OpenWrt v21.02.1: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

config/Config-kernel.in

@@ -436,34 +436,22 @@ config KERNEL_PROVE_LOCKING
 	select KERNEL_DEBUG_KERNEL
 	default n
 
-config KERNEL_LOCKUP_DETECTOR
-	bool "Compile the kernel with detect Hard and Soft Lockups"
+config KERNEL_SOFTLOCKUP_DETECTOR
+	bool "Compile the kernel with detect Soft Lockups"
 	depends on KERNEL_DEBUG_KERNEL
 	help
 	  Say Y here to enable the kernel to act as a watchdog to detect
-	  hard and soft lockups.
+	  soft lockups.
 
 	  Softlockups are bugs that cause the kernel to loop in kernel
 	  mode for more than 20 seconds, without giving other tasks a
 	  chance to run.  The current stack trace is displayed upon
 	  detection and the system will stay locked up.
 
-	  Hardlockups are bugs that cause the CPU to loop in kernel mode
-	  for more than 10 seconds, without letting other interrupts have a
-	  chance to run.  The current stack trace is displayed upon detection
-	  and the system will stay locked up.
-
-	  The overhead should be minimal.  A periodic hrtimer runs to
-	  generate interrupts and kick the watchdog task every 4 seconds.
-	  An NMI is generated every 10 seconds or so to check for hardlockups.
-
-	  The frequency of hrtimer and NMI events and the soft and hard lockup
-	  thresholds can be controlled through the sysctl watchdog_thresh.
-
 config KERNEL_DETECT_HUNG_TASK
 	bool "Compile the kernel with detect Hung Tasks"
 	depends on KERNEL_DEBUG_KERNEL
-	default KERNEL_LOCKUP_DETECTOR
+	default KERNEL_SOFTLOCKUP_DETECTOR
 	help
 	  Say Y here to enable the kernel to detect "hung tasks",
 	  which are bugs that cause the task to be stuck in

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://git.openwrt.org/feed/packages.git^e738d2faf1c4ed68094f1d5da075d2d92fb35049
-src-git luci https://git.openwrt.org/project/luci.git^2778366916f815d4af9534218bef10aa3aad3c01
-src-git routing https://git.openwrt.org/feed/routing.git^2baff33918c089fd3744c7192f8ae7a29c47a8d7
-src-git telephony https://git.openwrt.org/feed/telephony.git^ee64ec42e981e1f9e5a21cd3478497987ff76680
+src-git packages https://git.openwrt.org/feed/packages.git^ded142471e36831d2af63c7fe5062c4367f8ccd2
+src-git luci https://git.openwrt.org/project/luci.git^d24760e60a83b63f316c7b186e30636b5baa5481
+src-git routing https://git.openwrt.org/feed/routing.git^9e7698f20d1edf8f912fbce2f21400f3cc772b31
+src-git telephony https://git.openwrt.org/feed/telephony.git^ed2719867150a9bfc85bf41dff52ef8443820f2a

include/feeds.mk

@@ -43,5 +43,11 @@ endef
 
 # 1: package name
 define GetABISuffix
-$(if $(filter-out kmod-%,$(1)),$(if $(ABIV_$(1)),$(ABIV_$(1)),$(foreach v,$(wildcard $(STAGING_DIR)/pkginfo/$(1).version),$(shell cat $(v)))))
+$(if $(ABIV_$(1)),$(ABIV_$(1)),$(call FormatABISuffix,$(1),$(foreach v,$(wildcard $(STAGING_DIR)/pkginfo/$(1).version),$(shell cat $(v)))))
+endef
+
+# 1: package name
+# 2: abi version
+define FormatABISuffix
+$(if $(filter-out kmod-%,$(1)),$(if $(2),$(if $(filter %0 %1 %2 %3 %4 %5 %6 %7 %8 %9,$(1)),-)$(2)))
 endef

include/kernel-version.mk

@@ -6,9 +6,9 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-5.4 = .124
+LINUX_VERSION-5.4 = .154
 
-LINUX_KERNEL_HASH-5.4.124 = f7f29dda2b042d7b5986d18274413131cf70e17288c05e9a683df1f46c507d82
+LINUX_KERNEL_HASH-5.4.154 = 058994f4666b6b0474a4d5228583e394594e406783b7e93d487c2a66c35f3c06
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

include/package-ipkg.mk

@@ -99,7 +99,7 @@ _endef=endef
 
 ifeq ($(DUMP),)
   define BuildTarget/ipkg
-    ABIV_$(1):=$(if $(filter-out kmod-%,$(1)),$(ABI_VERSION))
+    ABIV_$(1):=$(call FormatABISuffix,$(1),$(ABI_VERSION))
     PDIR_$(1):=$(call FeedPackageDir,$(1))
     IPKG_$(1):=$$(PDIR_$(1))/$(1)$$(ABIV_$(1))_$(VERSION)_$(PKGARCH).ipk
     IDIR_$(1):=$(PKG_BUILD_DIR)/ipkg-$(PKGARCH)/$(1)

include/prereq-build.mk

@@ -153,20 +153,26 @@ $(eval $(call SetupHostCommand,perl,Please install Perl 5.x, \
 $(eval $(call CleanupPython2))
 
 $(eval $(call SetupHostCommand,python,Please install Python >= 3.5, \
+	python3.10 -V 2>&1 | grep 'Python 3', \
 	python3.9 -V 2>&1 | grep 'Python 3', \
 	python3.8 -V 2>&1 | grep 'Python 3', \
 	python3.7 -V 2>&1 | grep 'Python 3', \
 	python3.6 -V 2>&1 | grep 'Python 3', \
 	python3.5 -V 2>&1 | grep 'Python 3', \
-	python3 -V 2>&1 | grep -E 'Python 3\.[5-9]\.?'))
+	python3 -V 2>&1 | grep -E 'Python 3\.([5-9]|10)\.?'))
 
 $(eval $(call SetupHostCommand,python3,Please install Python >= 3.5, \
+	python3.10 -V 2>&1 | grep 'Python 3', \
 	python3.9 -V 2>&1 | grep 'Python 3', \
 	python3.8 -V 2>&1 | grep 'Python 3', \
 	python3.7 -V 2>&1 | grep 'Python 3', \
 	python3.6 -V 2>&1 | grep 'Python 3', \
 	python3.5 -V 2>&1 | grep 'Python 3', \
-	python3 -V 2>&1 | grep -E 'Python 3\.[5-9]\.?'))
+	python3 -V 2>&1 | grep -E 'Python 3\.([5-9]|10)\.?'))
+
+$(eval $(call TestHostCommand,python3-distutils, \
+	Please install the Python3 distutils module, \
+	$(STAGING_DIR_HOST)/bin/python3 -c 'import distutils'))
 
 $(eval $(call SetupHostCommand,git,Please install Git (git-core) >= 1.7.12.2, \
 	git --exec-path | xargs -I % -- grep -q -- --recursive %/git-submodule))
@@ -178,7 +184,9 @@ $(eval $(call SetupHostCommand,rsync,Please install 'rsync', \
 	rsync --version </dev/null))
 
 $(eval $(call SetupHostCommand,which,Please install 'which', \
-	which which | grep which))
+	/usr/bin/which which, \
+	/bin/which which, \
+	which which))
 
 $(STAGING_DIR_HOST)/bin/mkhash: $(SCRIPT_DIR)/mkhash.c
 	mkdir -p $(dir $@)

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.0-rc3)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02.1)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16172-2aba3e9784)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r16325-88151b8303)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.0-rc3)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02.1)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/base-files/files/bin/config_generate

@@ -114,9 +114,17 @@ generate_network() {
 			add network device
 			set network.@device[-1].name='br-$1'
 			set network.@device[-1].type='bridge'
-			set network.@device[-1].macaddr='$macaddr'
 		EOF
 		for port in $ports; do uci add_list network.@device[-1].ports="$port"; done
+		[ -n "$macaddr" ] && {
+			for port in $ports; do
+				uci -q batch <<-EOF
+					add network device
+					set network.@device[-1].name='$port'
+					set network.@device[-1].macaddr='$macaddr'
+				EOF
+			done
+		}
 		device=br-$1
 		type=
 		macaddr=""

package/base-files/files/etc/init.d/system

@@ -4,8 +4,7 @@
 START=10
 USE_PROCD=1
 
-validate_system_section()
-{
+validate_system_section() {
 	uci_load_validate system system "$1" "$2" \
 		'hostname:string:OpenWrt' \
 		'conloglevel:uinteger' \
@@ -23,8 +22,9 @@ system_config() {
 	echo "$hostname" > /proc/sys/kernel/hostname
 	[ -z "$conloglevel" -a -z "$buffersize" ] || dmesg ${conloglevel:+-n $conloglevel} ${buffersize:+-s $buffersize}
 	echo "$timezone" > /tmp/TZ
-	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/$zonename" ] && \
-		ln -sf "/usr/share/zoneinfo/$zonename" /tmp/localtime && rm -f /tmp/TZ
+	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/${zonename// /_}" ] \
+		&& ln -sf "/usr/share/zoneinfo/${zonename// /_}" /tmp/localtime \
+		&& rm -f /tmp/TZ
 
 	# apply timezone to kernel
 	hwclock -u --systz
@@ -35,8 +35,7 @@ reload_service() {
 	config_foreach validate_system_section system system_config
 }
 
-service_triggers()
-{
+service_triggers() {
 	procd_add_reload_trigger "system"
 	procd_add_validation validate_system_section
 }

package/base-files/files/lib/preinit/10_indicate_preinit

@@ -72,14 +72,20 @@ preinit_config_board() {
 
 	json_select network
 		json_select "lan"
-			json_get_vars ifname
+			json_get_vars device
+			json_get_values ports ports
 		json_select ..
 	json_select ..
 
-	[ -n "$ifname" ] || return
+	[ -n "$device" -o -n "$ports" ] || return
+
+	# swconfig uses $device and DSA uses ports
+	[ -z "$ports" ] && {
+		ports="$device"
+	}
 
 	# only use the first one
-	ifname=${ifname%% *}
+	ifname=${ports%% *}
 
 	if [ -x /sbin/swconfig ]; then
 		# configure the switch, if present
@@ -91,6 +97,8 @@ preinit_config_board() {
 	else
 		# trim any vlan ids
 		ifname=${ifname%\.*}
+		# trim any vlan modifiers like :t
+		ifname=${ifname%\:*}
 	fi
 
 	pi_ifname=$ifname

package/base-files/files/sbin/wifi

@@ -130,10 +130,12 @@ wifi_updown() {
 		ubus_wifi_cmd "$cmd" "$2"
 		scan_wifi
 		cmd=up
+		ubus call network reload
 	}
 	[ reconf = "$1" ] && {
 		scan_wifi
 		cmd=reconf
+		ubus call network reload
 	}
 	ubus_wifi_cmd "$cmd" "$2"
 	_wifi_updown "$@"
@@ -246,7 +248,7 @@ case "$1" in
 	reload) wifi_reload "$2";;
 	reload_legacy) wifi_reload_legacy "$2";;
 	--help|help) usage;;
-	reconf) ubus call network reload; wifi_updown "reconf" "$2";;
-	''|up) ubus call network reload; wifi_updown "enable" "$2";;
+	reconf) wifi_updown "reconf" "$2";;
+	''|up) wifi_updown "enable" "$2";;
 	*) usage; exit 1;;
 esac

package/base-files/image-config.in

@@ -183,7 +183,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/releases/21.02.0-rc3"
+		default "https://downloads.openwrt.org/releases/21.02.1"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/uboot-at91/patches/001-fix-Wformat-security.patch

@@ -1,8 +1,6 @@
-diff --git a/cmd/version.c b/cmd/version.c
-index b2fffe99..bcbbeb18 100644
 --- a/cmd/version.c
 +++ b/cmd/version.c
-@@ -18,7 +18,7 @@ static int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+@@ -18,7 +18,7 @@ static int do_version(cmd_tbl_t *cmdtp,
  {
  	char buf[DISPLAY_OPTIONS_BANNER_LENGTH];
  
@@ -11,11 +9,9 @@ index b2fffe99..bcbbeb18 100644
  #ifdef CC_VERSION_STRING
  	puts(CC_VERSION_STRING "\n");
  #endif
-diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c
-index 3425ed11..8c2e1d5c 100644
 --- a/drivers/pinctrl/pinctrl-uclass.c
 +++ b/drivers/pinctrl/pinctrl-uclass.c
-@@ -368,7 +368,7 @@ int pinctrl_get_pin_name(struct udevice *dev, int selector, char *buf,
+@@ -368,7 +368,7 @@ int pinctrl_get_pin_name(struct udevice
  	if (!ops->get_pin_name)
  		return -ENOSYS;
  
@@ -24,11 +20,9 @@ index 3425ed11..8c2e1d5c 100644
  
  	return 0;
  }
-diff --git a/lib/efi_loader/efi_variable.c b/lib/efi_loader/efi_variable.c
-index c316bdfe..5fe8129c 100644
 --- a/lib/efi_loader/efi_variable.c
 +++ b/lib/efi_loader/efi_variable.c
-@@ -522,7 +522,7 @@ efi_status_t EFIAPI efi_set_variable(u16 *variable_name,
+@@ -522,7 +522,7 @@ efi_status_t EFIAPI efi_set_variable(u16
  
  	if (old_size)
  		/* APPEND_WRITE */

package/boot/uboot-at91/patches/010-fix_dtc_compilation_on_host_gcc10.patch

@@ -0,0 +1,46 @@
+From e33a814e772cdc36436c8c188d8c42d019fda639 Mon Sep 17 00:00:00 2001
+From: Dirk Mueller <dmueller@suse.com>
+Date: Tue, 14 Jan 2020 18:53:41 +0100
+Subject: [PATCH] scripts/dtc: Remove redundant YYLOC global declaration
+
+gcc 10 will default to -fno-common, which causes this error at link
+time:
+
+  (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
+
+This is because both dtc-lexer as well as dtc-parser define the same
+global symbol yyloc. Before with -fcommon those were merged into one
+defintion. The proper solution would be to to mark this as "extern",
+however that leads to:
+
+  dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
+   26 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+In file included from dtc-lexer.l:24:
+dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
+  127 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+cc1: all warnings being treated as errors
+
+which means the declaration is completely redundant and can just be
+dropped.
+
+Signed-off-by: Dirk Mueller <dmueller@suse.com>
+Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+[robh: cherry-pick from upstream]
+Cc: stable@vger.kernel.org
+Signed-off-by: Rob Herring <robh@kernel.org>
+---
+ scripts/dtc/dtc-lexer.l | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/scripts/dtc/dtc-lexer.l
++++ b/scripts/dtc/dtc-lexer.l
+@@ -38,7 +38,6 @@ LINECOMMENT	"//".*\n
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */

package/boot/uboot-lantiq/patches/101-fix-crypt-header-clash.patch

@@ -0,0 +1,172 @@
+Fix header clash with system /usr/include/sha1.h and sha256.h when libmd
+is installed.
+
+Backport of u-boot commit "includes: move openssl headers to include/u-boot"
+https://github.com/u-boot/u-boot/commit/2b9912e6a7df7b1f60beb7942bd0e6fa5f9d0167
+
+--- a/board/gdsys/p1022/controlcenterd-id.c
++++ b/board/gdsys/p1022/controlcenterd-id.c
+@@ -30,7 +30,7 @@
+ #include <i2c.h>
+ #include <mmc.h>
+ #include <tpm.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/byteorder.h>
+ #include <asm/unaligned.h>
+ #include <pca9698.h>
+--- a/board/pcs440ep/pcs440ep.c
++++ b/board/pcs440ep/pcs440ep.c
+@@ -13,7 +13,7 @@
+ #include <asm/processor.h>
+ #include <spd_sdram.h>
+ #include <status_led.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/io.h>
+ #include <net.h>
+ #include <ata.h>
+--- a/common/cmd_sha1sum.c
++++ b/common/cmd_sha1sum.c
+@@ -11,7 +11,7 @@
+ #include <common.h>
+ #include <command.h>
+ #include <hash.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ 
+ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+ {
+--- a/common/hash.c
++++ b/common/hash.c
+@@ -14,8 +14,8 @@
+ #include <command.h>
+ #include <hw_sha.h>
+ #include <hash.h>
+-#include <sha1.h>
+-#include <sha256.h>
++#include <u-boot/sha1.h>
++#include <u-boot/sha256.h>
+ #include <asm/io.h>
+ #include <asm/errno.h>
+ 
+--- a/common/image-fit.c
++++ b/common/image-fit.c
+@@ -21,7 +21,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ #endif /* !USE_HOSTCC*/
+ 
+ #include <bootstage.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <u-boot/crc.h>
+ #include <u-boot/md5.h>
+ 
+--- a/common/image.c
++++ b/common/image.c
+@@ -34,7 +34,7 @@
+ #endif
+ 
+ #include <u-boot/md5.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/errno.h>
+ #include <asm/io.h>
+ 
+--- a/drivers/crypto/ace_sha.c
++++ b/drivers/crypto/ace_sha.c
+@@ -5,8 +5,8 @@
+  * SPDX-License-Identifier:	GPL-2.0+
+  */
+ #include <common.h>
+-#include <sha256.h>
+-#include <sha1.h>
++#include <u-boot/sha256.h>
++#include <u-boot/sha1.h>
+ #include <asm/errno.h>
+ #include "ace_sha.h"
+ 
+--- /dev/null
++++ b/include/u-boot/sha1.h
+@@ -0,0 +1 @@
++#include "../sha1.h"
+--- /dev/null
++++ b/include/u-boot/sha256.h
+@@ -0,0 +1 @@
++#include "../sha256.h"
+--- a/lib/rsa/rsa-verify.c
++++ b/lib/rsa/rsa-verify.c
+@@ -7,7 +7,7 @@
+ #include <common.h>
+ #include <fdtdec.h>
+ #include <rsa.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/byteorder.h>
+ #include <asm/errno.h>
+ #include <asm/unaligned.h>
+--- a/lib/sha1.c
++++ b/lib/sha1.c
+@@ -36,7 +36,7 @@
+ #include <string.h>
+ #endif /* USE_HOSTCC */
+ #include <watchdog.h>
+-#include "sha1.h"
++#include <u-boot/sha1.h>
+ 
+ /*
+  * 32-bit integer manipulation macros (big endian)
+--- a/lib/sha256.c
++++ b/lib/sha256.c
+@@ -11,7 +11,7 @@
+ #endif /* USE_HOSTCC */
+ #include <watchdog.h>
+ #include <linux/string.h>
+-#include <sha256.h>
++#include <u-boot/sha256.h>
+ 
+ /*
+  * 32-bit integer manipulation macros (big endian)
+--- a/lib/tpm.c
++++ b/lib/tpm.c
+@@ -7,7 +7,7 @@
+ 
+ #include <common.h>
+ #include <stdarg.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <tpm.h>
+ #include <asm/unaligned.h>
+ 
+--- a/tools/imls/imls.c
++++ b/tools/imls/imls.c
+@@ -24,7 +24,7 @@
+ #include <mtd/mtd-user.h>
+ #endif
+ 
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <libfdt.h>
+ #include <fdt_support.h>
+ #include <image.h>
+--- a/tools/mkimage.h
++++ b/tools/mkimage.h
+@@ -18,7 +18,7 @@
+ #include <sys/stat.h>
+ #include <time.h>
+ #include <unistd.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include "fdt_host.h"
+ 
+ #undef MKIMAGE_DEBUG
+--- a/tools/ubsha1.c
++++ b/tools/ubsha1.c
+@@ -13,7 +13,7 @@
+ #include <errno.h>
+ #include <string.h>
+ #include <sys/stat.h>
+-#include "sha1.h"
++#include <u-boot/sha1.h>
+ 
+ int main (int argc, char **argv)
+ {

package/boot/uboot-layerscape/patches/010-fix_dtc_compilation_on_host_gcc10.patch

@@ -0,0 +1,46 @@
+From e33a814e772cdc36436c8c188d8c42d019fda639 Mon Sep 17 00:00:00 2001
+From: Dirk Mueller <dmueller@suse.com>
+Date: Tue, 14 Jan 2020 18:53:41 +0100
+Subject: [PATCH] scripts/dtc: Remove redundant YYLOC global declaration
+
+gcc 10 will default to -fno-common, which causes this error at link
+time:
+
+  (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
+
+This is because both dtc-lexer as well as dtc-parser define the same
+global symbol yyloc. Before with -fcommon those were merged into one
+defintion. The proper solution would be to to mark this as "extern",
+however that leads to:
+
+  dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
+   26 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+In file included from dtc-lexer.l:24:
+dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
+  127 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+cc1: all warnings being treated as errors
+
+which means the declaration is completely redundant and can just be
+dropped.
+
+Signed-off-by: Dirk Mueller <dmueller@suse.com>
+Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+[robh: cherry-pick from upstream]
+Cc: stable@vger.kernel.org
+Signed-off-by: Rob Herring <robh@kernel.org>
+---
+ scripts/dtc/dtc-lexer.l | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/scripts/dtc/dtc-lexer.l
++++ b/scripts/dtc/dtc-lexer.l
+@@ -38,7 +38,6 @@ LINECOMMENT	"//".*\n
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */

package/kernel/ath10k-ct/Makefile

@@ -1,16 +1,16 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ath10k-ct
-PKG_RELEASE=2
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/greearb/ath10k-ct.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-01-11
-PKG_SOURCE_VERSION:=9fe1df7d4f783b6b0cd1c99d11979e5a6e6fc40b
-PKG_MIRROR_HASH:=4e30e256716611045e930b95eadaa8bfcadd5bdd8bbe3869cfe0f377920e812b
+PKG_SOURCE_DATE:=2021-09-22
+PKG_SOURCE_VERSION:=e6a7d5b5b834737cd12e357b5efdc2e42d923bf6
+PKG_MIRROR_HASH:=62a1b97089d3561730656ef73beb3cd77231ec636645115cc1bbb3c6c84a6fe3
 
 # Build the 5.10 ath10k-ct driver version.
 # Probably this should match as closely as

package/kernel/ath10k-ct/patches/164-ath10k-commit-rates-from-mac80211.patch

@@ -1,37 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Tue, 26 Feb 2019 08:06:35 +0100
-Subject: ath10k-ct: apply mac80211 rates to ath10k-ct rate state
-
-The rates from mac80211 have to be copied to the state of ath10k-ct or
-otherwise the ath10k_check_apply_special_rates function overwrites
-them again with some default values. This breaks for example the
-mcast_rate set for a wifi-iface.
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-
---- a/ath10k-5.10/mac.c
-+++ b/ath10k-5.10/mac.c
-@@ -6774,6 +6774,7 @@ static void ath10k_recalculate_mgmt_rate
- 		return;
- 	}
- 
-+	arvif->mgt_rate[def->chan->band] = hw_rate_code;
- 	vdev_param = ar->wmi.vdev_param->mgmt_rate;
- 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
- 					hw_rate_code);
-@@ -7000,6 +7001,7 @@ static void ath10k_bss_info_changed(stru
- 			   "mac vdev %d mcast_rate %x\n",
- 			   arvif->vdev_id, rate);
- 
-+		arvif->mcast_rate[band] = rate;
- 		vdev_param = ar->wmi.vdev_param->mcast_data_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- 						vdev_param, rate);
-@@ -7008,6 +7010,7 @@ static void ath10k_bss_info_changed(stru
- 				    "failed to set mcast rate on vdev %i: %d\n",
- 				    arvif->vdev_id,  ret);
- 
-+		arvif->bcast_rate[band] = rate;
- 		vdev_param = ar->wmi.vdev_param->bcast_data_rate;
- 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
- 						vdev_param, rate);

package/kernel/ath10k-ct/patches/201-ath10k-add-LED-and-GPIO-controlling-support-for-various-chipsets.patch

@@ -210,7 +210,7 @@ v13:
  
  #include "htt.h"
  #include "htc.h"
-@@ -1551,6 +1552,13 @@ struct ath10k {
+@@ -1557,6 +1558,13 @@ struct ath10k {
  	} testmode;
  
  	struct {
@@ -445,7 +445,7 @@ v13:
  {
 --- a/ath10k-5.10/wmi-tlv.c
 +++ b/ath10k-5.10/wmi-tlv.c
-@@ -4585,6 +4585,8 @@ static const struct wmi_ops wmi_tlv_ops
+@@ -4594,6 +4594,8 @@ static const struct wmi_ops wmi_tlv_ops
  	.gen_echo = ath10k_wmi_tlv_op_gen_echo,
  	.gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
  	.gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,

package/kernel/ath10k-ct/patches/202-ath10k-use-tpt-trigger-by-default.patch

@@ -16,7 +16,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
 
 --- a/ath10k-5.10/core.h
 +++ b/ath10k-5.10/core.h
-@@ -1659,6 +1659,10 @@ struct ath10k {
+@@ -1665,6 +1665,10 @@ struct ath10k {
  	u8 csi_data[4096];
  	u16 csi_data_len;
  
@@ -42,7 +42,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	if (ret)
 --- a/ath10k-5.10/mac.c
 +++ b/ath10k-5.10/mac.c
-@@ -11400,7 +11400,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -11405,7 +11405,7 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  
  #ifdef CPTCFG_MAC80211_LEDS

package/kernel/exfat/Makefile

@@ -7,12 +7,12 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=exfat
-PKG_VERSION:=5.10.1
-PKG_RELEASE:=1
+PKG_VERSION:=5.12.3
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/namjaejeon/linux-exfat-oot/tar.gz/$(PKG_VERSION)?
-PKG_HASH:=0ff77dd7d39eb231d00c3c4909b9fad31ebeeb618bd6fa18fce142becc9c1f98
+PKG_HASH:=43889c73af76c466bbc904aff80354a62ecaa24c7b20e354ff735f5949907982
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/linux-exfat-oot-$(PKG_VERSION)
 
 PKG_MAINTAINER:=

package/kernel/linux/modules/netsupport.mk

@@ -721,7 +721,7 @@ $(eval $(call KernelPackage,mppe))
 
 
 SCHED_MODULES = $(patsubst $(LINUX_DIR)/net/sched/%.ko,%,$(wildcard $(LINUX_DIR)/net/sched/*.ko))
-SCHED_MODULES_CORE = sch_ingress sch_fq_codel sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_tcindex cls_u32 em_u32 act_mirred act_skbedit cls_matchall
+SCHED_MODULES_CORE = sch_ingress sch_fq_codel sch_hfsc sch_htb sch_tbf cls_basic cls_fw cls_route cls_flow cls_tcindex cls_u32 em_u32 act_gact act_mirred act_skbedit cls_matchall
 SCHED_MODULES_FILTER = $(SCHED_MODULES_CORE) act_connmark act_ctinfo sch_cake sch_netem sch_mqprio em_ipset cls_bpf cls_flower act_bpf act_vlan
 SCHED_MODULES_EXTRA = $(filter-out $(SCHED_MODULES_FILTER),$(SCHED_MODULES))
 SCHED_FILES = $(patsubst %,$(LINUX_DIR)/net/sched/%.ko,$(filter $(SCHED_MODULES_CORE),$(SCHED_MODULES)))
@@ -745,6 +745,7 @@ define KernelPackage/sched-core
 	CONFIG_NET_CLS_ROUTE4 \
 	CONFIG_NET_CLS_TCINDEX \
 	CONFIG_NET_CLS_U32 \
+	CONFIG_NET_ACT_GACT \
 	CONFIG_NET_ACT_MIRRED \
 	CONFIG_NET_ACT_SKBEDIT \
 	CONFIG_NET_CLS_MATCHALL \
@@ -899,7 +900,6 @@ define KernelPackage/sched
 	CONFIG_NET_SCH_FQ \
 	CONFIG_NET_SCH_PIE \
 	CONFIG_NET_ACT_POLICE \
-	CONFIG_NET_ACT_GACT \
 	CONFIG_NET_ACT_IPT \
 	CONFIG_NET_ACT_PEDIT \
 	CONFIG_NET_ACT_SIMP \

package/kernel/mac80211/Makefile

@@ -10,10 +10,10 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=5.10.42-1
+PKG_VERSION:=5.10.68-1
 PKG_RELEASE:=1
-PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.10.42/
-PKG_HASH:=6876520105240844fdb32d1dcdf2bfdea291a37a96f16c892fda3776ba714fcb
+PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.10.68/
+PKG_HASH:=bba161b0084590c677a84b80993709e388a3c478f29ed0c475d4fce1b9162968
 
 PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -907,10 +907,8 @@ drv_mac80211_setup() {
 		return 1
 	}
 
-	[ -z "$(uci -q -P /var/state show wireless._${phy})" ] && {
-		uci -q -P /var/state set wireless._${phy}=phy
-		wireless_set_data phy="$phy"
-	}
+	wireless_set_data phy="$phy"
+	[ -z "$(uci -q -P /var/state show wireless._${phy})" ] && uci -q -P /var/state set wireless._${phy}=phy
 
 	OLDAPLIST=$(uci -q -P /var/state get wireless._${phy}.aplist)
 	OLDSPLIST=$(uci -q -P /var/state get wireless._${phy}.splist)
@@ -1003,6 +1001,7 @@ drv_mac80211_setup() {
 	[ -n "$hostapd_ctrl" ] && {
 		local no_reload=1
 		if [ -n "$(ubus list | grep hostapd.$primary_ap)" ]; then
+			no_reload=0
 			[ "${NEW_MD5}" = "${OLD_MD5}" ] || {
 				ubus call hostapd.$primary_ap reload
 				no_reload=$?
@@ -1077,6 +1076,10 @@ drv_mac80211_teardown() {
 	json_select data
 	json_get_vars phy
 	json_select ..
+	[ -n "$phy" ] || {
+		echo "Bug: PHY is undefined for device '$1'"
+		return 1
+	}
 
 	mac80211_interface_cleanup "$phy"
 	uci -q -P /var/state revert wireless._${phy}

package/kernel/mac80211/patches/ath/356-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch

@@ -8,7 +8,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
 
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -2977,7 +2977,8 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2979,7 +2979,8 @@ void ath9k_hw_apply_txpower(struct ath_h
  {
  	struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
  	struct ieee80211_channel *channel;
@@ -18,7 +18,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
  	u16 ctl = NO_CTL;
  
  	if (!chan)
-@@ -2989,9 +2990,14 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2991,9 +2992,14 @@ void ath9k_hw_apply_txpower(struct ath_h
  	channel = chan->chan;
  	chan_pwr = min_t(int, channel->max_power * 2, MAX_COMBINED_POWER);
  	new_pwr = min_t(int, chan_pwr, reg->power_limit);

package/kernel/mac80211/patches/ath/365-ath9k-adjust-tx-power-reduction-for-US-regulatory-do.patch

@@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -2996,6 +2996,10 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2998,6 +2998,10 @@ void ath9k_hw_apply_txpower(struct ath_h
  	if (ant_gain > max_gain)
  		ant_reduction = ant_gain - max_gain;
  

package/kernel/mac80211/patches/ath/400-ath_move_debug_code.patch

@@ -14,7 +14,7 @@
  CFLAGS_trace.o := -I$(src)
 --- a/drivers/net/wireless/ath/ath.h
 +++ b/drivers/net/wireless/ath/ath.h
-@@ -316,14 +316,7 @@ void _ath_dbg(struct ath_common *common,
+@@ -317,14 +317,7 @@ void _ath_dbg(struct ath_common *common,
  #endif /* CPTCFG_ATH_DEBUG */
  
  /** Returns string describing opmode, or NULL if unknown mode. */

package/kernel/mac80211/patches/ath/542-ath9k_debugfs_diag.patch

@@ -84,7 +84,7 @@
  	bool reset_power_on;
  	bool htc_reset_init;
  
-@@ -1076,6 +1084,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
+@@ -1077,6 +1085,7 @@ void ath9k_hw_check_nav(struct ath_hw *a
  bool ath9k_hw_check_alive(struct ath_hw *ah);
  
  bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
@@ -94,7 +94,7 @@
  struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1883,6 +1883,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
+@@ -1882,6 +1882,20 @@ u32 ath9k_hw_get_tsf_offset(struct times
  }
  EXPORT_SYMBOL(ath9k_hw_get_tsf_offset);
  
@@ -115,7 +115,7 @@
  int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
  		   struct ath9k_hw_cal_data *caldata, bool fastcc)
  {
-@@ -2091,6 +2105,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -2090,6 +2104,7 @@ int ath9k_hw_reset(struct ath_hw *ah, st
  		ar9003_hw_disable_phy_restart(ah);
  
  	ath9k_hw_apply_gpio_override(ah);
@@ -125,7 +125,7 @@
  		REG_SET_BIT(ah, AR_BTCOEX_WL_LNADIV, AR_BTCOEX_WL_LNADIV_FORCE_ON);
 --- a/drivers/net/wireless/ath/ath9k/main.c
 +++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -531,6 +531,11 @@ irqreturn_t ath_isr(int irq, void *dev)
+@@ -536,6 +536,11 @@ irqreturn_t ath_isr(int irq, void *dev)
  	if (test_bit(ATH_OP_HW_RESET, &common->op_flags))
  		return IRQ_HANDLED;
  

package/kernel/mac80211/patches/ath/544-ath9k-ar933x-usb-hang-workaround.patch

@@ -40,7 +40,7 @@
  	return true;
  }
  
-@@ -1861,8 +1880,14 @@ static int ath9k_hw_do_fastcc(struct ath
+@@ -1860,8 +1879,14 @@ static int ath9k_hw_do_fastcc(struct ath
  	if (AR_SREV_9271(ah))
  		ar9002_hw_load_ani_reg(ah, chan);
  
@@ -55,7 +55,7 @@
  	return -EINVAL;
  }
  
-@@ -2116,6 +2141,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -2115,6 +2140,9 @@ int ath9k_hw_reset(struct ath_hw *ah, st
  		ath9k_hw_set_radar_params(ah);
  	}
  

package/kernel/mac80211/patches/ath/551-ath9k_ubnt_uap_plus_hsr.patch

@@ -339,7 +339,7 @@
  
  static void ath9k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
  			u32 queues, bool drop);
-@@ -652,6 +653,7 @@ void ath_reset_work(struct work_struct *
+@@ -657,6 +658,7 @@ void ath_reset_work(struct work_struct *
  static int ath9k_start(struct ieee80211_hw *hw)
  {
  	struct ath_softc *sc = hw->priv;
@@ -347,7 +347,7 @@
  	struct ath_hw *ah = sc->sc_ah;
  	struct ath_common *common = ath9k_hw_common(ah);
  	struct ieee80211_channel *curchan = sc->cur_chan->chandef.chan;
-@@ -730,6 +732,11 @@ static int ath9k_start(struct ieee80211_
+@@ -735,6 +737,11 @@ static int ath9k_start(struct ieee80211_
  					  AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
  	}
  

package/kernel/mac80211/patches/ath/930-ath10k_add_tpt_led_trigger.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -9708,6 +9708,21 @@ static int ath10k_mac_init_rd(struct ath
+@@ -9709,6 +9709,21 @@ static int ath10k_mac_init_rd(struct ath
  	return 0;
  }
  
@@ -22,7 +22,7 @@
  int ath10k_mac_register(struct ath10k *ar)
  {
  	static const u32 cipher_suites[] = {
-@@ -10057,6 +10072,12 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10058,6 +10073,12 @@ int ath10k_mac_register(struct ath10k *a
  
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  

package/kernel/mac80211/patches/ath/975-ath10k-use-tpt-trigger-by-default.patch

@@ -42,7 +42,7 @@ Signed-off-by: Mathias Kresin <dev@kresin.me>
  	if (ret)
 --- a/drivers/net/wireless/ath/ath10k/mac.c
 +++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -10074,7 +10074,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -10075,7 +10075,7 @@ int ath10k_mac_register(struct ath10k *a
  	ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER;
  
  #ifdef CPTCFG_MAC80211_LEDS

package/kernel/mac80211/patches/brcm/862-brcmfmac-Disable-power-management.patch

@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2958,6 +2958,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
+@@ -2961,6 +2961,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
  	 * preference in cfg struct to apply this to
  	 * FW later while initializing the dongle
  	 */

package/kernel/mac80211/patches/brcm/998-survey.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2910,6 +2910,63 @@ done:
+@@ -2913,6 +2913,63 @@ done:
  }
  
  static int
@@ -64,7 +64,7 @@
  brcmf_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *ndev,
  			    int idx, u8 *mac, struct station_info *sinfo)
  {
-@@ -3005,6 +3062,7 @@ static s32 brcmf_inform_single_bss(struc
+@@ -3008,6 +3065,7 @@ static s32 brcmf_inform_single_bss(struc
  	struct brcmu_chan ch;
  	u16 channel;
  	u32 freq;
@@ -72,7 +72,7 @@
  	u16 notify_capability;
  	u16 notify_interval;
  	u8 *notify_ie;
-@@ -3029,6 +3087,17 @@ static s32 brcmf_inform_single_bss(struc
+@@ -3032,6 +3090,17 @@ static s32 brcmf_inform_single_bss(struc
  		band = NL80211_BAND_5GHZ;
  
  	freq = ieee80211_channel_to_frequency(channel, band);
@@ -90,7 +90,7 @@
  	bss_data.chan = ieee80211_get_channel(wiphy, freq);
  	bss_data.scan_width = NL80211_BSS_CHAN_WIDTH_20;
  	bss_data.boottime_ns = ktime_to_ns(ktime_get_boottime());
-@@ -5515,6 +5584,7 @@ static struct cfg80211_ops brcmf_cfg8021
+@@ -5518,6 +5587,7 @@ static struct cfg80211_ops brcmf_cfg8021
  	.leave_ibss = brcmf_cfg80211_leave_ibss,
  	.get_station = brcmf_cfg80211_get_station,
  	.dump_station = brcmf_cfg80211_dump_station,

package/kernel/mac80211/patches/subsys/010-sync-nl80211_h.patch

@@ -0,0 +1,297 @@
+--- a/include/uapi/linux/nl80211.h
++++ b/include/uapi/linux/nl80211.h
+@@ -655,6 +655,9 @@
+  *	When a security association was established on an 802.1X network using
+  *	fast transition, this event should be followed by an
+  *	%NL80211_CMD_PORT_AUTHORIZED event.
++ *	Following a %NL80211_CMD_ROAM event userspace can issue
++ *	%NL80211_CMD_GET_SCAN in order to obtain the scan information for the
++ *	new BSS the card/driver roamed to.
+  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+  *	userspace that a connection was dropped by the AP or due to other
+  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+@@ -757,7 +760,8 @@
+  *	of any other interfaces, and other interfaces will again take
+  *	precedence when they are used.
+  *
+- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
++ *	(no longer supported).
+  *
+  * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+  *	multicast to unicast conversion. When enabled, all multicast packets
+@@ -1177,6 +1181,10 @@
+  *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+  *	if the recipient acknowledged the frame.
+  *
++ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
++ *	passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
++ *	specify the wiphy index to be applied to.
++ *
+  * @NL80211_CMD_MAX: highest used command number
+  * @__NL80211_CMD_AFTER_LAST: internal use
+  */
+@@ -1407,6 +1415,8 @@ enum nl80211_commands {
+ 
+ 	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+ 
++	NL80211_CMD_SET_SAR_SPECS,
++
+ 	/* add new commands above here */
+ 
+ 	/* used to define NL80211_CMD_MAX below */
+@@ -1750,8 +1760,9 @@ enum nl80211_commands {
+  *	specify just a single bitrate, which is to be used for the beacon.
+  *	The driver must also specify support for this with the extended
+  *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
+- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HT,
++ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT and
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HE.
+  *
+  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+@@ -1955,8 +1966,15 @@ enum nl80211_commands {
+  * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+  *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+  *	to be filled by the FW.
+- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
+- *      this feature.  Currently, only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
+  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+  *      ATTR_HT_CAPABILITY to which attention should be paid.
+  *      Currently, only mac80211 NICs support this feature.
+@@ -2077,7 +2095,8 @@ enum nl80211_commands {
+  *	until the channel switch event.
+  * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+  *	must be blocked on the current channel (before the channel switch
+- *	operation).
++ *	operation). Also included in the channel switch started event if quiet
++ *	was requested by the AP.
+  * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+  *	for the time while performing a channel switch.
+  * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
+@@ -2527,6 +2546,20 @@ enum nl80211_commands {
+  *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+  *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+  *
++ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
++ *	derivation in WPA3-Personal networks which are using SAE authentication.
++ *	This is a u8 attribute that encapsulates one of the values from
++ *	&enum nl80211_sae_pwe_mechanism.
++ *
++ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
++ *	used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
++ *	of %nl80211_sar_attrs which specifies the sar type and related
++ *	sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
++ *
++ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
++ *	disassoc events to indicate that an immediate reconnect to the AP
++ *	is desired.
++ *
+  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
+  * @NL80211_ATTR_MAX: highest attribute number currently defined
+  * @__NL80211_ATTR_AFTER_LAST: internal use
+@@ -3016,6 +3049,14 @@ enum nl80211_attrs {
+ 	NL80211_ATTR_S1G_CAPABILITY,
+ 	NL80211_ATTR_S1G_CAPABILITY_MASK,
+ 
++	NL80211_ATTR_SAE_PWE,
++
++	NL80211_ATTR_RECONNECT_REQUESTED,
++
++	NL80211_ATTR_SAR_SPEC,
++
++	NL80211_ATTR_DISABLE_HE,
++
+ 	/* add attributes here, update the policy in nl80211.c */
+ 
+ 	__NL80211_ATTR_AFTER_LAST,
+@@ -5896,6 +5937,19 @@ enum nl80211_feature_flags {
+  * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+  *	unsolicited broadcast probe response transmission
+  *
++ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
++ *	configuration (AP/mesh) with HE rates.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
++ *      frame protection for all management frames exchanged during the
++ *      negotiation and range measurement procedure.
++ *
+  * @NUM_NL80211_EXT_FEATURES: number of extended features.
+  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+  */
+@@ -5956,6 +6010,10 @@ enum nl80211_ext_feature_index {
+ 	NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+ 	NL80211_EXT_FEATURE_FILS_DISCOVERY,
+ 	NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
++	NL80211_EXT_FEATURE_BEACON_RATE_HE,
++	NL80211_EXT_FEATURE_SECURE_LTF,
++	NL80211_EXT_FEATURE_SECURE_RTT,
++	NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ 
+ 	/* add new features before the definition below */
+ 	NUM_NL80211_EXT_FEATURES,
+@@ -6253,11 +6311,13 @@ struct nl80211_vendor_cmd_info {
+  * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+  * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+  * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
++ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
+  */
+ enum nl80211_tdls_peer_capability {
+ 	NL80211_TDLS_PEER_HT = 1<<0,
+ 	NL80211_TDLS_PEER_VHT = 1<<1,
+ 	NL80211_TDLS_PEER_WMM = 1<<2,
++	NL80211_TDLS_PEER_HE = 1<<3,
+ };
+ 
+ /**
+@@ -6849,6 +6909,9 @@ enum nl80211_peer_measurement_ftm_capa {
+  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+  *	ranging will be used.
++ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
++ *	valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
++ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+  *
+  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
+  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
+@@ -6867,6 +6930,7 @@ enum nl80211_peer_measurement_ftm_req {
+ 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+ 	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
+ 	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
++	NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
+ 
+ 	/* keep last */
+ 	NUM_NL80211_PMSR_FTM_REQ_ATTR,
+@@ -7124,4 +7188,115 @@ enum nl80211_unsol_bcast_probe_resp_attr
+ 	NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+ 		__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+ };
++
++/**
++ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
++ *	derivation. Applicable only when WPA3-Personal SAE authentication is
++ *	used.
++ *
++ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
++ *	attribute is not present from userspace.
++ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
++ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
++ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
++ *	can be used.
++ */
++enum nl80211_sae_pwe_mechanism {
++	NL80211_SAE_PWE_UNSPECIFIED,
++	NL80211_SAE_PWE_HUNT_AND_PECK,
++	NL80211_SAE_PWE_HASH_TO_ELEMENT,
++	NL80211_SAE_PWE_BOTH,
++};
++
++/**
++ * enum nl80211_sar_type - type of SAR specs
++ *
++ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
++ *
++ */
++enum nl80211_sar_type {
++	NL80211_SAR_TYPE_POWER,
++
++	/* add new type here */
++
++	/* Keep last */
++	NUM_NL80211_SAR_TYPE,
++};
++
++/**
++ * enum nl80211_sar_attrs - Attributes for SAR spec
++ *
++ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
++ *
++ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
++ *	limit specifications. Each specification contains a set
++ *	of %nl80211_sar_specs_attrs.
++ *
++ *	For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
++ *	and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
++ *
++ *	For sar_capa dump, it contains array of
++ *	%NL80211_SAR_ATTR_SPECS_START_FREQ
++ *	and %NL80211_SAR_ATTR_SPECS_END_FREQ.
++ *
++ * @__NL80211_SAR_ATTR_LAST: Internal
++ * @NL80211_SAR_ATTR_MAX: highest sar attribute
++ *
++ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
++ */
++enum nl80211_sar_attrs {
++	__NL80211_SAR_ATTR_INVALID,
++
++	NL80211_SAR_ATTR_TYPE,
++	NL80211_SAR_ATTR_SPECS,
++
++	__NL80211_SAR_ATTR_LAST,
++	NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
++};
++
++/**
++ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
++ *
++ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
++ *	power limit value in units of 0.25 dBm if type is
++ *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
++ *	0 means userspace doesn't have SAR limitation on this associated range.
++ *
++ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
++ *	index of exported freq range table and the associated power limitation
++ *	is applied to this range.
++ *
++ *	Userspace isn't required to set all the ranges advertised by WLAN driver,
++ *	and userspace can skip some certain ranges. These skipped ranges don't
++ *	have SAR limitations, and they are same as setting the
++ *	%NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
++ *	value higher than regulatory allowed value just means SAR power
++ *	limitation is removed, but it's required to set at least one range.
++ *	It's not allowed to set duplicated range in one SET operation.
++ *
++ *	Every SET operation overwrites previous SET operation.
++ *
++ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
++ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
++ */
++enum nl80211_sar_specs_attrs {
++	__NL80211_SAR_ATTR_SPECS_INVALID,
++
++	NL80211_SAR_ATTR_SPECS_POWER,
++	NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
++	NL80211_SAR_ATTR_SPECS_START_FREQ,
++	NL80211_SAR_ATTR_SPECS_END_FREQ,
++
++	__NL80211_SAR_ATTR_SPECS_LAST,
++	NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
++};
++
+ #endif /* __LINUX_NL80211_H */

package/kernel/mac80211/patches/subsys/110-mac80211_keep_keys_on_stop_ap.patch

@@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects
 
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -1288,7 +1288,6 @@ static int ieee80211_stop_ap(struct wiph
+@@ -1307,7 +1307,6 @@ static int ieee80211_stop_ap(struct wiph
  	sdata->vif.bss_conf.ftmr_params = NULL;
  
  	__sta_info_flush(sdata, true);

package/kernel/mac80211/patches/subsys/210-ap_scan.patch

@@ -1,6 +1,6 @@
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -2444,7 +2444,7 @@ static int ieee80211_scan(struct wiphy *
+@@ -2463,7 +2463,7 @@ static int ieee80211_scan(struct wiphy *
  		 * the  frames sent while scanning on other channel will be
  		 * lost)
  		 */

package/kernel/mac80211/patches/subsys/300-cfg80211-support-immediate-reconnect-request-hint.patch

@@ -31,31 +31,9 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  /**
   * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame
---- a/include/uapi/linux/nl80211.h
-+++ b/include/uapi/linux/nl80211.h
-@@ -2527,6 +2527,10 @@ enum nl80211_commands {
-  *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
-  *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
-  *
-+ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
-+ *	disassoc events to indicate that an immediate reconnect to the AP
-+ *	is desired.
-+ *
-  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
-  * @NL80211_ATTR_MAX: highest attribute number currently defined
-  * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -3016,6 +3020,8 @@ enum nl80211_attrs {
- 	NL80211_ATTR_S1G_CAPABILITY,
- 	NL80211_ATTR_S1G_CAPABILITY_MASK,
- 
-+	NL80211_ATTR_RECONNECT_REQUESTED,
-+
- 	/* add attributes here, update the policy in nl80211.c */
- 
- 	__NL80211_ATTR_AFTER_LAST,
 --- a/net/mac80211/mlme.c
 +++ b/net/mac80211/mlme.c
-@@ -2734,7 +2734,7 @@ static void ieee80211_report_disconnect(
+@@ -2725,7 +2725,7 @@ static void ieee80211_report_disconnect(
  	};
  
  	if (tx)
@@ -64,7 +42,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	else
  		cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
  
-@@ -4724,7 +4724,8 @@ void ieee80211_mgd_quiesce(struct ieee80
+@@ -4719,7 +4719,8 @@ void ieee80211_mgd_quiesce(struct ieee80
  		if (ifmgd->auth_data)
  			ieee80211_destroy_auth_data(sdata, false);
  		cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
@@ -174,7 +152,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  };
  
  /* policy for the key attributes */
-@@ -15903,7 +15904,7 @@ static void nl80211_send_mlme_event(stru
+@@ -15902,7 +15903,7 @@ static void nl80211_send_mlme_event(stru
  				    const u8 *buf, size_t len,
  				    enum nl80211_commands cmd, gfp_t gfp,
  				    int uapsd_queues, const u8 *req_ies,
@@ -183,7 +161,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  {
  	struct sk_buff *msg;
  	void *hdr;
-@@ -15925,6 +15926,9 @@ static void nl80211_send_mlme_event(stru
+@@ -15924,6 +15925,9 @@ static void nl80211_send_mlme_event(stru
  	     nla_put(msg, NL80211_ATTR_REQ_IE, req_ies_len, req_ies)))
  		goto nla_put_failure;
  
@@ -193,7 +171,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	if (uapsd_queues >= 0) {
  		struct nlattr *nla_wmm =
  			nla_nest_start_noflag(msg, NL80211_ATTR_STA_WME);
-@@ -15953,7 +15957,8 @@ void nl80211_send_rx_auth(struct cfg8021
+@@ -15952,7 +15956,8 @@ void nl80211_send_rx_auth(struct cfg8021
  			  size_t len, gfp_t gfp)
  {
  	nl80211_send_mlme_event(rdev, netdev, buf, len,
@@ -203,7 +181,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
-@@ -15963,23 +15968,25 @@ void nl80211_send_rx_assoc(struct cfg802
+@@ -15962,23 +15967,25 @@ void nl80211_send_rx_assoc(struct cfg802
  {
  	nl80211_send_mlme_event(rdev, netdev, buf, len,
  				NL80211_CMD_ASSOCIATE, gfp, uapsd_queues,
@@ -234,7 +212,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev, const u8 *buf,
-@@ -16010,7 +16017,7 @@ void cfg80211_rx_unprot_mlme_mgmt(struct
+@@ -16009,7 +16016,7 @@ void cfg80211_rx_unprot_mlme_mgmt(struct
  
  	trace_cfg80211_rx_unprot_mlme_mgmt(dev, buf, len);
  	nl80211_send_mlme_event(rdev, dev, buf, len, cmd, GFP_ATOMIC, -1,

package/kernel/mac80211/patches/subsys/301-mac80211-support-driver-based-disconnect-with-reconn.patch

@@ -47,7 +47,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	struct ieee80211_mgd_auth_data *auth_data;
 --- a/net/mac80211/mlme.c
 +++ b/net/mac80211/mlme.c
-@@ -2725,7 +2725,7 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get)
+@@ -2716,7 +2716,7 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get)
  
  static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
  					const u8 *buf, size_t len, bool tx,
@@ -56,7 +56,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  {
  	struct ieee80211_event event = {
  		.type = MLME_EVENT,
-@@ -2734,7 +2734,7 @@ static void ieee80211_report_disconnect(
+@@ -2725,7 +2725,7 @@ static void ieee80211_report_disconnect(
  	};
  
  	if (tx)
@@ -65,7 +65,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	else
  		cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
  
-@@ -2756,13 +2756,18 @@ static void __ieee80211_disconnect(struc
+@@ -2747,13 +2747,18 @@ static void __ieee80211_disconnect(struc
  
  	tx = !sdata->csa_block_tx;
  
@@ -89,7 +89,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  			       tx, frame_buf);
  	mutex_lock(&local->mtx);
  	sdata->vif.csa_active = false;
-@@ -2775,7 +2780,9 @@ static void __ieee80211_disconnect(struc
+@@ -2766,7 +2771,9 @@ static void __ieee80211_disconnect(struc
  	mutex_unlock(&local->mtx);
  
  	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
@@ -100,7 +100,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  	sdata_unlock(sdata);
  }
-@@ -2794,6 +2801,13 @@ static void ieee80211_beacon_connection_
+@@ -2785,6 +2792,13 @@ static void ieee80211_beacon_connection_
  		sdata_info(sdata, "Connection to AP %pM lost\n",
  			   ifmgd->bssid);
  		__ieee80211_disconnect(sdata);
@@ -114,7 +114,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	} else {
  		ieee80211_mgd_probe_ap(sdata, true);
  	}
-@@ -2832,6 +2846,21 @@ void ieee80211_connection_loss(struct ie
+@@ -2823,6 +2837,21 @@ void ieee80211_connection_loss(struct ie
  }
  EXPORT_SYMBOL(ieee80211_connection_loss);
  
@@ -136,7 +136,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
  					bool assoc)
-@@ -3135,7 +3164,7 @@ static void ieee80211_rx_mgmt_deauth(str
+@@ -3126,7 +3155,7 @@ static void ieee80211_rx_mgmt_deauth(str
  		ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
  
  		ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
@@ -145,7 +145,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return;
  	}
  
-@@ -3184,7 +3213,8 @@ static void ieee80211_rx_mgmt_disassoc(s
+@@ -3175,7 +3204,8 @@ static void ieee80211_rx_mgmt_disassoc(s
  
  	ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
  
@@ -155,7 +155,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
-@@ -4204,7 +4234,8 @@ static void ieee80211_rx_mgmt_beacon(str
+@@ -4199,7 +4229,8 @@ static void ieee80211_rx_mgmt_beacon(str
  				       true, deauth_buf);
  		ieee80211_report_disconnect(sdata, deauth_buf,
  					    sizeof(deauth_buf), true,
@@ -165,7 +165,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return;
  	}
  
-@@ -4349,7 +4380,7 @@ static void ieee80211_sta_connection_los
+@@ -4344,7 +4375,7 @@ static void ieee80211_sta_connection_los
  			       tx, frame_buf);
  
  	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
@@ -174,7 +174,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  }
  
  static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
-@@ -5439,7 +5470,8 @@ int ieee80211_mgd_auth(struct ieee80211_
+@@ -5434,7 +5465,8 @@ int ieee80211_mgd_auth(struct ieee80211_
  
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -184,7 +184,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	}
  
  	sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
-@@ -5511,7 +5543,8 @@ int ieee80211_mgd_assoc(struct ieee80211
+@@ -5506,7 +5538,8 @@ int ieee80211_mgd_assoc(struct ieee80211
  
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -194,7 +194,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	}
  
  	if (ifmgd->auth_data && !ifmgd->auth_data->done) {
-@@ -5810,7 +5843,7 @@ int ieee80211_mgd_deauth(struct ieee8021
+@@ -5809,7 +5842,7 @@ int ieee80211_mgd_deauth(struct ieee8021
  		ieee80211_destroy_auth_data(sdata, false);
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -203,7 +203,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  
  		return 0;
  	}
-@@ -5830,7 +5863,7 @@ int ieee80211_mgd_deauth(struct ieee8021
+@@ -5829,7 +5862,7 @@ int ieee80211_mgd_deauth(struct ieee8021
  		ieee80211_destroy_assoc_data(sdata, false, true);
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -212,7 +212,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return 0;
  	}
  
-@@ -5845,7 +5878,7 @@ int ieee80211_mgd_deauth(struct ieee8021
+@@ -5844,7 +5877,7 @@ int ieee80211_mgd_deauth(struct ieee8021
  				       req->reason_code, tx, frame_buf);
  		ieee80211_report_disconnect(sdata, frame_buf,
  					    sizeof(frame_buf), true,
@@ -221,7 +221,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  		return 0;
  	}
  
-@@ -5878,7 +5911,7 @@ int ieee80211_mgd_disassoc(struct ieee80
+@@ -5877,7 +5910,7 @@ int ieee80211_mgd_disassoc(struct ieee80
  			       frame_buf);
  
  	ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,

package/kernel/mac80211/patches/subsys/302-cfg80211-Add-support-to-configure-SAE-PWE-value-to-d.patch

@@ -0,0 +1,74 @@
+From: Rohan Dutta <drohan@codeaurora.org>
+Date: Tue, 27 Oct 2020 12:09:10 +0200
+Subject: [PATCH] cfg80211: Add support to configure SAE PWE value to drivers
+
+Add support to configure SAE PWE preference from userspace to drivers in
+both AP and STA modes. This is needed for cases where the driver takes
+care of Authentication frame processing (SME in the driver) so that
+correct enforcement of the acceptable PWE derivation mechanism can be
+performed.
+
+The userspace applications can pass the sae_pwe value using the
+NL80211_ATTR_SAE_PWE attribute in the NL80211_CMD_CONNECT and
+NL80211_CMD_START_AP commands to the driver. This allows selection
+between the hunting-and-pecking loop and hash-to-element options for PWE
+derivation. For backwards compatibility, this new attribute is optional
+and if not included, the driver is notified of the value being
+unspecified.
+
+Signed-off-by: Rohan Dutta <drohan@codeaurora.org>
+Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
+Link: https://lore.kernel.org/r/20201027100910.22283-1-jouni@codeaurora.org
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/include/net/cfg80211.h
++++ b/include/net/cfg80211.h
+@@ -1009,6 +1009,14 @@ struct survey_info {
+  * @sae_pwd: password for SAE authentication (for devices supporting SAE
+  *	offload)
+  * @sae_pwd_len: length of SAE password (for devices supporting SAE offload)
++ * @sae_pwe: The mechanisms allowed for SAE PWE derivation
++ *	NL80211_SAE_PWE_UNSPECIFIED: Not-specified, used to indicate userspace
++ *		did not specify any preference. The driver should follow its
++ *		internal policy in such a scenario.
++ *	NL80211_SAE_PWE_HUNT_AND_PECK: Allow hunting-and-pecking loop only
++ *	NL80211_SAE_PWE_HASH_TO_ELEMENT: Allow hash-to-element only
++ *	NL80211_SAE_PWE_BOTH: Allow either hunting-and-pecking loop
++ *		or hash-to-element
+  */
+ struct cfg80211_crypto_settings {
+ 	u32 wpa_versions;
+@@ -1027,6 +1035,7 @@ struct cfg80211_crypto_settings {
+ 	const u8 *psk;
+ 	const u8 *sae_pwd;
+ 	u8 sae_pwd_len;
++	enum nl80211_sae_pwe_mechanism sae_pwe;
+ };
+ 
+ /**
+--- a/net/wireless/nl80211.c
++++ b/net/wireless/nl80211.c
+@@ -736,6 +736,9 @@ static const struct nla_policy nl80211_p
+ 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
+ 	[NL80211_ATTR_S1G_CAPABILITY_MASK] =
+ 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
++	[NL80211_ATTR_SAE_PWE] =
++		NLA_POLICY_RANGE(NLA_U8, NL80211_SAE_PWE_HUNT_AND_PECK,
++				 NL80211_SAE_PWE_BOTH),
+ 	[NL80211_ATTR_RECONNECT_REQUESTED] = { .type = NLA_REJECT },
+ };
+ 
+@@ -9763,6 +9766,12 @@ static int nl80211_crypto_settings(struc
+ 			nla_len(info->attrs[NL80211_ATTR_SAE_PASSWORD]);
+ 	}
+ 
++	if (info->attrs[NL80211_ATTR_SAE_PWE])
++		settings->sae_pwe =
++			nla_get_u8(info->attrs[NL80211_ATTR_SAE_PWE]);
++	else
++		settings->sae_pwe = NL80211_SAE_PWE_UNSPECIFIED;
++
+ 	return 0;
+ }
+ 

package/kernel/mac80211/patches/subsys/311-net-fq_impl-drop-get_default_func-move-default-flow-.patch

@@ -132,7 +132,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	codel_vars_init(&txqi->def_cvars);
  	codel_stats_init(&txqi->cstats);
  	__skb_queue_head_init(&txqi->frags);
-@@ -3310,8 +3297,7 @@ static bool ieee80211_amsdu_aggregate(st
+@@ -3332,8 +3319,7 @@ static bool ieee80211_amsdu_aggregate(st
  	 */
  
  	tin = &txqi->tin;

package/kernel/mac80211/patches/subsys/312-net-fq_impl-do-not-maintain-a-backlog-sorted-list-of.patch

@@ -306,7 +306,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  #endif
 --- a/net/mac80211/tx.c
 +++ b/net/mac80211/tx.c
-@@ -3364,8 +3364,6 @@ out_recalc:
+@@ -3386,8 +3386,6 @@ out_recalc:
  	if (head->len != orig_len) {
  		flow->backlog += head->len - orig_len;
  		tin->backlog_bytes += head->len - orig_len;

package/kernel/mac80211/patches/subsys/315-mac80211-add-rx-decapsulation-offload-support.patch

@@ -132,7 +132,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  #endif /* __MAC80211_DRIVER_OPS */
 --- a/net/mac80211/iface.c
 +++ b/net/mac80211/iface.c
-@@ -835,7 +835,7 @@ static const struct net_device_ops ieee8
+@@ -856,7 +856,7 @@ static const struct net_device_ops ieee8
  
  };
  
@@ -141,7 +141,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  {
  	switch (iftype) {
  	/* P2P GO and client are mapped to AP/STATION types */
-@@ -855,7 +855,7 @@ static bool ieee80211_set_sdata_offload_
+@@ -876,7 +876,7 @@ static bool ieee80211_set_sdata_offload_
  	flags = sdata->vif.offload_flags;
  
  	if (ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) &&
@@ -150,7 +150,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  		flags |= IEEE80211_OFFLOAD_ENCAP_ENABLED;
  
  		if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_FRAG) &&
-@@ -868,10 +868,21 @@ static bool ieee80211_set_sdata_offload_
+@@ -889,10 +889,21 @@ static bool ieee80211_set_sdata_offload_
  		flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED;
  	}
  
@@ -172,7 +172,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	return true;
  }
  
-@@ -889,7 +900,7 @@ static void ieee80211_set_vif_encap_ops(
+@@ -910,7 +921,7 @@ static void ieee80211_set_vif_encap_ops(
  	}
  
  	if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) ||
@@ -183,7 +183,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	enabled = bss->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_ENABLED;
 --- a/net/mac80211/rx.c
 +++ b/net/mac80211/rx.c
-@@ -4198,7 +4198,9 @@ void ieee80211_check_fast_rx(struct sta_
+@@ -4195,7 +4195,9 @@ void ieee80211_check_fast_rx(struct sta_
  		.vif_type = sdata->vif.type,
  		.control_port_protocol = sdata->control_port_protocol,
  	}, *old, *new = NULL;
@@ -193,7 +193,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
  	/* use sparse to check that we don't return without updating */
  	__acquire(check_fast_rx);
-@@ -4311,6 +4313,17 @@ void ieee80211_check_fast_rx(struct sta_
+@@ -4308,6 +4310,17 @@ void ieee80211_check_fast_rx(struct sta_
  	if (assign)
  		new = kmemdup(&fastrx, sizeof(fastrx), GFP_KERNEL);
  
@@ -211,7 +211,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	spin_lock_bh(&sta->lock);
  	old = rcu_dereference_protected(sta->fast_rx, true);
  	rcu_assign_pointer(sta->fast_rx, new);
-@@ -4357,6 +4370,108 @@ void ieee80211_check_fast_rx_iface(struc
+@@ -4354,6 +4367,108 @@ void ieee80211_check_fast_rx_iface(struc
  	mutex_unlock(&local->sta_mtx);
  }
  
@@ -320,7 +320,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  static bool ieee80211_invoke_fast_rx(struct ieee80211_rx_data *rx,
  				     struct ieee80211_fast_rx *fast_rx)
  {
-@@ -4377,9 +4492,6 @@ static bool ieee80211_invoke_fast_rx(str
+@@ -4374,9 +4489,6 @@ static bool ieee80211_invoke_fast_rx(str
  	} addrs __aligned(2);
  	struct ieee80211_sta_rx_stats *stats = &sta->rx_stats;
  
@@ -330,7 +330,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	/* for parallel-rx, we need to have DUP_VALIDATED, otherwise we write
  	 * to a common data structure; drivers can implement that per queue
  	 * but we don't have that information in mac80211
-@@ -4453,32 +4565,6 @@ static bool ieee80211_invoke_fast_rx(str
+@@ -4450,32 +4562,6 @@ static bool ieee80211_invoke_fast_rx(str
  	    pskb_trim(skb, skb->len - fast_rx->icv_len))
  		goto drop;
  
@@ -363,7 +363,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (rx->key && !ieee80211_has_protected(hdr->frame_control))
  		goto drop;
  
-@@ -4490,12 +4576,6 @@ static bool ieee80211_invoke_fast_rx(str
+@@ -4487,12 +4573,6 @@ static bool ieee80211_invoke_fast_rx(str
  		return true;
  	}
  
@@ -376,7 +376,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	/* do the header conversion - first grab the addresses */
  	ether_addr_copy(addrs.da, skb->data + fast_rx->da_offs);
  	ether_addr_copy(addrs.sa, skb->data + fast_rx->sa_offs);
-@@ -4504,62 +4584,14 @@ static bool ieee80211_invoke_fast_rx(str
+@@ -4501,62 +4581,14 @@ static bool ieee80211_invoke_fast_rx(str
  	/* push the addresses in front */
  	memcpy(skb_push(skb, sizeof(addrs)), &addrs, sizeof(addrs));
  
@@ -443,7 +443,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	stats->dropped++;
  	return true;
  }
-@@ -4613,6 +4645,47 @@ static bool ieee80211_prepare_and_rx_han
+@@ -4610,6 +4642,47 @@ static bool ieee80211_prepare_and_rx_han
  	return true;
  }
  
@@ -491,7 +491,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  /*
   * This is the actual Rx frames handler. as it belongs to Rx path it must
   * be called with rcu_read_lock protection.
-@@ -4850,15 +4923,20 @@ void ieee80211_rx_list(struct ieee80211_
+@@ -4847,15 +4920,20 @@ void ieee80211_rx_list(struct ieee80211_
  	 * if it was previously present.
  	 * Also, frames with less than 16 bytes are dropped.
  	 */

package/kernel/mac80211/patches/subsys/316-mac80211-enable-QoS-support-for-nl80211-ctrl-port.patch

@@ -0,0 +1,116 @@
+From: Markus Theil <markus.theil@tu-ilmenau.de>
+Date: Sat, 6 Feb 2021 12:51:12 +0100
+Subject: [PATCH] mac80211: enable QoS support for nl80211 ctrl port
+
+This patch unifies sending control port frames
+over nl80211 and AF_PACKET sockets a little more.
+
+Before this patch, EAPOL frames got QoS prioritization
+only when using AF_PACKET sockets.
+
+__ieee80211_select_queue only selects a QoS-enabled queue
+for control port frames, when the control port protocol
+is set correctly on the skb. For the AF_PACKET path this
+works, but the nl80211 path used ETH_P_802_3.
+
+Another check for injected frames in wme.c then prevented
+the QoS TID to be copied in the frame.
+
+In order to fix this, get rid of the frame injection marking
+for nl80211 ctrl port and set the correct ethernet protocol.
+
+Please note:
+An erlier version of this path tried to prevent
+frame aggregation for control port frames in order to speed up
+the initial connection setup a little. This seemed to cause
+issues on my older Intel dvm-based hardware, and was therefore
+removed again. Future commits which try to reintroduce this
+have to check carefully how hw behaves with aggregated and
+non-aggregated traffic for the same TID.
+My NIC: Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
+
+Reported-by: kernel test robot <lkp@intel.com>
+Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
+Link: https://lore.kernel.org/r/20210206115112.567881-1-markus.theil@tu-ilmenau.de
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+
+--- a/net/mac80211/status.c
++++ b/net/mac80211/status.c
+@@ -628,16 +628,12 @@ static void ieee80211_report_ack_skb(str
+ 		u64 cookie = IEEE80211_SKB_CB(skb)->ack.cookie;
+ 		struct ieee80211_sub_if_data *sdata;
+ 		struct ieee80211_hdr *hdr = (void *)skb->data;
+-		__be16 ethertype = 0;
+-
+-		if (skb->len >= ETH_HLEN && skb->protocol == cpu_to_be16(ETH_P_802_3))
+-			skb_copy_bits(skb, 2 * ETH_ALEN, &ethertype, ETH_TLEN);
+ 
+ 		rcu_read_lock();
+ 		sdata = ieee80211_sdata_from_skb(local, skb);
+ 		if (sdata) {
+-			if (ethertype == sdata->control_port_protocol ||
+-			    ethertype == cpu_to_be16(ETH_P_PREAUTH))
++			if (skb->protocol == sdata->control_port_protocol ||
++			    skb->protocol == cpu_to_be16(ETH_P_PREAUTH))
+ 				cfg80211_control_port_tx_status(&sdata->wdev,
+ 								cookie,
+ 								skb->data,
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1195,9 +1195,7 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 			tx->sta = rcu_dereference(sdata->u.vlan.sta);
+ 			if (!tx->sta && sdata->wdev.use_4addr)
+ 				return TX_DROP;
+-		} else if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX |
+-					  IEEE80211_TX_CTL_INJECTED) ||
+-			   tx->sdata->control_port_protocol == tx->skb->protocol) {
++		} else if (tx->sdata->control_port_protocol == tx->skb->protocol) {
+ 			tx->sta = sta_info_get_bss(sdata, hdr->addr1);
+ 		}
+ 		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
+@@ -5443,6 +5441,7 @@ int ieee80211_tx_control_port(struct wip
+ {
+ 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ 	struct ieee80211_local *local = sdata->local;
++	struct sta_info *sta;
+ 	struct sk_buff *skb;
+ 	struct ethhdr *ehdr;
+ 	u32 ctrl_flags = 0;
+@@ -5465,8 +5464,7 @@ int ieee80211_tx_control_port(struct wip
+ 	if (cookie)
+ 		ctrl_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+ 
+-	flags |= IEEE80211_TX_INTFL_NL80211_FRAME_TX |
+-		 IEEE80211_TX_CTL_INJECTED;
++	flags |= IEEE80211_TX_INTFL_NL80211_FRAME_TX;
+ 
+ 	skb = dev_alloc_skb(local->hw.extra_tx_headroom +
+ 			    sizeof(struct ethhdr) + len);
+@@ -5483,10 +5481,25 @@ int ieee80211_tx_control_port(struct wip
+ 	ehdr->h_proto = proto;
+ 
+ 	skb->dev = dev;
+-	skb->protocol = htons(ETH_P_802_3);
++	skb->protocol = proto;
+ 	skb_reset_network_header(skb);
+ 	skb_reset_mac_header(skb);
+ 
++	/* update QoS header to prioritize control port frames if possible,
++	 * priorization also happens for control port frames send over
++	 * AF_PACKET
++	 */
++	rcu_read_lock();
++
++	if (ieee80211_lookup_ra_sta(sdata, skb, &sta) == 0 && !IS_ERR(sta)) {
++		u16 queue = __ieee80211_select_queue(sdata, sta, skb);
++
++		skb_set_queue_mapping(skb, queue);
++		skb_get_hash(skb);
++	}
++
++	rcu_read_unlock();
++
+ 	/* mutex lock is only needed for incrementing the cookie counter */
+ 	mutex_lock(&local->mtx);
+ 

package/kernel/mac80211/patches/subsys/371-mac80211-don-t-apply-flow-control-on-management-fram.patch

@@ -28,7 +28,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
   *
   * Transmit and frame generation functions.
   */
-@@ -1403,8 +1403,17 @@ static void ieee80211_txq_enqueue(struct
+@@ -1401,8 +1401,17 @@ static void ieee80211_txq_enqueue(struct
  	ieee80211_set_skb_enqueue_time(skb);
  
  	spin_lock_bh(&fq->lock);
@@ -48,7 +48,7 @@ Signed-off-by: Johannes Berg <johannes.berg@intel.com>
  	spin_unlock_bh(&fq->lock);
  }
  
-@@ -3846,6 +3855,9 @@ bool ieee80211_txq_airtime_check(struct
+@@ -3866,6 +3875,9 @@ bool ieee80211_txq_airtime_check(struct
  	if (!txq->sta)
  		return true;
  

package/kernel/mac80211/patches/subsys/372-mac80211-set-sk_pacing_shift-for-802.3-txpath.patch

@@ -9,7 +9,7 @@ Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
 
 --- a/net/mac80211/tx.c
 +++ b/net/mac80211/tx.c
-@@ -4173,6 +4173,9 @@ static bool ieee80211_tx_8023(struct iee
+@@ -4193,6 +4193,9 @@ static bool ieee80211_tx_8023(struct iee
  	unsigned long flags;
  	int q = info->hw_queue;
  

package/kernel/mac80211/patches/subsys/374-mac80211-move-A-MPDU-session-check-from-minstrel_ht-.patch

@@ -0,0 +1,126 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 17 Jun 2021 17:56:54 +0200
+Subject: [PATCH] mac80211: move A-MPDU session check from minstrel_ht to
+ mac80211
+
+This avoids calling back into tx handlers from within the rate control module.
+Preparation for deferring rate control until tx dequeue
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/include/net/mac80211.h
++++ b/include/net/mac80211.h
+@@ -6160,6 +6160,11 @@ enum rate_control_capabilities {
+ 	 * otherwise the NSS difference doesn't bother us.
+ 	 */
+ 	RATE_CTRL_CAPA_VHT_EXT_NSS_BW = BIT(0),
++	/**
++	 * @RATE_CTRL_CAPA_AMPDU_TRIGGER:
++	 * mac80211 should start A-MPDU sessions on tx
++	 */
++	RATE_CTRL_CAPA_AMPDU_TRIGGER = BIT(1),
+ };
+ 
+ struct rate_control_ops {
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -1144,29 +1144,6 @@ minstrel_downgrade_prob_rate(struct mins
+ }
+ 
+ static void
+-minstrel_aggr_check(struct ieee80211_sta *pubsta, struct sk_buff *skb)
+-{
+-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+-	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
+-	u16 tid;
+-
+-	if (skb_get_queue_mapping(skb) == IEEE80211_AC_VO)
+-		return;
+-
+-	if (unlikely(!ieee80211_is_data_qos(hdr->frame_control)))
+-		return;
+-
+-	if (unlikely(skb->protocol == cpu_to_be16(ETH_P_PAE)))
+-		return;
+-
+-	tid = ieee80211_get_tid(hdr);
+-	if (likely(sta->ampdu_mlme.tid_tx[tid]))
+-		return;
+-
+-	ieee80211_start_tx_ba_session(pubsta, tid, 0);
+-}
+-
+-static void
+ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband,
+                       void *priv_sta, struct ieee80211_tx_status *st)
+ {
+@@ -1461,10 +1438,6 @@ minstrel_ht_get_rate(void *priv, struct
+ 	struct minstrel_priv *mp = priv;
+ 	u16 sample_idx;
+ 
+-	if (!(info->flags & IEEE80211_TX_CTL_AMPDU) &&
+-	    !minstrel_ht_is_legacy_group(MI_RATE_GROUP(mi->max_prob_rate)))
+-		minstrel_aggr_check(sta, txrc->skb);
+-
+ 	info->flags |= mi->tx_flags;
+ 
+ #ifdef CPTCFG_MAC80211_DEBUGFS
+@@ -1870,6 +1843,7 @@ static u32 minstrel_ht_get_expected_thro
+ 
+ static const struct rate_control_ops mac80211_minstrel_ht = {
+ 	.name = "minstrel_ht",
++	.capa = RATE_CTRL_CAPA_AMPDU_TRIGGER,
+ 	.tx_status_ext = minstrel_ht_tx_status,
+ 	.get_rate = minstrel_ht_get_rate,
+ 	.rate_init = minstrel_ht_rate_init,
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -3953,6 +3953,29 @@ void ieee80211_txq_schedule_start(struct
+ }
+ EXPORT_SYMBOL(ieee80211_txq_schedule_start);
+ 
++static void
++ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
++		     struct sta_info *sta,
++		     struct sk_buff *skb)
++{
++	struct rate_control_ref *ref = sdata->local->rate_ctrl;
++	u16 tid;
++
++	if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER))
++		return;
++
++	if (!sta || !sta->sta.ht_cap.ht_supported ||
++	    !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO ||
++	    skb->protocol == sdata->control_port_protocol)
++		return;
++
++	tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
++	if (likely(sta->ampdu_mlme.tid_tx[tid]))
++		return;
++
++	ieee80211_start_tx_ba_session(&sta->sta, tid, 0);
++}
++
+ void __ieee80211_subif_start_xmit(struct sk_buff *skb,
+ 				  struct net_device *dev,
+ 				  u32 info_flags,
+@@ -3983,6 +4006,8 @@ void __ieee80211_subif_start_xmit(struct
+ 		skb_get_hash(skb);
+ 	}
+ 
++	ieee80211_aggr_check(sdata, sta, skb);
++
+ 	if (sta) {
+ 		struct ieee80211_fast_tx *fast_tx;
+ 
+@@ -4246,6 +4271,8 @@ static void ieee80211_8023_xmit(struct i
+ 
+ 	memset(info, 0, sizeof(*info));
+ 
++	ieee80211_aggr_check(sdata, sta, skb);
++
+ 	tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+ 	tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
+ 	if (tid_tx) {

package/kernel/mac80211/patches/subsys/375-mac80211-call-ieee80211_tx_h_rate_ctrl-when-dequeue.patch

@@ -0,0 +1,114 @@
+From: Ryder Lee <ryder.lee@mediatek.com>
+Date: Fri, 28 May 2021 14:05:41 +0800
+Subject: [PATCH] mac80211: call ieee80211_tx_h_rate_ctrl() when dequeue
+
+Make ieee80211_tx_h_rate_ctrl() get called on dequeue to improve
+performance since it reduces the turnaround time for rate control.
+
+Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
+---
+
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1778,8 +1778,6 @@ static int invoke_tx_handlers_early(stru
+ 	CALL_TXH(ieee80211_tx_h_ps_buf);
+ 	CALL_TXH(ieee80211_tx_h_check_control_port_protocol);
+ 	CALL_TXH(ieee80211_tx_h_select_key);
+-	if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL))
+-		CALL_TXH(ieee80211_tx_h_rate_ctrl);
+ 
+  txh_done:
+ 	if (unlikely(res == TX_DROP)) {
+@@ -1812,6 +1810,9 @@ static int invoke_tx_handlers_late(struc
+ 		goto txh_done;
+ 	}
+ 
++	if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL))
++		CALL_TXH(ieee80211_tx_h_rate_ctrl);
++
+ 	CALL_TXH(ieee80211_tx_h_michael_mic_add);
+ 	CALL_TXH(ieee80211_tx_h_sequence);
+ 	CALL_TXH(ieee80211_tx_h_fragment);
+@@ -3404,15 +3405,21 @@ out:
+  * Can be called while the sta lock is held. Anything that can cause packets to
+  * be generated will cause deadlock!
+  */
+-static void ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata,
+-				       struct sta_info *sta, u8 pn_offs,
+-				       struct ieee80211_key *key,
+-				       struct sk_buff *skb)
++static ieee80211_tx_result
++ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata,
++			   struct sta_info *sta, u8 pn_offs,
++			   struct ieee80211_key *key,
++			   struct ieee80211_tx_data *tx)
+ {
++	struct sk_buff *skb = tx->skb;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ 	struct ieee80211_hdr *hdr = (void *)skb->data;
+ 	u8 tid = IEEE80211_NUM_TIDS;
+ 
++	if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL) &&
++	    ieee80211_tx_h_rate_ctrl(tx) != TX_CONTINUE)
++		return TX_DROP;
++
+ 	if (key)
+ 		info->control.hw_key = &key->conf;
+ 
+@@ -3461,6 +3468,8 @@ static void ieee80211_xmit_fast_finish(s
+ 			break;
+ 		}
+ 	}
++
++	return TX_CONTINUE;
+ }
+ 
+ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
+@@ -3564,24 +3573,17 @@ static bool ieee80211_xmit_fast(struct i
+ 	tx.sta = sta;
+ 	tx.key = fast_tx->key;
+ 
+-	if (!ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) {
+-		tx.skb = skb;
+-		r = ieee80211_tx_h_rate_ctrl(&tx);
+-		skb = tx.skb;
+-		tx.skb = NULL;
+-
+-		if (r != TX_CONTINUE) {
+-			if (r != TX_QUEUED)
+-				kfree_skb(skb);
+-			return true;
+-		}
+-	}
+-
+ 	if (ieee80211_queue_skb(local, sdata, sta, skb))
+ 		return true;
+ 
+-	ieee80211_xmit_fast_finish(sdata, sta, fast_tx->pn_offs,
+-				   fast_tx->key, skb);
++	tx.skb = skb;
++	r = ieee80211_xmit_fast_finish(sdata, sta, fast_tx->pn_offs,
++				       fast_tx->key, &tx);
++	tx.skb = NULL;
++	if (r == TX_DROP) {
++		kfree_skb(skb);
++		return true;
++	}
+ 
+ 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ 		sdata = container_of(sdata->bss,
+@@ -3692,8 +3694,12 @@ begin:
+ 		    (tx.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+ 			pn_offs = ieee80211_hdrlen(hdr->frame_control);
+ 
+-		ieee80211_xmit_fast_finish(sta->sdata, sta, pn_offs,
+-					   tx.key, skb);
++		r = ieee80211_xmit_fast_finish(sta->sdata, sta, pn_offs,
++					       tx.key, &tx);
++		if (r != TX_CONTINUE) {
++			ieee80211_free_txskb(&local->hw, skb);
++			goto begin;
++		}
+ 	} else {
+ 		if (invoke_tx_handlers_late(&tx))
+ 			goto begin;

package/kernel/mac80211/patches/subsys/376-mac80211-add-rate-control-support-for-encap-offload.patch

@@ -0,0 +1,119 @@
+From: Ryder Lee <ryder.lee@mediatek.com>
+Date: Fri, 28 May 2021 14:05:43 +0800
+Subject: [PATCH] mac80211: add rate control support for encap offload
+
+The software rate control cannot deal with encap offload, so fix it.
+
+Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
+---
+
+--- a/net/mac80211/ieee80211_i.h
++++ b/net/mac80211/ieee80211_i.h
+@@ -2024,6 +2024,15 @@ static inline void ieee80211_tx_skb(stru
+ 	ieee80211_tx_skb_tid(sdata, skb, 7);
+ }
+ 
++static inline bool ieee80211_is_tx_data(struct sk_buff *skb)
++{
++	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
++	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
++
++	return info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP ||
++	       ieee80211_is_data(hdr->frame_control);
++}
++
+ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
+ 			       struct ieee802_11_elems *elems,
+ 			       u64 filter, u32 crc, u8 *transmitter_bssid,
+--- a/net/mac80211/rate.c
++++ b/net/mac80211/rate.c
+@@ -297,15 +297,11 @@ void ieee80211_check_rate_mask(struct ie
+ static bool rc_no_data_or_no_ack_use_min(struct ieee80211_tx_rate_control *txrc)
+ {
+ 	struct sk_buff *skb = txrc->skb;
+-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+-	__le16 fc;
+-
+-	fc = hdr->frame_control;
+ 
+ 	return (info->flags & (IEEE80211_TX_CTL_NO_ACK |
+ 			       IEEE80211_TX_CTL_USE_MINRATE)) ||
+-		!ieee80211_is_data(fc);
++		!ieee80211_is_tx_data(skb);
+ }
+ 
+ static void rc_send_low_basicrate(struct ieee80211_tx_rate *rate,
+@@ -870,7 +866,6 @@ void ieee80211_get_tx_rates(struct ieee8
+ 			    int max_rates)
+ {
+ 	struct ieee80211_sub_if_data *sdata;
+-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ 	struct ieee80211_supported_band *sband;
+ 
+@@ -882,7 +877,7 @@ void ieee80211_get_tx_rates(struct ieee8
+ 	sdata = vif_to_sdata(vif);
+ 	sband = sdata->local->hw.wiphy->bands[info->band];
+ 
+-	if (ieee80211_is_data(hdr->frame_control))
++	if (ieee80211_is_tx_data(skb))
+ 		rate_control_apply_mask(sdata, sta, sband, dest, max_rates);
+ 
+ 	if (dest[0].idx < 0)
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -679,6 +679,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 	u32 len;
+ 	struct ieee80211_tx_rate_control txrc;
+ 	struct ieee80211_sta_rates *ratetbl = NULL;
++	bool encap = info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP;
+ 	bool assoc = false;
+ 
+ 	memset(&txrc, 0, sizeof(txrc));
+@@ -720,7 +721,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 	 * just wants a probe response.
+ 	 */
+ 	if (tx->sdata->vif.bss_conf.use_short_preamble &&
+-	    (ieee80211_is_data(hdr->frame_control) ||
++	    (ieee80211_is_tx_data(tx->skb) ||
+ 	     (tx->sta && test_sta_flag(tx->sta, WLAN_STA_SHORT_PREAMBLE))))
+ 		txrc.short_preamble = true;
+ 
+@@ -742,7 +743,8 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 		 "%s: Dropped data frame as no usable bitrate found while "
+ 		 "scanning and associated. Target station: "
+ 		 "%pM on %d GHz band\n",
+-		 tx->sdata->name, hdr->addr1,
++		 tx->sdata->name,
++		 encap ? ((struct ethhdr *)hdr)->h_dest : hdr->addr1,
+ 		 info->band ? 5 : 2))
+ 		return TX_DROP;
+ 
+@@ -776,7 +778,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ 
+ 	if (txrc.reported_rate.idx < 0) {
+ 		txrc.reported_rate = tx->rate;
+-		if (tx->sta && ieee80211_is_data(hdr->frame_control))
++		if (tx->sta && ieee80211_is_tx_data(tx->skb))
+ 			tx->sta->tx_stats.last_rate = txrc.reported_rate;
+ 	} else if (tx->sta)
+ 		tx->sta->tx_stats.last_rate = txrc.reported_rate;
+@@ -3682,8 +3684,16 @@ begin:
+ 	else
+ 		info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+ 
+-	if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP)
++	if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) {
++		if (!ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) {
++			r = ieee80211_tx_h_rate_ctrl(&tx);
++			if (r != TX_CONTINUE) {
++				ieee80211_free_txskb(&local->hw, skb);
++				goto begin;
++			}
++		}
+ 		goto encap_out;
++	}
+ 
+ 	if (info->control.flags & IEEE80211_TX_CTRL_FAST_XMIT) {
+ 		struct sta_info *sta = container_of(txq->sta, struct sta_info,

package/kernel/mac80211/patches/subsys/377-mac80211-minstrel_ht-fix-sample-time-check.patch

@@ -0,0 +1,23 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 17 Jun 2021 12:05:54 +0200
+Subject: [PATCH] mac80211: minstrel_ht: fix sample time check
+
+We need to skip sampling if the next sample time is after jiffies, not before.
+This patch fixes an issue where in some cases only very little sampling (or none
+at all) is performed, leading to really bad data rates
+
+Fixes: 80d55154b2f8 ("mac80211: minstrel_ht: significantly redesign the rate probing strategy")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/rc80211_minstrel_ht.c
++++ b/net/mac80211/rc80211_minstrel_ht.c
+@@ -1450,7 +1450,7 @@ minstrel_ht_get_rate(void *priv, struct
+ 	    (info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO))
+ 		return;
+ 
+-	if (time_is_before_jiffies(mi->sample_time))
++	if (time_is_after_jiffies(mi->sample_time))
+ 		return;
+ 
+ 	mi->sample_time = jiffies + MINSTREL_SAMPLE_INTERVAL;

package/kernel/mac80211/patches/subsys/379-mac80211-fix-starting-aggregation-sessions-on-mesh-i.patch

@@ -0,0 +1,112 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 29 Jun 2021 13:25:09 +0200
+Subject: [PATCH] mac80211: fix starting aggregation sessions on mesh
+ interfaces
+
+The logic for starting aggregation sessions was recently moved from minstrel_ht
+to mac80211, into the subif tx handler just after the sta lookup.
+Unfortunately this didn't work for mesh interfaces, since the sta lookup is
+deferred until a much later point in time on those.
+Fix this by also calling the aggregation check right after the deferred sta
+lookup.
+
+Fixes: 08a46c642001 ("mac80211: move A-MPDU session check from minstrel_ht to mac80211")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -1159,6 +1159,29 @@ static bool ieee80211_tx_prep_agg(struct
+ 	return queued;
+ }
+ 
++static void
++ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
++		     struct sta_info *sta,
++		     struct sk_buff *skb)
++{
++	struct rate_control_ref *ref = sdata->local->rate_ctrl;
++	u16 tid;
++
++	if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER))
++		return;
++
++	if (!sta || !sta->sta.ht_cap.ht_supported ||
++	    !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO ||
++	    skb->protocol == sdata->control_port_protocol)
++		return;
++
++	tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
++	if (likely(sta->ampdu_mlme.tid_tx[tid]))
++		return;
++
++	ieee80211_start_tx_ba_session(&sta->sta, tid, 0);
++}
++
+ /*
+  * initialises @tx
+  * pass %NULL for the station if unknown, a valid pointer if known
+@@ -1172,6 +1195,7 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 	struct ieee80211_local *local = sdata->local;
+ 	struct ieee80211_hdr *hdr;
+ 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
++	bool aggr_check = false;
+ 	int tid;
+ 
+ 	memset(tx, 0, sizeof(*tx));
+@@ -1200,8 +1224,10 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 		} else if (tx->sdata->control_port_protocol == tx->skb->protocol) {
+ 			tx->sta = sta_info_get_bss(sdata, hdr->addr1);
+ 		}
+-		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1))
++		if (!tx->sta && !is_multicast_ether_addr(hdr->addr1)) {
+ 			tx->sta = sta_info_get(sdata, hdr->addr1);
++			aggr_check = true;
++		}
+ 	}
+ 
+ 	if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) &&
+@@ -1211,8 +1237,12 @@ ieee80211_tx_prepare(struct ieee80211_su
+ 		struct tid_ampdu_tx *tid_tx;
+ 
+ 		tid = ieee80211_get_tid(hdr);
+-
+ 		tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]);
++		if (!tid_tx && aggr_check) {
++			ieee80211_aggr_check(sdata, tx->sta, skb);
++			tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]);
++		}
++
+ 		if (tid_tx) {
+ 			bool queued;
+ 
+@@ -3969,29 +3999,6 @@ void ieee80211_txq_schedule_start(struct
+ }
+ EXPORT_SYMBOL(ieee80211_txq_schedule_start);
+ 
+-static void
+-ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata,
+-		     struct sta_info *sta,
+-		     struct sk_buff *skb)
+-{
+-	struct rate_control_ref *ref = sdata->local->rate_ctrl;
+-	u16 tid;
+-
+-	if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER))
+-		return;
+-
+-	if (!sta || !sta->sta.ht_cap.ht_supported ||
+-	    !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO ||
+-	    skb->protocol == sdata->control_port_protocol)
+-		return;
+-
+-	tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
+-	if (likely(sta->ampdu_mlme.tid_tx[tid]))
+-		return;
+-
+-	ieee80211_start_tx_ba_session(&sta->sta, tid, 0);
+-}
+-
+ void __ieee80211_subif_start_xmit(struct sk_buff *skb,
+ 				  struct net_device *dev,
+ 				  u32 info_flags,

package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch

@@ -1,6 +1,6 @@
 --- a/include/net/cfg80211.h
 +++ b/include/net/cfg80211.h
-@@ -3736,6 +3736,7 @@ struct mgmt_frame_regs {
+@@ -3745,6 +3745,7 @@ struct mgmt_frame_regs {
   *	(as advertised by the nl80211 feature flag.)
   * @get_tx_power: store the current TX power into the dbm variable;
   *	return 0 if successful
@@ -8,7 +8,7 @@
   *
   * @set_wds_peer: set the WDS peer for a WDS interface
   *
-@@ -4058,6 +4059,7 @@ struct cfg80211_ops {
+@@ -4067,6 +4068,7 @@ struct cfg80211_ops {
  				enum nl80211_tx_power_setting type, int mbm);
  	int	(*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
  				int *dbm);
@@ -36,7 +36,7 @@
  	u8 ps_dtim_period;
 --- a/include/uapi/linux/nl80211.h
 +++ b/include/uapi/linux/nl80211.h
-@@ -2531,6 +2531,9 @@ enum nl80211_commands {
+@@ -2560,6 +2560,9 @@ enum nl80211_commands {
   *	disassoc events to indicate that an immediate reconnect to the AP
   *	is desired.
   *
@@ -46,9 +46,9 @@
   * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -3022,6 +3025,8 @@ enum nl80211_attrs {
+@@ -3057,6 +3060,8 @@ enum nl80211_attrs {
  
- 	NL80211_ATTR_RECONNECT_REQUESTED,
+ 	NL80211_ATTR_DISABLE_HE,
  
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 +
@@ -57,7 +57,7 @@
  	__NL80211_ATTR_AFTER_LAST,
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -2709,6 +2709,19 @@ static int ieee80211_get_tx_power(struct
+@@ -2728,6 +2728,19 @@ static int ieee80211_get_tx_power(struct
  	return 0;
  }
  
@@ -77,7 +77,7 @@
  static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
  				  const u8 *addr)
  {
-@@ -4139,6 +4152,7 @@ const struct cfg80211_ops mac80211_confi
+@@ -4158,6 +4171,7 @@ const struct cfg80211_ops mac80211_confi
  	.set_wiphy_params = ieee80211_set_wiphy_params,
  	.set_tx_power = ieee80211_set_tx_power,
  	.get_tx_power = ieee80211_get_tx_power,
@@ -129,15 +129,15 @@
  	local->hw.max_mtu = IEEE80211_MAX_DATA_LEN;
 --- a/net/wireless/nl80211.c
 +++ b/net/wireless/nl80211.c
-@@ -737,6 +737,7 @@ static const struct nla_policy nl80211_p
- 	[NL80211_ATTR_S1G_CAPABILITY_MASK] =
- 		NLA_POLICY_EXACT_LEN(IEEE80211_S1G_CAPABILITY_LEN),
+@@ -740,6 +740,7 @@ static const struct nla_policy nl80211_p
+ 		NLA_POLICY_RANGE(NLA_U8, NL80211_SAE_PWE_HUNT_AND_PECK,
+ 				 NL80211_SAE_PWE_BOTH),
  	[NL80211_ATTR_RECONNECT_REQUESTED] = { .type = NLA_REJECT },
 +	[NL80211_ATTR_WIPHY_ANTENNA_GAIN] = { .type = NLA_U32 },
  };
  
  /* policy for the key attributes */
-@@ -3245,6 +3246,20 @@ static int nl80211_set_wiphy(struct sk_b
+@@ -3248,6 +3249,20 @@ static int nl80211_set_wiphy(struct sk_b
  		if (result)
  			return result;
  	}

package/kernel/mt76/Makefile

@@ -8,9 +8,9 @@ PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/openwrt/mt76
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2021-05-15
-PKG_SOURCE_VERSION:=9d736545bb5ac9707e60b7900b7d6b290492e24d
-PKG_MIRROR_HASH:=8fd98f488579c18cfd8c442cff1796dcd70e2ecbc59c5d5b92ee8c0f06efafcf
+PKG_SOURCE_DATE:=2021-06-06
+PKG_SOURCE_VERSION:=22b690334c0f49b11534cc2e331c9d5e17c4a0bc
+PKG_MIRROR_HASH:=ff5e563935919d2e40c1e7254ef3bc06f7ecc5e69f8ddd12903e8f5de942d630
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_BUILD_PARALLEL:=1
@@ -155,7 +155,7 @@ define KernelPackage/mt7615-common
   $(KernelPackage/mt76-default)
   TITLE:=MediaTek MT7615 wireless driver common code
   HIDDEN:=1
-  DEPENDS+=@PCI_SUPPORT +kmod-mt76-core +kmod-mt76-connac
+  DEPENDS+=@PCI_SUPPORT +kmod-mt76-core +kmod-mt76-connac +kmod-hwmon-core
   FILES:= $(PKG_BUILD_DIR)/mt7615/mt7615-common.ko
 endef
 
@@ -213,7 +213,7 @@ endef
 define KernelPackage/mt7915e
   $(KernelPackage/mt76-default)
   TITLE:=MediaTek MT7915e wireless driver
-  DEPENDS+=@PCI_SUPPORT +kmod-mt7615-common +@DRIVER_11AX_SUPPORT
+  DEPENDS+=@PCI_SUPPORT +kmod-mt7615-common +kmod-hwmon-core +kmod-thermal +@DRIVER_11AX_SUPPORT
   FILES:= $(PKG_BUILD_DIR)/mt7915/mt7915e.ko
   AUTOLOAD:=$(call AutoProbe,mt7915e)
 endef

package/libs/libjson-c/Makefile

@@ -20,7 +20,6 @@ PKG_LICENSE:=MIT
 PKG_LICENSE_FILES:=COPYING
 PKG_CPE_ID:=cpe:/a:json-c_project:json-c
 
-PKG_FLAGS := nonshared
 PKG_BUILD_PARALLEL:=1
 HOST_BUILD_PREFIX:=$(STAGING_DIR_HOST)
 

package/libs/libnl-tiny/Makefile

@@ -17,8 +17,6 @@ PKG_SOURCE_VERSION:=c291088f631d1694f7ba0444b59677b194348da8
 PKG_MIRROR_HASH:=99bcce12701bb34dadb39689d95c2c5cf1e27719d0ecfd645d3957a8947025ac
 CMAKE_INSTALL:=1
 
-PKG_FLAGS := nonshared
-
 PKG_LICENSE:=LGPL-2.1
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/libs/libubox/Makefile

@@ -11,8 +11,6 @@ PKG_SOURCE_VERSION:=b14c4688612c05c78ce984d7bde633bce8703b1e
 PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
 CMAKE_INSTALL:=1
 
-PKG_FLAGS := nonshared
-
 PKG_LICENSE:=ISC
 PKG_LICENSE_FILES:=
 

package/libs/libusb/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libusb
 PKG_VERSION:=1.0.24
-PKG_RELEASE:=1
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=\

package/libs/libusb/patches/001-Correct-a-typo-in-the-Changelog-and-clean-up-a-stray.patch

@@ -0,0 +1,29 @@
+From 369af149e3ad92514a2d24f112cedfeb7acaf558 Mon Sep 17 00:00:00 2001
+From: Chris Dickens <christopher.a.dickens@gmail.com>
+Date: Sun, 13 Dec 2020 15:46:27 -0800
+Subject: [PATCH] Correct a typo in the Changelog and clean up a stray file
+
+Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
+---
+ ChangeLog             | 2 +-
+ libusb/version_nano.h | 2 +-
+ test                  | 0
+ 3 files changed, 2 insertions(+), 2 deletions(-)
+ delete mode 100644 test
+
+--- a/ChangeLog
++++ b/ChangeLog
+@@ -12,7 +12,7 @@ visit: http://log.libusb.info
+ * Darwin (macOS): use IOUSBDevice as darwin_device_class explicitly (#693)
+ * Linux: Drop support for kernel older than 2.6.32
+ * Linux: Provide an event thread name (#689)
+-* Linux: Wait until all USBs have been reaped before freeing them (#607)
++* Linux: Wait until all URBs have been reaped before freeing them (#607)
+ * NetBSD: Recognize device timeouts (#710)
+ * OpenBSD: Allow opening ugen devices multiple times (#763)
+ * OpenBSD: Support libusb_get_port_number() (#764)
+--- a/libusb/version_nano.h
++++ b/libusb/version_nano.h
+@@ -1 +1 @@
+-#define LIBUSB_NANO 11584
++#define LIBUSB_NANO 11585

package/libs/libusb/patches/002-linux_usbfs-Fix-parsing-of-descriptors-for-multi-con.patch

@@ -0,0 +1,61 @@
+From f6d2cb561402c3b6d3627c0eb89e009b503d9067 Mon Sep 17 00:00:00 2001
+From: Chris Dickens <christopher.a.dickens@gmail.com>
+Date: Sun, 13 Dec 2020 15:49:19 -0800
+Subject: [PATCH] linux_usbfs: Fix parsing of descriptors for
+ multi-configuration devices
+
+Commit e2be556bd2 ("linux_usbfs: Parse config descriptors during device
+initialization") introduced a regression for devices with multiple
+configurations. The logic that verifies the reported length of the
+configuration descriptors failed to count the length of the
+configuration descriptor itself and would truncate the actual length by
+9 bytes, leading to a parsing error for subsequent descriptors.
+
+Closes #825
+
+Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
+---
+ libusb/os/linux_usbfs.c | 12 ++++++++----
+ libusb/version_nano.h   |  2 +-
+ 2 files changed, 9 insertions(+), 5 deletions(-)
+
+--- a/libusb/os/linux_usbfs.c
++++ b/libusb/os/linux_usbfs.c
+@@ -641,7 +641,12 @@ static int seek_to_next_config(struct li
+ 	uint8_t *buffer, size_t len)
+ {
+ 	struct usbi_descriptor_header *header;
+-	int offset = 0;
++	int offset;
++
++	/* Start seeking past the config descriptor */
++	offset = LIBUSB_DT_CONFIG_SIZE;
++	buffer += LIBUSB_DT_CONFIG_SIZE;
++	len -= LIBUSB_DT_CONFIG_SIZE;
+ 
+ 	while (len > 0) {
+ 		if (len < 2) {
+@@ -718,7 +723,7 @@ static int parse_config_descriptors(stru
+ 		}
+ 
+ 		if (priv->sysfs_dir) {
+-			 /*
++			/*
+ 			 * In sysfs wTotalLength is ignored, instead the kernel returns a
+ 			 * config descriptor with verified bLength fields, with descriptors
+ 			 * with an invalid bLength removed.
+@@ -727,8 +732,7 @@ static int parse_config_descriptors(stru
+ 			int offset;
+ 
+ 			if (num_configs > 1 && idx < num_configs - 1) {
+-				offset = seek_to_next_config(ctx, buffer + LIBUSB_DT_CONFIG_SIZE,
+-							     remaining - LIBUSB_DT_CONFIG_SIZE);
++				offset = seek_to_next_config(ctx, buffer, remaining);
+ 				if (offset < 0)
+ 					return offset;
+ 				sysfs_config_len = (uint16_t)offset;
+--- a/libusb/version_nano.h
++++ b/libusb/version_nano.h
+@@ -1 +1 @@
+-#define LIBUSB_NANO 11585
++#define LIBUSB_NANO 11586

package/libs/mbedtls/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=mbedtls
-PKG_VERSION:=2.16.10
-PKG_RELEASE:=1
+PKG_VERSION:=2.16.11
+PKG_RELEASE:=$(AUTORELEASE)
 PKG_USE_MIPS16:=0
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/ARMmbed/mbedtls/tar.gz/v$(PKG_VERSION)?
-PKG_HASH:=96257bb03b30300b2f35f861ffe204ed957e9fd0329d80646fe57fc49f589b29
+PKG_HASH:=c18e7e9abf95e69e425260493720470021384a1728417042060a35d0b7b18b41
 
 PKG_BUILD_PARALLEL:=1
 PKG_LICENSE:=GPL-2.0-or-later

package/libs/ncurses/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ncurses
 PKG_VERSION:=6.2
-PKG_RELEASE:=1
+PKG_RELEASE:=3
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=@GNU/$(PKG_NAME)
@@ -120,7 +120,21 @@ ifneq ($(HOST_OS),FreeBSD)
 			mv $$$$dir $$$$(echo -ne "\x$$$$dir"); \
 		done \
 	)
-	for file in a/ansi d/dumb l/linux r/rxvt r/rxvt-unicode s/screen v/vt100 v/vt102 x/xterm x/xterm-color x/xterm-256color; do \
+	for file in \
+		a/ansi \
+		d/dumb \
+		l/linux \
+		r/rxvt \
+		r/rxvt-unicode \
+		s/screen \
+		s/screen-256color \
+		t/tmux \
+		t/tmux-256color \
+		v/vt100 \
+		v/vt102 \
+		x/xterm \
+		x/xterm-color \
+		x/xterm-256color; do \
 		$(INSTALL_DIR) $(1)/usr/share/terminfo/`dirname $$$$file`; \
 		$(CP) $(PKG_INSTALL_DIR)/usr/share/terminfo/$$$$file \
 			$(1)/usr/share/terminfo/$$$$file; \

package/libs/openssl/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=openssl
 PKG_BASE:=1.1.1
-PKG_BUGFIX:=k
+PKG_BUGFIX:=l
 PKG_VERSION:=$(PKG_BASE)$(PKG_BUGFIX)
 PKG_RELEASE:=1
 PKG_USE_MIPS16:=0
@@ -26,7 +26,7 @@ PKG_SOURCE_URL:= \
 	ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/ \
 	ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/old/$(PKG_BASE)/
 
-PKG_HASH:=892a0875b9872acd04a9fde79b1f943075d5ea162415de3047c327df33fbaee5
+PKG_HASH:=0b7a3e5e59c34827fe0c3a74b7ec8baef302b98fa80088d7f9153aa16fa76bd1
 
 PKG_LICENSE:=OpenSSL
 PKG_LICENSE_FILES:=LICENSE

package/libs/openssl/patches/410-eng_devcrypto-add-configuration-options.patch

@@ -1,4 +1,4 @@
-From 1c2fabcdb34e436286b4a8760cfbfbff11ea551a Mon Sep 17 00:00:00 2001
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
 From: Eneas U de Queiroz <cote2004-github@yahoo.com>
 Date: Sat, 3 Nov 2018 15:41:10 -0300
 Subject: eng_devcrypto: add configuration options
@@ -14,7 +14,6 @@ Reviewed-by: Richard Levitte <levitte@openssl.org>
 (Merged from https://github.com/openssl/openssl/pull/7585)
 
 diff --git a/crypto/engine/eng_devcrypto.c b/crypto/engine/eng_devcrypto.c
-index a2c9a966f7..5ec38ca8f3 100644
 --- a/crypto/engine/eng_devcrypto.c
 +++ b/crypto/engine/eng_devcrypto.c
 @@ -16,6 +16,7 @@
@@ -558,7 +557,7 @@ index a2c9a966f7..5ec38ca8f3 100644
  /******************************************************************************
   *
   * LOAD / UNLOAD
-@@ -793,6 +1109,8 @@ void engine_load_devcrypto_int()
+@@ -806,6 +1122,8 @@ void engine_load_devcrypto_int()
  
      if (!ENGINE_set_id(e, "devcrypto")
          || !ENGINE_set_name(e, "/dev/crypto engine")

package/libs/wolfssl/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wolfssl
-PKG_VERSION:=4.7.0-stable
-PKG_RELEASE:=1
+PKG_VERSION:=4.8.1-stable
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://github.com/wolfSSL/wolfssl/archive/v$(PKG_VERSION)
-PKG_HASH:=b0e740b31d4d877d540ad50cc539a8873fc41af02bd3091c4357b403f7106e31
+PKG_HASH:=50db45f348f47e00c93dd244c24108220120cb3cc9d01434789229c32937c444
 
 PKG_FIXUP:=libtool libtool-abiver
 PKG_INSTALL:=1
@@ -58,11 +58,18 @@ define Package/libwolfssl/config
 	source "$(SOURCE)/Config.in"
 endef
 
-TARGET_CFLAGS += $(FPIC) -DFP_MAX_BITS=8192 -fomit-frame-pointer -flto
+TARGET_CFLAGS += \
+	$(FPIC) \
+	-fomit-frame-pointer \
+	-flto \
+	-DFP_MAX_BITS=8192 \
+	-DWOLFSSL_ALT_CERT_CHAINS
+
 TARGET_LDFLAGS += -flto
 
 # --enable-stunnel needed for OpenSSL API compatibility bits
 CONFIGURE_ARGS += \
+	--enable-reproducible-build \
 	--enable-lighty \
 	--enable-opensslall \
 	--enable-opensslextra \
@@ -95,7 +102,7 @@ endif
 
 ifeq ($(CONFIG_WOLFSSL_HAS_WPAS),y)
 CONFIGURE_ARGS += \
-	--enable-wpas --enable-sha512 --enable-fortress --enable-fastmath
+	--enable-wpas --enable-fortress --enable-fastmath
 endif
 
 define Build/InstallDev

package/libs/wolfssl/patches/001-Maths-x86-asm-change-asm-snippets-to-get-compiling.patch

@@ -0,0 +1,116 @@
+From fa8f23284d4689c2a737204b337b58d966dcbd8c Mon Sep 17 00:00:00 2001
+From: Sean Parkinson <sean@wolfssl.com>
+Date: Fri, 20 Aug 2021 10:23:38 +1000
+Subject: [PATCH] Maths x86 asm: change asm snippets to get compiling
+
+TFM:
+  Use register or memory for c0, c1, c2 in SQRADD and SQRADD2.
+SP:
+  Use register or memory for vl, vh, vo in SP_ASM_MUL_ADD,
+SP_ASM_MUL_ADD2 and SP_ASM_SQR_ADD.
+---
+ wolfcrypt/src/asm.c    | 29 ++++++++++++++++++++---------
+ wolfcrypt/src/sp_int.c |  6 +++---
+ 2 files changed, 23 insertions(+), 12 deletions(-)
+
+--- a/wolfcrypt/src/asm.c
++++ b/wolfcrypt/src/asm.c
+@@ -698,33 +698,39 @@ __asm__(                             \
+ 
+ #define SQRADD(i, j)                                      \
+ __asm__(                                                  \
+-     "movl  %6,%%eax     \n\t"                            \
++     "movl  %3,%%eax     \n\t"                            \
+      "mull  %%eax        \n\t"                            \
+      "addl  %%eax,%0     \n\t"                            \
+      "adcl  %%edx,%1     \n\t"                            \
+      "adcl  $0,%2        \n\t"                            \
+-     :"=r"(c0), "=r"(c1), "=r"(c2): "0"(c0), "1"(c1), "2"(c2), "m"(i) :"%eax","%edx","cc");
++     :"+rm"(c0), "+rm"(c1), "+rm"(c2)                     \
++     : "m"(i)                                             \
++     :"%eax","%edx","cc");
+ 
+ #define SQRADD2(i, j)                                     \
+ __asm__(                                                  \
+-     "movl  %6,%%eax     \n\t"                            \
+-     "mull  %7           \n\t"                            \
++     "movl  %3,%%eax     \n\t"                            \
++     "mull  %4           \n\t"                            \
+      "addl  %%eax,%0     \n\t"                            \
+      "adcl  %%edx,%1     \n\t"                            \
+      "adcl  $0,%2        \n\t"                            \
+      "addl  %%eax,%0     \n\t"                            \
+      "adcl  %%edx,%1     \n\t"                            \
+      "adcl  $0,%2        \n\t"                            \
+-     :"=r"(c0), "=r"(c1), "=r"(c2): "0"(c0), "1"(c1), "2"(c2), "m"(i), "m"(j)  :"%eax","%edx", "cc");
++     :"+rm"(c0), "+rm"(c1), "+rm"(c2)                     \
++     : "m"(i), "m"(j)                                     \
++     :"%eax","%edx", "cc");
+ 
+ #define SQRADDSC(i, j)                                    \
+-__asm__(                                                     \
++__asm__(                                                  \
+      "movl  %3,%%eax     \n\t"                            \
+      "mull  %4           \n\t"                            \
+      "movl  %%eax,%0     \n\t"                            \
+      "movl  %%edx,%1     \n\t"                            \
+      "xorl  %2,%2        \n\t"                            \
+-     :"=r"(sc0), "=r"(sc1), "=r"(sc2): "g"(i), "g"(j) :"%eax","%edx","cc");
++     :"=r"(sc0), "=r"(sc1), "=r"(sc2)                     \
++     : "g"(i), "g"(j)                                     \
++     :"%eax","%edx","cc");
+ 
+ #define SQRADDAC(i, j)                                    \
+ __asm__(                                                  \
+@@ -733,7 +739,9 @@ __asm__(
+      "addl  %%eax,%0     \n\t"                            \
+      "adcl  %%edx,%1     \n\t"                            \
+      "adcl  $0,%2        \n\t"                            \
+-     :"=r"(sc0), "=r"(sc1), "=r"(sc2): "0"(sc0), "1"(sc1), "2"(sc2), "g"(i), "g"(j) :"%eax","%edx","cc");
++     :"=r"(sc0), "=r"(sc1), "=r"(sc2)                     \
++     : "0"(sc0), "1"(sc1), "2"(sc2), "g"(i), "g"(j)       \
++     :"%eax","%edx","cc");
+ 
+ #define SQRADDDB                                          \
+ __asm__(                                                  \
+@@ -743,7 +751,10 @@ __asm__(
+      "addl %6,%0         \n\t"                            \
+      "adcl %7,%1         \n\t"                            \
+      "adcl %8,%2         \n\t"                            \
+-     :"=r"(c0), "=r"(c1), "=r"(c2) : "0"(c0), "1"(c1), "2"(c2), "r"(sc0), "r"(sc1), "r"(sc2) : "cc");
++     :"=r"(c0), "=r"(c1), "=r"(c2)                        \
++     : "0"(c0), "1"(c1), "2"(c2), "r"(sc0), "r"(sc1),     \
++       "r"(sc2)                                           \
++     : "cc");
+ 
+ #elif defined(TFM_X86_64)
+ /* x86-64 optimized */
+--- a/wolfcrypt/src/sp_int.c
++++ b/wolfcrypt/src/sp_int.c
+@@ -476,7 +476,7 @@ static WC_INLINE sp_int_digit sp_div_wor
+         "addl	%%eax, %[l]	\n\t"                    \
+         "adcl	%%edx, %[h]	\n\t"                    \
+         "adcl	$0   , %[o]	\n\t"                    \
+-        : [l] "+r" (vl), [h] "+r" (vh), [o] "+r" (vo)    \
++        : [l] "+rm" (vl), [h] "+rm" (vh), [o] "+rm" (vo) \
+         : [a] "r" (va), [b] "r" (vb)                     \
+         : "eax", "edx", "cc"                             \
+     )
+@@ -502,7 +502,7 @@ static WC_INLINE sp_int_digit sp_div_wor
+         "addl	%%eax, %[l]	\n\t"                    \
+         "adcl	%%edx, %[h]	\n\t"                    \
+         "adcl	$0   , %[o]	\n\t"                    \
+-        : [l] "+r" (vl), [h] "+r" (vh), [o] "+r" (vo)    \
++        : [l] "+rm" (vl), [h] "+rm" (vh), [o] "+rm" (vo) \
+         : [a] "r" (va), [b] "r" (vb)                     \
+         : "eax", "edx", "cc"                             \
+     )
+@@ -541,7 +541,7 @@ static WC_INLINE sp_int_digit sp_div_wor
+         "addl	%%eax, %[l]	\n\t"                    \
+         "adcl	%%edx, %[h]	\n\t"                    \
+         "adcl	$0   , %[o]	\n\t"                    \
+-        : [l] "+r" (vl), [h] "+r" (vh), [o] "+r" (vo)    \
++        : [l] "+rm" (vl), [h] "+rm" (vh), [o] "+rm" (vo) \
+         : [a] "m" (va)                                   \
+         : "eax", "edx", "cc"                             \
+     )

package/libs/wolfssl/patches/002-Update-macro-guard-on-SHA256-transform-call.patch

@@ -0,0 +1,22 @@
+From f447e4c1fa4c932c0286fa0331966756e243db81 Mon Sep 17 00:00:00 2001
+From: JacobBarthelmeh <jacob@wolfssl.com>
+Date: Fri, 17 Sep 2021 15:06:13 -0700
+Subject: [PATCH] update macro guard on SHA256 transform call
+
+---
+ src/ssl.c   | 3 ++-
+ tests/api.c | 3 ++-
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+--- a/src/ssl.c
++++ b/src/ssl.c
+@@ -17639,7 +17639,8 @@ size_t wolfSSL_get_client_random(const W
+     
+     #if defined(OPENSSL_EXTRA)
+     #if !defined(HAVE_SELFTEST) && (!defined(HAVE_FIPS) || \
+-        (defined(HAVE_FIPS_VERSION) && (HAVE_FIPS_VERSION > 2)))
++        (defined(HAVE_FIPS_VERSION) && (HAVE_FIPS_VERSION > 2))) && \
++        !defined(WOLFSSL_DEVCRYPTO_HASH) && !defined(WOLFSSL_AFALG_HASH)
+     /* Apply SHA256 transformation to the data */
+     int wolfSSL_SHA256_Transform(WOLFSSL_SHA256_CTX* sha256, 
+                                                 const unsigned char* data)

package/libs/wolfssl/patches/100-disable-hardening-check.patch

@@ -1,6 +1,6 @@
 --- a/wolfssl/wolfcrypt/settings.h
 +++ b/wolfssl/wolfcrypt/settings.h
-@@ -2255,7 +2255,7 @@ extern void uITRON4_free(void *p) ;
+@@ -2274,7 +2274,7 @@ extern void uITRON4_free(void *p) ;
  #endif
  
  /* warning for not using harden build options (default with ./configure) */

package/libs/wolfssl/patches/110-build-with-libtool-2.4.patch

@@ -0,0 +1,13 @@
+diff --git a/configure.ac b/configure.ac
+index 144c857e4..de7f6b45a 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -32,7 +32,7 @@ AC_ARG_PROGRAM
+ 
+ AC_CONFIG_HEADERS([config.h:config.in])
+ 
+-LT_PREREQ([2.4.2])
++LT_PREREQ([2.4])
+ LT_INIT([disable-static win32-dll])
+ 
+ #shared library versioning

package/libs/wolfssl/patches/200-ecc-rng.patch

@@ -0,0 +1,50 @@
+Since commit 6467de5a8840 ("Randomize z ordinates in scalar
+mult when timing resistant") wolfssl requires a RNG for an EC
+key when the hardened built option is selected.
+
+wc_ecc_set_rng is only available when built hardened, so there
+is no safe way to install the RNG to the key regardless whether
+or not wolfssl is compiled hardened.
+
+Always export wc_ecc_set_rng so tools such as hostapd can install
+RNG regardless of the built settings for wolfssl.
+
+--- a/wolfcrypt/src/ecc.c
++++ b/wolfcrypt/src/ecc.c
+@@ -10938,21 +10938,21 @@ void wc_ecc_fp_free(void)
+ 
+ #endif /* FP_ECC */
+ 
+-#ifdef ECC_TIMING_RESISTANT
+ int wc_ecc_set_rng(ecc_key* key, WC_RNG* rng)
+ {
+     int err = 0;
+ 
++#ifdef ECC_TIMING_RESISTANT
+     if (key == NULL) {
+         err = BAD_FUNC_ARG;
+     }
+     else {
+         key->rng = rng;
+     }
++#endif
+ 
+     return err;
+ }
+-#endif
+ 
+ #ifdef HAVE_ECC_ENCRYPT
+ 
+--- a/wolfssl/wolfcrypt/ecc.h
++++ b/wolfssl/wolfcrypt/ecc.h
+@@ -616,10 +616,8 @@ WOLFSSL_API
+ void wc_ecc_fp_free(void);
+ WOLFSSL_LOCAL
+ void wc_ecc_fp_init(void);
+-#ifdef ECC_TIMING_RESISTANT
+ WOLFSSL_API
+ int wc_ecc_set_rng(ecc_key* key, WC_RNG* rng);
+-#endif
+ 
+ WOLFSSL_API
+ int wc_ecc_set_curve(ecc_key* key, int keysize, int curve_id);

package/network/config/netifd/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/netifd.git
-PKG_SOURCE_DATE:=2021-05-26
-PKG_SOURCE_VERSION:=899c2a4520526d43113f73cf673f20e2486a40fb
-PKG_MIRROR_HASH:=354905192b30af88ea953241ed332555e67cdb7e3b54dd139250bf1e6ad3a709
+PKG_SOURCE_DATE:=2021-07-26
+PKG_SOURCE_VERSION:=440eb0647708274cc8d7d9e7c2bb0cfdfba90023
+PKG_MIRROR_HASH:=eed957036ab608fdc49bdf801fc5b4405fcd2a3a5e5d3343ec39898e156c10e9
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 PKG_LICENSE:=GPL-2.0

package/network/config/qos-scripts/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=qos-scripts
 PKG_VERSION:=1.3.1
-PKG_RELEASE:=2
+PKG_RELEASE:=$(AUTORELEASE)
 PKG_LICENSE:=GPL-2.0
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>

package/network/config/qos-scripts/files/usr/lib/qos/generate.sh

@@ -326,7 +326,8 @@ start_interface() {
 			append cstr "$classnr:$prio:$avgrate:$pktsize:$pktdelay:$maxrate:$qdisc:$filter" "$N"
 		done
 		append ${prefix}q "$(tcrules)" "$N"
-		export dev_${dir}="ip link set $dev up >&- 2>&-
+		export dev_${dir}="ip link add ${dev} type ifb >&- 2>&-
+ip link set $dev up >&- 2>&-
 tc qdisc del dev $dev root >&- 2>&-
 tc qdisc add dev $dev root handle 1: hfsc default ${class_default}0
 tc class add dev $dev parent 1: classid 1:1 hfsc sc rate ${rate}kbit ul rate ${rate}kbit"

package/network/services/dnsmasq/files/dnsmasq.init

@@ -19,6 +19,7 @@ BASEDHCPSTAMPFILE="/var/run/dnsmasq"
 DHCPBOGUSHOSTNAMEFILE="/usr/share/dnsmasq/dhcpbogushostname.conf"
 RFC6761FILE="/usr/share/dnsmasq/rfc6761.conf"
 DHCPSCRIPT="/usr/lib/dnsmasq/dhcp-script.sh"
+DHCPSCRIPT_DEPENDS="/usr/share/libubox/jshn.sh /usr/bin/jshn /bin/ubus"
 
 DNSMASQ_DHCP_VER=4
 
@@ -161,7 +162,7 @@ append_server() {
 }
 
 append_rev_server() {
-        xappend "--rev-server=$1"
+	xappend "--rev-server=$1"
 }
 
 append_address() {
@@ -186,7 +187,22 @@ append_notinterface() {
 	xappend "--except-interface=$ifname"
 }
 
+ismounted() {
+	local filename="$1"
+	local dirname
+	for dirname in $EXTRA_MOUNT ; do
+		case "$filename" in
+			"${dirname}/"* | "${dirname}" )
+				return 1
+				;;
+		esac
+	done
+
+	return 0
+}
+
 append_addnhosts() {
+	ismounted "$1" || append EXTRA_MOUNT "$1"
 	xappend "--addn-hosts=$1"
 }
 
@@ -801,9 +817,10 @@ dnsmasq_start()
 	config_get_bool disabled "$cfg" disabled 0
 	[ "$disabled" -gt 0 ] && return 0
 
-	# reset list of DOMAINS and DNS servers (for each dnsmasq instance)
+	# reset list of DOMAINS, DNS servers and EXTRA mounts (for each dnsmasq instance)
 	DNS_SERVERS=""
 	DOMAIN=""
+	EXTRA_MOUNT=""
 	CONFIGFILE="${BASECONFIGFILE}.${cfg}"
 	CONFIGFILE_TMP="${CONFIGFILE}.$$"
 	HOSTFILE="${BASEHOSTFILE}.${cfg}"
@@ -878,8 +895,16 @@ dnsmasq_start()
 	append_bool "$cfg" noresolv "--no-resolv"
 	append_bool "$cfg" localise_queries "--localise-queries"
 	append_bool "$cfg" readethers "--read-ethers"
-	append_bool "$cfg" dbus "--enable-dbus"
-	append_bool "$cfg" ubus "--enable-ubus"	1
+
+	local instance_name="dnsmasq.$cfg"
+	if [ "$cfg" = "$DEFAULT_INSTANCE" ]; then
+		instance_name="dnsmasq"
+	fi
+	config_get_bool dbus "$cfg" "dbus" 0
+	[ $dbus -gt 0 ] && xappend "--enable-dbus=uk.org.thekelleys.$instance_name"
+	config_get_bool ubus "$cfg" "ubus" 1
+	[ $ubus -gt 0 ] && xappend "--enable-ubus=$instance_name"
+
 	append_bool "$cfg" expandhosts "--expand-hosts"
 	config_get tftp_root "$cfg" "tftp_root"
 	[ -n "$tftp_root" ] && mkdir -p "$tftp_root" && append_bool "$cfg" enable_tftp "--enable-tftp"
@@ -907,7 +932,7 @@ dnsmasq_start()
 	append_parm "$cfg" "minport" "--min-port"
 	append_parm "$cfg" "maxport" "--max-port"
 	append_parm "$cfg" "domain" "--domain"
-	append_parm "$cfg" "local" "--server"
+	append_parm "$cfg" "local" "--local"
 	config_list_foreach "$cfg" "listen_address" append_listenaddress
 	config_list_foreach "$cfg" "server" append_server
 	config_list_foreach "$cfg" "rev_server" append_rev_server
@@ -917,6 +942,14 @@ dnsmasq_start()
 		config_list_foreach "$cfg" "interface" append_interface
 		config_list_foreach "$cfg" "notinterface" append_notinterface
 	}
+	config_get_bool ignore_hosts_dir "$cfg" ignore_hosts_dir 0
+	if [ "$ignore_hosts_dir" = "1" ]; then
+		xappend "--addn-hosts=$HOSTFILE"
+		append EXTRA_MOUNT "$HOSTFILE"
+	else
+		xappend "--addn-hosts=$(dirname $HOSTFILE)"
+		append EXTRA_MOUNT "$(dirname $HOSTFILE)"
+	fi
 	config_list_foreach "$cfg" "addnhosts" append_addnhosts
 	config_list_foreach "$cfg" "bogusnxdomain" append_bogusnxdomain
 	append_parm "$cfg" "leasefile" "--dhcp-leasefile" "/tmp/dhcp.leases"
@@ -1012,7 +1045,6 @@ dnsmasq_start()
 
 	xappend "--dhcp-broadcast=tag:needs-broadcast"
 
-	xappend "--addn-hosts=$(dirname $HOSTFILE)"
 
 	config_get dnsmasqconfdir "$cfg" confdir "/tmp/dnsmasq.d"
 	xappend "--conf-dir=$dnsmasqconfdir"
@@ -1106,7 +1138,10 @@ dnsmasq_start()
 	procd_set_param respawn
 
 	procd_add_jail dnsmasq ubus log
-	procd_add_jail_mount $CONFIGFILE $TRUSTANCHORSFILE $HOSTFILE $RFC6761FILE $DHCPBOGUSHOSTNAMEFILE /etc/passwd /etc/group /etc/TZ /dev/null /dev/urandom $dnsmasqconffile $dnsmasqconfdir $resolvdir $user_dhcpscript /etc/hosts /etc/ethers /sbin/hotplug-call $EXTRA_MOUNT $DHCPSCRIPT
+	procd_add_jail_mount $CONFIGFILE $DHCPBOGUSHOSTNAMEFILE $DHCPSCRIPT $DHCPSCRIPT_DEPENDS
+	procd_add_jail_mount $EXTRA_MOUNT $RFC6761FILE $TRUSTANCHORSFILE
+	procd_add_jail_mount $dnsmasqconffile $dnsmasqconfdir $resolvdir $user_dhcpscript
+	procd_add_jail_mount /etc/passwd /etc/group /etc/TZ /etc/hosts /etc/ethers
 	procd_add_jail_mount_rw /var/run/dnsmasq/ $leasefile
 
 	procd_close_instance
@@ -1155,6 +1190,7 @@ boot()
 start_service() {
 	local instance="$1"
 	local instance_found=0
+	local first_instance=""
 
 	. /lib/functions/network.sh
 
@@ -1165,10 +1201,27 @@ start_service() {
 			if [ -n "$instance" ] && [ "$instance" = "$name" ]; then
 				instance_found=1
 			fi
+			if [ -z "$DEFAULT_INSTANCE" ]; then
+				local disabled
+				config_get_bool disabled "$name" disabled 0
+				if [ "$disabled" -eq 0 ]; then
+					# First enabled section will be assigned default instance name.
+					# Unnamed sections get precedence over named sections.
+					if expr "$cfg" : 'cfg[0-9a-f]*$' >/dev/null = "9"; then # See uci_fixup_section.
+						DEFAULT_INSTANCE="$name" # Unnamed config section.
+					elif [ -z "$first_instance" ]; then
+						first_instance="$name"
+					fi
+				fi
+			fi
 		fi
 	}
 
+	DEFAULT_INSTANCE=""
 	config_load dhcp
+	if [ -z "$DEFAULT_INSTANCE" ]; then
+		DEFAULT_INSTANCE="$first_instance" # No unnamed config section was found.
+	fi
 
 	if [ -n "$instance" ]; then
 		[ "$instance_found" -gt 0 ] || return

package/network/services/hostapd/Makefile

@@ -7,7 +7,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=hostapd
-PKG_RELEASE:=32
+PKG_RELEASE:=35
 
 PKG_SOURCE_URL:=http://w1.fi/hostap.git
 PKG_SOURCE_PROTO:=git

package/network/services/hostapd/files/hostapd.sh

@@ -92,7 +92,7 @@ hostapd_common_add_device_config() {
 	config_add_array basic_rate
 	config_add_array supported_rates
 
-	config_add_string country
+	config_add_string country country3
 	config_add_boolean country_ie doth
 	config_add_boolean spectrum_mgmt_required
 	config_add_int local_pwr_constraint
@@ -114,7 +114,7 @@ hostapd_prepare_device_config() {
 
 	local base_cfg=
 
-	json_get_vars country country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
+	json_get_vars country country3 country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
 		acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density
 
 	hostapd_set_log_options base_cfg
@@ -128,6 +128,7 @@ hostapd_prepare_device_config() {
 
 	[ -n "$country" ] && {
 		append base_cfg "country_code=$country" "$N"
+		[ -n "$country3" ] && append base_cfg "country3=$country3" "$N"
 
 		[ "$country_ie" -gt 0 ] && {
 			append base_cfg "ieee80211d=1" "$N"
@@ -251,6 +252,8 @@ hostapd_common_add_bss_config() {
 	config_add_int acct_port
 	config_add_int acct_interval
 
+	config_add_int bss_load_update_period chan_util_avg_period
+
 	config_add_string dae_client
 	config_add_string dae_secret
 	config_add_int dae_port
@@ -281,7 +284,7 @@ hostapd_common_add_bss_config() {
 	config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
 	config_add_string multi_ap_backhaul_ssid multi_ap_backhaul_key
 
-	config_add_boolean wnm_sleep_mode bss_transition
+	config_add_boolean wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition
 	config_add_int time_advertisement
 	config_add_string time_zone
 
@@ -703,13 +706,17 @@ hostapd_set_bss_options() {
 		append bss_conf "iapp_interface=$ifname" "$N"
 	}
 
-	json_get_vars time_advertisement time_zone wnm_sleep_mode bss_transition
+	json_get_vars time_advertisement time_zone wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition
 	set_default bss_transition 0
 	set_default wnm_sleep_mode 0
+	set_default wnm_sleep_mode_no_keys 0
 
 	[ -n "$time_advertisement" ] && append bss_conf "time_advertisement=$time_advertisement" "$N"
 	[ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N"
-	[ "$wnm_sleep_mode" -eq "1" ] && append bss_conf "wnm_sleep_mode=1" "$N"
+	if [ "$wnm_sleep_mode" -eq "1" ]; then
+		append bss_conf "wnm_sleep_mode=1" "$N"
+		[ "$wnm_sleep_mode_no_keys" -eq "1" ] && append bss_conf "wnm_sleep_mode_no_keys=1" "$N"
+	fi
 	[ "$bss_transition" -eq "1" ] && append bss_conf "bss_transition=1" "$N"
 
 	json_get_vars ieee80211k rrm_neighbor_report rrm_beacon_report

package/network/services/hostapd/patches/802-wolfssl-init-RNG-with-ECC-key.patch

@@ -0,0 +1,48 @@
+From 21ce83b4ae2b9563175fdb4fc4312096cc399cf8 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Wed, 5 May 2021 00:44:34 +0200
+Subject: [PATCH] wolfssl: add RNG to EC key
+
+Since upstream commit 6467de5a8840 ("Randomize z ordinates in
+scalar mult when timing resistant") WolfSSL requires a RNG for
+the EC key when built hardened which is the default.
+
+Set the RNG for the EC key to fix connections for OWE clients.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ src/crypto/crypto_wolfssl.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/src/crypto/crypto_wolfssl.c b/src/crypto/crypto_wolfssl.c
+index 2e4bf8962..ed2528159 100644
+--- a/src/crypto/crypto_wolfssl.c
++++ b/src/crypto/crypto_wolfssl.c
+@@ -1303,6 +1303,7 @@ int ecc_projective_add_point(ecc_point *P, ecc_point *Q, ecc_point *R,
+ 
+ struct crypto_ec {
+ 	ecc_key key;
++	WC_RNG rng;
+ 	mp_int a;
+ 	mp_int prime;
+ 	mp_int order;
+@@ -1357,6 +1358,8 @@ struct crypto_ec * crypto_ec_init(int group)
+ 		return NULL;
+ 
+ 	if (wc_ecc_init(&e->key) != 0 ||
++	    wc_InitRng(&e->rng) != 0 ||
++	    wc_ecc_set_rng(&e->key, &e->rng) != 0 ||
+ 	    wc_ecc_set_curve(&e->key, 0, curve_id) != 0 ||
+ 	    mp_init(&e->a) != MP_OKAY ||
+ 	    mp_init(&e->prime) != MP_OKAY ||
+@@ -1388,6 +1391,7 @@ void crypto_ec_deinit(struct crypto_ec* e)
+ 	mp_clear(&e->order);
+ 	mp_clear(&e->prime);
+ 	mp_clear(&e->a);
++	wc_FreeRng(&e->rng);
+ 	wc_ecc_free(&e->key);
+ 	os_free(e);
+ }
+-- 
+2.31.1
+

package/network/services/hostapd/src/src/ap/ubus.c

@@ -1351,6 +1351,11 @@ void hostapd_ubus_free_bss(struct hostapd_data *hapd)
 	struct ubus_object *obj = &hapd->ubus.obj;
 	char *name = (char *) obj->name;
 
+#ifdef CONFIG_MESH
+	if (hapd->conf->mesh & MESH_ENABLED)
+		return;
+#endif
+
 	if (!ctx)
 		return;
 

package/network/services/odhcpd/Makefile

@@ -12,9 +12,9 @@ PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/odhcpd.git
-PKG_SOURCE_DATE:=2021-01-06
-PKG_SOURCE_VERSION:=8d8a8cd35137ff0fa11b6be455fdd596a8d7d2e9
-PKG_MIRROR_HASH:=7149b4a434a35c1e64b20c708c0abbd381e034a2a1b4fbc1b7da0b039568b5b5
+PKG_SOURCE_DATE:=2021-07-18
+PKG_SOURCE_VERSION:=bc9d317f2921ae6b529f2c9f8de79b75992e206f
+PKG_MIRROR_HASH:=be96c4984821b8af95bfee1a29c082bb9eaa052cd3e03d8632ff02afd2debc81
 
 PKG_MAINTAINER:=Hans Dedecker <dedeckeh@gmail.com>
 PKG_LICENSE:=GPL-2.0

package/network/services/uhttpd/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uhttpd
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/uhttpd.git

package/network/services/uhttpd/files/uhttpd.init

@@ -35,13 +35,14 @@ generate_keys() {
 	local cfg="$1"
 	local key="$2"
 	local crt="$3"
-	local days bits country state location commonname
+	local days bits country state location organization commonname
 
 	config_get days       "$cfg" days
 	config_get bits       "$cfg" bits
 	config_get country    "$cfg" country
 	config_get state      "$cfg" state
 	config_get location   "$cfg" location
+	config_get organization "$cfg" organization
 	config_get commonname "$cfg" commonname
 	config_get key_type   "$cfg" key_type
 	config_get ec_curve   "$cfg" ec_curve
@@ -56,7 +57,7 @@ generate_keys() {
 	[ -n "$GENKEY_CMD" ] && {
 		$GENKEY_CMD \
 			-days ${days:-730} -newkey ${KEY_OPTS} -keyout "${UHTTPD_KEY}.new" -out "${UHTTPD_CERT}.new" \
-			-subj /C="${country:-ZZ}"/ST="${state:-Somewhere}"/L="${location:-Unknown}"/O="${commonname:-OpenWrt}$UNIQUEID"/CN="${commonname:-OpenWrt}"
+			-subj /C="${country:-ZZ}"/ST="${state:-Somewhere}"/L="${location:-Unknown}"/O="${organization:-OpenWrt$UNIQUEID}"/CN="${commonname:-OpenWrt}"
 		sync
 		mv "${UHTTPD_KEY}.new" "${UHTTPD_KEY}"
 		mv "${UHTTPD_CERT}.new" "${UHTTPD_CERT}"

package/network/utils/comgt/files/3g.usb

@@ -23,6 +23,8 @@ find_3g_iface() {
 	fi
 }
 
+[ "$ACTION" = add ] || [ "$ACTION" = remove ] || exit 0
+
 case "$DEVICENAME" in
 	tty*)
 		[ -e "/dev/$DEVICENAME" ] || [ "$ACTION" = remove ] || exit 0

package/network/utils/iw/Makefile

@@ -8,12 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=iw
-PKG_VERSION:=5.9
-PKG_RELEASE:=1
+PKG_VERSION:=5.9-8fab0c9e
+PKG_RELEASE:=$(AUTORELEASE)
 
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_SOURCE_URL:=@KERNEL/software/network/iw
-PKG_HASH:=293a07109aeb7e36267cf59e3ce52857e9ffae3a6666eb8ac77894b1839fe1f2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://git.kernel.org/pub/scm/linux/kernel/git/jberg/iw.git
+PKG_SOURCE_VERSION:=8fab0c9ee9db217587a58efcc37421c86edcb638
+PKG_MIRROR_HASH:=797b322bc03952f3127ae0a7da476c14ada1bbe9a9ae234a56dd6f864c568e16
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_LICENSE:=GPL-2.0

package/network/utils/iw/patches/001-nl80211_h_sync.patch

@@ -1,9 +1,99 @@
 --- a/nl80211.h
 +++ b/nl80211.h
-@@ -2527,6 +2527,13 @@ enum nl80211_commands {
+@@ -655,6 +655,9 @@
+  *	When a security association was established on an 802.1X network using
+  *	fast transition, this event should be followed by an
+  *	%NL80211_CMD_PORT_AUTHORIZED event.
++ *	Following a %NL80211_CMD_ROAM event userspace can issue
++ *	%NL80211_CMD_GET_SCAN in order to obtain the scan information for the
++ *	new BSS the card/driver roamed to.
+  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+  *	userspace that a connection was dropped by the AP or due to other
+  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+@@ -757,7 +760,8 @@
+  *	of any other interfaces, and other interfaces will again take
+  *	precedence when they are used.
+  *
+- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface
++ *	(no longer supported).
+  *
+  * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform
+  *	multicast to unicast conversion. When enabled, all multicast packets
+@@ -1177,6 +1181,10 @@
+  *	includes the contents of the frame. %NL80211_ATTR_ACK flag is included
+  *	if the recipient acknowledged the frame.
+  *
++ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is
++ *	passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
++ *	specify the wiphy index to be applied to.
++ *
+  * @NL80211_CMD_MAX: highest used command number
+  * @__NL80211_CMD_AFTER_LAST: internal use
+  */
+@@ -1407,6 +1415,8 @@ enum nl80211_commands {
+ 
+ 	NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
+ 
++	NL80211_CMD_SET_SAR_SPECS,
++
+ 	/* add new commands above here */
+ 
+ 	/* used to define NL80211_CMD_MAX below */
+@@ -1750,8 +1760,9 @@ enum nl80211_commands {
+  *	specify just a single bitrate, which is to be used for the beacon.
+  *	The driver must also specify support for this with the extended
+  *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+- *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
+- *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HT,
++ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT and
++ *	NL80211_EXT_FEATURE_BEACON_RATE_HE.
+  *
+  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
+  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+@@ -1955,8 +1966,15 @@ enum nl80211_commands {
+  * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+  *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
+  *	to be filled by the FW.
+- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
+- *      this feature.  Currently, only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
++ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
++ *      this feature during association. This is a flag attribute.
++ *	Currently only supported in mac80211 drivers.
+  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
+  *      ATTR_HT_CAPABILITY to which attention should be paid.
+  *      Currently, only mac80211 NICs support this feature.
+@@ -2077,7 +2095,8 @@ enum nl80211_commands {
+  *	until the channel switch event.
+  * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+  *	must be blocked on the current channel (before the channel switch
+- *	operation).
++ *	operation). Also included in the channel switch started event if quiet
++ *	was requested by the AP.
+  * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+  *	for the time while performing a channel switch.
+  * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
+@@ -2527,6 +2546,23 @@ enum nl80211_commands {
   *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
   *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
   *
++ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE
++ *	derivation in WPA3-Personal networks which are using SAE authentication.
++ *	This is a u8 attribute that encapsulates one of the values from
++ *	&enum nl80211_sae_pwe_mechanism.
++ *
++ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when
++ *	used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields
++ *	of %nl80211_sar_attrs which specifies the sar type and related
++ *	sar specs. Sar specs contains array of %nl80211_sar_specs_attrs.
++ *
 + * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and
 + *	disassoc events to indicate that an immediate reconnect to the AP
 + *	is desired.
@@ -14,14 +104,199 @@
   * @NUM_NL80211_ATTR: total number of nl80211_attrs available
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
-@@ -3016,6 +3023,10 @@ enum nl80211_attrs {
+@@ -3016,6 +3052,16 @@ enum nl80211_attrs {
  	NL80211_ATTR_S1G_CAPABILITY,
  	NL80211_ATTR_S1G_CAPABILITY_MASK,
  
++	NL80211_ATTR_SAE_PWE,
++
 +	NL80211_ATTR_RECONNECT_REQUESTED,
 +
++	NL80211_ATTR_SAR_SPEC,
++
++	NL80211_ATTR_DISABLE_HE,
++
 +	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 +
  	/* add attributes here, update the policy in nl80211.c */
  
  	__NL80211_ATTR_AFTER_LAST,
+@@ -5896,6 +5942,19 @@ enum nl80211_feature_flags {
+  * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+  *	unsolicited broadcast probe response transmission
+  *
++ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
++ *	configuration (AP/mesh) with HE rates.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
++ *      exchange protocol.
++ *
++ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
++ *      frame protection for all management frames exchanged during the
++ *      negotiation and range measurement procedure.
++ *
+  * @NUM_NL80211_EXT_FEATURES: number of extended features.
+  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+  */
+@@ -5956,6 +6015,10 @@ enum nl80211_ext_feature_index {
+ 	NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+ 	NL80211_EXT_FEATURE_FILS_DISCOVERY,
+ 	NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
++	NL80211_EXT_FEATURE_BEACON_RATE_HE,
++	NL80211_EXT_FEATURE_SECURE_LTF,
++	NL80211_EXT_FEATURE_SECURE_RTT,
++	NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ 
+ 	/* add new features before the definition below */
+ 	NUM_NL80211_EXT_FEATURES,
+@@ -6253,11 +6316,13 @@ struct nl80211_vendor_cmd_info {
+  * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+  * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+  * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
++ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
+  */
+ enum nl80211_tdls_peer_capability {
+ 	NL80211_TDLS_PEER_HT = 1<<0,
+ 	NL80211_TDLS_PEER_VHT = 1<<1,
+ 	NL80211_TDLS_PEER_WMM = 1<<2,
++	NL80211_TDLS_PEER_HE = 1<<3,
+ };
+ 
+ /**
+@@ -6849,6 +6914,9 @@ enum nl80211_peer_measurement_ftm_capa {
+  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
+  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
+  *	ranging will be used.
++ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
++ *	valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
++ *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+  *
+  * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
+  * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
+@@ -6867,6 +6935,7 @@ enum nl80211_peer_measurement_ftm_req {
+ 	NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+ 	NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
+ 	NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
++	NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
+ 
+ 	/* keep last */
+ 	NUM_NL80211_PMSR_FTM_REQ_ATTR,
+@@ -7124,4 +7193,115 @@ enum nl80211_unsol_bcast_probe_resp_attr
+ 	NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+ 		__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+ };
++
++/**
++ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE
++ *	derivation. Applicable only when WPA3-Personal SAE authentication is
++ *	used.
++ *
++ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that
++ *	attribute is not present from userspace.
++ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only
++ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only
++ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element
++ *	can be used.
++ */
++enum nl80211_sae_pwe_mechanism {
++	NL80211_SAE_PWE_UNSPECIFIED,
++	NL80211_SAE_PWE_HUNT_AND_PECK,
++	NL80211_SAE_PWE_HASH_TO_ELEMENT,
++	NL80211_SAE_PWE_BOTH,
++};
++
++/**
++ * enum nl80211_sar_type - type of SAR specs
++ *
++ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit
++ *
++ */
++enum nl80211_sar_type {
++	NL80211_SAR_TYPE_POWER,
++
++	/* add new type here */
++
++	/* Keep last */
++	NUM_NL80211_SAR_TYPE,
++};
++
++/**
++ * enum nl80211_sar_attrs - Attributes for SAR spec
++ *
++ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type.
++ *
++ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power
++ *	limit specifications. Each specification contains a set
++ *	of %nl80211_sar_specs_attrs.
++ *
++ *	For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER
++ *	and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX.
++ *
++ *	For sar_capa dump, it contains array of
++ *	%NL80211_SAR_ATTR_SPECS_START_FREQ
++ *	and %NL80211_SAR_ATTR_SPECS_END_FREQ.
++ *
++ * @__NL80211_SAR_ATTR_LAST: Internal
++ * @NL80211_SAR_ATTR_MAX: highest sar attribute
++ *
++ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC
++ */
++enum nl80211_sar_attrs {
++	__NL80211_SAR_ATTR_INVALID,
++
++	NL80211_SAR_ATTR_TYPE,
++	NL80211_SAR_ATTR_SPECS,
++
++	__NL80211_SAR_ATTR_LAST,
++	NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1,
++};
++
++/**
++ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs
++ *
++ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual
++ *	power limit value in units of 0.25 dBm if type is
++ *	NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm).
++ *	0 means userspace doesn't have SAR limitation on this associated range.
++ *
++ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the
++ *	index of exported freq range table and the associated power limitation
++ *	is applied to this range.
++ *
++ *	Userspace isn't required to set all the ranges advertised by WLAN driver,
++ *	and userspace can skip some certain ranges. These skipped ranges don't
++ *	have SAR limitations, and they are same as setting the
++ *	%NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any
++ *	value higher than regulatory allowed value just means SAR power
++ *	limitation is removed, but it's required to set at least one range.
++ *	It's not allowed to set duplicated range in one SET operation.
++ *
++ *	Every SET operation overwrites previous SET operation.
++ *
++ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end
++ *	frequency of this range edge when registering SAR capability to wiphy.
++ *	It's not a channel center frequency. The unit is kHz.
++ *
++ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal
++ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute
++ */
++enum nl80211_sar_specs_attrs {
++	__NL80211_SAR_ATTR_SPECS_INVALID,
++
++	NL80211_SAR_ATTR_SPECS_POWER,
++	NL80211_SAR_ATTR_SPECS_RANGE_INDEX,
++	NL80211_SAR_ATTR_SPECS_START_FREQ,
++	NL80211_SAR_ATTR_SPECS_END_FREQ,
++
++	__NL80211_SAR_ATTR_SPECS_LAST,
++	NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
++};
++
+ #endif /* __LINUX_NL80211_H */

package/network/utils/iw/patches/200-reduce_size.patch

@@ -1,6 +1,6 @@
 --- a/event.c
 +++ b/event.c
-@@ -944,6 +944,7 @@ static int print_event(struct nl_msg *ms
+@@ -956,6 +956,7 @@ static int print_event(struct nl_msg *ms
  	}
  
  	switch (gnlh->cmd) {
@@ -8,7 +8,7 @@
  	case NL80211_CMD_NEW_WIPHY:
  		printf("renamed to %s\n", nla_get_string(tb[NL80211_ATTR_WIPHY_NAME]));
  		break;
-@@ -979,6 +980,7 @@ static int print_event(struct nl_msg *ms
+@@ -991,6 +992,7 @@ static int print_event(struct nl_msg *ms
  	case NL80211_CMD_SCHED_SCAN_RESULTS:
  		printf("got scheduled scan results\n");
  		break;
@@ -16,7 +16,7 @@
  	case NL80211_CMD_WIPHY_REG_CHANGE:
  	case NL80211_CMD_REG_CHANGE:
  		if (gnlh->cmd == NL80211_CMD_WIPHY_REG_CHANGE)
-@@ -1061,6 +1063,7 @@ static int print_event(struct nl_msg *ms
+@@ -1073,6 +1075,7 @@ static int print_event(struct nl_msg *ms
  		mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC]));
  		printf("del station %s\n", macbuf);
  		break;
@@ -24,7 +24,7 @@
  	case NL80211_CMD_JOIN_IBSS:
  		mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC]));
  		printf("IBSS %s joined\n", macbuf);
-@@ -1254,9 +1257,9 @@ static int print_event(struct nl_msg *ms
+@@ -1271,9 +1274,9 @@ static int print_event(struct nl_msg *ms
  	case NL80211_CMD_CH_SWITCH_NOTIFY:
  		parse_ch_switch_notify(tb, gnlh->cmd);
  		break;
@@ -134,7 +134,7 @@
  {
 --- a/scan.c
 +++ b/scan.c
-@@ -1297,6 +1297,9 @@ static void print_ht_op(const uint8_t ty
+@@ -1306,6 +1306,9 @@ static void print_ht_op(const uint8_t ty
  	printf("\t\t * secondary channel offset: %s\n",
  		ht_secondary_offset[data[1] & 0x3]);
  	printf("\t\t * STA channel width: %s\n", sta_chan_width[(data[1] & 0x4)>>2]);
@@ -144,7 +144,7 @@
  	printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3);
  	printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]);
  	printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2);
-@@ -1707,6 +1710,14 @@ static void print_ie(const struct ie_pri
+@@ -1716,6 +1719,14 @@ static void print_ie(const struct ie_pri
  
  static const struct ie_print ieprinters[] = {
  	[0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
@@ -159,7 +159,7 @@
  	[1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
  	[3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), },
  	[5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), },
-@@ -1716,26 +1727,20 @@ static const struct ie_print ieprinters[
+@@ -1725,26 +1736,20 @@ static const struct ie_print ieprinters[
  	[32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), },
  	[35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), },
  	[42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), },
@@ -187,15 +187,15 @@
  };
  
  static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data,
-@@ -2279,6 +2284,7 @@ void print_ies(unsigned char *ie, int ie
+@@ -2326,6 +2331,7 @@ void print_ies(unsigned char *ie, int ie
  		    ieprinters[ie[0]].flags & BIT(ptype)) {
  			print_ie(&ieprinters[ie[0]],
  				 ie[0], ie[1], ie + 2, &ie_buffer);
 +#ifdef IW_FULL
  		} else if (ie[0] == 221 /* vendor */) {
  			print_vendor(ie[1], ie + 2, unknown, ptype);
- 		} else if (unknown) {
-@@ -2288,6 +2294,7 @@ void print_ies(unsigned char *ie, int ie
+ 		} else if (ie[0] == 255 /* extension */) {
+@@ -2337,6 +2343,7 @@ void print_ies(unsigned char *ie, int ie
  			for (i=0; i<ie[1]; i++)
  				printf(" %.2x", ie[2+i]);
  			printf("\n");
@@ -203,7 +203,7 @@
  		}
  		ielen -= ie[1] + 2;
  		ie += ie[1] + 2;
-@@ -2328,6 +2335,7 @@ static void print_capa_non_dmg(__u16 cap
+@@ -2377,6 +2384,7 @@ static void print_capa_non_dmg(__u16 cap
  		printf(" ESS");
  	if (capa & WLAN_CAPABILITY_IBSS)
  		printf(" IBSS");
@@ -211,7 +211,7 @@
  	if (capa & WLAN_CAPABILITY_CF_POLLABLE)
  		printf(" CfPollable");
  	if (capa & WLAN_CAPABILITY_CF_POLL_REQUEST)
-@@ -2356,6 +2364,7 @@ static void print_capa_non_dmg(__u16 cap
+@@ -2405,6 +2413,7 @@ static void print_capa_non_dmg(__u16 cap
  		printf(" DelayedBACK");
  	if (capa & WLAN_CAPABILITY_IMM_BACK)
  		printf(" ImmediateBACK");
@@ -219,7 +219,7 @@
  }
  
  static int print_bss_handler(struct nl_msg *msg, void *arg)
-@@ -2440,8 +2449,10 @@ static int print_bss_handler(struct nl_m
+@@ -2489,8 +2498,10 @@ static int print_bss_handler(struct nl_m
  	if (bss[NL80211_BSS_FREQUENCY]) {
  		int freq = nla_get_u32(bss[NL80211_BSS_FREQUENCY]);
  		printf("\tfreq: %d\n", freq);
@@ -230,7 +230,7 @@
  	}
  	if (bss[NL80211_BSS_BEACON_INTERVAL])
  		printf("\tbeacon interval: %d TUs\n",
-@@ -2635,6 +2646,7 @@ static int handle_stop_sched_scan(struct
+@@ -2684,6 +2695,7 @@ static int handle_stop_sched_scan(struct
  	return 0;
  }
  
@@ -238,7 +238,7 @@
  COMMAND(scan, sched_start,
  	SCHED_SCAN_OPTIONS,
  	NL80211_CMD_START_SCHED_SCAN, 0, CIB_NETDEV, handle_start_sched_scan,
-@@ -2645,3 +2657,4 @@ COMMAND(scan, sched_start,
+@@ -2694,3 +2706,4 @@ COMMAND(scan, sched_start,
  COMMAND(scan, sched_stop, "",
  	NL80211_CMD_STOP_SCHED_SCAN, 0, CIB_NETDEV, handle_stop_sched_scan,
  	"Stop an ongoing scheduled scan.");

package/network/utils/iwinfo/Makefile

@@ -7,25 +7,17 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libiwinfo
-PKG_RELEASE:=1
+PKG_RELEASE:=2.1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/iwinfo.git
-PKG_SOURCE_DATE:=2021-01-31
-PKG_SOURCE_VERSION:=4a32b33e9606f1bc1125f4bc24b0581349e55f2e
-PKG_MIRROR_HASH:=414e5d150efaadba21103e66f862be66a94dcf83c16a2850f7c05051a9b0739d
+PKG_SOURCE_DATE:=2021-04-30
+PKG_SOURCE_VERSION:=c45f0b584b4b86f8250f90ea19afca271c114fa2
+PKG_MIRROR_HASH:=24ad04791254a0523cd15a4fec6116d9ff121e006c93e5e41459f91347b33ec2
 PKG_MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
 PKG_LICENSE:=GPL-2.0
 
-PKG_FLAGS := nonshared
-
-PKG_CONFIG_DEPENDS := \
-	CONFIG_PACKAGE_kmod-brcm-wl \
-	CONFIG_PACKAGE_kmod-brcm-wl-mini \
-	CONFIG_PACKAGE_kmod-brcm-wl-mimo \
-	CONFIG_PACKAGE_kmod-cfg80211
-
-IWINFO_ABI_VERSION:=20210106
+IWINFO_ABI_VERSION:=20210430
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -34,13 +26,13 @@ define Package/libiwinfo
   SECTION:=libs
   CATEGORY:=Libraries
   TITLE:=Generalized Wireless Information Library (iwinfo)
-  DEPENDS:=+PACKAGE_kmod-cfg80211:libnl-tiny +libuci +libubus
+  DEPENDS:=+libnl-tiny +libuci +libubus +libiwinfo-data
   ABI_VERSION:=$(IWINFO_ABI_VERSION)
 endef
 
 define Package/libiwinfo/description
-  Wireless information library with consistent interface for proprietary Broadcom,
-  nl80211 and wext driver interfaces.
+  Wireless information library with simplified API for nl80211
+  and wext driver interfaces.
 endef
 
 
@@ -58,6 +50,12 @@ define Package/libiwinfo-lua/description
 endef
 
 
+define Package/libiwinfo-data
+  TITLE:=libiwinfo Lua binding
+  HIDDEN:=1
+endef
+
+
 define Package/iwinfo
   SECTION:=utils
   CATEGORY:=Utilities
@@ -73,12 +71,6 @@ endef
 define Build/Configure
 endef
 
-IWINFO_BACKENDS := \
-	$(if $(CONFIG_PACKAGE_kmod-brcm-wl),wl) \
-	$(if $(CONFIG_PACKAGE_kmod-brcm-wl-mini),wl) \
-	$(if $(CONFIG_PACKAGE_kmod-brcm-wl-mimo),wl) \
-	$(if $(CONFIG_PACKAGE_kmod-cfg80211),nl80211)
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl-tiny \
 	-I$(STAGING_DIR)/usr/include \
@@ -88,7 +80,7 @@ MAKE_FLAGS += \
 	FPIC="$(FPIC)" \
 	CFLAGS="$(TARGET_CFLAGS)" \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
-	BACKENDS="$(IWINFO_BACKENDS)" \
+	BACKENDS="nl80211" \
 	SOVERSION="$(IWINFO_ABI_VERSION)"
 
 define Build/InstallDev
@@ -104,8 +96,6 @@ endef
 define Package/libiwinfo/install
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libiwinfo.so.$(IWINFO_ABI_VERSION) $(1)/usr/lib/libiwinfo.so.$(IWINFO_ABI_VERSION)
-	$(INSTALL_DIR) $(1)/usr/share/libiwinfo
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/hardware.txt $(1)/usr/share/libiwinfo/hardware.txt
 endef
 
 define Package/libiwinfo-lua/install
@@ -113,6 +103,11 @@ define Package/libiwinfo-lua/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/iwinfo.so $(1)/usr/lib/lua/iwinfo.so
 endef
 
+define Package/libiwinfo-data/install
+	$(INSTALL_DIR) $(1)/usr/share/libiwinfo
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/hardware.txt $(1)/usr/share/libiwinfo/devices.txt
+endef
+
 define Package/iwinfo/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/iwinfo $(1)/usr/bin/iwinfo
@@ -120,4 +115,5 @@ endef
 
 $(eval $(call BuildPackage,libiwinfo))
 $(eval $(call BuildPackage,libiwinfo-lua))
+$(eval $(call BuildPackage,libiwinfo-data))
 $(eval $(call BuildPackage,iwinfo))

package/network/utils/iwinfo/patches/0001-iwinfo-rename-hardware.txt-to-devices.txt.patch

@@ -0,0 +1,26 @@
+From a0a0e02dd91d14a50155390d5fd3b95d6ec87bf4 Mon Sep 17 00:00:00 2001
+From: Jo-Philipp Wich <jo@mein.io>
+Date: Sun, 11 Jul 2021 15:56:35 +0200
+Subject: [PATCH] iwinfo: rename hardware.txt to devices.txt
+
+Signed-off-by: Jo-Philipp Wich <jo@mein.io>
+---
+ include/iwinfo.h            | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/iwinfo.h b/include/iwinfo.h
+index f7097cc..8469ee7 100644
+--- a/include/iwinfo.h
++++ b/include/iwinfo.h
+@@ -255,7 +255,7 @@ struct iwinfo_hardware_entry {
+ 
+ extern const struct iwinfo_iso3166_label IWINFO_ISO3166_NAMES[];
+ 
+-#define IWINFO_HARDWARE_FILE	"/usr/share/libiwinfo/hardware.txt"
++#define IWINFO_HARDWARE_FILE	"/usr/share/libiwinfo/devices.txt"
+ 
+ 
+ struct iwinfo_ops {
+-- 
+2.30.2
+

package/system/ubus/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/ubus.git
-PKG_SOURCE_DATE:=2021-06-03
-PKG_SOURCE_VERSION:=a8cf678230ed163ff7a07eb1e2c872f9d655460a
-PKG_MIRROR_HASH:=aee34cd1c1aa0f1a459dda0b2c6cbdb6b66e67147ebd1bcbb2a16a2ef923d008
+PKG_SOURCE_DATE:=2021-06-30
+PKG_SOURCE_VERSION:=4fc532c8a55ba8217ad67d7fd47c5eb9a8aba044
+PKG_MIRROR_HASH:=a5c8205f2e2b2f1f9ad687592e66a6e2bf8900dc54cfe3ceefe6c297d18971a8
 PKG_ABI_VERSION:=$(call abi_version_str,$(PKG_SOURCE_DATE))
 CMAKE_INSTALL:=1
 
@@ -15,7 +15,6 @@ PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
-PKG_FLAGS := nonshared
 PKG_ASLR_PIE_REGULAR:=1
 
 include $(INCLUDE_DIR)/package.mk

package/system/uci/Makefile

@@ -23,8 +23,6 @@ PKG_LICENSE_FILES:=
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 PKG_BUILD_PARALLEL:=0
-PKG_FLAGS := nonshared
-
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
 

package/utils/bcm27xx-userland/Makefile

@@ -8,16 +8,18 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bcm27xx-userland
-PKG_VERSION:=4a0a19b88b43e48c6b51b526b9378289fb712a4c
+PKG_VERSION:=97bc8180ad682b004ea224d1db7b8e108eda4397
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/raspberrypi/userland/tar.gz/$(PKG_VERSION)?
-PKG_HASH:=0f42d48095d1f680cbe8781c2e974b76bdd0507aaef64cce8b8b472ca3a09588
+PKG_HASH:=d67def03931215f41b741aed5a3a1bc2bd62fa33f5cc14692e9a4d65f2e0ea27
 
 PKG_FLAGS:=nonshared
 
 PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=LICENCE
 
 CMAKE_INSTALL:=1
 CMAKE_OPTIONS+=-DVMCS_INSTALL_PREFIX=/usr
@@ -46,6 +48,19 @@ define Package/bcm27xx-userland/description
   BCM27xx userland tools including vcgencmd and tvservice.
 endef
 
+define Package/bcm27xx-userland-dev
+  SECTION:=devel
+  CATEGORY:=Development
+  SUBMENU:=Libraries
+  DEPENDS:=@TARGET_bcm27xx +bcm27xx-userland
+  TITLE:=Development files of BCM27xx userland tools
+endef
+
+define Package/bcm27xx-userland-dev/description
+  This package contains the header and static libraries of
+  the BCM27xx userland tools.
+endef
+
 define Package/bcm27xx-userland/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtmerge $(1)/usr/bin
@@ -61,11 +76,22 @@ endif
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/vcgencmd $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/vcmailbox $(1)/usr/bin
 
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/*.so $(1)/usr/lib/
+ifneq ($(ARCH),aarch64)
+	$(INSTALL_DIR) $(1)/usr/lib/plugins
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/plugins/ $(1)/usr/lib/
+endif
+endef
+
+define Package/bcm27xx-userland-dev/install
 	$(INSTALL_DIR) $(1)/usr/include
 	$(CP) $(PKG_INSTALL_DIR)/usr/include/ $(1)/usr/
 
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ $(1)/usr/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig $(1)/usr/lib/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/*.a $(1)/usr/lib/
 endef
 
 $(eval $(call BuildPackage,bcm27xx-userland))
+$(eval $(call BuildPackage,bcm27xx-userland-dev))

package/utils/busybox/files/sysntpd

@@ -30,7 +30,12 @@ get_dhcp_ntp_servers() {
 
 validate_ntp_section() {
 	uci_load_validate system timeserver "$1" "$2" \
-		'server:list(host)' 'enabled:bool:1' 'enable_server:bool:0' 'use_dhcp:bool:1' 'dhcp_interface:list(string)'
+		'dhcp_interface:list(string)' \
+		'enable_server:bool:0' \
+		'enabled:bool:1' \
+		'interface:string' \
+		'server:list(host)' \
+		'use_dhcp:bool:1'
 }
 
 start_ntpd_instance() {
@@ -49,7 +54,17 @@ start_ntpd_instance() {
 
 	procd_open_instance
 	procd_set_param command "$PROG" -n -N
-	[ "$enable_server" = "1" ] && procd_append_param command -l
+	if [ "$enable_server" = "1" ]; then
+		procd_append_param command -l
+		[ -n "$interface" ] && {
+			local ifname
+
+			network_get_device ifname "$interface" || \
+				ifname="$interface"
+			procd_append_param command -I "$ifname"
+			procd_append_param netdev "$ifname"
+		}
+	fi
 	[ -x "$HOTPLUG_SCRIPT" ] && procd_append_param command -S "$HOTPLUG_SCRIPT"
 	for peer in $server; do
 		procd_append_param command -p $peer
@@ -71,11 +86,12 @@ start_ntpd_instance() {
 }
 
 start_service() {
+	. /lib/functions/network.sh
 	validate_ntp_section ntp start_ntpd_instance
 }
 
 service_triggers() {
-	local script name use_dhcp
+	local script name use_dhcp enable_server interface
 
 	script=$(readlink -f "$initscript")
 	name=$(basename ${script:-$initscript})
@@ -98,5 +114,17 @@ service_triggers() {
 		fi
 	}
 
+	config_get_bool enable_server ntp enable_server 0
+	config_get interface ntp interface
+
+	[ $enable_server -eq 1 ] && [ -n "$interface" ] && {
+		local ifname
+
+		network_get_device ifname "$interface" || \
+			ifname="$interface"
+		procd_add_interface_trigger "interface.*" "$ifname" \
+			/etc/init.d/"$name" reload
+	}
+
 	procd_add_validation validate_ntp_section
 }

package/utils/fritz-tools/src/fritz_tffs_nand_read.c

@@ -340,7 +340,7 @@ static int show_matching_key_value(struct tffs_key_name_table *key_names)
 	for (uint32_t i = 0; i < key_names->size; i++) {
 		name = key_names->entries[i].val;
 
-		if (strncmp(name, name_filter, strlen(name)) == 0) {
+		if (strcmp(name, name_filter) == 0) {
 			if (find_entry(key_names->entries[i].id, &tmp)) {
 				print_entry_value(&tmp);
 				printf("\n");

package/utils/fritz-tools/src/fritz_tffs_read.c

@@ -204,7 +204,7 @@ static int show_matching_key_value(uint8_t *buffer,
 	for (i = 0; i < key_names->size; i++) {
 		name = key_names->entries[i].val;
 
-		if (strncmp(name, name_filter, strlen(name)) == 0) {
+		if (strcmp(name, name_filter) == 0) {
 			id = to_entry_header_id(*key_names->entries[i].id);
 
 			if (find_entry(buffer, id, &tmp)) {

package/utils/lua/Makefile

@@ -16,7 +16,6 @@ PKG_SOURCE_URL:=http://www.lua.org/ftp/ \
 	http://www.tecgraf.puc-rio.br/lua/ftp/
 PKG_HASH:=2640fc56a795f29d28ef15e13c34a47e223960b0240e8cb0a82d9b0738695333
 PKG_BUILD_PARALLEL:=1
-PKG_FLAGS := nonshared
 
 PKG_LICENSE:=MIT
 PKG_LICENSE_FILES:=COPYRIGHT

package/utils/ugps/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ugps
-PKG_RELEASE:=1
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/ugps.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2020-08-29
-PKG_SOURCE_VERSION:=511a5b3c84fa715ef0305cf26c98619c12a4867a
-PKG_MIRROR_HASH:=551d57b4c18da4c4695fa2f7a959c25a03be35d14cf872785e7db740f12366e2
+PKG_SOURCE_DATE:=2021-06-08
+PKG_SOURCE_VERSION:=5e88403fc0d39ae8a270d2c6c6e9c8a4d5232cf3
+PKG_MIRROR_HASH:=a3dfc2cc6def3b634d8b7cda9139926be3d876cf2faa5251c4821987954442a5
 
 PKG_MAINTAINER:=John Crispin <john@phrozen.org>
 PKG_LICENSE:=GPL-2.0+

package/utils/ugps/files/ugps.init

@@ -16,11 +16,16 @@ start_service() {
 	local disabled="$(uci get gps.@gps[-1].disabled || echo 0)"
 
 	[ "$disabled" == "0" ] || return
+	[ "$tty" ] || return
 
-	[ -c "$tty" ] || {
-		tty="/dev/$tty"
-		[ -c "$tty" ] || return
-	}
+	case "$tty" in
+		"/"*)
+			true
+			;;
+		*)
+			tty="/dev/$tty"
+			;;
+	esac
 
 	procd_open_instance
 	procd_set_param command "$PROG"

scripts/json_overview_image_info.py

@@ -18,19 +18,33 @@ work_dir = Path(getenv("WORK_DIR"))
 
 output = {}
 
+
+def get_initial_output(image_info):
+    # preserve existing profiles.json
+    if output_path.is_file():
+        profiles = json.loads(output_path.read_text())
+        if profiles["version_code"] == image_info["version_code"]:
+            return profiles
+    return image_info
+
+
 for json_file in work_dir.glob("*.json"):
     image_info = json.loads(json_file.read_text())
+
     if not output:
-        output.update(image_info)
+        output = get_initial_output(image_info)
+
+    # get first and only profile in json file
+    device_id, profile = next(iter(image_info["profiles"].items()))
+    if device_id not in output["profiles"]:
+        output["profiles"][device_id] = profile
     else:
-        # get first (and only) profile in json file
-        device_id = next(iter(image_info["profiles"].keys()))
-        if device_id not in output["profiles"]:
-            output["profiles"].update(image_info["profiles"])
-        else:
-            output["profiles"][device_id]["images"].append(
-                image_info["profiles"][device_id]["images"][0]
-            )
+        output["profiles"][device_id]["images"].extend(profile["images"])
+
+# make image lists unique by name, keep last/latest
+for device_id, profile in output.get("profiles", {}).items():
+    profile["images"] = list({e["name"]: e for e in profile["images"]}.values())
+
 
 if output:
     default_packages, output["arch_packages"] = run(

target/linux/apm821xx/dts/wd-mybooklive.dts

@@ -123,24 +123,6 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
-
-	sata1pwr: sata1-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "Power Drive Port 1";
-		gpios = <&GPIO1 3 GPIO_ACTIVE_LOW>;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on; /* needed to read OS from HDD */
-	};
-
-	sata0pwr: sata0-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "Power Drive Port 0";
-		gpios = <&GPIO1 7 GPIO_ACTIVE_LOW>;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on; /* needed to read OS from HDD */
-	};
 };
 
 &EMAC0 {

target/linux/apm821xx/patches-5.4/802-usb-xhci-force-msi-renesas-xhci.patch

@@ -43,7 +43,7 @@ produce a noisy warning.
  		hcd->msi_enabled = 1;
 --- a/drivers/usb/host/xhci.h
 +++ b/drivers/usb/host/xhci.h
-@@ -1883,6 +1883,7 @@ struct xhci_hcd {
+@@ -1887,6 +1887,7 @@ struct xhci_hcd {
  	struct xhci_hub		usb2_rhub;
  	struct xhci_hub		usb3_rhub;
  	/* support xHCI 1.0 spec USB2 hardware LPM */

target/linux/archs38/config-5.4

@@ -50,7 +50,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_SCSI_REQUEST=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED=y
 CONFIG_CC_HAS_KASAN_GENERIC=y