编译脚本

Changelog: https://github.com/openwrt/rtl8126/compare/10.014.01...10.015.00

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit 3d3328bf5f)

.github/workflows/Dockerfile.tools

@@ -1,4 +0,0 @@
-FROM ghcr.io/openwrt/buildbot/buildworker-v3.8.0:v2
-
-COPY --chown=buildbot staging_dir/host /prebuilt_tools/staging_dir/host
-COPY --chown=buildbot build_dir/host /prebuilt_tools/build_dir/host

.github/workflows/build-tools.yml

@@ -1,72 +0,0 @@
-name: Build host tools
-
-on:
-  workflow_call:
-    inputs:
-      generate_prebuilt_artifacts:
-        type: boolean
-
-permissions:
-  contents: read
-
-jobs:
-  build:
-    name: Build tools
-    runs-on: ubuntu-latest
-    container: ghcr.io/openwrt/buildbot/buildworker-v3.8.0:v2
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          path: openwrt
-
-      - name: Fix permission
-        run: chown -R buildbot:buildbot openwrt
-
-      - name: Set configs for tools container
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          touch .config
-          echo CONFIG_DEVEL=y >> .config
-          echo CONFIG_AUTOREMOVE=y >> .config
-          echo CONFIG_CCACHE=y >> .config
-
-      - name: Make prereq
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make defconfig
-
-      - name: Build tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Upload logs
-        if: always()
-        uses: actions/upload-artifact@v3
-        with:
-          name: linux-buildbot-logs
-          path: openwrt/logs
-
-      - name: Upload config
-        if: always()
-        uses: actions/upload-artifact@v3
-        with:
-          name: linux-buildbot-config
-          path: openwrt/.config
-
-      - name: Archive prebuilt tools
-        if: inputs.generate_prebuilt_artifacts == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: tar -cf tools.tar staging_dir/host build_dir/host
-
-      - name: Upload prebuilt tools
-        if: inputs.generate_prebuilt_artifacts == true
-        uses: actions/upload-artifact@v3
-        with:
-          name: linux-buildbot-prebuilt-tools
-          path: openwrt/tools.tar
-          retention-days: 1

.github/workflows/build.yml

@@ -1,435 +0,0 @@
-name: Build sub target
-
-on:
-  workflow_call:
-    secrets:
-      coverity_api_token:
-    inputs:
-      target:
-        required: true
-        type: string
-      subtarget:
-        required: true
-        type: string
-      testing:
-        type: boolean
-      build_toolchain:
-        type: boolean
-      include_feeds:
-        type: boolean
-      build_full:
-        type: boolean
-      build_kernel:
-        type: boolean
-      build_all_modules:
-        type: boolean
-      build_all_kmods:
-        type: boolean
-      build_all_boards:
-        type: boolean
-      use_openwrt_container:
-        type: boolean
-        default: true
-      coverity_project_name:
-        type: string
-        default: OpenWrt
-      coverity_check_packages:
-        type: string
-      coverity_compiler_template_list:
-        type: string
-        default: >-
-          arm-openwrt-linux-gcc
-      coverity_force_compile_packages:
-        type: string
-        default: >-
-          curl
-          libnl
-          mbedtls
-          wolfssl
-          openssl
-
-permissions:
-  contents: read
-
-jobs:
-  setup_build:
-    name: Setup build ${{ inputs.target }}/${{ inputs.subtarget }}
-    runs-on: ubuntu-latest
-    outputs:
-      owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
-      ccache_hash: ${{ steps.ccache_hash.outputs.ccache_hash }}
-      container_tag: ${{ steps.determine_tools_container.outputs.container_tag }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-
-      - name: Set lower case owner name
-        id: lower_owner
-        run: |
-          OWNER_LC=$(echo "${{ github.repository_owner }}" \
-            | tr '[:upper:]' '[:lower:]')
-
-          if [ ${{ inputs.use_openwrt_container }} == "true" ]; then
-            OWNER_LC=openwrt
-          fi
-
-          echo "owner_lc=$OWNER_LC" >> $GITHUB_OUTPUT
-
-      - name: Generate ccache hash
-        id: ccache_hash
-        run: |
-          CCACHE_HASH=$(md5sum include/kernel-* | awk '{ print $1 }' \
-           | md5sum | awk '{ print $1 }')
-          echo "ccache_hash=$CCACHE_HASH" >> $GITHUB_OUTPUT
-
-      # Per branch tools container tag
-      # By default stick to latest
-      # For official test targetting openwrt stable branch
-      # Get the branch or parse the tag and push dedicated tools containers
-      # For local test to use the correct container for stable release testing
-      # you need to use for the branch name a prefix of openwrt-[0-9][0-9].[0-9][0-9]-
-      - name: Determine tools container tag
-        id: determine_tools_container
-        run: |
-          CONTAINER_TAG=latest
-          if [ -n "${{ github.base_ref }}" ]; then
-            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              CONTAINER_TAG="${{ github.base_ref }}"
-            fi
-          elif [ ${{ github.ref_type }} == "branch" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              CONTAINER_TAG=${{ github.ref_name }}
-            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
-              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\)-.*/\1/')"
-            fi
-          elif [ ${{ github.ref_type }} == "tag" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
-              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/^v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
-            fi
-          fi
-          echo "Tools container to use tools:$CONTAINER_TAG"
-          echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
-
-  build:
-    name: Build ${{ inputs.target }}/${{ inputs.subtarget }}
-    needs: setup_build
-    runs-on: ubuntu-latest
-
-    container: ghcr.io/${{ needs.setup_build.outputs.owner_lc }}/tools:${{ needs.setup_build.outputs.container_tag }}
-
-    permissions:
-      contents: read
-      packages: read
-
-    steps:
-      - name: Checkout master directory
-        uses: actions/checkout@v3
-        with:
-          path: openwrt
-
-      - name: Checkout packages feed
-        if: inputs.include_feeds == true
-        uses: actions/checkout@v3
-        with:
-          repository: openwrt/packages
-          path: openwrt/feeds/packages
-
-      - name: Checkout luci feed
-        if: inputs.include_feeds == true
-        uses: actions/checkout@v3
-        with:
-          repository: openwrt/luci
-          path: openwrt/feeds/luci
-
-      - name: Checkout routing feed
-        if: inputs.include_feeds == true
-        uses: actions/checkout@v3
-        with:
-          repository: openwrt/routing
-          path: openwrt/feeds/routing
-
-      - name: Checkout telephony feed
-        if: inputs.include_feeds == true
-        uses: actions/checkout@v3
-        with:
-          repository: openwrt/telephony
-          path: openwrt/feeds/telephony
-
-      - name: Parse toolchain file
-        if: inputs.build_toolchain == false
-        id: parse-toolchain
-        working-directory: openwrt
-        run: |
-          TOOLCHAIN_PATH=snapshots
-
-          if [ -n "${{ github.base_ref }}" ]; then
-            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              major_ver="$(echo ${{ github.base_ref }} | sed 's/^openwrt-/v/')"
-            fi
-          elif [ "${{ github.ref_type }}" = "branch" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              major_ver="$(echo ${{ github.ref_name }} | sed 's/^openwrt-/v/')"
-            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
-              major_ver="$(echo ${{ github.ref_name }} | sed 's/^openwrt-\([0-9][0-9]\.[0-9][0-9]\)-.*/v\1/')"
-            fi
-          elif [ "${{ github.ref_type }}" = "tag" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
-              major_ver="$(echo ${{ github.ref_name }} | sed 's/^\(v[0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
-            fi
-          fi
-
-          if [ -n "$major_ver" ]; then
-            git fetch --tags -f
-            latest_tag="$(git tag --sort=-creatordate -l $major_ver* | head -n1)"
-            if [ -n "$latest_tag" ]; then
-              TOOLCHAIN_PATH=releases/$(echo $latest_tag | sed 's/^v//')
-            fi
-          fi
-
-          SUMS_FILE="https://downloads.cdn.openwrt.org/$TOOLCHAIN_PATH/targets/${{ inputs.target }}/${{ inputs.subtarget }}/sha256sums"
-          if curl $SUMS_FILE | grep -q ".*openwrt-toolchain.*tar.xz"; then
-            TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-toolchain.*tar.xz")"
-            TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-toolchain.*\).tar.xz/\1/p')
-            
-            echo "toolchain-type=external_toolchain" >> $GITHUB_OUTPUT
-          elif curl $SUMS_FILE | grep -q ".*openwrt-sdk.*tar.xz"; then
-            TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-sdk.*tar.xz")"
-            TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-sdk.*\).tar.xz/\1/p')
-
-            echo "toolchain-type=external_sdk" >> $GITHUB_OUTPUT
-          else
-            echo "toolchain-type=internal" >> $GITHUB_OUTPUT
-          fi
-
-          echo "TOOLCHAIN_FILE=$TOOLCHAIN_FILE" >> "$GITHUB_ENV"
-          echo "TOOLCHAIN_PATH=$TOOLCHAIN_PATH" >> "$GITHUB_ENV"
-
-      - name: Fix permission
-        run: |
-          chown -R buildbot:buildbot openwrt
-
-      - name: Prepare prebuilt tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          mkdir -p staging_dir build_dir
-          ln -s /prebuilt_tools/staging_dir/host staging_dir/host
-          ln -s /prebuilt_tools/build_dir/host build_dir/host
-
-          ./scripts/ext-tools.sh --refresh
-
-      - name: Update & Install feeds
-        if: inputs.include_feeds == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          ./scripts/feeds update -a
-          ./scripts/feeds install -a
-
-      - name: Cache ccache
-        uses: actions/cache@v3
-        with:
-          path: openwrt/.ccache
-          key: ccache-kernel-${{ inputs.target }}/${{ inputs.subtarget }}-${{ needs.setup_build.outputs.ccache_hash }}
-          restore-keys: |
-            ccache-kernel-${{ inputs.target }}/${{ inputs.subtarget }}-
-
-      - name: Download external toolchain/sdk
-        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type != 'internal'
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          wget -O - https://downloads.cdn.openwrt.org/${{ env.TOOLCHAIN_PATH }}/targets/${{ inputs.target }}/${{ inputs.subtarget }}/${{ env.TOOLCHAIN_FILE }}.tar.xz \
-            | tar --xz -xf -
-
-      - name: Configure testing kernel
-        if: inputs.testing == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_TESTING_KERNEL=y >> .config
-
-      - name: Configure all kernel modules
-        if: inputs.build_all_kmods == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_ALL_KMODS=y >> .config
-
-      - name: Configure all modules
-        if: inputs.build_all_modules == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_ALL=y >> .config
-
-      - name: Configure all boards
-        if: inputs.build_all_boards == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_TARGET_MULTI_PROFILE=y >> .config
-          echo CONFIG_TARGET_PER_DEVICE_ROOTFS=y >> .config
-          echo CONFIG_TARGET_ALL_PROFILES=y >> .config
-
-      - name: Configure external toolchain
-        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_toolchain'
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_DEVEL=y >> .config
-          echo CONFIG_AUTOREMOVE=y >> .config
-          echo CONFIG_CCACHE=y >> .config
-
-          ./scripts/ext-toolchain.sh \
-            --toolchain ${{ env.TOOLCHAIN_FILE }}/toolchain-* \
-            --overwrite-config \
-            --config ${{ inputs.target }}/${{ inputs.subtarget }}
-
-      - name: Adapt external sdk to external toolchain format
-        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk'
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          TOOLCHAIN_DIR=${{ env.TOOLCHAIN_FILE }}/staging_dir/$(ls ${{ env.TOOLCHAIN_FILE }}/staging_dir | grep toolchain)
-          TOOLCHAIN_BIN=$TOOLCHAIN_DIR/bin
-          OPENWRT_DIR=$(pwd)
-
-          # Find target name from toolchain info.mk
-          GNU_TARGET_NAME=$(cat $TOOLCHAIN_DIR/info.mk | grep TARGET_CROSS | sed 's/^TARGET_CROSS=\(.*\)-$/\1/')
-
-          cd $TOOLCHAIN_BIN
-
-          # Revert sdk wrapper scripts applied to all the bins
-          for app in $(find . -name "*.bin"); do
-            TARGET_APP=$(echo $app | sed 's/\.\/\.\(.*\)\.bin/\1/')
-            rm $TARGET_APP
-            mv .$TARGET_APP.bin $TARGET_APP
-          done
-
-          # Setup the wrapper script in the sdk toolchain dir simulating an external toolchain build
-          cp $OPENWRT_DIR/target/toolchain/files/wrapper.sh $GNU_TARGET_NAME-wrapper.sh
-          for app in cc gcc g++ c++ cpp ld as ; do
-            [ -f $GNU_TARGET_NAME-$app ] && mv $GNU_TARGET_NAME-$app $GNU_TARGET_NAME-$app.bin
-            ln -sf $GNU_TARGET_NAME-wrapper.sh $GNU_TARGET_NAME-$app
-          done
-
-      - name: Configure external toolchain with sdk
-        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk'
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_DEVEL=y >> .config
-          echo CONFIG_AUTOREMOVE=y >> .config
-          echo CONFIG_CCACHE=y >> .config
-
-          ./scripts/ext-toolchain.sh \
-            --toolchain ${{ env.TOOLCHAIN_FILE }}/staging_dir/toolchain-* \
-            --overwrite-config \
-            --config ${{ inputs.target }}/${{ inputs.subtarget }}
-
-      - name: Configure internal toolchain
-        if: inputs.build_toolchain == true || steps.parse-toolchain.outputs.toolchain-type == 'internal'
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_DEVEL=y >> .config
-          echo CONFIG_AUTOREMOVE=y >> .config
-          echo CONFIG_CCACHE=y >> .config
-
-          echo "CONFIG_TARGET_${{ inputs.target }}=y" >> .config
-          echo "CONFIG_TARGET_${{ inputs.target }}_${{ inputs.subtarget }}=y" >> .config
-
-          make defconfig
-
-      - name: Show configuration
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: ./scripts/diffconfig.sh
-
-      - name: Build tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Build toolchain
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make toolchain/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Build Kernel
-        if: inputs.build_kernel == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make target/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Build Kernel Kmods
-        if: inputs.build_kernel == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make package/linux/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Build everything
-        if: inputs.build_full == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Coverity prepare toolchain
-        if: inputs.coverity_check_packages != ''
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          wget -q https://scan.coverity.com/download/linux64 --post-data "token=${{ secrets.coverity_api_token }}&project=${{ inputs.coverity_project_name }}" -O coverity.tar.gz
-          wget -q https://scan.coverity.com/download/linux64 --post-data "token=${{ secrets.coverity_api_token }}&project=${{ inputs.coverity_project_name }}&md5=1" -O coverity.tar.gz.md5
-          echo ' coverity.tar.gz' >> coverity.tar.gz.md5
-          md5sum -c coverity.tar.gz.md5
-
-          mkdir cov-analysis-linux64
-          tar xzf coverity.tar.gz --strip 1 -C cov-analysis-linux64
-          export PATH=$(pwd)/cov-analysis-linux64/bin:$PATH
-
-          for template in ${{ inputs.coverity_compiler_template_list }}; do
-            cov-configure --template --comptype gcc --compiler "$template"
-          done
-
-      - name: Clean and recompile packages with Coverity toolchain
-        if: inputs.coverity_check_packages != ''
-        shell: su buildbot -c "bash {0}"
-        working-directory: openwrt
-        run: |
-          set -o pipefail -o errexit
-
-          coverity_check_packages=(${{ inputs.coverity_check_packages }})
-          printf -v clean_packages "package/%s/clean " "${coverity_check_packages[@]}"
-          make -j$(nproc) BUILD_LOG=1 $clean_packages || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-          coverity_force_compile_packages=(${{ inputs.coverity_force_compile_packages }})
-          printf -v force_compile_packages "package/%s/compile " "${coverity_force_compile_packages[@]}"
-          make -j$(nproc) BUILD_LOG=1 $force_compile_packages || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-          printf -v compile_packages "package/%s/compile " "${coverity_check_packages[@]}"
-          export PATH=$(pwd)/cov-analysis-linux64/bin:$PATH
-          cov-build --dir cov-int make -j $(nproc) BUILD_LOG=1 $compile_packages || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Upload build to Coverity for analysis
-        if: inputs.coverity_check_packages != ''
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          tar czf cov-int.tar.gz ./cov-int
-          curl \
-            --form token="${{ secrets.coverity_api_token }}" \
-            --form email="contact@openwrt.org" \
-            --form file=@cov-int.tar.gz \
-            --form version="${{ github.ref_name }}-${{ github.sha }}" \
-            --form description="OpenWrt ${{ github.ref_name }}-${{ github.sha }}" \
-            "https://scan.coverity.com/builds?project=${{ inputs.coverity_project_name }}"
-
-      - name: Upload logs
-        if: failure()
-        uses: actions/upload-artifact@v3
-        with:
-          name: ${{ inputs.target }}-${{ inputs.subtarget }}-logs
-          path: "openwrt/logs"

.github/workflows/check-kernel-patches.yml

@@ -1,155 +0,0 @@
-name: Refresh kernel for target
-
-on:
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      subtarget:
-        required: true
-        type: string
-      testing:
-        type: boolean
-      use_openwrt_container:
-        type: boolean
-        default: true
-
-permissions:
-  contents: read
-
-jobs:
-  setup_build:
-    name: Setup build
-    runs-on: ubuntu-latest
-    outputs:
-      owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
-      container_tag: ${{ steps.determine_tools_container.outputs.container_tag }}
-
-    steps:
-      - name: Set lower case owner name
-        id: lower_owner
-        run: |
-          OWNER_LC=$(echo "${{ github.repository_owner }}" \
-            | tr '[:upper:]' '[:lower:]')
-
-          if [ ${{ inputs.use_openwrt_container }} == "true" ]; then
-            OWNER_LC=openwrt
-          fi
-
-          echo "owner_lc=$OWNER_LC" >> $GITHUB_OUTPUT
-
-      # Per branch tools container tag
-      # By default stick to latest
-      # For official test targetting openwrt stable branch
-      # Get the branch or parse the tag and push dedicated tools containers
-      # For local test to use the correct container for stable release testing
-      # you need to use for the branch name a prefix of openwrt-[0-9][0-9].[0-9][0-9]-
-      - name: Determine tools container tag
-        id: determine_tools_container
-        run: |
-          CONTAINER_TAG=latest
-          if [ -n "${{ github.base_ref }}" ]; then
-            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              CONTAINER_TAG="${{ github.base_ref }}"
-            fi
-          elif [ ${{ github.ref_type }} == "branch" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              CONTAINER_TAG=${{ github.ref_name }}
-            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
-              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\)-.*/\1/')"
-            fi
-          elif [ ${{ github.ref_type }} == "tag" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
-              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/^v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
-            fi
-          fi
-          echo "Tools container to use tools:$CONTAINER_TAG"
-          echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
-
-  check-patch:
-    name: Check Kernel patches
-    needs: setup_build
-    runs-on: ubuntu-latest
-
-    container: ghcr.io/${{ needs.setup_build.outputs.owner_lc }}/tools:${{ needs.setup_build.outputs.container_tag }}
-
-    permissions:
-      contents: read
-      packages: read
-
-    steps:
-      - name: Checkout master directory
-        uses: actions/checkout@v3
-        with:
-          path: openwrt
-
-      - name: Fix permission
-        run: |
-          chown -R buildbot:buildbot openwrt
-
-      - name: Prepare prebuilt tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          mkdir -p staging_dir build_dir
-          ln -sf /prebuilt_tools/staging_dir/host staging_dir/host
-          ln -sf /prebuilt_tools/build_dir/host build_dir/host
-
-          ./scripts/ext-tools.sh --refresh
-
-      - name: Configure testing kernel
-        if: inputs.testing == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_TESTING_KERNEL=y >> .config
-
-      - name: Configure system
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_ALL_KMODS=y >> .config
-          echo CONFIG_DEVEL=y >> .config
-          echo CONFIG_AUTOREMOVE=y >> .config
-          echo CONFIG_CCACHE=y >> .config
-
-          echo "CONFIG_TARGET_${{ inputs.target }}=y" >> .config
-          echo "CONFIG_TARGET_${{ inputs.target }}_${{ inputs.subtarget }}=y" >> .config
-
-          make defconfig
-
-      - name: Build tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make tools/quilt/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Refresh Kernel patches
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make target/linux/refresh V=s
-
-      - name: Validate Refreshed Kernel Patches
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          . .github/workflows/scripts/ci_helpers.sh
-
-          if git diff --name-only --exit-code; then
-            success "Kernel patches for ${{ inputs.target }}/${{ inputs.subtarget }} seems ok"
-          else
-            err "Kernel patches for ${{ inputs.target }}/${{ inputs.subtarget }} require refresh. (run 'make target/linux/refresh' and force push this pr)"
-            err "You can also check the provided artifacts with the refreshed patch from this CI run."
-            mkdir ${{ inputs.target }}-${{ inputs.subtarget }}-refreshed
-            for f in $(git diff --name-only); do
-              cp --parents $f ${{ inputs.target }}-${{ inputs.subtarget }}-refreshed/
-            done
-            exit 1
-          fi
-
-      - name: Upload Refreshed Patches
-        if: failure()
-        uses: actions/upload-artifact@v3
-        with:
-          name: ${{ inputs.target }}-${{ inputs.subtarget }}-refreshed
-          path: openwrt/${{ inputs.target }}-${{ inputs.subtarget }}-refreshed

.github/workflows/coverity.yml

@@ -15,51 +15,5 @@ jobs:
     permissions:
       contents: read
       packages: read
-    uses: ./.github/workflows/build.yml
-    with:
-      target: x86
-      subtarget: 64
-      build_full: true
-      include_feeds: true
-      coverity_compiler_template_list: >-
-        x86_64-openwrt-linux-gcc
-        x86_64-openwrt-linux-musl-gcc
-      #  qosify fails to build with cov-build
-      coverity_check_packages: >-
-        cgi-io
-        dnsmasq
-        dropbear
-        firewall
-        fstools
-        fwtool
-        iwinfo
-        jsonfilter
-        libnl-tiny
-        libubox
-        mtd
-        netifd
-        odhcp6c
-        odhcpd
-        opkg
-        procd
-        relayd
-        rpcd
-        swconfig
-        ubox
-        ubus
-        ucert
-        uci
-        uclient
-        ucode
-        ugps
-        uhttpd
-        umbim
-        umdns
-        unetd
-        uqmi
-        urngd
-        usbmode
-        usign
-        usteer
-        ustp
-        ustream-ssl
+      actions: write
+    uses: openwrt/actions-shared-workflows/.github/workflows/coverity.yml@main

.github/workflows/github-release.yml

@@ -0,0 +1,24 @@
+name: Create GitHub release
+
+permissions:
+  contents: write
+
+on:
+  push:
+    tags:
+      - "v*"
+  workflow_dispatch:
+
+jobs:
+  release:
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Release
+        uses: softprops/action-gh-release@v1
+        with:
+          draft: true
+          prerelease: true

.github/workflows/kernel.yml

@@ -17,6 +17,8 @@ on:
       - 'include/kernel*'
       - 'package/kernel/**'
       - 'target/linux/**'
+    branches-ignore:
+      - master
 
 permissions:
   contents: read
@@ -26,106 +28,15 @@ concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}
 
 jobs:
-  determine_targets:
-    name: Set targets
-    runs-on: ubuntu-latest
-    outputs:
-      targets_subtargets: ${{ steps.find_targets.outputs.targets_subtargets }}
-      targets: ${{ steps.find_targets.outputs.targets }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          fetch-depth: 2
-
-      - name: Get changed files
-        id: changed-files
-        uses: tj-actions/changed-files@v35
-
-      - name: Set targets
-        id: find_targets
-        run: |
-          ALL_TARGETS="$(perl ./scripts/dump-target-info.pl targets 2>/dev/null)"
-          CHANGED_FILES="$(echo ${{ steps.changed-files.outputs.all_changed_files }} | tr ' ' '\n')"
-
-          TARGETS_SUBTARGETS="$(echo "$ALL_TARGETS" | sort -u -t '/' -k1 | awk '{ print $1 }')"
-          TARGETS="$(echo "$ALL_TARGETS" | sort -u -t '/' -k1,1 | awk '{ print $1 }')"
-
-          # On testing non-specific target, skip testing each subtarget
-          if echo "$CHANGED_FILES" | grep -v -q target/linux ||
-            echo "$CHANGED_FILES" | grep -q target/linux/generic; then
-            TARGETS_SUBTARGETS=$TARGETS
-          fi
-
-          JSON_TARGETS_SUBTARGETS='['
-          FIRST=1
-          for TARGET in $TARGETS_SUBTARGETS; do
-            if echo "$CHANGED_FILES" | grep -v -q target/linux ||
-              echo "$CHANGED_FILES" | grep -q target/linux/generic ||
-              echo "$CHANGED_FILES" | grep -q $(echo $TARGET | cut -d "/" -f 1); then
-              TUPLE='{"target":"'"$(echo $TARGET | cut -d "/" -f 1)"'","subtarget":"'"$(echo $TARGET | cut -d "/" -f 2)"'"}'
-              [[ $FIRST -ne 1 ]] && JSON_TARGETS_SUBTARGETS="$JSON_TARGETS_SUBTARGETS"','
-              JSON_TARGETS_SUBTARGETS="$JSON_TARGETS_SUBTARGETS""$TUPLE"
-              FIRST=0
-            fi
-          done
-          JSON_TARGETS_SUBTARGETS="$JSON_TARGETS_SUBTARGETS"']'
-
-          JSON_TARGETS='['
-          FIRST=1
-          for TARGET in $TARGETS; do
-            if echo "$CHANGED_FILES" | grep -v -q target/linux ||
-              echo "$CHANGED_FILES" | grep -q target/linux/generic ||
-              echo "$CHANGED_FILES" | grep -q $(echo $TARGET | cut -d "/" -f 1); then
-              TUPLE='{"target":"'"$(echo $TARGET | cut -d "/" -f 1)"'","subtarget":"'"$(echo $TARGET | cut -d "/" -f 2)"'"}'
-              [[ $FIRST -ne 1 ]] && JSON_TARGETS="$JSON_TARGETS"','
-              JSON_TARGETS="$JSON_TARGETS""$TUPLE"
-              FIRST=0
-            fi
-          done
-          JSON_TARGETS="$JSON_TARGETS"']'
-
-          echo -e "\n---- targets to build ----\n"
-          echo "$JSON_TARGETS_SUBTARGETS"
-          echo -e "\n---- targets to build ----\n"
-
-          echo -e "\n---- targets to check patch ----\n"
-          echo "$JSON_TARGETS"
-          echo -e "\n---- targets to check patch ----\n"
-
-          echo "targets_subtargets=$JSON_TARGETS_SUBTARGETS" >> $GITHUB_OUTPUT
-          echo "targets=$JSON_TARGETS" >> $GITHUB_OUTPUT
-
-  build:
-    name: Build Kernel with external toolchain
-    needs: determine_targets
+  build-kernels:
+    name: Build all affected Kernels
     permissions:
       contents: read
       packages: read
-    strategy:
-       fail-fast: False
-       matrix:
-         include: ${{fromJson(needs.determine_targets.outputs.targets_subtargets)}}
-    uses: ./.github/workflows/build.yml
-    with:
-      target: ${{ matrix.target }}
-      subtarget: ${{ matrix.subtarget }}
-      build_kernel: true
-      build_all_kmods: true
-
-  check-kernel-patches:
-    name: Check Kernel patches
-    needs: determine_targets
-    permissions:
-      contents: read
-      packages: read
-    strategy:
-       fail-fast: False
-       matrix:
-         include: ${{fromJson(needs.determine_targets.outputs.targets)}}
-    uses: ./.github/workflows/check-kernel-patches.yml
-    with:
-      target: ${{ matrix.target }}
-      subtarget: ${{ matrix.subtarget }}
-
+      actions: write
+    secrets:
+      ccache_s3_endpoint: ${{ secrets.CCACHE_S3_ENDPOINT }}
+      ccache_s3_bucket: ${{ secrets.CCACHE_S3_BUCKET }}
+      ccache_s3_access_key: ${{ secrets.CCACHE_S3_ACCESS_KEY }}
+      ccache_s3_secret_key: ${{ secrets.CCACHE_S3_SECRET_KEY }}
+    uses: openwrt/actions-shared-workflows/.github/workflows/kernel.yml@main

.github/workflows/label-kernel.yml

@@ -7,44 +7,10 @@ on:
       - labeled
 
 jobs:
-  set_target:
-    if: startsWith(github.event.label.name, 'ci:kernel:')
-    name: Set target
-    runs-on: ubuntu-latest
-    outputs:
-      target: ${{ steps.set_target.outputs.target }}
-      subtarget: ${{ steps.set_target.outputs.subtarget }}
-
-    steps:
-      - name: Set target
-        id: set_target
-        env:
-          CI_EVENT_LABEL_NAME: ${{ github.event.label.name }}
-        run: |
-          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/target=\1/p' | tee --append $GITHUB_OUTPUT
-          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/subtarget=\2/p' | tee --append $GITHUB_OUTPUT
-
-  build_kernel:
-    name: Build Kernel with external toolchain
-    needs: set_target
+  build-kernels-label:
+    name: Build all affected Kernels from defined label
     permissions:
       contents: read
       packages: read
-    uses: ./.github/workflows/build.yml
-    with:
-      container_name: toolchain
-      target: ${{ needs.set_target.outputs.target }}
-      subtarget: ${{ needs.set_target.outputs.subtarget }}
-      build_kernel: true
-      build_all_kmods: true
-
-  check-kernel-patches:
-    name: Check Kernel patches
-    needs: set_target
-    permissions:
-      contents: read
-      packages: read
-    uses: ./.github/workflows/check-kernel-patches.yml
-    with:
-      target: ${{ needs.set_target.outputs.target }}
-      subtarget: ${{ needs.set_target.outputs.subtarget }}
+      actions: write
+    uses: openwrt/actions-shared-workflows/.github/workflows/label-kernel.yml@main

.github/workflows/label-target.yml

@@ -7,35 +7,10 @@ on:
       - labeled
 
 jobs:
-  set_target:
-    if: startsWith(github.event.label.name, 'ci:target:')
-    name: Set target
-    runs-on: ubuntu-latest
-    outputs:
-      target: ${{ steps.set_target.outputs.target }}
-      subtarget: ${{ steps.set_target.outputs.subtarget }}
-
-    steps:
-      - name: Set target
-        id: set_target
-        env:
-          CI_EVENT_LABEL_NAME: ${{ github.event.label.name }}
-        run: |
-          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/target=\1/p' | tee --append $GITHUB_OUTPUT
-          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/subtarget=\2/p' | tee --append $GITHUB_OUTPUT
-
-  build_target:
-    name: Build target
-    needs: set_target
+  build-target-label:
+    name: Build target from defined label
     permissions:
       contents: read
       packages: read
-    uses: ./.github/workflows/build.yml
-    with:
-      container_name: toolchain
-      target: ${{ needs.set_target.outputs.target }}
-      subtarget: ${{ needs.set_target.outputs.subtarget }}
-      build_full: true
-      build_all_kmods: true
-      build_all_boards: true
-      build_all_modules: true
+      actions: write
+    uses: openwrt/actions-shared-workflows/.github/workflows/label-target.yml@main

.github/workflows/packages.yml

@@ -3,7 +3,6 @@ name: Build all core packages
 on:
   pull_request:
     paths:
-      - '.github/workflows/build.yml'
       - '.github/workflows/packages.yml'
       - 'config/**'
       - 'include/**'
@@ -12,13 +11,14 @@ on:
       - 'toolchain/**'
   push:
     paths:
-      - '.github/workflows/build.yml'
       - '.github/workflows/packages.yml'
       - 'config/**'
       - 'include/**'
       - 'package/**'
       - 'target/linux/generic/**'
       - 'toolchain/**'
+    branches-ignore:
+      - master
 
 permissions:
   contents: read
@@ -28,25 +28,15 @@ concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}
 
 jobs:
-  build:
-    name: Build Packages with external toolchain
+  build-packages:
+    name: Build all core packages for selected target
     permissions:
       contents: read
       packages: read
-    strategy:
-      fail-fast: False
-      matrix:
-        include:
-          - target: malta
-            subtarget: be
-          - target: x86
-            subtarget: 64
-    uses: ./.github/workflows/build.yml
-    with:
-      target: ${{ matrix.target }}
-      subtarget: ${{ matrix.subtarget }}
-      build_kernel: true
-      build_all_kmods: true
-      build_all_modules: true
-      build_full: true
-
+      actions: write
+    secrets:
+      ccache_s3_endpoint: ${{ secrets.CCACHE_S3_ENDPOINT }}
+      ccache_s3_bucket: ${{ secrets.CCACHE_S3_BUCKET }}
+      ccache_s3_access_key: ${{ secrets.CCACHE_S3_ACCESS_KEY }}
+      ccache_s3_secret_key: ${{ secrets.CCACHE_S3_SECRET_KEY }}
+    uses: openwrt/actions-shared-workflows/.github/workflows/packages.yml@main

.github/workflows/push-containers.yml

@@ -6,9 +6,10 @@ on:
       - 'include/version.mk'
       - 'include/cmake.mk'
       - 'tools/**'
-      - '.github/workflows/build-tools.yml'
       - '.github/workflows/push-containers.yml'
-      - '.github/workflows/Dockerfile.tools'
+      - 'toolchain/**'
+    branches-ignore:
+      - master
 
 permissions:
   contents: read
@@ -18,81 +19,10 @@ concurrency:
   cancel-in-progress: true
 
 jobs:
-  build-linux-buildbot:
-    name: Build tools with buildbot container
-    if: ${{ github.repository_owner  == 'openwrt' }}
-    uses: ./.github/workflows/build-tools.yml
-    with:
-      generate_prebuilt_artifacts: true
-
-  push-tools-container:
-    needs: build-linux-buildbot
-    name: Push prebuilt tools container
-    if: ${{ github.repository_owner  == 'openwrt' }}
-    runs-on: ubuntu-latest
-
+  build-push-containers:
+    name: Build and Push all prebuilt containers
     permissions:
       contents: read
       packages: write
-
-    steps:
-      - name: Set lower case owner name
-        env:
-          OWNER: ${{ github.repository_owner }}
-        run: |
-          echo "OWNER_LC=${OWNER,,}" >> "$GITHUB_ENV"
-
-      # Per branch tools container tag
-      # By default stick to latest
-      # For official test targetting openwrt stable branch
-      # Get the branch or parse the tag and push dedicated tools containers
-      # Any branch that will match this pattern openwrt-[0-9][0-9].[0-9][0-9]
-      # will refresh the tools container with the matching tag.
-      # (example branch openwrt-22.03 -> tools:openwrt-22.03)
-      # (example branch openwrt-22.03-test -> tools:openwrt-22.03)
-      - name: Determine tools container tag
-        run: |
-          CONTAINER_TAG=latest
-
-          if [ ${{ github.ref_type }} == "branch" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E 'openwrt-[0-9][0-9]\.[0-9][0-9]'; then
-              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\).*/\1/')"
-            fi
-          elif [ ${{ github.ref_type }} == "tag" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E 'v[0-9][0-9]\.[0-9][0-9]\..+'; then
-              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
-            fi
-          fi
-
-          echo "Tools container to push tools:$CONTAINER_TAG"
-          echo "CONTAINER_TAG=$CONTAINER_TAG" >> "$GITHUB_ENV"
-
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          path: 'openwrt'
-
-      - name: Download prebuilt tools from build job
-        uses: actions/download-artifact@v3
-        with:
-          name: linux-buildbot-prebuilt-tools
-          path: openwrt
-
-      - name: Extract prebuild tools
-        working-directory: openwrt
-        run: tar -xf tools.tar
-
-      - name: Login to GitHub Container Registry
-        uses: docker/login-action@v2
-        with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Build and push
-        uses: docker/build-push-action@v3
-        with:
-          context: openwrt
-          push: true
-          tags: ghcr.io/${{ env.OWNER_LC }}/tools:${{ env.CONTAINER_TAG }}
-          file: openwrt/.github/workflows/Dockerfile.tools
+      actions: write
+    uses: openwrt/actions-shared-workflows/.github/workflows/push-containers.yml@main

.github/workflows/toolchain.yml

@@ -3,14 +3,14 @@ name: Build Toolchains
 on:
   pull_request:
     paths:
-      - '.github/workflows/build.yml'
       - '.github/workflows/toolchain.yml'
       - 'toolchain/**'
   push:
     paths:
-      - '.github/workflows/build.yml'
       - '.github/workflows/toolchain.yml'
       - 'toolchain/**'
+    branches-ignore:
+      - master
 
 permissions:
   contents: read
@@ -20,51 +20,10 @@ concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}
 
 jobs:
-  determine_targets:
-    name: Set targets
-    runs-on: ubuntu-latest
-    outputs:
-      target: ${{ steps.find_targets.outputs.target }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-
-      - name: Set targets
-        id: find_targets
-        run: |
-          export TARGETS="$(perl ./scripts/dump-target-info.pl targets 2>/dev/null \
-            | sort -u -t '/' -k1,1 \
-            | awk '{ print $1 }')"
-
-          JSON='['
-          FIRST=1
-          for TARGET in $TARGETS; do
-            TUPLE='{"target":"'"$(echo $TARGET | cut -d "/" -f 1)"'","subtarget":"'"$(echo $TARGET | cut -d "/" -f 2)"'"}'
-            [[ $FIRST -ne 1 ]] && JSON="$JSON"','
-            JSON="$JSON""$TUPLE"
-            FIRST=0
-          done
-          JSON="$JSON"']'
-
-           echo -e "\n---- targets ----\n"
-           echo "$JSON"
-           echo -e "\n---- targets ----\n"
-
-           echo "target=$JSON" >> $GITHUB_OUTPUT
-
-  build:
-    name: Build Target Toolchain
-    needs: determine_targets
+  build-toolchains:
+    name: Build Toolchains for each target
     permissions:
       contents: read
       packages: read
-    strategy:
-       fail-fast: False
-       matrix:
-         include: ${{fromJson(needs.determine_targets.outputs.target)}}
-    uses: ./.github/workflows/build.yml
-    with:
-      target: ${{ matrix.target }}
-      subtarget: ${{ matrix.subtarget }}
-      build_toolchain: true
+      actions: write
+    uses: openwrt/actions-shared-workflows/.github/workflows/toolchain.yml@main

.github/workflows/tools.yml

@@ -5,14 +5,14 @@ on:
     paths:
       - 'include/**'
       - 'tools/**'
-      - '.github/workflows/build-tools.yml'
       - '.github/workflows/tools.yml'
   push:
     paths:
       - 'include/**'
       - 'tools/**'
-      - '.github/workflows/build-tools.yml'
       - '.github/workflows/tools.yml'
+    branches-ignore:
+      - master
 
 permissions:
   contents: read
@@ -22,72 +22,6 @@ concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}
 
 jobs:
-  build-macos-latest:
-    name: Build tools with macos latest
-    runs-on: macos-latest
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          path: openwrt
-
-      - name: Setup MacOS
-        run: |
-          echo "WORKPATH=/Volumes/OpenWrt" >> "$GITHUB_ENV"
-          hdiutil create -size 20g -type SPARSE -fs "Case-sensitive HFS+" -volname OpenWrt OpenWrt.sparseimage
-          hdiutil attach OpenWrt.sparseimage
-          mv "$GITHUB_WORKSPACE/openwrt" /Volumes/OpenWrt/
-
-      - name: Install required prereq on MacOS
-        working-directory: ${{ env.WORKPATH }}/openwrt
-        run: |
-          brew install \
-            automake \
-            coreutils \
-            diffutils \
-            findutils \
-            gawk \
-            git-extras \
-            gnu-getopt \
-            gnu-sed \
-            grep \
-            make
-
-            echo "/bin" >> "$GITHUB_PATH"
-            echo "/sbin/Library/Apple/usr/bin" >> "$GITHUB_PATH"
-            echo "/usr/bin" >> "$GITHUB_PATH"
-            echo "/usr/local/bin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/coreutils/bin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/findutils/libexec/gnubin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/gettext/bin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/gnu-getopt/bin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/make/libexec/gnubin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/make/libexec/gnubin" >> "$GITHUB_PATH"
-            echo "/usr/sbin" >> "$GITHUB_PATH"
-
-      - name: Make prereq
-        working-directory: ${{ env.WORKPATH }}/openwrt
-        run: make defconfig
-
-      - name: Build tools MacOS
-        working-directory: ${{ env.WORKPATH }}/openwrt
-        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Upload logs
-        if: always()
-        uses: actions/upload-artifact@v3
-        with:
-          name: macos-latest-logs
-          path: ${{ env.WORKPATH }}/openwrt/logs
-
-      - name: Upload config
-        if: always()
-        uses: actions/upload-artifact@v3
-        with:
-          name: macos-latest-config
-          path: ${{ env.WORKPATH }}/openwrt/.config
-
-  build-linux-buildbot:
-    name: Build tools with buildbot container
-    uses: ./.github/workflows/build-tools.yml
+  build-tools:
+    name: Build host tools for linux and macos based systems
+    uses: openwrt/actions-shared-workflows/.github/workflows/tools.yml@main

.gitignore

@@ -14,6 +14,7 @@
 /feeds
 /feeds.conf
 /files
+/target/linux/feeds
 /overlay
 /package/feeds
 /package/openwrt-packages

Makefile

@@ -14,7 +14,7 @@ $(if $(findstring $(space),$(TOPDIR)),$(error ERROR: The path to the OpenWrt dir
 
 world:
 
-DISTRO_PKG_CONFIG:=$(shell $(TOPDIR)/scripts/command_all.sh pkg-config | grep '/usr' -m 1)
+DISTRO_PKG_CONFIG:=$(shell $(TOPDIR)/scripts/command_all.sh pkg-config | grep -e '/usr' -e '/nix/store' -m 1)
 
 export ORIG_PATH:=$(if $(ORIG_PATH),$(ORIG_PATH),$(PATH))
 export PATH:=$(if $(STAGING_DIR),$(abspath $(STAGING_DIR)/../host/bin),$(TOPDIR)/staging_dir/host/bin):$(PATH)
@@ -40,6 +40,9 @@ else
   include tools/Makefile
   include toolchain/Makefile
 
+# Include the test suite Makefile if it exists
+-include tests/Makefile
+
 $(toolchain/stamp-compile): $(tools/stamp-compile) $(if $(CONFIG_BUILDBOT),toolchain_rebuild_check)
 $(target/stamp-compile): $(toolchain/stamp-compile) $(tools/stamp-compile) $(BUILD_DIR)/.prepared
 $(package/stamp-compile): $(target/stamp-compile) $(package/stamp-cleanup)

build_openwrt.sh

@@ -0,0 +1,587 @@
+#!/usr/bin/env bash
+
+#====================================================
+# OpenWrt 构建管理脚本
+# 功能：提供交互式菜单，可选择执行特定操作
+# 更新：2024-02-26
+#====================================================
+
+#---------------基础配置---------------#
+# 日志目录设置
+LOGS_ROOT="openwrt_logs"
+SESSION_DIR="${LOGS_ROOT}/$(date +%Y%m%d_%H%M%S)"
+LOG_FILE="${SESSION_DIR}/build.log"
+
+#---------------清理配置---------------#
+# 需要移除的目录列表
+declare -a REMOVE_DIRS=(
+)
+
+# 需要移除的包列表
+declare -a REMOVE_PACKAGES=(
+    "feeds/luci/applications/luci-app-mosdns"
+    "feeds/packages/net/alist"
+    "feeds/packages/net/adguardhome"
+    "feeds/packages/net/smartdns"
+)
+
+#---------------自定义包配置---------------#
+# 定义自定义包配置，格式：[包名]=[目标目录]=[仓库URL]=[分支]=[是否使用--depth 1]
+declare -A CUSTOM_PACKAGES=(
+    ["partexp"]="package/luci-app-partexp=https://github.com/sirpdboy/luci-app-partexp=main=false"
+    ["openclash"]="package/openclash=https://github.com/vernesong/OpenClash=dev=true"
+    ["zerotier"]="package/luci-app-zerotier=https://nanako.site/gitea/Nanako/luci-app-zerotier.git=main=false"
+    ["5gsupport"]="package/openwrt-app-actions=https://github.com/Siriling/openwrt-app-actions.git=main=true"
+    ["design"]="package/luci-theme-design=https://github.com/SAENE/luci-theme-design.git=js=false"
+    ["mt76"]="package/firmware/mt76=https://github.com/openwrt/mt76.git=master=false"
+)
+
+#---------------日志系统---------------#
+# 保存原始的标准输出和错误输出
+exec {STDOUT_ORIG}>&1
+exec {STDERR_ORIG}>&2
+
+# 初始化日志系统
+init_logger() {
+    # 创建日志目录结构
+    mkdir -p "$SESSION_DIR" || {
+        echo "无法创建日志目录: $SESSION_DIR"
+        exit 1
+    }
+    
+    # 设置全局变量标记是否记录日志
+    LOGGING_ENABLED=true
+    
+    echo "日志保存在: $LOG_FILE"
+    
+    if [ "$LOGGING_ENABLED" = true ]; then
+        # 标准输出重定向
+        exec > >(while read -r line; do 
+            printf "[%(%Y-%m-%d %H:%M:%S)T] %s\n" -1 "$line" | tee -a "$LOG_FILE"
+        done)
+        
+        # 标准错误重定向
+        exec 2> >(while read -r line; do 
+            printf "[%(%Y-%m-%d %H:%M:%S)T] %s\n" -1 "$line" | tee -a "$LOG_FILE"
+        done >&2)
+    fi
+}
+
+# 创建新的编译日志文件
+create_build_log() {
+    local build_type=$1
+    local timestamp=$(date +%Y%m%d_%H%M%S)
+    BUILD_LOG_FILE="${SESSION_DIR}/${build_type}_${timestamp}.log"
+    echo "创建新的编译日志: $BUILD_LOG_FILE"
+    return 0
+}
+
+# 重定向输出到指定的编译日志文件
+redirect_to_build_log() {
+    local log_file=$1
+    
+    # 保存当前的输出重定向状态
+    LOGGING_TO_BUILD_LOG=true
+    
+    # 重定向输出到编译日志文件
+    exec > >(while read -r line; do 
+        printf "[%(%Y-%m-%d %H:%M:%S)T] %s\n" -1 "$line" >> "$log_file"
+    done)
+    
+    # 重定向错误输出到编译日志文件
+    exec 2> >(while read -r line; do 
+        printf "[%(%Y-%m-%d %H:%M:%S)T] %s\n" -1 "$line" >> "$log_file"
+    done >&2)
+}
+
+# 恢复输出到主日志
+restore_main_logging() {
+    LOGGING_TO_BUILD_LOG=false
+    
+    # 恢复到主日志
+    if [ "$LOGGING_ENABLED" = true ]; then
+        # 标准输出重定向
+        exec > >(while read -r line; do 
+            printf "[%(%Y-%m-%d %H:%M:%S)T] %s\n" -1 "$line" | tee -a "$LOG_FILE"
+        done)
+        
+        # 标准错误重定向
+        exec 2> >(while read -r line; do 
+            printf "[%(%Y-%m-%d %H:%M:%S)T] %s\n" -1 "$line" | tee -a "$LOG_FILE"
+        done >&2)
+    fi
+}
+
+# 禁用日志输出
+disable_logging() {
+    LOGGING_ENABLED=false
+    exec >&$STDOUT_ORIG
+    exec 2>&$STDERR_ORIG
+}
+
+# 启用日志输出
+enable_logging() {
+    LOGGING_ENABLED=true
+    # 标准输出重定向
+    exec > >(while read -r line; do 
+        printf "[%(%Y-%m-%d %H:%M:%S)T] %s\n" -1 "$line" | tee -a "$LOG_FILE"
+    done)
+    
+    # 标准错误重定向
+    exec 2> >(while read -r line; do 
+        printf "[%(%Y-%m-%d %H:%M:%S)T] %s\n" -1 "$line" | tee -a "$LOG_FILE"
+    done >&2)
+}
+
+# 设置终端颜色
+setup_colors() {
+    if [[ -t 2 ]]; then
+        RED='\033[0;31m'
+        GREEN='\033[0;32m'
+        YELLOW='\033[1;33m'
+        BLUE='\033[0;34m'
+        NC='\033[0m'
+    else
+        RED='' GREEN='' YELLOW='' BLUE='' NC=''
+    fi
+}
+
+# 记录日志函数 - 使用此函数来明确日志级别
+log() {
+    local level=$1
+    local message=$2
+    local timestamp=$(date "+%Y-%m-%d %H:%M:%S")
+    local color="" level_str=""
+    
+    case $level in
+        "INFO")  color="$GREEN";  level_str="INFO" ;;
+        "WARN")  color="$YELLOW"; level_str="WARN" ;;
+        "ERROR") color="$RED";    level_str="ERROR" ;;
+        "DEBUG") color="$BLUE";   level_str="DEBUG" ;;
+    esac
+    
+    printf "[%s] ${color}[%s]${NC}: %s\n" "$timestamp" "$level_str" "$message"
+}
+
+# 同时记录到主日志和编译日志的函数
+log_to_both() {
+    local level=$1
+    local message=$2
+    local build_log=$3
+    
+    # 记录到主日志
+    log "$level" "$message"
+    
+    # 记录到编译日志
+    local timestamp=$(date "+%Y-%m-%d %H:%M:%S")
+    echo "[$timestamp] [$level]: $message" >> "$build_log"
+}
+
+#---------------自定义包管理函数---------------#
+# 更新单个自定义包
+update_single_package() {
+    local pkg_name=$1
+    local config=$2
+    
+    # 解析配置
+    local target_dir=$(echo "$config" | cut -d= -f1)
+    local repo_url=$(echo "$config" | cut -d= -f2)
+    local branch=$(echo "$config" | cut -d= -f3)
+    local use_depth=$(echo "$config" | cut -d= -f4)
+    
+    log "INFO" "更新 $pkg_name..."
+    
+    # 检查目标目录
+    if [ -d "$target_dir" ]; then
+        log "INFO" "移除现有 $target_dir 目录"
+        rm -rf "$target_dir" || { 
+            log "ERROR" "无法删除 $target_dir 目录" 
+            return 1
+        }
+    fi
+    
+    # 准备克隆命令
+    local clone_cmd="git clone --progress"
+    
+    # 添加分支参数 (如果指定)
+    if [ -n "$branch" ] && [ "$branch" != "master" ]; then
+        clone_cmd="$clone_cmd -b $branch"
+    fi
+    
+    # 添加 depth 参数 (如果需要)
+    if [ "$use_depth" = "true" ]; then
+        clone_cmd="$clone_cmd --depth 1"
+    fi
+    
+    # 完成克隆命令
+    clone_cmd="$clone_cmd $repo_url $target_dir"
+    
+    # 执行克隆
+    log "INFO" "执行: $clone_cmd"
+    eval "$clone_cmd" || {
+        log "ERROR" "克隆 $pkg_name 失败"
+        return 1
+    }
+    
+    log "INFO" "$pkg_name 更新完成"
+    return 0
+}
+
+# 更新自定义包的主函数
+update_custom_package() {
+    local failed_packages=()
+    local success_count=0
+    local total_packages=${#CUSTOM_PACKAGES[@]}
+    
+    log "INFO" "开始更新 $total_packages 个自定义包..."
+    
+    for pkg_name in "${!CUSTOM_PACKAGES[@]}"; do
+        update_single_package "$pkg_name" "${CUSTOM_PACKAGES[$pkg_name]}" || {
+            failed_packages+=("$pkg_name")
+            continue
+        }
+        ((success_count++))
+    done
+    
+    # 显示更新结果
+    if [ ${#failed_packages[@]} -eq 0 ]; then
+        log "INFO" "所有自定义包更新成功 ($success_count/$total_packages)"
+        return 0
+    else
+        log "WARN" "部分包更新失败 (成功: $success_count/$total_packages)"
+        log "ERROR" "更新失败的包: ${failed_packages[*]}"
+        return 1
+    fi
+}
+
+# 更新特定自定义包
+update_specific_package() {
+    local pkg_name=$1
+    
+    if [ -z "$pkg_name" ]; then
+        log "ERROR" "未指定包名"
+        return 1
+    fi
+    
+    if [ -z "${CUSTOM_PACKAGES[$pkg_name]}" ]; then
+        log "ERROR" "未找到包配置：$pkg_name"
+        log "INFO" "可用的包: ${!CUSTOM_PACKAGES[*]}"
+        return 1
+    fi
+    
+    update_single_package "$pkg_name" "${CUSTOM_PACKAGES[$pkg_name]}"
+}
+
+#---------------基础功能函数---------------#
+# 清理工作区
+clean_workspace() {
+    log "INFO" "开始清理工作区..."
+
+    log "INFO" "执行./scripts/feeds clean..."
+    ./scripts/feeds clean || log "WARN" "feeds clean 失败"
+
+    log "INFO" "执行rm -rf ./tmp ./staging_dir ./build_dir ./bin ./dl..."
+    rm -rf ./tmp ./staging_dir ./build_dir ./bin ./dl || log "WARN" "删除临时目录失败"
+
+    log "INFO" "工作区清理完成"
+}
+
+# 清理编译临时文件
+clean_build_temp() {
+    log "INFO" "开始清理编译临时文件..."
+    
+    log "INFO" "删除临时编译目录和缓存..."
+    rm -rf ./tmp ./staging_dir ./build_dir || log "WARN" "删除临时编译目录失败"
+    
+    log "INFO" "编译临时文件清理完成"
+}
+
+# 更新源码
+update_source() {
+    log "INFO" "开始更新源码..."
+    git pull || { log "ERROR" "源码更新失败"; return 1; }
+    log "INFO" "源码更新完成"
+}
+
+# 更新feeds
+update_feeds() {
+    log "INFO" "开始更新feeds..."
+    ./scripts/feeds update -a && ./scripts/feeds install -a || {
+        log "ERROR" "Feeds更新失败"
+        return 1
+    }
+    log "INFO" "Feeds更新完成"
+    return 0
+}
+
+# 执行编译命令并仅记录到指定日志文件
+run_build_command() {
+    local cmd=$1
+    local log_file=$2
+    local msg=$3
+    
+    log_to_both "INFO" "$msg" "$log_file"
+    
+    # 重定向输出到编译日志
+    redirect_to_build_log "$log_file"
+    
+    # 执行编译命令
+    local result=0
+    eval "$cmd" || result=1
+    
+    # 恢复输出到主日志
+    restore_main_logging
+    
+    return $result
+}
+
+# 编译固件
+build_firmware() {
+    # 创建新的编译日志
+    create_build_log "firmware"
+    local current_log="$BUILD_LOG_FILE"
+    
+    log "INFO" "开始编译固件..."
+    log "INFO" "编译详细日志位置: $current_log"
+    
+    # 下载依赖
+    log "INFO" "下载依赖包..."
+    run_build_command "make download -j$(nproc) V=s" "$current_log" "正在下载依赖包..." || {
+        log "ERROR" "依赖下载失败，详见日志: $current_log"
+        return 1
+    }
+    
+    # 使用多线程编译
+    local cpu_cores=$(nproc)
+    log "INFO" "使用 $cpu_cores 线程开始编译..."
+    
+    if run_build_command "make -j$cpu_cores V=s" "$current_log" "多线程编译进行中..."; then
+        log "INFO" "多线程编译成功完成"
+        return 0
+    else
+        log "WARN" "多线程编译失败，清理临时文件后切换为单线程编译..."
+        
+        # 清理编译临时文件
+        clean_build_temp
+        
+        # 创建一个新日志用于单线程编译
+        create_build_log "firmware_singlethread"
+        current_log="$BUILD_LOG_FILE"
+        log "INFO" "单线程编译详细日志位置: $current_log"
+        
+        # 重新下载依赖
+        log "INFO" "重新下载依赖包..."
+        run_build_command "make download -j1 V=s" "$current_log" "单线程模式重新下载依赖..." || {
+            log "ERROR" "单线程依赖下载也失败，详见日志: $current_log"
+            return 1
+        }
+        
+        if run_build_command "make -j1 V=s" "$current_log" "单线程编译进行中..."; then
+            log "INFO" "单线程编译成功完成"
+            return 0
+        else
+            log "ERROR" "编译失败，即使在单线程模式下。详见日志: $current_log"
+            return 1
+        fi
+    fi
+}
+
+# 清理旧包
+clean_packages() {
+    log "INFO" "开始清理旧包..."
+    local removed_count=0
+    local failed_count=0
+    
+    # 清理目录
+    for dir in "${REMOVE_DIRS[@]}"; do
+        if [ -d "$dir" ]; then
+            rm -rf "$dir" && {
+                log "INFO" "已删除: $dir"
+                ((removed_count++))
+            } || {
+                log "ERROR" "删除失败: $dir"
+                ((failed_count++))
+            }
+        fi
+    done
+    
+    # 清理包
+    for pkg in "${REMOVE_PACKAGES[@]}"; do
+        if [ -d "$pkg" ]; then
+            rm -rf "$pkg" && {
+                log "INFO" "已移除: $pkg"
+                ((removed_count++))
+            } || {
+                log "ERROR" "删除失败: $pkg"
+                ((failed_count++))
+            }
+        fi
+    done
+    
+    if [ $failed_count -eq 0 ]; then
+        log "INFO" "包清理完成，共移除 $removed_count 个包/目录"
+        return 0
+    else
+        log "WARN" "包清理部分完成，成功: $removed_count, 失败: $failed_count"
+        return 1
+    fi
+}
+
+# 更新所有组件
+update_all_components() {
+    log "INFO" "开始更新所有组件..."
+    local failed=false
+    
+    # 更新源码
+    log "INFO" "执行源码更新..."
+    update_source || failed=true
+    
+    # 清理旧包
+    log "INFO" "执行清理旧包..."
+    clean_packages || log "WARN" "清理旧包部分失败，继续执行..."
+    
+    # 更新自定义包
+    log "INFO" "执行自定义包更新..."
+    update_custom_package || failed=true
+    
+    # 更新feeds
+    log "INFO" "执行feeds更新..."
+    update_feeds || failed=true
+    
+    if [ "$failed" = true ]; then
+        log "WARN" "部分组件更新失败，请查看日志了解详情"
+        return 1
+    else
+        log "INFO" "所有组件更新完成"
+        return 0
+    fi
+}
+
+# 菜单配置
+menuconfig() {
+    log "INFO" "开始菜单配置..."
+    disable_logging
+    make menuconfig
+    enable_logging
+    log "INFO" "菜单配置完成"
+}
+
+#---------------组合功能函数---------------#
+# 完整构建流程
+full_build() {
+    log "INFO" "启动完整构建流程..."
+    
+    clean_workspace || log "WARN" "工作区清理部分失败，继续执行..."
+    update_source || { log "ERROR" "源码更新失败，终止构建"; return 1; }
+    clean_packages || log "WARN" "清理旧包部分失败，继续执行..."
+    update_custom_package || { log "ERROR" "自定义包更新失败，终止构建"; return 1; }
+    update_feeds || { log "ERROR" "feeds更新失败，终止构建"; return 1; }
+    
+    log "INFO" "进入菜单配置..."
+    menuconfig
+    
+    log "INFO" "开始编译固件..."
+    build_firmware || {
+        log "ERROR" "固件编译失败"
+        return 1
+    }
+    
+    log "INFO" "完整构建流程完成"
+    return 0
+}
+
+#---------------菜单函数---------------#
+print_menu() {
+    echo -e "\n${BLUE}OpenWrt 构建管理菜单${NC}"
+    echo -e "${YELLOW}================================${NC}"
+    echo -e "${GREEN}1.${NC} 完整构建流程"
+    echo -e "${GREEN}2.${NC} 清理工作区"
+    echo -e "${GREEN}3.${NC} 更新所有组件"
+    echo -e "${GREEN}4.${NC} 清理旧包"
+    echo -e "${GREEN}5.${NC} 编译固件"
+    echo -e "${GREEN}6.${NC} 调整配置(menuconfig)"
+    echo -e "${GREEN}7.${NC} 更新自定义包"
+    echo -e "${GREEN}8.${NC} 更新特定自定义包"
+    echo -e "${GREEN}9.${NC} 更新源码"
+    echo -e "${GREEN}10.${NC} 更新feeds"
+    echo -e "${GREEN}0.${NC} 退出"
+    echo -e "${YELLOW}================================${NC}"
+    echo -ne "请选择操作 [0-10]: "
+}
+
+# 显示可用的自定义包
+print_package_menu() {
+    echo -e "\n${BLUE}可用的自定义包${NC}"
+    echo -e "${YELLOW}================================${NC}"
+    
+    local i=1
+    for pkg_name in "${!CUSTOM_PACKAGES[@]}"; do
+        echo -e "${GREEN}$i.${NC} $pkg_name"
+        ((i++))
+    done
+    
+    echo -e "${YELLOW}================================${NC}"
+    echo -ne "请选择要更新的包 [1-$((i-1))]: "
+}
+
+# 选择特定自定义包更新
+select_specific_package() {
+    local pkg_names=("${!CUSTOM_PACKAGES[@]}")
+    print_package_menu
+    
+    read -r choice
+    
+    # 验证选择
+    if [[ ! "$choice" =~ ^[0-9]+$ ]] || [ "$choice" -lt 1 ] || [ "$choice" -gt ${#pkg_names[@]} ]; then
+        log "ERROR" "无效选择: $choice"
+        return 1
+    fi
+    
+    local selected_pkg=${pkg_names[$((choice-1))]}
+    log "INFO" "选择更新包: $selected_pkg"
+    
+    update_specific_package "$selected_pkg"
+}
+
+#---------------主函数---------------#
+main() {
+    # 初始化日志目录和日志系统
+    init_logger
+    setup_colors
+    
+    log "INFO" "OpenWrt 构建管理脚本启动 - 会话日志目录: $SESSION_DIR"
+    
+    while true; do
+        print_menu
+        read -r choice
+        
+        case $choice in
+            1) full_build ;;
+            2) clean_workspace ;;
+            3) update_all_components ;;
+            4) clean_packages ;;
+            5) build_firmware ;;
+            6) menuconfig ;;
+            7) update_custom_package ;;
+            8) select_specific_package ;;
+            9) update_source ;;
+            10) update_feeds ;;
+            0) 
+                log "INFO" "退出脚本"
+                exit 0 
+                ;;
+            *)
+                log "WARN" "无效选择: $choice，请重试"
+                ;;
+        esac
+        
+        # 操作完成后暂停
+        if [[ $choice != 0 ]]; then
+            echo -e "\n${YELLOW}操作完成，按回车键继续...${NC}"
+            read -r
+        fi
+    done
+}
+
+# 执行主函数
+main "$@"

config/Config-build.in

@@ -26,6 +26,14 @@ menu "Global build settings"
 		  directory containing machine readable list of built profiles
 		  and resulting images.
 
+	config JSON_CYCLONEDX_SBOM
+		bool "Create CycloneDX SBOM JSON"
+		default BUILDBOT
+		help
+		  Create a JSON files *.bom.cdx.json in the build
+		  directory containing Software Bill Of Materials in CycloneDX
+		  format.
+
 	config ALL_NONSHARED
 		bool "Select all target specific packages by default"
 		select ALL_KMODS

config/Config-images.in

@@ -127,6 +127,7 @@ menu "Target Images"
 		config TARGET_EXT4_JOURNAL
 			bool "Create a journaling filesystem"
 			depends on TARGET_ROOTFS_EXT4FS
+			default y
 			help
 			  Create an ext4 filesystem with a journal.
 

config/Config-kernel.in

@@ -157,16 +157,6 @@ config KERNEL_KASAN
 	  Currently CONFIG_KASAN doesn't work with CONFIG_DEBUG_SLAB
 	  (the resulting kernel does not boot).
 
-config KERNEL_KASAN_EXTRA
-	bool "KAsan: extra checks"
-	depends on KERNEL_KASAN && KERNEL_DEBUG_KERNEL
-	help
-	  This enables further checks in the kernel address sanitizer, for now
-	  it only includes the address-use-after-scope check that can lead
-	  to excessive kernel stack usage, frame size warnings and longer
-	  compile time.
-	  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 has more
-
 config KERNEL_KASAN_VMALLOC
 	bool "Back mappings in vmalloc space with real shadow memory"
 	depends on KERNEL_KASAN
@@ -1340,3 +1330,17 @@ config KERNEL_UBIFS_FS_SECURITY
 
 config KERNEL_JFFS2_FS_SECURITY
 	bool "JFFS2 Security Labels"
+
+config KERNEL_WERROR
+	bool "Compile the kernel with warnings as errors"
+	help
+	  A kernel build should not cause any compiler warnings, and this
+	  enables the '-Werror' (for C) and '-Dwarnings' (for Rust) flags
+	  to enforce that rule by default. Certain warnings from other tools
+	  such as the linker may be upgraded to errors with this option as
+	  well.
+
+	  However, if you have a new (or very old) compiler or linker with odd
+	  and unusual warnings, or you have some architecture with problems,
+	  you may need to disable this config option in order to
+	  successfully build the kernel.

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://git.openwrt.org/feed/packages.git^0da9f622975aa1e4efe452da4acbae15479bee63
-src-git luci https://git.openwrt.org/project/luci.git^257f54cb8bcd493d9be0a45a3c316668b793e8ae
-src-git routing https://git.openwrt.org/feed/routing.git^2272106e0839ee06957e88e3596489e1b510d3c2
-src-git telephony https://git.openwrt.org/feed/telephony.git^9746ae8f964e18f04b64fbe1956366954ff223f8
+src-git packages https://git.openwrt.org/feed/packages.git;openwrt-23.05
+src-git luci https://git.openwrt.org/project/luci.git;openwrt-23.05
+src-git routing https://git.openwrt.org/feed/routing.git;openwrt-23.05
+src-git telephony https://git.openwrt.org/feed/telephony.git;openwrt-23.05

include/autotools.mk

@@ -44,7 +44,7 @@ define autoreconf
 				touch NEWS AUTHORS COPYING ABOUT-NLS ChangeLog; \
 				$(AM_TOOL_PATHS) \
 					LIBTOOLIZE='$(STAGING_DIR_HOST)/bin/libtoolize --install' \
-					$(STAGING_DIR_HOST)/bin/autoreconf -v -f -i -s \
+					$(STAGING_DIR_HOST)/bin/autoreconf -v -f -i \
 					$(if $(word 2,$(3)),--no-recursive) \
 					-B $(STAGING_DIR_HOST)/share/aclocal \
 					$(patsubst %,-I %,$(5)) \

include/feeds.mk

@@ -33,7 +33,7 @@ define FeedSourcesAppend
   echo 'src/gz %d_core %U/targets/%S/packages'; \
   $(strip $(if $(CONFIG_PER_FEED_REPO), \
 	echo 'src/gz %d_base %U/packages/%A/base'; \
-	$(if $(filter %SNAPSHOT-y,$(VERSION_NUMBER)-$(CONFIG_BUILDBOT)), \
+	$(if $(CONFIG_BUILDBOT), \
 		echo 'src/gz %d_kmods %U/targets/%S/kmods/$(LINUX_VERSION)-$(LINUX_RELEASE)-$(LINUX_VERMAGIC)';) \
 	$(foreach feed,$(FEEDS_AVAILABLE), \
 		$(if $(CONFIG_FEED_$(feed)), \

include/host-build.mk

@@ -35,13 +35,11 @@ include $(INCLUDE_DIR)/autotools.mk
 _host_target:=$(if $(HOST_QUILT),,.)
 
 Host/Patch:=$(Host/Patch/Default)
-ifneq ($(strip $(HOST_UNPACK)),)
-  define Host/Prepare/Default
-	$(HOST_UNPACK)
+define Host/Prepare/Default
+	$(if $(strip $(HOST_UNPACK)),$(HOST_UNPACK))
 	[ ! -d ./src/ ] || $(CP) ./src/* $(HOST_BUILD_DIR)
 	$(Host/Patch)
-  endef
-endif
+endef
 
 define Host/Prepare
   $(call Host/Prepare/Default)

include/image-commands.mk

@@ -226,6 +226,48 @@ define Build/copy-file
 	cat "$(1)" > "$@"
 endef
 
+# Create a header for a D-Link AI series recovery image and add it at the beginning of the image
+# Currently supported: AQUILA M30, EAGLE M32 and R32
+# Arguments:
+# 1: Start string of the header
+# 2: Firmware version
+# 3: Block start address
+# 4: Block length
+# 5: Device FMID
+define Build/dlink-ai-recovery-header
+	$(eval header_start=$(word 1,$(1)))
+	$(eval firmware_version=$(word 2,$(1)))
+	$(eval block_start=$(word 3,$(1)))
+	$(eval block_length=$(word 4,$(1)))
+	$(eval device_fmid=$(word 5,$(1)))
+# create $@.header without the checksum
+	echo -en "$(header_start)\x00\x00" > "$@.header"
+# Calculate checksum over data area ($@) and append it to the header.
+# The checksum is the 2byte-sum over the whole data area.
+# Every overflow during the checksum calculation must increment the current checksum value by 1.
+	od -v -w2 -tu2 -An --endian little "$@" | awk '{ s+=$$1; } END { s%=65535; printf "%c%c",s%256,s/256; }' >> "$@.header"
+	echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00" >> "$@.header"
+	echo -en "$(firmware_version)" >> "$@.header"
+# Only one block supported: Erase start/length is identical to data start/length
+	echo -en "$(block_start)$(block_length)$(block_start)$(block_length)" >> "$@.header"
+# Only zeros
+	echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" >> "$@.header"
+# Last 16 bytes, but without checksum
+	echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00" >> "$@.header"
+	echo -en "$(device_fmid)" >> "$@.header"
+# Calculate and append checksum: The checksum must be set so that the 2byte-sum of the whole header is 0.
+# Every overflow during the checksum calculation must increment the current checksum value by 1.
+	od -v -w2 -tu2 -An --endian little "$@.header" | awk '{s+=65535-$$1;}END{s%=65535;printf "%c%c",s%256,s/256;}' >> "$@.header"
+	cat "$@.header" "$@" > "$@.new"
+	mv "$@.new" "$@"
+	rm "$@.header"
+endef
+
+define Build/dlink-sge-image
+	$(STAGING_DIR_HOST)/bin/dlink-sge-image $(1) $@ $@.enc
+	mv $@.enc $@
+endef
+
 define Build/edimax-header
 	$(STAGING_DIR_HOST)/bin/mkedimaximg -i $@ -o $@.new $(1)
 	@mv $@.new $@

include/image.mk

@@ -40,8 +40,10 @@ IMG_PREFIX_VERCODE:=$(if $(CONFIG_VERSION_CODE_FILENAMES),$(call sanitize,$(VERS
 IMG_PREFIX:=$(VERSION_DIST_SANITIZED)-$(IMG_PREFIX_VERNUM)$(IMG_PREFIX_VERCODE)$(IMG_PREFIX_EXTRA)$(BOARD)$(if $(SUBTARGET),-$(SUBTARGET))
 IMG_ROOTFS:=$(IMG_PREFIX)-rootfs
 IMG_COMBINED:=$(IMG_PREFIX)-combined
+ifeq ($(DUMP),)
 IMG_PART_SIGNATURE:=$(shell echo $(SOURCE_DATE_EPOCH)$(LINUX_VERMAGIC) | $(MKHASH) md5 | cut -b1-8)
 IMG_PART_DISKGUID:=$(shell echo $(SOURCE_DATE_EPOCH)$(LINUX_VERMAGIC) | $(MKHASH) md5 | sed -E 's/(.{8})(.{4})(.{4})(.{4})(.{10})../\1-\2-\3-\4-\500/')
+endif
 
 MKFS_DEVTABLE_OPT := -D $(INCLUDE_DIR)/device_table.txt
 
@@ -167,7 +169,9 @@ define Image/pad-to
 	mv $(1).new $(1)
 endef
 
+ifeq ($(DUMP),)
 ROOTFS_PARTSIZE=$(shell echo $$(($(CONFIG_TARGET_ROOTFS_PARTSIZE)*1024*1024)))
+endif
 
 define Image/pad-root-squashfs
 	$(call Image/pad-to,$(KDIR)/root.squashfs,$(if $(1),$(1),$(ROOTFS_PARTSIZE)))
@@ -277,6 +281,13 @@ endef
 define Image/Manifest
 	$(call opkg,$(TARGET_DIR_ORIG)) list-installed > \
 		$(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),-$(PROFILE_SANITIZED)).manifest
+ifndef IB
+	$(if $(CONFIG_JSON_CYCLONEDX_SBOM), \
+		$(SCRIPT_DIR)/package-metadata.pl imgcyclonedxsbom \
+		$(TMP_DIR)/.packageinfo \
+		$(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),-$(PROFILE_SANITIZED)).manifest > \
+		$(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),-$(PROFILE_SANITIZED)).bom.cdx.json)
+endif
 endef
 
 define Image/gzip-ext4-padded-squashfs
@@ -500,7 +511,7 @@ define Device/Build/initramfs
 	  $$(if $$(CONFIG_JSON_OVERVIEW_IMAGE_INFO), $(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json,))
 
   $(KDIR)/$$(KERNEL_INITRAMFS_NAME):: image_prepare
-  $(1)-images: $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE))
+  $(1)-initramfs-images: $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE))
   $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)
 	cp $$^ $$@
 
@@ -564,7 +575,7 @@ define Device/Build/dtb
   $(KDIR)/image-$(1).dtb: FORCE
 	$(call Image/BuildDTB,$(strip $(2))/$(strip $(3)).dts,$$@)
 
-  image_prepare: $(KDIR)/image-$(1).dtb
+  compile-dtb: $(KDIR)/image-$(1).dtb
   endif
 
 endef
@@ -575,7 +586,7 @@ define Device/Build/dtbo
   $(KDIR)/image-$(1).dtbo: FORCE
 	$(call Image/BuildDTBO,$(strip $(2))/$(strip $(3)).dtso,$$@)
 
-  image_prepare: $(KDIR)/image-$(1).dtbo
+  compile-dtb: $(KDIR)/image-$(1).dtbo
   endif
 
 endef
@@ -628,7 +639,7 @@ define Device/Build/image
   ifndef IB
     $$(ROOTFS/$(1)/$(3)): $(if $(TARGET_PER_DEVICE_ROOTFS),target-dir-$$(ROOTFS_ID/$(3)))
   endif
-  $(KDIR)/tmp/$(call DEVICE_IMG_NAME,$(1),$(2)): $$(KDIR_KERNEL_IMAGE) $$(ROOTFS/$(1)/$(3))
+  $(KDIR)/tmp/$(call DEVICE_IMG_NAME,$(1),$(2)): $$(KDIR_KERNEL_IMAGE) $$(ROOTFS/$(1)/$(3)) $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(if $(IB),,$(3)-initramfs-images))
 	@rm -f $$@
 	[ -f $$(word 1,$$^) -a -f $$(word 2,$$^) ]
 	$$(call concat_cmd,$(if $(IMAGE/$(2)/$(1)),$(IMAGE/$(2)/$(1)),$(IMAGE/$(2))))
@@ -684,7 +695,7 @@ define Device/Build/artifact
 	  $(BUILD_DIR)/json_info_files/$(DEVICE_IMG_PREFIX)-$(1).json, \
 	  $(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1))
   $(eval $(call Device/Export,$(KDIR)/tmp/$(DEVICE_IMG_PREFIX)-$(1)))
-  $(KDIR)/tmp/$(DEVICE_IMG_PREFIX)-$(1): $$(KDIR_KERNEL_IMAGE) $(2)-images
+  $(KDIR)/tmp/$(DEVICE_IMG_PREFIX)-$(1): $$(KDIR_KERNEL_IMAGE) $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(if $(IB),,$(2)-initramfs-images)) $(2)-images
 	@rm -f $$@
 	$$(call concat_cmd,$(ARTIFACT/$(1)))
 
@@ -812,18 +823,20 @@ define BuildImage
   download:
   prepare:
   compile:
+  compile-dtb:
   clean:
   image_prepare:
 
   ifeq ($(IB),)
-    .PHONY: download prepare compile clean image_prepare kernel_prepare install install-images
+    .PHONY: download prepare compile compile-dtb clean image_prepare kernel_prepare install install-images
     compile:
 		$(call Build/Compile)
 
     clean:
 		$(call Build/Clean)
 
-    image_prepare: compile
+    compile-dtb:
+    image_prepare: compile compile-dtb
 		mkdir -p $(BIN_DIR) $(KDIR)/tmp
 		rm -rf $(BUILD_DIR)/json_info_files
 		$(call Image/Prepare)

include/kernel-5.15

@@ -1,2 +1,2 @@
-LINUX_VERSION-5.15 = .134
-LINUX_KERNEL_HASH-5.15.134 = f37182aecb57ed6853d01e1074d3a60a653331e35f3115728381e08be050b9d3
+LINUX_VERSION-5.15 = .173
+LINUX_KERNEL_HASH-5.15.173 = 8a4b2a47ccc9b208b2b6ed9a216ea1a5eb12852c723bec1a04de9e671a1d7da8

include/kernel-build.mk

@@ -156,6 +156,10 @@ define BuildKernel
   compile: $(LINUX_DIR)/.modules
 	$(MAKE) -C image compile TARGET_BUILD=
 
+  dtb: $(STAMP_CONFIGURED)
+	$(_SINGLE)$(KERNEL_MAKE) scripts_dtc
+	$(MAKE) -C image compile-dtb TARGET_BUILD=
+
   oldconfig menuconfig nconfig xconfig: $(STAMP_PREPARED) $(STAMP_CHECKED) FORCE
 	rm -f $(LINUX_DIR)/.config.prev
 	rm -f $(STAMP_CONFIGURED)

include/kernel-defaults.mk

@@ -166,7 +166,7 @@ define Kernel/CompileImage/Initramfs
 	$(if $(SOURCE_DATE_EPOCH),touch -hcd "@$(SOURCE_DATE_EPOCH)" $(TARGET_DIR) $(TARGET_DIR)/init)
 	rm -rf $(KERNEL_BUILD_DIR)/linux-$(LINUX_VERSION)/usr/initramfs_data.cpio*
 ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE),y)
-ifneq ($(qstrip $(CONFIG_EXTERNAL_CPIO)),)
+ifneq ($(call qstrip,$(CONFIG_EXTERNAL_CPIO)),)
 	$(CP) $(CONFIG_EXTERNAL_CPIO) $(KERNEL_BUILD_DIR)/initrd.cpio
 else
 	( cd $(TARGET_DIR); find . | LC_ALL=C sort | $(STAGING_DIR_HOST)/bin/cpio --reproducible -o -H newc -R 0:0 > $(KERNEL_BUILD_DIR)/initrd.cpio )

include/netfilter.mk

@@ -253,8 +253,6 @@ $(eval $(call nf_add,IPT_LED,CONFIG_NETFILTER_XT_TARGET_LED, $(P_XT)xt_LED))
 # tee
 
 $(eval $(call nf_add,IPT_TEE,CONFIG_NETFILTER_XT_TARGET_TEE, $(P_XT)xt_TEE))
-$(eval $(if $(NF_KMOD),$(call nf_add,IPT_TEE,CONFIG_NF_DUP_IPV4, $(P_V4)nf_dup_ipv4),))
-$(eval $(if $(NF_KMOD),$(call nf_add,IPT_TEE,CONFIG_NF_DUP_IPV6, $(P_V6)nf_dup_ipv6),))
 
 # u32
 

include/package-defaults.mk

@@ -20,7 +20,7 @@ define Package/Default
   PROVIDES:=
   EXTRA_DEPENDS:=
   MAINTAINER:=$(PKG_MAINTAINER)
-  SOURCE:=$(patsubst $(TOPDIR)/%,%,$(CURDIR))
+  SOURCE:=$(patsubst $(TOPDIR)/%,%,$(patsubst $(TOPDIR)/package/%,feeds/base/%,$(CURDIR)))
   ifneq ($(PKG_VERSION),)
     ifneq ($(PKG_RELEASE),)
       VERSION:=$(PKG_VERSION)-$(PKG_RELEASE)

include/package-dumpinfo.mk

@@ -36,6 +36,8 @@ $(if $(USERID),Require-User: $(USERID)
 )Source: $(PKG_SOURCE)
 $(if $(LICENSE),License: $(LICENSE)
 )$(if $(LICENSE_FILES),LicenseFiles: $(LICENSE_FILES)
+)$(if $(PKG_CPE_ID),CPE-ID: $(PKG_CPE_ID)
+)$(if $(ABI_VERSION),ABI-Version: $(ABI_VERSION)
 )Type: $(if $(Package/$(1)/targets),$(Package/$(1)/targets),$(if $(PKG_TARGETS),$(PKG_TARGETS),ipkg))
 $(if $(KCONFIG),Kernel-Config: $(KCONFIG)
 )$(if $(BUILDONLY),Build-Only: $(BUILDONLY)

include/prereq.mk

@@ -107,16 +107,9 @@ define SetupHostCommand
 			bin="$$$$$$$$(command -v "$$$$$$$${cmd%% *}")"; \
 			if [ -x "$$$$$$$$bin" ] && eval "$$$$$$$$cmd" >/dev/null 2>/dev/null; then \
 				case "$$$$$$$$(ls -dl -- $(STAGING_DIR_HOST)/bin/$(strip $(1)))" in \
-					*" -> $$$$$$$$bin"*) \
-						[ -x "$(STAGING_DIR_HOST)/bin/$(strip $(1))" ] && exit 0 \
-						;; \
-					"-"*) \
-						find "$(STAGING_DIR_HOST)/stamp" | grep $(strip $(1)) && \
-						[ -x "$(STAGING_DIR_HOST)/bin/$(strip $(1))" ] && exit 0 \
-						;; \
-					*" -> /"*) \
-						;; \
-					*" -> "*) \
+					"-"* | \
+					*" -> $$$$$$$$bin"* | \
+					*" -> "[!/]*) \
 						[ -x "$(STAGING_DIR_HOST)/bin/$(strip $(1))" ] && exit 0 \
 						;; \
 				esac; \

include/quilt.mk

@@ -34,8 +34,8 @@ endif
 ifneq ($(if $(DUMP),1,$(__quilt_inc)),1)
 __quilt_inc:=1
 
-PATCH_DIR?=./patches
-FILES_DIR?=./files
+PATCH_DIR?=$(CURDIR)/patches
+FILES_DIR?=$(CURDIR)/files
 HOST_PATCH_DIR?=$(PATCH_DIR)
 HOST_FILES_DIR?=$(FILES_DIR)
 
@@ -106,13 +106,14 @@ define Kernel/Patch/Default
 endef
 
 define Quilt/RefreshDir
-	mkdir -p $(2)
-	-rm -f $(2)/* 2>/dev/null >/dev/null
-	@( \
+	-rm -rf $(2) 2>/dev/null >/dev/null
+	[ -f $(1)/.quilt_no_patch ] || mkdir -p $(2)
+	@[ -f $(1)/.quilt_no_patch ] || { \
 		for patch in $$$$($(if $(3),grep "^$(3)",cat) $(1)/patches/series | awk '{print $$$$1}'); do \
 			$(CP) -v "$(1)/patches/$$$$patch" $(2); \
 		done; \
-	)
+	}
+	@-rm -f $(1)/.quilt_no_patch 2>/dev/null >/dev/null;
 endef
 
 define Quilt/Refresh/Host
@@ -156,7 +157,7 @@ define Quilt/Template
 	}
 	@[ -f "$(1)/patches/series" ] || { \
 		echo "The source directory contains no quilt patches."; \
-		false; \
+		touch $(1)/patches/series $(1)/.quilt_no_patch; \
 	}
 	@[ -n "$$$$(ls $(1)/patches/series)" -o \
 	   "$$$$(cat $(1)/patches/series | $(MKHASH) md5)" = "$$(sort $(1)/patches/series | $(MKHASH) md5)" ] || { \
@@ -165,10 +166,12 @@ define Quilt/Template
 	}
 
   $(3)refresh: $(3)quilt-check
-	@cd "$(1)"; $(QUILT_CMD) pop -a -f >/dev/null 2>/dev/null
-	@cd "$(1)"; while $(QUILT_CMD) next 2>/dev/null >/dev/null && $(QUILT_CMD) push; do \
-		QUILT_DIFF_OPTS="-p" $(QUILT_CMD) refresh -p ab --no-index --no-timestamps; \
-	done; ! $(QUILT_CMD) next 2>/dev/null >/dev/null
+	@[ -f $(1)/.quilt_no_patch ] || { \
+		cd "$(1)"; $(QUILT_CMD) pop -a -f >/dev/null 2>/dev/null; \
+		while $(QUILT_CMD) next 2>/dev/null >/dev/null && $(QUILT_CMD) push; do \
+			QUILT_DIFF_OPTS="-p" $(QUILT_CMD) refresh -p ab --no-index --no-timestamps; \
+		done; ! $(QUILT_CMD) next 2>/dev/null >/dev/null; \
+	}
 	$(Quilt/Refresh/$(4))
 	
   $(3)update: $(3)quilt-check

include/scan.mk

@@ -50,7 +50,8 @@ define PackageDir
 		$$(call progress,Collecting $(SCAN_NAME) info: $(SCAN_DIR)/$(2)) \
 		echo Source-Makefile: $(SCAN_DIR)/$(2)/Makefile; \
 		$(if $(3),echo Override: $(3),true); \
-		$(NO_TRACE_MAKE) --no-print-dir -r DUMP=1 FEED="$(call feedname,$(2))" -C $(SCAN_DIR)/$(2) $(SCAN_MAKEOPTS) 2>/dev/null || { \
+		$(if $(findstring c,$(OPENWRT_VERBOSE)),$(MAKE),$(NO_TRACE_MAKE) --no-print-dir) -r DUMP=1 FEED="$(call feedname,$(2))" -C $(SCAN_DIR)/$(2) $(SCAN_MAKEOPTS) \
+			$(if $(findstring c,$(OPENWRT_VERBOSE)),,2>/dev/null) || { \
 			mkdir -p "$(TOPDIR)/logs/$(SCAN_DIR)/$(2)"; \
 			$(NO_TRACE_MAKE) --no-print-dir -r DUMP=1 FEED="$(call feedname,$(2))" -C $(SCAN_DIR)/$(2) $(SCAN_MAKEOPTS) > $(TOPDIR)/logs/$(SCAN_DIR)/$(2)/dump.txt 2>&1; \
 			$$(call progress,ERROR: please fix $(SCAN_DIR)/$(2)/Makefile - see logs/$(SCAN_DIR)/$(2)/dump.txt for details\n) \

include/site/linux

@@ -37,7 +37,7 @@ ac_cv_func_rindex=yes
 ac_cv_func_setlocale=yes
 ac_cv_func_setgrent_void=yes
 ac_cv_func_setpgrp_void=yes
-ac_cv_func_setresuid=no
+ac_cv_func_setresuid=yes
 ac_cv_func_setvbuf_reversed=no
 ac_cv_func_stat_empty_string_bug=no
 ac_cv_func_stat_ignores_trailing_slash=no

include/subdir.mk

@@ -5,6 +5,9 @@
 ifeq ($(MAKECMDGOALS),prereq)
   SUBTARGETS:=prereq
   PREREQ_ONLY:=1
+# For target/linux related target add dtb to selectively compile dtbs
+else ifneq ($(filter target/linux/%,$(MAKECMDGOALS)),)
+  SUBTARGETS:=$(DEFAULT_SUBDIR_TARGETS) dtb
 else
   SUBTARGETS:=$(DEFAULT_SUBDIR_TARGETS)
 endif

include/target.mk

@@ -316,7 +316,15 @@ ifeq ($(DUMP),1)
     ifneq ($(CONFIG_CPU_MIPS32_R2),)
       FEATURES += mips16
     endif
-    FEATURES += $(foreach v,6 7,$(if $(CONFIG_CPU_V$(v)),arm_v$(v)))
+    ifneq ($(CONFIG_CPU_V6),)
+      FEATURES += arm_v6
+    endif
+    ifneq ($(CONFIG_CPU_V6K),)
+      FEATURES += arm_v6
+    endif
+    ifneq ($(CONFIG_CPU_V7),)
+      FEATURES += arm_v7
+    endif
 
     # remove duplicates
     FEATURES:=$(sort $(FEATURES))

include/toplevel.mk

@@ -77,7 +77,8 @@ _ignore = $(foreach p,$(IGNORE_PACKAGES),--ignore $(p))
 
 prepare-tmpinfo: FORCE
 	@+$(MAKE) -r -s $(STAGING_DIR_HOST)/.prereq-build $(PREP_MK)
-	mkdir -p tmp/info
+	mkdir -p tmp/info feeds
+	[ -e $(TOPDIR)/feeds/base ] || ln -sf $(TOPDIR)/package $(TOPDIR)/feeds/base
 	$(_SINGLE)$(NO_TRACE_MAKE) -j1 -r -s -f include/scan.mk SCAN_TARGET="packageinfo" SCAN_DIR="package" SCAN_NAME="package" SCAN_DEPTH=5 SCAN_EXTRA=""
 	$(_SINGLE)$(NO_TRACE_MAKE) -j1 -r -s -f include/scan.mk SCAN_TARGET="targetinfo" SCAN_DIR="target/linux" SCAN_NAME="target" SCAN_DEPTH=3 SCAN_EXTRA="" SCAN_MAKEOPTS="TARGET_BUILD=1"
 	for type in package target; do \

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),23.05.0)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),23.05-SNAPSHOT)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r23497-6637af95aa)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),$(REVISION))
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/23.05.0)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/23.05-SNAPSHOT)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/Makefile

@@ -59,6 +59,7 @@ $(curdir)/merge-index: $(curdir)/merge
 	(cd $(PACKAGE_DIR_ALL) && $(SCRIPT_DIR)/ipkg-make-index.sh . 2>&1 > Packages; )
 
 ifndef SDK
+  $(curdir)//compile = $(STAGING_DIR)/.prepared $(BIN_DIR)
   $(curdir)/compile: $(curdir)/system/opkg/host/compile
 endif
 
@@ -106,6 +107,14 @@ ifdef CONFIG_SIGNED_PACKAGES
 		$(STAGING_DIR_HOST)/bin/usign -S -m Packages -s $(BUILD_KEY); \
 	); done
 endif
+ifdef CONFIG_JSON_CYCLONEDX_SBOM
+	@echo Creating CycloneDX package SBOMs...
+	@for d in $(PACKAGE_SUBDIRS); do ( \
+		[ -d $$d ] && \
+			cd $$d || continue; \
+		$(SCRIPT_DIR)/package-metadata.pl pkgcyclonedxsbom Packages.manifest > Packages.bom.cdx.json || true; \
+	); done
+endif
 
 $(curdir)/flags-install:= -j1
 

package/base-files/files/lib/functions.sh

@@ -262,11 +262,6 @@ default_postinst() {
 
 	add_group_and_user "${pkgname}"
 
-	if [ -f "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" ]; then
-		( . "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" )
-		ret=$?
-	fi
-
 	if [ -d "$root/rootfs-overlay" ]; then
 		cp -R $root/rootfs-overlay/. $root/
 		rm -fR $root/rootfs-overlay/
@@ -292,6 +287,11 @@ default_postinst() {
 		rm -f /tmp/luci-indexcache
 	fi
 
+	if [ -f "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" ]; then
+		( . "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" )
+		ret=$?
+	fi
+
 	local shell="$(command -v bash)"
 	for i in $(grep -s "^/etc/init.d/" "$root$filelist"); do
 		if [ -n "$root" ]; then
@@ -371,7 +371,7 @@ group_add_next() {
 		return
 	fi
 	gids=$(cut -d: -f3 ${IPKG_INSTROOT}/etc/group)
-	gid=65536
+	gid=32768
 	while echo "$gids" | grep -q "^$gid$"; do
 		gid=$((gid + 1))
 	done
@@ -402,7 +402,7 @@ user_add() {
 	local rc
 	[ -z "$uid" ] && {
 		uids=$(cut -d: -f3 ${IPKG_INSTROOT}/etc/passwd)
-		uid=65536
+		uid=32768
 		while echo "$uids" | grep -q "^$uid$"; do
 			uid=$((uid + 1))
 		done

package/base-files/files/lib/functions/leds.sh

@@ -11,6 +11,36 @@ get_dt_led_path() {
 	echo "$ledpath"
 }
 
+get_dt_led_color_func() {
+	local enum
+	local func
+	local idx
+	local label
+
+	[ -e "$1/function" ] && func=$(cat "$1/function")
+	[ -e "$1/color" ] && idx=$((0x$(hexdump -n 4 -e '4/1 "%02x"' "$1/color")))
+	[ -e "$1/function-enumerator" ] && \
+		enum=$((0x$(hexdump -n 4 -e '4/1 "%02x"' "$1/function-enumerator")))
+
+	[ -z "$idx" ] && [ -z "$func" ] && return 2
+
+	if [ -n "$idx" ]; then
+		for color in "white" "red" "green" "blue" "amber" \
+			     "violet" "yellow" "ir" "multicolor" "rgb" \
+			     "purple" "orange" "pink" "cyan" "lime"
+		do
+			[ $idx -eq 0 ] && label="$color" && break
+			idx=$((idx-1))
+		done
+	fi
+
+	label="$label:$func"
+	[ -n "$enum" ] && label="$label-$enum"
+	echo "$label"
+
+	return 0
+}
+
 get_dt_led() {
 	local label
 	local ledpath=$(get_dt_led_path $1)
@@ -18,6 +48,7 @@ get_dt_led() {
 	[ -n "$ledpath" ] && \
 		label=$(cat "$ledpath/label" 2>/dev/null) || \
 		label=$(cat "$ledpath/chan-name" 2>/dev/null) || \
+		label=$(get_dt_led_color_func "$ledpath") || \
 		label=$(basename "$ledpath")
 
 	echo "$label"

package/base-files/files/lib/functions/system.sh

@@ -61,11 +61,21 @@ find_mtd_chardev() {
 	echo "${INDEX:+$PREFIX$INDEX}"
 }
 
+get_mac_ascii() {
+	local part="$1"
+	local key="$2"
+	local mac_dirty
+
+	mac_dirty=$(strings "$part" | sed -n 's/^'"$key"'=//p')
+
+	# "canonicalize" mac
+	[ -n "$mac_dirty" ] && macaddr_canonicalize "$mac_dirty"
+}
+
 mtd_get_mac_ascii() {
 	local mtdname="$1"
 	local key="$2"
 	local part
-	local mac_dirty
 
 	part=$(find_mtd_part "$mtdname")
 	if [ -z "$part" ]; then
@@ -73,10 +83,7 @@ mtd_get_mac_ascii() {
 		return
 	fi
 
-	mac_dirty=$(strings "$part" | sed -n 's/^'"$key"'=//p')
-
-	# "canonicalize" mac
-	[ -n "$mac_dirty" ] && macaddr_canonicalize "$mac_dirty"
+	get_mac_ascii "$part" "$key"
 }
 
 mtd_get_mac_encrypted_arcadyan() {
@@ -190,6 +197,20 @@ mtd_get_part_size() {
 	done < /proc/mtd
 }
 
+mmc_get_mac_ascii() {
+	local part_name="$1"
+	local key="$2"
+	local part
+
+	part=$(find_mmc_part "$part_name")
+	if [ -z "$part" ]; then
+		echo "mmc_get_mac_ascii: partition $part_name not found!" >&2
+		return
+	fi
+
+	get_mac_ascii "$part" "$key"
+}
+
 mmc_get_mac_binary() {
 	local part_name="$1"
 	local offset="$2"

package/base-files/files/lib/functions/uci-defaults.sh

@@ -107,7 +107,7 @@ ucidef_set_bridge_mac() {
 }
 
 ucidef_set_network_device_mac() {
-	json_select_object "network-device"
+	json_select_object "network_device"
 	json_select_object "${1}"
 	json_add_string macaddr "${2}"
 	json_select ..

package/base-files/files/lib/preinit/80_mount_root

@@ -9,7 +9,7 @@ missing_lines() {
 	IFS=":"
 	while read line; do
 		set -- $line
-		grep -q "^$1:" "$file2" || echo "$*"
+		grep -q "^$1:" "$file2" || echo "$line"
 	done < "$file1"
 	IFS="$oIFS"
 }

package/base-files/image-config.in

@@ -190,7 +190,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/releases/23.05.0"
+		default "https://downloads.openwrt.org/releases/23.05-SNAPSHOT"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:
@@ -266,7 +266,7 @@ if VERSIONOPT
 	config VERSION_CODE_FILENAMES
 		bool
 		prompt "Revision code in filenames"
-		default n
+		default y
 		help
 			Enable this to include the revision identifier or the configured
 			version code into the firmware image, SDK- and Image Builder archive

package/boot/arm-trusted-firmware-mediatek/Makefile

@@ -94,6 +94,22 @@ define Trusted-Firmware-A/mt7622-sdmmc-2ddr
   DDR3_FLYBY:=1
 endef
 
+define Trusted-Firmware-A/mt7981-emmc-ddr4
+  NAME:=MediaTek MT7981 (eMMC, DDR4)
+  BOOT_DEVICE:=emmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+endef
+
+define Trusted-Firmware-A/mt7981-spim-nand-ddr4
+  NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR4)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+endef
+
 define Trusted-Firmware-A/mt7981-nor-ddr3
   NAME:=MediaTek MT7981 (SPI-NOR, DDR3)
   BOOT_DEVICE:=nor
@@ -118,7 +134,7 @@ define Trusted-Firmware-A/mt7981-sdmmc-ddr3
   DDR_TYPE:=ddr3
 endef
 
-define Trusted-Firmware-A/mt7986-snand-ddr3
+define Trusted-Firmware-A/mt7981-snand-ddr3
   NAME:=MediaTek MT7981 (SPI-NAND via SNFI, DDR3)
   BOOT_DEVICE:=snand
   BUILD_SUBTARGET:=filogic
@@ -175,6 +191,15 @@ define Trusted-Firmware-A/mt7986-spim-nand-ddr4
   NAND_TYPE:=spim:2k+64
 endef
 
+define Trusted-Firmware-A/mt7986-spim-nand-4k-ddr4
+  NAME:=MediaTek MT7986 (SPI-NAND via SPIM, DDR4)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7986
+  DDR_TYPE:=ddr4
+  NAND_TYPE:=spim:4k+256
+endef
+
 define Trusted-Firmware-A/mt7986-nor-ddr3
   NAME:=MediaTek MT7986 (SPI-NOR, DDR3)
   BOOT_DEVICE:=nor
@@ -347,8 +372,10 @@ TFA_TARGETS:= \
 	mt7981-emmc-ddr3 \
 	mt7981-nor-ddr3 \
 	mt7981-sdmmc-ddr3 \
-	mt7986-snand-ddr3 \
+	mt7981-snand-ddr3 \
 	mt7981-spim-nand-ddr3 \
+	mt7981-emmc-ddr4 \
+	mt7981-spim-nand-ddr4 \
 	mt7986-emmc-ddr3 \
 	mt7986-nor-ddr3 \
 	mt7986-sdmmc-ddr3 \
@@ -359,6 +386,7 @@ TFA_TARGETS:= \
 	mt7986-sdmmc-ddr4 \
 	mt7986-snand-ddr4 \
 	mt7986-spim-nand-ddr4 \
+	mt7986-spim-nand-4k-ddr4 \
 	mt7988-emmc-ddr3 \
 	mt7988-nor-ddr3 \
 	mt7988-sdmmc-ddr3 \

package/boot/uboot-envtools/files/ath79

@@ -119,6 +119,10 @@ domywifi,dw33d)
 glinet,gl-ar150)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x10000"
 	;;
+huawei,ap5030dn|\
+huawei,ap6010dn)
+	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x20000" "0x20000"
+	;;
 netgear,wndr3700|\
 netgear,wndr3700-v2|\
 netgear,wndrmac-v1)
@@ -157,6 +161,7 @@ ruckus,zf7372)
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x40000" "0x10000"
 	;;
 sophos,ap15|\
+sophos,ap15c|\
 sophos,ap55|\
 sophos,ap55c|\
 sophos,ap100|\

package/boot/uboot-envtools/files/kirkwood

@@ -17,6 +17,7 @@ cloudengines,pogoe02|\
 cloudengines,pogoplugv4|\
 globalscale,sheevaplug|\
 iom,ix2-200|\
+iom,ix4-200d|\
 linksys,e4200-v2|\
 linksys,ea4500|\
 netgear,readynas-duo-v2|\

package/boot/uboot-envtools/files/mediatek_filogic

@@ -12,6 +12,9 @@ touch /etc/config/ubootenv
 board=$(board_name)
 
 case "$board" in
+asus,rt-ax59u)
+	ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
+	;;
 bananapi,bpi-r3)
 	rootdev="$(cmdline_get_var root)"
 	rootdev="${rootdev##*/}"
@@ -37,27 +40,43 @@ bananapi,bpi-r3)
 		;;
 	esac
 	;;
-glinet,gl-mt3000)
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
+cmcc,rax3000m)
+	case "$(cmdline_get_var root)" in
+	/dev/mmc*)
+		local envdev=$(find_mmc_part "ubootenv" "mmcblk0")
+		ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1"
+		ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1"
+		;;
+	*)
+		. /lib/upgrade/nand.sh
+		local envubi=$(nand_find_ubi ubi)
+		local envdev=/dev/$(nand_find_volume $envubi ubootenv)
+		local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
+		ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x1f000" "1"
+		ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x1f000" "1"
+		;;
+	esac
 	;;
-mercusys,mr90x-v1)
-	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
-	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
+comfast,cf-e393ax)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
 	;;
-netgear,wax220)
+cetron,ct3003|\
+netgear,wax220|\
+zbtlink,zbt-z8102ax|\
+zbtlink,zbt-z8103ax)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;
-xiaomi,mi-router-wr30u-112m-nmbm|\
-xiaomi,mi-router-wr30u-stock|\
-xiaomi,redmi-router-ax6000-stock)
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
-	ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
+dlink,aquila-pro-ai-m30-a1)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
 	;;
 h3c,magic-nx30-pro|\
+jcg,q30-pro|\
+netcore,n60|\
 qihoo,360t7|\
 tplink,tl-xdr4288|\
 tplink,tl-xdr6086|\
 tplink,tl-xdr6088|\
+xiaomi,mi-router-ax3000t-ubootmod|\
 xiaomi,mi-router-wr30u-ubootmod|\
 xiaomi,redmi-router-ax6000-ubootmod)
 	. /lib/upgrade/nand.sh
@@ -67,10 +86,47 @@ xiaomi,redmi-router-ax6000-ubootmod)
 	ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x20000" "1"
 	ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x20000" "1"
 	;;
+glinet,gl-mt3000)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
+	;;
+glinet,gl-mt6000)
+	local envdev=$(find_mmc_part "u-boot-env")
+	ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
+	;;
+jdcloud,re-cp-03)
+	local envdev=$(find_mmc_part "ubootenv" "mmcblk0")
+	ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1"
+	ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1"
+	;;
+mercusys,mr90x-v1|\
+routerich,ax3000)
+	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
+	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
+	;;
+ubnt,unifi-6-plus)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
+	;;
+xiaomi,mi-router-ax3000t|\
+xiaomi,mi-router-wr30u-stock|\
+xiaomi,redmi-router-ax6000-stock)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
+	ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
+	;;
 zyxel,ex5601-t0)
 	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
 	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x40000" "2"
 	;;
+zyxel,ex5601-t0-ubootmod)
+        . /lib/upgrade/nand.sh
+        local envubi=$(nand_find_ubi ubi)
+        local envdev=/dev/$(nand_find_volume $envubi ubootenv)
+        local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
+        ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x20000" "1"
+        ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x20000" "1"
+        ;;
+zyxel,ex5700-telenor)
+	ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1"
+	;;
 esac
 
 config_load ubootenv

package/boot/uboot-envtools/files/mediatek_mt7622

@@ -12,6 +12,10 @@ touch /etc/config/ubootenv
 board=$(board_name)
 
 case "$board" in
+dlink,eagle-pro-ai-m32-a1|\
+dlink,eagle-pro-ai-r32-a1)
+	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x2000" "0x2000"
+	;;
 linksys,e8450-ubi)
 	ubootenv_add_uci_config "/dev/ubi0_0" "0x0" "0x1f000" "0x1f000" "1"
 	ubootenv_add_uci_config "/dev/ubi0_1" "0x0" "0x1f000" "0x1f000" "1"

package/boot/uboot-envtools/files/ramips

@@ -20,6 +20,7 @@ alfa-network,tube-e4g|\
 engenius,epg600|\
 engenius,esr600h|\
 linksys,re7000|\
+meig,slt866|\
 sitecom,wlr-4100-v1-002|\
 zyxel,keenetic-lite-iii-a)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x1000"
@@ -31,7 +32,8 @@ allnet,all5002|\
 yuncore,ax820)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
-arcadyan,we420223-99)
+arcadyan,we420223-99|\
+dlink,dir-806a-b1)
 	ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x1000" "0x1000"
 	;;
 ampedwireless,ally-00x19k|\
@@ -42,6 +44,7 @@ beeline,smartbox-giga|\
 beeline,smartbox-turbo|\
 beeline,smartbox-turbo-plus|\
 etisalat,s3|\
+rostelecom,rt-fe-1a|\
 rostelecom,rt-sf-1)
 	ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000"
 	;;
@@ -72,7 +75,9 @@ h3c,tx1801-plus|\
 h3c,tx1806|\
 jcg,q20|\
 linksys,e7350|\
+netgear,eax12|\
 netgear,wax202|\
+netis,n6|\
 zyxel,wsm20)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;

package/boot/uboot-mediatek/Makefile

@@ -200,6 +200,30 @@ define U-Boot/mt7629_rfb
   UBOOT_CONFIG:=mt7629_rfb
 endef
 
+define U-Boot/mt7981_cmcc_rax3000m-emmc
+  NAME:=CMCC RAX3000M
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=cmcc_rax3000m
+  UBOOT_CONFIG:=mt7981_cmcc_rax3000m-emmc
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr4
+endef
+
+define U-Boot/mt7981_cmcc_rax3000m-nand
+  NAME:=CMCC RAX3000M
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=cmcc_rax3000m
+  UBOOT_CONFIG:=mt7981_cmcc_rax3000m-nand
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr4
+endef
+
 define U-Boot/mt7981_h3c_magic-nx30-pro
   NAME:=H3C Magic NX30 Pro
   BUILD_SUBTARGET:=filogic
@@ -212,6 +236,78 @@ define U-Boot/mt7981_h3c_magic-nx30-pro
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_jcg_q30-pro
+  NAME:=JCG Q30 PRO
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=jcg_q30-pro
+  UBOOT_CONFIG:=mt7981_jcg_q30-pro
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
+define U-Boot/mt7981_rfb-spim-nand
+  NAME:=MT7981 Reference Board
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mediatek_mt7981-rfb
+  UBOOT_CONFIG:=mt7981_rfb
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
+define U-Boot/mt7981_rfb-emmc
+  NAME:=MT7981 Reference Board
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mediatek_mt7981-rfb
+  UBOOT_CONFIG:=mt7981_emmc_rfb
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr3
+endef
+
+define U-Boot/mt7981_rfb-nor
+  NAME:=MT7981 Reference Board
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mediatek_mt7981-rfb
+  UBOOT_CONFIG:=mt7981_nor_rfb
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-nor-ddr3
+endef
+
+define U-Boot/mt7981_rfb-sd
+  NAME:=MT7981 Reference Board
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mediatek_mt7981-rfb
+  UBOOT_CONFIG:=mt7981_sd_rfb
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=sdmmc
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-sdmmc-ddr3
+endef
+
+define U-Boot/mt7981_rfb-snfi
+  NAME:=MT7981 Reference Board
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mediatek_mt7981-rfb
+  UBOOT_CONFIG:=mt7981_snfi_nand_rfb
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=snand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-snand-ddr3
+endef
+
 define U-Boot/mt7981_qihoo_360t7
   NAME:=Qihoo 360T7
   BUILD_SUBTARGET:=filogic
@@ -224,6 +320,18 @@ define U-Boot/mt7981_qihoo_360t7
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_xiaomi_mi-router-ax3000t
+  NAME:=Xiaomi Router AX3000T
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=xiaomi_mi-router-ax3000t-ubootmod
+  UBOOT_CONFIG:=mt7981_xiaomi_mi-router-ax3000t
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
 define U-Boot/mt7981_xiaomi_mi-router-wr30u
   NAME:=Xiaomi Router WR30U
   BUILD_SUBTARGET:=filogic
@@ -297,6 +405,42 @@ define U-Boot/mt7986_bananapi_bpi-r3-nor
   FIP_COMPRESS:=1
 endef
 
+define U-Boot/mt7986_glinet_gl-mt6000
+  NAME:=GL.iNet GL-MT6000
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=glinet_gl-mt6000
+  UBOOT_CONFIG:=mt7986a_glinet_gl-mt6000
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
+endef
+
+define U-Boot/mt7986_jdcloud_re-cp-03
+  NAME:=JDCloud RE-CP-03
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=jdcloud_re-cp-03
+  UBOOT_CONFIG:=mt7986a_jdcloud_re-cp-03
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
+endef
+
+define U-Boot/mt7986_netcore_n60
+  NAME:=Netcore N60
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=netcore_n60
+  UBOOT_CONFIG:=mt7986_netcore_n60
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr3
+endef
+
 define U-Boot/mt7986_tplink_tl-xdr4288
   NAME:=TP-LINK TL-XDR4288
   BUILD_SUBTARGET:=filogic
@@ -345,6 +489,18 @@ define U-Boot/mt7986_xiaomi_redmi-router-ax6000
   DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr4
 endef
 
+define U-Boot/mt7986_zyxel_ex5601-t0
+  NAME:=Zyxel EX5601-T0
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=zyxel_ex5601-t0-ubootmod
+  UBOOT_CONFIG:=mt7986_zyxel_ex5601-t0
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand-4k
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-4k-ddr4
+endef
+
 define U-Boot/mt7988_rfb-spim-nand
   NAME:=MT7988 Reference Board
   BUILD_SUBTARGET:=filogic
@@ -424,17 +580,30 @@ UBOOT_TARGETS := \
 	mt7628_rfb \
 	ravpower_rp-wd009 \
 	mt7629_rfb \
+	mt7981_cmcc_rax3000m-emmc \
+	mt7981_cmcc_rax3000m-nand \
 	mt7981_h3c_magic-nx30-pro \
+	mt7981_jcg_q30-pro \
+	mt7981_rfb-spim-nand \
+	mt7981_rfb-emmc \
+	mt7981_rfb-nor \
+	mt7981_rfb-sd \
+	mt7981_rfb-snfi \
 	mt7981_qihoo_360t7 \
+	mt7981_xiaomi_mi-router-ax3000t \
 	mt7981_xiaomi_mi-router-wr30u \
 	mt7986_bananapi_bpi-r3-emmc \
 	mt7986_bananapi_bpi-r3-sdmmc \
 	mt7986_bananapi_bpi-r3-snand \
 	mt7986_bananapi_bpi-r3-nor \
+	mt7986_glinet_gl-mt6000 \
+	mt7986_jdcloud_re-cp-03 \
+	mt7986_netcore_n60 \
 	mt7986_tplink_tl-xdr4288 \
 	mt7986_tplink_tl-xdr6086 \
 	mt7986_tplink_tl-xdr6088 \
 	mt7986_xiaomi_redmi-router-ax6000 \
+	mt7986_zyxel_ex5601-t0 \
 	mt7986_rfb \
 	mt7988_rfb-spim-nand \
 	mt7988_rfb-snand \

package/boot/uboot-mediatek/patches/106-configs-sync-mt7981-rfb-storage.patch

@@ -0,0 +1,129 @@
+--- a/configs/mt7981_rfb_defconfig
++++ b/configs/mt7981_rfb_defconfig
+@@ -30,6 +30,9 @@ CONFIG_CMD_MTD=y
+ CONFIG_CMD_SF_TEST=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
+ CONFIG_REGMAP=y
+--- a/configs/mt7981_snfi_nand_rfb_defconfig
++++ b/configs/mt7981_snfi_nand_rfb_defconfig
+@@ -1,11 +1,12 @@
+ CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+ CONFIG_POSITION_INDEPENDENT=y
+ CONFIG_ARCH_MEDIATEK=y
+ CONFIG_TEXT_BASE=0x41e00000
+ CONFIG_SYS_MALLOC_F_LEN=0x4000
+ CONFIG_NR_DRAM_BANKS=1
+-CONFIG_ENV_SIZE=0x20000
+ CONFIG_DEFAULT_DEVICE_TREE="mt7981-snfi-nand-rfb"
++CONFIG_SYS_PROMPT="MT7981> "
+ CONFIG_TARGET_MT7981=y
+ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+@@ -15,7 +16,6 @@ CONFIG_DEBUG_UART=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-snfi-nand-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+-CONFIG_SYS_PROMPT="MT7981> "
+ CONFIG_SYS_CBSIZE=512
+ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_NETBSD is not set
+@@ -29,8 +29,6 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MTD=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_SMC=y
+-CONFIG_MTDIDS_DEFAULT="spi-nand0=spi-nand0"
+-CONFIG_MTDPARTS_DEFAULT="spi-nand0:1024k(bl2),512k(u-boot-env),2048k(factory),2048k(fip),65536k(ubi)"
+ CONFIG_CMD_UBI=y
+ CONFIG_CMD_UBI_RENAME=y
+ CONFIG_ENV_OVERWRITE=y
+@@ -45,7 +43,6 @@ CONFIG_DM_MTD=y
+ CONFIG_MTK_SPI_NAND=y
+ CONFIG_MTK_SPI_NAND_MTD=y
+ CONFIG_PHY_FIXED=y
+-CONFIG_DM_ETH=y
+ CONFIG_MEDIATEK_ETH=y
+ CONFIG_PINCTRL=y
+ CONFIG_PINCONF=y
+@@ -55,3 +52,4 @@ CONFIG_MTK_POWER_DOMAIN=y
+ CONFIG_DM_SERIAL=y
+ CONFIG_MTK_SERIAL=y
+ CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/configs/mt7981_nor_rfb_defconfig
+@@ -0,0 +1,68 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-rfb"
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_TARGET_MT7981=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++# CONFIG_AUTOBOOT is not set
++CONFIG_DEFAULT_FDT_FILE="mt7981-rfb"
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++# CONFIG_BOOTM_NETBSD is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_CMD_ELF is not set
++# CONFIG_CMD_UNLZ4 is not set
++# CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_SMC=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SPI_FLASH_SFDP_SUPPORT=y
++CONFIG_SPI_FLASH_EON=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_ISSI=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XMC=y
++CONFIG_SPI_FLASH_XTX=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64

package/boot/uboot-mediatek/patches/107-configs-add-useful-options-to-mt7981-rfb.patch

@@ -0,0 +1,474 @@
+--- a/configs/mt7981_emmc_rfb_defconfig
++++ b/configs/mt7981_emmc_rfb_defconfig
+@@ -14,7 +14,22 @@ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+ CONFIG_SYS_LOAD_ADDR=0x46000000
+ CONFIG_DEBUG_UART=y
+-# CONFIG_AUTOBOOT is not set
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_MMC_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-emmc-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+@@ -24,9 +39,23 @@ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_PLAN9 is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+-# CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_UNLZ4 is not set
+ # CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_UUID=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_GPT=y
+ CONFIG_CMD_GPT_RENAME=y
+@@ -36,13 +65,35 @@ CONFIG_CMD_PART=y
+ CONFIG_CMD_READ=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
+ CONFIG_CMD_FAT=y
+ CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
+ CONFIG_PARTITION_TYPE_GUID=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_IS_IN_MMC=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGEX=y
+ CONFIG_REGMAP=y
+ CONFIG_SYSCON=y
+ CONFIG_CLK=y
+--- a/configs/mt7981_rfb_defconfig
++++ b/configs/mt7981_rfb_defconfig
+@@ -12,7 +12,23 @@ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+ CONFIG_SYS_LOAD_ADDR=0x46000000
+ CONFIG_DEBUG_UART=y
+-# CONFIG_AUTOBOOT is not set
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SPI_BOOT=y
++CONFIG_NAND_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+@@ -22,23 +38,74 @@ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_PLAN9 is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+-# CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_UNLZ4 is not set
+ # CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MTD=y
+-CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++# CONFIG_MTD_RAW_NAND is not set
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
+ CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
+ CONFIG_CMD_SMC=y
+ CONFIG_CMD_UBI=y
+ CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGEX=y
+ CONFIG_REGMAP=y
+ CONFIG_SYSCON=y
+ CONFIG_CLK=y
+ # CONFIG_MMC is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_MTD=y
+ CONFIG_DM_MTD=y
+ CONFIG_MTD_SPI_NAND=y
+--- a/configs/mt7981_sd_rfb_defconfig
++++ b/configs/mt7981_sd_rfb_defconfig
+@@ -14,7 +14,22 @@ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+ CONFIG_SYS_LOAD_ADDR=0x46000000
+ CONFIG_DEBUG_UART=y
+-# CONFIG_AUTOBOOT is not set
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_MMC_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-sd-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+@@ -24,9 +39,23 @@ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_PLAN9 is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+-# CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_UNLZ4 is not set
+ # CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_UUID=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_GPT=y
+ CONFIG_CMD_GPT_RENAME=y
+@@ -36,13 +65,35 @@ CONFIG_CMD_PART=y
+ CONFIG_CMD_READ=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
+ CONFIG_CMD_FAT=y
+ CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
+ CONFIG_PARTITION_TYPE_GUID=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_IS_IN_MMC=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGEX=y
+ CONFIG_REGMAP=y
+ CONFIG_SYSCON=y
+ CONFIG_CLK=y
+--- a/configs/mt7981_snfi_nand_rfb_defconfig
++++ b/configs/mt7981_snfi_nand_rfb_defconfig
+@@ -12,7 +12,23 @@ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+ CONFIG_SYS_LOAD_ADDR=0x46000000
+ CONFIG_DEBUG_UART=y
+-# CONFIG_AUTOBOOT is not set
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SPI_BOOT=y
++CONFIG_NAND_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-snfi-nand-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+@@ -22,22 +38,73 @@ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_PLAN9 is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+-# CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_UNLZ4 is not set
+ # CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MTD=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++# CONFIG_MTD_RAW_NAND is not set
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
+ CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
+ CONFIG_CMD_SMC=y
+ CONFIG_CMD_UBI=y
+ CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
+ CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGEX=y
+ CONFIG_REGMAP=y
+ CONFIG_SYSCON=y
+ CONFIG_CLK=y
+ # CONFIG_MMC is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_MTD=y
+ CONFIG_DM_MTD=y
+ CONFIG_MTK_SPI_NAND=y
+--- a/configs/mt7981_nor_rfb_defconfig
++++ b/configs/mt7981_nor_rfb_defconfig
+@@ -12,7 +12,22 @@ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+ CONFIG_SYS_LOAD_ADDR=0x46000000
+ CONFIG_DEBUG_UART=y
+-# CONFIG_AUTOBOOT is not set
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SPI_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+@@ -22,21 +37,66 @@ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_PLAN9 is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+-# CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_UNLZ4 is not set
+ # CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MTD=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF=y
+ CONFIG_CMD_SF_TEST=y
+ CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
+ CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_ENV_IS_IN_MTD=y
++CONFIG_ENV_MTD_NAME="u-boot-env"
++CONFIG_ENV_SIZE_REDUND=0x4000
++CONFIG_ENV_SIZE=0x4000
++CONFIG_ENV_OFFSET=0x0
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGEX=y
+ CONFIG_REGMAP=y
+ CONFIG_SYSCON=y
+ CONFIG_CLK=y
+ # CONFIG_MMC is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_MTD=y
+ CONFIG_DM_MTD=y
+ CONFIG_MTD_SPI_NAND=y

package/boot/uboot-mediatek/patches/108-dts-arm64-mt7981-rfb-add-mtd-partitions.patch

@@ -0,0 +1,140 @@
+--- a/arch/arm/dts/mt7981-rfb.dts
++++ b/arch/arm/dts/mt7981-rfb.dts
+@@ -143,6 +143,37 @@
+ 		compatible = "spi-nand";
+ 		reg = <0>;
+ 		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x00000 0x0100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x0100000 0x0080000>;
++			};
++
++			factory: partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x0200000>;
++			};
++
++			partition@380000 {
++				label = "FIP";
++				reg = <0x380000 0x0200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x4000000>;
++			};
++		};
+ 	};
+ };
+ 
+@@ -164,6 +195,37 @@
+ 		compatible = "jedec,spi-nor";
+ 		reg = <0>;
+ 		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@00000 {
++				label = "BL2";
++				reg = <0x00000 0x0040000>;
++			};
++
++			partition@40000 {
++				label = "u-boot-env";
++				reg = <0x40000 0x0010000>;
++			};
++
++			partition@50000 {
++				label = "Factory";
++				reg = <0x50000 0x00B0000>;
++			};
++
++			partition@100000 {
++				label = "FIP";
++				reg = <0x100000 0x0080000>;
++			};
++
++			partition@180000 {
++				label = "firmware";
++				reg = <0x180000 0xE00000>;
++			};
++		};
+ 	};
+ };
+ 
+--- a/arch/arm/dts/mt7981-snfi-nand-rfb.dts
++++ b/arch/arm/dts/mt7981-snfi-nand-rfb.dts
+@@ -107,11 +107,11 @@
+ 	};
+ 
+ 	mmc0_pins_default: mmc0default {
+-                mux {
+-                       function = "flash";
+-                       groups =  "emmc_45";
+-                 };
+-         };
++		mux {
++			function = "flash";
++			groups =  "emmc_45";
++		};
++	};
+ };
+ 
+ &snand {
+@@ -119,6 +119,42 @@
+ 	pinctrl-0 = <&snfi_pins>;
+ 	status = "okay";
+ 	quad-spi;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x00000 0x0100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x0100000 0x0080000>;
++			};
++
++			factory: partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x0200000>;
++			};
++
++			partition@380000 {
++				label = "FIP";
++				reg = <0x380000 0x0200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x4000000>;
++			};
++		};
++	};
+ };
+ 
+ &pwm {

package/boot/uboot-mediatek/patches/131-spi-mtk_spim-prevent-global-pll-clock-override.patch

@@ -0,0 +1,47 @@
+From 41f225dae30ea6ddcff10f120a9e732f994d3a07 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Nicol=C3=B2=20Veronese?= <nicveronese@gmail.com>
+Date: Tue, 3 Oct 2023 23:46:52 +0200
+Subject: [PATCH] spi: mtk_spim: prevent global pll clock override
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+With commit 793e6230118032a099ec42a1ea67f434721edcc0
+ a new system to calculate the SPI clocks has been added.
+
+Unfortunately, the do_div macro overrides the global
+ priv->pll_clk_rate field. This will cause to have a reduced
+ clock rate on each subsequent SPI call.
+
+Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
+Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
+---
+ drivers/spi/mtk_spim.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+--- a/drivers/spi/mtk_spim.c
++++ b/drivers/spi/mtk_spim.c
+@@ -409,7 +409,7 @@ static int mtk_spim_transfer_wait(struct
+ {
+ 	struct udevice *bus = dev_get_parent(slave->dev);
+ 	struct mtk_spim_priv *priv = dev_get_priv(bus);
+-	u32 sck_l, sck_h, clk_count, reg;
++	u32 pll_clk, sck_l, sck_h, clk_count, reg;
+ 	ulong us = 1;
+ 	int ret = 0;
+ 
+@@ -418,11 +418,12 @@ static int mtk_spim_transfer_wait(struct
+ 	else
+ 		clk_count = op->data.nbytes;
+ 
++	pll_clk = priv->pll_clk_rate;
+ 	sck_l = readl(priv->base + SPI_CFG2_REG) >> SPI_CFG2_SCK_LOW_OFFSET;
+ 	sck_h = readl(priv->base + SPI_CFG2_REG) & SPI_CFG2_SCK_HIGH_MASK;
+-	do_div(priv->pll_clk_rate, sck_l + sck_h + 2);
++	do_div(pll_clk, sck_l + sck_h + 2);
+ 
+-	us = CLK_TO_US(priv->pll_clk_rate, clk_count * 8);
++	us = CLK_TO_US(pll_clk, clk_count * 8);
+ 	us += 1000 * 1000; /* 1s tolerance */
+ 
+ 	if (us > UINT_MAX)

package/boot/uboot-mediatek/patches/200-cmd-add-imsz-and-imszb.patch

@@ -70,7 +70,7 @@
  {
 --- a/boot/image-fit.c
 +++ b/boot/image-fit.c
-@@ -2051,6 +2051,49 @@ static const char *fit_get_image_type_pr
+@@ -2051,6 +2051,47 @@ static const char *fit_get_image_type_pr
  	return "unknown";
  }
  
@@ -93,11 +93,8 @@
 +	max_size = hdrsize;
 +
 +	images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
-+	if (images_noffset < 0) {
-+		printf("Can't find images parent node '%s' (%s)\n",
-+		FIT_IMAGES_PATH, fdt_strerror(images_noffset));
-+		return 0;
-+	}
++	if (images_noffset < 0)
++		goto out;
 +
 +	for (ndepth = 0,
 +	     noffset = fdt_next_node(fit, images_noffset, &ndepth);
@@ -106,7 +103,7 @@
 +		if (ndepth == 1) {
 +			ret = fit_image_get_data_and_size(fit, noffset, &data, &data_size);
 +			if (ret)
-+				return 0;
++				goto out;
 +
 +			img_total = data_size + (data - fit);
 +
@@ -114,6 +111,7 @@
 +		}
 +	}
 +
++out:
 +	return max_size;
 +}
 +

package/boot/uboot-mediatek/patches/260-add-missing-type-u64.patch

@@ -1,10 +0,0 @@
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -1,6 +1,7 @@
- #ifndef _LINUX_TYPES_H
- #define _LINUX_TYPES_H
- 
-+typedef unsigned long long __u64;
- #include <linux/posix_types.h>
- #include <asm/types.h>
- #include <stdbool.h>

package/boot/uboot-mediatek/patches/429-add-netcore-n60.patch

@@ -0,0 +1,433 @@
+--- /dev/null
++++ b/configs/mt7986_netcore_n60_defconfig
+@@ -0,0 +1,182 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7986=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-netcore-n60"
++CONFIG_DEFAULT_ENV_FILE="netcore_n60_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-netcore-n60.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7986> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_USB=y
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-netcore-n60.dts
+@@ -0,0 +1,185 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2021 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7986.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Netcore N60";
++	compatible = "mediatek,mt7986", "mediatek,mt7986-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		factory {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		wps {
++			label = "wps";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		status_red {
++			label = "red:status";
++			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
++		};
++
++		status_green {
++			label = "green:status";
++			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "disabled";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_2";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	pwm_pins: pwm0-pins-func-1 {
++		mux {
++			function = "pwm";
++			groups = "pwm0";
++		};
++	};
++};
++
++&pwm {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm_pins>;
++	status = "okay";
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <1>;
++	sample_sel = <0>;
++
++	spi_nand@1 {
++		compatible = "spi-nand";
++		reg = <1>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "orig-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7280000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/netcore_n60_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-netcore_n60-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-netcore_n60-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-netcore_n60-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-netcore_n60-squashfs-sysupgrade.itb
++bootled_pwr=green:status
++bootled_rec=red:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
++ethaddr_factory=mtd read factory 0x40080000 0x1fe000 0x1000 && env readmem -b ethaddr 0x40080f20 0x6 ; setenv ethaddr_factory
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/431-add-xiaomi_redmi-ax6000.patch

@@ -239,12 +239,12 @@
 +&eth {
 +	status = "okay";
 +	mediatek,gmac-id = <0>;
-+	phy-mode = "sgmii";
++	phy-mode = "2500base-x";
 +	mediatek,switch = "mt7531";
 +	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 +
 +	fixed-link {
-+		speed = <1000>;
++		speed = <2500>;
 +		full-duplex;
 +	};
 +};

package/boot/uboot-mediatek/patches/436-add-glinet-mt6000.patch

@@ -0,0 +1,274 @@
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-glinet-gl-mt6000.dts
+@@ -0,0 +1,135 @@
++// SPDX-License-Identifier: GPL-2.0
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include <dt-bindings/gpio/gpio.h>
++
++#include "mt7986.dtsi"
++
++/ {
++	model = "GL.iNet GL-MT6000";
++	compatible = "glinet,gl-mt6000", "mediatek,mt7986-emmc-rfb", "mediatek,mt7986";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x40000000>;
++	};
++
++    reg_1p8v: regulator-1p8v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-1.8V";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	reg_3p3v: regulator-3p3v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-3.3V";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		wps {
++			label = "reset";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_blue: green {
++			label = "blue:status";
++			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_white: blue {
++			label = "white:status";
++			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	mmc0_pins_default: mmc0default {
++		mux {
++			function = "flash";
++			groups =  "emmc_51";
++		};
++
++		conf-cmd-dat {
++			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
++			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
++			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
++			input-enable;
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++
++		conf-clk {
++			pins = "EMMC_CK";
++			drive-strength = <MTK_DRIVE_6mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-dsl {
++			pins = "EMMC_DSL";
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-rst {
++			pins = "EMMC_RSTB";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++	};
++};
++
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_default>;
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	cap-mmc-highspeed;
++	cap-mmc-hw-reset;
++	vmmc-supply = <&reg_3p3v>;
++	vqmmc-supply = <&reg_1p8v>;
++	non-removable;
++	status = "okay";
++};
++
++&wmcpu_emi {
++	status = "disabled";
++};
+--- /dev/null
++++ b/configs/mt7986a_glinet_gl-mt6000_defconfig
+@@ -0,0 +1,105 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x80000
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-glinet-gl-mt6000"
++CONFIG_SYS_PROMPT="MT7986> "
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7986=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_AHCI=y
++CONFIG_FIT=y
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-glinet-gl-mt6000.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="glinet_gl-mt6000_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/glinet_gl-mt6000_env
+@@ -0,0 +1,25 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++bootdelay=3
++bootfile_bl2=openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip
++bootfile_firmware=openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_title=      *** U-Boot Boot Menu for GL-iNet GL-MT6000 ***
++bootmenu_0=Startup system (Default).=run boot_system
++bootmenu_1=Load Firmware via TFTP then write to eMMC.=run boot_tftp_firmware ; run bootmenu_confirm_return
++bootmenu_2=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_3=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_4=Reboot.=reset
++bootmenu_5=Reset all settings to factory defaults.=run reset_factory ; reset
++filesize_to_blk=setexpr cnt $filesize + 0x1ff && setexpr cnt $cnt / 0x200
++mmc_read_kernel=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr $part_addr $image_size
++boot_system=part start mmc 0 kernel part_addr && part size mmc 0 kernel part_size && run mmc_read_kernel && bootm
++boot_tftp_firmware=tftpboot $loadaddr $bootfile_firmware && run emmc_write_firmware
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++emmc_write_firmware=part start mmc 0 kernel part_addr && run filesize_to_blk && mmc write $loadaddr $part_addr $cnt
++emmc_write_bl2=run filesize_to_blk && test 0x$cnt -le 0x800 && mmc partconf 0 1 1 1 &&  && mmc write $loadaddr 0x0 0x800 ; mmc partconf 0 1 1 0
++emmc_write_fip=part start mmc 0 fip part_addr && part size mmc 0 fip part_size && run filesize_to_blk && test 0x$cnt -le 0x$part_size && mmc write $loadaddr $part_addr $cnt
++reset_factory=eraseenv && reset

package/boot/uboot-mediatek/patches/437-add-cmcc_rax3000m.patch

@@ -0,0 +1,697 @@
+--- /dev/null
++++ b/configs/mt7981_cmcc_rax3000m-emmc_defconfig
+@@ -0,0 +1,175 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7981=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cmcc-rax3000m-emmc"
++CONFIG_DEFAULT_ENV_FILE="cmcc_rax3000m-emmc_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cmcc-rax3000m-emmc.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MMC=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_MMC=y
++CONFIG_MMC_DEFAULT_DEV=1
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_MMC_SUPPORTS_TUNING=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_SPI=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_USB=y
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_ENV_OFFSET_REDUND=0x440000
++CONFIG_ENV_SIZE=0x40000
++CONFIG_ENV_SIZE_REDUND=0x40000
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_CMD_SF=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/configs/mt7981_cmcc_rax3000m-nand_defconfig
+@@ -0,0 +1,175 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7981=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cmcc-rax3000m-nand"
++CONFIG_DEFAULT_ENV_FILE="cmcc_rax3000m-nand_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cmcc-rax3000m-nand.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cmcc-rax3000m.dtsi
+@@ -0,0 +1,85 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "CMCC RAX3000M";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-mesh {
++			label = "mesh";
++			linux,code = <BTN_9>;
++			linux,input-type = <EV_SW>;
++			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "green:status";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led-1 {
++			label = "blue:status";
++			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
++		};
++
++		led-2 {
++			label = "red:status";
++			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cmcc-rax3000m-emmc.dts
+@@ -0,0 +1,53 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++/dts-v1/;
++#include "mt7981-cmcc-rax3000m.dtsi"
++
++/ {
++	reg_3p3v: regulator-3p3v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-3.3V";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++};
++
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_default>;
++	max-frequency = <26000000>;
++	bus-width = <8>;
++	cap-mmc-hw-reset;
++	vmmc-supply = <&reg_3p3v>;
++	non-removable;
++	status = "okay";
++};
++
++&pinctrl {
++	mmc0_pins_default: mmc0default {
++		mux {
++			function = "flash";
++			groups =  "emmc_45";
++		};
++		conf-cmd-dat {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO",
++				"SPI0_CS",  "SPI0_HOLD", "SPI0_WP",
++				"SPI1_CLK", "SPI1_MOSI", "SPI1_MISO";
++			input-enable;
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++		conf-clk {
++			pins = "SPI1_CS";
++			drive-strength = <MTK_DRIVE_6mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++		conf-rst {
++			pins = "PWM0";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++	};
++};
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cmcc-rax3000m-nand.dts
+@@ -0,0 +1,77 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++/dts-v1/;
++#include "mt7981-cmcc-rax3000m.dtsi"
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "orig-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7200000>;
++			};
++		};
++	};
++};
+--- /dev/null
++++ b/cmcc_rax3000m-emmc_env
+@@ -0,0 +1,55 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=root=/dev/mmcblk0p65 rootwait
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
++bootconf=config-1#mt7981b-cmcc-rax3000m-emmc
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-cmcc_rax3000m-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-cmcc_rax3000m-squashfs-sysupgrade.itb
++bootled_pwr=red:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )  [eMMC]
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_emmc=run boot_production ; run boot_recovery
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
++mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
++part_default=production
++part_recovery=recovery
++reset_factory=eraseenv && reset
++emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
++emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
++emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
++emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
++emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
++emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
++_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
+--- /dev/null
++++ b/cmcc_rax3000m-nand_env
+@@ -0,0 +1,56 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootconf=config-1#mt7981b-cmcc-rax3000m-nand
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-cmcc_rax3000m-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-cmcc_rax3000m-nand-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-cmcc_rax3000m-nand-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-cmcc_rax3000m-squashfs-sysupgrade.itb
++bootled_pwr=red:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )  [SPI-NAND]
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/438-add-jcg_q30-pro.patch

@@ -0,0 +1,420 @@
+--- /dev/null
++++ b/configs/mt7981_jcg_q30-pro_defconfig
+@@ -0,0 +1,175 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7981=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981_jcg_q30-pro"
++CONFIG_DEFAULT_ENV_FILE="jcg_q30-pro_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981_jcg_q30-pro.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7981_jcg_q30-pro.dts
+@@ -0,0 +1,179 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "JCG Q30 PRO";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		factory {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		status_red {
++			label = "red:status";
++			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
++		};
++
++		status_blue {
++			label = "blue:status";
++			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "disabled";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_1";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	pwm_pins: pwm0-pins-func-1 {
++		mux {
++			function = "pwm";
++			groups = "pwm0_1", "pwm1_0";
++		};
++	};
++};
++
++&pwm {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm_pins>;
++	status = "okay";
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "orig-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7000000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/jcg_q30-pro_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-jcg_q30-pro-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-jcg_q30-pro-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-jcg_q30-pro-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-jcg_q30-pro-squashfs-sysupgrade.itb
++bootled_pwr=blue:status
++bootled_rec=red:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
++ethaddr_factory=mtd read factory 0x40080000 0xa0000 0x800 && env readmem -b ethaddr 0x4008002a 0x6 ; setenv ethaddr_factory
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/439-add-zyxel_ex5601-t0.patch

@@ -0,0 +1,431 @@
+--- /dev/null
++++ b/configs/mt7986_zyxel_ex5601-t0_defconfig
+@@ -0,0 +1,186 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7986=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-zyxel_ex5601-t0"
++CONFIG_DEFAULT_ENV_FILE="zyxel_ex5601-t0_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-zyxel_ex5601-t0.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="EX5601> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++# CONFIG_DM_PCI is not set
++# CONFIG_PCIE_MEDIATEK is not set
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++# CONFIG_I2C is not set
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_USB=y
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-zyxel_ex5601-t0.dts
+@@ -0,0 +1,181 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Author: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
++ * Author: Nicolò Veronese <nicveronese@gmail.com>
++ */
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include "mt7986.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Zyxel EX5601-T0 ubootmod";
++	compatible = "mediatek,mt7986", "mediatek,mt7986-sd-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++		factory {
++			label = "reset";
++			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++
++		wps {
++			label = "wps";
++			gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_WPS_BUTTON>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_green: pwr {
++			label = "green:status";
++			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
++			default-state = "off";
++		};
++
++		led_sfp_green: sfp {
++			label = "green:sfp";
++			gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
++			default-state = "off";
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "disabled";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_2";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <1>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <20000000>;
++		spi-tx-buswidth = <4>;
++		spi-rx-buswidth = <4>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x0100000 0x0080000>;
++			};
++
++			partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x0200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x0200000>;
++			};
++
++			partition@540000 {
++				label = "zloader";
++				reg = <0x540000 0x0040000>;
++				read-only;
++			};
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x1da80000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
++
+--- /dev/null
++++ b/zyxel_ex5601-t0_env
+@@ -0,0 +1,55 @@
++ethaddr_factory=mtd read Factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x4008002A 0x6 ; setenv ethaddr_factory
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=console=ttyS0,115200n8 console_msg_format=syslog
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-squashfs-sysupgrade.itb
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=run ubi_read_production && bootm $loadaddr#$bootconf
++boot_recovery=run ubi_read_recovery && bootm $loadaddr#$bootconf
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_fit=fit
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr $part_fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/440-add-xiaomi_mi-router-ax3000t.patch

@@ -0,0 +1,414 @@
+--- /dev/null
++++ b/configs/mt7981_xiaomi_mi-router-ax3000t_defconfig
+@@ -0,0 +1,163 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7981=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981_xiaomi_mi-router-ax3000t"
++CONFIG_DEFAULT_ENV_FILE="xiaomi_mi-router-ax3000t_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981_xiaomi_mi-router-ax3000t.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++# CONFIG_CMD_EXT4 is not set
++# CONFIG_CMD_FAT is not set
++CONFIG_CMD_FDT=y
++# CONFIG_CMD_FS_GENERIC is not set
++# CONFIG_CMD_FS_UUID is not set
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MTD=y
++# CONFIG_CMD_PCI is not set
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++# CONFIG_CMD_PWM is not set
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++# CONFIG_CMD_USB is not set
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++# CONFIG_DM_USB is not set
++# CONFIG_DM_PWM is not set
++# CONFIG_PWM_MTK is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++# CONFIG_DM_SCSI is not set
++# CONFIG_AHCI is not set
++CONFIG_PHY=y
++# CONFIG_PHY_MTK_TPHY is not set
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++# CONFIG_PCI is not set
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++# CONFIG_DM_PCI is not set
++# CONFIG_PCIE_MEDIATEK is not set
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++# CONFIG_USB is not set
++# CONFIG_USB_HOST is not set
++# CONFIG_USB_XHCI_HCD is not set
++# CONFIG_USB_XHCI_MTK is not set
++# CONFIG_USB_STORAGE is not set
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7981_xiaomi_mi-router-ax3000t.dts
+@@ -0,0 +1,187 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Xiaomi Router AX3000T";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++
++		mesh {
++			label = "mesh";
++			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++			linux,code = <BTN_9>;
++			linux,input-type = <EV_SW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_blue {
++			label = "blue:status";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_yellow {
++			label = "yellow:status";
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_1";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x00 0x100000>;
++			};
++
++			partition@100000 {
++				label = "Nvram";
++				reg = <0x100000 0x40000>;
++			};
++
++			partition@140000 {
++				label = "Bdata";
++				reg = <0x140000 0x40000>;
++			};
++
++			partition@180000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "crash";
++				reg = <0x580000 0x40000>;
++			};
++
++			partition@5c0000 {
++				label = "crash_log";
++				reg = <0x5c0000 0x40000>;
++			};
++
++			partition@600000 {
++				label = "ubi";
++				reg = <0x600000 0x7000000>;
++			};
++
++			partition@7600000 {
++				label = "KF";
++				reg = <0x7600000 0x40000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/xiaomi_mi-router-ax3000t_env
+@@ -0,0 +1,55 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=console=ttyS0,115200n8 console_msg_format=syslog
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb
++bootled_pwr=yellow:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/441-add-jdcloud_re-cp-03.patch

@@ -0,0 +1,324 @@
+--- /dev/null
++++ b/configs/mt7986a_jdcloud_re-cp-03_defconfig
+@@ -0,0 +1,112 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x40000
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-jdcloud_re-cp-03"
++CONFIG_SYS_PROMPT="MT7986> "
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7986=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_ENV_OFFSET_REDUND=0x440000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-jdcloud_re-cp-03.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="jdcloud_re-cp-03_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_MDIO=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_RAM=y
++CONFIG_SCSI=y
++CONFIG_DM_SCSI=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-jdcloud_re-cp-03.dts
+@@ -0,0 +1,148 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include "mt7986.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "JDCloud RE-CP-03";
++	compatible = "mediatek,mt7986", "mediatek,mt7986-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x40000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		button-joylink {
++			label = "joylink";
++			linux,code = <BTN_0>;
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++		};
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "blue:status";
++			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
++			default-state = "off";
++		};
++
++		led-1 {
++			label = "red:status";
++			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
++			default-state = "on";
++		};
++
++		led-2 {
++			label = "green:status";
++			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
++			default-state = "off";
++		};
++	};
++
++	reg_1p8v: regulator-1p8v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-1.8V";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	reg_3p3v: regulator-3p3v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-3.3V";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&mmc0 {
++	bus-width = <8>;
++	cap-mmc-highspeed;
++	cap-mmc-hw-reset;
++	max-frequency = <200000000>;
++	non-removable;
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_default>;
++	vmmc-supply = <&reg_3p3v>;
++	vqmmc-supply = <&reg_1p8v>;
++	status = "okay";
++};
++
++&pinctrl {
++	mmc0_pins_default: mmc0default {
++		mux {
++			function = "flash";
++			groups =  "emmc_51";
++		};
++
++		conf-cmd-dat {
++			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
++			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
++			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
++			input-enable;
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++
++		conf-clk {
++			pins = "EMMC_CK";
++			drive-strength = <MTK_DRIVE_6mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-dsl {
++			pins = "EMMC_DSL";
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-rst {
++			pins = "EMMC_RSTB";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++	};
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/jdcloud_re-cp-03_env
+@@ -0,0 +1,55 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=root=/dev/mmcblk0p65 rootwait
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-jdcloud_re-cp-03-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-jdcloud_re-cp-03-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-jdcloud_re-cp-03-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-jdcloud_re-cp-03-squashfs-sysupgrade.itb
++bootled_pwr=red:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_emmc=run boot_production ; run boot_recovery
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
++mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
++part_default=production
++part_recovery=recovery
++reset_factory=eraseenv && reset
++emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
++emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
++emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
++emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
++emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
++emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
++_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-sunxi/patches/260-add-missing-type-u64.patch

@@ -1,10 +0,0 @@
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -1,6 +1,7 @@
- #ifndef _LINUX_TYPES_H
- #define _LINUX_TYPES_H
- 
-+typedef unsigned long long __u64;
- #include <linux/posix_types.h>
- #include <asm/types.h>
- #include <stdbool.h>

package/firmware/ath11k-firmware/Makefile

@@ -50,7 +50,7 @@ QCN9074_BOARD_REV:=8e140c65f36137714b6d8934e09dcd73cb05c2f6
 QCN9074_BOARD_FILE:=board-2.bin.$(QCN9074_BOARD_REV)
 
 define Download/qcn9074-board
-  URL:=https://github.com/kvalo/ath11k-firmware/raw/master/QCN9074/hw1.0/
+  URL:=https://git.codelinaro.org/clo/ath-firmware/ath11k-firmware/-/raw/main/QCN9074/hw1.0/
   URL_FILE:=board-2.bin
   FILE:=$(QCN9074_BOARD_FILE)
   HASH:=dbf0ca14aa1229eccd48f26f1026901b9718b143bd30b51b8ea67c84ba6207f1

package/firmware/intel-microcode/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=intel-microcode
-PKG_VERSION:=20230808
+PKG_VERSION:=20240531
 PKG_RELEASE:=1
 
 PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).1.tar.xz
 PKG_SOURCE_URL:=@DEBIAN/pool/non-free-firmware/i/intel-microcode/
-PKG_HASH:=29e77c275b3f60a691832c0844f70effbd94a4594d04af21e0c2e6e0c1ac1894
+PKG_HASH:=808cbb57a790dab7060b59b31e70e54ac47d3798d75e9784ed57a65b9f951fc4
 PKG_BUILD_DIR:=$(BUILD_DIR)/intel-microcode-3.$(PKG_VERSION).1
 PKG_CPE_ID:=cpe:/a:intel:microcode
 

package/firmware/ipq-wifi/Makefile

@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/version.mk
 
 PKG_NAME:=ipq-wifi
-PKG_RELEASE:=2
+PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
-PKG_SOURCE_DATE:=2023-06-03
-PKG_SOURCE_VERSION:=cd9c30ca47b8e5388b770c523a7f6b8b969e2f92
-PKG_MIRROR_HASH:=45e623fcc512b514ade0f22e217275536aa8de4afba7dfdb11696482b8fa71a2
+PKG_SOURCE_DATE:=2023-11-10
+PKG_SOURCE_VERSION:=0c2e810e71ed0a59fb00246c7fa2c236ff67a0ee
+PKG_MIRROR_HASH:=fc6016540bd2c67484952d0e4432d740f0e022d9b688e851bb6321def8d36844
 
 PKG_FLAGS:=nonshared
 

package/firmware/linux-firmware/Makefile

@@ -30,6 +30,8 @@ define Package/firmware-default
   URL:=http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git
   TITLE:=$(1)
   DEPENDS:=$(2)
+  LICENSE_FILES:=$(3)
+  LICENSE:=$(4)
 endef
 
 define Build/Compile

package/firmware/linux-firmware/amd.mk

@@ -1,4 +1,4 @@
-Package/amd64-microcode = $(call Package/firmware-default,AMD64 CPU microcode,@TARGET_x86)
+Package/amd64-microcode = $(call Package/firmware-default,AMD64 CPU microcode,@TARGET_x86,LICENSE.amd-ucode)
 define Package/amd64-microcode/install
 	$(INSTALL_DIR) $(1)/lib/firmware/amd-ucode
 	$(CP) \
@@ -8,7 +8,7 @@ endef
 
 $(eval $(call BuildPackage,amd64-microcode))
 
-Package/amdgpu-firmware = $(call Package/firmware-default,AMDGPU Video Driver firmware)
+Package/amdgpu-firmware = $(call Package/firmware-default,AMDGPU Video Driver firmware,,LICENSE.amdgpura)
 define Package/amdgpu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/amdgpu
 	$(CP) \
@@ -18,7 +18,7 @@ endef
 
 $(eval $(call BuildPackage,amdgpu-firmware))
 
-Package/radeon-firmware = $(call Package/firmware-default,Radeon Video Driver firmware)
+Package/radeon-firmware = $(call Package/firmware-default,Radeon Video Driver firmware,,LICENSE.radeon)
 define Package/radeon-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/radeon
 	$(CP) \

package/firmware/linux-firmware/broadcom.mk

@@ -1,4 +1,4 @@
-Package/brcmfmac-firmware-4339-sdio = $(call Package/firmware-default,Broadcom 4339 FullMAC SDIO firmware)
+Package/brcmfmac-firmware-4339-sdio = $(call Package/firmware-default,Broadcom 4339 FullMAC SDIO firmware,,LICENCE.cypressb)
 define Package/brcmfmac-firmware-4339-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/cypress
 	$(INSTALL_DATA) \
@@ -11,7 +11,7 @@ define Package/brcmfmac-firmware-4339-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4339-sdio))
 
-Package/brcmfmac-firmware-43602a1-pcie = $(call Package/firmware-default,Broadcom 43602a1 FullMAC PCIe firmware)
+Package/brcmfmac-firmware-43602a1-pcie = $(call Package/firmware-default,Broadcom 43602a1 FullMAC PCIe firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-firmware-43602a1-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -20,7 +20,7 @@ define Package/brcmfmac-firmware-43602a1-pcie/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-43602a1-pcie))
 
-Package/brcmfmac-firmware-4366b1-pcie = $(call Package/firmware-default,Broadcom 4366b1 FullMAC PCIe firmware)
+Package/brcmfmac-firmware-4366b1-pcie = $(call Package/firmware-default,Broadcom 4366b1 FullMAC PCIe firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-firmware-4366b1-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -29,7 +29,7 @@ define Package/brcmfmac-firmware-4366b1-pcie/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4366b1-pcie))
 
-Package/brcmfmac-firmware-4366c0-pcie = $(call Package/firmware-default,Broadcom 4366c0 FullMAC PCIe firmware)
+Package/brcmfmac-firmware-4366c0-pcie = $(call Package/firmware-default,Broadcom 4366c0 FullMAC PCIe firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-firmware-4366c0-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -38,7 +38,7 @@ define Package/brcmfmac-firmware-4366c0-pcie/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4366c0-pcie))
 
-Package/brcmfmac-firmware-4329-sdio = $(call Package/firmware-default,Broadcom BCM4329 FullMac SDIO firmware)
+Package/brcmfmac-firmware-4329-sdio = $(call Package/firmware-default,Broadcom BCM4329 FullMac SDIO firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-firmware-4329-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -47,7 +47,7 @@ define Package/brcmfmac-firmware-4329-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4329-sdio))
 
-Package/brcmfmac-nvram-43430-sdio = $(call Package/firmware-default,Broadcom BCM43430 SDIO NVRAM)
+Package/brcmfmac-nvram-43430-sdio = $(call Package/firmware-default,Broadcom BCM43430 SDIO NVRAM,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-nvram-43430-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -95,7 +95,7 @@ define Package/brcmfmac-nvram-43430-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-nvram-43430-sdio))
 
-Package/brcmfmac-firmware-43430a0-sdio = $(call Package/firmware-default,Broadcom BCM43430a0 FullMac SDIO firmware)
+Package/brcmfmac-firmware-43430a0-sdio = $(call Package/firmware-default,Broadcom BCM43430a0 FullMac SDIO firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-firmware-43430a0-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -104,7 +104,7 @@ define Package/brcmfmac-firmware-43430a0-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-43430a0-sdio))
 
-Package/brcmfmac-nvram-43455-sdio = $(call Package/firmware-default,Broadcom BCM43455 SDIO NVRAM)
+Package/brcmfmac-nvram-43455-sdio = $(call Package/firmware-default,Broadcom BCM43455 SDIO NVRAM,,LICENCE.broadcom_bcm43xx)
 define Package/brcmfmac-nvram-43455-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
@@ -161,7 +161,7 @@ define Package/brcmfmac-firmware-usb/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-usb))
 
-Package/brcmsmac-firmware = $(call Package/firmware-default,Broadcom BCM43xx softmac PCIe firmware)
+Package/brcmsmac-firmware = $(call Package/firmware-default,Broadcom BCM43xx softmac PCIe firmware,,LICENCE.broadcom_bcm43xx)
 define Package/brcmsmac-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \

package/firmware/linux-firmware/intel.mk

@@ -177,6 +177,13 @@ define Package/iwlwifi-firmware-ax200/install
 endef
 $(eval $(call BuildPackage,iwlwifi-firmware-ax200))
 
+Package/iwlwifi-firmware-ax201 = $(call Package/firmware-default,Intel AX201 firmware)
+define Package/iwlwifi-firmware-ax201/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-QuZ-a0-hr-b0-72.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-ax201))
+
 Package/iwlwifi-firmware-ax210 = $(call Package/firmware-default,Intel AX210 firmware)
 define Package/iwlwifi-firmware-ax210/install
 	$(INSTALL_DIR) $(1)/lib/firmware

package/firmware/linux-firmware/marvell.mk

@@ -1,4 +1,4 @@
-Package/mwl8k-firmware = $(call Package/firmware-default,Marvell 8366/8687 firmware)
+Package/mwl8k-firmware = $(call Package/firmware-default,Marvell 8366/8687 firmware,,LICENCE.Marvell)
 define Package/mwl8k-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mwl8k
 	$(INSTALL_DATA) \
@@ -11,7 +11,7 @@ define Package/mwl8k-firmware/install
 endef
 $(eval $(call BuildPackage,mwl8k-firmware))
 
-Package/mwifiex-pcie-firmware = $(call Package/firmware-default,Marvell 8897 firmware)
+Package/mwifiex-pcie-firmware = $(call Package/firmware-default,Marvell 8897 firmware,,LICENCE.Marvell)
 define Package/mwifiex-pcie-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mrvl
 	$(INSTALL_DATA) \
@@ -20,7 +20,7 @@ define Package/mwifiex-pcie-firmware/install
 endef
 $(eval $(call BuildPackage,mwifiex-pcie-firmware))
 
-Package/mwifiex-sdio-firmware = $(call Package/firmware-default,Marvell 8887/8997 firmware)
+Package/mwifiex-sdio-firmware = $(call Package/firmware-default,Marvell 8887/8997 firmware,,LICENCE.Marvell)
 define Package/mwifiex-sdio-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mrvl
 	$(INSTALL_DATA) \
@@ -31,7 +31,7 @@ define Package/mwifiex-sdio-firmware/install
 endef
 $(eval $(call BuildPackage,mwifiex-sdio-firmware))
 
-Package/libertas-usb-firmware = $(call Package/firmware-default,Marvell 8388/8682 USB firmware)
+Package/libertas-usb-firmware = $(call Package/firmware-default,Marvell 8388/8682 USB firmware,,LICENCE.Marvell)
 define Package/libertas-usb-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/libertas
 	$(INSTALL_DATA) \
@@ -41,7 +41,7 @@ define Package/libertas-usb-firmware/install
 endef
 $(eval $(call BuildPackage,libertas-usb-firmware))
 
-Package/libertas-sdio-firmware = $(call Package/firmware-default,Marvell 8385/8686/8688 SDIO firmware)
+Package/libertas-sdio-firmware = $(call Package/firmware-default,Marvell 8385/8686/8688 SDIO firmware,,LICENCE.Marvell)
 define Package/libertas-sdio-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/libertas
 	$(INSTALL_DATA) \
@@ -60,7 +60,7 @@ define Package/libertas-sdio-firmware/install
 endef
 $(eval $(call BuildPackage,libertas-sdio-firmware))
 
-Package/libertas-spi-firmware = $(call Package/firmware-default,Marvell 8686 SPI firmware)
+Package/libertas-spi-firmware = $(call Package/firmware-default,Marvell 8686 SPI firmware,,LICENCE.Marvell)
 define Package/libertas-spi-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/libertas
 	$(INSTALL_DATA) \

package/firmware/linux-firmware/mediatek.mk

@@ -1,4 +1,4 @@
-Package/mt7601u-firmware = $(call Package/firmware-default,MediaTek MT7601U firmware)
+Package/mt7601u-firmware = $(call Package/firmware-default,MediaTek MT7601U firmware,,LICENCE.mediatek)
 define Package/mt7601u-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \
@@ -42,7 +42,7 @@ define Package/rt73-usb-firmware/install
 endef
 $(eval $(call BuildPackage,rt73-usb-firmware))
 
-Package/mt7622bt-firmware = $(call Package/firmware-default,mt7622bt firmware)
+Package/mt7622bt-firmware = $(call Package/firmware-default,mt7622bt firmware,,LICENCE.mediatek)
 define Package/mt7622bt-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \
@@ -51,7 +51,7 @@ define Package/mt7622bt-firmware/install
 endef
 $(eval $(call BuildPackage,mt7622bt-firmware))
 
-Package/mt7921bt-firmware = $(call Package/firmware-default,mt7921bt firmware)
+Package/mt7921bt-firmware = $(call Package/firmware-default,mt7921bt firmware,,LICENCE.mediatek)
 define Package/mt7921bt-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \
@@ -60,7 +60,7 @@ define Package/mt7921bt-firmware/install
 endef
 $(eval $(call BuildPackage,mt7921bt-firmware))
 
-Package/mt7922bt-firmware = $(call Package/firmware-default,mt7922bt firmware)
+Package/mt7922bt-firmware = $(call Package/firmware-default,mt7922bt firmware,,LICENCE.mediatek)
 define Package/mt7922bt-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \
@@ -69,7 +69,7 @@ define Package/mt7922bt-firmware/install
 endef
 $(eval $(call BuildPackage,mt7922bt-firmware))
 
-Package/mt7981-wo-firmware = $(call Package/firmware-default,MT7981 offload firmware)
+Package/mt7981-wo-firmware = $(call Package/firmware-default,MT7981 offload firmware,,LICENCE.mediatek)
 define Package/mt7981-wo-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \
@@ -78,7 +78,7 @@ define Package/mt7981-wo-firmware/install
 endef
 $(eval $(call BuildPackage,mt7981-wo-firmware))
 
-Package/mt7986-wo-firmware = $(call Package/firmware-default,MT7986 offload firmware)
+Package/mt7986-wo-firmware = $(call Package/firmware-default,MT7986 offload firmware,,LICENCE.mediatek)
 define Package/mt7986-wo-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
 	$(INSTALL_DATA) \

package/firmware/linux-firmware/qca.mk

@@ -1,4 +1,4 @@
-Package/ar3k-firmware = $(call Package/firmware-default,ath3k firmware)
+Package/ar3k-firmware = $(call Package/firmware-default,ath3k firmware,,LICENSE.QualcommAtheros_ar3k)
 define Package/ar3k-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ar3k
 	$(CP) \
@@ -21,7 +21,7 @@ define Package/ath6k-firmware/install
 endef
 $(eval $(call BuildPackage,ath6k-firmware))
 
-Package/ath9k-htc-firmware = $(call Package/firmware-default,AR9271/AR7010 firmware)
+Package/ath9k-htc-firmware = $(call Package/firmware-default,AR9271/AR7010 firmware,,LICENCE.open-ath9k-htc-firmware)
 define Package/ath9k-htc-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath9k_htc
 	$(INSTALL_DATA) \
@@ -31,7 +31,7 @@ define Package/ath9k-htc-firmware/install
 endef
 $(eval $(call BuildPackage,ath9k-htc-firmware))
 
-Package/carl9170-firmware = $(call Package/firmware-default,AR9170 firmware)
+Package/carl9170-firmware = $(call Package/firmware-default,AR9170 firmware,,carl9170fw/GPL)
 define Package/carl9170-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/carl9170-1.fw $(1)/lib/firmware

package/firmware/linux-firmware/qca_ath10k.mk

@@ -1,4 +1,4 @@
-Package/ath10k-board-qca4019 = $(call Package/firmware-default,ath10k qca4019 board firmware)
+Package/ath10k-board-qca4019 = $(call Package/firmware-default,ath10k qca4019 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca4019/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
 	$(INSTALL_DATA) \
@@ -6,7 +6,7 @@ define Package/ath10k-board-qca4019/install
 		$(1)/lib/firmware/ath10k/QCA4019/hw1.0/
 endef
 $(eval $(call BuildPackage,ath10k-board-qca4019))
-Package/ath10k-firmware-qca4019 = $(call Package/firmware-default,ath10k qca4019 firmware)
+Package/ath10k-firmware-qca4019 = $(call Package/firmware-default,ath10k qca4019 firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca4019/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA4019/hw1.0
 	$(INSTALL_DATA) \
@@ -15,7 +15,7 @@ define Package/ath10k-firmware-qca4019/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca4019))
 
-Package/ath10k-board-qca9377 = $(call Package/firmware-default,ath10k qca9377 board firmware)
+Package/ath10k-board-qca9377 = $(call Package/firmware-default,ath10k qca9377 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca9377/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9377/hw1.0
 	$(INSTALL_DATA) \
@@ -23,7 +23,7 @@ define Package/ath10k-board-qca9377/install
 		$(1)/lib/firmware/ath10k/QCA9377/hw1.0/
 endef
 $(eval $(call BuildPackage,ath10k-board-qca9377))
-Package/ath10k-firmware-qca9377 = $(call Package/firmware-default,ath10k qca9377 firmware,+ath10k-board-qca9377)
+Package/ath10k-firmware-qca9377 = $(call Package/firmware-default,ath10k qca9377 firmware,+ath10k-board-qca9377,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca9377/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9377/hw1.0
 	$(INSTALL_DATA) \
@@ -32,7 +32,7 @@ define Package/ath10k-firmware-qca9377/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca9377))
 
-Package/ath10k-board-qca9887 = $(call Package/firmware-default,ath10k qca9887 board firmware)
+Package/ath10k-board-qca9887 = $(call Package/firmware-default,ath10k qca9887 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca9887/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
 	$(INSTALL_DATA) \
@@ -40,7 +40,7 @@ define Package/ath10k-board-qca9887/install
 		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
 endef
 $(eval $(call BuildPackage,ath10k-board-qca9887))
-Package/ath10k-firmware-qca9887 = $(call Package/firmware-default,ath10k qca9887 firmware,+ath10k-board-qca9887)
+Package/ath10k-firmware-qca9887 = $(call Package/firmware-default,ath10k qca9887 firmware,+ath10k-board-qca9887,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca9887/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
 	$(INSTALL_DATA) \
@@ -49,7 +49,7 @@ define Package/ath10k-firmware-qca9887/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca9887))
 
-Package/ath10k-board-qca9888 = $(call Package/firmware-default,ath10k qca9888 board firmware)
+Package/ath10k-board-qca9888 = $(call Package/firmware-default,ath10k qca9888 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca9888/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
 	$(INSTALL_DATA) \
@@ -57,7 +57,7 @@ define Package/ath10k-board-qca9888/install
 		$(1)/lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
 endef
 $(eval $(call BuildPackage,ath10k-board-qca9888))
-Package/ath10k-firmware-qca9888 = $(call Package/firmware-default,ath10k qca9888 firmware,+ath10k-board-qca9888)
+Package/ath10k-firmware-qca9888 = $(call Package/firmware-default,ath10k qca9888 firmware,+ath10k-board-qca9888,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca9888/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9888/hw2.0
 	$(INSTALL_DATA) \
@@ -66,7 +66,7 @@ define Package/ath10k-firmware-qca9888/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca9888))
 
-Package/ath10k-board-qca988x = $(call Package/firmware-default,ath10k qca988x board firmware)
+Package/ath10k-board-qca988x = $(call Package/firmware-default,ath10k qca988x board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca988x/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
 	$(INSTALL_DATA) \
@@ -74,7 +74,7 @@ define Package/ath10k-board-qca988x/install
 		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/
 endef
 $(eval $(call BuildPackage,ath10k-board-qca988x))
-Package/ath10k-firmware-qca988x = $(call Package/firmware-default,ath10k qca988x firmware,+ath10k-board-qca988x)
+Package/ath10k-firmware-qca988x = $(call Package/firmware-default,ath10k qca988x firmware,+ath10k-board-qca988x,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca988x/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
 	$(INSTALL_DATA) \
@@ -83,7 +83,7 @@ define Package/ath10k-firmware-qca988x/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca988x))
 
-Package/ath10k-firmware-qca6174 = $(call Package/firmware-default,ath10k qca6174 firmware)
+Package/ath10k-firmware-qca6174 = $(call Package/firmware-default,ath10k qca6174 firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca6174/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA6174/hw2.1
 	$(INSTALL_DATA) \
@@ -102,7 +102,7 @@ define Package/ath10k-firmware-qca6174/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca6174))
 
-Package/ath10k-board-qca99x0 = $(call Package/firmware-default,ath10k qca99x0 board firmware)
+Package/ath10k-board-qca99x0 = $(call Package/firmware-default,ath10k qca99x0 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca99x0/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
 	$(INSTALL_DATA) \
@@ -111,7 +111,7 @@ define Package/ath10k-board-qca99x0/install
 endef
 $(eval $(call BuildPackage,ath10k-board-qca99x0))
 
-Package/ath10k-firmware-qca99x0 = $(call Package/firmware-default,ath10k qca99x0 firmware,+ath10k-board-qca99x0)
+Package/ath10k-firmware-qca99x0 = $(call Package/firmware-default,ath10k qca99x0 firmware,+ath10k-board-qca99x0,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca99x0/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA99X0/hw2.0
 	$(INSTALL_DATA) \
@@ -120,7 +120,7 @@ define Package/ath10k-firmware-qca99x0/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca99x0))
 
-Package/ath10k-board-qca9984 = $(call Package/firmware-default,ath10k qca9984 board firmware)
+Package/ath10k-board-qca9984 = $(call Package/firmware-default,ath10k qca9984 board firmware,,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-board-qca9984/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
 	$(INSTALL_DATA) \
@@ -128,7 +128,7 @@ define Package/ath10k-board-qca9984/install
 		$(1)/lib/firmware/ath10k/QCA9984/hw1.0/board-2.bin
 endef
 $(eval $(call BuildPackage,ath10k-board-qca9984))
-Package/ath10k-firmware-qca9984 = $(call Package/firmware-default,ath10k qca9984 firmware,+ath10k-board-qca9984)
+Package/ath10k-firmware-qca9984 = $(call Package/firmware-default,ath10k qca9984 firmware,+ath10k-board-qca9984,LICENSE.QualcommAtheros_ath10k)
 define Package/ath10k-firmware-qca9984/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9984/hw1.0
 	$(INSTALL_DATA) \

package/firmware/linux-firmware/qca_ath11k.mk

@@ -1,4 +1,4 @@
-Package/ath11k-firmware-qca6390 = $(call Package/firmware-default,QCA6390 ath11k firmware)
+Package/ath11k-firmware-qca6390 = $(call Package/firmware-default,QCA6390 ath11k firmware,,LICENCE.atheros_firmware)
 define Package/ath11k-firmware-qca6390/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/QCA6390/hw2.0
 	$(INSTALL_DATA) \
@@ -6,7 +6,7 @@ define Package/ath11k-firmware-qca6390/install
 endef
 $(eval $(call BuildPackage,ath11k-firmware-qca6390))
 
-Package/ath11k-firmware-wcn6750 = $(call Package/firmware-default,WCN6750 ath11k firmware)
+Package/ath11k-firmware-wcn6750 = $(call Package/firmware-default,WCN6750 ath11k firmware,,LICENCE.atheros_firmware)
 define Package/ath11k-firmware-wcn6750/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/WCN6750/hw1.0
 	$(INSTALL_DATA) \
@@ -14,7 +14,7 @@ define Package/ath11k-firmware-wcn6750/install
 endef
 $(eval $(call BuildPackage,ath11k-firmware-wcn6750))
 
-Package/ath11k-firmware-wcn6855 = $(call Package/firmware-default,WCN6855 ath11k firmware)
+Package/ath11k-firmware-wcn6855 = $(call Package/firmware-default,WCN6855 ath11k firmware,,LICENCE.atheros_firmware)
 define Package/ath11k-firmware-wcn6855/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath11k/WCN6855/hw2.0
 	$(INSTALL_DATA) \

package/firmware/linux-firmware/realtek.mk

@@ -20,7 +20,7 @@ define Package/r8169-firmware/install
 endef
 $(eval $(call BuildPackage,r8169-firmware))
 
-Package/rtl8188eu-firmware = $(call Package/firmware-default,RealTek RTL8188EU firmware)
+Package/rtl8188eu-firmware = $(call Package/firmware-default,RealTek RTL8188EU firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8188eu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(CP) \
@@ -38,7 +38,7 @@ define Package/rtl8192ce-firmware/install
 endef
 $(eval $(call BuildPackage,rtl8192ce-firmware))
 
-Package/rtl8192cu-firmware = $(call Package/firmware-default,RealTek RTL8192CU firmware)
+Package/rtl8192cu-firmware = $(call Package/firmware-default,RealTek RTL8192CU firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8192cu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8192cufw.bin $(1)/lib/firmware/rtlwifi
@@ -48,28 +48,28 @@ define Package/rtl8192cu-firmware/install
 endef
 $(eval $(call BuildPackage,rtl8192cu-firmware))
 
-Package/rtl8192de-firmware = $(call Package/firmware-default,RealTek RTL8192DE firmware)
+Package/rtl8192de-firmware = $(call Package/firmware-default,RealTek RTL8192DE firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8192de-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8192defw.bin $(1)/lib/firmware/rtlwifi
 endef
 $(eval $(call BuildPackage,rtl8192de-firmware))
 
-Package/rtl8192eu-firmware = $(call Package/firmware-default,RealTek RTL8192EU firmware)
+Package/rtl8192eu-firmware = $(call Package/firmware-default,RealTek RTL8192EU firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8192eu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8192eu_nic.bin $(1)/lib/firmware/rtlwifi
 endef
 $(eval $(call BuildPackage,rtl8192eu-firmware))
 
-Package/rtl8192se-firmware = $(call Package/firmware-default,RealTek RTL8192SE firmware)
+Package/rtl8192se-firmware = $(call Package/firmware-default,RealTek RTL8192SE firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8192se-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8192sefw.bin $(1)/lib/firmware/rtlwifi
 endef
 $(eval $(call BuildPackage,rtl8192se-firmware))
 
-Package/rtl8723au-firmware = $(call Package/firmware-default,RealTek RTL8723AU firmware)
+Package/rtl8723au-firmware = $(call Package/firmware-default,RealTek RTL8723AU firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8723au-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8723aufw_A.bin $(1)/lib/firmware/rtlwifi
@@ -78,7 +78,7 @@ define Package/rtl8723au-firmware/install
 endef
 $(eval $(call BuildPackage,rtl8723au-firmware))
 
-Package/rtl8723bu-firmware = $(call Package/firmware-default,RealTek RTL8723BU firmware)
+Package/rtl8723bu-firmware = $(call Package/firmware-default,RealTek RTL8723BU firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8723bu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8723bu_nic.bin $(1)/lib/firmware/rtlwifi
@@ -109,10 +109,10 @@ define Package/rtl8761bu-firmware/install
 endef
 $(eval $(call BuildPackage,rtl8761bu-firmware))
 
-Package/rtl8821ae-firmware = $(call Package/firmware-default,RealTek RTL8821AE firmware)
+Package/rtl8821ae-firmware = $(call Package/firmware-default,RealTek RTL8821AE firmware,,LICENCE.rtlwifi_firmware.txt)
 define Package/rtl8821ae-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8821aefw.bin $(1)/lib/firmware/rtlwifi
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8821aefw_29.bin $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8821aefw_wowlan.bin $(1)/lib/firmware/rtlwifi
 endef
 $(eval $(call BuildPackage,rtl8821ae-firmware))

package/firmware/linux-firmware/ti.mk

@@ -1,4 +1,4 @@
-Package/wl12xx-firmware = $(call Package/firmware-default,TI WL12xx firmware)
+Package/wl12xx-firmware = $(call Package/firmware-default,TI WL12xx firmware,,LICENCE.ti-connectivity)
 define Package/wl12xx-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
 	$(INSTALL_DATA) \
@@ -15,7 +15,7 @@ define Package/wl12xx-firmware/install
 endef
 $(eval $(call BuildPackage,wl12xx-firmware))
 
-Package/wl18xx-firmware = $(call Package/firmware-default,TI WL18xx firmware)
+Package/wl18xx-firmware = $(call Package/firmware-default,TI WL18xx firmware,,LICENCE.ti-connectivity)
 define Package/wl18xx-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
 	$(INSTALL_DATA) \

package/firmware/wireless-regdb/Makefile

@@ -1,12 +1,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wireless-regdb
-PKG_VERSION:=2023.09.01
+PKG_VERSION:=2024.10.07
 PKG_RELEASE:=1
+PKG_LICENSE:=ISC
+PKG_LICENSE_FILES:=LICENSE
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
-PKG_HASH:=26d4c2a727cc59239b84735aad856b7c7d0b04e30aa5c235c4f7f47f5f053491
+PKG_HASH:=f76f2bd79a653e9f9dd50548d99d03a4a4eb157da056dfd5892f403ec28fb3d5
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
@@ -16,7 +18,7 @@ define Package/wireless-regdb
   PKGARCH:=all
   SECTION:=firmware
   CATEGORY:=Firmware
-  URL:=https://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git/
+  URL:=https://git.kernel.org/pub/scm/linux/kernel/git/wens/wireless-regdb.git/
   TITLE:=Wireless Regulatory Database
 endef
 

package/kernel/bcm27xx-gpu-fw/Makefile

@@ -2,8 +2,8 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=bcm27xx-gpu-fw
-PKG_VERSION:=2022-05-16
-PKG_RELEASE:=3673be308132de102fdff491d1333d9d0f823557
+PKG_VERSION:=2024-01-11
+PKG_RELEASE:=0968de28716a9b1f106b8492646d0ed0a2800152
 
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)/rpi-firmware-$(PKG_RELEASE)
 
@@ -26,7 +26,7 @@ define Download/bootcode_bin
   FILE:=$(RPI_FIRMWARE_FILE)-bootcode.bin
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=bootcode.bin
-  HASH:=69309823da13dc96b89e3d82b44f820e4f84efa79d207adad2c8784559794f03
+  HASH:=af603ebd97e7b692c30195563f7b25656eb05d57838cf1a715ebb470d1614ce4
 endef
 $(eval $(call Download,bootcode_bin))
 
@@ -34,7 +34,7 @@ define Download/fixup_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup.dat
-  HASH:=921f56c62ad1995addb984b156c869202dc5d46bbe9ebcbd02c20f0def9058e3
+  HASH:=c28ea955e672e374016dca61d63afa026490f0473a98115908586ab48e324aeb
 endef
 $(eval $(call Download,fixup_dat))
 
@@ -42,7 +42,7 @@ define Download/fixup_cd_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup_cd.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup_cd.dat
-  HASH:=83a985aa0d73844786f3b3bf674826c520212f6f72fc6a890f2ebb5f87de5d8c
+  HASH:=3cf1aef5f596ca106203ed5dac9ad45e85929ec55ce44c813588645e174442ec
 endef
 $(eval $(call Download,fixup_cd_dat))
 
@@ -50,7 +50,7 @@ define Download/fixup_x_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup_x.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup_x.dat
-  HASH:=8b00b00678adafe01e087240d156dbc87822e745b269be4f282596b69265cd1e
+  HASH:=56525c8feabde1ab86f36bb09bc55171659b2993f94132cf81ffc4293d62269d
 endef
 $(eval $(call Download,fixup_x_dat))
 
@@ -58,7 +58,7 @@ define Download/fixup4_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4.dat
-  HASH:=ef2b5d2a0a95ca48e00a1ce78b7650ee9e947cc1c588704c8ae30c1623122e2f
+  HASH:=615f8595801bf52373039f73ad5ad9513f83400d355eb1b2c075c7ae907e927c
 endef
 $(eval $(call Download,fixup4_dat))
 
@@ -66,7 +66,7 @@ define Download/fixup4cd_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4cd.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4cd.dat
-  HASH:=83a985aa0d73844786f3b3bf674826c520212f6f72fc6a890f2ebb5f87de5d8c
+  HASH:=3cf1aef5f596ca106203ed5dac9ad45e85929ec55ce44c813588645e174442ec
 endef
 $(eval $(call Download,fixup4cd_dat))
 
@@ -74,7 +74,7 @@ define Download/fixup4x_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4x.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4x.dat
-  HASH:=a6c4e30ada5a00fe7de83c460638ca824647651bb4a3644b8c65d7ba1d9f2d2b
+  HASH:=6d27a4b8ecb78cef9e1f03751b4aaec5ce8749d36988f381145a8a41dbf164ae
 endef
 $(eval $(call Download,fixup4x_dat))
 
@@ -82,7 +82,7 @@ define Download/start_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start.elf
-  HASH:=5455c148f4b8b04c553809bd22b995ee49ba5279ca3848df8bde6f80a388f7e0
+  HASH:=e8348e88522e7a1d0e2b0944ab66d7d8f4f30da98f326e2b3c123522e45f71b2
 endef
 $(eval $(call Download,start_elf))
 
@@ -90,7 +90,7 @@ define Download/start_cd_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start_cd.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start_cd.elf
-  HASH:=168c0a9178d5a3b4bd89ef770826a85b4ea3132560ba3600c212c0cec4c575c6
+  HASH:=c9b4de3f12bec7808868b898c49f656b5378ddc315f12ccab83d6519bad51680
 endef
 $(eval $(call Download,start_cd_elf))
 
@@ -98,7 +98,7 @@ define Download/start_x_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start_x.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start_x.elf
-  HASH:=30c6a7f32a25185053ca3ca9e4bcfe932246ed42a1b7c37f8803209f93d86404
+  HASH:=0b5c06c109984361eeed0ab14d146f686d8aa8da2025689b887e9cb098636db9
 endef
 $(eval $(call Download,start_x_elf))
 
@@ -106,7 +106,7 @@ define Download/start4_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4.elf
-  HASH:=be8bbff41dba2749b7b0e812f0a9d87a9122d18508f7b5ff3cd20f303d15bc07
+  HASH:=fedc4ecd72c9d21018e210240dcd2e41a8bb5f936fb5674c3351f2a447a22203
 endef
 $(eval $(call Download,start4_elf))
 
@@ -114,7 +114,7 @@ define Download/start4cd_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4cd.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4cd.elf
-  HASH:=000372e9cf6815ade595948dbd6328665f2a535eeee44e74b0ec8e56b6fbbf90
+  HASH:=ea22282a77666801378137a651e7e0b17cc186f63cdbdc8b9bb98749cd12b256
 endef
 $(eval $(call Download,start4cd_elf))
 
@@ -122,7 +122,7 @@ define Download/start4x_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4x.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4x.elf
-  HASH:=48895858f7936570dfab44c67bdcb0357ac8fcd630162c36ac9ed8f2de85c038
+  HASH:=c509e73a9cba7af3223dea885f58294bd04845e822aa3d6278500fa4dcdb112f
 endef
 $(eval $(call Download,start4x_elf))
 

package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_adsl.c

@@ -126,7 +126,7 @@ static int ptm_stop(struct net_device *);
   static unsigned int ptm_poll(int, unsigned int);
   static int ptm_napi_poll(struct napi_struct *, int);
 static int ptm_hard_start_xmit(struct sk_buff *, struct net_device *);
-static int ptm_ioctl(struct net_device *, struct ifreq *, int);
+static int ptm_ioctl(struct net_device *, struct ifreq *, void __user *, int);
 #if LINUX_VERSION_CODE < KERNEL_VERSION(5,6,0)
 static void ptm_tx_timeout(struct net_device *);
 #else
@@ -247,7 +247,7 @@ static struct net_device_ops g_ptm_netdev_ops = {
     .ndo_start_xmit      = ptm_hard_start_xmit,
     .ndo_validate_addr   = eth_validate_addr,
     .ndo_set_mac_address = eth_mac_addr,
-    .ndo_do_ioctl        = ptm_ioctl,
+    .ndo_siocdevprivate  = ptm_ioctl,
     .ndo_tx_timeout      = ptm_tx_timeout,
 };
 
@@ -452,7 +452,7 @@ PTM_HARD_START_XMIT_FAIL:
     return NETDEV_TX_OK;
 }
 
-static int ptm_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+static int ptm_ioctl(struct net_device *dev, struct ifreq *ifr, void __user *data, int cmd)
 {
     int ndev;
 
@@ -462,45 +462,45 @@ static int ptm_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
     switch ( cmd )
     {
     case IFX_PTM_MIB_CW_GET:
-        ((PTM_CW_IF_ENTRY_T *)ifr->ifr_data)->ifRxNoIdleCodewords   = WAN_MIB_TABLE[ndev].wrx_nonidle_cw;
-        ((PTM_CW_IF_ENTRY_T *)ifr->ifr_data)->ifRxIdleCodewords     = WAN_MIB_TABLE[ndev].wrx_idle_cw;
-        ((PTM_CW_IF_ENTRY_T *)ifr->ifr_data)->ifRxCodingViolation   = WAN_MIB_TABLE[ndev].wrx_err_cw;
-        ((PTM_CW_IF_ENTRY_T *)ifr->ifr_data)->ifTxNoIdleCodewords   = 0;
-        ((PTM_CW_IF_ENTRY_T *)ifr->ifr_data)->ifTxIdleCodewords     = 0;
+        ((PTM_CW_IF_ENTRY_T *)data)->ifRxNoIdleCodewords   = WAN_MIB_TABLE[ndev].wrx_nonidle_cw;
+        ((PTM_CW_IF_ENTRY_T *)data)->ifRxIdleCodewords     = WAN_MIB_TABLE[ndev].wrx_idle_cw;
+        ((PTM_CW_IF_ENTRY_T *)data)->ifRxCodingViolation   = WAN_MIB_TABLE[ndev].wrx_err_cw;
+        ((PTM_CW_IF_ENTRY_T *)data)->ifTxNoIdleCodewords   = 0;
+        ((PTM_CW_IF_ENTRY_T *)data)->ifTxIdleCodewords     = 0;
         break;
     case IFX_PTM_MIB_FRAME_GET:
-        ((PTM_FRAME_MIB_T *)ifr->ifr_data)->RxCorrect   = WAN_MIB_TABLE[ndev].wrx_correct_pdu;
-        ((PTM_FRAME_MIB_T *)ifr->ifr_data)->TC_CrcError = WAN_MIB_TABLE[ndev].wrx_tccrc_err_pdu;
-        ((PTM_FRAME_MIB_T *)ifr->ifr_data)->RxDropped   = WAN_MIB_TABLE[ndev].wrx_nodesc_drop_pdu + WAN_MIB_TABLE[ndev].wrx_len_violation_drop_pdu;
-        ((PTM_FRAME_MIB_T *)ifr->ifr_data)->TxSend      = WAN_MIB_TABLE[ndev].wtx_total_pdu;
+        ((PTM_FRAME_MIB_T *)data)->RxCorrect   = WAN_MIB_TABLE[ndev].wrx_correct_pdu;
+        ((PTM_FRAME_MIB_T *)data)->TC_CrcError = WAN_MIB_TABLE[ndev].wrx_tccrc_err_pdu;
+        ((PTM_FRAME_MIB_T *)data)->RxDropped   = WAN_MIB_TABLE[ndev].wrx_nodesc_drop_pdu + WAN_MIB_TABLE[ndev].wrx_len_violation_drop_pdu;
+        ((PTM_FRAME_MIB_T *)data)->TxSend      = WAN_MIB_TABLE[ndev].wtx_total_pdu;
         break;
     case IFX_PTM_CFG_GET:
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxEthCrcPresent = CFG_ETH_EFMTC_CRC->rx_eth_crc_present;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxEthCrcCheck   = CFG_ETH_EFMTC_CRC->rx_eth_crc_check;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxTcCrcCheck    = CFG_ETH_EFMTC_CRC->rx_tc_crc_check;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxTcCrcLen      = CFG_ETH_EFMTC_CRC->rx_tc_crc_len;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxEthCrcGen     = CFG_ETH_EFMTC_CRC->tx_eth_crc_gen;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxTcCrcGen      = CFG_ETH_EFMTC_CRC->tx_tc_crc_gen;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxTcCrcLen      = CFG_ETH_EFMTC_CRC->tx_tc_crc_len;
+        ((IFX_PTM_CFG_T *)data)->RxEthCrcPresent = CFG_ETH_EFMTC_CRC->rx_eth_crc_present;
+        ((IFX_PTM_CFG_T *)data)->RxEthCrcCheck   = CFG_ETH_EFMTC_CRC->rx_eth_crc_check;
+        ((IFX_PTM_CFG_T *)data)->RxTcCrcCheck    = CFG_ETH_EFMTC_CRC->rx_tc_crc_check;
+        ((IFX_PTM_CFG_T *)data)->RxTcCrcLen      = CFG_ETH_EFMTC_CRC->rx_tc_crc_len;
+        ((IFX_PTM_CFG_T *)data)->TxEthCrcGen     = CFG_ETH_EFMTC_CRC->tx_eth_crc_gen;
+        ((IFX_PTM_CFG_T *)data)->TxTcCrcGen      = CFG_ETH_EFMTC_CRC->tx_tc_crc_gen;
+        ((IFX_PTM_CFG_T *)data)->TxTcCrcLen      = CFG_ETH_EFMTC_CRC->tx_tc_crc_len;
         break;
     case IFX_PTM_CFG_SET:
-        CFG_ETH_EFMTC_CRC->rx_eth_crc_present   = ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxEthCrcPresent ? 1 : 0;
-        CFG_ETH_EFMTC_CRC->rx_eth_crc_check     = ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxEthCrcCheck ? 1 : 0;
-        if ( ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxTcCrcCheck && (((IFX_PTM_CFG_T *)ifr->ifr_data)->RxTcCrcLen == 16 || ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxTcCrcLen == 32) )
+        CFG_ETH_EFMTC_CRC->rx_eth_crc_present   = ((IFX_PTM_CFG_T *)data)->RxEthCrcPresent ? 1 : 0;
+        CFG_ETH_EFMTC_CRC->rx_eth_crc_check     = ((IFX_PTM_CFG_T *)data)->RxEthCrcCheck ? 1 : 0;
+        if ( ((IFX_PTM_CFG_T *)data)->RxTcCrcCheck && (((IFX_PTM_CFG_T *)data)->RxTcCrcLen == 16 || ((IFX_PTM_CFG_T *)data)->RxTcCrcLen == 32) )
         {
             CFG_ETH_EFMTC_CRC->rx_tc_crc_check  = 1;
-            CFG_ETH_EFMTC_CRC->rx_tc_crc_len    = ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxTcCrcLen;
+            CFG_ETH_EFMTC_CRC->rx_tc_crc_len    = ((IFX_PTM_CFG_T *)data)->RxTcCrcLen;
         }
         else
         {
             CFG_ETH_EFMTC_CRC->rx_tc_crc_check  = 0;
             CFG_ETH_EFMTC_CRC->rx_tc_crc_len    = 0;
         }
-        CFG_ETH_EFMTC_CRC->tx_eth_crc_gen       = ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxEthCrcGen ? 1 : 0;
-        if ( ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxTcCrcGen && (((IFX_PTM_CFG_T *)ifr->ifr_data)->TxTcCrcLen == 16 || ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxTcCrcLen == 32) )
+        CFG_ETH_EFMTC_CRC->tx_eth_crc_gen       = ((IFX_PTM_CFG_T *)data)->TxEthCrcGen ? 1 : 0;
+        if ( ((IFX_PTM_CFG_T *)data)->TxTcCrcGen && (((IFX_PTM_CFG_T *)data)->TxTcCrcLen == 16 || ((IFX_PTM_CFG_T *)data)->TxTcCrcLen == 32) )
         {
             CFG_ETH_EFMTC_CRC->tx_tc_crc_gen    = 1;
-            CFG_ETH_EFMTC_CRC->tx_tc_crc_len    = ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxTcCrcLen;
+            CFG_ETH_EFMTC_CRC->tx_tc_crc_len    = ((IFX_PTM_CFG_T *)data)->TxTcCrcLen;
         }
         else
         {

package/kernel/lantiq/ltq-ptm/src/ifxmips_ptm_vdsl.c

@@ -76,7 +76,7 @@ static int ptm_stop(struct net_device *);
   static unsigned int ptm_poll(int, unsigned int);
   static int ptm_napi_poll(struct napi_struct *, int);
 static int ptm_hard_start_xmit(struct sk_buff *, struct net_device *);
-static int ptm_ioctl(struct net_device *, struct ifreq *, int);
+static int ptm_ioctl(struct net_device *, struct ifreq *, void __user *, int);
 #if LINUX_VERSION_CODE < KERNEL_VERSION(5,6,0)
 static void ptm_tx_timeout(struct net_device *);
 #else
@@ -120,7 +120,7 @@ static struct net_device_ops g_ptm_netdev_ops = {
     .ndo_start_xmit      = ptm_hard_start_xmit,
     .ndo_validate_addr   = eth_validate_addr,
     .ndo_set_mac_address = eth_mac_addr,
-    .ndo_do_ioctl        = ptm_ioctl,
+    .ndo_siocdevprivate  = ptm_ioctl,
     .ndo_tx_timeout      = ptm_tx_timeout,
 };
 
@@ -370,62 +370,62 @@ PTM_HARD_START_XMIT_FAIL:
     return 0;
 }
 
-static int ptm_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+static int ptm_ioctl(struct net_device *dev, struct ifreq *ifr, void __user *data, int cmd)
 {
     ASSERT(dev == g_net_dev[0], "incorrect device");
 
     switch ( cmd )
     {
     case IFX_PTM_MIB_CW_GET:
-	((PTM_CW_IF_ENTRY_T *)ifr->ifr_data)->ifRxNoIdleCodewords   = IFX_REG_R32(DREG_AR_CELL0) + IFX_REG_R32(DREG_AR_CELL1);
-        ((PTM_CW_IF_ENTRY_T *)ifr->ifr_data)->ifRxIdleCodewords     = IFX_REG_R32(DREG_AR_IDLE_CNT0) + IFX_REG_R32(DREG_AR_IDLE_CNT1);
-        ((PTM_CW_IF_ENTRY_T *)ifr->ifr_data)->ifRxCodingViolation   = IFX_REG_R32(DREG_AR_CVN_CNT0) + IFX_REG_R32(DREG_AR_CVN_CNT1) + IFX_REG_R32(DREG_AR_CVNP_CNT0) + IFX_REG_R32(DREG_AR_CVNP_CNT1);
-        ((PTM_CW_IF_ENTRY_T *)ifr->ifr_data)->ifTxNoIdleCodewords   = IFX_REG_R32(DREG_AT_CELL0) + IFX_REG_R32(DREG_AT_CELL1);
-        ((PTM_CW_IF_ENTRY_T *)ifr->ifr_data)->ifTxIdleCodewords     = IFX_REG_R32(DREG_AT_IDLE_CNT0) + IFX_REG_R32(DREG_AT_IDLE_CNT1);
+	((PTM_CW_IF_ENTRY_T *)data)->ifRxNoIdleCodewords   = IFX_REG_R32(DREG_AR_CELL0) + IFX_REG_R32(DREG_AR_CELL1);
+        ((PTM_CW_IF_ENTRY_T *)data)->ifRxIdleCodewords     = IFX_REG_R32(DREG_AR_IDLE_CNT0) + IFX_REG_R32(DREG_AR_IDLE_CNT1);
+        ((PTM_CW_IF_ENTRY_T *)data)->ifRxCodingViolation   = IFX_REG_R32(DREG_AR_CVN_CNT0) + IFX_REG_R32(DREG_AR_CVN_CNT1) + IFX_REG_R32(DREG_AR_CVNP_CNT0) + IFX_REG_R32(DREG_AR_CVNP_CNT1);
+        ((PTM_CW_IF_ENTRY_T *)data)->ifTxNoIdleCodewords   = IFX_REG_R32(DREG_AT_CELL0) + IFX_REG_R32(DREG_AT_CELL1);
+        ((PTM_CW_IF_ENTRY_T *)data)->ifTxIdleCodewords     = IFX_REG_R32(DREG_AT_IDLE_CNT0) + IFX_REG_R32(DREG_AT_IDLE_CNT1);
         break;
     case IFX_PTM_MIB_FRAME_GET:
 	{
-            PTM_FRAME_MIB_T data = {0};
+            PTM_FRAME_MIB_T tmp = {0};
             int i;
 
-            data.RxCorrect = IFX_REG_R32(DREG_AR_HEC_CNT0) + IFX_REG_R32(DREG_AR_HEC_CNT1) + IFX_REG_R32(DREG_AR_AIIDLE_CNT0) + IFX_REG_R32(DREG_AR_AIIDLE_CNT1);
+            tmp.RxCorrect = IFX_REG_R32(DREG_AR_HEC_CNT0) + IFX_REG_R32(DREG_AR_HEC_CNT1) + IFX_REG_R32(DREG_AR_AIIDLE_CNT0) + IFX_REG_R32(DREG_AR_AIIDLE_CNT1);
             for ( i = 0; i < 4; i++ )
-                data.RxDropped += WAN_RX_MIB_TABLE(i)->wrx_dropdes_pdu;
+                tmp.RxDropped += WAN_RX_MIB_TABLE(i)->wrx_dropdes_pdu;
             for ( i = 0; i < 8; i++ )
-                data.TxSend    += WAN_TX_MIB_TABLE(i)->wtx_total_pdu;
+                tmp.TxSend    += WAN_TX_MIB_TABLE(i)->wtx_total_pdu;
 
-            *((PTM_FRAME_MIB_T *)ifr->ifr_data) = data;
+            *((PTM_FRAME_MIB_T *)data) = tmp;
         }
         break;
     case IFX_PTM_CFG_GET:
 	//  use bear channel 0 preemption gamma interface settings
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxEthCrcPresent = 1;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxEthCrcCheck   = RX_GAMMA_ITF_CFG(0)->rx_eth_fcs_ver_dis == 0 ? 1 : 0;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxTcCrcCheck    = RX_GAMMA_ITF_CFG(0)->rx_tc_crc_ver_dis == 0 ? 1 : 0;;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxTcCrcLen      = RX_GAMMA_ITF_CFG(0)->rx_tc_crc_size == 0 ? 0 : (RX_GAMMA_ITF_CFG(0)->rx_tc_crc_size * 16);
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxEthCrcGen     = TX_GAMMA_ITF_CFG(0)->tx_eth_fcs_gen_dis == 0 ? 1 : 0;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxTcCrcGen      = TX_GAMMA_ITF_CFG(0)->tx_tc_crc_size == 0 ? 0 : 1;
-        ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxTcCrcLen      = TX_GAMMA_ITF_CFG(0)->tx_tc_crc_size == 0 ? 0 : (TX_GAMMA_ITF_CFG(0)->tx_tc_crc_size * 16);
+        ((IFX_PTM_CFG_T *)data)->RxEthCrcPresent = 1;
+        ((IFX_PTM_CFG_T *)data)->RxEthCrcCheck   = RX_GAMMA_ITF_CFG(0)->rx_eth_fcs_ver_dis == 0 ? 1 : 0;
+        ((IFX_PTM_CFG_T *)data)->RxTcCrcCheck    = RX_GAMMA_ITF_CFG(0)->rx_tc_crc_ver_dis == 0 ? 1 : 0;;
+        ((IFX_PTM_CFG_T *)data)->RxTcCrcLen      = RX_GAMMA_ITF_CFG(0)->rx_tc_crc_size == 0 ? 0 : (RX_GAMMA_ITF_CFG(0)->rx_tc_crc_size * 16);
+        ((IFX_PTM_CFG_T *)data)->TxEthCrcGen     = TX_GAMMA_ITF_CFG(0)->tx_eth_fcs_gen_dis == 0 ? 1 : 0;
+        ((IFX_PTM_CFG_T *)data)->TxTcCrcGen      = TX_GAMMA_ITF_CFG(0)->tx_tc_crc_size == 0 ? 0 : 1;
+        ((IFX_PTM_CFG_T *)data)->TxTcCrcLen      = TX_GAMMA_ITF_CFG(0)->tx_tc_crc_size == 0 ? 0 : (TX_GAMMA_ITF_CFG(0)->tx_tc_crc_size * 16);
         break;
     case IFX_PTM_CFG_SET:
 	{
             int i;
 
             for ( i = 0; i < 4; i++ ) {
-                RX_GAMMA_ITF_CFG(i)->rx_eth_fcs_ver_dis = ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxEthCrcCheck ? 0 : 1;
+                RX_GAMMA_ITF_CFG(i)->rx_eth_fcs_ver_dis = ((IFX_PTM_CFG_T *)data)->RxEthCrcCheck ? 0 : 1;
 
-                RX_GAMMA_ITF_CFG(0)->rx_tc_crc_ver_dis = ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxTcCrcCheck ? 0 : 1;
+                RX_GAMMA_ITF_CFG(0)->rx_tc_crc_ver_dis = ((IFX_PTM_CFG_T *)data)->RxTcCrcCheck ? 0 : 1;
 
-                switch ( ((IFX_PTM_CFG_T *)ifr->ifr_data)->RxTcCrcLen ) {
+                switch ( ((IFX_PTM_CFG_T *)data)->RxTcCrcLen ) {
                     case 16: RX_GAMMA_ITF_CFG(0)->rx_tc_crc_size = 1; break;
                     case 32: RX_GAMMA_ITF_CFG(0)->rx_tc_crc_size = 2; break;
                     default: RX_GAMMA_ITF_CFG(0)->rx_tc_crc_size = 0;
                 }
 
-                TX_GAMMA_ITF_CFG(0)->tx_eth_fcs_gen_dis = ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxEthCrcGen ? 0 : 1;
+                TX_GAMMA_ITF_CFG(0)->tx_eth_fcs_gen_dis = ((IFX_PTM_CFG_T *)data)->TxEthCrcGen ? 0 : 1;
 
-                if ( ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxTcCrcGen ) {
-                    switch ( ((IFX_PTM_CFG_T *)ifr->ifr_data)->TxTcCrcLen ) {
+                if ( ((IFX_PTM_CFG_T *)data)->TxTcCrcGen ) {
+                    switch ( ((IFX_PTM_CFG_T *)data)->TxTcCrcLen ) {
                         case 16: TX_GAMMA_ITF_CFG(0)->tx_tc_crc_size = 1; break;
                         case 32: TX_GAMMA_ITF_CFG(0)->tx_tc_crc_size = 2; break;
                         default: TX_GAMMA_ITF_CFG(0)->tx_tc_crc_size = 0;
@@ -440,7 +440,7 @@ static int ptm_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
         {
             struct ppe_prio_q_map cmd;
 
-            if ( copy_from_user(&cmd, ifr->ifr_data, sizeof(cmd)) )
+            if ( copy_from_user(&cmd, data, sizeof(cmd)) )
                 return -EFAULT;
 
             if ( cmd.pkt_prio < 0 || cmd.pkt_prio >= ARRAY_SIZE(g_ptm_prio_queue_map) )

package/kernel/lantiq/ltq-vmmc/Makefile

@@ -29,6 +29,7 @@ define KernelPackage/ltq-vmmc
   DEPENDS:=@(TARGET_lantiq_xway||TARGET_lantiq_xrx200) +kmod-ltq-tapi
   FILES:=$(PKG_BUILD_DIR)/src/drv_vmmc.ko
   AUTOLOAD:=$(call AutoProbe,drv_vmmc)
+  USERID:=:vmmc=386
 endef
 
 define KernelPackage/ltq-vmmc/description

package/kernel/lantiq/ltq-vmmc/files/vmmc.init

@@ -8,6 +8,7 @@ start() {
 	for i in 10 11 12 13 14 15 16 17 18; do
 		if ! [ -e /dev/vmmc$i ]; then
 			mknod -m 664 /dev/vmmc$i c 122 $i
+			chown root:vmmc /dev/vmmc$i
 		fi
 	done
 }

package/kernel/leds-gca230718/Makefile

@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2008-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=leds-gca230718
+PKG_RELEASE:=1
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/leds-gca230718
+  SUBMENU:=LED modules
+  TITLE:=GCA230718 LED support (e.g. for D-Link M30)
+  FILES:= \
+	$(PKG_BUILD_DIR)/leds-gca230718.ko
+  AUTOLOAD:=$(call AutoProbe,leds-gca230718,1)
+  DEPENDS:=@TARGET_mediatek_filogic
+endef
+
+define KernelPackage/leds-gca230718/description
+  GCA230718 LED support (e.g. for D-Link M30) using I2C.
+endef
+
+define Build/Compile
+	$(KERNEL_MAKE) M="$(PKG_BUILD_DIR)" modules
+endef
+
+$(eval $(call KernelPackage,leds-gca230718))

package/kernel/leds-gca230718/src/Makefile

@@ -0,0 +1 @@
+obj-m := leds-gca230718.o

package/kernel/leds-gca230718/src/leds-gca230718.c

@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GCA230718 LED support (e.g. for D-Link M30) using I2C
+ *
+ * Copyright 2022 Roland Reinl <reinlroland+github@gmail.com>
+ *
+ * This driver can control RGBW LEDs which are connected to a GCA230718.
+ */
+
+#include <linux/delay.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/version.h>
+
+#define GCA230718_MAX_LEDS                                      (4u)
+
+#define GCA230718_OPMODE_DISABLED                               (0x00u)
+#define GCA230718_OPMODE_NO_TOGGLE                              (0x01u)
+#define GCA230718_OPMODE_TOGGLE_RAMP_CONTROL_DISABLED           (0x02u)
+#define GCA230718_OPMODE_TOGGLE_RAMP_CONTROL_ENSABLED           (0x03u)
+
+#define GCA230718_1ST_SEQUENCE_BYTE_1                           (0x02u)
+#define GCA230718_2ND_SEQUENCE_BYTE_1                           (0x01u)
+#define GCA230718_3RD_SEQUENCE_BYTE_1                           (0x03u)
+
+struct gca230718_led
+{
+	enum led_brightness brightness;
+	struct i2c_client *client;
+	struct led_classdev ledClassDev;
+};
+
+struct gca230718_private
+{
+	struct mutex lock;
+	struct gca230718_led leds[GCA230718_MAX_LEDS];
+};
+
+static void gca230718_init_private_led_data(struct gca230718_private* data)
+{
+	u8 ledIndex;
+	for (ledIndex = 0; ledIndex < GCA230718_MAX_LEDS; ledIndex++)
+	{
+		data->leds[ledIndex].client = NULL;
+	}
+}
+
+static void gca230718_send_sequence(struct i2c_client *client, u8 byte0, struct gca230718_private* gca230718_privateData)
+{
+	int status = 0;
+	u8 ledIndex;
+	const u8 resetCommand[2] = { 0x81, 0xE4 };
+	const u8 resetCommandRegister = 0x00;
+
+	u8 controlCommand[13];
+	const u8 controlCommandRegister = 0x03;
+
+	controlCommand[0] = 0x0C; /* Unknown */
+	controlCommand[1] = byte0;
+	controlCommand[2] = GCA230718_OPMODE_NO_TOGGLE;
+	/* Byte 3-6 are set below to the brighness value of the individual LEDs */
+	controlCommand[7] = 0x01; /* Frequency, doesn't care as long as GCA230718_OPMODE_NO_TOGGLE is used above */
+	/* Byte 8-11 are set below to the brighness value of the individual LEDs */
+	controlCommand[12] = 0x87;
+
+	for (ledIndex = 0; ledIndex < GCA230718_MAX_LEDS; ledIndex++)
+	{
+		controlCommand[3 + ledIndex] = gca230718_privateData->leds[ledIndex].brightness;
+		controlCommand[8 + ledIndex] = gca230718_privateData->leds[ledIndex].brightness;
+	}
+
+	mutex_lock(&(gca230718_privateData->lock));
+
+	if ((status = i2c_smbus_write_i2c_block_data(client, resetCommandRegister, sizeof(resetCommand), resetCommand)) != 0)
+	{
+		pr_info("Error %i during call of i2c_smbus_write_i2c_block_data for reset command\n", status);
+	}
+	else if ((status = i2c_smbus_write_i2c_block_data(client, controlCommandRegister, sizeof(controlCommand), controlCommand)) != 0)
+	{
+		pr_info("Error %i during call of i2c_smbus_write_i2c_block_data for control command\n", status);
+	}
+
+	mutex_unlock(&(gca230718_privateData->lock));
+}
+
+static int gca230718_set_brightness(struct led_classdev *led_cdev, enum led_brightness value)
+{
+	struct gca230718_led* led;
+	struct i2c_client* client;
+
+	led = container_of(led_cdev, struct gca230718_led, ledClassDev);
+	client = led->client;
+
+	if (client != NULL)
+	{
+		struct gca230718_private* gca230718_privateData;
+
+		led->brightness = value;
+		gca230718_privateData = i2c_get_clientdata(client);
+
+		gca230718_send_sequence(client, GCA230718_2ND_SEQUENCE_BYTE_1, gca230718_privateData);
+	}
+
+	return 0;
+}
+
+static int gca230718_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	int status = 0;
+	struct gca230718_private* gca230718_privateData;
+
+	pr_info("Enter gca230718_probe for device address %u\n", client->addr);
+	gca230718_privateData = devm_kzalloc(&(client->dev), sizeof(struct gca230718_private), GFP_KERNEL);
+
+	if (gca230718_privateData == NULL)
+	{
+		pr_info("Error during allocating memory for private data\n");
+		status = -ENOMEM;
+	}
+	else
+	{
+		struct device_node* ledNode;
+		mutex_init(&gca230718_privateData->lock);
+		gca230718_init_private_led_data(gca230718_privateData);
+		i2c_set_clientdata(client, gca230718_privateData);
+
+		for_each_child_of_node(client->dev.of_node, ledNode)
+		{
+			u32 regValue = 0;
+			if (of_property_read_u32(ledNode, "reg", &regValue) != 0)
+			{
+				pr_info("Missing entry \"reg\" in node %s\n", ledNode->name); 
+			}
+			else if (regValue >= GCA230718_MAX_LEDS)
+			{
+				pr_info("Invalid entry \"reg\" in node %s (%u)\n", ledNode->name, regValue);
+			}
+			else
+			{
+				struct led_classdev* ledClassDev = &(gca230718_privateData->leds[regValue].ledClassDev);
+				struct led_init_data init_data = {};
+
+				gca230718_privateData->leds[regValue].client = client;
+				init_data.fwnode = of_fwnode_handle(ledNode);
+
+				pr_info("Creating LED for node %s: reg=%u\n", ledNode->name, regValue); 
+
+				ledClassDev->name = of_get_property(ledNode, "label", NULL);
+				if (ledClassDev->name == NULL)
+				{
+					ledClassDev->name = ledNode->name;
+				}
+
+				ledClassDev->brightness = LED_OFF;
+				ledClassDev->max_brightness = LED_FULL;
+				ledClassDev->brightness_set_blocking = gca230718_set_brightness;
+	
+				if (devm_led_classdev_register_ext(&(client->dev), ledClassDev, &init_data) != 0)
+				{
+					pr_info("Error during call of devm_led_classdev_register_ext");
+				}
+			}
+		}
+	}
+
+	if (status == 0)
+	{
+		/* 
+		Send full initialization sequence.
+		Afterwards only GCA230718_2ND_SEQUENCE_BYTE_1 must be send to upddate the brightness values.
+		*/
+		gca230718_send_sequence(client, GCA230718_1ST_SEQUENCE_BYTE_1, gca230718_privateData);
+		gca230718_send_sequence(client, GCA230718_2ND_SEQUENCE_BYTE_1, gca230718_privateData);
+		gca230718_send_sequence(client, GCA230718_3RD_SEQUENCE_BYTE_1, gca230718_privateData);
+	}
+
+	return status;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,18,0)
+static void gca230718_remove(struct i2c_client *client)
+#else
+static int gca230718_remove(struct i2c_client *client)
+#endif
+{
+	struct gca230718_private* gca230718_privateData;
+	gca230718_privateData = i2c_get_clientdata(client);
+	mutex_destroy(&gca230718_privateData->lock);
+	gca230718_init_private_led_data(gca230718_privateData);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,18,0)
+	return 0;
+#endif
+}
+
+static const struct i2c_device_id gca230718_i2c_ids[] = {
+	{ "gca230718", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, gca230718_i2c_ids);
+
+static const struct of_device_id gca230718_dt_ids[] = {
+	{ .compatible = "unknown,gca230718" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, gca230718_dt_ids);
+
+static struct i2c_driver gca230718_driver = {
+	.probe		= gca230718_probe,
+	.remove		= gca230718_remove,
+	.id_table	= gca230718_i2c_ids,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= gca230718_dt_ids,
+	},
+};
+
+module_i2c_driver(gca230718_driver);
+
+MODULE_AUTHOR("Roland Reinl <reinlroland+github@gmail.com>");
+MODULE_DESCRIPTION("GCA230718 LED support (e.g. for D-Link M30) using I2C");
+MODULE_LICENSE("GPL");

package/kernel/linux/Makefile

@@ -16,8 +16,8 @@ SUBTARGETS = $(sort $(filter-out feeds,$(notdir $(wildcard $(TOPDIR)/target/linu
 SUBTARGET_MODULES = $(foreach t,$(SUBTARGETS),$(firstword $(wildcard $(TOPDIR)/target/linux/feeds/$(t)/modules.mk $(TOPDIR)/target/linux/$(t)/modules.mk)))
 SCAN_DEPS=modules/*.mk $(SUBTARGET_MODULES) $(TOPDIR)/include/netfilter.mk
 
-PKG_LICENSE:=GPL-2.0
-PKG_LICENSE_FILES:=
+PKG_LICENSE:=GPL-2.0-only
+PKG_LICENSE_FILES:=COPYING
 
 export SHELL:=/bin/sh
 .ONESHELL:

package/kernel/linux/modules/crypto.mk

@@ -80,6 +80,18 @@ endef
 $(eval $(call KernelPackage,crypto-authenc))
 
 
+define KernelPackage/crypto-blake2b
+  TITLE:=Support for BLAKE2b cryptographic hash function (RFC 7693)
+  DEPENDS:=+kmod-crypto-hash
+  KCONFIG:=CONFIG_CRYPTO_BLAKE2B
+  FILES:=$(LINUX_DIR)/crypto/blake2b_generic.ko
+  AUTOLOAD:=$(call AutoLoad,09,blake2b_generic)
+  $(call AddDepends/crypto)
+endef
+
+$(eval $(call KernelPackage,crypto-blake2b))
+
+
 define KernelPackage/crypto-cbc
   TITLE:=Cipher Block Chaining CryptoAPI module
   DEPENDS:=+kmod-crypto-manager
@@ -700,7 +712,6 @@ define KernelPackage/crypto-misc
 	CONFIG_CRYPTO_CAMELLIA \
 	CONFIG_CRYPTO_CAST5 \
 	CONFIG_CRYPTO_CAST6 \
-	CONFIG_CRYPTO_FCRYPT \
 	CONFIG_CRYPTO_KHAZAD \
 	CONFIG_CRYPTO_SERPENT \
 	CONFIG_CRYPTO_TEA \
@@ -1041,3 +1052,15 @@ endef
 
 $(eval $(call KernelPackage,crypto-xts))
 
+
+define KernelPackage/crypto-xxhash
+  TITLE:=xxHash non-cryptographic hash algorithm
+  DEPENDS:=+kmod-crypto-hash +kmod-lib-xxhash
+  KCONFIG:=CONFIG_CRYPTO_XXHASH
+  FILES:=$(LINUX_DIR)/crypto/xxhash_generic.ko
+  AUTOLOAD:=$(call AutoLoad,09,xxhash_generic)
+  $(call AddDepends/crypto)
+endef
+
+$(eval $(call KernelPackage,crypto-xxhash))
+

package/kernel/linux/modules/fs.mk

@@ -67,7 +67,7 @@ $(eval $(call KernelPackage,fs-autofs4))
 define KernelPackage/fs-btrfs
   SUBMENU:=$(FS_MENU)
   TITLE:=BTRFS filesystem support
-  DEPENDS:=+kmod-lib-crc32c +kmod-lib-lzo +kmod-lib-zlib-inflate +kmod-lib-zlib-deflate +kmod-lib-raid6 +kmod-lib-xor +kmod-lib-zstd
+  DEPENDS:=+kmod-lib-crc32c +kmod-lib-lzo +kmod-lib-zlib-inflate +kmod-lib-zlib-deflate +kmod-lib-raid6 +kmod-lib-xor +kmod-lib-zstd +kmod-crypto-blake2b +kmod-crypto-xxhash
   KCONFIG:=\
 	CONFIG_BTRFS_FS \
 	CONFIG_BTRFS_FS_CHECK_INTEGRITY=n
@@ -352,8 +352,7 @@ define KernelPackage/fs-ksmbd
   DEPENDS:= \
 	  +kmod-nls-base \
 	  +kmod-nls-utf8 \
-	  +kmod-crypto-md4 \
-          +kmod-crypto-md5 \
+	  +kmod-crypto-md5 \
 	  +kmod-crypto-hmac \
 	  +kmod-crypto-ecb \
 	  +kmod-crypto-des \

package/kernel/linux/modules/hwmon.mk

@@ -116,7 +116,7 @@ define KernelPackage/hwmon-gsc
 	$(LINUX_DIR)/drivers/mfd/gateworks-gsc.ko \
 	$(LINUX_DIR)/drivers/hwmon/gsc-hwmon.ko
   AUTOLOAD:=$(call AutoLoad,20,gsc-hwmon,1)
-  $(call AddDepends/hwmon,+kmod-i2c-core)
+  $(call AddDepends/hwmon,+kmod-i2c-core +kmod-mfd)
 endef
 
 define KernelPackage/hwmon-gsc/description

package/kernel/linux/modules/leds.mk

@@ -245,3 +245,37 @@ define KernelPackage/input-leds/description
 endef
 
 $(eval $(call KernelPackage,input-leds))
+
+
+define KernelPackage/leds-lp55xx-common
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=LED common driver for LP5521/LP5523/LP55231/LP5562 controllers
+  DEPENDS:=+kmod-i2c-core
+  KCONFIG:=CONFIG_LEDS_LP55XX_COMMON
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-lp55xx-common.ko
+  AUTOLOAD:=$(call AutoLoad,60,leds-lp55xx-common,1)
+endef
+
+define KernelPackage/leds-lp55xx-common/description
+ This option enables support for Texas Instruments
+ LP5521/LP5523/LP55231/LP5562 common driver.
+endef
+
+$(eval $(call KernelPackage,leds-lp55xx-common))
+
+
+define KernelPackage/leds-lp5562
+  SUBMENU:=$(LEDS_MENU)
+  TITLE:=LED driver for LP5562 controllers
+  DEPENDS:=+kmod-i2c-core +kmod-leds-lp55xx-common
+  KCONFIG:=CONFIG_LEDS_LP5562
+  FILES:=$(LINUX_DIR)/drivers/leds/leds-lp5562.ko
+  AUTOLOAD:=$(call AutoLoad,60,leds-lp5562,1)
+endef
+
+define KernelPackage/leds-lp5562/description
+ This option enables support for Texas Instruments LP5562
+ LED controllers.
+endef
+
+$(eval $(call KernelPackage,leds-lp5562))

package/kernel/linux/modules/lib.mk

@@ -122,21 +122,30 @@ endef
 $(eval $(call KernelPackage,lib-lzo))
 
 
+define KernelPackage/lib-xxhash
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=xxhash support
+  HIDDEN:=1
+  KCONFIG:=CONFIG_XXHASH
+  FILES:=$(LINUX_DIR)/lib/xxhash.ko
+endef
+
+$(eval $(call KernelPackage,lib-xxhash))
+
+
 define KernelPackage/lib-zstd
   SUBMENU:=$(LIB_MENU)
   TITLE:=ZSTD support
-  DEPENDS:=+kmod-crypto-acompress
+  DEPENDS:=+kmod-crypto-acompress +kmod-lib-xxhash
   KCONFIG:= \
 	CONFIG_CRYPTO_ZSTD \
 	CONFIG_ZSTD_COMPRESS \
-	CONFIG_ZSTD_DECOMPRESS \
-	CONFIG_XXHASH
+	CONFIG_ZSTD_DECOMPRESS
   FILES:= \
 	$(LINUX_DIR)/crypto/zstd.ko \
-	$(LINUX_DIR)/lib/xxhash.ko \
 	$(LINUX_DIR)/lib/zstd/zstd_compress.ko \
 	$(LINUX_DIR)/lib/zstd/zstd_decompress.ko
-  AUTOLOAD:=$(call AutoProbe,xxhash zstd zstd_compress zstd_decompress)
+  AUTOLOAD:=$(call AutoProbe,zstd zstd_compress zstd_decompress)
 endef
 
 define KernelPackage/lib-zstd/description
@@ -146,21 +155,28 @@ endef
 $(eval $(call KernelPackage,lib-zstd))
 
 
+define KernelPackage/lib-lz4-decompress
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=LZ4 decompress
+  HIDDEN:=1
+  KCONFIG:=CONFIG_LZ4_DECOMPRESS
+  FILES:=$(LINUX_DIR)/lib/lz4/lz4_decompress.ko
+endef
+
+$(eval $(call KernelPackage,lib-lz4-decompress))
+
+
 define KernelPackage/lib-lz4
   SUBMENU:=$(LIB_MENU)
   TITLE:=LZ4 support
-  DEPENDS:=+kmod-crypto-acompress
+  DEPENDS:=+kmod-crypto-acompress +kmod-lib-lz4-decompress
   KCONFIG:= \
 	CONFIG_CRYPTO_LZ4 \
-	CONFIG_CRYPTO_LZ4HC \
-	CONFIG_LZ4_COMPRESS \
-	CONFIG_LZ4_DECOMPRESS
+	CONFIG_LZ4_COMPRESS
   FILES:= \
 	$(LINUX_DIR)/crypto/lz4.ko \
-	$(LINUX_DIR)/lib/lz4/lz4_compress.ko \
-	$(LINUX_DIR)/lib/lz4/lz4hc_compress.ko \
-	$(LINUX_DIR)/lib/lz4/lz4_decompress.ko
-  AUTOLOAD:=$(call AutoProbe,lz4 lz4_compress lz4hc_compress lz4_decompress)
+	$(LINUX_DIR)/lib/lz4/lz4_compress.ko
+  AUTOLOAD:=$(call AutoProbe,lz4 lz4_compress)
 endef
 
 define KernelPackage/lib-lz4/description
@@ -170,6 +186,26 @@ endef
 $(eval $(call KernelPackage,lib-lz4))
 
 
+define KernelPackage/lib-lz4hc
+  SUBMENU:=$(LIB_MENU)
+  TITLE:=LZ4HC support
+  DEPENDS:=+kmod-crypto-acompress +kmod-lib-lz4-decompress
+  KCONFIG:= \
+	CONFIG_CRYPTO_LZ4HC \
+	CONFIG_LZ4HC_COMPRESS
+  FILES:= \
+	$(LINUX_DIR)/crypto/lz4hc.ko \
+	$(LINUX_DIR)/lib/lz4/lz4hc_compress.ko
+  AUTOLOAD:=$(call AutoProbe,lz4hc lz4hc_compress)
+endef
+
+define KernelPackage/lib-lz4hc/description
+ Kernel module for LZ4HC compression/decompression support
+endef
+
+$(eval $(call KernelPackage,lib-lz4hc))
+
+
 define KernelPackage/lib-842
   SUBMENU:=$(LIB_MENU)
   TITLE:=842 support

package/kernel/linux/modules/netdevices.mk

@@ -361,9 +361,9 @@ $(eval $(call KernelPackage,phy-smsc))
 define KernelPackage/phy-aquantia
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Aquantia Ethernet PHYs
-  DEPENDS:=+kmod-libphy +kmod-hwmon-core
+  DEPENDS:=+kmod-libphy +kmod-hwmon-core +kmod-lib-crc-ccitt
   KCONFIG:=CONFIG_AQUANTIA_PHY
-  FILES:=$(LINUX_DIR)/drivers/net/phy/aquantia.ko
+  FILES:=$(LINUX_DIR)/drivers/net/phy/aquantia/aquantia.ko
   AUTOLOAD:=$(call AutoLoad,18,aquantia,1)
 endef
 

package/kernel/linux/modules/netfilter.mk

@@ -132,6 +132,22 @@ endef
 $(eval $(call KernelPackage,nf-conntrack6))
 
 
+define KernelPackage/nf-dup-inet
+  SUBMENU:=$(NF_MENU)
+  TITLE:=Netfilter nf_tables dup in ip/ip6/inet family support
+  HIDDEN:=1
+  DEPENDS:=+kmod-nf-conntrack +IPV6:kmod-nf-conntrack6
+  KCONFIG:= \
+	CONFIG_NF_DUP_IPV4 \
+	CONFIG_NF_DUP_IPV6
+  FILES:= \
+	$(LINUX_DIR)/net/ipv4/netfilter/nf_dup_ipv4.ko \
+	$(LINUX_DIR)/net/ipv6/netfilter/nf_dup_ipv6.ko
+endef
+
+$(eval $(call KernelPackage,nf-dup-inet))
+
+
 define KernelPackage/nf-log
   SUBMENU:=$(NF_MENU)
   TITLE:=Netfilter Logging
@@ -716,7 +732,7 @@ $(eval $(call KernelPackage,ipt-tproxy))
 
 define KernelPackage/ipt-tee
   TITLE:=TEE support
-  DEPENDS:=+kmod-ipt-conntrack
+  DEPENDS:=+kmod-ipt-conntrack +kmod-nf-dup-inet
   KCONFIG:=$(KCONFIG_IPT_TEE)
   FILES:=$(foreach mod,$(IPT_TEE-m),$(LINUX_DIR)/net/$(mod).ko)
   AUTOLOAD:=$(call AutoProbe,$(notdir nf_tee $(IPT_TEE-m)))
@@ -1150,18 +1166,14 @@ $(eval $(call KernelPackage,nft-bridge))
 define KernelPackage/nft-dup-inet
   SUBMENU:=$(NF_MENU)
   TITLE:=Netfilter nf_tables dup in ip/ip6/inet family support
-  DEPENDS:=+kmod-nft-core +kmod-nf-conntrack +IPV6:kmod-nf-conntrack6
+  DEPENDS:=+kmod-nft-core +kmod-nf-dup-inet
   KCONFIG:= \
-	CONFIG_NF_DUP_IPV4 \
-	CONFIG_NF_DUP_IPV6 \
 	CONFIG_NFT_DUP_IPV4 \
 	CONFIG_NFT_DUP_IPV6
   FILES:= \
-	$(LINUX_DIR)/net/ipv4/netfilter/nf_dup_ipv4.ko \
-	$(LINUX_DIR)/net/ipv6/netfilter/nf_dup_ipv6.ko \
 	$(LINUX_DIR)/net/ipv4/netfilter/nft_dup_ipv4.ko \
 	$(LINUX_DIR)/net/ipv6/netfilter/nft_dup_ipv6.ko
-  AUTOLOAD:=$(call AutoProbe,nf_dup_ipv4 nf_dup_ipv6 nft_dup_ipv4 nft_dup_ipv6)
+  AUTOLOAD:=$(call AutoProbe,nft_dup_ipv4 nft_dup_ipv6)
 endef
 
 $(eval $(call KernelPackage,nft-dup-inet))

package/kernel/linux/modules/netsupport.mk

@@ -993,7 +993,7 @@ endef
 $(eval $(call KernelPackage,bpf-test))
 
 
-SCHED_MODULES_EXTRA = sch_codel sch_dsmark sch_gred sch_multiq sch_sfq sch_teql sch_fq act_pedit act_simple act_csum em_cmp em_nbyte em_meta em_text
+SCHED_MODULES_EXTRA = sch_codel sch_gred sch_multiq sch_sfq sch_teql sch_fq act_pedit act_simple act_csum em_cmp em_nbyte em_meta em_text
 SCHED_FILES_EXTRA = $(foreach mod,$(SCHED_MODULES_EXTRA),$(LINUX_DIR)/net/sched/$(mod).ko)
 
 define KernelPackage/sched
@@ -1002,7 +1002,6 @@ define KernelPackage/sched
   DEPENDS:=+kmod-sched-core +kmod-lib-crc32c +kmod-lib-textsearch
   KCONFIG:= \
 	CONFIG_NET_SCH_CODEL \
-	CONFIG_NET_SCH_DSMARK \
 	CONFIG_NET_SCH_GRED \
 	CONFIG_NET_SCH_MULTIQ \
 	CONFIG_NET_SCH_SFQ \