OpenWrt v21.02.2: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

README.md

@@ -57,8 +57,8 @@ packages to OpenWrt, please find the fitting repository below.
 * [OpenWrt Packages](https://github.com/openwrt/packages): Community repository
   of ported packages.
 
-* [OpenWrt Routing](https://github.com/openwrt-routing/packages): Packages
-  specifically focused on (mesh) routing.
+* [OpenWrt Routing](https://github.com/openwrt/routing): Packages specifically
+  focused on (mesh) routing.
 
 ## Support Information
 
@@ -74,13 +74,13 @@ For a list of supported devices see the [OpenWrt Hardware Database](https://open
 ### Support Community
 
 * [Forum](https://forum.openwrt.org): For usage, projects, discussions and hardware advise.
-* [Support Chat](https://webchat.freenode.net/#openwrt): Channel `#openwrt` on freenode.net.
+* [Support Chat](https://webchat.oftc.net/#openwrt): Channel `#openwrt` on **oftc.net**.
 
 ### Developer Community
 
 * [Bug Reports](https://bugs.openwrt.org): Report bugs in OpenWrt
 * [Dev Mailing List](https://lists.openwrt.org/mailman/listinfo/openwrt-devel): Send patches
-* [Dev Chat](https://webchat.freenode.net/#openwrt-devel): Channel `#openwrt-devel` on freenode.net.
+* [Dev Chat](https://webchat.oftc.net/#openwrt-devel): Channel `#openwrt-devel` on **oftc.net**.
 
 ## License
 

config/Config-kernel.in

@@ -436,34 +436,22 @@ config KERNEL_PROVE_LOCKING
 	select KERNEL_DEBUG_KERNEL
 	default n
 
-config KERNEL_LOCKUP_DETECTOR
-	bool "Compile the kernel with detect Hard and Soft Lockups"
+config KERNEL_SOFTLOCKUP_DETECTOR
+	bool "Compile the kernel with detect Soft Lockups"
 	depends on KERNEL_DEBUG_KERNEL
 	help
 	  Say Y here to enable the kernel to act as a watchdog to detect
-	  hard and soft lockups.
+	  soft lockups.
 
 	  Softlockups are bugs that cause the kernel to loop in kernel
 	  mode for more than 20 seconds, without giving other tasks a
 	  chance to run.  The current stack trace is displayed upon
 	  detection and the system will stay locked up.
 
-	  Hardlockups are bugs that cause the CPU to loop in kernel mode
-	  for more than 10 seconds, without letting other interrupts have a
-	  chance to run.  The current stack trace is displayed upon detection
-	  and the system will stay locked up.
-
-	  The overhead should be minimal.  A periodic hrtimer runs to
-	  generate interrupts and kick the watchdog task every 4 seconds.
-	  An NMI is generated every 10 seconds or so to check for hardlockups.
-
-	  The frequency of hrtimer and NMI events and the soft and hard lockup
-	  thresholds can be controlled through the sysctl watchdog_thresh.
-
 config KERNEL_DETECT_HUNG_TASK
 	bool "Compile the kernel with detect Hung Tasks"
 	depends on KERNEL_DEBUG_KERNEL
-	default KERNEL_LOCKUP_DETECTOR
+	default KERNEL_SOFTLOCKUP_DETECTOR
 	help
 	  Say Y here to enable the kernel to detect "hung tasks",
 	  which are bugs that cause the task to be stuck in

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://git.openwrt.org/feed/packages.git^4ceeb8fc90ed2c2e650ddddc855e7ed1df071c22
-src-git luci https://git.openwrt.org/project/luci.git^7d913b997601d533cca187cfc1b3057c3c98effc
-src-git routing https://git.openwrt.org/feed/routing.git^5b4d4c7fb6a97cac68c7d8b156fd0ab27bab4dcc
-src-git telephony https://git.openwrt.org/feed/telephony.git^178822957123b821407e1216e9e7314161512ac6
+src-git packages https://git.openwrt.org/feed/packages.git^b0ccc356900f6e1e1dc613d0ea980d5572f553dd
+src-git luci https://git.openwrt.org/project/luci.git^cc582ebfb3cb2782db841ad2a4e908d1df4046f9
+src-git routing https://git.openwrt.org/feed/routing.git^10d3ffd8b30186b49538167bac1fa1bf9c88f860
+src-git telephony https://git.openwrt.org/feed/telephony.git^001ae7137c88bb679284bfac5087cde65b5abf9a

include/feeds.mk

@@ -43,5 +43,11 @@ endef
 
 # 1: package name
 define GetABISuffix
-$(if $(filter-out kmod-%,$(1)),$(if $(ABIV_$(1)),$(ABIV_$(1)),$(foreach v,$(wildcard $(STAGING_DIR)/pkginfo/$(1).version),$(shell cat $(v)))))
+$(if $(ABIV_$(1)),$(ABIV_$(1)),$(call FormatABISuffix,$(1),$(foreach v,$(wildcard $(STAGING_DIR)/pkginfo/$(1).version),$(shell cat $(v)))))
+endef
+
+# 1: package name
+# 2: abi version
+define FormatABISuffix
+$(if $(filter-out kmod-%,$(1)),$(if $(2),$(if $(filter %0 %1 %2 %3 %4 %5 %6 %7 %8 %9,$(1)),-)$(2)))
 endef

include/image-commands.mk

@@ -240,8 +240,11 @@ define Build/jffs2
 endef
 
 define Build/kernel2minor
-	kernel2minor -k $@ -r $@.new $(1)
-	mv $@.new $@
+	$(eval temp_file := $(shell mktemp))
+	cp $@ $(temp_file)
+	kernel2minor -k $(temp_file) -r $(temp_file).new $(1)
+	mv $(temp_file).new $@
+	rm -f $(temp_file)
 endef
 
 define Build/kernel-bin

include/image.mk

@@ -419,7 +419,7 @@ DEFAULT_DEVICE_VARS := \
   DEVICE_DTS_CONFIG DEVICE_DTS_DIR DEVICE_FDT_NUM SOC BOARD_NAME \
   UIMAGE_MAGIC UIMAGE_NAME \
   SUPPORTED_DEVICES IMAGE_METADATA KERNEL_ENTRY KERNEL_LOADADDR \
-  UBOOT_PATH IMAGE_SIZE \
+  IMAGE_PREFIX DEVICE_PACKAGES UBOOT_PATH IMAGE_SIZE \
   DEVICE_COMPAT_VERSION DEVICE_COMPAT_MESSAGE \
   DEVICE_VENDOR DEVICE_MODEL DEVICE_VARIANT \
   DEVICE_ALT0_VENDOR DEVICE_ALT0_MODEL DEVICE_ALT0_VARIANT \
@@ -472,7 +472,8 @@ endef
 ifndef IB
 define Device/Build/initramfs
   $(call Device/Export,$(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE),$(1))
-  $$(_TARGET): $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE))
+  $$(_TARGET): $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) \
+	  $$(if $$(CONFIG_JSON_OVERVIEW_IMAGE_INFO), $(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json,))
 
   $(KDIR)/$$(KERNEL_INITRAMFS_NAME):: image_prepare
   $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)
@@ -481,6 +482,38 @@ define Device/Build/initramfs
   $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/$$(KERNEL_INITRAMFS_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS) image_prepare
 	@rm -f $$@
 	$$(call concat_cmd,$$(KERNEL_INITRAMFS))
+
+  $(call Device/Export,$(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json,$(1))
+
+  $(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json: $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE)
+	@mkdir -p $$(shell dirname $$@)
+	DEVICE_ID="$(1)" \
+	BIN_DIR="$(BIN_DIR)" \
+	SOURCE_DATE_EPOCH=$(SOURCE_DATE_EPOCH) \
+	IMAGE_NAME="$$(notdir $$^)" \
+	IMAGE_TYPE="kernel" \
+	IMAGE_FILESYSTEM="initramfs" \
+	IMAGE_PREFIX="$$(IMAGE_PREFIX)" \
+	DEVICE_VENDOR="$$(DEVICE_VENDOR)" \
+	DEVICE_MODEL="$$(DEVICE_MODEL)" \
+	DEVICE_VARIANT="$$(DEVICE_VARIANT)" \
+	DEVICE_ALT0_VENDOR="$$(DEVICE_ALT0_VENDOR)" \
+	DEVICE_ALT0_MODEL="$$(DEVICE_ALT0_MODEL)" \
+	DEVICE_ALT0_VARIANT="$$(DEVICE_ALT0_VARIANT)" \
+	DEVICE_ALT1_VENDOR="$$(DEVICE_ALT1_VENDOR)" \
+	DEVICE_ALT1_MODEL="$$(DEVICE_ALT1_MODEL)" \
+	DEVICE_ALT1_VARIANT="$$(DEVICE_ALT1_VARIANT)" \
+	DEVICE_ALT2_VENDOR="$$(DEVICE_ALT2_VENDOR)" \
+	DEVICE_ALT2_MODEL="$$(DEVICE_ALT2_MODEL)" \
+	DEVICE_ALT2_VARIANT="$$(DEVICE_ALT2_VARIANT)" \
+	DEVICE_TITLE="$$(DEVICE_TITLE)" \
+	DEVICE_PACKAGES="$$(DEVICE_PACKAGES)" \
+	TARGET="$(BOARD)" \
+	SUBTARGET="$(if $(SUBTARGET),$(SUBTARGET),generic)" \
+	VERSION_NUMBER="$(VERSION_NUMBER)" \
+	VERSION_CODE="$(VERSION_CODE)" \
+	SUPPORTED_DEVICES="$$(SUPPORTED_DEVICES)" \
+	$(TOPDIR)/scripts/json_add_image_info.py $$@
 endef
 endif
 

include/kernel-defaults.mk

@@ -43,7 +43,9 @@ else
 		rmdir $(LINUX_DIR); \
 	fi
 	ln -s $(CONFIG_EXTERNAL_KERNEL_TREE) $(LINUX_DIR)
-	$(_SINGLE) [ -d $(LINUX_DIR)/user_headers ] && rm -rf $(LINUX_DIR)/user_headers
+	if [ -d $(LINUX_DIR)/user_headers ]; then \
+		rm -rf $(LINUX_DIR)/user_headers; \
+	fi
   endef
 endif
 

include/kernel-version.mk

@@ -6,9 +6,9 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-5.4 = .111
+LINUX_VERSION-5.4 = .179
 
-LINUX_KERNEL_HASH-5.4.111 = 21626132658dc34cb41b7aa7b80ecf83751890a71ac1a63d77aea9d488271a03
+LINUX_KERNEL_HASH-5.4.179 = 2c9bdec0922a95aff34e8d53d2e0ecf7e842033cd908d2959a43d34afb5d897d
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

include/package-ipkg.mk

@@ -99,7 +99,7 @@ _endef=endef
 
 ifeq ($(DUMP),)
   define BuildTarget/ipkg
-    ABIV_$(1):=$(if $(filter-out kmod-%,$(1)),$(ABI_VERSION))
+    ABIV_$(1):=$(call FormatABISuffix,$(1),$(ABI_VERSION))
     PDIR_$(1):=$(call FeedPackageDir,$(1))
     IPKG_$(1):=$$(PDIR_$(1))/$(1)$$(ABIV_$(1))_$(VERSION)_$(PKGARCH).ipk
     IDIR_$(1):=$(PKG_BUILD_DIR)/ipkg-$(PKGARCH)/$(1)

include/prereq-build.mk

@@ -65,11 +65,22 @@ $(eval $(call TestHostCommand,perl-data-dumper, \
 	Please install the Perl Data::Dumper module, \
 	perl -MData::Dumper -e 1))
 
+$(eval $(call TestHostCommand,perl-findbin, \
+	Please install the Perl FindBin module, \
+	perl -MFindBin -e 1))
+
+$(eval $(call TestHostCommand,perl-file-copy, \
+	Please install the Perl File::Copy module, \
+	perl -MFile::Copy -e 1))
+
+$(eval $(call TestHostCommand,perl-file-compare, \
+	Please install the Perl File::Compare module, \
+	perl -MFile::Compare -e 1))
+
 $(eval $(call TestHostCommand,perl-thread-queue, \
 	Please install the Perl Thread::Queue module, \
 	perl -MThread::Queue -e 1))
 
-
 $(eval $(call SetupHostCommand,tar,Please install GNU 'tar', \
 	gtar --version 2>&1 | grep GNU, \
 	gnutar --version 2>&1 | grep GNU, \
@@ -142,20 +153,26 @@ $(eval $(call SetupHostCommand,perl,Please install Perl 5.x, \
 $(eval $(call CleanupPython2))
 
 $(eval $(call SetupHostCommand,python,Please install Python >= 3.5, \
+	python3.10 -V 2>&1 | grep 'Python 3', \
 	python3.9 -V 2>&1 | grep 'Python 3', \
 	python3.8 -V 2>&1 | grep 'Python 3', \
 	python3.7 -V 2>&1 | grep 'Python 3', \
 	python3.6 -V 2>&1 | grep 'Python 3', \
 	python3.5 -V 2>&1 | grep 'Python 3', \
-	python3 -V 2>&1 | grep -E 'Python 3\.[5-9]\.?'))
+	python3 -V 2>&1 | grep -E 'Python 3\.([5-9]|10)\.?'))
 
 $(eval $(call SetupHostCommand,python3,Please install Python >= 3.5, \
+	python3.10 -V 2>&1 | grep 'Python 3', \
 	python3.9 -V 2>&1 | grep 'Python 3', \
 	python3.8 -V 2>&1 | grep 'Python 3', \
 	python3.7 -V 2>&1 | grep 'Python 3', \
 	python3.6 -V 2>&1 | grep 'Python 3', \
 	python3.5 -V 2>&1 | grep 'Python 3', \
-	python3 -V 2>&1 | grep -E 'Python 3\.[5-9]\.?'))
+	python3 -V 2>&1 | grep -E 'Python 3\.([5-9]|10)\.?'))
+
+$(eval $(call TestHostCommand,python3-distutils, \
+	Please install the Python3 distutils module, \
+	$(STAGING_DIR_HOST)/bin/python3 -c 'import distutils'))
 
 $(eval $(call SetupHostCommand,git,Please install Git (git-core) >= 1.7.12.2, \
 	git --exec-path | xargs -I % -- grep -q -- --recursive %/git-submodule))
@@ -167,7 +184,9 @@ $(eval $(call SetupHostCommand,rsync,Please install 'rsync', \
 	rsync --version </dev/null))
 
 $(eval $(call SetupHostCommand,which,Please install 'which', \
-	which which | grep which))
+	/usr/bin/which which, \
+	/bin/which which, \
+	which which))
 
 $(STAGING_DIR_HOST)/bin/mkhash: $(SCRIPT_DIR)/mkhash.c
 	mkdir -p $(dir $@)

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.0-rc1)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.2)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16046-59980f7aaf)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16495-bf0c965af0)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.0-rc1)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.2)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/Makefile

@@ -66,8 +66,10 @@ $(curdir)/install: $(TMP_DIR)/.build $(curdir)/merge $(if $(CONFIG_TARGET_PER_DE
 	- find $(STAGING_DIR_ROOT) -type d | $(XARGS) chmod 0755
 	rm -rf $(TARGET_DIR) $(TARGET_DIR_ORIG)
 	mkdir -p $(TARGET_DIR)/tmp
-	$(call opkg,$(TARGET_DIR)) install \
-		$(call opkg_package_files,$(foreach pkg,$(shell cat $(PACKAGE_INSTALL_FILES) 2>/dev/null),$(pkg)$(call GetABISuffix,$(pkg))))
+	$(file >$(TMP_DIR)/opkg_install_list,\
+	  $(call opkg_package_files,\
+	    $(foreach pkg,$(shell cat $(PACKAGE_INSTALL_FILES) 2>/dev/null),$(pkg)$(call GetABISuffix,$(pkg)))))
+	$(call opkg,$(TARGET_DIR)) install $$(cat $(TMP_DIR)/opkg_install_list)
 	@for file in $(PACKAGE_INSTALL_FILES); do \
 		[ -s $$file.flags ] || continue; \
 		for flag in `cat $$file.flags`; do \

package/base-files/files/bin/config_generate

@@ -40,7 +40,7 @@ generate_static_network() {
 	uci -q batch <<-EOF
 		delete network.loopback
 		set network.loopback='interface'
-		set network.loopback.ifname='lo'
+		set network.loopback.device='lo'
 		set network.loopback.proto='static'
 		set network.loopback.ipaddr='127.0.0.1'
 		set network.loopback.netmask='255.0.0.0'
@@ -91,51 +91,72 @@ generate_static_network() {
 
 addr_offset=2
 generate_network() {
-	local ifname macaddr protocol type ipaddr netmask vlan
+	local ports device macaddr protocol type ipaddr netmask vlan
 	local bridge=$2
 
 	json_select network
 		json_select "$1"
-			json_get_vars ifname macaddr protocol ipaddr netmask vlan
+			json_get_vars device macaddr protocol ipaddr netmask vlan
+			json_get_values ports ports
 		json_select ..
 	json_select ..
 
-	[ -n "$ifname" ] || return
+	[ -n "$device" -o -n "$ports" ] || return
 
-	# force bridge for multi-interface devices (and lan)
-	case "$1:$ifname" in
-		*\ * | lan:*) type="bridge" ;;
-	esac
+	# Force bridge for "lan" as it may have other devices (e.g. wireless)
+	# bridged
+	[ "$1" = "lan" -a -z "$ports" ] && {
+		ports="$device"
+	}
+
+	[ -n "$ports" -a -z "$bridge" ] && {
+		uci -q batch <<-EOF
+			add network device
+			set network.@device[-1].name='br-$1'
+			set network.@device[-1].type='bridge'
+		EOF
+		for port in $ports; do uci add_list network.@device[-1].ports="$port"; done
+		[ -n "$macaddr" ] && {
+			for port in $ports; do
+				uci -q batch <<-EOF
+					add network device
+					set network.@device[-1].name='$port'
+					set network.@device[-1].macaddr='$macaddr'
+				EOF
+			done
+		}
+		device=br-$1
+		type=
+		macaddr=""
+	}
 
 	[ -n "$bridge" ] && {
+		[ -z "$ports" ] && ports="$device"
 		if [ -z "$vlan" ]; then
 			bridge_vlan_id=$((bridge_vlan_id + 1))
 			vlan=$bridge_vlan_id
 		fi
-		generate_bridge_vlan $1 $bridge "$ifname" $vlan
-		ifname=$bridge.$vlan
+		generate_bridge_vlan $1 $bridge "$ports" $vlan
+		device=$bridge.$vlan
 		type=""
 	}
 
+	if [ -n "$macaddr" ]; then
+		uci -q batch <<-EOF
+			add network device
+			set network.@device[-1].name='$device'
+			set network.@device[-1].macaddr='$macaddr'
+		EOF
+	fi
+
 	uci -q batch <<-EOF
 		delete network.$1
 		set network.$1='interface'
 		set network.$1.type='$type'
-		set network.$1.ifname='$ifname'
+		set network.$1.device='$device'
 		set network.$1.proto='none'
 	EOF
 
-	if [ -n "$macaddr" ]; then
-		for name in $ifname; do
-			uci -q batch <<-EOF
-				delete network.$1_${name/./_}_dev
-				set network.$1_${name/./_}_dev='device'
-				set network.$1_${name/./_}_dev.name='$name'
-				set network.$1_${name/./_}_dev.macaddr='$macaddr'
-			EOF
-		done
-	fi
-
 	case "$protocol" in
 		static)
 			local ipad
@@ -156,14 +177,14 @@ generate_network() {
 
 		dhcp)
 			# fixup IPv6 slave interface if parent is a bridge
-			[ "$type" = "bridge" ] && ifname="br-$1"
+			[ "$type" = "bridge" ] && device="br-$1"
 
 			uci set network.$1.proto='dhcp'
 			[ -e /proc/sys/net/ipv6 ] && {
 				uci -q batch <<-EOF
 					delete network.${1}6
 					set network.${1}6='interface'
-					set network.${1}6.ifname='$ifname'
+					set network.${1}6.device='$device'
 					set network.${1}6.proto='dhcpv6'
 				EOF
 			}
@@ -180,7 +201,7 @@ generate_network() {
 					set network.$1.ipv6='1'
 					delete network.${1}6
 					set network.${1}6='interface'
-					set network.${1}6.ifname='@${1}'
+					set network.${1}6.device='@${1}'
 					set network.${1}6.proto='dhcpv6'
 				EOF
 			}

package/base-files/files/etc/init.d/boot

@@ -21,9 +21,10 @@ boot() {
 	[ -f /proc/mounts ] || /sbin/mount_root
 	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
 
-	mkdir -p /var/run
-	mkdir -p /var/log
 	mkdir -p /var/lock
+	chmod 1777 /var/lock
+	mkdir -p /var/log
+	mkdir -p /var/run
 	mkdir -p /var/state
 	mkdir -p /var/tmp
 	mkdir -p /tmp/.uci

package/base-files/files/etc/init.d/system

@@ -4,8 +4,7 @@
 START=10
 USE_PROCD=1
 
-validate_system_section()
-{
+validate_system_section() {
 	uci_load_validate system system "$1" "$2" \
 		'hostname:string:OpenWrt' \
 		'conloglevel:uinteger' \
@@ -23,8 +22,9 @@ system_config() {
 	echo "$hostname" > /proc/sys/kernel/hostname
 	[ -z "$conloglevel" -a -z "$buffersize" ] || dmesg ${conloglevel:+-n $conloglevel} ${buffersize:+-s $buffersize}
 	echo "$timezone" > /tmp/TZ
-	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/$zonename" ] && \
-		ln -sf "/usr/share/zoneinfo/$zonename" /tmp/localtime && rm -f /tmp/TZ
+	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/${zonename// /_}" ] \
+		&& ln -sf "/usr/share/zoneinfo/${zonename// /_}" /tmp/localtime \
+		&& rm -f /tmp/TZ
 
 	# apply timezone to kernel
 	hwclock -u --systz
@@ -35,8 +35,7 @@ reload_service() {
 	config_foreach validate_system_section system system_config
 }
 
-service_triggers()
-{
+service_triggers() {
 	procd_add_reload_trigger "system"
 	procd_add_validation validate_system_section
 }

package/base-files/files/etc/rc.common

@@ -100,9 +100,9 @@ service_data() {
 }
 
 service_running() {
-	local service="${1:-$(basename $initscript)}"
-	local instance="${2:-*}"
-	procd_running "$service" "$instance" "$@"
+	local instance="${1:-*}"
+
+	procd_running "$(basename $initscript)" "$instance"
 }
 
 ${INIT_TRACE:+set -x}

package/base-files/files/etc/shinit

@@ -22,7 +22,7 @@ service() {
 			printf "%-30s\t%10s\t%10s\n"  "$F" \
 			$( $($F enabled) && echo "enabled" || echo "disabled" ) \
 			$( [ "$(ubus call service list "{ 'verbose': true, 'name': '$(basename $F)' }" \
-			| jsonfilter -q -e "@.$(basename $F).instances[*].running" | uniq)" = "true" ] \
+			| jsonfilter -q -e "@['$(basename $F)'].instances[*].running" | uniq)" = "true" ] \
 			&& echo "running" || echo "stopped" )
 		done;
 		return 1

package/base-files/files/lib/functions/uci-defaults.sh

@@ -39,7 +39,13 @@ ucidef_set_interface() {
 
 		[ -n "$opt" -a -n "$val" ] || break
 
-		json_add_string "$opt" "$val"
+		[ "$opt" = "device" -a "$val" != "${val/ //}" ] && {
+			json_select_array "ports"
+			for e in $val; do json_add_string "" "$e"; done
+			json_close_array
+		} || {
+			json_add_string "$opt" "$val"
+		}
 	done
 
 	if ! json_is_a protocol string; then
@@ -73,11 +79,11 @@ ucidef_set_compat_version() {
 }
 
 ucidef_set_interface_lan() {
-	ucidef_set_interface "lan" ifname "$1" protocol "${2:-static}"
+	ucidef_set_interface "lan" device "$1" protocol "${2:-static}"
 }
 
 ucidef_set_interface_wan() {
-	ucidef_set_interface "wan" ifname "$1" protocol "${2:-dhcp}"
+	ucidef_set_interface "wan" device "$1" protocol "${2:-dhcp}"
 }
 
 ucidef_set_interfaces_lan_wan() {
@@ -195,14 +201,14 @@ _ucidef_finish_switch_roles() {
 
 			json_select_object "$role"
 				# attach previous interfaces (for multi-switch devices)
-				json_get_var devices ifname
+				json_get_var devices device
 				if ! list_contains devices "$device"; then
 					devices="${devices:+$devices }$device"
 				fi
 			json_select ..
 		json_select ..
 
-		ucidef_set_interface "$role" ifname "$devices"
+		ucidef_set_interface "$role" device "$devices"
 	done
 }
 

package/base-files/files/lib/preinit/10_indicate_preinit

@@ -72,14 +72,20 @@ preinit_config_board() {
 
 	json_select network
 		json_select "lan"
-			json_get_vars ifname
+			json_get_vars device
+			json_get_values ports ports
 		json_select ..
 	json_select ..
 
-	[ -n "$ifname" ] || return
+	[ -n "$device" -o -n "$ports" ] || return
+
+	# swconfig uses $device and DSA uses ports
+	[ -z "$ports" ] && {
+		ports="$device"
+	}
 
 	# only use the first one
-	ifname=${ifname%% *}
+	ifname=${ports%% *}
 
 	if [ -x /sbin/swconfig ]; then
 		# configure the switch, if present
@@ -91,6 +97,8 @@ preinit_config_board() {
 	else
 		# trim any vlan ids
 		ifname=${ifname%\.*}
+		# trim any vlan modifiers like :t
+		ifname=${ifname%\:*}
 	fi
 
 	pi_ifname=$ifname

package/base-files/files/lib/upgrade/common.sh

@@ -267,7 +267,7 @@ get_partitions() { # <device> <filename>
 				local type="$1"
 				local lba="$(( $(hex_le32_to_cpu $4) * 0x100000000 + $(hex_le32_to_cpu $3) ))"
 				local end="$(( $(hex_le32_to_cpu $6) * 0x100000000 + $(hex_le32_to_cpu $5) ))"
-				local num="$(( $end - $lba ))"
+				local num="$(( $end - $lba + 1 ))"
 
 				[ "$type" = "00000000000000000000000000000000" ] && continue
 

package/base-files/files/sbin/wifi

@@ -130,10 +130,12 @@ wifi_updown() {
 		ubus_wifi_cmd "$cmd" "$2"
 		scan_wifi
 		cmd=up
+		ubus call network reload
 	}
 	[ reconf = "$1" ] && {
 		scan_wifi
 		cmd=reconf
+		ubus call network reload
 	}
 	ubus_wifi_cmd "$cmd" "$2"
 	_wifi_updown "$@"
@@ -246,7 +248,7 @@ case "$1" in
 	reload) wifi_reload "$2";;
 	reload_legacy) wifi_reload_legacy "$2";;
 	--help|help) usage;;
-	reconf) ubus call network reload; wifi_updown "reconf" "$2";;
-	''|up) ubus call network reload; wifi_updown "enable" "$2";;
+	reconf) wifi_updown "reconf" "$2";;
+	''|up) wifi_updown "enable" "$2";;
 	*) usage; exit 1;;
 esac

package/base-files/image-config.in

@@ -183,7 +183,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/releases/21.02.0-rc1"
+		default "https://downloads.openwrt.org/releases/21.02.2"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/arm-trusted-firmware-bcm63xx/Makefile

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+
+include $(TOPDIR)/rules.mk
+
+PKG_VERSION:=2.2
+PKG_RELEASE:=$(AUTORELEASE)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=$(PROJECT_GIT)/project/bcm63xx/atf.git
+PKG_SOURCE_DATE:=2021-12-24
+PKG_SOURCE_VERSION:=e6d46baf3fae79f693f90bf34f7284c3dfc64aef
+PKG_MIRROR_HASH:=9d5d04f572b1b6ddc6eb3064b9cb09f5fe982e82d350790041d35316349af124
+
+PKG_MAINTAINER:=Rafał Miłecki <rafal@milecki.pl>
+
+include $(INCLUDE_DIR)/trusted-firmware-a.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Trusted-Firmware-A/Default
+  PLAT:=bcm
+  DEFAULT:=y
+endef
+
+define Trusted-Firmware-A/bcm4908
+  BUILD_TARGET:=bcm4908
+  NAME:=BCM4908
+  BRCM_CHIP=4908
+  TFA_IMAGE:=bl31.bin
+endef
+
+TFA_TARGETS:= \
+	bcm4908
+
+TFA_MAKE_FLAGS += \
+	BRCM_CHIP=$(BRCM_CHIP)
+
+define Package/trusted-firmware-a/install
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/$(PLAT)/release/$(TFA_IMAGE) $(STAGING_DIR_IMAGE)/
+endef
+
+$(eval $(call BuildPackage/Trusted-Firmware-A))

package/boot/uboot-at91/patches/001-fix-Wformat-security.patch

@@ -1,8 +1,6 @@
-diff --git a/cmd/version.c b/cmd/version.c
-index b2fffe99..bcbbeb18 100644
 --- a/cmd/version.c
 +++ b/cmd/version.c
-@@ -18,7 +18,7 @@ static int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+@@ -18,7 +18,7 @@ static int do_version(cmd_tbl_t *cmdtp,
  {
  	char buf[DISPLAY_OPTIONS_BANNER_LENGTH];
  
@@ -11,11 +9,9 @@ index b2fffe99..bcbbeb18 100644
  #ifdef CC_VERSION_STRING
  	puts(CC_VERSION_STRING "\n");
  #endif
-diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c
-index 3425ed11..8c2e1d5c 100644
 --- a/drivers/pinctrl/pinctrl-uclass.c
 +++ b/drivers/pinctrl/pinctrl-uclass.c
-@@ -368,7 +368,7 @@ int pinctrl_get_pin_name(struct udevice *dev, int selector, char *buf,
+@@ -368,7 +368,7 @@ int pinctrl_get_pin_name(struct udevice
  	if (!ops->get_pin_name)
  		return -ENOSYS;
  
@@ -24,11 +20,9 @@ index 3425ed11..8c2e1d5c 100644
  
  	return 0;
  }
-diff --git a/lib/efi_loader/efi_variable.c b/lib/efi_loader/efi_variable.c
-index c316bdfe..5fe8129c 100644
 --- a/lib/efi_loader/efi_variable.c
 +++ b/lib/efi_loader/efi_variable.c
-@@ -522,7 +522,7 @@ efi_status_t EFIAPI efi_set_variable(u16 *variable_name,
+@@ -522,7 +522,7 @@ efi_status_t EFIAPI efi_set_variable(u16
  
  	if (old_size)
  		/* APPEND_WRITE */

package/boot/uboot-at91/patches/010-fix_dtc_compilation_on_host_gcc10.patch

@@ -0,0 +1,46 @@
+From e33a814e772cdc36436c8c188d8c42d019fda639 Mon Sep 17 00:00:00 2001
+From: Dirk Mueller <dmueller@suse.com>
+Date: Tue, 14 Jan 2020 18:53:41 +0100
+Subject: [PATCH] scripts/dtc: Remove redundant YYLOC global declaration
+
+gcc 10 will default to -fno-common, which causes this error at link
+time:
+
+  (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
+
+This is because both dtc-lexer as well as dtc-parser define the same
+global symbol yyloc. Before with -fcommon those were merged into one
+defintion. The proper solution would be to to mark this as "extern",
+however that leads to:
+
+  dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
+   26 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+In file included from dtc-lexer.l:24:
+dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
+  127 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+cc1: all warnings being treated as errors
+
+which means the declaration is completely redundant and can just be
+dropped.
+
+Signed-off-by: Dirk Mueller <dmueller@suse.com>
+Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+[robh: cherry-pick from upstream]
+Cc: stable@vger.kernel.org
+Signed-off-by: Rob Herring <robh@kernel.org>
+---
+ scripts/dtc/dtc-lexer.l | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/scripts/dtc/dtc-lexer.l
++++ b/scripts/dtc/dtc-lexer.l
+@@ -38,7 +38,6 @@ LINECOMMENT	"//".*\n
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */

package/boot/uboot-envtools/files/ramips

@@ -26,6 +26,10 @@ allnet,all0256n-8m|\
 allnet,all5002)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
+ampedwireless,ally-00x19k|\
+ampedwireless,ally-r1900k)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" "4"
+	;;
 buffalo,wsr-1166dhp|\
 buffalo,wsr-600dhp|\
 mediatek,linkit-smart-7688|\
@@ -34,7 +38,8 @@ xiaomi,mi-router-3g-v2|\
 xiaomi,mi-router-4a-gigabit|\
 xiaomi,mi-router-4c|\
 xiaomi,miwifi-nano|\
-zbtlink,zbt-wg2626)
+zbtlink,zbt-wg2626|\
+zte,mf283plus)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
 	;;
 hootoo,ht-tm05|\
@@ -43,9 +48,13 @@ ravpower,rp-wd03)
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x4000" "0x1000" "0x1000"
 	;;
+jcg,q20)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
+	;;
 linksys,ea7300-v1|\
 linksys,ea7300-v2|\
 linksys,ea7500-v2|\
+linksys,ea8100-v1|\
 xiaomi,mi-router-3g|\
 xiaomi,mi-router-3-pro|\
 xiaomi,mi-router-4|\
@@ -53,6 +62,11 @@ xiaomi,mi-router-ac2100|\
 xiaomi,redmi-router-ac2100)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
 	;;
+zyxel,nr7101)
+	idx="$(find_mtd_index Config)"
+	[ -n "$idx" ] && \
+		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x1000" "0x80000"
+	;;
 esac
 
 config_load ubootenv

package/boot/uboot-lantiq/patches/0030-lzma-force-8bit-reads.patch

@@ -0,0 +1,57 @@
+From a40a6e16ed76e5e26a0f60226b64c311d4a62c9f Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Sun, 31 Oct 2021 23:04:54 +0100
+Subject: [PATCH] lzma: force 8bit reads
+
+At least since gcc 7.3.0 (OpenWrt 18.06) lwr/lwl are used in the
+assembly of LzmaProps_Decode. While the decission made by the compiler
+looks perfect fine, it triggers some obscure hang on lantiq danube-s
+v1.5 with MX29LV640EB NOR flash chips.
+
+Only if the offset 1 is used, the hang can be observed. Using any other
+offset works fine:
+
+  lwl s0,0(a1) - s0 == 0x6d000080
+  lwl s0,1(a1) - hangs
+  lwl s0,2(a1) - s0 == 0x0080xxxx
+  lwl s0,3(a1) - s0 == 0x80xxxxxx
+
+It isn't clear whether it is a limitation of the flash chip, the EBU or
+something else.
+
+Force 8bit reads to prevent gcc optimizing the read with lwr/lwl
+instructions.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ lib/lzma/LzmaDec.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/lib/lzma/LzmaDec.c
++++ b/lib/lzma/LzmaDec.c
+@@ -7,6 +7,7 @@
+ #include "LzmaDec.h"
+ 
+ #include <linux/string.h>
++#include <asm/io.h>
+ 
+ #define kNumTopBits 24
+ #define kTopValue ((UInt32)1 << kNumTopBits)
+@@ -703,7 +704,7 @@ static ELzmaDummy LzmaDec_TryDummy(const
+ 
+ static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
+ {
+-  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
++  p->code = ((UInt32)readb(&data[1]) << 24) | ((UInt32)readb(&data[2]) << 16) | ((UInt32)readb(&data[3]) << 8) | ((UInt32)readb(&data[4]));
+   p->range = 0xFFFFFFFF;
+   p->needFlush = 0;
+ }
+@@ -929,7 +930,7 @@ SRes LzmaProps_Decode(CLzmaProps *p, con
+   if (size < LZMA_PROPS_SIZE)
+     return SZ_ERROR_UNSUPPORTED;
+   else
+-    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
++    dicSize = readb(&data[1]) | ((UInt32)readb(&data[2]) << 8) | ((UInt32)readb(&data[3]) << 16) | ((UInt32)readb(&data[4]) << 24);
+ 
+   if (dicSize < LZMA_DIC_MIN)
+     dicSize = LZMA_DIC_MIN;

package/boot/uboot-lantiq/patches/101-fix-crypt-header-clash.patch

@@ -0,0 +1,172 @@
+Fix header clash with system /usr/include/sha1.h and sha256.h when libmd
+is installed.
+
+Backport of u-boot commit "includes: move openssl headers to include/u-boot"
+https://github.com/u-boot/u-boot/commit/2b9912e6a7df7b1f60beb7942bd0e6fa5f9d0167
+
+--- a/board/gdsys/p1022/controlcenterd-id.c
++++ b/board/gdsys/p1022/controlcenterd-id.c
+@@ -30,7 +30,7 @@
+ #include <i2c.h>
+ #include <mmc.h>
+ #include <tpm.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/byteorder.h>
+ #include <asm/unaligned.h>
+ #include <pca9698.h>
+--- a/board/pcs440ep/pcs440ep.c
++++ b/board/pcs440ep/pcs440ep.c
+@@ -13,7 +13,7 @@
+ #include <asm/processor.h>
+ #include <spd_sdram.h>
+ #include <status_led.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/io.h>
+ #include <net.h>
+ #include <ata.h>
+--- a/common/cmd_sha1sum.c
++++ b/common/cmd_sha1sum.c
+@@ -11,7 +11,7 @@
+ #include <common.h>
+ #include <command.h>
+ #include <hash.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ 
+ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+ {
+--- a/common/hash.c
++++ b/common/hash.c
+@@ -14,8 +14,8 @@
+ #include <command.h>
+ #include <hw_sha.h>
+ #include <hash.h>
+-#include <sha1.h>
+-#include <sha256.h>
++#include <u-boot/sha1.h>
++#include <u-boot/sha256.h>
+ #include <asm/io.h>
+ #include <asm/errno.h>
+ 
+--- a/common/image-fit.c
++++ b/common/image-fit.c
+@@ -21,7 +21,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ #endif /* !USE_HOSTCC*/
+ 
+ #include <bootstage.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <u-boot/crc.h>
+ #include <u-boot/md5.h>
+ 
+--- a/common/image.c
++++ b/common/image.c
+@@ -34,7 +34,7 @@
+ #endif
+ 
+ #include <u-boot/md5.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/errno.h>
+ #include <asm/io.h>
+ 
+--- a/drivers/crypto/ace_sha.c
++++ b/drivers/crypto/ace_sha.c
+@@ -5,8 +5,8 @@
+  * SPDX-License-Identifier:	GPL-2.0+
+  */
+ #include <common.h>
+-#include <sha256.h>
+-#include <sha1.h>
++#include <u-boot/sha256.h>
++#include <u-boot/sha1.h>
+ #include <asm/errno.h>
+ #include "ace_sha.h"
+ 
+--- /dev/null
++++ b/include/u-boot/sha1.h
+@@ -0,0 +1 @@
++#include "../sha1.h"
+--- /dev/null
++++ b/include/u-boot/sha256.h
+@@ -0,0 +1 @@
++#include "../sha256.h"
+--- a/lib/rsa/rsa-verify.c
++++ b/lib/rsa/rsa-verify.c
+@@ -7,7 +7,7 @@
+ #include <common.h>
+ #include <fdtdec.h>
+ #include <rsa.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/byteorder.h>
+ #include <asm/errno.h>
+ #include <asm/unaligned.h>
+--- a/lib/sha1.c
++++ b/lib/sha1.c
+@@ -36,7 +36,7 @@
+ #include <string.h>
+ #endif /* USE_HOSTCC */
+ #include <watchdog.h>
+-#include "sha1.h"
++#include <u-boot/sha1.h>
+ 
+ /*
+  * 32-bit integer manipulation macros (big endian)
+--- a/lib/sha256.c
++++ b/lib/sha256.c
+@@ -11,7 +11,7 @@
+ #endif /* USE_HOSTCC */
+ #include <watchdog.h>
+ #include <linux/string.h>
+-#include <sha256.h>
++#include <u-boot/sha256.h>
+ 
+ /*
+  * 32-bit integer manipulation macros (big endian)
+--- a/lib/tpm.c
++++ b/lib/tpm.c
+@@ -7,7 +7,7 @@
+ 
+ #include <common.h>
+ #include <stdarg.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <tpm.h>
+ #include <asm/unaligned.h>
+ 
+--- a/tools/imls/imls.c
++++ b/tools/imls/imls.c
+@@ -24,7 +24,7 @@
+ #include <mtd/mtd-user.h>
+ #endif
+ 
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <libfdt.h>
+ #include <fdt_support.h>
+ #include <image.h>
+--- a/tools/mkimage.h
++++ b/tools/mkimage.h
+@@ -18,7 +18,7 @@
+ #include <sys/stat.h>
+ #include <time.h>
+ #include <unistd.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include "fdt_host.h"
+ 
+ #undef MKIMAGE_DEBUG
+--- a/tools/ubsha1.c
++++ b/tools/ubsha1.c
+@@ -13,7 +13,7 @@
+ #include <errno.h>
+ #include <string.h>
+ #include <sys/stat.h>
+-#include "sha1.h"
++#include <u-boot/sha1.h>
+ 
+ int main (int argc, char **argv)
+ {

package/boot/uboot-layerscape/patches/010-fix_dtc_compilation_on_host_gcc10.patch

@@ -0,0 +1,46 @@
+From e33a814e772cdc36436c8c188d8c42d019fda639 Mon Sep 17 00:00:00 2001
+From: Dirk Mueller <dmueller@suse.com>
+Date: Tue, 14 Jan 2020 18:53:41 +0100
+Subject: [PATCH] scripts/dtc: Remove redundant YYLOC global declaration
+
+gcc 10 will default to -fno-common, which causes this error at link
+time:
+
+  (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
+
+This is because both dtc-lexer as well as dtc-parser define the same
+global symbol yyloc. Before with -fcommon those were merged into one
+defintion. The proper solution would be to to mark this as "extern",
+however that leads to:
+
+  dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
+   26 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+In file included from dtc-lexer.l:24:
+dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
+  127 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+cc1: all warnings being treated as errors
+
+which means the declaration is completely redundant and can just be
+dropped.
+
+Signed-off-by: Dirk Mueller <dmueller@suse.com>
+Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+[robh: cherry-pick from upstream]
+Cc: stable@vger.kernel.org
+Signed-off-by: Rob Herring <robh@kernel.org>
+---
+ scripts/dtc/dtc-lexer.l | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/scripts/dtc/dtc-lexer.l
++++ b/scripts/dtc/dtc-lexer.l
+@@ -38,7 +38,6 @@ LINECOMMENT	"//".*\n
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */

package/firmware/amd64-microcode/Makefile

@@ -1,45 +0,0 @@
-#
-# Copyright (C) 2018 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=amd64-microcode
-PKG_VERSION:=20191218
-PKG_RELEASE:=1
-
-PKG_SOURCE:=amd64-microcode_3.$(PKG_VERSION).$(PKG_RELEASE).tar.xz
-PKG_SOURCE_URL:=http://ftp.debian.org/debian/pool/non-free/a/amd64-microcode/
-PKG_HASH:=f469b79348097c5f04641b67a39d0ee5a2a1916c9556281626c04f2275d4132d
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-3.$(PKG_VERSION).$(PKG_RELEASE)
-
-PKG_LICENSE_FILE:=LICENSE.amd-ucode
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/amd64-microcode
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=$(PKG_SOURCE_URL)
-  DEPENDS:=@TARGET_x86
-  TITLE:=AMD64 CPU microcode
-endef
-
-define Build/Prepare
-	rm -rf $(PKG_BUILD_DIR)
-	mkdir -p $(PKG_BUILD_DIR)
-	$(TAR) -C $(BUILD_DIR) -xJf $(DL_DIR)/$(PKG_SOURCE)
-endef
-
-define Build/Compile
-endef
-
-define Package/amd64-microcode/install
-	$(INSTALL_DIR) $(1)/lib/firmware/amd-ucode
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.bin $(1)/lib/firmware/amd-ucode
-endef
-
-$(eval $(call BuildPackage,amd64-microcode))

package/firmware/cypress-nvram/Makefile

@@ -18,6 +18,8 @@ PKG_SOURCE_URL:=https://github.com/openwrt/cypress-nvram.git
 
 PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/cypress-nvram-default
@@ -98,6 +100,9 @@ define Package/cypress-nvram-43455-sdio-rpi-4b/install
 	$(INSTALL_DATA) \
 		$(PKG_BUILD_DIR)/brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
 		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
+		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.txt
 endef
 
 $(eval $(call BuildPackage,cypress-nvram-43455-sdio-rpi-4b))

package/firmware/intel-microcode/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=intel-microcode
-PKG_VERSION:=20200616
+PKG_VERSION:=20210608
 PKG_RELEASE:=1
 
-PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).$(PKG_RELEASE).tar.xz
+PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).2.tar.xz
 PKG_SOURCE_URL:=http://ftp.debian.org/debian/pool/non-free/i/intel-microcode/
-PKG_HASH:=bcc3b81c452fe4649a948c022475d76c1cdfbb730f36749a082f412f1406a3b9
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-3.$(PKG_VERSION).$(PKG_RELEASE)
+PKG_HASH:=fbf82688ffd0d87b352a35c57bd097ea014f0ad32c9c8f9629725c1b43d1c84d
+PKG_BUILD_DIR:=$(BUILD_DIR)/intel-microcode-3.$(PKG_VERSION).2
 
 PKG_BUILD_DEPENDS:=iucode-tool/host
 
@@ -24,6 +24,8 @@ else
 	MICROCODE:="intel-microcode"
 endif
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/intel-microcode

package/firmware/ipq-wifi/Makefile

@@ -43,6 +43,8 @@ ALLWIFIBOARDS:= \
 	linksys_ea8300 \
 	linksys_mr8300-v0 \
 	luma_wrtq-329acn \
+	mikrotik_hap-ac2 \
+	mikrotik_sxtsq-5-ac \
 	mobipromo_cm520-79f \
 	nec_wg2600hp3 \
 	plasmacloud_pa1200 \
@@ -126,6 +128,8 @@ $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
 $(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
 $(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
+$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
 $(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
 $(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
 $(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))

package/firmware/layerscape/fman-ucode/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://github.com/NXP/qoriq-fm-ucode.git
 PKG_SOURCE_VERSION:=c275e91392e2adab1ed22f3867b8269ca3c54014
 PKG_MIRROR_HASH:=90b619ed501462b92f34f2fabfa09d6aaa5235990891d1c3132821c7d18a39bd
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-fman

package/firmware/layerscape/ls-ddr-phy/Makefile

@@ -18,6 +18,8 @@ PKG_BUILD_DEPENDS:=tfa-layerscape/host
 PKG_LICENSE:=EULA
 PKG_LICENSE_FILES:=NXP-Binary-EULA.txt
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-ddr-phy

package/firmware/layerscape/ls-dpl/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/mc
 PKG_SOURCE_VERSION:=8672a5f5abcd3a354dcab07e03f2a8a69b2e962d
 PKG_MIRROR_HASH:=4b8ad3148aee1e0c034206543472aebb435655fd03a661c4c1be545dcac7ddf0
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/kernel.mk
 

package/firmware/layerscape/ls-mc/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://github.com/NXP/qoriq-mc-binary.git
 PKG_SOURCE_VERSION:=f73683596a7b72124d67b62e64f3dc2bb36b9321
 PKG_MIRROR_HASH:=1cba30c2a6814763c3e155c1cc5fa21998bb6ad5814fcb09e99f98bf36f65d9e
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-mc

package/firmware/layerscape/ls-rcw/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/rc
 PKG_SOURCE_VERSION:=e0fab6d9b61003caef577f7474c2fac61e6ba2ff
 PKG_MIRROR_HASH:=b6bc66e27b7c6db31101fdc2e6be7255181861bd38d8f25eb5eb80c468983eb2
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-rcw

package/firmware/layerscape/ppfe-firmware/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://github.com/NXP/qoriq-engine-pfe-bin.git
 PKG_SOURCE_VERSION:=d3a8ef0760c54ddc243039c86389497e37be90ab
 PKG_MIRROR_HASH:=64be93b8249d298e7b5fd0846787835f0659b6ab6c55b40b809366c79e272eb8
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 RSTRIP:=:

package/firmware/linux-firmware/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=linux-firmware
-PKG_VERSION:=20201118
-PKG_RELEASE:=3
+PKG_VERSION:=20211216
+PKG_RELEASE:=1
 
 PKG_SOURCE_URL:=@KERNEL/linux/kernel/firmware
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_HASH:=863d5a31da725b856a917280d1e3014929b3bc3d4e6e5faecf530c13afb7e2b9
+PKG_HASH:=eeddb4e6bef31fd1a3757f12ccc324929bbad97855c0b9ec5ed780f74de1837d
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/firmware/linux-firmware/amd.mk

@@ -0,0 +1,29 @@
+Package/amd64-microcode = $(call Package/firmware-default,AMD64 CPU microcode,@TARGET_x86)
+define Package/amd64-microcode/install
+	$(INSTALL_DIR) $(1)/lib/firmware/amd-ucode
+	$(CP) \
+		$(PKG_BUILD_DIR)/amd-ucode/*.bin \
+		$(1)/lib/firmware/amd-ucode
+endef
+
+$(eval $(call BuildPackage,amd64-microcode))
+
+Package/amdgpu-firmware = $(call Package/firmware-default,AMDGPU Video Driver firmware)
+define Package/amdgpu-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/amdgpu
+	$(CP) \
+		$(PKG_BUILD_DIR)/amdgpu/*.bin \
+		$(1)/lib/firmware/amdgpu
+endef
+
+$(eval $(call BuildPackage,amdgpu-firmware))
+
+Package/radeon-firmware = $(call Package/firmware-default,Radeon Video Driver firmware)
+define Package/radeon-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/radeon
+	$(CP) \
+		$(PKG_BUILD_DIR)/radeon/*.bin \
+		$(1)/lib/firmware/radeon
+endef
+
+$(eval $(call BuildPackage,radeon-firmware))

package/firmware/linux-firmware/amdgpu.mk

@@ -1,9 +0,0 @@
-Package/amdgpu-firmware = $(call Package/firmware-default,AMDGPU Video Driver firmware)
-define Package/amdgpu-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/amdgpu
-	$(CP) \
-		$(PKG_BUILD_DIR)/amdgpu/*.bin \
-		$(1)/lib/firmware/amdgpu
-endef
-
-$(eval $(call BuildPackage,amdgpu-firmware))

package/firmware/linux-firmware/broadcom.mk

@@ -34,24 +34,6 @@ define Package/brcmfmac-firmware-4329-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4329-sdio))
 
-Package/brcmfmac-firmware-43362-sdio = $(call Package/firmware-default,Broadcom BCM43362 FullMac SDIO firmware)
-define Package/brcmfmac-firmware-43362-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/brcm/brcmfmac43362-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac43362-sdio.bin
-endef
-$(eval $(call BuildPackage,brcmfmac-firmware-43362-sdio))
-
-Package/brcmfmac-firmware-43430-sdio = $(call Package/firmware-default,Broadcom BCM43430 FullMac SDIO firmware)
-define Package/brcmfmac-firmware-43430-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/brcm/brcmfmac43430-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.bin
-endef
-$(eval $(call BuildPackage,brcmfmac-firmware-43430-sdio))
-
 Package/brcmfmac-firmware-43430-sdio-rpi-3b = $(call Package/firmware-default,Broadcom BCM43430 NVRAM for Raspberry Pi 3B)
 define Package/brcmfmac-firmware-43430-sdio-rpi-3b/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
@@ -79,15 +61,6 @@ define Package/brcmfmac-firmware-43430a0-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-43430a0-sdio))
 
-Package/brcmfmac-firmware-43455-sdio = $(call Package/firmware-default,Broadcom BCM43455 FullMac SDIO firmware)
-define Package/brcmfmac-firmware-43455-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/brcm/brcmfmac43455-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.bin
-endef
-$(eval $(call BuildPackage,brcmfmac-firmware-43455-sdio))
-
 Package/brcmfmac-firmware-43455-sdio-rpi-3b-plus = $(call Package/firmware-default,Broadcom BCM43455 NVRAM for Raspberry Pi 3B+)
 define Package/brcmfmac-firmware-43455-sdio-rpi-3b-plus/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm

package/firmware/linux-firmware/qca_ath10k.mk

@@ -26,6 +26,23 @@ define Package/ath10k-firmware-qca4019/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca4019))
 
+Package/ath10k-board-qca9377 = $(call Package/firmware-default,ath10k qca9377 board firmware)
+define Package/ath10k-board-qca9377/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9377/hw1.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/ath10k/QCA9377/hw1.0/board-2.bin \
+		$(1)/lib/firmware/ath10k/QCA9377/hw1.0/
+endef
+$(eval $(call BuildPackage,ath10k-board-qca9377))
+Package/ath10k-firmware-qca9377 = $(call Package/firmware-default,ath10k qca9377 firmware,+ath10k-board-qca9377)
+define Package/ath10k-firmware-qca9377/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9377/hw1.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/ath10k/QCA9377/hw1.0/firmware-6.bin \
+		$(1)/lib/firmware/ath10k/QCA9377/hw1.0/firmware-6.bin
+endef
+$(eval $(call BuildPackage,ath10k-firmware-qca9377))
+
 Package/ath10k-board-qca9887 = $(call Package/firmware-default,ath10k qca9887 board firmware)
 define Package/ath10k-board-qca9887/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0

package/firmware/linux-firmware/radeon.mk

@@ -1,9 +0,0 @@
-Package/radeon-firmware = $(call Package/firmware-default,Radeon Video Driver firmware)
-define Package/radeon-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/radeon
-	$(CP) \
-		$(PKG_BUILD_DIR)/radeon/*.bin \
-		$(1)/lib/firmware/radeon
-endef
-
-$(eval $(call BuildPackage,radeon-firmware))

package/firmware/linux-firmware/realtek.mk

@@ -76,16 +76,10 @@ Package/rtl8723bu-firmware = $(call Package/firmware-default,RealTek RTL8723BU f
 define Package/rtl8723bu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8723bu_nic.bin $(1)/lib/firmware/rtlwifi
+	ln -s rtl8723bu_nic.bin $(1)/lib/firmware/rtlwifi/rtl8723bs_nic.bin
 endef
 $(eval $(call BuildPackage,rtl8723bu-firmware))
 
-Package/rtl8723bs-firmware = $(call Package/firmware-default,RealTek RTL8723BS firmware)
-define Package/rtl8723bs-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8723bs*.bin $(1)/lib/firmware/rtlwifi
-endef
-$(eval $(call BuildPackage,rtl8723bs-firmware))
-
 Package/rtl8821ae-firmware = $(call Package/firmware-default,RealTek RTL8821AE firmware)
 define Package/rtl8821ae-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi

package/firmware/wireless-regdb/Makefile

@@ -1,12 +1,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wireless-regdb
-PKG_VERSION:=2020.11.20
+PKG_VERSION:=2021.08.28
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
-PKG_HASH:=b4164490d82ff7b0086e812ac42ab27baf57be24324d4c0ee1c5dd6ba27f2a52
+PKG_HASH:=cff370c410d1e6d316ae0a7fa8ac6278fdf1efca5d3d664aca7cfd2aafa54446
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/kernel/ath10k-ct/Makefile

@@ -1,16 +1,16 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ath10k-ct
-PKG_RELEASE=2
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-01-11
-PKG_SOURCE_VERSION:=9fe1df7d4f783b6b0cd1c99d11979e5a6e6fc40b
-PKG_MIRROR_HASH:=4e30e256716611045e930b95eadaa8bfcadd5bdd8bbe3869cfe0f377920e812b
+PKG_SOURCE_DATE:=2021-09-22
+PKG_SOURCE_VERSION:=e6a7d5b5b834737cd12e357b5efdc2e42d923bf6
+PKG_MIRROR_HASH:=62a1b97089d3561730656ef73beb3cd77231ec636645115cc1bbb3c6c84a6fe3
 
 # Build the 5.10 ath10k-ct driver version.
 # Probably this should match as closely as

package/kernel/ath10k-ct/patches/164-ath10k-commit-rates-from-mac80211.patch

@@ -1,37 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Tue, 26 Feb 2019 08:06:35 +0100
-Subject: ath10k-ct: apply mac80211 rates to ath10k-ct rate state
-
-The rates from mac80211 have to be copied to the state of ath10k-ct or
-otherwise the ath10k_check_apply_special_rates function overwrites
-them again with some default values. This breaks for example the
-mcast_rate set for a wifi-iface.
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
---- a/ath10k-5.10/mac.c
-+++ b/ath10k-5.10/mac.c
-@@ -6774,6 +6774,7 @@ static void ath10k_recalculate_mgmt_rate
- 		return;
- 	}
- 
-+	arvif->mgt_rate[def->chan->band] = hw_rate_code;
- 	vdev_param = ar->wmi.vdev_param->mgmt_rate;
- 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
- 					hw_rate_code);
-@@ -7000,6 +7001,7 @@ static void ath10k_bss_info_changed(stru
- 			   "mac vdev %d mcast_rate %x\n",
- 			   arvif->vdev_id, rate);
- 
-+		arvif->mcast_rate[band] = rate;
- 		vdev_param = ar->wmi.vdev_param->mcast_data_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- 						vdev_param, rate);
-@@ -7008,6 +7010,7 @@ static void ath10k_bss_info_changed(stru
- 				    "failed to set mcast rate on vdev %i: %d\n",
- 				    arvif->vdev_id,  ret);
- 
-+		arvif->bcast_rate[band] = rate;
- 		vdev_param = ar->wmi.vdev_param->bcast_data_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- 						vdev_param, rate);

package/kernel/ath10k-ct/patches/201-ath10k-add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -210,7 +210,7 @@ v13:
  
  #include "htt.h"
  #include "htc.h"
-@@ -1551,6 +1552,13 @@ struct ath10k {
+@@ -1557,6 +1558,13 @@ struct ath10k {
  	} testmode;
  
  	struct {
@@ -445,7 +445,7 @@ v13:
  {
 --- a/ath10k-5.10/wmi-tlv.c
 +++ b/ath10k-5.10/wmi-tlv.c
-@@ -4585,6 +4585,8 @@ static const struct wmi_ops wmi_tlv_ops
+@@ -4594,6 +4594,8 @@ static const struct wmi_ops wmi_tlv_ops
  	.gen_echo = ath10k_wmi_tlv_op_gen_echo,
  	.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
  	.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,

package/kernel/ath10k-ct/patches/202-ath10k-use-tpt-trigger-by-default.patch

@@ -16,7 +16,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
 
 --- a/ath10k-5.10/core.h
 +++ b/ath10k-5.10/core.h
-@@ -1659,6 +1659,10 @@ struct ath10k {
+@@ -1665,6 +1665,10 @@ struct ath10k {
  	u8 csi_data[4096];
  	u16 csi_data_len;
  
@@ -42,7 +42,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	if (ret)
 --- a/ath10k-5.10/mac.c
 +++ b/ath10k-5.10/mac.c
-@@ -11400,7 +11400,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -11405,7 +11405,7 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  
  #ifdef CPTCFG_MAC80211_LEDS

package/kernel/bcm63xx-cfe/Makefile

@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=bcm63xx-cfe
-PKG_RELEASE:=2
+PKG_RELEASE:=1
 
 PKG_SOURCE_URL:=https://github.com/openwrt/bcm63xx-cfe.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-03-05
-PKG_SOURCE_VERSION:=d03501629fc8b1ba8f9b0961d543c256a3d0098f
-PKG_MIRROR_HASH:=b32a6f68d59c8f4534def7ec2568ad7da7a612a605b9406328309c78115ee88d
+PKG_SOURCE_DATE:=2021-06-22
+PKG_SOURCE_VERSION:=e5050f37150b34deb547b50feccd0e7439cb5bd7
+PKG_MIRROR_HASH:=85fed9f4bdf23cf7d33a02f549ffe9073666890f786d5ffa484c0368552b75ae
 
 PKG_FLAGS:=nonshared
 

package/kernel/exfat/Makefile

@@ -7,12 +7,12 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=exfat
-PKG_VERSION:=5.10.1
-PKG_RELEASE:=1
+PKG_VERSION:=5.12.3
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/namjaejeon/linux-exfat-oot/tar.gz/$(PKG_VERSION)?
-PKG_HASH:=0ff77dd7d39eb231d00c3c4909b9fad31ebeeb618bd6fa18fce142becc9c1f98
+PKG_HASH:=43889c73af76c466bbc904aff80354a62ecaa24c7b20e354ff735f5949907982
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/linux-exfat-oot-$(PKG_VERSION)
 
 PKG_MAINTAINER:=

package/kernel/gpio-button-hotplug/src/gpio-button-hotplug.c

@@ -242,11 +242,11 @@ static int gpio_button_get_value(struct gpio_keys_button_data *bdata)
 	int val;
 
 	if (bdata->can_sleep)
-		val = !!gpio_get_value_cansleep(bdata->b->gpio);
+		val = !!gpiod_get_value_cansleep(bdata->gpiod);
 	else
-		val = !!gpio_get_value(bdata->b->gpio);
+		val = !!gpiod_get_value(bdata->gpiod);
 
-	return val ^ bdata->b->active_low;
+	return val;
 }
 
 static void gpio_keys_handle_button(struct gpio_keys_button_data *bdata)
@@ -365,7 +365,6 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 	struct device_node *node, *pp;
 	struct gpio_keys_platform_data *pdata;
 	struct gpio_keys_button *button;
-	int error;
 	int nbuttons;
 	int i = 0;
 
@@ -375,14 +374,12 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 	nbuttons = of_get_child_count(node);
 	if (nbuttons == 0)
-		return NULL;
+		return ERR_PTR(-EINVAL);
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata) + nbuttons * (sizeof *button),
 		GFP_KERNEL);
-	if (!pdata) {
-		error = -ENOMEM;
-		goto err_out;
-	}
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
 
 	pdata->buttons = (struct gpio_keys_button *)(pdata + 1);
 	pdata->nbuttons = nbuttons;
@@ -391,37 +388,13 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 	of_property_read_u32(node, "poll-interval", &pdata->poll_interval);
 
 	for_each_child_of_node(node, pp) {
-		enum of_gpio_flags flags;
-
-		if (!of_find_property(pp, "gpios", NULL)) {
-			pdata->nbuttons--;
-			dev_warn(dev, "Found button without gpios\n");
-			continue;
-		}
-
 		button = (struct gpio_keys_button *)(&pdata->buttons[i++]);
 
-		button->irq = irq_of_parse_and_map(pp, 0);
-
-		button->gpio = of_get_gpio_flags(pp, 0, &flags);
-		if (button->gpio < 0) {
-			error = button->gpio;
-			if (error != -ENOENT) {
-				if (error != -EPROBE_DEFER)
-					dev_err(dev,
-						"Failed to get gpio flags, error: %d\n",
-						error);
-				return ERR_PTR(error);
-			}
-		} else {
-			button->active_low = !!(flags & OF_GPIO_ACTIVE_LOW);
-		}
-
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {
-			dev_err(dev, "Button without keycode: 0x%x\n",
-				button->gpio);
-			error = -EINVAL;
-			goto err_out;
+			dev_err(dev, "Button node '%s' without keycode\n",
+				pp->full_name);
+			of_node_put(pp);
+			return ERR_PTR(-EINVAL);
 		}
 
 		button->desc = of_get_property(pp, "label", NULL);
@@ -434,17 +407,12 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 		if (of_property_read_u32(pp, "debounce-interval",
 					&button->debounce_interval))
 			button->debounce_interval = 5;
-	}
 
-	if (pdata->nbuttons == 0) {
-		error = -EINVAL;
-		goto err_out;
+		button->irq = irq_of_parse_and_map(pp, 0);
+		button->gpio = -ENOENT; /* mark this as device-tree */
 	}
 
 	return pdata;
-
-err_out:
-	return ERR_PTR(error);
 }
 
 static struct of_device_id gpio_keys_of_match[] = {
@@ -471,11 +439,12 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 static int gpio_keys_button_probe(struct platform_device *pdev,
 		struct gpio_keys_button_dev **_bdev, int polled)
 {
-	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
 	struct device *dev = &pdev->dev;
+	struct gpio_keys_platform_data *pdata = dev_get_platdata(dev);
 	struct gpio_keys_button_dev *bdev;
 	struct gpio_keys_button *buttons;
-	int error;
+	struct device_node *prev = NULL;
+	int error = 0;
 	int i;
 
 	if (!pdata) {
@@ -514,46 +483,67 @@ static int gpio_keys_button_probe(struct platform_device *pdev,
 	for (i = 0; i < pdata->nbuttons; i++) {
 		struct gpio_keys_button *button = &buttons[i];
 		struct gpio_keys_button_data *bdata = &bdev->data[i];
-		unsigned int gpio = button->gpio;
+		const char *desc = button->desc ? button->desc : DRV_NAME;
 
 		if (button->wakeup) {
 			dev_err(dev, "does not support wakeup\n");
-			return -EINVAL;
+			error = -EINVAL;
+			goto out;
 		}
 
 		bdata->map_entry = button_get_index(button->code);
 		if (bdata->map_entry < 0) {
-			dev_warn(dev, "does not support key code:%u\n",
+			dev_err(dev, "does not support key code:%u\n",
 				button->code);
-			continue;
+			error = -EINVAL;
+			goto out;
 		}
 
 		if (!(button->type == 0 || button->type == EV_KEY ||
 		      button->type == EV_SW)) {
-			dev_warn(dev, "only supports buttons or switches\n");
-			continue;
+			dev_err(dev, "only supports buttons or switches\n");
+			error = -EINVAL;
+			goto out;
 		}
 
-		error = devm_gpio_request(dev, gpio,
-				     button->desc ? button->desc : DRV_NAME);
-		if (error) {
-			dev_err(dev, "unable to claim gpio %u, err=%d\n",
-				gpio, error);
-			return error;
-		}
-		bdata->gpiod = gpio_to_desc(gpio);
-		if (!bdata->gpiod)
-			return -EINVAL;
+		if (gpio_is_valid(button->gpio)) {
+			/* legacy platform data... but is it the lookup table? */
+			bdata->gpiod = devm_gpiod_get_index(dev, desc, i,
+							    GPIOD_IN);
+			if (IS_ERR(bdata->gpiod)) {
+				/* or the legacy (button->gpio is good) way? */
+				error = devm_gpio_request_one(dev,
+					button->gpio, GPIOF_IN | (
+					button->active_low ? GPIOF_ACTIVE_LOW :
+					0), desc);
+				if (error) {
+					if (error != -EPROBE_DEFER) {
+						dev_err(dev, "unable to claim gpio %d, err=%d\n",
+							button->gpio, error);
+					}
+					goto out;
+				}
 
-		error = gpio_direction_input(gpio);
-		if (error) {
-			dev_err(dev,
-				"unable to set direction on gpio %u, err=%d\n",
-				gpio, error);
-			return error;
+				bdata->gpiod = gpio_to_desc(button->gpio);
+			}
+		} else {
+			/* Device-tree */
+			struct device_node *child =
+				of_get_next_child(dev->of_node, prev);
+
+			bdata->gpiod = devm_gpiod_get_from_of_node(dev,
+				child, "gpios", 0, GPIOD_IN, desc);
+
+			prev = child;
 		}
 
-		bdata->can_sleep = gpio_cansleep(gpio);
+		if (IS_ERR_OR_NULL(bdata->gpiod)) {
+			error = IS_ERR(bdata->gpiod) ? PTR_ERR(bdata->gpiod) :
+				-EINVAL;
+			goto out;
+		}
+
+		bdata->can_sleep = gpiod_cansleep(bdata->gpiod);
 		bdata->last_state = -1; /* Unknown state on boot */
 
 		if (bdev->polled) {
@@ -584,8 +574,11 @@ static int gpio_keys_button_probe(struct platform_device *pdev,
 	platform_set_drvdata(pdev, bdev);
 
 	*_bdev = bdev;
+	error = 0;
 
-	return 0;
+out:
+	of_node_put(prev);
+	return error;
 }
 
 static int gpio_keys_probe(struct platform_device *pdev)
@@ -594,9 +587,7 @@ static int gpio_keys_probe(struct platform_device *pdev)
 	struct gpio_keys_button_dev *bdev;
 	int ret, i;
 
-
 	ret = gpio_keys_button_probe(pdev, &bdev, 0);
-
 	if (ret)
 		return ret;
 
@@ -608,12 +599,8 @@ static int gpio_keys_probe(struct platform_device *pdev)
 
 		INIT_DELAYED_WORK(&bdata->work, gpio_keys_irq_work_func);
 
-		if (!bdata->gpiod)
-			continue;
-
 		if (!button->irq) {
-			bdata->irq = gpio_to_irq(button->gpio);
-
+			bdata->irq = gpiod_to_irq(bdata->gpiod);
 			if (bdata->irq < 0) {
 				dev_err(&pdev->dev, "failed to get irq for gpio:%d\n",
 					button->gpio);
@@ -631,7 +618,6 @@ static int gpio_keys_probe(struct platform_device *pdev)
 		ret = devm_request_threaded_irq(&pdev->dev,
 			bdata->irq, NULL, button_handle_irq,
 			irqflags, dev_name(&pdev->dev), bdata);
-
 		if (ret < 0) {
 			bdata->irq = 0;
 			dev_err(&pdev->dev, "failed to request irq:%d for gpio:%d\n",
@@ -653,14 +639,12 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 	int ret;
 
 	ret = gpio_keys_button_probe(pdev, &bdev, 1);
-
 	if (ret)
 		return ret;
 
 	INIT_DELAYED_WORK(&bdev->work, gpio_keys_polled_poll);
 
 	pdata = bdev->pdata;
-
 	if (pdata->enable)
 		pdata->enable(bdev->dev);
 

package/kernel/lantiq/ltq-vdsl/Makefile

@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-vr9
 PKG_VERSION:=4.17.18.6
-PKG_RELEASE:=3
+PKG_RELEASE:=4
 
 PKG_BASE_NAME:=drv_dsl_cpe_api
 PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
@@ -60,6 +60,8 @@ CONFIGURE_ARGS += --enable-kernel-include="$(LINUX_DIR)/include" \
 	--enable-linux-26 \
 	--enable-kernelbuild="$(LINUX_DIR)" \
 	--enable-debug-prints=no \
+	--enable-dsl-pm-retx-counters \
+	--enable-dsl-pm-retx-thresholds \
 	ARCH=mips
 
 CONFIGURE_ARGS += --enable-model=full

package/kernel/linux/modules/leds.mk

@@ -84,6 +84,22 @@ endef
 $(eval $(call KernelPackage,ledtrig-oneshot))
 
 
+define KernelPackage/ledtrig-pattern
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=LED Pattern Trigger
+  KCONFIG:=CONFIG_LEDS_TRIGGER_PATTERN
+  FILES:=$(LED_TRIGGER_DIR)/ledtrig-pattern.ko
+  AUTOLOAD:=$(call AutoLoad,50,ledtrig-pattern)
+endef
+
+define KernelPackage/ledtrig-pattern/description
+ This allows LEDs to be controlled by a software or hardware pattern
+ which is a series of tuples, of brightness and duration (ms).
+endef
+
+$(eval $(call KernelPackage,ledtrig-pattern))
+
+
 define KernelPackage/leds-pca963x
   SUBMENU:=$(LEDS_MENU)
   TITLE:=PCA963x LED support
@@ -114,3 +130,17 @@ define KernelPackage/leds-pwm/description
 endef
 
 $(eval $(call KernelPackage,leds-pwm))
+
+define KernelPackage/leds-uleds
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=Userspace LEDs
+  KCONFIG:=CONFIG_LEDS_USER
+  FILES:=$(LINUX_DIR)/drivers/leds/uleds.ko
+  AUTOLOAD:=$(call AutoLoad,60,uleds,1)
+endef
+
+define KernelPackage/leds-uleds/description
+ This option enables support for userspace LEDs.
+endef
+
+$(eval $(call KernelPackage,leds-uleds))

package/kernel/linux/modules/netsupport.mk

@@ -721,7 +721,7 @@ $(eval $(call KernelPackage,mppe))
 
 
 SCHED_MODULES = $(patsubst $(LINUX_DIR)/net/sched/%.ko,%,$(wildcard $(LINUX_DIR)/net/sched/*.ko))
-SCHED_MODULES_CORE = sch_ingress sch_fq_codel sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_tcindex cls_u32 em_u32 act_mirred act_skbedit cls_matchall
+SCHED_MODULES_CORE = sch_ingress sch_fq_codel sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_tcindex cls_u32 em_u32 act_gact act_mirred act_skbedit cls_matchall
 SCHED_MODULES_FILTER = $(SCHED_MODULES_CORE) act_connmark act_ctinfo sch_cake sch_netem sch_mqprio em_ipset cls_bpf cls_flower act_bpf act_vlan
 SCHED_MODULES_EXTRA = $(filter-out $(SCHED_MODULES_FILTER),$(SCHED_MODULES))
 SCHED_FILES = $(patsubst %,$(LINUX_DIR)/net/sched/%.ko,$(filter $(SCHED_MODULES_CORE),$(SCHED_MODULES)))
@@ -745,6 +745,7 @@ define KernelPackage/sched-core
 	CONFIG_NET_CLS_ROUTE4 \
 	CONFIG_NET_CLS_TCINDEX \
 	CONFIG_NET_CLS_U32 \
+	CONFIG_NET_ACT_GACT \
 	CONFIG_NET_ACT_MIRRED \
 	CONFIG_NET_ACT_SKBEDIT \
 	CONFIG_NET_CLS_MATCHALL \
@@ -899,7 +900,6 @@ define KernelPackage/sched
 	CONFIG_NET_SCH_FQ \
 	CONFIG_NET_SCH_PIE \
 	CONFIG_NET_ACT_POLICE \
-	CONFIG_NET_ACT_GACT \
 	CONFIG_NET_ACT_IPT \
 	CONFIG_NET_ACT_PEDIT \
 	CONFIG_NET_ACT_SIMP \

package/kernel/linux/modules/usb.mk

@@ -561,7 +561,7 @@ $(eval $(call KernelPackage,usb-serial))
 
 define AddDepends/usb-serial
   SUBMENU:=$(USB_MENU)
-  DEPENDS+=kmod-usb-serial $(1)
+  DEPENDS+=+kmod-usb-serial $(1)
 endef
 
 

package/kernel/mac80211/Makefile

@@ -10,10 +10,10 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=5.10.16-1
+PKG_VERSION:=5.10.85-1
 PKG_RELEASE:=1
-PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.10.16/
-PKG_HASH:=12856db780c5023edc47e2d18486eb3346bb7c82f1f2fc48deb3b163142f7d2d
+PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.10.85/
+PKG_HASH:=0b5f2d5acf572c448f102a186aaccd8b77bda182ac5166c7b2e3217870162784
 
 PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)
@@ -434,9 +434,15 @@ config-$(call config_package,rsi91x-sdio) += RSI_SDIO
 
 config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS
 
+C_DEFINES=
+
+ifeq ($(BUILD_VARIANT),smallbuffers)
+	C_DEFINES+= -DCONFIG_ATH10K_SMALLBUFFERS
+endif
+
 MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \
 	$(KERNEL_MAKE_FLAGS) \
-	EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include $(IREMAP_CFLAGS)" \
+	EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include $(IREMAP_CFLAGS) $(C_DEFINES)" \
 	KLIB_BUILD="$(LINUX_DIR)" \
 	MODPROBE=true \
 	KLIB=$(TARGET_MODULES_DIR) \

package/kernel/mac80211/ath.mk

@@ -1,5 +1,5 @@
 PKG_DRIVERS += \
-	ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k \
+	ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k ath10k-smallbuffers \
 	carl9170 owl-loader ar5523 wil6210
 
 PKG_CONFIG_DEPENDS += \
@@ -55,6 +55,7 @@ config-$(CONFIG_ATH10K_THERMAL) += ATH10K_THERMAL
 
 config-$(call config_package,ath9k-htc) += ATH9K_HTC
 config-$(call config_package,ath10k) += ATH10K ATH10K_PCI
+config-$(call config_package,ath10k-smallbuffers) += ATH10K ATH10K_PCI ATH10K_SMALLBUFFERS
 
 config-$(call config_package,ath5k) += ATH5K
 ifdef CONFIG_TARGET_ath25
@@ -260,6 +261,7 @@ define KernelPackage/ath10k
 	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
 	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
   AUTOLOAD:=$(call AutoProbe,ath10k_pci)
+  VARIANT:=regular
 endef
 
 define KernelPackage/ath10k/description
@@ -273,14 +275,20 @@ define KernelPackage/ath10k/config
        config ATH10K_LEDS
                bool "Enable LED support"
                default y
-               depends on PACKAGE_kmod-ath10k
+               depends on PACKAGE_kmod-ath10k || PACKAGE_kmod-ath10k-smallbuffers
 
        config ATH10K_THERMAL
                bool "Enable thermal sensors and throttling support"
-               depends on PACKAGE_kmod-ath10k
+               depends on PACKAGE_kmod-ath10k || PACKAGE_kmod-ath10k-smallbuffers
 
 endef
 
+define KernelPackage/ath10k-smallbuffers
+  $(call KernelPackage/ath10k)
+  TITLE+= (small buffers for low-RAM devices)
+  VARIANT:=smallbuffers
+endef
+
 define KernelPackage/carl9170
   $(call KernelPackage/mac80211/Default)
   TITLE:=Driver for Atheros AR9170 USB sticks

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -26,7 +26,6 @@ drv_mac80211_init_device_config() {
 	hostapd_common_add_device_config
 
 	config_add_string path phy 'macaddr:macaddr'
-	config_add_string hwmode
 	config_add_string tx_burst
 	config_add_string distance
 	config_add_int beacon_int chanbw frag rts
@@ -44,11 +43,26 @@ drv_mac80211_init_device_config() {
 		su_beamformee \
 		mu_beamformer \
 		mu_beamformee \
+		he_su_beamformer \
+		he_su_beamformee \
+		he_mu_beamformer \
 		vht_txop_ps \
 		htc_vht \
 		rx_antenna_pattern \
-		tx_antenna_pattern
-	config_add_int vht_max_a_mpdu_len_exp vht_max_mpdu vht_link_adapt vht160 rx_stbc tx_stbc
+		tx_antenna_pattern \
+		he_spr_sr_control \
+		he_twt_required
+	config_add_int \
+		beamformer_antennas \
+		beamformee_antennas \
+		vht_max_a_mpdu_len_exp \
+		vht_max_mpdu \
+		vht_link_adapt \
+		vht160 \
+		rx_stbc \
+		tx_stbc \
+		he_bss_color \
+		he_spr_non_srg_obss_pd_max_offset
 	config_add_boolean \
 		ldpc \
 		greenfield \
@@ -96,6 +110,23 @@ mac80211_add_capabilities() {
 	export -n -- "$__var=$__out"
 }
 
+mac80211_add_he_capabilities() {
+	local __out= oifs
+
+	oifs="$IFS"
+	IFS=:
+	for capab in "$@"; do
+		set -- $capab
+		[ "$(($4))" -gt 0 ] || continue
+		[ "$(((0x$2) & $3))" -gt 0 ] || {
+			eval "$1=0"
+			continue
+		}
+		append base_cfg "$1=1" "$N"
+	done
+	IFS="$oifs"
+}
+
 mac80211_hostapd_setup_base() {
 	local phy="$1"
 
@@ -119,6 +150,9 @@ mac80211_hostapd_setup_base() {
 	[ "$noscan" -gt 0 ] && hostapd_noscan=1
 	[ "$tx_burst" = 0 ] && tx_burst=
 
+	chan_ofs=0
+	[ "$band" = "6g" ] && chan_ofs=1
+
 	ieee80211n=1
 	ht_capab=
 	case "$htmode" in
@@ -126,7 +160,7 @@ mac80211_hostapd_setup_base() {
 		HT40*|VHT40|VHT80|VHT160|HE40|HE80|HE160)
 			case "$hwmode" in
 				a)
-					case "$(( ($channel / 4) % 2 ))" in
+					case "$(( (($channel / 4) + $chan_ofs) % 2 ))" in
 						1) ht_capab="[HT40+]";;
 						0) ht_capab="[HT40-]";;
 					esac
@@ -200,7 +234,7 @@ mac80211_hostapd_setup_base() {
 	case "$htmode" in
 		VHT20|HE20) enable_ac=1;;
 		VHT40|HE40)
-			case "$(( ($channel / 4) % 2 ))" in
+			case "$(( (($channel / 4) + $chan_ofs) % 2 ))" in
 				1) idx=$(($channel + 2));;
 				0) idx=$(($channel - 2));;
 			esac
@@ -208,7 +242,7 @@ mac80211_hostapd_setup_base() {
 			vht_center_seg0=$idx
 		;;
 		VHT80|HE80)
-			case "$(( ($channel / 4) % 4 ))" in
+			case "$(( (($channel / 4) + $chan_ofs) % 4 ))" in
 				1) idx=$(($channel + 6));;
 				2) idx=$(($channel + 2));;
 				3) idx=$(($channel - 2));;
@@ -219,15 +253,35 @@ mac80211_hostapd_setup_base() {
 			vht_center_seg0=$idx
 		;;
 		VHT160|HE160)
-			case "$channel" in
-				36|40|44|48|52|56|60|64) idx=50;;
-				100|104|108|112|116|120|124|128) idx=114;;
-			esac
+			if [ "$band" = "6g" ]; then
+				case "$channel" in
+					1|5|9|13|17|21|25|29) idx=15;;
+					33|37|41|45|49|53|57|61) idx=47;;
+					65|69|73|77|81|85|89|93) idx=79;;
+					97|101|105|109|113|117|121|125) idx=111;;
+					129|133|137|141|145|149|153|157) idx=143;;
+					161|165|169|173|177|181|185|189) idx=175;;
+					193|197|201|205|209|213|217|221) idx=207;;
+				esac
+			else
+				case "$channel" in
+					36|40|44|48|52|56|60|64) idx=50;;
+					100|104|108|112|116|120|124|128) idx=114;;
+				esac
+			fi
 			enable_ac=1
 			vht_oper_chwidth=2
 			vht_center_seg0=$idx
 		;;
 	esac
+	[ "$band" = "6g" ] && {
+		op_class=
+		case "$htmode" in
+			HE20) op_class=131;;
+			HE*) op_class=$((132 + $vht_oper_chwidth))
+		esac
+		[ -n "$op_class" ] && append base_cfg "op_class=$op_class" "$N"
+	}
 	[ "$hwmode" = "a" ] || enable_ac=0
 
 	if [ "$enable_ac" != "0" ]; then
@@ -242,6 +296,8 @@ mac80211_hostapd_setup_base() {
 			mu_beamformee:1 \
 			vht_txop_ps:1 \
 			htc_vht:1 \
+			beamformee_antennas:4 \
+			beamformer_antennas:4 \
 			rx_antenna_pattern:1 \
 			tx_antenna_pattern:1 \
 			vht_max_a_mpdu_len_exp:7 \
@@ -282,6 +338,18 @@ mac80211_hostapd_setup_base() {
 			RX-STBC-123:0x700:0x300:1 \
 			RX-STBC-1234:0x700:0x400:1 \
 
+		[ "$(($vht_cap & 0x800))" -gt 0 -a "$su_beamformer" -gt 0 ] && {
+			cap_ant="$(( ( ($vht_cap >> 16) & 3 ) + 1 ))"
+			[ "$cap_ant" -gt "$beamformer_antennas" ] && cap_ant="$beamformer_antennas"
+			[ "$cap_ant" -gt 1 ] && vht_capab="$vht_capab[SOUNDING-DIMENSION-$cap_ant]"
+		}
+
+		[ "$(($vht_cap & 0x1000))" -gt 0 -a "$su_beamformee" -gt 0 ] && {
+			cap_ant="$(( ( ($vht_cap >> 13) & 3 ) + 1 ))"
+			[ "$cap_ant" -gt "$beamformee_antennas" ] && cap_ant="$beamformee_antennas"
+			[ "$cap_ant" -gt 1 ] && vht_capab="$vht_capab[BF-ANTENNA-$cap_ant]"
+		}
+
 		# supported Channel widths
 		vht160_hw=0
 		[ "$(($vht_cap & 12))" -eq 4 -a 1 -le "$vht160" ] && \
@@ -337,16 +405,62 @@ mac80211_hostapd_setup_base() {
 	esac
 
 	if [ "$enable_ax" != "0" ]; then
+		json_get_vars \
+			he_su_beamformer:1 \
+			he_su_beamformee:0 \
+			he_mu_beamformer:1 \
+			he_twt_required:0 \
+			he_spr_sr_control:0 \
+			he_spr_non_srg_obss_pd_max_offset:1 \
+			he_bss_color
+
+		he_phy_cap=$(iw phy "$phy" info | awk -F "[()]" '/HE PHY Capabilities/ { print $2 }' | head -1)
+		he_phy_cap=${he_phy_cap:2}
+		he_mac_cap=$(iw phy "$phy" info | awk -F "[()]" '/HE MAC Capabilities/ { print $2 }' | head -1)
+		he_mac_cap=${he_mac_cap:2}
+
 		append base_cfg "ieee80211ax=1" "$N"
+		[ -n "$he_bss_color" ] && append base_cfg "he_bss_color=$he_bss_color" "$N"
 		[ "$hwmode" = "a" ] && {
 			append base_cfg "he_oper_chwidth=$vht_oper_chwidth" "$N"
 			append base_cfg "he_oper_centr_freq_seg0_idx=$vht_center_seg0" "$N"
 		}
+
+		mac80211_add_he_capabilities \
+			he_su_beamformer:${he_phy_cap:6:2}:0x80:$he_su_beamformer \
+			he_su_beamformee:${he_phy_cap:8:2}:0x1:$he_su_beamformee \
+			he_mu_beamformer:${he_phy_cap:8:2}:0x2:$he_mu_beamformer \
+			he_spr_sr_control:${he_phy_cap:14:2}:0x1:$he_spr_sr_control \
+			he_twt_required:${he_mac_cap:0:2}:0x6:$he_twt_required
+
+		[ "$he_spr_sr_control" -gt 0 ] && append base_cfg "he_spr_non_srg_obss_pd_max_offset=$he_spr_non_srg_obss_pd_max_offset" "$N"
+
 		append base_cfg "he_default_pe_duration=4" "$N"
 		append base_cfg "he_rts_threshold=1023" "$N"
-		append base_cfg "he_su_beamformer=1" "$N"
-		append base_cfg "he_su_beamformee=1" "$N"
-		append base_cfg "he_mu_beamformer=1" "$N"
+		append base_cfg "he_mu_edca_qos_info_param_count=0" "$N"
+		append base_cfg "he_mu_edca_qos_info_q_ack=0" "$N"
+		append base_cfg "he_mu_edca_qos_info_queue_request=0" "$N"
+		append base_cfg "he_mu_edca_qos_info_txop_request=0" "$N"
+		append base_cfg "he_mu_edca_ac_be_aifsn=8" "$N"
+		append base_cfg "he_mu_edca_ac_be_aci=0" "$N"
+		append base_cfg "he_mu_edca_ac_be_ecwmin=9" "$N"
+		append base_cfg "he_mu_edca_ac_be_ecwmax=10" "$N"
+		append base_cfg "he_mu_edca_ac_be_timer=255" "$N"
+		append base_cfg "he_mu_edca_ac_bk_aifsn=15" "$N"
+		append base_cfg "he_mu_edca_ac_bk_aci=1" "$N"
+		append base_cfg "he_mu_edca_ac_bk_ecwmin=9" "$N"
+		append base_cfg "he_mu_edca_ac_bk_ecwmax=10" "$N"
+		append base_cfg "he_mu_edca_ac_bk_timer=255" "$N"
+		append base_cfg "he_mu_edca_ac_vi_ecwmin=5" "$N"
+		append base_cfg "he_mu_edca_ac_vi_ecwmax=7" "$N"
+		append base_cfg "he_mu_edca_ac_vi_aifsn=5" "$N"
+		append base_cfg "he_mu_edca_ac_vi_aci=2" "$N"
+		append base_cfg "he_mu_edca_ac_vi_timer=255" "$N"
+		append base_cfg "he_mu_edca_ac_vo_aifsn=5" "$N"
+		append base_cfg "he_mu_edca_ac_vo_aci=3" "$N"
+		append base_cfg "he_mu_edca_ac_vo_ecwmin=5" "$N"
+		append base_cfg "he_mu_edca_ac_vo_ecwmax=7" "$N"
+		append base_cfg "he_mu_edca_ac_vo_timer=255" "$N"
 	fi
 
 	hostapd_prepare_device_config "$hostapd_conf_file" nl80211
@@ -528,7 +642,7 @@ mac80211_iw_interface_add() {
 		rc="$?"
 	}
 
-	[ "$rc" != 0 ] && wireless_setup_failed INTERFACE_CREATION_FAILED
+	[ "$rc" != 0 ] && echo "Failed to create interface $ifname"
 	return $rc
 }
 
@@ -689,14 +803,8 @@ mac80211_prepare_iw_htmode() {
 	case "$htmode" in
 		VHT20|HT20) iw_htmode=HT20;;
 		HT40*|VHT40|VHT160)
-			case "$hwmode" in
-				a)
-					case "$(( ($channel / 4) % 2 ))" in
-						1) iw_htmode="HT40+" ;;
-						0) iw_htmode="HT40-";;
-					esac
-				;;
-				*)
+			case "$band" in
+				2g)
 					case "$htmode" in
 						HT40+) iw_htmode="HT40+";;
 						HT40-) iw_htmode="HT40-";;
@@ -709,6 +817,12 @@ mac80211_prepare_iw_htmode() {
 						;;
 					esac
 				;;
+				*)
+					case "$(( ($channel / 4) % 2 ))" in
+						1) iw_htmode="HT40+" ;;
+						0) iw_htmode="HT40-";;
+					esac
+				;;
 			esac
 			[ "$auto_channel" -gt 0 ] && iw_htmode="HT40+"
 		;;
@@ -763,6 +877,7 @@ mac80211_setup_adhoc() {
 	mcval=
 	[ -n "$mcast_rate" ] && wpa_supplicant_add_rate mcval "$mcast_rate"
 
+	iw dev "$ifname" set type ibss
 	iw dev "$ifname" ibss join "$ssid" $freq $iw_htmode fixed-freq $bssid \
 		beacon-interval $beacon_int \
 		${brstr:+basic-rates $brstr} \
@@ -818,7 +933,6 @@ mac80211_setup_vif() {
 		mesh)
 			wireless_vif_parse_encryption
 			[ -z "$htmode" ] && htmode="NOHT";
-			freq="$(get_freq "$phy" "$channel")"
 			if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ] || chan_is_dfs "$phy" "$channel"; then
 				mac80211_setup_supplicant $vif_enable || failed=1
 			else
@@ -832,7 +946,6 @@ mac80211_setup_vif() {
 		adhoc)
 			wireless_vif_parse_encryption
 			if [ "$wpa" -gt 0 -o "$auto_channel" -gt 0 ]; then
-				freq="$(get_freq "$phy" "$channel")"
 				mac80211_setup_supplicant_noctl $vif_enable || failed=1
 			else
 				mac80211_setup_adhoc $vif_enable
@@ -849,10 +962,30 @@ mac80211_setup_vif() {
 
 get_freq() {
 	local phy="$1"
-	local chan="$2"
-	iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
+	local channel="$2"
+	local band="$3"
+
+	case "$band" in
+		2g) band="1:";;
+		5g) band="2:";;
+		60g) band="3:";;
+		6g) band="4:";;
+	esac
+
+	iw "$phy" info | awk -v band="$band" -v channel="[$channel]" '
+
+$1 ~ /Band/ {
+	band_match = band == $2
 }
 
+band_match && $3 == "MHz" && $4 == channel {
+	print $2
+	exit
+}
+'
+}
+
+
 chan_is_dfs() {
 	local phy="$1"
 	local chan="$2"
@@ -907,10 +1040,8 @@ drv_mac80211_setup() {
 		return 1
 	}
 
-	[ -z "$(uci -q -P /var/state show wireless._${phy})" ] && {
-		uci -q -P /var/state set wireless._${phy}=phy
-		wireless_set_data phy="$phy"
-	}
+	wireless_set_data phy="$phy"
+	[ -z "$(uci -q -P /var/state show wireless._${phy})" ] && uci -q -P /var/state set wireless._${phy}=phy
 
 	OLDAPLIST=$(uci -q -P /var/state get wireless._${phy}.aplist)
 	OLDSPLIST=$(uci -q -P /var/state get wireless._${phy}.splist)
@@ -935,7 +1066,7 @@ drv_mac80211_setup() {
 	done
 
 	# convert channel to frequency
-	[ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel")"
+	[ "$auto_channel" -gt 0 ] || freq="$(get_freq "$phy" "$channel" "$band")"
 
 	[ -n "$country" ] && {
 		iw reg get | grep -q "^country $country:" || {
@@ -1003,6 +1134,7 @@ drv_mac80211_setup() {
 	[ -n "$hostapd_ctrl" ] && {
 		local no_reload=1
 		if [ -n "$(ubus list | grep hostapd.$primary_ap)" ]; then
+			no_reload=0
 			[ "${NEW_MD5}" = "${OLD_MD5}" ] || {
 				ubus call hostapd.$primary_ap reload
 				no_reload=$?
@@ -1077,6 +1209,10 @@ drv_mac80211_teardown() {
 	json_select data
 	json_get_vars phy
 	json_select ..
+	[ -n "$phy" ] || {
+		echo "Bug: PHY is undefined for device '$1'"
+		return 1
+	}
 
 	mac80211_interface_cleanup "$phy"
 	uci -q -P /var/state revert wireless._${phy}

package/kernel/mac80211/files/lib/wifi/mac80211.sh

@@ -57,6 +57,85 @@ check_mac80211_device() {
 	[ "$phy" = "$dev" ] && found=1
 }
 
+
+__get_band_defaults() {
+	local phy="$1"
+
+	( iw phy "$phy" info; echo ) | awk '
+BEGIN {
+        bands = ""
+}
+
+($1 == "Band" || $1 == "") && band {
+        if (channel) {
+		mode="NOHT"
+		if (ht) mode="HT20"
+		if (vht && band != "1:") mode="VHT80"
+		if (he) mode="HE80"
+		if (he && band == "1:") mode="HE20"
+                sub("\\[", "", channel)
+                sub("\\]", "", channel)
+                bands = bands band channel ":" mode " "
+        }
+        band=""
+}
+
+$1 == "Band" {
+        band = $2
+        channel = ""
+	vht = ""
+	ht = ""
+	he = ""
+}
+
+$0 ~ "Capabilities:" {
+	ht=1
+}
+
+$0 ~ "VHT Capabilities" {
+	vht=1
+}
+
+$0 ~ "HE Iftypes" {
+	he=1
+}
+
+$1 == "*" && $3 == "MHz" && $0 !~ /disabled/ && band && !channel {
+        channel = $4
+}
+
+END {
+        print bands
+}'
+}
+
+get_band_defaults() {
+	local phy="$1"
+
+	for c in $(__get_band_defaults "$phy"); do
+		local band="${c%%:*}"
+		c="${c#*:}"
+		local chan="${c%%:*}"
+		c="${c#*:}"
+		local mode="${c%%:*}"
+
+		case "$band" in
+			1) band=2g;;
+			2) band=5g;;
+			3) band=60g;;
+			4) band=6g;;
+			*) band="";;
+		esac
+
+		[ -n "$band" ] || continue
+		[ -n "$mode_band" -a "$band" = "6g" ] && return
+
+		mode_band="$band"
+		channel="$chan"
+		htmode="$mode"
+	done
+}
+
 detect_mac80211() {
 	devidx=0
 	config_load wireless
@@ -75,26 +154,12 @@ detect_mac80211() {
 		config_foreach check_mac80211_device wifi-device
 		[ "$found" -gt 0 ] && continue
 
-		mode_band="g"
-		channel="11"
+		mode_band=""
+		channel=""
 		htmode=""
 		ht_capab=""
 
-		iw phy "$dev" info | grep -q 'Capabilities:' && htmode=HT20
-
-		iw phy "$dev" info | grep -q '\* 5... MHz \[' && {
-			mode_band="a"
-			channel=$(iw phy "$dev" info | grep '\* 5... MHz \[' | grep '(disabled)' -v -m 1 | sed 's/[^[]*\[\|\].*//g')
-			iw phy "$dev" info | grep -q 'VHT Capabilities' && htmode="VHT80"
-		}
-
-		iw phy "$dev" info | grep -q '\* 5.... MHz \[' && {
-			mode_band="ad"
-			channel=$(iw phy "$dev" info | grep '\* 5.... MHz \[' | grep '(disabled)' -v -m 1 | sed 's/[^[]*\[\|\|\].*//g')
-			iw phy "$dev" info | grep -q 'Capabilities:' && htmode="HT20"
-		}
-
-		[ -n "$htmode" ] && ht_capab="set wireless.radio${devidx}.htmode=$htmode"
+		get_band_defaults "$dev"
 
 		path="$(mac80211_phy_to_path "$dev")"
 		if [ -n "$path" ]; then
@@ -106,10 +171,10 @@ detect_mac80211() {
 		uci -q batch <<-EOF
 			set wireless.radio${devidx}=wifi-device
 			set wireless.radio${devidx}.type=mac80211
-			set wireless.radio${devidx}.channel=${channel}
-			set wireless.radio${devidx}.hwmode=11${mode_band}
 			${dev_id}
-			${ht_capab}
+			set wireless.radio${devidx}.channel=${channel}
+			set wireless.radio${devidx}.band=${mode_band}
+			set wireless.radio${devidx}.htmode=$htmode
 			set wireless.radio${devidx}.disabled=1
 
 			set wireless.default_radio${devidx}=wifi-iface

package/kernel/mac80211/patches/ath/356-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch

@@ -8,7 +8,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
 
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -2977,7 +2977,8 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2979,7 +2979,8 @@ void ath9k_hw_apply_txpower(struct ath_h
  {
  	struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
  	struct ieee80211_channel *channel;
@@ -18,7 +18,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
  	u16 ctl = NO_CTL;
  
  	if (!chan)
-@@ -2989,9 +2990,14 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2991,9 +2992,14 @@ void ath9k_hw_apply_txpower(struct ath_h
  	channel = chan->chan;
  	chan_pwr = min_t(int, channel->max_power * 2, MAX_COMBINED_POWER);
  	new_pwr = min_t(int, chan_pwr, reg->power_limit);

package/kernel/mac80211/patches/ath/365-ath9k-adjust-tx-power-reduction-for-US-regulatory-do.patch

@@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -2996,6 +2996,10 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2998,6 +2998,10 @@ void ath9k_hw_apply_txpower(struct ath_h
  	if (ant_gain > max_gain)
  		ant_reduction = ant_gain - max_gain;
  

package/kernel/mac80211/patches/ath/400-ath_move_debug_code.patch

@@ -14,7 +14,7 @@
  CFLAGS_trace.o := -I$(src)
 --- a/drivers/net/wireless/ath/ath.h
 +++ b/drivers/net/wireless/ath/ath.h
-@@ -316,14 +316,7 @@ void _ath_dbg(struct ath_common *common,
+@@ -317,14 +317,7 @@ void _ath_dbg(struct ath_common *common,
  #endif /* CPTCFG_ATH_DEBUG */
  
  /** Returns string describing opmode, or NULL if unknown mode. */

package/kernel/mac80211/patches/ath/500-ath9k_eeprom_debugfs.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/debug.c
 +++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1361,6 +1361,53 @@ void ath9k_deinit_debug(struct ath_softc
+@@ -1364,6 +1364,53 @@ void ath9k_deinit_debug(struct ath_softc
  	ath9k_cmn_spectral_deinit_debug(&sc->spec_priv);
  }
  
@@ -54,7 +54,7 @@
  int ath9k_init_debug(struct ath_hw *ah)
  {
  	struct ath_common *common = ath9k_hw_common(ah);
-@@ -1380,6 +1427,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1383,6 +1430,8 @@ int ath9k_init_debug(struct ath_hw *ah)
  	ath9k_tx99_init_debug(sc);
  	ath9k_cmn_spectral_init_debug(&sc->spec_priv, sc->debug.debugfs_phy);
  

package/kernel/mac80211/patches/ath/512-ath9k_channelbw_debugfs.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/debug.c
 +++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1408,6 +1408,52 @@ static const struct file_operations fops
+@@ -1411,6 +1411,52 @@ static const struct file_operations fops
  	.owner = THIS_MODULE
  };
  
@@ -53,7 +53,7 @@
  int ath9k_init_debug(struct ath_hw *ah)
  {
  	struct ath_common *common = ath9k_hw_common(ah);
-@@ -1429,6 +1475,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1432,6 +1478,8 @@ int ath9k_init_debug(struct ath_hw *ah)
  
  	debugfs_create_file("eeprom", S_IRUSR, sc->debug.debugfs_phy, sc,
  			    &fops_eeprom);

package/kernel/mac80211/patches/ath/530-ath9k_extra_leds.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/ath9k.h
 +++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -843,6 +843,9 @@ static inline int ath9k_dump_btcoex(stru
+@@ -844,6 +844,9 @@ static inline int ath9k_dump_btcoex(stru
  #ifdef CPTCFG_MAC80211_LEDS
  void ath_init_leds(struct ath_softc *sc);
  void ath_deinit_leds(struct ath_softc *sc);
@@ -10,7 +10,7 @@
  #else
  static inline void ath_init_leds(struct ath_softc *sc)
  {
-@@ -979,6 +982,13 @@ void ath_ant_comb_scan(struct ath_softc
+@@ -980,6 +983,13 @@ void ath_ant_comb_scan(struct ath_softc
  
  #define ATH9K_NUM_CHANCTX  2 /* supports 2 operating channels */
  
@@ -24,7 +24,7 @@
  struct ath_softc {
  	struct ieee80211_hw *hw;
  	struct device *dev;
-@@ -1032,9 +1042,8 @@ struct ath_softc {
+@@ -1033,9 +1043,8 @@ struct ath_softc {
  	spinlock_t chan_lock;
  
  #ifdef CPTCFG_MAC80211_LEDS
@@ -192,7 +192,7 @@
  #endif
 --- a/drivers/net/wireless/ath/ath9k/debug.c
 +++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1453,6 +1453,61 @@ static const struct file_operations fops
+@@ -1456,6 +1456,61 @@ static const struct file_operations fops
  	.llseek = default_llseek,
  };
  
@@ -254,7 +254,7 @@
  
  int ath9k_init_debug(struct ath_hw *ah)
  {
-@@ -1477,6 +1532,10 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1480,6 +1535,10 @@ int ath9k_init_debug(struct ath_hw *ah)
  			    &fops_eeprom);
  	debugfs_create_file("chanbw", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
  			    sc, &fops_chanbw);

package/kernel/mac80211/patches/ath/542-ath9k_debugfs_diag.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath9k/debug.c
 +++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -1509,6 +1509,50 @@ static const struct file_operations fops
+@@ -1512,6 +1512,50 @@ static const struct file_operations fops
  #endif
  
  
@@ -51,7 +51,7 @@
  int ath9k_init_debug(struct ath_hw *ah)
  {
  	struct ath_common *common = ath9k_hw_common(ah);
-@@ -1536,6 +1580,8 @@ int ath9k_init_debug(struct ath_hw *ah)
+@@ -1539,6 +1583,8 @@ int ath9k_init_debug(struct ath_hw *ah)
  	debugfs_create_file("gpio_led", S_IWUSR,
  			   sc->debug.debugfs_phy, sc, &fops_gpio_led);
  #endif
@@ -84,7 +84,7 @@
  	bool reset_power_on;
  	bool htc_reset_init;
  
-@@ -1076,6 +1084,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
+@@ -1077,6 +1085,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
  bool ath9k_hw_check_alive(struct ath_hw *ah);
  
  bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
@@ -94,7 +94,7 @@
  struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1883,6 +1883,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
+@@ -1882,6 +1882,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
  }
  EXPORT_SYMBOL(ath9k_hw_get_tsf_offset);
  
@@ -115,7 +115,7 @@
  int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
  		   struct ath9k_hw_cal_data *caldata, bool fastcc)
  {
-@@ -2091,6 +2105,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -2090,6 +2104,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
  		ar9003_hw_disable_phy_restart(ah);
  
  	ath9k_hw_apply_gpio_override(ah);
@@ -125,9 +125,9 @@
  		REG_SET_BIT(ah, AR_BTCOEX_WL_LNADIV, AR_BTCOEX_WL_LNADIV_FORCE_ON);
 --- a/drivers/net/wireless/ath/ath9k/main.c
 +++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -531,6 +531,11 @@ irqreturn_t ath_isr(int irq, void *dev)
- 	if (test_bit(ATH_OP_HW_RESET, &common->op_flags))
+@@ -538,6 +538,11 @@ irqreturn_t ath_isr(int irq, void *dev)
  		return IRQ_HANDLED;
+ 	}
  
 +	if (test_bit(ATH_DIAG_TRIGGER_ERROR, &ah->diag)) {
 +		status |= ATH9K_INT_FATAL;

package/kernel/mac80211/patches/ath/544-ath9k-ar933x-usb-hang-workaround.patch

@@ -40,7 +40,7 @@
  	return true;
  }
  
-@@ -1861,8 +1880,14 @@ static int ath9k_hw_do_fastcc(struct ath
+@@ -1860,8 +1879,14 @@ static int ath9k_hw_do_fastcc(struct ath
  	if (AR_SREV_9271(ah))
  		ar9002_hw_load_ani_reg(ah, chan);
  
@@ -55,7 +55,7 @@
  	return -EINVAL;
  }
  
-@@ -2116,6 +2141,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -2115,6 +2140,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
  		ath9k_hw_set_radar_params(ah);
  	}
  

package/kernel/mac80211/patches/ath/548-ath9k_enable_gpio_chip.patch

@@ -18,7 +18,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  #include "common.h"
  #include "debug.h"
-@@ -989,6 +990,14 @@ struct ath_led {
+@@ -990,6 +991,14 @@ struct ath_led {
  	struct led_classdev cdev;
  };
  
@@ -33,7 +33,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  struct ath_softc {
  	struct ieee80211_hw *hw;
  	struct device *dev;
-@@ -1044,6 +1053,9 @@ struct ath_softc {
+@@ -1045,6 +1054,9 @@ struct ath_softc {
  #ifdef CPTCFG_MAC80211_LEDS
  	const char *led_default_trigger;
  	struct list_head leds;

package/kernel/mac80211/patches/ath/549-ath9k_enable_gpio_buttons.patch

@@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 ---
 --- a/drivers/net/wireless/ath/ath9k/ath9k.h
 +++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -1055,6 +1055,7 @@ struct ath_softc {
+@@ -1056,6 +1056,7 @@ struct ath_softc {
  	struct list_head leds;
  #ifdef CONFIG_GPIOLIB
  	struct ath9k_gpio_chip *gpiochip;

package/kernel/mac80211/patches/ath/551-ath9k_ubnt_uap_plus_hsr.patch

@@ -339,7 +339,7 @@
  
  static void ath9k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
  			u32 queues, bool drop);
-@@ -652,6 +653,7 @@ void ath_reset_work(struct work_struct *
+@@ -659,6 +660,7 @@ void ath_reset_work(struct work_struct *
  static int ath9k_start(struct ieee80211_hw *hw)
  {
  	struct ath_softc *sc = hw->priv;
@@ -347,7 +347,7 @@
  	struct ath_hw *ah = sc->sc_ah;
  	struct ath_common *common = ath9k_hw_common(ah);
  	struct ieee80211_channel *curchan = sc->cur_chan->chandef.chan;
-@@ -730,6 +732,11 @@ static int ath9k_start(struct ieee80211_
+@@ -737,6 +739,11 @@ static int ath9k_start(struct ieee80211_
  					  AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
  	}
  
@@ -381,7 +381,7 @@
  ATH9K_HTC_DEBUGFS=
 --- a/drivers/net/wireless/ath/ath9k/Kconfig
 +++ b/drivers/net/wireless/ath/ath9k/Kconfig
-@@ -60,6 +60,19 @@ config ATH9K_AHB
+@@ -58,6 +58,19 @@ config ATH9K_AHB
  	  Say Y, if you have a SoC with a compatible built-in
  	  wireless MAC. Say N if unsure.
  

package/kernel/mac80211/patches/ath/552-ahb_of.patch

@@ -325,7 +325,7 @@
  
  #include "common.h"
  #include "debug.h"
-@@ -1011,6 +1012,9 @@ struct ath_softc {
+@@ -1012,6 +1013,9 @@ struct ath_softc {
  	struct ath_hw *sc_ah;
  	void __iomem *mem;
  	int irq;

package/kernel/mac80211/patches/ath/560-ath9k-fix-transmitting-to-stations-in-dynamic-SMPS-m.patch

@@ -1,49 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 14 Feb 2021 19:45:50 +0100
-Subject: [PATCH] ath9k: fix transmitting to stations in dynamic SMPS mode
-
-When transmitting to a receiver in dynamic SMPS mode, all transmissions that
-use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to
-give the receiver's extra chains some time to wake up.
-This fixes the tx rate getting stuck at <= MCS7 for some clients, especially
-Intel ones, which make aggressive use of SMPS.
-
-Cc: stable@vger.kernel.org
-Reported-by: Martin Kennedy <hurricos@gmail.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -179,7 +179,8 @@ struct ath_frame_info {
- 	s8 txq;
- 	u8 keyix;
- 	u8 rtscts_rate;
--	u8 retries : 7;
-+	u8 retries : 6;
-+	u8 dyn_smps : 1;
- 	u8 baw_tracked : 1;
- 	u8 tx_power;
- 	enum ath9k_key_type keytype:2;
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -1271,6 +1271,11 @@ static void ath_buf_set_rate(struct ath_
- 				 is_40, is_sgi, is_sp);
- 			if (rix < 8 && (tx_info->flags & IEEE80211_TX_CTL_STBC))
- 				info->rates[i].RateFlags |= ATH9K_RATESERIES_STBC;
-+			if (rix >= 8 && fi->dyn_smps) {
-+				info->rates[i].RateFlags |=
-+					ATH9K_RATESERIES_RTS_CTS;
-+				info->flags |= ATH9K_TXDESC_CTSENA;
-+			}
- 
- 			info->txpower[i] = ath_get_rate_txpower(sc, bf, rix,
- 								is_40, false);
-@@ -2114,6 +2119,7 @@ static void setup_frame_info(struct ieee
- 		fi->keyix = an->ps_key;
- 	else
- 		fi->keyix = ATH9K_TXKEYIX_INVALID;
-+	fi->dyn_smps = sta && sta->smps_mode == IEEE80211_SMPS_DYNAMIC;
- 	fi->keytype = keytype;
- 	fi->framelen = framelen;
- 	fi->tx_power = txpower;

package/kernel/mac80211/patches/ath/922-ath10k-increase-rx-buffer-size-to-2048.patch

@@ -26,7 +26,7 @@ Forwarded: https://patchwork.kernel.org/patch/11367055/
 
 --- a/drivers/net/wireless/ath/ath10k/htt.h
 +++ b/drivers/net/wireless/ath/ath10k/htt.h
-@@ -2242,7 +2242,7 @@ struct htt_rx_chan_info {
+@@ -2243,7 +2243,7 @@ struct htt_rx_chan_info {
   * Should be: sizeof(struct htt_host_rx_desc) + max rx MSDU size,
   * rounded up to a cache line size.
   */

package/kernel/mac80211/patches/ath/930-ath10k_add_tpt_led_trigger.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -9713,6 +9713,21 @@ static int ath10k_mac_init_rd(struct ath
+@@ -9732,6 +9732,21 @@ static int ath10k_mac_init_rd(struct ath
  	return 0;
  }
  
@@ -22,7 +22,7 @@
  int ath10k_mac_register(struct ath10k *ar)
  {
  	static const u32 cipher_suites[] = {
-@@ -10062,6 +10077,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10081,6 +10096,12 @@ int ath10k_mac_register(struct ath10k *a
  
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  

package/kernel/mac80211/patches/ath/974-ath10k_add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -456,7 +456,7 @@ v13:
  {
 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
 +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
-@@ -4585,6 +4585,8 @@ static const struct wmi_ops wmi_tlv_ops
+@@ -4594,6 +4594,8 @@ static const struct wmi_ops wmi_tlv_ops
  	.gen_echo = ath10k_wmi_tlv_op_gen_echo,
  	.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
  	.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
@@ -467,7 +467,7 @@ v13:
  static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
 --- a/drivers/net/wireless/ath/ath10k/wmi.c
 +++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -7468,6 +7468,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
+@@ -7472,6 +7472,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
  	return skb;
  }
  
@@ -517,7 +517,7 @@ v13:
  static struct sk_buff *
  ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
  			     enum wmi_sta_ps_mode psmode)
-@@ -9156,6 +9199,9 @@ static const struct wmi_ops wmi_ops = {
+@@ -9160,6 +9203,9 @@ static const struct wmi_ops wmi_ops = {
  	.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
  	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
  	.gen_echo = ath10k_wmi_op_gen_echo,
@@ -527,7 +527,7 @@ v13:
  	/* .gen_bcn_tmpl not implemented */
  	/* .gen_prb_tmpl not implemented */
  	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9226,6 +9272,8 @@ static const struct wmi_ops wmi_10_1_ops
+@@ -9230,6 +9276,8 @@ static const struct wmi_ops wmi_10_1_ops
  	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
  	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
  	.gen_echo = ath10k_wmi_op_gen_echo,
@@ -536,7 +536,7 @@ v13:
  	/* .gen_bcn_tmpl not implemented */
  	/* .gen_prb_tmpl not implemented */
  	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9298,6 +9346,8 @@ static const struct wmi_ops wmi_10_2_ops
+@@ -9302,6 +9350,8 @@ static const struct wmi_ops wmi_10_2_ops
  	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
  	.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
  	.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
@@ -545,7 +545,7 @@ v13:
  	/* .gen_pdev_enable_adaptive_cca not implemented */
  };
  
-@@ -9369,6 +9419,8 @@ static const struct wmi_ops wmi_10_2_4_o
+@@ -9373,6 +9423,8 @@ static const struct wmi_ops wmi_10_2_4_o
  		ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
  	.get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
  	.gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing,
@@ -554,7 +554,7 @@ v13:
  	/* .gen_bcn_tmpl not implemented */
  	/* .gen_prb_tmpl not implemented */
  	/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9450,6 +9502,8 @@ static const struct wmi_ops wmi_10_4_ops
+@@ -9454,6 +9506,8 @@ static const struct wmi_ops wmi_10_4_ops
  	.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
  	.gen_echo = ath10k_wmi_op_gen_echo,
  	.gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
@@ -565,7 +565,7 @@ v13:
  int ath10k_wmi_attach(struct ath10k *ar)
 --- a/drivers/net/wireless/ath/ath10k/wmi.h
 +++ b/drivers/net/wireless/ath/ath10k/wmi.h
-@@ -3027,6 +3027,41 @@ enum wmi_10_4_feature_mask {
+@@ -3030,6 +3030,41 @@ enum wmi_10_4_feature_mask {
  
  };
  

package/kernel/mac80211/patches/ath/975-ath10k-use-tpt-trigger-by-default.patch

@@ -42,7 +42,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	if (ret)
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -10079,7 +10079,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10098,7 +10098,7 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  
  #ifdef CPTCFG_MAC80211_LEDS

package/kernel/mac80211/patches/ath/980-ath10k-fix-max-antenna-gain-unit.patch

@@ -1,49 +0,0 @@
-From: Sven Eckelmann <seckelmann@datto.com>
-Date: Tue, 11 Jun 2019 13:58:35 +0200
-Subject: ath10k: fix max antenna gain unit
-
-Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB
-steps). This isn't the case for max_antenna_gain - which is still expected
-by the firmware as dB.
-
-The firmware is converting it from dB to the internal (twicepower)
-representation when it calculates the limits of a channel. This can be seen
-in tpc_stats when configuring "12" as max_antenna_gain. Instead of the
-expected 12 (6 dB), the tpc_stats shows 24 (12 dB).
-
-Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057.
-
-Fixes: 02256930d9b8 ("ath10k: use proper tx power unit")
-Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
-
-Forwarded: https://patchwork.kernel.org/patch/10986723/
-
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -1038,7 +1038,7 @@ static int ath10k_monitor_vdev_start(str
- 	arg.channel.min_power = 0;
- 	arg.channel.max_power = channel->max_power * 2;
- 	arg.channel.max_reg_power = channel->max_reg_power * 2;
--	arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
-+	arg.channel.max_antenna_gain = channel->max_antenna_gain;
- 
- 	reinit_completion(&ar->vdev_setup_done);
- 	reinit_completion(&ar->vdev_delete_done);
-@@ -1484,7 +1484,7 @@ static int ath10k_vdev_start_restart(str
- 	arg.channel.min_power = 0;
- 	arg.channel.max_power = chandef->chan->max_power * 2;
- 	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
--	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;
-+	arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain;
- 
- 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
- 		arg.ssid = arvif->u.ap.ssid;
-@@ -3255,7 +3255,7 @@ static int ath10k_update_channel_list(st
- 			ch->min_power = 0;
- 			ch->max_power = channel->max_power * 2;
- 			ch->max_reg_power = channel->max_reg_power * 2;
--			ch->max_antenna_gain = channel->max_antenna_gain * 2;
-+			ch->max_antenna_gain = channel->max_antenna_gain;
- 			ch->reg_class_id = 0; /* FIXME */
- 
- 			/* FIXME: why use only legacy modes, why not any

package/kernel/mac80211/patches/ath/981-ath10k-adjust-tx-power-reduction-for-US-regulatory-d.patch

@@ -28,7 +28,7 @@ Forwarded: no
 
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -1006,6 +1006,40 @@ static inline int ath10k_vdev_setup_sync
+@@ -1010,6 +1010,40 @@ static inline int ath10k_vdev_setup_sync
  	return ar->last_wmi_vdev_start_status;
  }
  
@@ -69,7 +69,7 @@ Forwarded: no
  static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
  {
  	struct cfg80211_chan_def *chandef = NULL;
-@@ -1038,7 +1072,8 @@ static int ath10k_monitor_vdev_start(str
+@@ -1042,7 +1076,8 @@ static int ath10k_monitor_vdev_start(str
  	arg.channel.min_power = 0;
  	arg.channel.max_power = channel->max_power * 2;
  	arg.channel.max_reg_power = channel->max_reg_power * 2;
@@ -79,7 +79,7 @@ Forwarded: no
  
  	reinit_completion(&ar->vdev_setup_done);
  	reinit_completion(&ar->vdev_delete_done);
-@@ -1484,7 +1519,8 @@ static int ath10k_vdev_start_restart(str
+@@ -1488,7 +1523,8 @@ static int ath10k_vdev_start_restart(str
  	arg.channel.min_power = 0;
  	arg.channel.max_power = chandef->chan->max_power * 2;
  	arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
@@ -89,7 +89,7 @@ Forwarded: no
  
  	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
  		arg.ssid = arvif->u.ap.ssid;
-@@ -3255,7 +3291,8 @@ static int ath10k_update_channel_list(st
+@@ -3259,7 +3295,8 @@ static int ath10k_update_channel_list(st
  			ch->min_power = 0;
  			ch->max_power = channel->max_power * 2;
  			ch->max_reg_power = channel->max_reg_power * 2;

package/kernel/mac80211/patches/ath/990-ath10k-small-buffers.patch

@@ -0,0 +1,64 @@
+--- a/drivers/net/wireless/ath/ath10k/htt.h
++++ b/drivers/net/wireless/ath/ath10k/htt.h
+@@ -235,7 +235,11 @@ enum htt_rx_ring_flags {
+ };
+ 
+ #define HTT_RX_RING_SIZE_MIN 128
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ #define HTT_RX_RING_SIZE_MAX 2048
++#else
++#define HTT_RX_RING_SIZE_MAX 512
++#endif
+ #define HTT_RX_RING_SIZE HTT_RX_RING_SIZE_MAX
+ #define HTT_RX_RING_FILL_LEVEL (((HTT_RX_RING_SIZE) / 2) - 1)
+ #define HTT_RX_RING_FILL_LEVEL_DUAL_MAC (HTT_RX_RING_SIZE - 1)
+--- a/drivers/net/wireless/ath/ath10k/pci.c
++++ b/drivers/net/wireless/ath/ath10k/pci.c
+@@ -131,7 +131,11 @@ static const struct ce_attr pci_host_ce_
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 2048,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 512,
++#else
++		.dest_nentries = 128,
++#endif
+ 		.recv_cb = ath10k_pci_htt_htc_rx_cb,
+ 	},
+ 
+@@ -140,7 +144,11 @@ static const struct ce_attr pci_host_ce_
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 2048,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 128,
++#else
++		.dest_nentries = 64,
++#endif
+ 		.recv_cb = ath10k_pci_htc_rx_cb,
+ 	},
+ 
+@@ -167,7 +175,11 @@ static const struct ce_attr pci_host_ce_
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 512,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 512,
++#else
++		.dest_nentries = 128,
++#endif
+ 		.recv_cb = ath10k_pci_htt_rx_cb,
+ 	},
+ 
+@@ -192,7 +204,11 @@ static const struct ce_attr pci_host_ce_
+ 		.flags = CE_ATTR_FLAGS,
+ 		.src_nentries = 0,
+ 		.src_sz_max = 2048,
++#ifndef CONFIG_ATH10K_SMALLBUFFERS
+ 		.dest_nentries = 128,
++#else
++		.dest_nentries = 96,
++#endif
+ 		.recv_cb = ath10k_pci_pktlog_rx_cb,
+ 	},
+ 

package/kernel/mac80211/patches/brcm/860-brcmfmac-register-wiphy-s-during-module_init.patch

@@ -11,16 +11,6 @@ module loads successfully.
 Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
 ---
 
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1557,6 +1557,7 @@ int __init brcmf_core_init(void)
- {
- 	if (!schedule_work(&brcmf_driver_work))
- 		return -EBUSY;
-+	flush_work(&brcmf_driver_work);
- 
- 	return 0;
- }
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
 @@ -431,6 +431,7 @@ struct brcmf_fw {

package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch

@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2958,6 +2958,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
+@@ -2961,6 +2961,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
  	 * preference in cfg struct to apply this to
  	 * FW later while initializing the dongle
  	 */

package/kernel/mac80211/patches/brcm/998-survey.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2910,6 +2910,63 @@ done:
+@@ -2913,6 +2913,63 @@ done:
  }
  
  static int
@@ -64,7 +64,7 @@
  brcmf_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *ndev,
  			    int idx, u8 *mac, struct station_info *sinfo)
  {
-@@ -3005,6 +3062,7 @@ static s32 brcmf_inform_single_bss(struc
+@@ -3008,6 +3065,7 @@ static s32 brcmf_inform_single_bss(struc
  	struct brcmu_chan ch;
  	u16 channel;
  	u32 freq;
@@ -72,7 +72,7 @@
  	u16 notify_capability;
  	u16 notify_interval;
  	u8 *notify_ie;
-@@ -3029,6 +3087,17 @@ static s32 brcmf_inform_single_bss(struc
+@@ -3032,6 +3090,17 @@ static s32 brcmf_inform_single_bss(struc
  		band = NL80211_BAND_5GHZ;
  
  	freq = ieee80211_channel_to_frequency(channel, band);
@@ -90,7 +90,7 @@
  	bss_data.chan = ieee80211_get_channel(wiphy, freq);
  	bss_data.scan_width = NL80211_BSS_CHAN_WIDTH_20;
  	bss_data.boottime_ns = ktime_to_ns(ktime_get_boottime());
-@@ -5515,6 +5584,7 @@ static struct cfg80211_ops brcmf_cfg8021
+@@ -5518,6 +5587,7 @@ static struct cfg80211_ops brcmf_cfg8021
  	.leave_ibss = brcmf_cfg80211_leave_ibss,
  	.get_station = brcmf_cfg80211_get_station,
  	.dump_station = brcmf_cfg80211_dump_station,

package/kernel/mac80211/patches/build/001-fix_build.patch

@@ -55,8 +55,8 @@
 -				echo ""							;\
 -			done								\
 -		) > Kconfig.kernel							;\
--		kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion |	\
--			sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d')		;\
+-		kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) M=$(BACKPORT_DIR)	\
+-			kernelversion |	sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d');\
 -		test "$$kver" != "" || echo "Kernel version parse failed!"		;\
 -		test "$$kver" != ""							;\
 -		kvers="$$(seq 14 39 | sed 's/^/2.6./')"					;\
@@ -112,8 +112,8 @@
 +	@echo " done."
 +
 +Kconfig.versions: Kconfig.kernel
-+	@kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) kernelversion |	\
-+		sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d')		;\
++	@kver=$$($(MAKE) --no-print-directory -C $(KLIB_BUILD) M=$(BACKPORT_DIR) \
++		kernelversion |	sed 's/^\(\([3-5]\|2\.6\)\.[0-9]\+\).*/\1/;t;d');\
 +	test "$$kver" != "" || echo "Kernel version parse failed!"		;\
 +	test "$$kver" != ""							;\
 +	kvers="$$(seq 14 39 | sed 's/^/2.6./')"					;\

package/kernel/mac80211/patches/mwl/700-mwl8k-missing-pci-id-for-WNR854T.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/marvell/mwl8k.c
 +++ b/drivers/net/wireless/marvell/mwl8k.c
-@@ -5694,6 +5694,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
+@@ -5695,6 +5695,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
  MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API));
  
  static const struct pci_device_id mwl8k_pci_id_table[] = {

package/kernel/mac80211/patches/mwl/940-mwl8k_init_devices_synchronously.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/marvell/mwl8k.c
 +++ b/drivers/net/wireless/marvell/mwl8k.c
-@@ -6279,6 +6279,8 @@ static int mwl8k_probe(struct pci_dev *p
+@@ -6280,6 +6280,8 @@ static int mwl8k_probe(struct pci_dev *p
  
  	priv->running_bsses = 0;
  
@@ -9,7 +9,7 @@
  	return rc;
  
  err_stop_firmware:
-@@ -6312,8 +6314,6 @@ static void mwl8k_remove(struct pci_dev
+@@ -6313,8 +6315,6 @@ static void mwl8k_remove(struct pci_dev
  		return;
  	priv = hw->priv;
  

package/kernel/mac80211/patches/rtl/002-v5.13-rtlwifi-implement-set_tim-by-update-beacon-content.patch

@@ -0,0 +1,118 @@
+Date: Mon, 19 Apr 2021 14:59:56 +0800
+From: Ping-Ke Shih <pkshih@realtek.com>
+To: <kvalo@codeaurora.org>
+CC: <linux-wireless@vger.kernel.org>, <mail@maciej.szmigiero.name>,
+        <Larry.Finger@lwfinger.net>
+Subject: [PATCH] rtlwifi: implement set_tim by update beacon content
+
+Once beacon content is changed, we update the content to wifi card by
+send_beacon_frame(). Then, STA with PS can wake up properly to receive its
+packets.
+
+Since we update beacon content to PCI wifi devices every beacon interval,
+the only one usb device, 8192CU, needs to update beacon content when
+mac80211 calling set_tim.
+
+Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
+Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
+Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
+---
+ drivers/net/wireless/realtek/rtlwifi/core.c | 32 +++++++++++++++++++++
+ drivers/net/wireless/realtek/rtlwifi/core.h |  1 +
+ drivers/net/wireless/realtek/rtlwifi/usb.c  |  3 ++
+ drivers/net/wireless/realtek/rtlwifi/wifi.h |  1 +
+ 4 files changed, 37 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtlwifi/core.c
++++ b/drivers/net/wireless/realtek/rtlwifi/core.c
+@@ -1018,6 +1018,25 @@ static void send_beacon_frame(struct iee
+ 	}
+ }
+ 
++void rtl_update_beacon_work_callback(struct work_struct *work)
++{
++	struct rtl_works *rtlworks =
++	    container_of(work, struct rtl_works, update_beacon_work);
++	struct ieee80211_hw *hw = rtlworks->hw;
++	struct rtl_priv *rtlpriv = rtl_priv(hw);
++	struct ieee80211_vif *vif = rtlpriv->mac80211.vif;
++
++	if (!vif) {
++		WARN_ONCE(true, "no vif to update beacon\n");
++		return;
++	}
++
++	mutex_lock(&rtlpriv->locks.conf_mutex);
++	send_beacon_frame(hw, vif);
++	mutex_unlock(&rtlpriv->locks.conf_mutex);
++}
++EXPORT_SYMBOL_GPL(rtl_update_beacon_work_callback);
++
+ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
+ 				    struct ieee80211_vif *vif,
+ 				    struct ieee80211_bss_conf *bss_conf,
+@@ -1747,6 +1766,18 @@ static void rtl_op_flush(struct ieee8021
+ 		rtlpriv->intf_ops->flush(hw, queues, drop);
+ }
+ 
++static int rtl_op_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
++			  bool set)
++{
++	struct rtl_priv *rtlpriv = rtl_priv(hw);
++	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
++
++	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192CU)
++		schedule_work(&rtlpriv->works.update_beacon_work);
++
++	return 0;
++}
++
+ /*	Description:
+  *		This routine deals with the Power Configuration CMD
+  *		 parsing for RTL8723/RTL8188E Series IC.
+@@ -1903,6 +1934,7 @@ const struct ieee80211_ops rtl_ops = {
+ 	.sta_add = rtl_op_sta_add,
+ 	.sta_remove = rtl_op_sta_remove,
+ 	.flush = rtl_op_flush,
++	.set_tim = rtl_op_set_tim,
+ };
+ EXPORT_SYMBOL_GPL(rtl_ops);
+ 
+--- a/drivers/net/wireless/realtek/rtlwifi/core.h
++++ b/drivers/net/wireless/realtek/rtlwifi/core.h
+@@ -60,5 +60,6 @@ void rtl_bb_delay(struct ieee80211_hw *h
+ bool rtl_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb);
+ bool rtl_btc_status_false(void);
+ void rtl_dm_diginit(struct ieee80211_hw *hw, u32 cur_igval);
++void rtl_update_beacon_work_callback(struct work_struct *work);
+ 
+ #endif
+--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
++++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
+@@ -807,6 +807,7 @@ static void rtl_usb_stop(struct ieee8021
+ 
+ 	tasklet_kill(&rtlusb->rx_work_tasklet);
+ 	cancel_work_sync(&rtlpriv->works.lps_change_work);
++	cancel_work_sync(&rtlpriv->works.update_beacon_work);
+ 
+ 	flush_workqueue(rtlpriv->works.rtl_wq);
+ 
+@@ -1033,6 +1034,8 @@ int rtl_usb_probe(struct usb_interface *
+ 		  rtl_fill_h2c_cmd_work_callback);
+ 	INIT_WORK(&rtlpriv->works.lps_change_work,
+ 		  rtl_lps_change_work_callback);
++	INIT_WORK(&rtlpriv->works.update_beacon_work,
++		  rtl_update_beacon_work_callback);
+ 
+ 	rtlpriv->usb_data_index = 0;
+ 	init_completion(&rtlpriv->firmware_loading_complete);
+--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
++++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
+@@ -2487,6 +2487,7 @@ struct rtl_works {
+ 
+ 	struct work_struct lps_change_work;
+ 	struct work_struct fill_h2c_cmd;
++	struct work_struct update_beacon_work;
+ };
+ 
+ struct rtl_debug {

package/kernel/mac80211/patches/subsys/010-sync-nl80211_h.patch

@@ -0,0 +1,297 @@
+--- a/include/uapi/linux/nl80211.h
++++ b/include/uapi/linux/nl80211.h
+@@ -655,6 +655,9 @@
+  *	When a security association was established on an 802.1X network using
+  *	fast transition, this event should be followed by an
+  *	%NL80211_CMD_PORT_AUTHORIZED event.
++ *	Following a %NL80211_CMD_ROAM event userspace can issue
++ *	%NL80211_CMD_GET_SCAN in order to obtain the scan information for the
++ *	new BSS the card/driver roamed to.
+  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+  *	userspace that a connection was dropped by the AP or due to other
+  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+@@ -757,7 +760,8 @@
+  *	of any other interfaces, and other interfaces will again take
+  *	precedence when they are used.
+  *
+- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
++ *	(no longer supported).
+  *
+  * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+  *	multicast to unicast conversion. When enabled, all multicast packets
+@@ -1177,6 +1181,10 @@
+  *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+  *	if the recipient acknowledged the frame.
+  *
++ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
++ *	passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
++ *	specify the wiphy index to be applied to.
++ *
+  * @NL80211_CMD_MAX: highest used command number
+  * @__NL80211_CMD_AFTER_LAST: internal use
+  */
+@@ -1407,6 +1415,8 @@ enum nl80211_commands {
+ 
+ 	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+ 
++	NL80211_CMD_SET_SAR_SPECS,
++
+ 	/* add new commands above here */
+ 
+ 	/* used to define NL80211_CMD_MAX below */
+@@ -1750,8 +1760,9 @@ enum nl80211_commands {
+  *	specify just a single bitrate, which is to be used for the beacon.
+  *	The driver must also specify support for this with the extended
+  *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
+- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HT,
++ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT and
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HE.
+  *
+  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+@@ -1955,8 +1966,15 @@ enum nl80211_commands {
+  * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+  *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+  *	to be filled by the FW.
+- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
+- *      this feature.  Currently, only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
+  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+  *      ATTR_HT_CAPABILITY to which attention should be paid.
+  *      Currently, only mac80211 NICs support this feature.
+@@ -2077,7 +2095,8 @@ enum nl80211_commands {
+  *	until the channel switch event.
+  * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+  *	must be blocked on the current channel (before the channel switch
+- *	operation).
++ *	operation). Also included in the channel switch started event if quiet
++ *	was requested by the AP.
+  * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+  *	for the time while performing a channel switch.
+  * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
+@@ -2527,6 +2546,20 @@ enum nl80211_commands {
+  *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+  *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+  *
++ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
++ *	derivation in WPA3-Personal networks which are using SAE authentication.
++ *	This is a u8 attribute that encapsulates one of the values from
++ *	&enum nl80211_sae_pwe_mechanism.
++ *
++ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
++ *	used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
++ *	of %nl80211_sar_attrs which specifies the sar type and related
++ *	sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
++ *
++ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
++ *	disassoc events to indicate that an immediate reconnect to the AP
++ *	is desired.
++ *
+  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
+  * @NL80211_ATTR_MAX: highest attribute number currently defined
+  * @__NL80211_ATTR_AFTER_LAST: internal use
+@@ -3016,6 +3049,14 @@ enum nl80211_attrs {
+ 	NL80211_ATTR_S1G_CAPABILITY,
+ 	NL80211_ATTR_S1G_CAPABILITY_MASK,
+ 
++	NL80211_ATTR_SAE_PWE,
++
++	NL80211_ATTR_RECONNECT_REQUESTED,
++
++	NL80211_ATTR_SAR_SPEC,
++
++	NL80211_ATTR_DISABLE_HE,
++
+ 	/* add attributes here, update the policy in nl80211.c */
+ 
+ 	__NL80211_ATTR_AFTER_LAST,
+@@ -5896,6 +5937,19 @@ enum nl80211_feature_flags {
+  * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+  *	unsolicited broadcast probe response transmission
+  *
++ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
++ *	configuration (AP/mesh) with HE rates.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
++ *      frame protection for all management frames exchanged during the
++ *      negotiation and range measurement procedure.
++ *
+  * @NUM_NL80211_EXT_FEATURES: number of extended features.
+  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+  */
+@@ -5956,6 +6010,10 @@ enum nl80211_ext_feature_index {
+ 	NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+ 	NL80211_EXT_FEATURE_FILS_DISCOVERY,
+ 	NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
++	NL80211_EXT_FEATURE_BEACON_RATE_HE,
++	NL80211_EXT_FEATURE_SECURE_LTF,
++	NL80211_EXT_FEATURE_SECURE_RTT,
++	NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ 
+ 	/* add new features before the definition below */
+ 	NUM_NL80211_EXT_FEATURES,
+@@ -6253,11 +6311,13 @@ struct nl80211_vendor_cmd_info {
+  * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+  * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+  * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
++ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
+  */
+ enum nl80211_tdls_peer_capability {
+ 	NL80211_TDLS_PEER_HT = 1<<0,
+ 	NL80211_TDLS_PEER_VHT = 1<<1,
+ 	NL80211_TDLS_PEER_WMM = 1<<2,
++	NL80211_TDLS_PEER_HE = 1<<3,
+ };
+ 
+ /**
+@@ -6849,6 +6909,9 @@ enum nl80211_peer_measurement_ftm_capa {
+  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+  *	ranging will be used.
++ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
++ *	valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
++ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+  *
+  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
+  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
+@@ -6867,6 +6930,7 @@ enum nl80211_peer_measurement_ftm_req {
+ 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+ 	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
+ 	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
++	NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
+ 
+ 	/* keep last */
+ 	NUM_NL80211_PMSR_FTM_REQ_ATTR,
+@@ -7124,4 +7188,115 @@ enum nl80211_unsol_bcast_probe_resp_attr
+ 	NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+ 		__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+ };
++
++/**
++ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
++ *	derivation. Applicable only when WPA3-Personal SAE authentication is
++ *	used.
++ *
++ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
++ *	attribute is not present from userspace.
++ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
++ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
++ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
++ *	can be used.
++ */
++enum nl80211_sae_pwe_mechanism {
++	NL80211_SAE_PWE_UNSPECIFIED,
++	NL80211_SAE_PWE_HUNT_AND_PECK,
++	NL80211_SAE_PWE_HASH_TO_ELEMENT,
++	NL80211_SAE_PWE_BOTH,
++};
++
++/**
++ * enum nl80211_sar_type - type of SAR specs
++ *
++ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
++ *
++ */
++enum nl80211_sar_type {
++	NL80211_SAR_TYPE_POWER,
++
++	/* add new type here */
++
++	/* Keep last */
++	NUM_NL80211_SAR_TYPE,
++};
++
++/**
++ * enum nl80211_sar_attrs - Attributes for SAR spec
++ *
++ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
++ *
++ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
++ *	limit specifications. Each specification contains a set
++ *	of %nl80211_sar_specs_attrs.
++ *
++ *	For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
++ *	and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
++ *
++ *	For sar_capa dump, it contains array of
++ *	%NL80211_SAR_ATTR_SPECS_START_FREQ
++ *	and %NL80211_SAR_ATTR_SPECS_END_FREQ.
++ *
++ * @__NL80211_SAR_ATTR_LAST: Internal
++ * @NL80211_SAR_ATTR_MAX: highest sar attribute
++ *
++ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
++ */
++enum nl80211_sar_attrs {
++	__NL80211_SAR_ATTR_INVALID,
++
++	NL80211_SAR_ATTR_TYPE,
++	NL80211_SAR_ATTR_SPECS,
++
++	__NL80211_SAR_ATTR_LAST,
++	NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
++};
++
++/**
++ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
++ *
++ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
++ *	power limit value in units of 0.25 dBm if type is
++ *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
++ *	0 means userspace doesn't have SAR limitation on this associated range.
++ *
++ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
++ *	index of exported freq range table and the associated power limitation
++ *	is applied to this range.
++ *
++ *	Userspace isn't required to set all the ranges advertised by WLAN driver,
++ *	and userspace can skip some certain ranges. These skipped ranges don't
++ *	have SAR limitations, and they are same as setting the
++ *	%NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
++ *	value higher than regulatory allowed value just means SAR power
++ *	limitation is removed, but it's required to set at least one range.
++ *	It's not allowed to set duplicated range in one SET operation.
++ *
++ *	Every SET operation overwrites previous SET operation.
++ *
++ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
++ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
++ */
++enum nl80211_sar_specs_attrs {
++	__NL80211_SAR_ATTR_SPECS_INVALID,
++
++	NL80211_SAR_ATTR_SPECS_POWER,
++	NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
++	NL80211_SAR_ATTR_SPECS_START_FREQ,
++	NL80211_SAR_ATTR_SPECS_END_FREQ,
++
++	__NL80211_SAR_ATTR_SPECS_LAST,
++	NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
++};
++
+ #endif /* __LINUX_NL80211_H */

package/kernel/mac80211/patches/subsys/100-remove-cryptoapi-dependencies.patch

@@ -20,7 +20,7 @@
  	ethtool.o \
 --- a/net/mac80211/aead_api.c
 +++ /dev/null
-@@ -1,112 +0,0 @@
+@@ -1,113 +0,0 @@
 -// SPDX-License-Identifier: GPL-2.0-only
 -/*
 - * Copyright 2003-2004, Instant802 Networks, Inc.
@@ -46,6 +46,7 @@
 -	struct aead_request *aead_req;
 -	int reqsize = sizeof(*aead_req) + crypto_aead_reqsize(tfm);
 -	u8 *__aad;
+-	int ret;
 -
 -	aead_req = kzalloc(reqsize + aad_len, GFP_ATOMIC);
 -	if (!aead_req)
@@ -63,10 +64,10 @@
 -	aead_request_set_crypt(aead_req, sg, sg, data_len, b_0);
 -	aead_request_set_ad(aead_req, sg[0].length);
 -
--	crypto_aead_encrypt(aead_req);
+-	ret = crypto_aead_encrypt(aead_req);
 -	kfree_sensitive(aead_req);
 -
--	return 0;
+-	return ret;
 -}
 -
 -int aead_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, size_t aad_len,
@@ -378,7 +379,7 @@
  #endif /* AES_GCM_H */
 --- a/net/mac80211/wpa.c
 +++ b/net/mac80211/wpa.c
-@@ -311,7 +311,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
+@@ -312,7 +312,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
  }
  
  
@@ -388,7 +389,7 @@
  {
  	__le16 mask_fc;
  	int a4_included, mgmt;
-@@ -341,14 +342,8 @@ static void ccmp_special_blocks(struct s
+@@ -342,14 +343,8 @@ static void ccmp_special_blocks(struct s
  	else
  		qos_tid = 0;
  
@@ -405,7 +406,7 @@
  
  	/* Nonce: Nonce Flags | A2 | PN
  	 * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7)
-@@ -356,6 +351,8 @@ static void ccmp_special_blocks(struct s
+@@ -357,6 +352,8 @@ static void ccmp_special_blocks(struct s
  	b_0[1] = qos_tid | (mgmt << 4);
  	memcpy(&b_0[2], hdr->addr2, ETH_ALEN);
  	memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN);
@@ -414,7 +415,7 @@
  
  	/* AAD (extra authenticate-only data) / masked 802.11 header
  	 * FC | A1 | A2 | A3 | SC | [A4] | [QC] */
-@@ -412,7 +409,7 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -413,7 +410,7 @@ static int ccmp_encrypt_skb(struct ieee8
  	u8 *pos;
  	u8 pn[6];
  	u64 pn64;
@@ -423,7 +424,7 @@
  	u8 b_0[AES_BLOCK_SIZE];
  
  	if (info->control.hw_key &&
-@@ -467,9 +464,11 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -468,9 +465,11 @@ static int ccmp_encrypt_skb(struct ieee8
  		return 0;
  
  	pos += IEEE80211_CCMP_HDR_LEN;
@@ -438,7 +439,7 @@
  }
  
  
-@@ -542,13 +541,13 @@ ieee80211_crypto_ccmp_decrypt(struct iee
+@@ -546,13 +545,13 @@ ieee80211_crypto_ccmp_decrypt(struct iee
  			u8 aad[2 * AES_BLOCK_SIZE];
  			u8 b_0[AES_BLOCK_SIZE];
  			/* hardware didn't decrypt/verify MIC */
@@ -454,7 +455,7 @@
  				return RX_DROP_UNUSABLE;
  		}
  
-@@ -643,7 +642,7 @@ static int gcmp_encrypt_skb(struct ieee8
+@@ -649,7 +648,7 @@ static int gcmp_encrypt_skb(struct ieee8
  	u8 *pos;
  	u8 pn[6];
  	u64 pn64;
@@ -463,7 +464,7 @@
  	u8 j_0[AES_BLOCK_SIZE];
  
  	if (info->control.hw_key &&
-@@ -700,8 +699,10 @@ static int gcmp_encrypt_skb(struct ieee8
+@@ -706,8 +705,10 @@ static int gcmp_encrypt_skb(struct ieee8
  
  	pos += IEEE80211_GCMP_HDR_LEN;
  	gcmp_special_blocks(skb, pn, j_0, aad);
@@ -476,7 +477,7 @@
  }
  
  ieee80211_tx_result
-@@ -1128,9 +1129,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct
+@@ -1139,9 +1140,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct
  	struct ieee80211_key *key = tx->key;
  	struct ieee80211_mmie_16 *mmie;
  	struct ieee80211_hdr *hdr;
@@ -488,7 +489,7 @@
  
  	if (WARN_ON(skb_queue_len(&tx->skbs) != 1))
  		return TX_DROP;
-@@ -1176,7 +1177,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
+@@ -1187,7 +1188,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct
  	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
  	struct ieee80211_key *key = rx->key;
  	struct ieee80211_mmie_16 *mmie;

package/kernel/mac80211/patches/subsys/110-mac80211_keep_keys_on_stop_ap.patch

@@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects
 
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -1288,7 +1288,6 @@ static int ieee80211_stop_ap(struct wiph
+@@ -1307,7 +1307,6 @@ static int ieee80211_stop_ap(struct wiph
  	sdata->vif.bss_conf.ftmr_params = NULL;
  
  	__sta_info_flush(sdata, true);

package/kernel/mac80211/patches/subsys/150-disable_addr_notifier.patch

@@ -18,7 +18,7 @@
  static int ieee80211_ifa6_changed(struct notifier_block *nb,
  				  unsigned long data, void *arg)
  {
-@@ -1301,14 +1301,14 @@ int ieee80211_register_hw(struct ieee802
+@@ -1315,14 +1315,14 @@ int ieee80211_register_hw(struct ieee802
  
  	rtnl_unlock();
  
@@ -35,7 +35,7 @@
  	local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
  	result = register_inet6addr_notifier(&local->ifa6_notifier);
  	if (result)
-@@ -1317,13 +1317,13 @@ int ieee80211_register_hw(struct ieee802
+@@ -1331,13 +1331,13 @@ int ieee80211_register_hw(struct ieee802
  
  	return 0;
  
@@ -52,7 +52,7 @@
   fail_ifa:
  #endif
  	wiphy_unregister(local->hw.wiphy);
-@@ -1351,10 +1351,10 @@ void ieee80211_unregister_hw(struct ieee
+@@ -1365,10 +1365,10 @@ void ieee80211_unregister_hw(struct ieee
  	tasklet_kill(&local->tx_pending_tasklet);
  	tasklet_kill(&local->tasklet);
  

package/kernel/mac80211/patches/subsys/210-ap_scan.patch

@@ -1,6 +1,6 @@
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -2442,7 +2442,7 @@ static int ieee80211_scan(struct wiphy *
+@@ -2463,7 +2463,7 @@ static int ieee80211_scan(struct wiphy *
  		 * the  frames sent while scanning on other channel will be
  		 * lost)
  		 */

package/kernel/mac80211/patches/subsys/300-cfg80211-support-immediate-reconnect-request-hint.patch

@@ -14,7 +14,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 
 --- a/include/net/cfg80211.h
 +++ b/include/net/cfg80211.h
-@@ -6410,13 +6410,15 @@ void cfg80211_abandon_assoc(struct net_d
+@@ -6408,13 +6408,15 @@ void cfg80211_abandon_assoc(struct net_d
   * @dev: network device
   * @buf: 802.11 frame (header + body)
   * @len: length of the frame data
@@ -31,31 +31,9 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  /**
   * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame
---- a/include/uapi/linux/nl80211.h
-+++ b/include/uapi/linux/nl80211.h
-@@ -2527,6 +2527,10 @@ enum nl80211_commands {
-  *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
-  *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
-  *
-+ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
-+ *	disassoc events to indicate that an immediate reconnect to the AP
-+ *	is desired.
-+ *
-  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
-  * @NL80211_ATTR_MAX: highest attribute number currently defined
-  * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -3016,6 +3020,8 @@ enum nl80211_attrs {
- 	NL80211_ATTR_S1G_CAPABILITY,
- 	NL80211_ATTR_S1G_CAPABILITY_MASK,
- 
-+	NL80211_ATTR_RECONNECT_REQUESTED,
-+
- 	/* add attributes here, update the policy in nl80211.c */
- 
- 	__NL80211_ATTR_AFTER_LAST,
 --- a/net/mac80211/mlme.c
 +++ b/net/mac80211/mlme.c
-@@ -2729,7 +2729,7 @@ static void ieee80211_report_disconnect(
+@@ -2725,7 +2725,7 @@ static void ieee80211_report_disconnect(
  	};
  
  	if (tx)
@@ -64,7 +42,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	else
  		cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
  
-@@ -4716,7 +4716,8 @@ void ieee80211_mgd_quiesce(struct ieee80
+@@ -4719,7 +4719,8 @@ void ieee80211_mgd_quiesce(struct ieee80
  		if (ifmgd->auth_data)
  			ieee80211_destroy_auth_data(sdata, false);
  		cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
@@ -166,7 +144,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
 --- a/net/wireless/nl80211.c
 +++ b/net/wireless/nl80211.c
-@@ -732,6 +732,7 @@ static const struct nla_policy nl80211_p
+@@ -736,6 +736,7 @@ static const struct nla_policy nl80211_p
  		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
  	[NL80211_ATTR_S1G_CAPABILITY_MASK] =
  		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
@@ -174,7 +152,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  };
  
  /* policy for the key attributes */
-@@ -15899,7 +15900,7 @@ static void nl80211_send_mlme_event(stru
+@@ -15902,7 +15903,7 @@ static void nl80211_send_mlme_event(stru
  				    const u8 *buf, size_t len,
  				    enum nl80211_commands cmd, gfp_t gfp,
  				    int uapsd_queues, const u8 *req_ies,
@@ -183,7 +161,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  {
  	struct sk_buff *msg;
  	void *hdr;
-@@ -15921,6 +15922,9 @@ static void nl80211_send_mlme_event(stru
+@@ -15924,6 +15925,9 @@ static void nl80211_send_mlme_event(stru
  	     nla_put(msg, NL80211_ATTR_REQ_IE, req_ies_len, req_ies)))
  		goto nla_put_failure;
  
@@ -193,7 +171,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	if (uapsd_queues >= 0) {
  		struct nlattr *nla_wmm =
  			nla_nest_start_noflag(msg, NL80211_ATTR_STA_WME);
-@@ -15949,7 +15953,8 @@ void nl80211_send_rx_auth(struct cfg8021
+@@ -15952,7 +15956,8 @@ void nl80211_send_rx_auth(struct cfg8021
  			  size_t len, gfp_t gfp)
  {
  	nl80211_send_mlme_event(rdev, netdev, buf, len,
@@ -203,7 +181,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
-@@ -15959,23 +15964,25 @@ void nl80211_send_rx_assoc(struct cfg802
+@@ -15962,23 +15967,25 @@ void nl80211_send_rx_assoc(struct cfg802
  {
  	nl80211_send_mlme_event(rdev, netdev, buf, len,
  				NL80211_CMD_ASSOCIATE, gfp, uapsd_queues,
@@ -234,7 +212,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev, const u8 *buf,
-@@ -16006,7 +16013,7 @@ void cfg80211_rx_unprot_mlme_mgmt(struct
+@@ -16009,7 +16016,7 @@ void cfg80211_rx_unprot_mlme_mgmt(struct
  
  	trace_cfg80211_rx_unprot_mlme_mgmt(dev, buf, len);
  	nl80211_send_mlme_event(rdev, dev, buf, len, cmd, GFP_ATOMIC, -1,

package/kernel/mac80211/patches/subsys/301-mac80211-support-driver-based-disconnect-with-reconn.patch

@@ -34,7 +34,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
   * @vif: &struct ieee80211_vif pointer from the add_interface callback.
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -461,7 +461,9 @@ struct ieee80211_if_managed {
+@@ -450,7 +450,9 @@ struct ieee80211_if_managed {
  	unsigned long probe_timeout;
  	int probe_send_count;
  	bool nullfunc_failed;
@@ -47,7 +47,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	struct ieee80211_mgd_auth_data *auth_data;
 --- a/net/mac80211/mlme.c
 +++ b/net/mac80211/mlme.c
-@@ -2720,7 +2720,7 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get)
+@@ -2716,7 +2716,7 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get)
  
  static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
  					const u8 *buf, size_t len, bool tx,
@@ -56,7 +56,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  {
  	struct ieee80211_event event = {
  		.type = MLME_EVENT,
-@@ -2729,7 +2729,7 @@ static void ieee80211_report_disconnect(
+@@ -2725,7 +2725,7 @@ static void ieee80211_report_disconnect(
  	};
  
  	if (tx)
@@ -65,7 +65,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	else
  		cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
  
-@@ -2751,13 +2751,18 @@ static void __ieee80211_disconnect(struc
+@@ -2747,13 +2747,18 @@ static void __ieee80211_disconnect(struc
  
  	tx = !sdata->csa_block_tx;
  
@@ -89,7 +89,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  			       tx, frame_buf);
  	mutex_lock(&local->mtx);
  	sdata->vif.csa_active = false;
-@@ -2770,7 +2775,9 @@ static void __ieee80211_disconnect(struc
+@@ -2766,7 +2771,9 @@ static void __ieee80211_disconnect(struc
  	mutex_unlock(&local->mtx);
  
  	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
@@ -100,7 +100,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  	sdata_unlock(sdata);
  }
-@@ -2789,6 +2796,13 @@ static void ieee80211_beacon_connection_
+@@ -2785,6 +2792,13 @@ static void ieee80211_beacon_connection_
  		sdata_info(sdata, "Connection to AP %pM lost\n",
  			   ifmgd->bssid);
  		__ieee80211_disconnect(sdata);
@@ -114,7 +114,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	} else {
  		ieee80211_mgd_probe_ap(sdata, true);
  	}
-@@ -2827,6 +2841,21 @@ void ieee80211_connection_loss(struct ie
+@@ -2823,6 +2837,21 @@ void ieee80211_connection_loss(struct ie
  }
  EXPORT_SYMBOL(ieee80211_connection_loss);
  
@@ -136,7 +136,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
  					bool assoc)
-@@ -3130,7 +3159,7 @@ static void ieee80211_rx_mgmt_deauth(str
+@@ -3126,7 +3155,7 @@ static void ieee80211_rx_mgmt_deauth(str
  		ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
  
  		ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
@@ -145,7 +145,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return;
  	}
  
-@@ -3179,7 +3208,8 @@ static void ieee80211_rx_mgmt_disassoc(s
+@@ -3175,7 +3204,8 @@ static void ieee80211_rx_mgmt_disassoc(s
  
  	ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
  
@@ -174,7 +174,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
-@@ -5431,7 +5462,8 @@ int ieee80211_mgd_auth(struct ieee80211_
+@@ -5434,7 +5465,8 @@ int ieee80211_mgd_auth(struct ieee80211_
  
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -184,7 +184,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	}
  
  	sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
-@@ -5503,7 +5535,8 @@ int ieee80211_mgd_assoc(struct ieee80211
+@@ -5506,7 +5538,8 @@ int ieee80211_mgd_assoc(struct ieee80211
  
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -194,7 +194,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	}
  
  	if (ifmgd->auth_data && !ifmgd->auth_data->done) {
-@@ -5802,7 +5835,7 @@ int ieee80211_mgd_deauth(struct ieee8021
+@@ -5809,7 +5842,7 @@ int ieee80211_mgd_deauth(struct ieee8021
  		ieee80211_destroy_auth_data(sdata, false);
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -203,7 +203,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  		return 0;
  	}
-@@ -5822,7 +5855,7 @@ int ieee80211_mgd_deauth(struct ieee8021
+@@ -5829,7 +5862,7 @@ int ieee80211_mgd_deauth(struct ieee8021
  		ieee80211_destroy_assoc_data(sdata, false, true);
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -212,7 +212,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return 0;
  	}
  
-@@ -5837,7 +5870,7 @@ int ieee80211_mgd_deauth(struct ieee8021
+@@ -5844,7 +5877,7 @@ int ieee80211_mgd_deauth(struct ieee8021
  				       req->reason_code, tx, frame_buf);
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -221,7 +221,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return 0;
  	}
  
-@@ -5870,7 +5903,7 @@ int ieee80211_mgd_disassoc(struct ieee80
+@@ -5877,7 +5910,7 @@ int ieee80211_mgd_disassoc(struct ieee80
  			       frame_buf);
  
  	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,

package/kernel/mac80211/patches/subsys/302-cfg80211-Add-support-to-configure-SAE-PWE-value-to-d.patch

@@ -0,0 +1,74 @@
+From: Rohan Dutta <drohan@codeaurora.org>
+Date: Tue, 27 Oct 2020 12:09:10 +0200
+Subject: [PATCH] cfg80211: Add support to configure SAE PWE value to drivers
+
+Add support to configure SAE PWE preference from userspace to drivers in
+both AP and STA modes. This is needed for cases where the driver takes
+care of Authentication frame processing (SME in the driver) so that
+correct enforcement of the acceptable PWE derivation mechanism can be
+performed.
+
+The userspace applications can pass the sae_pwe value using the
+NL80211_ATTR_SAE_PWE attribute in the NL80211_CMD_CONNECT and
+NL80211_CMD_START_AP commands to the driver. This allows selection
+between the hunting-and-pecking loop and hash-to-element options for PWE
+derivation. For backwards compatibility, this new attribute is optional
+and if not included, the driver is notified of the value being
+unspecified.
+
+Signed-off-by: Rohan Dutta <drohan@codeaurora.org>
+Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
+Link: https://lore.kernel.org/r/20201027100910.22283-1-jouni@codeaurora.org
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/include/net/cfg80211.h
++++ b/include/net/cfg80211.h
+@@ -1009,6 +1009,14 @@ struct survey_info {
+  * @sae_pwd: password for SAE authentication (for devices supporting SAE
+  *	offload)
+  * @sae_pwd_len: length of SAE password (for devices supporting SAE offload)
++ * @sae_pwe: The mechanisms allowed for SAE PWE derivation
++ *	NL80211_SAE_PWE_UNSPECIFIED: Not-specified, used to indicate userspace
++ *		did not specify any preference. The driver should follow its
++ *		internal policy in such a scenario.
++ *	NL80211_SAE_PWE_HUNT_AND_PECK: Allow hunting-and-pecking loop only
++ *	NL80211_SAE_PWE_HASH_TO_ELEMENT: Allow hash-to-element only
++ *	NL80211_SAE_PWE_BOTH: Allow either hunting-and-pecking loop
++ *		or hash-to-element
+  */
+ struct cfg80211_crypto_settings {
+ 	u32 wpa_versions;
+@@ -1027,6 +1035,7 @@ struct cfg80211_crypto_settings {
+ 	const u8 *psk;
+ 	const u8 *sae_pwd;
+ 	u8 sae_pwd_len;
++	enum nl80211_sae_pwe_mechanism sae_pwe;
+ };
+ 
+ /**
+--- a/net/wireless/nl80211.c
++++ b/net/wireless/nl80211.c
+@@ -736,6 +736,9 @@ static const struct nla_policy nl80211_p
+ 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
+ 	[NL80211_ATTR_S1G_CAPABILITY_MASK] =
+ 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
++	[NL80211_ATTR_SAE_PWE] =
++		NLA_POLICY_RANGE(NLA_U8, NL80211_SAE_PWE_HUNT_AND_PECK,
++				 NL80211_SAE_PWE_BOTH),
+ 	[NL80211_ATTR_RECONNECT_REQUESTED] = { .type = NLA_REJECT },
+ };
+ 
+@@ -9763,6 +9766,12 @@ static int nl80211_crypto_settings(struc
+ 			nla_len(info->attrs[NL80211_ATTR_SAE_PASSWORD]);
+ 	}
+ 
++	if (info->attrs[NL80211_ATTR_SAE_PWE])
++		settings->sae_pwe =
++			nla_get_u8(info->attrs[NL80211_ATTR_SAE_PWE]);
++	else
++		settings->sae_pwe = NL80211_SAE_PWE_UNSPECIFIED;
++
+ 	return 0;
+ }
+