OpenWrt v21.02.6: adjust config defaults

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

.github/issue_template

@@ -1,13 +0,0 @@
-This repository is a mirror of our main repo at https://git.openwrt.org/openwrt/openwrt.git
-It is for reference only and is not active for checkins or for reporting issues.
-
-All issues should be reported at: https://bugs.openwrt.org
-
-Please do not open any NEW issue here - we will be closing the Github issues
-capability in the near future.
-
-We will continue to accept Pull Requests here as described in the repo description.
-
-Close this now and click here: https://bugs.openwrt.org
-
-Thankyou for your co-operation.

.github/labeler.yml

@@ -0,0 +1,103 @@
+# target/*
+"target/airoha":
+  - "target/linux/airoha/**"
+"target/apm821xx":
+  - "target/linux/apm821xx/**"
+"target/archs38":
+  - "target/linux/archs38/**"
+"target/armvirt":
+  - "target/linux/armvirt/**"
+"target/at91":
+  - "target/linux/at91/**"
+"target/ath25":
+  - "target/linux/ath25/**"
+"target/ath79":
+  - "target/linux/ath79/**"
+"target/bcm27xx":
+  - "target/linux/bcm27xx/**"
+"target/bcm47xx":
+  - "target/linux/bcm47xx/**"
+"target/bcm4908":
+  - "target/linux/bcm4908/**"
+"target/bcm53xx":
+  - "target/linux/bcm53xx/**"
+"target/bcm63xx":
+  - "target/linux/bcm63xx/**"
+"target/bmips":
+  - "target/linux/bmips/**"
+"target/gemini":
+  - "target/linux/gemini/**"
+"target/imx":
+  - "target/linux/imx/**"
+"target/ipq40xx":
+  - "target/linux/ipq40xx/**"
+"target/ipq806x":
+  - "target/linux/ipq806x/**"
+"target/kirkwood":
+  - "target/linux/kirkwood/**"
+"target/lantiq":
+  - "target/linux/lantiq/**"
+"target/layerscape":
+  - "target/linux/layerscape/**"
+"target/malta":
+  - "target/linux/malta/**"
+"target/mediatek":
+  - "target/linux/mediatek/**"
+"target/mpc85xx":
+  - "target/linux/mpc85xx/**"
+"target/mvebu":
+  - "target/linux/mvebu/**"
+"target/mxs":
+  - "target/linux/mxs/**"
+"target/octeon":
+  - "target/linux/octeon/**"
+"target/octeontx":
+  - "target/linux/octeontx/**"
+"target/omap":
+  - "target/linux/omap/**"
+"target/oxnas":
+  - "target/linux/oxnas/**"
+"target/pistachio":
+  - "target/linux/pistachio/**"
+"target/qoriq":
+  - "target/linux/qoriq/**"
+"target/ramips":
+  - "target/linux/ramips/**"
+"target/realtek":
+  - "target/linux/realtek/**"
+"target/rockchip":
+  - "target/linux/rockchip/**"
+"target/sunxi":
+  - "target/linux/sunxi/**"
+"target/tegra":
+  - "target/linux/tegra/**"
+"target/uml":
+  - "target/linux/uml/**"
+"target/x86":
+  - "target/linux/x86/**"
+"target/zynq":
+  - "target/linux/zynq/**"
+# target/imagebuilder
+"target/imagebuilder":
+  - "target/imagebuilder/**"
+# kernel
+"kernel":
+  - "target/linux/generic/**"
+  - "target/linux/**/config-*"
+  - "target/linux/**/patches-*"
+  - "target/linux/**/files/**"
+  - "package/kernel/linux/**"
+# core packages
+"core packages":
+  - "package/**"
+# build/scripts/tools
+"build/scripts/tools":
+  - "include/**"
+  - "scripts/**"
+  - "tools/**"
+# toolchain
+"toolchain":
+  - "toolchain/**"
+# GitHub/CI
+"GitHub/CI":
+  - ".github/**"

.github/workflows/Dockerfile.tools

@@ -0,0 +1,3 @@
+FROM registry.gitlab.com/openwrt/buildbot/buildworker-3.4.1
+
+COPY --chown=buildbot:buildbot tools.tar /tools.tar

.github/workflows/build.yml

@@ -0,0 +1,361 @@
+name: Build sub target
+
+on:
+  workflow_call:
+    inputs:
+      target:
+        required: true
+        type: string
+      testing:
+        type: boolean
+      build_toolchain:
+        type: boolean
+      include_feeds:
+        type: boolean
+      build_full:
+        type: boolean
+      build_all_modules:
+        type: boolean
+      build_all_kmods:
+        type: boolean
+      build_all_boards:
+        type: boolean
+
+permissions:
+  contents: read
+
+jobs:
+  setup_build:
+    name: Setup build
+    runs-on: ubuntu-latest
+    outputs:
+      owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
+      ccache_hash: ${{ steps.ccache_hash.outputs.ccache_hash }}
+      container_tag: ${{ steps.determine_tools_container.outputs.container_tag }}
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Set lower case owner name
+        id: lower_owner
+        run: |
+          OWNER_LC=$(echo "${{ github.repository_owner }}" \
+            | tr '[:upper:]' '[:lower:]')
+          echo "owner_lc=$OWNER_LC" >> $GITHUB_OUTPUT
+
+      - name: Generate ccache hash
+        id: ccache_hash
+        run: |
+          CCACHE_HASH=$(md5sum include/kernel-* | awk '{ print $1 }' \
+           | md5sum | awk '{ print $1 }')
+          echo "ccache_hash=$CCACHE_HASH" >> $GITHUB_OUTPUT
+
+      # Per branch tools container tag
+      # By default stick to latest
+      # For official test targetting openwrt stable branch
+      # Get the branch or parse the tag and push dedicated tools containers
+      # For local test to use the correct container for stable release testing
+      # you need to use for the branch name a prefix of openwrt-[0-9][0-9].[0-9][0-9]-
+      - name: Determine tools container tag
+        id: determine_tools_container
+        run: |
+          CONTAINER_TAG=latest
+          if [ -n "${{ github.base_ref }}" ]; then
+            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG="${{ github.base_ref }}"
+            fi
+          elif [ ${{ github.ref_type }} == "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG=${{ github.ref_name }}
+            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
+              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\)-.*/\1/')"
+            fi
+          elif [ ${{ github.ref_type }} == "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/^v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+          echo "Tools container to use tools:$CONTAINER_TAG"
+          echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
+
+  build:
+    name: Build with external toolchain
+    needs: setup_build
+    runs-on: ubuntu-latest
+
+    container: ghcr.io/${{ needs.setup_build.outputs.owner_lc }}/tools:${{ needs.setup_build.outputs.container_tag }}
+
+    permissions:
+      contents: read
+      packages: read
+
+    steps:
+      - name: Checkout master directory
+        uses: actions/checkout@v3
+        with:
+          path: openwrt
+
+      - name: Checkout packages feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/packages
+          path: openwrt/feeds/packages
+
+      - name: Checkout luci feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/luci
+          path: openwrt/feeds/luci
+
+      - name: Checkout routing feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/routing
+          path: openwrt/feeds/routing
+
+      - name: Checkout telephony feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/telephony
+          path: openwrt/feeds/telephony
+
+      - name: Fix permission
+        run: |
+          chown -R buildbot:buildbot openwrt
+
+      - name: Initialization environment
+        run: |
+          TARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 1)
+          SUBTARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 2)
+          echo "TARGET=$TARGET" >> "$GITHUB_ENV"
+          echo "SUBTARGET=$SUBTARGET" >> "$GITHUB_ENV"
+
+      - name: Update & Install feeds
+        if: inputs.include_feeds == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          ./scripts/feeds update -a
+          ./scripts/feeds install -a
+
+      - name: Parse toolchain file
+        if: inputs.build_toolchain == false
+        id: parse-toolchain
+        working-directory: openwrt
+        run: |
+          TOOLCHAIN_PATH=snapshots
+
+          if [ -n "${{ github.base_ref }}" ]; then
+            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              major_ver="$(echo ${{ github.base_ref }} | sed 's/^openwrt-/v/')"
+            fi
+          elif [ "${{ github.ref_type }}" = "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              major_ver="$(echo ${{ github.ref_name }} | sed 's/^openwrt-/v/')"
+            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
+              major_ver="$(echo ${{ github.ref_name }} | sed 's/^openwrt-\([0-9][0-9]\.[0-9][0-9]\)-.*/v\1/')"
+            fi
+          elif [ "${{ github.ref_type }}" = "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              major_ver="$(echo ${{ github.ref_name }} | sed 's/^\(v[0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+
+          if [ -n "$major_ver" ]; then
+            git fetch --tags -f
+            latest_tag="$(git tag --sort=-creatordate -l $major_ver* | head -n1)"
+            if [ -n "$latest_tag" ]; then
+              TOOLCHAIN_PATH=releases/$(echo $latest_tag | sed 's/^v//')
+            fi
+          fi
+
+          SUMS_FILE="https://downloads.cdn.openwrt.org/$TOOLCHAIN_PATH/targets/${{ env.TARGET }}/${{ env.SUBTARGET }}/sha256sums"
+          if curl $SUMS_FILE | grep -q ".*openwrt-toolchain.*tar.xz"; then
+            TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-toolchain.*tar.xz")"
+            TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-toolchain.*\).tar.xz/\1/p')
+            TOOLCHAIN_SHA256=$(echo "$TOOLCHAIN_STRING" | cut -d ' ' -f 1)
+            
+            echo "toolchain-type=external_toolchain" >> $GITHUB_OUTPUT
+          elif curl $SUMS_FILE | grep -q ".*openwrt-sdk.*tar.xz"; then
+            TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-sdk.*tar.xz")"
+            TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-sdk.*\).tar.xz/\1/p')
+            TOOLCHAIN_SHA256=$(echo "$TOOLCHAIN_STRING" | cut -d ' ' -f 1)
+
+            echo "toolchain-type=external_sdk" >> $GITHUB_OUTPUT
+          fi
+
+          echo "TOOLCHAIN_FILE=$TOOLCHAIN_FILE" >> "$GITHUB_ENV"
+          echo "TOOLCHAIN_SHA256=$TOOLCHAIN_SHA256" >> "$GITHUB_ENV"
+          echo "TOOLCHAIN_PATH=$TOOLCHAIN_PATH" >> "$GITHUB_ENV"
+
+      - name: Cache external toolchain/sdk
+        if: inputs.build_toolchain == false
+        id: cache-external-toolchain
+        uses: actions/cache@v3
+        with:
+          path: openwrt/${{ env.TOOLCHAIN_FILE }}
+          key: ${{ env.TOOLCHAIN_FILE }}-${{ steps.parse-toolchain.outputs.toolchain-type }}-${{ env.TOOLCHAIN_SHA256 }}
+
+      - name: Cache ccache
+        uses: actions/cache@v3
+        with:
+          path: openwrt/.ccache
+          key: ccache-kernel-${{ env.TARGET }}/${{ env.SUBTARGET }}-${{ needs.setup_build.outputs.ccache_hash }}
+          restore-keys: |
+            ccache-kernel-${{ env.TARGET }}/${{ env.SUBTARGET }}-
+
+      - name: Download external toolchain/sdk
+        if: inputs.build_toolchain == false && steps.cache-external-toolchain.outputs.cache-hit != 'true'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          wget -O - https://downloads.cdn.openwrt.org/${{ env.TOOLCHAIN_PATH }}/targets/${{ env.TARGET }}/${{ env.SUBTARGET }}/${{ env.TOOLCHAIN_FILE }}.tar.xz \
+            | tar --xz -xf -
+
+      - name: Extract prebuilt tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: ./scripts/ext-tools.sh --tools /tools.tar
+
+      - name: Configure testing kernel
+        if: inputs.testing == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_TESTING_KERNEL=y >> .config
+
+      - name: Configure all kernel modules
+        if: inputs.build_all_kmods == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_ALL_KMODS=y >> .config
+
+      - name: Configure all modules
+        if: inputs.build_all_modules == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_ALL=y >> .config
+
+      - name: Configure all boards
+        if: inputs.build_all_boards == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_TARGET_MULTI_PROFILE=y >> .config
+          echo CONFIG_TARGET_PER_DEVICE_ROOTFS=y >> .config
+          echo CONFIG_TARGET_ALL_PROFILES=y >> .config
+
+      - name: Configure external toolchain
+        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_toolchain'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          ./scripts/ext-toolchain.sh \
+            --toolchain ${{ env.TOOLCHAIN_FILE }}/toolchain-* \
+            --overwrite-config \
+            --config ${{ env.TARGET }}/${{ env.SUBTARGET }}
+
+      - name: Adapt external sdk to external toolchain format
+        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk' && steps.cache-external-toolchain.outputs.cache-hit != 'true'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          TOOLCHAIN_DIR=${{ env.TOOLCHAIN_FILE }}/staging_dir/$(ls ${{ env.TOOLCHAIN_FILE }}/staging_dir | grep toolchain)
+          TOOLCHAIN_BIN=$TOOLCHAIN_DIR/bin
+          OPENWRT_DIR=$(pwd)
+
+          # Find target name from toolchain info.mk
+          GNU_TARGET_NAME=$(cat $TOOLCHAIN_DIR/info.mk | grep TARGET_CROSS | sed 's/^TARGET_CROSS=\(.*\)-$/\1/')
+
+          cd $TOOLCHAIN_BIN
+
+          # Revert sdk wrapper scripts applied to all the bins
+          for app in $(find . -name "*.bin"); do
+            TARGET_APP=$(echo $app | sed 's/\.\/\.\(.*\)\.bin/\1/')
+            rm $TARGET_APP
+            mv .$TARGET_APP.bin $TARGET_APP
+          done
+
+          # Setup the wrapper script in the sdk toolchain dir simulating an external toolchain build
+          cp $OPENWRT_DIR/target/toolchain/files/wrapper.sh $GNU_TARGET_NAME-wrapper.sh
+          for app in cc gcc g++ c++ cpp ld as ; do
+            [ -f $GNU_TARGET_NAME-$app ] && mv $GNU_TARGET_NAME-$app $GNU_TARGET_NAME-$app.bin
+            ln -sf $GNU_TARGET_NAME-wrapper.sh $GNU_TARGET_NAME-$app
+          done
+
+      - name: Configure external toolchain with sdk
+        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          ./scripts/ext-toolchain.sh \
+            --toolchain ${{ env.TOOLCHAIN_FILE }}/staging_dir/toolchain-* \
+            --overwrite-config \
+            --config ${{ env.TARGET }}/${{ env.SUBTARGET }}
+
+      - name: Configure internal toolchain
+        if: inputs.build_toolchain == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          echo "CONFIG_TARGET_${{ env.TARGET }}=y" >> .config
+          echo "CONFIG_TARGET_${{ env.TARGET }}_${{ env.SUBTARGET }}=y" >> .config
+
+          make defconfig
+
+      - name: Show configuration
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: ./scripts/diffconfig.sh
+
+      - name: Build tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build toolchain
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make toolchain/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build Kernel
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make target/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build Kernel Kmods
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make package/linux/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build everything
+        if: inputs.build_full == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Upload logs
+        if: failure()
+        uses: actions/upload-artifact@v3
+        with:
+          name: ${{ env.TARGET }}-${{ env.SUBTARGET }}-logs
+          path: "openwrt/logs"

.github/workflows/check-kernel-patches.yml

@@ -0,0 +1,131 @@
+name: Refresh kernel for target
+
+on:
+  workflow_call:
+    inputs:
+      target:
+        required: true
+        type: string
+      testing:
+        type: boolean
+
+permissions:
+  contents: read
+
+jobs:
+  setup_build:
+    name: Setup build
+    runs-on: ubuntu-latest
+    outputs:
+      owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
+      container_tag: ${{ steps.determine_tools_container.outputs.container_tag }}
+
+    steps:
+      - name: Set lower case owner name
+        id: lower_owner
+        run: |
+          OWNER_LC=$(echo "${{ github.repository_owner }}" \
+            | tr '[:upper:]' '[:lower:]')
+          echo "owner_lc=$OWNER_LC" >> $GITHUB_OUTPUT
+
+      # Per branch tools container tag
+      # By default stick to latest
+      # For official test targetting openwrt stable branch
+      # Get the branch or parse the tag and push dedicated tools containers
+      # For local test to use the correct container for stable release testing
+      # you need to use for the branch name a prefix of openwrt-[0-9][0-9].[0-9][0-9]-
+      - name: Determine tools container tag
+        id: determine_tools_container
+        run: |
+          CONTAINER_TAG=latest
+          if [ -n "${{ github.base_ref }}" ]; then
+            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG="${{ github.base_ref }}"
+            fi
+          elif [ ${{ github.ref_type }} == "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG=${{ github.ref_name }}
+            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
+              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\)-.*/\1/')"
+            fi
+          elif [ ${{ github.ref_type }} == "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/^v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+          echo "Tools container to use tools:$CONTAINER_TAG"
+          echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
+
+  check-patch:
+    name: Check Kernel patches
+    needs: setup_build
+    runs-on: ubuntu-latest
+
+    container: ghcr.io/${{ needs.setup_build.outputs.owner_lc }}/tools:${{ needs.setup_build.outputs.container_tag }}
+
+    permissions:
+      contents: read
+      packages: read
+
+    steps:
+      - name: Checkout master directory
+        uses: actions/checkout@v3
+        with:
+          path: openwrt
+
+      - name: Fix permission
+        run: |
+          chown -R buildbot:buildbot openwrt
+
+      - name: Initialization environment
+        run: |
+          TARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 1)
+          SUBTARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 2)
+          echo "TARGET=$TARGET" >> "$GITHUB_ENV"
+          echo "SUBTARGET=$SUBTARGET" >> "$GITHUB_ENV"
+
+      - name: Extract prebuilt tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: ./scripts/ext-tools.sh --tools /tools.tar
+
+      - name: Configure testing kernel
+        if: inputs.testing == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_TESTING_KERNEL=y >> .config
+
+      - name: Configure system
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_ALL_KMODS=y >> .config
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          echo "CONFIG_TARGET_${{ env.TARGET }}=y" >> .config
+          echo "CONFIG_TARGET_${{ env.TARGET }}_${{ env.SUBTARGET }}=y" >> .config
+
+          make defconfig
+
+      - name: Build tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make tools/quilt/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Refresh Kernel patches
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          make target/linux/refresh V=s
+
+          . .github/workflows/scripts/ci_helpers.sh
+
+          if git diff --name-only --exit-code; then
+            success "Kernel patches for ${{ env.TARGET }}/${{ env.SUBTARGET }} seems ok"
+          else
+            err "Kernel patches for ${{ env.TARGET }}/${{ env.SUBTARGET }} require refresh. (run 'make target/linux/refresh' and force push this pr)"
+            exit 1
+          fi

.github/workflows/formal.yml

@@ -0,0 +1,73 @@
+name: Test Formalities
+
+on:
+  pull_request:
+
+permissions:
+  contents: read
+
+jobs:
+  build:
+    name: Test Formalities
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+
+    steps:
+      - uses: actions/checkout@v3
+        with:
+          ref: ${{ github.event.pull_request.head.sha }}
+          fetch-depth: 0
+
+      - name: Determine branch name
+        run: |
+          BRANCH="${GITHUB_BASE_REF#refs/heads/}"
+          echo "Building for $BRANCH"
+          echo "BRANCH=$BRANCH" >> $GITHUB_ENV
+
+      - name: Test formalities
+        run: |
+          source .github/workflows/scripts/ci_helpers.sh
+
+          RET=0
+          for commit in $(git rev-list HEAD ^origin/$BRANCH); do
+            info "=== Checking commit '$commit'"
+            if git show --format='%P' -s $commit | grep -qF ' '; then
+              err "Pull request should not include merge commits"
+              RET=1
+            fi
+
+            author="$(git show -s --format=%aN $commit)"
+            if echo $author | grep -q '\S\+\s\+\S\+'; then
+              success "Author name ($author) seems ok"
+            else
+              err "Author name ($author) need to be your real name 'firstname lastname'"
+              RET=1
+            fi
+
+            subject="$(git show -s --format=%s $commit)"
+            if echo "$subject" | grep -q -e '^[0-9A-Za-z,+/_\.-]\+: ' -e '^Revert '; then
+              success "Commit subject line seems ok ($subject)"
+            else
+              err "Commit subject line MUST start with '<area>: ' ($subject)"
+              RET=1
+            fi
+
+            body="$(git show -s --format=%b $commit)"
+            sob="$(git show -s --format='Signed-off-by: %aN <%aE>' $commit)"
+            if echo "$body" | grep -qF "$sob"; then
+              success "Signed-off-by match author"
+            else
+              err "Signed-off-by is missing or doesn't match author (should be '$sob')"
+              RET=1
+            fi
+
+            if echo "$body" | grep -v "Signed-off-by:"; then
+              success "A commit message exists"
+            else
+              err "Missing commit message. Please describe your changes"
+              RET=1
+            fi
+          done
+
+          exit $RET

.github/workflows/kernel.yml

@@ -0,0 +1,85 @@
+name: Build Kernel
+
+on:
+  pull_request:
+    paths:
+      - '.github/workflows/check-kernel-patches.yml'
+      - '.github/workflows/build.yml'
+      - '.github/workflows/kernel.yml'
+      - 'include/kernel*'
+      - 'package/kernel/**'
+      - 'target/linux/generic/**'
+  push:
+    paths:
+      - '.github/workflows/check-kernel-patches.yml'
+      - '.github/workflows/build.yml'
+      - '.github/workflows/kernel.yml'
+      - 'include/kernel*'
+      - 'package/kernel/**'
+      - 'target/linux/generic/**'
+
+permissions:
+  contents: read
+
+jobs:
+  determine_targets:
+    name: Set targets
+    runs-on: ubuntu-latest
+    outputs:
+      target: ${{ steps.find_targets.outputs.target }}
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Set targets
+        id: find_targets
+        run: |
+          export TARGETS="$(perl ./scripts/dump-target-info.pl targets 2>/dev/null \
+            | sort -u -t '/' -k1,1 \
+            | awk '{ print $1 }')"
+
+          JSON='['
+          FIRST=1
+          for TARGET in $TARGETS; do
+            [[ $FIRST -ne 1 ]] && JSON="$JSON"','
+            JSON="$JSON"'"'"${TARGET}"'"'
+            FIRST=0
+          done
+          JSON="$JSON"']'
+
+           echo -e "\n---- targets ----\n"
+           echo "$JSON"
+           echo -e "\n---- targets ----\n"
+
+           echo "target=$JSON" >> $GITHUB_OUTPUT
+
+  build:
+    name: Build Kernel with external toolchain
+    needs: determine_targets
+    permissions:
+      contents: read
+      packages: read
+    strategy:
+       fail-fast: False
+       matrix:
+         target: ${{fromJson(needs.determine_targets.outputs.target)}}
+    uses: ./.github/workflows/build.yml
+    with:
+      target: ${{ matrix.target }}
+      build_all_kmods: true
+
+  check-kernel-patches:
+    name: Check Kernel patches
+    needs: determine_targets
+    permissions:
+      contents: read
+      packages: read
+    strategy:
+       fail-fast: False
+       matrix:
+         target: ${{fromJson(needs.determine_targets.outputs.target)}}
+    uses: ./.github/workflows/check-kernel-patches.yml
+    with:
+      target: ${{ matrix.target }}
+

.github/workflows/labeler.yml

@@ -0,0 +1,33 @@
+name: 'Pull Request Labeler'
+on:
+  - pull_request_target
+
+permissions:
+  contents: read
+
+jobs:
+  labeler:
+    permissions:
+      contents: read # to determine modified files (actions/labeler)
+      pull-requests: write # to add labels to PRs (actions/labeler)
+
+    name: Pull Request Labeler
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/labeler@v4
+        with:
+          repo-token: '${{ secrets.GITHUB_TOKEN }}'
+
+      - name: Check Branch
+        id: check-branch
+        run: |
+          if echo "${{ github.base_ref }}" | grep -q -E 'openwrt-[0-9][0-9]\.[0-9][0-9]'; then
+              echo "release-tag=$(echo ${{ github.base_ref }} | sed 's/openwrt-/release\//')" >> $GITHUB_OUTPUT
+          fi
+
+      - uses: buildsville/add-remove-label@v2.0.0
+        if: ${{ steps.check-branch.outputs.release-tag }}
+        with:
+          token: ${{secrets.GITHUB_TOKEN}}
+          labels: ${{ steps.check-branch.outputs.release-tag }}
+          type: add

.github/workflows/packages.yml

@@ -0,0 +1,43 @@
+name: Build all core packages
+
+on:
+  pull_request:
+    paths:
+      - '.github/workflows/build.yml'
+      - '.github/workflows/packages.yml'
+      - 'config/**'
+      - 'include/**'
+      - 'package/**'
+      - 'target/linux/generic/**'
+      - 'toolchain/**'
+  push:
+    paths:
+      - '.github/workflows/build.yml'
+      - '.github/workflows/packages.yml'
+      - 'config/**'
+      - 'include/**'
+      - 'package/**'
+      - 'target/linux/generic/**'
+      - 'toolchain/**'
+
+permissions:
+  contents: read
+
+jobs:
+  build:
+    permissions:
+      contents: read
+      packages: read
+    strategy:
+      fail-fast: False
+      matrix:
+        include:
+          - target: malta/be
+          - target: x86/64
+    uses: ./.github/workflows/build.yml
+    with:
+      target: ${{ matrix.target }}
+      build_all_kmods: true
+      build_all_modules: true
+      build_full: true
+

.github/workflows/scripts/ci_helpers.sh

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+color_out() {
+	printf "\e[0;$1m%s\e[0;0m\n" "$2"
+}
+
+success() {
+	color_out 32 "$1"
+}
+
+info() {
+	color_out 36 "$1"
+}
+
+err() {
+	color_out 31 "$1"
+}
+
+warn() {
+	color_out 33 "$1"
+}
+
+err_die() {
+	err "$1"
+	exit 1
+}

.github/workflows/scripts/show_build_failures.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+original_exit_code="${ret:-1}"
+log_dir_path="${1:-logs}"
+context="${2:-10}"
+
+show_make_build_errors() {
+	grep -slr 'make\[[[:digit:]]\].*Error [[:digit:]]$' "$log_dir_path" | while IFS= read -r log_file; do
+		printf "====== Make errors from %s ======\n" "$log_file";
+		grep -r -C"$context" 'make\[[[:digit:]]\].*Error [[:digit:]]$' "$log_file" ;
+	done
+}
+
+show_make_build_errors
+exit "$original_exit_code"

.github/workflows/tools.yml

@@ -0,0 +1,226 @@
+name: Build host tools
+
+on:
+  pull_request:
+    paths:
+      - 'tools/**'
+      - '.github/workflows/tools.yml'
+  push:
+    paths:
+      - 'tools/**'
+      - '.github/workflows/tools.yml'
+
+permissions:
+  contents: read
+
+jobs:
+  build-macos-latest:
+    if: github.event_name != 'push'
+    runs-on: macos-latest
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          path: openwrt
+
+      - name: Setup MacOS
+        run: |
+          echo "WORKPATH=/Volumes/OpenWrt" >> "$GITHUB_ENV"
+          hdiutil create -size 20g -type SPARSE -fs "Case-sensitive HFS+" -volname OpenWrt OpenWrt.sparseimage
+          hdiutil attach OpenWrt.sparseimage
+          mv "$GITHUB_WORKSPACE/openwrt" /Volumes/OpenWrt/
+
+      - name: Install required prereq on MacOS
+        working-directory: ${{ env.WORKPATH }}/openwrt
+        run: |
+          brew install \
+            autoconf \
+            automake \
+            coreutils \
+            diffutils \
+            findutils \
+            gawk \
+            gettext \
+            git-extras \
+            gmp \
+            gnu-getopt \
+            gnu-sed \
+            gnu-tar \
+            grep \
+            libidn2 \
+            libunistring \
+            m4 \
+            make \
+            mpfr \
+            ncurses \
+            openssl@1.1 \
+            pcre \
+            pkg-config \
+            quilt \
+            readline \
+            wget \
+            zstd
+
+            echo "/bin" >> "$GITHUB_PATH"
+            echo "/sbin/Library/Apple/usr/bin" >> "$GITHUB_PATH"
+            echo "/usr/bin" >> "$GITHUB_PATH"
+            echo "/usr/local/bin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/coreutils/bin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/findutils/libexec/gnubin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/gettext/bin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/gnu-getopt/bin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/make/libexec/gnubin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/make/libexec/gnubin" >> "$GITHUB_PATH"
+            echo "/usr/sbin" >> "$GITHUB_PATH"
+
+      - name: Make prereq
+        working-directory: ${{ env.WORKPATH }}/openwrt
+        run: make defconfig
+
+      - name: Build tools MacOS
+        working-directory: ${{ env.WORKPATH }}/openwrt
+        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Upload logs
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: macos-latest-logs
+          path: ${{ env.WORKPATH }}/openwrt/logs
+
+      - name: Upload config
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: macos-latest-config
+          path: ${{ env.WORKPATH }}/openwrt/.config
+
+  build-linux-buildbot:
+    runs-on: ubuntu-latest
+    container: registry.gitlab.com/openwrt/buildbot/buildworker-3.4.1
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          path: 'openwrt'
+
+      - name: Fix permission
+        run: |
+          chown -R buildbot:buildbot openwrt
+
+      - name: Set configs for tools container
+        if: github.event_name == 'push'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          touch .config
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+      - name: Make prereq
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make defconfig
+
+      - name: Build tools BuildBot Container
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Upload logs
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: linux-buildbot-logs
+          path: openwrt/logs
+
+      - name: Upload config
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: linux-buildbot-config
+          path: openwrt/.config
+
+      - name: Archive prebuilt tools
+        if: github.event_name == 'push'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: tar --mtime=now -cf tools.tar staging_dir/host build_dir/host dl
+
+      - name: Upload prebuilt tools
+        if: github.event_name == 'push'
+        uses: actions/upload-artifact@v3
+        with:
+          name: linux-buildbot-prebuilt-tools
+          path: openwrt/tools.tar
+          retention-days: 1
+
+  push-tools-container:
+    needs: build-linux-buildbot
+    runs-on: ubuntu-latest
+    if: github.event_name == 'push'
+
+    permissions:
+      contents: read
+      packages: write
+
+    steps:
+      - name: Set lower case owner name
+        env:
+          OWNER: ${{ github.repository_owner }}
+        run: |
+          echo "OWNER_LC=${OWNER,,}" >> "$GITHUB_ENV"
+
+      # Per branch tools container tag
+      # By default stick to latest
+      # For official test targetting openwrt stable branch
+      # Get the branch or parse the tag and push dedicated tools containers
+      # Any branch that will match this pattern openwrt-[0-9][0-9].[0-9][0-9]
+      # will refresh the tools container with the matching tag.
+      # (example branch openwrt-22.03 -> tools:openwrt-22.03)
+      # (example branch openwrt-22.03-test -> tools:openwrt-22.03)
+      - name: Determine tools container tag
+        run: |
+          CONTAINER_TAG=latest
+
+          if [ ${{ github.ref_type }} == "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E 'openwrt-[0-9][0-9]\.[0-9][0-9]'; then
+              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\).*/\1/')"
+            fi
+          elif [ ${{ github.ref_type }} == "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E 'v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+
+          echo "Tools container to push tools:$CONTAINER_TAG"
+          echo "CONTAINER_TAG=$CONTAINER_TAG" >> "$GITHUB_ENV"
+
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          path: 'openwrt'
+
+      - name: Download prebuilt tools from build job
+        uses: actions/download-artifact@v3
+        with:
+          name: linux-buildbot-prebuilt-tools
+          path: openwrt
+
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@v2
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build and push
+        uses: docker/build-push-action@v3
+        with:
+          context: openwrt
+          push: true
+          tags: ghcr.io/${{ env.OWNER_LC }}/tools:${{ env.CONTAINER_TAG }}
+          file: openwrt/.github/workflows/Dockerfile.tools

Makefile

@@ -14,7 +14,7 @@ $(if $(findstring $(space),$(TOPDIR)),$(error ERROR: The path to the OpenWrt dir
 
 world:
 
-DISTRO_PKG_CONFIG:=$(shell which -a pkg-config | grep -E '\/usr' | head -n 1)
+DISTRO_PKG_CONFIG:=$(shell which -a pkg-config | grep '/usr' | head -n 1)
 export PATH:=$(TOPDIR)/staging_dir/host/bin:$(PATH)
 
 ifneq ($(OPENWRT_BUILD),1)

config/Config-build.in

@@ -58,6 +58,10 @@ menu "Global build settings"
 		bool "Enable signature checking in opkg"
 		default SIGNED_PACKAGES
 
+	config DOWNLOAD_CHECK_CERTIFICATE
+		bool "Enable TLS certificate verification during package download"
+		default y
+
 	comment "General build options"
 
 	config TESTING_KERNEL
@@ -160,7 +164,6 @@ menu "Global build settings"
 
 	choice
 		prompt "Binary stripping method"
-		default USE_STRIP   if EXTERNAL_TOOLCHAIN
 		default USE_STRIP   if USE_GLIBC
 		default USE_SSTRIP
 		help

config/Config-devel.in

@@ -74,6 +74,11 @@ menuconfig DEVEL
 		  Store ccache in this directory.
 		  If not set, uses './.ccache'
 
+	config KERNEL_CFLAGS
+		string "Kernel extra CFLAGS" if DEVEL
+		default "-falign-functions=32" if TARGET_bcm53xx
+		default ""
+
 	config EXTERNAL_KERNEL_TREE
 		string "Use external kernel tree" if DEVEL
 		default ""

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://git.openwrt.org/feed/packages.git^ded142471e36831d2af63c7fe5062c4367f8ccd2
-src-git luci https://git.openwrt.org/project/luci.git^d24760e60a83b63f316c7b186e30636b5baa5481
-src-git routing https://git.openwrt.org/feed/routing.git^9e7698f20d1edf8f912fbce2f21400f3cc772b31
-src-git telephony https://git.openwrt.org/feed/telephony.git^ed2719867150a9bfc85bf41dff52ef8443820f2a
+src-git-full packages https://git.openwrt.org/feed/packages.git^0b7b12d7075637d3ce3c4eb22b74b2f6d3054672
+src-git-full luci https://git.openwrt.org/project/luci.git^e98243ef9eb838cca80cdd6d1bd0cf69a509d103
+src-git-full routing https://git.openwrt.org/feed/routing.git^8071852b4556a02533cacb7a0f6a432df3507302
+src-git-full telephony https://git.openwrt.org/feed/telephony.git^920fbc5c0a2e4badf51bceff42e9a1e3eb693462

include/depends.mk

@@ -12,6 +12,7 @@
 DEP_FINDPARAMS := -x "*/.svn*" -x ".*" -x "*:*" -x "*\!*" -x "* *" -x "*\\\#*" -x "*/.*_check" -x "*/.*.swp" -x "*/.pkgdir*"
 
 find_md5=find $(wildcard $(1)) -type f $(patsubst -x,-and -not -path,$(DEP_FINDPARAMS) $(2)) -printf "%p%T@\n" | sort | mkhash md5
+find_md5_reproducible=find $(wildcard $(1)) -type f $(patsubst -x,-and -not -path,$(DEP_FINDPARAMS) $(2)) -print0 | xargs -0 mkhash md5 | sort | mkhash md5
 
 define rdep
   .PRECIOUS: $(2)

include/host-build.mk

@@ -21,7 +21,7 @@ include $(INCLUDE_DIR)/depends.mk
 include $(INCLUDE_DIR)/quilt.mk
 
 BUILD_TYPES += host
-HOST_STAMP_PREPARED=$(HOST_BUILD_DIR)/.prepared$(if $(HOST_QUILT)$(DUMP),,$(shell $(call find_md5,${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(HOST_PREPARED_DEPENDS)))
+HOST_STAMP_PREPARED=$(HOST_BUILD_DIR)/.prepared$(if $(HOST_QUILT)$(DUMP),,$(shell $(call $(if $(CONFIG_AUTOREMOVE),find_md5_reproducible,find_md5),${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(HOST_PREPARED_DEPENDS)))
 HOST_STAMP_CONFIGURED:=$(HOST_BUILD_DIR)/.configured
 HOST_STAMP_BUILT:=$(HOST_BUILD_DIR)/.built
 HOST_BUILD_PREFIX?=$(if $(IS_PACKAGE_BUILD),$(STAGING_DIR_HOSTPKG),$(STAGING_DIR_HOST))
@@ -197,8 +197,8 @@ ifndef DUMP
 
     ifneq ($(CONFIG_AUTOREMOVE),)
       host-compile:
-		$(FIND) $(HOST_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' | \
-			$(XARGS) rm -rf
+		$(FIND) $(HOST_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' -print0 | \
+			$(XARGS) -0 rm -rf
     endif
   endef
 endif

include/kernel-5.4

@@ -0,0 +1,2 @@
+LINUX_VERSION-5.4 = .238
+LINUX_KERNEL_HASH-5.4.238 = 70a2b2da85598eba6a73cdc0749e441cbdf3011d9babcb7028a46aa8d98aa91f

include/kernel-build.mk

@@ -10,7 +10,7 @@ ifneq ($(DUMP),1)
 endif
 
 KERNEL_FILE_DEPENDS=$(GENERIC_BACKPORT_DIR) $(GENERIC_PATCH_DIR) $(GENERIC_HACK_DIR) $(PATCH_DIR) $(GENERIC_FILES_DIR) $(FILES_DIR)
-STAMP_PREPARED=$(LINUX_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call find_md5,$(KERNEL_FILE_DEPENDS),)))
+STAMP_PREPARED=$(LINUX_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call $(if $(CONFIG_AUTOREMOVE),find_md5_reproducible,find_md5),$(KERNEL_FILE_DEPENDS),)))
 STAMP_CONFIGURED:=$(LINUX_DIR)/.configured
 include $(INCLUDE_DIR)/download.mk
 include $(INCLUDE_DIR)/quilt.mk

include/kernel-version.mk

@@ -6,9 +6,12 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-5.4 = .154
+KERNEL_DETAILS_FILE=$(INCLUDE_DIR)/kernel-$(KERNEL_PATCHVER)
+ifeq ($(wildcard $(KERNEL_DETAILS_FILE)),)
+  $(error Missing kernel version/hash file for $(KERNEL_PATCHVER). Please create $(KERNEL_DETAILS_FILE))
+endif
 
-LINUX_KERNEL_HASH-5.4.154 = 058994f4666b6b0474a4d5228583e394594e406783b7e93d487c2a66c35f3c06
+include $(KERNEL_DETAILS_FILE)
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

include/kernel.mk

@@ -101,7 +101,7 @@ endif
 KERNEL_MAKE = $(MAKE) $(KERNEL_MAKEOPTS)
 
 KERNEL_MAKE_FLAGS = \
-	KCFLAGS="$(call iremap,$(BUILD_DIR),$(notdir $(BUILD_DIR)))" \
+	KCFLAGS="$(call iremap,$(BUILD_DIR),$(notdir $(BUILD_DIR))) $(filter-out -fno-plt,$(call qstrip,$(CONFIG_EXTRA_OPTIMIZATION))) $(call qstrip,$(CONFIG_KERNEL_CFLAGS))" \
 	HOSTCFLAGS="$(HOST_CFLAGS) -Wall -Wmissing-prototypes -Wstrict-prototypes" \
 	CROSS_COMPILE="$(KERNEL_CROSS)" \
 	ARCH="$(LINUX_KARCH)" \

include/netfilter.mk

@@ -64,9 +64,7 @@ $(eval $(if $(NF_KMOD),,$(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_MARK, $(P_XT)
 
 # kernel only
 $(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_CONNTRACK, $(P_XT)nf_conntrack),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_CONNTRACK_RTCACHE, $(P_XT)nf_conntrack_rtcache),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_DEFRAG_IPV4, $(P_V4)nf_defrag_ipv4),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_CONNTRACK_IPV4, $(P_V4)nf_conntrack_ipv4),))
 
 $(eval $(call nf_add,IPT_CONNTRACK,CONFIG_NETFILTER_XT_MATCH_STATE, $(P_XT)xt_state))
 $(eval $(call nf_add,IPT_CONNTRACK,CONFIG_NETFILTER_XT_TARGET_CT, $(P_XT)xt_CT))
@@ -119,7 +117,6 @@ $(eval $(call nf_add,IPT_IPOPT,CONFIG_NETFILTER_XT_MATCH_STATISTIC, $(P_XT)xt_st
 $(eval $(call nf_add,IPT_IPOPT,CONFIG_NETFILTER_XT_MATCH_TCPMSS, $(P_XT)xt_tcpmss))
 
 $(eval $(call nf_add,IPT_IPOPT,CONFIG_NETFILTER_XT_TARGET_CLASSIFY, $(P_XT)xt_CLASSIFY))
-$(eval $(call nf_add,IPT_IPOPT,CONFIG_IP_NF_MATCH_DSCP, $(P_V4)ipt_dscp))
 $(eval $(call nf_add,IPT_IPOPT,CONFIG_IP_NF_TARGET_ECN, $(P_V4)ipt_ECN))
 
 $(eval $(call nf_add,IPT_IPOPT,CONFIG_NETFILTER_XT_MATCH_ECN, $(P_XT)xt_ecn))
@@ -155,17 +152,14 @@ $(eval $(if $(NF_KMOD),$(call nf_add,NF_REJECT6,CONFIG_NF_REJECT_IPV6, $(P_V6)nf
 $(eval $(if $(NF_KMOD),$(call nf_add,NF_IPT6,CONFIG_IP6_NF_IPTABLES, $(P_V6)ip6_tables),))
 
 $(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_DEFRAG_IPV6, $(P_V6)nf_defrag_ipv6),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK6,CONFIG_NF_CONNTRACK_IPV6, $(P_V6)nf_conntrack_ipv6),))
 
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_FILTER, $(P_V6)ip6table_filter),))
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_MANGLE, $(P_V6)ip6table_mangle),))
-$(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_QUEUE, $(P_V6)ip6_queue),))
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_NF_LOG_IPV6, $(P_V6)nf_log_ipv6),))
 
 $(eval $(if $(NF_KMOD),,$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_IPTABLES, ip6t_icmp6)))
 
 
-$(eval $(call nf_add,IPT_IPV6,CONFIG_IP6_NF_TARGET_LOG, $(P_V6)ip6t_LOG))
 $(eval $(call nf_add,IPT_IPV6,CONFIG_IP6_NF_TARGET_REJECT, $(P_V6)ip6t_REJECT))
 
 # ipv6 extra
@@ -225,11 +219,6 @@ $(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_CONNTRACK_IRC, $(P_XT)nf_connt
 $(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_NAT_IRC, $(P_XT)nf_nat_irc))
 
 
-# ulog
-
-$(eval $(call nf_add,IPT_ULOG,CONFIG_IP_NF_TARGET_ULOG, $(P_V4)ipt_ULOG))
-
-
 # nflog
 
 $(eval $(call nf_add,IPT_NFLOG,CONFIG_NETFILTER_XT_TARGET_NFLOG, $(P_XT)xt_NFLOG))
@@ -315,7 +304,6 @@ $(eval $(call nf_add,EBTABLES_IP4,CONFIG_BRIDGE_EBT_SNAT, $(P_EBT)ebt_snat))
 
 # watchers
 $(eval $(call nf_add,EBTABLES_WATCHERS,CONFIG_BRIDGE_EBT_LOG, $(P_EBT)ebt_log))
-$(eval $(call nf_add,EBTABLES_WATCHERS,CONFIG_BRIDGE_EBT_ULOG, $(P_EBT)ebt_ulog))
 $(eval $(call nf_add,EBTABLES_WATCHERS,CONFIG_BRIDGE_EBT_NFLOG, $(P_EBT)ebt_nflog))
 $(eval $(call nf_add,EBTABLES_WATCHERS,CONFIG_BRIDGE_EBT_NFQUEUE, $(P_EBT)ebt_nfqueue))
 
@@ -378,7 +366,6 @@ IPT_BUILTIN += $(IPT_NAT6-y)
 IPT_BUILTIN += $(IPT_NAT_EXTRA-y)
 IPT_BUILTIN += $(NF_NATHELPER-y)
 IPT_BUILTIN += $(NF_NATHELPER_EXTRA-y)
-IPT_BUILTIN += $(IPT_ULOG-y)
 IPT_BUILTIN += $(IPT_TPROXY-y)
 IPT_BUILTIN += $(NFNETLINK-y)
 IPT_BUILTIN += $(NFNETLINK_LOG-y)

include/package.mk

@@ -84,7 +84,7 @@ ifneq ($(PREV_STAMP_PREPARED),)
   STAMP_PREPARED:=$(PREV_STAMP_PREPARED)
   CONFIG_AUTOREBUILD:=
 else
-  STAMP_PREPARED=$(PKG_BUILD_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call find_md5,${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(PKG_PREPARED_DEPENDS)))
+  STAMP_PREPARED=$(PKG_BUILD_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call $(if $(CONFIG_AUTOREMOVE),find_md5_reproducible,find_md5),${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(PKG_PREPARED_DEPENDS)))
 endif
 STAMP_CONFIGURED=$(PKG_BUILD_DIR)/.configured$(if $(DUMP),,_$(call confvar,$(PKG_CONFIG_DEPENDS)))
 STAMP_CONFIGURED_WILDCARD=$(PKG_BUILD_DIR)/.configured_*
@@ -258,8 +258,8 @@ define Build/CoreTargets
   ifneq ($(CONFIG_AUTOREMOVE),)
     compile:
 		-touch -r $(PKG_BUILD_DIR)/.built $(PKG_BUILD_DIR)/.autoremove 2>/dev/null >/dev/null
-		$(FIND) $(PKG_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' -and -not -name '.pkgdir' | \
-			$(XARGS) rm -rf
+		$(FIND) $(PKG_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' -and -not -name '.pkgdir'  -print0 | \
+			$(XARGS) -0 rm -rf
   endif
 endef
 

include/prereq-build.mk

@@ -153,22 +153,24 @@ $(eval $(call SetupHostCommand,perl,Please install Perl 5.x, \
 $(eval $(call CleanupPython2))
 
 $(eval $(call SetupHostCommand,python,Please install Python >= 3.5, \
+	python3.11 -V 2>&1 | grep 'Python 3', \
 	python3.10 -V 2>&1 | grep 'Python 3', \
 	python3.9 -V 2>&1 | grep 'Python 3', \
 	python3.8 -V 2>&1 | grep 'Python 3', \
 	python3.7 -V 2>&1 | grep 'Python 3', \
 	python3.6 -V 2>&1 | grep 'Python 3', \
 	python3.5 -V 2>&1 | grep 'Python 3', \
-	python3 -V 2>&1 | grep -E 'Python 3\.([5-9]|10)\.?'))
+	python3 -V 2>&1 | grep -E 'Python 3\.([5-9]|[0-9][0-9])\.?'))
 
 $(eval $(call SetupHostCommand,python3,Please install Python >= 3.5, \
+	python3.11 -V 2>&1 | grep 'Python 3', \
 	python3.10 -V 2>&1 | grep 'Python 3', \
 	python3.9 -V 2>&1 | grep 'Python 3', \
 	python3.8 -V 2>&1 | grep 'Python 3', \
 	python3.7 -V 2>&1 | grep 'Python 3', \
 	python3.6 -V 2>&1 | grep 'Python 3', \
 	python3.5 -V 2>&1 | grep 'Python 3', \
-	python3 -V 2>&1 | grep -E 'Python 3\.([5-9]|10)\.?'))
+	python3 -V 2>&1 | grep -E 'Python 3\.([5-9]|[0-9][0-9])\.?'))
 
 $(eval $(call TestHostCommand,python3-distutils, \
 	Please install the Python3 distutils module, \
@@ -192,9 +194,11 @@ $(STAGING_DIR_HOST)/bin/mkhash: $(SCRIPT_DIR)/mkhash.c
 	mkdir -p $(dir $@)
 	$(CC) -O2 -I$(TOPDIR)/tools/include -o $@ $<
 
-prereq: $(STAGING_DIR_HOST)/bin/mkhash
+$(STAGING_DIR_HOST)/bin/xxd: $(SCRIPT_DIR)/xxdi.pl
+	$(LN) $< $@
+
+prereq: $(STAGING_DIR_HOST)/bin/mkhash $(STAGING_DIR_HOST)/bin/xxd
 
 # Install ldconfig stub
 $(eval $(call TestHostCommand,ldconfig-stub,Failed to install stub, \
-	touch $(STAGING_DIR_HOST)/bin/ldconfig && \
-	chmod +x $(STAGING_DIR_HOST)/bin/ldconfig))
+	$(LN) /bin/true $(STAGING_DIR_HOST)/bin/ldconfig))

include/u-boot.mk

@@ -44,6 +44,7 @@ TARGET_DEP = TARGET_$(BUILD_TARGET)$(if $(BUILD_SUBTARGET),_$(BUILD_SUBTARGET))
 UBOOT_MAKE_FLAGS = \
 	HOSTCC="$(HOSTCC)" \
 	HOSTCFLAGS="$(HOST_CFLAGS) $(HOST_CPPFLAGS) -std=gnu11" \
+	LOCALVERSION="-OpenWrt-$(REVISION)" \
 	HOSTLDFLAGS="$(HOST_LDFLAGS)"
 
 define Build/U-Boot/Target

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.1)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.6)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16325-88151b8303)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16842-bc99ce5b22)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.1)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.6)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/Makefile

@@ -66,8 +66,10 @@ $(curdir)/install: $(TMP_DIR)/.build $(curdir)/merge $(if $(CONFIG_TARGET_PER_DE
 	- find $(STAGING_DIR_ROOT) -type d | $(XARGS) chmod 0755
 	rm -rf $(TARGET_DIR) $(TARGET_DIR_ORIG)
 	mkdir -p $(TARGET_DIR)/tmp
-	$(call opkg,$(TARGET_DIR)) install \
-		$(call opkg_package_files,$(foreach pkg,$(shell cat $(PACKAGE_INSTALL_FILES) 2>/dev/null),$(pkg)$(call GetABISuffix,$(pkg))))
+	$(file >$(TMP_DIR)/opkg_install_list,\
+	  $(call opkg_package_files,\
+	    $(foreach pkg,$(shell cat $(PACKAGE_INSTALL_FILES) 2>/dev/null),$(pkg)$(call GetABISuffix,$(pkg)))))
+	$(call opkg,$(TARGET_DIR)) install $$(cat $(TMP_DIR)/opkg_install_list)
 	@for file in $(PACKAGE_INSTALL_FILES); do \
 		[ -s $$file.flags ] || continue; \
 		for flag in `cat $$file.flags`; do \

package/base-files/files/bin/config_generate

@@ -96,7 +96,7 @@ generate_network() {
 
 	json_select network
 		json_select "$1"
-			json_get_vars device macaddr protocol ipaddr netmask vlan
+			json_get_vars device macaddr metric protocol ipaddr netmask vlan
 			json_get_values ports ports
 		json_select ..
 	json_select ..
@@ -154,6 +154,7 @@ generate_network() {
 		set network.$1='interface'
 		set network.$1.type='$type'
 		set network.$1.device='$device'
+		set network.$1.metric='$metric'
 		set network.$1.proto='none'
 	EOF
 

package/base-files/files/etc/init.d/boot

@@ -21,9 +21,10 @@ boot() {
 	[ -f /proc/mounts ] || /sbin/mount_root
 	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
 
-	mkdir -p /var/run
-	mkdir -p /var/log
 	mkdir -p /var/lock
+	chmod 1777 /var/lock
+	mkdir -p /var/log
+	mkdir -p /var/run
 	mkdir -p /var/state
 	mkdir -p /var/tmp
 	mkdir -p /tmp/.uci
@@ -47,6 +48,7 @@ boot() {
 
 	/bin/config_generate
 	uci_apply_defaults
+	sync
 	
 	# temporary hack until configd exists
 	/sbin/reload_config

package/base-files/files/etc/rc.common

@@ -100,9 +100,9 @@ service_data() {
 }
 
 service_running() {
-	local service="${1:-$(basename $initscript)}"
-	local instance="${2:-*}"
-	procd_running "$service" "$instance" "$@"
+	local instance="${1:-*}"
+
+	procd_running "$(basename $initscript)" "$instance"
 }
 
 ${INIT_TRACE:+set -x}

package/base-files/files/lib/functions/uci-defaults.sh

@@ -418,6 +418,15 @@ ucidef_set_led_default() {
 	json_select ..
 }
 
+ucidef_set_led_heartbeat() {
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string trigger heartbeat
+	json_select ..
+
+	json_select ..
+}
+
 ucidef_set_led_gpio() {
 	local gpio="$4"
 	local inverted="$5"

package/base-files/files/lib/upgrade/common.sh

@@ -267,7 +267,7 @@ get_partitions() { # <device> <filename>
 				local type="$1"
 				local lba="$(( $(hex_le32_to_cpu $4) * 0x100000000 + $(hex_le32_to_cpu $3) ))"
 				local end="$(( $(hex_le32_to_cpu $6) * 0x100000000 + $(hex_le32_to_cpu $5) ))"
-				local num="$(( $end - $lba ))"
+				local num="$(( $end - $lba + 1 ))"
 
 				[ "$type" = "00000000000000000000000000000000" ] && continue
 

package/base-files/image-config.in

@@ -183,7 +183,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/releases/21.02.1"
+		default "https://downloads.openwrt.org/releases/21.02.6"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/arm-trusted-firmware-bcm63xx/Makefile

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+
+include $(TOPDIR)/rules.mk
+
+PKG_VERSION:=2.2
+PKG_RELEASE:=$(AUTORELEASE)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=$(PROJECT_GIT)/project/bcm63xx/atf.git
+PKG_SOURCE_DATE:=2021-12-24
+PKG_SOURCE_VERSION:=e6d46baf3fae79f693f90bf34f7284c3dfc64aef
+PKG_MIRROR_HASH:=9d5d04f572b1b6ddc6eb3064b9cb09f5fe982e82d350790041d35316349af124
+
+PKG_MAINTAINER:=Rafał Miłecki <rafal@milecki.pl>
+
+include $(INCLUDE_DIR)/trusted-firmware-a.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Trusted-Firmware-A/Default
+  PLAT:=bcm
+  DEFAULT:=y
+endef
+
+define Trusted-Firmware-A/bcm4908
+  BUILD_TARGET:=bcm4908
+  NAME:=BCM4908
+  BRCM_CHIP=4908
+  TFA_IMAGE:=bl31.bin
+endef
+
+TFA_TARGETS:= \
+	bcm4908
+
+TFA_MAKE_FLAGS += \
+	BRCM_CHIP=$(BRCM_CHIP)
+
+define Package/trusted-firmware-a/install
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/$(PLAT)/release/$(TFA_IMAGE) $(STAGING_DIR_IMAGE)/
+endef
+
+$(eval $(call BuildPackage/Trusted-Firmware-A))

package/boot/uboot-bcm4908/Makefile

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_RELEASE:=$(AUTORELEASE)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://git.openwrt.org/project/bcm63xx/u-boot.git
+PKG_SOURCE_DATE:=2022-03-15
+PKG_SOURCE_VERSION:=0625aad74d1f5b6f9c068955ad3fd7f6df635e50
+PKG_MIRROR_HASH:=0602e0e4f101ead206940eccca832b75191905c1e81290340a89b07dbee7a6ce
+
+include $(INCLUDE_DIR)/u-boot.mk
+include $(INCLUDE_DIR)/package.mk
+
+define U-Boot/Default
+  BUILD_TARGET:=bcm4908
+  UBOOT_IMAGE:=u-boot-nodtb.bin
+  DEFAULT:=y
+endef
+
+define U-Boot/bcm4908
+  NAME:=Broadcom's BCM4908
+  UBOOT_CONFIG:=bcm94908
+  SOC:=bcm4908
+endef
+
+define U-Boot/bcm4912
+  NAME:=Broadcom's BCM4912
+  UBOOT_CONFIG:=bcm94912
+  SOC:=bcm4912
+endef
+
+UBOOT_TARGETS := \
+	bcm4908 \
+	bcm4912
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+	mkdir -p $(PKG_BUILD_DIR)/include/generated/
+	( cd $(PKG_BUILD_DIR)/board/broadcom/bcmbca/httpd/html/ && \
+	  $(STAGING_DIR_HOST)/bin/xxd -i index.html > ../../../../../include/generated/index.h && \
+	  $(STAGING_DIR_HOST)/bin/xxd -i flashing.html > ../../../../../include/generated/flashing.h && \
+	  $(STAGING_DIR_HOST)/bin/xxd -i fail.html > ../../../../../include/generated/fail.h && \
+	  $(STAGING_DIR_HOST)/bin/xxd -i 404.html > ../../../../../include/generated/404.h )
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)/u-boot
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/u-boot/u-boot-$(SOC).bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/u-boot.dtb $(STAGING_DIR_IMAGE)/u-boot/u-boot-$(SOC).dtb
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/arch/arm/dts/*.dtb $(STAGING_DIR_IMAGE)/u-boot/
+endef
+
+$(eval $(call BuildPackage/U-Boot))

package/boot/uboot-bcm4908/patches/100-check-config-allow-to-complete-build-even-with-ad-ho.patch

@@ -0,0 +1,40 @@
+From: Masahiro Yamada <yamada.masahiro@socionext.com>
+Date: Mon, 26 Sep 2016 13:05:02 +0900
+Subject: [PATCH] check-config: allow to complete build even with ad-hoc CONFIG
+ options
+
+Currently, the check-config.sh terminates the build when unknown
+ad-hoc options are detected.  I think it is too much because we may
+want to patch config headers locally in a build/deployment project.
+
+So, let's relax check-config.sh to just warn even if it detects
+options that are not in the whitelist.  Instead, this check can be
+done at the end of build, along with other checks.  It will catch
+more attention.
+
+Even with this change, the Buildman tool catches new warnings,
+so Tom can give NACK to new ad-hoc options.
+
+Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
+---
+ scripts/check-config.sh | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/scripts/check-config.sh
++++ b/scripts/check-config.sh
+@@ -50,14 +50,13 @@ cat `find ${srctree} -name "Kconfig*"` |sed -n \
+ 	|sort |uniq > ${ok}
+ comm -23 ${suspects} ${ok} >${new_adhoc}
+ if [ -s ${new_adhoc} ]; then
+-	echo >&2 "Error: You must add new CONFIG options using Kconfig"
++	echo >&2 "Warning: You must add new CONFIG options using Kconfig"
+ 	echo >&2 "The following new ad-hoc CONFIG options were detected:"
+ 	cat >&2 ${new_adhoc}
+ 	echo >&2
+ 	echo >&2 "Please add these via Kconfig instead. Find a suitable Kconfig"
+ 	echo >&2 "file and add a 'config' or 'menuconfig' option."
+ 	# Don't delete the temporary files in case they are useful
+-	exit 1
+ else
+ 	rm ${suspects} ${ok} ${new_adhoc}
+ fi

package/boot/uboot-bcm4908/patches/101-tools-fix-mkimage-static-compilation.patch

@@ -0,0 +1,24 @@
+From 8efe417aa9de654425cc01d0fc93be355a3f648d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 13 Oct 2021 11:04:45 +0200
+Subject: [PATCH] tools: fix mkimage static compilation
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ tools/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/tools/Makefile
++++ b/tools/Makefile
+@@ -157,7 +157,7 @@ ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CON
+ HOSTCFLAGS_kwbimage.o += \
+ 	$(shell pkg-config --cflags libssl libcrypto 2> /dev/null || echo "")
+ HOSTLOADLIBES_mkimage += \
+-	$(shell pkg-config --libs libssl libcrypto 2> /dev/null || echo "-lssl -lcrypto")
++	$(shell pkg-config --libs --static libssl libcrypto 2> /dev/null || echo "-lssl -lcrypto -lpthread")
+ 
+ # OS X deprecate openssl in favour of CommonCrypto, supress deprecation
+ # warnings on those systems

package/boot/uboot-bcm4908/patches/200-configs-bcm94908-unset-CONFIG_SPL.patch

@@ -0,0 +1,50 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 4 Mar 2022 09:21:32 +0100
+Subject: [PATCH] configs: bcm94908: unset CONFIG_SPL
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Compiling SPL is always tricky as it needs to fit limited resources.
+Fortunately in most cases there is no need to replace SPL or TPL while
+flashing a new firmware.
+
+Compiling SPL for BCM4908 seems to fail with non-Broadcom toolchain:
+aarch64-openwrt-linux-musl-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
+aarch64-openwrt-linux-musl-ld.bfd: section .bss VMA [00000000822b9000,00000000822b93ef] overlaps section .u_boot_list VMA [00000000822b8f60,00000000822b9a87]
+aarch64-openwrt-linux-musl-ld.bfd: region `.sram' overflowed by 2696 bytes
+
+It also requires hashtable.h which has to be generated using some
+Broadcom's custom perl script that isn't integrated as this point.
+
+For now just disable SPL and use only last-stage U-Boot that must be
+shipped with every firmware.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ configs/bcm94908_defconfig | 2 +-
+ configs/bcm94912_defconfig | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/configs/bcm94908_defconfig
++++ b/configs/bcm94908_defconfig
+@@ -21,7 +21,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
+ CONFIG_TPL_LIBCOMMON_SUPPORT=y
+ CONFIG_TPL_LIBGENERIC_SUPPORT=y
+ CONFIG_NR_DRAM_BANKS=1
+-CONFIG_SPL=y
++# CONFIG_SPL is not set
+ CONFIG_SPL_LIBDISK_SUPPORT=y
+ CONFIG_ENV_VARS_UBOOT_CONFIG=y
+ CONFIG_TPL_SYS_MALLOC_F_LEN=0x11000
+--- a/configs/bcm94912_defconfig
++++ b/configs/bcm94912_defconfig
+@@ -22,7 +22,7 @@ CONFIG_TPL_LIBCOMMON_SUPPORT=y
+ CONFIG_TPL_LIBGENERIC_SUPPORT=y
+ CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_NR_DRAM_BANKS=2
+-CONFIG_SPL=y
++# CONFIG_SPL is not set
+ CONFIG_SPL_LIBDISK_SUPPORT=y
+ CONFIG_ENV_VARS_UBOOT_CONFIG=y
+ CONFIG_TPL_SYS_MALLOC_F_LEN=0x10000

package/boot/uboot-bcm4908/patches/201-Assume-TPL-support-for-ATF-when-compiling-U-Boot-wit.patch

@@ -0,0 +1,67 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 4 Mar 2022 09:23:34 +0100
+Subject: [PATCH] Assume TPL support for ATF when compiling U-Boot without TPL
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Broadcom's U-Boot behaviour depends on compilation time check whether
+TPL was compiled with or without ATF support. There is no proper runtime
+check.
+
+When compiling just U-Boot (without SPL & TPL) there is no way to tell
+if it's going to work with TPL with or without ATF support.
+
+Modify code to blindly assume ATF support in TPL in such cases. It seems
+to be always true for Broadcom and we need some assumption as we don't
+deal with compiling SPL or TPL.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ arch/arm/mach-bcmbca/bcm4908/cpu.c | 2 +-
+ arch/arm/mach-bcmbca/bcm4912/cpu.c | 2 +-
+ board/broadcom/bcmbca/board.c      | 4 ++--
+ 3 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/mach-bcmbca/bcm4908/cpu.c
++++ b/arch/arm/mach-bcmbca/bcm4908/cpu.c
+@@ -138,7 +138,7 @@ int get_nr_cpus()
+ 	return nr_cpus;
+ }
+ 
+-#if !defined(CONFIG_TPL_ATF)
++#if defined(CONFIG_TPL) && !defined(CONFIG_TPL_ATF)
+ void boot_secondary_cpu(unsigned long vector)
+ {
+ 	uint32_t cpu, nr_cpus = QUAD_CPUS;
+--- a/arch/arm/mach-bcmbca/bcm4912/cpu.c
++++ b/arch/arm/mach-bcmbca/bcm4912/cpu.c
+@@ -174,7 +174,7 @@ int bcmbca_get_boot_device(void)
+ 	return BOOT_DEVICE_NONE;
+ }
+ 
+-#if !defined(CONFIG_TPL_ATF)
++#if defined(CONFIG_TPL) && !defined(CONFIG_TPL_ATF)
+ void boot_secondary_cpu(unsigned long vector)
+ {
+ 	uint32_t cpu, nr_cpus = 4;
+--- a/board/broadcom/bcmbca/board.c
++++ b/board/broadcom/bcmbca/board.c
+@@ -103,7 +103,7 @@ void board_spinor_init(void)
+ 
+ int board_init(void)
+ {
+-#if !defined(CONFIG_TPL_ATF)
++#if defined(CONFIG_TPL) && !defined(CONFIG_TPL_ATF)
+ 	unsigned long vector;
+ #endif
+ 	board_sdk_init_e();
+@@ -121,7 +121,7 @@ int board_init(void)
+ 	printf("$Uboot: "BUILD_TAG" $\n");
+ #endif
+ 
+-#if !defined(CONFIG_TPL_ATF)
++#if defined(CONFIG_TPL) && !defined(CONFIG_TPL_ATF)
+ #if defined(CONFIG_ARM64)
+ 	vector  = (unsigned long)&_start;
+ #else

package/boot/uboot-envtools/files/ath79

@@ -61,6 +61,8 @@ samsung,wam250|\
 ubnt,nanostation-m|\
 yuncore,a770|\
 yuncore,a782|\
+yuncore,a930|\
+yuncore,xd3200|\
 yuncore,xd4200|\
 zyxel,nbg6616)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"

package/boot/uboot-envtools/files/mvebu

@@ -18,7 +18,10 @@ buffalo,ls421de)
 	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000"
 	;;
 cznic,turris-omnia)
-	if grep -q 'U-Boot 2015.10-rc2' /dev/mtd0; then
+	idx="$(find_mtd_index u-boot-env)"
+	if [ -n "$idx" ]; then
+		ubootenv_add_uci_config "/dev/mtd${idx}" "0x0" "0x10000" "0x10000"
+	elif grep -q 'U-Boot 2015.10-rc2' /dev/mtd0; then
 		ubootenv_add_uci_config "/dev/mtd0" "0xc0000" "0x10000" "0x40000"
 	else
 		ubootenv_add_uci_config "/dev/mtd0" "0xf0000" "0x10000" "0x10000"

package/boot/uboot-envtools/files/ramips

@@ -18,12 +18,14 @@ alfa-network,awusfree1|\
 alfa-network,quad-e4g|\
 alfa-network,r36m-e4g|\
 alfa-network,tube-e4g|\
-engenius,esr600h)
+engenius,esr600h|\
+sitecom,wlr-4100-v1-002)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x1000"
 	;;
 allnet,all0256n-4m|\
 allnet,all0256n-8m|\
-allnet,all5002)
+allnet,all5002|\
+yuncore,ax820)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
 ampedwireless,ally-00x19k|\

package/boot/uboot-lantiq/patches/0030-lzma-force-8bit-reads.patch

@@ -0,0 +1,57 @@
+From a40a6e16ed76e5e26a0f60226b64c311d4a62c9f Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Sun, 31 Oct 2021 23:04:54 +0100
+Subject: [PATCH] lzma: force 8bit reads
+
+At least since gcc 7.3.0 (OpenWrt 18.06) lwr/lwl are used in the
+assembly of LzmaProps_Decode. While the decission made by the compiler
+looks perfect fine, it triggers some obscure hang on lantiq danube-s
+v1.5 with MX29LV640EB NOR flash chips.
+
+Only if the offset 1 is used, the hang can be observed. Using any other
+offset works fine:
+
+  lwl s0,0(a1) - s0 == 0x6d000080
+  lwl s0,1(a1) - hangs
+  lwl s0,2(a1) - s0 == 0x0080xxxx
+  lwl s0,3(a1) - s0 == 0x80xxxxxx
+
+It isn't clear whether it is a limitation of the flash chip, the EBU or
+something else.
+
+Force 8bit reads to prevent gcc optimizing the read with lwr/lwl
+instructions.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ lib/lzma/LzmaDec.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/lib/lzma/LzmaDec.c
++++ b/lib/lzma/LzmaDec.c
+@@ -7,6 +7,7 @@
+ #include "LzmaDec.h"
+ 
+ #include <linux/string.h>
++#include <asm/io.h>
+ 
+ #define kNumTopBits 24
+ #define kTopValue ((UInt32)1 << kNumTopBits)
+@@ -703,7 +704,7 @@ static ELzmaDummy LzmaDec_TryDummy(const
+ 
+ static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
+ {
+-  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
++  p->code = ((UInt32)readb(&data[1]) << 24) | ((UInt32)readb(&data[2]) << 16) | ((UInt32)readb(&data[3]) << 8) | ((UInt32)readb(&data[4]));
+   p->range = 0xFFFFFFFF;
+   p->needFlush = 0;
+ }
+@@ -929,7 +930,7 @@ SRes LzmaProps_Decode(CLzmaProps *p, con
+   if (size < LZMA_PROPS_SIZE)
+     return SZ_ERROR_UNSUPPORTED;
+   else
+-    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
++    dicSize = readb(&data[1]) | ((UInt32)readb(&data[2]) << 8) | ((UInt32)readb(&data[3]) << 16) | ((UInt32)readb(&data[4]) << 24);
+ 
+   if (dicSize < LZMA_DIC_MIN)
+     dicSize = LZMA_DIC_MIN;

package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt

@@ -2,7 +2,7 @@ fdtaddr=0x8f000000
 loadaddr=0x81000000
 fdt_high=0x8fffffff
 initrd_high=0xffffffff
-sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+sd_boot=ext4load mmc 0:1 ${loadaddr} fitImage;bootm ${loadaddr}
 bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
 bootcmd=echo starting openwrt ...;run sd_boot
 bootdelay=3

package/boot/uboot-layerscape/patches/0900-layerscape-adjust-LS1021A-IOT-config-for-OpenWrt.patch

@@ -0,0 +1,45 @@
+From b382eeafe01df21da3518b2f1dd7d22ee114efb0 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Mon, 24 Oct 2022 14:19:38 +0200
+Subject: [PATCH] layerscape: adjust LS1021A-IOT config for OpenWrt
+
+Two configs are required:
+  - FIT
+  - Ext4load
+
+Let's enable it. U-boot is now bigger than 512K. Let's enlarge it to
+768K. Envs start at 1M, so it will fit.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ configs/ls1021aiot_sdcard_defconfig | 3 +++
+ include/configs/ls1021aiot.h        | 4 ++--
+ 2 files changed, 5 insertions(+), 2 deletions(-)
+
+--- a/configs/ls1021aiot_sdcard_defconfig
++++ b/configs/ls1021aiot_sdcard_defconfig
+@@ -27,8 +27,11 @@ CONFIG_CMD_MII=y
+ # CONFIG_CMD_MDIO is not set
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_EXT2=y
++CONFIG_CMD_EXT4=y
+ CONFIG_CMD_FAT=y
+ # CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
+ CONFIG_OF_CONTROL=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_IS_IN_MMC=y
+--- a/include/configs/ls1021aiot.h
++++ b/include/configs/ls1021aiot.h
+@@ -78,8 +78,8 @@
+ 		CONFIG_SYS_MONITOR_LEN)
+ #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+ #define CONFIG_SPL_BSS_START_ADDR	0x80100000
+-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+-#define CONFIG_SYS_MONITOR_LEN		0x80000
++#define CONFIG_SPL_BSS_MAX_SIZE		0xc0000
++#define CONFIG_SYS_MONITOR_LEN		0xc0000
+ #endif
+ 
+ #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL

package/boot/uboot-sunxi/Makefile

@@ -301,6 +301,12 @@ define U-Boot/Bananapi_M2_Ultra
   BUILD_DEVICES:=sinovoip_bananapi-m2-ultra
 endef
 
+define U-Boot/bananapi_m2_berry
+  BUILD_SUBTARGET:=cortexa7
+  NAME:=Bananapi M2 Berry
+  BUILD_DEVICES:=sinovoip_bananapi-m2-berry
+endef
+
 UBOOT_TARGETS := \
 	a64-olinuxino \
 	a64-olinuxino-emmc \
@@ -312,6 +318,7 @@ UBOOT_TARGETS := \
 	A20-OLinuXino_MICRO \
 	bananapi_m2_plus_h3 \
 	Bananapi \
+	bananapi_m2_berry \
 	Bananapi_M2_Ultra \
 	Bananapro \
 	Cubieboard \

package/firmware/amd64-microcode/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2018 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=amd64-microcode
-PKG_VERSION:=20191218
-PKG_RELEASE:=1
-
-PKG_SOURCE:=amd64-microcode_3.$(PKG_VERSION).$(PKG_RELEASE).tar.xz
-PKG_SOURCE_URL:=http://ftp.debian.org/debian/pool/non-free/a/amd64-microcode/
-PKG_HASH:=f469b79348097c5f04641b67a39d0ee5a2a1916c9556281626c04f2275d4132d
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-3.$(PKG_VERSION).$(PKG_RELEASE)
-
-PKG_LICENSE_FILE:=LICENSE.amd-ucode
-
-PKG_FLAGS:=nonshared
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/amd64-microcode
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=$(PKG_SOURCE_URL)
-  DEPENDS:=@TARGET_x86
-  TITLE:=AMD64 CPU microcode
-endef
-
-define Build/Prepare
-	rm -rf $(PKG_BUILD_DIR)
-	mkdir -p $(PKG_BUILD_DIR)
-	$(TAR) -C $(BUILD_DIR) -xJf $(DL_DIR)/$(PKG_SOURCE)
-endef
-
-define Build/Compile
-endef
-
-define Package/amd64-microcode/install
-	$(INSTALL_DIR) $(1)/lib/firmware/amd-ucode
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.bin $(1)/lib/firmware/amd-ucode
-endef
-
-$(eval $(call BuildPackage,amd64-microcode))

package/firmware/cypress-firmware/Makefile

@@ -7,25 +7,24 @@
 
 include $(TOPDIR)/rules.mk
 
-UNPACK_CMD=unzip -q -p $(DL_DIR)/$(PKG_SOURCE) $(PKG_SOURCE_UNZIP) | gzip -dc | $(HOST_TAR) -C $(1) $(TAR_OPTIONS)
-
 PKG_NAME:=cypress-firmware
-PKG_VERSION:=v5.4.18-2020_0402
-PKG_RELEASE:=3
+PKG_VERSION:=5.4.18-2021_0812
+PKG_RELEASE:=1
 
-PKG_SOURCE_UNZIP:=cypress-firmware-$(PKG_VERSION).tar.gz
-PKG_SOURCE:=cypress-fmac-$(PKG_VERSION).zip
-PKG_SOURCE_URL:=https://community.cypress.com/gfawx74859/attachments/gfawx74859/resourcelibrary/1016/1/
-PKG_HASH:=b12b0570f462c2f3c26dde98b10235a845a7109037def1e7e51af728bcc1a958
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/Infineon/ifx-linux-firmware/
+PKG_MIRROR_HASH:=ac882b482dd401b53cdecc6004cd2bd3d65e888c19206dcf10931a28033ada4d
+PKG_SOURCE_VERSION:=release-v$(PKG_VERSION)
 
 PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
+PKG_LICENSE_FILES:=LICENCE
 
 include $(INCLUDE_DIR)/package.mk
 
 define Package/cypress-firmware-default
   SECTION:=firmware
   CATEGORY:=Firmware
-  URL:=https://community.cypress.com/community/linux
+  URL:=https://community.infineon.com/
 endef
 
 define Build/Compile
@@ -41,10 +40,10 @@ endef
 define Package/cypress-firmware-43012-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43012-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43012-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43012-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43012-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43012-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac43012-sdio.clm_blob
 endef
 
@@ -59,7 +58,7 @@ endef
 define Package/cypress-firmware-43340-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43340-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43340-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43340-sdio.bin
 endef
 
@@ -76,7 +75,7 @@ endef
 define Package/cypress-firmware-43362-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43362-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43362-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43362-sdio.bin
 endef
 
@@ -91,7 +90,7 @@ endef
 define Package/cypress-firmware-4339-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4339-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4339-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4339-sdio.bin
 endef
 
@@ -108,10 +107,10 @@ endef
 define Package/cypress-firmware-43430-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43430-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43430-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43430-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43430-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.clm_blob
 endef
 
@@ -128,10 +127,10 @@ endef
 define Package/cypress-firmware-43455-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43455-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43455-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43455-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43455-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.clm_blob
 endef
 
@@ -146,10 +145,10 @@ endef
 define Package/cypress-firmware-4354-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4354-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4354-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4354-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4354-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4354-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac4354-sdio.clm_blob
 endef
 
@@ -164,10 +163,10 @@ endef
 define Package/cypress-firmware-4356-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-pcie.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4356-pcie.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4356-pcie.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-pcie.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4356-pcie.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac4356-pcie.clm_blob
 endef
 
@@ -182,10 +181,10 @@ endef
 define Package/cypress-firmware-4356-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4356-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4356-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4356-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac4356-sdio.clm_blob
 endef
 
@@ -200,51 +199,15 @@ endef
 define Package/cypress-firmware-43570-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43570-pcie.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43570-pcie.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43570-pcie.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43570-pcie.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43570-pcie.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac43570-pcie.clm_blob
 endef
 
 $(eval $(call BuildPackage,cypress-firmware-43570-pcie))
 
-# Cypress 4359 PCIe Firmware
-define Package/cypress-firmware-4359-pcie
-  $(Package/cypress-firmware-default)
-  TITLE:=CYW4359 FullMac PCIe firmware
-endef
-
-define Package/cypress-firmware-4359-pcie/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-pcie.bin \
-		$(1)/lib/firmware/brcm/brcmfmac4359-pcie.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-pcie.clm_blob \
-		$(1)/lib/firmware/brcm/brcmfmac4359-pcie.clm_blob
-endef
-
-$(eval $(call BuildPackage,cypress-firmware-4359-pcie))
-
-# Cypress 4359 SDIO Firmware
-define Package/cypress-firmware-4359-sdio
-  $(Package/cypress-firmware-default)
-  TITLE:=CYW4359 FullMac SDIO firmware
-endef
-
-define Package/cypress-firmware-4359-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac4359-sdio.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-sdio.clm_blob \
-		$(1)/lib/firmware/brcm/brcmfmac4359-sdio.clm_blob
-endef
-
-$(eval $(call BuildPackage,cypress-firmware-4359-sdio))
-
 # Cypress 4373 SDIO Firmware
 define Package/cypress-firmware-4373-sdio
   $(Package/cypress-firmware-default)
@@ -254,10 +217,10 @@ endef
 define Package/cypress-firmware-4373-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4373-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4373-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4373-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4373-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4373-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac4373-sdio.clm_blob
 endef
 
@@ -272,10 +235,10 @@ endef
 define Package/cypress-firmware-4373-usb/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4373-usb.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4373-usb.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4373-usb.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4373.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4373.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac4373.clm_blob
 endef
 
@@ -290,29 +253,11 @@ endef
 define Package/cypress-firmware-54591-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac54591-pcie.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac54591-pcie.bin \
 		$(1)/lib/firmware/brcm/brcmfmac54591-pcie.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac54591-pcie.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac54591-pcie.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac54591-pcie.clm_blob
 endef
 
 $(eval $(call BuildPackage,cypress-firmware-54591-pcie))
-
-# Cypress 89459 PCIe Firmware
-define Package/cypress-firmware-89459-pcie
-  $(Package/cypress-firmware-default)
-  TITLE:=CYW89459 FullMac PCIe firmware
-endef
-
-define Package/cypress-firmware-89459-pcie/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac89459-pcie.bin \
-		$(1)/lib/firmware/brcm/brcmfmac89459-pcie.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac89459-pcie.clm_blob \
-		$(1)/lib/firmware/brcm/brcmfmac89459-pcie.clm_blob
-endef
-
-$(eval $(call BuildPackage,cypress-firmware-89459-pcie))

package/firmware/cypress-nvram/Makefile

@@ -100,6 +100,9 @@ define Package/cypress-nvram-43455-sdio-rpi-4b/install
 	$(INSTALL_DATA) \
 		$(PKG_BUILD_DIR)/brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
 		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
+		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.txt
 endef
 
 $(eval $(call BuildPackage,cypress-nvram-43455-sdio-rpi-4b))

package/firmware/intel-microcode/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=intel-microcode
-PKG_VERSION:=20200616
+PKG_VERSION:=20220809
 PKG_RELEASE:=1
 
-PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).$(PKG_RELEASE).tar.xz
+PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).1.tar.xz
 PKG_SOURCE_URL:=http://ftp.debian.org/debian/pool/non-free/i/intel-microcode/
-PKG_HASH:=bcc3b81c452fe4649a948c022475d76c1cdfbb730f36749a082f412f1406a3b9
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-3.$(PKG_VERSION).$(PKG_RELEASE)
+PKG_HASH:=4cf6c3638bb52d9d45c1916af866fd0929628a6f459daac3edfd369149e9c665
+PKG_BUILD_DIR:=$(BUILD_DIR)/intel-microcode-3.$(PKG_VERSION).1
 
 PKG_BUILD_DEPENDS:=iucode-tool/host
 

package/firmware/linux-firmware/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=linux-firmware
-PKG_VERSION:=20201118
-PKG_RELEASE:=3
+PKG_VERSION:=20211216
+PKG_RELEASE:=1
 
 PKG_SOURCE_URL:=@KERNEL/linux/kernel/firmware
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_HASH:=863d5a31da725b856a917280d1e3014929b3bc3d4e6e5faecf530c13afb7e2b9
+PKG_HASH:=eeddb4e6bef31fd1a3757f12ccc324929bbad97855c0b9ec5ed780f74de1837d
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/firmware/linux-firmware/amd.mk

@@ -0,0 +1,29 @@
+Package/amd64-microcode = $(call Package/firmware-default,AMD64 CPU microcode,@TARGET_x86)
+define Package/amd64-microcode/install
+	$(INSTALL_DIR) $(1)/lib/firmware/amd-ucode
+	$(CP) \
+		$(PKG_BUILD_DIR)/amd-ucode/*.bin \
+		$(1)/lib/firmware/amd-ucode
+endef
+
+$(eval $(call BuildPackage,amd64-microcode))
+
+Package/amdgpu-firmware = $(call Package/firmware-default,AMDGPU Video Driver firmware)
+define Package/amdgpu-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/amdgpu
+	$(CP) \
+		$(PKG_BUILD_DIR)/amdgpu/*.bin \
+		$(1)/lib/firmware/amdgpu
+endef
+
+$(eval $(call BuildPackage,amdgpu-firmware))
+
+Package/radeon-firmware = $(call Package/firmware-default,Radeon Video Driver firmware)
+define Package/radeon-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/radeon
+	$(CP) \
+		$(PKG_BUILD_DIR)/radeon/*.bin \
+		$(1)/lib/firmware/radeon
+endef
+
+$(eval $(call BuildPackage,radeon-firmware))

package/firmware/linux-firmware/amdgpu.mk

@@ -1,9 +0,0 @@
-Package/amdgpu-firmware = $(call Package/firmware-default,AMDGPU Video Driver firmware)
-define Package/amdgpu-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/amdgpu
-	$(CP) \
-		$(PKG_BUILD_DIR)/amdgpu/*.bin \
-		$(1)/lib/firmware/amdgpu
-endef
-
-$(eval $(call BuildPackage,amdgpu-firmware))

package/firmware/linux-firmware/broadcom.mk

@@ -34,24 +34,6 @@ define Package/brcmfmac-firmware-4329-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4329-sdio))
 
-Package/brcmfmac-firmware-43362-sdio = $(call Package/firmware-default,Broadcom BCM43362 FullMac SDIO firmware)
-define Package/brcmfmac-firmware-43362-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/brcm/brcmfmac43362-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac43362-sdio.bin
-endef
-$(eval $(call BuildPackage,brcmfmac-firmware-43362-sdio))
-
-Package/brcmfmac-firmware-43430-sdio = $(call Package/firmware-default,Broadcom BCM43430 FullMac SDIO firmware)
-define Package/brcmfmac-firmware-43430-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/brcm/brcmfmac43430-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.bin
-endef
-$(eval $(call BuildPackage,brcmfmac-firmware-43430-sdio))
-
 Package/brcmfmac-firmware-43430-sdio-rpi-3b = $(call Package/firmware-default,Broadcom BCM43430 NVRAM for Raspberry Pi 3B)
 define Package/brcmfmac-firmware-43430-sdio-rpi-3b/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
@@ -79,15 +61,6 @@ define Package/brcmfmac-firmware-43430a0-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-43430a0-sdio))
 
-Package/brcmfmac-firmware-43455-sdio = $(call Package/firmware-default,Broadcom BCM43455 FullMac SDIO firmware)
-define Package/brcmfmac-firmware-43455-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/brcm/brcmfmac43455-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.bin
-endef
-$(eval $(call BuildPackage,brcmfmac-firmware-43455-sdio))
-
 Package/brcmfmac-firmware-43455-sdio-rpi-3b-plus = $(call Package/firmware-default,Broadcom BCM43455 NVRAM for Raspberry Pi 3B+)
 define Package/brcmfmac-firmware-43455-sdio-rpi-3b-plus/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm

package/firmware/linux-firmware/qca_ath10k.mk

@@ -26,6 +26,23 @@ define Package/ath10k-firmware-qca4019/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca4019))
 
+Package/ath10k-board-qca9377 = $(call Package/firmware-default,ath10k qca9377 board firmware)
+define Package/ath10k-board-qca9377/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9377/hw1.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/ath10k/QCA9377/hw1.0/board-2.bin \
+		$(1)/lib/firmware/ath10k/QCA9377/hw1.0/
+endef
+$(eval $(call BuildPackage,ath10k-board-qca9377))
+Package/ath10k-firmware-qca9377 = $(call Package/firmware-default,ath10k qca9377 firmware,+ath10k-board-qca9377)
+define Package/ath10k-firmware-qca9377/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9377/hw1.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/ath10k/QCA9377/hw1.0/firmware-6.bin \
+		$(1)/lib/firmware/ath10k/QCA9377/hw1.0/firmware-6.bin
+endef
+$(eval $(call BuildPackage,ath10k-firmware-qca9377))
+
 Package/ath10k-board-qca9887 = $(call Package/firmware-default,ath10k qca9887 board firmware)
 define Package/ath10k-board-qca9887/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0

package/firmware/linux-firmware/radeon.mk

@@ -1,9 +0,0 @@
-Package/radeon-firmware = $(call Package/firmware-default,Radeon Video Driver firmware)
-define Package/radeon-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/radeon
-	$(CP) \
-		$(PKG_BUILD_DIR)/radeon/*.bin \
-		$(1)/lib/firmware/radeon
-endef
-
-$(eval $(call BuildPackage,radeon-firmware))

package/firmware/linux-firmware/realtek.mk

@@ -76,16 +76,10 @@ Package/rtl8723bu-firmware = $(call Package/firmware-default,RealTek RTL8723BU f
 define Package/rtl8723bu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8723bu_nic.bin $(1)/lib/firmware/rtlwifi
+	ln -s rtl8723bu_nic.bin $(1)/lib/firmware/rtlwifi/rtl8723bs_nic.bin
 endef
 $(eval $(call BuildPackage,rtl8723bu-firmware))
 
-Package/rtl8723bs-firmware = $(call Package/firmware-default,RealTek RTL8723BS firmware)
-define Package/rtl8723bs-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8723bs*.bin $(1)/lib/firmware/rtlwifi
-endef
-$(eval $(call BuildPackage,rtl8723bs-firmware))
-
 Package/rtl8821ae-firmware = $(call Package/firmware-default,RealTek RTL8821AE firmware)
 define Package/rtl8821ae-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi

package/firmware/wireless-regdb/Makefile

@@ -1,12 +1,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wireless-regdb
-PKG_VERSION:=2021.04.21
+PKG_VERSION:=2022.08.12
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
-PKG_HASH:=9e4c02b2a9710df4dbdb327c39612e8cbbae6495987afeddaebab28c1ea3d8fa
+PKG_HASH:=59c8f7d17966db71b27f90e735ee8f5b42ca3527694a8c5e6e9b56bd379c3b84
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/firmware/wireless-regdb/patches/500-world-regd-5GHz.patch

@@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 ---
 --- a/db.txt
 +++ b/db.txt
-@@ -16,7 +16,7 @@ country 00:
+@@ -19,7 +19,7 @@ country 00:
  	# Channel 14. Only JP enables this and for 802.11b only
  	(2474 - 2494 @ 20), (20), NO-IR, NO-OFDM
  	# Channel 36 - 48

package/kernel/bcm63xx-cfe/Makefile

@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=bcm63xx-cfe
-PKG_RELEASE:=2
+PKG_RELEASE:=1
 
 PKG_SOURCE_URL:=https://github.com/openwrt/bcm63xx-cfe.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-03-05
-PKG_SOURCE_VERSION:=d03501629fc8b1ba8f9b0961d543c256a3d0098f
-PKG_MIRROR_HASH:=b32a6f68d59c8f4534def7ec2568ad7da7a612a605b9406328309c78115ee88d
+PKG_SOURCE_DATE:=2021-06-22
+PKG_SOURCE_VERSION:=e5050f37150b34deb547b50feccd0e7439cb5bd7
+PKG_MIRROR_HASH:=85fed9f4bdf23cf7d33a02f549ffe9073666890f786d5ffa484c0368552b75ae
 
 PKG_FLAGS:=nonshared
 

package/kernel/cryptodev-linux/Makefile

@@ -10,12 +10,12 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=cryptodev-linux
-PKG_VERSION:=1.11
-PKG_RELEASE:=1
+PKG_VERSION:=1.12
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_URL:=https://codeload.github.com/$(PKG_NAME)/$(PKG_NAME)/tar.gz/$(PKG_NAME)-$(PKG_VERSION)?
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_HASH:=d71fd8dafc40147586f5bc6acca8fce5088d9c576d1142fe5aeb7b0813186a11
+PKG_HASH:=f51c2254749233b1b1d7ec9445158bd709f124f88e1c650fe2faac83c3a81938
 PKG_LICENSE:=GPL-2.0
 PKG_LICENSE_FILES:=COPYING
 

package/kernel/cryptodev-linux/patches/010-fix-build-for-kernel-v5.9-rc1.patch

@@ -1,32 +0,0 @@
-From 2f5e08aebf9229599aae7f25db752f74221cd71d Mon Sep 17 00:00:00 2001
-From: Joan Bruguera <joanbrugueram@gmail.com>
-Date: Fri, 14 Aug 2020 00:13:38 +0200
-Subject: [PATCH] Fix build for Linux 5.9-rc1
-
-See also: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=64019a2e467a288a16b65ab55ddcbf58c1b00187
-          https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bce617edecada007aee8610fbe2c14d10b8de2f6
-          https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/
-
-Signed-off-by: Joan Bruguera <joanbrugueram@gmail.com>
----
- zc.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/zc.c
-+++ b/zc.c
-@@ -76,10 +76,14 @@ int __get_userbuf(uint8_t __user *addr,
- 	ret = get_user_pages_remote(task, mm,
- 			(unsigned long)addr, pgcount, write ? FOLL_WRITE : 0,
- 			pg, NULL);
--#else
-+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(5, 9, 0))
- 	ret = get_user_pages_remote(task, mm,
- 			(unsigned long)addr, pgcount, write ? FOLL_WRITE : 0,
- 			pg, NULL, NULL);
-+#else
-+	ret = get_user_pages_remote(mm,
-+			(unsigned long)addr, pgcount, write ? FOLL_WRITE : 0,
-+			pg, NULL, NULL);
- #endif
- #if (LINUX_VERSION_CODE < KERNEL_VERSION(5, 8, 0))
- 	up_read(&mm->mmap_sem);

package/kernel/exfat/Makefile

@@ -7,12 +7,12 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=exfat
-PKG_VERSION:=5.12.3
+PKG_VERSION:=5.19.1
 PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/namjaejeon/linux-exfat-oot/tar.gz/$(PKG_VERSION)?
-PKG_HASH:=43889c73af76c466bbc904aff80354a62ecaa24c7b20e354ff735f5949907982
+PKG_HASH:=80750bfa3bcdf743ca0d027be8244cc7b6ccd78f20304c2cabbb4011c88e4f0a
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/linux-exfat-oot-$(PKG_VERSION)
 
 PKG_MAINTAINER:=

package/kernel/gpio-button-hotplug/src/gpio-button-hotplug.c

@@ -242,11 +242,11 @@ static int gpio_button_get_value(struct gpio_keys_button_data *bdata)
 	int val;
 
 	if (bdata->can_sleep)
-		val = !!gpio_get_value_cansleep(bdata->b->gpio);
+		val = !!gpiod_get_value_cansleep(bdata->gpiod);
 	else
-		val = !!gpio_get_value(bdata->b->gpio);
+		val = !!gpiod_get_value(bdata->gpiod);
 
-	return val ^ bdata->b->active_low;
+	return val;
 }
 
 static void gpio_keys_handle_button(struct gpio_keys_button_data *bdata)
@@ -365,7 +365,6 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 	struct device_node *node, *pp;
 	struct gpio_keys_platform_data *pdata;
 	struct gpio_keys_button *button;
-	int error;
 	int nbuttons;
 	int i = 0;
 
@@ -375,14 +374,12 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 	nbuttons = of_get_child_count(node);
 	if (nbuttons == 0)
-		return NULL;
+		return ERR_PTR(-EINVAL);
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata) + nbuttons * (sizeof *button),
 		GFP_KERNEL);
-	if (!pdata) {
-		error = -ENOMEM;
-		goto err_out;
-	}
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
 
 	pdata->buttons = (struct gpio_keys_button *)(pdata + 1);
 	pdata->nbuttons = nbuttons;
@@ -391,37 +388,13 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 	of_property_read_u32(node, "poll-interval", &pdata->poll_interval);
 
 	for_each_child_of_node(node, pp) {
-		enum of_gpio_flags flags;
-
-		if (!of_find_property(pp, "gpios", NULL)) {
-			pdata->nbuttons--;
-			dev_warn(dev, "Found button without gpios\n");
-			continue;
-		}
-
 		button = (struct gpio_keys_button *)(&pdata->buttons[i++]);
 
-		button->irq = irq_of_parse_and_map(pp, 0);
-
-		button->gpio = of_get_gpio_flags(pp, 0, &flags);
-		if (button->gpio < 0) {
-			error = button->gpio;
-			if (error != -ENOENT) {
-				if (error != -EPROBE_DEFER)
-					dev_err(dev,
-						"Failed to get gpio flags, error: %d\n",
-						error);
-				return ERR_PTR(error);
-			}
-		} else {
-			button->active_low = !!(flags & OF_GPIO_ACTIVE_LOW);
-		}
-
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {
-			dev_err(dev, "Button without keycode: 0x%x\n",
-				button->gpio);
-			error = -EINVAL;
-			goto err_out;
+			dev_err(dev, "Button node '%s' without keycode\n",
+				pp->full_name);
+			of_node_put(pp);
+			return ERR_PTR(-EINVAL);
 		}
 
 		button->desc = of_get_property(pp, "label", NULL);
@@ -434,17 +407,12 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 		if (of_property_read_u32(pp, "debounce-interval",
 					&button->debounce_interval))
 			button->debounce_interval = 5;
-	}
 
-	if (pdata->nbuttons == 0) {
-		error = -EINVAL;
-		goto err_out;
+		button->irq = irq_of_parse_and_map(pp, 0);
+		button->gpio = -ENOENT; /* mark this as device-tree */
 	}
 
 	return pdata;
-
-err_out:
-	return ERR_PTR(error);
 }
 
 static struct of_device_id gpio_keys_of_match[] = {
@@ -471,11 +439,12 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 static int gpio_keys_button_probe(struct platform_device *pdev,
 		struct gpio_keys_button_dev **_bdev, int polled)
 {
-	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
 	struct device *dev = &pdev->dev;
+	struct gpio_keys_platform_data *pdata = dev_get_platdata(dev);
 	struct gpio_keys_button_dev *bdev;
 	struct gpio_keys_button *buttons;
-	int error;
+	struct device_node *prev = NULL;
+	int error = 0;
 	int i;
 
 	if (!pdata) {
@@ -514,46 +483,67 @@ static int gpio_keys_button_probe(struct platform_device *pdev,
 	for (i = 0; i < pdata->nbuttons; i++) {
 		struct gpio_keys_button *button = &buttons[i];
 		struct gpio_keys_button_data *bdata = &bdev->data[i];
-		unsigned int gpio = button->gpio;
+		const char *desc = button->desc ? button->desc : DRV_NAME;
 
 		if (button->wakeup) {
 			dev_err(dev, "does not support wakeup\n");
-			return -EINVAL;
+			error = -EINVAL;
+			goto out;
 		}
 
 		bdata->map_entry = button_get_index(button->code);
 		if (bdata->map_entry < 0) {
-			dev_warn(dev, "does not support key code:%u\n",
+			dev_err(dev, "does not support key code:%u\n",
 				button->code);
-			continue;
+			error = -EINVAL;
+			goto out;
 		}
 
 		if (!(button->type == 0 || button->type == EV_KEY ||
 		      button->type == EV_SW)) {
-			dev_warn(dev, "only supports buttons or switches\n");
-			continue;
+			dev_err(dev, "only supports buttons or switches\n");
+			error = -EINVAL;
+			goto out;
 		}
 
-		error = devm_gpio_request(dev, gpio,
-				     button->desc ? button->desc : DRV_NAME);
-		if (error) {
-			dev_err(dev, "unable to claim gpio %u, err=%d\n",
-				gpio, error);
-			return error;
-		}
-		bdata->gpiod = gpio_to_desc(gpio);
-		if (!bdata->gpiod)
-			return -EINVAL;
+		if (gpio_is_valid(button->gpio)) {
+			/* legacy platform data... but is it the lookup table? */
+			bdata->gpiod = devm_gpiod_get_index(dev, desc, i,
+							    GPIOD_IN);
+			if (IS_ERR(bdata->gpiod)) {
+				/* or the legacy (button->gpio is good) way? */
+				error = devm_gpio_request_one(dev,
+					button->gpio, GPIOF_IN | (
+					button->active_low ? GPIOF_ACTIVE_LOW :
+					0), desc);
+				if (error) {
+					if (error != -EPROBE_DEFER) {
+						dev_err(dev, "unable to claim gpio %d, err=%d\n",
+							button->gpio, error);
+					}
+					goto out;
+				}
 
-		error = gpio_direction_input(gpio);
-		if (error) {
-			dev_err(dev,
-				"unable to set direction on gpio %u, err=%d\n",
-				gpio, error);
-			return error;
+				bdata->gpiod = gpio_to_desc(button->gpio);
+			}
+		} else {
+			/* Device-tree */
+			struct device_node *child =
+				of_get_next_child(dev->of_node, prev);
+
+			bdata->gpiod = devm_gpiod_get_from_of_node(dev,
+				child, "gpios", 0, GPIOD_IN, desc);
+
+			prev = child;
 		}
 
-		bdata->can_sleep = gpio_cansleep(gpio);
+		if (IS_ERR_OR_NULL(bdata->gpiod)) {
+			error = IS_ERR(bdata->gpiod) ? PTR_ERR(bdata->gpiod) :
+				-EINVAL;
+			goto out;
+		}
+
+		bdata->can_sleep = gpiod_cansleep(bdata->gpiod);
 		bdata->last_state = -1; /* Unknown state on boot */
 
 		if (bdev->polled) {
@@ -584,8 +574,11 @@ static int gpio_keys_button_probe(struct platform_device *pdev,
 	platform_set_drvdata(pdev, bdev);
 
 	*_bdev = bdev;
+	error = 0;
 
-	return 0;
+out:
+	of_node_put(prev);
+	return error;
 }
 
 static int gpio_keys_probe(struct platform_device *pdev)
@@ -594,9 +587,7 @@ static int gpio_keys_probe(struct platform_device *pdev)
 	struct gpio_keys_button_dev *bdev;
 	int ret, i;
 
-
 	ret = gpio_keys_button_probe(pdev, &bdev, 0);
-
 	if (ret)
 		return ret;
 
@@ -608,12 +599,8 @@ static int gpio_keys_probe(struct platform_device *pdev)
 
 		INIT_DELAYED_WORK(&bdata->work, gpio_keys_irq_work_func);
 
-		if (!bdata->gpiod)
-			continue;
-
 		if (!button->irq) {
-			bdata->irq = gpio_to_irq(button->gpio);
-
+			bdata->irq = gpiod_to_irq(bdata->gpiod);
 			if (bdata->irq < 0) {
 				dev_err(&pdev->dev, "failed to get irq for gpio:%d\n",
 					button->gpio);
@@ -631,7 +618,6 @@ static int gpio_keys_probe(struct platform_device *pdev)
 		ret = devm_request_threaded_irq(&pdev->dev,
 			bdata->irq, NULL, button_handle_irq,
 			irqflags, dev_name(&pdev->dev), bdata);
-
 		if (ret < 0) {
 			bdata->irq = 0;
 			dev_err(&pdev->dev, "failed to request irq:%d for gpio:%d\n",
@@ -653,14 +639,12 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 	int ret;
 
 	ret = gpio_keys_button_probe(pdev, &bdev, 1);
-
 	if (ret)
 		return ret;
 
 	INIT_DELAYED_WORK(&bdev->work, gpio_keys_polled_poll);
 
 	pdata = bdev->pdata;
-
 	if (pdata->enable)
 		pdata->enable(bdev->dev);
 

package/kernel/lantiq/ltq-atm/src/ltq_atm.c

@@ -41,6 +41,7 @@
 #include <linux/atm.h>
 #include <linux/clk.h>
 #include <linux/interrupt.h>
+#include <linux/version.h>
 #ifdef CONFIG_XFRM
   #include <net/xfrm.h>
 #endif
@@ -199,7 +200,12 @@ static inline void mailbox_aal_rx_handler(void);
 static irqreturn_t mailbox_irq_handler(int, void *);
 static inline void mailbox_signal(unsigned int, int);
 static void do_ppe_tasklet(unsigned long);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,9,0) && \
+    !(LINUX_VERSION_CODE < KERNEL_VERSION(5,5,0) && LINUX_VERSION_CODE > KERNEL_VERSION(5,4,235))
 DECLARE_TASKLET(g_dma_tasklet, do_ppe_tasklet, 0);
+#else
+DECLARE_TASKLET_OLD(g_dma_tasklet, do_ppe_tasklet);
+#endif
 
 /*
  *  QSB & HTU setting functions

package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_adsl.c

@@ -127,7 +127,11 @@ static int ptm_stop(struct net_device *);
   static int ptm_napi_poll(struct napi_struct *, int);
 static int ptm_hard_start_xmit(struct sk_buff *, struct net_device *);
 static int ptm_ioctl(struct net_device *, struct ifreq *, int);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,6,0)
 static void ptm_tx_timeout(struct net_device *);
+#else
+static void ptm_tx_timeout(struct net_device *, unsigned int txqueue);
+#endif
 
 /*
  *  DSL Data LED
@@ -511,7 +515,11 @@ static int ptm_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
     return 0;
 }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,6,0)
 static void ptm_tx_timeout(struct net_device *dev)
+#else
+static void ptm_tx_timeout(struct net_device *dev, unsigned int txqueue)
+#endif
 {
     int ndev;
 

package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_vdsl.c

@@ -77,7 +77,11 @@ static int ptm_stop(struct net_device *);
   static int ptm_napi_poll(struct napi_struct *, int);
 static int ptm_hard_start_xmit(struct sk_buff *, struct net_device *);
 static int ptm_ioctl(struct net_device *, struct ifreq *, int);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,6,0)
 static void ptm_tx_timeout(struct net_device *);
+#else
+static void ptm_tx_timeout(struct net_device *, unsigned int txqueue);
+#endif
 
 static inline struct sk_buff* alloc_skb_rx(void);
 static inline struct sk_buff* alloc_skb_tx(unsigned int);
@@ -125,7 +129,12 @@ static char *g_net_dev_name[1] = {"dsl0"};
 
 static int g_ptm_prio_queue_map[8];
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,9,0) && \
+    !(LINUX_VERSION_CODE < KERNEL_VERSION(5,5,0) && LINUX_VERSION_CODE > KERNEL_VERSION(5,4,235))
 static DECLARE_TASKLET(g_swap_desc_tasklet, do_swap_desc_tasklet, 0);
+#else
+static DECLARE_TASKLET_OLD(g_swap_desc_tasklet, do_swap_desc_tasklet);
+#endif
 
 
 unsigned int ifx_ptm_dbg_enable = DBG_ENABLE_MASK_ERR;
@@ -451,7 +460,11 @@ static int ptm_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
     return 0;
 }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,6,0)
 static void ptm_tx_timeout(struct net_device *dev)
+#else
+static void ptm_tx_timeout(struct net_device *dev, unsigned int txqueue)
+#endif
 {
     ASSERT(dev == g_net_dev[0], "incorrect device");
 

package/kernel/lantiq/ltq-tapi/patches/500-linux-509.patch

@@ -0,0 +1,51 @@
+--- a/src/drv_tapi_linux.c
++++ b/src/drv_tapi_linux.c
+@@ -3287,10 +3287,13 @@ static IFX_void_t proc_EntriesRemove(IFX
+ */
+ static IFX_void_t tapi_wq_setscheduler (IFX_int32_t foo)
+ {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(5,9,0)
+    struct sched_param sched_params;
+-
+    sched_params.sched_priority = TAPI_OS_THREAD_PRIO_HIGH;
+    sched_setscheduler(current, SCHED_FIFO, &sched_params);
++#else
++   sched_set_fifo_low(current);
++#endif
+ }
+ #endif /* LINUX_2_6 */
+ 
+@@ -3727,6 +3730,7 @@ static IFX_int32_t TAPI_SelectCh (TAPI_F
+ */
+ IFX_int32_t TAPI_OS_ThreadPriorityModify(IFX_uint32_t newPriority)
+ {
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(5,9,0))
+    struct sched_param sched_params;
+    IFX_int32_t ret;
+ 
+@@ -3744,6 +3748,10 @@ IFX_int32_t TAPI_OS_ThreadPriorityModify
+    }
+ 
+    return (ret < 0) ? IFX_ERROR : IFX_SUCCESS;
++#else
++   sched_set_fifo_low(current);
++   return IFX_SUCCESS;
++#endif
+ }
+ 
+ 
+--- a/src/drv_tapi_kpi.c
++++ b/src/drv_tapi_kpi.c
+@@ -134,7 +134,12 @@ extern IFX_int32_t           block_ingre
+ /* ========================================================================== */
+ static IFX_void_t ifx_tapi_KPI_IngressHandler (IFX_ulong_t foo);
+ #ifdef KPI_TASKLET
++#if LINUX_VERSION_CODE < KERNEL_VERSION(5,9,0) && \
++    !(LINUX_VERSION_CODE < KERNEL_VERSION(5,5,0) && LINUX_VERSION_CODE > KERNEL_VERSION(5,4,235))
+ DECLARE_TASKLET(tl_kpi_ingress, ifx_tapi_KPI_IngressHandler, 0L);
++#else
++DECLARE_TASKLET_OLD(tl_kpi_ingress, ifx_tapi_KPI_IngressHandler);
++#endif
+ #endif /* KPI_TASKLET */
+ static IFX_int32_t ifx_tapi_KPI_IngressThread (IFXOS_ThreadParams_t *pThread);
+ static IFX_return_t ifx_tapi_KPI_GroupInit(IFX_uint32_t nKpiGroup);

package/kernel/linux/modules/block.mk

@@ -508,6 +508,29 @@ endef
 $(eval $(call KernelPackage,nbd))
 
 
+define KernelPackage/nvme
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=NVM Express block device
+  DEPENDS:=@PCI_SUPPORT
+  KCONFIG:= \
+	CONFIG_NVME_CORE \
+	CONFIG_BLK_DEV_NVME \
+	CONFIG_NVME_MULTIPATH=n \
+	CONFIG_NVME_HWMON=n
+  FILES:= \
+	$(LINUX_DIR)/drivers/nvme/host/nvme-core.ko \
+	$(LINUX_DIR)/drivers/nvme/host/nvme.ko
+  AUTOLOAD:=$(call AutoLoad,30,nvme-core nvme)
+endef
+
+define KernelPackage/nvme/description
+ Kernel module for NVM Express solid state drives directly
+ connected to the PCI or PCI Express bus.
+endef
+
+$(eval $(call KernelPackage,nvme))
+
+
 define KernelPackage/scsi-core
   SUBMENU:=$(BLOCK_MENU)
   TITLE:=SCSI device support

package/kernel/linux/modules/crypto.mk

@@ -440,28 +440,6 @@ endef
 $(eval $(call KernelPackage,crypto-kpp))
 
 
-define KernelPackage/crypto-lib-blake2s
-  TITLE:=BLAKE2s hash function library
-  KCONFIG:=CONFIG_CRYPTO_LIB_BLAKE2S
-  HIDDEN:=1
-  FILES:= \
-	$(LINUX_DIR)/lib/crypto/libblake2s.ko \
-	$(LINUX_DIR)/lib/crypto/libblake2s-generic.ko
-  $(call AddDepends/crypto,+PACKAGE_kmod-crypto-hash:kmod-crypto-hash)
-endef
-
-define KernelPackage/crypto-lib-blake2s/config
-  imply PACKAGE_kmod-crypto-hash
-endef
-
-define KernelPackage/crypto-lib-blake2s/x86/64
-  KCONFIG+=CONFIG_CRYPTO_BLAKE2S_X86
-  FILES+=$(LINUX_DIR)/arch/x86/crypto/blake2s-x86_64.ko
-endef
-
-$(eval $(call KernelPackage,crypto-lib-blake2s))
-
-
 define KernelPackage/crypto-lib-chacha20
   TITLE:=ChaCha library interface
   KCONFIG:=CONFIG_CRYPTO_LIB_CHACHA
@@ -623,7 +601,8 @@ define KernelPackage/crypto-md5
   DEPENDS:=+kmod-crypto-hash
   KCONFIG:= \
 	CONFIG_CRYPTO_MD5 \
-	CONFIG_CRYPTO_MD5_OCTEON
+	CONFIG_CRYPTO_MD5_OCTEON \
+	CONFIG_CRYPTO_MD5_PPC
   FILES:=$(LINUX_DIR)/crypto/md5.ko
   AUTOLOAD:=$(call AutoLoad,09,md5)
   $(call AddDepends/crypto)
@@ -634,6 +613,11 @@ define KernelPackage/crypto-md5/octeon
   AUTOLOAD+=$(call AutoLoad,09,octeon-md5)
 endef
 
+define KernelPackage/crypto-md5/mpc85xx
+  FILES+=$(LINUX_DIR)/arch/powerpc/crypto/md5-ppc.ko
+  AUTOLOAD+=$(call AutoLoad,09,md5-ppc)
+endef
+
 $(eval $(call KernelPackage,crypto-md5))
 
 
@@ -845,6 +829,7 @@ define KernelPackage/crypto-sha1
 	CONFIG_CRYPTO_SHA1_ARM \
 	CONFIG_CRYPTO_SHA1_ARM_NEON \
 	CONFIG_CRYPTO_SHA1_OCTEON \
+	CONFIG_CRYPTO_SHA1_PPC_SPE \
 	CONFIG_CRYPTO_SHA1_SSSE3
   FILES:=$(LINUX_DIR)/crypto/sha1_generic.ko
   AUTOLOAD:=$(call AutoLoad,09,sha1_generic)
@@ -871,7 +856,12 @@ define KernelPackage/crypto-sha1/octeon
   AUTOLOAD+=$(call AutoLoad,09,octeon-sha1)
 endef
 
-KernelPackage/crypto-sha1/tegra=$(KernelPakcage/crypto-sha1/arm)
+KernelPackage/crypto-sha1/tegra=$(KernelPackage/crypto-sha1/arm)
+
+define KernelPackage/crypto-sha1/mpc85xx
+  FILES+=$(LINUX_DIR)/arch/powerpc/crypto/sha1-ppc-spe.ko
+  AUTOLOAD+=$(call AutoLoad,09,sha1-ppc-spe)
+endef
 
 define KernelPackage/crypto-sha1/x86/64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha1-ssse3.ko
@@ -887,6 +877,7 @@ define KernelPackage/crypto-sha256
   KCONFIG:= \
 	CONFIG_CRYPTO_SHA256 \
 	CONFIG_CRYPTO_SHA256_OCTEON \
+	CONFIG_CRYPTO_SHA256_PPC_SPE \
 	CONFIG_CRYPTO_SHA256_SSSE3
   FILES:= \
 	$(LINUX_DIR)/crypto/sha256_generic.ko \
@@ -900,6 +891,11 @@ define KernelPackage/crypto-sha256/octeon
   AUTOLOAD+=$(call AutoLoad,09,octeon-sha256)
 endef
 
+define KernelPackage/crypto-sha256/mpc85xx
+  FILES+=$(LINUX_DIR)/arch/powerpc/crypto/sha256-ppc-spe.ko
+  AUTOLOAD+=$(call AutoLoad,09,sha256-ppc-spe)
+endef
+
 define KernelPackage/crypto-sha256/x86/64
   FILES+=$(LINUX_DIR)/arch/x86/crypto/sha256-ssse3.ko
   AUTOLOAD+=$(call AutoLoad,09,sha256-ssse3)

package/kernel/linux/modules/fs.mk

@@ -462,7 +462,7 @@ $(eval $(call KernelPackage,fs-nfsd))
 
 define KernelPackage/fs-ntfs
   SUBMENU:=$(FS_MENU)
-  TITLE:=NTFS filesystem support
+  TITLE:=NTFS filesystem read-only (old driver) support
   KCONFIG:=CONFIG_NTFS_FS
   FILES:=$(LINUX_DIR)/fs/ntfs/ntfs.ko
   AUTOLOAD:=$(call AutoLoad,30,ntfs)
@@ -470,7 +470,8 @@ define KernelPackage/fs-ntfs
 endef
 
 define KernelPackage/fs-ntfs/description
- Kernel module for NTFS filesystem support
+ Kernel module for limited NTFS filesystem support. Support for writing
+ is extremely limited and disabled as a result.
 endef
 
 $(eval $(call KernelPackage,fs-ntfs))

package/kernel/linux/modules/leds.mk

@@ -84,6 +84,22 @@ endef
 $(eval $(call KernelPackage,ledtrig-oneshot))
 
 
+define KernelPackage/ledtrig-pattern
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=LED Pattern Trigger
+  KCONFIG:=CONFIG_LEDS_TRIGGER_PATTERN
+  FILES:=$(LED_TRIGGER_DIR)/ledtrig-pattern.ko
+  AUTOLOAD:=$(call AutoLoad,50,ledtrig-pattern)
+endef
+
+define KernelPackage/ledtrig-pattern/description
+ This allows LEDs to be controlled by a software or hardware pattern
+ which is a series of tuples, of brightness and duration (ms).
+endef
+
+$(eval $(call KernelPackage,ledtrig-pattern))
+
+
 define KernelPackage/leds-pca963x
   SUBMENU:=$(LEDS_MENU)
   TITLE:=PCA963x LED support
@@ -114,3 +130,17 @@ define KernelPackage/leds-pwm/description
 endef
 
 $(eval $(call KernelPackage,leds-pwm))
+
+define KernelPackage/leds-uleds
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=Userspace LEDs
+  KCONFIG:=CONFIG_LEDS_USER
+  FILES:=$(LINUX_DIR)/drivers/leds/uleds.ko
+  AUTOLOAD:=$(call AutoLoad,60,uleds,1)
+endef
+
+define KernelPackage/leds-uleds/description
+ This option enables support for userspace LEDs.
+endef
+
+$(eval $(call KernelPackage,leds-uleds))

package/kernel/linux/modules/netfilter.mk

@@ -563,23 +563,6 @@ endef
 $(eval $(call KernelPackage,nf-nathelper-extra))
 
 
-define KernelPackage/ipt-ulog
-  TITLE:=Module for user-space packet logging
-  KCONFIG:=$(KCONFIG_IPT_ULOG)
-  FILES:=$(foreach mod,$(IPT_ULOG-m),$(LINUX_DIR)/net/$(mod).ko)
-  AUTOLOAD:=$(call AutoProbe,$(notdir $(IPT_ULOG-m)))
-  $(call AddDepends/ipt)
-endef
-
-define KernelPackage/ipt-ulog/description
- Netfilter (IPv4) module for user-space packet logging
- Includes:
- - ULOG
-endef
-
-$(eval $(call KernelPackage,ipt-ulog))
-
-
 define KernelPackage/ipt-nflog
   TITLE:=Module for user-space packet logging
   KCONFIG:=$(KCONFIG_IPT_NFLOG)

package/kernel/linux/modules/netsupport.mk

@@ -162,38 +162,6 @@ endef
 $(eval $(call KernelPackage,misdn))
 
 
-define KernelPackage/isdn4linux
-  SUBMENU:=$(NETWORK_SUPPORT_MENU)
-  TITLE:=Old ISDN4Linux (deprecated)
-  DEPENDS:=+kmod-ppp
-  KCONFIG:= \
-	CONFIG_ISDN=y \
-    CONFIG_ISDN_I4L \
-    CONFIG_ISDN_PPP=y \
-    CONFIG_ISDN_PPP_VJ=y \
-    CONFIG_ISDN_MPP=y \
-    CONFIG_IPPP_FILTER=y \
-    CONFIG_ISDN_PPP_BSDCOMP \
-    CONFIG_ISDN_CAPI_MIDDLEWARE=y \
-    CONFIG_ISDN_CAPI_CAPIFS_BOOL=y \
-    CONFIG_ISDN_AUDIO=y \
-    CONFIG_ISDN_TTY_FAX=y \
-    CONFIG_ISDN_X25=y \
-    CONFIG_ISDN_DIVERSION
-  FILES:= \
-    $(LINUX_DIR)/drivers/isdn/divert/dss1_divert.ko \
-	$(LINUX_DIR)/drivers/isdn/i4l/isdn.ko \
-	$(LINUX_DIR)/drivers/isdn/i4l/isdn_bsdcomp.ko
-  AUTOLOAD:=$(call AutoLoad,40,isdn isdn_bsdcomp dss1_divert)
-endef
-
-define KernelPackage/isdn4linux/description
-  This driver allows you to use an ISDN adapter for networking
-endef
-
-$(eval $(call KernelPackage,isdn4linux))
-
-
 define KernelPackage/ipip
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
   TITLE:=IP-in-IP encapsulation
@@ -721,7 +689,7 @@ $(eval $(call KernelPackage,mppe))
 
 
 SCHED_MODULES = $(patsubst $(LINUX_DIR)/net/sched/%.ko,%,$(wildcard $(LINUX_DIR)/net/sched/*.ko))
-SCHED_MODULES_CORE = sch_ingress sch_fq_codel sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_tcindex cls_u32 em_u32 act_gact act_mirred act_skbedit cls_matchall
+SCHED_MODULES_CORE = sch_ingress sch_fq_codel sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_u32 em_u32 act_gact act_mirred act_skbedit cls_matchall
 SCHED_MODULES_FILTER = $(SCHED_MODULES_CORE) act_connmark act_ctinfo sch_cake sch_netem sch_mqprio em_ipset cls_bpf cls_flower act_bpf act_vlan
 SCHED_MODULES_EXTRA = $(filter-out $(SCHED_MODULES_FILTER),$(SCHED_MODULES))
 SCHED_FILES = $(patsubst %,$(LINUX_DIR)/net/sched/%.ko,$(filter $(SCHED_MODULES_CORE),$(SCHED_MODULES)))
@@ -743,7 +711,6 @@ define KernelPackage/sched-core
 	CONFIG_NET_CLS_FLOW \
 	CONFIG_NET_CLS_FW \
 	CONFIG_NET_CLS_ROUTE4 \
-	CONFIG_NET_CLS_TCINDEX \
 	CONFIG_NET_CLS_U32 \
 	CONFIG_NET_ACT_GACT \
 	CONFIG_NET_ACT_MIRRED \
@@ -1263,7 +1230,6 @@ define KernelPackage/wireguard
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
   TITLE:=WireGuard secure network tunnel
   DEPENDS:= \
-	  +kmod-crypto-lib-blake2s \
 	  +kmod-crypto-lib-chacha20poly1305 \
 	  +kmod-crypto-lib-curve25519 \
 	  +kmod-udptunnel4 \

package/kernel/linux/modules/other.mk

@@ -665,22 +665,6 @@ endef
 
 $(eval $(call KernelPackage,rtc-pcf2127))
 
-define KernelPackage/rtc-pt7c4338
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Pericom PT7C4338 RTC support
-  DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
-  DEPENDS:=+kmod-i2c-core
-  KCONFIG:=CONFIG_RTC_DRV_PT7C4338 \
-	CONFIG_RTC_CLASS=y
-  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
-  AUTOLOAD:=$(call AutoProbe,rtc-pt7c4338)
-endef
-
-define KernelPackage/rtc-pt7c4338/description
- Kernel module for Pericom PT7C4338 i2c RTC chip
-endef
-
-$(eval $(call KernelPackage,rtc-pt7c4338))
 
 define KernelPackage/rtc-rs5c372a
   SUBMENU:=$(OTHER_MENU)

package/kernel/linux/modules/w1.mk

@@ -160,23 +160,6 @@ endef
 $(eval $(call KernelPackage,w1-slave-ds2433))
 
 
-define KernelPackage/w1-slave-ds2760
-  TITLE:=Dallas 2760 battery monitor chip (HP iPAQ & others)
-  KCONFIG:= \
-	CONFIG_W1_SLAVE_DS2760 \
-	CONFIG_W1_SLAVE_DS2433_CRC=n
-  FILES:=$(W1_SLAVES_DIR)/w1_ds2760.ko
-  AUTOLOAD:=$(call AutoProbe,w1_ds2760)
-  $(call AddDepends/w1)
-endef
-
-define KernelPackage/w1-slave-ds2760/description
- Kernel module for 1-wire DS2760 battery monitor chip support
-endef
-
-$(eval $(call KernelPackage,w1-slave-ds2760))
-
-
 define KernelPackage/w1-slave-ds2413
   TITLE:=DS2413 2 Ch. Addressable Switch
   KCONFIG:= \

package/kernel/mac80211/Makefile

@@ -10,10 +10,10 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=5.10.68-1
+PKG_VERSION:=5.10.168-1
 PKG_RELEASE:=1
-PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.10.68/
-PKG_HASH:=bba161b0084590c677a84b80993709e388a3c478f29ed0c475d4fce1b9162968
+PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.10.168/
+PKG_HASH:=ba43215e99b367febaad507c94423b156c7af9a415d978fbc630e9e8d6641d73
 
 PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)
@@ -434,9 +434,15 @@ config-$(call config_package,rsi91x-sdio) += RSI_SDIO
 
 config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS
 
+C_DEFINES=
+
+ifeq ($(BUILD_VARIANT),smallbuffers)
+	C_DEFINES+= -DCONFIG_ATH10K_SMALLBUFFERS
+endif
+
 MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \
 	$(KERNEL_MAKE_FLAGS) \
-	EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include $(IREMAP_CFLAGS)" \
+	EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include $(IREMAP_CFLAGS) $(C_DEFINES)" \
 	KLIB_BUILD="$(LINUX_DIR)" \
 	MODPROBE=true \
 	KLIB=$(TARGET_MODULES_DIR) \

package/kernel/mac80211/ath.mk

@@ -1,5 +1,5 @@
 PKG_DRIVERS += \
-	ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k \
+	ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k ath10k-smallbuffers \
 	carl9170 owl-loader ar5523 wil6210
 
 PKG_CONFIG_DEPENDS += \
@@ -55,6 +55,7 @@ config-$(CONFIG_ATH10K_THERMAL) += ATH10K_THERMAL
 
 config-$(call config_package,ath9k-htc) += ATH9K_HTC
 config-$(call config_package,ath10k) += ATH10K ATH10K_PCI
+config-$(call config_package,ath10k-smallbuffers) += ATH10K ATH10K_PCI ATH10K_SMALLBUFFERS
 
 config-$(call config_package,ath5k) += ATH5K
 ifdef CONFIG_TARGET_ath25
@@ -260,6 +261,7 @@ define KernelPackage/ath10k
 	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
 	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
   AUTOLOAD:=$(call AutoProbe,ath10k_pci)
+  VARIANT:=regular
 endef
 
 define KernelPackage/ath10k/description
@@ -273,14 +275,20 @@ define KernelPackage/ath10k/config
        config ATH10K_LEDS
                bool "Enable LED support"
                default y
-               depends on PACKAGE_kmod-ath10k
+               depends on PACKAGE_kmod-ath10k || PACKAGE_kmod-ath10k-smallbuffers
 
        config ATH10K_THERMAL
                bool "Enable thermal sensors and throttling support"
-               depends on PACKAGE_kmod-ath10k
+               depends on PACKAGE_kmod-ath10k || PACKAGE_kmod-ath10k-smallbuffers
 
 endef
 
+define KernelPackage/ath10k-smallbuffers
+  $(call KernelPackage/ath10k)
+  TITLE+= (small buffers for low-RAM devices)
+  VARIANT:=smallbuffers
+endef
+
 define KernelPackage/carl9170
   $(call KernelPackage/mac80211/Default)
   TITLE:=Driver for Atheros AR9170 USB sticks

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -26,7 +26,6 @@ drv_mac80211_init_device_config() {
 	hostapd_common_add_device_config
 
 	config_add_string path phy 'macaddr:macaddr'
-	config_add_string hwmode
 	config_add_string tx_burst
 	config_add_string distance
 	config_add_int beacon_int chanbw frag rts
@@ -44,11 +43,26 @@ drv_mac80211_init_device_config() {
 		su_beamformee \
 		mu_beamformer \
 		mu_beamformee \
+		he_su_beamformer \
+		he_su_beamformee \
+		he_mu_beamformer \
 		vht_txop_ps \
 		htc_vht \
 		rx_antenna_pattern \
-		tx_antenna_pattern
-	config_add_int vht_max_a_mpdu_len_exp vht_max_mpdu vht_link_adapt vht160 rx_stbc tx_stbc
+		tx_antenna_pattern \
+		he_spr_sr_control \
+		he_twt_required
+	config_add_int \
+		beamformer_antennas \
+		beamformee_antennas \
+		vht_max_a_mpdu_len_exp \
+		vht_max_mpdu \
+		vht_link_adapt \
+		vht160 \
+		rx_stbc \
+		tx_stbc \
+		he_bss_color \
+		he_spr_non_srg_obss_pd_max_offset
 	config_add_boolean \
 		ldpc \
 		greenfield \
@@ -96,6 +110,23 @@ mac80211_add_capabilities() {
 	export -n -- "$__var=$__out"
 }
 
+mac80211_add_he_capabilities() {
+	local __out= oifs
+
+	oifs="$IFS"
+	IFS=:
+	for capab in "$@"; do
+		set -- $capab
+		[ "$(($4))" -gt 0 ] || continue
+		[ "$(((0x$2) & $3))" -gt 0 ] || {
+			eval "$1=0"
+			continue
+		}
+		append base_cfg "$1=1" "$N"
+	done
+	IFS="$oifs"
+}
+
 mac80211_hostapd_setup_base() {
 	local phy="$1"
 
@@ -119,6 +150,9 @@ mac80211_hostapd_setup_base() {
 	[ "$noscan" -gt 0 ] && hostapd_noscan=1
 	[ "$tx_burst" = 0 ] && tx_burst=
 
+	chan_ofs=0
+	[ "$band" = "6g" ] && chan_ofs=1
+
 	ieee80211n=1
 	ht_capab=
 	case "$htmode" in
@@ -126,7 +160,7 @@ mac80211_hostapd_setup_base() {
 		HT40*|VHT40|VHT80|VHT160|HE40|HE80|HE160)
 			case "$hwmode" in
 				a)
-					case "$(( ($channel / 4) % 2 ))" in
+					case "$(( (($channel / 4) + $chan_ofs) % 2 ))" in
 						1) ht_capab="[HT40+]";;
 						0) ht_capab="[HT40-]";;
 					esac
@@ -200,7 +234,7 @@ mac80211_hostapd_setup_base() {
 	case "$htmode" in
 		VHT20|HE20) enable_ac=1;;
 		VHT40|HE40)
-			case "$(( ($channel / 4) % 2 ))" in
+			case "$(( (($channel / 4) + $chan_ofs) % 2 ))" in
 				1) idx=$(($channel + 2));;
 				0) idx=$(($channel - 2));;
 			esac
@@ -208,7 +242,7 @@ mac80211_hostapd_setup_base() {
 			vht_center_seg0=$idx
 		;;
 		VHT80|HE80)
-			case "$(( ($channel / 4) % 4 ))" in
+			case "$(( (($channel / 4) + $chan_ofs) % 4 ))" in
 				1) idx=$(($channel + 6));;
 				2) idx=$(($channel + 2));;
 				3) idx=$(($channel - 2));;
@@ -219,15 +253,35 @@ mac80211_hostapd_setup_base() {
 			vht_center_seg0=$idx
 		;;
 		VHT160|HE160)
-			case "$channel" in
-				36|40|44|48|52|56|60|64) idx=50;;
-				100|104|108|112|116|120|124|128) idx=114;;
-			esac
+			if [ "$band" = "6g" ]; then
+				case "$channel" in
+					1|5|9|13|17|21|25|29) idx=15;;
+					33|37|41|45|49|53|57|61) idx=47;;
+					65|69|73|77|81|85|89|93) idx=79;;
+					97|101|105|109|113|117|121|125) idx=111;;
+					129|133|137|141|145|149|153|157) idx=143;;
+					161|165|169|173|177|181|185|189) idx=175;;
+					193|197|201|205|209|213|217|221) idx=207;;
+				esac
+			else
+				case "$channel" in
+					36|40|44|48|52|56|60|64) idx=50;;
+					100|104|108|112|116|120|124|128) idx=114;;
+				esac
+			fi
 			enable_ac=1
 			vht_oper_chwidth=2
 			vht_center_seg0=$idx
 		;;
 	esac
+	[ "$band" = "6g" ] && {
+		op_class=
+		case "$htmode" in
+			HE20) op_class=131;;
+			HE*) op_class=$((132 + $vht_oper_chwidth))
+		esac
+		[ -n "$op_class" ] && append base_cfg "op_class=$op_class" "$N"
+	}
 	[ "$hwmode" = "a" ] || enable_ac=0
 
 	if [ "$enable_ac" != "0" ]; then
@@ -242,6 +296,8 @@ mac80211_hostapd_setup_base() {
 			mu_beamformee:1 \
 			vht_txop_ps:1 \
 			htc_vht:1 \
+			beamformee_antennas:4 \
+			beamformer_antennas:4 \
 			rx_antenna_pattern:1 \
 			tx_antenna_pattern:1 \
 			vht_max_a_mpdu_len_exp:7 \
@@ -282,6 +338,18 @@ mac80211_hostapd_setup_base() {
 			RX-STBC-123:0x700:0x300:1 \
 			RX-STBC-1234:0x700:0x400:1 \
 
+		[ "$(($vht_cap & 0x800))" -gt 0 -a "$su_beamformer" -gt 0 ] && {
+			cap_ant="$(( ( ($vht_cap >> 16) & 3 ) + 1 ))"
+			[ "$cap_ant" -gt "$beamformer_antennas" ] && cap_ant="$beamformer_antennas"
+			[ "$cap_ant" -gt 1 ] && vht_capab="$vht_capab[SOUNDING-DIMENSION-$cap_ant]"
+		}
+
+		[ "$(($vht_cap & 0x1000))" -gt 0 -a "$su_beamformee" -gt 0 ] && {
+			cap_ant="$(( ( ($vht_cap >> 13) & 3 ) + 1 ))"
+			[ "$cap_ant" -gt "$beamformee_antennas" ] && cap_ant="$beamformee_antennas"
+			[ "$cap_ant" -gt 1 ] && vht_capab="$vht_capab[BF-ANTENNA-$cap_ant]"
+		}
+
 		# supported Channel widths
 		vht160_hw=0
 		[ "$(($vht_cap & 12))" -eq 4 -a 1 -le "$vht160" ] && \
@@ -337,16 +405,62 @@ mac80211_hostapd_setup_base() {
 	esac
 
 	if [ "$enable_ax" != "0" ]; then
+		json_get_vars \
+			he_su_beamformer:1 \
+			he_su_beamformee:0 \
+			he_mu_beamformer:1 \
+			he_twt_required:0 \
+			he_spr_sr_control:0 \
+			he_spr_non_srg_obss_pd_max_offset:1 \
+			he_bss_color
+
+		he_phy_cap=$(iw phy "$phy" info | awk -F "[()]" '/HE PHY Capabilities/ { print $2 }' | head -1)
+		he_phy_cap=${he_phy_cap:2}
+		he_mac_cap=$(iw phy "$phy" info | awk -F "[()]" '/HE MAC Capabilities/ { print $2 }' | head -1)
+		he_mac_cap=${he_mac_cap:2}
+
 		append base_cfg "ieee80211ax=1" "$N"
+		[ -n "$he_bss_color" ] && append base_cfg "he_bss_color=$he_bss_color" "$N"
 		[ "$hwmode" = "a" ] && {
 			append base_cfg "he_oper_chwidth=$vht_oper_chwidth" "$N"
 			append base_cfg "he_oper_centr_freq_seg0_idx=$vht_center_seg0" "$N"
 		}
+
+		mac80211_add_he_capabilities \
+			he_su_beamformer:${he_phy_cap:6:2}:0x80:$he_su_beamformer \
+			he_su_beamformee:${he_phy_cap:8:2}:0x1:$he_su_beamformee \
+			he_mu_beamformer:${he_phy_cap:8:2}:0x2:$he_mu_beamformer \
+			he_spr_sr_control:${he_phy_cap:14:2}:0x1:$he_spr_sr_control \
+			he_twt_required:${he_mac_cap:0:2}:0x6:$he_twt_required
+
+		[ "$he_spr_sr_control" -gt 0 ] && append base_cfg "he_spr_non_srg_obss_pd_max_offset=$he_spr_non_srg_obss_pd_max_offset" "$N"
+
 		append base_cfg "he_default_pe_duration=4" "$N"
 		append base_cfg "he_rts_threshold=1023" "$N"
-		append base_cfg "he_su_beamformer=1" "$N"
-		append base_cfg "he_su_beamformee=1" "$N"
-		append base_cfg "he_mu_beamformer=1" "$N"
+		append base_cfg "he_mu_edca_qos_info_param_count=0" "$N"
+		append base_cfg "he_mu_edca_qos_info_q_ack=0" "$N"
+		append base_cfg "he_mu_edca_qos_info_queue_request=0" "$N"
+		append base_cfg "he_mu_edca_qos_info_txop_request=0" "$N"
+		append base_cfg "he_mu_edca_ac_be_aifsn=8" "$N"
+		append base_cfg "he_mu_edca_ac_be_aci=0" "$N"
+		append base_cfg "he_mu_edca_ac_be_ecwmin=9" "$N"
+		append base_cfg "he_mu_edca_ac_be_ecwmax=10" "$N"
+		append base_cfg "he_mu_edca_ac_be_timer=255" "$N"
+		append base_cfg "he_mu_edca_ac_bk_aifsn=15" "$N"
+		append base_cfg "he_mu_edca_ac_bk_aci=1" "$N"
+		append base_cfg "he_mu_edca_ac_bk_ecwmin=9" "$N"
+		append base_cfg "he_mu_edca_ac_bk_ecwmax=10" "$N"
+		append base_cfg "he_mu_edca_ac_bk_timer=255" "$N"
+		append base_cfg "he_mu_edca_ac_vi_ecwmin=5" "$N"
+		append base_cfg "he_mu_edca_ac_vi_ecwmax=7" "$N"
+		append base_cfg "he_mu_edca_ac_vi_aifsn=5" "$N"
+		append base_cfg "he_mu_edca_ac_vi_aci=2" "$N"
+		append base_cfg "he_mu_edca_ac_vi_timer=255" "$N"
+		append base_cfg "he_mu_edca_ac_vo_aifsn=5" "$N"
+		append base_cfg "he_mu_edca_ac_vo_aci=3" "$N"
+		append base_cfg "he_mu_edca_ac_vo_ecwmin=5" "$N"
+		append base_cfg "he_mu_edca_ac_vo_ecwmax=7" "$N"
+		append base_cfg "he_mu_edca_ac_vo_timer=255" "$N"
 	fi
 
 	hostapd_prepare_device_config "$hostapd_conf_file" nl80211
@@ -528,7 +642,7 @@ mac80211_iw_interface_add() {
 		rc="$?"
 	}
 
-	[ "$rc" != 0 ] && wireless_setup_failed INTERFACE_CREATION_FAILED
+	[ "$rc" != 0 ] && echo "Failed to create interface $ifname"
 	return $rc
 }
 
@@ -689,14 +803,8 @@ mac80211_prepare_iw_htmode() {
 	case "$htmode" in
 		VHT20|HT20) iw_htmode=HT20;;
 		HT40*|VHT40|VHT160)
-			case "$hwmode" in
-				a)
-					case "$(( ($channel / 4) % 2 ))" in
-						1) iw_htmode="HT40+" ;;
-						0) iw_htmode="HT40-";;
-					esac
-				;;
-				*)
+			case "$band" in
+				2g)
 					case "$htmode" in
 						HT40+) iw_htmode="HT40+";;
 						HT40-) iw_htmode="HT40-";;
@@ -709,6 +817,12 @@ mac80211_prepare_iw_htmode() {
 						;;
 					esac
 				;;
+				*)
+					case "$(( ($channel / 4) % 2 ))" in
+						1) iw_htmode="HT40+" ;;
+						0) iw_htmode="HT40-";;
+					esac
+				;;
 			esac
 			[ "$auto_channel" -gt 0 ] && iw_htmode="HT40+"
 		;;
@@ -763,6 +877,7 @@ mac80211_setup_adhoc() {
 	mcval=
 	[ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
 
+	iw dev "$ifname" set type ibss
 	iw dev "$ifname" ibss join "$ssid" $freq $iw_htmode fixed-freq $bssid \
 		beacon-interval $beacon_int \
 		${brstr:+basic-rates $brstr} \
@@ -818,7 +933,6 @@ mac80211_setup_vif() {
 		mesh)
 			wireless_vif_parse_encryption
 			[ -z "$htmode" ] && htmode="NOHT";
-			freq="$(get_freq "$phy" "$channel")"
 			if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ] || chan_is_dfs "$phy" "$channel"; then
 				mac80211_setup_supplicant $vif_enable || failed=1
 			else
@@ -832,7 +946,6 @@ mac80211_setup_vif() {
 		adhoc)
 			wireless_vif_parse_encryption
 			if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then
-				freq="$(get_freq "$phy" "$channel")"
 				mac80211_setup_supplicant_noctl $vif_enable || failed=1
 			else
 				mac80211_setup_adhoc $vif_enable
@@ -849,10 +962,30 @@ mac80211_setup_vif() {
 
 get_freq() {
 	local phy="$1"
-	local chan="$2"
-	iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
+	local channel="$2"
+	local band="$3"
+
+	case "$band" in
+		2g) band="1:";;
+		5g) band="2:";;
+		60g) band="3:";;
+		6g) band="4:";;
+	esac
+
+	iw "$phy" info | awk -v band="$band" -v channel="[$channel]" '
+
+$1 ~ /Band/ {
+	band_match = band == $2
 }
 
+band_match && $3 == "MHz" && $4 == channel {
+	print $2
+	exit
+}
+'
+}
+
+
 chan_is_dfs() {
 	local phy="$1"
 	local chan="$2"
@@ -933,7 +1066,7 @@ drv_mac80211_setup() {
 	done
 
 	# convert channel to frequency
-	[ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel")"
+	[ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel" "$band")"
 
 	[ -n "$country" ] && {
 		iw reg get | grep -q "^country $country:" || {

package/kernel/mac80211/files/lib/wifi/mac80211.sh

@@ -57,6 +57,85 @@ check_mac80211_device() {
 	[ "$phy" = "$dev" ] && found=1
 }
 
+
+__get_band_defaults() {
+	local phy="$1"
+
+	( iw phy "$phy" info; echo ) | awk '
+BEGIN {
+        bands = ""
+}
+
+($1 == "Band" || $1 == "") && band {
+        if (channel) {
+		mode="NOHT"
+		if (ht) mode="HT20"
+		if (vht && band != "1:") mode="VHT80"
+		if (he) mode="HE80"
+		if (he && band == "1:") mode="HE20"
+                sub("\\[", "", channel)
+                sub("\\]", "", channel)
+                bands = bands band channel ":" mode " "
+        }
+        band=""
+}
+
+$1 == "Band" {
+        band = $2
+        channel = ""
+	vht = ""
+	ht = ""
+	he = ""
+}
+
+$0 ~ "Capabilities:" {
+	ht=1
+}
+
+$0 ~ "VHT Capabilities" {
+	vht=1
+}
+
+$0 ~ "HE Iftypes" {
+	he=1
+}
+
+$1 == "*" && $3 == "MHz" && $0 !~ /disabled/ && band && !channel {
+        channel = $4
+}
+
+END {
+        print bands
+}'
+}
+
+get_band_defaults() {
+	local phy="$1"
+
+	for c in $(__get_band_defaults "$phy"); do
+		local band="${c%%:*}"
+		c="${c#*:}"
+		local chan="${c%%:*}"
+		c="${c#*:}"
+		local mode="${c%%:*}"
+
+		case "$band" in
+			1) band=2g;;
+			2) band=5g;;
+			3) band=60g;;
+			4) band=6g;;
+			*) band="";;
+		esac
+
+		[ -n "$band" ] || continue
+		[ -n "$mode_band" -a "$band" = "6g" ] && return
+
+		mode_band="$band"
+		channel="$chan"
+		htmode="$mode"
+	done
+}
+
 detect_mac80211() {
 	devidx=0
 	config_load wireless
@@ -75,26 +154,12 @@ detect_mac80211() {
 		config_foreach check_mac80211_device wifi-device
 		[ "$found" -gt 0 ] && continue
 
-		mode_band="g"
-		channel="11"
+		mode_band=""
+		channel=""
 		htmode=""
 		ht_capab=""
 
-		iw phy "$dev" info | grep -q 'Capabilities:' && htmode=HT20
-
-		iw phy "$dev" info | grep -q '\* 5... MHz \[' && {
-			mode_band="a"
-			channel=$(iw phy "$dev" info | grep '\* 5... MHz \[' | grep '(disabled)' -v -m 1 | sed 's/[^[]*\[\|\].*//g')
-			iw phy "$dev" info | grep -q 'VHT Capabilities' && htmode="VHT80"
-		}
-
-		iw phy "$dev" info | grep -q '\* 5.... MHz \[' && {
-			mode_band="ad"
-			channel=$(iw phy "$dev" info | grep '\* 5.... MHz \[' | grep '(disabled)' -v -m 1 | sed 's/[^[]*\[\|\|\].*//g')
-			iw phy "$dev" info | grep -q 'Capabilities:' && htmode="HT20"
-		}
-
-		[ -n "$htmode" ] && ht_capab="set wireless.radio${devidx}.htmode=$htmode"
+		get_band_defaults "$dev"
 
 		path="$(mac80211_phy_to_path "$dev")"
 		if [ -n "$path" ]; then
@@ -106,10 +171,10 @@ detect_mac80211() {
 		uci -q batch <<-EOF
 			set wireless.radio${devidx}=wifi-device
 			set wireless.radio${devidx}.type=mac80211
-			set wireless.radio${devidx}.channel=${channel}
-			set wireless.radio${devidx}.hwmode=11${mode_band}
 			${dev_id}
-			${ht_capab}
+			set wireless.radio${devidx}.channel=${channel}
+			set wireless.radio${devidx}.band=${mode_band}
+			set wireless.radio${devidx}.htmode=$htmode
 			set wireless.radio${devidx}.disabled=1
 
 			set wireless.default_radio${devidx}=wifi-iface

package/kernel/mac80211/patches/ath/404-regd_no_assoc_hints.patch

@@ -1,6 +1,6 @@
 --- a/net/wireless/reg.c
 +++ b/net/wireless/reg.c
-@@ -3252,6 +3252,8 @@ void regulatory_hint_country_ie(struct w
+@@ -3263,6 +3263,8 @@ void regulatory_hint_country_ie(struct w
  	enum environment_cap env = ENVIRON_ANY;
  	struct regulatory_request *request = NULL, *lr;
  
@@ -9,7 +9,7 @@
  	/* IE len must be evenly divisible by 2 */
  	if (country_ie_len & 0x01)
  		return;
-@@ -3503,6 +3505,7 @@ static bool is_wiphy_all_set_reg_flag(en
+@@ -3514,6 +3516,7 @@ static bool is_wiphy_all_set_reg_flag(en
  
  void regulatory_hint_disconnect(void)
  {

package/kernel/mac80211/patches/ath/542-ath9k_debugfs_diag.patch

@@ -125,9 +125,9 @@
  		REG_SET_BIT(ah, AR_BTCOEX_WL_LNADIV, AR_BTCOEX_WL_LNADIV_FORCE_ON);
 --- a/drivers/net/wireless/ath/ath9k/main.c
 +++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -536,6 +536,11 @@ irqreturn_t ath_isr(int irq, void *dev)
- 	if (test_bit(ATH_OP_HW_RESET, &common->op_flags))
+@@ -538,6 +538,11 @@ irqreturn_t ath_isr(int irq, void *dev)
  		return IRQ_HANDLED;
+ 	}
  
 +	if (test_bit(ATH_DIAG_TRIGGER_ERROR, &ah->diag)) {
 +		status |= ATH9K_INT_FATAL;

package/kernel/mac80211/patches/ath/551-ath9k_ubnt_uap_plus_hsr.patch

@@ -339,7 +339,7 @@
  
  static void ath9k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
  			u32 queues, bool drop);
-@@ -657,6 +658,7 @@ void ath_reset_work(struct work_struct *
+@@ -659,6 +660,7 @@ void ath_reset_work(struct work_struct *
  static int ath9k_start(struct ieee80211_hw *hw)
  {
  	struct ath_softc *sc = hw->priv;
@@ -347,7 +347,7 @@
  	struct ath_hw *ah = sc->sc_ah;
  	struct ath_common *common = ath9k_hw_common(ah);
  	struct ieee80211_channel *curchan = sc->cur_chan->chandef.chan;
-@@ -735,6 +737,11 @@ static int ath9k_start(struct ieee80211_
+@@ -737,6 +739,11 @@ static int ath9k_start(struct ieee80211_
  					  AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
  	}
  

package/kernel/mac80211/patches/ath/921-ath10k_init_devices_synchronously.patch

@@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
 
 --- a/drivers/net/wireless/ath/ath10k/core.c
 +++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -3189,6 +3189,16 @@ int ath10k_core_register(struct ath10k *
+@@ -3206,6 +3206,16 @@ int ath10k_core_register(struct ath10k *
  
  	queue_work(ar->workqueue, &ar->register_work);
  

package/kernel/mac80211/patches/ath/930-ath10k_add_tpt_led_trigger.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -9709,6 +9709,21 @@ static int ath10k_mac_init_rd(struct ath
+@@ -9752,6 +9752,21 @@ static int ath10k_mac_init_rd(struct ath
  	return 0;
  }
  
@@ -22,7 +22,7 @@
  int ath10k_mac_register(struct ath10k *ar)
  {
  	static const u32 cipher_suites[] = {
-@@ -10058,6 +10073,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10101,6 +10116,12 @@ int ath10k_mac_register(struct ath10k *a
  
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  

package/kernel/mac80211/patches/ath/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -140,7 +140,7 @@ v13:
  		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
  		.uart_pin = 7,
  		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
-@@ -130,6 +132,7 @@ static const struct ath10k_hw_params ath
+@@ -132,6 +134,7 @@ static const struct ath10k_hw_params ath
  		.dev_id = QCA9887_1_0_DEVICE_ID,
  		.bus = ATH10K_BUS_PCI,
  		.name = "qca9887 hw1.0",
@@ -148,7 +148,7 @@ v13:
  		.patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
  		.uart_pin = 7,
  		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
-@@ -335,6 +338,7 @@ static const struct ath10k_hw_params ath
+@@ -343,6 +346,7 @@ static const struct ath10k_hw_params ath
  		.dev_id = QCA99X0_2_0_DEVICE_ID,
  		.bus = ATH10K_BUS_PCI,
  		.name = "qca99x0 hw2.0",
@@ -156,7 +156,7 @@ v13:
  		.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
  		.uart_pin = 7,
  		.otp_exe_param = 0x00000700,
-@@ -375,6 +379,7 @@ static const struct ath10k_hw_params ath
+@@ -384,6 +388,7 @@ static const struct ath10k_hw_params ath
  		.dev_id = QCA9984_1_0_DEVICE_ID,
  		.bus = ATH10K_BUS_PCI,
  		.name = "qca9984/qca9994 hw1.0",
@@ -164,7 +164,7 @@ v13:
  		.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
  		.uart_pin = 7,
  		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
-@@ -422,6 +427,7 @@ static const struct ath10k_hw_params ath
+@@ -432,6 +437,7 @@ static const struct ath10k_hw_params ath
  		.dev_id = QCA9888_2_0_DEVICE_ID,
  		.bus = ATH10K_BUS_PCI,
  		.name = "qca9888 hw2.0",
@@ -172,7 +172,7 @@ v13:
  		.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
  		.uart_pin = 7,
  		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
-@@ -2904,6 +2910,10 @@ int ath10k_core_start(struct ath10k *ar,
+@@ -2921,6 +2927,10 @@ int ath10k_core_start(struct ath10k *ar,
  		goto err_hif_stop;
  	}
  
@@ -183,7 +183,7 @@ v13:
  	return 0;
  
  err_hif_stop:
-@@ -3162,9 +3172,18 @@ static void ath10k_core_register_work(st
+@@ -3179,9 +3189,18 @@ static void ath10k_core_register_work(st
  		goto err_spectral_destroy;
  	}
  
@@ -202,7 +202,7 @@ v13:
  err_spectral_destroy:
  	ath10k_spectral_destroy(ar);
  err_debug_destroy:
-@@ -3210,6 +3229,8 @@ void ath10k_core_unregister(struct ath10
+@@ -3227,6 +3246,8 @@ void ath10k_core_unregister(struct ath10
  	if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
  		return;
  
@@ -467,7 +467,7 @@ v13:
  static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
 --- a/drivers/net/wireless/ath/ath10k/wmi.c
 +++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -7468,6 +7468,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
+@@ -7472,6 +7472,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
  	return skb;
  }
  
@@ -517,7 +517,7 @@ v13:
  static struct sk_buff *
  ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
  			     enum wmi_sta_ps_mode psmode)
-@@ -9156,6 +9199,9 @@ static const struct wmi_ops wmi_ops = {
+@@ -9160,6 +9203,9 @@ static const struct wmi_ops wmi_ops = {
  	.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
  	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
  	.gen_echo = ath10k_wmi_op_gen_echo,
@@ -527,7 +527,7 @@ v13:
  	/* .gen_bcn_tmpl not implemented */
  	/* .gen_prb_tmpl not implemented */
  	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9226,6 +9272,8 @@ static const struct wmi_ops wmi_10_1_ops
+@@ -9230,6 +9276,8 @@ static const struct wmi_ops wmi_10_1_ops
  	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
  	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
  	.gen_echo = ath10k_wmi_op_gen_echo,
@@ -536,7 +536,7 @@ v13:
  	/* .gen_bcn_tmpl not implemented */
  	/* .gen_prb_tmpl not implemented */
  	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9298,6 +9346,8 @@ static const struct wmi_ops wmi_10_2_ops
+@@ -9302,6 +9350,8 @@ static const struct wmi_ops wmi_10_2_ops
  	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
  	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
  	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
@@ -545,7 +545,7 @@ v13:
  	/* .gen_pdev_enable_adaptive_cca not implemented */
  };
  
-@@ -9369,6 +9419,8 @@ static const struct wmi_ops wmi_10_2_4_o
+@@ -9373,6 +9423,8 @@ static const struct wmi_ops wmi_10_2_4_o
  		ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
  	.get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
  	.gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing,
@@ -554,7 +554,7 @@ v13:
  	/* .gen_bcn_tmpl not implemented */
  	/* .gen_prb_tmpl not implemented */
  	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9450,6 +9502,8 @@ static const struct wmi_ops wmi_10_4_ops
+@@ -9454,6 +9506,8 @@ static const struct wmi_ops wmi_10_4_ops
  	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
  	.gen_echo = ath10k_wmi_op_gen_echo,
  	.gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
@@ -565,7 +565,7 @@ v13:
  int ath10k_wmi_attach(struct ath10k *ar)
 --- a/drivers/net/wireless/ath/ath10k/wmi.h
 +++ b/drivers/net/wireless/ath/ath10k/wmi.h
-@@ -3027,6 +3027,41 @@ enum wmi_10_4_feature_mask {
+@@ -3030,6 +3030,41 @@ enum wmi_10_4_feature_mask {
  
  };
  

package/kernel/mac80211/patches/ath/975-ath10k-use-tpt-trigger-by-default.patch

@@ -42,7 +42,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	if (ret)
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -10075,7 +10075,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10118,7 +10118,7 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  
  #ifdef CPTCFG_MAC80211_LEDS

package/kernel/mac80211/patches/ath/980-ath10k-fix-max-antenna-gain-unit.patch

@@ -1,49 +0,0 @@
-From: Sven Eckelmann <seckelmann@datto.com>
-Date: Tue, 11 Jun 2019 13:58:35 +0200
-Subject: ath10k: fix max antenna gain unit
-
-Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB
-steps). This isn't the case for max_antenna_gain - which is still expected
-by the firmware as dB.
-
-The firmware is converting it from dB to the internal (twicepower)
-representation when it calculates the limits of a channel. This can be seen
-in tpc_stats when configuring "12" as max_antenna_gain. Instead of the
-expected 12 (6 dB), the tpc_stats shows 24 (12 dB).
-
-Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057.
-
-Fixes: 02256930d9b8 ("ath10k: use proper tx power unit")
-Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
-
-Forwarded: https://patchwork.kernel.org/patch/10986723/
-
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -1038,7 +1038,7 @@ static int ath10k_monitor_vdev_start(str
- 	arg.channel.min_power = 0;
- 	arg.channel.max_power = channel->max_power * 2;
- 	arg.channel.max_reg_power = channel->max_reg_power * 2;
--	arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
-+	arg.channel.max_antenna_gain = channel->max_antenna_gain;
- 
- 	reinit_completion(&ar->vdev_setup_done);
- 	reinit_completion(&ar->vdev_delete_done);
-@@ -1484,7 +1484,7 @@ static int ath10k_vdev_start_restart(str
- 	arg.channel.min_power = 0;
- 	arg.channel.max_power = chandef->chan->max_power * 2;
- 	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
--	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;
-+	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain;
- 
- 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
- 		arg.ssid = arvif->u.ap.ssid;
-@@ -3255,7 +3255,7 @@ static int ath10k_update_channel_list(st
- 			ch->min_power = 0;
- 			ch->max_power = channel->max_power * 2;
- 			ch->max_reg_power = channel->max_reg_power * 2;
--			ch->max_antenna_gain = channel->max_antenna_gain * 2;
-+			ch->max_antenna_gain = channel->max_antenna_gain;
- 			ch->reg_class_id = 0; /* FIXME */
- 
- 			/* FIXME: why use only legacy modes, why not any

package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch

@@ -28,7 +28,7 @@ Forwarded: no
 
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -1006,6 +1006,40 @@ static inline int ath10k_vdev_setup_sync
+@@ -1017,6 +1017,40 @@ static inline int ath10k_vdev_setup_sync
  	return ar->last_wmi_vdev_start_status;
  }
  
@@ -69,7 +69,7 @@ Forwarded: no
  static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
  {
  	struct cfg80211_chan_def *chandef = NULL;
-@@ -1038,7 +1072,8 @@ static int ath10k_monitor_vdev_start(str
+@@ -1049,7 +1083,8 @@ static int ath10k_monitor_vdev_start(str
  	arg.channel.min_power = 0;
  	arg.channel.max_power = channel->max_power * 2;
  	arg.channel.max_reg_power = channel->max_reg_power * 2;
@@ -79,7 +79,7 @@ Forwarded: no
  
  	reinit_completion(&ar->vdev_setup_done);
  	reinit_completion(&ar->vdev_delete_done);
-@@ -1484,7 +1519,8 @@ static int ath10k_vdev_start_restart(str
+@@ -1495,7 +1530,8 @@ static int ath10k_vdev_start_restart(str
  	arg.channel.min_power = 0;
  	arg.channel.max_power = chandef->chan->max_power * 2;
  	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
@@ -89,7 +89,7 @@ Forwarded: no
  
  	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
  		arg.ssid = arvif->u.ap.ssid;
-@@ -3255,7 +3291,8 @@ static int ath10k_update_channel_list(st
+@@ -3266,7 +3302,8 @@ static int ath10k_update_channel_list(st
  			ch->min_power = 0;
  			ch->max_power = channel->max_power * 2;
  			ch->max_reg_power = channel->max_reg_power * 2;

package/kernel/mac80211/patches/ath/990-ath10k-small-buffers.patch

@@ -0,0 +1,64 @@
+--- a/drivers/net/wireless/ath/ath10k/htt.h
++++ b/drivers/net/wireless/ath/ath10k/htt.h
+@@ -236,7 +236,11 @@ enum htt_rx_ring_flags {
+ };
+ 
+ #define HTT_RX_RING_SIZE_MIN 128
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ #define HTT_RX_RING_SIZE_MAX 2048
++#else
++#define HTT_RX_RING_SIZE_MAX 512
++#endif
+ #define HTT_RX_RING_SIZE HTT_RX_RING_SIZE_MAX
+ #define HTT_RX_RING_FILL_LEVEL (((HTT_RX_RING_SIZE) / 2) - 1)
+ #define HTT_RX_RING_FILL_LEVEL_DUAL_MAC (HTT_RX_RING_SIZE - 1)
+--- a/drivers/net/wireless/ath/ath10k/pci.c
++++ b/drivers/net/wireless/ath/ath10k/pci.c
+@@ -131,7 +131,11 @@ static const struct ce_attr pci_host_ce_
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 2048,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 512,
++#else
++		.dest_nentries = 128,
++#endif
+ 		.recv_cb = ath10k_pci_htt_htc_rx_cb,
+ 	},
+ 
+@@ -140,7 +144,11 @@ static const struct ce_attr pci_host_ce_
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 2048,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 128,
++#else
++		.dest_nentries = 64,
++#endif
+ 		.recv_cb = ath10k_pci_htc_rx_cb,
+ 	},
+ 
+@@ -167,7 +175,11 @@ static const struct ce_attr pci_host_ce_
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 512,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 512,
++#else
++		.dest_nentries = 128,
++#endif
+ 		.recv_cb = ath10k_pci_htt_rx_cb,
+ 	},
+ 
+@@ -192,7 +204,11 @@ static const struct ce_attr pci_host_ce_
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 2048,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 128,
++#else
++		.dest_nentries = 96,
++#endif
+ 		.recv_cb = ath10k_pci_pktlog_rx_cb,
+ 	},
+ 

package/kernel/mac80211/patches/brcm/860-brcmfmac-register-wiphy-s-during-module_init.patch

@@ -13,7 +13,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
-@@ -431,6 +431,7 @@ struct brcmf_fw {
+@@ -433,6 +433,7 @@ struct brcmf_fw {
  	struct brcmf_fw_request *req;
  	u32 curpos;
  	void (*done)(struct device *dev, int err, struct brcmf_fw_request *req);
@@ -21,7 +21,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  };
  
  static void brcmf_fw_request_done(const struct firmware *fw, void *ctx);
-@@ -638,6 +639,8 @@ static void brcmf_fw_request_done(const
+@@ -640,6 +641,8 @@ static void brcmf_fw_request_done(const
  		fwctx->req = NULL;
  	}
  	fwctx->done(fwctx->dev, ret, fwctx->req);
@@ -30,7 +30,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  	kfree(fwctx);
  }
  
-@@ -662,6 +665,8 @@ int brcmf_fw_get_firmwares(struct device
+@@ -664,6 +667,8 @@ int brcmf_fw_get_firmwares(struct device
  {
  	struct brcmf_fw_item *first = &req->items[0];
  	struct brcmf_fw *fwctx;
@@ -39,7 +39,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  	int ret;
  
  	brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev));
-@@ -678,6 +683,9 @@ int brcmf_fw_get_firmwares(struct device
+@@ -680,6 +685,9 @@ int brcmf_fw_get_firmwares(struct device
  	fwctx->dev = dev;
  	fwctx->req = req;
  	fwctx->done = fw_cb;
@@ -49,7 +49,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  
  	ret = request_firmware_nowait(THIS_MODULE, true, first->path,
  				      fwctx->dev, GFP_KERNEL, fwctx,
-@@ -685,6 +693,12 @@ int brcmf_fw_get_firmwares(struct device
+@@ -687,6 +695,12 @@ int brcmf_fw_get_firmwares(struct device
  	if (ret < 0)
  		brcmf_fw_request_done(NULL, fwctx);
  

package/kernel/mac80211/patches/brcm/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch

@@ -10,7 +10,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -715,8 +715,36 @@ static struct wireless_dev *brcmf_cfg802
+@@ -718,8 +718,36 @@ static struct wireless_dev *brcmf_cfg802
  	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
  	struct brcmf_pub *drvr = cfg->pub;
  	struct wireless_dev *wdev;

package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch

@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2961,6 +2961,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
+@@ -2964,6 +2964,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
  	 * preference in cfg struct to apply this to
  	 * FW later while initializing the dongle
  	 */

package/kernel/mac80211/patches/brcm/998-survey.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2913,6 +2913,63 @@ done:
+@@ -2916,6 +2916,63 @@ done:
  }
  
  static int
@@ -64,7 +64,7 @@
  brcmf_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *ndev,
  			    int idx, u8 *mac, struct station_info *sinfo)
  {
-@@ -3008,6 +3065,7 @@ static s32 brcmf_inform_single_bss(struc
+@@ -3011,6 +3068,7 @@ static s32 brcmf_inform_single_bss(struc
  	struct brcmu_chan ch;
  	u16 channel;
  	u32 freq;
@@ -72,7 +72,7 @@
  	u16 notify_capability;
  	u16 notify_interval;
  	u8 *notify_ie;
-@@ -3032,6 +3090,17 @@ static s32 brcmf_inform_single_bss(struc
+@@ -3035,6 +3093,17 @@ static s32 brcmf_inform_single_bss(struc
  		band = NL80211_BAND_5GHZ;
  
  	freq = ieee80211_channel_to_frequency(channel, band);
@@ -90,7 +90,7 @@
  	bss_data.chan = ieee80211_get_channel(wiphy, freq);
  	bss_data.scan_width = NL80211_BSS_CHAN_WIDTH_20;
  	bss_data.boottime_ns = ktime_to_ns(ktime_get_boottime());
-@@ -5518,6 +5587,7 @@ static struct cfg80211_ops brcmf_cfg8021
+@@ -5521,6 +5590,7 @@ static struct cfg80211_ops brcmf_cfg8021
  	.leave_ibss = brcmf_cfg80211_leave_ibss,
  	.get_station = brcmf_cfg80211_get_station,
  	.dump_station = brcmf_cfg80211_dump_station,
@@ -100,7 +100,7 @@
  	.add_key = brcmf_cfg80211_add_key,
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1356,6 +1356,8 @@ int brcmf_attach(struct device *dev)
+@@ -1357,6 +1357,8 @@ int brcmf_attach(struct device *dev)
  
  	/* Link to bus module */
  	drvr->hdrlen = 0;
@@ -109,7 +109,7 @@
  
  	/* Attach and link in the protocol */
  	ret = brcmf_proto_attach(drvr);
-@@ -1438,6 +1440,12 @@ void brcmf_detach(struct device *dev)
+@@ -1439,6 +1441,12 @@ void brcmf_detach(struct device *dev)
  	if (drvr == NULL)
  		return;
  

package/kernel/mac80211/patches/rt2x00/002-rt2x00-define-RF5592-in-init_eeprom-routine.patch

@@ -40,7 +40,7 @@ Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
 
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9416,6 +9416,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9442,6 +9442,8 @@ static int rt2800_init_eeprom(struct rt2
  		rf = RF3853;
  	else if (rt2x00_rt(rt2x00dev, RT5350))
  		rf = RF5350;

package/kernel/mac80211/patches/rt2x00/610-rt2x00-change-led-polarity-from-OF.patch

@@ -8,7 +8,7 @@
  
  #include "rt2x00.h"
  #include "rt2800lib.h"
-@@ -9530,6 +9531,17 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9556,6 +9557,17 @@ static int rt2800_init_eeprom(struct rt2
  	rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
  	rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
  

package/kernel/mac80211/patches/rt2x00/650-rt2x00-add-support-for-external-PA-on-MT7620.patch

@@ -30,8 +30,8 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
   * EEPROM LNA
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4356,6 +4356,45 @@ static void rt2800_config_channel(struct
- 		rt2800_iq_calibrate(rt2x00dev, rf->channel);
+@@ -4360,6 +4360,45 @@ static void rt2800_config_channel(struct
+ 			rt2800_iq_calibrate(rt2x00dev, rf->channel);
  	}
  
 +	if (rt2x00_rt(rt2x00dev, RT6352)) {
@@ -76,7 +76,7 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
  	bbp = rt2800_bbp_read(rt2x00dev, 4);
  	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
  	rt2800_bbp_write(rt2x00dev, 4, bbp);
-@@ -9559,7 +9598,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9585,7 +9624,8 @@ static int rt2800_init_eeprom(struct rt2
  	 */
  	eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
  
@@ -86,7 +86,7 @@ Signed-off-by: Tomislav Po=C5=BEega <pozega.tomislav@gmail.com>
  		if (rt2x00_get_field16(eeprom,
  		    EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352))
  		    __set_bit(CAPABILITY_EXTERNAL_PA_TX0,
-@@ -9570,6 +9610,18 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9596,6 +9636,18 @@ static int rt2800_init_eeprom(struct rt2
  			      &rt2x00dev->cap_flags);
  	}
  

package/kernel/mac80211/patches/rt2x00/982-rt2x00-add-rf-self-txdc-calibration.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8419,6 +8419,56 @@ static void rt2800_init_rfcsr_5592(struc
+@@ -8445,6 +8445,56 @@ static void rt2800_init_rfcsr_5592(struc
  	rt2800_led_open_drain_enable(rt2x00dev);
  }
  
@@ -57,7 +57,7 @@
  static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
  				       bool set_bw, bool is_ht40)
  {
-@@ -9026,6 +9076,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9052,6 +9102,7 @@ static void rt2800_init_rfcsr_6352(struc
  	rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
  	rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
  

package/kernel/mac80211/patches/rt2x00/983-rt2x00-add-r-calibration.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8469,6 +8469,155 @@ static void rt2800_rf_self_txdc_cal(stru
+@@ -8495,6 +8495,155 @@ static void rt2800_rf_self_txdc_cal(stru
  	rt2x00_info(rt2x00dev, "RF Tx self calibration end\n");
  }
  
@@ -156,7 +156,7 @@
  static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
  				       bool set_bw, bool is_ht40)
  {
-@@ -9076,6 +9225,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9102,6 +9251,7 @@ static void rt2800_init_rfcsr_6352(struc
  	rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
  	rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);