-cp210x uqmi
kmod-usb-serial-cp210x uqmi
endef
TARGET_DEVICES += zbtlink_zbt-wd323

View File

@@ -13,6 +13,7 @@ LOADADDR := 0x80060000
LOADER := loader.bin
LOADER_NAME := $(basename $(notdir $(LOADER)))
LOADER_DATA :=
KERNEL_MAGIC :=
TARGET_DIR :=
FLASH_OFFS :=
FLASH_MAX :=
@@ -41,6 +42,7 @@ loader-compile: $(PKG_BUILD_DIR)/.prepared
LZMA_TEXT_START=$(LZMA_TEXT_START) \
LOADADDR=$(LOADADDR) \
LOADER_DATA=$(LOADER_DATA) \
KERNEL_MAGIC=$(KERNEL_MAGIC) \
FLASH_OFFS=$(FLASH_OFFS) \
FLASH_MAX=$(FLASH_MAX) \
BOARD="$(BOARD)" \

View File

@@ -18,6 +18,7 @@
LOADADDR :=
LZMA_TEXT_START := 0x80a00000
LOADER_DATA :=
KERNEL_MAGIC :=
BOARD :=
FLASH_OFFS :=
FLASH_MAX :=
@@ -54,6 +55,10 @@ OBJECTS += data.o
CFLAGS += -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR)
endif
ifneq ($(strip $(KERNEL_MAGIC)),)
CFLAGS += -DCONFIG_KERNEL_MAGIC=$(KERNEL_MAGIC)
endif
ifneq ($(strip $(KERNEL_CMDLINE)),)
CFLAGS += -DCONFIG_KERNEL_CMDLINE='"$(KERNEL_CMDLINE)"'
endif

View File

@@ -189,7 +189,11 @@ static void lzma_init_data(void)
p = flash_base + flash_ofs;
magic = get_be32(p);
#ifdef CONFIG_KERNEL_MAGIC
if (magic == CONFIG_KERNEL_MAGIC) {
#else
if (magic == IH_MAGIC_OKLI) {
#endif
hdr = (struct image_header *) p;
break;
}

View File

@@ -1,5 +1,5 @@
include ./common-buffalo.mk
include ./common-engenius.mk
include ./common-senao.mk
define Device/buffalo_whr-g301n
$(Device/buffalo_common)
@@ -32,36 +32,41 @@ endef
TARGET_DEVICES += dlink_dir-615-e4
define Device/engenius_eap350-v1
$(Device/engenius_loader_okli)
$(Device/senao_loader_okli)
BLOCKSIZE := 4k
SOC := ar7242
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP350
DEVICE_VARIANT := v1
IMAGE_SIZE := 4864k
LOADER_FLASH_OFFS := 0x1b0000
ENGENIUS_IMGNAME := senao-eap350
IMAGE_SIZE := 4928k
LOADER_FLASH_OFFS := 0x1a0000
SENAO_IMGNAME := senao-eap350
endef
TARGET_DEVICES += engenius_eap350-v1
define Device/engenius_ecb350-v1
$(Device/engenius_loader_okli)
$(Device/senao_loader_okli)
BLOCKSIZE := 4k
SOC := ar7242
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ECB350
DEVICE_VARIANT := v1
IMAGE_SIZE := 4864k
LOADER_FLASH_OFFS := 0x1b0000
ENGENIUS_IMGNAME := senao-ecb350
IMAGE_SIZE := 4928k
LOADER_FLASH_OFFS := 0x1a0000
SENAO_IMGNAME := senao-ecb350
endef
TARGET_DEVICES += engenius_ecb350-v1
define Device/engenius_enh202-v1
$(Device/engenius_loader_okli)
$(Device/senao_loader_okli)
SOC := ar7240
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ENH202
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
IMAGE_SIZE := 4864k
LOADER_FLASH_OFFS := 0x1b0000
ENGENIUS_IMGNAME := senao-enh202
IMAGE_SIZE := 4928k
LOADER_FLASH_OFFS := 0x1a0000
SENAO_IMGNAME := senao-enh202
endef
TARGET_DEVICES += engenius_enh202-v1

View File

@@ -30,7 +30,7 @@ Signed-off-by: Sungbo Eo <mans0n@gorani.run>
uport->cons->cflag = 0;
}
/*
@@ -2108,8 +2110,10 @@ uart_set_options(struct uart_port *port,
@@ -2110,8 +2112,10 @@ uart_set_options(struct uart_port *port,
* Allow the setting of the UART parameters with a NULL console
* too:
*/

View File

@@ -0,0 +1,64 @@
# U-Boot with the datachk patchset requires image sizes, offsets,
# and checksums to be provided in the U-Boot environment.
# This script is based on the dualboot version for devices that come with 2 OS partitions.
# For Senao boards with a "failsafe" partition image, the process is almost the same.
# Instead of booting a secondary instalation on checksum failure,
# the failsafe image is booted instead.
# These boards also use the OKLI lzma kernel loader and mtd-concat
# So the kernel check is for the loader, the rootfs check is for kernel + rootfs
platform_do_upgrade_failsafe_datachk() {
local setenv_script="/tmp/fw_env_upgrade"
local flash_base=0x9f000000
local kernel_mtd=$(find_mtd_index ${KERNEL_PART:-kernel})
local rootfs_mtd=$(find_mtd_index ${ROOTFS_PART:-rootfs})
local kernel_offset=$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)
local rootfs_offset=$(cat /sys/class/mtd/mtd${rootfs_mtd}/offset)
if [ -n "$IMAGE_LIST" ]; then
KERNEL_FILE=$($IMAGE_LIST | grep $KERNEL_FILE)
ROOTFS_FILE=$($IMAGE_LIST | grep $ROOTFS_FILE)
fi
local kernel_size=$($IMAGE_CMD $KERNEL_FILE | wc -c)
local rootfs_size=$($IMAGE_CMD $ROOTFS_FILE | wc -c)
# rootfs without JFFS2
local rootfs_blocks=$((rootfs_size / 4096))
rootfs_size=$((rootfs_blocks * 4096))
local kernel_md5=$($IMAGE_CMD $KERNEL_FILE | md5sum | cut -d ' ' -f1)
local rootfs_md5=$($IMAGE_CMD $ROOTFS_FILE | dd bs=4k count=$rootfs_blocks iflag=fullblock | md5sum | cut -d ' ' -f1)
# prepare new u-boot-env vars
printf "vmlinux_start_addr 0x%08x\n" $((flash_base + kernel_offset)) >> $setenv_script
printf "vmlinux_size 0x%08x\n" ${kernel_size} >> $setenv_script
printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
printf "rootfs_start_addr 0x%08x\n" $((flash_base + rootfs_offset)) >> $setenv_script
printf "rootfs_size 0x%08x\n" ${rootfs_size} >> $setenv_script
printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
# store u-boot-env
mkdir -p /var/lock
fw_setenv -s $setenv_script || {
echo 'failed to update U-Boot environment'
exit 1
}
# sysupgrade
sleep 2
sync
echo 3 > /proc/sys/vm/drop_caches
$IMAGE_CMD $KERNEL_FILE | mtd $MTD_ARGS write - ${KERNEL_PART:-kernel}
sleep 2
sync
if [ -n "$UPGRADE_BACKUP" ]; then
$IMAGE_CMD $ROOTFS_FILE | mtd $MTD_ARGS $MTD_CONFIG_ARGS -j $UPGRADE_BACKUP write - ${ROOTFS_PART:-rootfs}
else
$IMAGE_CMD $ROOTFS_FILE | mtd $MTD_ARGS write - ${ROOTFS_PART:-rootfs}
fi
}

View File

@@ -5,6 +5,9 @@
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
RAMFS_COPY_BIN='fw_setenv'
RAMFS_COPY_DATA='/etc/fw_env.config'
platform_check_image() {
return 0
}
@@ -13,6 +16,17 @@ platform_do_upgrade() {
local board=$(board_name)
case "$board" in
engenius,eap350-v1|\
engenius,ecb350-v1|\
engenius,enh202-v1)
IMAGE_LIST="tar tzf $1"
IMAGE_CMD="tar xzOf $1"
KERNEL_PART="loader"
ROOTFS_PART="fwconcat0"
KERNEL_FILE="uImage-lzma.bin"
ROOTFS_FILE="root.squashfs"
platform_do_upgrade_failsafe_datachk "$1"
;;
*)
default_do_upgrade "$1"
;;

View File

@@ -10,7 +10,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -255,6 +255,10 @@ static void xhci_pci_quirks(struct devic
@@ -257,6 +257,10 @@ static void xhci_pci_quirks(struct devic
pdev->device == 0x3432)
xhci->quirks |= XHCI_BROKEN_STREAMS;

View File

@@ -23,7 +23,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -256,8 +256,10 @@ static void xhci_pci_quirks(struct devic
@@ -258,8 +258,10 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_BROKEN_STREAMS;
if (pdev->vendor == PCI_VENDOR_ID_VIA &&

View File

@@ -10,7 +10,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1240,6 +1240,8 @@ static int c_show(struct seq_file *m, vo
@@ -1249,6 +1249,8 @@ static int c_show(struct seq_file *m, vo
{
int i, j;
u32 cpuid;
@@ -19,7 +19,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
for_each_online_cpu(i) {
/*
@@ -1299,6 +1301,14 @@ static int c_show(struct seq_file *m, vo
@@ -1308,6 +1310,14 @@ static int c_show(struct seq_file *m, vo
seq_printf(m, "Revision\t: %04x\n", system_rev);
seq_printf(m, "Serial\t\t: %s\n", system_serial);

View File

@@ -382,7 +382,7 @@ Cc: linux-rockchip@lists.infradead.org
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -637,11 +637,15 @@ static inline void pci_release_bus_of_no
@@ -643,11 +643,15 @@ static inline void pci_release_bus_of_no
#if defined(CONFIG_OF_ADDRESS)
int devm_of_pci_get_host_bridge_resources(struct device *dev,
unsigned char busno, unsigned char bus_max,

View File

@@ -22,7 +22,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -259,6 +259,7 @@ static void xhci_pci_quirks(struct devic
@@ -261,6 +261,7 @@ static void xhci_pci_quirks(struct devic
pdev->device == 0x3483) {
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;

View File

@@ -66,7 +66,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5404,8 +5404,7 @@ static inline void skb_gro_reset_offset(
@@ -5423,8 +5423,7 @@ static inline void skb_gro_reset_offset(
NAPI_GRO_CB(skb)->frag0 = NULL;
NAPI_GRO_CB(skb)->frag0_len = 0;

View File

@@ -17,7 +17,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1153,6 +1153,64 @@ mt7530_port_vlan_del(struct dsa_switch *
@@ -1145,6 +1145,64 @@ mt7530_port_vlan_del(struct dsa_switch *
return 0;
}
@@ -82,7 +82,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
static enum dsa_tag_protocol
mtk_get_tag_protocol(struct dsa_switch *ds, int port)
{
@@ -1530,6 +1588,8 @@ static const struct dsa_switch_ops mt753
@@ -1522,6 +1580,8 @@ static const struct dsa_switch_ops mt753
.port_vlan_prepare = mt7530_port_vlan_prepare,
.port_vlan_add = mt7530_port_vlan_add,
.port_vlan_del = mt7530_port_vlan_del,

View File

@@ -101,7 +101,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
return 0;
/* Do not deprogram the CPU port as it may be shared with other user
@@ -1118,7 +1118,7 @@ static int dsa_slave_vlan_rx_add_vid(str
@@ -1120,7 +1120,7 @@ static int dsa_slave_vlan_rx_add_vid(str
* need to emulate the switchdev prepare + commit phase.
*/
if (dp->bridge_dev) {
@@ -110,7 +110,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
return 0;
/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
@@ -1152,7 +1152,7 @@ static int dsa_slave_vlan_rx_kill_vid(st
@@ -1154,7 +1154,7 @@ static int dsa_slave_vlan_rx_kill_vid(st
* need to emulate the switchdev prepare + commit phase.
*/
if (dp->bridge_dev) {

View File

@@ -15,7 +15,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1093,12 +1093,6 @@ mt7530_port_vlan_add(struct dsa_switch *
@@ -1085,12 +1085,6 @@ mt7530_port_vlan_add(struct dsa_switch *
struct mt7530_priv *priv = ds->priv;
u16 vid;
@@ -28,7 +28,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
mutex_lock(&priv->reg_mutex);
for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
@@ -1124,12 +1118,6 @@ mt7530_port_vlan_del(struct dsa_switch *
@@ -1116,12 +1110,6 @@ mt7530_port_vlan_del(struct dsa_switch *
struct mt7530_priv *priv = ds->priv;
u16 vid, pvid;
@@ -41,7 +41,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
mutex_lock(&priv->reg_mutex);
pvid = priv->ports[port].pvid;
@@ -1242,6 +1230,7 @@ mt7530_setup(struct dsa_switch *ds)
@@ -1234,6 +1222,7 @@ mt7530_setup(struct dsa_switch *ds)
* as two netdev instances.
*/
dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;

View File

@@ -10,7 +10,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2211,6 +2211,28 @@ static int mtk_start_dma(struct mtk_eth
@@ -2232,6 +2232,28 @@ static int mtk_start_dma(struct mtk_eth
return 0;
}
@@ -39,7 +39,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
static int mtk_open(struct net_device *dev)
{
struct mtk_mac *mac = netdev_priv(dev);
@@ -2406,8 +2428,6 @@ static int mtk_hw_init(struct mtk_eth *e
@@ -2427,8 +2449,6 @@ static int mtk_hw_init(struct mtk_eth *e
mtk_w32(eth, 0, MTK_QDMA_DELAY_INT);
mtk_tx_irq_disable(eth, ~0);
mtk_rx_irq_disable(eth, ~0);
@@ -48,7 +48,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
/* FE int grouping */
mtk_w32(eth, MTK_TX_DONE_INT, MTK_PDMA_INT_GRP1);
@@ -2416,18 +2436,7 @@ static int mtk_hw_init(struct mtk_eth *e
@@ -2437,18 +2457,7 @@ static int mtk_hw_init(struct mtk_eth *e
mtk_w32(eth, MTK_RX_DONE_INT, MTK_QDMA_INT_GRP2);
mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP);

View File

@@ -15,7 +15,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2215,6 +2215,9 @@ static void mtk_gdm_config(struct mtk_et
@@ -2236,6 +2236,9 @@ static void mtk_gdm_config(struct mtk_et
{
int i;
@@ -25,7 +25,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
for (i = 0; i < MTK_MAC_COUNT; i++) {
u32 val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i));
@@ -2253,6 +2256,8 @@ static int mtk_open(struct net_device *d
@@ -2274,6 +2277,8 @@ static int mtk_open(struct net_device *d
if (err)
return err;
@@ -34,7 +34,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
napi_enable(&eth->tx_napi);
napi_enable(&eth->rx_napi);
mtk_tx_irq_enable(eth, MTK_TX_DONE_INT);
@@ -2436,8 +2441,6 @@ static int mtk_hw_init(struct mtk_eth *e
@@ -2457,8 +2462,6 @@ static int mtk_hw_init(struct mtk_eth *e
mtk_w32(eth, MTK_RX_DONE_INT, MTK_QDMA_INT_GRP2);
mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP);

View File

@@ -12,7 +12,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2310,6 +2310,8 @@ static int mtk_stop(struct net_device *d
@@ -2331,6 +2331,8 @@ static int mtk_stop(struct net_device *d
if (!refcount_dec_and_test(&eth->dma_refcnt))
return 0;

View File

@@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1590,7 +1590,9 @@ static void dsa_slave_switchdev_event_wo
@@ -1592,7 +1592,9 @@ static void dsa_slave_switchdev_event_wo
err = dsa_port_fdb_add(dp, fdb_info->addr, fdb_info->vid);
if (err) {
@@ -36,7 +36,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
break;
}
fdb_info->offloaded = true;
@@ -1605,9 +1607,11 @@ static void dsa_slave_switchdev_event_wo
@@ -1607,9 +1609,11 @@ static void dsa_slave_switchdev_event_wo
err = dsa_port_fdb_del(dp, fdb_info->addr, fdb_info->vid);
if (err) {

View File

@@ -54,7 +54,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct sk_buff * (*xmit)(struct sk_buff *skb,
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1565,76 +1565,66 @@ static int dsa_slave_netdevice_event(str
@@ -1567,76 +1567,66 @@ static int dsa_slave_netdevice_event(str
return NOTIFY_DONE;
}
@@ -167,7 +167,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
}
/* Called under rcu_read_lock() */
@@ -1642,7 +1632,9 @@ static int dsa_slave_switchdev_event(str
@@ -1644,7 +1634,9 @@ static int dsa_slave_switchdev_event(str
unsigned long event, void *ptr)
{
struct net_device *dev = switchdev_notifier_info_to_dev(ptr);
@@ -177,7 +177,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
int err;
if (event == SWITCHDEV_PORT_ATTR_SET) {
@@ -1655,20 +1647,32 @@ static int dsa_slave_switchdev_event(str
@@ -1657,20 +1649,32 @@ static int dsa_slave_switchdev_event(str
if (!dsa_slave_dev_check(dev))
return NOTIFY_DONE;
@@ -213,7 +213,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_hold(dev);
break;
default:
@@ -1678,10 +1682,6 @@ static int dsa_slave_switchdev_event(str
@@ -1680,10 +1684,6 @@ static int dsa_slave_switchdev_event(str
dsa_schedule_work(&switchdev_work->work);
return NOTIFY_OK;

View File

@@ -20,7 +20,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1637,31 +1637,29 @@ static int dsa_slave_switchdev_event(str
@@ -1639,31 +1639,29 @@ static int dsa_slave_switchdev_event(str
struct dsa_port *dp;
int err;
@@ -68,7 +68,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fdb_info = ptr;
if (!fdb_info->added_by_user) {
@@ -1674,13 +1672,12 @@ static int dsa_slave_switchdev_event(str
@@ -1676,13 +1674,12 @@ static int dsa_slave_switchdev_event(str
switchdev_work->vid = fdb_info->vid;
dev_hold(dev);

View File

@@ -30,7 +30,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1650,6 +1650,9 @@ static int dsa_slave_switchdev_event(str
@@ -1652,6 +1652,9 @@ static int dsa_slave_switchdev_event(str
dp = dsa_slave_to_port(dev);

View File

@@ -172,7 +172,7 @@ Signed-off-by: DENG Qingfang <dqfext@gmail.com>
*/
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1627,6 +1627,25 @@ static void dsa_slave_switchdev_event_wo
@@ -1629,6 +1629,25 @@ static void dsa_slave_switchdev_event_wo
dev_put(dp->slave);
}
@@ -198,7 +198,7 @@ Signed-off-by: DENG Qingfang <dqfext@gmail.com>
/* Called under rcu_read_lock() */
static int dsa_slave_switchdev_event(struct notifier_block *unused,
unsigned long event, void *ptr)
@@ -1645,10 +1664,37 @@ static int dsa_slave_switchdev_event(str
@@ -1647,10 +1666,37 @@ static int dsa_slave_switchdev_event(str
return notifier_from_errno(err);
case SWITCHDEV_FDB_ADD_TO_DEVICE:
case SWITCHDEV_FDB_DEL_TO_DEVICE:
@@ -239,7 +239,7 @@ Signed-off-by: DENG Qingfang <dqfext@gmail.com>
if (!dp->ds->ops->port_fdb_add || !dp->ds->ops->port_fdb_del)
return NOTIFY_DONE;
@@ -1663,18 +1709,13 @@ static int dsa_slave_switchdev_event(str
@@ -1665,18 +1711,13 @@ static int dsa_slave_switchdev_event(str
switchdev_work->port = dp->index;
switchdev_work->event = event;

View File

@@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -570,12 +570,13 @@ extern struct Qdisc_ops noop_qdisc_ops;
@@ -603,12 +603,13 @@ extern struct Qdisc_ops noop_qdisc_ops;
extern struct Qdisc_ops pfifo_fast_ops;
extern struct Qdisc_ops mq_qdisc_ops;
extern struct Qdisc_ops noqueue_qdisc_ops;
@@ -82,8 +82,8 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
+const struct Qdisc_ops *default_qdisc_ops = &fq_codel_qdisc_ops;
EXPORT_SYMBOL(default_qdisc_ops);
/* Main transmission queue. */
@@ -1035,12 +1035,12 @@ static void attach_one_default_qdisc(str
static void qdisc_maybe_clear_missed(struct Qdisc *q,
@@ -1079,12 +1079,12 @@ static void attach_one_default_qdisc(str
void *_unused)
{
struct Qdisc *qdisc;

View File

@@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -595,211 +595,6 @@ struct Qdisc_ops noqueue_qdisc_ops __rea
@@ -620,230 +620,6 @@ struct Qdisc_ops noqueue_qdisc_ops __rea
.owner = THIS_MODULE,
};
@@ -64,8 +64,10 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
-{
- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
- struct sk_buff *skb = NULL;
- bool need_retry = true;
- int band;
-
-retry:
- for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
- struct skb_array *q = band2list(priv, band);
-
@@ -76,6 +78,23 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
- }
- if (likely(skb)) {
- qdisc_update_stats_at_dequeue(qdisc, skb);
- } else if (need_retry &&
- test_bit(__QDISC_STATE_MISSED, &qdisc->state)) {
- /* Delay clearing the STATE_MISSED here to reduce
- * the overhead of the second spin_trylock() in
- * qdisc_run_begin() and __netif_schedule() calling
- * in qdisc_run_end().
- */
- clear_bit(__QDISC_STATE_MISSED, &qdisc->state);
-
- /* Make sure dequeuing happens after clearing
- * STATE_MISSED.
- */
- smp_mb__after_atomic();
-
- need_retry = false;
-
- goto retry;
- } else {
- WRITE_ONCE(qdisc->empty, true);
- }

Some files were not shown because too many files have changed in this diff Show More