OpenWrt v22.03.5: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

.github/labeler.yml

@@ -0,0 +1,103 @@
+# target/*
+"target/airoha":
+  - "target/linux/airoha/**"
+"target/apm821xx":
+  - "target/linux/apm821xx/**"
+"target/archs38":
+  - "target/linux/archs38/**"
+"target/armvirt":
+  - "target/linux/armvirt/**"
+"target/at91":
+  - "target/linux/at91/**"
+"target/ath25":
+  - "target/linux/ath25/**"
+"target/ath79":
+  - "target/linux/ath79/**"
+"target/bcm27xx":
+  - "target/linux/bcm27xx/**"
+"target/bcm47xx":
+  - "target/linux/bcm47xx/**"
+"target/bcm4908":
+  - "target/linux/bcm4908/**"
+"target/bcm53xx":
+  - "target/linux/bcm53xx/**"
+"target/bcm63xx":
+  - "target/linux/bcm63xx/**"
+"target/bmips":
+  - "target/linux/bmips/**"
+"target/gemini":
+  - "target/linux/gemini/**"
+"target/imx":
+  - "target/linux/imx/**"
+"target/ipq40xx":
+  - "target/linux/ipq40xx/**"
+"target/ipq806x":
+  - "target/linux/ipq806x/**"
+"target/kirkwood":
+  - "target/linux/kirkwood/**"
+"target/lantiq":
+  - "target/linux/lantiq/**"
+"target/layerscape":
+  - "target/linux/layerscape/**"
+"target/malta":
+  - "target/linux/malta/**"
+"target/mediatek":
+  - "target/linux/mediatek/**"
+"target/mpc85xx":
+  - "target/linux/mpc85xx/**"
+"target/mvebu":
+  - "target/linux/mvebu/**"
+"target/mxs":
+  - "target/linux/mxs/**"
+"target/octeon":
+  - "target/linux/octeon/**"
+"target/octeontx":
+  - "target/linux/octeontx/**"
+"target/omap":
+  - "target/linux/omap/**"
+"target/oxnas":
+  - "target/linux/oxnas/**"
+"target/pistachio":
+  - "target/linux/pistachio/**"
+"target/qoriq":
+  - "target/linux/qoriq/**"
+"target/ramips":
+  - "target/linux/ramips/**"
+"target/realtek":
+  - "target/linux/realtek/**"
+"target/rockchip":
+  - "target/linux/rockchip/**"
+"target/sunxi":
+  - "target/linux/sunxi/**"
+"target/tegra":
+  - "target/linux/tegra/**"
+"target/uml":
+  - "target/linux/uml/**"
+"target/x86":
+  - "target/linux/x86/**"
+"target/zynq":
+  - "target/linux/zynq/**"
+# target/imagebuilder
+"target/imagebuilder":
+  - "target/imagebuilder/**"
+# kernel
+"kernel":
+  - "target/linux/generic/**"
+  - "target/linux/**/config-*"
+  - "target/linux/**/patches-*"
+  - "target/linux/**/files/**"
+  - "package/kernel/linux/**"
+# core packages
+"core packages":
+  - "package/**"
+# build/scripts/tools
+"build/scripts/tools":
+  - "include/**"
+  - "scripts/**"
+  - "tools/**"
+# toolchain
+"toolchain":
+  - "toolchain/**"
+# GitHub/CI
+"GitHub/CI":
+  - ".github/**"

.github/workflows/Dockerfile.tools

@@ -0,0 +1,3 @@
+FROM registry.gitlab.com/openwrt/buildbot/buildworker-3.4.1
+
+COPY --chown=buildbot:buildbot tools.tar /tools.tar

.github/workflows/build.yml

@@ -0,0 +1,361 @@
+name: Build sub target
+
+on:
+  workflow_call:
+    inputs:
+      target:
+        required: true
+        type: string
+      testing:
+        type: boolean
+      build_toolchain:
+        type: boolean
+      include_feeds:
+        type: boolean
+      build_full:
+        type: boolean
+      build_all_modules:
+        type: boolean
+      build_all_kmods:
+        type: boolean
+      build_all_boards:
+        type: boolean
+
+permissions:
+  contents: read
+
+jobs:
+  setup_build:
+    name: Setup build
+    runs-on: ubuntu-latest
+    outputs:
+      owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
+      ccache_hash: ${{ steps.ccache_hash.outputs.ccache_hash }}
+      container_tag: ${{ steps.determine_tools_container.outputs.container_tag }}
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Set lower case owner name
+        id: lower_owner
+        run: |
+          OWNER_LC=$(echo "${{ github.repository_owner }}" \
+            | tr '[:upper:]' '[:lower:]')
+          echo "owner_lc=$OWNER_LC" >> $GITHUB_OUTPUT
+
+      - name: Generate ccache hash
+        id: ccache_hash
+        run: |
+          CCACHE_HASH=$(md5sum include/kernel-* | awk '{ print $1 }' \
+           | md5sum | awk '{ print $1 }')
+          echo "ccache_hash=$CCACHE_HASH" >> $GITHUB_OUTPUT
+
+      # Per branch tools container tag
+      # By default stick to latest
+      # For official test targetting openwrt stable branch
+      # Get the branch or parse the tag and push dedicated tools containers
+      # For local test to use the correct container for stable release testing
+      # you need to use for the branch name a prefix of openwrt-[0-9][0-9].[0-9][0-9]-
+      - name: Determine tools container tag
+        id: determine_tools_container
+        run: |
+          CONTAINER_TAG=latest
+          if [ -n "${{ github.base_ref }}" ]; then
+            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG="${{ github.base_ref }}"
+            fi
+          elif [ ${{ github.ref_type }} == "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG=${{ github.ref_name }}
+            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
+              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\)-.*/\1/')"
+            fi
+          elif [ ${{ github.ref_type }} == "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/^v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+          echo "Tools container to use tools:$CONTAINER_TAG"
+          echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
+
+  build:
+    name: Build with external toolchain
+    needs: setup_build
+    runs-on: ubuntu-latest
+
+    container: ghcr.io/${{ needs.setup_build.outputs.owner_lc }}/tools:${{ needs.setup_build.outputs.container_tag }}
+
+    permissions:
+      contents: read
+      packages: read
+
+    steps:
+      - name: Checkout master directory
+        uses: actions/checkout@v3
+        with:
+          path: openwrt
+
+      - name: Checkout packages feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/packages
+          path: openwrt/feeds/packages
+
+      - name: Checkout luci feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/luci
+          path: openwrt/feeds/luci
+
+      - name: Checkout routing feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/routing
+          path: openwrt/feeds/routing
+
+      - name: Checkout telephony feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/telephony
+          path: openwrt/feeds/telephony
+
+      - name: Fix permission
+        run: |
+          chown -R buildbot:buildbot openwrt
+
+      - name: Initialization environment
+        run: |
+          TARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 1)
+          SUBTARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 2)
+          echo "TARGET=$TARGET" >> "$GITHUB_ENV"
+          echo "SUBTARGET=$SUBTARGET" >> "$GITHUB_ENV"
+
+      - name: Update & Install feeds
+        if: inputs.include_feeds == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          ./scripts/feeds update -a
+          ./scripts/feeds install -a
+
+      - name: Parse toolchain file
+        if: inputs.build_toolchain == false
+        id: parse-toolchain
+        working-directory: openwrt
+        run: |
+          TOOLCHAIN_PATH=snapshots
+
+          if [ -n "${{ github.base_ref }}" ]; then
+            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              major_ver="$(echo ${{ github.base_ref }} | sed 's/^openwrt-/v/')"
+            fi
+          elif [ "${{ github.ref_type }}" = "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              major_ver="$(echo ${{ github.ref_name }} | sed 's/^openwrt-/v/')"
+            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
+              major_ver="$(echo ${{ github.ref_name }} | sed 's/^openwrt-\([0-9][0-9]\.[0-9][0-9]\)-.*/v\1/')"
+            fi
+          elif [ "${{ github.ref_type }}" = "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              major_ver="$(echo ${{ github.ref_name }} | sed 's/^\(v[0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+
+          if [ -n "$major_ver" ]; then
+            git fetch --tags -f
+            latest_tag="$(git tag --sort=-creatordate -l $major_ver* | head -n1)"
+            if [ -n "$latest_tag" ]; then
+              TOOLCHAIN_PATH=releases/$(echo $latest_tag | sed 's/^v//')
+            fi
+          fi
+
+          SUMS_FILE="https://downloads.cdn.openwrt.org/$TOOLCHAIN_PATH/targets/${{ env.TARGET }}/${{ env.SUBTARGET }}/sha256sums"
+          if curl $SUMS_FILE | grep -q ".*openwrt-toolchain.*tar.xz"; then
+            TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-toolchain.*tar.xz")"
+            TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-toolchain.*\).tar.xz/\1/p')
+            TOOLCHAIN_SHA256=$(echo "$TOOLCHAIN_STRING" | cut -d ' ' -f 1)
+            
+            echo "toolchain-type=external_toolchain" >> $GITHUB_OUTPUT
+          elif curl $SUMS_FILE | grep -q ".*openwrt-sdk.*tar.xz"; then
+            TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-sdk.*tar.xz")"
+            TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-sdk.*\).tar.xz/\1/p')
+            TOOLCHAIN_SHA256=$(echo "$TOOLCHAIN_STRING" | cut -d ' ' -f 1)
+
+            echo "toolchain-type=external_sdk" >> $GITHUB_OUTPUT
+          fi
+
+          echo "TOOLCHAIN_FILE=$TOOLCHAIN_FILE" >> "$GITHUB_ENV"
+          echo "TOOLCHAIN_SHA256=$TOOLCHAIN_SHA256" >> "$GITHUB_ENV"
+          echo "TOOLCHAIN_PATH=$TOOLCHAIN_PATH" >> "$GITHUB_ENV"
+
+      - name: Cache external toolchain/sdk
+        if: inputs.build_toolchain == false
+        id: cache-external-toolchain
+        uses: actions/cache@v3
+        with:
+          path: openwrt/${{ env.TOOLCHAIN_FILE }}
+          key: ${{ env.TOOLCHAIN_FILE }}-${{ steps.parse-toolchain.outputs.toolchain-type }}-${{ env.TOOLCHAIN_SHA256 }}
+
+      - name: Cache ccache
+        uses: actions/cache@v3
+        with:
+          path: openwrt/.ccache
+          key: ccache-kernel-${{ env.TARGET }}/${{ env.SUBTARGET }}-${{ needs.setup_build.outputs.ccache_hash }}
+          restore-keys: |
+            ccache-kernel-${{ env.TARGET }}/${{ env.SUBTARGET }}-
+
+      - name: Download external toolchain/sdk
+        if: inputs.build_toolchain == false && steps.cache-external-toolchain.outputs.cache-hit != 'true'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          wget -O - https://downloads.cdn.openwrt.org/${{ env.TOOLCHAIN_PATH }}/targets/${{ env.TARGET }}/${{ env.SUBTARGET }}/${{ env.TOOLCHAIN_FILE }}.tar.xz \
+            | tar --xz -xf -
+
+      - name: Extract prebuilt tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: ./scripts/ext-tools.sh --tools /tools.tar
+
+      - name: Configure testing kernel
+        if: inputs.testing == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_TESTING_KERNEL=y >> .config
+
+      - name: Configure all kernel modules
+        if: inputs.build_all_kmods == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_ALL_KMODS=y >> .config
+
+      - name: Configure all modules
+        if: inputs.build_all_modules == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_ALL=y >> .config
+
+      - name: Configure all boards
+        if: inputs.build_all_boards == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_TARGET_MULTI_PROFILE=y >> .config
+          echo CONFIG_TARGET_PER_DEVICE_ROOTFS=y >> .config
+          echo CONFIG_TARGET_ALL_PROFILES=y >> .config
+
+      - name: Configure external toolchain
+        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_toolchain'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          ./scripts/ext-toolchain.sh \
+            --toolchain ${{ env.TOOLCHAIN_FILE }}/toolchain-* \
+            --overwrite-config \
+            --config ${{ env.TARGET }}/${{ env.SUBTARGET }}
+
+      - name: Adapt external sdk to external toolchain format
+        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk' && steps.cache-external-toolchain.outputs.cache-hit != 'true'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          TOOLCHAIN_DIR=${{ env.TOOLCHAIN_FILE }}/staging_dir/$(ls ${{ env.TOOLCHAIN_FILE }}/staging_dir | grep toolchain)
+          TOOLCHAIN_BIN=$TOOLCHAIN_DIR/bin
+          OPENWRT_DIR=$(pwd)
+
+          # Find target name from toolchain info.mk
+          GNU_TARGET_NAME=$(cat $TOOLCHAIN_DIR/info.mk | grep TARGET_CROSS | sed 's/^TARGET_CROSS=\(.*\)-$/\1/')
+
+          cd $TOOLCHAIN_BIN
+
+          # Revert sdk wrapper scripts applied to all the bins
+          for app in $(find . -name "*.bin"); do
+            TARGET_APP=$(echo $app | sed 's/\.\/\.\(.*\)\.bin/\1/')
+            rm $TARGET_APP
+            mv .$TARGET_APP.bin $TARGET_APP
+          done
+
+          # Setup the wrapper script in the sdk toolchain dir simulating an external toolchain build
+          cp $OPENWRT_DIR/target/toolchain/files/wrapper.sh $GNU_TARGET_NAME-wrapper.sh
+          for app in cc gcc g++ c++ cpp ld as ; do
+            [ -f $GNU_TARGET_NAME-$app ] && mv $GNU_TARGET_NAME-$app $GNU_TARGET_NAME-$app.bin
+            ln -sf $GNU_TARGET_NAME-wrapper.sh $GNU_TARGET_NAME-$app
+          done
+
+      - name: Configure external toolchain with sdk
+        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          ./scripts/ext-toolchain.sh \
+            --toolchain ${{ env.TOOLCHAIN_FILE }}/staging_dir/toolchain-* \
+            --overwrite-config \
+            --config ${{ env.TARGET }}/${{ env.SUBTARGET }}
+
+      - name: Configure internal toolchain
+        if: inputs.build_toolchain == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          echo "CONFIG_TARGET_${{ env.TARGET }}=y" >> .config
+          echo "CONFIG_TARGET_${{ env.TARGET }}_${{ env.SUBTARGET }}=y" >> .config
+
+          make defconfig
+
+      - name: Show configuration
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: ./scripts/diffconfig.sh
+
+      - name: Build tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build toolchain
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make toolchain/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build Kernel
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make target/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build Kernel Kmods
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make package/linux/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build everything
+        if: inputs.build_full == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Upload logs
+        if: failure()
+        uses: actions/upload-artifact@v3
+        with:
+          name: ${{ env.TARGET }}-${{ env.SUBTARGET }}-logs
+          path: "openwrt/logs"

.github/workflows/check-kernel-patches.yml

@@ -0,0 +1,131 @@
+name: Refresh kernel for target
+
+on:
+  workflow_call:
+    inputs:
+      target:
+        required: true
+        type: string
+      testing:
+        type: boolean
+
+permissions:
+  contents: read
+
+jobs:
+  setup_build:
+    name: Setup build
+    runs-on: ubuntu-latest
+    outputs:
+      owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
+      container_tag: ${{ steps.determine_tools_container.outputs.container_tag }}
+
+    steps:
+      - name: Set lower case owner name
+        id: lower_owner
+        run: |
+          OWNER_LC=$(echo "${{ github.repository_owner }}" \
+            | tr '[:upper:]' '[:lower:]')
+          echo "owner_lc=$OWNER_LC" >> $GITHUB_OUTPUT
+
+      # Per branch tools container tag
+      # By default stick to latest
+      # For official test targetting openwrt stable branch
+      # Get the branch or parse the tag and push dedicated tools containers
+      # For local test to use the correct container for stable release testing
+      # you need to use for the branch name a prefix of openwrt-[0-9][0-9].[0-9][0-9]-
+      - name: Determine tools container tag
+        id: determine_tools_container
+        run: |
+          CONTAINER_TAG=latest
+          if [ -n "${{ github.base_ref }}" ]; then
+            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG="${{ github.base_ref }}"
+            fi
+          elif [ ${{ github.ref_type }} == "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG=${{ github.ref_name }}
+            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
+              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\)-.*/\1/')"
+            fi
+          elif [ ${{ github.ref_type }} == "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/^v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+          echo "Tools container to use tools:$CONTAINER_TAG"
+          echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
+
+  check-patch:
+    name: Check Kernel patches
+    needs: setup_build
+    runs-on: ubuntu-latest
+
+    container: ghcr.io/${{ needs.setup_build.outputs.owner_lc }}/tools:${{ needs.setup_build.outputs.container_tag }}
+
+    permissions:
+      contents: read
+      packages: read
+
+    steps:
+      - name: Checkout master directory
+        uses: actions/checkout@v3
+        with:
+          path: openwrt
+
+      - name: Fix permission
+        run: |
+          chown -R buildbot:buildbot openwrt
+
+      - name: Initialization environment
+        run: |
+          TARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 1)
+          SUBTARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 2)
+          echo "TARGET=$TARGET" >> "$GITHUB_ENV"
+          echo "SUBTARGET=$SUBTARGET" >> "$GITHUB_ENV"
+
+      - name: Extract prebuilt tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: ./scripts/ext-tools.sh --tools /tools.tar
+
+      - name: Configure testing kernel
+        if: inputs.testing == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_TESTING_KERNEL=y >> .config
+
+      - name: Configure system
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_ALL_KMODS=y >> .config
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          echo "CONFIG_TARGET_${{ env.TARGET }}=y" >> .config
+          echo "CONFIG_TARGET_${{ env.TARGET }}_${{ env.SUBTARGET }}=y" >> .config
+
+          make defconfig
+
+      - name: Build tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make tools/quilt/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Refresh Kernel patches
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          make target/linux/refresh V=s
+
+          . .github/workflows/scripts/ci_helpers.sh
+
+          if git diff --name-only --exit-code; then
+            success "Kernel patches for ${{ env.TARGET }}/${{ env.SUBTARGET }} seems ok"
+          else
+            err "Kernel patches for ${{ env.TARGET }}/${{ env.SUBTARGET }} require refresh. (run 'make target/linux/refresh' and force push this pr)"
+            exit 1
+          fi

.github/workflows/formal.yml

@@ -3,6 +3,9 @@ name: Test Formalities
 on:
   pull_request:
 
+permissions:
+  contents: read
+
 jobs:
   build:
     name: Test Formalities
@@ -11,7 +14,7 @@ jobs:
       fail-fast: false
 
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
         with:
           ref: ${{ github.event.pull_request.head.sha }}
           fetch-depth: 0
@@ -24,7 +27,7 @@ jobs:
 
       - name: Test formalities
         run: |
-          source .github/workflows/ci_helpers.sh
+          source .github/workflows/scripts/ci_helpers.sh
 
           RET=0
           for commit in $(git rev-list HEAD ^origin/$BRANCH); do

.github/workflows/kernel.yml

@@ -0,0 +1,85 @@
+name: Build Kernel
+
+on:
+  pull_request:
+    paths:
+      - '.github/workflows/check-kernel-patches.yml'
+      - '.github/workflows/build.yml'
+      - '.github/workflows/kernel.yml'
+      - 'include/kernel*'
+      - 'package/kernel/**'
+      - 'target/linux/generic/**'
+  push:
+    paths:
+      - '.github/workflows/check-kernel-patches.yml'
+      - '.github/workflows/build.yml'
+      - '.github/workflows/kernel.yml'
+      - 'include/kernel*'
+      - 'package/kernel/**'
+      - 'target/linux/generic/**'
+
+permissions:
+  contents: read
+
+jobs:
+  determine_targets:
+    name: Set targets
+    runs-on: ubuntu-latest
+    outputs:
+      target: ${{ steps.find_targets.outputs.target }}
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Set targets
+        id: find_targets
+        run: |
+          export TARGETS="$(perl ./scripts/dump-target-info.pl targets 2>/dev/null \
+            | sort -u -t '/' -k1,1 \
+            | awk '{ print $1 }')"
+
+          JSON='['
+          FIRST=1
+          for TARGET in $TARGETS; do
+            [[ $FIRST -ne 1 ]] && JSON="$JSON"','
+            JSON="$JSON"'"'"${TARGET}"'"'
+            FIRST=0
+          done
+          JSON="$JSON"']'
+
+           echo -e "\n---- targets ----\n"
+           echo "$JSON"
+           echo -e "\n---- targets ----\n"
+
+           echo "target=$JSON" >> $GITHUB_OUTPUT
+
+  build:
+    name: Build Kernel with external toolchain
+    needs: determine_targets
+    permissions:
+      contents: read
+      packages: read
+    strategy:
+       fail-fast: False
+       matrix:
+         target: ${{fromJson(needs.determine_targets.outputs.target)}}
+    uses: ./.github/workflows/build.yml
+    with:
+      target: ${{ matrix.target }}
+      build_all_kmods: true
+
+  check-kernel-patches:
+    name: Check Kernel patches
+    needs: determine_targets
+    permissions:
+      contents: read
+      packages: read
+    strategy:
+       fail-fast: False
+       matrix:
+         target: ${{fromJson(needs.determine_targets.outputs.target)}}
+    uses: ./.github/workflows/check-kernel-patches.yml
+    with:
+      target: ${{ matrix.target }}
+

.github/workflows/labeler.yml

@@ -0,0 +1,33 @@
+name: 'Pull Request Labeler'
+on:
+  - pull_request_target
+
+permissions:
+  contents: read
+
+jobs:
+  labeler:
+    permissions:
+      contents: read # to determine modified files (actions/labeler)
+      pull-requests: write # to add labels to PRs (actions/labeler)
+
+    name: Pull Request Labeler
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/labeler@v4
+        with:
+          repo-token: '${{ secrets.GITHUB_TOKEN }}'
+
+      - name: Check Branch
+        id: check-branch
+        run: |
+          if echo "${{ github.base_ref }}" | grep -q -E 'openwrt-[0-9][0-9]\.[0-9][0-9]'; then
+              echo "release-tag=$(echo ${{ github.base_ref }} | sed 's/openwrt-/release\//')" >> $GITHUB_OUTPUT
+          fi
+
+      - uses: buildsville/add-remove-label@v2.0.0
+        if: ${{ steps.check-branch.outputs.release-tag }}
+        with:
+          token: ${{secrets.GITHUB_TOKEN}}
+          labels: ${{ steps.check-branch.outputs.release-tag }}
+          type: add

.github/workflows/packages.yml

@@ -0,0 +1,43 @@
+name: Build all core packages
+
+on:
+  pull_request:
+    paths:
+      - '.github/workflows/build.yml'
+      - '.github/workflows/packages.yml'
+      - 'config/**'
+      - 'include/**'
+      - 'package/**'
+      - 'target/linux/generic/**'
+      - 'toolchain/**'
+  push:
+    paths:
+      - '.github/workflows/build.yml'
+      - '.github/workflows/packages.yml'
+      - 'config/**'
+      - 'include/**'
+      - 'package/**'
+      - 'target/linux/generic/**'
+      - 'toolchain/**'
+
+permissions:
+  contents: read
+
+jobs:
+  build:
+    permissions:
+      contents: read
+      packages: read
+    strategy:
+      fail-fast: False
+      matrix:
+        include:
+          - target: malta/be
+          - target: x86/64
+    uses: ./.github/workflows/build.yml
+    with:
+      target: ${{ matrix.target }}
+      build_all_kmods: true
+      build_all_modules: true
+      build_full: true
+

.github/workflows/scripts/show_build_failures.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+original_exit_code="${ret:-1}"
+log_dir_path="${1:-logs}"
+context="${2:-10}"
+
+show_make_build_errors() {
+	grep -slr 'make\[[[:digit:]]\].*Error [[:digit:]]$' "$log_dir_path" | while IFS= read -r log_file; do
+		printf "====== Make errors from %s ======\n" "$log_file";
+		grep -r -C"$context" 'make\[[[:digit:]]\].*Error [[:digit:]]$' "$log_file" ;
+	done
+}
+
+show_make_build_errors
+exit "$original_exit_code"

.github/workflows/tools.yml

@@ -4,33 +4,36 @@ on:
   pull_request:
     paths:
       - 'tools/**'
+      - '.github/workflows/tools.yml'
+  push:
+    paths:
+      - 'tools/**'
+      - '.github/workflows/tools.yml'
+
+permissions:
+  contents: read
 
 jobs:
-  build:
-    name: Build tools on ${{ matrix.os }}
-    runs-on: ${{ matrix.os }}
-    strategy:
-      fail-fast: False
-      matrix:
-        os: 
-          - ubuntu-latest
-          - macos-latest
+  build-macos-latest:
+    if: github.event_name != 'push'
+    runs-on: macos-latest
+
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v3
         with:
-          fetch-depth: 0
           path: openwrt
 
       - name: Setup MacOS
-        if: ${{ matrix.os == 'macos-latest' }}
         run: |
-          echo "WORKPATH=/Volumes/OpenWrt/openwrt/" >> "$GITHUB_ENV"
+          echo "WORKPATH=/Volumes/OpenWrt" >> "$GITHUB_ENV"
           hdiutil create -size 20g -type SPARSE -fs "Case-sensitive HFS+" -volname OpenWrt OpenWrt.sparseimage
           hdiutil attach OpenWrt.sparseimage
           mv "$GITHUB_WORKSPACE/openwrt" /Volumes/OpenWrt/
-          cd "$WORKPATH"
 
+      - name: Install required prereq on MacOS
+        working-directory: ${{ env.WORKPATH }}/openwrt
+        run: |
           brew install \
             autoconf \
             automake \
@@ -70,65 +73,154 @@ jobs:
             echo "/usr/local/opt/make/libexec/gnubin" >> "$GITHUB_PATH"
             echo "/usr/local/opt/make/libexec/gnubin" >> "$GITHUB_PATH"
             echo "/usr/sbin" >> "$GITHUB_PATH"
-            pwd
-
-      - name: Setup Ubuntu
-        if: ${{ matrix.os == 'ubuntu-latest' }}
-        env:
-          DEBIAN_FRONTEND: noninteractive
-        run: |
-          sudo apt-get update
-          sudo apt-get -y install \
-            build-essential \
-            ccache \
-            clang-12 \
-            ecj \
-            fastjar \
-            file \
-            g++ \
-            gawk \
-            gettext \
-            git \
-            java-propose-classpath \
-            libelf-dev \
-            libncurses-dev \
-            libssl-dev \
-            mkisofs \
-            python3 \
-            python3-dev \
-            python3-distutils \
-            python3-setuptools \
-            qemu-utils \
-            rsync \
-            subversion \
-            swig \
-            unzip \
-            wget \
-            xsltproc \
-            zlib1g-dev
-          echo "WORKPATH=$GITHUB_WORKSPACE/openwrt/" >> "$GITHUB_ENV"
-          cd "$WORKPATH"
-          pwd
 
       - name: Make prereq
-        run: |
-          cd "$WORKPATH"
-          pwd
-          make defconfig
+        working-directory: ${{ env.WORKPATH }}/openwrt
+        run: make defconfig
 
-      - name: Build tools
-        run: |
-          cd "$WORKPATH"
-          make tools/install -j$(nproc) BUILD_LOG=1
-
-      - name: Move logs to GITHUB_WORKSPACE
-        if: failure()
-        run: |
-          cp -r "$WORKPATH/logs" "$GITHUB_WORKSPACE"
+      - name: Build tools MacOS
+        working-directory: ${{ env.WORKPATH }}/openwrt
+        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
 
       - name: Upload logs
-        if: failure()
-        uses: actions/upload-artifact@v2
+        if: always()
+        uses: actions/upload-artifact@v3
         with:
-          name: ${{ matrix.os }}-logs
-          path: "logs"
+          name: macos-latest-logs
+          path: ${{ env.WORKPATH }}/openwrt/logs
+
+      - name: Upload config
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: macos-latest-config
+          path: ${{ env.WORKPATH }}/openwrt/.config
+
+  build-linux-buildbot:
+    runs-on: ubuntu-latest
+    container: registry.gitlab.com/openwrt/buildbot/buildworker-3.4.1
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          path: 'openwrt'
+
+      - name: Fix permission
+        run: |
+          chown -R buildbot:buildbot openwrt
+
+      - name: Set configs for tools container
+        if: github.event_name == 'push'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          touch .config
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+      - name: Make prereq
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make defconfig
+
+      - name: Build tools BuildBot Container
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Upload logs
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: linux-buildbot-logs
+          path: openwrt/logs
+
+      - name: Upload config
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: linux-buildbot-config
+          path: openwrt/.config
+
+      - name: Archive prebuilt tools
+        if: github.event_name == 'push'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: tar --mtime=now -cf tools.tar staging_dir/host build_dir/host dl
+
+      - name: Upload prebuilt tools
+        if: github.event_name == 'push'
+        uses: actions/upload-artifact@v3
+        with:
+          name: linux-buildbot-prebuilt-tools
+          path: openwrt/tools.tar
+          retention-days: 1
+
+  push-tools-container:
+    needs: build-linux-buildbot
+    runs-on: ubuntu-latest
+    if: github.event_name == 'push'
+
+    permissions:
+      contents: read
+      packages: write
+
+    steps:
+      - name: Set lower case owner name
+        env:
+          OWNER: ${{ github.repository_owner }}
+        run: |
+          echo "OWNER_LC=${OWNER,,}" >> "$GITHUB_ENV"
+
+      # Per branch tools container tag
+      # By default stick to latest
+      # For official test targetting openwrt stable branch
+      # Get the branch or parse the tag and push dedicated tools containers
+      # Any branch that will match this pattern openwrt-[0-9][0-9].[0-9][0-9]
+      # will refresh the tools container with the matching tag.
+      # (example branch openwrt-22.03 -> tools:openwrt-22.03)
+      # (example branch openwrt-22.03-test -> tools:openwrt-22.03)
+      - name: Determine tools container tag
+        run: |
+          CONTAINER_TAG=latest
+
+          if [ ${{ github.ref_type }} == "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E 'openwrt-[0-9][0-9]\.[0-9][0-9]'; then
+              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\).*/\1/')"
+            fi
+          elif [ ${{ github.ref_type }} == "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E 'v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+
+          echo "Tools container to push tools:$CONTAINER_TAG"
+          echo "CONTAINER_TAG=$CONTAINER_TAG" >> "$GITHUB_ENV"
+
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          path: 'openwrt'
+
+      - name: Download prebuilt tools from build job
+        uses: actions/download-artifact@v3
+        with:
+          name: linux-buildbot-prebuilt-tools
+          path: openwrt
+
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@v2
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build and push
+        uses: docker/build-push-action@v3
+        with:
+          context: openwrt
+          push: true
+          tags: ghcr.io/${{ env.OWNER_LC }}/tools:${{ env.CONTAINER_TAG }}
+          file: openwrt/.github/workflows/Dockerfile.tools

config/Config-images.in

@@ -286,6 +286,7 @@ menu "Target Images"
 	comment "Image Options"
 
 	source "target/linux/*/image/Config.in"
+	source "target/linux/*/*/image/Config.in"
 
 	config TARGET_KERNEL_PARTSIZE
 		int "Kernel partition size (in MiB)"

config/Config-kernel.in

@@ -81,6 +81,11 @@ config KERNEL_PROFILING
 	  Enable the extended profiling support mechanisms used by profilers such
 	  as OProfile.
 
+config KERNEL_RPI_AXIPERF
+	bool "Compile the kernel with RaspberryPi AXI Performance monitors"
+	default y
+	depends on KERNEL_PERF_EVENTS && TARGET_bcm27xx
+
 config KERNEL_UBSAN
 	bool "Compile the kernel with undefined behaviour sanity checker"
 	help

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git-full packages https://git.openwrt.org/feed/packages.git^088222c39da9c20f5c93769d009443d7bbf294c7
-src-git-full luci https://git.openwrt.org/project/luci.git^709d48b72657084a27db1fb6fc0a4a4e8939552f
-src-git-full routing https://git.openwrt.org/feed/routing.git^85028704f688a6768d3f10d5d3c10a799a121e0d
-src-git-full telephony https://git.openwrt.org/feed/telephony.git^1d2031a5c82816483c51bca15649e2957fbe2bc2
+src-git-full packages https://git.openwrt.org/feed/packages.git^d057936acbefd76b033e7c365baa68b48ccb9166
+src-git-full luci https://git.openwrt.org/project/luci.git^0b38d70fbd47b0c702d5001de623213eb301a6fe
+src-git-full routing https://git.openwrt.org/feed/routing.git^1cc7676b9f32acc30ec47f15fcb70380d5d6ef01
+src-git-full telephony https://git.openwrt.org/feed/telephony.git^36d9f2f962bd0aba2eef674eb265819609ea99ed

include/bpf.mk

@@ -63,13 +63,15 @@ BPF_CFLAGS := \
 	-Wno-unused-label \
 	-O2 -emit-llvm -Xclang -disable-llvm-passes
 
-ifeq ($(DUMP),)
+ifneq ($(CONFIG_HAS_BPF_TOOLCHAIN),)
+ifeq ($(DUMP)$(filter download refresh,$(MAKECMDGOALS)),)
   CLANG_VER:=$(shell $(CLANG) -dM -E - < /dev/null | grep __clang_major__ | cut -d' ' -f3)
   CLANG_VER_VALID:=$(shell [ "$(CLANG_VER)" -ge "$(CLANG_MIN_VER)" ] && echo 1 )
   ifeq ($(CLANG_VER_VALID),)
     $(error ERROR: LLVM/clang version too old. Minimum required: $(CLANG_MIN_VER), found: $(CLANG_VER))
   endif
 endif
+endif
 
 define CompileBPF
 	$(CLANG) -g -target $(BPF_ARCH)-linux-gnu $(BPF_CFLAGS) $(2) \

include/depends.mk

@@ -12,6 +12,7 @@
 DEP_FINDPARAMS := -x "*/.svn*" -x ".*" -x "*:*" -x "*\!*" -x "* *" -x "*\\\#*" -x "*/.*_check" -x "*/.*.swp" -x "*/.pkgdir*"
 
 find_md5=find $(wildcard $(1)) -type f $(patsubst -x,-and -not -path,$(DEP_FINDPARAMS) $(2)) -printf "%p%T@\n" | sort | $(MKHASH) md5
+find_md5_reproducible=find $(wildcard $(1)) -type f $(patsubst -x,-and -not -path,$(DEP_FINDPARAMS) $(2)) -print0 | xargs -0 $(MKHASH) md5 | sort | $(MKHASH) md5
 
 define rdep
   .PRECIOUS: $(2)

include/host-build.mk

@@ -21,7 +21,7 @@ include $(INCLUDE_DIR)/depends.mk
 include $(INCLUDE_DIR)/quilt.mk
 
 BUILD_TYPES += host
-HOST_STAMP_PREPARED=$(HOST_BUILD_DIR)/.prepared$(if $(HOST_QUILT)$(DUMP),,$(shell $(call find_md5,${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(HOST_PREPARED_DEPENDS)))
+HOST_STAMP_PREPARED=$(HOST_BUILD_DIR)/.prepared$(if $(HOST_QUILT)$(DUMP),,$(shell $(call $(if $(CONFIG_AUTOREMOVE),find_md5_reproducible,find_md5),${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(HOST_PREPARED_DEPENDS)))
 HOST_STAMP_CONFIGURED:=$(HOST_BUILD_DIR)/.configured
 HOST_STAMP_BUILT:=$(HOST_BUILD_DIR)/.built
 HOST_BUILD_PREFIX?=$(if $(IS_PACKAGE_BUILD),$(STAGING_DIR_HOSTPKG),$(STAGING_DIR_HOST))
@@ -198,8 +198,8 @@ ifndef DUMP
 
     ifneq ($(CONFIG_AUTOREMOVE),)
       host-compile:
-		$(FIND) $(HOST_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' | \
-			$(XARGS) rm -rf
+		$(FIND) $(HOST_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' -print0 | \
+			$(XARGS) -0 rm -rf
     endif
   endef
 endif

include/image.mk

@@ -524,7 +524,8 @@ endif
 define Device/Build/compile
   $$(_COMPILE_TARGET): $(KDIR)/$(1)
   $(eval $(call Device/Export,$(KDIR)/$(1)))
-  $(KDIR)/$(1):
+  $(KDIR)/$(1): FORCE
+	rm -f $(KDIR)/$(1)
 	$$(call concat_cmd,$(COMPILE/$(1)))
 
 endef

include/kernel-5.10

@@ -1,2 +1,2 @@
-LINUX_VERSION-5.10 = .146
-LINUX_KERNEL_HASH-5.10.146 = 7bbd97f3278eadb73c19a1ca8c1a655c60afcee9f487b910063cdd15e9ee6dc1
+LINUX_VERSION-5.10 = .176
+LINUX_KERNEL_HASH-5.10.176 = ce072c60ba04173e05b2a1de3fefdeba5ac8b28b1958d92d21bdbf9b736ef793

include/kernel-build.mk

@@ -10,7 +10,7 @@ ifneq ($(DUMP),1)
 endif
 
 KERNEL_FILE_DEPENDS=$(GENERIC_BACKPORT_DIR) $(GENERIC_PATCH_DIR) $(GENERIC_HACK_DIR) $(PATCH_DIR) $(GENERIC_FILES_DIR) $(FILES_DIR)
-STAMP_PREPARED=$(LINUX_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call find_md5,$(KERNEL_FILE_DEPENDS),)))
+STAMP_PREPARED=$(LINUX_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call $(if $(CONFIG_AUTOREMOVE),find_md5_reproducible,find_md5),$(KERNEL_FILE_DEPENDS),)))
 STAMP_CONFIGURED:=$(LINUX_DIR)/.configured
 include $(INCLUDE_DIR)/download.mk
 include $(INCLUDE_DIR)/quilt.mk

include/kernel.mk

@@ -126,7 +126,7 @@ ifeq ($(call qstrip,$(CONFIG_EXTERNAL_KERNEL_TREE))$(call qstrip,$(CONFIG_KERNEL
 	KERNELRELEASE=$(LINUX_VERSION)
 endif
 
-KERNEL_MAKEOPTS := -C $(LINUX_DIR) $(KERNEL_MAKE_FLAGS)
+KERNEL_MAKEOPTS = -C $(LINUX_DIR) $(KERNEL_MAKE_FLAGS)
 
 ifdef CONFIG_USE_SPARSE
   KERNEL_MAKEOPTS += C=1 CHECK=$(STAGING_DIR_HOST)/bin/sparse

include/package.mk

@@ -85,7 +85,7 @@ ifneq ($(PREV_STAMP_PREPARED),)
   STAMP_PREPARED:=$(PREV_STAMP_PREPARED)
   CONFIG_AUTOREBUILD:=
 else
-  STAMP_PREPARED=$(PKG_BUILD_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call find_md5,${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(PKG_PREPARED_DEPENDS)))
+  STAMP_PREPARED=$(PKG_BUILD_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call $(if $(CONFIG_AUTOREMOVE),find_md5_reproducible,find_md5),${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(PKG_PREPARED_DEPENDS)))
 endif
 STAMP_CONFIGURED=$(PKG_BUILD_DIR)/.configured$(if $(DUMP),,_$(call confvar,$(PKG_CONFIG_DEPENDS)))
 STAMP_CONFIGURED_WILDCARD=$(PKG_BUILD_DIR)/.configured_*
@@ -259,8 +259,8 @@ define Build/CoreTargets
   ifneq ($(CONFIG_AUTOREMOVE),)
     compile:
 		-touch -r $(PKG_BUILD_DIR)/.built $(PKG_BUILD_DIR)/.autoremove 2>/dev/null >/dev/null
-		$(FIND) $(PKG_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' -and -not -name '.pkgdir' | \
-			$(XARGS) rm -rf
+		$(FIND) $(PKG_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' -and -not -name '.pkgdir'  -print0 | \
+			$(XARGS) -0 rm -rf
   endif
 endef
 

include/trusted-firmware-a.mk

@@ -1,5 +1,5 @@
 PKG_NAME ?= trusted-firmware-a
-PKG_CPE_ID ?= cpe:/a:arm:arm_trusted_firmware
+PKG_CPE_ID ?= cpe:/a:arm:trusted_firmware-a
 
 ifndef PKG_SOURCE_PROTO
 PKG_SOURCE = trusted-firmware-a-$(PKG_VERSION).tar.gz

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),22.03.1)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),22.03.5)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r19777-2853b6d652)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r20134-5f15225c1e)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/22.03.1)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/22.03.5)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/base-files/files/bin/config_generate

@@ -96,7 +96,7 @@ generate_network() {
 
 	json_select network
 		json_select "$1"
-			json_get_vars device macaddr protocol ipaddr netmask vlan
+			json_get_vars device macaddr metric protocol ipaddr netmask vlan
 			json_get_values ports ports
 		json_select ..
 	json_select ..
@@ -154,6 +154,7 @@ generate_network() {
 		set network.$1='interface'
 		set network.$1.type='$type'
 		set network.$1.device='$device'
+		set network.$1.metric='$metric'
 		set network.$1.proto='none'
 	EOF
 

package/base-files/files/lib/upgrade/stage2

@@ -41,7 +41,7 @@ switch_to_ramfs() {
 		pivot_root mount_root reboot sync kill sleep		\
 		md5sum hexdump cat zcat dd tar				\
 		ls basename find cp mv rm mkdir rmdir mknod touch chmod \
-		'[' printf wc grep awk sed cut				\
+		'[' printf wc grep awk sed cut tail			\
 		mtd partx losetup mkfs.ext4 nandwrite flash_erase	\
 		ubiupdatevol ubiattach ubiblock ubiformat		\
 		ubidetach ubirsvol ubirmvol ubimkvol			\

package/base-files/image-config.in

@@ -183,7 +183,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/releases/22.03.1"
+		default "https://downloads.openwrt.org/releases/22.03.5"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/uboot-envtools/files/ath79

@@ -80,7 +80,8 @@ buffalo,wzr-hp-ag300h)
 	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
 	;;
 buffalo,wzr-hp-g300nh-rb|\
-buffalo,wzr-hp-g300nh-s)
+buffalo,wzr-hp-g300nh-s|\
+linksys,ea4500-v3)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;
 domywifi,dw33d)
@@ -125,6 +126,10 @@ plasmacloud,pa300e)
 qihoo,c301)
 	ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x10000" "0x10000"
 	;;
+ruckus,zf7321|\
+ruckus,zf7372)
+	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x40000" "0x10000"
+	;;
 sophos,ap55|\
 sophos,ap55c|\
 sophos,ap100|\

package/boot/uboot-envtools/files/ipq40xx

@@ -26,6 +26,7 @@ ubootenv_mtdinfo () {
 	fi
 
 	sectors=$(( $ubootenv_size / $mtd_erase ))
+	sectors=$(printf "0x%x" $sectors )
 	echo /dev/$mtd_dev 0x0 $ubootenv_size $mtd_erase $sectors
 }
 

package/boot/uboot-envtools/files/ipq806x

@@ -26,6 +26,7 @@ ubootenv_mtdinfo () {
 	fi
 
 	sectors=$(( $ubootenv_size / $mtd_erase ))
+	sectors=$(printf "0x%x" $sectors )
 	echo /dev/$mtd_dev 0x0 $ubootenv_size $mtd_erase $sectors
 }
 

package/boot/uboot-envtools/files/mpc85xx

@@ -16,6 +16,9 @@ ocedo,panda)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x20000" "0x20000"
 	;;
+watchguard,firebox-t10)
+	ubootenv_add_uci_config "$(find_mtd_part 'u-boot-env')" "0x0" "0x2000" "0x10000"
+	;;
 aerohive,hiveap-330)
 	ubootenv_add_uci_config "$(find_mtd_part 'u-boot-env')" "0x0" "0x20000" "0x10000"
 	;;

package/boot/uboot-envtools/files/ramips

@@ -47,6 +47,7 @@ ravpower,rp-wd03)
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x4000" "0x1000" "0x1000"
 	;;
+asus,rt-ax53u|\
 jcg,q20|\
 netgear,wax202)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"

package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt

@@ -2,7 +2,7 @@ fdtaddr=0x8f000000
 loadaddr=0x81000000
 fdt_high=0x8fffffff
 initrd_high=0xffffffff
-sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+sd_boot=ext4load mmc 0:1 ${loadaddr} fitImage;bootm ${loadaddr}
 bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
 bootcmd=echo starting openwrt ...;run sd_boot
 bootdelay=3

package/boot/uboot-layerscape/patches/0900-layerscape-adjust-LS1021A-IOT-config-for-OpenWrt.patch

@@ -0,0 +1,45 @@
+From b382eeafe01df21da3518b2f1dd7d22ee114efb0 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Mon, 24 Oct 2022 14:19:38 +0200
+Subject: [PATCH] layerscape: adjust LS1021A-IOT config for OpenWrt
+
+Two configs are required:
+  - FIT
+  - Ext4load
+
+Let's enable it. U-boot is now bigger than 512K. Let's enlarge it to
+768K. Envs start at 1M, so it will fit.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ configs/ls1021aiot_sdcard_defconfig | 3 +++
+ include/configs/ls1021aiot.h        | 4 ++--
+ 2 files changed, 5 insertions(+), 2 deletions(-)
+
+--- a/configs/ls1021aiot_sdcard_defconfig
++++ b/configs/ls1021aiot_sdcard_defconfig
+@@ -27,8 +27,11 @@ CONFIG_CMD_MII=y
+ # CONFIG_CMD_MDIO is not set
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_EXT2=y
++CONFIG_CMD_EXT4=y
+ CONFIG_CMD_FAT=y
+ # CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
+ CONFIG_OF_CONTROL=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_IS_IN_MMC=y
+--- a/include/configs/ls1021aiot.h
++++ b/include/configs/ls1021aiot.h
+@@ -78,8 +78,8 @@
+ 		CONFIG_SYS_MONITOR_LEN)
+ #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+ #define CONFIG_SPL_BSS_START_ADDR	0x80100000
+-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+-#define CONFIG_SYS_MONITOR_LEN		0x80000
++#define CONFIG_SPL_BSS_MAX_SIZE		0xc0000
++#define CONFIG_SYS_MONITOR_LEN		0xc0000
+ #endif
+ 
+ #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL

package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch

@@ -173,7 +173,7 @@ Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
 +};
 --- /dev/null
 +++ b/configs/nanopi_r1_defconfig
-@@ -0,0 +1,22 @@
+@@ -0,0 +1,21 @@
 +CONFIG_ARM=y
 +CONFIG_ARCH_SUNXI=y
 +CONFIG_SPL=y
@@ -186,7 +186,6 @@ Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
 +CONFIG_NR_DRAM_BANKS=1
 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 +CONFIG_CONSOLE_MUX=y
-+CONFIG_SYS_CLK_FREQ=480000000
 +# CONFIG_CMD_FLASH is not set
 +# CONFIG_SPL_DOS_PARTITION is not set
 +# CONFIG_SPL_EFI_PARTITION is not set

package/devel/gdb/Makefile

@@ -66,6 +66,7 @@ CONFIGURE_ARGS+= \
 	--without-mpc \
 	--without-mpfr \
 	--without-isl \
+	--without-xxhash \
 	--with-libgmp-prefix=$(STAGING_DIR)/usr
 
 CONFIGURE_VARS+= \

package/devel/strace/Makefile

@@ -9,17 +9,17 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=strace
-PKG_VERSION:=5.16
+PKG_VERSION:=5.19
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=https://strace.io/files/$(PKG_VERSION)
-PKG_HASH:=dc7db230ff3e57c249830ba94acab2b862da1fcaac55417e9b85041a833ca285
+PKG_HASH:=aa3dc1c8e60e4f6ff3d396514aa247f3c7bf719d8a8dc4dd4fa793be786beca3
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_LICENSE:=LGPL-2.1-or-later
 PKG_LICENSE_FILES:=COPYING
-PKG_CPE_ID:=cpe:/a:paul_kranenburg:strace
+PKG_CPE_ID:=cpe:/a:strace_project:strace
 
 PKG_FIXUP:=autoreconf
 PKG_INSTALL:=1
@@ -29,6 +29,7 @@ PKG_CONFIG_DEPENDS := \
 	CONFIG_STRACE_LIBUNWIND
 
 include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
 
 HOST_CFLAGS += -I$(LINUX_DIR)/user_headers/include
 

package/firmware/ipq-wifi/Makefile

@@ -54,7 +54,8 @@ ALLWIFIBOARDS:= \
 	qxwlan_e2600ac-c1 \
 	qxwlan_e2600ac-c2 \
 	teltonika_rutx \
-	zte_mf286d
+	zte_mf286d \
+	zte_mf289f
 
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
 
@@ -145,5 +146,6 @@ $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac-c1,Qxwlan E2600AC C1))
 $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac-c2,Qxwlan E2600AC C2))
 $(eval $(call generate-ipq-wifi-package,teltonika_rutx,Teltonika RUTX))
 $(eval $(call generate-ipq-wifi-package,zte_mf286d,ZTE MF286D))
+$(eval $(call generate-ipq-wifi-package,zte_mf289f,ZTE MF289F))
 
 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))

package/firmware/linux-firmware/realtek.mk

@@ -69,13 +69,6 @@ define Package/rtl8192se-firmware/install
 endef
 $(eval $(call BuildPackage,rtl8192se-firmware))
 
-Package/rtl8192su-firmware = $(call Package/firmware-default,RealTek RTL8192SU firmware)
-define Package/rtl8192su-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8712u.bin $(1)/lib/firmware/rtlwifi
-endef
-$(eval $(call BuildPackage,rtl8192su-firmware))
-
 Package/rtl8723au-firmware = $(call Package/firmware-default,RealTek RTL8723AU firmware)
 define Package/rtl8723au-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi

package/firmware/wireless-regdb/Makefile

@@ -1,12 +1,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wireless-regdb
-PKG_VERSION:=2022.08.12
+PKG_VERSION:=2023.02.13
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
-PKG_HASH:=59c8f7d17966db71b27f90e735ee8f5b42ca3527694a8c5e6e9b56bd379c3b84
+PKG_HASH:=fe81e8a8694dc4753a45087a1c4c7e1b48dee5a59f5f796ce374ea550f0b2e73
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/kernel/bpf-headers/Makefile

@@ -39,7 +39,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/bpf-headers
   SECTION:=kernel
-  CATEGORY:=Kernel
+  CATEGORY:=Kernel modules
   TITLE:=eBPF kernel headers
   BUILDONLY:=1
   HIDDEN:=1

package/kernel/ksmbd/Makefile

@@ -1,12 +1,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ksmbd
-PKG_VERSION:=3.4.5
-PKG_RELEASE:=$(AUTORELEASE)
+PKG_VERSION:=3.4.7
+PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://codeload.github.com/cifsd-team/cifsd/tar.gz/$(PKG_VERSION)?
-PKG_HASH:=2873c8ba1027fc5b04c5f5344804ef1469ad7019a033456c16ca4aa3f2c161f0
+PKG_SOURCE_URL:=https://github.com/cifsd-team/ksmbd/releases/download/$(PKG_VERSION)
+PKG_HASH:=ed9ecb2232046054bf0c1fef41690890f99d93b1d72b7e7d158746ac9be18c7f
 
 PKG_LICENSE:=GPL-2.0-or-later
 PKG_LICENSE_FILES:=COPYING

package/kernel/linux/modules/block.mk

@@ -90,21 +90,6 @@ endef
 $(eval $(call KernelPackage,ata-artop))
 
 
-define KernelPackage/ata-marvell-sata
-  TITLE:=Marvell Serial ATA support
-  KCONFIG:=CONFIG_SATA_MV
-  FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
-  AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
-  $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-marvell-sata/description
- SATA support for marvell chipsets
-endef
-
-$(eval $(call KernelPackage,ata-marvell-sata))
-
-
 define KernelPackage/ata-nvidia-sata
   TITLE:=Nvidia Serial ATA support
   KCONFIG:=CONFIG_SATA_NV
@@ -508,6 +493,29 @@ endef
 $(eval $(call KernelPackage,nbd))
 
 
+define KernelPackage/nvme
+  SUBMENU:=$(BLOCK_MENU)
+  TITLE:=NVM Express block device
+  DEPENDS:=@PCI_SUPPORT
+  KCONFIG:= \
+	CONFIG_NVME_CORE \
+	CONFIG_BLK_DEV_NVME \
+	CONFIG_NVME_MULTIPATH=n \
+	CONFIG_NVME_HWMON=n
+  FILES:= \
+	$(LINUX_DIR)/drivers/nvme/host/nvme-core.ko \
+	$(LINUX_DIR)/drivers/nvme/host/nvme.ko
+  AUTOLOAD:=$(call AutoLoad,30,nvme-core nvme)
+endef
+
+define KernelPackage/nvme/description
+ Kernel module for NVM Express solid state drives directly
+ connected to the PCI or PCI Express bus.
+endef
+
+$(eval $(call KernelPackage,nvme))
+
+
 define KernelPackage/scsi-core
   SUBMENU:=$(BLOCK_MENU)
   TITLE:=SCSI device support

package/kernel/linux/modules/can.mk

@@ -152,7 +152,7 @@ define KernelPackage/can-mcp251x
 	CONFIG_SPI=y \
 	CONFIG_CAN_MCP251X
   FILES:=$(LINUX_DIR)/drivers/net/can/spi/mcp251x.ko
-  AUTOLOAD:=$(call AutoProbe,can-mcp251x)
+  AUTOLOAD:=$(call AutoProbe,mcp251x)
   $(call AddDepends/can)
 endef
 

package/kernel/linux/modules/crypto.mk

@@ -874,7 +874,7 @@ define KernelPackage/crypto-sha1/octeon
   AUTOLOAD+=$(call AutoLoad,09,octeon-sha1)
 endef
 
-KernelPackage/crypto-sha1/tegra=$(KernelPakcage/crypto-sha1/arm)
+KernelPackage/crypto-sha1/tegra=$(KernelPackage/crypto-sha1/arm)
 
 define KernelPackage/crypto-sha1/mpc85xx
   FILES+=$(LINUX_DIR)/arch/powerpc/crypto/sha1-ppc-spe.ko

package/kernel/linux/modules/fs.mk

@@ -484,7 +484,7 @@ $(eval $(call KernelPackage,fs-nfsd))
 
 define KernelPackage/fs-ntfs
   SUBMENU:=$(FS_MENU)
-  TITLE:=NTFS filesystem support
+  TITLE:=NTFS filesystem read-only (old driver) support
   KCONFIG:=CONFIG_NTFS_FS
   FILES:=$(LINUX_DIR)/fs/ntfs/ntfs.ko
   AUTOLOAD:=$(call AutoLoad,30,ntfs)
@@ -492,7 +492,8 @@ define KernelPackage/fs-ntfs
 endef
 
 define KernelPackage/fs-ntfs/description
- Kernel module for NTFS filesystem support
+ Kernel module for limited NTFS filesystem support. Support for writing
+ is extremely limited and disabled as a result.
 endef
 
 $(eval $(call KernelPackage,fs-ntfs))

package/kernel/linux/modules/hwmon.mk

@@ -474,6 +474,21 @@ endef
 $(eval $(call KernelPackage,hwmon-sht21))
 
 
+define KernelPackage/hwmon-sht3x
+  TITLE:=Sensiron SHT3x and compat. monitoring support
+  KCONFIG:=CONFIG_SENSORS_SHT3x
+  FILES:=$(LINUX_DIR)/drivers/hwmon/sht3x.ko
+  AUTOLOAD:=$(call AutoProbe,sht3x)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-lib-crc8)
+endef
+
+define KernelPackage/hwmon-sht3x/description
+ Kernel module for Sensirion SHT3x temperature and humidity sensors chip
+endef
+
+$(eval $(call KernelPackage,hwmon-sht3x))
+
+
 define KernelPackage/hwmon-tmp102
   TITLE:=Texas Instruments TMP102 monitoring support
   KCONFIG:=CONFIG_SENSORS_TMP102

package/kernel/linux/modules/netdevices.mk

@@ -275,6 +275,40 @@ endef
 $(eval $(call KernelPackage,phy-bcm84881))
 
 
+define KernelPackage/phy-marvell
+   SUBMENU:=$(NETWORK_DEVICES_MENU)
+   TITLE:=Marvell Gigabit Ethernet PHY driver
+   KCONFIG:=CONFIG_MARVELL_PHY
+   DEPENDS:=+kmod-libphy
+   FILES:=$(LINUX_DIR)/drivers/net/phy/marvell.ko
+   AUTOLOAD:=$(call AutoLoad,18,marvell)
+endef
+
+define KernelPackage/phy-marvell/description
+   Supports Marvell Gigabit Ethernet PHYs:
+   * 88E1101
+   * 88E1112
+   * 88E1111 (incl. Finisar variant)
+   * 88E1118
+   * 88E1121R
+   * 88E1145
+   * 88E1149R
+   * 88E1240
+   * 88E1318S
+   * 88E1116R
+   * 88E1510
+   * 88E1540
+   * 88E1545
+   * 88E3016
+   * 88E6341 family
+   * 88E6390 family
+   * 88E6393 family
+   * 88E1340S
+   * 88E1548P
+endef
+
+$(eval $(call KernelPackage,phy-marvell))
+
 
 define KernelPackage/phy-realtek
    SUBMENU:=$(NETWORK_DEVICES_MENU)

package/kernel/linux/modules/netsupport.mk

@@ -163,38 +163,6 @@ endef
 $(eval $(call KernelPackage,misdn))
 
 
-define KernelPackage/isdn4linux
-  SUBMENU:=$(NETWORK_SUPPORT_MENU)
-  TITLE:=Old ISDN4Linux (deprecated)
-  DEPENDS:=+kmod-ppp
-  KCONFIG:= \
-	CONFIG_ISDN=y \
-    CONFIG_ISDN_I4L \
-    CONFIG_ISDN_PPP=y \
-    CONFIG_ISDN_PPP_VJ=y \
-    CONFIG_ISDN_MPP=y \
-    CONFIG_IPPP_FILTER=y \
-    CONFIG_ISDN_PPP_BSDCOMP \
-    CONFIG_ISDN_CAPI_MIDDLEWARE=y \
-    CONFIG_ISDN_CAPI_CAPIFS_BOOL=y \
-    CONFIG_ISDN_AUDIO=y \
-    CONFIG_ISDN_TTY_FAX=y \
-    CONFIG_ISDN_X25=y \
-    CONFIG_ISDN_DIVERSION
-  FILES:= \
-    $(LINUX_DIR)/drivers/isdn/divert/dss1_divert.ko \
-	$(LINUX_DIR)/drivers/isdn/i4l/isdn.ko \
-	$(LINUX_DIR)/drivers/isdn/i4l/isdn_bsdcomp.ko
-  AUTOLOAD:=$(call AutoLoad,40,isdn isdn_bsdcomp dss1_divert)
-endef
-
-define KernelPackage/isdn4linux/description
-  This driver allows you to use an ISDN adapter for networking
-endef
-
-$(eval $(call KernelPackage,isdn4linux))
-
-
 define KernelPackage/ipip
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
   TITLE:=IP-in-IP encapsulation
@@ -247,10 +215,8 @@ $(eval $(call KernelPackage,ipsec))
 IPSEC4-m = \
 	ipv4/ah4 \
 	ipv4/esp4 \
-	ipv4/xfrm4_tunnel \
 	ipv4/ipcomp \
-
-IPSEC4-m += $(ifeq ($$(strip $$(call CompareKernelPatchVer,$$(KERNEL_PATCHVER),le,5.2))),ipv4/xfrm4_mode_beet ipv4/xfrm4_mode_transport ipv4/xfrm4_mode_tunnel)
+	ipv4/xfrm4_tunnel
 
 define KernelPackage/ipsec4
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
@@ -260,9 +226,6 @@ define KernelPackage/ipsec4
 	CONFIG_INET_AH \
 	CONFIG_INET_ESP \
 	CONFIG_INET_IPCOMP \
-	CONFIG_INET_XFRM_MODE_BEET \
-	CONFIG_INET_XFRM_MODE_TRANSPORT \
-	CONFIG_INET_XFRM_MODE_TUNNEL \
 	CONFIG_INET_XFRM_TUNNEL \
 	CONFIG_INET_ESP_OFFLOAD=n
   FILES:=$(foreach mod,$(IPSEC4-m),$(LINUX_DIR)/net/$(mod).ko)
@@ -275,9 +238,6 @@ define KernelPackage/ipsec4/description
  - ah4
  - esp4
  - ipcomp4
- - xfrm4_mode_beet
- - xfrm4_mode_transport
- - xfrm4_mode_tunnel
  - xfrm4_tunnel
 endef
 
@@ -287,10 +247,8 @@ $(eval $(call KernelPackage,ipsec4))
 IPSEC6-m = \
 	ipv6/ah6 \
 	ipv6/esp6 \
-	ipv6/xfrm6_tunnel \
 	ipv6/ipcomp6 \
-
-IPSEC6-m += $(ifeq ($$(strip $$(call CompareKernelPatchVer,$$(KERNEL_PATCHVER),le,5.2))),ipv6/xfrm6_mode_beet ipv6/xfrm6_mode_transport ipv6/xfrm6_mode_tunnel)
+	ipv6/xfrm6_tunnel
 
 define KernelPackage/ipsec6
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
@@ -300,9 +258,6 @@ define KernelPackage/ipsec6
 	CONFIG_INET6_AH \
 	CONFIG_INET6_ESP \
 	CONFIG_INET6_IPCOMP \
-	CONFIG_INET6_XFRM_MODE_BEET \
-	CONFIG_INET6_XFRM_MODE_TRANSPORT \
-	CONFIG_INET6_XFRM_MODE_TUNNEL \
 	CONFIG_INET6_XFRM_TUNNEL \
 	CONFIG_INET6_ESP_OFFLOAD=n
   FILES:=$(foreach mod,$(IPSEC6-m),$(LINUX_DIR)/net/$(mod).ko)
@@ -315,9 +270,6 @@ define KernelPackage/ipsec6/description
  - ah6
  - esp6
  - ipcomp6
- - xfrm6_mode_beet
- - xfrm6_mode_transport
- - xfrm6_mode_tunnel
  - xfrm6_tunnel
 endef
 
@@ -738,7 +690,7 @@ endef
 $(eval $(call KernelPackage,mppe))
 
 
-SCHED_MODULES_CORE = sch_ingress sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_tcindex cls_u32 em_u32 act_gact act_mirred act_skbedit cls_matchall
+SCHED_MODULES_CORE = sch_ingress sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_u32 em_u32 act_gact act_mirred act_skbedit cls_matchall
 SCHED_FILES_CORE = $(foreach mod,$(SCHED_MODULES_CORE),$(LINUX_DIR)/net/sched/$(mod).ko)
 
 define KernelPackage/sched-core
@@ -756,7 +708,6 @@ define KernelPackage/sched-core
 	CONFIG_NET_CLS_FLOW \
 	CONFIG_NET_CLS_FW \
 	CONFIG_NET_CLS_ROUTE4 \
-	CONFIG_NET_CLS_TCINDEX \
 	CONFIG_NET_CLS_U32 \
 	CONFIG_NET_ACT_GACT \
 	CONFIG_NET_ACT_MIRRED \
@@ -775,35 +726,52 @@ endef
 $(eval $(call KernelPackage,sched-core))
 
 
-define KernelPackage/sched-cake
+define KernelPackage/sched-act-police
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
-  TITLE:=Cake fq_codel/blue derived shaper
+  TITLE:=Traffic Policing
   DEPENDS:=+kmod-sched-core
-  KCONFIG:=CONFIG_NET_SCH_CAKE
-  FILES:=$(LINUX_DIR)/net/sched/sch_cake.ko
-  AUTOLOAD:=$(call AutoProbe,sch_cake)
+  KCONFIG:=CONFIG_NET_ACT_POLICE
+  FILES:=$(LINUX_DIR)/net/sched/act_police.ko
+  AUTOLOAD:=$(call AutoProbe,act_police)
 endef
 
-define KernelPackage/sched-cake/description
- Common Applications Kept Enhanced fq_codel/blue derived shaper
-endef
+$(eval $(call KernelPackage,sched-act-police))
 
-$(eval $(call KernelPackage,sched-cake))
 
-define KernelPackage/sched-flower
+define KernelPackage/sched-act-sample
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
-  TITLE:=Flower traffic classifier
+  TITLE:=Traffic Sampling
   DEPENDS:=+kmod-sched-core
-  KCONFIG:=CONFIG_NET_CLS_FLOWER
-  FILES:=$(LINUX_DIR)/net/sched/cls_flower.ko
-  AUTOLOAD:=$(call AutoProbe, cls_flower)
+  KCONFIG:= \
+	CONFIG_NET_ACT_SAMPLE \
+	CONFIG_PSAMPLE
+  FILES:= \
+	$(LINUX_DIR)/net/psample/psample.ko \
+	$(LINUX_DIR)/net/sched/act_sample.ko
+  AUTOLOAD:=$(call AutoProbe,act_sample psample)
 endef
 
-define KernelPackage/sched-flower/description
- Allows to classify packets based on a configurable combination of packet keys and masks.
+define KernelPackage/sched-act-sample/description
+ Packet sampling tc action.
 endef
 
-$(eval $(call KernelPackage,sched-flower))
+$(eval $(call KernelPackage,sched-act-sample))
+
+
+define KernelPackage/sched-act-ipt
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=IPtables targets
+  DEPENDS:=+kmod-ipt-core +kmod-sched-core
+  KCONFIG:=CONFIG_NET_ACT_IPT
+  FILES:=$(LINUX_DIR)/net/sched/act_ipt.ko
+  AUTOLOAD:=$(call AutoProbe, act_ipt)
+endef
+
+define KernelPackage/sched-act-ipt/description
+  Allows to invoke iptables targets after successful classification.
+endef
+
+$(eval $(call KernelPackage,sched-act-ipt))
 
 
 define KernelPackage/sched-act-vlan
@@ -822,55 +790,6 @@ endef
 $(eval $(call KernelPackage,sched-act-vlan))
 
 
-define KernelPackage/sched-mqprio
-  SUBMENU:=$(NETWORK_SUPPORT_MENU)
-  TITLE:=Multi-queue priority scheduler (MQPRIO)
-  DEPENDS:=+kmod-sched-core
-  KCONFIG:=CONFIG_NET_SCH_MQPRIO
-  FILES:=$(LINUX_DIR)/net/sched/sch_mqprio.ko
-  AUTOLOAD:=$(call AutoProbe, sch_mqprio)
-endef
-
-define KernelPackage/sched-mqprio/description
-  This scheduler allows QOS to be offloaded on NICs that have support for offloading QOS schedulers.
-endef
-
-$(eval $(call KernelPackage,sched-mqprio))
-
-define KernelPackage/sched-connmark
-  SUBMENU:=$(NETWORK_SUPPORT_MENU)
-  TITLE:=Traffic shaper conntrack mark support
-  DEPENDS:=+kmod-sched-core +kmod-ipt-core +kmod-ipt-conntrack-extra
-  KCONFIG:=CONFIG_NET_ACT_CONNMARK
-  FILES:=$(LINUX_DIR)/net/sched/act_connmark.ko
-  AUTOLOAD:=$(call AutoLoad,71, act_connmark)
-endef
-$(eval $(call KernelPackage,sched-connmark))
-
-define KernelPackage/sched-ctinfo
-  SUBMENU:=$(NETWORK_SUPPORT_MENU)
-  TITLE:=Traffic shaper ctinfo support
-  DEPENDS:=+kmod-sched-core +kmod-ipt-core +kmod-ipt-conntrack-extra
-  KCONFIG:=CONFIG_NET_ACT_CTINFO
-  FILES:=$(LINUX_DIR)/net/sched/act_ctinfo.ko
-  AUTOLOAD:=$(call AutoLoad,71, act_ctinfo)
-endef
-$(eval $(call KernelPackage,sched-ctinfo))
-
-define KernelPackage/sched-ipset
-  SUBMENU:=$(NETWORK_SUPPORT_MENU)
-  TITLE:=Traffic shaper ipset support
-  DEPENDS:=+kmod-sched-core +kmod-ipt-ipset
-  KCONFIG:= \
-	CONFIG_NET_EMATCH_IPSET
-  FILES:= \
-	$(LINUX_DIR)/net/sched/em_ipset.ko
-  AUTOLOAD:=$(call AutoLoad,72,em_ipset)
-endef
-
-$(eval $(call KernelPackage,sched-ipset))
-
-
 define KernelPackage/sched-bpf
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
   TITLE:=Traffic shaper support for Berkeley Packet Filter
@@ -886,6 +805,170 @@ endef
 $(eval $(call KernelPackage,sched-bpf))
 
 
+define KernelPackage/sched-cake
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Cake fq_codel/blue derived shaper
+  DEPENDS:=+kmod-sched-core
+  KCONFIG:=CONFIG_NET_SCH_CAKE
+  FILES:=$(LINUX_DIR)/net/sched/sch_cake.ko
+  AUTOLOAD:=$(call AutoProbe,sch_cake)
+endef
+
+define KernelPackage/sched-cake/description
+ Common Applications Kept Enhanced fq_codel/blue derived shaper
+endef
+
+$(eval $(call KernelPackage,sched-cake))
+
+
+define KernelPackage/sched-connmark
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Traffic shaper conntrack mark support
+  DEPENDS:=+kmod-sched-core +kmod-ipt-core +kmod-ipt-conntrack-extra
+  KCONFIG:=CONFIG_NET_ACT_CONNMARK
+  FILES:=$(LINUX_DIR)/net/sched/act_connmark.ko
+  AUTOLOAD:=$(call AutoLoad,71, act_connmark)
+endef
+$(eval $(call KernelPackage,sched-connmark))
+
+
+define KernelPackage/sched-ctinfo
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Traffic shaper ctinfo support
+  DEPENDS:=+kmod-sched-core +kmod-ipt-core +kmod-ipt-conntrack-extra
+  KCONFIG:=CONFIG_NET_ACT_CTINFO
+  FILES:=$(LINUX_DIR)/net/sched/act_ctinfo.ko
+  AUTOLOAD:=$(call AutoLoad,71, act_ctinfo)
+endef
+$(eval $(call KernelPackage,sched-ctinfo))
+
+
+define KernelPackage/sched-drr
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Deficit Round Robin scheduler (DRR)
+  DEPENDS:=+kmod-sched-core
+  KCONFIG:=CONFIG_NET_SCH_DRR
+  FILES:=$(LINUX_DIR)/net/sched/sch_drr.ko
+  AUTOLOAD:=$(call AutoProbe,sch_drr)
+endef
+
+define KernelPackage/sched-drr/description
+ DRR algorithm Configuration
+endef
+
+$(eval $(call KernelPackage,sched-drr))
+
+
+define KernelPackage/sched-flower
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Flower traffic classifier
+  DEPENDS:=+kmod-sched-core
+  KCONFIG:=CONFIG_NET_CLS_FLOWER
+  FILES:=$(LINUX_DIR)/net/sched/cls_flower.ko
+  AUTOLOAD:=$(call AutoProbe, cls_flower)
+endef
+
+define KernelPackage/sched-flower/description
+ Allows to classify packets based on a configurable combination of packet keys and masks.
+endef
+
+$(eval $(call KernelPackage,sched-flower))
+
+
+define KernelPackage/sched-fq-pie
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Flow Queue Proportional Integral Enhanced (FQ-PIE)
+  DEPENDS:=+kmod-sched-core +kmod-sched-pie
+  KCONFIG:=CONFIG_NET_SCH_FQ_PIE
+  FILES:=$(LINUX_DIR)/net/sched/sch_fq_pie.ko
+  AUTOLOAD:=$(call AutoProbe, sch_fq_pie)
+endef
+
+define KernelPackage/sched-fq-pie/description
+  A queuing discipline that combines Flow Queuing with the PIE AQM.
+endef
+
+$(eval $(call KernelPackage,sched-fq-pie))
+
+
+define KernelPackage/sched-ipset
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Traffic shaper ipset support
+  DEPENDS:=+kmod-sched-core +kmod-ipt-ipset
+  KCONFIG:= \
+	CONFIG_NET_EMATCH_IPSET
+  FILES:= \
+	$(LINUX_DIR)/net/sched/em_ipset.ko
+  AUTOLOAD:=$(call AutoLoad,72,em_ipset)
+endef
+
+$(eval $(call KernelPackage,sched-ipset))
+
+
+define KernelPackage/sched-mqprio
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Multi-queue priority scheduler (MQPRIO)
+  DEPENDS:=+kmod-sched-core
+  KCONFIG:=CONFIG_NET_SCH_MQPRIO
+  FILES:=$(LINUX_DIR)/net/sched/sch_mqprio.ko
+  AUTOLOAD:=$(call AutoProbe, sch_mqprio)
+endef
+
+define KernelPackage/sched-mqprio/description
+  This scheduler allows QOS to be offloaded on NICs that have support for offloading QOS schedulers.
+endef
+
+$(eval $(call KernelPackage,sched-mqprio))
+
+
+define KernelPackage/sched-pie
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Proportional Integral controller-Enhanced AQM (PIE)
+  DEPENDS:=+kmod-sched-core
+  KCONFIG:=CONFIG_NET_SCH_PIE
+  FILES:=$(LINUX_DIR)/net/sched/sch_pie.ko
+  AUTOLOAD:=$(call AutoProbe, sch_pie)
+endef
+
+define KernelPackage/sched-pie/description
+  A control theoretic active queue management scheme.
+endef
+
+$(eval $(call KernelPackage,sched-pie))
+
+
+define KernelPackage/sched-prio
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Multi Band Priority Queueing (PRIO)
+  DEPENDS:=+kmod-sched-core
+  KCONFIG:=CONFIG_NET_SCH_PRIO
+  FILES:=$(LINUX_DIR)/net/sched/sch_prio.ko
+  AUTOLOAD:=$(call AutoProbe,sch_prio)
+endef
+
+define KernelPackage/sched-prio/description
+ PRIO algorithm Configuration
+endef
+
+$(eval $(call KernelPackage,sched-prio))
+
+
+define KernelPackage/sched-red
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Random Early Detection (RED)
+  DEPENDS:=+kmod-sched-core
+  KCONFIG:=CONFIG_NET_SCH_RED
+  FILES:=$(LINUX_DIR)/net/sched/sch_red.ko
+  AUTOLOAD:=$(call AutoProbe,sch_red)
+endef
+
+define KernelPackage/sched-red/description
+ Random Early Detection (RED) algorithm Configuration
+endef
+
+$(eval $(call KernelPackage,sched-red))
+
+
 define KernelPackage/bpf-test
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
   TITLE:=Test Berkeley Packet Filter functionality
@@ -896,26 +979,21 @@ endef
 $(eval $(call KernelPackage,bpf-test))
 
 
-SCHED_MODULES_EXTRA = sch_codel sch_dsmark sch_gred sch_multiq sch_prio sch_red sch_sfq sch_teql sch_fq sch_pie act_police act_ipt act_pedit act_simple act_csum em_cmp em_nbyte em_meta em_text
+SCHED_MODULES_EXTRA = sch_codel sch_dsmark sch_gred sch_multiq sch_sfq sch_teql sch_fq act_pedit act_simple act_csum em_cmp em_nbyte em_meta em_text
 SCHED_FILES_EXTRA = $(foreach mod,$(SCHED_MODULES_EXTRA),$(LINUX_DIR)/net/sched/$(mod).ko)
 
 define KernelPackage/sched
   SUBMENU:=$(NETWORK_SUPPORT_MENU)
   TITLE:=Extra traffic schedulers
-  DEPENDS:=+kmod-sched-core +kmod-ipt-core +kmod-lib-crc32c +kmod-lib-textsearch
+  DEPENDS:=+kmod-sched-core +kmod-lib-crc32c +kmod-lib-textsearch
   KCONFIG:= \
 	CONFIG_NET_SCH_CODEL \
 	CONFIG_NET_SCH_DSMARK \
 	CONFIG_NET_SCH_GRED \
 	CONFIG_NET_SCH_MULTIQ \
-	CONFIG_NET_SCH_PRIO \
-	CONFIG_NET_SCH_RED \
 	CONFIG_NET_SCH_SFQ \
 	CONFIG_NET_SCH_TEQL \
 	CONFIG_NET_SCH_FQ \
-	CONFIG_NET_SCH_PIE \
-	CONFIG_NET_ACT_POLICE \
-	CONFIG_NET_ACT_IPT \
 	CONFIG_NET_ACT_PEDIT \
 	CONFIG_NET_ACT_SIMP \
 	CONFIG_NET_ACT_CSUM \
@@ -1342,3 +1420,19 @@ define KernelPackage/wireguard/description
 endef
 
 $(eval $(call KernelPackage,wireguard))
+
+
+define KernelPackage/netconsole
+  SUBMENU:=$(NETWORK_SUPPORT_MENU)
+  TITLE:=Network console logging support
+  KCONFIG:=CONFIG_NETCONSOLE \
+	  CONFIG_NETCONSOLE_DYNAMIC=n
+  FILES:=$(LINUX_DIR)/drivers/net/netconsole.ko
+  AUTOLOAD:=$(call AutoProbe,netconsole)
+endef
+
+define KernelPackage/netconsole/description
+  Network console logging support.
+endef
+
+$(eval $(call KernelPackage,netconsole))

package/kernel/linux/modules/other.mk

@@ -119,6 +119,24 @@ endef
 $(eval $(call KernelPackage,btmrvl))
 
 
+define KernelPackage/btsdio
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Bluetooth HCI SDIO driver
+  DEPENDS:=+kmod-bluetooth +kmod-mmc
+  KCONFIG:= \
+	CONFIG_BT_HCIBTSDIO
+  FILES:= \
+	$(LINUX_DIR)/drivers/bluetooth/btsdio.ko
+  AUTOLOAD:=$(call AutoProbe,btsdio)
+endef
+
+define KernelPackage/btsdio/description
+ Kernel support for Bluetooth device with SDIO interface
+endef
+
+$(eval $(call KernelPackage,btsdio))
+
+
 define KernelPackage/dma-buf
   SUBMENU:=$(OTHER_MENU)
   TITLE:=DMA shared buffer support
@@ -357,7 +375,6 @@ define KernelPackage/mmc
 	CONFIG_MMC_BLOCK \
 	CONFIG_MMC_DEBUG=n \
 	CONFIG_MMC_UNSAFE_RESUME=n \
-	CONFIG_MMC_BLOCK_BOUNCE=y \
 	CONFIG_MMC_TIFM_SD=n \
 	CONFIG_MMC_WBSD=n \
 	CONFIG_SDIO_UART=n
@@ -374,23 +391,6 @@ endef
 $(eval $(call KernelPackage,mmc))
 
 
-define KernelPackage/mvsdio
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Marvell MMC/SD/SDIO host driver
-  DEPENDS:=+kmod-mmc @TARGET_kirkwood
-  KCONFIG:= CONFIG_MMC_MVSDIO
-  FILES:= \
-	$(LINUX_DIR)/drivers/mmc/host/mvsdio.ko
-  AUTOLOAD:=$(call AutoProbe,mvsdio,1)
-endef
-
-define KernelPackage/mvsdio/description
- Kernel support for the Marvell SDIO host driver.
-endef
-
-$(eval $(call KernelPackage,mvsdio))
-
-
 define KernelPackage/sdhci
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Secure Digital Host Controller Interface support
@@ -647,22 +647,6 @@ endef
 
 $(eval $(call KernelPackage,rtc-pcf2127))
 
-define KernelPackage/rtc-pt7c4338
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=Pericom PT7C4338 RTC support
-  DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
-  DEPENDS:=+kmod-i2c-core
-  KCONFIG:=CONFIG_RTC_DRV_PT7C4338 \
-	CONFIG_RTC_CLASS=y
-  FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
-  AUTOLOAD:=$(call AutoProbe,rtc-pt7c4338)
-endef
-
-define KernelPackage/rtc-pt7c4338/description
- Kernel module for Pericom PT7C4338 i2c RTC chip
-endef
-
-$(eval $(call KernelPackage,rtc-pt7c4338))
 
 define KernelPackage/rtc-rs5c372a
   SUBMENU:=$(OTHER_MENU)

package/kernel/linux/modules/w1.mk

@@ -160,23 +160,6 @@ endef
 $(eval $(call KernelPackage,w1-slave-ds2433))
 
 
-define KernelPackage/w1-slave-ds2760
-  TITLE:=Dallas 2760 battery monitor chip (HP iPAQ & others)
-  KCONFIG:= \
-	CONFIG_W1_SLAVE_DS2760 \
-	CONFIG_W1_SLAVE_DS2433_CRC=n
-  FILES:=$(W1_SLAVES_DIR)/w1_ds2760.ko
-  AUTOLOAD:=$(call AutoProbe,w1_ds2760)
-  $(call AddDepends/w1)
-endef
-
-define KernelPackage/w1-slave-ds2760/description
- Kernel module for 1-wire DS2760 battery monitor chip support
-endef
-
-$(eval $(call KernelPackage,w1-slave-ds2760))
-
-
 define KernelPackage/w1-slave-ds2413
   TITLE:=DS2413 2 Ch. Addressable Switch
   KCONFIG:= \

package/kernel/linux/modules/wireless.mk

@@ -22,21 +22,3 @@ define KernelPackage/net-prism54/description
 endef
 
 $(eval $(call KernelPackage,net-prism54))
-
-
-define KernelPackage/net-rtl8192su
-  SUBMENU:=$(WIRELESS_MENU)
-  TITLE:=RTL8192SU support (staging)
-  DEPENDS:=@USB_SUPPORT +@DRIVER_WEXT_SUPPORT +kmod-usb-core +rtl8192su-firmware
-  KCONFIG:=\
-	CONFIG_STAGING=y \
-	CONFIG_R8712U
-  FILES:=$(LINUX_DIR)/drivers/staging/rtl8712/r8712u.ko
-  AUTOLOAD:=$(call AutoProbe,r8712u)
-endef
-
-define KernelPackage/net-rtl8192su/description
- Kernel modules for RealTek RTL8712 and RTL81XXSU fullmac support.
-endef
-
-$(eval $(call KernelPackage,net-rtl8192su))

package/kernel/mac80211/Makefile

@@ -10,10 +10,10 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=5.15.58-1
+PKG_VERSION:=5.15.92-1
 PKG_RELEASE:=1
-PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.15.58/
-PKG_HASH:=a3c2a2b7bbaf8943c65fd72f4e7d7ad5e205aeae28b26c835f9d8afa0f9810bf
+PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.15.92/
+PKG_HASH:=d518e3614a0a8b635e7b7febf2a3ee1645a95d953fd353920ceee22f159f26f1
 
 PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)

package/kernel/mac80211/broadcom.mk

@@ -401,7 +401,7 @@ define KernelPackage/brcmsmac
   $(call KernelPackage/mac80211/Default)
   TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
   URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
-  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_bcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
+  DEPENDS+=@!TARGET_bcm47xx_legacy +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_bcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko
   AUTOLOAD:=$(call AutoProbe,brcmsmac)
   MENU:=1

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -800,8 +800,8 @@ mac80211_setup_supplicant_noctl() {
 
 mac80211_prepare_iw_htmode() {
 	case "$htmode" in
-		VHT20|HT20) iw_htmode=HT20;;
-		HT40*|VHT40|VHT160)
+		VHT20|HT20|HE20) iw_htmode=HT20;;
+		HT40*|VHT40|VHT160|HE40)
 			case "$band" in
 				2g)
 					case "$htmode" in
@@ -825,7 +825,7 @@ mac80211_prepare_iw_htmode() {
 			esac
 			[ "$auto_channel" -gt 0 ] && iw_htmode="HT40+"
 		;;
-		VHT80)
+		VHT80|HE80)
 			iw_htmode="80MHZ"
 		;;
 		NONE|NOHT)

package/kernel/mac80211/patches/ath/404-regd_no_assoc_hints.patch

@@ -1,6 +1,6 @@
 --- a/net/wireless/reg.c
 +++ b/net/wireless/reg.c
-@@ -3309,6 +3309,8 @@ void regulatory_hint_country_ie(struct w
+@@ -3315,6 +3315,8 @@ void regulatory_hint_country_ie(struct w
  	enum environment_cap env = ENVIRON_ANY;
  	struct regulatory_request *request = NULL, *lr;
  
@@ -9,7 +9,7 @@
  	/* IE len must be evenly divisible by 2 */
  	if (country_ie_len & 0x01)
  		return;
-@@ -3560,6 +3562,7 @@ static bool is_wiphy_all_set_reg_flag(en
+@@ -3566,6 +3568,7 @@ static bool is_wiphy_all_set_reg_flag(en
  
  void regulatory_hint_disconnect(void)
  {

package/kernel/mac80211/patches/ath10k/930-ath10k_add_tpt_led_trigger.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -9859,6 +9859,21 @@ static int ath10k_mac_init_rd(struct ath
+@@ -9863,6 +9863,21 @@ static int ath10k_mac_init_rd(struct ath
  	return 0;
  }
  
@@ -22,7 +22,7 @@
  int ath10k_mac_register(struct ath10k *ar)
  {
  	static const u32 cipher_suites[] = {
-@@ -10211,6 +10226,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10215,6 +10230,12 @@ int ath10k_mac_register(struct ath10k *a
  
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  

package/kernel/mac80211/patches/ath10k/975-ath10k-use-tpt-trigger-by-default.patch

@@ -42,7 +42,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	if (ret)
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -10228,7 +10228,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10232,7 +10232,7 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  
  #ifdef CPTCFG_MAC80211_LEDS

package/kernel/mac80211/patches/ath10k/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch

@@ -28,7 +28,7 @@ Forwarded: no
 
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -1021,6 +1021,40 @@ static inline int ath10k_vdev_setup_sync
+@@ -1028,6 +1028,40 @@ static inline int ath10k_vdev_setup_sync
  	return ar->last_wmi_vdev_start_status;
  }
  
@@ -69,7 +69,7 @@ Forwarded: no
  static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
  {
  	struct cfg80211_chan_def *chandef = NULL;
-@@ -1053,7 +1087,8 @@ static int ath10k_monitor_vdev_start(str
+@@ -1060,7 +1094,8 @@ static int ath10k_monitor_vdev_start(str
  	arg.channel.min_power = 0;
  	arg.channel.max_power = channel->max_power * 2;
  	arg.channel.max_reg_power = channel->max_reg_power * 2;
@@ -79,7 +79,7 @@ Forwarded: no
  
  	reinit_completion(&ar->vdev_setup_done);
  	reinit_completion(&ar->vdev_delete_done);
-@@ -1499,7 +1534,8 @@ static int ath10k_vdev_start_restart(str
+@@ -1506,7 +1541,8 @@ static int ath10k_vdev_start_restart(str
  	arg.channel.min_power = 0;
  	arg.channel.max_power = chandef->chan->max_power * 2;
  	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
@@ -89,7 +89,7 @@ Forwarded: no
  
  	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
  		arg.ssid = arvif->u.ap.ssid;
-@@ -3427,7 +3463,8 @@ static int ath10k_update_channel_list(st
+@@ -3434,7 +3470,8 @@ static int ath10k_update_channel_list(st
  			ch->min_power = 0;
  			ch->max_power = channel->max_power * 2;
  			ch->max_reg_power = channel->max_reg_power * 2;

package/kernel/mac80211/patches/brcm/998-survey.patch

@@ -100,7 +100,7 @@
  	.add_key = brcmf_cfg80211_add_key,
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1361,6 +1361,8 @@ int brcmf_attach(struct device *dev)
+@@ -1362,6 +1362,8 @@ int brcmf_attach(struct device *dev)
  
  	/* Link to bus module */
  	drvr->hdrlen = 0;
@@ -109,7 +109,7 @@
  
  	/* Attach and link in the protocol */
  	ret = brcmf_proto_attach(drvr);
-@@ -1443,6 +1445,12 @@ void brcmf_detach(struct device *dev)
+@@ -1444,6 +1446,12 @@ void brcmf_detach(struct device *dev)
  	if (drvr == NULL)
  		return;
  

package/kernel/mac80211/patches/rt2x00/001-rt2x00-define-RF5592-in-init_eeprom-routine.patch

@@ -41,7 +41,7 @@ Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
 
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9435,6 +9435,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9461,6 +9461,8 @@ static int rt2800_init_eeprom(struct rt2
  		rf = RF3853;
  	else if (rt2x00_rt(rt2x00dev, RT5350))
  		rf = RF5350;

package/kernel/mac80211/patches/rt2x00/003-rt2x00-add-support-for-external-PA-on-MT7620.patch

@@ -50,8 +50,8 @@ Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
   * EEPROM LNA
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4368,6 +4368,43 @@ static void rt2800_config_channel(struct
- 		rt2800_iq_calibrate(rt2x00dev, rf->channel);
+@@ -4372,6 +4372,43 @@ static void rt2800_config_channel(struct
+ 			rt2800_iq_calibrate(rt2x00dev, rf->channel);
  	}
  
 +	if (rt2x00_rt(rt2x00dev, RT6352)) {
@@ -94,7 +94,7 @@ Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
  	bbp = rt2800_bbp_read(rt2x00dev, 4);
  	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
  	rt2800_bbp_write(rt2x00dev, 4, bbp);
-@@ -9566,7 +9603,8 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9592,7 +9629,8 @@ static int rt2800_init_eeprom(struct rt2
  	 */
  	eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
  
@@ -104,7 +104,7 @@ Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
  		if (rt2x00_get_field16(eeprom,
  		    EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352))
  		    __set_bit(CAPABILITY_EXTERNAL_PA_TX0,
-@@ -9577,6 +9615,18 @@ static int rt2800_init_eeprom(struct rt2
+@@ -9603,6 +9641,18 @@ static int rt2800_init_eeprom(struct rt2
  			      &rt2x00dev->cap_flags);
  	}
  

package/kernel/mac80211/patches/rt2x00/004-rt2x00-move-up-and-reuse-busy-wait-functions.patch

@@ -120,7 +120,7 @@ Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
  
  	if (chan->center_freq > 2457) {
  		bbp = rt2800_bbp_read(rt2x00dev, 30);
-@@ -6249,46 +6282,6 @@ static int rt2800_init_registers(struct
+@@ -6275,46 +6308,6 @@ static int rt2800_init_registers(struct
  	return 0;
  }
  
@@ -167,7 +167,7 @@ Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
  
  static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev)
  {
-@@ -9110,7 +9103,7 @@ int rt2800_enable_radio(struct rt2x00_de
+@@ -9136,7 +9129,7 @@ int rt2800_enable_radio(struct rt2x00_de
  	/*
  	 * Wait BBP/RF to wake up.
  	 */

package/kernel/mac80211/patches/rt2x00/005-rt2x00-add-RF-self-TXDC-calibration-for-MT7620.patch

@@ -42,7 +42,7 @@ v2: use ++i instead of i = i + 1 in loops
 
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8428,6 +8428,53 @@ static void rt2800_init_rfcsr_5592(struc
+@@ -8454,6 +8454,53 @@ static void rt2800_init_rfcsr_5592(struc
  	rt2800_led_open_drain_enable(rt2x00dev);
  }
  
@@ -96,7 +96,7 @@ v2: use ++i instead of i = i + 1 in loops
  static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
  				       bool set_bw, bool is_ht40)
  {
-@@ -9035,6 +9082,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9061,6 +9108,7 @@ static void rt2800_init_rfcsr_6352(struc
  	rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
  	rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
  

package/kernel/mac80211/patches/rt2x00/006-rt2x00-add-r-calibration-for-MT7620.patch

@@ -54,7 +54,7 @@ v2: use rt2800_wait_bbp_rf_ready()
   * PWR_PIN_CFG:
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8475,6 +8475,138 @@ static void rt2800_rf_self_txdc_cal(stru
+@@ -8501,6 +8501,138 @@ static void rt2800_rf_self_txdc_cal(stru
  	rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c);
  }
  
@@ -193,7 +193,7 @@ v2: use rt2800_wait_bbp_rf_ready()
  static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
  				       bool set_bw, bool is_ht40)
  {
-@@ -9082,6 +9214,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9108,6 +9240,7 @@ static void rt2800_init_rfcsr_6352(struc
  	rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
  	rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
  

package/kernel/mac80211/patches/rt2x00/007-rt2x00-add-RXDCOC-calibration-for-MT7620.patch

@@ -41,7 +41,7 @@ Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
 
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8607,6 +8607,65 @@ static void rt2800_r_calibration(struct
+@@ -8633,6 +8633,65 @@ static void rt2800_r_calibration(struct
  	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, MAC_PWR_PIN_CFG);
  }
  
@@ -107,7 +107,7 @@ Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
  static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
  				       bool set_bw, bool is_ht40)
  {
-@@ -9216,6 +9275,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9242,6 +9301,7 @@ static void rt2800_init_rfcsr_6352(struc
  
  	rt2800_r_calibration(rt2x00dev);
  	rt2800_rf_self_txdc_cal(rt2x00dev);

package/kernel/mac80211/patches/rt2x00/008-rt2x00-add-RXIQ-calibration-for-MT7620.patch

@@ -43,7 +43,7 @@ v2: use rt2800_wait_bbp_rf_ready(), fix indentation
 
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -8666,6 +8666,380 @@ static void rt2800_rxdcoc_calibration(st
+@@ -8692,6 +8692,380 @@ static void rt2800_rxdcoc_calibration(st
  	rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, saverfb0r2);
  }
  
@@ -424,7 +424,7 @@ v2: use rt2800_wait_bbp_rf_ready(), fix indentation
  static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
  				       bool set_bw, bool is_ht40)
  {
-@@ -9278,6 +9652,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9304,6 +9678,7 @@ static void rt2800_init_rfcsr_6352(struc
  	rt2800_rxdcoc_calibration(rt2x00dev);
  	rt2800_bw_filter_calibration(rt2x00dev, true);
  	rt2800_bw_filter_calibration(rt2x00dev, false);

package/kernel/mac80211/patches/rt2x00/009-rt2x00-don-t-run-Rt5592-IQ-calibration-on-MT7620.patch

@@ -1,52 +0,0 @@
-From patchwork Sat Sep 17 20:28:29 2022
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 12979250
-X-Patchwork-Delegate: kvalo@adurom.com
-Return-Path: <linux-wireless-owner@kernel.org>
-Date: Sat, 17 Sep 2022 21:28:29 +0100
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
-        Helmut Schaa <helmut.schaa@googlemail.com>
-Cc: Kalle Valo <kvalo@kernel.org>,
-        "David S. Miller" <davem@davemloft.net>,
-        Eric Dumazet <edumazet@google.com>,
-        Jakub Kicinski <kuba@kernel.org>,
-        Paolo Abeni <pabeni@redhat.com>,
-        Johannes Berg <johannes.berg@intel.com>
-Subject: [PATCH v3 09/16] rt2x00: don't run Rt5592 IQ calibration on MT7620
-Message-ID: 
- <31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org>
-References: <cover.1663445157.git.daniel@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
-Precedence: bulk
-List-ID: <linux-wireless.vger.kernel.org>
-X-Mailing-List: linux-wireless@vger.kernel.org
-
-The function rt2800_iq_calibrate is intended for Rt5592 only.
-Don't call it for MT7620 which has it's own calibration functions.
-
-Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
-v2: test for RT5592 instead of !RT6352
-
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4398,7 +4398,8 @@ static void rt2800_config_channel(struct
- 		reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain;
- 		rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
- 
--		rt2800_iq_calibrate(rt2x00dev, rf->channel);
-+		if (rt2x00_rt(rt2x00dev, RT5592))
-+			rt2800_iq_calibrate(rt2x00dev, rf->channel);
- 	}
- 
- 	if (rt2x00_rt(rt2x00dev, RT6352)) {

package/kernel/mac80211/patches/rt2x00/010-rt2x00-add-TX-LOFT-calibration-for-MT7620.patch

@@ -45,7 +45,7 @@ Reported-by: kernel test robot <lkp@intel.com>
 
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -9041,6 +9041,907 @@ restore_value:
+@@ -9066,6 +9066,907 @@ restore_value:
  	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, savemacsysctrl);
  }
  
@@ -953,7 +953,7 @@ Reported-by: kernel test robot <lkp@intel.com>
  static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
  				       bool set_bw, bool is_ht40)
  {
-@@ -9653,6 +10554,7 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -9678,6 +10579,7 @@ static void rt2800_init_rfcsr_6352(struc
  	rt2800_rxdcoc_calibration(rt2x00dev);
  	rt2800_bw_filter_calibration(rt2x00dev, true);
  	rt2800_bw_filter_calibration(rt2x00dev, false);

package/kernel/mac80211/patches/rt2x00/011-rt2x00-move-helper-functions-up-in-file.patch

@@ -65,7 +65,7 @@ Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
  static u8 rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
  			    const unsigned int word)
  {
-@@ -6947,26 +6967,6 @@ static void rt2800_init_bbp_5592(struct
+@@ -6972,26 +6992,6 @@ static void rt2800_init_bbp_5592(struct
  		rt2800_bbp_write(rt2x00dev, 103, 0xc0);
  }
  

package/kernel/mac80211/patches/rt2x00/013-rt2x00-set-correct-TX_SW_CFG1-MAC-register-for-MT7620.patch

@@ -1,52 +0,0 @@
-From patchwork Sat Sep 17 20:29:26 2022
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 12979254
-X-Patchwork-Delegate: kvalo@adurom.com
-Return-Path: <linux-wireless-owner@kernel.org>
-Date: Sat, 17 Sep 2022 21:29:26 +0100
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
-        Helmut Schaa <helmut.schaa@googlemail.com>
-Cc: Kalle Valo <kvalo@kernel.org>,
-        "David S. Miller" <davem@davemloft.net>,
-        Eric Dumazet <edumazet@google.com>,
-        Jakub Kicinski <kuba@kernel.org>,
-        Paolo Abeni <pabeni@redhat.com>,
-        Johannes Berg <johannes.berg@intel.com>
-Subject: [PATCH v3 13/16] rt2x00: set correct TX_SW_CFG1 MAC register for
- MT7620
-Message-ID: 
- <4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org>
-References: <cover.1663445157.git.daniel@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
-Precedence: bulk
-List-ID: <linux-wireless.vger.kernel.org>
-X-Mailing-List: linux-wireless@vger.kernel.org
-
-Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the
-vendor driver[1].
-
-[1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531
-Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -5966,7 +5966,7 @@ static int rt2800_init_registers(struct
- 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
- 	} else if (rt2x00_rt(rt2x00dev, RT6352)) {
- 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
--		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
-+		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);
- 		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
- 		rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
- 		rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);

package/kernel/mac80211/patches/rt2x00/014-rt2x00-set-VGC-gain-for-both-chains-of-MT7620.patch

@@ -1,50 +0,0 @@
-From patchwork Sat Sep 17 20:29:40 2022
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 12979255
-X-Patchwork-Delegate: kvalo@adurom.com
-Return-Path: <linux-wireless-owner@kernel.org>
-Date: Sat, 17 Sep 2022 21:29:40 +0100
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
-        Helmut Schaa <helmut.schaa@googlemail.com>
-Cc: Kalle Valo <kvalo@kernel.org>,
-        "David S. Miller" <davem@davemloft.net>,
-        Eric Dumazet <edumazet@google.com>,
-        Jakub Kicinski <kuba@kernel.org>,
-        Paolo Abeni <pabeni@redhat.com>,
-        Johannes Berg <johannes.berg@intel.com>
-Subject: [PATCH v3 14/16] rt2x00: set VGC gain for both chains of MT7620
-Message-ID: 
- <29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org>
-References: <cover.1663445157.git.daniel@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
-Precedence: bulk
-List-ID: <linux-wireless.vger.kernel.org>
-X-Mailing-List: linux-wireless@vger.kernel.org
-
-Set bbp66 for all chains of the MT7620.
-
-Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -5743,7 +5743,8 @@ static inline void rt2800_set_vgc(struct
- 	if (qual->vgc_level != vgc_level) {
- 		if (rt2x00_rt(rt2x00dev, RT3572) ||
- 		    rt2x00_rt(rt2x00dev, RT3593) ||
--		    rt2x00_rt(rt2x00dev, RT3883)) {
-+		    rt2x00_rt(rt2x00dev, RT3883) ||
-+		    rt2x00_rt(rt2x00dev, RT6352)) {
- 			rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
- 						       vgc_level);
- 		} else if (rt2x00_rt(rt2x00dev, RT5592)) {

package/kernel/mac80211/patches/rt2x00/015-rt2x00-set-SoC-wmac-clock-register.patch

@@ -1,70 +0,0 @@
-From patchwork Sat Sep 17 20:29:55 2022
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 12979256
-X-Patchwork-Delegate: kvalo@adurom.com
-Return-Path: <linux-wireless-owner@kernel.org>
-Date: Sat, 17 Sep 2022 21:29:55 +0100
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
-        Helmut Schaa <helmut.schaa@googlemail.com>
-Cc: Kalle Valo <kvalo@kernel.org>,
-        "David S. Miller" <davem@davemloft.net>,
-        Eric Dumazet <edumazet@google.com>,
-        Jakub Kicinski <kuba@kernel.org>,
-        Paolo Abeni <pabeni@redhat.com>,
-        Johannes Berg <johannes.berg@intel.com>
-Subject: [PATCH v3 15/16] rt2x00: set SoC wmac clock register
-Message-ID: 
- <3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org>
-References: <cover.1663445157.git.daniel@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
-Precedence: bulk
-List-ID: <linux-wireless.vger.kernel.org>
-X-Mailing-List: linux-wireless@vger.kernel.org
-
-Instead of using the default value 33 (pci), set US_CYC_CNT init based
-on Programming guide:
-If available, set chipset bus clock with fallback to cpu clock/3.
-
-Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
----
- .../net/wireless/ralink/rt2x00/rt2800lib.c    | 21 +++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -6229,6 +6229,27 @@ static int rt2800_init_registers(struct
- 		reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
- 		rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 125);
- 		rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
-+	} else if (rt2x00_is_soc(rt2x00dev)) {
-+		struct clk *clk = clk_get_sys("bus", NULL);
-+		int rate;
-+
-+		if (IS_ERR(clk)) {
-+			clk = clk_get_sys("cpu", NULL);
-+
-+			if (IS_ERR(clk)) {
-+				rate = 125;
-+			} else {
-+				rate = clk_get_rate(clk) / 3000000;
-+				clk_put(clk);
-+			}
-+		} else {
-+			rate = clk_get_rate(clk) / 1000000;
-+			clk_put(clk);
-+		}
-+
-+		reg = rt2800_register_read(rt2x00dev, US_CYC_CNT);
-+		rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, rate);
-+		rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
- 	}
- 
- 	reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0);

package/kernel/mac80211/patches/rt2x00/016-rt2x00-correctly-set-BBP-register-86-for-MT7620.patch

@@ -1,79 +0,0 @@
-From patchwork Sat Sep 17 20:30:09 2022
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 12979257
-X-Patchwork-Delegate: kvalo@adurom.com
-Return-Path: <linux-wireless-owner@kernel.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
-	aws-us-west-2-korg-lkml-1.web.codeaurora.org
-Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
-	by smtp.lore.kernel.org (Postfix) with ESMTP id E9118ECAAA1
-	for <linux-wireless@archiver.kernel.org>;
- Sat, 17 Sep 2022 20:30:22 +0000 (UTC)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-        id S229639AbiIQUaV (ORCPT
-        <rfc822;linux-wireless@archiver.kernel.org>);
-        Sat, 17 Sep 2022 16:30:21 -0400
-Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53912 "EHLO
-        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-        with ESMTP id S229628AbiIQUaT (ORCPT
-        <rfc822;linux-wireless@vger.kernel.org>);
-        Sat, 17 Sep 2022 16:30:19 -0400
-Received: from fudo.makrotopia.org (fudo.makrotopia.org
- [IPv6:2a07:2ec0:3002::71])
-        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1AEA822B27
-        for <linux-wireless@vger.kernel.org>;
- Sat, 17 Sep 2022 13:30:16 -0700 (PDT)
-Received: from local
-        by fudo.makrotopia.org with esmtpsa
- (TLS1.3:TLS_AES_256_GCM_SHA384:256)
-         (Exim 4.96)
-        (envelope-from <daniel@makrotopia.org>)
-        id 1oZeS7-0003ra-0k;
-        Sat, 17 Sep 2022 22:30:15 +0200
-Date: Sat, 17 Sep 2022 21:30:09 +0100
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-wireless@vger.kernel.org, Stanislaw Gruszka <stf_xl@wp.pl>,
-        Helmut Schaa <helmut.schaa@googlemail.com>
-Cc: Kalle Valo <kvalo@kernel.org>,
-        "David S. Miller" <davem@davemloft.net>,
-        Eric Dumazet <edumazet@google.com>,
-        Jakub Kicinski <kuba@kernel.org>,
-        Paolo Abeni <pabeni@redhat.com>,
-        Johannes Berg <johannes.berg@intel.com>
-Subject: [PATCH v3 16/16] rt2x00: correctly set BBP register 86 for MT7620
-Message-ID: 
- <257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org>
-References: <cover.1663445157.git.daniel@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-In-Reply-To: <cover.1663445157.git.daniel@makrotopia.org>
-Precedence: bulk
-List-ID: <linux-wireless.vger.kernel.org>
-X-Mailing-List: linux-wireless@vger.kernel.org
-
-Instead of 0 set the correct value for BBP register 86 for MT7620.
-
-Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
----
- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -4225,7 +4225,10 @@ static void rt2800_config_channel(struct
- 		rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
- 		rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
- 		rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
--		rt2800_bbp_write(rt2x00dev, 86, 0);
-+		if (rt2x00_rt(rt2x00dev, RT6352))
-+			rt2800_bbp_write(rt2x00dev, 86, 0x38);
-+		else
-+			rt2800_bbp_write(rt2x00dev, 86, 0);
- 	}
- 
- 	if (rf->channel <= 14) {

package/kernel/mac80211/patches/subsys/150-disable_addr_notifier.patch

@@ -52,7 +52,7 @@
   fail_ifa:
  #endif
  	wiphy_unregister(local->hw.wiphy);
-@@ -1371,10 +1371,10 @@ void ieee80211_unregister_hw(struct ieee
+@@ -1373,10 +1373,10 @@ void ieee80211_unregister_hw(struct ieee
  	tasklet_kill(&local->tx_pending_tasklet);
  	tasklet_kill(&local->tasklet);
  

package/kernel/mac80211/patches/subsys/303-mac80211-set-up-the-fwd_skb-dev-for-mesh-forwarding.patch

@@ -52,7 +52,7 @@ Signed-off-by: Xing Song <xing.song@mediatek.com>
 
 --- a/net/mac80211/rx.c
 +++ b/net/mac80211/rx.c
-@@ -2948,6 +2948,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
+@@ -2950,6 +2950,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
  	if (!fwd_skb)
  		goto out;
  

package/kernel/mac80211/patches/subsys/307-mac80211_hwsim-make-6-GHz-channels-usable.patch

@@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/drivers/net/wireless/mac80211_hwsim.c
 +++ b/drivers/net/wireless/mac80211_hwsim.c
-@@ -3004,15 +3004,19 @@ static void mac80211_hwsim_he_capab(stru
+@@ -3008,15 +3008,19 @@ static void mac80211_hwsim_he_capab(stru
  {
  	u16 n_iftype_data;
  
@@ -34,7 +34,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		return;
  	}
  
-@@ -3302,6 +3306,12 @@ static int mac80211_hwsim_new_radio(stru
+@@ -3306,6 +3310,12 @@ static int mac80211_hwsim_new_radio(stru
  			sband->vht_cap.vht_mcs.tx_mcs_map =
  				sband->vht_cap.vht_mcs.rx_mcs_map;
  			break;
@@ -47,7 +47,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		case NL80211_BAND_S1GHZ:
  			memcpy(&sband->s1g_cap, &hwsim_s1g_cap,
  			       sizeof(sband->s1g_cap));
-@@ -3312,6 +3322,13 @@ static int mac80211_hwsim_new_radio(stru
+@@ -3316,6 +3326,13 @@ static int mac80211_hwsim_new_radio(stru
  			continue;
  		}
  
@@ -61,7 +61,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		sband->ht_cap.ht_supported = true;
  		sband->ht_cap.cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
  				    IEEE80211_HT_CAP_GRN_FLD |
-@@ -3325,10 +3342,6 @@ static int mac80211_hwsim_new_radio(stru
+@@ -3329,10 +3346,6 @@ static int mac80211_hwsim_new_radio(stru
  		sband->ht_cap.mcs.rx_mask[0] = 0xff;
  		sband->ht_cap.mcs.rx_mask[1] = 0xff;
  		sband->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;

package/kernel/mac80211/patches/subsys/308-mac80211-add-support-for-.ndo_fill_forward_path.patch

@@ -69,7 +69,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  #endif /* __MAC80211_DRIVER_OPS */
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -1490,7 +1490,7 @@ struct ieee80211_local {
+@@ -1489,7 +1489,7 @@ struct ieee80211_local {
  };
  
  static inline struct ieee80211_sub_if_data *

package/kernel/mac80211/patches/subsys/319-mac80211-introduce-set_radar_offchan-callback.patch

@@ -40,7 +40,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  				     struct ieee80211_vif *vif,
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -4344,6 +4344,18 @@ out:
+@@ -4341,6 +4341,18 @@ out:
  	return err;
  }
  
@@ -59,7 +59,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  const struct cfg80211_ops mac80211_config_ops = {
  	.add_virtual_intf = ieee80211_add_iface,
  	.del_virtual_intf = ieee80211_del_iface,
-@@ -4448,4 +4460,5 @@ const struct cfg80211_ops mac80211_confi
+@@ -4445,4 +4457,5 @@ const struct cfg80211_ops mac80211_confi
  	.reset_tid_config = ieee80211_reset_tid_config,
  	.set_sar_specs = ieee80211_set_sar_specs,
  	.color_change = ieee80211_color_change,

package/kernel/mac80211/patches/subsys/320-cfg80211-rename-offchannel_chain-structs-to-backgrou.patch

@@ -156,7 +156,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	NUM_NL80211_EXT_FEATURES,
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -4345,15 +4345,15 @@ out:
+@@ -4342,15 +4342,15 @@ out:
  }
  
  static int
@@ -176,7 +176,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  const struct cfg80211_ops mac80211_config_ops = {
-@@ -4460,5 +4460,5 @@ const struct cfg80211_ops mac80211_confi
+@@ -4457,5 +4457,5 @@ const struct cfg80211_ops mac80211_confi
  	.reset_tid_config = ieee80211_reset_tid_config,
  	.set_sar_specs = ieee80211_set_sar_specs,
  	.color_change = ieee80211_color_change,

package/kernel/mac80211/patches/subsys/324-mac80211-MBSSID-beacon-handling-in-AP-mode.patch

@@ -195,7 +195,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  			return err;
  		}
  		*changed |= err;
-@@ -3463,8 +3528,11 @@ static int ieee80211_set_csa_beacon(stru
+@@ -3460,8 +3525,11 @@ static int ieee80211_set_csa_beacon(stru
  static void ieee80211_color_change_abort(struct ieee80211_sub_if_data  *sdata)
  {
  	sdata->vif.color_change_active = false;
@@ -209,7 +209,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  	cfg80211_color_change_aborted_notify(sdata->dev);
  }
-@@ -4202,8 +4270,11 @@ ieee80211_set_after_color_change_beacon(
+@@ -4199,8 +4267,11 @@ ieee80211_set_after_color_change_beacon(
  
  		ret = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon,
  					      NULL, NULL);
@@ -223,7 +223,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  		if (ret < 0)
  			return ret;
-@@ -4246,7 +4317,11 @@ ieee80211_set_color_change_beacon(struct
+@@ -4243,7 +4314,11 @@ ieee80211_set_color_change_beacon(struct
  		err = ieee80211_assign_beacon(sdata, &params->beacon_color_change,
  					      NULL, &color_change);
  		if (err < 0) {
@@ -246,7 +246,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	struct rcu_head rcu_head;
  };
  
-@@ -1083,6 +1084,20 @@ ieee80211_vif_get_shift(struct ieee80211
+@@ -1082,6 +1083,20 @@ ieee80211_vif_get_shift(struct ieee80211
  	return shift;
  }
  

package/kernel/mac80211/patches/subsys/330-mac80211-switch-airtime-fairness-back-to-deficit-rou.patch

@@ -327,7 +327,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -863,16 +863,20 @@ enum txq_info_flags {
+@@ -862,16 +862,20 @@ enum txq_info_flags {
   * @def_flow: used as a fallback flow when a packet destined to @tin hashes to
   *	a fq_flow which is already owned by a different tin
   * @def_cvars: codel vars for @def_flow
@@ -350,7 +350,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	unsigned long flags;
  
  	/* keep last! */
-@@ -949,8 +953,6 @@ struct ieee80211_sub_if_data {
+@@ -948,8 +952,6 @@ struct ieee80211_sub_if_data {
  	struct ieee80211_tx_queue_params tx_conf[IEEE80211_NUM_ACS];
  	struct mac80211_qos_map __rcu *qos_map;
  
@@ -359,7 +359,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	struct work_struct csa_finalize_work;
  	bool csa_block_tx; /* write-protected by sdata_lock and local->mtx */
  	struct cfg80211_chan_def csa_chandef;
-@@ -1185,44 +1187,6 @@ enum mac80211_scan_state {
+@@ -1184,44 +1186,6 @@ enum mac80211_scan_state {
  	SCAN_ABORT,
  };
  
@@ -404,7 +404,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  DECLARE_STATIC_KEY_FALSE(aql_disable);
  
  struct ieee80211_local {
-@@ -1236,8 +1200,13 @@ struct ieee80211_local {
+@@ -1235,8 +1199,13 @@ struct ieee80211_local {
  	struct codel_params cparams;
  
  	/* protects active_txqs and txqi->schedule_order */
@@ -419,7 +419,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	u32 aql_threshold;
  	atomic_t aql_total_pending_airtime;
  
-@@ -1654,125 +1623,6 @@ static inline bool txq_has_queue(struct
+@@ -1660,125 +1629,6 @@ static inline bool txq_has_queue(struct
  	return !(skb_queue_empty(&txqi->frags) && !txqi->tin.backlog_packets);
  }
  
@@ -545,7 +545,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr)
  {
  	return ether_addr_equal(raddr, addr) ||
-@@ -2018,14 +1868,6 @@ int ieee80211_tx_control_port(struct wip
+@@ -2024,14 +1874,6 @@ int ieee80211_tx_control_port(struct wip
  			      u64 *cookie);
  int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev,
  			      const u8 *buf, size_t len);
@@ -562,7 +562,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
 --- a/net/mac80211/iface.c
 +++ b/net/mac80211/iface.c
-@@ -2190,9 +2190,6 @@ int ieee80211_if_add(struct ieee80211_lo
+@@ -2192,9 +2192,6 @@ int ieee80211_if_add(struct ieee80211_lo
  		}
  	}
  

package/kernel/mac80211/patches/subsys/334-mac80211-add-a-per-PHY-AQL-limit-to-improve-fairness.patch

@@ -15,7 +15,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -1216,6 +1216,7 @@ struct ieee80211_local {
+@@ -1215,6 +1215,7 @@ struct ieee80211_local {
  	u32 aql_txq_limit_high[IEEE80211_NUM_ACS];
  	u32 aql_threshold;
  	atomic_t aql_total_pending_airtime;

package/kernel/mac80211/patches/subsys/343-wifi-mac80211-fix-decap-offload-for-stations-on-AP_V.patch

@@ -0,0 +1,37 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 28 Sep 2022 13:50:34 +0200
+Subject: [PATCH] wifi: mac80211: fix decap offload for stations on AP_VLAN
+ interfaces
+
+Since AP_VLAN interfaces are not passed to the driver, check offload_flags
+on the bss vif instead.
+
+Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com>
+Fixes: 80a915ec4427 ("mac80211: add rx decapsulation offload support")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -4267,6 +4267,7 @@ void ieee80211_check_fast_rx(struct sta_
+ 		.vif_type = sdata->vif.type,
+ 		.control_port_protocol = sdata->control_port_protocol,
+ 	}, *old, *new = NULL;
++	u32 offload_flags;
+ 	bool set_offload = false;
+ 	bool assign = false;
+ 	bool offload;
+@@ -4382,10 +4383,10 @@ void ieee80211_check_fast_rx(struct sta_
+ 	if (assign)
+ 		new = kmemdup(&fastrx, sizeof(fastrx), GFP_KERNEL);
+ 
+-	offload = assign &&
+-		  (sdata->vif.offload_flags & IEEE80211_OFFLOAD_DECAP_ENABLED);
++	offload_flags = get_bss_sdata(sdata)->vif.offload_flags;
++	offload = offload_flags & IEEE80211_OFFLOAD_DECAP_ENABLED;
+ 
+-	if (offload)
++	if (assign && offload)
+ 		set_offload = !test_and_set_sta_flag(sta, WLAN_STA_DECAP_OFFLOAD);
+ 	else
+ 		set_offload = test_and_clear_sta_flag(sta, WLAN_STA_DECAP_OFFLOAD);

package/kernel/mac80211/patches/subsys/344-wifi-cfg80211-fix-ieee80211_data_to_8023_exthdr-hand.patch

@@ -0,0 +1,99 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Oct 2022 10:54:47 +0200
+Subject: [PATCH] wifi: cfg80211: fix ieee80211_data_to_8023_exthdr
+ handling of small packets
+
+STP topology change notification packets only have a payload of 7 bytes,
+so they get dropped due to the skb->len < hdrlen + 8 check.
+Fix this by removing skb->len based checks and instead check the return code
+on the skb_copy_bits calls.
+
+Fixes: 2d1c304cb2d5 ("cfg80211: add function for 802.3 conversion with separate output buffer")
+Reported-by: Chad Monroe <chad.monroe@smartrg.com>
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/wireless/util.c
++++ b/net/wireless/util.c
+@@ -557,7 +557,7 @@ int ieee80211_data_to_8023_exthdr(struct
+ 		return -1;
+ 
+ 	hdrlen = ieee80211_hdrlen(hdr->frame_control) + data_offset;
+-	if (skb->len < hdrlen + 8)
++	if (skb->len < hdrlen)
+ 		return -1;
+ 
+ 	/* convert IEEE 802.11 header + possible LLC headers into Ethernet
+@@ -572,8 +572,9 @@ int ieee80211_data_to_8023_exthdr(struct
+ 	memcpy(tmp.h_dest, ieee80211_get_DA(hdr), ETH_ALEN);
+ 	memcpy(tmp.h_source, ieee80211_get_SA(hdr), ETH_ALEN);
+ 
+-	if (iftype == NL80211_IFTYPE_MESH_POINT)
+-		skb_copy_bits(skb, hdrlen, &mesh_flags, 1);
++	if (iftype == NL80211_IFTYPE_MESH_POINT &&
++	    skb_copy_bits(skb, hdrlen, &mesh_flags, 1) < 0)
++		return -1;
+ 
+ 	mesh_flags &= MESH_FLAGS_AE;
+ 
+@@ -593,11 +594,12 @@ int ieee80211_data_to_8023_exthdr(struct
+ 		if (iftype == NL80211_IFTYPE_MESH_POINT) {
+ 			if (mesh_flags == MESH_FLAGS_AE_A4)
+ 				return -1;
+-			if (mesh_flags == MESH_FLAGS_AE_A5_A6) {
+-				skb_copy_bits(skb, hdrlen +
+-					offsetof(struct ieee80211s_hdr, eaddr1),
+-					tmp.h_dest, 2 * ETH_ALEN);
+-			}
++			if (mesh_flags == MESH_FLAGS_AE_A5_A6 &&
++			    skb_copy_bits(skb, hdrlen +
++					  offsetof(struct ieee80211s_hdr, eaddr1),
++					  tmp.h_dest, 2 * ETH_ALEN) < 0)
++				return -1;
++
+ 			hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags);
+ 		}
+ 		break;
+@@ -611,10 +613,11 @@ int ieee80211_data_to_8023_exthdr(struct
+ 		if (iftype == NL80211_IFTYPE_MESH_POINT) {
+ 			if (mesh_flags == MESH_FLAGS_AE_A5_A6)
+ 				return -1;
+-			if (mesh_flags == MESH_FLAGS_AE_A4)
+-				skb_copy_bits(skb, hdrlen +
+-					offsetof(struct ieee80211s_hdr, eaddr1),
+-					tmp.h_source, ETH_ALEN);
++			if (mesh_flags == MESH_FLAGS_AE_A4 &&
++			    skb_copy_bits(skb, hdrlen +
++					  offsetof(struct ieee80211s_hdr, eaddr1),
++					  tmp.h_source, ETH_ALEN) < 0)
++				return -1;
+ 			hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags);
+ 		}
+ 		break;
+@@ -626,18 +629,18 @@ int ieee80211_data_to_8023_exthdr(struct
+ 		break;
+ 	}
+ 
+-	skb_copy_bits(skb, hdrlen, &payload, sizeof(payload));
+-	tmp.h_proto = payload.proto;
+-
+-	if (likely((!is_amsdu && ether_addr_equal(payload.hdr, rfc1042_header) &&
+-		    tmp.h_proto != htons(ETH_P_AARP) &&
+-		    tmp.h_proto != htons(ETH_P_IPX)) ||
+-		   ether_addr_equal(payload.hdr, bridge_tunnel_header)))
++	if (likely(skb_copy_bits(skb, hdrlen, &payload, sizeof(payload)) == 0 &&
++	           ((!is_amsdu && ether_addr_equal(payload.hdr, rfc1042_header) &&
++		     payload.proto != htons(ETH_P_AARP) &&
++		     payload.proto != htons(ETH_P_IPX)) ||
++		    ether_addr_equal(payload.hdr, bridge_tunnel_header)))) {
+ 		/* remove RFC1042 or Bridge-Tunnel encapsulation and
+ 		 * replace EtherType */
+ 		hdrlen += ETH_ALEN + 2;
+-	else
++		tmp.h_proto = payload.proto;
++	} else {
+ 		tmp.h_proto = htons(skb->len - hdrlen);
++	}
+ 
+ 	pskb_pull(skb, hdrlen);
+ 

package/kernel/mac80211/patches/subsys/345-wifi-mac80211-do-not-drop-packets-smaller-than-the-L.patch

@@ -0,0 +1,25 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Oct 2022 10:58:26 +0200
+Subject: [PATCH] wifi: mac80211: do not drop packets smaller than the
+ LLC-SNAP header on fast-rx
+
+Since STP TCN frames are only 7 bytes, the pskb_may_pull call returns an error.
+Instead of dropping those packets, bump them back to the slow path for proper
+processing.
+
+Fixes: 49ddf8e6e234 ("mac80211: add fast-rx path")
+Reported-by: Chad Monroe <chad.monroe@smartrg.com>
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/rx.c
++++ b/net/mac80211/rx.c
+@@ -4603,7 +4603,7 @@ static bool ieee80211_invoke_fast_rx(str
+ 
+ 	if (!(status->rx_flags & IEEE80211_RX_AMSDU)) {
+ 		if (!pskb_may_pull(skb, snap_offs + sizeof(*payload)))
+-			goto drop;
++			return false;
+ 
+ 		payload = (void *)(skb->data + snap_offs);
+ 

package/kernel/mac80211/patches/subsys/346-v6.0-wifi-mac80211-fix-mesh-airtime-link-metric-estimatin.patch

@@ -0,0 +1,36 @@
+From: Aditya Kumar Singh <quic_adisi@quicinc.com>
+Date: Fri, 1 Jul 2022 19:06:11 +0530
+Subject: [PATCH] wifi: mac80211: fix mesh airtime link metric estimating
+
+ieee80211s_update_metric function uses sta_set_rate_info_tx
+function to get struct rate_info data from ieee80211_tx_rate
+struct, present in ieee80211_sta->deflink.tx_stats. However,
+drivers can skip tx rate calculation by setting rate idx as
+-1. Such drivers provides rate_info directly and hence
+ieee80211s metric is updated incorrectly since ieee80211_tx_rate
+has inconsistent data.
+
+Add fix to use rate_info directly if present instead of
+sta_set_rate_info_tx for updating ieee80211s metric.
+
+Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
+Link: https://lore.kernel.org/r/20220701133611.544-1-quic_adisi@quicinc.com
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/mac80211/mesh_hwmp.c
++++ b/net/mac80211/mesh_hwmp.c
+@@ -310,7 +310,12 @@ void ieee80211s_update_metric(struct iee
+ 			LINK_FAIL_THRESH)
+ 		mesh_plink_broken(sta);
+ 
+-	sta_set_rate_info_tx(sta, &sta->tx_stats.last_rate, &rinfo);
++	/* use rate info set by the driver directly if present */
++	if (st->rate)
++		rinfo = sta->tx_stats.last_rate_info;
++	else
++		sta_set_rate_info_tx(sta, &sta->tx_stats.last_rate, &rinfo);
++
+ 	ewma_mesh_tx_rate_avg_add(&sta->mesh->tx_rate_avg,
+ 				  cfg80211_calculate_bitrate(&rinfo));
+ }

package/kernel/mac80211/patches/subsys/347-wifi-ieee80211-correctly-mark-FTM-frames-non-buffera.patch

@@ -0,0 +1,134 @@
+From: Johannes Berg <johannes.berg@intel.com>
+Date: Wed, 29 Mar 2023 16:46:26 +0200
+Subject: [PATCH] wifi: ieee80211: correctly mark FTM frames non-bufferable
+
+The checks of whether or not a frame is bufferable were not
+taking into account that some action frames aren't, such as
+FTM. Check this, which requires some changes to the function
+ieee80211_is_bufferable_mmpdu() since we need the whole skb
+for the checks now.
+
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+Reviewed-by: Greenman, Gregory <gregory.greenman@intel.com>
+Reviewed-by: Peer, Ilan <ilan.peer@intel.com>
+---
+
+--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
++++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+@@ -551,8 +551,9 @@ static void iwl_mvm_skb_prepare_status(s
+ 
+ static int iwl_mvm_get_ctrl_vif_queue(struct iwl_mvm *mvm,
+ 				      struct ieee80211_tx_info *info,
+-				      struct ieee80211_hdr *hdr)
++				      struct sk_buff *skb)
+ {
++	struct ieee80211_hdr *hdr = (void *)skb->data;
+ 	struct iwl_mvm_vif *mvmvif =
+ 		iwl_mvm_vif_from_mac80211(info->control.vif);
+ 	__le16 fc = hdr->frame_control;
+@@ -571,7 +572,7 @@ static int iwl_mvm_get_ctrl_vif_queue(st
+ 		 * reason 7 ("Class 3 frame received from nonassociated STA").
+ 		 */
+ 		if (ieee80211_is_mgmt(fc) &&
+-		    (!ieee80211_is_bufferable_mmpdu(fc) ||
++		    (!ieee80211_is_bufferable_mmpdu(skb) ||
+ 		     ieee80211_is_deauth(fc) || ieee80211_is_disassoc(fc)))
+ 			return mvm->probe_queue;
+ 
+@@ -689,7 +690,7 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mv
+ 			else
+ 				sta_id = mvmvif->mcast_sta.sta_id;
+ 
+-			queue = iwl_mvm_get_ctrl_vif_queue(mvm, &info, hdr);
++			queue = iwl_mvm_get_ctrl_vif_queue(mvm, &info, skb);
+ 		} else if (info.control.vif->type == NL80211_IFTYPE_MONITOR) {
+ 			queue = mvm->snif_queue;
+ 			sta_id = mvm->snif_sta.sta_id;
+--- a/include/linux/ieee80211.h
++++ b/include/linux/ieee80211.h
+@@ -738,20 +738,6 @@ static inline bool ieee80211_is_any_null
+ }
+ 
+ /**
+- * ieee80211_is_bufferable_mmpdu - check if frame is bufferable MMPDU
+- * @fc: frame control field in little-endian byteorder
+- */
+-static inline bool ieee80211_is_bufferable_mmpdu(__le16 fc)
+-{
+-	/* IEEE 802.11-2012, definition of "bufferable management frame";
+-	 * note that this ignores the IBSS special case. */
+-	return ieee80211_is_mgmt(fc) &&
+-	       (ieee80211_is_action(fc) ||
+-		ieee80211_is_disassoc(fc) ||
+-		ieee80211_is_deauth(fc));
+-}
+-
+-/**
+  * ieee80211_is_first_frag - check if IEEE80211_SCTL_FRAG is not set
+  * @seq_ctrl: frame sequence control bytes in little-endian byteorder
+  */
+@@ -3672,6 +3658,44 @@ static inline u8 *ieee80211_get_DA(struc
+ }
+ 
+ /**
++ * ieee80211_is_bufferable_mmpdu - check if frame is bufferable MMPDU
++ * @skb: the skb to check, starting with the 802.11 header
++ */
++static inline bool ieee80211_is_bufferable_mmpdu(struct sk_buff *skb)
++{
++	struct ieee80211_mgmt *mgmt = (void *)skb->data;
++	__le16 fc = mgmt->frame_control;
++
++	/*
++	 * IEEE 802.11 REVme D2.0 definition of bufferable MMPDU;
++	 * note that this ignores the IBSS special case.
++	 */
++	if (!ieee80211_is_mgmt(fc))
++		return false;
++
++	if (ieee80211_is_disassoc(fc) || ieee80211_is_deauth(fc))
++		return true;
++
++	if (!ieee80211_is_action(fc))
++		return false;
++
++	if (skb->len < offsetofend(typeof(*mgmt), u.action.u.ftm.action_code))
++		return true;
++
++	/* action frame - additionally check for non-bufferable FTM */
++
++	if (mgmt->u.action.category != WLAN_CATEGORY_PUBLIC &&
++	    mgmt->u.action.category != WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION)
++		return true;
++
++	if (mgmt->u.action.u.ftm.action_code == WLAN_PUB_ACTION_FTM_REQUEST ||
++	    mgmt->u.action.u.ftm.action_code == WLAN_PUB_ACTION_FTM)
++		return false;
++
++	return true;
++}
++
++/**
+  * _ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
+  * @hdr: the frame (buffer must include at least the first octet of payload)
+  */
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -487,7 +487,7 @@ ieee80211_tx_h_unicast_ps_buf(struct iee
+ 		int ac = skb_get_queue_mapping(tx->skb);
+ 
+ 		if (ieee80211_is_mgmt(hdr->frame_control) &&
+-		    !ieee80211_is_bufferable_mmpdu(hdr->frame_control)) {
++		    !ieee80211_is_bufferable_mmpdu(tx->skb)) {
+ 			info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
+ 			return TX_CONTINUE;
+ 		}
+@@ -1282,7 +1282,7 @@ static struct txq_info *ieee80211_get_tx
+ 	if (!(info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) &&
+ 	    unlikely(!ieee80211_is_data_present(hdr->frame_control))) {
+ 		if ((!ieee80211_is_mgmt(hdr->frame_control) ||
+-		     ieee80211_is_bufferable_mmpdu(hdr->frame_control) ||
++		     ieee80211_is_bufferable_mmpdu(skb) ||
+ 		     vif->type == NL80211_IFTYPE_STATION) &&
+ 		    sta && sta->uploaded) {
+ 			/*

package/kernel/mac80211/patches/subsys/348-wifi-mac80211-flush-queues-on-STA-removal.patch

@@ -0,0 +1,36 @@
+From: Johannes Berg <johannes.berg@intel.com>
+Date: Mon, 13 Mar 2023 11:42:12 +0100
+Subject: [PATCH] wifi: mac80211: flush queues on STA removal
+
+When we remove a station, we first make it unreachable,
+then we (must) remove its keys, and then remove the
+station itself. Depending on the hardware design, if
+we have hardware crypto at all, frames still sitting
+on hardware queues may then be transmitted without a
+valid key, possibly unencrypted or with a fixed key.
+
+Fix this by flushing the queues when removing stations
+so this cannot happen.
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+Reviewed-by: Greenman, Gregory <gregory.greenman@intel.com>
+---
+
+--- a/net/mac80211/sta_info.c
++++ b/net/mac80211/sta_info.c
+@@ -1070,6 +1070,14 @@ static void __sta_info_destroy_part2(str
+ 		WARN_ON_ONCE(ret);
+ 	}
+ 
++	/* Flush queues before removing keys, as that might remove them
++	 * from hardware, and then depending on the offload method, any
++	 * frames sitting on hardware queues might be sent out without
++	 * any encryption at all.
++	 */
++	if (local->ops->set_key)
++		ieee80211_flush_queues(local, sta->sdata, false);
++
+ 	/* now keys can no longer be reached */
+ 	ieee80211_free_sta_keys(local, sta);
+ 

package/kernel/mac80211/patches/subsys/349-wifi-iwlwifi-mvm-support-flush-on-AP-interfaces.patch

@@ -0,0 +1,34 @@
+From: Johannes Berg <johannes.berg@intel.com>
+Date: Mon, 13 Mar 2023 12:02:58 +0100
+Subject: [PATCH] wifi: iwlwifi: mvm: support flush on AP interfaces
+
+Support TX flush on AP interfaces so that we will do a
+proper flush for frames on the queue before keys are
+removed.
+
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+Reviewed-by: Greenman, Gregory <gregory.greenman@intel.com>
+---
+
+--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
++++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+@@ -4817,9 +4817,6 @@ static void iwl_mvm_mac_flush(struct iee
+ 		return;
+ 	}
+ 
+-	if (vif->type != NL80211_IFTYPE_STATION)
+-		return;
+-
+ 	/* Make sure we're done with the deferred traffic before flushing */
+ 	flush_work(&mvm->add_stream_wk);
+ 
+@@ -4837,9 +4834,6 @@ static void iwl_mvm_mac_flush(struct iee
+ 		if (mvmsta->vif != vif)
+ 			continue;
+ 
+-		/* make sure only TDLS peers or the AP are flushed */
+-		WARN_ON(i != mvmvif->ap_sta_id && !sta->tdls);
+-
+ 		if (drop) {
+ 			if (iwl_mvm_flush_sta(mvm, mvmsta, false))
+ 				IWL_ERR(mvm, "flush request fail\n");

package/kernel/mac80211/patches/subsys/350-wifi-mac80211-add-flush_sta-method.patch

@@ -0,0 +1,91 @@
+From: Johannes Berg <johannes.berg@intel.com>
+Date: Mon, 13 Mar 2023 11:53:51 +0100
+Subject: [PATCH] wifi: mac80211: add flush_sta method
+
+Some drivers like iwlwifi might have per-STA queues, so we
+may want to flush/drop just those queues rather than all
+when removing a station. Add a separate method for that.
+
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+Reviewed-by: Greenman, Gregory <gregory.greenman@intel.com>
+---
+
+--- a/include/net/mac80211.h
++++ b/include/net/mac80211.h
+@@ -3688,6 +3688,10 @@ struct ieee80211_prep_tx_info {
+  *	Note that vif can be NULL.
+  *	The callback can sleep.
+  *
++ * @flush_sta: Flush or drop all pending frames from the hardware queue(s) for
++ *	the given station, as it's about to be removed.
++ *	The callback can sleep.
++ *
+  * @channel_switch: Drivers that need (or want) to offload the channel
+  *	switch operation for CSAs received from the AP may implement this
+  *	callback. They must then call ieee80211_chswitch_done() to indicate
+@@ -4116,6 +4120,8 @@ struct ieee80211_ops {
+ #endif
+ 	void (*flush)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ 		      u32 queues, bool drop);
++	void (*flush_sta)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
++			  struct ieee80211_sta *sta);
+ 	void (*channel_switch)(struct ieee80211_hw *hw,
+ 			       struct ieee80211_vif *vif,
+ 			       struct ieee80211_channel_switch *ch_switch);
+--- a/net/mac80211/driver-ops.h
++++ b/net/mac80211/driver-ops.h
+@@ -639,6 +639,21 @@ static inline void drv_flush(struct ieee
+ 	trace_drv_return_void(local);
+ }
+ 
++static inline void drv_flush_sta(struct ieee80211_local *local,
++				 struct ieee80211_sub_if_data *sdata,
++				 struct sta_info *sta)
++{
++	might_sleep();
++
++	if (sdata && !check_sdata_in_driver(sdata))
++		return;
++
++	trace_drv_flush_sta(local, sdata, &sta->sta);
++	if (local->ops->flush_sta)
++		local->ops->flush_sta(&local->hw, &sdata->vif, &sta->sta);
++	trace_drv_return_void(local);
++}
++
+ static inline void drv_channel_switch(struct ieee80211_local *local,
+ 				      struct ieee80211_sub_if_data *sdata,
+ 				      struct ieee80211_channel_switch *ch_switch)
+--- a/net/mac80211/sta_info.c
++++ b/net/mac80211/sta_info.c
+@@ -1075,8 +1075,12 @@ static void __sta_info_destroy_part2(str
+ 	 * frames sitting on hardware queues might be sent out without
+ 	 * any encryption at all.
+ 	 */
+-	if (local->ops->set_key)
+-		ieee80211_flush_queues(local, sta->sdata, false);
++	if (local->ops->set_key) {
++		if (local->ops->flush_sta)
++			drv_flush_sta(local, sta->sdata, sta);
++		else
++			ieee80211_flush_queues(local, sta->sdata, false);
++	}
+ 
+ 	/* now keys can no longer be reached */
+ 	ieee80211_free_sta_keys(local, sta);
+--- a/net/mac80211/trace.h
++++ b/net/mac80211/trace.h
+@@ -1140,6 +1140,13 @@ TRACE_EVENT(drv_flush,
+ 	)
+ );
+ 
++DEFINE_EVENT(sta_event, drv_flush_sta,
++	TP_PROTO(struct ieee80211_local *local,
++		 struct ieee80211_sub_if_data *sdata,
++		 struct ieee80211_sta *sta),
++	TP_ARGS(local, sdata, sta)
++);
++
+ TRACE_EVENT(drv_channel_switch,
+ 	TP_PROTO(struct ieee80211_local *local,
+ 		 struct ieee80211_sub_if_data *sdata,

package/kernel/mac80211/patches/subsys/351-wifi-iwlwifi-mvm-support-new-flush_sta-method.patch

@@ -0,0 +1,53 @@
+From: Johannes Berg <johannes.berg@intel.com>
+Date: Mon, 13 Mar 2023 12:05:35 +0100
+Subject: [PATCH] wifi: iwlwifi: mvm: support new flush_sta method
+
+For iwlwifi this is simple to implement, and on newer hardware
+it's an improvement since we have per-station queues.
+
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+Reviewed-by: Greenman, Gregory <gregory.greenman@intel.com>
+---
+
+--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
++++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+@@ -4853,6 +4853,31 @@ static void iwl_mvm_mac_flush(struct iee
+ 		iwl_trans_wait_tx_queues_empty(mvm->trans, msk);
+ }
+ 
++static void iwl_mvm_mac_flush_sta(struct ieee80211_hw *hw,
++				  struct ieee80211_vif *vif,
++				  struct ieee80211_sta *sta)
++{
++	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
++	int i;
++
++	mutex_lock(&mvm->mutex);
++	for (i = 0; i < mvm->fw->ucode_capa.num_stations; i++) {
++		struct iwl_mvm_sta *mvmsta;
++		struct ieee80211_sta *tmp;
++
++		tmp = rcu_dereference_protected(mvm->fw_id_to_mac_id[i],
++						lockdep_is_held(&mvm->mutex));
++		if (tmp != sta)
++			continue;
++
++		mvmsta = iwl_mvm_sta_from_mac80211(sta);
++
++		if (iwl_mvm_flush_sta(mvm, mvmsta, false))
++			IWL_ERR(mvm, "flush request fail\n");
++	}
++	mutex_unlock(&mvm->mutex);
++}
++
+ static int iwl_mvm_mac_get_survey(struct ieee80211_hw *hw, int idx,
+ 				  struct survey_info *survey)
+ {
+@@ -5366,6 +5391,7 @@ const struct ieee80211_ops iwl_mvm_hw_op
+ 	.mgd_prepare_tx = iwl_mvm_mac_mgd_prepare_tx,
+ 	.mgd_protect_tdls_discover = iwl_mvm_mac_mgd_protect_tdls_discover,
+ 	.flush = iwl_mvm_mac_flush,
++	.flush_sta = iwl_mvm_mac_flush_sta,
+ 	.sched_scan_start = iwl_mvm_mac_sched_scan_start,
+ 	.sched_scan_stop = iwl_mvm_mac_sched_scan_stop,
+ 	.set_key = iwl_mvm_mac_set_key,

package/kernel/mac80211/patches/subsys/352-wifi-mac80211-fix-invalid-drv_sta_pre_rcu_remove-cal.patch

@@ -0,0 +1,25 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 24 Mar 2023 13:04:17 +0100
+Subject: [PATCH] wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for
+ non-uploaded sta
+
+Avoid potential data corruption issues caused by uninitialized driver
+private data structures.
+
+Reported-by: Brian Coverstone <brian@mainsequence.net>
+Fixes: 6a9d1b91f34d ("mac80211: add pre-RCU-sync sta removal driver operation")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/sta_info.c
++++ b/net/mac80211/sta_info.c
+@@ -1041,7 +1041,8 @@ static int __must_check __sta_info_destr
+ 	list_del_rcu(&sta->list);
+ 	sta->removed = true;
+ 
+-	drv_sta_pre_rcu_remove(local, sta->sdata, sta);
++	if (sta->uploaded)
++		drv_sta_pre_rcu_remove(local, sta->sdata, sta);
+ 
+ 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
+ 	    rcu_access_pointer(sdata->u.vlan.sta) == sta)

package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch

@@ -77,7 +77,7 @@
  static void ieee80211_rfkill_poll(struct wiphy *wiphy)
  {
  	struct ieee80211_local *local = wiphy_priv(wiphy);
-@@ -4516,6 +4529,7 @@ const struct cfg80211_ops mac80211_confi
+@@ -4513,6 +4526,7 @@ const struct cfg80211_ops mac80211_confi
  	.set_wiphy_params = ieee80211_set_wiphy_params,
  	.set_tx_power = ieee80211_set_tx_power,
  	.get_tx_power = ieee80211_get_tx_power,
@@ -87,7 +87,7 @@
  	CFG80211_TESTMODE_DUMP(ieee80211_testmode_dump)
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -1448,6 +1448,7 @@ struct ieee80211_local {
+@@ -1447,6 +1447,7 @@ struct ieee80211_local {
  	int dynamic_ps_forced_timeout;
  
  	int user_power_level; /* in dBm, for all interfaces */

package/kernel/mt76/Makefile

@@ -1,7 +1,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=mt76
-PKG_RELEASE=4
+PKG_RELEASE=5
 
 PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=
@@ -226,11 +226,22 @@ define KernelPackage/mt7915e
   AUTOLOAD:=$(call AutoProbe,mt7915e)
 endef
 
+define KernelPackage/mt7916-firmware
+  $(KernelPackage/mt76-default)
+  DEPENDS+=+kmod-mt7915e
+  TITLE:=MediaTek MT7916 firmware
+endef
+
+define KernelPackage/mt7921-firmware
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7921 firmware
+endef
+
 define KernelPackage/mt7921-common
   $(KernelPackage/mt76-default)
   TITLE:=MediaTek MT7615 wireless driver common code
   HIDDEN:=1
-  DEPENDS+=+kmod-mt76-connac +@DRIVER_11AX_SUPPORT
+  DEPENDS+=+kmod-mt76-connac +kmod-mt7921-firmware +@DRIVER_11AX_SUPPORT
   FILES:= $(PKG_BUILD_DIR)/mt7921/mt7921-common.ko
 endef
 
@@ -450,7 +461,16 @@ define KernelPackage/mt7915e/install
 		$(1)/lib/firmware/mediatek
 endef
 
-define KernelPackage/mt7921e/install
+define KernelPackage/mt7916-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7916_wa.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7916_wm.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7916_rom_patch.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt7921-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	cp \
 		$(PKG_BUILD_DIR)/firmware/WIFI_MT7961_patch_mcu_1_2_hdr.bin \
@@ -485,6 +505,8 @@ $(eval $(call KernelPackage,mt7663-usb-sdio))
 $(eval $(call KernelPackage,mt7663u))
 $(eval $(call KernelPackage,mt7663s))
 $(eval $(call KernelPackage,mt7915e))
+$(eval $(call KernelPackage,mt7916-firmware))
+$(eval $(call KernelPackage,mt7921-firmware))
 $(eval $(call KernelPackage,mt7921-common))
 $(eval $(call KernelPackage,mt7921u))
 $(eval $(call KernelPackage,mt7921s))

package/kernel/mt76/patches/100-aggregation-definitions.patch

@@ -0,0 +1,13 @@
+--- a/mt7915/init.c
++++ b/mt7915/init.c
+@@ -327,8 +327,8 @@ mt7915_init_wiphy(struct ieee80211_hw *h
+ 	struct mt7915_dev *dev = phy->dev;
+ 
+ 	hw->queues = 4;
+-	hw->max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
+-	hw->max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
++	hw->max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF_HE;
++	hw->max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF_HE;
+ 	hw->netdev_features = NETIF_F_RXCSUM;
+ 
+ 	hw->radiotap_timestamp.units_pos =

package/kernel/mt76/patches/110-api_update.patch

@@ -0,0 +1,11 @@
+--- a/tx.c
++++ b/tx.c
+@@ -325,7 +325,7 @@ mt76_tx(struct mt76_phy *phy, struct iee
+ 	if ((dev->drv->drv_flags & MT_DRV_HW_MGMT_TXQ) &&
+ 	    !(info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) &&
+ 	    !ieee80211_is_data(hdr->frame_control) &&
+-	    !ieee80211_is_bufferable_mmpdu(hdr->frame_control)) {
++	    !ieee80211_is_bufferable_mmpdu(skb)) {
+ 		qid = MT_TXQ_PSD;
+ 	}
+ 

package/kernel/mt76/patches/120-wifi-mt76-ignore-key-disable-commands.patch

@@ -0,0 +1,301 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 22 Mar 2023 10:17:49 +0100
+Subject: [PATCH] wifi: mt76: ignore key disable commands
+
+This helps avoid cleartext leakage of already queued or powersave buffered
+packets, when a reassoc triggers the key deletion.
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/mt7603/main.c
++++ b/mt7603/main.c
+@@ -512,15 +512,15 @@ mt7603_set_key(struct ieee80211_hw *hw,
+ 	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+ 		return -EOPNOTSUPP;
+ 
+-	if (cmd == SET_KEY) {
+-		key->hw_key_idx = wcid->idx;
+-		wcid->hw_key_idx = idx;
+-	} else {
++	if (cmd != SET_KEY) {
+ 		if (idx == wcid->hw_key_idx)
+ 			wcid->hw_key_idx = -1;
+ 
+-		key = NULL;
++		return 0;
+ 	}
++
++	key->hw_key_idx = wcid->idx;
++	wcid->hw_key_idx = idx;
+ 	mt76_wcid_key_setup(&dev->mt76, wcid, key);
+ 
+ 	return mt7603_wtbl_set_key(dev, wcid->idx, key);
+--- a/mt7615/mac.c
++++ b/mt7615/mac.c
+@@ -1178,8 +1178,7 @@ EXPORT_SYMBOL_GPL(mt7615_mac_set_rates);
+ static int
+ mt7615_mac_wtbl_update_key(struct mt7615_dev *dev, struct mt76_wcid *wcid,
+ 			   struct ieee80211_key_conf *key,
+-			   enum mt76_cipher_type cipher, u16 cipher_mask,
+-			   enum set_key_cmd cmd)
++			   enum mt76_cipher_type cipher, u16 cipher_mask)
+ {
+ 	u32 addr = mt7615_mac_wtbl_addr(dev, wcid->idx) + 30 * 4;
+ 	u8 data[32] = {};
+@@ -1188,27 +1187,18 @@ mt7615_mac_wtbl_update_key(struct mt7615
+ 		return -EINVAL;
+ 
+ 	mt76_rr_copy(dev, addr, data, sizeof(data));
+-	if (cmd == SET_KEY) {
+-		if (cipher == MT_CIPHER_TKIP) {
+-			/* Rx/Tx MIC keys are swapped */
+-			memcpy(data, key->key, 16);
+-			memcpy(data + 16, key->key + 24, 8);
+-			memcpy(data + 24, key->key + 16, 8);
+-		} else {
+-			if (cipher_mask == BIT(cipher))
+-				memcpy(data, key->key, key->keylen);
+-			else if (cipher != MT_CIPHER_BIP_CMAC_128)
+-				memcpy(data, key->key, 16);
+-			if (cipher == MT_CIPHER_BIP_CMAC_128)
+-				memcpy(data + 16, key->key, 16);
+-		}
++	if (cipher == MT_CIPHER_TKIP) {
++		/* Rx/Tx MIC keys are swapped */
++		memcpy(data, key->key, 16);
++		memcpy(data + 16, key->key + 24, 8);
++		memcpy(data + 24, key->key + 16, 8);
+ 	} else {
++		if (cipher_mask == BIT(cipher))
++			memcpy(data, key->key, key->keylen);
++		else if (cipher != MT_CIPHER_BIP_CMAC_128)
++			memcpy(data, key->key, 16);
+ 		if (cipher == MT_CIPHER_BIP_CMAC_128)
+-			memset(data + 16, 0, 16);
+-		else if (cipher_mask)
+-			memset(data, 0, 16);
+-		if (!cipher_mask)
+-			memset(data, 0, sizeof(data));
++			memcpy(data + 16, key->key, 16);
+ 	}
+ 
+ 	mt76_wr_copy(dev, addr, data, sizeof(data));
+@@ -1219,7 +1209,7 @@ mt7615_mac_wtbl_update_key(struct mt7615
+ static int
+ mt7615_mac_wtbl_update_pk(struct mt7615_dev *dev, struct mt76_wcid *wcid,
+ 			  enum mt76_cipher_type cipher, u16 cipher_mask,
+-			  int keyidx, enum set_key_cmd cmd)
++			  int keyidx)
+ {
+ 	u32 addr = mt7615_mac_wtbl_addr(dev, wcid->idx), w0, w1;
+ 
+@@ -1238,9 +1228,7 @@ mt7615_mac_wtbl_update_pk(struct mt7615_
+ 	else
+ 		w0 &= ~MT_WTBL_W0_RX_IK_VALID;
+ 
+-	if (cmd == SET_KEY &&
+-	    (cipher != MT_CIPHER_BIP_CMAC_128 ||
+-	     cipher_mask == BIT(cipher))) {
++	if (cipher != MT_CIPHER_BIP_CMAC_128 || cipher_mask == BIT(cipher)) {
+ 		w0 &= ~MT_WTBL_W0_KEY_IDX;
+ 		w0 |= FIELD_PREP(MT_WTBL_W0_KEY_IDX, keyidx);
+ 	}
+@@ -1257,19 +1245,10 @@ mt7615_mac_wtbl_update_pk(struct mt7615_
+ 
+ static void
+ mt7615_mac_wtbl_update_cipher(struct mt7615_dev *dev, struct mt76_wcid *wcid,
+-			      enum mt76_cipher_type cipher, u16 cipher_mask,
+-			      enum set_key_cmd cmd)
++			      enum mt76_cipher_type cipher, u16 cipher_mask)
+ {
+ 	u32 addr = mt7615_mac_wtbl_addr(dev, wcid->idx);
+ 
+-	if (!cipher_mask) {
+-		mt76_clear(dev, addr + 2 * 4, MT_WTBL_W2_KEY_TYPE);
+-		return;
+-	}
+-
+-	if (cmd != SET_KEY)
+-		return;
+-
+ 	if (cipher == MT_CIPHER_BIP_CMAC_128 &&
+ 	    cipher_mask & ~BIT(MT_CIPHER_BIP_CMAC_128))
+ 		return;
+@@ -1280,8 +1259,7 @@ mt7615_mac_wtbl_update_cipher(struct mt7
+ 
+ int __mt7615_mac_wtbl_set_key(struct mt7615_dev *dev,
+ 			      struct mt76_wcid *wcid,
+-			      struct ieee80211_key_conf *key,
+-			      enum set_key_cmd cmd)
++			      struct ieee80211_key_conf *key)
+ {
+ 	enum mt76_cipher_type cipher;
+ 	u16 cipher_mask = wcid->cipher;
+@@ -1291,19 +1269,14 @@ int __mt7615_mac_wtbl_set_key(struct mt7
+ 	if (cipher == MT_CIPHER_NONE)
+ 		return -EOPNOTSUPP;
+ 
+-	if (cmd == SET_KEY)
+-		cipher_mask |= BIT(cipher);
+-	else
+-		cipher_mask &= ~BIT(cipher);
+-
+-	mt7615_mac_wtbl_update_cipher(dev, wcid, cipher, cipher_mask, cmd);
+-	err = mt7615_mac_wtbl_update_key(dev, wcid, key, cipher, cipher_mask,
+-					 cmd);
++	cipher_mask |= BIT(cipher);
++	mt7615_mac_wtbl_update_cipher(dev, wcid, cipher, cipher_mask);
++	err = mt7615_mac_wtbl_update_key(dev, wcid, key, cipher, cipher_mask);
+ 	if (err < 0)
+ 		return err;
+ 
+ 	err = mt7615_mac_wtbl_update_pk(dev, wcid, cipher, cipher_mask,
+-					key->keyidx, cmd);
++					key->keyidx);
+ 	if (err < 0)
+ 		return err;
+ 
+@@ -1314,13 +1287,12 @@ int __mt7615_mac_wtbl_set_key(struct mt7
+ 
+ int mt7615_mac_wtbl_set_key(struct mt7615_dev *dev,
+ 			    struct mt76_wcid *wcid,
+-			    struct ieee80211_key_conf *key,
+-			    enum set_key_cmd cmd)
++			    struct ieee80211_key_conf *key)
+ {
+ 	int err;
+ 
+ 	spin_lock_bh(&dev->mt76.lock);
+-	err = __mt7615_mac_wtbl_set_key(dev, wcid, key, cmd);
++	err = __mt7615_mac_wtbl_set_key(dev, wcid, key);
+ 	spin_unlock_bh(&dev->mt76.lock);
+ 
+ 	return err;
+--- a/mt7615/main.c
++++ b/mt7615/main.c
+@@ -391,18 +391,17 @@ static int mt7615_set_key(struct ieee802
+ 
+ 	if (cmd == SET_KEY)
+ 		*wcid_keyidx = idx;
+-	else if (idx == *wcid_keyidx)
+-		*wcid_keyidx = -1;
+-	else
++	else {
++		if (idx == *wcid_keyidx)
++			*wcid_keyidx = -1;
+ 		goto out;
++	}
+ 
+-	mt76_wcid_key_setup(&dev->mt76, wcid,
+-			    cmd == SET_KEY ? key : NULL);
+-
++	mt76_wcid_key_setup(&dev->mt76, wcid, key);
+ 	if (mt76_is_mmio(&dev->mt76))
+-		err = mt7615_mac_wtbl_set_key(dev, wcid, key, cmd);
++		err = mt7615_mac_wtbl_set_key(dev, wcid, key);
+ 	else
+-		err = __mt7615_mac_wtbl_set_key(dev, wcid, key, cmd);
++		err = __mt7615_mac_wtbl_set_key(dev, wcid, key);
+ 
+ out:
+ 	mt7615_mutex_release(dev);
+--- a/mt7615/mt7615.h
++++ b/mt7615/mt7615.h
+@@ -482,11 +482,9 @@ int mt7615_mac_write_txwi(struct mt7615_
+ void mt7615_mac_set_timing(struct mt7615_phy *phy);
+ int __mt7615_mac_wtbl_set_key(struct mt7615_dev *dev,
+ 			      struct mt76_wcid *wcid,
+-			      struct ieee80211_key_conf *key,
+-			      enum set_key_cmd cmd);
++			      struct ieee80211_key_conf *key);
+ int mt7615_mac_wtbl_set_key(struct mt7615_dev *dev, struct mt76_wcid *wcid,
+-			    struct ieee80211_key_conf *key,
+-			    enum set_key_cmd cmd);
++			    struct ieee80211_key_conf *key);
+ void mt7615_mac_reset_work(struct work_struct *work);
+ u32 mt7615_mac_get_sta_tid_sn(struct mt7615_dev *dev, int wcid, u8 tid);
+ 
+--- a/mt76x02_util.c
++++ b/mt76x02_util.c
+@@ -455,20 +455,20 @@ int mt76x02_set_key(struct ieee80211_hw
+ 	msta = sta ? (struct mt76x02_sta *)sta->drv_priv : NULL;
+ 	wcid = msta ? &msta->wcid : &mvif->group_wcid;
+ 
+-	if (cmd == SET_KEY) {
+-		key->hw_key_idx = wcid->idx;
+-		wcid->hw_key_idx = idx;
+-		if (key->flags & IEEE80211_KEY_FLAG_RX_MGMT) {
+-			key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
+-			wcid->sw_iv = true;
+-		}
+-	} else {
++	if (cmd != SET_KEY) {
+ 		if (idx == wcid->hw_key_idx) {
+ 			wcid->hw_key_idx = -1;
+ 			wcid->sw_iv = false;
+ 		}
+ 
+-		key = NULL;
++		return 0;
++	}
++
++	key->hw_key_idx = wcid->idx;
++	wcid->hw_key_idx = idx;
++	if (key->flags & IEEE80211_KEY_FLAG_RX_MGMT) {
++		key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
++		wcid->sw_iv = true;
+ 	}
+ 	mt76_wcid_key_setup(&dev->mt76, wcid, key);
+ 
+--- a/mt7915/main.c
++++ b/mt7915/main.c
+@@ -387,16 +387,15 @@ static int mt7915_set_key(struct ieee802
+ 		mt7915_mcu_add_bss_info(phy, vif, true);
+ 	}
+ 
+-	if (cmd == SET_KEY)
++	if (cmd == SET_KEY) {
+ 		*wcid_keyidx = idx;
+-	else if (idx == *wcid_keyidx)
+-		*wcid_keyidx = -1;
+-	else
++	} else {
++		if (idx == *wcid_keyidx)
++			*wcid_keyidx = -1;
+ 		goto out;
++	}
+ 
+-	mt76_wcid_key_setup(&dev->mt76, wcid,
+-			    cmd == SET_KEY ? key : NULL);
+-
++	mt76_wcid_key_setup(&dev->mt76, wcid, key);
+ 	err = mt76_connac_mcu_add_key(&dev->mt76, vif, &msta->bip,
+ 				      key, MCU_EXT_CMD(STA_REC_UPDATE),
+ 				      &msta->wcid, cmd);
+--- a/mt7921/main.c
++++ b/mt7921/main.c
+@@ -463,16 +463,15 @@ static int mt7921_set_key(struct ieee802
+ 
+ 	mt7921_mutex_acquire(dev);
+ 
+-	if (cmd == SET_KEY)
++	if (cmd == SET_KEY) {
+ 		*wcid_keyidx = idx;
+-	else if (idx == *wcid_keyidx)
+-		*wcid_keyidx = -1;
+-	else
++	} else {
++		if (idx == *wcid_keyidx)
++			*wcid_keyidx = -1;
+ 		goto out;
++	}
+ 
+-	mt76_wcid_key_setup(&dev->mt76, wcid,
+-			    cmd == SET_KEY ? key : NULL);
+-
++	mt76_wcid_key_setup(&dev->mt76, wcid, key);
+ 	err = mt76_connac_mcu_add_key(&dev->mt76, vif, &msta->bip,
+ 				      key, MCU_UNI_CMD(STA_REC_UPDATE),
+ 				      &msta->wcid, cmd);