OpenWrt v23.05.4: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

.gitignore

@@ -14,6 +14,7 @@
 /feeds
 /feeds.conf
 /files
+/target/linux/feeds
 /overlay
 /package/feeds
 /package/openwrt-packages

Makefile

@@ -40,6 +40,9 @@ else
   include tools/Makefile
   include toolchain/Makefile
 
+# Include the test suite Makefile if it exists
+-include tests/Makefile
+
 $(toolchain/stamp-compile): $(tools/stamp-compile) $(if $(CONFIG_BUILDBOT),toolchain_rebuild_check)
 $(target/stamp-compile): $(toolchain/stamp-compile) $(tools/stamp-compile) $(BUILD_DIR)/.prepared
 $(package/stamp-compile): $(target/stamp-compile) $(package/stamp-cleanup)

config/Config-images.in

@@ -127,6 +127,7 @@ menu "Target Images"
 		config TARGET_EXT4_JOURNAL
 			bool "Create a journaling filesystem"
 			depends on TARGET_ROOTFS_EXT4FS
+			default y
 			help
 			  Create an ext4 filesystem with a journal.
 

config/Config-kernel.in

@@ -157,16 +157,6 @@ config KERNEL_KASAN
 	  Currently CONFIG_KASAN doesn't work with CONFIG_DEBUG_SLAB
 	  (the resulting kernel does not boot).
 
-config KERNEL_KASAN_EXTRA
-	bool "KAsan: extra checks"
-	depends on KERNEL_KASAN && KERNEL_DEBUG_KERNEL
-	help
-	  This enables further checks in the kernel address sanitizer, for now
-	  it only includes the address-use-after-scope check that can lead
-	  to excessive kernel stack usage, frame size warnings and longer
-	  compile time.
-	  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 has more
-
 config KERNEL_KASAN_VMALLOC
 	bool "Back mappings in vmalloc space with real shadow memory"
 	depends on KERNEL_KASAN
@@ -1340,3 +1330,17 @@ config KERNEL_UBIFS_FS_SECURITY
 
 config KERNEL_JFFS2_FS_SECURITY
 	bool "JFFS2 Security Labels"
+
+config KERNEL_WERROR
+	bool "Compile the kernel with warnings as errors"
+	help
+	  A kernel build should not cause any compiler warnings, and this
+	  enables the '-Werror' (for C) and '-Dwarnings' (for Rust) flags
+	  to enforce that rule by default. Certain warnings from other tools
+	  such as the linker may be upgraded to errors with this option as
+	  well.
+
+	  However, if you have a new (or very old) compiler or linker with odd
+	  and unusual warnings, or you have some architecture with problems,
+	  you may need to disable this config option in order to
+	  successfully build the kernel.

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://git.openwrt.org/feed/packages.git^8e3a1824645f5e73ec44c897ac0755c53fb4a1f8
-src-git luci https://git.openwrt.org/project/luci.git^7739e9f5b03b830f51d53c384be4baef95054cb3
-src-git routing https://git.openwrt.org/feed/routing.git^83ef3784a9092cfd0a900cc28e2ed4e13671d667
-src-git telephony https://git.openwrt.org/feed/telephony.git^9746ae8f964e18f04b64fbe1956366954ff223f8
+src-git packages https://git.openwrt.org/feed/packages.git^89955ee711d92e6fb6db7dde9d9d7eb06841acdb
+src-git luci https://git.openwrt.org/project/luci.git^85dec609ab12eee92601d492e4d472b01d71f7ae
+src-git routing https://git.openwrt.org/feed/routing.git^a82e34d5e402ec77fd5facc1349352cacda2d0f8
+src-git telephony https://git.openwrt.org/feed/telephony.git^98c8a5aa4624312ed758e2e2b6d4039050a1649d

include/host-build.mk

@@ -35,13 +35,11 @@ include $(INCLUDE_DIR)/autotools.mk
 _host_target:=$(if $(HOST_QUILT),,.)
 
 Host/Patch:=$(Host/Patch/Default)
-ifneq ($(strip $(HOST_UNPACK)),)
-  define Host/Prepare/Default
-	$(HOST_UNPACK)
+define Host/Prepare/Default
+	$(if $(strip $(HOST_UNPACK)),$(HOST_UNPACK))
 	[ ! -d ./src/ ] || $(CP) ./src/* $(HOST_BUILD_DIR)
 	$(Host/Patch)
-  endef
-endif
+endef
 
 define Host/Prepare
   $(call Host/Prepare/Default)

include/image-commands.mk

@@ -226,6 +226,48 @@ define Build/copy-file
 	cat "$(1)" > "$@"
 endef
 
+# Create a header for a D-Link AI series recovery image and add it at the beginning of the image
+# Currently supported: AQUILA M30, EAGLE M32 and R32
+# Arguments:
+# 1: Start string of the header
+# 2: Firmware version
+# 3: Block start address
+# 4: Block length
+# 5: Device FMID
+define Build/dlink-ai-recovery-header
+	$(eval header_start=$(word 1,$(1)))
+	$(eval firmware_version=$(word 2,$(1)))
+	$(eval block_start=$(word 3,$(1)))
+	$(eval block_length=$(word 4,$(1)))
+	$(eval device_fmid=$(word 5,$(1)))
+# create $@.header without the checksum
+	echo -en "$(header_start)\x00\x00" > "$@.header"
+# Calculate checksum over data area ($@) and append it to the header.
+# The checksum is the 2byte-sum over the whole data area.
+# Every overflow during the checksum calculation must increment the current checksum value by 1.
+	od -v -w2 -tu2 -An --endian little "$@" | awk '{ s+=$$1; } END { s%=65535; printf "%c%c",s%256,s/256; }' >> "$@.header"
+	echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00" >> "$@.header"
+	echo -en "$(firmware_version)" >> "$@.header"
+# Only one block supported: Erase start/length is identical to data start/length
+	echo -en "$(block_start)$(block_length)$(block_start)$(block_length)" >> "$@.header"
+# Only zeros
+	echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" >> "$@.header"
+# Last 16 bytes, but without checksum
+	echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00" >> "$@.header"
+	echo -en "$(device_fmid)" >> "$@.header"
+# Calculate and append checksum: The checksum must be set so that the 2byte-sum of the whole header is 0.
+# Every overflow during the checksum calculation must increment the current checksum value by 1.
+	od -v -w2 -tu2 -An --endian little "$@.header" | awk '{s+=65535-$$1;}END{s%=65535;printf "%c%c",s%256,s/256;}' >> "$@.header"
+	cat "$@.header" "$@" > "$@.new"
+	mv "$@.new" "$@"
+	rm "$@.header"
+endef
+
+define Build/dlink-sge-image
+	$(STAGING_DIR_HOST)/bin/dlink-sge-image $(1) $@ $@.enc
+	mv $@.enc $@
+endef
+
 define Build/edimax-header
 	$(STAGING_DIR_HOST)/bin/mkedimaximg -i $@ -o $@.new $(1)
 	@mv $@.new $@

include/image.mk

@@ -511,7 +511,7 @@ define Device/Build/initramfs
 	  $$(if $$(CONFIG_JSON_OVERVIEW_IMAGE_INFO), $(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json,))
 
   $(KDIR)/$$(KERNEL_INITRAMFS_NAME):: image_prepare
-  $(1)-images: $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE))
+  $(1)-initramfs-images: $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE))
   $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)
 	cp $$^ $$@
 
@@ -575,7 +575,7 @@ define Device/Build/dtb
   $(KDIR)/image-$(1).dtb: FORCE
 	$(call Image/BuildDTB,$(strip $(2))/$(strip $(3)).dts,$$@)
 
-  image_prepare: $(KDIR)/image-$(1).dtb
+  compile-dtb: $(KDIR)/image-$(1).dtb
   endif
 
 endef
@@ -586,7 +586,7 @@ define Device/Build/dtbo
   $(KDIR)/image-$(1).dtbo: FORCE
 	$(call Image/BuildDTBO,$(strip $(2))/$(strip $(3)).dtso,$$@)
 
-  image_prepare: $(KDIR)/image-$(1).dtbo
+  compile-dtb: $(KDIR)/image-$(1).dtbo
   endif
 
 endef
@@ -639,7 +639,7 @@ define Device/Build/image
   ifndef IB
     $$(ROOTFS/$(1)/$(3)): $(if $(TARGET_PER_DEVICE_ROOTFS),target-dir-$$(ROOTFS_ID/$(3)))
   endif
-  $(KDIR)/tmp/$(call DEVICE_IMG_NAME,$(1),$(2)): $$(KDIR_KERNEL_IMAGE) $$(ROOTFS/$(1)/$(3))
+  $(KDIR)/tmp/$(call DEVICE_IMG_NAME,$(1),$(2)): $$(KDIR_KERNEL_IMAGE) $$(ROOTFS/$(1)/$(3)) $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(if $(IB),,$(3)-initramfs-images))
 	@rm -f $$@
 	[ -f $$(word 1,$$^) -a -f $$(word 2,$$^) ]
 	$$(call concat_cmd,$(if $(IMAGE/$(2)/$(1)),$(IMAGE/$(2)/$(1)),$(IMAGE/$(2))))
@@ -695,7 +695,7 @@ define Device/Build/artifact
 	  $(BUILD_DIR)/json_info_files/$(DEVICE_IMG_PREFIX)-$(1).json, \
 	  $(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1))
   $(eval $(call Device/Export,$(KDIR)/tmp/$(DEVICE_IMG_PREFIX)-$(1)))
-  $(KDIR)/tmp/$(DEVICE_IMG_PREFIX)-$(1): $$(KDIR_KERNEL_IMAGE) $(2)-images
+  $(KDIR)/tmp/$(DEVICE_IMG_PREFIX)-$(1): $$(KDIR_KERNEL_IMAGE) $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(if $(IB),,$(2)-initramfs-images)) $(2)-images
 	@rm -f $$@
 	$$(call concat_cmd,$(ARTIFACT/$(1)))
 
@@ -823,18 +823,20 @@ define BuildImage
   download:
   prepare:
   compile:
+  compile-dtb:
   clean:
   image_prepare:
 
   ifeq ($(IB),)
-    .PHONY: download prepare compile clean image_prepare kernel_prepare install install-images
+    .PHONY: download prepare compile compile-dtb clean image_prepare kernel_prepare install install-images
     compile:
 		$(call Build/Compile)
 
     clean:
 		$(call Build/Clean)
 
-    image_prepare: compile
+    compile-dtb:
+    image_prepare: compile compile-dtb
 		mkdir -p $(BIN_DIR) $(KDIR)/tmp
 		rm -rf $(BUILD_DIR)/json_info_files
 		$(call Image/Prepare)

include/kernel-5.15

@@ -1,2 +1,2 @@
-LINUX_VERSION-5.15 = .137
-LINUX_KERNEL_HASH-5.15.137 = 9749b21609f9e7ad9c46160c2c107db823b99cef77fa6cb080b6c2dc685fb2f7
+LINUX_VERSION-5.15 = .162
+LINUX_KERNEL_HASH-5.15.162 = 91bfc0ea152ce7b102a0b79d35a7c92843874ebf085c99d2ba8b4d85e62b1a7c

include/kernel-build.mk

@@ -156,6 +156,10 @@ define BuildKernel
   compile: $(LINUX_DIR)/.modules
 	$(MAKE) -C image compile TARGET_BUILD=
 
+  dtb: $(STAMP_CONFIGURED)
+	$(_SINGLE)$(KERNEL_MAKE) scripts_dtc
+	$(MAKE) -C image compile-dtb TARGET_BUILD=
+
   oldconfig menuconfig nconfig xconfig: $(STAMP_PREPARED) $(STAMP_CHECKED) FORCE
 	rm -f $(LINUX_DIR)/.config.prev
 	rm -f $(STAMP_CONFIGURED)

include/netfilter.mk

@@ -253,8 +253,6 @@ $(eval $(call nf_add,IPT_LED,CONFIG_NETFILTER_XT_TARGET_LED, $(P_XT)xt_LED))
 # tee
 
 $(eval $(call nf_add,IPT_TEE,CONFIG_NETFILTER_XT_TARGET_TEE, $(P_XT)xt_TEE))
-$(eval $(if $(NF_KMOD),$(call nf_add,IPT_TEE,CONFIG_NF_DUP_IPV4, $(P_V4)nf_dup_ipv4),))
-$(eval $(if $(NF_KMOD),$(call nf_add,IPT_TEE,CONFIG_NF_DUP_IPV6, $(P_V6)nf_dup_ipv6),))
 
 # u32
 

include/quilt.mk

@@ -34,8 +34,8 @@ endif
 ifneq ($(if $(DUMP),1,$(__quilt_inc)),1)
 __quilt_inc:=1
 
-PATCH_DIR?=./patches
-FILES_DIR?=./files
+PATCH_DIR?=$(CURDIR)/patches
+FILES_DIR?=$(CURDIR)/files
 HOST_PATCH_DIR?=$(PATCH_DIR)
 HOST_FILES_DIR?=$(FILES_DIR)
 
@@ -106,13 +106,14 @@ define Kernel/Patch/Default
 endef
 
 define Quilt/RefreshDir
-	mkdir -p $(2)
-	-rm -f $(2)/* 2>/dev/null >/dev/null
-	@( \
+	-rm -rf $(2) 2>/dev/null >/dev/null
+	[ -f $(1)/.quilt_no_patch ] || mkdir -p $(2)
+	@[ -f $(1)/.quilt_no_patch ] || { \
 		for patch in $$$$($(if $(3),grep "^$(3)",cat) $(1)/patches/series | awk '{print $$$$1}'); do \
 			$(CP) -v "$(1)/patches/$$$$patch" $(2); \
 		done; \
-	)
+	}
+	@-rm -f $(1)/.quilt_no_patch 2>/dev/null >/dev/null;
 endef
 
 define Quilt/Refresh/Host
@@ -156,7 +157,7 @@ define Quilt/Template
 	}
 	@[ -f "$(1)/patches/series" ] || { \
 		echo "The source directory contains no quilt patches."; \
-		false; \
+		touch $(1)/patches/series $(1)/.quilt_no_patch; \
 	}
 	@[ -n "$$$$(ls $(1)/patches/series)" -o \
 	   "$$$$(cat $(1)/patches/series | $(MKHASH) md5)" = "$$(sort $(1)/patches/series | $(MKHASH) md5)" ] || { \
@@ -165,10 +166,12 @@ define Quilt/Template
 	}
 
   $(3)refresh: $(3)quilt-check
-	@cd "$(1)"; $(QUILT_CMD) pop -a -f >/dev/null 2>/dev/null
-	@cd "$(1)"; while $(QUILT_CMD) next 2>/dev/null >/dev/null && $(QUILT_CMD) push; do \
-		QUILT_DIFF_OPTS="-p" $(QUILT_CMD) refresh -p ab --no-index --no-timestamps; \
-	done; ! $(QUILT_CMD) next 2>/dev/null >/dev/null
+	@[ -f $(1)/.quilt_no_patch ] || { \
+		cd "$(1)"; $(QUILT_CMD) pop -a -f >/dev/null 2>/dev/null; \
+		while $(QUILT_CMD) next 2>/dev/null >/dev/null && $(QUILT_CMD) push; do \
+			QUILT_DIFF_OPTS="-p" $(QUILT_CMD) refresh -p ab --no-index --no-timestamps; \
+		done; ! $(QUILT_CMD) next 2>/dev/null >/dev/null; \
+	}
 	$(Quilt/Refresh/$(4))
 	
   $(3)update: $(3)quilt-check

include/subdir.mk

@@ -5,6 +5,9 @@
 ifeq ($(MAKECMDGOALS),prereq)
   SUBTARGETS:=prereq
   PREREQ_ONLY:=1
+# For target/linux related target add dtb to selectively compile dtbs
+else ifneq ($(filter target/linux/%,$(MAKECMDGOALS)),)
+  SUBTARGETS:=$(DEFAULT_SUBDIR_TARGETS) dtb
 else
   SUBTARGETS:=$(DEFAULT_SUBDIR_TARGETS)
 endif

include/target.mk

@@ -316,7 +316,15 @@ ifeq ($(DUMP),1)
     ifneq ($(CONFIG_CPU_MIPS32_R2),)
       FEATURES += mips16
     endif
-    FEATURES += $(foreach v,6 7,$(if $(CONFIG_CPU_V$(v)),arm_v$(v)))
+    ifneq ($(CONFIG_CPU_V6),)
+      FEATURES += arm_v6
+    endif
+    ifneq ($(CONFIG_CPU_V6K),)
+      FEATURES += arm_v6
+    endif
+    ifneq ($(CONFIG_CPU_V7),)
+      FEATURES += arm_v7
+    endif
 
     # remove duplicates
     FEATURES:=$(sort $(FEATURES))

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),23.05.2)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),23.05.4)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r23630-842932a63d)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r24012-d8dd03c46f)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/23.05.2)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/23.05.4)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/Makefile

@@ -59,6 +59,7 @@ $(curdir)/merge-index: $(curdir)/merge
 	(cd $(PACKAGE_DIR_ALL) && $(SCRIPT_DIR)/ipkg-make-index.sh . 2>&1 > Packages; )
 
 ifndef SDK
+  $(curdir)//compile = $(STAGING_DIR)/.prepared $(BIN_DIR)
   $(curdir)/compile: $(curdir)/system/opkg/host/compile
 endif
 

package/base-files/files/lib/functions.sh

@@ -262,11 +262,6 @@ default_postinst() {
 
 	add_group_and_user "${pkgname}"
 
-	if [ -f "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" ]; then
-		( . "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" )
-		ret=$?
-	fi
-
 	if [ -d "$root/rootfs-overlay" ]; then
 		cp -R $root/rootfs-overlay/. $root/
 		rm -fR $root/rootfs-overlay/
@@ -292,6 +287,11 @@ default_postinst() {
 		rm -f /tmp/luci-indexcache
 	fi
 
+	if [ -f "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" ]; then
+		( . "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" )
+		ret=$?
+	fi
+
 	local shell="$(command -v bash)"
 	for i in $(grep -s "^/etc/init.d/" "$root$filelist"); do
 		if [ -n "$root" ]; then
@@ -371,7 +371,7 @@ group_add_next() {
 		return
 	fi
 	gids=$(cut -d: -f3 ${IPKG_INSTROOT}/etc/group)
-	gid=65536
+	gid=32768
 	while echo "$gids" | grep -q "^$gid$"; do
 		gid=$((gid + 1))
 	done
@@ -402,7 +402,7 @@ user_add() {
 	local rc
 	[ -z "$uid" ] && {
 		uids=$(cut -d: -f3 ${IPKG_INSTROOT}/etc/passwd)
-		uid=65536
+		uid=32768
 		while echo "$uids" | grep -q "^$uid$"; do
 			uid=$((uid + 1))
 		done

package/base-files/files/lib/functions/leds.sh

@@ -11,6 +11,36 @@ get_dt_led_path() {
 	echo "$ledpath"
 }
 
+get_dt_led_color_func() {
+	local enum
+	local func
+	local idx
+	local label
+
+	[ -e "$1/function" ] && func=$(cat "$1/function")
+	[ -e "$1/color" ] && idx=$((0x$(hexdump -n 4 -e '4/1 "%02x"' "$1/color")))
+	[ -e "$1/function-enumerator" ] && \
+		enum=$((0x$(hexdump -n 4 -e '4/1 "%02x"' "$1/function-enumerator")))
+
+	[ -z "$idx" ] && [ -z "$func" ] && return 2
+
+	if [ -n "$idx" ]; then
+		for color in "white" "red" "green" "blue" "amber" \
+			     "violet" "yellow" "ir" "multicolor" "rgb" \
+			     "purple" "orange" "pink" "cyan" "lime"
+		do
+			[ $idx -eq 0 ] && label="$color" && break
+			idx=$((idx-1))
+		done
+	fi
+
+	label="$label:$func"
+	[ -n "$enum" ] && label="$label-$enum"
+	echo "$label"
+
+	return 0
+}
+
 get_dt_led() {
 	local label
 	local ledpath=$(get_dt_led_path $1)
@@ -18,6 +48,7 @@ get_dt_led() {
 	[ -n "$ledpath" ] && \
 		label=$(cat "$ledpath/label" 2>/dev/null) || \
 		label=$(cat "$ledpath/chan-name" 2>/dev/null) || \
+		label=$(get_dt_led_color_func "$ledpath") || \
 		label=$(basename "$ledpath")
 
 	echo "$label"

package/base-files/files/lib/functions/system.sh

@@ -61,11 +61,21 @@ find_mtd_chardev() {
 	echo "${INDEX:+$PREFIX$INDEX}"
 }
 
+get_mac_ascii() {
+	local part="$1"
+	local key="$2"
+	local mac_dirty
+
+	mac_dirty=$(strings "$part" | sed -n 's/^'"$key"'=//p')
+
+	# "canonicalize" mac
+	[ -n "$mac_dirty" ] && macaddr_canonicalize "$mac_dirty"
+}
+
 mtd_get_mac_ascii() {
 	local mtdname="$1"
 	local key="$2"
 	local part
-	local mac_dirty
 
 	part=$(find_mtd_part "$mtdname")
 	if [ -z "$part" ]; then
@@ -73,10 +83,7 @@ mtd_get_mac_ascii() {
 		return
 	fi
 
-	mac_dirty=$(strings "$part" | sed -n 's/^'"$key"'=//p')
-
-	# "canonicalize" mac
-	[ -n "$mac_dirty" ] && macaddr_canonicalize "$mac_dirty"
+	get_mac_ascii "$part" "$key"
 }
 
 mtd_get_mac_encrypted_arcadyan() {
@@ -190,6 +197,20 @@ mtd_get_part_size() {
 	done < /proc/mtd
 }
 
+mmc_get_mac_ascii() {
+	local part_name="$1"
+	local key="$2"
+	local part
+
+	part=$(find_mmc_part "$part_name")
+	if [ -z "$part" ]; then
+		echo "mmc_get_mac_ascii: partition $part_name not found!" >&2
+		return
+	fi
+
+	get_mac_ascii "$part" "$key"
+}
+
 mmc_get_mac_binary() {
 	local part_name="$1"
 	local offset="$2"

package/base-files/image-config.in

@@ -190,7 +190,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/releases/23.05.2"
+		default "https://downloads.openwrt.org/releases/23.05.4"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/arm-trusted-firmware-mediatek/Makefile

@@ -191,6 +191,15 @@ define Trusted-Firmware-A/mt7986-spim-nand-ddr4
   NAND_TYPE:=spim:2k+64
 endef
 
+define Trusted-Firmware-A/mt7986-spim-nand-4k-ddr4
+  NAME:=MediaTek MT7986 (SPI-NAND via SPIM, DDR4)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7986
+  DDR_TYPE:=ddr4
+  NAND_TYPE:=spim:4k+256
+endef
+
 define Trusted-Firmware-A/mt7986-nor-ddr3
   NAME:=MediaTek MT7986 (SPI-NOR, DDR3)
   BOOT_DEVICE:=nor
@@ -377,6 +386,7 @@ TFA_TARGETS:= \
 	mt7986-sdmmc-ddr4 \
 	mt7986-snand-ddr4 \
 	mt7986-spim-nand-ddr4 \
+	mt7986-spim-nand-4k-ddr4 \
 	mt7988-emmc-ddr3 \
 	mt7988-nor-ddr3 \
 	mt7988-sdmmc-ddr3 \

package/boot/uboot-envtools/files/ath79

@@ -119,6 +119,9 @@ domywifi,dw33d)
 glinet,gl-ar150)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x10000"
 	;;
+huawei,ap5030dn)
+	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x20000" "0x20000"
+	;;
 netgear,wndr3700|\
 netgear,wndr3700-v2|\
 netgear,wndrmac-v1)

package/boot/uboot-envtools/files/kirkwood

@@ -17,6 +17,7 @@ cloudengines,pogoe02|\
 cloudengines,pogoplugv4|\
 globalscale,sheevaplug|\
 iom,ix2-200|\
+iom,ix4-200d|\
 linksys,e4200-v2|\
 linksys,ea4500|\
 netgear,readynas-duo-v2|\

package/boot/uboot-envtools/files/mediatek_filogic

@@ -12,6 +12,9 @@ touch /etc/config/ubootenv
 board=$(board_name)
 
 case "$board" in
+asus,rt-ax59u)
+	ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
+	;;
 bananapi,bpi-r3)
 	rootdev="$(cmdline_get_var root)"
 	rootdev="${rootdev##*/}"
@@ -54,27 +57,26 @@ cmcc,rax3000m)
 		;;
 	esac
 	;;
-glinet,gl-mt3000)
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
+comfast,cf-e393ax)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
 	;;
-mercusys,mr90x-v1)
-	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
-	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
-	;;
-netgear,wax220)
+cetron,ct3003|\
+netgear,wax220|\
+zbtlink,zbt-z8102ax|\
+zbtlink,zbt-z8103ax)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;
-xiaomi,mi-router-wr30u-112m-nmbm|\
-xiaomi,mi-router-wr30u-stock|\
-xiaomi,redmi-router-ax6000-stock)
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
-	ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
+dlink,aquila-pro-ai-m30-a1)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
 	;;
 h3c,magic-nx30-pro|\
+jcg,q30-pro|\
+netcore,n60|\
 qihoo,360t7|\
 tplink,tl-xdr4288|\
 tplink,tl-xdr6086|\
 tplink,tl-xdr6088|\
+xiaomi,mi-router-ax3000t-ubootmod|\
 xiaomi,mi-router-wr30u-ubootmod|\
 xiaomi,redmi-router-ax6000-ubootmod)
 	. /lib/upgrade/nand.sh
@@ -84,10 +86,47 @@ xiaomi,redmi-router-ax6000-ubootmod)
 	ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x20000" "1"
 	ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x20000" "1"
 	;;
+glinet,gl-mt3000)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
+	;;
+glinet,gl-mt6000)
+	local envdev=$(find_mmc_part "u-boot-env")
+	ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
+	;;
+jdcloud,re-cp-03)
+	local envdev=$(find_mmc_part "ubootenv" "mmcblk0")
+	ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1"
+	ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1"
+	;;
+mercusys,mr90x-v1|\
+routerich,ax3000)
+	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
+	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
+	;;
+ubnt,unifi-6-plus)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
+	;;
+xiaomi,mi-router-ax3000t|\
+xiaomi,mi-router-wr30u-stock|\
+xiaomi,redmi-router-ax6000-stock)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
+	ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
+	;;
 zyxel,ex5601-t0)
 	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
 	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x40000" "2"
 	;;
+zyxel,ex5601-t0-ubootmod)
+        . /lib/upgrade/nand.sh
+        local envubi=$(nand_find_ubi ubi)
+        local envdev=/dev/$(nand_find_volume $envubi ubootenv)
+        local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
+        ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x20000" "1"
+        ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x20000" "1"
+        ;;
+zyxel,ex5700-telenor)
+	ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1"
+	;;
 esac
 
 config_load ubootenv

package/boot/uboot-envtools/files/mediatek_mt7622

@@ -12,6 +12,10 @@ touch /etc/config/ubootenv
 board=$(board_name)
 
 case "$board" in
+dlink,eagle-pro-ai-m32-a1|\
+dlink,eagle-pro-ai-r32-a1)
+	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x2000" "0x2000"
+	;;
 linksys,e8450-ubi)
 	ubootenv_add_uci_config "/dev/ubi0_0" "0x0" "0x1f000" "0x1f000" "1"
 	ubootenv_add_uci_config "/dev/ubi0_1" "0x0" "0x1f000" "0x1f000" "1"

package/boot/uboot-envtools/files/ramips

@@ -32,7 +32,8 @@ allnet,all5002|\
 yuncore,ax820)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
-arcadyan,we420223-99)
+arcadyan,we420223-99|\
+dlink,dir-806a-b1)
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x1000" "0x1000"
 	;;
 ampedwireless,ally-00x19k|\
@@ -43,6 +44,7 @@ beeline,smartbox-giga|\
 beeline,smartbox-turbo|\
 beeline,smartbox-turbo-plus|\
 etisalat,s3|\
+rostelecom,rt-fe-1a|\
 rostelecom,rt-sf-1)
 	ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000"
 	;;
@@ -73,6 +75,7 @@ h3c,tx1801-plus|\
 h3c,tx1806|\
 jcg,q20|\
 linksys,e7350|\
+netgear,eax12|\
 netgear,wax202|\
 zyxel,wsm20)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"

package/boot/uboot-mediatek/Makefile

@@ -236,6 +236,18 @@ define U-Boot/mt7981_h3c_magic-nx30-pro
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_jcg_q30-pro
+  NAME:=JCG Q30 PRO
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=jcg_q30-pro
+  UBOOT_CONFIG:=mt7981_jcg_q30-pro
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_rfb-spim-nand
   NAME:=MT7981 Reference Board
   BUILD_SUBTARGET:=filogic
@@ -308,6 +320,18 @@ define U-Boot/mt7981_qihoo_360t7
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_xiaomi_mi-router-ax3000t
+  NAME:=Xiaomi Router AX3000T
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=xiaomi_mi-router-ax3000t-ubootmod
+  UBOOT_CONFIG:=mt7981_xiaomi_mi-router-ax3000t
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_xiaomi_mi-router-wr30u
   NAME:=Xiaomi Router WR30U
   BUILD_SUBTARGET:=filogic
@@ -381,6 +405,42 @@ define U-Boot/mt7986_bananapi_bpi-r3-nor
   FIP_COMPRESS:=1
 endef
 
+define U-Boot/mt7986_glinet_gl-mt6000
+  NAME:=GL.iNet GL-MT6000
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=glinet_gl-mt6000
+  UBOOT_CONFIG:=mt7986a_glinet_gl-mt6000
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
+endef
+
+define U-Boot/mt7986_jdcloud_re-cp-03
+  NAME:=JDCloud RE-CP-03
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=jdcloud_re-cp-03
+  UBOOT_CONFIG:=mt7986a_jdcloud_re-cp-03
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
+endef
+
+define U-Boot/mt7986_netcore_n60
+  NAME:=Netcore N60
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=netcore_n60
+  UBOOT_CONFIG:=mt7986_netcore_n60
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr3
+endef
+
 define U-Boot/mt7986_tplink_tl-xdr4288
   NAME:=TP-LINK TL-XDR4288
   BUILD_SUBTARGET:=filogic
@@ -429,6 +489,18 @@ define U-Boot/mt7986_xiaomi_redmi-router-ax6000
   DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr4
 endef
 
+define U-Boot/mt7986_zyxel_ex5601-t0
+  NAME:=Zyxel EX5601-T0
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=zyxel_ex5601-t0-ubootmod
+  UBOOT_CONFIG:=mt7986_zyxel_ex5601-t0
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand-4k
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-4k-ddr4
+endef
+
 define U-Boot/mt7988_rfb-spim-nand
   NAME:=MT7988 Reference Board
   BUILD_SUBTARGET:=filogic
@@ -511,21 +583,27 @@ UBOOT_TARGETS := \
 	mt7981_cmcc_rax3000m-emmc \
 	mt7981_cmcc_rax3000m-nand \
 	mt7981_h3c_magic-nx30-pro \
+	mt7981_jcg_q30-pro \
 	mt7981_rfb-spim-nand \
 	mt7981_rfb-emmc \
 	mt7981_rfb-nor \
 	mt7981_rfb-sd \
 	mt7981_rfb-snfi \
 	mt7981_qihoo_360t7 \
+	mt7981_xiaomi_mi-router-ax3000t \
 	mt7981_xiaomi_mi-router-wr30u \
 	mt7986_bananapi_bpi-r3-emmc \
 	mt7986_bananapi_bpi-r3-sdmmc \
 	mt7986_bananapi_bpi-r3-snand \
 	mt7986_bananapi_bpi-r3-nor \
+	mt7986_glinet_gl-mt6000 \
+	mt7986_jdcloud_re-cp-03 \
+	mt7986_netcore_n60 \
 	mt7986_tplink_tl-xdr4288 \
 	mt7986_tplink_tl-xdr6086 \
 	mt7986_tplink_tl-xdr6088 \
 	mt7986_xiaomi_redmi-router-ax6000 \
+	mt7986_zyxel_ex5601-t0 \
 	mt7986_rfb \
 	mt7988_rfb-spim-nand \
 	mt7988_rfb-snand \

package/boot/uboot-mediatek/patches/260-add-missing-type-u64.patch

@@ -1,10 +0,0 @@
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -1,6 +1,7 @@
- #ifndef _LINUX_TYPES_H
- #define _LINUX_TYPES_H
- 
-+typedef unsigned long long __u64;
- #include <linux/posix_types.h>
- #include <asm/types.h>
- #include <stdbool.h>

package/boot/uboot-mediatek/patches/429-add-netcore-n60.patch

@@ -0,0 +1,433 @@
+--- /dev/null
++++ b/configs/mt7986_netcore_n60_defconfig
+@@ -0,0 +1,182 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7986=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-netcore-n60"
++CONFIG_DEFAULT_ENV_FILE="netcore_n60_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-netcore-n60.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7986> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_USB=y
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-netcore-n60.dts
+@@ -0,0 +1,185 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2021 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7986.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Netcore N60";
++	compatible = "mediatek,mt7986", "mediatek,mt7986-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		factory {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		wps {
++			label = "wps";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		status_red {
++			label = "red:status";
++			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
++		};
++
++		status_green {
++			label = "green:status";
++			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "disabled";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_2";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	pwm_pins: pwm0-pins-func-1 {
++		mux {
++			function = "pwm";
++			groups = "pwm0";
++		};
++	};
++};
++
++&pwm {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm_pins>;
++	status = "okay";
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <1>;
++	sample_sel = <0>;
++
++	spi_nand@1 {
++		compatible = "spi-nand";
++		reg = <1>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "orig-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7280000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/netcore_n60_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-netcore_n60-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-netcore_n60-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-netcore_n60-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-netcore_n60-squashfs-sysupgrade.itb
++bootled_pwr=green:status
++bootled_rec=red:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
++ethaddr_factory=mtd read factory 0x40080000 0x1fe000 0x1000 && env readmem -b ethaddr 0x40080f20 0x6 ; setenv ethaddr_factory
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/436-add-glinet-mt6000.patch

@@ -0,0 +1,274 @@
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-glinet-gl-mt6000.dts
+@@ -0,0 +1,135 @@
++// SPDX-License-Identifier: GPL-2.0
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include <dt-bindings/gpio/gpio.h>
++
++#include "mt7986.dtsi"
++
++/ {
++	model = "GL.iNet GL-MT6000";
++	compatible = "glinet,gl-mt6000", "mediatek,mt7986-emmc-rfb", "mediatek,mt7986";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x40000000>;
++	};
++
++    reg_1p8v: regulator-1p8v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-1.8V";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	reg_3p3v: regulator-3p3v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-3.3V";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		wps {
++			label = "reset";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_blue: green {
++			label = "blue:status";
++			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_white: blue {
++			label = "white:status";
++			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	mmc0_pins_default: mmc0default {
++		mux {
++			function = "flash";
++			groups =  "emmc_51";
++		};
++
++		conf-cmd-dat {
++			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
++			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
++			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
++			input-enable;
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++
++		conf-clk {
++			pins = "EMMC_CK";
++			drive-strength = <MTK_DRIVE_6mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-dsl {
++			pins = "EMMC_DSL";
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-rst {
++			pins = "EMMC_RSTB";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++	};
++};
++
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_default>;
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	cap-mmc-highspeed;
++	cap-mmc-hw-reset;
++	vmmc-supply = <&reg_3p3v>;
++	vqmmc-supply = <&reg_1p8v>;
++	non-removable;
++	status = "okay";
++};
++
++&wmcpu_emi {
++	status = "disabled";
++};
+--- /dev/null
++++ b/configs/mt7986a_glinet_gl-mt6000_defconfig
+@@ -0,0 +1,105 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x80000
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-glinet-gl-mt6000"
++CONFIG_SYS_PROMPT="MT7986> "
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7986=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_AHCI=y
++CONFIG_FIT=y
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-glinet-gl-mt6000.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="glinet_gl-mt6000_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/glinet_gl-mt6000_env
+@@ -0,0 +1,25 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++bootdelay=3
++bootfile_bl2=openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip
++bootfile_firmware=openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_title=      *** U-Boot Boot Menu for GL-iNet GL-MT6000 ***
++bootmenu_0=Startup system (Default).=run boot_system
++bootmenu_1=Load Firmware via TFTP then write to eMMC.=run boot_tftp_firmware ; run bootmenu_confirm_return
++bootmenu_2=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_3=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_4=Reboot.=reset
++bootmenu_5=Reset all settings to factory defaults.=run reset_factory ; reset
++filesize_to_blk=setexpr cnt $filesize + 0x1ff && setexpr cnt $cnt / 0x200
++mmc_read_kernel=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr $part_addr $image_size
++boot_system=part start mmc 0 kernel part_addr && part size mmc 0 kernel part_size && run mmc_read_kernel && bootm
++boot_tftp_firmware=tftpboot $loadaddr $bootfile_firmware && run emmc_write_firmware
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++emmc_write_firmware=part start mmc 0 kernel part_addr && run filesize_to_blk && mmc write $loadaddr $part_addr $cnt
++emmc_write_bl2=run filesize_to_blk && test 0x$cnt -le 0x800 && mmc partconf 0 1 1 1 &&  && mmc write $loadaddr 0x0 0x800 ; mmc partconf 0 1 1 0
++emmc_write_fip=part start mmc 0 fip part_addr && part size mmc 0 fip part_size && run filesize_to_blk && test 0x$cnt -le 0x$part_size && mmc write $loadaddr $part_addr $cnt
++reset_factory=eraseenv && reset

package/boot/uboot-mediatek/patches/438-add-jcg_q30-pro.patch

@@ -0,0 +1,420 @@
+--- /dev/null
++++ b/configs/mt7981_jcg_q30-pro_defconfig
+@@ -0,0 +1,175 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7981=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981_jcg_q30-pro"
++CONFIG_DEFAULT_ENV_FILE="jcg_q30-pro_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981_jcg_q30-pro.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7981_jcg_q30-pro.dts
+@@ -0,0 +1,179 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "JCG Q30 PRO";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		factory {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		status_red {
++			label = "red:status";
++			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
++		};
++
++		status_blue {
++			label = "blue:status";
++			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "disabled";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_1";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	pwm_pins: pwm0-pins-func-1 {
++		mux {
++			function = "pwm";
++			groups = "pwm0_1", "pwm1_0";
++		};
++	};
++};
++
++&pwm {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm_pins>;
++	status = "okay";
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "orig-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7000000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/jcg_q30-pro_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-jcg_q30-pro-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-jcg_q30-pro-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-jcg_q30-pro-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-jcg_q30-pro-squashfs-sysupgrade.itb
++bootled_pwr=blue:status
++bootled_rec=red:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
++ethaddr_factory=mtd read factory 0x40080000 0xa0000 0x800 && env readmem -b ethaddr 0x4008002a 0x6 ; setenv ethaddr_factory
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/439-add-zyxel_ex5601-t0.patch

@@ -0,0 +1,431 @@
+--- /dev/null
++++ b/configs/mt7986_zyxel_ex5601-t0_defconfig
+@@ -0,0 +1,186 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7986=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-zyxel_ex5601-t0"
++CONFIG_DEFAULT_ENV_FILE="zyxel_ex5601-t0_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-zyxel_ex5601-t0.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="EX5601> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++# CONFIG_DM_PCI is not set
++# CONFIG_PCIE_MEDIATEK is not set
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++# CONFIG_I2C is not set
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_USB=y
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-zyxel_ex5601-t0.dts
+@@ -0,0 +1,181 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Author: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
++ * Author: Nicolò Veronese <nicveronese@gmail.com>
++ */
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include "mt7986.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Zyxel EX5601-T0 ubootmod";
++	compatible = "mediatek,mt7986", "mediatek,mt7986-sd-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++		factory {
++			label = "reset";
++			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++
++		wps {
++			label = "wps";
++			gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_WPS_BUTTON>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_green: pwr {
++			label = "green:status";
++			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
++			default-state = "off";
++		};
++
++		led_sfp_green: sfp {
++			label = "green:sfp";
++			gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
++			default-state = "off";
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "disabled";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_2";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <1>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <20000000>;
++		spi-tx-buswidth = <4>;
++		spi-rx-buswidth = <4>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x0100000 0x0080000>;
++			};
++
++			partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x0200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x0200000>;
++			};
++
++			partition@540000 {
++				label = "zloader";
++				reg = <0x540000 0x0040000>;
++				read-only;
++			};
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x1da80000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
++
+--- /dev/null
++++ b/zyxel_ex5601-t0_env
+@@ -0,0 +1,55 @@
++ethaddr_factory=mtd read Factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x4008002A 0x6 ; setenv ethaddr_factory
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=console=ttyS0,115200n8 console_msg_format=syslog
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-squashfs-sysupgrade.itb
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=run ubi_read_production && bootm $loadaddr#$bootconf
++boot_recovery=run ubi_read_recovery && bootm $loadaddr#$bootconf
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_fit=fit
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr $part_fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/440-add-xiaomi_mi-router-ax3000t.patch

@@ -0,0 +1,414 @@
+--- /dev/null
++++ b/configs/mt7981_xiaomi_mi-router-ax3000t_defconfig
+@@ -0,0 +1,163 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7981=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981_xiaomi_mi-router-ax3000t"
++CONFIG_DEFAULT_ENV_FILE="xiaomi_mi-router-ax3000t_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981_xiaomi_mi-router-ax3000t.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++# CONFIG_CMD_EXT4 is not set
++# CONFIG_CMD_FAT is not set
++CONFIG_CMD_FDT=y
++# CONFIG_CMD_FS_GENERIC is not set
++# CONFIG_CMD_FS_UUID is not set
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MTD=y
++# CONFIG_CMD_PCI is not set
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++# CONFIG_CMD_PWM is not set
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++# CONFIG_CMD_USB is not set
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++# CONFIG_DM_USB is not set
++# CONFIG_DM_PWM is not set
++# CONFIG_PWM_MTK is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++# CONFIG_DM_SCSI is not set
++# CONFIG_AHCI is not set
++CONFIG_PHY=y
++# CONFIG_PHY_MTK_TPHY is not set
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++# CONFIG_PCI is not set
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++# CONFIG_DM_PCI is not set
++# CONFIG_PCIE_MEDIATEK is not set
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++# CONFIG_USB is not set
++# CONFIG_USB_HOST is not set
++# CONFIG_USB_XHCI_HCD is not set
++# CONFIG_USB_XHCI_MTK is not set
++# CONFIG_USB_STORAGE is not set
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7981_xiaomi_mi-router-ax3000t.dts
+@@ -0,0 +1,187 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Xiaomi Router AX3000T";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++
++		mesh {
++			label = "mesh";
++			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++			linux,code = <BTN_9>;
++			linux,input-type = <EV_SW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_blue {
++			label = "blue:status";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_yellow {
++			label = "yellow:status";
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_1";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x00 0x100000>;
++			};
++
++			partition@100000 {
++				label = "Nvram";
++				reg = <0x100000 0x40000>;
++			};
++
++			partition@140000 {
++				label = "Bdata";
++				reg = <0x140000 0x40000>;
++			};
++
++			partition@180000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "crash";
++				reg = <0x580000 0x40000>;
++			};
++
++			partition@5c0000 {
++				label = "crash_log";
++				reg = <0x5c0000 0x40000>;
++			};
++
++			partition@600000 {
++				label = "ubi";
++				reg = <0x600000 0x7000000>;
++			};
++
++			partition@7600000 {
++				label = "KF";
++				reg = <0x7600000 0x40000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/xiaomi_mi-router-ax3000t_env
+@@ -0,0 +1,55 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=console=ttyS0,115200n8 console_msg_format=syslog
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb
++bootled_pwr=yellow:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/441-add-jdcloud_re-cp-03.patch

@@ -0,0 +1,324 @@
+--- /dev/null
++++ b/configs/mt7986a_jdcloud_re-cp-03_defconfig
+@@ -0,0 +1,112 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x40000
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-jdcloud_re-cp-03"
++CONFIG_SYS_PROMPT="MT7986> "
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7986=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_ENV_OFFSET_REDUND=0x440000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-jdcloud_re-cp-03.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="jdcloud_re-cp-03_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_MDIO=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_RAM=y
++CONFIG_SCSI=y
++CONFIG_DM_SCSI=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-jdcloud_re-cp-03.dts
+@@ -0,0 +1,148 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include "mt7986.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "JDCloud RE-CP-03";
++	compatible = "mediatek,mt7986", "mediatek,mt7986-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x40000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		button-joylink {
++			label = "joylink";
++			linux,code = <BTN_0>;
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++		};
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "blue:status";
++			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
++			default-state = "off";
++		};
++
++		led-1 {
++			label = "red:status";
++			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
++			default-state = "on";
++		};
++
++		led-2 {
++			label = "green:status";
++			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
++			default-state = "off";
++		};
++	};
++
++	reg_1p8v: regulator-1p8v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-1.8V";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	reg_3p3v: regulator-3p3v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-3.3V";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&mmc0 {
++	bus-width = <8>;
++	cap-mmc-highspeed;
++	cap-mmc-hw-reset;
++	max-frequency = <200000000>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_default>;
++	vmmc-supply = <&reg_3p3v>;
++	vqmmc-supply = <&reg_1p8v>;
++	status = "okay";
++};
++
++&pinctrl {
++	mmc0_pins_default: mmc0default {
++		mux {
++			function = "flash";
++			groups =  "emmc_51";
++		};
++
++		conf-cmd-dat {
++			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
++			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
++			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
++			input-enable;
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++
++		conf-clk {
++			pins = "EMMC_CK";
++			drive-strength = <MTK_DRIVE_6mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-dsl {
++			pins = "EMMC_DSL";
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-rst {
++			pins = "EMMC_RSTB";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++	};
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/jdcloud_re-cp-03_env
+@@ -0,0 +1,55 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=root=/dev/mmcblk0p65 rootwait
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-jdcloud_re-cp-03-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-jdcloud_re-cp-03-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-jdcloud_re-cp-03-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-jdcloud_re-cp-03-squashfs-sysupgrade.itb
++bootled_pwr=red:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_emmc=run boot_production ; run boot_recovery
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
++mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
++part_default=production
++part_recovery=recovery
++reset_factory=eraseenv && reset
++emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
++emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
++emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
++emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
++emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
++emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
++_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-sunxi/patches/260-add-missing-type-u64.patch

@@ -1,10 +0,0 @@
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -1,6 +1,7 @@
- #ifndef _LINUX_TYPES_H
- #define _LINUX_TYPES_H
- 
-+typedef unsigned long long __u64;
- #include <linux/posix_types.h>
- #include <asm/types.h>
- #include <stdbool.h>

package/firmware/ath11k-firmware/Makefile

@@ -50,7 +50,7 @@ QCN9074_BOARD_REV:=8e140c65f36137714b6d8934e09dcd73cb05c2f6
 QCN9074_BOARD_FILE:=board-2.bin.$(QCN9074_BOARD_REV)
 
 define Download/qcn9074-board
-  URL:=https://github.com/kvalo/ath11k-firmware/raw/master/QCN9074/hw1.0/
+  URL:=https://git.codelinaro.org/clo/ath-firmware/ath11k-firmware/-/raw/main/QCN9074/hw1.0/
   URL_FILE:=board-2.bin
   FILE:=$(QCN9074_BOARD_FILE)
   HASH:=dbf0ca14aa1229eccd48f26f1026901b9718b143bd30b51b8ea67c84ba6207f1

package/firmware/intel-microcode/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=intel-microcode
-PKG_VERSION:=20230808
+PKG_VERSION:=20240531
 PKG_RELEASE:=1
 
 PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).1.tar.xz
 PKG_SOURCE_URL:=@DEBIAN/pool/non-free-firmware/i/intel-microcode/
-PKG_HASH:=29e77c275b3f60a691832c0844f70effbd94a4594d04af21e0c2e6e0c1ac1894
+PKG_HASH:=808cbb57a790dab7060b59b31e70e54ac47d3798d75e9784ed57a65b9f951fc4
 PKG_BUILD_DIR:=$(BUILD_DIR)/intel-microcode-3.$(PKG_VERSION).1
 PKG_CPE_ID:=cpe:/a:intel:microcode
 

package/firmware/linux-firmware/Makefile

@@ -30,6 +30,8 @@ define Package/firmware-default
   URL:=http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git
   TITLE:=$(1)
   DEPENDS:=$(2)
+  LICENSE_FILES:=$(3)
+  LICENSE:=$(4)
 endef
 
 define Build/Compile

package/firmware/linux-firmware/amd.mk

@@ -1,4 +1,4 @@
-Package/amd64-microcode = $(call Package/firmware-default,AMD64 CPU microcode,@TARGET_x86)
+Package/amd64-microcode = $(call Package/firmware-default,AMD64 CPU microcode,@TARGET_x86,LICENSE.amd-ucode)
 define Package/amd64-microcode/install
 	$(INSTALL_DIR) $(1)/lib/firmware/amd-ucode
 	$(CP) \
@@ -8,7 +8,7 @@ endef
 
 $(eval $(call BuildPackage,amd64-microcode))
 
-Package/amdgpu-firmware = $(call Package/firmware-default,AMDGPU Video Driver firmware)
+Package/amdgpu-firmware = $(call Package/firmware-default,AMDGPU Video Driver firmware,,LICENSE.amdgpura)
 define Package/amdgpu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/amdgpu
 	$(CP) \
@@ -18,7 +18,7 @@ endef
 
 $(eval $(call BuildPackage,amdgpu-firmware))
 
-Package/radeon-firmware = $(call Package/firmware-default,Radeon Video Driver firmware)
+Package/radeon-firmware = $(call Package/firmware-default,Radeon Video Driver firmware,,LICENSE.radeon)
 define Package/radeon-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/radeon
 	$(CP) \

package/firmware/linux-firmware/broadcom.mk

@@ -1,4 +1,4 @@
-Package/brcmfmac-firmware-4339-sdio = $(call Package/firmware-default,Broadcom 4339 FullMAC SDIO firmware)
+Package/brcmfmac-firmware-4339-sdio = $(call Package/firmware-default,Broadcom 4339 FullMAC SDIO firmware,,LICENCE.cypressb)
 define Package/brcmfmac-firmware-4339-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/cypress
 	$(INSTALL_DATA) \
@@ -11,7 +11,7 @@ define Package/brcmfmac-firmware-4339-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4339-sdio))
 
-Package/brcmfmac-firmware-43602a1-pcie = $(call Package/firmware-default,Broadcom 43602a1 FullMAC PCIe firmware)
+Package/brcmfmac-firmware-43602a1-pcie = $(call Package/firmware-default,Broadcom 43602a1 FullMAC PCIe firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-firmware-43602a1-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -20,7 +20,7 @@ define Package/brcmfmac-firmware-43602a1-pcie/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-43602a1-pcie))
 
-Package/brcmfmac-firmware-4366b1-pcie = $(call Package/firmware-default,Broadcom 4366b1 FullMAC PCIe firmware)
+Package/brcmfmac-firmware-4366b1-pcie = $(call Package/firmware-default,Broadcom 4366b1 FullMAC PCIe firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-firmware-4366b1-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -29,7 +29,7 @@ define Package/brcmfmac-firmware-4366b1-pcie/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4366b1-pcie))
 
-Package/brcmfmac-firmware-4366c0-pcie = $(call Package/firmware-default,Broadcom 4366c0 FullMAC PCIe firmware)
+Package/brcmfmac-firmware-4366c0-pcie = $(call Package/firmware-default,Broadcom 4366c0 FullMAC PCIe firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-firmware-4366c0-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -38,7 +38,7 @@ define Package/brcmfmac-firmware-4366c0-pcie/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4366c0-pcie))
 
-Package/brcmfmac-firmware-4329-sdio = $(call Package/firmware-default,Broadcom BCM4329 FullMac SDIO firmware)
+Package/brcmfmac-firmware-4329-sdio = $(call Package/firmware-default,Broadcom BCM4329 FullMac SDIO firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-firmware-4329-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -47,7 +47,7 @@ define Package/brcmfmac-firmware-4329-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4329-sdio))
 
-Package/brcmfmac-nvram-43430-sdio = $(call Package/firmware-default,Broadcom BCM43430 SDIO NVRAM)
+Package/brcmfmac-nvram-43430-sdio = $(call Package/firmware-default,Broadcom BCM43430 SDIO NVRAM,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-nvram-43430-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -95,7 +95,7 @@ define Package/brcmfmac-nvram-43430-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-nvram-43430-sdio))
 
-Package/brcmfmac-firmware-43430a0-sdio = $(call Package/firmware-default,Broadcom BCM43430a0 FullMac SDIO firmware)
+Package/brcmfmac-firmware-43430a0-sdio = $(call Package/firmware-default,Broadcom BCM43430a0 FullMac SDIO firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-firmware-43430a0-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -104,7 +104,7 @@ define Package/brcmfmac-firmware-43430a0-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-43430a0-sdio))
 
-Package/brcmfmac-nvram-43455-sdio = $(call Package/firmware-default,Broadcom BCM43455 SDIO NVRAM)
+Package/brcmfmac-nvram-43455-sdio = $(call Package/firmware-default,Broadcom BCM43455 SDIO NVRAM,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-nvram-43455-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -161,7 +161,7 @@ define Package/brcmfmac-firmware-usb/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-usb))
 
-Package/brcmsmac-firmware = $(call Package/firmware-default,Broadcom BCM43xx softmac PCIe firmware)
+Package/brcmsmac-firmware = $(call Package/firmware-default,Broadcom BCM43xx softmac PCIe firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmsmac-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \

package/firmware/linux-firmware/intel.mk

@@ -177,6 +177,13 @@ define Package/iwlwifi-firmware-ax200/install
 endef
 $(eval $(call BuildPackage,iwlwifi-firmware-ax200))
 
+Package/iwlwifi-firmware-ax201 = $(call Package/firmware-default,Intel AX201 firmware)
+define Package/iwlwifi-firmware-ax201/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-QuZ-a0-hr-b0-72.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-ax201))
+
 Package/iwlwifi-firmware-ax210 = $(call Package/firmware-default,Intel AX210 firmware)
 define Package/iwlwifi-firmware-ax210/install
 	$(INSTALL_DIR) $(1)/lib/firmware

package/firmware/linux-firmware/marvell.mk

@@ -1,4 +1,4 @@
-Package/mwl8k-firmware = $(call Package/firmware-default,Marvell 8366/8687 firmware)
+Package/mwl8k-firmware = $(call Package/firmware-default,Marvell 8366/8687 firmware,,LICENCE.Marvell)
 define Package/mwl8k-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mwl8k
 	$(INSTALL_DATA) \
@@ -11,7 +11,7 @@ define Package/mwl8k-firmware/install
 endef
 $(eval $(call BuildPackage,mwl8k-firmware))
 
-Package/mwifiex-pcie-firmware = $(call Package/firmware-default,Marvell 8897 firmware)
+Package/mwifiex-pcie-firmware = $(call Package/firmware-default,Marvell 8897 firmware,,LICENCE.Marvell)
 define Package/mwifiex-pcie-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mrvl
 	$(INSTALL_DATA) \
@@ -20,7 +20,7 @@ define Package/mwifiex-pcie-firmware/install
 endef
 $(eval $(call BuildPackage,mwifiex-pcie-firmware))
 
-Package/mwifiex-sdio-firmware = $(call Package/firmware-default,Marvell 8887/8997 firmware)
+Package/mwifiex-sdio-firmware = $(call Package/firmware-default,Marvell 8887/8997 firmware,,LICENCE.Marvell)
 define Package/mwifiex-sdio-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mrvl
 	$(INSTALL_DATA) \
@@ -31,7 +31,7 @@ define Package/mwifiex-sdio-firmware/install
 endef
 $(eval $(call BuildPackage,mwifiex-sdio-firmware))
 
-Package/libertas-usb-firmware = $(call Package/firmware-default,Marvell 8388/8682 USB firmware)
+Package/libertas-usb-firmware = $(call Package/firmware-default,Marvell 8388/8682 USB firmware,,LICENCE.Marvell)
 define Package/libertas-usb-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/libertas
 	$(INSTALL_DATA) \
@@ -41,7 +41,7 @@ define Package/libertas-usb-firmware/install
 endef
 $(eval $(call BuildPackage,libertas-usb-firmware))
 
-Package/libertas-sdio-firmware = $(call Package/firmware-default,Marvell 8385/8686/8688 SDIO firmware)
+Package/libertas-sdio-firmware = $(call Package/firmware-default,Marvell 8385/8686/8688 SDIO firmware,,LICENCE.Marvell)
 define Package/libertas-sdio-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/libertas
 	$(INSTALL_DATA) \
@@ -60,7 +60,7 @@ define Package/libertas-sdio-firmware/install
 endef
 $(eval $(call BuildPackage,libertas-sdio-firmware))
 
-Package/libertas-spi-firmware = $(call Package/firmware-default,Marvell 8686 SPI firmware)
+Package/libertas-spi-firmware = $(call Package/firmware-default,Marvell 8686 SPI firmware,,LICENCE.Marvell)
 define Package/libertas-spi-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/libertas
 	$(INSTALL_DATA) \

package/firmware/linux-firmware/mediatek.mk

@@ -1,4 +1,4 @@
-Package/mt7601u-firmware = $(call Package/firmware-default,MediaTek MT7601U firmware)
+Package/mt7601u-firmware = $(call Package/firmware-default,MediaTek MT7601U firmware,,LICENCE.mediatek)
 define Package/mt7601u-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \
@@ -42,7 +42,7 @@ define Package/rt73-usb-firmware/install
 endef
 $(eval $(call BuildPackage,rt73-usb-firmware))
 
-Package/mt7622bt-firmware = $(call Package/firmware-default,mt7622bt firmware)
+Package/mt7622bt-firmware = $(call Package/firmware-default,mt7622bt firmware,,LICENCE.mediatek)
 define Package/mt7622bt-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \
@@ -51,7 +51,7 @@ define Package/mt7622bt-firmware/install
 endef
 $(eval $(call BuildPackage,mt7622bt-firmware))
 
-Package/mt7921bt-firmware = $(call Package/firmware-default,mt7921bt firmware)
+Package/mt7921bt-firmware = $(call Package/firmware-default,mt7921bt firmware,,LICENCE.mediatek)
 define Package/mt7921bt-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \
@@ -60,7 +60,7 @@ define Package/mt7921bt-firmware/install
 endef
 $(eval $(call BuildPackage,mt7921bt-firmware))
 
-Package/mt7922bt-firmware = $(call Package/firmware-default,mt7922bt firmware)
+Package/mt7922bt-firmware = $(call Package/firmware-default,mt7922bt firmware,,LICENCE.mediatek)
 define Package/mt7922bt-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \
@@ -69,7 +69,7 @@ define Package/mt7922bt-firmware/install
 endef
 $(eval $(call BuildPackage,mt7922bt-firmware))
 
-Package/mt7981-wo-firmware = $(call Package/firmware-default,MT7981 offload firmware)
+Package/mt7981-wo-firmware = $(call Package/firmware-default,MT7981 offload firmware,,LICENCE.mediatek)
 define Package/mt7981-wo-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \
@@ -78,7 +78,7 @@ define Package/mt7981-wo-firmware/install
 endef
 $(eval $(call BuildPackage,mt7981-wo-firmware))
 
-Package/mt7986-wo-firmware = $(call Package/firmware-default,MT7986 offload firmware)
+Package/mt7986-wo-firmware = $(call Package/firmware-default,MT7986 offload firmware,,LICENCE.mediatek)
 define Package/mt7986-wo-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \

package/firmware/linux-firmware/qca.mk

@@ -1,4 +1,4 @@
-Package/ar3k-firmware = $(call Package/firmware-default,ath3k firmware)
+Package/ar3k-firmware = $(call Package/firmware-default,ath3k firmware,,LICENSE.QualcommAtheros_ar3k)
 define Package/ar3k-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ar3k
 	$(CP) \
@@ -21,7 +21,7 @@ define Package/ath6k-firmware/install
 endef
 $(eval $(call BuildPackage,ath6k-firmware))
 
-Package/ath9k-htc-firmware = $(call Package/firmware-default,AR9271/AR7010 firmware)
+Package/ath9k-htc-firmware = $(call Package/firmware-default,AR9271/AR7010 firmware,,LICENCE.open-ath9k-htc-firmware)
 define Package/ath9k-htc-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath9k_htc
 	$(INSTALL_DATA) \
@@ -31,7 +31,7 @@ define Package/ath9k-htc-firmware/install
 endef
 $(eval $(call BuildPackage,ath9k-htc-firmware))
 
-Package/carl9170-firmware = $(call Package/firmware-default,AR9170 firmware)
+Package/carl9170-firmware = $(call Package/firmware-default,AR9170 firmware,,carl9170fw/GPL)
 define Package/carl9170-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/carl9170-1.fw $(1)/lib/firmware

package/firmware/linux-firmware/qca_ath10k.mk

@@ -1,4 +1,4 @@
-Package/ath10k-board-qca4019 = $(call Package/firmware-default,ath10k qca4019 board firmware)
+Package/ath10k-board-qca4019 = $(call Package/firmware-default,ath10k qca4019 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca4019/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
 	$(INSTALL_DATA) \
@@ -6,7 +6,7 @@ define Package/ath10k-board-qca4019/install
 		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/
 endef
 $(eval $(call BuildPackage,ath10k-board-qca4019))
-Package/ath10k-firmware-qca4019 = $(call Package/firmware-default,ath10k qca4019 firmware)
+Package/ath10k-firmware-qca4019 = $(call Package/firmware-default,ath10k qca4019 firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca4019/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
 	$(INSTALL_DATA) \
@@ -15,7 +15,7 @@ define Package/ath10k-firmware-qca4019/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca4019))
 
-Package/ath10k-board-qca9377 = $(call Package/firmware-default,ath10k qca9377 board firmware)
+Package/ath10k-board-qca9377 = $(call Package/firmware-default,ath10k qca9377 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca9377/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9377/hw1.0
 	$(INSTALL_DATA) \
@@ -23,7 +23,7 @@ define Package/ath10k-board-qca9377/install
 		$(1)/lib/firmware/ath10k/QCA9377/hw1.0/
 endef
 $(eval $(call BuildPackage,ath10k-board-qca9377))
-Package/ath10k-firmware-qca9377 = $(call Package/firmware-default,ath10k qca9377 firmware,+ath10k-board-qca9377)
+Package/ath10k-firmware-qca9377 = $(call Package/firmware-default,ath10k qca9377 firmware,+ath10k-board-qca9377,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca9377/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9377/hw1.0
 	$(INSTALL_DATA) \
@@ -32,7 +32,7 @@ define Package/ath10k-firmware-qca9377/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca9377))
 
-Package/ath10k-board-qca9887 = $(call Package/firmware-default,ath10k qca9887 board firmware)
+Package/ath10k-board-qca9887 = $(call Package/firmware-default,ath10k qca9887 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca9887/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
 	$(INSTALL_DATA) \
@@ -40,7 +40,7 @@ define Package/ath10k-board-qca9887/install
 		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
 endef
 $(eval $(call BuildPackage,ath10k-board-qca9887))
-Package/ath10k-firmware-qca9887 = $(call Package/firmware-default,ath10k qca9887 firmware,+ath10k-board-qca9887)
+Package/ath10k-firmware-qca9887 = $(call Package/firmware-default,ath10k qca9887 firmware,+ath10k-board-qca9887,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca9887/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
 	$(INSTALL_DATA) \
@@ -49,7 +49,7 @@ define Package/ath10k-firmware-qca9887/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca9887))
 
-Package/ath10k-board-qca9888 = $(call Package/firmware-default,ath10k qca9888 board firmware)
+Package/ath10k-board-qca9888 = $(call Package/firmware-default,ath10k qca9888 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca9888/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
 	$(INSTALL_DATA) \
@@ -57,7 +57,7 @@ define Package/ath10k-board-qca9888/install
 		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
 endef
 $(eval $(call BuildPackage,ath10k-board-qca9888))
-Package/ath10k-firmware-qca9888 = $(call Package/firmware-default,ath10k qca9888 firmware,+ath10k-board-qca9888)
+Package/ath10k-firmware-qca9888 = $(call Package/firmware-default,ath10k qca9888 firmware,+ath10k-board-qca9888,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca9888/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
 	$(INSTALL_DATA) \
@@ -66,7 +66,7 @@ define Package/ath10k-firmware-qca9888/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca9888))
 
-Package/ath10k-board-qca988x = $(call Package/firmware-default,ath10k qca988x board firmware)
+Package/ath10k-board-qca988x = $(call Package/firmware-default,ath10k qca988x board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca988x/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
 	$(INSTALL_DATA) \
@@ -74,7 +74,7 @@ define Package/ath10k-board-qca988x/install
 		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/
 endef
 $(eval $(call BuildPackage,ath10k-board-qca988x))
-Package/ath10k-firmware-qca988x = $(call Package/firmware-default,ath10k qca988x firmware,+ath10k-board-qca988x)
+Package/ath10k-firmware-qca988x = $(call Package/firmware-default,ath10k qca988x firmware,+ath10k-board-qca988x,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca988x/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
 	$(INSTALL_DATA) \
@@ -83,7 +83,7 @@ define Package/ath10k-firmware-qca988x/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca988x))
 
-Package/ath10k-firmware-qca6174 = $(call Package/firmware-default,ath10k qca6174 firmware)
+Package/ath10k-firmware-qca6174 = $(call Package/firmware-default,ath10k qca6174 firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca6174/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA6174/hw2.1
 	$(INSTALL_DATA) \
@@ -102,7 +102,7 @@ define Package/ath10k-firmware-qca6174/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca6174))
 
-Package/ath10k-board-qca99x0 = $(call Package/firmware-default,ath10k qca99x0 board firmware)
+Package/ath10k-board-qca99x0 = $(call Package/firmware-default,ath10k qca99x0 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca99x0/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
 	$(INSTALL_DATA) \
@@ -111,7 +111,7 @@ define Package/ath10k-board-qca99x0/install
 endef
 $(eval $(call BuildPackage,ath10k-board-qca99x0))
 
-Package/ath10k-firmware-qca99x0 = $(call Package/firmware-default,ath10k qca99x0 firmware,+ath10k-board-qca99x0)
+Package/ath10k-firmware-qca99x0 = $(call Package/firmware-default,ath10k qca99x0 firmware,+ath10k-board-qca99x0,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca99x0/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
 	$(INSTALL_DATA) \
@@ -120,7 +120,7 @@ define Package/ath10k-firmware-qca99x0/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca99x0))
 
-Package/ath10k-board-qca9984 = $(call Package/firmware-default,ath10k qca9984 board firmware)
+Package/ath10k-board-qca9984 = $(call Package/firmware-default,ath10k qca9984 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca9984/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
 	$(INSTALL_DATA) \
@@ -128,7 +128,7 @@ define Package/ath10k-board-qca9984/install
 		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
 endef
 $(eval $(call BuildPackage,ath10k-board-qca9984))
-Package/ath10k-firmware-qca9984 = $(call Package/firmware-default,ath10k qca9984 firmware,+ath10k-board-qca9984)
+Package/ath10k-firmware-qca9984 = $(call Package/firmware-default,ath10k qca9984 firmware,+ath10k-board-qca9984,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca9984/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
 	$(INSTALL_DATA) \

package/firmware/linux-firmware/qca_ath11k.mk

@@ -1,4 +1,4 @@
-Package/ath11k-firmware-qca6390 = $(call Package/firmware-default,QCA6390 ath11k firmware)
+Package/ath11k-firmware-qca6390 = $(call Package/firmware-default,QCA6390 ath11k firmware,,LICENCE.atheros_firmware)
 define Package/ath11k-firmware-qca6390/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/QCA6390/hw2.0
 	$(INSTALL_DATA) \
@@ -6,7 +6,7 @@ define Package/ath11k-firmware-qca6390/install
 endef
 $(eval $(call BuildPackage,ath11k-firmware-qca6390))
 
-Package/ath11k-firmware-wcn6750 = $(call Package/firmware-default,WCN6750 ath11k firmware)
+Package/ath11k-firmware-wcn6750 = $(call Package/firmware-default,WCN6750 ath11k firmware,,LICENCE.atheros_firmware)
 define Package/ath11k-firmware-wcn6750/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/WCN6750/hw1.0
 	$(INSTALL_DATA) \
@@ -14,7 +14,7 @@ define Package/ath11k-firmware-wcn6750/install
 endef
 $(eval $(call BuildPackage,ath11k-firmware-wcn6750))
 
-Package/ath11k-firmware-wcn6855 = $(call Package/firmware-default,WCN6855 ath11k firmware)
+Package/ath11k-firmware-wcn6855 = $(call Package/firmware-default,WCN6855 ath11k firmware,,LICENCE.atheros_firmware)
 define Package/ath11k-firmware-wcn6855/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/WCN6855/hw2.0
 	$(INSTALL_DATA) \

package/firmware/linux-firmware/realtek.mk

@@ -20,7 +20,7 @@ define Package/r8169-firmware/install
 endef
 $(eval $(call BuildPackage,r8169-firmware))
 
-Package/rtl8188eu-firmware = $(call Package/firmware-default,RealTek RTL8188EU firmware)
+Package/rtl8188eu-firmware = $(call Package/firmware-default,RealTek RTL8188EU firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8188eu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(CP) \
@@ -38,7 +38,7 @@ define Package/rtl8192ce-firmware/install
 endef
 $(eval $(call BuildPackage,rtl8192ce-firmware))
 
-Package/rtl8192cu-firmware = $(call Package/firmware-default,RealTek RTL8192CU firmware)
+Package/rtl8192cu-firmware = $(call Package/firmware-default,RealTek RTL8192CU firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8192cu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8192cufw.bin $(1)/lib/firmware/rtlwifi
@@ -48,28 +48,28 @@ define Package/rtl8192cu-firmware/install
 endef
 $(eval $(call BuildPackage,rtl8192cu-firmware))
 
-Package/rtl8192de-firmware = $(call Package/firmware-default,RealTek RTL8192DE firmware)
+Package/rtl8192de-firmware = $(call Package/firmware-default,RealTek RTL8192DE firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8192de-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8192defw.bin $(1)/lib/firmware/rtlwifi
 endef
 $(eval $(call BuildPackage,rtl8192de-firmware))
 
-Package/rtl8192eu-firmware = $(call Package/firmware-default,RealTek RTL8192EU firmware)
+Package/rtl8192eu-firmware = $(call Package/firmware-default,RealTek RTL8192EU firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8192eu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8192eu_nic.bin $(1)/lib/firmware/rtlwifi
 endef
 $(eval $(call BuildPackage,rtl8192eu-firmware))
 
-Package/rtl8192se-firmware = $(call Package/firmware-default,RealTek RTL8192SE firmware)
+Package/rtl8192se-firmware = $(call Package/firmware-default,RealTek RTL8192SE firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8192se-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8192sefw.bin $(1)/lib/firmware/rtlwifi
 endef
 $(eval $(call BuildPackage,rtl8192se-firmware))
 
-Package/rtl8723au-firmware = $(call Package/firmware-default,RealTek RTL8723AU firmware)
+Package/rtl8723au-firmware = $(call Package/firmware-default,RealTek RTL8723AU firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8723au-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8723aufw_A.bin $(1)/lib/firmware/rtlwifi
@@ -78,7 +78,7 @@ define Package/rtl8723au-firmware/install
 endef
 $(eval $(call BuildPackage,rtl8723au-firmware))
 
-Package/rtl8723bu-firmware = $(call Package/firmware-default,RealTek RTL8723BU firmware)
+Package/rtl8723bu-firmware = $(call Package/firmware-default,RealTek RTL8723BU firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8723bu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8723bu_nic.bin $(1)/lib/firmware/rtlwifi
@@ -109,10 +109,10 @@ define Package/rtl8761bu-firmware/install
 endef
 $(eval $(call BuildPackage,rtl8761bu-firmware))
 
-Package/rtl8821ae-firmware = $(call Package/firmware-default,RealTek RTL8821AE firmware)
+Package/rtl8821ae-firmware = $(call Package/firmware-default,RealTek RTL8821AE firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8821ae-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8821aefw.bin $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8821aefw_29.bin $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8821aefw_wowlan.bin $(1)/lib/firmware/rtlwifi
 endef
 $(eval $(call BuildPackage,rtl8821ae-firmware))

package/firmware/linux-firmware/ti.mk

@@ -1,4 +1,4 @@
-Package/wl12xx-firmware = $(call Package/firmware-default,TI WL12xx firmware)
+Package/wl12xx-firmware = $(call Package/firmware-default,TI WL12xx firmware,,LICENCE.ti-connectivity)
 define Package/wl12xx-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
 	$(INSTALL_DATA) \
@@ -15,7 +15,7 @@ define Package/wl12xx-firmware/install
 endef
 $(eval $(call BuildPackage,wl12xx-firmware))
 
-Package/wl18xx-firmware = $(call Package/firmware-default,TI WL18xx firmware)
+Package/wl18xx-firmware = $(call Package/firmware-default,TI WL18xx firmware,,LICENCE.ti-connectivity)
 define Package/wl18xx-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
 	$(INSTALL_DATA) \

package/firmware/wireless-regdb/Makefile

@@ -1,12 +1,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wireless-regdb
-PKG_VERSION:=2023.09.01
+PKG_VERSION:=2024.07.04
 PKG_RELEASE:=1
+PKG_LICENSE:=ISC
+PKG_LICENSE_FILES:=LICENSE
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
-PKG_HASH:=26d4c2a727cc59239b84735aad856b7c7d0b04e30aa5c235c4f7f47f5f053491
+PKG_HASH:=9832a14e1be24abff7be30dee3c9a1afb5fdfcf475a0d91aafef039f8d85f5eb
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
@@ -16,7 +18,7 @@ define Package/wireless-regdb
   PKGARCH:=all
   SECTION:=firmware
   CATEGORY:=Firmware
-  URL:=https://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git/
+  URL:=https://git.kernel.org/pub/scm/linux/kernel/git/wens/wireless-regdb.git/
   TITLE:=Wireless Regulatory Database
 endef
 

package/kernel/bcm27xx-gpu-fw/Makefile

@@ -2,8 +2,8 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=bcm27xx-gpu-fw
-PKG_VERSION:=2022-05-16
-PKG_RELEASE:=3673be308132de102fdff491d1333d9d0f823557
+PKG_VERSION:=2024-01-11
+PKG_RELEASE:=0968de28716a9b1f106b8492646d0ed0a2800152
 
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)/rpi-firmware-$(PKG_RELEASE)
 
@@ -26,7 +26,7 @@ define Download/bootcode_bin
   FILE:=$(RPI_FIRMWARE_FILE)-bootcode.bin
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=bootcode.bin
-  HASH:=69309823da13dc96b89e3d82b44f820e4f84efa79d207adad2c8784559794f03
+  HASH:=af603ebd97e7b692c30195563f7b25656eb05d57838cf1a715ebb470d1614ce4
 endef
 $(eval $(call Download,bootcode_bin))
 
@@ -34,7 +34,7 @@ define Download/fixup_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup.dat
-  HASH:=921f56c62ad1995addb984b156c869202dc5d46bbe9ebcbd02c20f0def9058e3
+  HASH:=c28ea955e672e374016dca61d63afa026490f0473a98115908586ab48e324aeb
 endef
 $(eval $(call Download,fixup_dat))
 
@@ -42,7 +42,7 @@ define Download/fixup_cd_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup_cd.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup_cd.dat
-  HASH:=83a985aa0d73844786f3b3bf674826c520212f6f72fc6a890f2ebb5f87de5d8c
+  HASH:=3cf1aef5f596ca106203ed5dac9ad45e85929ec55ce44c813588645e174442ec
 endef
 $(eval $(call Download,fixup_cd_dat))
 
@@ -50,7 +50,7 @@ define Download/fixup_x_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup_x.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup_x.dat
-  HASH:=8b00b00678adafe01e087240d156dbc87822e745b269be4f282596b69265cd1e
+  HASH:=56525c8feabde1ab86f36bb09bc55171659b2993f94132cf81ffc4293d62269d
 endef
 $(eval $(call Download,fixup_x_dat))
 
@@ -58,7 +58,7 @@ define Download/fixup4_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4.dat
-  HASH:=ef2b5d2a0a95ca48e00a1ce78b7650ee9e947cc1c588704c8ae30c1623122e2f
+  HASH:=615f8595801bf52373039f73ad5ad9513f83400d355eb1b2c075c7ae907e927c
 endef
 $(eval $(call Download,fixup4_dat))
 
@@ -66,7 +66,7 @@ define Download/fixup4cd_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4cd.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4cd.dat
-  HASH:=83a985aa0d73844786f3b3bf674826c520212f6f72fc6a890f2ebb5f87de5d8c
+  HASH:=3cf1aef5f596ca106203ed5dac9ad45e85929ec55ce44c813588645e174442ec
 endef
 $(eval $(call Download,fixup4cd_dat))
 
@@ -74,7 +74,7 @@ define Download/fixup4x_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4x.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4x.dat
-  HASH:=a6c4e30ada5a00fe7de83c460638ca824647651bb4a3644b8c65d7ba1d9f2d2b
+  HASH:=6d27a4b8ecb78cef9e1f03751b4aaec5ce8749d36988f381145a8a41dbf164ae
 endef
 $(eval $(call Download,fixup4x_dat))
 
@@ -82,7 +82,7 @@ define Download/start_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start.elf
-  HASH:=5455c148f4b8b04c553809bd22b995ee49ba5279ca3848df8bde6f80a388f7e0
+  HASH:=e8348e88522e7a1d0e2b0944ab66d7d8f4f30da98f326e2b3c123522e45f71b2
 endef
 $(eval $(call Download,start_elf))
 
@@ -90,7 +90,7 @@ define Download/start_cd_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start_cd.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start_cd.elf
-  HASH:=168c0a9178d5a3b4bd89ef770826a85b4ea3132560ba3600c212c0cec4c575c6
+  HASH:=c9b4de3f12bec7808868b898c49f656b5378ddc315f12ccab83d6519bad51680
 endef
 $(eval $(call Download,start_cd_elf))
 
@@ -98,7 +98,7 @@ define Download/start_x_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start_x.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start_x.elf
-  HASH:=30c6a7f32a25185053ca3ca9e4bcfe932246ed42a1b7c37f8803209f93d86404
+  HASH:=0b5c06c109984361eeed0ab14d146f686d8aa8da2025689b887e9cb098636db9
 endef
 $(eval $(call Download,start_x_elf))
 
@@ -106,7 +106,7 @@ define Download/start4_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4.elf
-  HASH:=be8bbff41dba2749b7b0e812f0a9d87a9122d18508f7b5ff3cd20f303d15bc07
+  HASH:=fedc4ecd72c9d21018e210240dcd2e41a8bb5f936fb5674c3351f2a447a22203
 endef
 $(eval $(call Download,start4_elf))
 
@@ -114,7 +114,7 @@ define Download/start4cd_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4cd.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4cd.elf
-  HASH:=000372e9cf6815ade595948dbd6328665f2a535eeee44e74b0ec8e56b6fbbf90
+  HASH:=ea22282a77666801378137a651e7e0b17cc186f63cdbdc8b9bb98749cd12b256
 endef
 $(eval $(call Download,start4cd_elf))
 
@@ -122,7 +122,7 @@ define Download/start4x_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4x.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4x.elf
-  HASH:=48895858f7936570dfab44c67bdcb0357ac8fcd630162c36ac9ed8f2de85c038
+  HASH:=c509e73a9cba7af3223dea885f58294bd04845e822aa3d6278500fa4dcdb112f
 endef
 $(eval $(call Download,start4x_elf))
 

package/kernel/lantiq/ltq-vmmc/Makefile

@@ -29,6 +29,7 @@ define KernelPackage/ltq-vmmc
   DEPENDS:=@(TARGET_lantiq_xway||TARGET_lantiq_xrx200) +kmod-ltq-tapi
   FILES:=$(PKG_BUILD_DIR)/src/drv_vmmc.ko
   AUTOLOAD:=$(call AutoProbe,drv_vmmc)
+  USERID:=:vmmc=386
 endef
 
 define KernelPackage/ltq-vmmc/description

package/kernel/lantiq/ltq-vmmc/files/vmmc.init

@@ -8,6 +8,7 @@ start() {
 	for i in 10 11 12 13 14 15 16 17 18; do
 		if ! [ -e /dev/vmmc$i ]; then
 			mknod -m 664 /dev/vmmc$i c 122 $i
+			chown root:vmmc /dev/vmmc$i
 		fi
 	done
 }

package/kernel/leds-gca230718/Makefile

@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2008-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=leds-gca230718
+PKG_RELEASE:=1
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/leds-gca230718
+  SUBMENU:=LED modules
+  TITLE:=GCA230718 LED support (e.g. for D-Link M30)
+  FILES:= \
+	$(PKG_BUILD_DIR)/leds-gca230718.ko
+  AUTOLOAD:=$(call AutoProbe,leds-gca230718,1)
+  DEPENDS:=@TARGET_mediatek_filogic
+endef
+
+define KernelPackage/leds-gca230718/description
+  GCA230718 LED support (e.g. for D-Link M30) using I2C.
+endef
+
+define Build/Compile
+	$(KERNEL_MAKE) M="$(PKG_BUILD_DIR)" modules
+endef
+
+$(eval $(call KernelPackage,leds-gca230718))

package/kernel/leds-gca230718/src/Makefile

@@ -0,0 +1 @@
+obj-m := leds-gca230718.o

package/kernel/leds-gca230718/src/leds-gca230718.c

@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GCA230718 LED support (e.g. for D-Link M30) using I2C
+ *
+ * Copyright 2022 Roland Reinl <reinlroland+github@gmail.com>
+ *
+ * This driver can control RGBW LEDs which are connected to a GCA230718.
+ */
+
+#include <linux/delay.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/version.h>
+
+#define GCA230718_MAX_LEDS                                      (4u)
+
+#define GCA230718_OPMODE_DISABLED                               (0x00u)
+#define GCA230718_OPMODE_NO_TOGGLE                              (0x01u)
+#define GCA230718_OPMODE_TOGGLE_RAMP_CONTROL_DISABLED           (0x02u)
+#define GCA230718_OPMODE_TOGGLE_RAMP_CONTROL_ENSABLED           (0x03u)
+
+#define GCA230718_1ST_SEQUENCE_BYTE_1                           (0x02u)
+#define GCA230718_2ND_SEQUENCE_BYTE_1                           (0x01u)
+#define GCA230718_3RD_SEQUENCE_BYTE_1                           (0x03u)
+
+struct gca230718_led
+{
+	enum led_brightness brightness;
+	struct i2c_client *client;
+	struct led_classdev ledClassDev;
+};
+
+struct gca230718_private
+{
+	struct mutex lock;
+	struct gca230718_led leds[GCA230718_MAX_LEDS];
+};
+
+static void gca230718_init_private_led_data(struct gca230718_private* data)
+{
+	u8 ledIndex;
+	for (ledIndex = 0; ledIndex < GCA230718_MAX_LEDS; ledIndex++)
+	{
+		data->leds[ledIndex].client = NULL;
+	}
+}
+
+static void gca230718_send_sequence(struct i2c_client *client, u8 byte0, struct gca230718_private* gca230718_privateData)
+{
+	int status = 0;
+	u8 ledIndex;
+	const u8 resetCommand[2] = { 0x81, 0xE4 };
+	const u8 resetCommandRegister = 0x00;
+
+	u8 controlCommand[13];
+	const u8 controlCommandRegister = 0x03;
+
+	controlCommand[0] = 0x0C; /* Unknown */
+	controlCommand[1] = byte0;
+	controlCommand[2] = GCA230718_OPMODE_NO_TOGGLE;
+	/* Byte 3-6 are set below to the brighness value of the individual LEDs */
+	controlCommand[7] = 0x01; /* Frequency, doesn't care as long as GCA230718_OPMODE_NO_TOGGLE is used above */
+	/* Byte 8-11 are set below to the brighness value of the individual LEDs */
+	controlCommand[12] = 0x87;
+
+	for (ledIndex = 0; ledIndex < GCA230718_MAX_LEDS; ledIndex++)
+	{
+		controlCommand[3 + ledIndex] = gca230718_privateData->leds[ledIndex].brightness;
+		controlCommand[8 + ledIndex] = gca230718_privateData->leds[ledIndex].brightness;
+	}
+
+	mutex_lock(&(gca230718_privateData->lock));
+
+	if ((status = i2c_smbus_write_i2c_block_data(client, resetCommandRegister, sizeof(resetCommand), resetCommand)) != 0)
+	{
+		pr_info("Error %i during call of i2c_smbus_write_i2c_block_data for reset command\n", status);
+	}
+	else if ((status = i2c_smbus_write_i2c_block_data(client, controlCommandRegister, sizeof(controlCommand), controlCommand)) != 0)
+	{
+		pr_info("Error %i during call of i2c_smbus_write_i2c_block_data for control command\n", status);
+	}
+
+	mutex_unlock(&(gca230718_privateData->lock));
+}
+
+static int gca230718_set_brightness(struct led_classdev *led_cdev, enum led_brightness value)
+{
+	struct gca230718_led* led;
+	struct i2c_client* client;
+
+	led = container_of(led_cdev, struct gca230718_led, ledClassDev);
+	client = led->client;
+
+	if (client != NULL)
+	{
+		struct gca230718_private* gca230718_privateData;
+
+		led->brightness = value;
+		gca230718_privateData = i2c_get_clientdata(client);
+
+		gca230718_send_sequence(client, GCA230718_2ND_SEQUENCE_BYTE_1, gca230718_privateData);
+	}
+
+	return 0;
+}
+
+static int gca230718_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	int status = 0;
+	struct gca230718_private* gca230718_privateData;
+
+	pr_info("Enter gca230718_probe for device address %u\n", client->addr);
+	gca230718_privateData = devm_kzalloc(&(client->dev), sizeof(struct gca230718_private), GFP_KERNEL);
+
+	if (gca230718_privateData == NULL)
+	{
+		pr_info("Error during allocating memory for private data\n");
+		status = -ENOMEM;
+	}
+	else
+	{
+		struct device_node* ledNode;
+		mutex_init(&gca230718_privateData->lock);
+		gca230718_init_private_led_data(gca230718_privateData);
+		i2c_set_clientdata(client, gca230718_privateData);
+
+		for_each_child_of_node(client->dev.of_node, ledNode)
+		{
+			u32 regValue = 0;
+			if (of_property_read_u32(ledNode, "reg", &regValue) != 0)
+			{
+				pr_info("Missing entry \"reg\" in node %s\n", ledNode->name); 
+			}
+			else if (regValue >= GCA230718_MAX_LEDS)
+			{
+				pr_info("Invalid entry \"reg\" in node %s (%u)\n", ledNode->name, regValue);
+			}
+			else
+			{
+				struct led_classdev* ledClassDev = &(gca230718_privateData->leds[regValue].ledClassDev);
+				struct led_init_data init_data = {};
+
+				gca230718_privateData->leds[regValue].client = client;
+				init_data.fwnode = of_fwnode_handle(ledNode);
+
+				pr_info("Creating LED for node %s: reg=%u\n", ledNode->name, regValue); 
+
+				ledClassDev->name = of_get_property(ledNode, "label", NULL);
+				if (ledClassDev->name == NULL)
+				{
+					ledClassDev->name = ledNode->name;
+				}
+
+				ledClassDev->brightness = LED_OFF;
+				ledClassDev->max_brightness = LED_FULL;
+				ledClassDev->brightness_set_blocking = gca230718_set_brightness;
+	
+				if (devm_led_classdev_register_ext(&(client->dev), ledClassDev, &init_data) != 0)
+				{
+					pr_info("Error during call of devm_led_classdev_register_ext");
+				}
+			}
+		}
+	}
+
+	if (status == 0)
+	{
+		/* 
+		Send full initialization sequence.
+		Afterwards only GCA230718_2ND_SEQUENCE_BYTE_1 must be send to upddate the brightness values.
+		*/
+		gca230718_send_sequence(client, GCA230718_1ST_SEQUENCE_BYTE_1, gca230718_privateData);
+		gca230718_send_sequence(client, GCA230718_2ND_SEQUENCE_BYTE_1, gca230718_privateData);
+		gca230718_send_sequence(client, GCA230718_3RD_SEQUENCE_BYTE_1, gca230718_privateData);
+	}
+
+	return status;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,18,0)
+static void gca230718_remove(struct i2c_client *client)
+#else
+static int gca230718_remove(struct i2c_client *client)
+#endif
+{
+	struct gca230718_private* gca230718_privateData;
+	gca230718_privateData = i2c_get_clientdata(client);
+	mutex_destroy(&gca230718_privateData->lock);
+	gca230718_init_private_led_data(gca230718_privateData);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,18,0)
+	return 0;
+#endif
+}
+
+static const struct i2c_device_id gca230718_i2c_ids[] = {
+	{ "gca230718", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, gca230718_i2c_ids);
+
+static const struct of_device_id gca230718_dt_ids[] = {
+	{ .compatible = "unknown,gca230718" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, gca230718_dt_ids);
+
+static struct i2c_driver gca230718_driver = {
+	.probe		= gca230718_probe,
+	.remove		= gca230718_remove,
+	.id_table	= gca230718_i2c_ids,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= gca230718_dt_ids,
+	},
+};
+
+module_i2c_driver(gca230718_driver);
+
+MODULE_AUTHOR("Roland Reinl <reinlroland+github@gmail.com>");
+MODULE_DESCRIPTION("GCA230718 LED support (e.g. for D-Link M30) using I2C");
+MODULE_LICENSE("GPL");

package/kernel/linux/Makefile

@@ -16,8 +16,8 @@ SUBTARGETS = $(sort $(filter-out feeds,$(notdir $(wildcard $(TOPDIR)/target/linu
 SUBTARGET_MODULES = $(foreach t,$(SUBTARGETS),$(firstword $(wildcard $(TOPDIR)/target/linux/feeds/$(t)/modules.mk $(TOPDIR)/target/linux/$(t)/modules.mk)))
 SCAN_DEPS=modules/*.mk $(SUBTARGET_MODULES) $(TOPDIR)/include/netfilter.mk
 
-PKG_LICENSE:=GPL-2.0
-PKG_LICENSE_FILES:=
+PKG_LICENSE:=GPL-2.0-only
+PKG_LICENSE_FILES:=COPYING
 
 export SHELL:=/bin/sh
 .ONESHELL:

package/kernel/linux/modules/crypto.mk

@@ -80,6 +80,18 @@ endef
 $(eval $(call KernelPackage,crypto-authenc))
 
 
+define KernelPackage/crypto-blake2b
+  TITLE:=Support for BLAKE2b cryptographic hash function (RFC 7693)
+  DEPENDS:=+kmod-crypto-hash
+  KCONFIG:=CONFIG_CRYPTO_BLAKE2B
+  FILES:=$(LINUX_DIR)/crypto/blake2b_generic.ko
+  AUTOLOAD:=$(call AutoLoad,09,blake2b_generic)
+  $(call AddDepends/crypto)
+endef
+
+$(eval $(call KernelPackage,crypto-blake2b))
+
+
 define KernelPackage/crypto-cbc
   TITLE:=Cipher Block Chaining CryptoAPI module
   DEPENDS:=+kmod-crypto-manager
@@ -700,7 +712,6 @@ define KernelPackage/crypto-misc
 	CONFIG_CRYPTO_CAMELLIA \
 	CONFIG_CRYPTO_CAST5 \
 	CONFIG_CRYPTO_CAST6 \
-	CONFIG_CRYPTO_FCRYPT \
 	CONFIG_CRYPTO_KHAZAD \
 	CONFIG_CRYPTO_SERPENT \
 	CONFIG_CRYPTO_TEA \
@@ -1041,3 +1052,15 @@ endef
 
 $(eval $(call KernelPackage,crypto-xts))
 
+
+define KernelPackage/crypto-xxhash
+  TITLE:=xxHash non-cryptographic hash algorithm
+  DEPENDS:=+kmod-crypto-hash +kmod-lib-xxhash
+  KCONFIG:=CONFIG_CRYPTO_XXHASH
+  FILES:=$(LINUX_DIR)/crypto/xxhash_generic.ko
+  AUTOLOAD:=$(call AutoLoad,09,xxhash_generic)
+  $(call AddDepends/crypto)
+endef
+
+$(eval $(call KernelPackage,crypto-xxhash))
+

package/kernel/linux/modules/fs.mk

@@ -67,7 +67,7 @@ $(eval $(call KernelPackage,fs-autofs4))
 define KernelPackage/fs-btrfs
   SUBMENU:=$(FS_MENU)
   TITLE:=BTRFS filesystem support
-  DEPENDS:=+kmod-lib-crc32c +kmod-lib-lzo +kmod-lib-zlib-inflate +kmod-lib-zlib-deflate +kmod-lib-raid6 +kmod-lib-xor +kmod-lib-zstd
+  DEPENDS:=+kmod-lib-crc32c +kmod-lib-lzo +kmod-lib-zlib-inflate +kmod-lib-zlib-deflate +kmod-lib-raid6 +kmod-lib-xor +kmod-lib-zstd +kmod-crypto-blake2b +kmod-crypto-xxhash
   KCONFIG:=\
 	CONFIG_BTRFS_FS \
 	CONFIG_BTRFS_FS_CHECK_INTEGRITY=n
@@ -352,8 +352,7 @@ define KernelPackage/fs-ksmbd
   DEPENDS:= \
 	  +kmod-nls-base \
 	  +kmod-nls-utf8 \
-	  +kmod-crypto-md4 \
-          +kmod-crypto-md5 \
+	  +kmod-crypto-md5 \
 	  +kmod-crypto-hmac \
 	  +kmod-crypto-ecb \
 	  +kmod-crypto-des \

package/kernel/linux/modules/hwmon.mk

@@ -116,7 +116,7 @@ define KernelPackage/hwmon-gsc
 	$(LINUX_DIR)/drivers/mfd/gateworks-gsc.ko \
 	$(LINUX_DIR)/drivers/hwmon/gsc-hwmon.ko
   AUTOLOAD:=$(call AutoLoad,20,gsc-hwmon,1)
-  $(call AddDepends/hwmon,+kmod-i2c-core)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-mfd)
 endef
 
 define KernelPackage/hwmon-gsc/description

package/kernel/linux/modules/leds.mk

@@ -245,3 +245,37 @@ define KernelPackage/input-leds/description
 endef
 
 $(eval $(call KernelPackage,input-leds))
+
+
+define KernelPackage/leds-lp55xx-common
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=LED common driver for LP5521/LP5523/LP55231/LP5562 controllers
+  DEPENDS:=+kmod-i2c-core
+  KCONFIG:=CONFIG_LEDS_LP55XX_COMMON
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-lp55xx-common.ko
+  AUTOLOAD:=$(call AutoLoad,60,leds-lp55xx-common,1)
+endef
+
+define KernelPackage/leds-lp55xx-common/description
+ This option enables support for Texas Instruments
+ LP5521/LP5523/LP55231/LP5562 common driver.
+endef
+
+$(eval $(call KernelPackage,leds-lp55xx-common))
+
+
+define KernelPackage/leds-lp5562
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=LED driver for LP5562 controllers
+  DEPENDS:=+kmod-i2c-core +kmod-leds-lp55xx-common
+  KCONFIG:=CONFIG_LEDS_LP5562
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-lp5562.ko
+  AUTOLOAD:=$(call AutoLoad,60,leds-lp5562,1)
+endef
+
+define KernelPackage/leds-lp5562/description
+ This option enables support for Texas Instruments LP5562
+ LED controllers.
+endef
+
+$(eval $(call KernelPackage,leds-lp5562))

package/kernel/linux/modules/lib.mk

@@ -122,21 +122,30 @@ endef
 $(eval $(call KernelPackage,lib-lzo))
 
 
+define KernelPackage/lib-xxhash
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=xxhash support
+  HIDDEN:=1
+  KCONFIG:=CONFIG_XXHASH
+  FILES:=$(LINUX_DIR)/lib/xxhash.ko
+endef
+
+$(eval $(call KernelPackage,lib-xxhash))
+
+
 define KernelPackage/lib-zstd
   SUBMENU:=$(LIB_MENU)
   TITLE:=ZSTD support
-  DEPENDS:=+kmod-crypto-acompress
+  DEPENDS:=+kmod-crypto-acompress +kmod-lib-xxhash
   KCONFIG:= \
 	CONFIG_CRYPTO_ZSTD \
 	CONFIG_ZSTD_COMPRESS \
-	CONFIG_ZSTD_DECOMPRESS \
-	CONFIG_XXHASH
+	CONFIG_ZSTD_DECOMPRESS
   FILES:= \
 	$(LINUX_DIR)/crypto/zstd.ko \
-	$(LINUX_DIR)/lib/xxhash.ko \
 	$(LINUX_DIR)/lib/zstd/zstd_compress.ko \
 	$(LINUX_DIR)/lib/zstd/zstd_decompress.ko
-  AUTOLOAD:=$(call AutoProbe,xxhash zstd zstd_compress zstd_decompress)
+  AUTOLOAD:=$(call AutoProbe,zstd zstd_compress zstd_decompress)
 endef
 
 define KernelPackage/lib-zstd/description
@@ -146,21 +155,28 @@ endef
 $(eval $(call KernelPackage,lib-zstd))
 
 
+define KernelPackage/lib-lz4-decompress
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=LZ4 decompress
+  HIDDEN:=1
+  KCONFIG:=CONFIG_LZ4_DECOMPRESS
+  FILES:=$(LINUX_DIR)/lib/lz4/lz4_decompress.ko
+endef
+
+$(eval $(call KernelPackage,lib-lz4-decompress))
+
+
 define KernelPackage/lib-lz4
   SUBMENU:=$(LIB_MENU)
   TITLE:=LZ4 support
-  DEPENDS:=+kmod-crypto-acompress
+  DEPENDS:=+kmod-crypto-acompress +kmod-lib-lz4-decompress
   KCONFIG:= \
 	CONFIG_CRYPTO_LZ4 \
-	CONFIG_CRYPTO_LZ4HC \
-	CONFIG_LZ4_COMPRESS \
-	CONFIG_LZ4_DECOMPRESS
+	CONFIG_LZ4_COMPRESS
   FILES:= \
 	$(LINUX_DIR)/crypto/lz4.ko \
-	$(LINUX_DIR)/lib/lz4/lz4_compress.ko \
-	$(LINUX_DIR)/lib/lz4/lz4hc_compress.ko \
-	$(LINUX_DIR)/lib/lz4/lz4_decompress.ko
-  AUTOLOAD:=$(call AutoProbe,lz4 lz4_compress lz4hc_compress lz4_decompress)
+	$(LINUX_DIR)/lib/lz4/lz4_compress.ko
+  AUTOLOAD:=$(call AutoProbe,lz4 lz4_compress)
 endef
 
 define KernelPackage/lib-lz4/description
@@ -170,6 +186,26 @@ endef
 $(eval $(call KernelPackage,lib-lz4))
 
 
+define KernelPackage/lib-lz4hc
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=LZ4HC support
+  DEPENDS:=+kmod-crypto-acompress +kmod-lib-lz4-decompress
+  KCONFIG:= \
+	CONFIG_CRYPTO_LZ4HC \
+	CONFIG_LZ4HC_COMPRESS
+  FILES:= \
+	$(LINUX_DIR)/crypto/lz4hc.ko \
+	$(LINUX_DIR)/lib/lz4/lz4hc_compress.ko
+  AUTOLOAD:=$(call AutoProbe,lz4hc lz4hc_compress)
+endef
+
+define KernelPackage/lib-lz4hc/description
+ Kernel module for LZ4HC compression/decompression support
+endef
+
+$(eval $(call KernelPackage,lib-lz4hc))
+
+
 define KernelPackage/lib-842
   SUBMENU:=$(LIB_MENU)
   TITLE:=842 support

package/kernel/linux/modules/netdevices.mk

@@ -361,9 +361,9 @@ $(eval $(call KernelPackage,phy-smsc))
 define KernelPackage/phy-aquantia
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Aquantia Ethernet PHYs
-  DEPENDS:=+kmod-libphy +kmod-hwmon-core
+  DEPENDS:=+kmod-libphy +kmod-hwmon-core +kmod-lib-crc-ccitt
   KCONFIG:=CONFIG_AQUANTIA_PHY
-  FILES:=$(LINUX_DIR)/drivers/net/phy/aquantia.ko
+  FILES:=$(LINUX_DIR)/drivers/net/phy/aquantia/aquantia.ko
   AUTOLOAD:=$(call AutoLoad,18,aquantia,1)
 endef
 

package/kernel/linux/modules/netfilter.mk

@@ -132,6 +132,22 @@ endef
 $(eval $(call KernelPackage,nf-conntrack6))
 
 
+define KernelPackage/nf-dup-inet
+  SUBMENU:=$(NF_MENU)
+  TITLE:=Netfilter nf_tables dup in ip/ip6/inet family support
+  HIDDEN:=1
+  DEPENDS:=+kmod-nf-conntrack +IPV6:kmod-nf-conntrack6
+  KCONFIG:= \
+	CONFIG_NF_DUP_IPV4 \
+	CONFIG_NF_DUP_IPV6
+  FILES:= \
+	$(LINUX_DIR)/net/ipv4/netfilter/nf_dup_ipv4.ko \
+	$(LINUX_DIR)/net/ipv6/netfilter/nf_dup_ipv6.ko
+endef
+
+$(eval $(call KernelPackage,nf-dup-inet))
+
+
 define KernelPackage/nf-log
   SUBMENU:=$(NF_MENU)
   TITLE:=Netfilter Logging
@@ -716,7 +732,7 @@ $(eval $(call KernelPackage,ipt-tproxy))
 
 define KernelPackage/ipt-tee
   TITLE:=TEE support
-  DEPENDS:=+kmod-ipt-conntrack
+  DEPENDS:=+kmod-ipt-conntrack +kmod-nf-dup-inet
   KCONFIG:=$(KCONFIG_IPT_TEE)
   FILES:=$(foreach mod,$(IPT_TEE-m),$(LINUX_DIR)/net/$(mod).ko)
   AUTOLOAD:=$(call AutoProbe,$(notdir nf_tee $(IPT_TEE-m)))
@@ -1150,18 +1166,14 @@ $(eval $(call KernelPackage,nft-bridge))
 define KernelPackage/nft-dup-inet
   SUBMENU:=$(NF_MENU)
   TITLE:=Netfilter nf_tables dup in ip/ip6/inet family support
-  DEPENDS:=+kmod-nft-core +kmod-nf-conntrack +IPV6:kmod-nf-conntrack6
+  DEPENDS:=+kmod-nft-core +kmod-nf-dup-inet
   KCONFIG:= \
-	CONFIG_NF_DUP_IPV4 \
-	CONFIG_NF_DUP_IPV6 \
 	CONFIG_NFT_DUP_IPV4 \
 	CONFIG_NFT_DUP_IPV6
   FILES:= \
-	$(LINUX_DIR)/net/ipv4/netfilter/nf_dup_ipv4.ko \
-	$(LINUX_DIR)/net/ipv6/netfilter/nf_dup_ipv6.ko \
 	$(LINUX_DIR)/net/ipv4/netfilter/nft_dup_ipv4.ko \
 	$(LINUX_DIR)/net/ipv6/netfilter/nft_dup_ipv6.ko
-  AUTOLOAD:=$(call AutoProbe,nf_dup_ipv4 nf_dup_ipv6 nft_dup_ipv4 nft_dup_ipv6)
+  AUTOLOAD:=$(call AutoProbe,nft_dup_ipv4 nft_dup_ipv6)
 endef
 
 $(eval $(call KernelPackage,nft-dup-inet))

package/kernel/linux/modules/netsupport.mk

@@ -993,7 +993,7 @@ endef
 $(eval $(call KernelPackage,bpf-test))
 
 
-SCHED_MODULES_EXTRA = sch_codel sch_dsmark sch_gred sch_multiq sch_sfq sch_teql sch_fq act_pedit act_simple act_csum em_cmp em_nbyte em_meta em_text
+SCHED_MODULES_EXTRA = sch_codel sch_gred sch_multiq sch_sfq sch_teql sch_fq act_pedit act_simple act_csum em_cmp em_nbyte em_meta em_text
 SCHED_FILES_EXTRA = $(foreach mod,$(SCHED_MODULES_EXTRA),$(LINUX_DIR)/net/sched/$(mod).ko)
 
 define KernelPackage/sched
@@ -1002,7 +1002,6 @@ define KernelPackage/sched
   DEPENDS:=+kmod-sched-core +kmod-lib-crc32c +kmod-lib-textsearch
   KCONFIG:= \
 	CONFIG_NET_SCH_CODEL \
-	CONFIG_NET_SCH_DSMARK \
 	CONFIG_NET_SCH_GRED \
 	CONFIG_NET_SCH_MULTIQ \
 	CONFIG_NET_SCH_SFQ \

package/kernel/linux/modules/other.mk

@@ -780,6 +780,18 @@ endef
 $(eval $(call KernelPackage,rtc-s35390a))
 
 
+define KernelPackage/mfd
+  SUBMENU:=$(OTHER_MENU)
+  TITLE:=Multifunction device drivers
+  HIDDEN:=1
+  KCONFIG:=CONFIG_MFD_CORE
+  FILES:=$(LINUX_DIR)/drivers/mfd/mfd-core.ko
+  AUTOLOAD:=$(call AutoLoad,10,mfd-core)
+endef
+
+$(eval $(call KernelPackage,mfd))
+
+
 define KernelPackage/mtdtests
   SUBMENU:=$(OTHER_MENU)
   TITLE:=MTD subsystem tests

package/kernel/mac80211/Makefile

@@ -10,11 +10,13 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=6.1.24
-PKG_RELEASE:=3
-# PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.15.58/
-PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources/
-PKG_HASH:=5d39aca7e34c33cb9b3e366117b2e86841b7bdd37933679d6b1e61be6b150648
+PKG_VERSION:=6.1.97-1
+PKG_RELEASE:=1
+PKG_LICENSE:=GPL-2.0-only
+PKG_LICENSE_FILES:=COPYING
+
+PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v6.1.97/
+PKG_HASH:=8e9ae2d02f373252dd61f5c6a81c88eec67ca773464d9ef3d844752dc6775540
 
 PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)
@@ -299,17 +301,14 @@ define Build/Prepare
 	$(Build/Patch)
 	rm -rf \
 		$(PKG_BUILD_DIR)/include/linux/ssb \
-		$(PKG_BUILD_DIR)/include/linux/bcma \
-		$(PKG_BUILD_DIR)/include/net/bluetooth
+		$(PKG_BUILD_DIR)/include/linux/bcma
 
 	rm -f \
-		$(PKG_BUILD_DIR)/include/linux/cordic.h \
-		$(PKG_BUILD_DIR)/include/linux/crc8.h \
-		$(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h \
-		$(PKG_BUILD_DIR)/include/linux/wl12xx.h \
 		$(PKG_BUILD_DIR)/include/linux/mhi.h \
-		$(PKG_BUILD_DIR)/include/net/ieee80211.h \
-		$(PKG_BUILD_DIR)/backport-include/linux/bcm47xx_nvram.h
+		$(PKG_BUILD_DIR)/include/trace/events/qrtr.h \
+		$(PKG_BUILD_DIR)/include/net/rsi_91x.h \
+		$(PKG_BUILD_DIR)/backport-include/linux/platform_data/brcmnand.h \
+		$(PKG_BUILD_DIR)/backport-include/linux/soc/mediatek/mtk_wed.h
 
 	echo 'compat-wireless-$(PKG_VERSION)-$(PKG_RELEASE)-$(REVISION)' > $(PKG_BUILD_DIR)/compat_version
 endef
@@ -325,7 +324,6 @@ endif
 ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
   ifeq ($(strip $(CONFIG_KERNEL_GIT_CLONE_URI)),"")
     define Build/Configure
-	  cmp $(PKG_BUILD_DIR)/include/linux/ath9k_platform.h $(LINUX_DIR)/include/linux/ath9k_platform.h
 	  cmp $(PKG_BUILD_DIR)/include/linux/ath5k_platform.h $(LINUX_DIR)/include/linux/ath5k_platform.h
 	  cmp $(PKG_BUILD_DIR)/include/linux/rt2x00_platform.h $(LINUX_DIR)/include/linux/rt2x00_platform.h
     endef

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -145,7 +145,7 @@ mac80211_hostapd_setup_base() {
 	[ "$auto_channel" = 0 ] && [ -z "$channel_list" ] && \
 		channel_list="$channel"
 
-	[ "$min_tx_power" -gt 0 ] && append base_cfg "min_tx_power=$min_tx_power"
+	[ "$min_tx_power" -gt 0 ] && append base_cfg "min_tx_power=$min_tx_power" "$N"
 
 	set_default noscan 0
 
@@ -269,6 +269,7 @@ mac80211_hostapd_setup_base() {
 				case "$channel" in
 					36|40|44|48|52|56|60|64) idx=50;;
 					100|104|108|112|116|120|124|128) idx=114;;
+					149|153|157|161|165|169|173|177) idx=163;;
 				esac
 			fi
 			enable_ac=1
@@ -327,6 +328,11 @@ mac80211_hostapd_setup_base() {
 		[ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
 		vht_cap="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))"
 
+		[ "$vht_oper_chwidth" -lt 2 ] && {
+			vht160=0
+			short_gi_160=0
+		}
+
 		mac80211_add_capabilities vht_capab $vht_cap \
 			RXLDPC:0x10::$rxldpc \
 			SHORT-GI-80:0x20::$short_gi_80 \
@@ -423,9 +429,9 @@ mac80211_hostapd_setup_base() {
 			he_bss_color:128 \
 			he_bss_color_enabled:1
 
-		he_phy_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: AP/,$p' | awk -F "[()]" '/HE PHY Capabilities/ { print $2 }' | head -1)
+		he_phy_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: .*AP/,$p' | awk -F "[()]" '/HE PHY Capabilities/ { print $2 }' | head -1)
 		he_phy_cap=${he_phy_cap:2}
-		he_mac_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: AP/,$p' | awk -F "[()]" '/HE MAC Capabilities/ { print $2 }' | head -1)
+		he_mac_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: .*AP/,$p' | awk -F "[()]" '/HE MAC Capabilities/ { print $2 }' | head -1)
 		he_mac_cap=${he_mac_cap:2}
 
 		append base_cfg "ieee80211ax=1" "$N"

package/kernel/mac80211/patches/ath/400-ath_move_debug_code.patch

@@ -14,7 +14,7 @@
  CFLAGS_trace.o := -I$(src)
 --- a/drivers/net/wireless/ath/ath.h
 +++ b/drivers/net/wireless/ath/ath.h
-@@ -317,14 +317,7 @@ void _ath_dbg(struct ath_common *common,
+@@ -321,14 +321,7 @@ void _ath_dbg(struct ath_common *common,
  #endif /* CPTCFG_ATH_DEBUG */
  
  /** Returns string describing opmode, or NULL if unknown mode. */

package/kernel/mac80211/patches/ath/402-ath_regd_optional.patch

@@ -82,7 +82,7 @@
  	help
 --- a/local-symbols
 +++ b/local-symbols
-@@ -102,6 +102,7 @@ ADM8211=
+@@ -94,6 +94,7 @@ ADM8211=
  ATH_COMMON=
  WLAN_VENDOR_ATH=
  ATH_DEBUG=

package/kernel/mac80211/patches/ath/404-regd_no_assoc_hints.patch

@@ -1,6 +1,6 @@
 --- a/net/wireless/reg.c
 +++ b/net/wireless/reg.c
-@@ -3370,6 +3370,8 @@ void regulatory_hint_country_ie(struct w
+@@ -3373,6 +3373,8 @@ void regulatory_hint_country_ie(struct w
  	enum environment_cap env = ENVIRON_ANY;
  	struct regulatory_request *request = NULL, *lr;
  
@@ -9,7 +9,7 @@
  	/* IE len must be evenly divisible by 2 */
  	if (country_ie_len & 0x01)
  		return;
-@@ -3621,6 +3623,7 @@ static bool is_wiphy_all_set_reg_flag(en
+@@ -3624,6 +3626,7 @@ static bool is_wiphy_all_set_reg_flag(en
  
  void regulatory_hint_disconnect(void)
  {

package/kernel/mac80211/patches/ath10k/080-ath10k_thermal_config.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath10k/Kconfig
 +++ b/drivers/net/wireless/ath/ath10k/Kconfig
-@@ -86,6 +86,12 @@ config ATH10K_TRACING
+@@ -87,6 +87,12 @@ config ATH10K_TRACING
  	help
  	  Select this to ath10k use tracing infrastructure.
  
@@ -37,7 +37,7 @@
  void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature);
 --- a/local-symbols
 +++ b/local-symbols
-@@ -161,6 +161,7 @@ ATH10K_SNOC=
+@@ -153,6 +153,7 @@ ATH10K_SNOC=
  ATH10K_DEBUG=
  ATH10K_DEBUGFS=
  ATH10K_SPECTRAL=

package/kernel/mac80211/patches/ath10k/921-ath10k_init_devices_synchronously.patch

@@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
 
 --- a/drivers/net/wireless/ath/ath10k/core.c
 +++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -3516,6 +3516,16 @@ int ath10k_core_register(struct ath10k *
+@@ -3510,6 +3510,16 @@ int ath10k_core_register(struct ath10k *
  
  	queue_work(ar->workqueue, &ar->register_work);
  

package/kernel/mac80211/patches/ath10k/930-ath10k_add_tpt_led_trigger.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -9909,6 +9909,21 @@ static int ath10k_mac_init_rd(struct ath
+@@ -9918,6 +9918,21 @@ static int ath10k_mac_init_rd(struct ath
  	return 0;
  }
  
@@ -22,7 +22,7 @@
  int ath10k_mac_register(struct ath10k *ar)
  {
  	static const u32 cipher_suites[] = {
-@@ -10267,6 +10282,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10276,6 +10291,12 @@ int ath10k_mac_register(struct ath10k *a
  
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  

package/kernel/mac80211/patches/ath10k/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -85,7 +85,7 @@ v13:
  create mode 100644 drivers/net/wireless/ath/ath10k/leds.h
 --- a/drivers/net/wireless/ath/ath10k/Kconfig
 +++ b/drivers/net/wireless/ath/ath10k/Kconfig
-@@ -71,6 +71,16 @@ config ATH10K_DEBUGFS
+@@ -72,6 +72,16 @@ config ATH10K_DEBUGFS
  
  	  If unsure, say Y to make it easier to debug problems.
  
@@ -114,7 +114,7 @@ v13:
  ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o
 --- a/local-symbols
 +++ b/local-symbols
-@@ -162,6 +162,7 @@ ATH10K_DEBUG=
+@@ -154,6 +154,7 @@ ATH10K_DEBUG=
  ATH10K_DEBUGFS=
  ATH10K_SPECTRAL=
  ATH10K_THERMAL=
@@ -172,7 +172,7 @@ v13:
  		.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
  		.uart_pin = 7,
  		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
-@@ -3231,6 +3237,10 @@ int ath10k_core_start(struct ath10k *ar,
+@@ -3225,6 +3231,10 @@ int ath10k_core_start(struct ath10k *ar,
  		goto err_hif_stop;
  	}
  
@@ -183,7 +183,7 @@ v13:
  	return 0;
  
  err_hif_stop:
-@@ -3489,9 +3499,18 @@ static void ath10k_core_register_work(st
+@@ -3483,9 +3493,18 @@ static void ath10k_core_register_work(st
  		goto err_spectral_destroy;
  	}
  
@@ -202,7 +202,7 @@ v13:
  err_spectral_destroy:
  	ath10k_spectral_destroy(ar);
  err_debug_destroy:
-@@ -3537,6 +3556,8 @@ void ath10k_core_unregister(struct ath10
+@@ -3531,6 +3550,8 @@ void ath10k_core_unregister(struct ath10
  	if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
  		return;
  
@@ -221,7 +221,7 @@ v13:
  
  #include "htt.h"
  #include "htc.h"
-@@ -1253,6 +1254,13 @@ struct ath10k {
+@@ -1256,6 +1257,13 @@ struct ath10k {
  	} testmode;
  
  	struct {
@@ -237,7 +237,7 @@ v13:
  		u32 fw_crash_counter;
 --- a/drivers/net/wireless/ath/ath10k/hw.h
 +++ b/drivers/net/wireless/ath/ath10k/hw.h
-@@ -519,6 +519,7 @@ struct ath10k_hw_params {
+@@ -520,6 +520,7 @@ struct ath10k_hw_params {
  	const char *name;
  	u32 patch_load_addr;
  	int uart_pin;
@@ -456,7 +456,7 @@ v13:
  {
 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
 +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
-@@ -4594,6 +4594,8 @@ static const struct wmi_ops wmi_tlv_ops
+@@ -4598,6 +4598,8 @@ static const struct wmi_ops wmi_tlv_ops
  	.gen_echo = ath10k_wmi_tlv_op_gen_echo,
  	.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
  	.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
@@ -467,7 +467,7 @@ v13:
  static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
 --- a/drivers/net/wireless/ath/ath10k/wmi.c
 +++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -7472,6 +7472,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
+@@ -7492,6 +7492,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
  	return skb;
  }
  
@@ -517,7 +517,7 @@ v13:
  static struct sk_buff *
  ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
  			     enum wmi_sta_ps_mode psmode)
-@@ -9160,6 +9203,9 @@ static const struct wmi_ops wmi_ops = {
+@@ -9180,6 +9223,9 @@ static const struct wmi_ops wmi_ops = {
  	.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
  	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
  	.gen_echo = ath10k_wmi_op_gen_echo,
@@ -527,7 +527,7 @@ v13:
  	/* .gen_bcn_tmpl not implemented */
  	/* .gen_prb_tmpl not implemented */
  	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9230,6 +9276,8 @@ static const struct wmi_ops wmi_10_1_ops
+@@ -9250,6 +9296,8 @@ static const struct wmi_ops wmi_10_1_ops
  	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
  	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
  	.gen_echo = ath10k_wmi_op_gen_echo,
@@ -536,7 +536,7 @@ v13:
  	/* .gen_bcn_tmpl not implemented */
  	/* .gen_prb_tmpl not implemented */
  	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9302,6 +9350,8 @@ static const struct wmi_ops wmi_10_2_ops
+@@ -9322,6 +9370,8 @@ static const struct wmi_ops wmi_10_2_ops
  	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
  	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
  	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
@@ -545,7 +545,7 @@ v13:
  	/* .gen_pdev_enable_adaptive_cca not implemented */
  };
  
-@@ -9373,6 +9423,8 @@ static const struct wmi_ops wmi_10_2_4_o
+@@ -9393,6 +9443,8 @@ static const struct wmi_ops wmi_10_2_4_o
  		ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
  	.get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
  	.gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing,
@@ -554,7 +554,7 @@ v13:
  	/* .gen_bcn_tmpl not implemented */
  	/* .gen_prb_tmpl not implemented */
  	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9454,6 +9506,8 @@ static const struct wmi_ops wmi_10_4_ops
+@@ -9474,6 +9526,8 @@ static const struct wmi_ops wmi_10_4_ops
  	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
  	.gen_echo = ath10k_wmi_op_gen_echo,
  	.gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,

package/kernel/mac80211/patches/ath10k/975-ath10k-use-tpt-trigger-by-default.patch

@@ -16,7 +16,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
 
 --- a/drivers/net/wireless/ath/ath10k/core.h
 +++ b/drivers/net/wireless/ath/ath10k/core.h
-@@ -1309,6 +1309,10 @@ struct ath10k {
+@@ -1312,6 +1312,10 @@ struct ath10k {
  	s32 tx_power_2g_limit;
  	s32 tx_power_5g_limit;
  
@@ -42,7 +42,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	if (ret)
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -10284,7 +10284,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10293,7 +10293,7 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  
  #ifdef CPTCFG_MAC80211_LEDS

package/kernel/mac80211/patches/ath10k/984-ath10k-Try-to-get-mac-address-from-dts.patch

@@ -26,7 +26,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
  #include <linux/property.h>
  #include <linux/dmi.h>
  #include <linux/ctype.h>
-@@ -3407,6 +3408,8 @@ static int ath10k_core_probe_fw(struct a
+@@ -3401,6 +3402,8 @@ static int ath10k_core_probe_fw(struct a
  
  	device_get_mac_address(ar->dev, ar->mac_addr);
  

package/kernel/mac80211/patches/ath10k/988-ath10k-always-use-mac80211-loss-detection.patch

@@ -18,7 +18,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
 
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -10080,7 +10080,6 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10089,7 +10089,6 @@ int ath10k_mac_register(struct ath10k *a
  	ieee80211_hw_set(ar->hw, CHANCTX_STA_CSA);
  	ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
  	ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);

package/kernel/mac80211/patches/ath11k/0001-wifi-ath11k-stop-tx-queues-immediately-upon-firmware.patch

@@ -35,7 +35,7 @@ Link: https://lore.kernel.org/r/20220923170235.18873-1-quic_adisi@quicinc.com
 
 --- a/drivers/net/wireless/ath/ath11k/core.c
 +++ b/drivers/net/wireless/ath/ath11k/core.c
-@@ -1641,7 +1641,7 @@ static void ath11k_update_11d(struct wor
+@@ -1668,7 +1668,7 @@ static void ath11k_update_11d(struct wor
  	}
  }
  
@@ -44,7 +44,7 @@ Link: https://lore.kernel.org/r/20220923170235.18873-1-quic_adisi@quicinc.com
  {
  	struct ath11k *ar;
  	struct ath11k_pdev *pdev;
-@@ -1730,9 +1730,6 @@ static void ath11k_core_restart(struct w
+@@ -1757,9 +1757,6 @@ static void ath11k_core_restart(struct w
  	struct ath11k_base *ab = container_of(work, struct ath11k_base, restart_work);
  	int ret;
  
@@ -66,7 +66,7 @@ Link: https://lore.kernel.org/r/20220923170235.18873-1-quic_adisi@quicinc.com
  						    const char *filename);
 --- a/drivers/net/wireless/ath/ath11k/qmi.c
 +++ b/drivers/net/wireless/ath/ath11k/qmi.c
-@@ -3164,6 +3164,9 @@ static void ath11k_qmi_driver_event_work
+@@ -3169,6 +3169,9 @@ static void ath11k_qmi_driver_event_work
  		case ATH11K_QMI_EVENT_SERVER_EXIT:
  			set_bit(ATH11K_FLAG_CRASH_FLUSH, &ab->dev_flags);
  			set_bit(ATH11K_FLAG_RECOVERY, &ab->dev_flags);

package/kernel/mac80211/patches/ath11k/0007-wifi-ath11k-suppress-add-interface-error.patch

@@ -20,7 +20,7 @@ Link: https://lore.kernel.org/r/20221006005842.8599-1-quic_periyasa@quicinc.com
 
 --- a/drivers/net/wireless/ath/ath11k/mac.c
 +++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -6421,18 +6421,16 @@ static int ath11k_mac_op_add_interface(s
+@@ -6418,18 +6418,16 @@ static int ath11k_mac_op_add_interface(s
  
  	ath11k_dp_vdev_tx_attach(ar, arvif);
  
@@ -42,7 +42,7 @@ Link: https://lore.kernel.org/r/20221006005842.8599-1-quic_periyasa@quicinc.com
  	mutex_unlock(&ar->conf_mutex);
  
  	return 0;
-@@ -6457,7 +6455,6 @@ err_vdev_del:
+@@ -6454,7 +6452,6 @@ err_vdev_del:
  	spin_unlock_bh(&ar->data_lock);
  
  err:

package/kernel/mac80211/patches/ath11k/0008-wifi-ath11k-add-support-to-configure-channel-dwell-t.patch

@@ -43,7 +43,7 @@ Link: https://lore.kernel.org/r/20221007051130.6067-1-quic_mpubbise@quicinc.com
  
  static const u32 ath11k_smps_map[] = {
  	[WLAN_HT_CAP_SM_PS_STATIC] = WMI_PEER_SMPS_STATIC,
-@@ -3612,6 +3615,7 @@ static int ath11k_mac_op_hw_scan(struct
+@@ -3609,6 +3612,7 @@ static int ath11k_mac_op_hw_scan(struct
  	struct scan_req_params arg;
  	int ret = 0;
  	int i;
@@ -51,7 +51,7 @@ Link: https://lore.kernel.org/r/20221007051130.6067-1-quic_mpubbise@quicinc.com
  
  	mutex_lock(&ar->conf_mutex);
  
-@@ -3681,6 +3685,26 @@ static int ath11k_mac_op_hw_scan(struct
+@@ -3678,6 +3682,26 @@ static int ath11k_mac_op_hw_scan(struct
  		ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask);
  	}
  
@@ -78,7 +78,7 @@ Link: https://lore.kernel.org/r/20221007051130.6067-1-quic_mpubbise@quicinc.com
  	ret = ath11k_start_scan(ar, &arg);
  	if (ret) {
  		ath11k_warn(ar->ab, "failed to start hw scan: %d\n", ret);
-@@ -3689,10 +3713,8 @@ static int ath11k_mac_op_hw_scan(struct
+@@ -3686,10 +3710,8 @@ static int ath11k_mac_op_hw_scan(struct
  		spin_unlock_bh(&ar->data_lock);
  	}
  
@@ -90,7 +90,7 @@ Link: https://lore.kernel.org/r/20221007051130.6067-1-quic_mpubbise@quicinc.com
  
  exit:
  	kfree(arg.chan_list);
-@@ -9060,6 +9082,9 @@ static int __ath11k_mac_register(struct
+@@ -9065,6 +9087,9 @@ static int __ath11k_mac_register(struct
  				      NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP);
  	}
  

package/kernel/mac80211/patches/ath11k/0010-wifi-ath11k-Fix-firmware-crash-on-vdev-delete-race-c.patch

@@ -21,7 +21,7 @@ Link: https://lore.kernel.org/r/20221011095346.3901-1-quic_ssreeela@quicinc.com
 
 --- a/drivers/net/wireless/ath/ath11k/mac.c
 +++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -6233,6 +6233,40 @@ void ath11k_mac_11d_scan_stop_all(struct
+@@ -6230,6 +6230,40 @@ void ath11k_mac_11d_scan_stop_all(struct
  	}
  }
  
@@ -62,7 +62,7 @@ Link: https://lore.kernel.org/r/20221011095346.3901-1-quic_ssreeela@quicinc.com
  static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
  				       struct ieee80211_vif *vif)
  {
-@@ -6468,10 +6502,7 @@ err_peer_del:
+@@ -6465,10 +6499,7 @@ err_peer_del:
  	}
  
  err_vdev_del:
@@ -74,7 +74,7 @@ Link: https://lore.kernel.org/r/20221011095346.3901-1-quic_ssreeela@quicinc.com
  	spin_lock_bh(&ar->data_lock);
  	list_del(&arvif->list);
  	spin_unlock_bh(&ar->data_lock);
-@@ -6499,7 +6530,6 @@ static void ath11k_mac_op_remove_interfa
+@@ -6496,7 +6527,6 @@ static void ath11k_mac_op_remove_interfa
  	struct ath11k *ar = hw->priv;
  	struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
  	struct ath11k_base *ab = ar->ab;
@@ -82,7 +82,7 @@ Link: https://lore.kernel.org/r/20221011095346.3901-1-quic_ssreeela@quicinc.com
  	int ret;
  	int i;
  
-@@ -6520,29 +6550,13 @@ static void ath11k_mac_op_remove_interfa
+@@ -6517,29 +6547,13 @@ static void ath11k_mac_op_remove_interfa
  				    arvif->vdev_id, ret);
  	}
  

package/kernel/mac80211/patches/ath11k/0011-wifi-ath11k-fix-monitor-vdev-creation-with-firmware-.patch

@@ -27,7 +27,7 @@ Link: https://lore.kernel.org/r/20221014155054.11471-1-quic_nmaran@quicinc.com
 
 --- a/drivers/net/wireless/ath/ath11k/core.c
 +++ b/drivers/net/wireless/ath/ath11k/core.c
-@@ -1677,6 +1677,10 @@ void ath11k_core_pre_reconfigure_recover
+@@ -1704,6 +1704,10 @@ void ath11k_core_pre_reconfigure_recover
  			     ath11k_mac_tx_mgmt_pending_free, ar);
  		idr_destroy(&ar->txmgmt_idr);
  		wake_up(&ar->txmgmt_empty_waitq);

package/kernel/mac80211/patches/ath11k/0013-wifi-ath11k-synchronize-ath11k_mac_he_gi_to_nl80211_.patch

@@ -1,42 +0,0 @@
-From dd1c2322694522f674c874f5fa02ac5ae39135dd Mon Sep 17 00:00:00 2001
-From: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
-Date: Mon, 31 Oct 2022 12:43:41 +0100
-Subject: [PATCH] wifi: ath11k: synchronize
- ath11k_mac_he_gi_to_nl80211_he_gi()'s return type
-
-ath11k_mac_he_gi_to_nl80211_he_gi() generates a valid warning with gcc-13:
-  drivers/net/wireless/ath/ath11k/mac.c:321:20: error: conflicting types for 'ath11k_mac_he_gi_to_nl80211_he_gi' due to enum/integer mismatch; have 'enum nl80211_he_gi(u8)'
-  drivers/net/wireless/ath/ath11k/mac.h:166:5: note: previous declaration of 'ath11k_mac_he_gi_to_nl80211_he_gi' with type 'u32(u8)'
-
-I.e. the type of the return value ath11k_mac_he_gi_to_nl80211_he_gi() in
-the declaration is u32, while the definition spells enum nl80211_he_gi.
-Synchronize them to the latter.
-
-Cc: Martin Liska <mliska@suse.cz>
-Cc: Kalle Valo <kvalo@kernel.org>
-Cc: "David S. Miller" <davem@davemloft.net>
-Cc: Eric Dumazet <edumazet@google.com>
-Cc: Jakub Kicinski <kuba@kernel.org>
-Cc: Paolo Abeni <pabeni@redhat.com>
-Cc: ath11k@lists.infradead.org
-Cc: linux-wireless@vger.kernel.org
-Cc: netdev@vger.kernel.org
-Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
-Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
-Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
-Link: https://lore.kernel.org/r/20221031114341.10377-1-jirislaby@kernel.org
----
- drivers/net/wireless/ath/ath11k/mac.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ath/ath11k/mac.h
-+++ b/drivers/net/wireless/ath/ath11k/mac.h
-@@ -163,7 +163,7 @@ void ath11k_mac_drain_tx(struct ath11k *
- void ath11k_mac_peer_cleanup_all(struct ath11k *ar);
- int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx);
- u8 ath11k_mac_bw_to_mac80211_bw(u8 bw);
--u32 ath11k_mac_he_gi_to_nl80211_he_gi(u8 sgi);
-+enum nl80211_he_gi ath11k_mac_he_gi_to_nl80211_he_gi(u8 sgi);
- enum nl80211_he_ru_alloc ath11k_mac_phy_he_ru_to_nl80211_he_ru_alloc(u16 ru_phy);
- enum nl80211_he_ru_alloc ath11k_mac_he_ru_tones_to_nl80211_he_ru_alloc(u16 ru_tones);
- enum ath11k_supported_bw ath11k_mac_mac80211_bw_to_ath11k_bw(enum rate_info_bw bw);

package/kernel/mac80211/patches/ath11k/0017-wifi-ath11k-Trigger-sta-disconnect-on-hardware-resta.patch

@@ -96,7 +96,7 @@ Link: https://lore.kernel.org/r/20221104085403.11025-1-quic_youghand@quicinc.com
  struct ath11k_hw_ops {
 --- a/drivers/net/wireless/ath/ath11k/mac.c
 +++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -8010,6 +8010,7 @@ ath11k_mac_op_reconfig_complete(struct i
+@@ -8007,6 +8007,7 @@ ath11k_mac_op_reconfig_complete(struct i
  	struct ath11k *ar = hw->priv;
  	struct ath11k_base *ab = ar->ab;
  	int recovery_count;
@@ -104,7 +104,7 @@ Link: https://lore.kernel.org/r/20221104085403.11025-1-quic_youghand@quicinc.com
  
  	if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
  		return;
-@@ -8045,6 +8046,12 @@ ath11k_mac_op_reconfig_complete(struct i
+@@ -8042,6 +8043,12 @@ ath11k_mac_op_reconfig_complete(struct i
  				ath11k_dbg(ab, ATH11K_DBG_BOOT, "reset success\n");
  			}
  		}

package/kernel/mac80211/patches/ath11k/0021-wifi-ath11k-remap-ce-register-space-for-IPQ5018.patch

@@ -81,7 +81,7 @@ Link: https://lore.kernel.org/r/20221122132152.17771-5-quic_kathirve@quicinc.com
  	}
  }
  
-@@ -1142,10 +1154,26 @@ static int ath11k_ahb_probe(struct platf
+@@ -1148,10 +1160,26 @@ static int ath11k_ahb_probe(struct platf
  		goto err_core_free;
  	}
  
@@ -108,7 +108,7 @@ Link: https://lore.kernel.org/r/20221122132152.17771-5-quic_kathirve@quicinc.com
  	ret = ath11k_ahb_setup_resources(ab);
  	if (ret)
  		goto err_core_free;
-@@ -1236,6 +1264,10 @@ static void ath11k_ahb_free_resources(st
+@@ -1242,6 +1270,10 @@ static void ath11k_ahb_free_resources(st
  	ath11k_ahb_release_smp2p_handle(ab);
  	ath11k_ahb_fw_resource_deinit(ab);
  	ath11k_ce_free_pipes(ab);
@@ -340,7 +340,7 @@ Link: https://lore.kernel.org/r/20221122132152.17771-5-quic_kathirve@quicinc.com
  extern const struct ath11k_hw_hal_params ath11k_hw_hal_params_wcn6750;
 --- a/drivers/net/wireless/ath/ath11k/pci.c
 +++ b/drivers/net/wireless/ath/ath11k/pci.c
-@@ -543,6 +543,8 @@ static int ath11k_pci_claim(struct ath11
+@@ -547,6 +547,8 @@ static int ath11k_pci_claim(struct ath11
  		goto clear_master;
  	}
  

package/kernel/mac80211/patches/ath11k/0026-wifi-ath11k-Fix-scan-request-param-frame-size-warnin.patch

@@ -23,7 +23,7 @@ Link: https://lore.kernel.org/r/20221205192125.13533-1-quic_kathirve@quicinc.com
 
 --- a/drivers/net/wireless/ath/ath11k/mac.c
 +++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -3612,7 +3612,7 @@ static int ath11k_mac_op_hw_scan(struct
+@@ -3609,7 +3609,7 @@ static int ath11k_mac_op_hw_scan(struct
  	struct ath11k *ar = hw->priv;
  	struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
  	struct cfg80211_scan_request *req = &hw_req->req;
@@ -32,7 +32,7 @@ Link: https://lore.kernel.org/r/20221205192125.13533-1-quic_kathirve@quicinc.com
  	int ret = 0;
  	int i;
  	u32 scan_timeout;
-@@ -3640,72 +3640,78 @@ static int ath11k_mac_op_hw_scan(struct
+@@ -3637,72 +3637,78 @@ static int ath11k_mac_op_hw_scan(struct
  	if (ret)
  		goto exit;
  
@@ -143,7 +143,7 @@ Link: https://lore.kernel.org/r/20221205192125.13533-1-quic_kathirve@quicinc.com
  	if (ret) {
  		ath11k_warn(ar->ab, "failed to start hw scan: %d\n", ret);
  		spin_lock_bh(&ar->data_lock);
-@@ -3717,10 +3723,11 @@ static int ath11k_mac_op_hw_scan(struct
+@@ -3714,10 +3720,11 @@ static int ath11k_mac_op_hw_scan(struct
  				     msecs_to_jiffies(scan_timeout));
  
  exit:

package/kernel/mac80211/patches/ath11k/0029-wifi-ath11k-Add-support-to-configure-FTM-responder-r.patch

@@ -116,7 +116,7 @@ Link: https://lore.kernel.org/r/20221220044435.10506-1-quic_rajkbhag@quicinc.com
  struct ath11k_hw_ops {
 --- a/drivers/net/wireless/ath/ath11k/mac.c
 +++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -3110,7 +3110,7 @@ static void ath11k_mac_op_bss_info_chang
+@@ -3107,7 +3107,7 @@ static void ath11k_mac_op_bss_info_chang
  	u16 bitrate;
  	int ret = 0;
  	u8 rateidx;
@@ -125,7 +125,7 @@ Link: https://lore.kernel.org/r/20221220044435.10506-1-quic_rajkbhag@quicinc.com
  	u32 ipv4_cnt;
  
  	mutex_lock(&ar->conf_mutex);
-@@ -3412,6 +3412,20 @@ static void ath11k_mac_op_bss_info_chang
+@@ -3409,6 +3409,20 @@ static void ath11k_mac_op_bss_info_chang
  		}
  	}
  
@@ -146,7 +146,7 @@ Link: https://lore.kernel.org/r/20221220044435.10506-1-quic_rajkbhag@quicinc.com
  	if (changed & BSS_CHANGED_FILS_DISCOVERY ||
  	    changed & BSS_CHANGED_UNSOL_BCAST_PROBE_RESP)
  		ath11k_mac_fils_discovery(arvif, info);
-@@ -9113,6 +9127,10 @@ static int __ath11k_mac_register(struct
+@@ -9118,6 +9132,10 @@ static int __ath11k_mac_register(struct
  	wiphy_ext_feature_set(ar->hw->wiphy,
  			      NL80211_EXT_FEATURE_SET_SCAN_DWELL);
  

package/kernel/mac80211/patches/ath11k/0031-wifi-ath11k-fix-ce-memory-mapping-for-ahb-devices.patch

@@ -82,7 +82,7 @@ Link: https://lore.kernel.org/r/20230113063209.7256-1-quic_rajkbhag@quicinc.com
 
 --- a/drivers/net/wireless/ath/ath11k/ahb.c
 +++ b/drivers/net/wireless/ath/ath11k/ahb.c
-@@ -1157,12 +1157,16 @@ static int ath11k_ahb_probe(struct platf
+@@ -1163,12 +1163,16 @@ static int ath11k_ahb_probe(struct platf
  		goto err_core_free;
  	}
  
@@ -101,7 +101,7 @@ Link: https://lore.kernel.org/r/20230113063209.7256-1-quic_rajkbhag@quicinc.com
  	if (ab->hw_params.ce_remap) {
  		const struct ce_remap *ce_remap = ab->hw_params.ce_remap;
  		/* ce register space is moved out of wcss unlike ipq8074 or ipq6018
-@@ -1177,10 +1181,6 @@ static int ath11k_ahb_probe(struct platf
+@@ -1183,10 +1187,6 @@ static int ath11k_ahb_probe(struct platf
  		}
  	}
  

package/kernel/mac80211/patches/ath11k/0034-wifi-ath11k-fix-return-value-check-in-ath11k_ahb_pro.patch

@@ -16,7 +16,7 @@ Link: https://lore.kernel.org/r/20230217030031.4021289-1-yangyingliang@huawei.co
 
 --- a/drivers/net/wireless/ath/ath11k/ahb.c
 +++ b/drivers/net/wireless/ath/ath11k/ahb.c
-@@ -1174,7 +1174,7 @@ static int ath11k_ahb_probe(struct platf
+@@ -1180,7 +1180,7 @@ static int ath11k_ahb_probe(struct platf
  		 * to a new space for accessing them.
  		 */
  		ab->mem_ce = ioremap(ce_remap->base, ce_remap->size);

package/kernel/mac80211/patches/ath11k/0035-wifi-ath11k-Use-platform_get_irq-to-get-the-interrup.patch

@@ -1,50 +0,0 @@
-From f117276638b7600b981b3fe28550823cfbe1ef23 Mon Sep 17 00:00:00 2001
-From: Douglas Anderson <dianders@chromium.org>
-Date: Wed, 1 Feb 2023 08:54:42 -0800
-Subject: [PATCH] wifi: ath11k: Use platform_get_irq() to get the interrupt
-
-As of commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ
-resource from DT core"), we need to use platform_get_irq() instead of
-platform_get_resource() to get our IRQs because
-platform_get_resource() simply won't get them anymore.
-
-This was already fixed in several other Atheros WiFi drivers,
-apparently in response to Zeal Robot reports. An example of another
-fix is commit 9503a1fc123d ("ath9k: Use platform_get_irq() to get the
-interrupt"). ath11k seems to have been missed in this effort, though.
-
-Without this change, WiFi wasn't coming up on my Qualcomm sc7280-based
-hardware. Specifically, "platform_get_resource(pdev, IORESOURCE_IRQ,
-i)" was failing even for i=0.
-
-Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
-
-Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core")
-Fixes: 00402f49d26f ("ath11k: Add support for WCN6750 device")
-Signed-off-by: Douglas Anderson <dianders@chromium.org>
-Tested-by: Jun Yu <junyuu@chromium.org>
-Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
-Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
-Link: https://lore.kernel.org/r/20230201084131.v2.1.I69cf3d56c97098287fe3a70084ee515098390b70@changeid
----
- drivers/net/wireless/ath/ath11k/ahb.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireless/ath/ath11k/ahb.c
-+++ b/drivers/net/wireless/ath/ath11k/ahb.c
-@@ -874,11 +874,11 @@ static int ath11k_ahb_setup_msi_resource
- 	ab->pci.msi.ep_base_data = int_prop + 32;
- 
- 	for (i = 0; i < ab->pci.msi.config->total_vectors; i++) {
--		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
--		if (!res)
--			return -ENODEV;
-+		ret = platform_get_irq(pdev, i);
-+		if (ret < 0)
-+			return ret;
- 
--		ab->pci.msi.irqs[i] = res->start;
-+		ab->pci.msi.irqs[i] = ret;
- 	}
- 
- 	set_bit(ATH11K_FLAG_MULTI_MSI_VECTORS, &ab->dev_flags);

package/kernel/mac80211/patches/ath11k/0036-wifi-ath11k-fix-SAC-bug-on-peer-addition-with-sta-ba.patch

@@ -1,53 +0,0 @@
-From 60b7d62ba8cdbd073997bff0f1cdae8d844002c0 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 9 Feb 2023 23:26:22 +0100
-Subject: [PATCH] wifi: ath11k: fix SAC bug on peer addition with sta band
- migration
-
-Fix sleep in atomic context warning detected by Smatch static checker
-analyzer.
-
-Following the locking pattern for peer_rhash_add lock tbl_mtx_lock mutex
-always even if sta is not transitioning to another band.
-This is peer_add function and a more secure locking should not cause
-performance regression.
-
-Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
-
-Fixes: d673cb6fe6c0 ("wifi: ath11k: fix peer addition/deletion error on sta band migration")
-Reported-by: Dan Carpenter <error27@gmail.com>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
-Link: https://lore.kernel.org/r/20230209222622.1751-1-ansuelsmth@gmail.com
----
- drivers/net/wireless/ath/ath11k/peer.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/net/wireless/ath/ath11k/peer.c
-+++ b/drivers/net/wireless/ath/ath11k/peer.c
-@@ -382,22 +382,23 @@ int ath11k_peer_create(struct ath11k *ar
- 		return -ENOBUFS;
- 	}
- 
-+	mutex_lock(&ar->ab->tbl_mtx_lock);
- 	spin_lock_bh(&ar->ab->base_lock);
- 	peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
- 	if (peer) {
- 		if (peer->vdev_id == param->vdev_id) {
- 			spin_unlock_bh(&ar->ab->base_lock);
-+			mutex_unlock(&ar->ab->tbl_mtx_lock);
- 			return -EINVAL;
- 		}
- 
- 		/* Assume sta is transitioning to another band.
- 		 * Remove here the peer from rhash.
- 		 */
--		mutex_lock(&ar->ab->tbl_mtx_lock);
- 		ath11k_peer_rhash_delete(ar->ab, peer);
--		mutex_unlock(&ar->ab->tbl_mtx_lock);
- 	}
- 	spin_unlock_bh(&ar->ab->base_lock);
-+	mutex_unlock(&ar->ab->tbl_mtx_lock);
- 
- 	ret = ath11k_wmi_send_peer_create_cmd(ar, param);
- 	if (ret) {

package/kernel/mac80211/patches/ath11k/0037-wifi-ath11k-allow-system-suspend-to-survive-ath11k.patch

@@ -32,7 +32,7 @@ Link: https://lore.kernel.org/r/20230201183201.14431-1-len.brown@intel.com
 
 --- a/drivers/net/wireless/ath/ath11k/pci.c
 +++ b/drivers/net/wireless/ath/ath11k/pci.c
-@@ -998,7 +998,7 @@ static __maybe_unused int ath11k_pci_pm_
+@@ -1004,7 +1004,7 @@ static __maybe_unused int ath11k_pci_pm_
  	if (ret)
  		ath11k_warn(ab, "failed to resume core: %d\n", ret);
  

package/kernel/mac80211/patches/ath11k/0039-wifi-ath11k-push-MU-MIMO-params-from-hostapd-to-hard.patch

@@ -21,7 +21,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@q
 
 --- a/drivers/net/wireless/ath/ath11k/mac.c
 +++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -2699,6 +2699,117 @@ static int ath11k_setup_peer_smps(struct
+@@ -2696,6 +2696,117 @@ static int ath11k_setup_peer_smps(struct
  					 ath11k_smps_map[smps]);
  }
  
@@ -139,7 +139,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@q
  static void ath11k_bss_assoc(struct ieee80211_hw *hw,
  			     struct ieee80211_vif *vif,
  			     struct ieee80211_bss_conf *bss_conf)
-@@ -2709,6 +2820,7 @@ static void ath11k_bss_assoc(struct ieee
+@@ -2706,6 +2817,7 @@ static void ath11k_bss_assoc(struct ieee
  	struct ieee80211_sta *ap_sta;
  	struct ath11k_peer *peer;
  	bool is_auth = false;
@@ -147,7 +147,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@q
  	int ret;
  
  	lockdep_assert_held(&ar->conf_mutex);
-@@ -2726,6 +2838,9 @@ static void ath11k_bss_assoc(struct ieee
+@@ -2723,6 +2835,9 @@ static void ath11k_bss_assoc(struct ieee
  		return;
  	}
  
@@ -157,7 +157,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@q
  	ath11k_peer_assoc_prepare(ar, vif, ap_sta, &peer_arg, false);
  
  	rcu_read_unlock();
-@@ -2753,6 +2868,12 @@ static void ath11k_bss_assoc(struct ieee
+@@ -2750,6 +2865,12 @@ static void ath11k_bss_assoc(struct ieee
  		return;
  	}
  
@@ -170,7 +170,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@q
  	WARN_ON(arvif->is_up);
  
  	arvif->aid = vif->cfg.aid;
-@@ -3202,6 +3323,8 @@ static void ath11k_mac_op_bss_info_chang
+@@ -3199,6 +3320,8 @@ static void ath11k_mac_op_bss_info_chang
  		ether_addr_copy(arvif->bssid, info->bssid);
  
  	if (changed & BSS_CHANGED_BEACON_ENABLED) {
@@ -179,7 +179,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@q
  		ath11k_control_beaconing(arvif, info);
  
  		if (arvif->is_up && vif->bss_conf.he_support &&
-@@ -5392,6 +5515,10 @@ static int ath11k_mac_copy_he_cap(struct
+@@ -5389,6 +5512,10 @@ static int ath11k_mac_copy_he_cap(struct
  
  		he_cap_elem->mac_cap_info[1] &=
  			IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK;
@@ -190,7 +190,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@q
  
  		he_cap_elem->phy_cap_info[5] &=
  			~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK;
-@@ -6026,69 +6153,6 @@ ath11k_mac_setup_vdev_create_params(stru
+@@ -6023,69 +6150,6 @@ ath11k_mac_setup_vdev_create_params(stru
  	}
  }
  
@@ -260,7 +260,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@q
  static void ath11k_mac_op_update_vif_offload(struct ieee80211_hw *hw,
  					     struct ieee80211_vif *vif)
  {
-@@ -6757,7 +6821,6 @@ ath11k_mac_vdev_start_restart(struct ath
+@@ -6754,7 +6818,6 @@ ath11k_mac_vdev_start_restart(struct ath
  	struct ath11k_base *ab = ar->ab;
  	struct wmi_vdev_start_req_arg arg = {};
  	const struct cfg80211_chan_def *chandef = &ctx->def;
@@ -268,7 +268,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@q
  	int ret = 0;
  
  	lockdep_assert_held(&ar->conf_mutex);
-@@ -6798,15 +6861,6 @@ ath11k_mac_vdev_start_restart(struct ath
+@@ -6795,15 +6858,6 @@ ath11k_mac_vdev_start_restart(struct ath
  		spin_lock_bh(&ab->base_lock);
  		arg.regdomain = ar->ab->dfs_region;
  		spin_unlock_bh(&ab->base_lock);

package/kernel/mac80211/patches/ath11k/0040-wifi-ath11k-move-HE-MCS-mapper-to-a-separate-functio.patch

@@ -17,7 +17,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-4-git-send-email-quic_msinada@q
 
 --- a/drivers/net/wireless/ath/ath11k/mac.c
 +++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -5483,6 +5483,27 @@ static __le16 ath11k_mac_setup_he_6ghz_c
+@@ -5480,6 +5480,27 @@ static __le16 ath11k_mac_setup_he_6ghz_c
  	return cpu_to_le16(bcap->he_6ghz_capa);
  }
  
@@ -45,7 +45,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-4-git-send-email-quic_msinada@q
  static int ath11k_mac_copy_he_cap(struct ath11k *ar,
  				  struct ath11k_pdev_cap *cap,
  				  struct ieee80211_sband_iftype_data *data,
-@@ -5544,18 +5565,7 @@ static int ath11k_mac_copy_he_cap(struct
+@@ -5541,18 +5562,7 @@ static int ath11k_mac_copy_he_cap(struct
  			break;
  		}
  

package/kernel/mac80211/patches/ath11k/0041-wifi-ath11k-generate-rx-and-tx-mcs-maps-for-supporte.patch

@@ -18,7 +18,7 @@ Link: https://lore.kernel.org/r/1666128501-12364-5-git-send-email-quic_msinada@q
 
 --- a/drivers/net/wireless/ath/ath11k/mac.c
 +++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -5488,20 +5488,36 @@ static void ath11k_mac_set_hemcsmap(stru
+@@ -5485,20 +5485,36 @@ static void ath11k_mac_set_hemcsmap(stru
  				    struct ieee80211_sta_he_cap *he_cap,
  				    int band)
  {

package/kernel/mac80211/patches/ath11k/0042-wifi-ath11k-Add-tx-ack-signal-support-for-management.patch

@@ -36,7 +36,7 @@ Link: https://lore.kernel.org/r/20221219053844.4084486-1-quic_mkenna@quicinc.com
  static int ath11k_hw_mac_id_to_pdev_id_ipq8074(struct ath11k_hw_params *hw,
 --- a/drivers/net/wireless/ath/ath11k/mac.c
 +++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -9174,6 +9174,11 @@ static int __ath11k_mac_register(struct
+@@ -9179,6 +9179,11 @@ static int __ath11k_mac_register(struct
  		goto err_free_if_combs;
  	}
  

package/kernel/mac80211/patches/ath11k/0044-wifi-ath11k-add-support-to-parse-new-WMI-event-for-6.patch

@@ -568,7 +568,7 @@ Link: https://lore.kernel.org/r/20230110121024.14051-3-quic_adisi@quicinc.com
  		kfree(reg_info);
  	}
  	return ret;
-@@ -8054,7 +8437,10 @@ static void ath11k_wmi_tlv_op_rx(struct
+@@ -8070,7 +8453,10 @@ static void ath11k_wmi_tlv_op_rx(struct
  		ath11k_service_ready_ext2_event(ab, skb);
  		break;
  	case WMI_REG_CHAN_LIST_CC_EVENTID:

package/kernel/mac80211/patches/ath11k/0047-wifi-ath11k-fix-deinitialization-of-firmware-resourc.patch

@@ -1,79 +0,0 @@
-From 5a78ac33e3cb8822da64dd1af196e83664b332b0 Mon Sep 17 00:00:00 2001
-From: Aditya Kumar Singh <quic_adisi@quicinc.com>
-Date: Thu, 9 Mar 2023 15:23:08 +0530
-Subject: [PATCH] wifi: ath11k: fix deinitialization of firmware resources
-
-Currently, in ath11k_ahb_fw_resources_init(), iommu domain
-mapping is done only for the chipsets having fixed firmware
-memory. Also, for such chipsets, mapping is done only if it
-does not have TrustZone support.
-
-During deinitialization, only if TrustZone support is not there,
-iommu is unmapped back. However, for non fixed firmware memory
-chipsets, TrustZone support is not there and this makes the
-condition check to true and it tries to unmap the memory which
-was not mapped during initialization.
-
-This leads to the following trace -
-
-[   83.198790] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
-[   83.259537] Modules linked in: ath11k_ahb ath11k qmi_helpers
-.. snip ..
-[   83.280286] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
-[   83.287228] pc : __iommu_unmap+0x30/0x140
-[   83.293907] lr : iommu_unmap+0x5c/0xa4
-[   83.298072] sp : ffff80000b3abad0
-.. snip ..
-[   83.369175] Call trace:
-[   83.376282]  __iommu_unmap+0x30/0x140
-[   83.378541]  iommu_unmap+0x5c/0xa4
-[   83.382360]  ath11k_ahb_fw_resource_deinit.part.12+0x2c/0xac [ath11k_ahb]
-[   83.385666]  ath11k_ahb_free_resources+0x140/0x17c [ath11k_ahb]
-[   83.392521]  ath11k_ahb_shutdown+0x34/0x40 [ath11k_ahb]
-[   83.398248]  platform_shutdown+0x20/0x2c
-[   83.403455]  device_shutdown+0x16c/0x1c4
-[   83.407621]  kernel_restart_prepare+0x34/0x3c
-[   83.411529]  kernel_restart+0x14/0x74
-[   83.415781]  __do_sys_reboot+0x1c4/0x22c
-[   83.419427]  __arm64_sys_reboot+0x1c/0x24
-[   83.423420]  invoke_syscall+0x44/0xfc
-[   83.427326]  el0_svc_common.constprop.3+0xac/0xe8
-[   83.430974]  do_el0_svc+0xa0/0xa8
-[   83.435659]  el0_svc+0x1c/0x44
-[   83.438957]  el0t_64_sync_handler+0x60/0x144
-[   83.441910]  el0t_64_sync+0x15c/0x160
-[   83.446343] Code: aa0103f4 f9400001 f90027a1 d2800001 (f94006a0)
-[   83.449903] ---[ end trace 0000000000000000 ]---
-
-This can be reproduced by probing an AHB chipset which is not
-having a fixed memory region. During reboot (or rmmod) trace
-can be seen.
-
-Fix this issue by adding a condition check on firmware fixed memory
-hw_param as done in the counter initialization function.
-
-Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
-
-Fixes: f9eec4947add ("ath11k: Add support for targets without trustzone")
-Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
-Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
-Link: https://lore.kernel.org/r/20230309095308.24937-1-quic_adisi@quicinc.com
----
- drivers/net/wireless/ath/ath11k/ahb.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/wireless/ath/ath11k/ahb.c
-+++ b/drivers/net/wireless/ath/ath11k/ahb.c
-@@ -1078,6 +1078,12 @@ static int ath11k_ahb_fw_resource_deinit
- 	struct iommu_domain *iommu;
- 	size_t unmapped_size;
- 
-+	/* Chipsets not requiring MSA would have not initialized
-+	 * MSA resources, return success in such cases.
-+	 */
-+	if (!ab->hw_params.fixed_fw_mem)
-+		return 0;
-+
- 	if (ab_ahb->fw.use_tz)
- 		return 0;
- 

package/kernel/mac80211/patches/ath11k/0048-wifi-ath11k-fix-BUFFER_DONE-read-on-monitor-ring-rx-.patch

@@ -65,7 +65,7 @@ Link: https://lore.kernel.org/r/20230309164434.32660-1-quic_hprem@quicinc.com
  	return 0;
  }
  
-@@ -3029,39 +3006,51 @@ static int ath11k_dp_rx_reap_mon_status_
+@@ -3038,39 +3015,51 @@ static int ath11k_dp_rx_reap_mon_status_
  
  			spin_lock_bh(&rx_ring->idr_lock);
  			skb = idr_find(&rx_ring->bufs_idr, buf_id);

package/kernel/mac80211/patches/ath11k/0049-wifi-ath11k-Optimize-6-GHz-scan-time.patch

@@ -47,7 +47,7 @@ Link: https://lore.kernel.org/r/20230323060913.10097-1-quic_mpubbise@quicinc.com
 
 --- a/drivers/net/wireless/ath/ath11k/mac.c
 +++ b/drivers/net/wireless/ath/ath11k/mac.c
-@@ -3819,8 +3819,29 @@ static int ath11k_mac_op_hw_scan(struct
+@@ -3816,8 +3816,29 @@ static int ath11k_mac_op_hw_scan(struct
  			goto exit;
  		}