rockchip: add ArmSom Sige3 support

Hardware
--------
RockChip RK3568 ARM64 (4 cores)
2/4/8GB LPDDR4x RAM
1000 Base-T
2500 Base-T
AP6275S Wi-Fi 6 / Bluetooth 5.3
2 LEDs (RED / GREEN)
8/16/32/64GB eMMC on-board
Micro-SD Slot
HDMI Port
USB 2.0 Port
USB 3.0 Port
USB Type-C 3.0 Port
M.2 M-Key
40-Pin Header
USB PD 2.0 9/12/15V Power

Installation
------------
Uncompress the ImmortalWrt sysupgrade and write it to a micro SD card or
internal eMMC using dd.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
This commit is contained in:
Tianling Shen
2024-08-30 11:15:54 +08:00
parent 3af9becde7
commit a609a18fb9
6 changed files with 860 additions and 10 deletions

View File

@@ -133,6 +133,9 @@ define Package/brcmfmac-nvram-43752-sdio/install
$(INSTALL_DATA) \
$(PKG_BUILD_DIR)/brcm/brcmfmac43752-sdio.txt \
$(1)/lib/firmware/brcm/
$(LN) \
brcmfmac43752-sdio.txt \
$(1)/lib/firmware/brcm/brcmfmac43752-sdio.armsom,sige3.txt
$(LN) \
brcmfmac43752-sdio.txt \
$(1)/lib/firmware/brcm/brcmfmac43752-sdio.firefly,rk3568-roc-pc.txt

View File

@@ -23,15 +23,16 @@ rockchip_setup_interfaces()
xunlong,orangepi-r1-plus-lts)
ucidef_set_interfaces_lan_wan 'eth1' 'eth0'
;;
friendlyarm,nanopc-t6)
ucidef_set_interfaces_lan_wan 'eth1' 'eth2'
;;
armsom,sige3|\
friendlyarm,nanopi-r5c|\
lunzn,fastrhino-r66s|\
radxa,e25|\
xunlong,orangepi-5-plus)
ucidef_set_interfaces_lan_wan 'eth0' 'eth1'
;;
friendlyarm,nanopc-t6)
ucidef_set_interfaces_lan_wan 'eth1' 'eth2'
;;
friendlyarm,nanopi-r5s)
ucidef_set_interfaces_lan_wan 'eth1 eth2' 'eth0'
;;
@@ -58,6 +59,7 @@ rockchip_setup_macs()
local label_mac=""
case "$board" in
armsom,sige3|\
armsom,sige7|\
ezpro,mrkaio-m68s|\
friendlyarm,nanopc-t6|\

View File

@@ -30,6 +30,7 @@ set_interface_core() {
case "$(board_name)" in
ariaboard,photonicat|\
armsom,sige3|\
armsom,sige7|\
ezpro,mrkaio-m68s|\
firefly,rk3568-roc-pc|\

View File

@@ -0,0 +1,828 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
* Copyright (c) 2024 Tianling Shen <cnsztl@gmail.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
model = "ArmSom Sige3";
compatible = "armsom,sige3", "rockchip,rk3568";
aliases {
ethernet0 = &gmac1;
mmc0 = &sdhci;
mmc1 = &sdmmc0;
mmc2 = &sdmmc1;
led-boot = &led_status_red;
led-failsafe = &led_status_red;
led-running = &led_status_red;
led-upgrade = &led_status_red;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_green_pin>, <&led_red_pin>;
led_status_green: led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
led_status_red: led-1 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
};
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
fan: pwm-fan {
compatible = "pwm-fan";
cooling-levels = <0 50 100 150 200 255>;
fan-supply = <&vcc5v0_sys>;
pwms = <&pwm3 0 50000 0>;
#cooling-cells = <2>;
};
rk809-sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
pinctrl-0 = <&hp_det_pin>;
simple-audio-card,name = "Analog RK817";
simple-audio-card,format = "i2s";
simple-audio-card,hp-det-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Headphone", "Headphones",
"Speaker", "Speaker";
simple-audio-card,routing =
"Headphones", "HPOL",
"Headphones", "HPOR",
"Speaker", "SPKO";
simple-audio-card,cpu {
sound-dai = <&i2s1_8ch>;
};
simple-audio-card,codec {
sound-dai = <&rk809>;
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&pmucru CLK_RTC_32K>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h &clk32k_out1>;
post-power-on-delay-ms = <100>;
power-off-delay-us = <5000000>;
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
};
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc3v3_sys: vcc3v3-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc12v_dcin>;
};
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie30_pwren_h>;
regulator-name = "vcc3v3_pcie30";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <5000>;
vin-supply = <&vcc3v3_sys>;
};
vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_usb_host: vcc5v0-usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_host_en>;
regulator-name = "vcc5v0_usb_host";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_usb_host2: vcc5v0-usb-host2-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_host2_en>;
regulator-name = "vcc5v0_usb_host2";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_otg_en>;
regulator-name = "vcc5v0_usb_otg";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
};
&combphy0 {
status = "okay";
};
&combphy1 {
status = "okay";
};
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&gmac1 {
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
assigned-clock-rates = <0>, <125000000>;
clock_in_out = "output";
phy-mode = "rgmii";
phy-handle = <&rgmii_phy1>;
pinctrl-names = "default";
pinctrl-0 = <&gmac1m1_miim
&gmac1m1_tx_bus2
&gmac1m1_rx_bus2
&gmac1m1_rgmii_clk
&gmac1m1_rgmii_bus>;
snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
tx_delay = <0x48>;
rx_delay = <0x2a>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-names = "mclk";
clocks = <&cru I2S1_MCLKOUT_TX>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
system-power-controller;
#sound-dai-cells = <0>;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
wakeup-source;
codec {
rockchip,mic-in-differential;
};
regulators {
vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8: DCDC_REG5 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_image: LDO_REG1 {
regulator-name = "vdda0v9_image";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <950000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
regulator-name = "vdda_0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-name = "vdda0v9_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-name = "vcc3v3_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_1v8: LDO_REG7 {
regulator-name = "vcca_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG8 {
regulator-name = "vcca1v8_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_image: LDO_REG9 {
regulator-name = "vcca1v8_image";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vcc_3v3: SWITCH_REG1 {
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_sd: SWITCH_REG2 {
regulator-name = "vcc3v3_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
usbc1: usb-typec@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&usbc1_int>;
vbus-supply = <&vcc3v3_sys>;
status = "okay";
};
vdd_cpu: regulator@40 {
compatible = "rockchip,rk8600";
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1390000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
hym8563: hym8563@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "hym8563";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PC0 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
};
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_sclktx
&i2s1m0_lrcktx
&i2s1m0_sdi0
&i2s1m0_sdo0>;
rockchip,trcm-sync-tx-only;
status = "okay";
};
&mdio1 {
rgmii_phy1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
pinctrl-0 = <&eth_phy_reset_pin>;
pinctrl-names = "default";
realtek,led-data = <0x2c1b>;
};
};
&pcie2x1 {
status = "okay";
pcie@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
rtl8125: pcie@1,0 {
compatible = "pci10ec,8125";
reg = <0x000000 0 0 0 0>;
realtek,led-data = <0x200 0x2b 0x0 0x0>;
};
};
};
&pcie30phy {
status = "okay";
};
&pcie3x2 {
pinctrl-names = "default";
pinctrl-0 = <&pcie30_reset_pin>;
reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie30>;
status = "okay";
};
&pinctrl {
bt {
bt_reg_on_h: bt-reg-on-h {
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_host_wake_h: bt-host-wake-h {
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_wake_h: bt-wake-h {
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
gmac1 {
eth_phy_reset_pin: eth-phy-reset-pin {
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
gpio-leds {
led_green_pin: led-green-pin {
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
};
led_red_pin: led-red-pin {
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
headphone {
hp_det_pin: hp-det-pin {
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie30 {
pcie30_pwren_h: pcie30-pwren-h {
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
pcie30_reset_pin: pcie30-reset-pin {
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
pmic {
pmic_int: pmic-int {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vcc5v0_usb_host_en: vcc5v0-usb-host-en {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb_host2_en: vcc5v0-usb-host2-en {
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
usbc1_int: usbc1-int {
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio2-supply = <&vcc_1v8>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_1v8>;
vccio7-supply = <&vcc_3v3>;
status = "okay";
};
&pwm3 {
status = "okay";
};
&saradc {
vref-supply = <&vcca_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
max-frequency = <150000000>;
no-sdio;
no-mmc;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdmmc1 {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
disable-wp;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_1v8>;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&pmucru CLK_RTC_32K>;
clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_h &bt_wake_h &bt_reg_on_h>;
vbat-supply = <&vcc_3v3>;
vddio-supply = <&vcc_1v8>;
};
};
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
dr_mode = "host";
extcon = <&usb2phy0>;
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
&usb2phy0_otg {
phy-supply = <&vcc5v0_usb_otg>;
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy1_host {
phy-supply = <&vcc5v0_usb_host2>;
status = "okay";
};
&usb2phy1_otg {
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};

View File

@@ -20,6 +20,17 @@ define Device/ariaboard_photonicat
endef
TARGET_DEVICES += ariaboard_photonicat
define Device/armsom_sige3
DEVICE_VENDOR := ArmSoM
DEVICE_MODEL := Sige3
SOC := rk3568
DEVICE_DTS := rockchip/rk3568-armsom-sige3
BOOT_FLOW := pine64-img
DEVICE_PACKAGES := kmod-brcmfmac kmod-r8125 wpad-openssl \
brcmfmac-firmware-43752-sdio brcmfmac-nvram-43752-sdio
endef
TARGET_DEVICES += armsom_sige3
define Device/armsom_sige7
DEVICE_VENDOR := ArmSoM
DEVICE_MODEL := Sige7

View File

@@ -16,16 +16,21 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s-enterprise.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
@@ -90,19 +92,24 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bp
@@ -86,17 +88,21 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-so
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-armsom-sige3.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mrkaio-m68s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mrkaio-m68s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-photonicat.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-photonicat.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
@@ -33,11 +38,11 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
@@ -105,5 +111,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-or
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb