OpenWrt v21.02.0: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://git.openwrt.org/feed/packages.git^e738d2faf1c4ed68094f1d5da075d2d92fb35049
-src-git luci https://git.openwrt.org/project/luci.git^2778366916f815d4af9534218bef10aa3aad3c01
-src-git routing https://git.openwrt.org/feed/routing.git^2baff33918c089fd3744c7192f8ae7a29c47a8d7
-src-git telephony https://git.openwrt.org/feed/telephony.git^ee64ec42e981e1f9e5a21cd3478497987ff76680
+src-git packages https://git.openwrt.org/feed/packages.git^65057dcbb5de371503c9159de3d45824bec482e0
+src-git luci https://git.openwrt.org/project/luci.git^3b3c2e5f9f82372df8ff01ac65668be47690dcd5
+src-git routing https://git.openwrt.org/feed/routing.git^c30c9ffc93702365439a7647244a052531f2e957
+src-git telephony https://git.openwrt.org/feed/telephony.git^7f73a9ad19269dcddcb7fc26e03a9823717587bb

include/feeds.mk

@@ -43,5 +43,11 @@ endef
 
 # 1: package name
 define GetABISuffix
-$(if $(filter-out kmod-%,$(1)),$(if $(ABIV_$(1)),$(ABIV_$(1)),$(foreach v,$(wildcard $(STAGING_DIR)/pkginfo/$(1).version),$(shell cat $(v)))))
+$(if $(ABIV_$(1)),$(ABIV_$(1)),$(call FormatABISuffix,$(1),$(foreach v,$(wildcard $(STAGING_DIR)/pkginfo/$(1).version),$(shell cat $(v)))))
+endef
+
+# 1: package name
+# 2: abi version
+define FormatABISuffix
+$(if $(filter-out kmod-%,$(1)),$(if $(2),$(if $(filter %0 %1 %2 %3 %4 %5 %6 %7 %8 %9,$(1)),-)$(2)))
 endef

include/kernel-version.mk

@@ -6,9 +6,9 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-5.4 = .124
+LINUX_VERSION-5.4 = .143
 
-LINUX_KERNEL_HASH-5.4.124 = f7f29dda2b042d7b5986d18274413131cf70e17288c05e9a683df1f46c507d82
+LINUX_KERNEL_HASH-5.4.143 = 0953650b05a5f806d76c5691583e94e141f4f691bc0ba75a60b643740f021d24
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

include/package-ipkg.mk

@@ -99,7 +99,7 @@ _endef=endef
 
 ifeq ($(DUMP),)
   define BuildTarget/ipkg
-    ABIV_$(1):=$(if $(filter-out kmod-%,$(1)),$(ABI_VERSION))
+    ABIV_$(1):=$(call FormatABISuffix,$(1),$(ABI_VERSION))
     PDIR_$(1):=$(call FeedPackageDir,$(1))
     IPKG_$(1):=$$(PDIR_$(1))/$(1)$$(ABIV_$(1))_$(VERSION)_$(PKGARCH).ipk
     IDIR_$(1):=$(PKG_BUILD_DIR)/ipkg-$(PKGARCH)/$(1)

include/prereq-build.mk

@@ -168,6 +168,10 @@ $(eval $(call SetupHostCommand,python3,Please install Python >= 3.5, \
 	python3.5 -V 2>&1 | grep 'Python 3', \
 	python3 -V 2>&1 | grep -E 'Python 3\.[5-9]\.?'))
 
+$(eval $(call TestHostCommand,python3-distutils, \
+	Please install the Python3 distutils module, \
+	$(STAGING_DIR_HOST)/bin/python3 -c 'import distutils'))
+
 $(eval $(call SetupHostCommand,git,Please install Git (git-core) >= 1.7.12.2, \
 	git --exec-path | xargs -I % -- grep -q -- --recursive %/git-submodule))
 

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.0-rc3)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.0)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16172-2aba3e9784)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16279-5cc0535800)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.0-rc3)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.0)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/base-files/files/bin/config_generate

@@ -114,9 +114,17 @@ generate_network() {
 			add network device
 			set network.@device[-1].name='br-$1'
 			set network.@device[-1].type='bridge'
-			set network.@device[-1].macaddr='$macaddr'
 		EOF
 		for port in $ports; do uci add_list network.@device[-1].ports="$port"; done
+		[ -n "$macaddr" ] && {
+			for port in $ports; do
+				uci -q batch <<-EOF
+					add network device
+					set network.@device[-1].name='$port'
+					set network.@device[-1].macaddr='$macaddr'
+				EOF
+			done
+		}
 		device=br-$1
 		type=
 		macaddr=""

package/base-files/files/etc/init.d/system

@@ -4,8 +4,7 @@
 START=10
 USE_PROCD=1
 
-validate_system_section()
-{
+validate_system_section() {
 	uci_load_validate system system "$1" "$2" \
 		'hostname:string:OpenWrt' \
 		'conloglevel:uinteger' \
@@ -23,8 +22,9 @@ system_config() {
 	echo "$hostname" > /proc/sys/kernel/hostname
 	[ -z "$conloglevel" -a -z "$buffersize" ] || dmesg ${conloglevel:+-n $conloglevel} ${buffersize:+-s $buffersize}
 	echo "$timezone" > /tmp/TZ
-	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/$zonename" ] && \
-		ln -sf "/usr/share/zoneinfo/$zonename" /tmp/localtime && rm -f /tmp/TZ
+	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/${zonename// /_}" ] \
+		&& ln -sf "/usr/share/zoneinfo/${zonename// /_}" /tmp/localtime \
+		&& rm -f /tmp/TZ
 
 	# apply timezone to kernel
 	hwclock -u --systz
@@ -35,8 +35,7 @@ reload_service() {
 	config_foreach validate_system_section system system_config
 }
 
-service_triggers()
-{
+service_triggers() {
 	procd_add_reload_trigger "system"
 	procd_add_validation validate_system_section
 }

package/base-files/files/lib/preinit/10_indicate_preinit

@@ -72,14 +72,20 @@ preinit_config_board() {
 
 	json_select network
 		json_select "lan"
-			json_get_vars ifname
+			json_get_vars device
+			json_get_values ports ports
 		json_select ..
 	json_select ..
 
-	[ -n "$ifname" ] || return
+	[ -n "$device" -o -n "$ports" ] || return
+
+	# swconfig uses $device and DSA uses ports
+	[ -z "$ports" ] && {
+		ports="$device"
+	}
 
 	# only use the first one
-	ifname=${ifname%% *}
+	ifname=${ports%% *}
 
 	if [ -x /sbin/swconfig ]; then
 		# configure the switch, if present
@@ -91,6 +97,8 @@ preinit_config_board() {
 	else
 		# trim any vlan ids
 		ifname=${ifname%\.*}
+		# trim any vlan modifiers like :t
+		ifname=${ifname%\:*}
 	fi
 
 	pi_ifname=$ifname

package/base-files/files/sbin/wifi

@@ -130,10 +130,12 @@ wifi_updown() {
 		ubus_wifi_cmd "$cmd" "$2"
 		scan_wifi
 		cmd=up
+		ubus call network reload
 	}
 	[ reconf = "$1" ] && {
 		scan_wifi
 		cmd=reconf
+		ubus call network reload
 	}
 	ubus_wifi_cmd "$cmd" "$2"
 	_wifi_updown "$@"
@@ -246,7 +248,7 @@ case "$1" in
 	reload) wifi_reload "$2";;
 	reload_legacy) wifi_reload_legacy "$2";;
 	--help|help) usage;;
-	reconf) ubus call network reload; wifi_updown "reconf" "$2";;
-	''|up) ubus call network reload; wifi_updown "enable" "$2";;
+	reconf) wifi_updown "reconf" "$2";;
+	''|up) wifi_updown "enable" "$2";;
 	*) usage; exit 1;;
 esac

package/base-files/image-config.in

@@ -183,7 +183,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/releases/21.02.0-rc3"
+		default "https://downloads.openwrt.org/releases/21.02.0"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/uboot-at91/patches/001-fix-Wformat-security.patch

@@ -1,8 +1,6 @@
-diff --git a/cmd/version.c b/cmd/version.c
-index b2fffe99..bcbbeb18 100644
 --- a/cmd/version.c
 +++ b/cmd/version.c
-@@ -18,7 +18,7 @@ static int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+@@ -18,7 +18,7 @@ static int do_version(cmd_tbl_t *cmdtp,
  {
  	char buf[DISPLAY_OPTIONS_BANNER_LENGTH];
  
@@ -11,11 +9,9 @@ index b2fffe99..bcbbeb18 100644
  #ifdef CC_VERSION_STRING
  	puts(CC_VERSION_STRING "\n");
  #endif
-diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c
-index 3425ed11..8c2e1d5c 100644
 --- a/drivers/pinctrl/pinctrl-uclass.c
 +++ b/drivers/pinctrl/pinctrl-uclass.c
-@@ -368,7 +368,7 @@ int pinctrl_get_pin_name(struct udevice *dev, int selector, char *buf,
+@@ -368,7 +368,7 @@ int pinctrl_get_pin_name(struct udevice
  	if (!ops->get_pin_name)
  		return -ENOSYS;
  
@@ -24,11 +20,9 @@ index 3425ed11..8c2e1d5c 100644
  
  	return 0;
  }
-diff --git a/lib/efi_loader/efi_variable.c b/lib/efi_loader/efi_variable.c
-index c316bdfe..5fe8129c 100644
 --- a/lib/efi_loader/efi_variable.c
 +++ b/lib/efi_loader/efi_variable.c
-@@ -522,7 +522,7 @@ efi_status_t EFIAPI efi_set_variable(u16 *variable_name,
+@@ -522,7 +522,7 @@ efi_status_t EFIAPI efi_set_variable(u16
  
  	if (old_size)
  		/* APPEND_WRITE */

package/boot/uboot-at91/patches/010-fix_dtc_compilation_on_host_gcc10.patch

@@ -0,0 +1,46 @@
+From e33a814e772cdc36436c8c188d8c42d019fda639 Mon Sep 17 00:00:00 2001
+From: Dirk Mueller <dmueller@suse.com>
+Date: Tue, 14 Jan 2020 18:53:41 +0100
+Subject: [PATCH] scripts/dtc: Remove redundant YYLOC global declaration
+
+gcc 10 will default to -fno-common, which causes this error at link
+time:
+
+  (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
+
+This is because both dtc-lexer as well as dtc-parser define the same
+global symbol yyloc. Before with -fcommon those were merged into one
+defintion. The proper solution would be to to mark this as "extern",
+however that leads to:
+
+  dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
+   26 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+In file included from dtc-lexer.l:24:
+dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
+  127 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+cc1: all warnings being treated as errors
+
+which means the declaration is completely redundant and can just be
+dropped.
+
+Signed-off-by: Dirk Mueller <dmueller@suse.com>
+Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+[robh: cherry-pick from upstream]
+Cc: stable@vger.kernel.org
+Signed-off-by: Rob Herring <robh@kernel.org>
+---
+ scripts/dtc/dtc-lexer.l | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/scripts/dtc/dtc-lexer.l
++++ b/scripts/dtc/dtc-lexer.l
+@@ -38,7 +38,6 @@ LINECOMMENT	"//".*\n
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */

package/boot/uboot-layerscape/patches/010-fix_dtc_compilation_on_host_gcc10.patch

@@ -0,0 +1,46 @@
+From e33a814e772cdc36436c8c188d8c42d019fda639 Mon Sep 17 00:00:00 2001
+From: Dirk Mueller <dmueller@suse.com>
+Date: Tue, 14 Jan 2020 18:53:41 +0100
+Subject: [PATCH] scripts/dtc: Remove redundant YYLOC global declaration
+
+gcc 10 will default to -fno-common, which causes this error at link
+time:
+
+  (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
+
+This is because both dtc-lexer as well as dtc-parser define the same
+global symbol yyloc. Before with -fcommon those were merged into one
+defintion. The proper solution would be to to mark this as "extern",
+however that leads to:
+
+  dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
+   26 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+In file included from dtc-lexer.l:24:
+dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
+  127 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+cc1: all warnings being treated as errors
+
+which means the declaration is completely redundant and can just be
+dropped.
+
+Signed-off-by: Dirk Mueller <dmueller@suse.com>
+Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+[robh: cherry-pick from upstream]
+Cc: stable@vger.kernel.org
+Signed-off-by: Rob Herring <robh@kernel.org>
+---
+ scripts/dtc/dtc-lexer.l | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/scripts/dtc/dtc-lexer.l
++++ b/scripts/dtc/dtc-lexer.l
+@@ -38,7 +38,6 @@ LINECOMMENT	"//".*\n
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */

package/kernel/ath10k-ct/Makefile

@@ -1,16 +1,16 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ath10k-ct
-PKG_RELEASE=2
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-01-11
-PKG_SOURCE_VERSION:=9fe1df7d4f783b6b0cd1c99d11979e5a6e6fc40b
-PKG_MIRROR_HASH:=4e30e256716611045e930b95eadaa8bfcadd5bdd8bbe3869cfe0f377920e812b
+PKG_SOURCE_DATE:=2021-06-03
+PKG_SOURCE_VERSION:=b44cd7b2e7b0df5995ece18f358d4dfc40834ba1
+PKG_MIRROR_HASH:=59f961ad425eb1a48fa9c391a325cc0f23845daec9d12673445d3077f9756cf0
 
 # Build the 5.10 ath10k-ct driver version.
 # Probably this should match as closely as

package/kernel/ath10k-ct/patches/164-ath10k-commit-rates-from-mac80211.patch

@@ -1,37 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Tue, 26 Feb 2019 08:06:35 +0100
-Subject: ath10k-ct: apply mac80211 rates to ath10k-ct rate state
-
-The rates from mac80211 have to be copied to the state of ath10k-ct or
-otherwise the ath10k_check_apply_special_rates function overwrites
-them again with some default values. This breaks for example the
-mcast_rate set for a wifi-iface.
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
---- a/ath10k-5.10/mac.c
-+++ b/ath10k-5.10/mac.c
-@@ -6774,6 +6774,7 @@ static void ath10k_recalculate_mgmt_rate
- 		return;
- 	}
- 
-+	arvif->mgt_rate[def->chan->band] = hw_rate_code;
- 	vdev_param = ar->wmi.vdev_param->mgmt_rate;
- 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
- 					hw_rate_code);
-@@ -7000,6 +7001,7 @@ static void ath10k_bss_info_changed(stru
- 			   "mac vdev %d mcast_rate %x\n",
- 			   arvif->vdev_id, rate);
- 
-+		arvif->mcast_rate[band] = rate;
- 		vdev_param = ar->wmi.vdev_param->mcast_data_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- 						vdev_param, rate);
-@@ -7008,6 +7010,7 @@ static void ath10k_bss_info_changed(stru
- 				    "failed to set mcast rate on vdev %i: %d\n",
- 				    arvif->vdev_id,  ret);
- 
-+		arvif->bcast_rate[band] = rate;
- 		vdev_param = ar->wmi.vdev_param->bcast_data_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- 						vdev_param, rate);

package/kernel/ath10k-ct/patches/201-ath10k-add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -210,7 +210,7 @@ v13:
  
  #include "htt.h"
  #include "htc.h"
-@@ -1551,6 +1552,13 @@ struct ath10k {
+@@ -1557,6 +1558,13 @@ struct ath10k {
  	} testmode;
  
  	struct {
@@ -445,7 +445,7 @@ v13:
  {
 --- a/ath10k-5.10/wmi-tlv.c
 +++ b/ath10k-5.10/wmi-tlv.c
-@@ -4585,6 +4585,8 @@ static const struct wmi_ops wmi_tlv_ops
+@@ -4594,6 +4594,8 @@ static const struct wmi_ops wmi_tlv_ops
  	.gen_echo = ath10k_wmi_tlv_op_gen_echo,
  	.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
  	.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,

package/kernel/ath10k-ct/patches/202-ath10k-use-tpt-trigger-by-default.patch

@@ -16,7 +16,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
 
 --- a/ath10k-5.10/core.h
 +++ b/ath10k-5.10/core.h
-@@ -1659,6 +1659,10 @@ struct ath10k {
+@@ -1665,6 +1665,10 @@ struct ath10k {
  	u8 csi_data[4096];
  	u16 csi_data_len;
  
@@ -42,7 +42,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	if (ret)
 --- a/ath10k-5.10/mac.c
 +++ b/ath10k-5.10/mac.c
-@@ -11400,7 +11400,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -11403,7 +11403,7 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  
  #ifdef CPTCFG_MAC80211_LEDS

package/kernel/exfat/Makefile

@@ -7,12 +7,12 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=exfat
-PKG_VERSION:=5.10.1
-PKG_RELEASE:=1
+PKG_VERSION:=5.12.3
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/namjaejeon/linux-exfat-oot/tar.gz/$(PKG_VERSION)?
-PKG_HASH:=0ff77dd7d39eb231d00c3c4909b9fad31ebeeb618bd6fa18fce142becc9c1f98
+PKG_HASH:=43889c73af76c466bbc904aff80354a62ecaa24c7b20e354ff735f5949907982
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/linux-exfat-oot-$(PKG_VERSION)
 
 PKG_MAINTAINER:=

package/kernel/linux/modules/netsupport.mk

@@ -721,7 +721,7 @@ $(eval $(call KernelPackage,mppe))
 
 
 SCHED_MODULES = $(patsubst $(LINUX_DIR)/net/sched/%.ko,%,$(wildcard $(LINUX_DIR)/net/sched/*.ko))
-SCHED_MODULES_CORE = sch_ingress sch_fq_codel sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_tcindex cls_u32 em_u32 act_mirred act_skbedit cls_matchall
+SCHED_MODULES_CORE = sch_ingress sch_fq_codel sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_tcindex cls_u32 em_u32 act_gact act_mirred act_skbedit cls_matchall
 SCHED_MODULES_FILTER = $(SCHED_MODULES_CORE) act_connmark act_ctinfo sch_cake sch_netem sch_mqprio em_ipset cls_bpf cls_flower act_bpf act_vlan
 SCHED_MODULES_EXTRA = $(filter-out $(SCHED_MODULES_FILTER),$(SCHED_MODULES))
 SCHED_FILES = $(patsubst %,$(LINUX_DIR)/net/sched/%.ko,$(filter $(SCHED_MODULES_CORE),$(SCHED_MODULES)))
@@ -745,6 +745,7 @@ define KernelPackage/sched-core
 	CONFIG_NET_CLS_ROUTE4 \
 	CONFIG_NET_CLS_TCINDEX \
 	CONFIG_NET_CLS_U32 \
+	CONFIG_NET_ACT_GACT \
 	CONFIG_NET_ACT_MIRRED \
 	CONFIG_NET_ACT_SKBEDIT \
 	CONFIG_NET_CLS_MATCHALL \
@@ -899,7 +900,6 @@ define KernelPackage/sched
 	CONFIG_NET_SCH_FQ \
 	CONFIG_NET_SCH_PIE \
 	CONFIG_NET_ACT_POLICE \
-	CONFIG_NET_ACT_GACT \
 	CONFIG_NET_ACT_IPT \
 	CONFIG_NET_ACT_PEDIT \
 	CONFIG_NET_ACT_SIMP \

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -907,10 +907,8 @@ drv_mac80211_setup() {
 		return 1
 	}
 
-	[ -z "$(uci -q -P /var/state show wireless._${phy})" ] && {
-		uci -q -P /var/state set wireless._${phy}=phy
-		wireless_set_data phy="$phy"
-	}
+	wireless_set_data phy="$phy"
+	[ -z "$(uci -q -P /var/state show wireless._${phy})" ] && uci -q -P /var/state set wireless._${phy}=phy
 
 	OLDAPLIST=$(uci -q -P /var/state get wireless._${phy}.aplist)
 	OLDSPLIST=$(uci -q -P /var/state get wireless._${phy}.splist)
@@ -1003,6 +1001,7 @@ drv_mac80211_setup() {
 	[ -n "$hostapd_ctrl" ] && {
 		local no_reload=1
 		if [ -n "$(ubus list | grep hostapd.$primary_ap)" ]; then
+			no_reload=0
 			[ "${NEW_MD5}" = "${OLD_MD5}" ] || {
 				ubus call hostapd.$primary_ap reload
 				no_reload=$?
@@ -1077,6 +1076,10 @@ drv_mac80211_teardown() {
 	json_select data
 	json_get_vars phy
 	json_select ..
+	[ -n "$phy" ] || {
+		echo "Bug: PHY is undefined for device '$1'"
+		return 1
+	}
 
 	mac80211_interface_cleanup "$phy"
 	uci -q -P /var/state revert wireless._${phy}

package/kernel/mac80211/patches/subsys/010-sync-nl80211_h.patch

@@ -0,0 +1,297 @@
+--- a/include/uapi/linux/nl80211.h
++++ b/include/uapi/linux/nl80211.h
+@@ -655,6 +655,9 @@
+  *	When a security association was established on an 802.1X network using
+  *	fast transition, this event should be followed by an
+  *	%NL80211_CMD_PORT_AUTHORIZED event.
++ *	Following a %NL80211_CMD_ROAM event userspace can issue
++ *	%NL80211_CMD_GET_SCAN in order to obtain the scan information for the
++ *	new BSS the card/driver roamed to.
+  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+  *	userspace that a connection was dropped by the AP or due to other
+  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+@@ -757,7 +760,8 @@
+  *	of any other interfaces, and other interfaces will again take
+  *	precedence when they are used.
+  *
+- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
++ *	(no longer supported).
+  *
+  * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+  *	multicast to unicast conversion. When enabled, all multicast packets
+@@ -1177,6 +1181,10 @@
+  *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+  *	if the recipient acknowledged the frame.
+  *
++ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
++ *	passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
++ *	specify the wiphy index to be applied to.
++ *
+  * @NL80211_CMD_MAX: highest used command number
+  * @__NL80211_CMD_AFTER_LAST: internal use
+  */
+@@ -1407,6 +1415,8 @@ enum nl80211_commands {
+ 
+ 	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+ 
++	NL80211_CMD_SET_SAR_SPECS,
++
+ 	/* add new commands above here */
+ 
+ 	/* used to define NL80211_CMD_MAX below */
+@@ -1750,8 +1760,9 @@ enum nl80211_commands {
+  *	specify just a single bitrate, which is to be used for the beacon.
+  *	The driver must also specify support for this with the extended
+  *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
+- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HT,
++ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT and
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HE.
+  *
+  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+@@ -1955,8 +1966,15 @@ enum nl80211_commands {
+  * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+  *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+  *	to be filled by the FW.
+- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
+- *      this feature.  Currently, only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
+  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+  *      ATTR_HT_CAPABILITY to which attention should be paid.
+  *      Currently, only mac80211 NICs support this feature.
+@@ -2077,7 +2095,8 @@ enum nl80211_commands {
+  *	until the channel switch event.
+  * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+  *	must be blocked on the current channel (before the channel switch
+- *	operation).
++ *	operation). Also included in the channel switch started event if quiet
++ *	was requested by the AP.
+  * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+  *	for the time while performing a channel switch.
+  * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
+@@ -2527,6 +2546,20 @@ enum nl80211_commands {
+  *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+  *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+  *
++ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
++ *	derivation in WPA3-Personal networks which are using SAE authentication.
++ *	This is a u8 attribute that encapsulates one of the values from
++ *	&enum nl80211_sae_pwe_mechanism.
++ *
++ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
++ *	used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
++ *	of %nl80211_sar_attrs which specifies the sar type and related
++ *	sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
++ *
++ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
++ *	disassoc events to indicate that an immediate reconnect to the AP
++ *	is desired.
++ *
+  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
+  * @NL80211_ATTR_MAX: highest attribute number currently defined
+  * @__NL80211_ATTR_AFTER_LAST: internal use
+@@ -3016,6 +3049,14 @@ enum nl80211_attrs {
+ 	NL80211_ATTR_S1G_CAPABILITY,
+ 	NL80211_ATTR_S1G_CAPABILITY_MASK,
+ 
++	NL80211_ATTR_SAE_PWE,
++
++	NL80211_ATTR_RECONNECT_REQUESTED,
++
++	NL80211_ATTR_SAR_SPEC,
++
++	NL80211_ATTR_DISABLE_HE,
++
+ 	/* add attributes here, update the policy in nl80211.c */
+ 
+ 	__NL80211_ATTR_AFTER_LAST,
+@@ -5896,6 +5937,19 @@ enum nl80211_feature_flags {
+  * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+  *	unsolicited broadcast probe response transmission
+  *
++ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
++ *	configuration (AP/mesh) with HE rates.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
++ *      frame protection for all management frames exchanged during the
++ *      negotiation and range measurement procedure.
++ *
+  * @NUM_NL80211_EXT_FEATURES: number of extended features.
+  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+  */
+@@ -5956,6 +6010,10 @@ enum nl80211_ext_feature_index {
+ 	NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+ 	NL80211_EXT_FEATURE_FILS_DISCOVERY,
+ 	NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
++	NL80211_EXT_FEATURE_BEACON_RATE_HE,
++	NL80211_EXT_FEATURE_SECURE_LTF,
++	NL80211_EXT_FEATURE_SECURE_RTT,
++	NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ 
+ 	/* add new features before the definition below */
+ 	NUM_NL80211_EXT_FEATURES,
+@@ -6253,11 +6311,13 @@ struct nl80211_vendor_cmd_info {
+  * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+  * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+  * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
++ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
+  */
+ enum nl80211_tdls_peer_capability {
+ 	NL80211_TDLS_PEER_HT = 1<<0,
+ 	NL80211_TDLS_PEER_VHT = 1<<1,
+ 	NL80211_TDLS_PEER_WMM = 1<<2,
++	NL80211_TDLS_PEER_HE = 1<<3,
+ };
+ 
+ /**
+@@ -6849,6 +6909,9 @@ enum nl80211_peer_measurement_ftm_capa {
+  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+  *	ranging will be used.
++ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
++ *	valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
++ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+  *
+  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
+  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
+@@ -6867,6 +6930,7 @@ enum nl80211_peer_measurement_ftm_req {
+ 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+ 	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
+ 	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
++	NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
+ 
+ 	/* keep last */
+ 	NUM_NL80211_PMSR_FTM_REQ_ATTR,
+@@ -7124,4 +7188,115 @@ enum nl80211_unsol_bcast_probe_resp_attr
+ 	NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+ 		__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+ };
++
++/**
++ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
++ *	derivation. Applicable only when WPA3-Personal SAE authentication is
++ *	used.
++ *
++ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
++ *	attribute is not present from userspace.
++ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
++ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
++ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
++ *	can be used.
++ */
++enum nl80211_sae_pwe_mechanism {
++	NL80211_SAE_PWE_UNSPECIFIED,
++	NL80211_SAE_PWE_HUNT_AND_PECK,
++	NL80211_SAE_PWE_HASH_TO_ELEMENT,
++	NL80211_SAE_PWE_BOTH,
++};
++
++/**
++ * enum nl80211_sar_type - type of SAR specs
++ *
++ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
++ *
++ */
++enum nl80211_sar_type {
++	NL80211_SAR_TYPE_POWER,
++
++	/* add new type here */
++
++	/* Keep last */
++	NUM_NL80211_SAR_TYPE,
++};
++
++/**
++ * enum nl80211_sar_attrs - Attributes for SAR spec
++ *
++ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
++ *
++ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
++ *	limit specifications. Each specification contains a set
++ *	of %nl80211_sar_specs_attrs.
++ *
++ *	For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
++ *	and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
++ *
++ *	For sar_capa dump, it contains array of
++ *	%NL80211_SAR_ATTR_SPECS_START_FREQ
++ *	and %NL80211_SAR_ATTR_SPECS_END_FREQ.
++ *
++ * @__NL80211_SAR_ATTR_LAST: Internal
++ * @NL80211_SAR_ATTR_MAX: highest sar attribute
++ *
++ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
++ */
++enum nl80211_sar_attrs {
++	__NL80211_SAR_ATTR_INVALID,
++
++	NL80211_SAR_ATTR_TYPE,
++	NL80211_SAR_ATTR_SPECS,
++
++	__NL80211_SAR_ATTR_LAST,
++	NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
++};
++
++/**
++ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
++ *
++ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
++ *	power limit value in units of 0.25 dBm if type is
++ *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
++ *	0 means userspace doesn't have SAR limitation on this associated range.
++ *
++ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
++ *	index of exported freq range table and the associated power limitation
++ *	is applied to this range.
++ *
++ *	Userspace isn't required to set all the ranges advertised by WLAN driver,
++ *	and userspace can skip some certain ranges. These skipped ranges don't
++ *	have SAR limitations, and they are same as setting the
++ *	%NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
++ *	value higher than regulatory allowed value just means SAR power
++ *	limitation is removed, but it's required to set at least one range.
++ *	It's not allowed to set duplicated range in one SET operation.
++ *
++ *	Every SET operation overwrites previous SET operation.
++ *
++ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
++ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
++ */
++enum nl80211_sar_specs_attrs {
++	__NL80211_SAR_ATTR_SPECS_INVALID,
++
++	NL80211_SAR_ATTR_SPECS_POWER,
++	NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
++	NL80211_SAR_ATTR_SPECS_START_FREQ,
++	NL80211_SAR_ATTR_SPECS_END_FREQ,
++
++	__NL80211_SAR_ATTR_SPECS_LAST,
++	NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
++};
++
+ #endif /* __LINUX_NL80211_H */

package/kernel/mac80211/patches/subsys/300-cfg80211-support-immediate-reconnect-request-hint.patch

@@ -31,28 +31,6 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  /**
   * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame
---- a/include/uapi/linux/nl80211.h
-+++ b/include/uapi/linux/nl80211.h
-@@ -2527,6 +2527,10 @@ enum nl80211_commands {
-  *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
-  *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
-  *
-+ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
-+ *	disassoc events to indicate that an immediate reconnect to the AP
-+ *	is desired.
-+ *
-  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
-  * @NL80211_ATTR_MAX: highest attribute number currently defined
-  * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -3016,6 +3020,8 @@ enum nl80211_attrs {
- 	NL80211_ATTR_S1G_CAPABILITY,
- 	NL80211_ATTR_S1G_CAPABILITY_MASK,
- 
-+	NL80211_ATTR_RECONNECT_REQUESTED,
-+
- 	/* add attributes here, update the policy in nl80211.c */
- 
- 	__NL80211_ATTR_AFTER_LAST,
 --- a/net/mac80211/mlme.c
 +++ b/net/mac80211/mlme.c
 @@ -2734,7 +2734,7 @@ static void ieee80211_report_disconnect(

package/kernel/mac80211/patches/subsys/302-cfg80211-Add-support-to-configure-SAE-PWE-value-to-d.patch

@@ -0,0 +1,74 @@
+From: Rohan Dutta <drohan@codeaurora.org>
+Date: Tue, 27 Oct 2020 12:09:10 +0200
+Subject: [PATCH] cfg80211: Add support to configure SAE PWE value to drivers
+
+Add support to configure SAE PWE preference from userspace to drivers in
+both AP and STA modes. This is needed for cases where the driver takes
+care of Authentication frame processing (SME in the driver) so that
+correct enforcement of the acceptable PWE derivation mechanism can be
+performed.
+
+The userspace applications can pass the sae_pwe value using the
+NL80211_ATTR_SAE_PWE attribute in the NL80211_CMD_CONNECT and
+NL80211_CMD_START_AP commands to the driver. This allows selection
+between the hunting-and-pecking loop and hash-to-element options for PWE
+derivation. For backwards compatibility, this new attribute is optional
+and if not included, the driver is notified of the value being
+unspecified.
+
+Signed-off-by: Rohan Dutta <drohan@codeaurora.org>
+Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
+Link: https://lore.kernel.org/r/20201027100910.22283-1-jouni@codeaurora.org
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/include/net/cfg80211.h
++++ b/include/net/cfg80211.h
+@@ -1009,6 +1009,14 @@ struct survey_info {
+  * @sae_pwd: password for SAE authentication (for devices supporting SAE
+  *	offload)
+  * @sae_pwd_len: length of SAE password (for devices supporting SAE offload)
++ * @sae_pwe: The mechanisms allowed for SAE PWE derivation
++ *	NL80211_SAE_PWE_UNSPECIFIED: Not-specified, used to indicate userspace
++ *		did not specify any preference. The driver should follow its
++ *		internal policy in such a scenario.
++ *	NL80211_SAE_PWE_HUNT_AND_PECK: Allow hunting-and-pecking loop only
++ *	NL80211_SAE_PWE_HASH_TO_ELEMENT: Allow hash-to-element only
++ *	NL80211_SAE_PWE_BOTH: Allow either hunting-and-pecking loop
++ *		or hash-to-element
+  */
+ struct cfg80211_crypto_settings {
+ 	u32 wpa_versions;
+@@ -1027,6 +1035,7 @@ struct cfg80211_crypto_settings {
+ 	const u8 *psk;
+ 	const u8 *sae_pwd;
+ 	u8 sae_pwd_len;
++	enum nl80211_sae_pwe_mechanism sae_pwe;
+ };
+ 
+ /**
+--- a/net/wireless/nl80211.c
++++ b/net/wireless/nl80211.c
+@@ -736,6 +736,9 @@ static const struct nla_policy nl80211_p
+ 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
+ 	[NL80211_ATTR_S1G_CAPABILITY_MASK] =
+ 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
++	[NL80211_ATTR_SAE_PWE] =
++		NLA_POLICY_RANGE(NLA_U8, NL80211_SAE_PWE_HUNT_AND_PECK,
++				 NL80211_SAE_PWE_BOTH),
+ 	[NL80211_ATTR_RECONNECT_REQUESTED] = { .type = NLA_REJECT },
+ };
+ 
+@@ -9764,6 +9767,12 @@ static int nl80211_crypto_settings(struc
+ 			nla_len(info->attrs[NL80211_ATTR_SAE_PASSWORD]);
+ 	}
+ 
++	if (info->attrs[NL80211_ATTR_SAE_PWE])
++		settings->sae_pwe =
++			nla_get_u8(info->attrs[NL80211_ATTR_SAE_PWE]);
++	else
++		settings->sae_pwe = NL80211_SAE_PWE_UNSPECIFIED;
++
+ 	return 0;
+ }
+ 

package/kernel/mac80211/patches/subsys/316-mac80211-enable-QoS-support-for-nl80211-ctrl-port.patch

@@ -0,0 +1,116 @@
+From: Markus Theil <markus.theil@tu-ilmenau.de>
+Date: Sat, 6 Feb 2021 12:51:12 +0100
+Subject: [PATCH] mac80211: enable QoS support for nl80211 ctrl port
+
+This patch unifies sending control port frames
+over nl80211 and AF_PACKET sockets a little more.
+
+Before this patch, EAPOL frames got QoS prioritization
+only when using AF_PACKET sockets.
+
+__ieee80211_select_queue only selects a QoS-enabled queue
+for control port frames, when the control port protocol
+is set correctly on the skb. For the AF_PACKET path this
+works, but the nl80211 path used ETH_P_802_3.
+
+Another check for injected frames in wme.c then prevented
+the QoS TID to be copied in the frame.
+
+In order to fix this, get rid of the frame injection marking
+for nl80211 ctrl port and set the correct ethernet protocol.
+
+Please note:
+An erlier version of this path tried to prevent
+frame aggregation for control port frames in order to speed up
+the initial connection setup a little. This seemed to cause
+issues on my older Intel dvm-based hardware, and was therefore
+removed again. Future commits which try to reintroduce this
+have to check carefully how hw behaves with aggregated and
+non-aggregated traffic for the same TID.
+My NIC: Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
+
+Reported-by: kernel test robot <lkp@intel.com>
+Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
+Link: https://lore.kernel.org/r/20210206115112.567881-1-markus.theil@tu-ilmenau.de
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/mac80211/status.c
++++ b/net/mac80211/status.c
+@@ -628,16 +628,12 @@ static void ieee80211_report_ack_skb(str
+ 		u64 cookie = IEEE80211_SKB_CB(skb)->ack.cookie;
+ 		struct ieee80211_sub_if_data *sdata;
+ 		struct ieee80211_hdr *hdr = (void *)skb->data;
+-		__be16 ethertype = 0;
+-
+-		if (skb->len >= ETH_HLEN && skb->protocol == cpu_to_be16(ETH_P_802_3))
+-			skb_copy_bits(skb, 2 * ETH_ALEN, &ethertype, ETH_TLEN);
+ 
+ 		rcu_read_lock();
+ 		sdata = ieee80211_sdata_from_skb(local, skb);
+ 		if (sdata) {
+-			if (ethertype == sdata->control_port_protocol ||
+-			    ethertype == cpu_to_be16(ETH_P_PREAUTH))
++			if (skb->protocol == sdata->control_port_protocol ||
++			    skb->protocol == cpu_to_be16(ETH_P_PREAUTH))
+ 				cfg80211_control_port_tx_status(&sdata->wdev,
+ 								cookie,
+ 								skb->data,
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1195,9 +1195,7 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 			tx->sta = rcu_dereference(sdata->u.vlan.sta);
+ 			if (!tx->sta && sdata->wdev.use_4addr)
+ 				return TX_DROP;
+-		} else if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX |
+-					  IEEE80211_TX_CTL_INJECTED) ||
+-			   tx->sdata->control_port_protocol == tx->skb->protocol) {
++		} else if (tx->sdata->control_port_protocol == tx->skb->protocol) {
+ 			tx->sta = sta_info_get_bss(sdata, hdr->addr1);
+ 		}
+ 		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
+@@ -5421,6 +5419,7 @@ int ieee80211_tx_control_port(struct wip
+ {
+ 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ 	struct ieee80211_local *local = sdata->local;
++	struct sta_info *sta;
+ 	struct sk_buff *skb;
+ 	struct ethhdr *ehdr;
+ 	u32 ctrl_flags = 0;
+@@ -5443,8 +5442,7 @@ int ieee80211_tx_control_port(struct wip
+ 	if (cookie)
+ 		ctrl_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+ 
+-	flags |= IEEE80211_TX_INTFL_NL80211_FRAME_TX |
+-		 IEEE80211_TX_CTL_INJECTED;
++	flags |= IEEE80211_TX_INTFL_NL80211_FRAME_TX;
+ 
+ 	skb = dev_alloc_skb(local->hw.extra_tx_headroom +
+ 			    sizeof(struct ethhdr) + len);
+@@ -5461,10 +5459,25 @@ int ieee80211_tx_control_port(struct wip
+ 	ehdr->h_proto = proto;
+ 
+ 	skb->dev = dev;
+-	skb->protocol = htons(ETH_P_802_3);
++	skb->protocol = proto;
+ 	skb_reset_network_header(skb);
+ 	skb_reset_mac_header(skb);
+ 
++	/* update QoS header to prioritize control port frames if possible,
++	 * priorization also happens for control port frames send over
++	 * AF_PACKET
++	 */
++	rcu_read_lock();
++
++	if (ieee80211_lookup_ra_sta(sdata, skb, &sta) == 0 && !IS_ERR(sta)) {
++		u16 queue = __ieee80211_select_queue(sdata, sta, skb);
++
++		skb_set_queue_mapping(skb, queue);
++		skb_get_hash(skb);
++	}
++
++	rcu_read_unlock();
++
+ 	/* mutex lock is only needed for incrementing the cookie counter */
+ 	mutex_lock(&local->mtx);
+ 

package/kernel/mac80211/patches/subsys/371-mac80211-don-t-apply-flow-control-on-management-fram.patch

@@ -28,7 +28,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
   *
   * Transmit and frame generation functions.
   */
-@@ -1403,8 +1403,17 @@ static void ieee80211_txq_enqueue(struct
+@@ -1401,8 +1401,17 @@ static void ieee80211_txq_enqueue(struct
  	ieee80211_set_skb_enqueue_time(skb);
  
  	spin_lock_bh(&fq->lock);
@@ -48,7 +48,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	spin_unlock_bh(&fq->lock);
  }
  
-@@ -3846,6 +3855,9 @@ bool ieee80211_txq_airtime_check(struct
+@@ -3844,6 +3853,9 @@ bool ieee80211_txq_airtime_check(struct
  	if (!txq->sta)
  		return true;
  

package/kernel/mac80211/patches/subsys/372-mac80211-set-sk_pacing_shift-for-802.3-txpath.patch

@@ -9,7 +9,7 @@ Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
 
 --- a/net/mac80211/tx.c
 +++ b/net/mac80211/tx.c
-@@ -4173,6 +4173,9 @@ static bool ieee80211_tx_8023(struct iee
+@@ -4171,6 +4171,9 @@ static bool ieee80211_tx_8023(struct iee
  	unsigned long flags;
  	int q = info->hw_queue;
  

package/kernel/mac80211/patches/subsys/374-mac80211-move-A-MPDU-session-check-from-minstrel_ht-.patch

@@ -0,0 +1,126 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 17 Jun 2021 17:56:54 +0200
+Subject: [PATCH] mac80211: move A-MPDU session check from minstrel_ht to
+ mac80211
+
+This avoids calling back into tx handlers from within the rate control module.
+Preparation for deferring rate control until tx dequeue
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/include/net/mac80211.h
++++ b/include/net/mac80211.h
+@@ -6160,6 +6160,11 @@ enum rate_control_capabilities {
+ 	 * otherwise the NSS difference doesn't bother us.
+ 	 */
+ 	RATE_CTRL_CAPA_VHT_EXT_NSS_BW = BIT(0),
++	/**
++	 * @RATE_CTRL_CAPA_AMPDU_TRIGGER:
++	 * mac80211 should start A-MPDU sessions on tx
++	 */
++	RATE_CTRL_CAPA_AMPDU_TRIGGER = BIT(1),
+ };
+ 
+ struct rate_control_ops {
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -1153,29 +1153,6 @@ minstrel_downgrade_prob_rate(struct mins
+ }
+ 
+ static void
+-minstrel_aggr_check(struct ieee80211_sta *pubsta, struct sk_buff *skb)
+-{
+-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+-	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
+-	u16 tid;
+-
+-	if (skb_get_queue_mapping(skb) == IEEE80211_AC_VO)
+-		return;
+-
+-	if (unlikely(!ieee80211_is_data_qos(hdr->frame_control)))
+-		return;
+-
+-	if (unlikely(skb->protocol == cpu_to_be16(ETH_P_PAE)))
+-		return;
+-
+-	tid = ieee80211_get_tid(hdr);
+-	if (likely(sta->ampdu_mlme.tid_tx[tid]))
+-		return;
+-
+-	ieee80211_start_tx_ba_session(pubsta, tid, 0);
+-}
+-
+-static void
+ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband,
+                       void *priv_sta, struct ieee80211_tx_status *st)
+ {
+@@ -1477,10 +1454,6 @@ minstrel_ht_get_rate(void *priv, struct
+ 	struct minstrel_priv *mp = priv;
+ 	u16 sample_idx;
+ 
+-	if (!(info->flags & IEEE80211_TX_CTL_AMPDU) &&
+-	    !minstrel_ht_is_legacy_group(MI_RATE_GROUP(mi->max_prob_rate)))
+-		minstrel_aggr_check(sta, txrc->skb);
+-
+ 	info->flags |= mi->tx_flags;
+ 
+ #ifdef CPTCFG_MAC80211_DEBUGFS
+@@ -1894,6 +1867,7 @@ static u32 minstrel_ht_get_expected_thro
+ 
+ static const struct rate_control_ops mac80211_minstrel_ht = {
+ 	.name = "minstrel_ht",
++	.capa = RATE_CTRL_CAPA_AMPDU_TRIGGER,
+ 	.tx_status_ext = minstrel_ht_tx_status,
+ 	.get_rate = minstrel_ht_get_rate,
+ 	.rate_init = minstrel_ht_rate_init,
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -3931,6 +3931,29 @@ void ieee80211_txq_schedule_start(struct
+ }
+ EXPORT_SYMBOL(ieee80211_txq_schedule_start);
+ 
++static void
++ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
++		     struct sta_info *sta,
++		     struct sk_buff *skb)
++{
++	struct rate_control_ref *ref = sdata->local->rate_ctrl;
++	u16 tid;
++
++	if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER))
++		return;
++
++	if (!sta || !sta->sta.ht_cap.ht_supported ||
++	    !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO ||
++	    skb->protocol == sdata->control_port_protocol)
++		return;
++
++	tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
++	if (likely(sta->ampdu_mlme.tid_tx[tid]))
++		return;
++
++	ieee80211_start_tx_ba_session(&sta->sta, tid, 0);
++}
++
+ void __ieee80211_subif_start_xmit(struct sk_buff *skb,
+ 				  struct net_device *dev,
+ 				  u32 info_flags,
+@@ -3961,6 +3984,8 @@ void __ieee80211_subif_start_xmit(struct
+ 		skb_get_hash(skb);
+ 	}
+ 
++	ieee80211_aggr_check(sdata, sta, skb);
++
+ 	if (sta) {
+ 		struct ieee80211_fast_tx *fast_tx;
+ 
+@@ -4224,6 +4249,8 @@ static void ieee80211_8023_xmit(struct i
+ 
+ 	memset(info, 0, sizeof(*info));
+ 
++	ieee80211_aggr_check(sdata, sta, skb);
++
+ 	tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+ 	tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
+ 	if (tid_tx) {

package/kernel/mac80211/patches/subsys/375-mac80211-call-ieee80211_tx_h_rate_ctrl-when-dequeue.patch

@@ -0,0 +1,114 @@
+From: Ryder Lee <ryder.lee@mediatek.com>
+Date: Fri, 28 May 2021 14:05:41 +0800
+Subject: [PATCH] mac80211: call ieee80211_tx_h_rate_ctrl() when dequeue
+
+Make ieee80211_tx_h_rate_ctrl() get called on dequeue to improve
+performance since it reduces the turnaround time for rate control.
+
+Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
+---
+
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1778,8 +1778,6 @@ static int invoke_tx_handlers_early(stru
+ 	CALL_TXH(ieee80211_tx_h_ps_buf);
+ 	CALL_TXH(ieee80211_tx_h_check_control_port_protocol);
+ 	CALL_TXH(ieee80211_tx_h_select_key);
+-	if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL))
+-		CALL_TXH(ieee80211_tx_h_rate_ctrl);
+ 
+  txh_done:
+ 	if (unlikely(res == TX_DROP)) {
+@@ -1812,6 +1810,9 @@ static int invoke_tx_handlers_late(struc
+ 		goto txh_done;
+ 	}
+ 
++	if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL))
++		CALL_TXH(ieee80211_tx_h_rate_ctrl);
++
+ 	CALL_TXH(ieee80211_tx_h_michael_mic_add);
+ 	CALL_TXH(ieee80211_tx_h_sequence);
+ 	CALL_TXH(ieee80211_tx_h_fragment);
+@@ -3382,15 +3383,21 @@ out:
+  * Can be called while the sta lock is held. Anything that can cause packets to
+  * be generated will cause deadlock!
+  */
+-static void ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata,
+-				       struct sta_info *sta, u8 pn_offs,
+-				       struct ieee80211_key *key,
+-				       struct sk_buff *skb)
++static ieee80211_tx_result
++ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata,
++			   struct sta_info *sta, u8 pn_offs,
++			   struct ieee80211_key *key,
++			   struct ieee80211_tx_data *tx)
+ {
++	struct sk_buff *skb = tx->skb;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ 	struct ieee80211_hdr *hdr = (void *)skb->data;
+ 	u8 tid = IEEE80211_NUM_TIDS;
+ 
++	if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL) &&
++	    ieee80211_tx_h_rate_ctrl(tx) != TX_CONTINUE)
++		return TX_DROP;
++
+ 	if (key)
+ 		info->control.hw_key = &key->conf;
+ 
+@@ -3439,6 +3446,8 @@ static void ieee80211_xmit_fast_finish(s
+ 			break;
+ 		}
+ 	}
++
++	return TX_CONTINUE;
+ }
+ 
+ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
+@@ -3542,24 +3551,17 @@ static bool ieee80211_xmit_fast(struct i
+ 	tx.sta = sta;
+ 	tx.key = fast_tx->key;
+ 
+-	if (!ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) {
+-		tx.skb = skb;
+-		r = ieee80211_tx_h_rate_ctrl(&tx);
+-		skb = tx.skb;
+-		tx.skb = NULL;
+-
+-		if (r != TX_CONTINUE) {
+-			if (r != TX_QUEUED)
+-				kfree_skb(skb);
+-			return true;
+-		}
+-	}
+-
+ 	if (ieee80211_queue_skb(local, sdata, sta, skb))
+ 		return true;
+ 
+-	ieee80211_xmit_fast_finish(sdata, sta, fast_tx->pn_offs,
+-				   fast_tx->key, skb);
++	tx.skb = skb;
++	r = ieee80211_xmit_fast_finish(sdata, sta, fast_tx->pn_offs,
++				       fast_tx->key, &tx);
++	tx.skb = NULL;
++	if (r == TX_DROP) {
++		kfree_skb(skb);
++		return true;
++	}
+ 
+ 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ 		sdata = container_of(sdata->bss,
+@@ -3670,8 +3672,12 @@ begin:
+ 		    (tx.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+ 			pn_offs = ieee80211_hdrlen(hdr->frame_control);
+ 
+-		ieee80211_xmit_fast_finish(sta->sdata, sta, pn_offs,
+-					   tx.key, skb);
++		r = ieee80211_xmit_fast_finish(sta->sdata, sta, pn_offs,
++					       tx.key, &tx);
++		if (r != TX_CONTINUE) {
++			ieee80211_free_txskb(&local->hw, skb);
++			goto begin;
++		}
+ 	} else {
+ 		if (invoke_tx_handlers_late(&tx))
+ 			goto begin;

package/kernel/mac80211/patches/subsys/376-mac80211-add-rate-control-support-for-encap-offload.patch

@@ -0,0 +1,119 @@
+From: Ryder Lee <ryder.lee@mediatek.com>
+Date: Fri, 28 May 2021 14:05:43 +0800
+Subject: [PATCH] mac80211: add rate control support for encap offload
+
+The software rate control cannot deal with encap offload, so fix it.
+
+Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
+---
+
+--- a/net/mac80211/ieee80211_i.h
++++ b/net/mac80211/ieee80211_i.h
+@@ -2024,6 +2024,15 @@ static inline void ieee80211_tx_skb(stru
+ 	ieee80211_tx_skb_tid(sdata, skb, 7);
+ }
+ 
++static inline bool ieee80211_is_tx_data(struct sk_buff *skb)
++{
++	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
++	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
++
++	return info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP ||
++	       ieee80211_is_data(hdr->frame_control);
++}
++
+ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
+ 			       struct ieee802_11_elems *elems,
+ 			       u64 filter, u32 crc, u8 *transmitter_bssid,
+--- a/net/mac80211/rate.c
++++ b/net/mac80211/rate.c
+@@ -297,15 +297,11 @@ void ieee80211_check_rate_mask(struct ie
+ static bool rc_no_data_or_no_ack_use_min(struct ieee80211_tx_rate_control *txrc)
+ {
+ 	struct sk_buff *skb = txrc->skb;
+-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+-	__le16 fc;
+-
+-	fc = hdr->frame_control;
+ 
+ 	return (info->flags & (IEEE80211_TX_CTL_NO_ACK |
+ 			       IEEE80211_TX_CTL_USE_MINRATE)) ||
+-		!ieee80211_is_data(fc);
++		!ieee80211_is_tx_data(skb);
+ }
+ 
+ static void rc_send_low_basicrate(struct ieee80211_tx_rate *rate,
+@@ -870,7 +866,6 @@ void ieee80211_get_tx_rates(struct ieee8
+ 			    int max_rates)
+ {
+ 	struct ieee80211_sub_if_data *sdata;
+-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ 	struct ieee80211_supported_band *sband;
+ 
+@@ -882,7 +877,7 @@ void ieee80211_get_tx_rates(struct ieee8
+ 	sdata = vif_to_sdata(vif);
+ 	sband = sdata->local->hw.wiphy->bands[info->band];
+ 
+-	if (ieee80211_is_data(hdr->frame_control))
++	if (ieee80211_is_tx_data(skb))
+ 		rate_control_apply_mask(sdata, sta, sband, dest, max_rates);
+ 
+ 	if (dest[0].idx < 0)
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -679,6 +679,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 	u32 len;
+ 	struct ieee80211_tx_rate_control txrc;
+ 	struct ieee80211_sta_rates *ratetbl = NULL;
++	bool encap = info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP;
+ 	bool assoc = false;
+ 
+ 	memset(&txrc, 0, sizeof(txrc));
+@@ -720,7 +721,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 	 * just wants a probe response.
+ 	 */
+ 	if (tx->sdata->vif.bss_conf.use_short_preamble &&
+-	    (ieee80211_is_data(hdr->frame_control) ||
++	    (ieee80211_is_tx_data(tx->skb) ||
+ 	     (tx->sta && test_sta_flag(tx->sta, WLAN_STA_SHORT_PREAMBLE))))
+ 		txrc.short_preamble = true;
+ 
+@@ -742,7 +743,8 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 		 "%s: Dropped data frame as no usable bitrate found while "
+ 		 "scanning and associated. Target station: "
+ 		 "%pM on %d GHz band\n",
+-		 tx->sdata->name, hdr->addr1,
++		 tx->sdata->name,
++		 encap ? ((struct ethhdr *)hdr)->h_dest : hdr->addr1,
+ 		 info->band ? 5 : 2))
+ 		return TX_DROP;
+ 
+@@ -776,7 +778,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 
+ 	if (txrc.reported_rate.idx < 0) {
+ 		txrc.reported_rate = tx->rate;
+-		if (tx->sta && ieee80211_is_data(hdr->frame_control))
++		if (tx->sta && ieee80211_is_tx_data(tx->skb))
+ 			tx->sta->tx_stats.last_rate = txrc.reported_rate;
+ 	} else if (tx->sta)
+ 		tx->sta->tx_stats.last_rate = txrc.reported_rate;
+@@ -3660,8 +3662,16 @@ begin:
+ 	else
+ 		info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+ 
+-	if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP)
++	if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) {
++		if (!ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) {
++			r = ieee80211_tx_h_rate_ctrl(&tx);
++			if (r != TX_CONTINUE) {
++				ieee80211_free_txskb(&local->hw, skb);
++				goto begin;
++			}
++		}
+ 		goto encap_out;
++	}
+ 
+ 	if (info->control.flags & IEEE80211_TX_CTRL_FAST_XMIT) {
+ 		struct sta_info *sta = container_of(txq->sta, struct sta_info,

package/kernel/mac80211/patches/subsys/377-mac80211-minstrel_ht-fix-sample-time-check.patch

@@ -0,0 +1,23 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 17 Jun 2021 12:05:54 +0200
+Subject: [PATCH] mac80211: minstrel_ht: fix sample time check
+
+We need to skip sampling if the next sample time is after jiffies, not before.
+This patch fixes an issue where in some cases only very little sampling (or none
+at all) is performed, leading to really bad data rates
+
+Fixes: 80d55154b2f8 ("mac80211: minstrel_ht: significantly redesign the rate probing strategy")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -1466,7 +1466,7 @@ minstrel_ht_get_rate(void *priv, struct
+ 	    (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO))
+ 		return;
+ 
+-	if (time_is_before_jiffies(mi->sample_time))
++	if (time_is_after_jiffies(mi->sample_time))
+ 		return;
+ 
+ 	mi->sample_time = jiffies + MINSTREL_SAMPLE_INTERVAL;

package/kernel/mac80211/patches/subsys/378-mac80211-remove-iwlwifi-specific-workaround-that-bro.patch

@@ -0,0 +1,51 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 19 Jun 2021 12:10:14 +0200
+Subject: [PATCH] mac80211: remove iwlwifi specific workaround that broke sta
+ NDP tx
+
+Sending nulldata packets is important for sw AP link probing and detecting
+4-address mode links. The checks that dropped these packets were apparently
+added to work around an iwlwifi firmware bug with multi-TID aggregation.
+
+Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
+Cc: stable@vger.kernel.org
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
++++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+@@ -1085,6 +1085,9 @@ static int iwl_mvm_tx_mpdu(struct iwl_mv
+ 	if (WARN_ON_ONCE(mvmsta->sta_id == IWL_MVM_INVALID_STA))
+ 		return -1;
+ 
++	if (unlikely(ieee80211_is_any_nullfunc(fc)) && sta->he_cap.has_he)
++		return -1;
++
+ 	if (unlikely(ieee80211_is_probe_resp(fc)))
+ 		iwl_mvm_probe_resp_set_noa(mvm, skb);
+ 
+--- a/net/mac80211/mlme.c
++++ b/net/mac80211/mlme.c
+@@ -1094,11 +1094,6 @@ void ieee80211_send_nullfunc(struct ieee
+ 	struct ieee80211_hdr_3addr *nullfunc;
+ 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ 
+-	/* Don't send NDPs when STA is connected HE */
+-	if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+-	    !(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
+-		return;
+-
+ 	skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif,
+ 		!ieee80211_hw_check(&local->hw, DOESNT_SUPPORT_QOS_NDP));
+ 	if (!skb)
+@@ -1130,10 +1125,6 @@ static void ieee80211_send_4addr_nullfun
+ 	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+ 		return;
+ 
+-	/* Don't send NDPs when connected HE */
+-	if (!(sdata->u.mgd.flags & IEEE80211_STA_DISABLE_HE))
+-		return;
+-
+ 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
+ 	if (!skb)
+ 		return;

package/kernel/mac80211/patches/subsys/379-mac80211-fix-starting-aggregation-sessions-on-mesh-i.patch

@@ -0,0 +1,112 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 29 Jun 2021 13:25:09 +0200
+Subject: [PATCH] mac80211: fix starting aggregation sessions on mesh
+ interfaces
+
+The logic for starting aggregation sessions was recently moved from minstrel_ht
+to mac80211, into the subif tx handler just after the sta lookup.
+Unfortunately this didn't work for mesh interfaces, since the sta lookup is
+deferred until a much later point in time on those.
+Fix this by also calling the aggregation check right after the deferred sta
+lookup.
+
+Fixes: 08a46c642001 ("mac80211: move A-MPDU session check from minstrel_ht to mac80211")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1159,6 +1159,29 @@ static bool ieee80211_tx_prep_agg(struct
+ 	return queued;
+ }
+ 
++static void
++ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
++		     struct sta_info *sta,
++		     struct sk_buff *skb)
++{
++	struct rate_control_ref *ref = sdata->local->rate_ctrl;
++	u16 tid;
++
++	if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER))
++		return;
++
++	if (!sta || !sta->sta.ht_cap.ht_supported ||
++	    !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO ||
++	    skb->protocol == sdata->control_port_protocol)
++		return;
++
++	tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
++	if (likely(sta->ampdu_mlme.tid_tx[tid]))
++		return;
++
++	ieee80211_start_tx_ba_session(&sta->sta, tid, 0);
++}
++
+ /*
+  * initialises @tx
+  * pass %NULL for the station if unknown, a valid pointer if known
+@@ -1172,6 +1195,7 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 	struct ieee80211_local *local = sdata->local;
+ 	struct ieee80211_hdr *hdr;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
++	bool aggr_check = false;
+ 	int tid;
+ 
+ 	memset(tx, 0, sizeof(*tx));
+@@ -1200,8 +1224,10 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 		} else if (tx->sdata->control_port_protocol == tx->skb->protocol) {
+ 			tx->sta = sta_info_get_bss(sdata, hdr->addr1);
+ 		}
+-		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
++		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1)) {
+ 			tx->sta = sta_info_get(sdata, hdr->addr1);
++			aggr_check = true;
++		}
+ 	}
+ 
+ 	if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) &&
+@@ -1211,8 +1237,12 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 		struct tid_ampdu_tx *tid_tx;
+ 
+ 		tid = ieee80211_get_tid(hdr);
+-
+ 		tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]);
++		if (!tid_tx && aggr_check) {
++			ieee80211_aggr_check(sdata, tx->sta, skb);
++			tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]);
++		}
++
+ 		if (tid_tx) {
+ 			bool queued;
+ 
+@@ -3947,29 +3977,6 @@ void ieee80211_txq_schedule_start(struct
+ }
+ EXPORT_SYMBOL(ieee80211_txq_schedule_start);
+ 
+-static void
+-ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
+-		     struct sta_info *sta,
+-		     struct sk_buff *skb)
+-{
+-	struct rate_control_ref *ref = sdata->local->rate_ctrl;
+-	u16 tid;
+-
+-	if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER))
+-		return;
+-
+-	if (!sta || !sta->sta.ht_cap.ht_supported ||
+-	    !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO ||
+-	    skb->protocol == sdata->control_port_protocol)
+-		return;
+-
+-	tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
+-	if (likely(sta->ampdu_mlme.tid_tx[tid]))
+-		return;
+-
+-	ieee80211_start_tx_ba_session(&sta->sta, tid, 0);
+-}
+-
+ void __ieee80211_subif_start_xmit(struct sk_buff *skb,
+ 				  struct net_device *dev,
+ 				  u32 info_flags,

package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch

@@ -1,6 +1,6 @@
 --- a/include/net/cfg80211.h
 +++ b/include/net/cfg80211.h
-@@ -3736,6 +3736,7 @@ struct mgmt_frame_regs {
+@@ -3745,6 +3745,7 @@ struct mgmt_frame_regs {
   *	(as advertised by the nl80211 feature flag.)
   * @get_tx_power: store the current TX power into the dbm variable;
   *	return 0 if successful
@@ -8,7 +8,7 @@
   *
   * @set_wds_peer: set the WDS peer for a WDS interface
   *
-@@ -4058,6 +4059,7 @@ struct cfg80211_ops {
+@@ -4067,6 +4068,7 @@ struct cfg80211_ops {
  				enum nl80211_tx_power_setting type, int mbm);
  	int	(*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
  				int *dbm);
@@ -36,7 +36,7 @@
  	u8 ps_dtim_period;
 --- a/include/uapi/linux/nl80211.h
 +++ b/include/uapi/linux/nl80211.h
-@@ -2531,6 +2531,9 @@ enum nl80211_commands {
+@@ -2560,6 +2560,9 @@ enum nl80211_commands {
   *	disassoc events to indicate that an immediate reconnect to the AP
   *	is desired.
   *
@@ -46,9 +46,9 @@
   * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -3022,6 +3025,8 @@ enum nl80211_attrs {
+@@ -3057,6 +3060,8 @@ enum nl80211_attrs {
  
- 	NL80211_ATTR_RECONNECT_REQUESTED,
+ 	NL80211_ATTR_DISABLE_HE,
  
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 +
@@ -129,15 +129,15 @@
  	local->hw.max_mtu = IEEE80211_MAX_DATA_LEN;
 --- a/net/wireless/nl80211.c
 +++ b/net/wireless/nl80211.c
-@@ -737,6 +737,7 @@ static const struct nla_policy nl80211_p
- 	[NL80211_ATTR_S1G_CAPABILITY_MASK] =
- 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
+@@ -740,6 +740,7 @@ static const struct nla_policy nl80211_p
+ 		NLA_POLICY_RANGE(NLA_U8, NL80211_SAE_PWE_HUNT_AND_PECK,
+ 				 NL80211_SAE_PWE_BOTH),
  	[NL80211_ATTR_RECONNECT_REQUESTED] = { .type = NLA_REJECT },
 +	[NL80211_ATTR_WIPHY_ANTENNA_GAIN] = { .type = NLA_U32 },
  };
  
  /* policy for the key attributes */
-@@ -3245,6 +3246,20 @@ static int nl80211_set_wiphy(struct sk_b
+@@ -3248,6 +3249,20 @@ static int nl80211_set_wiphy(struct sk_b
  		if (result)
  			return result;
  	}

package/kernel/mt76/Makefile

@@ -8,9 +8,9 @@ PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/openwrt/mt76
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-05-15
-PKG_SOURCE_VERSION:=9d736545bb5ac9707e60b7900b7d6b290492e24d
-PKG_MIRROR_HASH:=8fd98f488579c18cfd8c442cff1796dcd70e2ecbc59c5d5b92ee8c0f06efafcf
+PKG_SOURCE_DATE:=2021-06-06
+PKG_SOURCE_VERSION:=22b690334c0f49b11534cc2e331c9d5e17c4a0bc
+PKG_MIRROR_HASH:=ff5e563935919d2e40c1e7254ef3bc06f7ecc5e69f8ddd12903e8f5de942d630
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_BUILD_PARALLEL:=1
@@ -155,7 +155,7 @@ define KernelPackage/mt7615-common
   $(KernelPackage/mt76-default)
   TITLE:=MediaTek MT7615 wireless driver common code
   HIDDEN:=1
-  DEPENDS+=@PCI_SUPPORT +kmod-mt76-core +kmod-mt76-connac
+  DEPENDS+=@PCI_SUPPORT +kmod-mt76-core +kmod-mt76-connac +kmod-hwmon-core
   FILES:= $(PKG_BUILD_DIR)/mt7615/mt7615-common.ko
 endef
 
@@ -213,7 +213,7 @@ endef
 define KernelPackage/mt7915e
   $(KernelPackage/mt76-default)
   TITLE:=MediaTek MT7915e wireless driver
-  DEPENDS+=@PCI_SUPPORT +kmod-mt7615-common +@DRIVER_11AX_SUPPORT
+  DEPENDS+=@PCI_SUPPORT +kmod-mt7615-common +kmod-hwmon-core +kmod-thermal +@DRIVER_11AX_SUPPORT
   FILES:= $(PKG_BUILD_DIR)/mt7915/mt7915e.ko
   AUTOLOAD:=$(call AutoProbe,mt7915e)
 endef

package/libs/libjson-c/Makefile

@@ -20,7 +20,6 @@ PKG_LICENSE:=MIT
 PKG_LICENSE_FILES:=COPYING
 PKG_CPE_ID:=cpe:/a:json-c_project:json-c
 
-PKG_FLAGS := nonshared
 PKG_BUILD_PARALLEL:=1
 HOST_BUILD_PREFIX:=$(STAGING_DIR_HOST)
 

package/libs/libnl-tiny/Makefile

@@ -17,8 +17,6 @@ PKG_SOURCE_VERSION:=c291088f631d1694f7ba0444b59677b194348da8
 PKG_MIRROR_HASH:=99bcce12701bb34dadb39689d95c2c5cf1e27719d0ecfd645d3957a8947025ac
 CMAKE_INSTALL:=1
 
-PKG_FLAGS := nonshared
-
 PKG_LICENSE:=LGPL-2.1
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/libs/libubox/Makefile

@@ -11,8 +11,6 @@ PKG_SOURCE_VERSION:=b14c4688612c05c78ce984d7bde633bce8703b1e
 PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
 CMAKE_INSTALL:=1
 
-PKG_FLAGS := nonshared
-
 PKG_LICENSE:=ISC
 PKG_LICENSE_FILES:=
 

package/libs/libusb/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libusb
 PKG_VERSION:=1.0.24
-PKG_RELEASE:=1
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=\

package/libs/libusb/patches/001-Correct-a-typo-in-the-Changelog-and-clean-up-a-stray.patch

@@ -0,0 +1,29 @@
+From 369af149e3ad92514a2d24f112cedfeb7acaf558 Mon Sep 17 00:00:00 2001
+From: Chris Dickens <christopher.a.dickens@gmail.com>
+Date: Sun, 13 Dec 2020 15:46:27 -0800
+Subject: [PATCH] Correct a typo in the Changelog and clean up a stray file
+
+Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
+---
+ ChangeLog             | 2 +-
+ libusb/version_nano.h | 2 +-
+ test                  | 0
+ 3 files changed, 2 insertions(+), 2 deletions(-)
+ delete mode 100644 test
+
+--- a/ChangeLog
++++ b/ChangeLog
+@@ -12,7 +12,7 @@ visit: http://log.libusb.info
+ * Darwin (macOS): use IOUSBDevice as darwin_device_class explicitly (#693)
+ * Linux: Drop support for kernel older than 2.6.32
+ * Linux: Provide an event thread name (#689)
+-* Linux: Wait until all USBs have been reaped before freeing them (#607)
++* Linux: Wait until all URBs have been reaped before freeing them (#607)
+ * NetBSD: Recognize device timeouts (#710)
+ * OpenBSD: Allow opening ugen devices multiple times (#763)
+ * OpenBSD: Support libusb_get_port_number() (#764)
+--- a/libusb/version_nano.h
++++ b/libusb/version_nano.h
+@@ -1 +1 @@
+-#define LIBUSB_NANO 11584
++#define LIBUSB_NANO 11585

package/libs/libusb/patches/002-linux_usbfs-Fix-parsing-of-descriptors-for-multi-con.patch

@@ -0,0 +1,61 @@
+From f6d2cb561402c3b6d3627c0eb89e009b503d9067 Mon Sep 17 00:00:00 2001
+From: Chris Dickens <christopher.a.dickens@gmail.com>
+Date: Sun, 13 Dec 2020 15:49:19 -0800
+Subject: [PATCH] linux_usbfs: Fix parsing of descriptors for
+ multi-configuration devices
+
+Commit e2be556bd2 ("linux_usbfs: Parse config descriptors during device
+initialization") introduced a regression for devices with multiple
+configurations. The logic that verifies the reported length of the
+configuration descriptors failed to count the length of the
+configuration descriptor itself and would truncate the actual length by
+9 bytes, leading to a parsing error for subsequent descriptors.
+
+Closes #825
+
+Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
+---
+ libusb/os/linux_usbfs.c | 12 ++++++++----
+ libusb/version_nano.h   |  2 +-
+ 2 files changed, 9 insertions(+), 5 deletions(-)
+
+--- a/libusb/os/linux_usbfs.c
++++ b/libusb/os/linux_usbfs.c
+@@ -641,7 +641,12 @@ static int seek_to_next_config(struct li
+ 	uint8_t *buffer, size_t len)
+ {
+ 	struct usbi_descriptor_header *header;
+-	int offset = 0;
++	int offset;
++
++	/* Start seeking past the config descriptor */
++	offset = LIBUSB_DT_CONFIG_SIZE;
++	buffer += LIBUSB_DT_CONFIG_SIZE;
++	len -= LIBUSB_DT_CONFIG_SIZE;
+ 
+ 	while (len > 0) {
+ 		if (len < 2) {
+@@ -718,7 +723,7 @@ static int parse_config_descriptors(stru
+ 		}
+ 
+ 		if (priv->sysfs_dir) {
+-			 /*
++			/*
+ 			 * In sysfs wTotalLength is ignored, instead the kernel returns a
+ 			 * config descriptor with verified bLength fields, with descriptors
+ 			 * with an invalid bLength removed.
+@@ -727,8 +732,7 @@ static int parse_config_descriptors(stru
+ 			int offset;
+ 
+ 			if (num_configs > 1 && idx < num_configs - 1) {
+-				offset = seek_to_next_config(ctx, buffer + LIBUSB_DT_CONFIG_SIZE,
+-							     remaining - LIBUSB_DT_CONFIG_SIZE);
++				offset = seek_to_next_config(ctx, buffer, remaining);
+ 				if (offset < 0)
+ 					return offset;
+ 				sysfs_config_len = (uint16_t)offset;
+--- a/libusb/version_nano.h
++++ b/libusb/version_nano.h
+@@ -1 +1 @@
+-#define LIBUSB_NANO 11585
++#define LIBUSB_NANO 11586

package/libs/mbedtls/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=mbedtls
-PKG_VERSION:=2.16.10
-PKG_RELEASE:=1
+PKG_VERSION:=2.16.11
+PKG_RELEASE:=$(AUTORELEASE)
 PKG_USE_MIPS16:=0
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/ARMmbed/mbedtls/tar.gz/v$(PKG_VERSION)?
-PKG_HASH:=96257bb03b30300b2f35f861ffe204ed957e9fd0329d80646fe57fc49f589b29
+PKG_HASH:=c18e7e9abf95e69e425260493720470021384a1728417042060a35d0b7b18b41
 
 PKG_BUILD_PARALLEL:=1
 PKG_LICENSE:=GPL-2.0-or-later

package/libs/openssl/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=openssl
 PKG_BASE:=1.1.1
-PKG_BUGFIX:=k
+PKG_BUGFIX:=l
 PKG_VERSION:=$(PKG_BASE)$(PKG_BUGFIX)
 PKG_RELEASE:=1
 PKG_USE_MIPS16:=0
@@ -26,7 +26,7 @@ PKG_SOURCE_URL:= \
 	ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/ \
 	ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/old/$(PKG_BASE)/
 
-PKG_HASH:=892a0875b9872acd04a9fde79b1f943075d5ea162415de3047c327df33fbaee5
+PKG_HASH:=0b7a3e5e59c34827fe0c3a74b7ec8baef302b98fa80088d7f9153aa16fa76bd1
 
 PKG_LICENSE:=OpenSSL
 PKG_LICENSE_FILES:=LICENSE

package/libs/openssl/patches/410-eng_devcrypto-add-configuration-options.patch

@@ -1,4 +1,4 @@
-From 1c2fabcdb34e436286b4a8760cfbfbff11ea551a Mon Sep 17 00:00:00 2001
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
 From: Eneas U de Queiroz <cote2004-github@yahoo.com>
 Date: Sat, 3 Nov 2018 15:41:10 -0300
 Subject: eng_devcrypto: add configuration options
@@ -14,7 +14,6 @@ Reviewed-by: Richard Levitte <levitte@openssl.org>
 (Merged from https://github.com/openssl/openssl/pull/7585)
 
 diff --git a/crypto/engine/eng_devcrypto.c b/crypto/engine/eng_devcrypto.c
-index a2c9a966f7..5ec38ca8f3 100644
 --- a/crypto/engine/eng_devcrypto.c
 +++ b/crypto/engine/eng_devcrypto.c
 @@ -16,6 +16,7 @@
@@ -558,7 +557,7 @@ index a2c9a966f7..5ec38ca8f3 100644
  /******************************************************************************
   *
   * LOAD / UNLOAD
-@@ -793,6 +1109,8 @@ void engine_load_devcrypto_int()
+@@ -806,6 +1122,8 @@ void engine_load_devcrypto_int()
  
      if (!ENGINE_set_id(e, "devcrypto")
          || !ENGINE_set_name(e, "/dev/crypto engine")

package/libs/wolfssl/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wolfssl
 PKG_VERSION:=4.7.0-stable
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://github.com/wolfSSL/wolfssl/archive/v$(PKG_VERSION)

package/libs/wolfssl/patches/200-ecc-rng.patch

@@ -0,0 +1,50 @@
+Since commit 6467de5a8840 ("Randomize z ordinates in scalar
+mult when timing resistant") wolfssl requires a RNG for an EC
+key when the hardened built option is selected.
+
+wc_ecc_set_rng is only available when built hardened, so there
+is no safe way to install the RNG to the key regardless whether
+or not wolfssl is compiled hardened.
+
+Always export wc_ecc_set_rng so tools such as hostapd can install
+RNG regardless of the built settings for wolfssl.
+
+--- a/wolfcrypt/src/ecc.c
++++ b/wolfcrypt/src/ecc.c
+@@ -10293,21 +10293,21 @@ void wc_ecc_fp_free(void)
+ 
+ #endif /* FP_ECC */
+ 
+-#ifdef ECC_TIMING_RESISTANT
+ int wc_ecc_set_rng(ecc_key* key, WC_RNG* rng)
+ {
+     int err = 0;
+ 
++#ifdef ECC_TIMING_RESISTANT
+     if (key == NULL) {
+         err = BAD_FUNC_ARG;
+     }
+     else {
+         key->rng = rng;
+     }
++#endif
+ 
+     return err;
+ }
+-#endif
+ 
+ #ifdef HAVE_ECC_ENCRYPT
+ 
+--- a/wolfssl/wolfcrypt/ecc.h
++++ b/wolfssl/wolfcrypt/ecc.h
+@@ -584,10 +584,8 @@ WOLFSSL_API
+ void wc_ecc_fp_free(void);
+ WOLFSSL_LOCAL
+ void wc_ecc_fp_init(void);
+-#ifdef ECC_TIMING_RESISTANT
+ WOLFSSL_API
+ int wc_ecc_set_rng(ecc_key* key, WC_RNG* rng);
+-#endif
+ 
+ WOLFSSL_API
+ int wc_ecc_set_curve(ecc_key* key, int keysize, int curve_id);

package/network/config/netifd/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/netifd.git
-PKG_SOURCE_DATE:=2021-05-26
-PKG_SOURCE_VERSION:=899c2a4520526d43113f73cf673f20e2486a40fb
-PKG_MIRROR_HASH:=354905192b30af88ea953241ed332555e67cdb7e3b54dd139250bf1e6ad3a709
+PKG_SOURCE_DATE:=2021-07-26
+PKG_SOURCE_VERSION:=440eb0647708274cc8d7d9e7c2bb0cfdfba90023
+PKG_MIRROR_HASH:=eed957036ab608fdc49bdf801fc5b4405fcd2a3a5e5d3343ec39898e156c10e9
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 PKG_LICENSE:=GPL-2.0

package/network/config/qos-scripts/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=qos-scripts
 PKG_VERSION:=1.3.1
-PKG_RELEASE:=2
+PKG_RELEASE:=$(AUTORELEASE)
 PKG_LICENSE:=GPL-2.0
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>

package/network/config/qos-scripts/files/usr/lib/qos/generate.sh

@@ -326,7 +326,8 @@ start_interface() {
 			append cstr "$classnr:$prio:$avgrate:$pktsize:$pktdelay:$maxrate:$qdisc:$filter" "$N"
 		done
 		append ${prefix}q "$(tcrules)" "$N"
-		export dev_${dir}="ip link set $dev up >&- 2>&-
+		export dev_${dir}="ip link add ${dev} type ifb >&- 2>&-
+ip link set $dev up >&- 2>&-
 tc qdisc del dev $dev root >&- 2>&-
 tc qdisc add dev $dev root handle 1: hfsc default ${class_default}0
 tc class add dev $dev parent 1: classid 1:1 hfsc sc rate ${rate}kbit ul rate ${rate}kbit"

package/network/services/dnsmasq/files/dnsmasq.init

@@ -19,6 +19,7 @@ BASEDHCPSTAMPFILE="/var/run/dnsmasq"
 DHCPBOGUSHOSTNAMEFILE="/usr/share/dnsmasq/dhcpbogushostname.conf"
 RFC6761FILE="/usr/share/dnsmasq/rfc6761.conf"
 DHCPSCRIPT="/usr/lib/dnsmasq/dhcp-script.sh"
+DHCPSCRIPT_DEPENDS="/usr/share/libubox/jshn.sh /usr/bin/jshn /bin/ubus"
 
 DNSMASQ_DHCP_VER=4
 
@@ -161,7 +162,7 @@ append_server() {
 }
 
 append_rev_server() {
-        xappend "--rev-server=$1"
+	xappend "--rev-server=$1"
 }
 
 append_address() {
@@ -186,7 +187,22 @@ append_notinterface() {
 	xappend "--except-interface=$ifname"
 }
 
+ismounted() {
+	local filename="$1"
+	local dirname
+	for dirname in $EXTRA_MOUNT ; do
+		case "$filename" in
+			"${dirname}/"* | "${dirname}" )
+				return 1
+				;;
+		esac
+	done
+
+	return 0
+}
+
 append_addnhosts() {
+	ismounted "$1" || append EXTRA_MOUNT "$1"
 	xappend "--addn-hosts=$1"
 }
 
@@ -801,9 +817,10 @@ dnsmasq_start()
 	config_get_bool disabled "$cfg" disabled 0
 	[ "$disabled" -gt 0 ] && return 0
 
-	# reset list of DOMAINS and DNS servers (for each dnsmasq instance)
+	# reset list of DOMAINS, DNS servers and EXTRA mounts (for each dnsmasq instance)
 	DNS_SERVERS=""
 	DOMAIN=""
+	EXTRA_MOUNT=""
 	CONFIGFILE="${BASECONFIGFILE}.${cfg}"
 	CONFIGFILE_TMP="${CONFIGFILE}.$$"
 	HOSTFILE="${BASEHOSTFILE}.${cfg}"
@@ -878,8 +895,16 @@ dnsmasq_start()
 	append_bool "$cfg" noresolv "--no-resolv"
 	append_bool "$cfg" localise_queries "--localise-queries"
 	append_bool "$cfg" readethers "--read-ethers"
-	append_bool "$cfg" dbus "--enable-dbus"
-	append_bool "$cfg" ubus "--enable-ubus"	1
+
+	local instance_name="dnsmasq.$cfg"
+	if [ "$cfg" = "$DEFAULT_INSTANCE" ]; then
+		instance_name="dnsmasq"
+	fi
+	config_get_bool dbus "$cfg" "dbus" 0
+	[ $dbus -gt 0 ] && xappend "--enable-dbus=uk.org.thekelleys.$instance_name"
+	config_get_bool ubus "$cfg" "ubus" 1
+	[ $ubus -gt 0 ] && xappend "--enable-ubus=$instance_name"
+
 	append_bool "$cfg" expandhosts "--expand-hosts"
 	config_get tftp_root "$cfg" "tftp_root"
 	[ -n "$tftp_root" ] && mkdir -p "$tftp_root" && append_bool "$cfg" enable_tftp "--enable-tftp"
@@ -907,7 +932,7 @@ dnsmasq_start()
 	append_parm "$cfg" "minport" "--min-port"
 	append_parm "$cfg" "maxport" "--max-port"
 	append_parm "$cfg" "domain" "--domain"
-	append_parm "$cfg" "local" "--server"
+	append_parm "$cfg" "local" "--local"
 	config_list_foreach "$cfg" "listen_address" append_listenaddress
 	config_list_foreach "$cfg" "server" append_server
 	config_list_foreach "$cfg" "rev_server" append_rev_server
@@ -917,6 +942,14 @@ dnsmasq_start()
 		config_list_foreach "$cfg" "interface" append_interface
 		config_list_foreach "$cfg" "notinterface" append_notinterface
 	}
+	config_get_bool ignore_hosts_dir "$cfg" ignore_hosts_dir 0
+	if [ "$ignore_hosts_dir" = "1" ]; then
+		xappend "--addn-hosts=$HOSTFILE"
+		append EXTRA_MOUNT "$HOSTFILE"
+	else
+		xappend "--addn-hosts=$(dirname $HOSTFILE)"
+		append EXTRA_MOUNT "$(dirname $HOSTFILE)"
+	fi
 	config_list_foreach "$cfg" "addnhosts" append_addnhosts
 	config_list_foreach "$cfg" "bogusnxdomain" append_bogusnxdomain
 	append_parm "$cfg" "leasefile" "--dhcp-leasefile" "/tmp/dhcp.leases"
@@ -1012,7 +1045,6 @@ dnsmasq_start()
 
 	xappend "--dhcp-broadcast=tag:needs-broadcast"
 
-	xappend "--addn-hosts=$(dirname $HOSTFILE)"
 
 	config_get dnsmasqconfdir "$cfg" confdir "/tmp/dnsmasq.d"
 	xappend "--conf-dir=$dnsmasqconfdir"
@@ -1106,7 +1138,10 @@ dnsmasq_start()
 	procd_set_param respawn
 
 	procd_add_jail dnsmasq ubus log
-	procd_add_jail_mount $CONFIGFILE $TRUSTANCHORSFILE $HOSTFILE $RFC6761FILE $DHCPBOGUSHOSTNAMEFILE /etc/passwd /etc/group /etc/TZ /dev/null /dev/urandom $dnsmasqconffile $dnsmasqconfdir $resolvdir $user_dhcpscript /etc/hosts /etc/ethers /sbin/hotplug-call $EXTRA_MOUNT $DHCPSCRIPT
+	procd_add_jail_mount $CONFIGFILE $DHCPBOGUSHOSTNAMEFILE $DHCPSCRIPT $DHCPSCRIPT_DEPENDS
+	procd_add_jail_mount $EXTRA_MOUNT $RFC6761FILE $TRUSTANCHORSFILE
+	procd_add_jail_mount $dnsmasqconffile $dnsmasqconfdir $resolvdir $user_dhcpscript
+	procd_add_jail_mount /etc/passwd /etc/group /etc/TZ /etc/hosts /etc/ethers
 	procd_add_jail_mount_rw /var/run/dnsmasq/ $leasefile
 
 	procd_close_instance
@@ -1155,6 +1190,7 @@ boot()
 start_service() {
 	local instance="$1"
 	local instance_found=0
+	local first_instance=""
 
 	. /lib/functions/network.sh
 
@@ -1165,10 +1201,27 @@ start_service() {
 			if [ -n "$instance" ] && [ "$instance" = "$name" ]; then
 				instance_found=1
 			fi
+			if [ -z "$DEFAULT_INSTANCE" ]; then
+				local disabled
+				config_get_bool disabled "$name" disabled 0
+				if [ "$disabled" -eq 0 ]; then
+					# First enabled section will be assigned default instance name.
+					# Unnamed sections get precedence over named sections.
+					if expr "$cfg" : 'cfg[0-9a-f]*$' >/dev/null = "9"; then # See uci_fixup_section.
+						DEFAULT_INSTANCE="$name" # Unnamed config section.
+					elif [ -z "$first_instance" ]; then
+						first_instance="$name"
+					fi
+				fi
+			fi
 		fi
 	}
 
+	DEFAULT_INSTANCE=""
 	config_load dhcp
+	if [ -z "$DEFAULT_INSTANCE" ]; then
+		DEFAULT_INSTANCE="$first_instance" # No unnamed config section was found.
+	fi
 
 	if [ -n "$instance" ]; then
 		[ "$instance_found" -gt 0 ] || return

package/network/services/hostapd/Makefile

@@ -7,7 +7,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=hostapd
-PKG_RELEASE:=32
+PKG_RELEASE:=35
 
 PKG_SOURCE_URL:=http://w1.fi/hostap.git
 PKG_SOURCE_PROTO:=git

package/network/services/hostapd/files/hostapd.sh

@@ -92,7 +92,7 @@ hostapd_common_add_device_config() {
 	config_add_array basic_rate
 	config_add_array supported_rates
 
-	config_add_string country
+	config_add_string country country3
 	config_add_boolean country_ie doth
 	config_add_boolean spectrum_mgmt_required
 	config_add_int local_pwr_constraint
@@ -114,7 +114,7 @@ hostapd_prepare_device_config() {
 
 	local base_cfg=
 
-	json_get_vars country country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
+	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density
 
 	hostapd_set_log_options base_cfg
@@ -128,6 +128,7 @@ hostapd_prepare_device_config() {
 
 	[ -n "$country" ] && {
 		append base_cfg "country_code=$country" "$N"
+		[ -n "$country3" ] && append base_cfg "country3=$country3" "$N"
 
 		[ "$country_ie" -gt 0 ] && {
 			append base_cfg "ieee80211d=1" "$N"
@@ -251,6 +252,8 @@ hostapd_common_add_bss_config() {
 	config_add_int acct_port
 	config_add_int acct_interval
 
+	config_add_int bss_load_update_period chan_util_avg_period
+
 	config_add_string dae_client
 	config_add_string dae_secret
 	config_add_int dae_port
@@ -281,7 +284,7 @@ hostapd_common_add_bss_config() {
 	config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
 	config_add_string multi_ap_backhaul_ssid multi_ap_backhaul_key
 
-	config_add_boolean wnm_sleep_mode bss_transition
+	config_add_boolean wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition
 	config_add_int time_advertisement
 	config_add_string time_zone
 
@@ -703,13 +706,17 @@ hostapd_set_bss_options() {
 		append bss_conf "iapp_interface=$ifname" "$N"
 	}
 
-	json_get_vars time_advertisement time_zone wnm_sleep_mode bss_transition
+	json_get_vars time_advertisement time_zone wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition
 	set_default bss_transition 0
 	set_default wnm_sleep_mode 0
+	set_default wnm_sleep_mode_no_keys 0
 
 	[ -n "$time_advertisement" ] && append bss_conf "time_advertisement=$time_advertisement" "$N"
 	[ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N"
-	[ "$wnm_sleep_mode" -eq "1" ] && append bss_conf "wnm_sleep_mode=1" "$N"
+	if [ "$wnm_sleep_mode" -eq "1" ]; then
+		append bss_conf "wnm_sleep_mode=1" "$N"
+		[ "$wnm_sleep_mode_no_keys" -eq "1" ] && append bss_conf "wnm_sleep_mode_no_keys=1" "$N"
+	fi
 	[ "$bss_transition" -eq "1" ] && append bss_conf "bss_transition=1" "$N"
 
 	json_get_vars ieee80211k rrm_neighbor_report rrm_beacon_report

package/network/services/hostapd/patches/802-wolfssl-init-RNG-with-ECC-key.patch

@@ -0,0 +1,48 @@
+From 21ce83b4ae2b9563175fdb4fc4312096cc399cf8 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Wed, 5 May 2021 00:44:34 +0200
+Subject: [PATCH] wolfssl: add RNG to EC key
+
+Since upstream commit 6467de5a8840 ("Randomize z ordinates in
+scalar mult when timing resistant") WolfSSL requires a RNG for
+the EC key when built hardened which is the default.
+
+Set the RNG for the EC key to fix connections for OWE clients.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ src/crypto/crypto_wolfssl.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/src/crypto/crypto_wolfssl.c b/src/crypto/crypto_wolfssl.c
+index 2e4bf8962..ed2528159 100644
+--- a/src/crypto/crypto_wolfssl.c
++++ b/src/crypto/crypto_wolfssl.c
+@@ -1303,6 +1303,7 @@ int ecc_projective_add_point(ecc_point *P, ecc_point *Q, ecc_point *R,
+ 
+ struct crypto_ec {
+ 	ecc_key key;
++	WC_RNG rng;
+ 	mp_int a;
+ 	mp_int prime;
+ 	mp_int order;
+@@ -1357,6 +1358,8 @@ struct crypto_ec * crypto_ec_init(int group)
+ 		return NULL;
+ 
+ 	if (wc_ecc_init(&e->key) != 0 ||
++	    wc_InitRng(&e->rng) != 0 ||
++	    wc_ecc_set_rng(&e->key, &e->rng) != 0 ||
+ 	    wc_ecc_set_curve(&e->key, 0, curve_id) != 0 ||
+ 	    mp_init(&e->a) != MP_OKAY ||
+ 	    mp_init(&e->prime) != MP_OKAY ||
+@@ -1388,6 +1391,7 @@ void crypto_ec_deinit(struct crypto_ec* e)
+ 	mp_clear(&e->order);
+ 	mp_clear(&e->prime);
+ 	mp_clear(&e->a);
++	wc_FreeRng(&e->rng);
+ 	wc_ecc_free(&e->key);
+ 	os_free(e);
+ }
+-- 
+2.31.1
+

package/network/services/odhcpd/Makefile

@@ -12,9 +12,9 @@ PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/odhcpd.git
-PKG_SOURCE_DATE:=2021-01-06
-PKG_SOURCE_VERSION:=8d8a8cd35137ff0fa11b6be455fdd596a8d7d2e9
-PKG_MIRROR_HASH:=7149b4a434a35c1e64b20c708c0abbd381e034a2a1b4fbc1b7da0b039568b5b5
+PKG_SOURCE_DATE:=2021-07-18
+PKG_SOURCE_VERSION:=bc9d317f2921ae6b529f2c9f8de79b75992e206f
+PKG_MIRROR_HASH:=be96c4984821b8af95bfee1a29c082bb9eaa052cd3e03d8632ff02afd2debc81
 
 PKG_MAINTAINER:=Hans Dedecker <dedeckeh@gmail.com>
 PKG_LICENSE:=GPL-2.0

package/network/utils/comgt/files/3g.usb

@@ -23,6 +23,8 @@ find_3g_iface() {
 	fi
 }
 
+[ "$ACTION" = add ] || [ "$ACTION" = remove ] || exit 0
+
 case "$DEVICENAME" in
 	tty*)
 		[ -e "/dev/$DEVICENAME" ] || [ "$ACTION" = remove ] || exit 0

package/network/utils/iw/Makefile

@@ -8,12 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=iw
-PKG_VERSION:=5.9
-PKG_RELEASE:=1
+PKG_VERSION:=5.9-8fab0c9e
+PKG_RELEASE:=$(AUTORELEASE)
 
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_SOURCE_URL:=@KERNEL/software/network/iw
-PKG_HASH:=293a07109aeb7e36267cf59e3ce52857e9ffae3a6666eb8ac77894b1839fe1f2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://git.kernel.org/pub/scm/linux/kernel/git/jberg/iw.git
+PKG_SOURCE_VERSION:=8fab0c9ee9db217587a58efcc37421c86edcb638
+PKG_MIRROR_HASH:=797b322bc03952f3127ae0a7da476c14ada1bbe9a9ae234a56dd6f864c568e16
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_LICENSE:=GPL-2.0

package/network/utils/iw/patches/001-nl80211_h_sync.patch

@@ -1,9 +1,99 @@
 --- a/nl80211.h
 +++ b/nl80211.h
-@@ -2527,6 +2527,13 @@ enum nl80211_commands {
+@@ -655,6 +655,9 @@
+  *	When a security association was established on an 802.1X network using
+  *	fast transition, this event should be followed by an
+  *	%NL80211_CMD_PORT_AUTHORIZED event.
++ *	Following a %NL80211_CMD_ROAM event userspace can issue
++ *	%NL80211_CMD_GET_SCAN in order to obtain the scan information for the
++ *	new BSS the card/driver roamed to.
+  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+  *	userspace that a connection was dropped by the AP or due to other
+  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+@@ -757,7 +760,8 @@
+  *	of any other interfaces, and other interfaces will again take
+  *	precedence when they are used.
+  *
+- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
++ *	(no longer supported).
+  *
+  * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+  *	multicast to unicast conversion. When enabled, all multicast packets
+@@ -1177,6 +1181,10 @@
+  *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+  *	if the recipient acknowledged the frame.
+  *
++ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
++ *	passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
++ *	specify the wiphy index to be applied to.
++ *
+  * @NL80211_CMD_MAX: highest used command number
+  * @__NL80211_CMD_AFTER_LAST: internal use
+  */
+@@ -1407,6 +1415,8 @@ enum nl80211_commands {
+ 
+ 	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+ 
++	NL80211_CMD_SET_SAR_SPECS,
++
+ 	/* add new commands above here */
+ 
+ 	/* used to define NL80211_CMD_MAX below */
+@@ -1750,8 +1760,9 @@ enum nl80211_commands {
+  *	specify just a single bitrate, which is to be used for the beacon.
+  *	The driver must also specify support for this with the extended
+  *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
+- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HT,
++ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT and
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HE.
+  *
+  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+@@ -1955,8 +1966,15 @@ enum nl80211_commands {
+  * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+  *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+  *	to be filled by the FW.
+- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
+- *      this feature.  Currently, only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
+  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+  *      ATTR_HT_CAPABILITY to which attention should be paid.
+  *      Currently, only mac80211 NICs support this feature.
+@@ -2077,7 +2095,8 @@ enum nl80211_commands {
+  *	until the channel switch event.
+  * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+  *	must be blocked on the current channel (before the channel switch
+- *	operation).
++ *	operation). Also included in the channel switch started event if quiet
++ *	was requested by the AP.
+  * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+  *	for the time while performing a channel switch.
+  * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
+@@ -2527,6 +2546,23 @@ enum nl80211_commands {
   *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
   *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
   *
++ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
++ *	derivation in WPA3-Personal networks which are using SAE authentication.
++ *	This is a u8 attribute that encapsulates one of the values from
++ *	&enum nl80211_sae_pwe_mechanism.
++ *
++ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
++ *	used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
++ *	of %nl80211_sar_attrs which specifies the sar type and related
++ *	sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
++ *
 + * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
 + *	disassoc events to indicate that an immediate reconnect to the AP
 + *	is desired.
@@ -14,14 +104,199 @@
   * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -3016,6 +3023,10 @@ enum nl80211_attrs {
+@@ -3016,6 +3052,16 @@ enum nl80211_attrs {
  	NL80211_ATTR_S1G_CAPABILITY,
  	NL80211_ATTR_S1G_CAPABILITY_MASK,
  
++	NL80211_ATTR_SAE_PWE,
++
 +	NL80211_ATTR_RECONNECT_REQUESTED,
 +
++	NL80211_ATTR_SAR_SPEC,
++
++	NL80211_ATTR_DISABLE_HE,
++
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 +
  	/* add attributes here, update the policy in nl80211.c */
  
  	__NL80211_ATTR_AFTER_LAST,
+@@ -5896,6 +5942,19 @@ enum nl80211_feature_flags {
+  * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+  *	unsolicited broadcast probe response transmission
+  *
++ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
++ *	configuration (AP/mesh) with HE rates.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
++ *      frame protection for all management frames exchanged during the
++ *      negotiation and range measurement procedure.
++ *
+  * @NUM_NL80211_EXT_FEATURES: number of extended features.
+  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+  */
+@@ -5956,6 +6015,10 @@ enum nl80211_ext_feature_index {
+ 	NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+ 	NL80211_EXT_FEATURE_FILS_DISCOVERY,
+ 	NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
++	NL80211_EXT_FEATURE_BEACON_RATE_HE,
++	NL80211_EXT_FEATURE_SECURE_LTF,
++	NL80211_EXT_FEATURE_SECURE_RTT,
++	NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ 
+ 	/* add new features before the definition below */
+ 	NUM_NL80211_EXT_FEATURES,
+@@ -6253,11 +6316,13 @@ struct nl80211_vendor_cmd_info {
+  * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+  * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+  * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
++ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
+  */
+ enum nl80211_tdls_peer_capability {
+ 	NL80211_TDLS_PEER_HT = 1<<0,
+ 	NL80211_TDLS_PEER_VHT = 1<<1,
+ 	NL80211_TDLS_PEER_WMM = 1<<2,
++	NL80211_TDLS_PEER_HE = 1<<3,
+ };
+ 
+ /**
+@@ -6849,6 +6914,9 @@ enum nl80211_peer_measurement_ftm_capa {
+  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+  *	ranging will be used.
++ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
++ *	valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
++ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+  *
+  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
+  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
+@@ -6867,6 +6935,7 @@ enum nl80211_peer_measurement_ftm_req {
+ 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+ 	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
+ 	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
++	NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
+ 
+ 	/* keep last */
+ 	NUM_NL80211_PMSR_FTM_REQ_ATTR,
+@@ -7124,4 +7193,115 @@ enum nl80211_unsol_bcast_probe_resp_attr
+ 	NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+ 		__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+ };
++
++/**
++ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
++ *	derivation. Applicable only when WPA3-Personal SAE authentication is
++ *	used.
++ *
++ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
++ *	attribute is not present from userspace.
++ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
++ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
++ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
++ *	can be used.
++ */
++enum nl80211_sae_pwe_mechanism {
++	NL80211_SAE_PWE_UNSPECIFIED,
++	NL80211_SAE_PWE_HUNT_AND_PECK,
++	NL80211_SAE_PWE_HASH_TO_ELEMENT,
++	NL80211_SAE_PWE_BOTH,
++};
++
++/**
++ * enum nl80211_sar_type - type of SAR specs
++ *
++ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
++ *
++ */
++enum nl80211_sar_type {
++	NL80211_SAR_TYPE_POWER,
++
++	/* add new type here */
++
++	/* Keep last */
++	NUM_NL80211_SAR_TYPE,
++};
++
++/**
++ * enum nl80211_sar_attrs - Attributes for SAR spec
++ *
++ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
++ *
++ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
++ *	limit specifications. Each specification contains a set
++ *	of %nl80211_sar_specs_attrs.
++ *
++ *	For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
++ *	and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
++ *
++ *	For sar_capa dump, it contains array of
++ *	%NL80211_SAR_ATTR_SPECS_START_FREQ
++ *	and %NL80211_SAR_ATTR_SPECS_END_FREQ.
++ *
++ * @__NL80211_SAR_ATTR_LAST: Internal
++ * @NL80211_SAR_ATTR_MAX: highest sar attribute
++ *
++ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
++ */
++enum nl80211_sar_attrs {
++	__NL80211_SAR_ATTR_INVALID,
++
++	NL80211_SAR_ATTR_TYPE,
++	NL80211_SAR_ATTR_SPECS,
++
++	__NL80211_SAR_ATTR_LAST,
++	NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
++};
++
++/**
++ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
++ *
++ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
++ *	power limit value in units of 0.25 dBm if type is
++ *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
++ *	0 means userspace doesn't have SAR limitation on this associated range.
++ *
++ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
++ *	index of exported freq range table and the associated power limitation
++ *	is applied to this range.
++ *
++ *	Userspace isn't required to set all the ranges advertised by WLAN driver,
++ *	and userspace can skip some certain ranges. These skipped ranges don't
++ *	have SAR limitations, and they are same as setting the
++ *	%NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
++ *	value higher than regulatory allowed value just means SAR power
++ *	limitation is removed, but it's required to set at least one range.
++ *	It's not allowed to set duplicated range in one SET operation.
++ *
++ *	Every SET operation overwrites previous SET operation.
++ *
++ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
++ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
++ */
++enum nl80211_sar_specs_attrs {
++	__NL80211_SAR_ATTR_SPECS_INVALID,
++
++	NL80211_SAR_ATTR_SPECS_POWER,
++	NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
++	NL80211_SAR_ATTR_SPECS_START_FREQ,
++	NL80211_SAR_ATTR_SPECS_END_FREQ,
++
++	__NL80211_SAR_ATTR_SPECS_LAST,
++	NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
++};
++
+ #endif /* __LINUX_NL80211_H */

package/network/utils/iw/patches/200-reduce_size.patch

@@ -1,6 +1,6 @@
 --- a/event.c
 +++ b/event.c
-@@ -944,6 +944,7 @@ static int print_event(struct nl_msg *ms
+@@ -956,6 +956,7 @@ static int print_event(struct nl_msg *ms
  	}
  
  	switch (gnlh->cmd) {
@@ -8,7 +8,7 @@
  	case NL80211_CMD_NEW_WIPHY:
  		printf("renamed to %s\n", nla_get_string(tb[NL80211_ATTR_WIPHY_NAME]));
  		break;
-@@ -979,6 +980,7 @@ static int print_event(struct nl_msg *ms
+@@ -991,6 +992,7 @@ static int print_event(struct nl_msg *ms
  	case NL80211_CMD_SCHED_SCAN_RESULTS:
  		printf("got scheduled scan results\n");
  		break;
@@ -16,7 +16,7 @@
  	case NL80211_CMD_WIPHY_REG_CHANGE:
  	case NL80211_CMD_REG_CHANGE:
  		if (gnlh->cmd == NL80211_CMD_WIPHY_REG_CHANGE)
-@@ -1061,6 +1063,7 @@ static int print_event(struct nl_msg *ms
+@@ -1073,6 +1075,7 @@ static int print_event(struct nl_msg *ms
  		mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC]));
  		printf("del station %s\n", macbuf);
  		break;
@@ -24,7 +24,7 @@
  	case NL80211_CMD_JOIN_IBSS:
  		mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC]));
  		printf("IBSS %s joined\n", macbuf);
-@@ -1254,9 +1257,9 @@ static int print_event(struct nl_msg *ms
+@@ -1271,9 +1274,9 @@ static int print_event(struct nl_msg *ms
  	case NL80211_CMD_CH_SWITCH_NOTIFY:
  		parse_ch_switch_notify(tb, gnlh->cmd);
  		break;
@@ -134,7 +134,7 @@
  {
 --- a/scan.c
 +++ b/scan.c
-@@ -1297,6 +1297,9 @@ static void print_ht_op(const uint8_t ty
+@@ -1306,6 +1306,9 @@ static void print_ht_op(const uint8_t ty
  	printf("\t\t * secondary channel offset: %s\n",
  		ht_secondary_offset[data[1] & 0x3]);
  	printf("\t\t * STA channel width: %s\n", sta_chan_width[(data[1] & 0x4)>>2]);
@@ -144,7 +144,7 @@
  	printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3);
  	printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]);
  	printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2);
-@@ -1707,6 +1710,14 @@ static void print_ie(const struct ie_pri
+@@ -1716,6 +1719,14 @@ static void print_ie(const struct ie_pri
  
  static const struct ie_print ieprinters[] = {
  	[0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
@@ -159,7 +159,7 @@
  	[1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
  	[3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), },
  	[5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), },
-@@ -1716,26 +1727,20 @@ static const struct ie_print ieprinters[
+@@ -1725,26 +1736,20 @@ static const struct ie_print ieprinters[
  	[32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), },
  	[35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), },
  	[42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), },
@@ -187,15 +187,15 @@
  };
  
  static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data,
-@@ -2279,6 +2284,7 @@ void print_ies(unsigned char *ie, int ie
+@@ -2326,6 +2331,7 @@ void print_ies(unsigned char *ie, int ie
  		    ieprinters[ie[0]].flags & BIT(ptype)) {
  			print_ie(&ieprinters[ie[0]],
  				 ie[0], ie[1], ie + 2, &ie_buffer);
 +#ifdef IW_FULL
  		} else if (ie[0] == 221 /* vendor */) {
  			print_vendor(ie[1], ie + 2, unknown, ptype);
- 		} else if (unknown) {
-@@ -2288,6 +2294,7 @@ void print_ies(unsigned char *ie, int ie
+ 		} else if (ie[0] == 255 /* extension */) {
+@@ -2337,6 +2343,7 @@ void print_ies(unsigned char *ie, int ie
  			for (i=0; i<ie[1]; i++)
  				printf(" %.2x", ie[2+i]);
  			printf("\n");
@@ -203,7 +203,7 @@
  		}
  		ielen -= ie[1] + 2;
  		ie += ie[1] + 2;
-@@ -2328,6 +2335,7 @@ static void print_capa_non_dmg(__u16 cap
+@@ -2377,6 +2384,7 @@ static void print_capa_non_dmg(__u16 cap
  		printf(" ESS");
  	if (capa & WLAN_CAPABILITY_IBSS)
  		printf(" IBSS");
@@ -211,7 +211,7 @@
  	if (capa & WLAN_CAPABILITY_CF_POLLABLE)
  		printf(" CfPollable");
  	if (capa & WLAN_CAPABILITY_CF_POLL_REQUEST)
-@@ -2356,6 +2364,7 @@ static void print_capa_non_dmg(__u16 cap
+@@ -2405,6 +2413,7 @@ static void print_capa_non_dmg(__u16 cap
  		printf(" DelayedBACK");
  	if (capa & WLAN_CAPABILITY_IMM_BACK)
  		printf(" ImmediateBACK");
@@ -219,7 +219,7 @@
  }
  
  static int print_bss_handler(struct nl_msg *msg, void *arg)
-@@ -2440,8 +2449,10 @@ static int print_bss_handler(struct nl_m
+@@ -2489,8 +2498,10 @@ static int print_bss_handler(struct nl_m
  	if (bss[NL80211_BSS_FREQUENCY]) {
  		int freq = nla_get_u32(bss[NL80211_BSS_FREQUENCY]);
  		printf("\tfreq: %d\n", freq);
@@ -230,7 +230,7 @@
  	}
  	if (bss[NL80211_BSS_BEACON_INTERVAL])
  		printf("\tbeacon interval: %d TUs\n",
-@@ -2635,6 +2646,7 @@ static int handle_stop_sched_scan(struct
+@@ -2684,6 +2695,7 @@ static int handle_stop_sched_scan(struct
  	return 0;
  }
  
@@ -238,7 +238,7 @@
  COMMAND(scan, sched_start,
  	SCHED_SCAN_OPTIONS,
  	NL80211_CMD_START_SCHED_SCAN, 0, CIB_NETDEV, handle_start_sched_scan,
-@@ -2645,3 +2657,4 @@ COMMAND(scan, sched_start,
+@@ -2694,3 +2706,4 @@ COMMAND(scan, sched_start,
  COMMAND(scan, sched_stop, "",
  	NL80211_CMD_STOP_SCHED_SCAN, 0, CIB_NETDEV, handle_stop_sched_scan,
  	"Stop an ongoing scheduled scan.");

package/network/utils/iwinfo/Makefile

@@ -7,25 +7,17 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libiwinfo
-PKG_RELEASE:=1
+PKG_RELEASE:=2.1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/iwinfo.git
-PKG_SOURCE_DATE:=2021-01-31
-PKG_SOURCE_VERSION:=4a32b33e9606f1bc1125f4bc24b0581349e55f2e
-PKG_MIRROR_HASH:=414e5d150efaadba21103e66f862be66a94dcf83c16a2850f7c05051a9b0739d
+PKG_SOURCE_DATE:=2021-04-30
+PKG_SOURCE_VERSION:=c45f0b584b4b86f8250f90ea19afca271c114fa2
+PKG_MIRROR_HASH:=24ad04791254a0523cd15a4fec6116d9ff121e006c93e5e41459f91347b33ec2
 PKG_MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
 PKG_LICENSE:=GPL-2.0
 
-PKG_FLAGS := nonshared
-
-PKG_CONFIG_DEPENDS := \
-	CONFIG_PACKAGE_kmod-brcm-wl \
-	CONFIG_PACKAGE_kmod-brcm-wl-mini \
-	CONFIG_PACKAGE_kmod-brcm-wl-mimo \
-	CONFIG_PACKAGE_kmod-cfg80211
-
-IWINFO_ABI_VERSION:=20210106
+IWINFO_ABI_VERSION:=20210430
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -34,13 +26,13 @@ define Package/libiwinfo
   SECTION:=libs
   CATEGORY:=Libraries
   TITLE:=Generalized Wireless Information Library (iwinfo)
-  DEPENDS:=+PACKAGE_kmod-cfg80211:libnl-tiny +libuci +libubus
+  DEPENDS:=+libnl-tiny +libuci +libubus +libiwinfo-data
   ABI_VERSION:=$(IWINFO_ABI_VERSION)
 endef
 
 define Package/libiwinfo/description
-  Wireless information library with consistent interface for proprietary Broadcom,
-  nl80211 and wext driver interfaces.
+  Wireless information library with simplified API for nl80211
+  and wext driver interfaces.
 endef
 
 
@@ -58,6 +50,12 @@ define Package/libiwinfo-lua/description
 endef
 
 
+define Package/libiwinfo-data
+  TITLE:=libiwinfo Lua binding
+  HIDDEN:=1
+endef
+
+
 define Package/iwinfo
   SECTION:=utils
   CATEGORY:=Utilities
@@ -73,12 +71,6 @@ endef
 define Build/Configure
 endef
 
-IWINFO_BACKENDS := \
-	$(if $(CONFIG_PACKAGE_kmod-brcm-wl),wl) \
-	$(if $(CONFIG_PACKAGE_kmod-brcm-wl-mini),wl) \
-	$(if $(CONFIG_PACKAGE_kmod-brcm-wl-mimo),wl) \
-	$(if $(CONFIG_PACKAGE_kmod-cfg80211),nl80211)
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl-tiny \
 	-I$(STAGING_DIR)/usr/include \
@@ -88,7 +80,7 @@ MAKE_FLAGS += \
 	FPIC="$(FPIC)" \
 	CFLAGS="$(TARGET_CFLAGS)" \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
-	BACKENDS="$(IWINFO_BACKENDS)" \
+	BACKENDS="nl80211" \
 	SOVERSION="$(IWINFO_ABI_VERSION)"
 
 define Build/InstallDev
@@ -104,8 +96,6 @@ endef
 define Package/libiwinfo/install
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libiwinfo.so.$(IWINFO_ABI_VERSION) $(1)/usr/lib/libiwinfo.so.$(IWINFO_ABI_VERSION)
-	$(INSTALL_DIR) $(1)/usr/share/libiwinfo
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/hardware.txt $(1)/usr/share/libiwinfo/hardware.txt
 endef
 
 define Package/libiwinfo-lua/install
@@ -113,6 +103,11 @@ define Package/libiwinfo-lua/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/iwinfo.so $(1)/usr/lib/lua/iwinfo.so
 endef
 
+define Package/libiwinfo-data/install
+	$(INSTALL_DIR) $(1)/usr/share/libiwinfo
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/hardware.txt $(1)/usr/share/libiwinfo/devices.txt
+endef
+
 define Package/iwinfo/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/iwinfo $(1)/usr/bin/iwinfo
@@ -120,4 +115,5 @@ endef
 
 $(eval $(call BuildPackage,libiwinfo))
 $(eval $(call BuildPackage,libiwinfo-lua))
+$(eval $(call BuildPackage,libiwinfo-data))
 $(eval $(call BuildPackage,iwinfo))

package/network/utils/iwinfo/patches/0001-iwinfo-rename-hardware.txt-to-devices.txt.patch

@@ -0,0 +1,26 @@
+From a0a0e02dd91d14a50155390d5fd3b95d6ec87bf4 Mon Sep 17 00:00:00 2001
+From: Jo-Philipp Wich <jo@mein.io>
+Date: Sun, 11 Jul 2021 15:56:35 +0200
+Subject: [PATCH] iwinfo: rename hardware.txt to devices.txt
+
+Signed-off-by: Jo-Philipp Wich <jo@mein.io>
+---
+ include/iwinfo.h            | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/iwinfo.h b/include/iwinfo.h
+index f7097cc..8469ee7 100644
+--- a/include/iwinfo.h
++++ b/include/iwinfo.h
+@@ -255,7 +255,7 @@ struct iwinfo_hardware_entry {
+ 
+ extern const struct iwinfo_iso3166_label IWINFO_ISO3166_NAMES[];
+ 
+-#define IWINFO_HARDWARE_FILE	"/usr/share/libiwinfo/hardware.txt"
++#define IWINFO_HARDWARE_FILE	"/usr/share/libiwinfo/devices.txt"
+ 
+ 
+ struct iwinfo_ops {
+-- 
+2.30.2
+

package/system/ubus/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/ubus.git
-PKG_SOURCE_DATE:=2021-06-03
-PKG_SOURCE_VERSION:=a8cf678230ed163ff7a07eb1e2c872f9d655460a
-PKG_MIRROR_HASH:=aee34cd1c1aa0f1a459dda0b2c6cbdb6b66e67147ebd1bcbb2a16a2ef923d008
+PKG_SOURCE_DATE:=2021-06-30
+PKG_SOURCE_VERSION:=4fc532c8a55ba8217ad67d7fd47c5eb9a8aba044
+PKG_MIRROR_HASH:=a5c8205f2e2b2f1f9ad687592e66a6e2bf8900dc54cfe3ceefe6c297d18971a8
 PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
 CMAKE_INSTALL:=1
 
@@ -15,7 +15,6 @@ PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
-PKG_FLAGS := nonshared
 PKG_ASLR_PIE_REGULAR:=1
 
 include $(INCLUDE_DIR)/package.mk

package/system/uci/Makefile

@@ -23,8 +23,6 @@ PKG_LICENSE_FILES:=
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 PKG_BUILD_PARALLEL:=0
-PKG_FLAGS := nonshared
-
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
 

package/utils/bcm27xx-userland/Makefile

@@ -8,16 +8,18 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bcm27xx-userland
-PKG_VERSION:=4a0a19b88b43e48c6b51b526b9378289fb712a4c
+PKG_VERSION:=97bc8180ad682b004ea224d1db7b8e108eda4397
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/raspberrypi/userland/tar.gz/$(PKG_VERSION)?
-PKG_HASH:=0f42d48095d1f680cbe8781c2e974b76bdd0507aaef64cce8b8b472ca3a09588
+PKG_HASH:=d67def03931215f41b741aed5a3a1bc2bd62fa33f5cc14692e9a4d65f2e0ea27
 
 PKG_FLAGS:=nonshared
 
 PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=LICENCE
 
 CMAKE_INSTALL:=1
 CMAKE_OPTIONS+=-DVMCS_INSTALL_PREFIX=/usr
@@ -46,6 +48,19 @@ define Package/bcm27xx-userland/description
   BCM27xx userland tools including vcgencmd and tvservice.
 endef
 
+define Package/bcm27xx-userland-dev
+  SECTION:=devel
+  CATEGORY:=Development
+  SUBMENU:=Libraries
+  DEPENDS:=@TARGET_bcm27xx +bcm27xx-userland
+  TITLE:=Development files of BCM27xx userland tools
+endef
+
+define Package/bcm27xx-userland-dev/description
+  This package contains the header and static libraries of
+  the BCM27xx userland tools.
+endef
+
 define Package/bcm27xx-userland/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtmerge $(1)/usr/bin
@@ -61,11 +76,22 @@ endif
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/vcgencmd $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/vcmailbox $(1)/usr/bin
 
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/*.so $(1)/usr/lib/
+ifneq ($(ARCH),aarch64)
+	$(INSTALL_DIR) $(1)/usr/lib/plugins
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/plugins/ $(1)/usr/lib/
+endif
+endef
+
+define Package/bcm27xx-userland-dev/install
 	$(INSTALL_DIR) $(1)/usr/include
 	$(CP) $(PKG_INSTALL_DIR)/usr/include/ $(1)/usr/
 
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ $(1)/usr/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig $(1)/usr/lib/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/*.a $(1)/usr/lib/
 endef
 
 $(eval $(call BuildPackage,bcm27xx-userland))
+$(eval $(call BuildPackage,bcm27xx-userland-dev))

package/utils/busybox/files/sysntpd

@@ -30,7 +30,12 @@ get_dhcp_ntp_servers() {
 
 validate_ntp_section() {
 	uci_load_validate system timeserver "$1" "$2" \
-		'server:list(host)' 'enabled:bool:1' 'enable_server:bool:0' 'use_dhcp:bool:1' 'dhcp_interface:list(string)'
+		'dhcp_interface:list(string)' \
+		'enable_server:bool:0' \
+		'enabled:bool:1' \
+		'interface:string' \
+		'server:list(host)' \
+		'use_dhcp:bool:1'
 }
 
 start_ntpd_instance() {
@@ -49,7 +54,17 @@ start_ntpd_instance() {
 
 	procd_open_instance
 	procd_set_param command "$PROG" -n -N
-	[ "$enable_server" = "1" ] && procd_append_param command -l
+	if [ "$enable_server" = "1" ]; then
+		procd_append_param command -l
+		[ -n "$interface" ] && {
+			local ifname
+
+			network_get_device ifname "$interface" || \
+				ifname="$interface"
+			procd_append_param command -I "$ifname"
+			procd_append_param netdev "$ifname"
+		}
+	fi
 	[ -x "$HOTPLUG_SCRIPT" ] && procd_append_param command -S "$HOTPLUG_SCRIPT"
 	for peer in $server; do
 		procd_append_param command -p $peer
@@ -71,11 +86,12 @@ start_ntpd_instance() {
 }
 
 start_service() {
+	. /lib/functions/network.sh
 	validate_ntp_section ntp start_ntpd_instance
 }
 
 service_triggers() {
-	local script name use_dhcp
+	local script name use_dhcp enable_server interface
 
 	script=$(readlink -f "$initscript")
 	name=$(basename ${script:-$initscript})
@@ -98,5 +114,17 @@ service_triggers() {
 		fi
 	}
 
+	config_get_bool enable_server ntp enable_server 0
+	config_get interface ntp interface
+
+	[ $enable_server -eq 1 ] && [ -n "$interface" ] && {
+		local ifname
+
+		network_get_device ifname "$interface" || \
+			ifname="$interface"
+		procd_add_interface_trigger "interface.*" "$ifname" \
+			/etc/init.d/"$name" reload
+	}
+
 	procd_add_validation validate_ntp_section
 }

package/utils/fritz-tools/src/fritz_tffs_nand_read.c

@@ -340,7 +340,7 @@ static int show_matching_key_value(struct tffs_key_name_table *key_names)
 	for (uint32_t i = 0; i < key_names->size; i++) {
 		name = key_names->entries[i].val;
 
-		if (strncmp(name, name_filter, strlen(name)) == 0) {
+		if (strcmp(name, name_filter) == 0) {
 			if (find_entry(key_names->entries[i].id, &tmp)) {
 				print_entry_value(&tmp);
 				printf("\n");

package/utils/fritz-tools/src/fritz_tffs_read.c

@@ -204,7 +204,7 @@ static int show_matching_key_value(uint8_t *buffer,
 	for (i = 0; i < key_names->size; i++) {
 		name = key_names->entries[i].val;
 
-		if (strncmp(name, name_filter, strlen(name)) == 0) {
+		if (strcmp(name, name_filter) == 0) {
 			id = to_entry_header_id(*key_names->entries[i].id);
 
 			if (find_entry(buffer, id, &tmp)) {

package/utils/lua/Makefile

@@ -16,7 +16,6 @@ PKG_SOURCE_URL:=http://www.lua.org/ftp/ \
 	http://www.tecgraf.puc-rio.br/lua/ftp/
 PKG_HASH:=2640fc56a795f29d28ef15e13c34a47e223960b0240e8cb0a82d9b0738695333
 PKG_BUILD_PARALLEL:=1
-PKG_FLAGS := nonshared
 
 PKG_LICENSE:=MIT
 PKG_LICENSE_FILES:=COPYRIGHT

package/utils/ugps/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ugps
-PKG_RELEASE:=1
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/ugps.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2020-08-29
-PKG_SOURCE_VERSION:=511a5b3c84fa715ef0305cf26c98619c12a4867a
-PKG_MIRROR_HASH:=551d57b4c18da4c4695fa2f7a959c25a03be35d14cf872785e7db740f12366e2
+PKG_SOURCE_DATE:=2021-06-08
+PKG_SOURCE_VERSION:=5e88403fc0d39ae8a270d2c6c6e9c8a4d5232cf3
+PKG_MIRROR_HASH:=a3dfc2cc6def3b634d8b7cda9139926be3d876cf2faa5251c4821987954442a5
 
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=GPL-2.0+

package/utils/ugps/files/ugps.init

@@ -16,11 +16,16 @@ start_service() {
 	local disabled="$(uci get gps.@gps[-1].disabled || echo 0)"
 
 	[ "$disabled" == "0" ] || return
+	[ "$tty" ] || return
 
-	[ -c "$tty" ] || {
-		tty="/dev/$tty"
-		[ -c "$tty" ] || return
-	}
+	case "$tty" in
+		"/"*)
+			true
+			;;
+		*)
+			tty="/dev/$tty"
+			;;
+	esac
 
 	procd_open_instance
 	procd_set_param command "$PROG"

scripts/json_overview_image_info.py

@@ -18,19 +18,33 @@ work_dir = Path(getenv("WORK_DIR"))
 
 output = {}
 
+
+def get_initial_output(image_info):
+    # preserve existing profiles.json
+    if output_path.is_file():
+        profiles = json.loads(output_path.read_text())
+        if profiles["version_code"] == image_info["version_code"]:
+            return profiles
+    return image_info
+
+
 for json_file in work_dir.glob("*.json"):
     image_info = json.loads(json_file.read_text())
+
     if not output:
-        output.update(image_info)
+        output = get_initial_output(image_info)
+
+    # get first and only profile in json file
+    device_id, profile = next(iter(image_info["profiles"].items()))
+    if device_id not in output["profiles"]:
+        output["profiles"][device_id] = profile
     else:
-        # get first (and only) profile in json file
-        device_id = next(iter(image_info["profiles"].keys()))
-        if device_id not in output["profiles"]:
-            output["profiles"].update(image_info["profiles"])
-        else:
-            output["profiles"][device_id]["images"].append(
-                image_info["profiles"][device_id]["images"][0]
-            )
+        output["profiles"][device_id]["images"].extend(profile["images"])
+
+# make image lists unique by name, keep last/latest
+for device_id, profile in output.get("profiles", {}).items():
+    profile["images"] = list({e["name"]: e for e in profile["images"]}.values())
+
 
 if output:
     default_packages, output["arch_packages"] = run(

target/linux/apm821xx/patches-5.4/802-usb-xhci-force-msi-renesas-xhci.patch

@@ -43,7 +43,7 @@ produce a noisy warning.
  		hcd->msi_enabled = 1;
 --- a/drivers/usb/host/xhci.h
 +++ b/drivers/usb/host/xhci.h
-@@ -1883,6 +1883,7 @@ struct xhci_hcd {
+@@ -1884,6 +1884,7 @@ struct xhci_hcd {
  	struct xhci_hub		usb2_rhub;
  	struct xhci_hub		usb3_rhub;
  	/* support xHCI 1.0 spec USB2 hardware LPM */

target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch

@@ -9,7 +9,7 @@
  struct fis_image_desc {
      unsigned char name[16];      // Null terminated name
      uint32_t	  flash_base;    // Address within FLASH of image
-@@ -67,6 +69,7 @@ static int parse_redboot_partitions(stru
+@@ -72,6 +74,7 @@ static int parse_redboot_partitions(stru
  				    const struct mtd_partition **pparts,
  				    struct mtd_part_parser_data *data)
  {
@@ -17,7 +17,7 @@
  	int nrparts = 0;
  	struct fis_image_desc *buf;
  	struct mtd_partition *parts;
-@@ -234,14 +237,15 @@ static int parse_redboot_partitions(stru
+@@ -239,14 +242,15 @@ static int parse_redboot_partitions(stru
  		}
  	}
  #endif
@@ -35,7 +35,7 @@
  #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
  	if (nulllen > 0) {
  		strcpy(nullname, nullstring);
-@@ -260,6 +264,8 @@ static int parse_redboot_partitions(stru
+@@ -265,6 +269,8 @@ static int parse_redboot_partitions(stru
  	}
  #endif
  	for ( ; i<nrparts; i++) {
@@ -44,7 +44,7 @@
  		parts[i].size = fl->img->size;
  		parts[i].offset = fl->img->flash_base;
  		parts[i].name = names;
-@@ -293,6 +299,13 @@ static int parse_redboot_partitions(stru
+@@ -298,6 +304,13 @@ static int parse_redboot_partitions(stru
  		fl = fl->next;
  		kfree(tmp_fl);
  	}

target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/parsers/redboot.c
 +++ b/drivers/mtd/parsers/redboot.c
-@@ -88,12 +88,18 @@ static int parse_redboot_partitions(stru
+@@ -93,12 +93,18 @@ static int parse_redboot_partitions(stru
  
  	parse_redboot_of(master);
  
@@ -19,7 +19,7 @@
  				return -EIO;
  			}
  			offset -= master->erasesize;
-@@ -106,10 +112,6 @@ static int parse_redboot_partitions(stru
+@@ -111,10 +117,6 @@ static int parse_redboot_partitions(stru
  				goto nogood;
  		}
  	}
@@ -30,7 +30,7 @@
  
  	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
  	       master->name, offset);
-@@ -182,6 +184,11 @@ static int parse_redboot_partitions(stru
+@@ -187,6 +189,11 @@ static int parse_redboot_partitions(stru
  	}
  	if (i == numslots) {
  		/* Didn't find it */

target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/parsers/redboot.c
 +++ b/drivers/mtd/parsers/redboot.c
-@@ -65,6 +65,22 @@ static void parse_redboot_of(struct mtd_
+@@ -70,6 +70,22 @@ static void parse_redboot_of(struct mtd_
  	directory = dirblock;
  }
  
@@ -23,7 +23,7 @@
  static int parse_redboot_partitions(struct mtd_info *master,
  				    const struct mtd_partition **pparts,
  				    struct mtd_part_parser_data *data)
-@@ -81,6 +97,7 @@ static int parse_redboot_partitions(stru
+@@ -86,6 +102,7 @@ static int parse_redboot_partitions(stru
  	int namelen = 0;
  	int nulllen = 0;
  	int numslots;
@@ -31,7 +31,7 @@
  	unsigned long offset;
  #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
  	static char nullstring[] = "unallocated";
-@@ -195,7 +212,10 @@ static int parse_redboot_partitions(stru
+@@ -200,7 +217,10 @@ static int parse_redboot_partitions(stru
  		goto out;
  	}
  
@@ -43,7 +43,7 @@
  		struct fis_list *new_fl, **prev;
  
  		if (buf[i].name[0] == 0xff) {
-@@ -271,12 +291,13 @@ static int parse_redboot_partitions(stru
+@@ -276,12 +296,13 @@ static int parse_redboot_partitions(stru
  	}
  #endif
  	for ( ; i<nrparts; i++) {
@@ -59,7 +59,7 @@
  		strcpy(names, fl->img->name);
  #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY
  		if (!memcmp(names, "RedBoot", 8) ||
-@@ -306,7 +327,9 @@ static int parse_redboot_partitions(stru
+@@ -311,7 +332,9 @@ static int parse_redboot_partitions(stru
  		fl = fl->next;
  		kfree(tmp_fl);
  	}

target/linux/ath79/config-5.4

@@ -90,6 +90,7 @@ CONFIG_GPIOLIB_IRQCHIP=y
 CONFIG_GPIO_74X164=y
 CONFIG_GPIO_ATH79=y
 CONFIG_GPIO_GENERIC=y
+# CONFIG_GPIO_LATCH is not set
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDWARE_WATCHPOINTS=y
 CONFIG_HAS_DMA=y
@@ -172,6 +173,7 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_NAND_RB91X is not set
 CONFIG_MTD_PARSER_CYBERTAN=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPI_NOR=y

target/linux/ath79/dts/ar9331_onion_omega.dts

@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9331.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Onion Omega";
+	compatible = "onion,omega", "qca,ar9331";
+
+	aliases {
+		serial0 = &uart;
+		label-mac-device = &wmac;
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_system: system {
+			label = "amber:system";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <60>;
+		};
+	};
+
+	reg_usb_vbus: reg_usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&usb {
+	status = "okay";
+
+	vbus-supply = <&reg_usb_vbus>;
+	dr_mode = "host";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+
+	compatible = "syscon", "simple-mfd";
+};
+
+&eth1 {
+	status = "okay";
+
+	mtd-mac-address = <&uboot 0x1fc00>;
+	mtd-mac-address-increment = <(-1)>;
+
+	gmac-config {
+		device = <&gmac>;
+		switch-phy-addr-swap = <4>;
+		switch-phy-swap = <4>;
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot: partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				compatible = "tplink,firmware";
+				label = "firmware";
+				reg = <0x020000 0xfd0000>;
+			};
+
+			art: partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+
+	mtd-cal-data = <&art 0x1000>;
+
+	mtd-mac-address = <&uboot 0x1fc00>;
+};

target/linux/ath79/dts/ar9342_mikrotik_routerboard-912uag-2hpnd.dts

@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "mikrotik,routerboard-912uag-2hpnd", "qca,ar9342";
+	model = "MikroTik RouterBOARD 912UAG-2HPnD";
+
+	aliases {
+                led-boot = &led_power;
+                led-failsafe = &led_power;
+                led-running = &led_power;
+                led-upgrade = &led_power;
+        };
+
+	gpio_latch: gpio_latch {
+		compatible = "gpio-latch";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpios = <&gpio 0 GPIO_ACTIVE_HIGH>,
+			<&gpio 1 GPIO_ACTIVE_HIGH>,
+			<&gpio 2 GPIO_ACTIVE_HIGH>,
+			<&gpio 3 GPIO_ACTIVE_HIGH>,
+			<0>, /* Not connected */
+			<&gpio 13 GPIO_ACTIVE_HIGH>,
+			<&gpio 14 GPIO_ACTIVE_HIGH>,
+			<&gpio 15 GPIO_ACTIVE_HIGH>,
+			<&gpio 11 GPIO_ACTIVE_LOW>; /* Latch Enable */
+	};
+
+	nand_gpio {
+		compatible = "mikrotik,rb91x-nand";
+
+		gpios = <&gpio_latch 3 GPIO_ACTIVE_HIGH>, /* Read */
+			<&gpio 4 GPIO_ACTIVE_HIGH>,       /* Ready (RDY) */
+			<&gpio_latch 5 GPIO_ACTIVE_LOW>,  /* Chip Enable (nCE) */
+			<&gpio_latch 6 GPIO_ACTIVE_HIGH>, /* Command Latch Enable (CLE) */
+			<&gpio_latch 7 GPIO_ACTIVE_HIGH>, /* Address Latch Enable (ALE) */
+			<&gpio 12 GPIO_ACTIVE_LOW>,       /* Read/Write Enable (nRW) */
+			<&gpio_latch 8 GPIO_ACTIVE_LOW>;  /* Latch Enable (nLE) */
+
+		partitions {
+			compatible = "fixed-partitions";
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "booter";
+				reg = <0x0 0x0040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "kernel";
+				reg = <0x0040000 0x03c0000>;
+			};
+
+			partition@400000 {
+				label = "ubi";
+				reg = <0x0400000 0x7c00000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "green:power";
+			gpios = <&gpio_latch 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user {
+			label = "green:user";
+			gpios = <&gpio_latch 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "green:led1";
+			gpios = <&ssr 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			label = "green:led2";
+			gpios = <&ssr 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			label = "green:led3";
+			gpios = <&ssr 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4 {
+			label = "green:led4";
+			gpios = <&ssr 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5 {
+			label = "green:led5";
+			gpios = <&ssr 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		beeper {
+			gpio-export,name = "beeper";
+			gpio-export,output = <1>;	/* Must be 1 to avoid EMI induced clicking noise */
+			gpios = <&ssr 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power {
+			gpio-export,name = "power-usb";
+			gpio-export,output = <1>;
+			gpios = <&ssr 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		pcie_power {
+			gpio-export,name = "power-pcie";
+			gpio-export,output = <0>;
+			gpios = <&ssr 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&spi {
+	status = "okay";
+
+	compatible = "qca,ar7100-spi";
+
+	cs-gpios = <0>, <&gpio_latch 0 GPIO_ACTIVE_LOW>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "mikrotik,routerboot-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "routerboot";
+				reg = <0x0 0x0>;
+				read-only;
+			};
+
+			hard_config: hard_config {
+				read-only;
+			};
+
+			bios {
+				size = <0x1000>;
+				read-only;
+			};
+
+			soft_config {
+			};
+		};
+	};
+
+	ssr: ssr@1 {
+		compatible = "fairchild,74hc595";
+		gpio-controller;
+		#gpio-cells = <2>;
+		registers-number = <1>;
+		reg = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy-mask = <0>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	pll-data = <0x02000000 0x00000101 0x00001313>;
+
+	gmac-config {
+		device = <&gmac>;
+		rgmii-gmac0 = <1>;
+		rgmii-enabled = <1>;
+		rxd-delay = <1>;
+		txd-delay = <1>;
+	};
+};
+
+&wmac {
+	status = "okay";
+	qca,no-eeprom;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};

target/linux/ath79/dts/ar9344_tplink_cpe.dtsi

@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
 	aliases {
@@ -59,20 +60,9 @@
 			partition@40000 {
 				label = "firmware";
 				reg = <0x040000 0x780000>;
-
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "kernel";
-					reg = <0x000000 0x300000>;
-				};
-
-				partition@300000 {
-					label = "rootfs";
-					reg = <0x300000 0x480000>;
-				};
+				compatible = "openwrt,uimage", "denx,uimage";
+				openwrt,ih-magic = <IH_MAGIC_OKLI>;
+				openwrt,offset = <0x3000>;
 			};
 
 			partition@7c0000 {

target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts

@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "joyit,jt-or750i", "qca,qca9531";
+	model = "Joy-IT JT-OR750i";
+
+	aliases {
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_red;
+		label-mac-device = &eth0;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&jtag_disable_pins &pinmux_led_eth_pins>;
+
+		led_status_green: status_green {
+			label = "green:status";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led_status_red: status_red {
+			label = "red:status";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinmux {
+	pinmux_led_eth_pins: pinmux_led_eth_pins {
+		pinctrl-single,bits = \
+			/* GPIO 4: LED_LINK_5 (WAN) */     \
+			<0x04 0x0000002d 0x000000ff>,      \
+			/* GPIO 14: LED_LINK_2 (LAN 3) */  \
+			/* GPIO 15: LED_LINK_3 (LAN 2) */  \
+			<0x0c 0x2b2a0000 0xffff0000>,      \
+			/* GPIO 16: LED_LINK_4 (LAN 1) */  \
+			<0x10 0x0000002c 0x000000ff>;
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "firmware";
+				reg = <0x50000 0xfa0000>;
+				compatible = "denx,uimage";
+			};
+
+			art: partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy4>;
+
+	mtd-mac-address = <&art 0x0>;
+};
+
+&eth1 {
+	mtd-mac-address = <&art 0x6>;
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+
+	mtd-cal-data = <&art 0x1000>;
+};

target/linux/ath79/files/drivers/gpio/gpio-latch.c

@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  GPIO latch driver
+ *
+ *  Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+
+#define GPIO_LATCH_DRIVER_NAME  "gpio-latch"
+#define GPIO_LATCH_LINES 9
+
+struct gpio_latch_chip {
+	struct gpio_chip gc;
+	struct mutex mutex;
+	struct mutex latch_mutex;
+	bool latch_enabled;
+	int le_gpio;
+	bool le_active_low;
+	struct gpio_desc *gpios[GPIO_LATCH_LINES];
+};
+
+static inline struct gpio_latch_chip *to_gpio_latch_chip(struct gpio_chip *gc)
+{
+	return container_of(gc, struct gpio_latch_chip, gc);
+}
+
+static void gpio_latch_lock(struct gpio_latch_chip *glc, bool enable)
+{
+	mutex_lock(&glc->mutex);
+
+	if (enable)
+		glc->latch_enabled = true;
+
+	if (glc->latch_enabled)
+		mutex_lock(&glc->latch_mutex);
+}
+
+static void gpio_latch_unlock(struct gpio_latch_chip *glc, bool disable)
+{
+	if (glc->latch_enabled)
+		mutex_unlock(&glc->latch_mutex);
+
+	if (disable)
+		glc->latch_enabled = true;
+
+	mutex_unlock(&glc->mutex);
+}
+
+static int
+gpio_latch_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+	int ret;
+
+	gpio_latch_lock(glc, false);
+	ret = gpiod_get_value(glc->gpios[offset]);
+	gpio_latch_unlock(glc, false);
+
+	return ret;
+}
+
+static void
+gpio_latch_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+	bool enable_latch = false;
+	bool disable_latch = false;
+
+	if (offset == glc->le_gpio) {
+		enable_latch = value ^ glc->le_active_low;
+		disable_latch = !enable_latch;
+	}
+
+	gpio_latch_lock(glc, enable_latch);
+	gpiod_set_raw_value(glc->gpios[offset], value);
+	gpio_latch_unlock(glc, disable_latch);
+}
+
+static int
+gpio_latch_direction_output(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
+	bool enable_latch = false;
+	bool disable_latch = false;
+	int ret;
+
+	if (offset == glc->le_gpio) {
+		enable_latch = value ^ glc->le_active_low;
+		disable_latch = !enable_latch;
+	}
+
+	gpio_latch_lock(glc, enable_latch);
+	ret = gpiod_direction_output_raw(glc->gpios[offset], value);
+	gpio_latch_unlock(glc, disable_latch);
+
+	return ret;
+}
+
+static int gpio_latch_probe(struct platform_device *pdev)
+{
+	struct gpio_latch_chip *glc;
+	struct gpio_chip *gc;
+	struct device *dev = &pdev->dev;
+	struct device_node *of_node = dev->of_node;
+	int i, n;
+
+	glc = devm_kzalloc(dev, sizeof(*glc), GFP_KERNEL);
+	if (!glc)
+		return -ENOMEM;
+
+	mutex_init(&glc->mutex);
+	mutex_init(&glc->latch_mutex);
+
+	n = gpiod_count(dev, NULL);
+	if (n <= 0) {
+		dev_err(dev, "failed to get gpios: %d\n", n);
+		return n;
+	} else if (n != GPIO_LATCH_LINES) {
+		dev_err(dev, "expected %d gpios\n", GPIO_LATCH_LINES);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < n; i++) {
+		glc->gpios[i] = devm_gpiod_get_index_optional(dev, NULL, i,
+			GPIOD_OUT_LOW);
+		if (IS_ERR(glc->gpios[i])) {
+			dev_err(dev, "failed to get gpio %d: %d\n", i,
+				PTR_ERR(glc->gpios[i]));
+			return PTR_ERR(glc->gpios[i]);
+		}
+	}
+
+	glc->le_gpio = 8;
+	glc->le_active_low = gpiod_is_active_low(glc->gpios[glc->le_gpio]);
+
+	if (!glc->gpios[glc->le_gpio]) {
+		dev_err(dev, "missing required latch-enable gpio %d\n",
+			glc->le_gpio);
+		return -EINVAL;
+	}
+
+	gc = &glc->gc;
+	gc->label = GPIO_LATCH_DRIVER_NAME;
+	gc->can_sleep = true;
+	gc->base = -1;
+	gc->ngpio = GPIO_LATCH_LINES;
+	gc->get = gpio_latch_get;
+	gc->set = gpio_latch_set;
+	gc->direction_output = gpio_latch_direction_output;
+	gc->of_node = of_node;
+
+	platform_set_drvdata(pdev, glc);
+
+	i = gpiochip_add(&glc->gc);
+	if (i) {
+		dev_err(dev, "gpiochip_add() failed: %d\n", i);
+		return i;
+	}
+
+	return 0;
+}
+
+static int gpio_latch_remove(struct platform_device *pdev)
+{
+	struct gpio_latch_chip *glc = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&glc->gc);
+	return 0;
+}
+
+static const struct of_device_id gpio_latch_match[] = {
+	{ .compatible = GPIO_LATCH_DRIVER_NAME },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, gpio_latch_match);
+
+static struct platform_driver gpio_latch_driver = {
+	.probe = gpio_latch_probe,
+	.remove = gpio_latch_remove,
+	.driver = {
+		.name = GPIO_LATCH_DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = gpio_latch_match,
+	},
+};
+
+module_platform_driver(gpio_latch_driver);
+
+MODULE_DESCRIPTION("GPIO latch driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Denis Kalashnikov <denis281089@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" GPIO_LATCH_DRIVER_NAME);

target/linux/ath79/files/drivers/mtd/nand/raw/ar934x_nand.c

@@ -1266,7 +1266,6 @@ static int ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc)
 		 * Writing a subpage separately is not supported, because
 		 * the controller only does ECC on full-page accesses.
 		 */
-		nand->options = NAND_NO_SUBPAGE_WRITE;
 
 		nand->ecc.size = 512;
 		nand->ecc.bytes = 7;
@@ -1325,6 +1324,9 @@ static int ar934x_nfc_attach_chip(struct nand_chip *nand)
 	if (ret)
 		return ret;
 
+	if (mtd->writesize == 2048)
+		nand->options |= NAND_NO_SUBPAGE_WRITE;
+
 	if (nand->ecc.mode == NAND_ECC_HW) {
 		ret = ar934x_nfc_setup_hwecc(nfc);
 		if (ret)

target/linux/ath79/files/drivers/mtd/nand/raw/rb91x_nand.c

@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  MikroTik RB91x NAND flash driver
+ *
+ *  Main part is copied from original driver written by Gabor Juhos.
+ *
+ *  Copyright (C) 2013-2014 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+/*
+ * WARNING: to speed up NAND reading/writing we are working with SoC GPIO
+ * controller registers directly -- not through standard GPIO API.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/version.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+/* Bit masks for NAND data lines in ath79 gpio 32-bit register */
+#define RB91X_NAND_NRW_BIT BIT(12)
+#define RB91X_NAND_DATA_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) \
+			    | BIT(13) | BIT(14) | BIT(15))
+#define RB91X_NAND_LOW_DATA_MASK	0x1f
+#define RB91X_NAND_HIGH_DATA_MASK	0xe0
+#define RB91X_NAND_HIGH_DATA_SHIFT	8
+
+enum rb91x_nand_gpios {
+	RB91X_NAND_READ,/* Read */
+	RB91X_NAND_RDY, /* NAND Ready */
+	RB91X_NAND_NCE, /* Chip Enable. Active low */
+	RB91X_NAND_CLE, /* Command Latch Enable */
+	RB91X_NAND_ALE, /* Address Latch Enable */
+	RB91X_NAND_NRW, /* Read/Write. Active low */
+	RB91X_NAND_NLE, /* Latch Enable. Active low */
+
+	RB91X_NAND_GPIOS,
+};
+
+struct rb91x_nand_drvdata {
+	struct nand_chip chip;
+	struct device *dev;
+	struct gpio_desc **gpio;
+	void __iomem *ath79_gpio_base;
+};
+
+static inline void rb91x_nand_latch_lock(struct rb91x_nand_drvdata *drvdata,
+					 int lock)
+{
+	gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_NLE], lock);
+}
+
+static int rb91x_ooblayout_ecc(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	switch (section) {
+	case 0:
+		oobregion->offset = 8;
+		oobregion->length = 3;
+		return 0;
+	case 1:
+		oobregion->offset = 13;
+		oobregion->length = 3;
+		return 0;
+	default:
+		return -ERANGE;
+	}
+}
+
+static int rb91x_ooblayout_free(struct mtd_info *mtd, int section,
+				struct mtd_oob_region *oobregion)
+{
+	switch (section) {
+	case 0:
+		oobregion->offset = 0;
+		oobregion->length = 4;
+		return 0;
+	case 1:
+		oobregion->offset = 4;
+		oobregion->length = 1;
+		return 0;
+	case 2:
+		oobregion->offset = 6;
+		oobregion->length = 2;
+		return 0;
+	case 3:
+		oobregion->offset = 11;
+		oobregion->length = 2;
+		return 0;
+	default:
+		return -ERANGE;
+	}
+}
+
+static const struct mtd_ooblayout_ops rb91x_nand_ecclayout_ops = {
+	.ecc = rb91x_ooblayout_ecc,
+	.free = rb91x_ooblayout_free,
+};
+
+static void rb91x_nand_write(struct rb91x_nand_drvdata *drvdata,
+			     const u8 *buf,
+			     unsigned len)
+{
+	void __iomem *base = drvdata->ath79_gpio_base;
+	u32 oe_reg;
+	u32 out_reg;
+	u32 out;
+	unsigned i;
+
+	rb91x_nand_latch_lock(drvdata, 1);
+
+	oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
+	out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
+
+	/* Set data lines to output mode */
+	__raw_writel(oe_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRW_BIT),
+		     base + AR71XX_GPIO_REG_OE);
+
+	out = out_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRW_BIT);
+	for (i = 0; i != len; i++) {
+		u32 data;
+
+		data = (buf[i] & RB91X_NAND_HIGH_DATA_MASK) <<
+			RB91X_NAND_HIGH_DATA_SHIFT;
+		data |= buf[i] & RB91X_NAND_LOW_DATA_MASK;
+		data |= out;
+		__raw_writel(data, base + AR71XX_GPIO_REG_OUT);
+
+		/* Deactivate WE line */
+		data |= RB91X_NAND_NRW_BIT;
+		__raw_writel(data, base + AR71XX_GPIO_REG_OUT);
+		/* Flush write */
+		__raw_readl(base + AR71XX_GPIO_REG_OUT);
+	}
+
+	/* Restore registers */
+	__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
+	__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
+	/* Flush write */
+	__raw_readl(base + AR71XX_GPIO_REG_OUT);
+
+	rb91x_nand_latch_lock(drvdata, 0);
+}
+
+static void rb91x_nand_read(struct rb91x_nand_drvdata *drvdata,
+			    u8 *read_buf,
+			    unsigned len)
+{
+	void __iomem *base = drvdata->ath79_gpio_base;
+	u32 oe_reg;
+	u32 out_reg;
+	unsigned i;
+
+	/* Enable read mode */
+	gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_READ], 1);
+
+	rb91x_nand_latch_lock(drvdata, 1);
+
+	/* Save registers */
+	oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
+	out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
+
+	/* Set data lines to input mode */
+	__raw_writel(oe_reg | RB91X_NAND_DATA_BITS,
+		     base + AR71XX_GPIO_REG_OE);
+
+	for (i = 0; i < len; i++) {
+		u32 in;
+		u8 data;
+
+		/* Activate RE line */
+		__raw_writel(RB91X_NAND_NRW_BIT, base + AR71XX_GPIO_REG_CLEAR);
+		/* Flush write */
+		__raw_readl(base + AR71XX_GPIO_REG_CLEAR);
+
+		/* Read input lines */
+		in = __raw_readl(base + AR71XX_GPIO_REG_IN);
+
+		/* Deactivate RE line */
+		__raw_writel(RB91X_NAND_NRW_BIT, base + AR71XX_GPIO_REG_SET);
+
+		data = (in & RB91X_NAND_LOW_DATA_MASK);
+		data |= (in >> RB91X_NAND_HIGH_DATA_SHIFT) &
+			RB91X_NAND_HIGH_DATA_MASK;
+
+		read_buf[i] = data;
+	}
+
+	/* Restore  registers */
+	__raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
+	__raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
+	/* Flush write */
+	__raw_readl(base + AR71XX_GPIO_REG_OUT);
+
+	rb91x_nand_latch_lock(drvdata, 0);
+
+	/* Disable read mode */
+	gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_READ], 0);
+}
+
+static int rb91x_nand_dev_ready(struct nand_chip *chip)
+{
+	struct rb91x_nand_drvdata *drvdata = (struct rb91x_nand_drvdata *)(chip->priv);
+
+	return gpiod_get_value_cansleep(drvdata->gpio[RB91X_NAND_RDY]);
+}
+
+static void rb91x_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
+				unsigned int ctrl)
+{
+	struct rb91x_nand_drvdata *drvdata = chip->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_CLE],
+					(ctrl & NAND_CLE) ? 1 : 0);
+		gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_ALE],
+					(ctrl & NAND_ALE) ? 1 : 0);
+		gpiod_set_value_cansleep(drvdata->gpio[RB91X_NAND_NCE],
+					(ctrl & NAND_NCE) ? 1 : 0);
+	}
+
+	if (cmd != NAND_CMD_NONE) {
+		u8 t = cmd;
+
+		rb91x_nand_write(drvdata, &t, 1);
+	}
+}
+
+static u8 rb91x_nand_read_byte(struct nand_chip *chip)
+{
+	u8 data = 0xff;
+
+	rb91x_nand_read(chip->priv, &data, 1);
+
+	return data;
+}
+
+static void rb91x_nand_read_buf(struct nand_chip *chip, u8 *buf, int len)
+{
+	rb91x_nand_read(chip->priv, buf, len);
+}
+
+static void rb91x_nand_write_buf(struct nand_chip *chip, const u8 *buf, int len)
+{
+	rb91x_nand_write(chip->priv, buf, len);
+}
+
+static void rb91x_nand_release(struct rb91x_nand_drvdata *drvdata)
+{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)
+	mtd_device_unregister(nand_to_mtd(&drvdata->chip));
+	nand_cleanup(&drvdata->chip);
+#else
+	nand_release(&drvdata->chip);
+#endif
+}
+
+static int rb91x_nand_probe(struct platform_device *pdev)
+{
+	struct rb91x_nand_drvdata *drvdata;
+	struct mtd_info *mtd;
+	int r;
+	struct device *dev = &pdev->dev;
+	struct gpio_descs *gpios;
+
+	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, drvdata);
+
+	gpios = gpiod_get_array(dev, NULL, GPIOD_OUT_LOW);
+	if (IS_ERR(gpios)) {
+		dev_err(dev, "failed to get gpios: %d\n", (int)gpios);
+		return -EINVAL;
+	}
+
+	if (gpios->ndescs != RB91X_NAND_GPIOS) {
+		dev_err(dev, "expected %d gpios\n", RB91X_NAND_GPIOS);
+		return -EINVAL;
+	}
+
+	drvdata->gpio = gpios->desc;
+
+	gpiod_direction_input(drvdata->gpio[RB91X_NAND_RDY]);
+
+	drvdata->ath79_gpio_base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+
+	drvdata->dev = dev;
+
+	drvdata->chip.priv = drvdata;
+
+	drvdata->chip.legacy.cmd_ctrl = rb91x_nand_cmd_ctrl;
+	drvdata->chip.legacy.dev_ready = rb91x_nand_dev_ready;
+	drvdata->chip.legacy.read_byte = rb91x_nand_read_byte;
+	drvdata->chip.legacy.write_buf = rb91x_nand_write_buf;
+	drvdata->chip.legacy.read_buf = rb91x_nand_read_buf;
+
+	drvdata->chip.legacy.chip_delay = 25;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,9,0)
+	drvdata->chip.ecc.engine_type      = NAND_ECC_ENGINE_TYPE_SOFT;
+	drvdata->chip.ecc.algo             = NAND_ECC_ALGO_HAMMING;
+#else
+	drvdata->chip.ecc.mode             = NAND_ECC_SOFT;
+	drvdata->chip.ecc.algo             = NAND_ECC_HAMMING;
+#endif
+	drvdata->chip.options = NAND_NO_SUBPAGE_WRITE;
+
+	r = nand_scan(&drvdata->chip, 1);
+	if (r) {
+		dev_err(dev, "nand_scan() failed: %d\n", r);
+		return r;
+	}
+
+	mtd = nand_to_mtd(&drvdata->chip);
+	mtd->dev.parent = dev;
+	mtd_set_of_node(mtd, dev->of_node);
+	mtd->owner = THIS_MODULE;
+	if (mtd->writesize == 512)
+		mtd_set_ooblayout(mtd, &rb91x_nand_ecclayout_ops);
+
+	r = mtd_device_register(mtd, NULL, 0);
+	if (r) {
+		dev_err(dev, "mtd_device_register() failed: %d\n",
+			r);
+		goto err_release_nand;
+	}
+
+	return 0;
+
+err_release_nand:
+	rb91x_nand_release(drvdata);
+	return r;
+}
+
+static int rb91x_nand_remove(struct platform_device *pdev)
+{
+	struct rb91x_nand_drvdata *drvdata = platform_get_drvdata(pdev);
+
+	rb91x_nand_release(drvdata);
+
+	return 0;
+}
+
+static const struct of_device_id rb91x_nand_match[] = {
+	{ .compatible = "mikrotik,rb91x-nand" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, rb91x_nand_match);
+
+static struct platform_driver rb91x_nand_driver = {
+	.probe	= rb91x_nand_probe,
+	.remove	= rb91x_nand_remove,
+	.driver	= {
+		.name	= "rb91x-nand",
+		.owner	= THIS_MODULE,
+		.of_match_table = rb91x_nand_match,
+	},
+};
+
+module_platform_driver(rb91x_nand_driver);
+
+MODULE_DESCRIPTION("MikrotTik RB91x NAND flash driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Denis Kalashnikov <denis281089@gmail.com>");
+MODULE_LICENSE("GPL v2");

target/linux/ath79/generic/base-files/etc/board.d/01_leds

@@ -220,6 +220,9 @@ glinet,gl-x750)
 hak5,lan-turtle)
 	ucidef_set_led_netdev "wan" "WAN" "orange:system" "eth1"
 	;;
+joyit,jt-or750i)
+	ucidef_set_led_default "ath10k" "ath10k-disable" "ath10k-phy0" "0"
+	;;
 meraki,mr12|\
 tplink,cpe210-v2|\
 tplink,cpe210-v3)

target/linux/ath79/generic/base-files/etc/board.d/02_network

@@ -46,6 +46,7 @@ ath79_setup_interfaces()
 	netgear,ex7300|\
 	ocedo,koala|\
 	ocedo,raccoon|\
+	onion,omega|\
 	openmesh,mr600-v1|\
 	openmesh,mr600-v2|\
 	openmesh,mr900-v1|\
@@ -270,6 +271,11 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
 		;;
+	joyit,jt-or750i)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
 	librerouter,librerouter-v1)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "5:wan" "6@eth1" "4:lan"

target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -24,6 +24,7 @@ case "$FIRMWARE" in
 	comfast,cf-wr650ac-v1|\
 	comfast,cf-wr650ac-v2|\
 	devolo,magic-2-wifi|\
+	joyit,jt-or750i|\
 	qxwlan,e1700ac-v2-8m|\
 	qxwlan,e1700ac-v2-16m|\
 	qxwlan,e600gac-v2-8m|\

target/linux/ath79/image/generic.mk

@@ -1343,6 +1343,15 @@ define Device/jjplus_ja76pf2
 endef
 TARGET_DEVICES += jjplus_ja76pf2
 
+define Device/joyit_jt-or750i
+  SOC := qca9531
+  DEVICE_VENDOR := Joy-IT
+  DEVICE_MODEL := JT-OR750i
+  DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
+  IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += joyit_jt-or750i
+
 define Device/librerouter_librerouter-v1
   SOC := qca9558
   DEVICE_VENDOR := Librerouter
@@ -1594,6 +1603,19 @@ define Device/ocedo_ursus
 endef
 TARGET_DEVICES += ocedo_ursus
 
+define Device/onion_omega
+  $(Device/tplink-16mlzma)
+  SOC := ar9331
+  DEVICE_VENDOR := Onion
+  DEVICE_MODEL := Omega
+  DEVICE_PACKAGES := kmod-usb-chipidea2
+  SUPPORTED_DEVICES += onion-omega
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
+  IMAGE_SIZE := 16192k
+  TPLINK_HWID := 0x04700001
+endef
+TARGET_DEVICES += onion_omega
+
 define Device/openmesh_common_64k
   DEVICE_VENDOR := OpenMesh
   DEVICE_PACKAGES := uboot-envtools

target/linux/ath79/image/mikrotik.mk

@@ -9,6 +9,15 @@ define Device/mikrotik_routerboard-493g
 endef
 TARGET_DEVICES += mikrotik_routerboard-493g
 
+define Device/mikrotik_routerboard-912uag-2hpnd
+  $(Device/mikrotik_nand)
+  SOC := ar9342
+  DEVICE_MODEL := RouterBOARD 912UAG-2HPnD
+  DEVICE_PACKAGES += kmod-usb-ehci kmod-usb2
+  SUPPORTED_DEVICES += rb-912uag-2hpnd
+endef
+TARGET_DEVICES += mikrotik_routerboard-912uag-2hpnd
+
 define Device/mikrotik_routerboard-921gs-5hpacd-15s
   $(Device/mikrotik_nand)
   SOC := qca9558

target/linux/ath79/mikrotik/base-files/etc/board.d/02_network

@@ -15,6 +15,7 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch1" \
 			"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
 		;;
+	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-921gs-5hpacd-15s|\
 	mikrotik,routerboard-lhg-2nd|\
 	mikrotik,routerboard-sxt-5nd-r2|\
@@ -37,6 +38,7 @@ ath79_setup_macs()
 	local mac_base="$(cat /sys/firmware/mikrotik/hard_config/mac_base)"
 
 	case "$board" in
+	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-921gs-5hpacd-15s|\
 	mikrotik,routerboard-lhg-2nd|\
 	mikrotik,routerboard-sxt-5nd-r2|\

target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom

@@ -23,6 +23,7 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath9k-eeprom-ahb-18100000.wmac.bin")
 	case $board in
+	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-lhg-2nd|\
 	mikrotik,routerboard-sxt-5nd-r2|\
 	mikrotik,routerboard-wapr-2nd)

target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh

@@ -32,6 +32,7 @@ platform_do_upgrade() {
 
 	case "$board" in
 	mikrotik,routerboard-493g|\
+	mikrotik,routerboard-912uag-2hpnd|\
 	mikrotik,routerboard-921gs-5hpacd-15s|\
 	mikrotik,routerboard-922uags-5hpacd|\
 	mikrotik,routerboard-sxt-5nd-r2)

target/linux/ath79/mikrotik/config-default

@@ -15,6 +15,7 @@ CONFIG_MTD_NAND_AR934X=y
 CONFIG_MTD_NAND_CORE=y
 CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_RB4XX=y
+CONFIG_MTD_NAND_RB91X=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_ROUTERBOOT_PARTS=y
 CONFIG_MTD_SPI_NAND=y

target/linux/ath79/patches-5.4/0003-leds-add-reset-controller-based-driver.patch

@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -823,6 +823,17 @@ config LEDS_LM36274
+@@ -824,6 +824,17 @@ config LEDS_LM36274
  	  Say Y to enable the LM36274 LED driver for TI LMU devices.
  	  This supports the LED device LM36274.
  

target/linux/ath79/patches-5.4/408-mtd-redboot_partition_scan.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/parsers/redboot.c
 +++ b/drivers/mtd/parsers/redboot.c
-@@ -85,12 +85,18 @@ static int parse_redboot_partitions(stru
+@@ -90,12 +90,18 @@ static int parse_redboot_partitions(stru
  
  	parse_redboot_of(master);
  
@@ -19,7 +19,7 @@
  				return -EIO;
  			}
  			offset -= master->erasesize;
-@@ -103,10 +109,6 @@ static int parse_redboot_partitions(stru
+@@ -108,10 +114,6 @@ static int parse_redboot_partitions(stru
  				goto nogood;
  		}
  	}
@@ -30,7 +30,7 @@
  
  	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
  	       master->name, offset);
-@@ -179,6 +181,11 @@ static int parse_redboot_partitions(stru
+@@ -184,6 +186,11 @@ static int parse_redboot_partitions(stru
  	}
  	if (i == numslots) {
  		/* Didn't find it */

target/linux/ath79/patches-5.4/700-at803x-force-ar8033-features.patch

@@ -0,0 +1,25 @@
+PHY capabilities are currently read from the fiber status page, thus
+Linux won't advertise 10 / 100 Base-T operation modes, effectively
+limiting operation to 1000 Base-T.
+
+Statically set the PHYs capabilities, avoiding autodetection.
+
+The issue itself is properly fixed kernel upstream, however backporting
+efforts to OpenWrt master resulted in breaking the fiber operation for
+another target.
+
+This is currently only known to be necessary for the Ubiquiti
+UniFi AC series, so enabling it in the ath79 target should not
+break somewhere else.
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -497,7 +497,7 @@ static struct phy_driver at803x_driver[]
+ 	.get_wol		= at803x_get_wol,
+ 	.suspend		= at803x_suspend,
+ 	.resume			= at803x_resume,
+-	/* PHY_GBIT_FEATURES */
++	.features		= PHY_GBIT_FEATURES,
+ 	.read_status		= at803x_read_status,
+ 	.aneg_done		= at803x_aneg_done,
+ 	.ack_interrupt		= &at803x_ack_interrupt,

target/linux/ath79/patches-5.4/910-unaligned_access_hacks.patch

@@ -214,7 +214,7 @@
  #include <linux/uaccess.h>
  #include <linux/ipv6.h>
  #include <linux/icmpv6.h>
-@@ -849,10 +850,10 @@ static void tcp_v6_send_response(const s
+@@ -864,10 +865,10 @@ static void tcp_v6_send_response(const s
  	topt = (__be32 *)(t1 + 1);
  
  	if (tsecr) {
@@ -267,7 +267,7 @@
  		case IPV6_2292HOPOPTS:
 --- a/net/ipv6/exthdrs.c
 +++ b/net/ipv6/exthdrs.c
-@@ -752,7 +752,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
+@@ -751,7 +751,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
  		goto drop;
  	}
  

target/linux/ath79/patches-5.4/920-mikrotik-rb4xx.patch

@@ -5,7 +5,7 @@
  	  device found on several devices in RAVE line of hardware.
  
 +config MFD_RB4XX_CPLD
-+	tristate "CPLD driver for Mikrotik RB4xx series boards
++	tristate "CPLD driver for Mikrotik RB4xx series boards"
 +	select MFD_CORE
 +	depends on ATH79 || COMPILE_TEST
 +	help
@@ -23,7 +23,7 @@
 +obj-$(CONFIG_MFD_RB4XX_CPLD)	+= rb4xx-cpld.o
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
-@@ -1406,6 +1406,12 @@ config GPIO_SODAVILLE
+@@ -1408,6 +1408,12 @@ config GPIO_SODAVILLE
  	help
  	  Say Y here to support Intel Sodaville GPIO.
  

target/linux/ath79/patches-5.4/939-mikrotik-rb91x.patch

@@ -0,0 +1,44 @@
+--- a/drivers/mtd/nand/raw/Kconfig
++++ b/drivers/mtd/nand/raw/Kconfig
+@@ -559,4 +559,8 @@ config MTD_NAND_RB4XX
+ 	  Enables support for the NAND flash chip on Mikrotik Routerboard
+ 	  RB4xx series.
+ 
++config MTD_NAND_RB91X
++	tristate "MikroTik RB91x NAND driver support"
++	depends on ATH79 && MTD_RAW_NAND
++
+ endif # MTD_RAW_NAND
+--- a/drivers/mtd/nand/raw/Makefile
++++ b/drivers/mtd/nand/raw/Makefile
+@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_STM32_FMC2)	+= stm
+ obj-$(CONFIG_MTD_NAND_MESON)		+= meson_nand.o
+ obj-$(CONFIG_MTD_NAND_AR934X)		+= ar934x_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)		+= nand_rb4xx.o
++obj-$(CONFIG_MTD_NAND_RB91X)		+= rb91x_nand.o
+ 
+ nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
+ nand-objs += nand_onfi.o
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -130,6 +130,10 @@ config GPIO_ATH79
+ 	  Select this option to enable GPIO driver for
+ 	  Atheros AR71XX/AR724X/AR913X SoC devices.
+ 
++config GPIO_LATCH
++	tristate "MikroTik RouterBOARD GPIO latch support"
++	depends on ATH79
++
+ config GPIO_RASPBERRYPI_EXP
+ 	tristate "Raspberry Pi 3 GPIO Expander"
+ 	default RASPBERRYPI_FIRMWARE
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -67,6 +67,7 @@ obj-$(CONFIG_GPIO_IT87)			+= gpio-it87.o
+ obj-$(CONFIG_GPIO_IXP4XX)		+= gpio-ixp4xx.o
+ obj-$(CONFIG_GPIO_JANZ_TTL)		+= gpio-janz-ttl.o
+ obj-$(CONFIG_GPIO_KEMPLD)		+= gpio-kempld.o
++obj-$(CONFIG_GPIO_LATCH)		+= gpio-latch.o
+ obj-$(CONFIG_GPIO_LOONGSON1)		+= gpio-loongson1.o
+ obj-$(CONFIG_GPIO_LOONGSON)		+= gpio-loongson.o
+ obj-$(CONFIG_GPIO_LP3943)		+= gpio-lp3943.o

target/linux/bcm27xx/patches-5.4/950-0012-dmaengine-bcm2835-Load-driver-early-and-support-lega.patch

@@ -20,7 +20,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
 
 --- a/drivers/dma/Kconfig
 +++ b/drivers/dma/Kconfig
-@@ -133,7 +133,7 @@ config COH901318
+@@ -134,7 +134,7 @@ config COH901318
  
  config DMA_BCM2835
  	tristate "BCM2835 DMA engine support"

target/linux/bcm27xx/patches-5.4/950-0030-lan78xx-Enable-LEDs-and-auto-negotiation.patch

@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/net/usb/lan78xx.c
 +++ b/drivers/net/usb/lan78xx.c
-@@ -2461,6 +2461,11 @@ static int lan78xx_reset(struct lan78xx_
+@@ -2469,6 +2469,11 @@ static int lan78xx_reset(struct lan78xx_
  	int ret = 0;
  	unsigned long timeout;
  	u8 sig;
@@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  
  	ret = lan78xx_read_reg(dev, HW_CFG, &buf);
  	buf |= HW_CFG_LRST_;
-@@ -2514,6 +2519,9 @@ static int lan78xx_reset(struct lan78xx_
+@@ -2522,6 +2527,9 @@ static int lan78xx_reset(struct lan78xx_
  
  	ret = lan78xx_read_reg(dev, HW_CFG, &buf);
  	buf |= HW_CFG_MEF_;
@@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	ret = lan78xx_write_reg(dev, HW_CFG, buf);
  
  	ret = lan78xx_read_reg(dev, USB_CFG0, &buf);
-@@ -2569,6 +2577,9 @@ static int lan78xx_reset(struct lan78xx_
+@@ -2577,6 +2585,9 @@ static int lan78xx_reset(struct lan78xx_
  			buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
  		}
  	}

target/linux/bcm27xx/patches-5.4/950-0037-Add-dwc_otg-driver.patch

@@ -1040,7 +1040,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
  }
 --- a/drivers/usb/core/hub.c
 +++ b/drivers/usb/core/hub.c
-@@ -5319,7 +5319,7 @@ static void port_event(struct usb_hub *h
+@@ -5369,7 +5369,7 @@ static void port_event(struct usb_hub *h
  		port_dev->over_current_count++;
  		port_over_current_notify(port_dev);
  
@@ -1051,7 +1051,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
  				USB_PORT_FEAT_C_OVER_CURRENT);
 --- a/drivers/usb/core/message.c
 +++ b/drivers/usb/core/message.c
-@@ -1993,6 +1993,85 @@ free_interfaces:
+@@ -1999,6 +1999,85 @@ free_interfaces:
  	if (cp->string == NULL &&
  			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
  		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);