OpenWrt v21.02.0-rc4: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

README.md

@@ -57,8 +57,8 @@ packages to OpenWrt, please find the fitting repository below.
 * [OpenWrt Packages](https://github.com/openwrt/packages): Community repository
   of ported packages.
 
-* [OpenWrt Routing](https://github.com/openwrt-routing/packages): Packages
-  specifically focused on (mesh) routing.
+* [OpenWrt Routing](https://github.com/openwrt/routing): Packages specifically
+  focused on (mesh) routing.
 
 ## Support Information
 
@@ -74,13 +74,13 @@ For a list of supported devices see the [OpenWrt Hardware Database](https://open
 ### Support Community
 
 * [Forum](https://forum.openwrt.org): For usage, projects, discussions and hardware advise.
-* [Support Chat](https://webchat.freenode.net/#openwrt): Channel `#openwrt` on freenode.net.
+* [Support Chat](https://webchat.oftc.net/#openwrt): Channel `#openwrt` on **oftc.net**.
 
 ### Developer Community
 
 * [Bug Reports](https://bugs.openwrt.org): Report bugs in OpenWrt
 * [Dev Mailing List](https://lists.openwrt.org/mailman/listinfo/openwrt-devel): Send patches
-* [Dev Chat](https://webchat.freenode.net/#openwrt-devel): Channel `#openwrt-devel` on freenode.net.
+* [Dev Chat](https://webchat.oftc.net/#openwrt-devel): Channel `#openwrt-devel` on **oftc.net**.
 
 ## License
 

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://git.openwrt.org/feed/packages.git^4ceeb8fc90ed2c2e650ddddc855e7ed1df071c22
-src-git luci https://git.openwrt.org/project/luci.git^7d913b997601d533cca187cfc1b3057c3c98effc
-src-git routing https://git.openwrt.org/feed/routing.git^5b4d4c7fb6a97cac68c7d8b156fd0ab27bab4dcc
-src-git telephony https://git.openwrt.org/feed/telephony.git^178822957123b821407e1216e9e7314161512ac6
+src-git packages https://git.openwrt.org/feed/packages.git^49b1a6f4cc6e265cb98eb3d3225aca96079d1ec0
+src-git luci https://git.openwrt.org/project/luci.git^132c72c7b75b7c69ec713cd9c44b7566da7f052a
+src-git routing https://git.openwrt.org/feed/routing.git^e7e25b873b8ed4376cdcf82f963db34dda954f02
+src-git telephony https://git.openwrt.org/feed/telephony.git^aa1954024371e02d985b51ec4187fc0745ab4e18

include/feeds.mk

@@ -43,5 +43,11 @@ endef
 
 # 1: package name
 define GetABISuffix
-$(if $(filter-out kmod-%,$(1)),$(if $(ABIV_$(1)),$(ABIV_$(1)),$(foreach v,$(wildcard $(STAGING_DIR)/pkginfo/$(1).version),$(shell cat $(v)))))
+$(if $(ABIV_$(1)),$(ABIV_$(1)),$(call FormatABISuffix,$(1),$(foreach v,$(wildcard $(STAGING_DIR)/pkginfo/$(1).version),$(shell cat $(v)))))
+endef
+
+# 1: package name
+# 2: abi version
+define FormatABISuffix
+$(if $(filter-out kmod-%,$(1)),$(if $(2),$(if $(filter %0 %1 %2 %3 %4 %5 %6 %7 %8 %9,$(1)),-)$(2)))
 endef

include/image-commands.mk

@@ -240,8 +240,11 @@ define Build/jffs2
 endef
 
 define Build/kernel2minor
-	kernel2minor -k $@ -r $@.new $(1)
-	mv $@.new $@
+	$(eval temp_file := $(shell mktemp))
+	cp $@ $(temp_file)
+	kernel2minor -k $(temp_file) -r $(temp_file).new $(1)
+	mv $(temp_file).new $@
+	rm -f $(temp_file)
 endef
 
 define Build/kernel-bin

include/image.mk

@@ -419,7 +419,7 @@ DEFAULT_DEVICE_VARS := \
   DEVICE_DTS_CONFIG DEVICE_DTS_DIR DEVICE_FDT_NUM SOC BOARD_NAME \
   UIMAGE_MAGIC UIMAGE_NAME \
   SUPPORTED_DEVICES IMAGE_METADATA KERNEL_ENTRY KERNEL_LOADADDR \
-  UBOOT_PATH IMAGE_SIZE \
+  IMAGE_PREFIX DEVICE_PACKAGES UBOOT_PATH IMAGE_SIZE \
   DEVICE_COMPAT_VERSION DEVICE_COMPAT_MESSAGE \
   DEVICE_VENDOR DEVICE_MODEL DEVICE_VARIANT \
   DEVICE_ALT0_VENDOR DEVICE_ALT0_MODEL DEVICE_ALT0_VARIANT \
@@ -472,7 +472,8 @@ endef
 ifndef IB
 define Device/Build/initramfs
   $(call Device/Export,$(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE),$(1))
-  $$(_TARGET): $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE))
+  $$(_TARGET): $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) \
+	  $$(if $$(CONFIG_JSON_OVERVIEW_IMAGE_INFO), $(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json,))
 
   $(KDIR)/$$(KERNEL_INITRAMFS_NAME):: image_prepare
   $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)
@@ -481,6 +482,38 @@ define Device/Build/initramfs
   $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/$$(KERNEL_INITRAMFS_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS) image_prepare
 	@rm -f $$@
 	$$(call concat_cmd,$$(KERNEL_INITRAMFS))
+
+  $(call Device/Export,$(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json,$(1))
+
+  $(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json: $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE)
+	@mkdir -p $$(shell dirname $$@)
+	DEVICE_ID="$(1)" \
+	BIN_DIR="$(BIN_DIR)" \
+	SOURCE_DATE_EPOCH=$(SOURCE_DATE_EPOCH) \
+	IMAGE_NAME="$$(notdir $$^)" \
+	IMAGE_TYPE="kernel" \
+	IMAGE_FILESYSTEM="initramfs" \
+	IMAGE_PREFIX="$$(IMAGE_PREFIX)" \
+	DEVICE_VENDOR="$$(DEVICE_VENDOR)" \
+	DEVICE_MODEL="$$(DEVICE_MODEL)" \
+	DEVICE_VARIANT="$$(DEVICE_VARIANT)" \
+	DEVICE_ALT0_VENDOR="$$(DEVICE_ALT0_VENDOR)" \
+	DEVICE_ALT0_MODEL="$$(DEVICE_ALT0_MODEL)" \
+	DEVICE_ALT0_VARIANT="$$(DEVICE_ALT0_VARIANT)" \
+	DEVICE_ALT1_VENDOR="$$(DEVICE_ALT1_VENDOR)" \
+	DEVICE_ALT1_MODEL="$$(DEVICE_ALT1_MODEL)" \
+	DEVICE_ALT1_VARIANT="$$(DEVICE_ALT1_VARIANT)" \
+	DEVICE_ALT2_VENDOR="$$(DEVICE_ALT2_VENDOR)" \
+	DEVICE_ALT2_MODEL="$$(DEVICE_ALT2_MODEL)" \
+	DEVICE_ALT2_VARIANT="$$(DEVICE_ALT2_VARIANT)" \
+	DEVICE_TITLE="$$(DEVICE_TITLE)" \
+	DEVICE_PACKAGES="$$(DEVICE_PACKAGES)" \
+	TARGET="$(BOARD)" \
+	SUBTARGET="$(if $(SUBTARGET),$(SUBTARGET),generic)" \
+	VERSION_NUMBER="$(VERSION_NUMBER)" \
+	VERSION_CODE="$(VERSION_CODE)" \
+	SUPPORTED_DEVICES="$$(SUPPORTED_DEVICES)" \
+	$(TOPDIR)/scripts/json_add_image_info.py $$@
 endef
 endif
 

include/kernel-defaults.mk

@@ -43,7 +43,9 @@ else
 		rmdir $(LINUX_DIR); \
 	fi
 	ln -s $(CONFIG_EXTERNAL_KERNEL_TREE) $(LINUX_DIR)
-	$(_SINGLE) [ -d $(LINUX_DIR)/user_headers ] && rm -rf $(LINUX_DIR)/user_headers
+	if [ -d $(LINUX_DIR)/user_headers ]; then \
+		rm -rf $(LINUX_DIR)/user_headers; \
+	fi
   endef
 endif
 

include/kernel-version.mk

@@ -6,9 +6,9 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-5.4 = .111
+LINUX_VERSION-5.4 = .137
 
-LINUX_KERNEL_HASH-5.4.111 = 21626132658dc34cb41b7aa7b80ecf83751890a71ac1a63d77aea9d488271a03
+LINUX_KERNEL_HASH-5.4.137 = f09e5e366ce5d8bde887cda229ef17138fd1653706a702221f934f99aaa31f7c
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

include/package-ipkg.mk

@@ -99,7 +99,7 @@ _endef=endef
 
 ifeq ($(DUMP),)
   define BuildTarget/ipkg
-    ABIV_$(1):=$(if $(filter-out kmod-%,$(1)),$(ABI_VERSION))
+    ABIV_$(1):=$(call FormatABISuffix,$(1),$(ABI_VERSION))
     PDIR_$(1):=$(call FeedPackageDir,$(1))
     IPKG_$(1):=$$(PDIR_$(1))/$(1)$$(ABIV_$(1))_$(VERSION)_$(PKGARCH).ipk
     IDIR_$(1):=$(PKG_BUILD_DIR)/ipkg-$(PKGARCH)/$(1)

include/prereq-build.mk

@@ -65,11 +65,22 @@ $(eval $(call TestHostCommand,perl-data-dumper, \
 	Please install the Perl Data::Dumper module, \
 	perl -MData::Dumper -e 1))
 
+$(eval $(call TestHostCommand,perl-findbin, \
+	Please install the Perl FindBin module, \
+	perl -MFindBin -e 1))
+
+$(eval $(call TestHostCommand,perl-file-copy, \
+	Please install the Perl File::Copy module, \
+	perl -MFile::Copy -e 1))
+
+$(eval $(call TestHostCommand,perl-file-compare, \
+	Please install the Perl File::Compare module, \
+	perl -MFile::Compare -e 1))
+
 $(eval $(call TestHostCommand,perl-thread-queue, \
 	Please install the Perl Thread::Queue module, \
 	perl -MThread::Queue -e 1))
 
-
 $(eval $(call SetupHostCommand,tar,Please install GNU 'tar', \
 	gtar --version 2>&1 | grep GNU, \
 	gnutar --version 2>&1 | grep GNU, \

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.0-rc1)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.0-rc4)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16046-59980f7aaf)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16256-2d5ee43dc6)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.0-rc1)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.0-rc4)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/base-files/files/bin/config_generate

@@ -40,7 +40,7 @@ generate_static_network() {
 	uci -q batch <<-EOF
 		delete network.loopback
 		set network.loopback='interface'
-		set network.loopback.ifname='lo'
+		set network.loopback.device='lo'
 		set network.loopback.proto='static'
 		set network.loopback.ipaddr='127.0.0.1'
 		set network.loopback.netmask='255.0.0.0'
@@ -91,51 +91,72 @@ generate_static_network() {
 
 addr_offset=2
 generate_network() {
-	local ifname macaddr protocol type ipaddr netmask vlan
+	local ports device macaddr protocol type ipaddr netmask vlan
 	local bridge=$2
 
 	json_select network
 		json_select "$1"
-			json_get_vars ifname macaddr protocol ipaddr netmask vlan
+			json_get_vars device macaddr protocol ipaddr netmask vlan
+			json_get_values ports ports
 		json_select ..
 	json_select ..
 
-	[ -n "$ifname" ] || return
+	[ -n "$device" -o -n "$ports" ] || return
 
-	# force bridge for multi-interface devices (and lan)
-	case "$1:$ifname" in
-		*\ * | lan:*) type="bridge" ;;
-	esac
+	# Force bridge for "lan" as it may have other devices (e.g. wireless)
+	# bridged
+	[ "$1" = "lan" -a -z "$ports" ] && {
+		ports="$device"
+	}
+
+	[ -n "$ports" -a -z "$bridge" ] && {
+		uci -q batch <<-EOF
+			add network device
+			set network.@device[-1].name='br-$1'
+			set network.@device[-1].type='bridge'
+		EOF
+		for port in $ports; do uci add_list network.@device[-1].ports="$port"; done
+		[ -n "$macaddr" ] && {
+			for port in $ports; do
+				uci -q batch <<-EOF
+					add network device
+					set network.@device[-1].name='$port'
+					set network.@device[-1].macaddr='$macaddr'
+				EOF
+			done
+		}
+		device=br-$1
+		type=
+		macaddr=""
+	}
 
 	[ -n "$bridge" ] && {
+		[ -z "$ports" ] && ports="$device"
 		if [ -z "$vlan" ]; then
 			bridge_vlan_id=$((bridge_vlan_id + 1))
 			vlan=$bridge_vlan_id
 		fi
-		generate_bridge_vlan $1 $bridge "$ifname" $vlan
-		ifname=$bridge.$vlan
+		generate_bridge_vlan $1 $bridge "$ports" $vlan
+		device=$bridge.$vlan
 		type=""
 	}
 
+	if [ -n "$macaddr" ]; then
+		uci -q batch <<-EOF
+			add network device
+			set network.@device[-1].name='$device'
+			set network.@device[-1].macaddr='$macaddr'
+		EOF
+	fi
+
 	uci -q batch <<-EOF
 		delete network.$1
 		set network.$1='interface'
 		set network.$1.type='$type'
-		set network.$1.ifname='$ifname'
+		set network.$1.device='$device'
 		set network.$1.proto='none'
 	EOF
 
-	if [ -n "$macaddr" ]; then
-		for name in $ifname; do
-			uci -q batch <<-EOF
-				delete network.$1_${name/./_}_dev
-				set network.$1_${name/./_}_dev='device'
-				set network.$1_${name/./_}_dev.name='$name'
-				set network.$1_${name/./_}_dev.macaddr='$macaddr'
-			EOF
-		done
-	fi
-
 	case "$protocol" in
 		static)
 			local ipad
@@ -156,14 +177,14 @@ generate_network() {
 
 		dhcp)
 			# fixup IPv6 slave interface if parent is a bridge
-			[ "$type" = "bridge" ] && ifname="br-$1"
+			[ "$type" = "bridge" ] && device="br-$1"
 
 			uci set network.$1.proto='dhcp'
 			[ -e /proc/sys/net/ipv6 ] && {
 				uci -q batch <<-EOF
 					delete network.${1}6
 					set network.${1}6='interface'
-					set network.${1}6.ifname='$ifname'
+					set network.${1}6.device='$device'
 					set network.${1}6.proto='dhcpv6'
 				EOF
 			}
@@ -180,7 +201,7 @@ generate_network() {
 					set network.$1.ipv6='1'
 					delete network.${1}6
 					set network.${1}6='interface'
-					set network.${1}6.ifname='@${1}'
+					set network.${1}6.device='@${1}'
 					set network.${1}6.proto='dhcpv6'
 				EOF
 			}

package/base-files/files/etc/init.d/system

@@ -4,8 +4,7 @@
 START=10
 USE_PROCD=1
 
-validate_system_section()
-{
+validate_system_section() {
 	uci_load_validate system system "$1" "$2" \
 		'hostname:string:OpenWrt' \
 		'conloglevel:uinteger' \
@@ -23,8 +22,9 @@ system_config() {
 	echo "$hostname" > /proc/sys/kernel/hostname
 	[ -z "$conloglevel" -a -z "$buffersize" ] || dmesg ${conloglevel:+-n $conloglevel} ${buffersize:+-s $buffersize}
 	echo "$timezone" > /tmp/TZ
-	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/$zonename" ] && \
-		ln -sf "/usr/share/zoneinfo/$zonename" /tmp/localtime && rm -f /tmp/TZ
+	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/${zonename// /_}" ] \
+		&& ln -sf "/usr/share/zoneinfo/${zonename// /_}" /tmp/localtime \
+		&& rm -f /tmp/TZ
 
 	# apply timezone to kernel
 	hwclock -u --systz
@@ -35,8 +35,7 @@ reload_service() {
 	config_foreach validate_system_section system system_config
 }
 
-service_triggers()
-{
+service_triggers() {
 	procd_add_reload_trigger "system"
 	procd_add_validation validate_system_section
 }

package/base-files/files/etc/shinit

@@ -22,7 +22,7 @@ service() {
 			printf "%-30s\t%10s\t%10s\n"  "$F" \
 			$( $($F enabled) && echo "enabled" || echo "disabled" ) \
 			$( [ "$(ubus call service list "{ 'verbose': true, 'name': '$(basename $F)' }" \
-			| jsonfilter -q -e "@.$(basename $F).instances[*].running" | uniq)" = "true" ] \
+			| jsonfilter -q -e "@['$(basename $F)'].instances[*].running" | uniq)" = "true" ] \
 			&& echo "running" || echo "stopped" )
 		done;
 		return 1

package/base-files/files/lib/functions/uci-defaults.sh

@@ -39,7 +39,13 @@ ucidef_set_interface() {
 
 		[ -n "$opt" -a -n "$val" ] || break
 
-		json_add_string "$opt" "$val"
+		[ "$opt" = "device" -a "$val" != "${val/ //}" ] && {
+			json_select_array "ports"
+			for e in $val; do json_add_string "" "$e"; done
+			json_close_array
+		} || {
+			json_add_string "$opt" "$val"
+		}
 	done
 
 	if ! json_is_a protocol string; then
@@ -73,11 +79,11 @@ ucidef_set_compat_version() {
 }
 
 ucidef_set_interface_lan() {
-	ucidef_set_interface "lan" ifname "$1" protocol "${2:-static}"
+	ucidef_set_interface "lan" device "$1" protocol "${2:-static}"
 }
 
 ucidef_set_interface_wan() {
-	ucidef_set_interface "wan" ifname "$1" protocol "${2:-dhcp}"
+	ucidef_set_interface "wan" device "$1" protocol "${2:-dhcp}"
 }
 
 ucidef_set_interfaces_lan_wan() {
@@ -195,14 +201,14 @@ _ucidef_finish_switch_roles() {
 
 			json_select_object "$role"
 				# attach previous interfaces (for multi-switch devices)
-				json_get_var devices ifname
+				json_get_var devices device
 				if ! list_contains devices "$device"; then
 					devices="${devices:+$devices }$device"
 				fi
 			json_select ..
 		json_select ..
 
-		ucidef_set_interface "$role" ifname "$devices"
+		ucidef_set_interface "$role" device "$devices"
 	done
 }
 

package/base-files/files/lib/preinit/10_indicate_preinit

@@ -72,14 +72,20 @@ preinit_config_board() {
 
 	json_select network
 		json_select "lan"
-			json_get_vars ifname
+			json_get_vars device
+			json_get_values ports ports
 		json_select ..
 	json_select ..
 
-	[ -n "$ifname" ] || return
+	[ -n "$device" -o -n "$ports" ] || return
+
+	# swconfig uses $device and DSA uses ports
+	[ -z "$ports" ] && {
+		ports="$device"
+	}
 
 	# only use the first one
-	ifname=${ifname%% *}
+	ifname=${ports%% *}
 
 	if [ -x /sbin/swconfig ]; then
 		# configure the switch, if present
@@ -91,6 +97,8 @@ preinit_config_board() {
 	else
 		# trim any vlan ids
 		ifname=${ifname%\.*}
+		# trim any vlan modifiers like :t
+		ifname=${ifname%\:*}
 	fi
 
 	pi_ifname=$ifname

package/base-files/files/sbin/wifi

@@ -130,10 +130,12 @@ wifi_updown() {
 		ubus_wifi_cmd "$cmd" "$2"
 		scan_wifi
 		cmd=up
+		ubus call network reload
 	}
 	[ reconf = "$1" ] && {
 		scan_wifi
 		cmd=reconf
+		ubus call network reload
 	}
 	ubus_wifi_cmd "$cmd" "$2"
 	_wifi_updown "$@"
@@ -246,7 +248,7 @@ case "$1" in
 	reload) wifi_reload "$2";;
 	reload_legacy) wifi_reload_legacy "$2";;
 	--help|help) usage;;
-	reconf) ubus call network reload; wifi_updown "reconf" "$2";;
-	''|up) ubus call network reload; wifi_updown "enable" "$2";;
+	reconf) wifi_updown "reconf" "$2";;
+	''|up) wifi_updown "enable" "$2";;
 	*) usage; exit 1;;
 esac

package/base-files/image-config.in

@@ -183,7 +183,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/releases/21.02.0-rc1"
+		default "https://downloads.openwrt.org/releases/21.02.0-rc4"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/uboot-envtools/files/ramips

@@ -26,6 +26,10 @@ allnet,all0256n-8m|\
 allnet,all5002)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
+ampedwireless,ally-00x19k|\
+ampedwireless,ally-r1900k)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" "4"
+	;;
 buffalo,wsr-1166dhp|\
 buffalo,wsr-600dhp|\
 mediatek,linkit-smart-7688|\
@@ -34,7 +38,8 @@ xiaomi,mi-router-3g-v2|\
 xiaomi,mi-router-4a-gigabit|\
 xiaomi,mi-router-4c|\
 xiaomi,miwifi-nano|\
-zbtlink,zbt-wg2626)
+zbtlink,zbt-wg2626|\
+zte,mf283plus)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
 	;;
 hootoo,ht-tm05|\
@@ -43,9 +48,13 @@ ravpower,rp-wd03)
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x4000" "0x1000" "0x1000"
 	;;
+jcg,q20)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
+	;;
 linksys,ea7300-v1|\
 linksys,ea7300-v2|\
 linksys,ea7500-v2|\
+linksys,ea8100-v1|\
 xiaomi,mi-router-3g|\
 xiaomi,mi-router-3-pro|\
 xiaomi,mi-router-4|\
@@ -53,6 +62,11 @@ xiaomi,mi-router-ac2100|\
 xiaomi,redmi-router-ac2100)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
 	;;
+zyxel,nr7101)
+	idx="$(find_mtd_index Config)"
+	[ -n "$idx" ] && \
+		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x1000" "0x80000"
+	;;
 esac
 
 config_load ubootenv

package/firmware/amd64-microcode/Makefile

@@ -18,6 +18,8 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-3.$(PKG_VERSION).$(PKG_RELEASE)
 
 PKG_LICENSE_FILE:=LICENSE.amd-ucode
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/amd64-microcode

package/firmware/cypress-nvram/Makefile

@@ -18,6 +18,8 @@ PKG_SOURCE_URL:=https://github.com/openwrt/cypress-nvram.git
 
 PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/cypress-nvram-default

package/firmware/intel-microcode/Makefile

@@ -24,6 +24,8 @@ else
 	MICROCODE:="intel-microcode"
 endif
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/intel-microcode

package/firmware/ipq-wifi/Makefile

@@ -43,6 +43,8 @@ ALLWIFIBOARDS:= \
 	linksys_ea8300 \
 	linksys_mr8300-v0 \
 	luma_wrtq-329acn \
+	mikrotik_hap-ac2 \
+	mikrotik_sxtsq-5-ac \
 	mobipromo_cm520-79f \
 	nec_wg2600hp3 \
 	plasmacloud_pa1200 \
@@ -126,6 +128,8 @@ $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
 $(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
 $(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
+$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
 $(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
 $(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
 $(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))

package/firmware/layerscape/fman-ucode/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://github.com/NXP/qoriq-fm-ucode.git
 PKG_SOURCE_VERSION:=c275e91392e2adab1ed22f3867b8269ca3c54014
 PKG_MIRROR_HASH:=90b619ed501462b92f34f2fabfa09d6aaa5235990891d1c3132821c7d18a39bd
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-fman

package/firmware/layerscape/ls-ddr-phy/Makefile

@@ -18,6 +18,8 @@ PKG_BUILD_DEPENDS:=tfa-layerscape/host
 PKG_LICENSE:=EULA
 PKG_LICENSE_FILES:=NXP-Binary-EULA.txt
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-ddr-phy

package/firmware/layerscape/ls-dpl/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/mc
 PKG_SOURCE_VERSION:=8672a5f5abcd3a354dcab07e03f2a8a69b2e962d
 PKG_MIRROR_HASH:=4b8ad3148aee1e0c034206543472aebb435655fd03a661c4c1be545dcac7ddf0
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/kernel.mk
 

package/firmware/layerscape/ls-mc/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://github.com/NXP/qoriq-mc-binary.git
 PKG_SOURCE_VERSION:=f73683596a7b72124d67b62e64f3dc2bb36b9321
 PKG_MIRROR_HASH:=1cba30c2a6814763c3e155c1cc5fa21998bb6ad5814fcb09e99f98bf36f65d9e
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-mc

package/firmware/layerscape/ls-rcw/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/rc
 PKG_SOURCE_VERSION:=e0fab6d9b61003caef577f7474c2fac61e6ba2ff
 PKG_MIRROR_HASH:=b6bc66e27b7c6db31101fdc2e6be7255181861bd38d8f25eb5eb80c468983eb2
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-rcw

package/firmware/layerscape/ppfe-firmware/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://github.com/NXP/qoriq-engine-pfe-bin.git
 PKG_SOURCE_VERSION:=d3a8ef0760c54ddc243039c86389497e37be90ab
 PKG_MIRROR_HASH:=64be93b8249d298e7b5fd0846787835f0659b6ab6c55b40b809366c79e272eb8
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 RSTRIP:=:

package/firmware/wireless-regdb/Makefile

@@ -1,12 +1,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wireless-regdb
-PKG_VERSION:=2020.11.20
+PKG_VERSION:=2021.04.21
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
-PKG_HASH:=b4164490d82ff7b0086e812ac42ab27baf57be24324d4c0ee1c5dd6ba27f2a52
+PKG_HASH:=9e4c02b2a9710df4dbdb327c39612e8cbbae6495987afeddaebab28c1ea3d8fa
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/kernel/ath10k-ct/Makefile

@@ -1,16 +1,16 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ath10k-ct
-PKG_RELEASE=2
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-01-11
-PKG_SOURCE_VERSION:=9fe1df7d4f783b6b0cd1c99d11979e5a6e6fc40b
-PKG_MIRROR_HASH:=4e30e256716611045e930b95eadaa8bfcadd5bdd8bbe3869cfe0f377920e812b
+PKG_SOURCE_DATE:=2021-06-03
+PKG_SOURCE_VERSION:=b44cd7b2e7b0df5995ece18f358d4dfc40834ba1
+PKG_MIRROR_HASH:=59f961ad425eb1a48fa9c391a325cc0f23845daec9d12673445d3077f9756cf0
 
 # Build the 5.10 ath10k-ct driver version.
 # Probably this should match as closely as

package/kernel/ath10k-ct/patches/164-ath10k-commit-rates-from-mac80211.patch

@@ -1,37 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Tue, 26 Feb 2019 08:06:35 +0100
-Subject: ath10k-ct: apply mac80211 rates to ath10k-ct rate state
-
-The rates from mac80211 have to be copied to the state of ath10k-ct or
-otherwise the ath10k_check_apply_special_rates function overwrites
-them again with some default values. This breaks for example the
-mcast_rate set for a wifi-iface.
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
---- a/ath10k-5.10/mac.c
-+++ b/ath10k-5.10/mac.c
-@@ -6774,6 +6774,7 @@ static void ath10k_recalculate_mgmt_rate
- 		return;
- 	}
- 
-+	arvif->mgt_rate[def->chan->band] = hw_rate_code;
- 	vdev_param = ar->wmi.vdev_param->mgmt_rate;
- 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
- 					hw_rate_code);
-@@ -7000,6 +7001,7 @@ static void ath10k_bss_info_changed(stru
- 			   "mac vdev %d mcast_rate %x\n",
- 			   arvif->vdev_id, rate);
- 
-+		arvif->mcast_rate[band] = rate;
- 		vdev_param = ar->wmi.vdev_param->mcast_data_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- 						vdev_param, rate);
-@@ -7008,6 +7010,7 @@ static void ath10k_bss_info_changed(stru
- 				    "failed to set mcast rate on vdev %i: %d\n",
- 				    arvif->vdev_id,  ret);
- 
-+		arvif->bcast_rate[band] = rate;
- 		vdev_param = ar->wmi.vdev_param->bcast_data_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- 						vdev_param, rate);

package/kernel/ath10k-ct/patches/201-ath10k-add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -210,7 +210,7 @@ v13:
  
  #include "htt.h"
  #include "htc.h"
-@@ -1551,6 +1552,13 @@ struct ath10k {
+@@ -1557,6 +1558,13 @@ struct ath10k {
  	} testmode;
  
  	struct {
@@ -445,7 +445,7 @@ v13:
  {
 --- a/ath10k-5.10/wmi-tlv.c
 +++ b/ath10k-5.10/wmi-tlv.c
-@@ -4585,6 +4585,8 @@ static const struct wmi_ops wmi_tlv_ops
+@@ -4594,6 +4594,8 @@ static const struct wmi_ops wmi_tlv_ops
  	.gen_echo = ath10k_wmi_tlv_op_gen_echo,
  	.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
  	.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,

package/kernel/ath10k-ct/patches/202-ath10k-use-tpt-trigger-by-default.patch

@@ -16,7 +16,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
 
 --- a/ath10k-5.10/core.h
 +++ b/ath10k-5.10/core.h
-@@ -1659,6 +1659,10 @@ struct ath10k {
+@@ -1665,6 +1665,10 @@ struct ath10k {
  	u8 csi_data[4096];
  	u16 csi_data_len;
  
@@ -42,7 +42,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	if (ret)
 --- a/ath10k-5.10/mac.c
 +++ b/ath10k-5.10/mac.c
-@@ -11400,7 +11400,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -11403,7 +11403,7 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  
  #ifdef CPTCFG_MAC80211_LEDS

package/kernel/exfat/Makefile

@@ -7,12 +7,12 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=exfat
-PKG_VERSION:=5.10.1
-PKG_RELEASE:=1
+PKG_VERSION:=5.12.3
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/namjaejeon/linux-exfat-oot/tar.gz/$(PKG_VERSION)?
-PKG_HASH:=0ff77dd7d39eb231d00c3c4909b9fad31ebeeb618bd6fa18fce142becc9c1f98
+PKG_HASH:=43889c73af76c466bbc904aff80354a62ecaa24c7b20e354ff735f5949907982
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/linux-exfat-oot-$(PKG_VERSION)
 
 PKG_MAINTAINER:=

package/kernel/lantiq/ltq-vdsl/Makefile

@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-vr9
 PKG_VERSION:=4.17.18.6
-PKG_RELEASE:=3
+PKG_RELEASE:=4
 
 PKG_BASE_NAME:=drv_dsl_cpe_api
 PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
@@ -60,6 +60,8 @@ CONFIGURE_ARGS += --enable-kernel-include="$(LINUX_DIR)/include" \
 	--enable-linux-26 \
 	--enable-kernelbuild="$(LINUX_DIR)" \
 	--enable-debug-prints=no \
+	--enable-dsl-pm-retx-counters \
+	--enable-dsl-pm-retx-thresholds \
 	ARCH=mips
 
 CONFIGURE_ARGS += --enable-model=full

package/kernel/linux/modules/netsupport.mk

@@ -721,7 +721,7 @@ $(eval $(call KernelPackage,mppe))
 
 
 SCHED_MODULES = $(patsubst $(LINUX_DIR)/net/sched/%.ko,%,$(wildcard $(LINUX_DIR)/net/sched/*.ko))
-SCHED_MODULES_CORE = sch_ingress sch_fq_codel sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_tcindex cls_u32 em_u32 act_mirred act_skbedit cls_matchall
+SCHED_MODULES_CORE = sch_ingress sch_fq_codel sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_tcindex cls_u32 em_u32 act_gact act_mirred act_skbedit cls_matchall
 SCHED_MODULES_FILTER = $(SCHED_MODULES_CORE) act_connmark act_ctinfo sch_cake sch_netem sch_mqprio em_ipset cls_bpf cls_flower act_bpf act_vlan
 SCHED_MODULES_EXTRA = $(filter-out $(SCHED_MODULES_FILTER),$(SCHED_MODULES))
 SCHED_FILES = $(patsubst %,$(LINUX_DIR)/net/sched/%.ko,$(filter $(SCHED_MODULES_CORE),$(SCHED_MODULES)))
@@ -745,6 +745,7 @@ define KernelPackage/sched-core
 	CONFIG_NET_CLS_ROUTE4 \
 	CONFIG_NET_CLS_TCINDEX \
 	CONFIG_NET_CLS_U32 \
+	CONFIG_NET_ACT_GACT \
 	CONFIG_NET_ACT_MIRRED \
 	CONFIG_NET_ACT_SKBEDIT \
 	CONFIG_NET_CLS_MATCHALL \
@@ -899,7 +900,6 @@ define KernelPackage/sched
 	CONFIG_NET_SCH_FQ \
 	CONFIG_NET_SCH_PIE \
 	CONFIG_NET_ACT_POLICE \
-	CONFIG_NET_ACT_GACT \
 	CONFIG_NET_ACT_IPT \
 	CONFIG_NET_ACT_PEDIT \
 	CONFIG_NET_ACT_SIMP \

package/kernel/linux/modules/usb.mk

@@ -561,7 +561,7 @@ $(eval $(call KernelPackage,usb-serial))
 
 define AddDepends/usb-serial
   SUBMENU:=$(USB_MENU)
-  DEPENDS+=kmod-usb-serial $(1)
+  DEPENDS+=+kmod-usb-serial $(1)
 endef
 
 

package/kernel/mac80211/Makefile

@@ -10,10 +10,10 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=5.10.16-1
+PKG_VERSION:=5.10.42-1
 PKG_RELEASE:=1
-PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.10.16/
-PKG_HASH:=12856db780c5023edc47e2d18486eb3346bb7c82f1f2fc48deb3b163142f7d2d
+PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.10.42/
+PKG_HASH:=6876520105240844fdb32d1dcdf2bfdea291a37a96f16c892fda3776ba714fcb
 
 PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -907,10 +907,8 @@ drv_mac80211_setup() {
 		return 1
 	}
 
-	[ -z "$(uci -q -P /var/state show wireless._${phy})" ] && {
-		uci -q -P /var/state set wireless._${phy}=phy
-		wireless_set_data phy="$phy"
-	}
+	wireless_set_data phy="$phy"
+	[ -z "$(uci -q -P /var/state show wireless._${phy})" ] && uci -q -P /var/state set wireless._${phy}=phy
 
 	OLDAPLIST=$(uci -q -P /var/state get wireless._${phy}.aplist)
 	OLDSPLIST=$(uci -q -P /var/state get wireless._${phy}.splist)
@@ -1003,6 +1001,7 @@ drv_mac80211_setup() {
 	[ -n "$hostapd_ctrl" ] && {
 		local no_reload=1
 		if [ -n "$(ubus list | grep hostapd.$primary_ap)" ]; then
+			no_reload=0
 			[ "${NEW_MD5}" = "${OLD_MD5}" ] || {
 				ubus call hostapd.$primary_ap reload
 				no_reload=$?
@@ -1077,6 +1076,10 @@ drv_mac80211_teardown() {
 	json_select data
 	json_get_vars phy
 	json_select ..
+	[ -n "$phy" ] || {
+		echo "Bug: PHY is undefined for device '$1'"
+		return 1
+	}
 
 	mac80211_interface_cleanup "$phy"
 	uci -q -P /var/state revert wireless._${phy}

package/kernel/mac80211/patches/ath/500-ath9k_eeprom_debugfs.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/debug.c
 +++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1361,6 +1361,53 @@ void ath9k_deinit_debug(struct ath_softc
+@@ -1364,6 +1364,53 @@ void ath9k_deinit_debug(struct ath_softc
  	ath9k_cmn_spectral_deinit_debug(&sc->spec_priv);
  }
  
@@ -54,7 +54,7 @@
  int ath9k_init_debug(struct ath_hw *ah)
  {
  	struct ath_common *common = ath9k_hw_common(ah);
-@@ -1380,6 +1427,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1383,6 +1430,8 @@ int ath9k_init_debug(struct ath_hw *ah)
  	ath9k_tx99_init_debug(sc);
  	ath9k_cmn_spectral_init_debug(&sc->spec_priv, sc->debug.debugfs_phy);
  

package/kernel/mac80211/patches/ath/512-ath9k_channelbw_debugfs.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/debug.c
 +++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1408,6 +1408,52 @@ static const struct file_operations fops
+@@ -1411,6 +1411,52 @@ static const struct file_operations fops
  	.owner = THIS_MODULE
  };
  
@@ -53,7 +53,7 @@
  int ath9k_init_debug(struct ath_hw *ah)
  {
  	struct ath_common *common = ath9k_hw_common(ah);
-@@ -1429,6 +1475,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1432,6 +1478,8 @@ int ath9k_init_debug(struct ath_hw *ah)
  
  	debugfs_create_file("eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
  			    &fops_eeprom);

package/kernel/mac80211/patches/ath/530-ath9k_extra_leds.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/ath9k.h
 +++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -843,6 +843,9 @@ static inline int ath9k_dump_btcoex(stru
+@@ -844,6 +844,9 @@ static inline int ath9k_dump_btcoex(stru
  #ifdef CPTCFG_MAC80211_LEDS
  void ath_init_leds(struct ath_softc *sc);
  void ath_deinit_leds(struct ath_softc *sc);
@@ -10,7 +10,7 @@
  #else
  static inline void ath_init_leds(struct ath_softc *sc)
  {
-@@ -979,6 +982,13 @@ void ath_ant_comb_scan(struct ath_softc
+@@ -980,6 +983,13 @@ void ath_ant_comb_scan(struct ath_softc
  
  #define ATH9K_NUM_CHANCTX  2 /* supports 2 operating channels */
  
@@ -24,7 +24,7 @@
  struct ath_softc {
  	struct ieee80211_hw *hw;
  	struct device *dev;
-@@ -1032,9 +1042,8 @@ struct ath_softc {
+@@ -1033,9 +1043,8 @@ struct ath_softc {
  	spinlock_t chan_lock;
  
  #ifdef CPTCFG_MAC80211_LEDS
@@ -192,7 +192,7 @@
  #endif
 --- a/drivers/net/wireless/ath/ath9k/debug.c
 +++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1453,6 +1453,61 @@ static const struct file_operations fops
+@@ -1456,6 +1456,61 @@ static const struct file_operations fops
  	.llseek = default_llseek,
  };
  
@@ -254,7 +254,7 @@
  
  int ath9k_init_debug(struct ath_hw *ah)
  {
-@@ -1477,6 +1532,10 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1480,6 +1535,10 @@ int ath9k_init_debug(struct ath_hw *ah)
  			    &fops_eeprom);
  	debugfs_create_file("chanbw", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
  			    sc, &fops_chanbw);

package/kernel/mac80211/patches/ath/542-ath9k_debugfs_diag.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/debug.c
 +++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1509,6 +1509,50 @@ static const struct file_operations fops
+@@ -1512,6 +1512,50 @@ static const struct file_operations fops
  #endif
  
  
@@ -51,7 +51,7 @@
  int ath9k_init_debug(struct ath_hw *ah)
  {
  	struct ath_common *common = ath9k_hw_common(ah);
-@@ -1536,6 +1580,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1539,6 +1583,8 @@ int ath9k_init_debug(struct ath_hw *ah)
  	debugfs_create_file("gpio_led", S_IWUSR,
  			   sc->debug.debugfs_phy, sc, &fops_gpio_led);
  #endif

package/kernel/mac80211/patches/ath/548-ath9k_enable_gpio_chip.patch

@@ -18,7 +18,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  #include "common.h"
  #include "debug.h"
-@@ -989,6 +990,14 @@ struct ath_led {
+@@ -990,6 +991,14 @@ struct ath_led {
  	struct led_classdev cdev;
  };
  
@@ -33,7 +33,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  struct ath_softc {
  	struct ieee80211_hw *hw;
  	struct device *dev;
-@@ -1044,6 +1053,9 @@ struct ath_softc {
+@@ -1045,6 +1054,9 @@ struct ath_softc {
  #ifdef CPTCFG_MAC80211_LEDS
  	const char *led_default_trigger;
  	struct list_head leds;

package/kernel/mac80211/patches/ath/549-ath9k_enable_gpio_buttons.patch

@@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 ---
 --- a/drivers/net/wireless/ath/ath9k/ath9k.h
 +++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -1055,6 +1055,7 @@ struct ath_softc {
+@@ -1056,6 +1056,7 @@ struct ath_softc {
  	struct list_head leds;
  #ifdef CONFIG_GPIOLIB
  	struct ath9k_gpio_chip *gpiochip;

package/kernel/mac80211/patches/ath/551-ath9k_ubnt_uap_plus_hsr.patch

@@ -381,7 +381,7 @@
  ATH9K_HTC_DEBUGFS=
 --- a/drivers/net/wireless/ath/ath9k/Kconfig
 +++ b/drivers/net/wireless/ath/ath9k/Kconfig
-@@ -60,6 +60,19 @@ config ATH9K_AHB
+@@ -58,6 +58,19 @@ config ATH9K_AHB
  	  Say Y, if you have a SoC with a compatible built-in
  	  wireless MAC. Say N if unsure.
  

package/kernel/mac80211/patches/ath/552-ahb_of.patch

@@ -325,7 +325,7 @@
  
  #include "common.h"
  #include "debug.h"
-@@ -1011,6 +1012,9 @@ struct ath_softc {
+@@ -1012,6 +1013,9 @@ struct ath_softc {
  	struct ath_hw *sc_ah;
  	void __iomem *mem;
  	int irq;

package/kernel/mac80211/patches/ath/560-ath9k-fix-transmitting-to-stations-in-dynamic-SMPS-m.patch

@@ -1,49 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 14 Feb 2021 19:45:50 +0100
-Subject: [PATCH] ath9k: fix transmitting to stations in dynamic SMPS mode
-
-When transmitting to a receiver in dynamic SMPS mode, all transmissions that
-use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to
-give the receiver's extra chains some time to wake up.
-This fixes the tx rate getting stuck at <= MCS7 for some clients, especially
-Intel ones, which make aggressive use of SMPS.
-
-Cc: stable@vger.kernel.org
-Reported-by: Martin Kennedy <hurricos@gmail.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -179,7 +179,8 @@ struct ath_frame_info {
- 	s8 txq;
- 	u8 keyix;
- 	u8 rtscts_rate;
--	u8 retries : 7;
-+	u8 retries : 6;
-+	u8 dyn_smps : 1;
- 	u8 baw_tracked : 1;
- 	u8 tx_power;
- 	enum ath9k_key_type keytype:2;
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -1271,6 +1271,11 @@ static void ath_buf_set_rate(struct ath_
- 				 is_40, is_sgi, is_sp);
- 			if (rix < 8 && (tx_info->flags & IEEE80211_TX_CTL_STBC))
- 				info->rates[i].RateFlags |= ATH9K_RATESERIES_STBC;
-+			if (rix >= 8 && fi->dyn_smps) {
-+				info->rates[i].RateFlags |=
-+					ATH9K_RATESERIES_RTS_CTS;
-+				info->flags |= ATH9K_TXDESC_CTSENA;
-+			}
- 
- 			info->txpower[i] = ath_get_rate_txpower(sc, bf, rix,
- 								is_40, false);
-@@ -2114,6 +2119,7 @@ static void setup_frame_info(struct ieee
- 		fi->keyix = an->ps_key;
- 	else
- 		fi->keyix = ATH9K_TXKEYIX_INVALID;
-+	fi->dyn_smps = sta && sta->smps_mode == IEEE80211_SMPS_DYNAMIC;
- 	fi->keytype = keytype;
- 	fi->framelen = framelen;
- 	fi->tx_power = txpower;

package/kernel/mac80211/patches/ath/922-ath10k-increase-rx-buffer-size-to-2048.patch

@@ -26,7 +26,7 @@ Forwarded: https://patchwork.kernel.org/patch/11367055/
 
 --- a/drivers/net/wireless/ath/ath10k/htt.h
 +++ b/drivers/net/wireless/ath/ath10k/htt.h
-@@ -2242,7 +2242,7 @@ struct htt_rx_chan_info {
+@@ -2243,7 +2243,7 @@ struct htt_rx_chan_info {
   * Should be: sizeof(struct htt_host_rx_desc) + max rx MSDU size,
   * rounded up to a cache line size.
   */

package/kernel/mac80211/patches/ath/930-ath10k_add_tpt_led_trigger.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -9713,6 +9713,21 @@ static int ath10k_mac_init_rd(struct ath
+@@ -9708,6 +9708,21 @@ static int ath10k_mac_init_rd(struct ath
  	return 0;
  }
  
@@ -22,7 +22,7 @@
  int ath10k_mac_register(struct ath10k *ar)
  {
  	static const u32 cipher_suites[] = {
-@@ -10062,6 +10077,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10057,6 +10072,12 @@ int ath10k_mac_register(struct ath10k *a
  
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  

package/kernel/mac80211/patches/ath/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -456,7 +456,7 @@ v13:
  {
 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
 +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
-@@ -4585,6 +4585,8 @@ static const struct wmi_ops wmi_tlv_ops
+@@ -4594,6 +4594,8 @@ static const struct wmi_ops wmi_tlv_ops
  	.gen_echo = ath10k_wmi_tlv_op_gen_echo,
  	.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
  	.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,

package/kernel/mac80211/patches/ath/975-ath10k-use-tpt-trigger-by-default.patch

@@ -42,7 +42,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	if (ret)
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -10079,7 +10079,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10074,7 +10074,7 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  
  #ifdef CPTCFG_MAC80211_LEDS

package/kernel/mac80211/patches/brcm/860-brcmfmac-register-wiphy-s-during-module_init.patch

@@ -11,16 +11,6 @@ module loads successfully.
 Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 ---
 
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1557,6 +1557,7 @@ int __init brcmf_core_init(void)
- {
- 	if (!schedule_work(&brcmf_driver_work))
- 		return -EBUSY;
-+	flush_work(&brcmf_driver_work);
- 
- 	return 0;
- }
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
 @@ -431,6 +431,7 @@ struct brcmf_fw {

package/kernel/mac80211/patches/build/001-fix_build.patch

@@ -55,8 +55,8 @@
 -				echo ""							;\
 -			done								\
 -		) > Kconfig.kernel							;\
--		kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion |	\
--			sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d')		;\
+-		kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) M=$(BACKPORT_DIR)	\
+-			kernelversion |	sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d');\
 -		test "$$kver" != "" || echo "Kernel version parse failed!"		;\
 -		test "$$kver" != ""							;\
 -		kvers="$$(seq 14 39 | sed 's/^/2.6./')"					;\
@@ -112,8 +112,8 @@
 +	@echo " done."
 +
 +Kconfig.versions: Kconfig.kernel
-+	@kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion |	\
-+		sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d')		;\
++	@kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) M=$(BACKPORT_DIR) \
++		kernelversion |	sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d');\
 +	test "$$kver" != "" || echo "Kernel version parse failed!"		;\
 +	test "$$kver" != ""							;\
 +	kvers="$$(seq 14 39 | sed 's/^/2.6./')"					;\

package/kernel/mac80211/patches/mwl/700-mwl8k-missing-pci-id-for-WNR854T.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/marvell/mwl8k.c
 +++ b/drivers/net/wireless/marvell/mwl8k.c
-@@ -5694,6 +5694,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
+@@ -5695,6 +5695,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
  MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API));
  
  static const struct pci_device_id mwl8k_pci_id_table[] = {

package/kernel/mac80211/patches/mwl/940-mwl8k_init_devices_synchronously.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/marvell/mwl8k.c
 +++ b/drivers/net/wireless/marvell/mwl8k.c
-@@ -6279,6 +6279,8 @@ static int mwl8k_probe(struct pci_dev *p
+@@ -6280,6 +6280,8 @@ static int mwl8k_probe(struct pci_dev *p
  
  	priv->running_bsses = 0;
  
@@ -9,7 +9,7 @@
  	return rc;
  
  err_stop_firmware:
-@@ -6312,8 +6314,6 @@ static void mwl8k_remove(struct pci_dev
+@@ -6313,8 +6315,6 @@ static void mwl8k_remove(struct pci_dev
  		return;
  	priv = hw->priv;
  

package/kernel/mac80211/patches/rtl/002-v5.13-rtlwifi-implement-set_tim-by-update-beacon-content.patch

@@ -0,0 +1,118 @@
+Date: Mon, 19 Apr 2021 14:59:56 +0800
+From: Ping-Ke Shih <pkshih@realtek.com>
+To: <kvalo@codeaurora.org>
+CC: <linux-wireless@vger.kernel.org>, <mail@maciej.szmigiero.name>,
+        <Larry.Finger@lwfinger.net>
+Subject: [PATCH] rtlwifi: implement set_tim by update beacon content
+
+Once beacon content is changed, we update the content to wifi card by
+send_beacon_frame(). Then, STA with PS can wake up properly to receive its
+packets.
+
+Since we update beacon content to PCI wifi devices every beacon interval,
+the only one usb device, 8192CU, needs to update beacon content when
+mac80211 calling set_tim.
+
+Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
+Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
+Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
+---
+ drivers/net/wireless/realtek/rtlwifi/core.c | 32 +++++++++++++++++++++
+ drivers/net/wireless/realtek/rtlwifi/core.h |  1 +
+ drivers/net/wireless/realtek/rtlwifi/usb.c  |  3 ++
+ drivers/net/wireless/realtek/rtlwifi/wifi.h |  1 +
+ 4 files changed, 37 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtlwifi/core.c
++++ b/drivers/net/wireless/realtek/rtlwifi/core.c
+@@ -1018,6 +1018,25 @@ static void send_beacon_frame(struct iee
+ 	}
+ }
+ 
++void rtl_update_beacon_work_callback(struct work_struct *work)
++{
++	struct rtl_works *rtlworks =
++	    container_of(work, struct rtl_works, update_beacon_work);
++	struct ieee80211_hw *hw = rtlworks->hw;
++	struct rtl_priv *rtlpriv = rtl_priv(hw);
++	struct ieee80211_vif *vif = rtlpriv->mac80211.vif;
++
++	if (!vif) {
++		WARN_ONCE(true, "no vif to update beacon\n");
++		return;
++	}
++
++	mutex_lock(&rtlpriv->locks.conf_mutex);
++	send_beacon_frame(hw, vif);
++	mutex_unlock(&rtlpriv->locks.conf_mutex);
++}
++EXPORT_SYMBOL_GPL(rtl_update_beacon_work_callback);
++
+ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
+ 				    struct ieee80211_vif *vif,
+ 				    struct ieee80211_bss_conf *bss_conf,
+@@ -1747,6 +1766,18 @@ static void rtl_op_flush(struct ieee8021
+ 		rtlpriv->intf_ops->flush(hw, queues, drop);
+ }
+ 
++static int rtl_op_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
++			  bool set)
++{
++	struct rtl_priv *rtlpriv = rtl_priv(hw);
++	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
++
++	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192CU)
++		schedule_work(&rtlpriv->works.update_beacon_work);
++
++	return 0;
++}
++
+ /*	Description:
+  *		This routine deals with the Power Configuration CMD
+  *		 parsing for RTL8723/RTL8188E Series IC.
+@@ -1903,6 +1934,7 @@ const struct ieee80211_ops rtl_ops = {
+ 	.sta_add = rtl_op_sta_add,
+ 	.sta_remove = rtl_op_sta_remove,
+ 	.flush = rtl_op_flush,
++	.set_tim = rtl_op_set_tim,
+ };
+ EXPORT_SYMBOL_GPL(rtl_ops);
+ 
+--- a/drivers/net/wireless/realtek/rtlwifi/core.h
++++ b/drivers/net/wireless/realtek/rtlwifi/core.h
+@@ -60,5 +60,6 @@ void rtl_bb_delay(struct ieee80211_hw *h
+ bool rtl_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb);
+ bool rtl_btc_status_false(void);
+ void rtl_dm_diginit(struct ieee80211_hw *hw, u32 cur_igval);
++void rtl_update_beacon_work_callback(struct work_struct *work);
+ 
+ #endif
+--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
++++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
+@@ -807,6 +807,7 @@ static void rtl_usb_stop(struct ieee8021
+ 
+ 	tasklet_kill(&rtlusb->rx_work_tasklet);
+ 	cancel_work_sync(&rtlpriv->works.lps_change_work);
++	cancel_work_sync(&rtlpriv->works.update_beacon_work);
+ 
+ 	flush_workqueue(rtlpriv->works.rtl_wq);
+ 
+@@ -1033,6 +1034,8 @@ int rtl_usb_probe(struct usb_interface *
+ 		  rtl_fill_h2c_cmd_work_callback);
+ 	INIT_WORK(&rtlpriv->works.lps_change_work,
+ 		  rtl_lps_change_work_callback);
++	INIT_WORK(&rtlpriv->works.update_beacon_work,
++		  rtl_update_beacon_work_callback);
+ 
+ 	rtlpriv->usb_data_index = 0;
+ 	init_completion(&rtlpriv->firmware_loading_complete);
+--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
++++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
+@@ -2487,6 +2487,7 @@ struct rtl_works {
+ 
+ 	struct work_struct lps_change_work;
+ 	struct work_struct fill_h2c_cmd;
++	struct work_struct update_beacon_work;
+ };
+ 
+ struct rtl_debug {

package/kernel/mac80211/patches/subsys/010-sync-nl80211_h.patch

@@ -0,0 +1,297 @@
+--- a/include/uapi/linux/nl80211.h
++++ b/include/uapi/linux/nl80211.h
+@@ -655,6 +655,9 @@
+  *	When a security association was established on an 802.1X network using
+  *	fast transition, this event should be followed by an
+  *	%NL80211_CMD_PORT_AUTHORIZED event.
++ *	Following a %NL80211_CMD_ROAM event userspace can issue
++ *	%NL80211_CMD_GET_SCAN in order to obtain the scan information for the
++ *	new BSS the card/driver roamed to.
+  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+  *	userspace that a connection was dropped by the AP or due to other
+  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+@@ -757,7 +760,8 @@
+  *	of any other interfaces, and other interfaces will again take
+  *	precedence when they are used.
+  *
+- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
++ *	(no longer supported).
+  *
+  * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+  *	multicast to unicast conversion. When enabled, all multicast packets
+@@ -1177,6 +1181,10 @@
+  *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+  *	if the recipient acknowledged the frame.
+  *
++ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
++ *	passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
++ *	specify the wiphy index to be applied to.
++ *
+  * @NL80211_CMD_MAX: highest used command number
+  * @__NL80211_CMD_AFTER_LAST: internal use
+  */
+@@ -1407,6 +1415,8 @@ enum nl80211_commands {
+ 
+ 	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+ 
++	NL80211_CMD_SET_SAR_SPECS,
++
+ 	/* add new commands above here */
+ 
+ 	/* used to define NL80211_CMD_MAX below */
+@@ -1750,8 +1760,9 @@ enum nl80211_commands {
+  *	specify just a single bitrate, which is to be used for the beacon.
+  *	The driver must also specify support for this with the extended
+  *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
+- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HT,
++ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT and
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HE.
+  *
+  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+@@ -1955,8 +1966,15 @@ enum nl80211_commands {
+  * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+  *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+  *	to be filled by the FW.
+- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
+- *      this feature.  Currently, only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
+  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+  *      ATTR_HT_CAPABILITY to which attention should be paid.
+  *      Currently, only mac80211 NICs support this feature.
+@@ -2077,7 +2095,8 @@ enum nl80211_commands {
+  *	until the channel switch event.
+  * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+  *	must be blocked on the current channel (before the channel switch
+- *	operation).
++ *	operation). Also included in the channel switch started event if quiet
++ *	was requested by the AP.
+  * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+  *	for the time while performing a channel switch.
+  * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
+@@ -2527,6 +2546,20 @@ enum nl80211_commands {
+  *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+  *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+  *
++ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
++ *	derivation in WPA3-Personal networks which are using SAE authentication.
++ *	This is a u8 attribute that encapsulates one of the values from
++ *	&enum nl80211_sae_pwe_mechanism.
++ *
++ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
++ *	used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
++ *	of %nl80211_sar_attrs which specifies the sar type and related
++ *	sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
++ *
++ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
++ *	disassoc events to indicate that an immediate reconnect to the AP
++ *	is desired.
++ *
+  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
+  * @NL80211_ATTR_MAX: highest attribute number currently defined
+  * @__NL80211_ATTR_AFTER_LAST: internal use
+@@ -3016,6 +3049,14 @@ enum nl80211_attrs {
+ 	NL80211_ATTR_S1G_CAPABILITY,
+ 	NL80211_ATTR_S1G_CAPABILITY_MASK,
+ 
++	NL80211_ATTR_SAE_PWE,
++
++	NL80211_ATTR_RECONNECT_REQUESTED,
++
++	NL80211_ATTR_SAR_SPEC,
++
++	NL80211_ATTR_DISABLE_HE,
++
+ 	/* add attributes here, update the policy in nl80211.c */
+ 
+ 	__NL80211_ATTR_AFTER_LAST,
+@@ -5896,6 +5937,19 @@ enum nl80211_feature_flags {
+  * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+  *	unsolicited broadcast probe response transmission
+  *
++ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
++ *	configuration (AP/mesh) with HE rates.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
++ *      frame protection for all management frames exchanged during the
++ *      negotiation and range measurement procedure.
++ *
+  * @NUM_NL80211_EXT_FEATURES: number of extended features.
+  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+  */
+@@ -5956,6 +6010,10 @@ enum nl80211_ext_feature_index {
+ 	NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+ 	NL80211_EXT_FEATURE_FILS_DISCOVERY,
+ 	NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
++	NL80211_EXT_FEATURE_BEACON_RATE_HE,
++	NL80211_EXT_FEATURE_SECURE_LTF,
++	NL80211_EXT_FEATURE_SECURE_RTT,
++	NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ 
+ 	/* add new features before the definition below */
+ 	NUM_NL80211_EXT_FEATURES,
+@@ -6253,11 +6311,13 @@ struct nl80211_vendor_cmd_info {
+  * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+  * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+  * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
++ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
+  */
+ enum nl80211_tdls_peer_capability {
+ 	NL80211_TDLS_PEER_HT = 1<<0,
+ 	NL80211_TDLS_PEER_VHT = 1<<1,
+ 	NL80211_TDLS_PEER_WMM = 1<<2,
++	NL80211_TDLS_PEER_HE = 1<<3,
+ };
+ 
+ /**
+@@ -6849,6 +6909,9 @@ enum nl80211_peer_measurement_ftm_capa {
+  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+  *	ranging will be used.
++ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
++ *	valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
++ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+  *
+  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
+  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
+@@ -6867,6 +6930,7 @@ enum nl80211_peer_measurement_ftm_req {
+ 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+ 	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
+ 	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
++	NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
+ 
+ 	/* keep last */
+ 	NUM_NL80211_PMSR_FTM_REQ_ATTR,
+@@ -7124,4 +7188,115 @@ enum nl80211_unsol_bcast_probe_resp_attr
+ 	NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+ 		__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+ };
++
++/**
++ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
++ *	derivation. Applicable only when WPA3-Personal SAE authentication is
++ *	used.
++ *
++ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
++ *	attribute is not present from userspace.
++ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
++ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
++ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
++ *	can be used.
++ */
++enum nl80211_sae_pwe_mechanism {
++	NL80211_SAE_PWE_UNSPECIFIED,
++	NL80211_SAE_PWE_HUNT_AND_PECK,
++	NL80211_SAE_PWE_HASH_TO_ELEMENT,
++	NL80211_SAE_PWE_BOTH,
++};
++
++/**
++ * enum nl80211_sar_type - type of SAR specs
++ *
++ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
++ *
++ */
++enum nl80211_sar_type {
++	NL80211_SAR_TYPE_POWER,
++
++	/* add new type here */
++
++	/* Keep last */
++	NUM_NL80211_SAR_TYPE,
++};
++
++/**
++ * enum nl80211_sar_attrs - Attributes for SAR spec
++ *
++ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
++ *
++ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
++ *	limit specifications. Each specification contains a set
++ *	of %nl80211_sar_specs_attrs.
++ *
++ *	For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
++ *	and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
++ *
++ *	For sar_capa dump, it contains array of
++ *	%NL80211_SAR_ATTR_SPECS_START_FREQ
++ *	and %NL80211_SAR_ATTR_SPECS_END_FREQ.
++ *
++ * @__NL80211_SAR_ATTR_LAST: Internal
++ * @NL80211_SAR_ATTR_MAX: highest sar attribute
++ *
++ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
++ */
++enum nl80211_sar_attrs {
++	__NL80211_SAR_ATTR_INVALID,
++
++	NL80211_SAR_ATTR_TYPE,
++	NL80211_SAR_ATTR_SPECS,
++
++	__NL80211_SAR_ATTR_LAST,
++	NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
++};
++
++/**
++ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
++ *
++ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
++ *	power limit value in units of 0.25 dBm if type is
++ *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
++ *	0 means userspace doesn't have SAR limitation on this associated range.
++ *
++ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
++ *	index of exported freq range table and the associated power limitation
++ *	is applied to this range.
++ *
++ *	Userspace isn't required to set all the ranges advertised by WLAN driver,
++ *	and userspace can skip some certain ranges. These skipped ranges don't
++ *	have SAR limitations, and they are same as setting the
++ *	%NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
++ *	value higher than regulatory allowed value just means SAR power
++ *	limitation is removed, but it's required to set at least one range.
++ *	It's not allowed to set duplicated range in one SET operation.
++ *
++ *	Every SET operation overwrites previous SET operation.
++ *
++ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
++ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
++ */
++enum nl80211_sar_specs_attrs {
++	__NL80211_SAR_ATTR_SPECS_INVALID,
++
++	NL80211_SAR_ATTR_SPECS_POWER,
++	NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
++	NL80211_SAR_ATTR_SPECS_START_FREQ,
++	NL80211_SAR_ATTR_SPECS_END_FREQ,
++
++	__NL80211_SAR_ATTR_SPECS_LAST,
++	NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
++};
++
+ #endif /* __LINUX_NL80211_H */

package/kernel/mac80211/patches/subsys/100-remove-cryptoapi-dependencies.patch

@@ -20,7 +20,7 @@
  	ethtool.o \
 --- a/net/mac80211/aead_api.c
 +++ /dev/null
-@@ -1,112 +0,0 @@
+@@ -1,113 +0,0 @@
 -// SPDX-License-Identifier: GPL-2.0-only
 -/*
 - * Copyright 2003-2004, Instant802 Networks, Inc.
@@ -46,6 +46,7 @@
 -	struct aead_request *aead_req;
 -	int reqsize = sizeof(*aead_req) + crypto_aead_reqsize(tfm);
 -	u8 *__aad;
+-	int ret;
 -
 -	aead_req = kzalloc(reqsize + aad_len, GFP_ATOMIC);
 -	if (!aead_req)
@@ -63,10 +64,10 @@
 -	aead_request_set_crypt(aead_req, sg, sg, data_len, b_0);
 -	aead_request_set_ad(aead_req, sg[0].length);
 -
--	crypto_aead_encrypt(aead_req);
+-	ret = crypto_aead_encrypt(aead_req);
 -	kfree_sensitive(aead_req);
 -
--	return 0;
+-	return ret;
 -}
 -
 -int aead_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, size_t aad_len,
@@ -378,7 +379,7 @@
  #endif /* AES_GCM_H */
 --- a/net/mac80211/wpa.c
 +++ b/net/mac80211/wpa.c
-@@ -311,7 +311,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
+@@ -312,7 +312,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
  }
  
  
@@ -388,7 +389,7 @@
  {
  	__le16 mask_fc;
  	int a4_included, mgmt;
-@@ -341,14 +342,8 @@ static void ccmp_special_blocks(struct s
+@@ -342,14 +343,8 @@ static void ccmp_special_blocks(struct s
  	else
  		qos_tid = 0;
  
@@ -405,7 +406,7 @@
  
  	/* Nonce: Nonce Flags | A2 | PN
  	 * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
-@@ -356,6 +351,8 @@ static void ccmp_special_blocks(struct s
+@@ -357,6 +352,8 @@ static void ccmp_special_blocks(struct s
  	b_0[1] = qos_tid | (mgmt << 4);
  	memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
  	memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
@@ -414,7 +415,7 @@
  
  	/* AAD (extra authenticate-only data) / masked 802.11 header
  	 * FC | A1 | A2 | A3 | SC | [A4] | [QC] */
-@@ -412,7 +409,7 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -413,7 +410,7 @@ static int ccmp_encrypt_skb(struct ieee8
  	u8 *pos;
  	u8 pn[6];
  	u64 pn64;
@@ -423,7 +424,7 @@
  	u8 b_0[AES_BLOCK_SIZE];
  
  	if (info->control.hw_key &&
-@@ -467,9 +464,11 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -468,9 +465,11 @@ static int ccmp_encrypt_skb(struct ieee8
  		return 0;
  
  	pos += IEEE80211_CCMP_HDR_LEN;
@@ -438,7 +439,7 @@
  }
  
  
-@@ -542,13 +541,13 @@ ieee80211_crypto_ccmp_decrypt(struct iee
+@@ -543,13 +542,13 @@ ieee80211_crypto_ccmp_decrypt(struct iee
  			u8 aad[2 * AES_BLOCK_SIZE];
  			u8 b_0[AES_BLOCK_SIZE];
  			/* hardware didn't decrypt/verify MIC */
@@ -454,7 +455,7 @@
  				return RX_DROP_UNUSABLE;
  		}
  
-@@ -643,7 +642,7 @@ static int gcmp_encrypt_skb(struct ieee8
+@@ -646,7 +645,7 @@ static int gcmp_encrypt_skb(struct ieee8
  	u8 *pos;
  	u8 pn[6];
  	u64 pn64;
@@ -463,7 +464,7 @@
  	u8 j_0[AES_BLOCK_SIZE];
  
  	if (info->control.hw_key &&
-@@ -700,8 +699,10 @@ static int gcmp_encrypt_skb(struct ieee8
+@@ -703,8 +702,10 @@ static int gcmp_encrypt_skb(struct ieee8
  
  	pos += IEEE80211_GCMP_HDR_LEN;
  	gcmp_special_blocks(skb, pn, j_0, aad);
@@ -476,7 +477,7 @@
  }
  
  ieee80211_tx_result
-@@ -1128,9 +1129,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct
+@@ -1133,9 +1134,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct
  	struct ieee80211_key *key = tx->key;
  	struct ieee80211_mmie_16 *mmie;
  	struct ieee80211_hdr *hdr;
@@ -488,7 +489,7 @@
  
  	if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
  		return TX_DROP;
-@@ -1176,7 +1177,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
+@@ -1181,7 +1182,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
  	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
  	struct ieee80211_key *key = rx->key;
  	struct ieee80211_mmie_16 *mmie;

package/kernel/mac80211/patches/subsys/150-disable_addr_notifier.patch

@@ -18,7 +18,7 @@
  static int ieee80211_ifa6_changed(struct notifier_block *nb,
  				  unsigned long data, void *arg)
  {
-@@ -1301,14 +1301,14 @@ int ieee80211_register_hw(struct ieee802
+@@ -1315,14 +1315,14 @@ int ieee80211_register_hw(struct ieee802
  
  	rtnl_unlock();
  
@@ -35,7 +35,7 @@
  	local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
  	result = register_inet6addr_notifier(&local->ifa6_notifier);
  	if (result)
-@@ -1317,13 +1317,13 @@ int ieee80211_register_hw(struct ieee802
+@@ -1331,13 +1331,13 @@ int ieee80211_register_hw(struct ieee802
  
  	return 0;
  
@@ -52,7 +52,7 @@
   fail_ifa:
  #endif
  	wiphy_unregister(local->hw.wiphy);
-@@ -1351,10 +1351,10 @@ void ieee80211_unregister_hw(struct ieee
+@@ -1365,10 +1365,10 @@ void ieee80211_unregister_hw(struct ieee
  	tasklet_kill(&local->tx_pending_tasklet);
  	tasklet_kill(&local->tasklet);
  

package/kernel/mac80211/patches/subsys/210-ap_scan.patch

@@ -1,6 +1,6 @@
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -2442,7 +2442,7 @@ static int ieee80211_scan(struct wiphy *
+@@ -2444,7 +2444,7 @@ static int ieee80211_scan(struct wiphy *
  		 * the  frames sent while scanning on other channel will be
  		 * lost)
  		 */

package/kernel/mac80211/patches/subsys/300-cfg80211-support-immediate-reconnect-request-hint.patch

@@ -31,31 +31,9 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  /**
   * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame
---- a/include/uapi/linux/nl80211.h
-+++ b/include/uapi/linux/nl80211.h
-@@ -2527,6 +2527,10 @@ enum nl80211_commands {
-  *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
-  *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
-  *
-+ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
-+ *	disassoc events to indicate that an immediate reconnect to the AP
-+ *	is desired.
-+ *
-  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
-  * @NL80211_ATTR_MAX: highest attribute number currently defined
-  * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -3016,6 +3020,8 @@ enum nl80211_attrs {
- 	NL80211_ATTR_S1G_CAPABILITY,
- 	NL80211_ATTR_S1G_CAPABILITY_MASK,
- 
-+	NL80211_ATTR_RECONNECT_REQUESTED,
-+
- 	/* add attributes here, update the policy in nl80211.c */
- 
- 	__NL80211_ATTR_AFTER_LAST,
 --- a/net/mac80211/mlme.c
 +++ b/net/mac80211/mlme.c
-@@ -2729,7 +2729,7 @@ static void ieee80211_report_disconnect(
+@@ -2734,7 +2734,7 @@ static void ieee80211_report_disconnect(
  	};
  
  	if (tx)
@@ -64,7 +42,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	else
  		cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
  
-@@ -4716,7 +4716,8 @@ void ieee80211_mgd_quiesce(struct ieee80
+@@ -4724,7 +4724,8 @@ void ieee80211_mgd_quiesce(struct ieee80
  		if (ifmgd->auth_data)
  			ieee80211_destroy_auth_data(sdata, false);
  		cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
@@ -166,7 +144,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
 --- a/net/wireless/nl80211.c
 +++ b/net/wireless/nl80211.c
-@@ -732,6 +732,7 @@ static const struct nla_policy nl80211_p
+@@ -736,6 +736,7 @@ static const struct nla_policy nl80211_p
  		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
  	[NL80211_ATTR_S1G_CAPABILITY_MASK] =
  		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
@@ -174,7 +152,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  };
  
  /* policy for the key attributes */
-@@ -15899,7 +15900,7 @@ static void nl80211_send_mlme_event(stru
+@@ -15903,7 +15904,7 @@ static void nl80211_send_mlme_event(stru
  				    const u8 *buf, size_t len,
  				    enum nl80211_commands cmd, gfp_t gfp,
  				    int uapsd_queues, const u8 *req_ies,
@@ -183,7 +161,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  {
  	struct sk_buff *msg;
  	void *hdr;
-@@ -15921,6 +15922,9 @@ static void nl80211_send_mlme_event(stru
+@@ -15925,6 +15926,9 @@ static void nl80211_send_mlme_event(stru
  	     nla_put(msg, NL80211_ATTR_REQ_IE, req_ies_len, req_ies)))
  		goto nla_put_failure;
  
@@ -193,7 +171,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	if (uapsd_queues >= 0) {
  		struct nlattr *nla_wmm =
  			nla_nest_start_noflag(msg, NL80211_ATTR_STA_WME);
-@@ -15949,7 +15953,8 @@ void nl80211_send_rx_auth(struct cfg8021
+@@ -15953,7 +15957,8 @@ void nl80211_send_rx_auth(struct cfg8021
  			  size_t len, gfp_t gfp)
  {
  	nl80211_send_mlme_event(rdev, netdev, buf, len,
@@ -203,7 +181,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
-@@ -15959,23 +15964,25 @@ void nl80211_send_rx_assoc(struct cfg802
+@@ -15963,23 +15968,25 @@ void nl80211_send_rx_assoc(struct cfg802
  {
  	nl80211_send_mlme_event(rdev, netdev, buf, len,
  				NL80211_CMD_ASSOCIATE, gfp, uapsd_queues,
@@ -234,7 +212,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev, const u8 *buf,
-@@ -16006,7 +16013,7 @@ void cfg80211_rx_unprot_mlme_mgmt(struct
+@@ -16010,7 +16017,7 @@ void cfg80211_rx_unprot_mlme_mgmt(struct
  
  	trace_cfg80211_rx_unprot_mlme_mgmt(dev, buf, len);
  	nl80211_send_mlme_event(rdev, dev, buf, len, cmd, GFP_ATOMIC, -1,

package/kernel/mac80211/patches/subsys/301-mac80211-support-driver-based-disconnect-with-reconn.patch

@@ -34,7 +34,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
   * @vif: &struct ieee80211_vif pointer from the add_interface callback.
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -461,7 +461,9 @@ struct ieee80211_if_managed {
+@@ -450,7 +450,9 @@ struct ieee80211_if_managed {
  	unsigned long probe_timeout;
  	int probe_send_count;
  	bool nullfunc_failed;
@@ -47,7 +47,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	struct ieee80211_mgd_auth_data *auth_data;
 --- a/net/mac80211/mlme.c
 +++ b/net/mac80211/mlme.c
-@@ -2720,7 +2720,7 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get)
+@@ -2725,7 +2725,7 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get)
  
  static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
  					const u8 *buf, size_t len, bool tx,
@@ -56,7 +56,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  {
  	struct ieee80211_event event = {
  		.type = MLME_EVENT,
-@@ -2729,7 +2729,7 @@ static void ieee80211_report_disconnect(
+@@ -2734,7 +2734,7 @@ static void ieee80211_report_disconnect(
  	};
  
  	if (tx)
@@ -65,7 +65,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	else
  		cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
  
-@@ -2751,13 +2751,18 @@ static void __ieee80211_disconnect(struc
+@@ -2756,13 +2756,18 @@ static void __ieee80211_disconnect(struc
  
  	tx = !sdata->csa_block_tx;
  
@@ -89,7 +89,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  			       tx, frame_buf);
  	mutex_lock(&local->mtx);
  	sdata->vif.csa_active = false;
-@@ -2770,7 +2775,9 @@ static void __ieee80211_disconnect(struc
+@@ -2775,7 +2780,9 @@ static void __ieee80211_disconnect(struc
  	mutex_unlock(&local->mtx);
  
  	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
@@ -100,7 +100,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  	sdata_unlock(sdata);
  }
-@@ -2789,6 +2796,13 @@ static void ieee80211_beacon_connection_
+@@ -2794,6 +2801,13 @@ static void ieee80211_beacon_connection_
  		sdata_info(sdata, "Connection to AP %pM lost\n",
  			   ifmgd->bssid);
  		__ieee80211_disconnect(sdata);
@@ -114,7 +114,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	} else {
  		ieee80211_mgd_probe_ap(sdata, true);
  	}
-@@ -2827,6 +2841,21 @@ void ieee80211_connection_loss(struct ie
+@@ -2832,6 +2846,21 @@ void ieee80211_connection_loss(struct ie
  }
  EXPORT_SYMBOL(ieee80211_connection_loss);
  
@@ -136,7 +136,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
  					bool assoc)
-@@ -3130,7 +3159,7 @@ static void ieee80211_rx_mgmt_deauth(str
+@@ -3135,7 +3164,7 @@ static void ieee80211_rx_mgmt_deauth(str
  		ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
  
  		ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
@@ -145,7 +145,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return;
  	}
  
-@@ -3179,7 +3208,8 @@ static void ieee80211_rx_mgmt_disassoc(s
+@@ -3184,7 +3213,8 @@ static void ieee80211_rx_mgmt_disassoc(s
  
  	ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
  
@@ -155,7 +155,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
-@@ -4199,7 +4229,8 @@ static void ieee80211_rx_mgmt_beacon(str
+@@ -4204,7 +4234,8 @@ static void ieee80211_rx_mgmt_beacon(str
  				       true, deauth_buf);
  		ieee80211_report_disconnect(sdata, deauth_buf,
  					    sizeof(deauth_buf), true,
@@ -165,7 +165,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return;
  	}
  
-@@ -4344,7 +4375,7 @@ static void ieee80211_sta_connection_los
+@@ -4349,7 +4380,7 @@ static void ieee80211_sta_connection_los
  			       tx, frame_buf);
  
  	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
@@ -174,7 +174,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
-@@ -5431,7 +5462,8 @@ int ieee80211_mgd_auth(struct ieee80211_
+@@ -5439,7 +5470,8 @@ int ieee80211_mgd_auth(struct ieee80211_
  
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -184,7 +184,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	}
  
  	sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
-@@ -5503,7 +5535,8 @@ int ieee80211_mgd_assoc(struct ieee80211
+@@ -5511,7 +5543,8 @@ int ieee80211_mgd_assoc(struct ieee80211
  
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -194,7 +194,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	}
  
  	if (ifmgd->auth_data && !ifmgd->auth_data->done) {
-@@ -5802,7 +5835,7 @@ int ieee80211_mgd_deauth(struct ieee8021
+@@ -5810,7 +5843,7 @@ int ieee80211_mgd_deauth(struct ieee8021
  		ieee80211_destroy_auth_data(sdata, false);
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -203,7 +203,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  		return 0;
  	}
-@@ -5822,7 +5855,7 @@ int ieee80211_mgd_deauth(struct ieee8021
+@@ -5830,7 +5863,7 @@ int ieee80211_mgd_deauth(struct ieee8021
  		ieee80211_destroy_assoc_data(sdata, false, true);
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -212,7 +212,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return 0;
  	}
  
-@@ -5837,7 +5870,7 @@ int ieee80211_mgd_deauth(struct ieee8021
+@@ -5845,7 +5878,7 @@ int ieee80211_mgd_deauth(struct ieee8021
  				       req->reason_code, tx, frame_buf);
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -221,7 +221,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return 0;
  	}
  
-@@ -5870,7 +5903,7 @@ int ieee80211_mgd_disassoc(struct ieee80
+@@ -5878,7 +5911,7 @@ int ieee80211_mgd_disassoc(struct ieee80
  			       frame_buf);
  
  	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,

package/kernel/mac80211/patches/subsys/302-cfg80211-Add-support-to-configure-SAE-PWE-value-to-d.patch

@@ -0,0 +1,74 @@
+From: Rohan Dutta <drohan@codeaurora.org>
+Date: Tue, 27 Oct 2020 12:09:10 +0200
+Subject: [PATCH] cfg80211: Add support to configure SAE PWE value to drivers
+
+Add support to configure SAE PWE preference from userspace to drivers in
+both AP and STA modes. This is needed for cases where the driver takes
+care of Authentication frame processing (SME in the driver) so that
+correct enforcement of the acceptable PWE derivation mechanism can be
+performed.
+
+The userspace applications can pass the sae_pwe value using the
+NL80211_ATTR_SAE_PWE attribute in the NL80211_CMD_CONNECT and
+NL80211_CMD_START_AP commands to the driver. This allows selection
+between the hunting-and-pecking loop and hash-to-element options for PWE
+derivation. For backwards compatibility, this new attribute is optional
+and if not included, the driver is notified of the value being
+unspecified.
+
+Signed-off-by: Rohan Dutta <drohan@codeaurora.org>
+Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
+Link: https://lore.kernel.org/r/20201027100910.22283-1-jouni@codeaurora.org
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/include/net/cfg80211.h
++++ b/include/net/cfg80211.h
+@@ -1009,6 +1009,14 @@ struct survey_info {
+  * @sae_pwd: password for SAE authentication (for devices supporting SAE
+  *	offload)
+  * @sae_pwd_len: length of SAE password (for devices supporting SAE offload)
++ * @sae_pwe: The mechanisms allowed for SAE PWE derivation
++ *	NL80211_SAE_PWE_UNSPECIFIED: Not-specified, used to indicate userspace
++ *		did not specify any preference. The driver should follow its
++ *		internal policy in such a scenario.
++ *	NL80211_SAE_PWE_HUNT_AND_PECK: Allow hunting-and-pecking loop only
++ *	NL80211_SAE_PWE_HASH_TO_ELEMENT: Allow hash-to-element only
++ *	NL80211_SAE_PWE_BOTH: Allow either hunting-and-pecking loop
++ *		or hash-to-element
+  */
+ struct cfg80211_crypto_settings {
+ 	u32 wpa_versions;
+@@ -1027,6 +1035,7 @@ struct cfg80211_crypto_settings {
+ 	const u8 *psk;
+ 	const u8 *sae_pwd;
+ 	u8 sae_pwd_len;
++	enum nl80211_sae_pwe_mechanism sae_pwe;
+ };
+ 
+ /**
+--- a/net/wireless/nl80211.c
++++ b/net/wireless/nl80211.c
+@@ -736,6 +736,9 @@ static const struct nla_policy nl80211_p
+ 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
+ 	[NL80211_ATTR_S1G_CAPABILITY_MASK] =
+ 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
++	[NL80211_ATTR_SAE_PWE] =
++		NLA_POLICY_RANGE(NLA_U8, NL80211_SAE_PWE_HUNT_AND_PECK,
++				 NL80211_SAE_PWE_BOTH),
+ 	[NL80211_ATTR_RECONNECT_REQUESTED] = { .type = NLA_REJECT },
+ };
+ 
+@@ -9764,6 +9767,12 @@ static int nl80211_crypto_settings(struc
+ 			nla_len(info->attrs[NL80211_ATTR_SAE_PASSWORD]);
+ 	}
+ 
++	if (info->attrs[NL80211_ATTR_SAE_PWE])
++		settings->sae_pwe =
++			nla_get_u8(info->attrs[NL80211_ATTR_SAE_PWE]);
++	else
++		settings->sae_pwe = NL80211_SAE_PWE_UNSPECIFIED;
++
+ 	return 0;
+ }
+ 

package/kernel/mac80211/patches/subsys/311-net-fq_impl-drop-get_default_func-move-default-flow-.patch

@@ -68,7 +68,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  static int fq_init(struct fq *fq, int flows_cnt)
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -857,7 +857,6 @@ enum txq_info_flags {
+@@ -846,7 +846,6 @@ enum txq_info_flags {
   */
  struct txq_info {
  	struct fq_tin tin;

package/kernel/mac80211/patches/subsys/315-mac80211-add-rx-decapsulation-offload-support.patch

@@ -132,7 +132,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  #endif /* __MAC80211_DRIVER_OPS */
 --- a/net/mac80211/iface.c
 +++ b/net/mac80211/iface.c
-@@ -839,7 +839,7 @@ static const struct net_device_ops ieee8
+@@ -835,7 +835,7 @@ static const struct net_device_ops ieee8
  
  };
  
@@ -141,7 +141,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  {
  	switch (iftype) {
  	/* P2P GO and client are mapped to AP/STATION types */
-@@ -859,7 +859,7 @@ static bool ieee80211_set_sdata_offload_
+@@ -855,7 +855,7 @@ static bool ieee80211_set_sdata_offload_
  	flags = sdata->vif.offload_flags;
  
  	if (ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) &&
@@ -150,7 +150,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		flags |= IEEE80211_OFFLOAD_ENCAP_ENABLED;
  
  		if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_FRAG) &&
-@@ -872,10 +872,21 @@ static bool ieee80211_set_sdata_offload_
+@@ -868,10 +868,21 @@ static bool ieee80211_set_sdata_offload_
  		flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED;
  	}
  
@@ -172,7 +172,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	return true;
  }
  
-@@ -893,7 +904,7 @@ static void ieee80211_set_vif_encap_ops(
+@@ -889,7 +900,7 @@ static void ieee80211_set_vif_encap_ops(
  	}
  
  	if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) ||
@@ -183,7 +183,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	enabled = bss->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_ENABLED;
 --- a/net/mac80211/rx.c
 +++ b/net/mac80211/rx.c
-@@ -4114,7 +4114,9 @@ void ieee80211_check_fast_rx(struct sta_
+@@ -4198,7 +4198,9 @@ void ieee80211_check_fast_rx(struct sta_
  		.vif_type = sdata->vif.type,
  		.control_port_protocol = sdata->control_port_protocol,
  	}, *old, *new = NULL;
@@ -193,7 +193,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  	/* use sparse to check that we don't return without updating */
  	__acquire(check_fast_rx);
-@@ -4227,6 +4229,17 @@ void ieee80211_check_fast_rx(struct sta_
+@@ -4311,6 +4313,17 @@ void ieee80211_check_fast_rx(struct sta_
  	if (assign)
  		new = kmemdup(&fastrx, sizeof(fastrx), GFP_KERNEL);
  
@@ -211,7 +211,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	spin_lock_bh(&sta->lock);
  	old = rcu_dereference_protected(sta->fast_rx, true);
  	rcu_assign_pointer(sta->fast_rx, new);
-@@ -4273,6 +4286,108 @@ void ieee80211_check_fast_rx_iface(struc
+@@ -4357,6 +4370,108 @@ void ieee80211_check_fast_rx_iface(struc
  	mutex_unlock(&local->sta_mtx);
  }
  
@@ -320,7 +320,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  static bool ieee80211_invoke_fast_rx(struct ieee80211_rx_data *rx,
  				     struct ieee80211_fast_rx *fast_rx)
  {
-@@ -4293,9 +4408,6 @@ static bool ieee80211_invoke_fast_rx(str
+@@ -4377,9 +4492,6 @@ static bool ieee80211_invoke_fast_rx(str
  	} addrs __aligned(2);
  	struct ieee80211_sta_rx_stats *stats = &sta->rx_stats;
  
@@ -330,7 +330,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	/* for parallel-rx, we need to have DUP_VALIDATED, otherwise we write
  	 * to a common data structure; drivers can implement that per queue
  	 * but we don't have that information in mac80211
-@@ -4369,32 +4481,6 @@ static bool ieee80211_invoke_fast_rx(str
+@@ -4453,32 +4565,6 @@ static bool ieee80211_invoke_fast_rx(str
  	    pskb_trim(skb, skb->len - fast_rx->icv_len))
  		goto drop;
  
@@ -363,7 +363,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (rx->key && !ieee80211_has_protected(hdr->frame_control))
  		goto drop;
  
-@@ -4406,12 +4492,6 @@ static bool ieee80211_invoke_fast_rx(str
+@@ -4490,12 +4576,6 @@ static bool ieee80211_invoke_fast_rx(str
  		return true;
  	}
  
@@ -376,7 +376,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	/* do the header conversion - first grab the addresses */
  	ether_addr_copy(addrs.da, skb->data + fast_rx->da_offs);
  	ether_addr_copy(addrs.sa, skb->data + fast_rx->sa_offs);
-@@ -4420,62 +4500,14 @@ static bool ieee80211_invoke_fast_rx(str
+@@ -4504,62 +4584,14 @@ static bool ieee80211_invoke_fast_rx(str
  	/* push the addresses in front */
  	memcpy(skb_push(skb, sizeof(addrs)), &addrs, sizeof(addrs));
  
@@ -443,7 +443,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	stats->dropped++;
  	return true;
  }
-@@ -4529,6 +4561,47 @@ static bool ieee80211_prepare_and_rx_han
+@@ -4613,6 +4645,47 @@ static bool ieee80211_prepare_and_rx_han
  	return true;
  }
  
@@ -491,7 +491,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  /*
   * This is the actual Rx frames handler. as it belongs to Rx path it must
   * be called with rcu_read_lock protection.
-@@ -4766,15 +4839,20 @@ void ieee80211_rx_list(struct ieee80211_
+@@ -4850,15 +4923,20 @@ void ieee80211_rx_list(struct ieee80211_
  	 * if it was previously present.
  	 * Also, frames with less than 16 bytes are dropped.
  	 */

package/kernel/mac80211/patches/subsys/316-mac80211-enable-QoS-support-for-nl80211-ctrl-port.patch

@@ -0,0 +1,116 @@
+From: Markus Theil <markus.theil@tu-ilmenau.de>
+Date: Sat, 6 Feb 2021 12:51:12 +0100
+Subject: [PATCH] mac80211: enable QoS support for nl80211 ctrl port
+
+This patch unifies sending control port frames
+over nl80211 and AF_PACKET sockets a little more.
+
+Before this patch, EAPOL frames got QoS prioritization
+only when using AF_PACKET sockets.
+
+__ieee80211_select_queue only selects a QoS-enabled queue
+for control port frames, when the control port protocol
+is set correctly on the skb. For the AF_PACKET path this
+works, but the nl80211 path used ETH_P_802_3.
+
+Another check for injected frames in wme.c then prevented
+the QoS TID to be copied in the frame.
+
+In order to fix this, get rid of the frame injection marking
+for nl80211 ctrl port and set the correct ethernet protocol.
+
+Please note:
+An erlier version of this path tried to prevent
+frame aggregation for control port frames in order to speed up
+the initial connection setup a little. This seemed to cause
+issues on my older Intel dvm-based hardware, and was therefore
+removed again. Future commits which try to reintroduce this
+have to check carefully how hw behaves with aggregated and
+non-aggregated traffic for the same TID.
+My NIC: Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
+
+Reported-by: kernel test robot <lkp@intel.com>
+Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
+Link: https://lore.kernel.org/r/20210206115112.567881-1-markus.theil@tu-ilmenau.de
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/mac80211/status.c
++++ b/net/mac80211/status.c
+@@ -628,16 +628,12 @@ static void ieee80211_report_ack_skb(str
+ 		u64 cookie = IEEE80211_SKB_CB(skb)->ack.cookie;
+ 		struct ieee80211_sub_if_data *sdata;
+ 		struct ieee80211_hdr *hdr = (void *)skb->data;
+-		__be16 ethertype = 0;
+-
+-		if (skb->len >= ETH_HLEN && skb->protocol == cpu_to_be16(ETH_P_802_3))
+-			skb_copy_bits(skb, 2 * ETH_ALEN, &ethertype, ETH_TLEN);
+ 
+ 		rcu_read_lock();
+ 		sdata = ieee80211_sdata_from_skb(local, skb);
+ 		if (sdata) {
+-			if (ethertype == sdata->control_port_protocol ||
+-			    ethertype == cpu_to_be16(ETH_P_PREAUTH))
++			if (skb->protocol == sdata->control_port_protocol ||
++			    skb->protocol == cpu_to_be16(ETH_P_PREAUTH))
+ 				cfg80211_control_port_tx_status(&sdata->wdev,
+ 								cookie,
+ 								skb->data,
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1195,9 +1195,7 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 			tx->sta = rcu_dereference(sdata->u.vlan.sta);
+ 			if (!tx->sta && sdata->wdev.use_4addr)
+ 				return TX_DROP;
+-		} else if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX |
+-					  IEEE80211_TX_CTL_INJECTED) ||
+-			   tx->sdata->control_port_protocol == tx->skb->protocol) {
++		} else if (tx->sdata->control_port_protocol == tx->skb->protocol) {
+ 			tx->sta = sta_info_get_bss(sdata, hdr->addr1);
+ 		}
+ 		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
+@@ -5421,6 +5419,7 @@ int ieee80211_tx_control_port(struct wip
+ {
+ 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ 	struct ieee80211_local *local = sdata->local;
++	struct sta_info *sta;
+ 	struct sk_buff *skb;
+ 	struct ethhdr *ehdr;
+ 	u32 ctrl_flags = 0;
+@@ -5443,8 +5442,7 @@ int ieee80211_tx_control_port(struct wip
+ 	if (cookie)
+ 		ctrl_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+ 
+-	flags |= IEEE80211_TX_INTFL_NL80211_FRAME_TX |
+-		 IEEE80211_TX_CTL_INJECTED;
++	flags |= IEEE80211_TX_INTFL_NL80211_FRAME_TX;
+ 
+ 	skb = dev_alloc_skb(local->hw.extra_tx_headroom +
+ 			    sizeof(struct ethhdr) + len);
+@@ -5461,10 +5459,25 @@ int ieee80211_tx_control_port(struct wip
+ 	ehdr->h_proto = proto;
+ 
+ 	skb->dev = dev;
+-	skb->protocol = htons(ETH_P_802_3);
++	skb->protocol = proto;
+ 	skb_reset_network_header(skb);
+ 	skb_reset_mac_header(skb);
+ 
++	/* update QoS header to prioritize control port frames if possible,
++	 * priorization also happens for control port frames send over
++	 * AF_PACKET
++	 */
++	rcu_read_lock();
++
++	if (ieee80211_lookup_ra_sta(sdata, skb, &sta) == 0 && !IS_ERR(sta)) {
++		u16 queue = __ieee80211_select_queue(sdata, sta, skb);
++
++		skb_set_queue_mapping(skb, queue);
++		skb_get_hash(skb);
++	}
++
++	rcu_read_unlock();
++
+ 	/* mutex lock is only needed for incrementing the cookie counter */
+ 	mutex_lock(&local->mtx);
+ 

package/kernel/mac80211/patches/subsys/353-mac80211-minstrel_ht-fix-MINSTREL_FRAC-macro.patch

@@ -0,0 +1,21 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 28 Apr 2021 21:03:13 +0200
+Subject: [PATCH] mac80211: minstrel_ht: fix MINSTREL_FRAC macro
+
+Add missing braces to avoid issues with e.g. using additions in the
+div expression
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/rc80211_minstrel_ht.h
++++ b/net/mac80211/rc80211_minstrel_ht.h
+@@ -14,7 +14,7 @@
+ 
+ /* scaled fraction values */
+ #define MINSTREL_SCALE  12
+-#define MINSTREL_FRAC(val, div) (((val) << MINSTREL_SCALE) / div)
++#define MINSTREL_FRAC(val, div) (((val) << MINSTREL_SCALE) / (div))
+ #define MINSTREL_TRUNC(val) ((val) >> MINSTREL_SCALE)
+ 
+ #define EWMA_LEVEL	96	/* ewma weighting factor [/EWMA_DIV] */

package/kernel/mac80211/patches/subsys/370-mac80211-fix-TXQ-AC-confusion.patch

@@ -1,61 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Tue, 23 Mar 2021 21:05:01 +0100
-Subject: [PATCH] mac80211: fix TXQ AC confusion
-
-Normally, TXQs have
-
-  txq->tid = tid;
-  txq->ac = ieee80211_ac_from_tid(tid);
-
-However, the special management TXQ actually has
-
-  txq->tid = IEEE80211_NUM_TIDS; // 16
-  txq->ac = IEEE80211_AC_VO;
-
-This makes sense, but ieee80211_ac_from_tid(16) is the same
-as ieee80211_ac_from_tid(0) which is just IEEE80211_AC_BE.
-
-Now, normally this is fine. However, if the netdev queues
-were stopped, then the code in ieee80211_tx_dequeue() will
-propagate the stop from the interface (vif->txqs_stopped[])
-if the AC 2 (ieee80211_ac_from_tid(txq->tid)) is marked as
-stopped. On wake, however, __ieee80211_wake_txqs() will wake
-the TXQ if AC 0 (txq->ac) is woken up.
-
-If a driver stops all queues with ieee80211_stop_tx_queues()
-and then wakes them again with ieee80211_wake_tx_queues(),
-the ieee80211_wake_txqs() tasklet will run to resync queue
-and TXQ state. If all queues were woken, then what'll happen
-is that _ieee80211_wake_txqs() will run in order of HW queues
-0-3, typically (and certainly for iwlwifi) corresponding to
-ACs 0-3, so it'll call __ieee80211_wake_txqs() for each AC in
-order 0-3.
-
-When __ieee80211_wake_txqs() is called for AC 0 (VO) that'll
-wake up the management TXQ (remember its tid is 16), and the
-driver's wake_tx_queue() will be called. That tries to get a
-frame, which will immediately *stop* the TXQ again, because
-now we check against AC 2, and AC 2 hasn't yet been marked as
-woken up again in sdata->vif.txqs_stopped[] since we're only
-in the __ieee80211_wake_txqs() call for AC 0.
-
-Thus, the management TXQ will never be started again.
-
-Fix this by checking txq->ac directly instead of calculating
-the AC as ieee80211_ac_from_tid(txq->tid).
-
-Fixes: adf8ed01e4fd ("mac80211: add an optional TXQ for other PS-buffered frames")
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/tx.c
-+++ b/net/mac80211/tx.c
-@@ -3589,7 +3589,7 @@ begin:
- 	    test_bit(IEEE80211_TXQ_STOP_NETIF_TX, &txqi->flags))
- 		goto out;
- 
--	if (vif->txqs_stopped[ieee80211_ac_from_tid(txq->tid)]) {
-+	if (vif->txqs_stopped[txq->ac]) {
- 		set_bit(IEEE80211_TXQ_STOP_NETIF_TX, &txqi->flags);
- 		goto out;
- 	}

package/kernel/mac80211/patches/subsys/371-mac80211-don-t-apply-flow-control-on-management-fram.patch

@@ -28,7 +28,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
   *
   * Transmit and frame generation functions.
   */
-@@ -1403,8 +1403,17 @@ static void ieee80211_txq_enqueue(struct
+@@ -1401,8 +1401,17 @@ static void ieee80211_txq_enqueue(struct
  	ieee80211_set_skb_enqueue_time(skb);
  
  	spin_lock_bh(&fq->lock);
@@ -48,7 +48,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	spin_unlock_bh(&fq->lock);
  }
  
-@@ -3846,6 +3855,9 @@ bool ieee80211_txq_airtime_check(struct
+@@ -3844,6 +3853,9 @@ bool ieee80211_txq_airtime_check(struct
  	if (!txq->sta)
  		return true;
  

package/kernel/mac80211/patches/subsys/372-mac80211-set-sk_pacing_shift-for-802.3-txpath.patch

@@ -9,7 +9,7 @@ Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
 
 --- a/net/mac80211/tx.c
 +++ b/net/mac80211/tx.c
-@@ -4173,6 +4173,9 @@ static bool ieee80211_tx_8023(struct iee
+@@ -4171,6 +4171,9 @@ static bool ieee80211_tx_8023(struct iee
  	unsigned long flags;
  	int q = info->hw_queue;
  

package/kernel/mac80211/patches/subsys/373-mac80211-support-Rx-timestamp-calculation-for-all-pr.patch

@@ -15,7 +15,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -1600,13 +1600,8 @@ ieee80211_have_rx_timestamp(struct ieee8
+@@ -1587,13 +1587,8 @@ ieee80211_have_rx_timestamp(struct ieee8
  {
  	WARN_ON_ONCE(status->flag & RX_FLAG_MACTIME_START &&
  		     status->flag & RX_FLAG_MACTIME_END);

package/kernel/mac80211/patches/subsys/374-mac80211-fix-time-is-after-bug-in-mlme.patch

@@ -1,31 +0,0 @@
-From: Ben Greear <greearb@candelatech.com>
-Date: Tue, 30 Mar 2021 16:07:49 -0700
-Subject: [PATCH] mac80211: fix time-is-after bug in mlme
-
-The incorrect timeout check caused probing to happen when it did
-not need to happen.  This in turn caused tx performance drop
-for around 5 seconds in ath10k-ct driver.  Possibly that tx drop
-is due to a secondary issue, but fixing the probe to not happen
-when traffic is running fixes the symptom.
-
-Signed-off-by: Ben Greear <greearb@candelatech.com>
-Fixes: 9abf4e49830d ("mac80211: optimize station connection monitor")
-Acked-by: Felix Fietkau <nbd@nbd.name>
-Link: https://lore.kernel.org/r/20210330230749.14097-1-greearb@candelatech.com
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/mlme.c
-+++ b/net/mac80211/mlme.c
-@@ -4691,7 +4691,10 @@ static void ieee80211_sta_conn_mon_timer
- 		timeout = sta->rx_stats.last_rx;
- 	timeout += IEEE80211_CONNECTION_IDLE_TIME;
- 
--	if (time_is_before_jiffies(timeout)) {
-+	/* If timeout is after now, then update timer to fire at
-+	 * the later date, but do not actually probe at this time.
-+	 */
-+	if (time_is_after_jiffies(timeout)) {
- 		mod_timer(&ifmgd->conn_mon_timer, round_jiffies_up(timeout));
- 		return;
- 	}

package/kernel/mac80211/patches/subsys/374-mac80211-move-A-MPDU-session-check-from-minstrel_ht-.patch

@@ -0,0 +1,126 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 17 Jun 2021 17:56:54 +0200
+Subject: [PATCH] mac80211: move A-MPDU session check from minstrel_ht to
+ mac80211
+
+This avoids calling back into tx handlers from within the rate control module.
+Preparation for deferring rate control until tx dequeue
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/include/net/mac80211.h
++++ b/include/net/mac80211.h
+@@ -6160,6 +6160,11 @@ enum rate_control_capabilities {
+ 	 * otherwise the NSS difference doesn't bother us.
+ 	 */
+ 	RATE_CTRL_CAPA_VHT_EXT_NSS_BW = BIT(0),
++	/**
++	 * @RATE_CTRL_CAPA_AMPDU_TRIGGER:
++	 * mac80211 should start A-MPDU sessions on tx
++	 */
++	RATE_CTRL_CAPA_AMPDU_TRIGGER = BIT(1),
+ };
+ 
+ struct rate_control_ops {
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -1153,29 +1153,6 @@ minstrel_downgrade_prob_rate(struct mins
+ }
+ 
+ static void
+-minstrel_aggr_check(struct ieee80211_sta *pubsta, struct sk_buff *skb)
+-{
+-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+-	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
+-	u16 tid;
+-
+-	if (skb_get_queue_mapping(skb) == IEEE80211_AC_VO)
+-		return;
+-
+-	if (unlikely(!ieee80211_is_data_qos(hdr->frame_control)))
+-		return;
+-
+-	if (unlikely(skb->protocol == cpu_to_be16(ETH_P_PAE)))
+-		return;
+-
+-	tid = ieee80211_get_tid(hdr);
+-	if (likely(sta->ampdu_mlme.tid_tx[tid]))
+-		return;
+-
+-	ieee80211_start_tx_ba_session(pubsta, tid, 0);
+-}
+-
+-static void
+ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband,
+                       void *priv_sta, struct ieee80211_tx_status *st)
+ {
+@@ -1477,10 +1454,6 @@ minstrel_ht_get_rate(void *priv, struct
+ 	struct minstrel_priv *mp = priv;
+ 	u16 sample_idx;
+ 
+-	if (!(info->flags & IEEE80211_TX_CTL_AMPDU) &&
+-	    !minstrel_ht_is_legacy_group(MI_RATE_GROUP(mi->max_prob_rate)))
+-		minstrel_aggr_check(sta, txrc->skb);
+-
+ 	info->flags |= mi->tx_flags;
+ 
+ #ifdef CPTCFG_MAC80211_DEBUGFS
+@@ -1894,6 +1867,7 @@ static u32 minstrel_ht_get_expected_thro
+ 
+ static const struct rate_control_ops mac80211_minstrel_ht = {
+ 	.name = "minstrel_ht",
++	.capa = RATE_CTRL_CAPA_AMPDU_TRIGGER,
+ 	.tx_status_ext = minstrel_ht_tx_status,
+ 	.get_rate = minstrel_ht_get_rate,
+ 	.rate_init = minstrel_ht_rate_init,
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -3931,6 +3931,29 @@ void ieee80211_txq_schedule_start(struct
+ }
+ EXPORT_SYMBOL(ieee80211_txq_schedule_start);
+ 
++static void
++ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
++		     struct sta_info *sta,
++		     struct sk_buff *skb)
++{
++	struct rate_control_ref *ref = sdata->local->rate_ctrl;
++	u16 tid;
++
++	if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER))
++		return;
++
++	if (!sta || !sta->sta.ht_cap.ht_supported ||
++	    !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO ||
++	    skb->protocol == sdata->control_port_protocol)
++		return;
++
++	tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
++	if (likely(sta->ampdu_mlme.tid_tx[tid]))
++		return;
++
++	ieee80211_start_tx_ba_session(&sta->sta, tid, 0);
++}
++
+ void __ieee80211_subif_start_xmit(struct sk_buff *skb,
+ 				  struct net_device *dev,
+ 				  u32 info_flags,
+@@ -3961,6 +3984,8 @@ void __ieee80211_subif_start_xmit(struct
+ 		skb_get_hash(skb);
+ 	}
+ 
++	ieee80211_aggr_check(sdata, sta, skb);
++
+ 	if (sta) {
+ 		struct ieee80211_fast_tx *fast_tx;
+ 
+@@ -4224,6 +4249,8 @@ static void ieee80211_8023_xmit(struct i
+ 
+ 	memset(info, 0, sizeof(*info));
+ 
++	ieee80211_aggr_check(sdata, sta, skb);
++
+ 	tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+ 	tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
+ 	if (tid_tx) {

package/kernel/mac80211/patches/subsys/375-mac80211-call-ieee80211_tx_h_rate_ctrl-when-dequeue.patch

@@ -0,0 +1,114 @@
+From: Ryder Lee <ryder.lee@mediatek.com>
+Date: Fri, 28 May 2021 14:05:41 +0800
+Subject: [PATCH] mac80211: call ieee80211_tx_h_rate_ctrl() when dequeue
+
+Make ieee80211_tx_h_rate_ctrl() get called on dequeue to improve
+performance since it reduces the turnaround time for rate control.
+
+Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
+---
+
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1778,8 +1778,6 @@ static int invoke_tx_handlers_early(stru
+ 	CALL_TXH(ieee80211_tx_h_ps_buf);
+ 	CALL_TXH(ieee80211_tx_h_check_control_port_protocol);
+ 	CALL_TXH(ieee80211_tx_h_select_key);
+-	if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL))
+-		CALL_TXH(ieee80211_tx_h_rate_ctrl);
+ 
+  txh_done:
+ 	if (unlikely(res == TX_DROP)) {
+@@ -1812,6 +1810,9 @@ static int invoke_tx_handlers_late(struc
+ 		goto txh_done;
+ 	}
+ 
++	if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL))
++		CALL_TXH(ieee80211_tx_h_rate_ctrl);
++
+ 	CALL_TXH(ieee80211_tx_h_michael_mic_add);
+ 	CALL_TXH(ieee80211_tx_h_sequence);
+ 	CALL_TXH(ieee80211_tx_h_fragment);
+@@ -3382,15 +3383,21 @@ out:
+  * Can be called while the sta lock is held. Anything that can cause packets to
+  * be generated will cause deadlock!
+  */
+-static void ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata,
+-				       struct sta_info *sta, u8 pn_offs,
+-				       struct ieee80211_key *key,
+-				       struct sk_buff *skb)
++static ieee80211_tx_result
++ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata,
++			   struct sta_info *sta, u8 pn_offs,
++			   struct ieee80211_key *key,
++			   struct ieee80211_tx_data *tx)
+ {
++	struct sk_buff *skb = tx->skb;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ 	struct ieee80211_hdr *hdr = (void *)skb->data;
+ 	u8 tid = IEEE80211_NUM_TIDS;
+ 
++	if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL) &&
++	    ieee80211_tx_h_rate_ctrl(tx) != TX_CONTINUE)
++		return TX_DROP;
++
+ 	if (key)
+ 		info->control.hw_key = &key->conf;
+ 
+@@ -3439,6 +3446,8 @@ static void ieee80211_xmit_fast_finish(s
+ 			break;
+ 		}
+ 	}
++
++	return TX_CONTINUE;
+ }
+ 
+ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
+@@ -3542,24 +3551,17 @@ static bool ieee80211_xmit_fast(struct i
+ 	tx.sta = sta;
+ 	tx.key = fast_tx->key;
+ 
+-	if (!ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) {
+-		tx.skb = skb;
+-		r = ieee80211_tx_h_rate_ctrl(&tx);
+-		skb = tx.skb;
+-		tx.skb = NULL;
+-
+-		if (r != TX_CONTINUE) {
+-			if (r != TX_QUEUED)
+-				kfree_skb(skb);
+-			return true;
+-		}
+-	}
+-
+ 	if (ieee80211_queue_skb(local, sdata, sta, skb))
+ 		return true;
+ 
+-	ieee80211_xmit_fast_finish(sdata, sta, fast_tx->pn_offs,
+-				   fast_tx->key, skb);
++	tx.skb = skb;
++	r = ieee80211_xmit_fast_finish(sdata, sta, fast_tx->pn_offs,
++				       fast_tx->key, &tx);
++	tx.skb = NULL;
++	if (r == TX_DROP) {
++		kfree_skb(skb);
++		return true;
++	}
+ 
+ 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ 		sdata = container_of(sdata->bss,
+@@ -3670,8 +3672,12 @@ begin:
+ 		    (tx.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+ 			pn_offs = ieee80211_hdrlen(hdr->frame_control);
+ 
+-		ieee80211_xmit_fast_finish(sta->sdata, sta, pn_offs,
+-					   tx.key, skb);
++		r = ieee80211_xmit_fast_finish(sta->sdata, sta, pn_offs,
++					       tx.key, &tx);
++		if (r != TX_CONTINUE) {
++			ieee80211_free_txskb(&local->hw, skb);
++			goto begin;
++		}
+ 	} else {
+ 		if (invoke_tx_handlers_late(&tx))
+ 			goto begin;

package/kernel/mac80211/patches/subsys/376-mac80211-add-rate-control-support-for-encap-offload.patch

@@ -0,0 +1,119 @@
+From: Ryder Lee <ryder.lee@mediatek.com>
+Date: Fri, 28 May 2021 14:05:43 +0800
+Subject: [PATCH] mac80211: add rate control support for encap offload
+
+The software rate control cannot deal with encap offload, so fix it.
+
+Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
+---
+
+--- a/net/mac80211/ieee80211_i.h
++++ b/net/mac80211/ieee80211_i.h
+@@ -2024,6 +2024,15 @@ static inline void ieee80211_tx_skb(stru
+ 	ieee80211_tx_skb_tid(sdata, skb, 7);
+ }
+ 
++static inline bool ieee80211_is_tx_data(struct sk_buff *skb)
++{
++	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
++	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
++
++	return info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP ||
++	       ieee80211_is_data(hdr->frame_control);
++}
++
+ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
+ 			       struct ieee802_11_elems *elems,
+ 			       u64 filter, u32 crc, u8 *transmitter_bssid,
+--- a/net/mac80211/rate.c
++++ b/net/mac80211/rate.c
+@@ -297,15 +297,11 @@ void ieee80211_check_rate_mask(struct ie
+ static bool rc_no_data_or_no_ack_use_min(struct ieee80211_tx_rate_control *txrc)
+ {
+ 	struct sk_buff *skb = txrc->skb;
+-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+-	__le16 fc;
+-
+-	fc = hdr->frame_control;
+ 
+ 	return (info->flags & (IEEE80211_TX_CTL_NO_ACK |
+ 			       IEEE80211_TX_CTL_USE_MINRATE)) ||
+-		!ieee80211_is_data(fc);
++		!ieee80211_is_tx_data(skb);
+ }
+ 
+ static void rc_send_low_basicrate(struct ieee80211_tx_rate *rate,
+@@ -870,7 +866,6 @@ void ieee80211_get_tx_rates(struct ieee8
+ 			    int max_rates)
+ {
+ 	struct ieee80211_sub_if_data *sdata;
+-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ 	struct ieee80211_supported_band *sband;
+ 
+@@ -882,7 +877,7 @@ void ieee80211_get_tx_rates(struct ieee8
+ 	sdata = vif_to_sdata(vif);
+ 	sband = sdata->local->hw.wiphy->bands[info->band];
+ 
+-	if (ieee80211_is_data(hdr->frame_control))
++	if (ieee80211_is_tx_data(skb))
+ 		rate_control_apply_mask(sdata, sta, sband, dest, max_rates);
+ 
+ 	if (dest[0].idx < 0)
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -679,6 +679,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 	u32 len;
+ 	struct ieee80211_tx_rate_control txrc;
+ 	struct ieee80211_sta_rates *ratetbl = NULL;
++	bool encap = info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP;
+ 	bool assoc = false;
+ 
+ 	memset(&txrc, 0, sizeof(txrc));
+@@ -720,7 +721,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 	 * just wants a probe response.
+ 	 */
+ 	if (tx->sdata->vif.bss_conf.use_short_preamble &&
+-	    (ieee80211_is_data(hdr->frame_control) ||
++	    (ieee80211_is_tx_data(tx->skb) ||
+ 	     (tx->sta && test_sta_flag(tx->sta, WLAN_STA_SHORT_PREAMBLE))))
+ 		txrc.short_preamble = true;
+ 
+@@ -742,7 +743,8 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 		 "%s: Dropped data frame as no usable bitrate found while "
+ 		 "scanning and associated. Target station: "
+ 		 "%pM on %d GHz band\n",
+-		 tx->sdata->name, hdr->addr1,
++		 tx->sdata->name,
++		 encap ? ((struct ethhdr *)hdr)->h_dest : hdr->addr1,
+ 		 info->band ? 5 : 2))
+ 		return TX_DROP;
+ 
+@@ -776,7 +778,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 
+ 	if (txrc.reported_rate.idx < 0) {
+ 		txrc.reported_rate = tx->rate;
+-		if (tx->sta && ieee80211_is_data(hdr->frame_control))
++		if (tx->sta && ieee80211_is_tx_data(tx->skb))
+ 			tx->sta->tx_stats.last_rate = txrc.reported_rate;
+ 	} else if (tx->sta)
+ 		tx->sta->tx_stats.last_rate = txrc.reported_rate;
+@@ -3660,8 +3662,16 @@ begin:
+ 	else
+ 		info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+ 
+-	if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP)
++	if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) {
++		if (!ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) {
++			r = ieee80211_tx_h_rate_ctrl(&tx);
++			if (r != TX_CONTINUE) {
++				ieee80211_free_txskb(&local->hw, skb);
++				goto begin;
++			}
++		}
+ 		goto encap_out;
++	}
+ 
+ 	if (info->control.flags & IEEE80211_TX_CTRL_FAST_XMIT) {
+ 		struct sta_info *sta = container_of(txq->sta, struct sta_info,

package/kernel/mac80211/patches/subsys/377-mac80211-minstrel_ht-fix-sample-time-check.patch

@@ -0,0 +1,23 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 17 Jun 2021 12:05:54 +0200
+Subject: [PATCH] mac80211: minstrel_ht: fix sample time check
+
+We need to skip sampling if the next sample time is after jiffies, not before.
+This patch fixes an issue where in some cases only very little sampling (or none
+at all) is performed, leading to really bad data rates
+
+Fixes: 80d55154b2f8 ("mac80211: minstrel_ht: significantly redesign the rate probing strategy")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -1466,7 +1466,7 @@ minstrel_ht_get_rate(void *priv, struct
+ 	    (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO))
+ 		return;
+ 
+-	if (time_is_before_jiffies(mi->sample_time))
++	if (time_is_after_jiffies(mi->sample_time))
+ 		return;
+ 
+ 	mi->sample_time = jiffies + MINSTREL_SAMPLE_INTERVAL;

package/kernel/mac80211/patches/subsys/378-mac80211-remove-iwlwifi-specific-workaround-that-bro.patch

@@ -0,0 +1,51 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 19 Jun 2021 12:10:14 +0200
+Subject: [PATCH] mac80211: remove iwlwifi specific workaround that broke sta
+ NDP tx
+
+Sending nulldata packets is important for sw AP link probing and detecting
+4-address mode links. The checks that dropped these packets were apparently
+added to work around an iwlwifi firmware bug with multi-TID aggregation.
+
+Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
+Cc: stable@vger.kernel.org
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
++++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+@@ -1085,6 +1085,9 @@ static int iwl_mvm_tx_mpdu(struct iwl_mv
+ 	if (WARN_ON_ONCE(mvmsta->sta_id == IWL_MVM_INVALID_STA))
+ 		return -1;
+ 
++	if (unlikely(ieee80211_is_any_nullfunc(fc)) && sta->he_cap.has_he)
++		return -1;
++
+ 	if (unlikely(ieee80211_is_probe_resp(fc)))
+ 		iwl_mvm_probe_resp_set_noa(mvm, skb);
+ 
+--- a/net/mac80211/mlme.c
++++ b/net/mac80211/mlme.c
+@@ -1094,11 +1094,6 @@ void ieee80211_send_nullfunc(struct ieee
+ 	struct ieee80211_hdr_3addr *nullfunc;
+ 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ 
+-	/* Don't send NDPs when STA is connected HE */
+-	if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+-	    !(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
+-		return;
+-
+ 	skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif,
+ 		!ieee80211_hw_check(&local->hw, DOESNT_SUPPORT_QOS_NDP));
+ 	if (!skb)
+@@ -1130,10 +1125,6 @@ static void ieee80211_send_4addr_nullfun
+ 	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+ 		return;
+ 
+-	/* Don't send NDPs when connected HE */
+-	if (!(sdata->u.mgd.flags & IEEE80211_STA_DISABLE_HE))
+-		return;
+-
+ 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
+ 	if (!skb)
+ 		return;

package/kernel/mac80211/patches/subsys/379-mac80211-fix-starting-aggregation-sessions-on-mesh-i.patch

@@ -0,0 +1,112 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 29 Jun 2021 13:25:09 +0200
+Subject: [PATCH] mac80211: fix starting aggregation sessions on mesh
+ interfaces
+
+The logic for starting aggregation sessions was recently moved from minstrel_ht
+to mac80211, into the subif tx handler just after the sta lookup.
+Unfortunately this didn't work for mesh interfaces, since the sta lookup is
+deferred until a much later point in time on those.
+Fix this by also calling the aggregation check right after the deferred sta
+lookup.
+
+Fixes: 08a46c642001 ("mac80211: move A-MPDU session check from minstrel_ht to mac80211")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1159,6 +1159,29 @@ static bool ieee80211_tx_prep_agg(struct
+ 	return queued;
+ }
+ 
++static void
++ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
++		     struct sta_info *sta,
++		     struct sk_buff *skb)
++{
++	struct rate_control_ref *ref = sdata->local->rate_ctrl;
++	u16 tid;
++
++	if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER))
++		return;
++
++	if (!sta || !sta->sta.ht_cap.ht_supported ||
++	    !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO ||
++	    skb->protocol == sdata->control_port_protocol)
++		return;
++
++	tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
++	if (likely(sta->ampdu_mlme.tid_tx[tid]))
++		return;
++
++	ieee80211_start_tx_ba_session(&sta->sta, tid, 0);
++}
++
+ /*
+  * initialises @tx
+  * pass %NULL for the station if unknown, a valid pointer if known
+@@ -1172,6 +1195,7 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 	struct ieee80211_local *local = sdata->local;
+ 	struct ieee80211_hdr *hdr;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
++	bool aggr_check = false;
+ 	int tid;
+ 
+ 	memset(tx, 0, sizeof(*tx));
+@@ -1200,8 +1224,10 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 		} else if (tx->sdata->control_port_protocol == tx->skb->protocol) {
+ 			tx->sta = sta_info_get_bss(sdata, hdr->addr1);
+ 		}
+-		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
++		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1)) {
+ 			tx->sta = sta_info_get(sdata, hdr->addr1);
++			aggr_check = true;
++		}
+ 	}
+ 
+ 	if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) &&
+@@ -1211,8 +1237,12 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 		struct tid_ampdu_tx *tid_tx;
+ 
+ 		tid = ieee80211_get_tid(hdr);
+-
+ 		tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]);
++		if (!tid_tx && aggr_check) {
++			ieee80211_aggr_check(sdata, tx->sta, skb);
++			tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]);
++		}
++
+ 		if (tid_tx) {
+ 			bool queued;
+ 
+@@ -3947,29 +3977,6 @@ void ieee80211_txq_schedule_start(struct
+ }
+ EXPORT_SYMBOL(ieee80211_txq_schedule_start);
+ 
+-static void
+-ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
+-		     struct sta_info *sta,
+-		     struct sk_buff *skb)
+-{
+-	struct rate_control_ref *ref = sdata->local->rate_ctrl;
+-	u16 tid;
+-
+-	if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER))
+-		return;
+-
+-	if (!sta || !sta->sta.ht_cap.ht_supported ||
+-	    !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO ||
+-	    skb->protocol == sdata->control_port_protocol)
+-		return;
+-
+-	tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
+-	if (likely(sta->ampdu_mlme.tid_tx[tid]))
+-		return;
+-
+-	ieee80211_start_tx_ba_session(&sta->sta, tid, 0);
+-}
+-
+ void __ieee80211_subif_start_xmit(struct sk_buff *skb,
+ 				  struct net_device *dev,
+ 				  u32 info_flags,

package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch

@@ -1,6 +1,6 @@
 --- a/include/net/cfg80211.h
 +++ b/include/net/cfg80211.h
-@@ -3736,6 +3736,7 @@ struct mgmt_frame_regs {
+@@ -3745,6 +3745,7 @@ struct mgmt_frame_regs {
   *	(as advertised by the nl80211 feature flag.)
   * @get_tx_power: store the current TX power into the dbm variable;
   *	return 0 if successful
@@ -8,7 +8,7 @@
   *
   * @set_wds_peer: set the WDS peer for a WDS interface
   *
-@@ -4058,6 +4059,7 @@ struct cfg80211_ops {
+@@ -4067,6 +4068,7 @@ struct cfg80211_ops {
  				enum nl80211_tx_power_setting type, int mbm);
  	int	(*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
  				int *dbm);
@@ -36,7 +36,7 @@
  	u8 ps_dtim_period;
 --- a/include/uapi/linux/nl80211.h
 +++ b/include/uapi/linux/nl80211.h
-@@ -2531,6 +2531,9 @@ enum nl80211_commands {
+@@ -2560,6 +2560,9 @@ enum nl80211_commands {
   *	disassoc events to indicate that an immediate reconnect to the AP
   *	is desired.
   *
@@ -46,9 +46,9 @@
   * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -3022,6 +3025,8 @@ enum nl80211_attrs {
+@@ -3057,6 +3060,8 @@ enum nl80211_attrs {
  
- 	NL80211_ATTR_RECONNECT_REQUESTED,
+ 	NL80211_ATTR_DISABLE_HE,
  
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 +
@@ -57,7 +57,7 @@
  	__NL80211_ATTR_AFTER_LAST,
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -2707,6 +2707,19 @@ static int ieee80211_get_tx_power(struct
+@@ -2709,6 +2709,19 @@ static int ieee80211_get_tx_power(struct
  	return 0;
  }
  
@@ -77,7 +77,7 @@
  static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
  				  const u8 *addr)
  {
-@@ -4137,6 +4150,7 @@ const struct cfg80211_ops mac80211_confi
+@@ -4139,6 +4152,7 @@ const struct cfg80211_ops mac80211_confi
  	.set_wiphy_params = ieee80211_set_wiphy_params,
  	.set_tx_power = ieee80211_set_tx_power,
  	.get_tx_power = ieee80211_get_tx_power,
@@ -87,7 +87,7 @@
  	CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -1403,6 +1403,7 @@ struct ieee80211_local {
+@@ -1390,6 +1390,7 @@ struct ieee80211_local {
  	int dynamic_ps_forced_timeout;
  
  	int user_power_level; /* in dBm, for all interfaces */
@@ -129,15 +129,15 @@
  	local->hw.max_mtu = IEEE80211_MAX_DATA_LEN;
 --- a/net/wireless/nl80211.c
 +++ b/net/wireless/nl80211.c
-@@ -733,6 +733,7 @@ static const struct nla_policy nl80211_p
- 	[NL80211_ATTR_S1G_CAPABILITY_MASK] =
- 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
+@@ -740,6 +740,7 @@ static const struct nla_policy nl80211_p
+ 		NLA_POLICY_RANGE(NLA_U8, NL80211_SAE_PWE_HUNT_AND_PECK,
+ 				 NL80211_SAE_PWE_BOTH),
  	[NL80211_ATTR_RECONNECT_REQUESTED] = { .type = NLA_REJECT },
 +	[NL80211_ATTR_WIPHY_ANTENNA_GAIN] = { .type = NLA_U32 },
  };
  
  /* policy for the key attributes */
-@@ -3241,6 +3242,20 @@ static int nl80211_set_wiphy(struct sk_b
+@@ -3248,6 +3249,20 @@ static int nl80211_set_wiphy(struct sk_b
  		if (result)
  			return result;
  	}

package/kernel/mt76/Makefile

@@ -8,9 +8,9 @@ PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/openwrt/mt76
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-04-11
-PKG_SOURCE_VERSION:=bf45b30d891961dd7c4139dddb58b909ea2c2b5a
-PKG_MIRROR_HASH:=431cecf80dafa986e805f809522721c2bb26289867d6770695d49baf8b471bea
+PKG_SOURCE_DATE:=2021-06-06
+PKG_SOURCE_VERSION:=22b690334c0f49b11534cc2e331c9d5e17c4a0bc
+PKG_MIRROR_HASH:=ff5e563935919d2e40c1e7254ef3bc06f7ecc5e69f8ddd12903e8f5de942d630
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_BUILD_PARALLEL:=1
@@ -155,7 +155,7 @@ define KernelPackage/mt7615-common
   $(KernelPackage/mt76-default)
   TITLE:=MediaTek MT7615 wireless driver common code
   HIDDEN:=1
-  DEPENDS+=@PCI_SUPPORT +kmod-mt76-core +kmod-mt76-connac
+  DEPENDS+=@PCI_SUPPORT +kmod-mt76-core +kmod-mt76-connac +kmod-hwmon-core
   FILES:= $(PKG_BUILD_DIR)/mt7615/mt7615-common.ko
 endef
 
@@ -213,7 +213,7 @@ endef
 define KernelPackage/mt7915e
   $(KernelPackage/mt76-default)
   TITLE:=MediaTek MT7915e wireless driver
-  DEPENDS+=@PCI_SUPPORT +kmod-mt7615-common +@DRIVER_11AX_SUPPORT
+  DEPENDS+=@PCI_SUPPORT +kmod-mt7615-common +kmod-hwmon-core +kmod-thermal +@DRIVER_11AX_SUPPORT
   FILES:= $(PKG_BUILD_DIR)/mt7915/mt7915e.ko
   AUTOLOAD:=$(call AutoProbe,mt7915e)
 endef

package/libs/libjson-c/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=json-c
 PKG_VERSION:=0.15
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-nodoc.tar.gz
 PKG_SOURCE_URL:=https://s3.amazonaws.com/json-c_releases/releases/

package/libs/libnl-tiny/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libnl-tiny
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/libnl-tiny.git

package/libs/libubox/Makefile

@@ -1,13 +1,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libubox
-PKG_RELEASE=1
+PKG_RELEASE=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/libubox.git
-PKG_MIRROR_HASH:=97dc4eba01cf2c5d6a6d0db3747e0cdc0d95cb87e51b3115272e7d3e69a8b255
-PKG_SOURCE_DATE:=2020-12-12
-PKG_SOURCE_VERSION:=357877693ca363b12e6e7e14d345639b2440cd07
+PKG_MIRROR_HASH:=7dd1db1e0074a9c7c722db654cce3111b3bd3cff0bfd791c4497cb0f6c22d3ca
+PKG_SOURCE_DATE:=2021-05-16
+PKG_SOURCE_VERSION:=b14c4688612c05c78ce984d7bde633bce8703b1e
 PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
 CMAKE_INSTALL:=1
 

package/libs/libusb/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libusb
 PKG_VERSION:=1.0.24
-PKG_RELEASE:=1
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=\

package/libs/libusb/patches/001-Correct-a-typo-in-the-Changelog-and-clean-up-a-stray.patch

@@ -0,0 +1,29 @@
+From 369af149e3ad92514a2d24f112cedfeb7acaf558 Mon Sep 17 00:00:00 2001
+From: Chris Dickens <christopher.a.dickens@gmail.com>
+Date: Sun, 13 Dec 2020 15:46:27 -0800
+Subject: [PATCH] Correct a typo in the Changelog and clean up a stray file
+
+Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
+---
+ ChangeLog             | 2 +-
+ libusb/version_nano.h | 2 +-
+ test                  | 0
+ 3 files changed, 2 insertions(+), 2 deletions(-)
+ delete mode 100644 test
+
+--- a/ChangeLog
++++ b/ChangeLog
+@@ -12,7 +12,7 @@ visit: http://log.libusb.info
+ * Darwin (macOS): use IOUSBDevice as darwin_device_class explicitly (#693)
+ * Linux: Drop support for kernel older than 2.6.32
+ * Linux: Provide an event thread name (#689)
+-* Linux: Wait until all USBs have been reaped before freeing them (#607)
++* Linux: Wait until all URBs have been reaped before freeing them (#607)
+ * NetBSD: Recognize device timeouts (#710)
+ * OpenBSD: Allow opening ugen devices multiple times (#763)
+ * OpenBSD: Support libusb_get_port_number() (#764)
+--- a/libusb/version_nano.h
++++ b/libusb/version_nano.h
+@@ -1 +1 @@
+-#define LIBUSB_NANO 11584
++#define LIBUSB_NANO 11585

package/libs/libusb/patches/002-linux_usbfs-Fix-parsing-of-descriptors-for-multi-con.patch

@@ -0,0 +1,61 @@
+From f6d2cb561402c3b6d3627c0eb89e009b503d9067 Mon Sep 17 00:00:00 2001
+From: Chris Dickens <christopher.a.dickens@gmail.com>
+Date: Sun, 13 Dec 2020 15:49:19 -0800
+Subject: [PATCH] linux_usbfs: Fix parsing of descriptors for
+ multi-configuration devices
+
+Commit e2be556bd2 ("linux_usbfs: Parse config descriptors during device
+initialization") introduced a regression for devices with multiple
+configurations. The logic that verifies the reported length of the
+configuration descriptors failed to count the length of the
+configuration descriptor itself and would truncate the actual length by
+9 bytes, leading to a parsing error for subsequent descriptors.
+
+Closes #825
+
+Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
+---
+ libusb/os/linux_usbfs.c | 12 ++++++++----
+ libusb/version_nano.h   |  2 +-
+ 2 files changed, 9 insertions(+), 5 deletions(-)
+
+--- a/libusb/os/linux_usbfs.c
++++ b/libusb/os/linux_usbfs.c
+@@ -641,7 +641,12 @@ static int seek_to_next_config(struct li
+ 	uint8_t *buffer, size_t len)
+ {
+ 	struct usbi_descriptor_header *header;
+-	int offset = 0;
++	int offset;
++
++	/* Start seeking past the config descriptor */
++	offset = LIBUSB_DT_CONFIG_SIZE;
++	buffer += LIBUSB_DT_CONFIG_SIZE;
++	len -= LIBUSB_DT_CONFIG_SIZE;
+ 
+ 	while (len > 0) {
+ 		if (len < 2) {
+@@ -718,7 +723,7 @@ static int parse_config_descriptors(stru
+ 		}
+ 
+ 		if (priv->sysfs_dir) {
+-			 /*
++			/*
+ 			 * In sysfs wTotalLength is ignored, instead the kernel returns a
+ 			 * config descriptor with verified bLength fields, with descriptors
+ 			 * with an invalid bLength removed.
+@@ -727,8 +732,7 @@ static int parse_config_descriptors(stru
+ 			int offset;
+ 
+ 			if (num_configs > 1 && idx < num_configs - 1) {
+-				offset = seek_to_next_config(ctx, buffer + LIBUSB_DT_CONFIG_SIZE,
+-							     remaining - LIBUSB_DT_CONFIG_SIZE);
++				offset = seek_to_next_config(ctx, buffer, remaining);
+ 				if (offset < 0)
+ 					return offset;
+ 				sysfs_config_len = (uint16_t)offset;
+--- a/libusb/version_nano.h
++++ b/libusb/version_nano.h
+@@ -1 +1 @@
+-#define LIBUSB_NANO 11585
++#define LIBUSB_NANO 11586

package/libs/uclient/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/uclient.git
-PKG_MIRROR_HASH:=532016a283722f21dd450e388060af0db765972956eee288c7cabf102c8303d0
-PKG_SOURCE_DATE:=2020-12-10
-PKG_SOURCE_VERSION:=2c843b2bc04c34403d9a6b4de025447e4b5d8aa4
+PKG_MIRROR_HASH:=7c443cac02a734dd312c65618f4de17248d188317f30a9fac192c1503b3d5c05
+PKG_SOURCE_DATE:=2021-05-14
+PKG_SOURCE_VERSION:=6a6011df3429ffa5958d12b1327eeda4fd9daa47
 CMAKE_INSTALL:=1
 
 PKG_BUILD_DEPENDS:=ustream-ssl

package/libs/wolfssl/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wolfssl
 PKG_VERSION:=4.7.0-stable
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://github.com/wolfSSL/wolfssl/archive/v$(PKG_VERSION)

package/libs/wolfssl/patches/200-ecc-rng.patch

@@ -0,0 +1,50 @@
+Since commit 6467de5a8840 ("Randomize z ordinates in scalar
+mult when timing resistant") wolfssl requires a RNG for an EC
+key when the hardened built option is selected.
+
+wc_ecc_set_rng is only available when built hardened, so there
+is no safe way to install the RNG to the key regardless whether
+or not wolfssl is compiled hardened.
+
+Always export wc_ecc_set_rng so tools such as hostapd can install
+RNG regardless of the built settings for wolfssl.
+
+--- a/wolfcrypt/src/ecc.c
++++ b/wolfcrypt/src/ecc.c
+@@ -10293,21 +10293,21 @@ void wc_ecc_fp_free(void)
+ 
+ #endif /* FP_ECC */
+ 
+-#ifdef ECC_TIMING_RESISTANT
+ int wc_ecc_set_rng(ecc_key* key, WC_RNG* rng)
+ {
+     int err = 0;
+ 
++#ifdef ECC_TIMING_RESISTANT
+     if (key == NULL) {
+         err = BAD_FUNC_ARG;
+     }
+     else {
+         key->rng = rng;
+     }
++#endif
+ 
+     return err;
+ }
+-#endif
+ 
+ #ifdef HAVE_ECC_ENCRYPT
+ 
+--- a/wolfssl/wolfcrypt/ecc.h
++++ b/wolfssl/wolfcrypt/ecc.h
+@@ -584,10 +584,8 @@ WOLFSSL_API
+ void wc_ecc_fp_free(void);
+ WOLFSSL_LOCAL
+ void wc_ecc_fp_init(void);
+-#ifdef ECC_TIMING_RESISTANT
+ WOLFSSL_API
+ int wc_ecc_set_rng(ecc_key* key, WC_RNG* rng);
+-#endif
+ 
+ WOLFSSL_API
+ int wc_ecc_set_curve(ecc_key* key, int keysize, int curve_id);

package/network/config/ltq-vdsl-app/Makefile

@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-app
 PKG_VERSION:=4.17.18.6
-PKG_RELEASE:=6
+PKG_RELEASE:=8
 PKG_BASE_NAME:=dsl_cpe_control
 PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=@OPENWRT
@@ -55,7 +55,9 @@ CONFIGURE_ARGS += \
 CONFIGURE_ARGS += \
 	--enable-model=typical \
 	--enable-dsl-pm-showtime \
-	--disable-dsl-ceoc
+	--disable-dsl-ceoc \
+	--enable-dsl-pm-retx-counters \
+	--enable-dsl-pm-retx-thresholds
 #CONFIGURE_ARGS += --enable-model=debug
 
 define Package/ltq-vdsl-app/install

package/network/config/ltq-vdsl-app/src/src/dsl_cpe_ubus.c

@@ -34,6 +34,12 @@
 		str = text; \
 		break;
 
+#define STR_CASE_MAP(id, text, number) \
+	case id: \
+		str = text; \
+		map = number; \
+		break;
+
 #define IOCTL(type, request) \
 	type out; \
 	memset(&out, 0, sizeof(type)); \
@@ -99,6 +105,34 @@ typedef enum {
 	PROFILE_35B,
 } profile_t;
 
+/* These values are exported via ubus and backwards compability
+ * needs to be kept!
+ */
+enum {
+	LSTATE_MAP_UNKNOWN = -1,
+	LSTATE_MAP_NOT_INITIALIZED,
+	LSTATE_MAP_EXCEPTION,
+	LSTATE_MAP_IDLE,
+	LSTATE_MAP_SILENT,
+	LSTATE_MAP_HANDSHAKE,
+	LSTATE_MAP_FULL_INIT,
+	LSTATE_MAP_SHOWTIME_NO_SYNC,
+	LSTATE_MAP_SHOWTIME_TC_SYNC,
+	LSTATE_MAP_RESYNC,
+};
+
+/* These values are exported via ubus and backwards compability
+ * needs to be kept!
+ */
+enum {
+	PSTATE_MAP_UNKNOWN = -2,
+	PSTATE_MAP_NA,
+	PSTATE_MAP_L0,
+	PSTATE_MAP_L1,
+	PSTATE_MAP_L2,
+	PSTATE_MAP_L3,
+};
+
 static DSL_CPE_ThreadCtrl_t thread;
 static struct ubus_context *ctx;
 static struct blob_buf b;
@@ -306,32 +340,33 @@ static void version_information(int fd) {
 static void line_state(int fd) {
 	IOCTL(DSL_LineState_t, DSL_FIO_LINE_STATE_GET)
 
+	int map = LSTATE_MAP_UNKNOWN;
 	const char *str;
 	switch (out.data.nLineState) {
-	STR_CASE(DSL_LINESTATE_NOT_INITIALIZED, "Not initialized")
-	STR_CASE(DSL_LINESTATE_EXCEPTION, "Exception")
+	STR_CASE_MAP(DSL_LINESTATE_NOT_INITIALIZED, "Not initialized", LSTATE_MAP_NOT_INITIALIZED)
+	STR_CASE_MAP(DSL_LINESTATE_EXCEPTION, "Exception", LSTATE_MAP_EXCEPTION)
 	STR_CASE(DSL_LINESTATE_NOT_UPDATED, "Not updated")
 	STR_CASE(DSL_LINESTATE_IDLE_REQUEST, "Idle request")
-	STR_CASE(DSL_LINESTATE_IDLE, "Idle")
+	STR_CASE_MAP(DSL_LINESTATE_IDLE, "Idle", LSTATE_MAP_IDLE)
 	STR_CASE(DSL_LINESTATE_SILENT_REQUEST, "Silent request")
-	STR_CASE(DSL_LINESTATE_SILENT, "Silent")
-	STR_CASE(DSL_LINESTATE_HANDSHAKE, "Handshake")
+	STR_CASE_MAP(DSL_LINESTATE_SILENT, "Silent", LSTATE_MAP_SILENT)
+	STR_CASE_MAP(DSL_LINESTATE_HANDSHAKE, "Handshake", LSTATE_MAP_HANDSHAKE)
 	STR_CASE(DSL_LINESTATE_BONDING_CLR, "Bonding CLR")
-	STR_CASE(DSL_LINESTATE_FULL_INIT, "Full init")
+	STR_CASE_MAP(DSL_LINESTATE_FULL_INIT, "Full init", LSTATE_MAP_FULL_INIT)
 	STR_CASE(DSL_LINESTATE_SHORT_INIT_ENTRY, "Short init entry")
 	STR_CASE(DSL_LINESTATE_DISCOVERY, "Discovery")
 	STR_CASE(DSL_LINESTATE_TRAINING, "Training")
 	STR_CASE(DSL_LINESTATE_ANALYSIS, "Analysis")
 	STR_CASE(DSL_LINESTATE_EXCHANGE, "Exchange")
-	STR_CASE(DSL_LINESTATE_SHOWTIME_NO_SYNC, "Showtime without TC-Layer sync")
-	STR_CASE(DSL_LINESTATE_SHOWTIME_TC_SYNC, "Showtime with TC-Layer sync")
+	STR_CASE_MAP(DSL_LINESTATE_SHOWTIME_NO_SYNC, "Showtime without TC-Layer sync", LSTATE_MAP_SHOWTIME_NO_SYNC)
+	STR_CASE_MAP(DSL_LINESTATE_SHOWTIME_TC_SYNC, "Showtime with TC-Layer sync", LSTATE_MAP_SHOWTIME_TC_SYNC)
 	STR_CASE(DSL_LINESTATE_FASTRETRAIN, "Fastretrain")
 	STR_CASE(DSL_LINESTATE_LOWPOWER_L2, "Lowpower L2")
 	STR_CASE(DSL_LINESTATE_LOOPDIAGNOSTIC_ACTIVE, "Loopdiagnostic active")
 	STR_CASE(DSL_LINESTATE_LOOPDIAGNOSTIC_DATA_EXCHANGE, "Loopdiagnostic data exchange")
 	STR_CASE(DSL_LINESTATE_LOOPDIAGNOSTIC_DATA_REQUEST, "Loopdiagnostic data request")
 	STR_CASE(DSL_LINESTATE_LOOPDIAGNOSTIC_COMPLETE, "Loopdiagnostic complete")
-	STR_CASE(DSL_LINESTATE_RESYNC, "Resync")
+	STR_CASE_MAP(DSL_LINESTATE_RESYNC, "Resync", LSTATE_MAP_RESYNC)
 	STR_CASE(DSL_LINESTATE_TEST, "Test")
 	STR_CASE(DSL_LINESTATE_TEST_LOOP, "Test loop")
 	STR_CASE(DSL_LINESTATE_TEST_REVERB, "Test reverb")
@@ -351,9 +386,13 @@ static void line_state(int fd) {
 		str = NULL;
 		break;
 	};
+
 	if (str)
 		m_str("state", str);
 
+	if (map != LSTATE_MAP_UNKNOWN )
+		m_u32("state_num", map);
+
 	m_bool("up", out.data.nLineState == DSL_LINESTATE_SHOWTIME_TC_SYNC);
 }
 
@@ -377,19 +416,24 @@ static void g997_line_inventory(int fd) {
 static void g997_power_management_status(int fd) {
 	IOCTL(DSL_G997_PowerManagementStatus_t, DSL_FIO_G997_POWER_MANAGEMENT_STATUS_GET)
 
+	int map = PSTATE_MAP_UNKNOWN;
 	const char *str;
 	switch (out.data.nPowerManagementStatus) {
-	STR_CASE(DSL_G997_PMS_NA, "Power management state is not available")
-	STR_CASE(DSL_G997_PMS_L0, "L0 - Synchronized")
-	STR_CASE(DSL_G997_PMS_L1, "L1 - Power Down Data transmission (G.992.2)")
-	STR_CASE(DSL_G997_PMS_L2, "L2 - Power Down Data transmission (G.992.3 and G.992.4)")
-	STR_CASE(DSL_G997_PMS_L3, "L3 - No power")
+	STR_CASE_MAP(DSL_G997_PMS_NA, "Power management state is not available", PSTATE_MAP_NA)
+	STR_CASE_MAP(DSL_G997_PMS_L0, "L0 - Synchronized", PSTATE_MAP_L0)
+	STR_CASE_MAP(DSL_G997_PMS_L1, "L1 - Power Down Data transmission (G.992.2)", PSTATE_MAP_L1)
+	STR_CASE_MAP(DSL_G997_PMS_L2, "L2 - Power Down Data transmission (G.992.3 and G.992.4)", PSTATE_MAP_L2)
+	STR_CASE_MAP(DSL_G997_PMS_L3, "L3 - No power", PSTATE_MAP_L3)
 	default:
 		str = NULL;
 		break;
 	};
+
 	if (str)
 		m_str("power_state", str);
+
+	if (map != PSTATE_MAP_UNKNOWN)
+		m_u32("power_state_num", map);
 }
 
 static void g997_xtu_system_enabling(int fd, standard_t *standard) {
@@ -532,7 +576,12 @@ static void g997_channel_status(int fd, DSL_AccessDir_t direction) {
 	IOCTL_DIR(DSL_G997_ChannelStatus_t, DSL_FIO_G997_CHANNEL_STATUS_GET, direction);
 
 	m_u32("interleave_delay", out.data.ActualInterleaveDelay * 10);
+#ifndef INCLUDE_DSL_CPE_API_DANUBE
+	// prefer ACTNDR, see comments in drv_dsl_cpe_api_g997.h
+	m_u32("data_rate", out.data.ActualNetDataRate);
+#else
 	m_u32("data_rate", out.data.ActualDataRate);
+#endif
 }
 
 static void g997_line_status(int fd, DSL_AccessDir_t direction) {

package/network/config/netifd/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/netifd.git
-PKG_SOURCE_DATE:=2021-01-09
-PKG_SOURCE_VERSION:=c00c8335d6188daa326ecfe5a62da15a9b9987e1
-PKG_MIRROR_HASH:=c740e51e0cec13eec336ba1c7a643db3b64a9a2235f8c1b73a566cb89e841190
+PKG_SOURCE_DATE:=2021-07-26
+PKG_SOURCE_VERSION:=440eb0647708274cc8d7d9e7c2bb0cfdfba90023
+PKG_MIRROR_HASH:=eed957036ab608fdc49bdf801fc5b4405fcd2a3a5e5d3343ec39898e156c10e9
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 PKG_LICENSE:=GPL-2.0
@@ -25,6 +25,11 @@ define Package/netifd
   TITLE:=OpenWrt Network Interface Configuration Daemon
 endef
 
+define Package/netifd/conffiles
+/etc/udhcpc.user
+/etc/udhcpc.user.d/
+endef
+
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl-tiny \
 	-I$(STAGING_DIR)/usr/include \
@@ -40,6 +45,7 @@ define Package/netifd/install
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/netifd $(1)/sbin/
 	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d/
 	$(CP) $(PKG_BUILD_DIR)/scripts/* $(1)/lib/netifd/
 endef
 

package/network/config/netifd/files/etc/udhcpc.user

@@ -0,0 +1 @@
+# This script is sourced by udhcpc's dhcp.script at every DHCP event.

package/network/config/netifd/files/lib/netifd/dhcp.script

@@ -112,5 +112,8 @@ esac
 
 # user rules
 [ -f /etc/udhcpc.user ] && . /etc/udhcpc.user "$@"
+for f in /etc/udhcpc.user.d/*; do
+	[ -f "$f" ] && (. "$f" "$@")
+done
 
 exit 0

package/network/config/qos-scripts/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=qos-scripts
 PKG_VERSION:=1.3.1
-PKG_RELEASE:=2
+PKG_RELEASE:=$(AUTORELEASE)
 PKG_LICENSE:=GPL-2.0
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>

package/network/config/qos-scripts/files/usr/lib/qos/generate.sh

@@ -326,7 +326,8 @@ start_interface() {
 			append cstr "$classnr:$prio:$avgrate:$pktsize:$pktdelay:$maxrate:$qdisc:$filter" "$N"
 		done
 		append ${prefix}q "$(tcrules)" "$N"
-		export dev_${dir}="ip link set $dev up >&- 2>&-
+		export dev_${dir}="ip link add ${dev} type ifb >&- 2>&-
+ip link set $dev up >&- 2>&-
 tc qdisc del dev $dev root >&- 2>&-
 tc qdisc add dev $dev root handle 1: hfsc default ${class_default}0
 tc class add dev $dev parent 1: classid 1:1 hfsc sc rate ${rate}kbit ul rate ${rate}kbit"

package/network/services/dnsmasq/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dnsmasq
-PKG_UPSTREAM_VERSION:=2.84
+PKG_UPSTREAM_VERSION:=2.85
 PKG_VERSION:=$(subst test,~~test,$(subst rc,~rc,$(PKG_UPSTREAM_VERSION)))
 PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_UPSTREAM_VERSION).tar.xz
 PKG_SOURCE_URL:=http://thekelleys.org.uk/dnsmasq
-PKG_HASH:=603195c64b73137609b07e1024ae0b37f652b2f5fe467dce66985b3d1850050c
+PKG_HASH:=ad98d3803df687e5b938080f3d25c628fe41c878752d03fbc6199787fee312fa
 
 PKG_LICENSE:=GPL-2.0
 PKG_LICENSE_FILES:=COPYING