OpenWrt v23.05.3: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

.github/workflows/Dockerfile.tools

@@ -1,4 +0,0 @@
-FROM ghcr.io/openwrt/buildbot/buildworker-v3.8.0:v2
-
-COPY --chown=buildbot staging_dir/host /prebuilt_tools/staging_dir/host
-COPY --chown=buildbot build_dir/host /prebuilt_tools/build_dir/host

.github/workflows/build-tools.yml

@@ -1,72 +0,0 @@
-name: Build host tools
-
-on:
-  workflow_call:
-    inputs:
-      generate_prebuilt_artifacts:
-        type: boolean
-
-permissions:
-  contents: read
-
-jobs:
-  build:
-    name: Build tools
-    runs-on: ubuntu-latest
-    container: ghcr.io/openwrt/buildbot/buildworker-v3.8.0:v2
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          path: openwrt
-
-      - name: Fix permission
-        run: chown -R buildbot:buildbot openwrt
-
-      - name: Set configs for tools container
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          touch .config
-          echo CONFIG_DEVEL=y >> .config
-          echo CONFIG_AUTOREMOVE=y >> .config
-          echo CONFIG_CCACHE=y >> .config
-
-      - name: Make prereq
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make defconfig
-
-      - name: Build tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Upload logs
-        if: always()
-        uses: actions/upload-artifact@v3
-        with:
-          name: linux-buildbot-logs
-          path: openwrt/logs
-
-      - name: Upload config
-        if: always()
-        uses: actions/upload-artifact@v3
-        with:
-          name: linux-buildbot-config
-          path: openwrt/.config
-
-      - name: Archive prebuilt tools
-        if: inputs.generate_prebuilt_artifacts == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: tar -cf tools.tar staging_dir/host build_dir/host
-
-      - name: Upload prebuilt tools
-        if: inputs.generate_prebuilt_artifacts == true
-        uses: actions/upload-artifact@v3
-        with:
-          name: linux-buildbot-prebuilt-tools
-          path: openwrt/tools.tar
-          retention-days: 1

.github/workflows/build.yml

@@ -1,435 +0,0 @@
-name: Build sub target
-
-on:
-  workflow_call:
-    secrets:
-      coverity_api_token:
-    inputs:
-      target:
-        required: true
-        type: string
-      subtarget:
-        required: true
-        type: string
-      testing:
-        type: boolean
-      build_toolchain:
-        type: boolean
-      include_feeds:
-        type: boolean
-      build_full:
-        type: boolean
-      build_kernel:
-        type: boolean
-      build_all_modules:
-        type: boolean
-      build_all_kmods:
-        type: boolean
-      build_all_boards:
-        type: boolean
-      use_openwrt_container:
-        type: boolean
-        default: true
-      coverity_project_name:
-        type: string
-        default: OpenWrt
-      coverity_check_packages:
-        type: string
-      coverity_compiler_template_list:
-        type: string
-        default: >-
-          arm-openwrt-linux-gcc
-      coverity_force_compile_packages:
-        type: string
-        default: >-
-          curl
-          libnl
-          mbedtls
-          wolfssl
-          openssl
-
-permissions:
-  contents: read
-
-jobs:
-  setup_build:
-    name: Setup build ${{ inputs.target }}/${{ inputs.subtarget }}
-    runs-on: ubuntu-latest
-    outputs:
-      owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
-      ccache_hash: ${{ steps.ccache_hash.outputs.ccache_hash }}
-      container_tag: ${{ steps.determine_tools_container.outputs.container_tag }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-
-      - name: Set lower case owner name
-        id: lower_owner
-        run: |
-          OWNER_LC=$(echo "${{ github.repository_owner }}" \
-            | tr '[:upper:]' '[:lower:]')
-
-          if [ ${{ inputs.use_openwrt_container }} == "true" ]; then
-            OWNER_LC=openwrt
-          fi
-
-          echo "owner_lc=$OWNER_LC" >> $GITHUB_OUTPUT
-
-      - name: Generate ccache hash
-        id: ccache_hash
-        run: |
-          CCACHE_HASH=$(md5sum include/kernel-* | awk '{ print $1 }' \
-           | md5sum | awk '{ print $1 }')
-          echo "ccache_hash=$CCACHE_HASH" >> $GITHUB_OUTPUT
-
-      # Per branch tools container tag
-      # By default stick to latest
-      # For official test targetting openwrt stable branch
-      # Get the branch or parse the tag and push dedicated tools containers
-      # For local test to use the correct container for stable release testing
-      # you need to use for the branch name a prefix of openwrt-[0-9][0-9].[0-9][0-9]-
-      - name: Determine tools container tag
-        id: determine_tools_container
-        run: |
-          CONTAINER_TAG=latest
-          if [ -n "${{ github.base_ref }}" ]; then
-            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              CONTAINER_TAG="${{ github.base_ref }}"
-            fi
-          elif [ ${{ github.ref_type }} == "branch" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              CONTAINER_TAG=${{ github.ref_name }}
-            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
-              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\)-.*/\1/')"
-            fi
-          elif [ ${{ github.ref_type }} == "tag" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
-              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/^v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
-            fi
-          fi
-          echo "Tools container to use tools:$CONTAINER_TAG"
-          echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
-
-  build:
-    name: Build ${{ inputs.target }}/${{ inputs.subtarget }}
-    needs: setup_build
-    runs-on: ubuntu-latest
-
-    container: ghcr.io/${{ needs.setup_build.outputs.owner_lc }}/tools:${{ needs.setup_build.outputs.container_tag }}
-
-    permissions:
-      contents: read
-      packages: read
-
-    steps:
-      - name: Checkout master directory
-        uses: actions/checkout@v3
-        with:
-          path: openwrt
-
-      - name: Checkout packages feed
-        if: inputs.include_feeds == true
-        uses: actions/checkout@v3
-        with:
-          repository: openwrt/packages
-          path: openwrt/feeds/packages
-
-      - name: Checkout luci feed
-        if: inputs.include_feeds == true
-        uses: actions/checkout@v3
-        with:
-          repository: openwrt/luci
-          path: openwrt/feeds/luci
-
-      - name: Checkout routing feed
-        if: inputs.include_feeds == true
-        uses: actions/checkout@v3
-        with:
-          repository: openwrt/routing
-          path: openwrt/feeds/routing
-
-      - name: Checkout telephony feed
-        if: inputs.include_feeds == true
-        uses: actions/checkout@v3
-        with:
-          repository: openwrt/telephony
-          path: openwrt/feeds/telephony
-
-      - name: Parse toolchain file
-        if: inputs.build_toolchain == false
-        id: parse-toolchain
-        working-directory: openwrt
-        run: |
-          TOOLCHAIN_PATH=snapshots
-
-          if [ -n "${{ github.base_ref }}" ]; then
-            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              major_ver="$(echo ${{ github.base_ref }} | sed 's/^openwrt-/v/')"
-            fi
-          elif [ "${{ github.ref_type }}" = "branch" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              major_ver="$(echo ${{ github.ref_name }} | sed 's/^openwrt-/v/')"
-            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
-              major_ver="$(echo ${{ github.ref_name }} | sed 's/^openwrt-\([0-9][0-9]\.[0-9][0-9]\)-.*/v\1/')"
-            fi
-          elif [ "${{ github.ref_type }}" = "tag" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
-              major_ver="$(echo ${{ github.ref_name }} | sed 's/^\(v[0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
-            fi
-          fi
-
-          if [ -n "$major_ver" ]; then
-            git fetch --tags -f
-            latest_tag="$(git tag --sort=-creatordate -l $major_ver* | head -n1)"
-            if [ -n "$latest_tag" ]; then
-              TOOLCHAIN_PATH=releases/$(echo $latest_tag | sed 's/^v//')
-            fi
-          fi
-
-          SUMS_FILE="https://downloads.cdn.openwrt.org/$TOOLCHAIN_PATH/targets/${{ inputs.target }}/${{ inputs.subtarget }}/sha256sums"
-          if curl $SUMS_FILE | grep -q ".*openwrt-toolchain.*tar.xz"; then
-            TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-toolchain.*tar.xz")"
-            TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-toolchain.*\).tar.xz/\1/p')
-            
-            echo "toolchain-type=external_toolchain" >> $GITHUB_OUTPUT
-          elif curl $SUMS_FILE | grep -q ".*openwrt-sdk.*tar.xz"; then
-            TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-sdk.*tar.xz")"
-            TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-sdk.*\).tar.xz/\1/p')
-
-            echo "toolchain-type=external_sdk" >> $GITHUB_OUTPUT
-          else
-            echo "toolchain-type=internal" >> $GITHUB_OUTPUT
-          fi
-
-          echo "TOOLCHAIN_FILE=$TOOLCHAIN_FILE" >> "$GITHUB_ENV"
-          echo "TOOLCHAIN_PATH=$TOOLCHAIN_PATH" >> "$GITHUB_ENV"
-
-      - name: Fix permission
-        run: |
-          chown -R buildbot:buildbot openwrt
-
-      - name: Prepare prebuilt tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          mkdir -p staging_dir build_dir
-          ln -s /prebuilt_tools/staging_dir/host staging_dir/host
-          ln -s /prebuilt_tools/build_dir/host build_dir/host
-
-          ./scripts/ext-tools.sh --refresh
-
-      - name: Update & Install feeds
-        if: inputs.include_feeds == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          ./scripts/feeds update -a
-          ./scripts/feeds install -a
-
-      - name: Cache ccache
-        uses: actions/cache@v3
-        with:
-          path: openwrt/.ccache
-          key: ccache-kernel-${{ inputs.target }}/${{ inputs.subtarget }}-${{ needs.setup_build.outputs.ccache_hash }}
-          restore-keys: |
-            ccache-kernel-${{ inputs.target }}/${{ inputs.subtarget }}-
-
-      - name: Download external toolchain/sdk
-        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type != 'internal'
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          wget -O - https://downloads.cdn.openwrt.org/${{ env.TOOLCHAIN_PATH }}/targets/${{ inputs.target }}/${{ inputs.subtarget }}/${{ env.TOOLCHAIN_FILE }}.tar.xz \
-            | tar --xz -xf -
-
-      - name: Configure testing kernel
-        if: inputs.testing == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_TESTING_KERNEL=y >> .config
-
-      - name: Configure all kernel modules
-        if: inputs.build_all_kmods == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_ALL_KMODS=y >> .config
-
-      - name: Configure all modules
-        if: inputs.build_all_modules == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_ALL=y >> .config
-
-      - name: Configure all boards
-        if: inputs.build_all_boards == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_TARGET_MULTI_PROFILE=y >> .config
-          echo CONFIG_TARGET_PER_DEVICE_ROOTFS=y >> .config
-          echo CONFIG_TARGET_ALL_PROFILES=y >> .config
-
-      - name: Configure external toolchain
-        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_toolchain'
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_DEVEL=y >> .config
-          echo CONFIG_AUTOREMOVE=y >> .config
-          echo CONFIG_CCACHE=y >> .config
-
-          ./scripts/ext-toolchain.sh \
-            --toolchain ${{ env.TOOLCHAIN_FILE }}/toolchain-* \
-            --overwrite-config \
-            --config ${{ inputs.target }}/${{ inputs.subtarget }}
-
-      - name: Adapt external sdk to external toolchain format
-        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk'
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          TOOLCHAIN_DIR=${{ env.TOOLCHAIN_FILE }}/staging_dir/$(ls ${{ env.TOOLCHAIN_FILE }}/staging_dir | grep toolchain)
-          TOOLCHAIN_BIN=$TOOLCHAIN_DIR/bin
-          OPENWRT_DIR=$(pwd)
-
-          # Find target name from toolchain info.mk
-          GNU_TARGET_NAME=$(cat $TOOLCHAIN_DIR/info.mk | grep TARGET_CROSS | sed 's/^TARGET_CROSS=\(.*\)-$/\1/')
-
-          cd $TOOLCHAIN_BIN
-
-          # Revert sdk wrapper scripts applied to all the bins
-          for app in $(find . -name "*.bin"); do
-            TARGET_APP=$(echo $app | sed 's/\.\/\.\(.*\)\.bin/\1/')
-            rm $TARGET_APP
-            mv .$TARGET_APP.bin $TARGET_APP
-          done
-
-          # Setup the wrapper script in the sdk toolchain dir simulating an external toolchain build
-          cp $OPENWRT_DIR/target/toolchain/files/wrapper.sh $GNU_TARGET_NAME-wrapper.sh
-          for app in cc gcc g++ c++ cpp ld as ; do
-            [ -f $GNU_TARGET_NAME-$app ] && mv $GNU_TARGET_NAME-$app $GNU_TARGET_NAME-$app.bin
-            ln -sf $GNU_TARGET_NAME-wrapper.sh $GNU_TARGET_NAME-$app
-          done
-
-      - name: Configure external toolchain with sdk
-        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk'
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_DEVEL=y >> .config
-          echo CONFIG_AUTOREMOVE=y >> .config
-          echo CONFIG_CCACHE=y >> .config
-
-          ./scripts/ext-toolchain.sh \
-            --toolchain ${{ env.TOOLCHAIN_FILE }}/staging_dir/toolchain-* \
-            --overwrite-config \
-            --config ${{ inputs.target }}/${{ inputs.subtarget }}
-
-      - name: Configure internal toolchain
-        if: inputs.build_toolchain == true || steps.parse-toolchain.outputs.toolchain-type == 'internal'
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_DEVEL=y >> .config
-          echo CONFIG_AUTOREMOVE=y >> .config
-          echo CONFIG_CCACHE=y >> .config
-
-          echo "CONFIG_TARGET_${{ inputs.target }}=y" >> .config
-          echo "CONFIG_TARGET_${{ inputs.target }}_${{ inputs.subtarget }}=y" >> .config
-
-          make defconfig
-
-      - name: Show configuration
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: ./scripts/diffconfig.sh
-
-      - name: Build tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Build toolchain
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make toolchain/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Build Kernel
-        if: inputs.build_kernel == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make target/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Build Kernel Kmods
-        if: inputs.build_kernel == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make package/linux/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Build everything
-        if: inputs.build_full == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Coverity prepare toolchain
-        if: inputs.coverity_check_packages != ''
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          wget -q https://scan.coverity.com/download/linux64 --post-data "token=${{ secrets.coverity_api_token }}&project=${{ inputs.coverity_project_name }}" -O coverity.tar.gz
-          wget -q https://scan.coverity.com/download/linux64 --post-data "token=${{ secrets.coverity_api_token }}&project=${{ inputs.coverity_project_name }}&md5=1" -O coverity.tar.gz.md5
-          echo ' coverity.tar.gz' >> coverity.tar.gz.md5
-          md5sum -c coverity.tar.gz.md5
-
-          mkdir cov-analysis-linux64
-          tar xzf coverity.tar.gz --strip 1 -C cov-analysis-linux64
-          export PATH=$(pwd)/cov-analysis-linux64/bin:$PATH
-
-          for template in ${{ inputs.coverity_compiler_template_list }}; do
-            cov-configure --template --comptype gcc --compiler "$template"
-          done
-
-      - name: Clean and recompile packages with Coverity toolchain
-        if: inputs.coverity_check_packages != ''
-        shell: su buildbot -c "bash {0}"
-        working-directory: openwrt
-        run: |
-          set -o pipefail -o errexit
-
-          coverity_check_packages=(${{ inputs.coverity_check_packages }})
-          printf -v clean_packages "package/%s/clean " "${coverity_check_packages[@]}"
-          make -j$(nproc) BUILD_LOG=1 $clean_packages || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-          coverity_force_compile_packages=(${{ inputs.coverity_force_compile_packages }})
-          printf -v force_compile_packages "package/%s/compile " "${coverity_force_compile_packages[@]}"
-          make -j$(nproc) BUILD_LOG=1 $force_compile_packages || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-          printf -v compile_packages "package/%s/compile " "${coverity_check_packages[@]}"
-          export PATH=$(pwd)/cov-analysis-linux64/bin:$PATH
-          cov-build --dir cov-int make -j $(nproc) BUILD_LOG=1 $compile_packages || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Upload build to Coverity for analysis
-        if: inputs.coverity_check_packages != ''
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          tar czf cov-int.tar.gz ./cov-int
-          curl \
-            --form token="${{ secrets.coverity_api_token }}" \
-            --form email="contact@openwrt.org" \
-            --form file=@cov-int.tar.gz \
-            --form version="${{ github.ref_name }}-${{ github.sha }}" \
-            --form description="OpenWrt ${{ github.ref_name }}-${{ github.sha }}" \
-            "https://scan.coverity.com/builds?project=${{ inputs.coverity_project_name }}"
-
-      - name: Upload logs
-        if: failure()
-        uses: actions/upload-artifact@v3
-        with:
-          name: ${{ inputs.target }}-${{ inputs.subtarget }}-logs
-          path: "openwrt/logs"

.github/workflows/check-kernel-patches.yml

@@ -1,155 +0,0 @@
-name: Refresh kernel for target
-
-on:
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      subtarget:
-        required: true
-        type: string
-      testing:
-        type: boolean
-      use_openwrt_container:
-        type: boolean
-        default: true
-
-permissions:
-  contents: read
-
-jobs:
-  setup_build:
-    name: Setup build
-    runs-on: ubuntu-latest
-    outputs:
-      owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
-      container_tag: ${{ steps.determine_tools_container.outputs.container_tag }}
-
-    steps:
-      - name: Set lower case owner name
-        id: lower_owner
-        run: |
-          OWNER_LC=$(echo "${{ github.repository_owner }}" \
-            | tr '[:upper:]' '[:lower:]')
-
-          if [ ${{ inputs.use_openwrt_container }} == "true" ]; then
-            OWNER_LC=openwrt
-          fi
-
-          echo "owner_lc=$OWNER_LC" >> $GITHUB_OUTPUT
-
-      # Per branch tools container tag
-      # By default stick to latest
-      # For official test targetting openwrt stable branch
-      # Get the branch or parse the tag and push dedicated tools containers
-      # For local test to use the correct container for stable release testing
-      # you need to use for the branch name a prefix of openwrt-[0-9][0-9].[0-9][0-9]-
-      - name: Determine tools container tag
-        id: determine_tools_container
-        run: |
-          CONTAINER_TAG=latest
-          if [ -n "${{ github.base_ref }}" ]; then
-            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              CONTAINER_TAG="${{ github.base_ref }}"
-            fi
-          elif [ ${{ github.ref_type }} == "branch" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
-              CONTAINER_TAG=${{ github.ref_name }}
-            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
-              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\)-.*/\1/')"
-            fi
-          elif [ ${{ github.ref_type }} == "tag" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
-              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/^v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
-            fi
-          fi
-          echo "Tools container to use tools:$CONTAINER_TAG"
-          echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
-
-  check-patch:
-    name: Check Kernel patches
-    needs: setup_build
-    runs-on: ubuntu-latest
-
-    container: ghcr.io/${{ needs.setup_build.outputs.owner_lc }}/tools:${{ needs.setup_build.outputs.container_tag }}
-
-    permissions:
-      contents: read
-      packages: read
-
-    steps:
-      - name: Checkout master directory
-        uses: actions/checkout@v3
-        with:
-          path: openwrt
-
-      - name: Fix permission
-        run: |
-          chown -R buildbot:buildbot openwrt
-
-      - name: Prepare prebuilt tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          mkdir -p staging_dir build_dir
-          ln -sf /prebuilt_tools/staging_dir/host staging_dir/host
-          ln -sf /prebuilt_tools/build_dir/host build_dir/host
-
-          ./scripts/ext-tools.sh --refresh
-
-      - name: Configure testing kernel
-        if: inputs.testing == true
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_TESTING_KERNEL=y >> .config
-
-      - name: Configure system
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          echo CONFIG_ALL_KMODS=y >> .config
-          echo CONFIG_DEVEL=y >> .config
-          echo CONFIG_AUTOREMOVE=y >> .config
-          echo CONFIG_CCACHE=y >> .config
-
-          echo "CONFIG_TARGET_${{ inputs.target }}=y" >> .config
-          echo "CONFIG_TARGET_${{ inputs.target }}_${{ inputs.subtarget }}=y" >> .config
-
-          make defconfig
-
-      - name: Build tools
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make tools/quilt/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Refresh Kernel patches
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: make target/linux/refresh V=s
-
-      - name: Validate Refreshed Kernel Patches
-        shell: su buildbot -c "sh -e {0}"
-        working-directory: openwrt
-        run: |
-          . .github/workflows/scripts/ci_helpers.sh
-
-          if git diff --name-only --exit-code; then
-            success "Kernel patches for ${{ inputs.target }}/${{ inputs.subtarget }} seems ok"
-          else
-            err "Kernel patches for ${{ inputs.target }}/${{ inputs.subtarget }} require refresh. (run 'make target/linux/refresh' and force push this pr)"
-            err "You can also check the provided artifacts with the refreshed patch from this CI run."
-            mkdir ${{ inputs.target }}-${{ inputs.subtarget }}-refreshed
-            for f in $(git diff --name-only); do
-              cp --parents $f ${{ inputs.target }}-${{ inputs.subtarget }}-refreshed/
-            done
-            exit 1
-          fi
-
-      - name: Upload Refreshed Patches
-        if: failure()
-        uses: actions/upload-artifact@v3
-        with:
-          name: ${{ inputs.target }}-${{ inputs.subtarget }}-refreshed
-          path: openwrt/${{ inputs.target }}-${{ inputs.subtarget }}-refreshed

.github/workflows/coverity.yml

@@ -15,51 +15,5 @@ jobs:
     permissions:
       contents: read
       packages: read
-    uses: ./.github/workflows/build.yml
-    with:
-      target: x86
-      subtarget: 64
-      build_full: true
-      include_feeds: true
-      coverity_compiler_template_list: >-
-        x86_64-openwrt-linux-gcc
-        x86_64-openwrt-linux-musl-gcc
-      #  qosify fails to build with cov-build
-      coverity_check_packages: >-
-        cgi-io
-        dnsmasq
-        dropbear
-        firewall
-        fstools
-        fwtool
-        iwinfo
-        jsonfilter
-        libnl-tiny
-        libubox
-        mtd
-        netifd
-        odhcp6c
-        odhcpd
-        opkg
-        procd
-        relayd
-        rpcd
-        swconfig
-        ubox
-        ubus
-        ucert
-        uci
-        uclient
-        ucode
-        ugps
-        uhttpd
-        umbim
-        umdns
-        unetd
-        uqmi
-        urngd
-        usbmode
-        usign
-        usteer
-        ustp
-        ustream-ssl
+      actions: write
+    uses: openwrt/actions-shared-workflows/.github/workflows/coverity.yml@main

.github/workflows/github-release.yml

@@ -0,0 +1,24 @@
+name: Create GitHub release
+
+permissions:
+  contents: write
+
+on:
+  push:
+    tags:
+      - "v*"
+  workflow_dispatch:
+
+jobs:
+  release:
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Release
+        uses: softprops/action-gh-release@v1
+        with:
+          draft: true
+          prerelease: true

.github/workflows/kernel.yml

@@ -17,6 +17,8 @@ on:
       - 'include/kernel*'
       - 'package/kernel/**'
       - 'target/linux/**'
+    branches-ignore:
+      - master
 
 permissions:
   contents: read
@@ -26,106 +28,15 @@ concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}
 
 jobs:
-  determine_targets:
-    name: Set targets
-    runs-on: ubuntu-latest
-    outputs:
-      targets_subtargets: ${{ steps.find_targets.outputs.targets_subtargets }}
-      targets: ${{ steps.find_targets.outputs.targets }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          fetch-depth: 2
-
-      - name: Get changed files
-        id: changed-files
-        uses: tj-actions/changed-files@v35
-
-      - name: Set targets
-        id: find_targets
-        run: |
-          ALL_TARGETS="$(perl ./scripts/dump-target-info.pl targets 2>/dev/null)"
-          CHANGED_FILES="$(echo ${{ steps.changed-files.outputs.all_changed_files }} | tr ' ' '\n')"
-
-          TARGETS_SUBTARGETS="$(echo "$ALL_TARGETS" | sort -u -t '/' -k1 | awk '{ print $1 }')"
-          TARGETS="$(echo "$ALL_TARGETS" | sort -u -t '/' -k1,1 | awk '{ print $1 }')"
-
-          # On testing non-specific target, skip testing each subtarget
-          if echo "$CHANGED_FILES" | grep -v -q target/linux ||
-            echo "$CHANGED_FILES" | grep -q target/linux/generic; then
-            TARGETS_SUBTARGETS=$TARGETS
-          fi
-
-          JSON_TARGETS_SUBTARGETS='['
-          FIRST=1
-          for TARGET in $TARGETS_SUBTARGETS; do
-            if echo "$CHANGED_FILES" | grep -v -q target/linux ||
-              echo "$CHANGED_FILES" | grep -q target/linux/generic ||
-              echo "$CHANGED_FILES" | grep -q $(echo $TARGET | cut -d "/" -f 1); then
-              TUPLE='{"target":"'"$(echo $TARGET | cut -d "/" -f 1)"'","subtarget":"'"$(echo $TARGET | cut -d "/" -f 2)"'"}'
-              [[ $FIRST -ne 1 ]] && JSON_TARGETS_SUBTARGETS="$JSON_TARGETS_SUBTARGETS"','
-              JSON_TARGETS_SUBTARGETS="$JSON_TARGETS_SUBTARGETS""$TUPLE"
-              FIRST=0
-            fi
-          done
-          JSON_TARGETS_SUBTARGETS="$JSON_TARGETS_SUBTARGETS"']'
-
-          JSON_TARGETS='['
-          FIRST=1
-          for TARGET in $TARGETS; do
-            if echo "$CHANGED_FILES" | grep -v -q target/linux ||
-              echo "$CHANGED_FILES" | grep -q target/linux/generic ||
-              echo "$CHANGED_FILES" | grep -q $(echo $TARGET | cut -d "/" -f 1); then
-              TUPLE='{"target":"'"$(echo $TARGET | cut -d "/" -f 1)"'","subtarget":"'"$(echo $TARGET | cut -d "/" -f 2)"'"}'
-              [[ $FIRST -ne 1 ]] && JSON_TARGETS="$JSON_TARGETS"','
-              JSON_TARGETS="$JSON_TARGETS""$TUPLE"
-              FIRST=0
-            fi
-          done
-          JSON_TARGETS="$JSON_TARGETS"']'
-
-          echo -e "\n---- targets to build ----\n"
-          echo "$JSON_TARGETS_SUBTARGETS"
-          echo -e "\n---- targets to build ----\n"
-
-          echo -e "\n---- targets to check patch ----\n"
-          echo "$JSON_TARGETS"
-          echo -e "\n---- targets to check patch ----\n"
-
-          echo "targets_subtargets=$JSON_TARGETS_SUBTARGETS" >> $GITHUB_OUTPUT
-          echo "targets=$JSON_TARGETS" >> $GITHUB_OUTPUT
-
-  build:
-    name: Build Kernel with external toolchain
-    needs: determine_targets
+  build-kernels:
+    name: Build all affected Kernels
     permissions:
       contents: read
       packages: read
-    strategy:
-       fail-fast: False
-       matrix:
-         include: ${{fromJson(needs.determine_targets.outputs.targets_subtargets)}}
-    uses: ./.github/workflows/build.yml
-    with:
-      target: ${{ matrix.target }}
-      subtarget: ${{ matrix.subtarget }}
-      build_kernel: true
-      build_all_kmods: true
-
-  check-kernel-patches:
-    name: Check Kernel patches
-    needs: determine_targets
-    permissions:
-      contents: read
-      packages: read
-    strategy:
-       fail-fast: False
-       matrix:
-         include: ${{fromJson(needs.determine_targets.outputs.targets)}}
-    uses: ./.github/workflows/check-kernel-patches.yml
-    with:
-      target: ${{ matrix.target }}
-      subtarget: ${{ matrix.subtarget }}
-
+      actions: write
+    secrets:
+      ccache_s3_endpoint: ${{ secrets.CCACHE_S3_ENDPOINT }}
+      ccache_s3_bucket: ${{ secrets.CCACHE_S3_BUCKET }}
+      ccache_s3_access_key: ${{ secrets.CCACHE_S3_ACCESS_KEY }}
+      ccache_s3_secret_key: ${{ secrets.CCACHE_S3_SECRET_KEY }}
+    uses: openwrt/actions-shared-workflows/.github/workflows/kernel.yml@main

.github/workflows/label-kernel.yml

@@ -7,44 +7,10 @@ on:
       - labeled
 
 jobs:
-  set_target:
-    if: startsWith(github.event.label.name, 'ci:kernel:')
-    name: Set target
-    runs-on: ubuntu-latest
-    outputs:
-      target: ${{ steps.set_target.outputs.target }}
-      subtarget: ${{ steps.set_target.outputs.subtarget }}
-
-    steps:
-      - name: Set target
-        id: set_target
-        env:
-          CI_EVENT_LABEL_NAME: ${{ github.event.label.name }}
-        run: |
-          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/target=\1/p' | tee --append $GITHUB_OUTPUT
-          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/subtarget=\2/p' | tee --append $GITHUB_OUTPUT
-
-  build_kernel:
-    name: Build Kernel with external toolchain
-    needs: set_target
+  build-kernels-label:
+    name: Build all affected Kernels from defined label
     permissions:
       contents: read
       packages: read
-    uses: ./.github/workflows/build.yml
-    with:
-      container_name: toolchain
-      target: ${{ needs.set_target.outputs.target }}
-      subtarget: ${{ needs.set_target.outputs.subtarget }}
-      build_kernel: true
-      build_all_kmods: true
-
-  check-kernel-patches:
-    name: Check Kernel patches
-    needs: set_target
-    permissions:
-      contents: read
-      packages: read
-    uses: ./.github/workflows/check-kernel-patches.yml
-    with:
-      target: ${{ needs.set_target.outputs.target }}
-      subtarget: ${{ needs.set_target.outputs.subtarget }}
+      actions: write
+    uses: openwrt/actions-shared-workflows/.github/workflows/label-kernel.yml@main

.github/workflows/label-target.yml

@@ -7,35 +7,10 @@ on:
       - labeled
 
 jobs:
-  set_target:
-    if: startsWith(github.event.label.name, 'ci:target:')
-    name: Set target
-    runs-on: ubuntu-latest
-    outputs:
-      target: ${{ steps.set_target.outputs.target }}
-      subtarget: ${{ steps.set_target.outputs.subtarget }}
-
-    steps:
-      - name: Set target
-        id: set_target
-        env:
-          CI_EVENT_LABEL_NAME: ${{ github.event.label.name }}
-        run: |
-          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/target=\1/p' | tee --append $GITHUB_OUTPUT
-          echo "$CI_EVENT_LABEL_NAME" | sed -n 's/.*:\(.*\):\(.*\)$/subtarget=\2/p' | tee --append $GITHUB_OUTPUT
-
-  build_target:
-    name: Build target
-    needs: set_target
+  build-target-label:
+    name: Build target from defined label
     permissions:
       contents: read
       packages: read
-    uses: ./.github/workflows/build.yml
-    with:
-      container_name: toolchain
-      target: ${{ needs.set_target.outputs.target }}
-      subtarget: ${{ needs.set_target.outputs.subtarget }}
-      build_full: true
-      build_all_kmods: true
-      build_all_boards: true
-      build_all_modules: true
+      actions: write
+    uses: openwrt/actions-shared-workflows/.github/workflows/label-target.yml@main

.github/workflows/packages.yml

@@ -3,7 +3,6 @@ name: Build all core packages
 on:
   pull_request:
     paths:
-      - '.github/workflows/build.yml'
       - '.github/workflows/packages.yml'
       - 'config/**'
       - 'include/**'
@@ -12,13 +11,14 @@ on:
       - 'toolchain/**'
   push:
     paths:
-      - '.github/workflows/build.yml'
       - '.github/workflows/packages.yml'
       - 'config/**'
       - 'include/**'
       - 'package/**'
       - 'target/linux/generic/**'
       - 'toolchain/**'
+    branches-ignore:
+      - master
 
 permissions:
   contents: read
@@ -28,25 +28,15 @@ concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}
 
 jobs:
-  build:
-    name: Build Packages with external toolchain
+  build-packages:
+    name: Build all core packages for selected target
     permissions:
       contents: read
       packages: read
-    strategy:
-      fail-fast: False
-      matrix:
-        include:
-          - target: malta
-            subtarget: be
-          - target: x86
-            subtarget: 64
-    uses: ./.github/workflows/build.yml
-    with:
-      target: ${{ matrix.target }}
-      subtarget: ${{ matrix.subtarget }}
-      build_kernel: true
-      build_all_kmods: true
-      build_all_modules: true
-      build_full: true
-
+      actions: write
+    secrets:
+      ccache_s3_endpoint: ${{ secrets.CCACHE_S3_ENDPOINT }}
+      ccache_s3_bucket: ${{ secrets.CCACHE_S3_BUCKET }}
+      ccache_s3_access_key: ${{ secrets.CCACHE_S3_ACCESS_KEY }}
+      ccache_s3_secret_key: ${{ secrets.CCACHE_S3_SECRET_KEY }}
+    uses: openwrt/actions-shared-workflows/.github/workflows/packages.yml@main

.github/workflows/push-containers.yml

@@ -6,9 +6,10 @@ on:
       - 'include/version.mk'
       - 'include/cmake.mk'
       - 'tools/**'
-      - '.github/workflows/build-tools.yml'
       - '.github/workflows/push-containers.yml'
-      - '.github/workflows/Dockerfile.tools'
+      - 'toolchain/**'
+    branches-ignore:
+      - master
 
 permissions:
   contents: read
@@ -18,81 +19,10 @@ concurrency:
   cancel-in-progress: true
 
 jobs:
-  build-linux-buildbot:
-    name: Build tools with buildbot container
-    if: ${{ github.repository_owner  == 'openwrt' }}
-    uses: ./.github/workflows/build-tools.yml
-    with:
-      generate_prebuilt_artifacts: true
-
-  push-tools-container:
-    needs: build-linux-buildbot
-    name: Push prebuilt tools container
-    if: ${{ github.repository_owner  == 'openwrt' }}
-    runs-on: ubuntu-latest
-
+  build-push-containers:
+    name: Build and Push all prebuilt containers
     permissions:
       contents: read
       packages: write
-
-    steps:
-      - name: Set lower case owner name
-        env:
-          OWNER: ${{ github.repository_owner }}
-        run: |
-          echo "OWNER_LC=${OWNER,,}" >> "$GITHUB_ENV"
-
-      # Per branch tools container tag
-      # By default stick to latest
-      # For official test targetting openwrt stable branch
-      # Get the branch or parse the tag and push dedicated tools containers
-      # Any branch that will match this pattern openwrt-[0-9][0-9].[0-9][0-9]
-      # will refresh the tools container with the matching tag.
-      # (example branch openwrt-22.03 -> tools:openwrt-22.03)
-      # (example branch openwrt-22.03-test -> tools:openwrt-22.03)
-      - name: Determine tools container tag
-        run: |
-          CONTAINER_TAG=latest
-
-          if [ ${{ github.ref_type }} == "branch" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E 'openwrt-[0-9][0-9]\.[0-9][0-9]'; then
-              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\).*/\1/')"
-            fi
-          elif [ ${{ github.ref_type }} == "tag" ]; then
-            if echo "${{ github.ref_name }}" | grep -q -E 'v[0-9][0-9]\.[0-9][0-9]\..+'; then
-              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
-            fi
-          fi
-
-          echo "Tools container to push tools:$CONTAINER_TAG"
-          echo "CONTAINER_TAG=$CONTAINER_TAG" >> "$GITHUB_ENV"
-
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          path: 'openwrt'
-
-      - name: Download prebuilt tools from build job
-        uses: actions/download-artifact@v3
-        with:
-          name: linux-buildbot-prebuilt-tools
-          path: openwrt
-
-      - name: Extract prebuild tools
-        working-directory: openwrt
-        run: tar -xf tools.tar
-
-      - name: Login to GitHub Container Registry
-        uses: docker/login-action@v2
-        with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Build and push
-        uses: docker/build-push-action@v3
-        with:
-          context: openwrt
-          push: true
-          tags: ghcr.io/${{ env.OWNER_LC }}/tools:${{ env.CONTAINER_TAG }}
-          file: openwrt/.github/workflows/Dockerfile.tools
+      actions: write
+    uses: openwrt/actions-shared-workflows/.github/workflows/push-containers.yml@main

.github/workflows/toolchain.yml

@@ -3,14 +3,14 @@ name: Build Toolchains
 on:
   pull_request:
     paths:
-      - '.github/workflows/build.yml'
       - '.github/workflows/toolchain.yml'
       - 'toolchain/**'
   push:
     paths:
-      - '.github/workflows/build.yml'
       - '.github/workflows/toolchain.yml'
       - 'toolchain/**'
+    branches-ignore:
+      - master
 
 permissions:
   contents: read
@@ -20,51 +20,10 @@ concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}
 
 jobs:
-  determine_targets:
-    name: Set targets
-    runs-on: ubuntu-latest
-    outputs:
-      target: ${{ steps.find_targets.outputs.target }}
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-
-      - name: Set targets
-        id: find_targets
-        run: |
-          export TARGETS="$(perl ./scripts/dump-target-info.pl targets 2>/dev/null \
-            | sort -u -t '/' -k1,1 \
-            | awk '{ print $1 }')"
-
-          JSON='['
-          FIRST=1
-          for TARGET in $TARGETS; do
-            TUPLE='{"target":"'"$(echo $TARGET | cut -d "/" -f 1)"'","subtarget":"'"$(echo $TARGET | cut -d "/" -f 2)"'"}'
-            [[ $FIRST -ne 1 ]] && JSON="$JSON"','
-            JSON="$JSON""$TUPLE"
-            FIRST=0
-          done
-          JSON="$JSON"']'
-
-           echo -e "\n---- targets ----\n"
-           echo "$JSON"
-           echo -e "\n---- targets ----\n"
-
-           echo "target=$JSON" >> $GITHUB_OUTPUT
-
-  build:
-    name: Build Target Toolchain
-    needs: determine_targets
+  build-toolchains:
+    name: Build Toolchains for each target
     permissions:
       contents: read
       packages: read
-    strategy:
-       fail-fast: False
-       matrix:
-         include: ${{fromJson(needs.determine_targets.outputs.target)}}
-    uses: ./.github/workflows/build.yml
-    with:
-      target: ${{ matrix.target }}
-      subtarget: ${{ matrix.subtarget }}
-      build_toolchain: true
+      actions: write
+    uses: openwrt/actions-shared-workflows/.github/workflows/toolchain.yml@main

.github/workflows/tools.yml

@@ -5,14 +5,14 @@ on:
     paths:
       - 'include/**'
       - 'tools/**'
-      - '.github/workflows/build-tools.yml'
       - '.github/workflows/tools.yml'
   push:
     paths:
       - 'include/**'
       - 'tools/**'
-      - '.github/workflows/build-tools.yml'
       - '.github/workflows/tools.yml'
+    branches-ignore:
+      - master
 
 permissions:
   contents: read
@@ -22,72 +22,6 @@ concurrency:
   cancel-in-progress: ${{ github.event_name == 'pull_request' }}
 
 jobs:
-  build-macos-latest:
-    name: Build tools with macos latest
-    runs-on: macos-latest
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-        with:
-          path: openwrt
-
-      - name: Setup MacOS
-        run: |
-          echo "WORKPATH=/Volumes/OpenWrt" >> "$GITHUB_ENV"
-          hdiutil create -size 20g -type SPARSE -fs "Case-sensitive HFS+" -volname OpenWrt OpenWrt.sparseimage
-          hdiutil attach OpenWrt.sparseimage
-          mv "$GITHUB_WORKSPACE/openwrt" /Volumes/OpenWrt/
-
-      - name: Install required prereq on MacOS
-        working-directory: ${{ env.WORKPATH }}/openwrt
-        run: |
-          brew install \
-            automake \
-            coreutils \
-            diffutils \
-            findutils \
-            gawk \
-            git-extras \
-            gnu-getopt \
-            gnu-sed \
-            grep \
-            make
-
-            echo "/bin" >> "$GITHUB_PATH"
-            echo "/sbin/Library/Apple/usr/bin" >> "$GITHUB_PATH"
-            echo "/usr/bin" >> "$GITHUB_PATH"
-            echo "/usr/local/bin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/coreutils/bin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/findutils/libexec/gnubin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/gettext/bin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/gnu-getopt/bin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/make/libexec/gnubin" >> "$GITHUB_PATH"
-            echo "/usr/local/opt/make/libexec/gnubin" >> "$GITHUB_PATH"
-            echo "/usr/sbin" >> "$GITHUB_PATH"
-
-      - name: Make prereq
-        working-directory: ${{ env.WORKPATH }}/openwrt
-        run: make defconfig
-
-      - name: Build tools MacOS
-        working-directory: ${{ env.WORKPATH }}/openwrt
-        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
-
-      - name: Upload logs
-        if: always()
-        uses: actions/upload-artifact@v3
-        with:
-          name: macos-latest-logs
-          path: ${{ env.WORKPATH }}/openwrt/logs
-
-      - name: Upload config
-        if: always()
-        uses: actions/upload-artifact@v3
-        with:
-          name: macos-latest-config
-          path: ${{ env.WORKPATH }}/openwrt/.config
-
-  build-linux-buildbot:
-    name: Build tools with buildbot container
-    uses: ./.github/workflows/build-tools.yml
+  build-tools:
+    name: Build host tools for linux and macos based systems
+    uses: openwrt/actions-shared-workflows/.github/workflows/tools.yml@main

Makefile

@@ -14,7 +14,7 @@ $(if $(findstring $(space),$(TOPDIR)),$(error ERROR: The path to the OpenWrt dir
 
 world:
 
-DISTRO_PKG_CONFIG:=$(shell $(TOPDIR)/scripts/command_all.sh pkg-config | grep '/usr' -m 1)
+DISTRO_PKG_CONFIG:=$(shell $(TOPDIR)/scripts/command_all.sh pkg-config | grep -e '/usr' -e '/nix/store' -m 1)
 
 export ORIG_PATH:=$(if $(ORIG_PATH),$(ORIG_PATH),$(PATH))
 export PATH:=$(if $(STAGING_DIR),$(abspath $(STAGING_DIR)/../host/bin),$(TOPDIR)/staging_dir/host/bin):$(PATH)

config/Config-build.in

@@ -26,6 +26,14 @@ menu "Global build settings"
 		  directory containing machine readable list of built profiles
 		  and resulting images.
 
+	config JSON_CYCLONEDX_SBOM
+		bool "Create CycloneDX SBOM JSON"
+		default BUILDBOT
+		help
+		  Create a JSON files *.bom.cdx.json in the build
+		  directory containing Software Bill Of Materials in CycloneDX
+		  format.
+
 	config ALL_NONSHARED
 		bool "Select all target specific packages by default"
 		select ALL_KMODS

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://git.openwrt.org/feed/packages.git^0da9f622975aa1e4efe452da4acbae15479bee63
-src-git luci https://git.openwrt.org/project/luci.git^257f54cb8bcd493d9be0a45a3c316668b793e8ae
-src-git routing https://git.openwrt.org/feed/routing.git^2272106e0839ee06957e88e3596489e1b510d3c2
-src-git telephony https://git.openwrt.org/feed/telephony.git^9746ae8f964e18f04b64fbe1956366954ff223f8
+src-git packages https://git.openwrt.org/feed/packages.git^063b2393cbc3e5aab9d2b40b2911cab1c3967c59
+src-git luci https://git.openwrt.org/project/luci.git^b07cf9dcfc37e021e5619a41c847e63afbd5d34a
+src-git routing https://git.openwrt.org/feed/routing.git^648753932d5a7deff7f2bdb33c000018a709ad84
+src-git telephony https://git.openwrt.org/feed/telephony.git^86af194d03592121f5321474ec9918dd109d3057

include/image-commands.mk

@@ -226,6 +226,11 @@ define Build/copy-file
 	cat "$(1)" > "$@"
 endef
 
+define Build/dlink-sge-image
+	$(STAGING_DIR_HOST)/bin/dlink-sge-image $(1) $@ $@.enc
+	mv $@.enc $@
+endef
+
 define Build/edimax-header
 	$(STAGING_DIR_HOST)/bin/mkedimaximg -i $@ -o $@.new $(1)
 	@mv $@.new $@

include/image.mk

@@ -40,8 +40,10 @@ IMG_PREFIX_VERCODE:=$(if $(CONFIG_VERSION_CODE_FILENAMES),$(call sanitize,$(VERS
 IMG_PREFIX:=$(VERSION_DIST_SANITIZED)-$(IMG_PREFIX_VERNUM)$(IMG_PREFIX_VERCODE)$(IMG_PREFIX_EXTRA)$(BOARD)$(if $(SUBTARGET),-$(SUBTARGET))
 IMG_ROOTFS:=$(IMG_PREFIX)-rootfs
 IMG_COMBINED:=$(IMG_PREFIX)-combined
+ifeq ($(DUMP),)
 IMG_PART_SIGNATURE:=$(shell echo $(SOURCE_DATE_EPOCH)$(LINUX_VERMAGIC) | $(MKHASH) md5 | cut -b1-8)
 IMG_PART_DISKGUID:=$(shell echo $(SOURCE_DATE_EPOCH)$(LINUX_VERMAGIC) | $(MKHASH) md5 | sed -E 's/(.{8})(.{4})(.{4})(.{4})(.{10})../\1-\2-\3-\4-\500/')
+endif
 
 MKFS_DEVTABLE_OPT := -D $(INCLUDE_DIR)/device_table.txt
 
@@ -167,7 +169,9 @@ define Image/pad-to
 	mv $(1).new $(1)
 endef
 
+ifeq ($(DUMP),)
 ROOTFS_PARTSIZE=$(shell echo $$(($(CONFIG_TARGET_ROOTFS_PARTSIZE)*1024*1024)))
+endif
 
 define Image/pad-root-squashfs
 	$(call Image/pad-to,$(KDIR)/root.squashfs,$(if $(1),$(1),$(ROOTFS_PARTSIZE)))
@@ -277,6 +281,13 @@ endef
 define Image/Manifest
 	$(call opkg,$(TARGET_DIR_ORIG)) list-installed > \
 		$(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),-$(PROFILE_SANITIZED)).manifest
+ifndef IB
+	$(if $(CONFIG_JSON_CYCLONEDX_SBOM), \
+		$(SCRIPT_DIR)/package-metadata.pl imgcyclonedxsbom \
+		$(TMP_DIR)/.packageinfo \
+		$(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),-$(PROFILE_SANITIZED)).manifest > \
+		$(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),-$(PROFILE_SANITIZED)).bom.cdx.json)
+endif
 endef
 
 define Image/gzip-ext4-padded-squashfs
@@ -564,7 +575,7 @@ define Device/Build/dtb
   $(KDIR)/image-$(1).dtb: FORCE
 	$(call Image/BuildDTB,$(strip $(2))/$(strip $(3)).dts,$$@)
 
-  image_prepare: $(KDIR)/image-$(1).dtb
+  compile-dtb: $(KDIR)/image-$(1).dtb
   endif
 
 endef
@@ -575,7 +586,7 @@ define Device/Build/dtbo
   $(KDIR)/image-$(1).dtbo: FORCE
 	$(call Image/BuildDTBO,$(strip $(2))/$(strip $(3)).dtso,$$@)
 
-  image_prepare: $(KDIR)/image-$(1).dtbo
+  compile-dtb: $(KDIR)/image-$(1).dtbo
   endif
 
 endef
@@ -812,18 +823,20 @@ define BuildImage
   download:
   prepare:
   compile:
+  compile-dtb:
   clean:
   image_prepare:
 
   ifeq ($(IB),)
-    .PHONY: download prepare compile clean image_prepare kernel_prepare install install-images
+    .PHONY: download prepare compile compile-dtb clean image_prepare kernel_prepare install install-images
     compile:
 		$(call Build/Compile)
 
     clean:
 		$(call Build/Clean)
 
-    image_prepare: compile
+    compile-dtb:
+    image_prepare: compile compile-dtb
 		mkdir -p $(BIN_DIR) $(KDIR)/tmp
 		rm -rf $(BUILD_DIR)/json_info_files
 		$(call Image/Prepare)

include/kernel-5.15

@@ -1,2 +1,2 @@
-LINUX_VERSION-5.15 = .134
-LINUX_KERNEL_HASH-5.15.134 = f37182aecb57ed6853d01e1074d3a60a653331e35f3115728381e08be050b9d3
+LINUX_VERSION-5.15 = .150
+LINUX_KERNEL_HASH-5.15.150 = ee05592b458e7fcdc515b43605883a10cc2f65f2e2b58d60af8a72b93467e4d4

include/kernel-build.mk

@@ -156,6 +156,10 @@ define BuildKernel
   compile: $(LINUX_DIR)/.modules
 	$(MAKE) -C image compile TARGET_BUILD=
 
+  dtb: $(STAMP_CONFIGURED)
+	$(_SINGLE)$(KERNEL_MAKE) scripts_dtc
+	$(MAKE) -C image compile-dtb TARGET_BUILD=
+
   oldconfig menuconfig nconfig xconfig: $(STAMP_PREPARED) $(STAMP_CHECKED) FORCE
 	rm -f $(LINUX_DIR)/.config.prev
 	rm -f $(STAMP_CONFIGURED)

include/kernel-defaults.mk

@@ -166,7 +166,7 @@ define Kernel/CompileImage/Initramfs
 	$(if $(SOURCE_DATE_EPOCH),touch -hcd "@$(SOURCE_DATE_EPOCH)" $(TARGET_DIR) $(TARGET_DIR)/init)
 	rm -rf $(KERNEL_BUILD_DIR)/linux-$(LINUX_VERSION)/usr/initramfs_data.cpio*
 ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE),y)
-ifneq ($(qstrip $(CONFIG_EXTERNAL_CPIO)),)
+ifneq ($(call qstrip,$(CONFIG_EXTERNAL_CPIO)),)
 	$(CP) $(CONFIG_EXTERNAL_CPIO) $(KERNEL_BUILD_DIR)/initrd.cpio
 else
 	( cd $(TARGET_DIR); find . | LC_ALL=C sort | $(STAGING_DIR_HOST)/bin/cpio --reproducible -o -H newc -R 0:0 > $(KERNEL_BUILD_DIR)/initrd.cpio )

include/package-dumpinfo.mk

@@ -36,6 +36,8 @@ $(if $(USERID),Require-User: $(USERID)
 )Source: $(PKG_SOURCE)
 $(if $(LICENSE),License: $(LICENSE)
 )$(if $(LICENSE_FILES),LicenseFiles: $(LICENSE_FILES)
+)$(if $(PKG_CPE_ID),CPE-ID: $(PKG_CPE_ID)
+)$(if $(ABI_VERSION),ABI-Version: $(ABI_VERSION)
 )Type: $(if $(Package/$(1)/targets),$(Package/$(1)/targets),$(if $(PKG_TARGETS),$(PKG_TARGETS),ipkg))
 $(if $(KCONFIG),Kernel-Config: $(KCONFIG)
 )$(if $(BUILDONLY),Build-Only: $(BUILDONLY)

include/prereq.mk

@@ -107,16 +107,9 @@ define SetupHostCommand
 			bin="$$$$$$$$(command -v "$$$$$$$${cmd%% *}")"; \
 			if [ -x "$$$$$$$$bin" ] && eval "$$$$$$$$cmd" >/dev/null 2>/dev/null; then \
 				case "$$$$$$$$(ls -dl -- $(STAGING_DIR_HOST)/bin/$(strip $(1)))" in \
-					*" -> $$$$$$$$bin"*) \
-						[ -x "$(STAGING_DIR_HOST)/bin/$(strip $(1))" ] && exit 0 \
-						;; \
-					"-"*) \
-						find "$(STAGING_DIR_HOST)/stamp" | grep $(strip $(1)) && \
-						[ -x "$(STAGING_DIR_HOST)/bin/$(strip $(1))" ] && exit 0 \
-						;; \
-					*" -> /"*) \
-						;; \
-					*" -> "*) \
+					"-"* | \
+					*" -> $$$$$$$$bin"* | \
+					*" -> "[!/]*) \
 						[ -x "$(STAGING_DIR_HOST)/bin/$(strip $(1))" ] && exit 0 \
 						;; \
 				esac; \

include/scan.mk

@@ -50,7 +50,8 @@ define PackageDir
 		$$(call progress,Collecting $(SCAN_NAME) info: $(SCAN_DIR)/$(2)) \
 		echo Source-Makefile: $(SCAN_DIR)/$(2)/Makefile; \
 		$(if $(3),echo Override: $(3),true); \
-		$(NO_TRACE_MAKE) --no-print-dir -r DUMP=1 FEED="$(call feedname,$(2))" -C $(SCAN_DIR)/$(2) $(SCAN_MAKEOPTS) 2>/dev/null || { \
+		$(if $(findstring c,$(OPENWRT_VERBOSE)),$(MAKE),$(NO_TRACE_MAKE) --no-print-dir) -r DUMP=1 FEED="$(call feedname,$(2))" -C $(SCAN_DIR)/$(2) $(SCAN_MAKEOPTS) \
+			$(if $(findstring c,$(OPENWRT_VERBOSE)),,2>/dev/null) || { \
 			mkdir -p "$(TOPDIR)/logs/$(SCAN_DIR)/$(2)"; \
 			$(NO_TRACE_MAKE) --no-print-dir -r DUMP=1 FEED="$(call feedname,$(2))" -C $(SCAN_DIR)/$(2) $(SCAN_MAKEOPTS) > $(TOPDIR)/logs/$(SCAN_DIR)/$(2)/dump.txt 2>&1; \
 			$$(call progress,ERROR: please fix $(SCAN_DIR)/$(2)/Makefile - see logs/$(SCAN_DIR)/$(2)/dump.txt for details\n) \

include/subdir.mk

@@ -5,6 +5,9 @@
 ifeq ($(MAKECMDGOALS),prereq)
   SUBTARGETS:=prereq
   PREREQ_ONLY:=1
+# For target/linux related target add dtb to selectively compile dtbs
+else ifneq ($(filter target/linux/%,$(MAKECMDGOALS)),)
+  SUBTARGETS:=$(DEFAULT_SUBDIR_TARGETS) dtb
 else
   SUBTARGETS:=$(DEFAULT_SUBDIR_TARGETS)
 endif

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),23.05.0)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),23.05.3)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r23497-6637af95aa)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r23809-234f1a2efa)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/23.05.0)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/23.05.3)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/Makefile

@@ -59,6 +59,7 @@ $(curdir)/merge-index: $(curdir)/merge
 	(cd $(PACKAGE_DIR_ALL) && $(SCRIPT_DIR)/ipkg-make-index.sh . 2>&1 > Packages; )
 
 ifndef SDK
+  $(curdir)//compile = $(STAGING_DIR)/.prepared $(BIN_DIR)
   $(curdir)/compile: $(curdir)/system/opkg/host/compile
 endif
 
@@ -106,6 +107,14 @@ ifdef CONFIG_SIGNED_PACKAGES
 		$(STAGING_DIR_HOST)/bin/usign -S -m Packages -s $(BUILD_KEY); \
 	); done
 endif
+ifdef CONFIG_JSON_CYCLONEDX_SBOM
+	@echo Creating CycloneDX package SBOMs...
+	@for d in $(PACKAGE_SUBDIRS); do ( \
+		[ -d $$d ] && \
+			cd $$d || continue; \
+		$(SCRIPT_DIR)/package-metadata.pl pkgcyclonedxsbom Packages.manifest > Packages.bom.cdx.json || true; \
+	); done
+endif
 
 $(curdir)/flags-install:= -j1
 

package/base-files/files/lib/functions.sh

@@ -262,11 +262,6 @@ default_postinst() {
 
 	add_group_and_user "${pkgname}"
 
-	if [ -f "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" ]; then
-		( . "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" )
-		ret=$?
-	fi
-
 	if [ -d "$root/rootfs-overlay" ]; then
 		cp -R $root/rootfs-overlay/. $root/
 		rm -fR $root/rootfs-overlay/
@@ -292,6 +287,11 @@ default_postinst() {
 		rm -f /tmp/luci-indexcache
 	fi
 
+	if [ -f "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" ]; then
+		( . "$root/usr/lib/opkg/info/${pkgname}.postinst-pkg" )
+		ret=$?
+	fi
+
 	local shell="$(command -v bash)"
 	for i in $(grep -s "^/etc/init.d/" "$root$filelist"); do
 		if [ -n "$root" ]; then

package/base-files/files/lib/functions/leds.sh

@@ -11,6 +11,36 @@ get_dt_led_path() {
 	echo "$ledpath"
 }
 
+get_dt_led_color_func() {
+	local enum
+	local func
+	local idx
+	local label
+
+	[ -e "$1/function" ] && func=$(cat "$1/function")
+	[ -e "$1/color" ] && idx=$((0x$(hexdump -n 4 -e '4/1 "%02x"' "$1/color")))
+	[ -e "$1/function-enumerator" ] && \
+		enum=$((0x$(hexdump -n 4 -e '4/1 "%02x"' "$1/function-enumerator")))
+
+	[ -z "$idx" ] && [ -z "$func" ] && return 2
+
+	if [ -n "$idx" ]; then
+		for color in "white" "red" "green" "blue" "amber" \
+			     "violet" "yellow" "ir" "multicolor" "rgb" \
+			     "purple" "orange" "pink" "cyan" "lime"
+		do
+			[ $idx -eq 0 ] && label="$color" && break
+			idx=$((idx-1))
+		done
+	fi
+
+	label="$label:$func"
+	[ -n "$enum" ] && label="$label-$enum"
+	echo "$label"
+
+	return 0
+}
+
 get_dt_led() {
 	local label
 	local ledpath=$(get_dt_led_path $1)
@@ -18,6 +48,7 @@ get_dt_led() {
 	[ -n "$ledpath" ] && \
 		label=$(cat "$ledpath/label" 2>/dev/null) || \
 		label=$(cat "$ledpath/chan-name" 2>/dev/null) || \
+		label=$(get_dt_led_color_func "$ledpath") || \
 		label=$(basename "$ledpath")
 
 	echo "$label"

package/base-files/files/lib/functions/uci-defaults.sh

@@ -107,7 +107,7 @@ ucidef_set_bridge_mac() {
 }
 
 ucidef_set_network_device_mac() {
-	json_select_object "network-device"
+	json_select_object "network_device"
 	json_select_object "${1}"
 	json_add_string macaddr "${2}"
 	json_select ..

package/base-files/image-config.in

@@ -190,7 +190,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/releases/23.05.0"
+		default "https://downloads.openwrt.org/releases/23.05.3"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/arm-trusted-firmware-mediatek/Makefile

@@ -94,6 +94,22 @@ define Trusted-Firmware-A/mt7622-sdmmc-2ddr
   DDR3_FLYBY:=1
 endef
 
+define Trusted-Firmware-A/mt7981-emmc-ddr4
+  NAME:=MediaTek MT7981 (eMMC, DDR4)
+  BOOT_DEVICE:=emmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+endef
+
+define Trusted-Firmware-A/mt7981-spim-nand-ddr4
+  NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR4)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr4
+endef
+
 define Trusted-Firmware-A/mt7981-nor-ddr3
   NAME:=MediaTek MT7981 (SPI-NOR, DDR3)
   BOOT_DEVICE:=nor
@@ -118,7 +134,7 @@ define Trusted-Firmware-A/mt7981-sdmmc-ddr3
   DDR_TYPE:=ddr3
 endef
 
-define Trusted-Firmware-A/mt7986-snand-ddr3
+define Trusted-Firmware-A/mt7981-snand-ddr3
   NAME:=MediaTek MT7981 (SPI-NAND via SNFI, DDR3)
   BOOT_DEVICE:=snand
   BUILD_SUBTARGET:=filogic
@@ -175,6 +191,15 @@ define Trusted-Firmware-A/mt7986-spim-nand-ddr4
   NAND_TYPE:=spim:2k+64
 endef
 
+define Trusted-Firmware-A/mt7986-spim-nand-4k-ddr4
+  NAME:=MediaTek MT7986 (SPI-NAND via SPIM, DDR4)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7986
+  DDR_TYPE:=ddr4
+  NAND_TYPE:=spim:4k+256
+endef
+
 define Trusted-Firmware-A/mt7986-nor-ddr3
   NAME:=MediaTek MT7986 (SPI-NOR, DDR3)
   BOOT_DEVICE:=nor
@@ -347,8 +372,10 @@ TFA_TARGETS:= \
 	mt7981-emmc-ddr3 \
 	mt7981-nor-ddr3 \
 	mt7981-sdmmc-ddr3 \
-	mt7986-snand-ddr3 \
+	mt7981-snand-ddr3 \
 	mt7981-spim-nand-ddr3 \
+	mt7981-emmc-ddr4 \
+	mt7981-spim-nand-ddr4 \
 	mt7986-emmc-ddr3 \
 	mt7986-nor-ddr3 \
 	mt7986-sdmmc-ddr3 \
@@ -359,6 +386,7 @@ TFA_TARGETS:= \
 	mt7986-sdmmc-ddr4 \
 	mt7986-snand-ddr4 \
 	mt7986-spim-nand-ddr4 \
+	mt7986-spim-nand-4k-ddr4 \
 	mt7988-emmc-ddr3 \
 	mt7988-nor-ddr3 \
 	mt7988-sdmmc-ddr3 \

package/boot/uboot-envtools/files/mediatek_filogic

@@ -12,6 +12,9 @@ touch /etc/config/ubootenv
 board=$(board_name)
 
 case "$board" in
+asus,rt-ax59u)
+	ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
+	;;
 bananapi,bpi-r3)
 	rootdev="$(cmdline_get_var root)"
 	rootdev="${rootdev##*/}"
@@ -37,16 +40,43 @@ bananapi,bpi-r3)
 		;;
 	esac
 	;;
+cmcc,rax3000m)
+	case "$(cmdline_get_var root)" in
+	/dev/mmc*)
+		local envdev=$(find_mmc_part "ubootenv" "mmcblk0")
+		ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1"
+		ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1"
+		;;
+	*)
+		. /lib/upgrade/nand.sh
+		local envubi=$(nand_find_ubi ubi)
+		local envdev=/dev/$(nand_find_volume $envubi ubootenv)
+		local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
+		ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x1f000" "1"
+		ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x1f000" "1"
+		;;
+	esac
+	;;
 glinet,gl-mt3000)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
 	;;
-mercusys,mr90x-v1)
+glinet,gl-mt6000)
+	local envdev=$(find_mmc_part "u-boot-env")
+	ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
+	;;
+mercusys,mr90x-v1|\
+routerich,ax3000)
 	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
 	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
 	;;
-netgear,wax220)
+cetron,ct3003|\
+netgear,wax220|\
+zbtlink,zbt-z8102ax)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;
+ubnt,unifi-6-plus)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
+	;;
 xiaomi,mi-router-wr30u-112m-nmbm|\
 xiaomi,mi-router-wr30u-stock|\
 xiaomi,redmi-router-ax6000-stock)
@@ -54,6 +84,7 @@ xiaomi,redmi-router-ax6000-stock)
 	ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
 	;;
 h3c,magic-nx30-pro|\
+jcg,q30-pro|\
 qihoo,360t7|\
 tplink,tl-xdr4288|\
 tplink,tl-xdr6086|\
@@ -71,6 +102,17 @@ zyxel,ex5601-t0)
 	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
 	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x40000" "2"
 	;;
+zyxel,ex5601-t0-ubootmod)
+        . /lib/upgrade/nand.sh
+        local envubi=$(nand_find_ubi ubi)
+        local envdev=/dev/$(nand_find_volume $envubi ubootenv)
+        local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
+        ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x20000" "1"
+        ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x20000" "1"
+        ;;
+zyxel,ex5700-telenor)
+	ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1"
+	;;
 esac
 
 config_load ubootenv

package/boot/uboot-envtools/files/ramips

@@ -20,6 +20,7 @@ alfa-network,tube-e4g|\
 engenius,epg600|\
 engenius,esr600h|\
 linksys,re7000|\
+meig,slt866|\
 sitecom,wlr-4100-v1-002|\
 zyxel,keenetic-lite-iii-a)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x1000"
@@ -42,6 +43,7 @@ beeline,smartbox-giga|\
 beeline,smartbox-turbo|\
 beeline,smartbox-turbo-plus|\
 etisalat,s3|\
+rostelecom,rt-fe-1a|\
 rostelecom,rt-sf-1)
 	ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000"
 	;;

package/boot/uboot-mediatek/Makefile

@@ -200,6 +200,30 @@ define U-Boot/mt7629_rfb
   UBOOT_CONFIG:=mt7629_rfb
 endef
 
+define U-Boot/mt7981_cmcc_rax3000m-emmc
+  NAME:=CMCC RAX3000M
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=cmcc_rax3000m
+  UBOOT_CONFIG:=mt7981_cmcc_rax3000m-emmc
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr4
+endef
+
+define U-Boot/mt7981_cmcc_rax3000m-nand
+  NAME:=CMCC RAX3000M
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=cmcc_rax3000m
+  UBOOT_CONFIG:=mt7981_cmcc_rax3000m-nand
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr4
+endef
+
 define U-Boot/mt7981_h3c_magic-nx30-pro
   NAME:=H3C Magic NX30 Pro
   BUILD_SUBTARGET:=filogic
@@ -212,6 +236,78 @@ define U-Boot/mt7981_h3c_magic-nx30-pro
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
 endef
 
+define U-Boot/mt7981_jcg_q30-pro
+  NAME:=JCG Q30 PRO
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=jcg_q30-pro
+  UBOOT_CONFIG:=mt7981_jcg_q30-pro
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
+define U-Boot/mt7981_rfb-spim-nand
+  NAME:=MT7981 Reference Board
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mediatek_mt7981-rfb
+  UBOOT_CONFIG:=mt7981_rfb
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
+endef
+
+define U-Boot/mt7981_rfb-emmc
+  NAME:=MT7981 Reference Board
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mediatek_mt7981-rfb
+  UBOOT_CONFIG:=mt7981_emmc_rfb
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr3
+endef
+
+define U-Boot/mt7981_rfb-nor
+  NAME:=MT7981 Reference Board
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mediatek_mt7981-rfb
+  UBOOT_CONFIG:=mt7981_nor_rfb
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-nor-ddr3
+endef
+
+define U-Boot/mt7981_rfb-sd
+  NAME:=MT7981 Reference Board
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mediatek_mt7981-rfb
+  UBOOT_CONFIG:=mt7981_sd_rfb
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=sdmmc
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-sdmmc-ddr3
+endef
+
+define U-Boot/mt7981_rfb-snfi
+  NAME:=MT7981 Reference Board
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=mediatek_mt7981-rfb
+  UBOOT_CONFIG:=mt7981_snfi_nand_rfb
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=snand
+  BL2_SOC:=mt7981
+  BL2_DDRTYPE:=ddr3
+  DEPENDS:=+trusted-firmware-a-mt7981-snand-ddr3
+endef
+
 define U-Boot/mt7981_qihoo_360t7
   NAME:=Qihoo 360T7
   BUILD_SUBTARGET:=filogic
@@ -297,6 +393,18 @@ define U-Boot/mt7986_bananapi_bpi-r3-nor
   FIP_COMPRESS:=1
 endef
 
+define U-Boot/mt7986_glinet_gl-mt6000
+  NAME:=GL.iNet GL-MT6000
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=glinet_gl-mt6000
+  UBOOT_CONFIG:=mt7986a_glinet_gl-mt6000
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=emmc
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
+endef
+
 define U-Boot/mt7986_tplink_tl-xdr4288
   NAME:=TP-LINK TL-XDR4288
   BUILD_SUBTARGET:=filogic
@@ -345,6 +453,18 @@ define U-Boot/mt7986_xiaomi_redmi-router-ax6000
   DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr4
 endef
 
+define U-Boot/mt7986_zyxel_ex5601-t0
+  NAME:=Zyxel EX5601-T0
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=zyxel_ex5601-t0-ubootmod
+  UBOOT_CONFIG:=mt7986_zyxel_ex5601-t0
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=spim-nand-4k
+  BL2_SOC:=mt7986
+  BL2_DDRTYPE:=ddr4
+  DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-4k-ddr4
+endef
+
 define U-Boot/mt7988_rfb-spim-nand
   NAME:=MT7988 Reference Board
   BUILD_SUBTARGET:=filogic
@@ -424,17 +544,27 @@ UBOOT_TARGETS := \
 	mt7628_rfb \
 	ravpower_rp-wd009 \
 	mt7629_rfb \
+	mt7981_cmcc_rax3000m-emmc \
+	mt7981_cmcc_rax3000m-nand \
 	mt7981_h3c_magic-nx30-pro \
+	mt7981_jcg_q30-pro \
+	mt7981_rfb-spim-nand \
+	mt7981_rfb-emmc \
+	mt7981_rfb-nor \
+	mt7981_rfb-sd \
+	mt7981_rfb-snfi \
 	mt7981_qihoo_360t7 \
 	mt7981_xiaomi_mi-router-wr30u \
 	mt7986_bananapi_bpi-r3-emmc \
 	mt7986_bananapi_bpi-r3-sdmmc \
 	mt7986_bananapi_bpi-r3-snand \
 	mt7986_bananapi_bpi-r3-nor \
+	mt7986_glinet_gl-mt6000 \
 	mt7986_tplink_tl-xdr4288 \
 	mt7986_tplink_tl-xdr6086 \
 	mt7986_tplink_tl-xdr6088 \
 	mt7986_xiaomi_redmi-router-ax6000 \
+	mt7986_zyxel_ex5601-t0 \
 	mt7986_rfb \
 	mt7988_rfb-spim-nand \
 	mt7988_rfb-snand \

package/boot/uboot-mediatek/patches/106-configs-sync-mt7981-rfb-storage.patch

@@ -0,0 +1,129 @@
+--- a/configs/mt7981_rfb_defconfig
++++ b/configs/mt7981_rfb_defconfig
+@@ -30,6 +30,9 @@ CONFIG_CMD_MTD=y
+ CONFIG_CMD_SF_TEST=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
+ CONFIG_REGMAP=y
+--- a/configs/mt7981_snfi_nand_rfb_defconfig
++++ b/configs/mt7981_snfi_nand_rfb_defconfig
+@@ -1,11 +1,12 @@
+ CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+ CONFIG_POSITION_INDEPENDENT=y
+ CONFIG_ARCH_MEDIATEK=y
+ CONFIG_TEXT_BASE=0x41e00000
+ CONFIG_SYS_MALLOC_F_LEN=0x4000
+ CONFIG_NR_DRAM_BANKS=1
+-CONFIG_ENV_SIZE=0x20000
+ CONFIG_DEFAULT_DEVICE_TREE="mt7981-snfi-nand-rfb"
++CONFIG_SYS_PROMPT="MT7981> "
+ CONFIG_TARGET_MT7981=y
+ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+@@ -15,7 +16,6 @@ CONFIG_DEBUG_UART=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-snfi-nand-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+-CONFIG_SYS_PROMPT="MT7981> "
+ CONFIG_SYS_CBSIZE=512
+ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_NETBSD is not set
+@@ -29,8 +29,6 @@ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MTD=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_SMC=y
+-CONFIG_MTDIDS_DEFAULT="spi-nand0=spi-nand0"
+-CONFIG_MTDPARTS_DEFAULT="spi-nand0:1024k(bl2),512k(u-boot-env),2048k(factory),2048k(fip),65536k(ubi)"
+ CONFIG_CMD_UBI=y
+ CONFIG_CMD_UBI_RENAME=y
+ CONFIG_ENV_OVERWRITE=y
+@@ -45,7 +43,6 @@ CONFIG_DM_MTD=y
+ CONFIG_MTK_SPI_NAND=y
+ CONFIG_MTK_SPI_NAND_MTD=y
+ CONFIG_PHY_FIXED=y
+-CONFIG_DM_ETH=y
+ CONFIG_MEDIATEK_ETH=y
+ CONFIG_PINCTRL=y
+ CONFIG_PINCONF=y
+@@ -55,3 +52,4 @@ CONFIG_MTK_POWER_DOMAIN=y
+ CONFIG_DM_SERIAL=y
+ CONFIG_MTK_SERIAL=y
+ CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/configs/mt7981_nor_rfb_defconfig
+@@ -0,0 +1,68 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-rfb"
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_TARGET_MT7981=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++# CONFIG_AUTOBOOT is not set
++CONFIG_DEFAULT_FDT_FILE="mt7981-rfb"
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_CBSIZE=512
++CONFIG_SYS_PBSIZE=1049
++# CONFIG_BOOTM_NETBSD is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_CMD_ELF is not set
++# CONFIG_CMD_UNLZ4 is not set
++# CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_SMC=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_SPI_FLASH_SFDP_SUPPORT=y
++CONFIG_SPI_FLASH_EON=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_ISSI=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XMC=y
++CONFIG_SPI_FLASH_XTX=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64

package/boot/uboot-mediatek/patches/107-configs-add-useful-options-to-mt7981-rfb.patch

@@ -0,0 +1,474 @@
+--- a/configs/mt7981_emmc_rfb_defconfig
++++ b/configs/mt7981_emmc_rfb_defconfig
+@@ -14,7 +14,22 @@ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+ CONFIG_SYS_LOAD_ADDR=0x46000000
+ CONFIG_DEBUG_UART=y
+-# CONFIG_AUTOBOOT is not set
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_MMC_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-emmc-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+@@ -24,9 +39,23 @@ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_PLAN9 is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+-# CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_UNLZ4 is not set
+ # CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_UUID=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_GPT=y
+ CONFIG_CMD_GPT_RENAME=y
+@@ -36,13 +65,35 @@ CONFIG_CMD_PART=y
+ CONFIG_CMD_READ=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
+ CONFIG_CMD_FAT=y
+ CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
+ CONFIG_PARTITION_TYPE_GUID=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_IS_IN_MMC=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGEX=y
+ CONFIG_REGMAP=y
+ CONFIG_SYSCON=y
+ CONFIG_CLK=y
+--- a/configs/mt7981_rfb_defconfig
++++ b/configs/mt7981_rfb_defconfig
+@@ -12,7 +12,23 @@ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+ CONFIG_SYS_LOAD_ADDR=0x46000000
+ CONFIG_DEBUG_UART=y
+-# CONFIG_AUTOBOOT is not set
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SPI_BOOT=y
++CONFIG_NAND_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+@@ -22,23 +38,74 @@ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_PLAN9 is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+-# CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_UNLZ4 is not set
+ # CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MTD=y
+-CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++# CONFIG_MTD_RAW_NAND is not set
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
+ CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
+ CONFIG_CMD_SMC=y
+ CONFIG_CMD_UBI=y
+ CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGEX=y
+ CONFIG_REGMAP=y
+ CONFIG_SYSCON=y
+ CONFIG_CLK=y
+ # CONFIG_MMC is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_MTD=y
+ CONFIG_DM_MTD=y
+ CONFIG_MTD_SPI_NAND=y
+--- a/configs/mt7981_sd_rfb_defconfig
++++ b/configs/mt7981_sd_rfb_defconfig
+@@ -14,7 +14,22 @@ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+ CONFIG_SYS_LOAD_ADDR=0x46000000
+ CONFIG_DEBUG_UART=y
+-# CONFIG_AUTOBOOT is not set
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_MMC_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-sd-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+@@ -24,9 +39,23 @@ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_PLAN9 is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+-# CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_UNLZ4 is not set
+ # CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_UUID=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_GPT=y
+ CONFIG_CMD_GPT_RENAME=y
+@@ -36,13 +65,35 @@ CONFIG_CMD_PART=y
+ CONFIG_CMD_READ=y
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
+ CONFIG_CMD_FAT=y
+ CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
+ CONFIG_PARTITION_TYPE_GUID=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_IS_IN_MMC=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGEX=y
+ CONFIG_REGMAP=y
+ CONFIG_SYSCON=y
+ CONFIG_CLK=y
+--- a/configs/mt7981_snfi_nand_rfb_defconfig
++++ b/configs/mt7981_snfi_nand_rfb_defconfig
+@@ -12,7 +12,23 @@ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+ CONFIG_SYS_LOAD_ADDR=0x46000000
+ CONFIG_DEBUG_UART=y
+-# CONFIG_AUTOBOOT is not set
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SPI_BOOT=y
++CONFIG_NAND_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-snfi-nand-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+@@ -22,22 +38,73 @@ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_PLAN9 is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+-# CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_UNLZ4 is not set
+ # CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MTD=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++# CONFIG_MTD_RAW_NAND is not set
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF=y
++CONFIG_CMD_SF_TEST=y
+ CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
+ CONFIG_CMD_SMC=y
+ CONFIG_CMD_UBI=y
+ CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
+ CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGEX=y
+ CONFIG_REGMAP=y
+ CONFIG_SYSCON=y
+ CONFIG_CLK=y
+ # CONFIG_MMC is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_MTD=y
+ CONFIG_DM_MTD=y
+ CONFIG_MTK_SPI_NAND=y
+--- a/configs/mt7981_nor_rfb_defconfig
++++ b/configs/mt7981_nor_rfb_defconfig
+@@ -12,7 +12,22 @@ CONFIG_DEBUG_UART_BASE=0x11002000
+ CONFIG_DEBUG_UART_CLOCK=40000000
+ CONFIG_SYS_LOAD_ADDR=0x46000000
+ CONFIG_DEBUG_UART=y
+-# CONFIG_AUTOBOOT is not set
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SPI_BOOT=y
++CONFIG_BOOTSTD_DEFAULTS=y
++CONFIG_BOOTSTD_FULL=y
+ CONFIG_DEFAULT_FDT_FILE="mt7981-rfb"
+ CONFIG_LOGLEVEL=7
+ CONFIG_LOG=y
+@@ -22,21 +37,66 @@ CONFIG_SYS_PBSIZE=1049
+ # CONFIG_BOOTM_PLAN9 is not set
+ # CONFIG_BOOTM_RTEMS is not set
+ # CONFIG_BOOTM_VXWORKS is not set
+-# CONFIG_CMD_ELF is not set
+ # CONFIG_CMD_UNLZ4 is not set
+ # CONFIG_CMD_UNZIP is not set
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_ELF=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MTD=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF=y
+ CONFIG_CMD_SF_TEST=y
+ CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
+ CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_ENV_IS_IN_MTD=y
++CONFIG_ENV_MTD_NAME="u-boot-env"
++CONFIG_ENV_SIZE_REDUND=0x4000
++CONFIG_ENV_SIZE=0x4000
++CONFIG_ENV_OFFSET=0x0
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+ CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGEX=y
+ CONFIG_REGMAP=y
+ CONFIG_SYSCON=y
+ CONFIG_CLK=y
+ # CONFIG_MMC is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+ CONFIG_MTD=y
+ CONFIG_DM_MTD=y
+ CONFIG_MTD_SPI_NAND=y

package/boot/uboot-mediatek/patches/108-dts-arm64-mt7981-rfb-add-mtd-partitions.patch

@@ -0,0 +1,140 @@
+--- a/arch/arm/dts/mt7981-rfb.dts
++++ b/arch/arm/dts/mt7981-rfb.dts
+@@ -143,6 +143,37 @@
+ 		compatible = "spi-nand";
+ 		reg = <0>;
+ 		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x00000 0x0100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x0100000 0x0080000>;
++			};
++
++			factory: partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x0200000>;
++			};
++
++			partition@380000 {
++				label = "FIP";
++				reg = <0x380000 0x0200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x4000000>;
++			};
++		};
+ 	};
+ };
+ 
+@@ -164,6 +195,37 @@
+ 		compatible = "jedec,spi-nor";
+ 		reg = <0>;
+ 		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@00000 {
++				label = "BL2";
++				reg = <0x00000 0x0040000>;
++			};
++
++			partition@40000 {
++				label = "u-boot-env";
++				reg = <0x40000 0x0010000>;
++			};
++
++			partition@50000 {
++				label = "Factory";
++				reg = <0x50000 0x00B0000>;
++			};
++
++			partition@100000 {
++				label = "FIP";
++				reg = <0x100000 0x0080000>;
++			};
++
++			partition@180000 {
++				label = "firmware";
++				reg = <0x180000 0xE00000>;
++			};
++		};
+ 	};
+ };
+ 
+--- a/arch/arm/dts/mt7981-snfi-nand-rfb.dts
++++ b/arch/arm/dts/mt7981-snfi-nand-rfb.dts
+@@ -107,11 +107,11 @@
+ 	};
+ 
+ 	mmc0_pins_default: mmc0default {
+-                mux {
+-                       function = "flash";
+-                       groups =  "emmc_45";
+-                 };
+-         };
++		mux {
++			function = "flash";
++			groups =  "emmc_45";
++		};
++	};
+ };
+ 
+ &snand {
+@@ -119,6 +119,42 @@
+ 	pinctrl-0 = <&snfi_pins>;
+ 	status = "okay";
+ 	quad-spi;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "BL2";
++				reg = <0x00000 0x0100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x0100000 0x0080000>;
++			};
++
++			factory: partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x0200000>;
++			};
++
++			partition@380000 {
++				label = "FIP";
++				reg = <0x380000 0x0200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x4000000>;
++			};
++		};
++	};
+ };
+ 
+ &pwm {

package/boot/uboot-mediatek/patches/131-spi-mtk_spim-prevent-global-pll-clock-override.patch

@@ -0,0 +1,47 @@
+From 41f225dae30ea6ddcff10f120a9e732f994d3a07 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Nicol=C3=B2=20Veronese?= <nicveronese@gmail.com>
+Date: Tue, 3 Oct 2023 23:46:52 +0200
+Subject: [PATCH] spi: mtk_spim: prevent global pll clock override
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+With commit 793e6230118032a099ec42a1ea67f434721edcc0
+ a new system to calculate the SPI clocks has been added.
+
+Unfortunately, the do_div macro overrides the global
+ priv->pll_clk_rate field. This will cause to have a reduced
+ clock rate on each subsequent SPI call.
+
+Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
+Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
+---
+ drivers/spi/mtk_spim.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+--- a/drivers/spi/mtk_spim.c
++++ b/drivers/spi/mtk_spim.c
+@@ -409,7 +409,7 @@ static int mtk_spim_transfer_wait(struct
+ {
+ 	struct udevice *bus = dev_get_parent(slave->dev);
+ 	struct mtk_spim_priv *priv = dev_get_priv(bus);
+-	u32 sck_l, sck_h, clk_count, reg;
++	u32 pll_clk, sck_l, sck_h, clk_count, reg;
+ 	ulong us = 1;
+ 	int ret = 0;
+ 
+@@ -418,11 +418,12 @@ static int mtk_spim_transfer_wait(struct
+ 	else
+ 		clk_count = op->data.nbytes;
+ 
++	pll_clk = priv->pll_clk_rate;
+ 	sck_l = readl(priv->base + SPI_CFG2_REG) >> SPI_CFG2_SCK_LOW_OFFSET;
+ 	sck_h = readl(priv->base + SPI_CFG2_REG) & SPI_CFG2_SCK_HIGH_MASK;
+-	do_div(priv->pll_clk_rate, sck_l + sck_h + 2);
++	do_div(pll_clk, sck_l + sck_h + 2);
+ 
+-	us = CLK_TO_US(priv->pll_clk_rate, clk_count * 8);
++	us = CLK_TO_US(pll_clk, clk_count * 8);
+ 	us += 1000 * 1000; /* 1s tolerance */
+ 
+ 	if (us > UINT_MAX)

package/boot/uboot-mediatek/patches/200-cmd-add-imsz-and-imszb.patch

@@ -70,7 +70,7 @@
  {
 --- a/boot/image-fit.c
 +++ b/boot/image-fit.c
-@@ -2051,6 +2051,49 @@ static const char *fit_get_image_type_pr
+@@ -2051,6 +2051,47 @@ static const char *fit_get_image_type_pr
  	return "unknown";
  }
  
@@ -93,11 +93,8 @@
 +	max_size = hdrsize;
 +
 +	images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
-+	if (images_noffset < 0) {
-+		printf("Can't find images parent node '%s' (%s)\n",
-+		FIT_IMAGES_PATH, fdt_strerror(images_noffset));
-+		return 0;
-+	}
++	if (images_noffset < 0)
++		goto out;
 +
 +	for (ndepth = 0,
 +	     noffset = fdt_next_node(fit, images_noffset, &ndepth);
@@ -106,7 +103,7 @@
 +		if (ndepth == 1) {
 +			ret = fit_image_get_data_and_size(fit, noffset, &data, &data_size);
 +			if (ret)
-+				return 0;
++				goto out;
 +
 +			img_total = data_size + (data - fit);
 +
@@ -114,6 +111,7 @@
 +		}
 +	}
 +
++out:
 +	return max_size;
 +}
 +

package/boot/uboot-mediatek/patches/431-add-xiaomi_redmi-ax6000.patch

@@ -239,12 +239,12 @@
 +&eth {
 +	status = "okay";
 +	mediatek,gmac-id = <0>;
-+	phy-mode = "sgmii";
++	phy-mode = "2500base-x";
 +	mediatek,switch = "mt7531";
 +	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
 +
 +	fixed-link {
-+		speed = <1000>;
++		speed = <2500>;
 +		full-duplex;
 +	};
 +};

package/boot/uboot-mediatek/patches/436-add-glinet-mt6000.patch

@@ -0,0 +1,274 @@
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-glinet-gl-mt6000.dts
+@@ -0,0 +1,135 @@
++// SPDX-License-Identifier: GPL-2.0
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include <dt-bindings/gpio/gpio.h>
++
++#include "mt7986.dtsi"
++
++/ {
++	model = "GL.iNet GL-MT6000";
++	compatible = "glinet,gl-mt6000", "mediatek,mt7986-emmc-rfb", "mediatek,mt7986";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x40000000>;
++	};
++
++    reg_1p8v: regulator-1p8v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-1.8V";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	reg_3p3v: regulator-3p3v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-3.3V";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		wps {
++			label = "reset";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_blue: green {
++			label = "blue:status";
++			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
++		};
++
++		led_status_white: blue {
++			label = "white:status";
++			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	mmc0_pins_default: mmc0default {
++		mux {
++			function = "flash";
++			groups =  "emmc_51";
++		};
++
++		conf-cmd-dat {
++			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
++			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
++			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
++			input-enable;
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++
++		conf-clk {
++			pins = "EMMC_CK";
++			drive-strength = <MTK_DRIVE_6mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-dsl {
++			pins = "EMMC_DSL";
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++
++		conf-rst {
++			pins = "EMMC_RSTB";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++	};
++};
++
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_default>;
++	bus-width = <8>;
++	max-frequency = <200000000>;
++	cap-mmc-highspeed;
++	cap-mmc-hw-reset;
++	vmmc-supply = <&reg_3p3v>;
++	vqmmc-supply = <&reg_1p8v>;
++	non-removable;
++	status = "okay";
++};
++
++&wmcpu_emi {
++	status = "disabled";
++};
+--- /dev/null
++++ b/configs/mt7986a_glinet_gl-mt6000_defconfig
+@@ -0,0 +1,105 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x80000
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-glinet-gl-mt6000"
++CONFIG_SYS_PROMPT="MT7986> "
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7986=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_AHCI=y
++CONFIG_FIT=y
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-glinet-gl-mt6000.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="glinet_gl-mt6000_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_USB=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/glinet_gl-mt6000_env
+@@ -0,0 +1,25 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++bootdelay=3
++bootfile_bl2=openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip
++bootfile_firmware=openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_title=      *** U-Boot Boot Menu for GL-iNet GL-MT6000 ***
++bootmenu_0=Startup system (Default).=run boot_system
++bootmenu_1=Load Firmware via TFTP then write to eMMC.=run boot_tftp_firmware ; run bootmenu_confirm_return
++bootmenu_2=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_3=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_4=Reboot.=reset
++bootmenu_5=Reset all settings to factory defaults.=run reset_factory ; reset
++filesize_to_blk=setexpr cnt $filesize + 0x1ff && setexpr cnt $cnt / 0x200
++mmc_read_kernel=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr $part_addr $image_size
++boot_system=part start mmc 0 kernel part_addr && part size mmc 0 kernel part_size && run mmc_read_kernel && bootm
++boot_tftp_firmware=tftpboot $loadaddr $bootfile_firmware && run emmc_write_firmware
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++emmc_write_firmware=part start mmc 0 kernel part_addr && run filesize_to_blk && mmc write $loadaddr $part_addr $cnt
++emmc_write_bl2=run filesize_to_blk && test 0x$cnt -le 0x800 && mmc partconf 0 1 1 1 &&  && mmc write $loadaddr 0x0 0x800 ; mmc partconf 0 1 1 0
++emmc_write_fip=part start mmc 0 fip part_addr && part size mmc 0 fip part_size && run filesize_to_blk && test 0x$cnt -le 0x$part_size && mmc write $loadaddr $part_addr $cnt
++reset_factory=eraseenv && reset

package/boot/uboot-mediatek/patches/437-add-cmcc_rax3000m.patch

@@ -0,0 +1,697 @@
+--- /dev/null
++++ b/configs/mt7981_cmcc_rax3000m-emmc_defconfig
+@@ -0,0 +1,175 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7981=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cmcc-rax3000m-emmc"
++CONFIG_DEFAULT_ENV_FILE="cmcc_rax3000m-emmc_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cmcc-rax3000m-emmc.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MMC=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MMC=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_MMC=y
++CONFIG_MMC_DEFAULT_DEV=1
++CONFIG_MMC_HS200_SUPPORT=y
++CONFIG_MMC_MTK=y
++CONFIG_MMC_SUPPORTS_TUNING=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_SPI=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_USB=y
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_MMC=y
++CONFIG_ENV_OFFSET=0x400000
++CONFIG_ENV_OFFSET_REDUND=0x440000
++CONFIG_ENV_SIZE=0x40000
++CONFIG_ENV_SIZE_REDUND=0x40000
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_SUPPORT_EMMC_BOOT=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_CMD_SF=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/configs/mt7981_cmcc_rax3000m-nand_defconfig
+@@ -0,0 +1,175 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7981=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cmcc-rax3000m-nand"
++CONFIG_DEFAULT_ENV_FILE="cmcc_rax3000m-nand_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cmcc-rax3000m-nand.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cmcc-rax3000m.dtsi
+@@ -0,0 +1,85 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "CMCC RAX3000M";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-mesh {
++			label = "mesh";
++			linux,code = <BTN_9>;
++			linux,input-type = <EV_SW>;
++			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "green:status";
++			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
++		};
++
++		led-1 {
++			label = "blue:status";
++			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
++		};
++
++		led-2 {
++			label = "red:status";
++			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cmcc-rax3000m-emmc.dts
+@@ -0,0 +1,53 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++/dts-v1/;
++#include "mt7981-cmcc-rax3000m.dtsi"
++
++/ {
++	reg_3p3v: regulator-3p3v {
++		compatible = "regulator-fixed";
++		regulator-name = "fixed-3.3V";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++		regulator-always-on;
++	};
++};
++
++&mmc0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc0_pins_default>;
++	max-frequency = <26000000>;
++	bus-width = <8>;
++	cap-mmc-hw-reset;
++	vmmc-supply = <&reg_3p3v>;
++	non-removable;
++	status = "okay";
++};
++
++&pinctrl {
++	mmc0_pins_default: mmc0default {
++		mux {
++			function = "flash";
++			groups =  "emmc_45";
++		};
++		conf-cmd-dat {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO",
++				"SPI0_CS",  "SPI0_HOLD", "SPI0_WP",
++				"SPI1_CLK", "SPI1_MOSI", "SPI1_MISO";
++			input-enable;
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++		conf-clk {
++			pins = "SPI1_CS";
++			drive-strength = <MTK_DRIVE_6mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
++		};
++		conf-rst {
++			pins = "PWM0";
++			drive-strength = <MTK_DRIVE_4mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
++		};
++	};
++};
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cmcc-rax3000m-nand.dts
+@@ -0,0 +1,77 @@
++// SPDX-License-Identifier: GPL-2.0-only
++
++/dts-v1/;
++#include "mt7981-cmcc-rax3000m.dtsi"
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "orig-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7200000>;
++			};
++		};
++	};
++};
+--- /dev/null
++++ b/cmcc_rax3000m-emmc_env
+@@ -0,0 +1,55 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=root=/dev/mmcblk0p65
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
++bootconf=config-1#mt7981b-cmcc-rax3000m-emmc
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-cmcc_rax3000m-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-cmcc_rax3000m-emmc-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-cmcc_rax3000m-squashfs-sysupgrade.itb
++bootled_pwr=red:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )  [eMMC]
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_emmc=run boot_production ; run boot_recovery
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
++mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
++part_default=production
++part_recovery=recovery
++reset_factory=eraseenv && reset
++emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
++emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
++emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
++emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
++emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
++emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
++_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
+--- /dev/null
++++ b/cmcc_rax3000m-nand_env
+@@ -0,0 +1,56 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootconf=config-1#mt7981b-cmcc-rax3000m-nand
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-cmcc_rax3000m-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-cmcc_rax3000m-nand-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-cmcc_rax3000m-nand-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-cmcc_rax3000m-squashfs-sysupgrade.itb
++bootled_pwr=red:status
++bootled_rec=blue:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )  [SPI-NAND]
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/438-add-jcg_q30-pro.patch

@@ -0,0 +1,420 @@
+--- /dev/null
++++ b/configs/mt7981_jcg_q30-pro_defconfig
+@@ -0,0 +1,175 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7981=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981_jcg_q30-pro"
++CONFIG_DEFAULT_ENV_FILE="jcg_q30-pro_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981_jcg_q30-pro.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7981_jcg_q30-pro.dts
+@@ -0,0 +1,179 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2022 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "JCG Q30 PRO";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x10000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		factory {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		status_red {
++			label = "red:status";
++			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
++		};
++
++		status_blue {
++			label = "blue:status";
++			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "disabled";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_1";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	pwm_pins: pwm0-pins-func-1 {
++		mux {
++			function = "pwm";
++			groups = "pwm0_1", "pwm1_0";
++		};
++	};
++};
++
++&pwm {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pwm_pins>;
++	status = "okay";
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "orig-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@160000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x200000>;
++			};
++
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x7000000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/jcg_q30-pro_env
+@@ -0,0 +1,57 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-jcg_q30-pro-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-jcg_q30-pro-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-jcg_q30-pro-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-jcg_q30-pro-squashfs-sysupgrade.itb
++bootled_pwr=blue:status
++bootled_rec=red:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_default=production
++part_recovery=recovery
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
++ethaddr_factory=mtd read factory 0x40080000 0xa0000 0x800 && env readmem -b ethaddr 0x4008002a 0x6 ; setenv ethaddr_factory
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/439-add-zyxel_ex5601-t0.patch

@@ -0,0 +1,431 @@
+--- /dev/null
++++ b/configs/mt7986_zyxel_ex5601-t0_defconfig
+@@ -0,0 +1,186 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7986=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-zyxel_ex5601-t0"
++CONFIG_DEFAULT_ENV_FILE="zyxel_ex5601-t0_env"
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-zyxel_ex5601-t0.dtb"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_DEBUG_UART=y
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_SYS_PROMPT="EX5601> "
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_CPU=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_EXT4=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_FDT=y
++CONFIG_CMD_FS_GENERIC=y
++CONFIG_CMD_FS_UUID=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PCI=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_PWM=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_CMD_UBIFS=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_DM_USB=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_MTK=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_PARTITION_UUIDS=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_SCSI=y
++CONFIG_AHCI=y
++CONFIG_AHCI_PCI=y
++CONFIG_SCSI_AHCI=y
++CONFIG_SCSI=y
++CONFIG_CMD_SCSI=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_MTK_AHCI=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PCI=y
++CONFIG_DM_PCI=y
++CONFIG_PCIE_MEDIATEK=y
++# CONFIG_MMC is not set
++# CONFIG_DM_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_UBI_FASTMAP=y
++# CONFIG_DM_PCI is not set
++# CONFIG_PCIE_MEDIATEK is not set
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++# CONFIG_I2C is not set
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPI_NAND=y
++CONFIG_MTK_SPI_NAND_MTD=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_LZO=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_USB=y
++CONFIG_USB_HOST=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_MTK=y
++CONFIG_USB_STORAGE=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_SIZE=0x1f000
++CONFIG_ENV_SIZE_REDUND=0x1f000
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY_FIXED=y
++CONFIG_DM_ETH=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7986=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_HEXDUMP=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTK_SPIM=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_NAND_TRIMFFS=y
++CONFIG_LMB_MAX_REGIONS=64
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
+--- /dev/null
++++ b/arch/arm/dts/mt7986a-zyxel_ex5601-t0.dts
+@@ -0,0 +1,181 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Author: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
++ * Author: Nicolò Veronese <nicveronese@gmail.com>
++ */
++
++/dts-v1/;
++#include <dt-bindings/input/linux-event-codes.h>
++#include "mt7986.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Zyxel EX5601-T0 ubootmod";
++	compatible = "mediatek,mt7986", "mediatek,mt7986-sd-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++		factory {
++			label = "reset";
++			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_RESTART>;
++		};
++
++		wps {
++			label = "wps";
++			gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_WPS_BUTTON>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status_green: pwr {
++			label = "green:status";
++			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
++			default-state = "off";
++		};
++
++		led_sfp_green: sfp {
++			label = "green:sfp";
++			gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
++			default-state = "off";
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>;
++	status = "disabled";
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <0>;
++	phy-mode = "2500base-x";
++	mediatek,switch = "mt7531";
++	reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
++
++	fixed-link {
++		speed = <2500>;
++		full-duplex;
++	};
++};
++
++&pinctrl {
++	spic_pins: spi1-pins-func-1 {
++		mux {
++			function = "spi";
++			groups = "spi1_2";
++		};
++	};
++
++	uart1_pins: spi1-pins-func-3 {
++		mux {
++			function = "uart";
++			groups = "uart1_2";
++		};
++	};
++
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <1>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <20000000>;
++		spi-tx-buswidth = <4>;
++		spi-rx-buswidth = <4>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x0100000 0x0080000>;
++			};
++
++			partition@180000 {
++				label = "Factory";
++				reg = <0x180000 0x0200000>;
++			};
++
++			partition@380000 {
++				label = "fip";
++				reg = <0x380000 0x0200000>;
++			};
++
++			partition@540000 {
++				label = "zloader";
++				reg = <0x540000 0x0040000>;
++				read-only;
++			};
++			partition@580000 {
++				label = "ubi";
++				reg = <0x580000 0x1da80000>;
++			};
++		};
++	};
++};
++
++&watchdog {
++	status = "disabled";
++};
++
+--- /dev/null
++++ b/zyxel_ex5601-t0_env
+@@ -0,0 +1,55 @@
++ethaddr_factory=mtd read Factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x4008002A 0x6 ; setenv ethaddr_factory
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootargs=console=ttyS0,115200n8 console_msg_format=syslog
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-squashfs-sysupgrade.itb
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=run ubi_read_production && bootm $loadaddr#$bootconf
++boot_recovery=run ubi_read_recovery && bootm $loadaddr#$bootconf
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++part_fit=fit
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr $part_fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/firmware/ath11k-firmware/Makefile

@@ -50,7 +50,7 @@ QCN9074_BOARD_REV:=8e140c65f36137714b6d8934e09dcd73cb05c2f6
 QCN9074_BOARD_FILE:=board-2.bin.$(QCN9074_BOARD_REV)
 
 define Download/qcn9074-board
-  URL:=https://github.com/kvalo/ath11k-firmware/raw/master/QCN9074/hw1.0/
+  URL:=https://git.codelinaro.org/clo/ath-firmware/ath11k-firmware/-/raw/main/QCN9074/hw1.0/
   URL_FILE:=board-2.bin
   FILE:=$(QCN9074_BOARD_FILE)
   HASH:=dbf0ca14aa1229eccd48f26f1026901b9718b143bd30b51b8ea67c84ba6207f1

package/firmware/intel-microcode/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=intel-microcode
-PKG_VERSION:=20230808
+PKG_VERSION:=20240312
 PKG_RELEASE:=1
 
 PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).1.tar.xz
 PKG_SOURCE_URL:=@DEBIAN/pool/non-free-firmware/i/intel-microcode/
-PKG_HASH:=29e77c275b3f60a691832c0844f70effbd94a4594d04af21e0c2e6e0c1ac1894
+PKG_HASH:=25f53bab1bf0c84aba927a77a97a9f1147c94199fa95b5187d874f839f022808
 PKG_BUILD_DIR:=$(BUILD_DIR)/intel-microcode-3.$(PKG_VERSION).1
 PKG_CPE_ID:=cpe:/a:intel:microcode
 

package/firmware/ipq-wifi/Makefile

@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/version.mk
 
 PKG_NAME:=ipq-wifi
-PKG_RELEASE:=2
+PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
-PKG_SOURCE_DATE:=2023-06-03
-PKG_SOURCE_VERSION:=cd9c30ca47b8e5388b770c523a7f6b8b969e2f92
-PKG_MIRROR_HASH:=45e623fcc512b514ade0f22e217275536aa8de4afba7dfdb11696482b8fa71a2
+PKG_SOURCE_DATE:=2023-11-10
+PKG_SOURCE_VERSION:=0c2e810e71ed0a59fb00246c7fa2c236ff67a0ee
+PKG_MIRROR_HASH:=fc6016540bd2c67484952d0e4432d740f0e022d9b688e851bb6321def8d36844
 
 PKG_FLAGS:=nonshared
 

package/firmware/wireless-regdb/Makefile

@@ -1,12 +1,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wireless-regdb
-PKG_VERSION:=2023.09.01
+PKG_VERSION:=2024.01.23
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
 PKG_SOURCE_URL:=@KERNEL/software/network/wireless-regdb/
-PKG_HASH:=26d4c2a727cc59239b84735aad856b7c7d0b04e30aa5c235c4f7f47f5f053491
+PKG_HASH:=c8a61c9acf76fa7eb4239e89f640dee3e87098d9f69b4d3518c9c60fc6d20c55
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
@@ -16,7 +16,7 @@ define Package/wireless-regdb
   PKGARCH:=all
   SECTION:=firmware
   CATEGORY:=Firmware
-  URL:=https://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git/
+  URL:=https://git.kernel.org/pub/scm/linux/kernel/git/wens/wireless-regdb.git/
   TITLE:=Wireless Regulatory Database
 endef
 

package/kernel/bcm27xx-gpu-fw/Makefile

@@ -2,8 +2,8 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=bcm27xx-gpu-fw
-PKG_VERSION:=2022-05-16
-PKG_RELEASE:=3673be308132de102fdff491d1333d9d0f823557
+PKG_VERSION:=2024-01-11
+PKG_RELEASE:=0968de28716a9b1f106b8492646d0ed0a2800152
 
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)/rpi-firmware-$(PKG_RELEASE)
 
@@ -26,7 +26,7 @@ define Download/bootcode_bin
   FILE:=$(RPI_FIRMWARE_FILE)-bootcode.bin
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=bootcode.bin
-  HASH:=69309823da13dc96b89e3d82b44f820e4f84efa79d207adad2c8784559794f03
+  HASH:=af603ebd97e7b692c30195563f7b25656eb05d57838cf1a715ebb470d1614ce4
 endef
 $(eval $(call Download,bootcode_bin))
 
@@ -34,7 +34,7 @@ define Download/fixup_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup.dat
-  HASH:=921f56c62ad1995addb984b156c869202dc5d46bbe9ebcbd02c20f0def9058e3
+  HASH:=c28ea955e672e374016dca61d63afa026490f0473a98115908586ab48e324aeb
 endef
 $(eval $(call Download,fixup_dat))
 
@@ -42,7 +42,7 @@ define Download/fixup_cd_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup_cd.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup_cd.dat
-  HASH:=83a985aa0d73844786f3b3bf674826c520212f6f72fc6a890f2ebb5f87de5d8c
+  HASH:=3cf1aef5f596ca106203ed5dac9ad45e85929ec55ce44c813588645e174442ec
 endef
 $(eval $(call Download,fixup_cd_dat))
 
@@ -50,7 +50,7 @@ define Download/fixup_x_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup_x.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup_x.dat
-  HASH:=8b00b00678adafe01e087240d156dbc87822e745b269be4f282596b69265cd1e
+  HASH:=56525c8feabde1ab86f36bb09bc55171659b2993f94132cf81ffc4293d62269d
 endef
 $(eval $(call Download,fixup_x_dat))
 
@@ -58,7 +58,7 @@ define Download/fixup4_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4.dat
-  HASH:=ef2b5d2a0a95ca48e00a1ce78b7650ee9e947cc1c588704c8ae30c1623122e2f
+  HASH:=615f8595801bf52373039f73ad5ad9513f83400d355eb1b2c075c7ae907e927c
 endef
 $(eval $(call Download,fixup4_dat))
 
@@ -66,7 +66,7 @@ define Download/fixup4cd_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4cd.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4cd.dat
-  HASH:=83a985aa0d73844786f3b3bf674826c520212f6f72fc6a890f2ebb5f87de5d8c
+  HASH:=3cf1aef5f596ca106203ed5dac9ad45e85929ec55ce44c813588645e174442ec
 endef
 $(eval $(call Download,fixup4cd_dat))
 
@@ -74,7 +74,7 @@ define Download/fixup4x_dat
   FILE:=$(RPI_FIRMWARE_FILE)-fixup4x.dat
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=fixup4x.dat
-  HASH:=a6c4e30ada5a00fe7de83c460638ca824647651bb4a3644b8c65d7ba1d9f2d2b
+  HASH:=6d27a4b8ecb78cef9e1f03751b4aaec5ce8749d36988f381145a8a41dbf164ae
 endef
 $(eval $(call Download,fixup4x_dat))
 
@@ -82,7 +82,7 @@ define Download/start_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start.elf
-  HASH:=5455c148f4b8b04c553809bd22b995ee49ba5279ca3848df8bde6f80a388f7e0
+  HASH:=e8348e88522e7a1d0e2b0944ab66d7d8f4f30da98f326e2b3c123522e45f71b2
 endef
 $(eval $(call Download,start_elf))
 
@@ -90,7 +90,7 @@ define Download/start_cd_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start_cd.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start_cd.elf
-  HASH:=168c0a9178d5a3b4bd89ef770826a85b4ea3132560ba3600c212c0cec4c575c6
+  HASH:=c9b4de3f12bec7808868b898c49f656b5378ddc315f12ccab83d6519bad51680
 endef
 $(eval $(call Download,start_cd_elf))
 
@@ -98,7 +98,7 @@ define Download/start_x_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start_x.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start_x.elf
-  HASH:=30c6a7f32a25185053ca3ca9e4bcfe932246ed42a1b7c37f8803209f93d86404
+  HASH:=0b5c06c109984361eeed0ab14d146f686d8aa8da2025689b887e9cb098636db9
 endef
 $(eval $(call Download,start_x_elf))
 
@@ -106,7 +106,7 @@ define Download/start4_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4.elf
-  HASH:=be8bbff41dba2749b7b0e812f0a9d87a9122d18508f7b5ff3cd20f303d15bc07
+  HASH:=fedc4ecd72c9d21018e210240dcd2e41a8bb5f936fb5674c3351f2a447a22203
 endef
 $(eval $(call Download,start4_elf))
 
@@ -114,7 +114,7 @@ define Download/start4cd_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4cd.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4cd.elf
-  HASH:=000372e9cf6815ade595948dbd6328665f2a535eeee44e74b0ec8e56b6fbbf90
+  HASH:=ea22282a77666801378137a651e7e0b17cc186f63cdbdc8b9bb98749cd12b256
 endef
 $(eval $(call Download,start4cd_elf))
 
@@ -122,7 +122,7 @@ define Download/start4x_elf
   FILE:=$(RPI_FIRMWARE_FILE)-start4x.elf
   URL:=$(RPI_FIRMWARE_URL)
   URL_FILE:=start4x.elf
-  HASH:=48895858f7936570dfab44c67bdcb0357ac8fcd630162c36ac9ed8f2de85c038
+  HASH:=c509e73a9cba7af3223dea885f58294bd04845e822aa3d6278500fa4dcdb112f
 endef
 $(eval $(call Download,start4x_elf))
 

package/kernel/lantiq/ltq-vmmc/Makefile

@@ -29,6 +29,7 @@ define KernelPackage/ltq-vmmc
   DEPENDS:=@(TARGET_lantiq_xway||TARGET_lantiq_xrx200) +kmod-ltq-tapi
   FILES:=$(PKG_BUILD_DIR)/src/drv_vmmc.ko
   AUTOLOAD:=$(call AutoProbe,drv_vmmc)
+  USERID:=:vmmc=386
 endef
 
 define KernelPackage/ltq-vmmc/description

package/kernel/lantiq/ltq-vmmc/files/vmmc.init

@@ -8,6 +8,7 @@ start() {
 	for i in 10 11 12 13 14 15 16 17 18; do
 		if ! [ -e /dev/vmmc$i ]; then
 			mknod -m 664 /dev/vmmc$i c 122 $i
+			chown root:vmmc /dev/vmmc$i
 		fi
 	done
 }

package/kernel/linux/modules/fs.mk

@@ -352,8 +352,7 @@ define KernelPackage/fs-ksmbd
   DEPENDS:= \
 	  +kmod-nls-base \
 	  +kmod-nls-utf8 \
-	  +kmod-crypto-md4 \
-          +kmod-crypto-md5 \
+	  +kmod-crypto-md5 \
 	  +kmod-crypto-hmac \
 	  +kmod-crypto-ecb \
 	  +kmod-crypto-des \

package/kernel/linux/modules/netdevices.mk

@@ -361,9 +361,9 @@ $(eval $(call KernelPackage,phy-smsc))
 define KernelPackage/phy-aquantia
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Aquantia Ethernet PHYs
-  DEPENDS:=+kmod-libphy +kmod-hwmon-core
+  DEPENDS:=+kmod-libphy +kmod-hwmon-core +kmod-lib-crc-ccitt
   KCONFIG:=CONFIG_AQUANTIA_PHY
-  FILES:=$(LINUX_DIR)/drivers/net/phy/aquantia.ko
+  FILES:=$(LINUX_DIR)/drivers/net/phy/aquantia/aquantia.ko
   AUTOLOAD:=$(call AutoLoad,18,aquantia,1)
 endef
 

package/kernel/linux/modules/netsupport.mk

@@ -993,7 +993,7 @@ endef
 $(eval $(call KernelPackage,bpf-test))
 
 
-SCHED_MODULES_EXTRA = sch_codel sch_dsmark sch_gred sch_multiq sch_sfq sch_teql sch_fq act_pedit act_simple act_csum em_cmp em_nbyte em_meta em_text
+SCHED_MODULES_EXTRA = sch_codel sch_gred sch_multiq sch_sfq sch_teql sch_fq act_pedit act_simple act_csum em_cmp em_nbyte em_meta em_text
 SCHED_FILES_EXTRA = $(foreach mod,$(SCHED_MODULES_EXTRA),$(LINUX_DIR)/net/sched/$(mod).ko)
 
 define KernelPackage/sched
@@ -1002,7 +1002,6 @@ define KernelPackage/sched
   DEPENDS:=+kmod-sched-core +kmod-lib-crc32c +kmod-lib-textsearch
   KCONFIG:= \
 	CONFIG_NET_SCH_CODEL \
-	CONFIG_NET_SCH_DSMARK \
 	CONFIG_NET_SCH_GRED \
 	CONFIG_NET_SCH_MULTIQ \
 	CONFIG_NET_SCH_SFQ \

package/kernel/linux/modules/other.mk

@@ -1013,31 +1013,33 @@ define KernelPackage/zram/description
 endef
 
 define KernelPackage/zram/config
-  choice
-    prompt "ZRAM Default compressor"
-    default ZRAM_DEF_COMP_LZORLE
+  if PACKAGE_kmod-zram
+    choice
+      prompt "ZRAM Default compressor"
+      default ZRAM_DEF_COMP_LZORLE
 
-  config ZRAM_DEF_COMP_LZORLE
+    config ZRAM_DEF_COMP_LZORLE
             bool "lzo-rle"
             select PACKAGE_kmod-lib-lzo
 
-  config ZRAM_DEF_COMP_LZO
+    config ZRAM_DEF_COMP_LZO
             bool "lzo"
             select PACKAGE_kmod-lib-lzo
 
-  config ZRAM_DEF_COMP_LZ4
+    config ZRAM_DEF_COMP_LZ4
             bool "lz4"
             select PACKAGE_kmod-lib-lz4
 
-  config ZRAM_DEF_COMP_LZ4HC
+    config ZRAM_DEF_COMP_LZ4HC
             bool "lz4-hc"
             select PACKAGE_kmod-lib-lz4hc
 
-  config ZRAM_DEF_COMP_ZSTD
+    config ZRAM_DEF_COMP_ZSTD
             bool "zstd"
             select PACKAGE_kmod-lib-zstd
 
-  endchoice
+    endchoice
+  endif
 endef
 
 $(eval $(call KernelPackage,zram))

package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh

@@ -145,7 +145,7 @@ mac80211_hostapd_setup_base() {
 	[ "$auto_channel" = 0 ] && [ -z "$channel_list" ] && \
 		channel_list="$channel"
 
-	[ "$min_tx_power" -gt 0 ] && append base_cfg "min_tx_power=$min_tx_power"
+	[ "$min_tx_power" -gt 0 ] && append base_cfg "min_tx_power=$min_tx_power" "$N"
 
 	set_default noscan 0
 
@@ -327,6 +327,11 @@ mac80211_hostapd_setup_base() {
 		[ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
 		vht_cap="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))"
 
+		[ "$vht_oper_chwidth" -lt 2 ] && {
+			vht160=0
+			short_gi_160=0
+		}
+
 		mac80211_add_capabilities vht_capab $vht_cap \
 			RXLDPC:0x10::$rxldpc \
 			SHORT-GI-80:0x20::$short_gi_80 \
@@ -423,9 +428,9 @@ mac80211_hostapd_setup_base() {
 			he_bss_color:128 \
 			he_bss_color_enabled:1
 
-		he_phy_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: AP/,$p' | awk -F "[()]" '/HE PHY Capabilities/ { print $2 }' | head -1)
+		he_phy_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: .*AP/,$p' | awk -F "[()]" '/HE PHY Capabilities/ { print $2 }' | head -1)
 		he_phy_cap=${he_phy_cap:2}
-		he_mac_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: AP/,$p' | awk -F "[()]" '/HE MAC Capabilities/ { print $2 }' | head -1)
+		he_mac_cap=$(iw phy "$phy" info | sed -n '/HE Iftypes: .*AP/,$p' | awk -F "[()]" '/HE MAC Capabilities/ { print $2 }' | head -1)
 		he_mac_cap=${he_mac_cap:2}
 
 		append base_cfg "ieee80211ax=1" "$N"
@@ -940,7 +945,7 @@ mac80211_setup_supplicant() {
 	if [ "$mode" = "sta" ]; then
 		wpa_supplicant_add_network "$ifname"
 	else
-		wpa_supplicant_add_network "$ifname" "$freq" "$htmode" "$noscan"
+		wpa_supplicant_add_network "$ifname" "$freq" "$htmode" "$hostapd_noscan"
 	fi
 
 	wpa_supplicant_add_interface "$ifname" "$mode"

package/kernel/mac80211/patches/ath11k/0085-wifi-ath11k-fix-memory-leak-in-WMI-firmware-stats.patch

@@ -0,0 +1,51 @@
+From 6aafa1c2d3e3fea2ebe84c018003f2a91722e607 Mon Sep 17 00:00:00 2001
+From: P Praneesh <quic_ppranees@quicinc.com>
+Date: Tue, 6 Jun 2023 14:41:28 +0530
+Subject: [PATCH] wifi: ath11k: fix memory leak in WMI firmware stats
+
+Memory allocated for firmware pdev, vdev and beacon statistics
+are not released during rmmod.
+
+Fix it by calling ath11k_fw_stats_free() function before hardware
+unregister.
+
+While at it, avoid calling ath11k_fw_stats_free() while processing
+the firmware stats received in the WMI event because the local list
+is getting spliced and reinitialised and hence there are no elements
+in the list after splicing.
+
+Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
+Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230606091128.14202-1-quic_adisi@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/mac.c | 1 +
+ drivers/net/wireless/ath/ath11k/wmi.c | 5 +++++
+ 2 files changed, 6 insertions(+)
+
+--- a/drivers/net/wireless/ath/ath11k/mac.c
++++ b/drivers/net/wireless/ath/ath11k/mac.c
+@@ -9792,6 +9792,7 @@ void ath11k_mac_destroy(struct ath11k_ba
+ 		if (!ar)
+ 			continue;
+ 
++		ath11k_fw_stats_free(&ar->fw_stats);
+ 		ieee80211_free_hw(ar->hw);
+ 		pdev->ar = NULL;
+ 	}
+--- a/drivers/net/wireless/ath/ath11k/wmi.c
++++ b/drivers/net/wireless/ath/ath11k/wmi.c
+@@ -8119,6 +8119,11 @@ complete:
+ 	rcu_read_unlock();
+ 	spin_unlock_bh(&ar->data_lock);
+ 
++	/* Since the stats's pdev, vdev and beacon list are spliced and reinitialised
++	 * at this point, no need to free the individual list.
++	 */
++	return;
++
+ free:
+ 	ath11k_fw_stats_free(&stats);
+ }

package/kernel/mac80211/patches/ath11k/0086-wifi-ath11k-Add-missing-check-for-ioremap.patch

@@ -0,0 +1,38 @@
+From 16e0077e14a73866e9b0f4a6bf4ad3d4a5cb0f2a Mon Sep 17 00:00:00 2001
+From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
+Date: Tue, 13 Jun 2023 12:19:40 +0300
+Subject: [PATCH] wifi: ath11k: Add missing check for ioremap
+
+Add check for ioremap() and return the error if it fails in order to
+guarantee the success of ioremap(), same as in
+ath11k_qmi_load_file_target_mem().
+
+Fixes: 6ac04bdc5edb ("ath11k: Use reserved host DDR addresses from DT for PCI devices")
+Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230608022858.27405-1-jiasheng@iscas.ac.cn
+---
+ drivers/net/wireless/ath/ath11k/qmi.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/net/wireless/ath/ath11k/qmi.c
++++ b/drivers/net/wireless/ath/ath11k/qmi.c
+@@ -2061,6 +2061,9 @@ static int ath11k_qmi_assign_target_mem_
+ 			ab->qmi.target_mem[idx].iaddr =
+ 				ioremap(ab->qmi.target_mem[idx].paddr,
+ 					ab->qmi.target_mem[i].size);
++			if (!ab->qmi.target_mem[idx].iaddr)
++				return -EIO;
++
+ 			ab->qmi.target_mem[idx].size = ab->qmi.target_mem[i].size;
+ 			host_ddr_sz = ab->qmi.target_mem[i].size;
+ 			ab->qmi.target_mem[idx].type = ab->qmi.target_mem[i].type;
+@@ -2086,6 +2089,8 @@ static int ath11k_qmi_assign_target_mem_
+ 					ab->qmi.target_mem[idx].iaddr =
+ 						ioremap(ab->qmi.target_mem[idx].paddr,
+ 							ab->qmi.target_mem[i].size);
++					if (!ab->qmi.target_mem[idx].iaddr)
++						return -EIO;
+ 				} else {
+ 					ab->qmi.target_mem[idx].paddr =
+ 						ATH11K_QMI_CALDB_ADDRESS;

package/kernel/mac80211/patches/ath11k/0087-wifi-ath11k-Add-missing-ops-config-for-IPQ5018-in.patch

@@ -0,0 +1,30 @@
+From 469ddb20cae61cad9c4f208a4c8682305905a511 Mon Sep 17 00:00:00 2001
+From: Ziyang Huang <hzyitc@outlook.com>
+Date: Thu, 15 Jun 2023 14:41:47 +0300
+Subject: [PATCH] wifi: ath11k: Add missing ops config for IPQ5018 in
+ ath11k_ahb_probe()
+
+Without this patch, the IPQ5018 WiFi will fail and print the following
+logs:
+
+	[   11.033179] ath11k c000000.wifi: unsupported device type 7
+	[   11.033223] ath11k: probe of c000000.wifi failed with error -95
+
+Fixes: 25edca7bb18a ("wifi: ath11k: add ipq5018 device support")
+Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/TYZPR01MB5556D7AA10ABEDDDD2D8F39EC953A@TYZPR01MB5556.apcprd01.prod.exchangelabs.com
+---
+ drivers/net/wireless/ath/ath11k/ahb.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/ath/ath11k/ahb.c
++++ b/drivers/net/wireless/ath/ath11k/ahb.c
+@@ -1127,6 +1127,7 @@ static int ath11k_ahb_probe(struct platf
+ 	switch (hw_rev) {
+ 	case ATH11K_HW_IPQ8074:
+ 	case ATH11K_HW_IPQ6018_HW10:
++	case ATH11K_HW_IPQ5018_HW10:
+ 		hif_ops = &ath11k_ahb_hif_ops_ipq8074;
+ 		pci_ops = NULL;
+ 		break;

package/kernel/mac80211/patches/ath11k/0088-wifi-ath11k-Restart-firmware-after-cold-boot-calibration.patch

@@ -0,0 +1,47 @@
+From 80c5390e1f5e5b16d820512265530ef26073d8e0 Mon Sep 17 00:00:00 2001
+From: Ziyang Huang <hzyitc@outlook.com>
+Date: Thu, 15 Jun 2023 14:41:48 +0300
+Subject: [PATCH] wifi: ath11k: Restart firmware after cold boot calibration
+ for IPQ5018
+
+Restart is required after cold boot calibration on IPQ5018. Otherwise,
+we get the following exception:
+
+	[   14.412829] qcom-q6-mpd cd00000.remoteproc: fatal error received: err_smem_ver.2.1:
+	[   14.412829] QC Image Version : QC_IMAGE_VERSION_STRING=WLAN.HK.2.6.0.1-00974-QCAHKSWPL_SILICONZ-1
+	[   14.412829] Image Variant : IMAGE_VARIANT_STRING=5018.wlanfw2.map_spr_spr_evalQ
+	[   14.412829] DALSysLogEvent.c:174 Assertion 0 failed param0 :zero,param1 :zero,param2 :zero
+	[   14.412829] Thread ID : 0x00000048 Thread name : WLAN RT0 Process ID : 0x00000001 Process name :wlan0
+	[   14.412829]
+	[   14.412829] Registers:
+	[   14.412829] SP : 0x4c81c120
+	[   14.412829] FP : 0x4c81c138
+	[   14.412829] PC : 0xb022c590
+	[   14.412829] SSR : 0x00000000
+	[   14.412829] BADVA : 0x00000000
+	[   14.412829] LR : 0xb0008490
+	[   14.412829]
+	[   14.412829] StackDump
+	[   14.412829] from:0x4c81c120
+	[   14.412829] to: 0x00000000:
+	[   14.412829]
+	[   14.463006] remoteproc remoteproc0: crash detected in cd00000.remoteproc: type fatal error
+
+Fixes: 8dfe875aa24a ("wifi: ath11k: update hw params for IPQ5018")
+Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/TYZPR01MB55566969818BD4B49E770445C953A@TYZPR01MB5556.apcprd01.prod.exchangelabs.com
+---
+ drivers/net/wireless/ath/ath11k/core.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/ath/ath11k/core.c
++++ b/drivers/net/wireless/ath/ath11k/core.c
+@@ -668,6 +668,7 @@ static const struct ath11k_hw_params ath
+ 		.hal_params = &ath11k_hw_hal_params_ipq8074,
+ 		.single_pdev_only = false,
+ 		.cold_boot_calib = true,
++		.cbcal_restart_fw = true,
+ 		.fix_l1ss = true,
+ 		.supports_dynamic_smps_6ghz = false,
+ 		.alloc_cacheable_memory = true,

package/kernel/mac80211/patches/ath11k/0089-wifi-ath11k-Add-missing-hw_ops-get_ring_selector-for.patch

@@ -0,0 +1,58 @@
+From ce282d8de71f07f0056ea319541141152c65f552 Mon Sep 17 00:00:00 2001
+From: Ziyang Huang <hzyitc@outlook.com>
+Date: Thu, 15 Jun 2023 14:41:48 +0300
+Subject: [PATCH] wifi: ath11k: Add missing hw_ops->get_ring_selector() for
+ IPQ5018
+
+During sending data after clients connected, hw_ops->get_ring_selector()
+will be called. But for IPQ5018, this member isn't set, and the
+following NULL pointer exception will be occurred:
+
+	[   38.840478] 8<--- cut here ---
+	[   38.840517] Unable to handle kernel NULL pointer dereference at virtual address 00000000
+	...
+	[   38.923161] PC is at 0x0
+	[   38.927930] LR is at ath11k_dp_tx+0x70/0x730 [ath11k]
+	...
+	[   39.063264] Process hostapd (pid: 1034, stack limit = 0x801ceb3d)
+	[   39.068994] Stack: (0x856a9a68 to 0x856aa000)
+	...
+	[   39.438467] [<7f323804>] (ath11k_dp_tx [ath11k]) from [<7f314e6c>] (ath11k_mac_op_tx+0x80/0x190 [ath11k])
+	[   39.446607] [<7f314e6c>] (ath11k_mac_op_tx [ath11k]) from [<7f17dbe0>] (ieee80211_handle_wake_tx_queue+0x7c/0xc0 [mac80211])
+	[   39.456162] [<7f17dbe0>] (ieee80211_handle_wake_tx_queue [mac80211]) from [<7f174450>] (ieee80211_probereq_get+0x584/0x704 [mac80211])
+	[   39.467443] [<7f174450>] (ieee80211_probereq_get [mac80211]) from [<7f178c40>] (ieee80211_tx_prepare_skb+0x1f8/0x248 [mac80211])
+	[   39.479334] [<7f178c40>] (ieee80211_tx_prepare_skb [mac80211]) from [<7f179e28>] (__ieee80211_subif_start_xmit+0x32c/0x3d4 [mac80211])
+	[   39.491053] [<7f179e28>] (__ieee80211_subif_start_xmit [mac80211]) from [<7f17af08>] (ieee80211_tx_control_port+0x19c/0x288 [mac80211])
+	[   39.502946] [<7f17af08>] (ieee80211_tx_control_port [mac80211]) from [<7f0fc704>] (nl80211_tx_control_port+0x174/0x1d4 [cfg80211])
+	[   39.515017] [<7f0fc704>] (nl80211_tx_control_port [cfg80211]) from [<808ceac4>] (genl_rcv_msg+0x154/0x340)
+	[   39.526814] [<808ceac4>] (genl_rcv_msg) from [<808cdb74>] (netlink_rcv_skb+0xb8/0x11c)
+	[   39.536446] [<808cdb74>] (netlink_rcv_skb) from [<808ce1d0>] (genl_rcv+0x28/0x34)
+	[   39.544344] [<808ce1d0>] (genl_rcv) from [<808cd234>] (netlink_unicast+0x174/0x274)
+	[   39.551895] [<808cd234>] (netlink_unicast) from [<808cd510>] (netlink_sendmsg+0x1dc/0x440)
+	[   39.559362] [<808cd510>] (netlink_sendmsg) from [<808596e0>] (____sys_sendmsg+0x1a8/0x1fc)
+	[   39.567697] [<808596e0>] (____sys_sendmsg) from [<8085b1a8>] (___sys_sendmsg+0xa4/0xdc)
+	[   39.575941] [<8085b1a8>] (___sys_sendmsg) from [<8085b310>] (sys_sendmsg+0x44/0x74)
+	[   39.583841] [<8085b310>] (sys_sendmsg) from [<80300060>] (ret_fast_syscall+0x0/0x40)
+	...
+	[   39.620734] Code: bad PC value
+	[   39.625869] ---[ end trace 8aef983ad3cbc032 ]---
+
+Fixes: ba60f2793d3a ("wifi: ath11k: initialize hw_ops for IPQ5018")
+Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/TYZPR01MB5556D6E3F63EAB5129D11420C953A@TYZPR01MB5556.apcprd01.prod.exchangelabs.com
+---
+ drivers/net/wireless/ath/ath11k/hw.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ath/ath11k/hw.c
++++ b/drivers/net/wireless/ath/ath11k/hw.c
+@@ -1178,7 +1178,7 @@ const struct ath11k_hw_ops ipq5018_ops =
+ 	.mpdu_info_get_peerid = ath11k_hw_ipq8074_mpdu_info_get_peerid,
+ 	.rx_desc_mac_addr2_valid = ath11k_hw_ipq9074_rx_desc_mac_addr2_valid,
+ 	.rx_desc_mpdu_start_addr2 = ath11k_hw_ipq9074_rx_desc_mpdu_start_addr2,
+-
++	.get_ring_selector = ath11k_hw_ipq8074_get_tcl_ring_selector,
+ };
+ 
+ #define ATH11K_TX_RING_MASK_0 BIT(0)

package/kernel/mac80211/patches/ath11k/0090-Revert-wifi-ath11k-Enable-threaded-NAPI.patch

@@ -0,0 +1,44 @@
+From d265ebe41c911314bd273c218a37088835959fa1 Mon Sep 17 00:00:00 2001
+From: Kalle Valo <quic_kvalo@quicinc.com>
+Date: Thu, 20 Jul 2023 18:14:44 +0300
+Subject: [PATCH] Revert "wifi: ath11k: Enable threaded NAPI"
+
+This reverts commit 13aa2fb692d3717767303817f35b3e650109add3.
+
+This commit broke QCN9074 initialisation:
+
+[  358.960477] ath11k_pci 0000:04:00.0: ce desc not available for wmi command 36866
+[  358.960481] ath11k_pci 0000:04:00.0: failed to send WMI_STA_POWERSAVE_PARAM_CMDID
+[  358.960484] ath11k_pci 0000:04:00.0: could not set uapsd params -105
+
+As there's no fix available let's just revert it to get QCN9074 working again.
+
+Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217536
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Signed-off-by: Kalle Valo <kvalo@kernel.org>
+Link: https://lore.kernel.org/r/20230720151444.2016637-1-kvalo@kernel.org
+---
+ drivers/net/wireless/ath/ath11k/ahb.c  | 1 -
+ drivers/net/wireless/ath/ath11k/pcic.c | 1 -
+ 2 files changed, 2 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/ahb.c
++++ b/drivers/net/wireless/ath/ath11k/ahb.c
+@@ -376,7 +376,6 @@ static void ath11k_ahb_ext_irq_enable(st
+ 		struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
+ 
+ 		if (!irq_grp->napi_enabled) {
+-			dev_set_threaded(&irq_grp->napi_ndev, true);
+ 			napi_enable(&irq_grp->napi);
+ 			irq_grp->napi_enabled = true;
+ 		}
+--- a/drivers/net/wireless/ath/ath11k/pcic.c
++++ b/drivers/net/wireless/ath/ath11k/pcic.c
+@@ -466,7 +466,6 @@ void ath11k_pcic_ext_irq_enable(struct a
+ 		struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
+ 
+ 		if (!irq_grp->napi_enabled) {
+-			dev_set_threaded(&irq_grp->napi_ndev, true);
+ 			napi_enable(&irq_grp->napi);
+ 			irq_grp->napi_enabled = true;
+ 		}

package/kernel/mac80211/patches/ath11k/0091-wifi-ath11k-Split-coldboot-calibration-hw_param.patch

@@ -0,0 +1,180 @@
+From 011e5a3052a22d3758d17442bf0c04c68bf79bea Mon Sep 17 00:00:00 2001
+From: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
+Date: Wed, 26 Jul 2023 19:40:30 +0530
+Subject: [PATCH 3/5] wifi: ath11k: Split coldboot calibration hw_param
+
+QCN9074 enables coldboot calibration only in Factory Test Mode (FTM).
+Hence, split cold_boot_calib to two hw_params for mission and FTM
+mode.
+
+Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
+Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230726141032.3061-2-quic_rajkbhag@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/ahb.c  |  3 +--
+ drivers/net/wireless/ath/ath11k/core.c | 36 ++++++++++++++++++++------
+ drivers/net/wireless/ath/ath11k/core.h |  1 +
+ drivers/net/wireless/ath/ath11k/hw.h   |  3 ++-
+ drivers/net/wireless/ath/ath11k/qmi.c  |  6 ++---
+ 5 files changed, 35 insertions(+), 14 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/ahb.c
++++ b/drivers/net/wireless/ath/ath11k/ahb.c
+@@ -422,8 +422,7 @@ static int ath11k_ahb_fwreset_from_cold_
+ {
+ 	int timeout;
+ 
+-	if (ath11k_cold_boot_cal == 0 || ab->qmi.cal_done ||
+-	    ab->hw_params.cold_boot_calib == 0 ||
++	if (!ath11k_core_coldboot_cal_support(ab) || ab->qmi.cal_done ||
+ 	    ab->hw_params.cbcal_restart_fw == 0)
+ 		return 0;
+ 
+--- a/drivers/net/wireless/ath/ath11k/core.c
++++ b/drivers/net/wireless/ath/ath11k/core.c
+@@ -86,7 +86,8 @@ static const struct ath11k_hw_params ath
+ 		.supports_shadow_regs = false,
+ 		.idle_ps = false,
+ 		.supports_sta_ps = false,
+-		.cold_boot_calib = true,
++		.coldboot_cal_mm = true,
++		.coldboot_cal_ftm = true,
+ 		.cbcal_restart_fw = true,
+ 		.fw_mem_mode = 0,
+ 		.num_vdevs = 16 + 1,
+@@ -167,7 +168,8 @@ static const struct ath11k_hw_params ath
+ 		.supports_shadow_regs = false,
+ 		.idle_ps = false,
+ 		.supports_sta_ps = false,
+-		.cold_boot_calib = true,
++		.coldboot_cal_mm = true,
++		.coldboot_cal_ftm = true,
+ 		.cbcal_restart_fw = true,
+ 		.fw_mem_mode = 0,
+ 		.num_vdevs = 16 + 1,
+@@ -248,7 +250,8 @@ static const struct ath11k_hw_params ath
+ 		.supports_shadow_regs = true,
+ 		.idle_ps = true,
+ 		.supports_sta_ps = true,
+-		.cold_boot_calib = false,
++		.coldboot_cal_mm = false,
++		.coldboot_cal_ftm = false,
+ 		.cbcal_restart_fw = false,
+ 		.fw_mem_mode = 0,
+ 		.num_vdevs = 16 + 1,
+@@ -332,7 +335,8 @@ static const struct ath11k_hw_params ath
+ 		.supports_shadow_regs = false,
+ 		.idle_ps = false,
+ 		.supports_sta_ps = false,
+-		.cold_boot_calib = false,
++		.coldboot_cal_mm = false,
++		.coldboot_cal_ftm = false,
+ 		.cbcal_restart_fw = false,
+ 		.fw_mem_mode = 2,
+ 		.num_vdevs = 8,
+@@ -413,7 +417,8 @@ static const struct ath11k_hw_params ath
+ 		.supports_shadow_regs = true,
+ 		.idle_ps = true,
+ 		.supports_sta_ps = true,
+-		.cold_boot_calib = false,
++		.coldboot_cal_mm = false,
++		.coldboot_cal_ftm = false,
+ 		.cbcal_restart_fw = false,
+ 		.fw_mem_mode = 0,
+ 		.num_vdevs = 16 + 1,
+@@ -495,7 +500,8 @@ static const struct ath11k_hw_params ath
+ 		.supports_shadow_regs = true,
+ 		.idle_ps = true,
+ 		.supports_sta_ps = true,
+-		.cold_boot_calib = false,
++		.coldboot_cal_mm = false,
++		.coldboot_cal_ftm = false,
+ 		.cbcal_restart_fw = false,
+ 		.fw_mem_mode = 0,
+ 		.num_vdevs = 16 + 1,
+@@ -578,7 +584,8 @@ static const struct ath11k_hw_params ath
+ 		.supports_shadow_regs = true,
+ 		.idle_ps = true,
+ 		.supports_sta_ps = true,
+-		.cold_boot_calib = true,
++		.coldboot_cal_mm = true,
++		.coldboot_cal_ftm = true,
+ 		.cbcal_restart_fw = false,
+ 		.fw_mem_mode = 0,
+ 		.num_vdevs = 16 + 1,
+@@ -667,7 +674,8 @@ static const struct ath11k_hw_params ath
+ 		.supports_suspend = false,
+ 		.hal_params = &ath11k_hw_hal_params_ipq8074,
+ 		.single_pdev_only = false,
+-		.cold_boot_calib = true,
++		.coldboot_cal_mm = true,
++		.coldboot_cal_ftm = true,
+ 		.cbcal_restart_fw = true,
+ 		.fix_l1ss = true,
+ 		.supports_dynamic_smps_6ghz = false,
+@@ -749,6 +757,18 @@ void ath11k_fw_stats_free(struct ath11k_
+ 	ath11k_fw_stats_bcn_free(&stats->bcn);
+ }
+ 
++bool ath11k_core_coldboot_cal_support(struct ath11k_base *ab)
++{
++	if (!ath11k_cold_boot_cal)
++		return false;
++
++	if (ath11k_ftm_mode)
++		return ab->hw_params.coldboot_cal_ftm;
++
++	else
++		return ab->hw_params.coldboot_cal_mm;
++}
++
+ int ath11k_core_suspend(struct ath11k_base *ab)
+ {
+ 	int ret;
+--- a/drivers/net/wireless/ath/ath11k/core.h
++++ b/drivers/net/wireless/ath/ath11k/core.h
+@@ -1186,6 +1186,7 @@ void ath11k_core_halt(struct ath11k *ar)
+ int ath11k_core_resume(struct ath11k_base *ab);
+ int ath11k_core_suspend(struct ath11k_base *ab);
+ void ath11k_core_pre_reconfigure_recovery(struct ath11k_base *ab);
++bool ath11k_core_coldboot_cal_support(struct ath11k_base *ab);
+ 
+ const struct firmware *ath11k_core_firmware_request(struct ath11k_base *ab,
+ 						    const char *filename);
+--- a/drivers/net/wireless/ath/ath11k/hw.h
++++ b/drivers/net/wireless/ath/ath11k/hw.h
+@@ -187,7 +187,8 @@ struct ath11k_hw_params {
+ 	bool supports_shadow_regs;
+ 	bool idle_ps;
+ 	bool supports_sta_ps;
+-	bool cold_boot_calib;
++	bool coldboot_cal_mm;
++	bool coldboot_cal_ftm;
+ 	bool cbcal_restart_fw;
+ 	int fw_mem_mode;
+ 	u32 num_vdevs;
+--- a/drivers/net/wireless/ath/ath11k/qmi.c
++++ b/drivers/net/wireless/ath/ath11k/qmi.c
+@@ -2082,7 +2082,7 @@ static int ath11k_qmi_assign_target_mem_
+ 				return -EINVAL;
+ 			}
+ 
+-			if (ath11k_cold_boot_cal && ab->hw_params.cold_boot_calib) {
++			if (ath11k_core_coldboot_cal_support(ab)) {
+ 				if (hremote_node) {
+ 					ab->qmi.target_mem[idx].paddr =
+ 							res.start + host_ddr_sz;
+@@ -3212,8 +3212,8 @@ static void ath11k_qmi_driver_event_work
+ 				break;
+ 			}
+ 
+-			if (ath11k_cold_boot_cal && ab->qmi.cal_done == 0 &&
+-			    ab->hw_params.cold_boot_calib) {
++			if (ab->qmi.cal_done == 0 &&
++			    ath11k_core_coldboot_cal_support(ab)) {
+ 				ath11k_qmi_process_coldboot_calibration(ab);
+ 			} else {
+ 				clear_bit(ATH11K_FLAG_CRASH_FLUSH,

package/kernel/mac80211/patches/ath11k/0092-wifi-ath11k-Add-coldboot-calibration-support-for-QCN.patch

@@ -0,0 +1,176 @@
+From bdfc967bf5fcd762473a01d39edb81f1165ba290 Mon Sep 17 00:00:00 2001
+From: Anilkumar Kolli <quic_akolli@quicinc.com>
+Date: Wed, 26 Jul 2023 19:40:31 +0530
+Subject: [PATCH 4/5] wifi: ath11k: Add coldboot calibration support for
+ QCN9074
+
+QCN9074 supports 6 GHz, which has increased number of channels
+compared to 5 GHz/2 GHz. So, to support coldboot calibration in
+QCN9074 ATH11K_COLD_BOOT_FW_RESET_DELAY extended to 60 seconds. To
+avoid code redundancy, fwreset_from_cold_boot moved to QMI and made
+common for both ahb and pci. Coldboot calibration is enabled only in
+FTM mode for QCN9074. QCN9074 requires firmware restart after coldboot,
+hence enable cbcal_restart_fw in hw_params.
+
+This support can be enabled/disabled using hw params for different
+hardware. Currently it is not enabled for QCA6390.
+
+Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com>
+Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
+Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230726141032.3061-3-quic_rajkbhag@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/ahb.c  | 28 ++------------------------
+ drivers/net/wireless/ath/ath11k/core.c |  4 ++--
+ drivers/net/wireless/ath/ath11k/pci.c  |  2 ++
+ drivers/net/wireless/ath/ath11k/qmi.c  | 28 ++++++++++++++++++++++++++
+ drivers/net/wireless/ath/ath11k/qmi.h  |  3 ++-
+ 5 files changed, 36 insertions(+), 29 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/ahb.c
++++ b/drivers/net/wireless/ath/ath11k/ahb.c
+@@ -14,6 +14,7 @@
+ #include "ahb.h"
+ #include "debug.h"
+ #include "hif.h"
++#include "qmi.h"
+ #include <linux/remoteproc.h>
+ #include "pcic.h"
+ #include <linux/soc/qcom/smem.h>
+@@ -418,31 +419,6 @@ static void ath11k_ahb_power_down(struct
+ 	rproc_shutdown(ab_ahb->tgt_rproc);
+ }
+ 
+-static int ath11k_ahb_fwreset_from_cold_boot(struct ath11k_base *ab)
+-{
+-	int timeout;
+-
+-	if (!ath11k_core_coldboot_cal_support(ab) || ab->qmi.cal_done ||
+-	    ab->hw_params.cbcal_restart_fw == 0)
+-		return 0;
+-
+-	ath11k_dbg(ab, ATH11K_DBG_AHB, "wait for cold boot done\n");
+-	timeout = wait_event_timeout(ab->qmi.cold_boot_waitq,
+-				     (ab->qmi.cal_done  == 1),
+-				     ATH11K_COLD_BOOT_FW_RESET_DELAY);
+-	if (timeout <= 0) {
+-		ath11k_cold_boot_cal = 0;
+-		ath11k_warn(ab, "Coldboot Calibration failed timed out\n");
+-	}
+-
+-	/* reset the firmware */
+-	ath11k_ahb_power_down(ab);
+-	ath11k_ahb_power_up(ab);
+-
+-	ath11k_dbg(ab, ATH11K_DBG_AHB, "exited from cold boot mode\n");
+-	return 0;
+-}
+-
+ static void ath11k_ahb_init_qmi_ce_config(struct ath11k_base *ab)
+ {
+ 	struct ath11k_qmi_ce_cfg *cfg = &ab->qmi.ce_cfg;
+@@ -1225,7 +1201,7 @@ static int ath11k_ahb_probe(struct platf
+ 		goto err_ce_free;
+ 	}
+ 
+-	ath11k_ahb_fwreset_from_cold_boot(ab);
++	ath11k_qmi_fwreset_from_cold_boot(ab);
+ 
+ 	return 0;
+ 
+--- a/drivers/net/wireless/ath/ath11k/core.c
++++ b/drivers/net/wireless/ath/ath11k/core.c
+@@ -336,8 +336,8 @@ static const struct ath11k_hw_params ath
+ 		.idle_ps = false,
+ 		.supports_sta_ps = false,
+ 		.coldboot_cal_mm = false,
+-		.coldboot_cal_ftm = false,
+-		.cbcal_restart_fw = false,
++		.coldboot_cal_ftm = true,
++		.cbcal_restart_fw = true,
+ 		.fw_mem_mode = 2,
+ 		.num_vdevs = 8,
+ 		.num_peers = 128,
+--- a/drivers/net/wireless/ath/ath11k/pci.c
++++ b/drivers/net/wireless/ath/ath11k/pci.c
+@@ -15,6 +15,7 @@
+ #include "mhi.h"
+ #include "debug.h"
+ #include "pcic.h"
++#include "qmi.h"
+ 
+ #define ATH11K_PCI_BAR_NUM		0
+ #define ATH11K_PCI_DMA_MASK		32
+@@ -897,6 +898,7 @@ unsupported_wcn6855_soc:
+ 		ath11k_err(ab, "failed to init core: %d\n", ret);
+ 		goto err_irq_affinity_cleanup;
+ 	}
++	ath11k_qmi_fwreset_from_cold_boot(ab);
+ 	return 0;
+ 
+ err_irq_affinity_cleanup:
+--- a/drivers/net/wireless/ath/ath11k/qmi.c
++++ b/drivers/net/wireless/ath/ath11k/qmi.c
+@@ -9,6 +9,7 @@
+ #include "qmi.h"
+ #include "core.h"
+ #include "debug.h"
++#include "hif.h"
+ #include <linux/of.h>
+ #include <linux/of_address.h>
+ #include <linux/ioport.h>
+@@ -2842,6 +2843,33 @@ int ath11k_qmi_firmware_start(struct ath
+ 	return 0;
+ }
+ 
++int ath11k_qmi_fwreset_from_cold_boot(struct ath11k_base *ab)
++{
++	int timeout;
++
++	if (!ath11k_core_coldboot_cal_support(ab) || ab->qmi.cal_done ||
++	    ab->hw_params.cbcal_restart_fw == 0)
++		return 0;
++
++	ath11k_dbg(ab, ATH11K_DBG_QMI, "wait for cold boot done\n");
++
++	timeout = wait_event_timeout(ab->qmi.cold_boot_waitq,
++				     (ab->qmi.cal_done == 1),
++				     ATH11K_COLD_BOOT_FW_RESET_DELAY);
++
++	if (timeout <= 0) {
++		ath11k_warn(ab, "Coldboot Calibration timed out\n");
++		return -ETIMEDOUT;
++	}
++
++	/* reset the firmware */
++	ath11k_hif_power_down(ab);
++	ath11k_hif_power_up(ab);
++	ath11k_dbg(ab, ATH11K_DBG_QMI, "exit wait for cold boot done\n");
++	return 0;
++}
++EXPORT_SYMBOL(ath11k_qmi_fwreset_from_cold_boot);
++
+ static int ath11k_qmi_process_coldboot_calibration(struct ath11k_base *ab)
+ {
+ 	int timeout;
+--- a/drivers/net/wireless/ath/ath11k/qmi.h
++++ b/drivers/net/wireless/ath/ath11k/qmi.h
+@@ -37,7 +37,7 @@
+ 
+ #define QMI_WLANFW_MAX_DATA_SIZE_V01		6144
+ #define ATH11K_FIRMWARE_MODE_OFF		4
+-#define ATH11K_COLD_BOOT_FW_RESET_DELAY		(40 * HZ)
++#define ATH11K_COLD_BOOT_FW_RESET_DELAY		(60 * HZ)
+ 
+ #define ATH11K_QMI_DEVICE_BAR_SIZE		0x200000
+ 
+@@ -519,5 +519,6 @@ void ath11k_qmi_msg_recv_work(struct wor
+ void ath11k_qmi_deinit_service(struct ath11k_base *ab);
+ int ath11k_qmi_init_service(struct ath11k_base *ab);
+ void ath11k_qmi_free_resource(struct ath11k_base *ab);
++int ath11k_qmi_fwreset_from_cold_boot(struct ath11k_base *ab);
+ 
+ #endif

package/kernel/mac80211/patches/ath11k/0093-wifi-ath11k-Remove-cal_done-check-during-probe.patch

@@ -0,0 +1,33 @@
+From 13329d0cb7212b058bd8451a99d215a8f97645ea Mon Sep 17 00:00:00 2001
+From: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
+Date: Wed, 26 Jul 2023 19:40:32 +0530
+Subject: [PATCH] wifi: ath11k: Remove cal_done check during probe
+
+In some race conditions, calibration done QMI message is received even
+before host wait starts for calibration to be done.
+Due to this, resetting firmware was not performed after calibration.
+
+Hence, remove cal_done check in ath11k_qmi_fwreset_from_cold_boot()
+as this is called only from probe.
+
+Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
+
+Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
+Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230726141032.3061-4-quic_rajkbhag@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/qmi.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ath/ath11k/qmi.c
++++ b/drivers/net/wireless/ath/ath11k/qmi.c
+@@ -2847,7 +2847,7 @@ int ath11k_qmi_fwreset_from_cold_boot(st
+ {
+ 	int timeout;
+ 
+-	if (!ath11k_core_coldboot_cal_support(ab) || ab->qmi.cal_done ||
++	if (!ath11k_core_coldboot_cal_support(ab) ||
+ 	    ab->hw_params.cbcal_restart_fw == 0)
+ 		return 0;
+ 

package/kernel/mac80211/patches/ath11k/0094-wifi-ath11k-mhi-add-a-warning-message-for-MHI_CB_EE.patch

@@ -0,0 +1,34 @@
+From 4a93b554cf9fa64faa7cf164c0d32fc3ce67108b Mon Sep 17 00:00:00 2001
+From: Arowa Suliman <arowa@chromium.org>
+Date: Sat, 26 Aug 2023 08:42:42 +0300
+Subject: [PATCH] wifi: ath11k: mhi: add a warning message for MHI_CB_EE_RDDM
+ crash
+
+Currently, the ath11k driver does not print a crash signature when a
+MHI_CB_EE_RDDM crash happens. Checked by triggering a simulated crash using the
+command and checking dmesg for logs:
+
+echo assert > /sys/kernel/debug/ath11k/../simulate_fw_crash
+
+Add a warning when firmware crash MHI_CB_EE_RDDM happens.
+
+Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
+
+Signed-off-by: Arowa Suliman <arowa@chromium.org>
+Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230714001126.463127-1-arowa@chromium.org
+---
+ drivers/net/wireless/ath/ath11k/mhi.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/ath/ath11k/mhi.c
++++ b/drivers/net/wireless/ath/ath11k/mhi.c
+@@ -333,6 +333,7 @@ static void ath11k_mhi_op_status_cb(stru
+ 		ath11k_warn(ab, "firmware crashed: MHI_CB_SYS_ERROR\n");
+ 		break;
+ 	case MHI_CB_EE_RDDM:
++		ath11k_warn(ab, "firmware crashed: MHI_CB_EE_RDDM\n");
+ 		if (!(test_bit(ATH11K_FLAG_UNREGISTERING, &ab->dev_flags)))
+ 			queue_work(ab->workqueue_aux, &ab->reset_work);
+ 		break;

package/kernel/mac80211/patches/ath11k/0095-wifi-ath11k-add-chip-id-board-name-while-searching-b.patch

@@ -0,0 +1,214 @@
+From 1133af5aea588a58043244a4ecb5ce511b310356 Mon Sep 17 00:00:00 2001
+From: Wen Gong <quic_wgong@quicinc.com>
+Date: Wed, 30 Aug 2023 02:02:26 -0400
+Subject: [PATCH] wifi: ath11k: add chip id board name while searching
+ board-2.bin for WCN6855
+
+Sometimes board-2.bin does not have the board data which matched the
+parameters such as bus type, vendor, device, subsystem-vendor,
+subsystem-device, qmi-chip-id and qmi-board-id, then wlan will load fail.
+
+Hence add another type which only matches the bus type and qmi-chip-id,
+then the ratio of missing board data reduced.
+
+Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
+
+Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230830060226.18664-1-quic_wgong@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/core.c | 108 ++++++++++++++++++++-----
+ 1 file changed, 87 insertions(+), 21 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/core.c
++++ b/drivers/net/wireless/ath/ath11k/core.c
+@@ -985,9 +985,15 @@ int ath11k_core_check_dt(struct ath11k_b
+ 	return 0;
+ }
+ 
++enum ath11k_bdf_name_type {
++	ATH11K_BDF_NAME_FULL,
++	ATH11K_BDF_NAME_BUS_NAME,
++	ATH11K_BDF_NAME_CHIP_ID,
++};
++
+ static int __ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
+ 					   size_t name_len, bool with_variant,
+-					   bool bus_type_mode)
++					   enum ath11k_bdf_name_type name_type)
+ {
+ 	/* strlen(',variant=') + strlen(ab->qmi.target.bdf_ext) */
+ 	char variant[9 + ATH11K_QMI_BDF_EXT_STR_LENGTH] = { 0 };
+@@ -998,11 +1004,8 @@ static int __ath11k_core_create_board_na
+ 
+ 	switch (ab->id.bdf_search) {
+ 	case ATH11K_BDF_SEARCH_BUS_AND_BOARD:
+-		if (bus_type_mode)
+-			scnprintf(name, name_len,
+-				  "bus=%s",
+-				  ath11k_bus_str(ab->hif.bus));
+-		else
++		switch (name_type) {
++		case ATH11K_BDF_NAME_FULL:
+ 			scnprintf(name, name_len,
+ 				  "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x,qmi-chip-id=%d,qmi-board-id=%d%s",
+ 				  ath11k_bus_str(ab->hif.bus),
+@@ -1012,6 +1015,19 @@ static int __ath11k_core_create_board_na
+ 				  ab->qmi.target.chip_id,
+ 				  ab->qmi.target.board_id,
+ 				  variant);
++			break;
++		case ATH11K_BDF_NAME_BUS_NAME:
++			scnprintf(name, name_len,
++				  "bus=%s",
++				  ath11k_bus_str(ab->hif.bus));
++			break;
++		case ATH11K_BDF_NAME_CHIP_ID:
++			scnprintf(name, name_len,
++				  "bus=%s,qmi-chip-id=%d",
++				  ath11k_bus_str(ab->hif.bus),
++				  ab->qmi.target.chip_id);
++			break;
++		}
+ 		break;
+ 	default:
+ 		scnprintf(name, name_len,
+@@ -1030,19 +1046,29 @@ static int __ath11k_core_create_board_na
+ static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
+ 					 size_t name_len)
+ {
+-	return __ath11k_core_create_board_name(ab, name, name_len, true, false);
++	return __ath11k_core_create_board_name(ab, name, name_len, true,
++					       ATH11K_BDF_NAME_FULL);
+ }
+ 
+ static int ath11k_core_create_fallback_board_name(struct ath11k_base *ab, char *name,
+ 						  size_t name_len)
+ {
+-	return __ath11k_core_create_board_name(ab, name, name_len, false, false);
++	return __ath11k_core_create_board_name(ab, name, name_len, false,
++					       ATH11K_BDF_NAME_FULL);
+ }
+ 
+ static int ath11k_core_create_bus_type_board_name(struct ath11k_base *ab, char *name,
+ 						  size_t name_len)
+ {
+-	return __ath11k_core_create_board_name(ab, name, name_len, false, true);
++	return __ath11k_core_create_board_name(ab, name, name_len, false,
++					       ATH11K_BDF_NAME_BUS_NAME);
++}
++
++static int ath11k_core_create_chip_id_board_name(struct ath11k_base *ab, char *name,
++						 size_t name_len)
++{
++	return __ath11k_core_create_board_name(ab, name, name_len, false,
++					       ATH11K_BDF_NAME_CHIP_ID);
+ }
+ 
+ const struct firmware *ath11k_core_firmware_request(struct ath11k_base *ab,
+@@ -1289,16 +1315,21 @@ int ath11k_core_fetch_board_data_api_1(s
+ #define BOARD_NAME_SIZE 200
+ int ath11k_core_fetch_bdf(struct ath11k_base *ab, struct ath11k_board_data *bd)
+ {
+-	char boardname[BOARD_NAME_SIZE], fallback_boardname[BOARD_NAME_SIZE];
++	char *boardname = NULL, *fallback_boardname = NULL, *chip_id_boardname = NULL;
+ 	char *filename, filepath[100];
+-	int ret;
++	int ret = 0;
+ 
+ 	filename = ATH11K_BOARD_API2_FILE;
++	boardname = kzalloc(BOARD_NAME_SIZE, GFP_KERNEL);
++	if (!boardname) {
++		ret = -ENOMEM;
++		goto exit;
++	}
+ 
+-	ret = ath11k_core_create_board_name(ab, boardname, sizeof(boardname));
++	ret = ath11k_core_create_board_name(ab, boardname, BOARD_NAME_SIZE);
+ 	if (ret) {
+ 		ath11k_err(ab, "failed to create board name: %d", ret);
+-		return ret;
++		goto exit;
+ 	}
+ 
+ 	ab->bd_api = 2;
+@@ -1307,13 +1338,19 @@ int ath11k_core_fetch_bdf(struct ath11k_
+ 						 ATH11K_BD_IE_BOARD_NAME,
+ 						 ATH11K_BD_IE_BOARD_DATA);
+ 	if (!ret)
+-		goto success;
++		goto exit;
++
++	fallback_boardname = kzalloc(BOARD_NAME_SIZE, GFP_KERNEL);
++	if (!fallback_boardname) {
++		ret = -ENOMEM;
++		goto exit;
++	}
+ 
+ 	ret = ath11k_core_create_fallback_board_name(ab, fallback_boardname,
+-						     sizeof(fallback_boardname));
++						     BOARD_NAME_SIZE);
+ 	if (ret) {
+ 		ath11k_err(ab, "failed to create fallback board name: %d", ret);
+-		return ret;
++		goto exit;
+ 	}
+ 
+ 	ret = ath11k_core_fetch_board_data_api_n(ab, bd, fallback_boardname,
+@@ -1321,7 +1358,28 @@ int ath11k_core_fetch_bdf(struct ath11k_
+ 						 ATH11K_BD_IE_BOARD_NAME,
+ 						 ATH11K_BD_IE_BOARD_DATA);
+ 	if (!ret)
+-		goto success;
++		goto exit;
++
++	chip_id_boardname = kzalloc(BOARD_NAME_SIZE, GFP_KERNEL);
++	if (!chip_id_boardname) {
++		ret = -ENOMEM;
++		goto exit;
++	}
++
++	ret = ath11k_core_create_chip_id_board_name(ab, chip_id_boardname,
++						    BOARD_NAME_SIZE);
++	if (ret) {
++		ath11k_err(ab, "failed to create chip id board name: %d", ret);
++		goto exit;
++	}
++
++	ret = ath11k_core_fetch_board_data_api_n(ab, bd, chip_id_boardname,
++						 ATH11K_BD_IE_BOARD,
++						 ATH11K_BD_IE_BOARD_NAME,
++						 ATH11K_BD_IE_BOARD_DATA);
++
++	if (!ret)
++		goto exit;
+ 
+ 	ab->bd_api = 1;
+ 	ret = ath11k_core_fetch_board_data_api_1(ab, bd, ATH11K_DEFAULT_BOARD_FILE);
+@@ -1334,14 +1392,22 @@ int ath11k_core_fetch_bdf(struct ath11k_
+ 			ath11k_err(ab, "failed to fetch board data for %s from %s\n",
+ 				   fallback_boardname, filepath);
+ 
++		ath11k_err(ab, "failed to fetch board data for %s from %s\n",
++			   chip_id_boardname, filepath);
++
+ 		ath11k_err(ab, "failed to fetch board.bin from %s\n",
+ 			   ab->hw_params.fw.dir);
+-		return ret;
+ 	}
+ 
+-success:
+-	ath11k_dbg(ab, ATH11K_DBG_BOOT, "using board api %d\n", ab->bd_api);
+-	return 0;
++exit:
++	kfree(boardname);
++	kfree(fallback_boardname);
++	kfree(chip_id_boardname);
++
++	if (!ret)
++		ath11k_dbg(ab, ATH11K_DBG_BOOT, "using board api %d\n", ab->bd_api);
++
++	return ret;
+ }
+ 
+ int ath11k_core_fetch_regdb(struct ath11k_base *ab, struct ath11k_board_data *bd)

package/kernel/mac80211/patches/ath11k/0096-wifi-ath11k-fix-boot-failure-with-one-MSI-vector.patch

@@ -0,0 +1,103 @@
+From 39564b475ac5a589e6c22c43a08cbd283c295d2c Mon Sep 17 00:00:00 2001
+From: Baochen Qiang <quic_bqiang@quicinc.com>
+Date: Thu, 7 Sep 2023 09:56:06 +0800
+Subject: [PATCH] wifi: ath11k: fix boot failure with one MSI vector
+
+Commit 5b32b6dd96633 ("ath11k: Remove core PCI references from
+PCI common code") breaks with one MSI vector because it moves
+affinity setting after IRQ request, see below log:
+
+[ 1417.278835] ath11k_pci 0000:02:00.0: failed to receive control response completion, polling..
+[ 1418.302829] ath11k_pci 0000:02:00.0: Service connect timeout
+[ 1418.302833] ath11k_pci 0000:02:00.0: failed to connect to HTT: -110
+[ 1418.303669] ath11k_pci 0000:02:00.0: failed to start core: -110
+
+The detail is, if do affinity request after IRQ activated,
+which is done in request_irq(), kernel caches that request and
+returns success directly. Later when a subsequent MHI interrupt is
+fired, kernel will do the real affinity setting work, as a result,
+changs the MSI vector. However at that time host has configured
+old vector to hardware, so host never receives CE or DP interrupts.
+
+Fix it by setting affinity before registering MHI controller
+where host is, for the first time, doing IRQ request.
+
+Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
+Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
+Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1
+
+Fixes: 5b32b6dd9663 ("ath11k: Remove core PCI references from PCI common code")
+Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
+Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
+Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
+Link: https://lore.kernel.org/r/20230907015606.16297-1-quic_bqiang@quicinc.com
+---
+ drivers/net/wireless/ath/ath11k/pci.c | 24 ++++++++++++------------
+ 1 file changed, 12 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath11k/pci.c
++++ b/drivers/net/wireless/ath/ath11k/pci.c
+@@ -852,10 +852,16 @@ unsupported_wcn6855_soc:
+ 	if (ret)
+ 		goto err_pci_disable_msi;
+ 
++	ret = ath11k_pci_set_irq_affinity_hint(ab_pci, cpumask_of(0));
++	if (ret) {
++		ath11k_err(ab, "failed to set irq affinity %d\n", ret);
++		goto err_pci_disable_msi;
++	}
++
+ 	ret = ath11k_mhi_register(ab_pci);
+ 	if (ret) {
+ 		ath11k_err(ab, "failed to register mhi: %d\n", ret);
+-		goto err_pci_disable_msi;
++		goto err_irq_affinity_cleanup;
+ 	}
+ 
+ 	ret = ath11k_hal_srng_init(ab);
+@@ -876,12 +882,6 @@ unsupported_wcn6855_soc:
+ 		goto err_ce_free;
+ 	}
+ 
+-	ret = ath11k_pci_set_irq_affinity_hint(ab_pci, cpumask_of(0));
+-	if (ret) {
+-		ath11k_err(ab, "failed to set irq affinity %d\n", ret);
+-		goto err_free_irq;
+-	}
+-
+ 	/* kernel may allocate a dummy vector before request_irq and
+ 	 * then allocate a real vector when request_irq is called.
+ 	 * So get msi_data here again to avoid spurious interrupt
+@@ -890,20 +890,17 @@ unsupported_wcn6855_soc:
+ 	ret = ath11k_pci_config_msi_data(ab_pci);
+ 	if (ret) {
+ 		ath11k_err(ab, "failed to config msi_data: %d\n", ret);
+-		goto err_irq_affinity_cleanup;
++		goto err_free_irq;
+ 	}
+ 
+ 	ret = ath11k_core_init(ab);
+ 	if (ret) {
+ 		ath11k_err(ab, "failed to init core: %d\n", ret);
+-		goto err_irq_affinity_cleanup;
++		goto err_free_irq;
+ 	}
+ 	ath11k_qmi_fwreset_from_cold_boot(ab);
+ 	return 0;
+ 
+-err_irq_affinity_cleanup:
+-	ath11k_pci_set_irq_affinity_hint(ab_pci, NULL);
+-
+ err_free_irq:
+ 	ath11k_pcic_free_irq(ab);
+ 
+@@ -916,6 +913,9 @@ err_hal_srng_deinit:
+ err_mhi_unregister:
+ 	ath11k_mhi_unregister(ab_pci);
+ 
++err_irq_affinity_cleanup:
++	ath11k_pci_set_irq_affinity_hint(ab_pci, NULL);
++
+ err_pci_disable_msi:
+ 	ath11k_pci_free_msi(ab_pci);
+ 

package/kernel/mac80211/patches/ath11k/100-wifi-ath11k-use-unique-QRTR-instance-ID.patch

@@ -93,7 +93,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
  	default:
  		return "UNKNOWN";
  	}
-@@ -336,27 +366,14 @@ static void ath11k_mhi_op_status_cb(stru
+@@ -337,27 +367,14 @@ static void ath11k_mhi_op_status_cb(stru
  		if (!(test_bit(ATH11K_FLAG_UNREGISTERING, &ab->dev_flags)))
  			queue_work(ab->workqueue_aux, &ab->reset_work);
  		break;
@@ -138,7 +138,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
  int ath11k_mhi_register(struct ath11k_pci *ar_pci);
 --- a/drivers/net/wireless/ath/ath11k/pci.c
 +++ b/drivers/net/wireless/ath/ath11k/pci.c
-@@ -370,13 +370,20 @@ static void ath11k_pci_sw_reset(struct a
+@@ -371,13 +371,20 @@ static void ath11k_pci_sw_reset(struct a
  static void ath11k_pci_init_qmi_ce_config(struct ath11k_base *ab)
  {
  	struct ath11k_qmi_ce_cfg *cfg = &ab->qmi.ce_cfg;

package/kernel/mac80211/patches/ath11k/901-wifi-ath11k-pci-fix-compilation-in-5.16-and-older.patch

@@ -15,7 +15,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
 
 --- a/drivers/net/wireless/ath/ath11k/pci.c
 +++ b/drivers/net/wireless/ath/ath11k/pci.c
-@@ -458,7 +458,11 @@ static int ath11k_pci_alloc_msi(struct a
+@@ -459,7 +459,11 @@ static int ath11k_pci_alloc_msi(struct a
  	pci_read_config_dword(pci_dev, pci_dev->msi_cap + PCI_MSI_ADDRESS_LO,
  			      &ab->pci.msi.addr_lo);
  

package/kernel/mac80211/patches/ath11k/902-ath11k-Disable-coldboot-calibration-for-IPQ8074.patch

@@ -13,12 +13,14 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
 
 --- a/drivers/net/wireless/ath/ath11k/core.c
 +++ b/drivers/net/wireless/ath/ath11k/core.c
-@@ -86,7 +86,7 @@ static const struct ath11k_hw_params ath
+@@ -86,8 +86,8 @@ static const struct ath11k_hw_params ath
  		.supports_shadow_regs = false,
  		.idle_ps = false,
  		.supports_sta_ps = false,
--		.cold_boot_calib = true,
-+		.cold_boot_calib = false,
+-		.coldboot_cal_mm = true,
+-		.coldboot_cal_ftm = true,
++		.coldboot_cal_mm = false,
++		.coldboot_cal_ftm = false,
  		.cbcal_restart_fw = true,
  		.fw_mem_mode = 0,
  		.num_vdevs = 16 + 1,

package/kernel/mac80211/patches/ath11k/903-ath11k-support-setting-FW-memory-mode-via-DT.patch

@@ -31,7 +31,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
  	{
  		.hw_rev = ATH11K_HW_IPQ8074,
  		.name = "ipq8074 hw2.0",
-@@ -1953,7 +1953,8 @@ static void ath11k_core_reset(struct wor
+@@ -2040,7 +2040,8 @@ static void ath11k_core_reset(struct wor
  static int ath11k_init_hw_params(struct ath11k_base *ab)
  {
  	const struct ath11k_hw_params *hw_params = NULL;
@@ -41,7 +41,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
  
  	for (i = 0; i < ARRAY_SIZE(ath11k_hw_params); i++) {
  		hw_params = &ath11k_hw_params[i];
-@@ -1969,7 +1970,30 @@ static int ath11k_init_hw_params(struct
+@@ -2056,7 +2057,31 @@ static int ath11k_init_hw_params(struct
  
  	ab->hw_params = *hw_params;
  
@@ -62,7 +62,8 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
 +			ab->hw_params.fw_mem_mode = 2;
 +			ab->hw_params.num_vdevs = 8;
 +			ab->hw_params.num_peers = 128;
-+			ab->hw_params.cold_boot_calib = false;
++			ab->hw_params.coldboot_cal_mm = false;
++			ab->hw_params.coldboot_cal_ftm = false;
 +		} else
 +			ath11k_info(ab, "Unsupported FW memory mode: %u\n", fw_mem_mode);
 +	}

package/kernel/mac80211/patches/subsys/337-wifi-mac80211-fix-race-condition-on-enabling-fast-xm.patch

@@ -0,0 +1,34 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 3 Jan 2024 15:10:18 +0100
+Subject: [PATCH] wifi: mac80211: fix race condition on enabling fast-xmit
+
+fast-xmit must only be enabled after the sta has been uploaded to the driver,
+otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls
+to the driver, leading to potential crashes because of uninitialized drv_priv
+data.
+Add a missing sta->uploaded check and re-check fast xmit after inserting a sta.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/mac80211/sta_info.c
++++ b/net/mac80211/sta_info.c
+@@ -886,6 +886,7 @@ static int sta_info_insert_finish(struct
+ 
+ 	if (ieee80211_vif_is_mesh(&sdata->vif))
+ 		mesh_accept_plinks_update(sdata);
++	ieee80211_check_fast_xmit(sta);
+ 
+ 	return 0;
+  out_remove:
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -3041,7 +3041,7 @@ void ieee80211_check_fast_xmit(struct st
+ 	    sdata->vif.type == NL80211_IFTYPE_STATION)
+ 		goto out;
+ 
+-	if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED))
++	if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED) || !sta->uploaded)
+ 		goto out;
+ 
+ 	if (test_sta_flag(sta, WLAN_STA_PS_STA) ||

package/kernel/mac80211/patches/subsys/780-avoid-crashing-missing-band.patch

@@ -0,0 +1,34 @@
+From: David Bauer <mail@david-bauer.net>
+Date: Thu, 30 Nov 2023 07:32:52 +0100
+Subject: [PATCH] mac80211: avoid crashing on invalid band info
+
+Frequent crashes have been observed on MT7916 based platforms. While the
+root of these crashes are currently unknown, they happen when decoding
+rate information of connected STAs in AP mode. The rate-information is
+associated with a band which is not available on the PHY.
+
+Check for this condition in order to avoid crashing the whole system.
+This patch should be removed once the roout cause has been found and
+fixed.
+
+Link: https://github.com/freifunk-gluon/gluon/issues/2980
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+
+--- a/net/mac80211/sta_info.c
++++ b/net/mac80211/sta_info.c
+@@ -2422,6 +2422,13 @@ static void sta_stats_decode_rate(struct
+ 
+ 		sband = local->hw.wiphy->bands[band];
+ 
++		if (!sband) {
++			wiphy_warn(local->hw.wiphy,
++				    "Invalid band %d\n",
++				    band);
++			break;
++		}
++
+ 		if (WARN_ON_ONCE(!sband->bitrates))
+ 			break;
+ 

package/kernel/mt76/Makefile

@@ -8,9 +8,9 @@ PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/openwrt/mt76
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2023-08-14
-PKG_SOURCE_VERSION:=b14c2351ddb8601c322576d84029e463d456caef
-PKG_MIRROR_HASH:=62b5e157ad525424b6857e77ed373e8d39d03af71b057f8b309d8b293d6eac5f
+PKG_SOURCE_DATE:=2023-09-11
+PKG_SOURCE_VERSION:=f1e1e67d97d1e9a8bb01b59ab20c45ebc985a958
+PKG_MIRROR_HASH:=41fde79de5bec3aaafdb64658475a1fa99bc483b8122e6aad9b2aa8aa8edfce6
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 PKG_USE_NINJA:=0
@@ -262,6 +262,11 @@ define KernelPackage/mt7921-firmware
   TITLE:=MediaTek MT7921 firmware
 endef
 
+define KernelPackage/mt7922-firmware
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7922 firmware
+endef
+
 define KernelPackage/mt792x-common
   $(KernelPackage/mt76-default)
   TITLE:=MediaTek MT792x wireless driver common code
@@ -542,8 +547,6 @@ define KernelPackage/mt7986-firmware/install
 		$(PKG_BUILD_DIR)/firmware/mt7986_wm.bin \
 		$(PKG_BUILD_DIR)/firmware/mt7986_rom_patch_mt7975.bin \
 		$(PKG_BUILD_DIR)/firmware/mt7986_rom_patch.bin \
-		$(PKG_BUILD_DIR)/firmware/mt7986_eeprom_mt7975_dual.bin \
-		$(PKG_BUILD_DIR)/firmware/mt7986_eeprom_mt7976_dual.bin \
 		$(1)/lib/firmware/mediatek
 endef
 
@@ -555,6 +558,14 @@ define KernelPackage/mt7921-firmware/install
 		$(1)/lib/firmware/mediatek
 endef
 
+define KernelPackage/mt7922-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/WIFI_MT7922_patch_mcu_1_1_hdr.bin \
+		$(PKG_BUILD_DIR)/firmware/WIFI_RAM_CODE_MT7922_1.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
 define Package/mt76-test/install
 	mkdir -p $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/tools/mt76-test $(1)/usr/sbin
@@ -588,6 +599,7 @@ $(eval $(call KernelPackage,mt7916-firmware))
 $(eval $(call KernelPackage,mt7981-firmware))
 $(eval $(call KernelPackage,mt7986-firmware))
 $(eval $(call KernelPackage,mt7921-firmware))
+$(eval $(call KernelPackage,mt7922-firmware))
 $(eval $(call KernelPackage,mt792x-common))
 $(eval $(call KernelPackage,mt792x-usb))
 $(eval $(call KernelPackage,mt7921-common))

package/kernel/mwlwifi/Makefile

@@ -15,9 +15,9 @@ PKG_LICENSE_FILES:=
 
 PKG_SOURCE_URL:=https://github.com/kaloz/mwlwifi
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2023-04-29
-PKG_SOURCE_VERSION:=6a436714d2ea0d0adf39fc4d7d45e6a17fcc9371
-PKG_MIRROR_HASH:=dcc320a8f859b732ff65c7ded0b5199a625bfba05a775a6bed15ed3c10cb2748
+PKG_SOURCE_DATE:=2023-11-20
+PKG_SOURCE_VERSION:=2a5a4ae31a2ad1b432a1dcb6ef6c3298e3330b2c
+PKG_MIRROR_HASH:=b1151051ed6eba063c05916d8dbc4f03f804772d217e8c65b7baa263ded7a961
 
 PKG_MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
 PKG_BUILD_PARALLEL:=1

package/kernel/mwlwifi/patches/001-Fix-compilation-warning-with-64-bit-system.patch

@@ -117,11 +117,9 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  hif/pcie/tx_ndp.c | 2 +-
  4 files changed, 5 insertions(+), 5 deletions(-)
 
-diff --git a/debugfs.c b/debugfs.c
-index 39b09fd..42efd28 100644
 --- a/debugfs.c
 +++ b/debugfs.c
-@@ -1332,7 +1332,7 @@ done:
+@@ -1342,7 +1342,7 @@ done:
  				 priv->reg_value);
  	else
  		len += scnprintf(p + len, size - len,
@@ -130,11 +128,9 @@ index 39b09fd..42efd28 100644
  				 ret, priv->reg_type, priv->reg_offset,
  				 priv->reg_value);
  
-diff --git a/hif/fwcmd.c b/hif/fwcmd.c
-index 376b58f..582c8d2 100644
 --- a/hif/fwcmd.c
 +++ b/hif/fwcmd.c
-@@ -3604,7 +3604,7 @@ int mwl_fwcmd_get_fw_core_dump(struct ieee80211_hw *hw,
+@@ -3623,7 +3623,7 @@ int mwl_fwcmd_get_fw_core_dump(struct ie
  	core_dump->size_kb = pcmd->cmd_data.coredump.size_kb;
  	core_dump->flags = pcmd->cmd_data.coredump.flags;
  	memcpy(buff,
@@ -143,11 +139,20 @@ index 376b58f..582c8d2 100644
  	       sizeof(struct hostcmd_cmd_get_fw_core_dump) -
  	       sizeof(struct hostcmd_cmd_get_fw_core_dump_)),
  	       MAX_CORE_DUMP_BUFFER);
-diff --git a/hif/pcie/pcie.c b/hif/pcie/pcie.c
-index 24453b6..5b6c633 100644
+--- a/hif/pcie/8964/tx_ndp.c
++++ b/hif/pcie/8964/tx_ndp.c
+@@ -336,7 +336,7 @@ int pcie_tx_init_ndp(struct ieee80211_hw
+ 
+ 	if (sizeof(struct pcie_tx_ctrl_ndp) >
+ 	    sizeof(tx_info->driver_data)) {
+-		wiphy_err(hw->wiphy, "driver data is not enough: %d (%d)\n",
++		wiphy_err(hw->wiphy, "driver data is not enough: %zu (%zu)\n",
+ 			  sizeof(struct pcie_tx_ctrl_ndp),
+ 			  sizeof(tx_info->driver_data));
+ 		return -ENOMEM;
 --- a/hif/pcie/pcie.c
 +++ b/hif/pcie/pcie.c
-@@ -1320,8 +1320,8 @@ static void pcie_bf_mimo_ctrl_decode(struct mwl_priv *priv,
+@@ -1464,8 +1464,8 @@ static void pcie_bf_mimo_ctrl_decode(str
  			       &fp_data->f_pos);
  		filp_close(fp_data, current->files);
  	} else {
@@ -158,19 +163,3 @@ index 24453b6..5b6c633 100644
  	}
  
  #if LINUX_VERSION_CODE < KERNEL_VERSION(5,10,0)
-diff --git a/hif/pcie/tx_ndp.c b/hif/pcie/tx_ndp.c
-index 6758cde..3140a2e 100644
---- a/hif/pcie/tx_ndp.c
-+++ b/hif/pcie/tx_ndp.c
-@@ -335,7 +335,7 @@ int pcie_tx_init_ndp(struct ieee80211_hw *hw)
- 
- 	if (sizeof(struct pcie_tx_ctrl_ndp) >
- 	    sizeof(tx_info->status.status_driver_data)) {
--		wiphy_err(hw->wiphy, "driver data is not enough: %d (%d)\n",
-+		wiphy_err(hw->wiphy, "driver data is not enough: %zu (%zu)\n",
- 			  sizeof(struct pcie_tx_ctrl_ndp),
- 			  sizeof(tx_info->status.status_driver_data));
- 		return -ENOMEM;
--- 
-2.39.2
-

package/kernel/mwlwifi/patches/004-mwlwifi-fix-PCIe-DT-node-null-pointer-dereference.patch

@@ -19,7 +19,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 
 --- a/hif/pcie/pcie.c
 +++ b/hif/pcie/pcie.c
-@@ -573,7 +573,8 @@ static struct device_node *pcie_get_devi
+@@ -685,7 +685,8 @@ static struct device_node *pcie_get_devi
  	struct device_node *dev_node;
  
  	dev_node = pci_bus_to_OF_node(pcie_priv->pdev->bus);

package/kernel/mwlwifi/patches/005-mac80211_update.patch

@@ -1,6 +1,6 @@
 --- a/core.c
 +++ b/core.c
-@@ -706,7 +706,7 @@ static void mwl_chnl_switch_event(struct
+@@ -718,7 +718,7 @@ static void mwl_chnl_switch_event(struct
  		vif = container_of((void *)mwl_vif, struct ieee80211_vif,
  				   drv_priv);
  
@@ -11,7 +11,7 @@
  	spin_unlock_bh(&priv->vif_lock);
 --- a/debugfs.c
 +++ b/debugfs.c
-@@ -455,9 +455,9 @@ static ssize_t mwl_debugfs_vif_read(stru
+@@ -498,9 +498,9 @@ static ssize_t mwl_debugfs_vif_read(stru
  		switch (vif->type) {
  		case NL80211_IFTYPE_AP:
  			len += scnprintf(p + len, size - len, "type: ap\n");
@@ -24,7 +24,7 @@
  			len += scnprintf(p + len, size - len,
  					 "ssid: %s\n", ssid);
  			len += scnprintf(p + len, size - len,
-@@ -479,8 +479,8 @@ static ssize_t mwl_debugfs_vif_read(stru
+@@ -522,8 +522,8 @@ static ssize_t mwl_debugfs_vif_read(stru
  					 "type: unknown\n");
  			break;
  		}
@@ -35,62 +35,58 @@
  			len += scnprintf(p + len, size - len,
  					 "channel: %d: width: %d\n",
  					 chan_def->chan->hw_value,
-@@ -564,28 +564,28 @@ static ssize_t mwl_debugfs_sta_read(stru
- 					 "amsdu cap: 0x%02x\n",
- 					 sta_info->amsdu_ctrl.cap);
- 		}
--		if (sta->ht_cap.ht_supported) {
-+		if (sta->deflink.ht_cap.ht_supported) {
- 			len += scnprintf(p + len, size - len,
- 					 "ht_cap: 0x%04x, ampdu: %02x, %02x\n",
--					 sta->ht_cap.cap,
--					 sta->ht_cap.ampdu_factor,
--					 sta->ht_cap.ampdu_density);
-+					 sta->deflink.ht_cap.cap,
-+					 sta->deflink.ht_cap.ampdu_factor,
-+					 sta->deflink.ht_cap.ampdu_density);
- 			len += scnprintf(p + len, size - len,
- 					 "rx_mask: 0x%02x, %02x, %02x, %02x\n",
--					 sta->ht_cap.mcs.rx_mask[0],
--					 sta->ht_cap.mcs.rx_mask[1],
--					 sta->ht_cap.mcs.rx_mask[2],
--					 sta->ht_cap.mcs.rx_mask[3]);
-+					 sta->deflink.ht_cap.mcs.rx_mask[0],
-+					 sta->deflink.ht_cap.mcs.rx_mask[1],
-+					 sta->deflink.ht_cap.mcs.rx_mask[2],
-+					 sta->deflink.ht_cap.mcs.rx_mask[3]);
- 		}
--		if (sta->vht_cap.vht_supported) {
-+		if (sta->deflink.vht_cap.vht_supported) {
- 			len += scnprintf(p + len, size - len,
- 					 "vht_cap: 0x%08x, mcs: %02x, %02x\n",
--					 sta->vht_cap.cap,
--					 sta->vht_cap.vht_mcs.rx_mcs_map,
--					 sta->vht_cap.vht_mcs.tx_mcs_map);
-+					 sta->deflink.vht_cap.cap,
-+					 sta->deflink.vht_cap.vht_mcs.rx_mcs_map,
-+					 sta->deflink.vht_cap.vht_mcs.tx_mcs_map);
- 		}
- 		len += scnprintf(p + len, size - len, "rx_bw: %d, rx_nss: %d\n",
--				 sta->bandwidth, sta->rx_nss);
-+				 sta->deflink.bandwidth, sta->deflink.rx_nss);
- 		len += scnprintf(p + len, size - len,
- 				 "tdls: %d, tdls_init: %d\n",
- 				 sta->tdls, sta->tdls_initiator);
+@@ -596,18 +596,18 @@ static ssize_t mwl_debugfs_sta_read(stru
+ 			sta_info->wds ? "true" : "false",
+ 			sta_info->ba_hist.enable ? "enable" : "disable",
+ 			sta_info->is_amsdu_allowed ? sta_info->amsdu_ctrl.cap : 0 ,
+-			sta->ht_cap.ht_supported ? sta->ht_cap.cap : 0,
+-			sta->ht_cap.ht_supported ? sta->ht_cap.ampdu_factor : 0,
+-			sta->ht_cap.ht_supported ? sta->ht_cap.ampdu_density : 0,
+-			sta->ht_cap.ht_supported ? sta->ht_cap.mcs.rx_mask[0] : 0,
+-			sta->ht_cap.ht_supported ? sta->ht_cap.mcs.rx_mask[1] : 0,
+-			sta->ht_cap.ht_supported ? sta->ht_cap.mcs.rx_mask[2] : 0,
+-			sta->ht_cap.ht_supported ? sta->ht_cap.mcs.rx_mask[3] : 0,
+-			sta->vht_cap.vht_supported ? sta->vht_cap.cap : 0,
+-			sta->vht_cap.vht_supported ? sta->vht_cap.vht_mcs.rx_mcs_map : 0,
+-			sta->vht_cap.vht_supported ? sta->vht_cap.vht_mcs.tx_mcs_map : 0,
+-			sta->bandwidth,
+-			sta->rx_nss,
++			sta->deflink.ht_cap.ht_supported ? sta->deflink.ht_cap.cap : 0,
++			sta->deflink.ht_cap.ht_supported ? sta->deflink.ht_cap.ampdu_factor : 0,
++			sta->deflink.ht_cap.ht_supported ? sta->deflink.ht_cap.ampdu_density : 0,
++			sta->deflink.ht_cap.ht_supported ? sta->deflink.ht_cap.mcs.rx_mask[0] : 0,
++			sta->deflink.ht_cap.ht_supported ? sta->deflink.ht_cap.mcs.rx_mask[1] : 0,
++			sta->deflink.ht_cap.ht_supported ? sta->deflink.ht_cap.mcs.rx_mask[2] : 0,
++			sta->deflink.ht_cap.ht_supported ? sta->deflink.ht_cap.mcs.rx_mask[3] : 0,
++			sta->deflink.vht_cap.vht_supported ? sta->deflink.vht_cap.cap : 0,
++			sta->deflink.vht_cap.vht_supported ? sta->deflink.vht_cap.vht_mcs.rx_mcs_map : 0,
++			sta->deflink.vht_cap.vht_supported ? sta->deflink.vht_cap.vht_mcs.tx_mcs_map : 0,
++			sta->deflink.bandwidth,
++			sta->deflink.rx_nss,
+ 			sta->tdls,
+ 			sta->tdls_initiator,
+ 			sta->wme,
 --- a/hif/fwcmd.c
 +++ b/hif/fwcmd.c
-@@ -634,8 +634,9 @@ einval:
+@@ -633,11 +633,15 @@ einval:
+ }
  
  static int mwl_fwcmd_set_ap_beacon(struct mwl_priv *priv,
- 				   struct mwl_vif *mwl_vif,
+-				   struct mwl_vif *mwl_vif,
 -				   struct ieee80211_bss_conf *bss_conf)
 +				   struct ieee80211_vif *vif)
  {
-+	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
  	struct hostcmd_cmd_ap_beacon *pcmd;
  	struct ds_params *phy_ds_param_set;
++	struct mwl_vif *mwl_vif;
++	struct ieee80211_bss_conf *bss_conf;
++
++	mwl_vif = mwl_dev_get_vif(vif);
++	bss_conf = &vif->bss_conf;
  
-@@ -664,7 +665,7 @@ static int mwl_fwcmd_set_ap_beacon(struc
+ 	/* wmm structure of start command is defined less one byte,
+ 	 * due to following field country is not used, add byte one
+@@ -664,7 +668,7 @@ static int mwl_fwcmd_set_ap_beacon(struc
  	pcmd->cmd_hdr.macid = mwl_vif->macid;
  
  	ether_addr_copy(pcmd->start_cmd.sta_mac_addr, mwl_vif->bssid);
@@ -99,16 +95,16 @@
  	if (priv->chip_type == MWL8997)
  		ether_addr_copy(pcmd->start_cmd.bssid, mwl_vif->bssid);
  	pcmd->start_cmd.bss_type = 1;
-@@ -2091,7 +2092,7 @@ int mwl_fwcmd_set_beacon(struct ieee8021
+@@ -2090,7 +2094,7 @@ int mwl_fwcmd_set_beacon(struct ieee8021
  	if (mwl_fwcmd_set_wsc_ie(hw, b_inf->ie_wsc_len, b_inf->ie_wsc_ptr))
  		goto err;
  
 -	if (mwl_fwcmd_set_ap_beacon(priv, mwl_vif, &vif->bss_conf))
-+	if (mwl_fwcmd_set_ap_beacon(priv, mwl_vif, vif))
++	if (mwl_fwcmd_set_ap_beacon(priv, vif))
  		goto err;
  
  	if (b_inf->cap_info & WLAN_CAPABILITY_SPECTRUM_MGMT)
-@@ -2153,38 +2154,38 @@ int mwl_fwcmd_set_new_stn_add(struct iee
+@@ -2152,38 +2156,38 @@ int mwl_fwcmd_set_new_stn_add(struct iee
  	ether_addr_copy(pcmd->mac_addr, sta->addr);
  
  	if (hw->conf.chandef.chan->band == NL80211_BAND_2GHZ)
@@ -161,7 +157,7 @@
  	}
  
  	pcmd->is_qos_sta = sta->wme;
-@@ -2240,38 +2241,38 @@ int mwl_fwcmd_set_new_stn_add_sc4(struct
+@@ -2239,38 +2243,38 @@ int mwl_fwcmd_set_new_stn_add_sc4(struct
  	ether_addr_copy(pcmd->mac_addr, sta->addr);
  
  	if (hw->conf.chandef.chan->band == NL80211_BAND_2GHZ)
@@ -214,7 +210,7 @@
  	}
  
  	pcmd->is_qos_sta = sta->wme;
-@@ -2788,9 +2789,9 @@ int mwl_fwcmd_create_ba(struct ieee80211
+@@ -2787,9 +2791,9 @@ int mwl_fwcmd_create_ba(struct ieee80211
  	pcmd->ba_info.create_params.flags = cpu_to_le32(ba_flags);
  	pcmd->ba_info.create_params.queue_id = stream->idx;
  	pcmd->ba_info.create_params.param_info =
@@ -226,7 +222,7 @@
  		 IEEE80211_HT_AMPDU_PARM_DENSITY);
  	if (direction == BA_FLAG_DIRECTION_UP) {
  		pcmd->ba_info.create_params.reset_seq_no = 0;
-@@ -2800,9 +2801,9 @@ int mwl_fwcmd_create_ba(struct ieee80211
+@@ -2799,9 +2803,9 @@ int mwl_fwcmd_create_ba(struct ieee80211
  		pcmd->ba_info.create_params.current_seq = cpu_to_le16(0);
  	}
  	if (priv->chip_type == MWL8964 &&
@@ -238,9 +234,51 @@
  			IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >>
  			IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT);
  	}
+--- a/hif/pcie/8864/tx.c
++++ b/hif/pcie/8864/tx.c
+@@ -743,7 +743,7 @@ void pcie_8864_tx_xmit(struct ieee80211_
+ 	index = SYSADPT_TX_WMM_QUEUES - index - 1;
+ 	txpriority = index;
+ 
+-	if (sta && sta->ht_cap.ht_supported &&
++	if (sta && sta->deflink.ht_cap.ht_supported &&
+ 	  !(xmitcontrol & EAGLE_TXD_XMITCTRL_USE_MC_RATE) &&
+ 	    ieee80211_is_data_qos(wh->frame_control)) {
+ 		tid = qos & 0xf;
+--- a/hif/pcie/8964/tx_ndp.c
++++ b/hif/pcie/8964/tx_ndp.c
+@@ -607,7 +607,7 @@ void pcie_tx_xmit_ndp(struct ieee80211_h
+ 		pcie_tx_encapsulate_frame(priv, skb, k_conf);
+ 	} else {
+ 		tid = qos & 0x7;
+-		if (sta && sta->ht_cap.ht_supported && !eapol_frame &&
++		if (sta && sta->deflink.ht_cap.ht_supported && !eapol_frame &&
+ 		    qos != 0xFFFF) {
+ 			pcie_tx_count_packet(sta, tid);
+ 			spin_lock_bh(&priv->stream_lock);
+--- a/hif/pcie/8997/tx.c
++++ b/hif/pcie/8997/tx.c
+@@ -81,7 +81,7 @@ static int pcie_txbd_ring_create(struct
+ 	wiphy_info(priv->hw->wiphy,
+ 		   "TX ring: - base: %p, pbase: 0x%x, len: %d\n",
+ 		   pcie_priv->txbd_ring_vbase,
+-		   pcie_priv->txbd_ring_pbase,
++		   (u32)pcie_priv->txbd_ring_pbase,
+ 		   pcie_priv->txbd_ring_size);
+ 
+ 	for (num = 0; num < PCIE_MAX_TXRX_BD; num++) {
+@@ -694,7 +694,7 @@ void pcie_8997_tx_xmit(struct ieee80211_
+ 	index = SYSADPT_TX_WMM_QUEUES - index - 1;
+ 	txpriority = index;
+ 
+-	if (sta && sta->ht_cap.ht_supported &&
++	if (sta && sta->deflink.ht_cap.ht_supported &&
+ 	  !(xmitcontrol & EAGLE_TXD_XMITCTRL_USE_MC_RATE) &&
+ 	    ieee80211_is_data_qos(wh->frame_control)) {
+ 		tid = qos & 0xf;
 --- a/mac80211.c
 +++ b/mac80211.c
-@@ -371,15 +371,15 @@ static void mwl_mac80211_bss_info_change
+@@ -368,15 +368,15 @@ static void mwl_mac80211_bss_info_change
  		}
  	}
  
@@ -259,7 +297,7 @@
  {
  	struct mwl_priv *priv = hw->priv;
  	struct mwl_vif *mwl_vif;
-@@ -429,8 +429,8 @@ static void mwl_mac80211_bss_info_change
+@@ -426,8 +426,8 @@ static void mwl_mac80211_bss_info_change
  	if (changed & (BSS_CHANGED_BEACON_INT | BSS_CHANGED_BEACON)) {
  		struct sk_buff *skb;
  
@@ -270,7 +308,7 @@
  		    (!info->hidden_ssid)) {
  			if (mwl_vif->broadcast_ssid != true) {
  				mwl_fwcmd_broadcast_ssid_enable(hw, vif, true);
-@@ -444,7 +444,7 @@ static void mwl_mac80211_bss_info_change
+@@ -441,7 +441,7 @@ static void mwl_mac80211_bss_info_change
  		}
  
  		if (!mwl_vif->set_beacon) {
@@ -279,7 +317,7 @@
  
  			if (skb) {
  				mwl_fwcmd_set_beacon(hw, vif, skb->data, skb->len);
-@@ -461,7 +461,7 @@ static void mwl_mac80211_bss_info_change
+@@ -458,7 +458,7 @@ static void mwl_mac80211_bss_info_change
  static void mwl_mac80211_bss_info_changed(struct ieee80211_hw *hw,
  					  struct ieee80211_vif *vif,
  					  struct ieee80211_bss_conf *info,
@@ -288,7 +326,7 @@
  {
  	switch (vif->type) {
  	case NL80211_IFTYPE_AP:
-@@ -584,10 +584,10 @@ static int mwl_mac80211_sta_add(struct i
+@@ -583,10 +583,10 @@ static int mwl_mac80211_sta_add(struct i
  	if (vif->type == NL80211_IFTYPE_MESH_POINT)
  		sta_info->is_mesh_node = true;
  
@@ -296,12 +334,12 @@
 +	if (sta->deflink.ht_cap.ht_supported) {
  		sta_info->is_ampdu_allowed = true;
  		sta_info->is_amsdu_allowed = false;
--		if (sta->ht_cap.cap & IEEE80211_HT_CAP_MAX_AMSDU)
-+		if (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_MAX_AMSDU)
+-		if (sta->ht_cap.cap & IEEE80211_HT_CAP_MAX_AMSDU) {
++		if (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_MAX_AMSDU) {
  			sta_info->amsdu_ctrl.cap = MWL_AMSDU_SIZE_8K;
- 		else
- 			sta_info->amsdu_ctrl.cap = MWL_AMSDU_SIZE_4K;
-@@ -669,7 +669,7 @@ static int mwl_mac80211_sta_remove(struc
+ 			sta_info->amsdu_ctrl.amsdu_allow_size = SYSADPT_AMSDU_8K_MAX_SIZE;
+ 		}
+@@ -670,7 +670,7 @@ static int mwl_mac80211_sta_remove(struc
  
  static int mwl_mac80211_conf_tx(struct ieee80211_hw *hw,
  				struct ieee80211_vif *vif,
@@ -310,7 +348,7 @@
  				const struct ieee80211_tx_queue_params *params)
  {
  	struct mwl_priv *priv = hw->priv;
-@@ -928,4 +928,5 @@ const struct ieee80211_ops mwl_mac80211_
+@@ -934,4 +934,5 @@ const struct ieee80211_ops mwl_mac80211_
  	.pre_channel_switch = mwl_mac80211_chnl_switch,
  	.sw_scan_start      = mwl_mac80211_sw_scan_start,
  	.sw_scan_complete   = mwl_mac80211_sw_scan_complete,
@@ -360,34 +398,3 @@
  
  	switch (format) {
  	case TX_RATE_FORMAT_LEGACY:
---- a/hif/pcie/tx.c
-+++ b/hif/pcie/tx.c
-@@ -153,7 +153,7 @@ static int pcie_txbd_ring_create(struct
- 	wiphy_info(priv->hw->wiphy,
- 		   "TX ring: - base: %p, pbase: 0x%x, len: %d\n",
- 		   pcie_priv->txbd_ring_vbase,
--		   pcie_priv->txbd_ring_pbase,
-+		   (u32)pcie_priv->txbd_ring_pbase,
- 		   pcie_priv->txbd_ring_size);
- 
- 	for (num = 0; num < PCIE_MAX_TXRX_BD; num++) {
-@@ -1091,7 +1091,7 @@ void pcie_tx_xmit(struct ieee80211_hw *h
- 	index = SYSADPT_TX_WMM_QUEUES - index - 1;
- 	txpriority = index;
- 
--	if (sta && sta->ht_cap.ht_supported && !eapol_frame &&
-+	if (sta && sta->deflink.ht_cap.ht_supported && !eapol_frame &&
- 	    ieee80211_is_data_qos(wh->frame_control)) {
- 		tid = qos & 0xf;
- 		pcie_tx_count_packet(sta, tid);
---- a/hif/pcie/tx_ndp.c
-+++ b/hif/pcie/tx_ndp.c
-@@ -602,7 +602,7 @@ void pcie_tx_xmit_ndp(struct ieee80211_h
- 		pcie_tx_encapsulate_frame(priv, skb, k_conf, NULL);
- 	} else {
- 		tid = qos & 0x7;
--		if (sta && sta->ht_cap.ht_supported && !eapol_frame &&
-+		if (sta && sta->deflink.ht_cap.ht_supported && !eapol_frame &&
- 		    qos != 0xFFFF) {
- 			pcie_tx_count_packet(sta, tid);
- 			spin_lock_bh(&priv->stream_lock);

package/kernel/mwlwifi/patches/006-remove-uaccess-and-get_fs-calls-from-PCIe-for-Kenel-.patch

@@ -0,0 +1,51 @@
+From ad911365cac3723d1c00d048905a5e22ff4a10f3 Mon Sep 17 00:00:00 2001
+From: Stefan Kalscheuer <stefan@stklcode.de>
+Date: Sun, 18 Jun 2023 17:53:27 +0200
+Subject: [PATCH 1/2] remove uaccess and get_fs calls from PCIe for Kenel >=
+ 5.18
+
+Remove the calls to deprecated get_fs and force_uaccess_* API for modern
+kernels.
+
+The get_fs functionality and the transitional force_uaccess_* calls have
+been removed Kernel 5.18 [1] while read and write operations have been
+refactored, so the code can work on kernel- and userspace data without
+the need to shifting the boundary using set_fs().
+
+[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=967747bbc084b93b54e66f9047d342232314cd25
+
+Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
+---
+ hif/pcie/pcie.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/hif/pcie/pcie.c
++++ b/hif/pcie/pcie.c
+@@ -1439,7 +1439,9 @@ static void pcie_bf_mimo_ctrl_decode(str
+ 	const char filename[] = "/tmp/BF_MIMO_Ctrl_Field_Output.txt";
+ 	char str_buf[256];
+ 	char *buf = &str_buf[0];
++#if LINUX_VERSION_CODE < KERNEL_VERSION(5,18,0)
+ 	mm_segment_t oldfs;
++#endif
+ 
+ #if LINUX_VERSION_CODE < KERNEL_VERSION(5,0,0)
+ 	oldfs = get_fs();
+@@ -1447,7 +1449,7 @@ static void pcie_bf_mimo_ctrl_decode(str
+ #elif LINUX_VERSION_CODE < KERNEL_VERSION(5,10,0)
+ 	oldfs = get_fs();
+ 	set_fs(KERNEL_DS);
+-#else
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(5,18,0)
+ 	oldfs = force_uaccess_begin();
+ #endif
+ 
+@@ -1471,7 +1473,7 @@ static void pcie_bf_mimo_ctrl_decode(str
+ 
+ #if LINUX_VERSION_CODE < KERNEL_VERSION(5,10,0)
+ 	set_fs(oldfs);
+-#else
++#elif LINUX_VERSION_CODE < KERNEL_VERSION(5,18,0)
+ 	force_uaccess_end(oldfs);
+ #endif
+ }

package/kernel/mwlwifi/patches/007-replace-usage-of-the-deprecated-pci-dma-compat.h-API.patch

@@ -0,0 +1,352 @@
+From 61c75dce424c180b633c64613a1948df5a41cf1e Mon Sep 17 00:00:00 2001
+From: Stefan Kalscheuer <stefan@stklcode.de>
+Date: Sun, 18 Jun 2023 17:59:07 +0200
+Subject: [PATCH 2/2] replace usage of the deprecated "pci-dma-compat.h" API
+
+The pci-dma-compat API has been legacy for quite a while and was removed
+with 5.18 [1]. Migrate all calls, so the module can be compiled against
+modern kernel versions.
+
+Replace some compat calls:
+* pci_set_dma_mask with dma_set_mask
+* pci_(un)map_single with dma_(un)map_single
+* pci_dma_mapping_error with dma_mapping_error
+* PCI_DMA_{FROM,TO}DEVICE with DMA_{FOM,TO}_DEVICE
+
+[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7968778914e53788a01c2dee2692cab157de9ac0
+
+Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
+---
+ hif/pcie/pcie.c   |  2 +-
+ hif/pcie/rx.c     | 20 ++++++++++----------
+ hif/pcie/rx_ndp.c | 20 ++++++++++----------
+ hif/pcie/tx.c     | 22 +++++++++++-----------
+ hif/pcie/tx_ndp.c | 14 +++++++-------
+ 5 files changed, 39 insertions(+), 39 deletions(-)
+
+--- a/hif/pcie/pcie.c
++++ b/hif/pcie/pcie.c
+@@ -1701,7 +1701,7 @@ static int pcie_probe(struct pci_dev *pd
+ 		return rc;
+ 	}
+ 
+-	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
++	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ 	if (rc) {
+ 		pr_err("%s: 32-bit PCI DMA not supported\n",
+ 		       PCIE_DRV_NAME);
+--- a/hif/pcie/8864/rx.c
++++ b/hif/pcie/8864/rx.c
+@@ -107,11 +107,11 @@ static int pcie_rx_ring_init(struct mwl_
+ 			desc->prx_ring[i].rssi = 0x00;
+ 			desc->prx_ring[i].pkt_len =
+ 				cpu_to_le16(SYSADPT_MAX_AGGR_SIZE);
+-			dma = pci_map_single(pcie_priv->pdev,
++			dma = dma_map_single(&(pcie_priv->pdev)->dev,
+ 					     rx_hndl->psk_buff->data,
+ 					     desc->rx_buf_size,
+-					     PCI_DMA_FROMDEVICE);
+-			if (pci_dma_mapping_error(pcie_priv->pdev, dma)) {
++					     DMA_FROM_DEVICE);
++			if (dma_mapping_error(&(pcie_priv->pdev)->dev, dma)) {
+ 				wiphy_err(priv->hw->wiphy,
+ 					  "failed to map pci memory!\n");
+ 				return -ENOMEM;
+@@ -153,11 +153,11 @@ static void pcie_rx_ring_cleanup(struct
+ 			if (!rx_hndl->psk_buff)
+ 				continue;
+ 
+-			pci_unmap_single(pcie_priv->pdev,
++			dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 					 le32_to_cpu
+ 					 (rx_hndl->pdesc->pphys_buff_data),
+ 					 desc->rx_buf_size,
+-					 PCI_DMA_FROMDEVICE);
++					 DMA_FROM_DEVICE);
+ 
+ 			dev_kfree_skb_any(rx_hndl->psk_buff);
+ 
+@@ -332,11 +332,11 @@ static inline int pcie_rx_refill(struct
+ 	rx_hndl->pdesc->rssi = 0x00;
+ 	rx_hndl->pdesc->pkt_len = cpu_to_le16(desc->rx_buf_size);
+ 
+-	dma = pci_map_single(pcie_priv->pdev,
++	dma = dma_map_single(&pcie_priv->pdev->dev,
+ 			     rx_hndl->psk_buff->data,
+ 			     desc->rx_buf_size,
+-			     PCI_DMA_FROMDEVICE);
+-	if (pci_dma_mapping_error(pcie_priv->pdev, dma)) {
++			     DMA_FROM_DEVICE);
++	if (dma_mapping_error(&(pcie_priv->pdev)->dev, dma)) {
+ 		dev_kfree_skb_any(rx_hndl->psk_buff);
+ 		wiphy_err(priv->hw->wiphy,
+ 			  "failed to map pci memory!\n");
+@@ -410,10 +410,10 @@ void pcie_8864_rx_recv(unsigned long dat
+ 		prx_skb = curr_hndl->psk_buff;
+ 		if (!prx_skb)
+ 			goto out;
+-		pci_unmap_single(pcie_priv->pdev,
++		dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 				 le32_to_cpu(curr_hndl->pdesc->pphys_buff_data),
+ 				 desc->rx_buf_size,
+-				 PCI_DMA_FROMDEVICE);
++				 DMA_FROM_DEVICE);
+ 		pkt_len = le16_to_cpu(curr_hndl->pdesc->pkt_len);
+ 
+ 		if (skb_tailroom(prx_skb) < pkt_len) {
+--- a/hif/pcie/8864/tx.c
++++ b/hif/pcie/8864/tx.c
+@@ -171,11 +171,11 @@ static void pcie_tx_ring_cleanup(struct
+ 					    desc->tx_hndl[i].psk_buff->data,
+ 					    le32_to_cpu(
+ 					    desc->ptx_ring[i].pkt_ptr));
+-				pci_unmap_single(pcie_priv->pdev,
++				dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 						 le32_to_cpu(
+ 						 desc->ptx_ring[i].pkt_ptr),
+ 						 desc->tx_hndl[i].psk_buff->len,
+-						 PCI_DMA_TODEVICE);
++						 DMA_TO_DEVICE);
+ 				dev_kfree_skb_any(desc->tx_hndl[i].psk_buff);
+ 				desc->ptx_ring[i].status =
+ 					cpu_to_le32(EAGLE_TXD_STATUS_IDLE);
+@@ -291,9 +291,9 @@ static inline void pcie_tx_skb(struct mw
+ 	tx_desc->type = tx_ctrl->type;
+ 	tx_desc->xmit_control = tx_ctrl->xmit_control;
+ 	tx_desc->sap_pkt_info = 0;
+-	dma = pci_map_single(pcie_priv->pdev, tx_skb->data,
+-			     tx_skb->len, PCI_DMA_TODEVICE);
+-	if (pci_dma_mapping_error(pcie_priv->pdev, dma)) {
++	dma = dma_map_single(&(pcie_priv->pdev)->dev, tx_skb->data,
++			     tx_skb->len, DMA_TO_DEVICE);
++	if (dma_mapping_error(&(pcie_priv->pdev)->dev, dma)) {
+ 		dev_kfree_skb_any(tx_skb);
+ 		wiphy_err(priv->hw->wiphy,
+ 			  "failed to map pci memory!\n");
+@@ -447,10 +447,10 @@ static void pcie_non_pfu_tx_done(struct
+ 		       (tx_desc->status & cpu_to_le32(EAGLE_TXD_STATUS_OK)) &&
+ 		       (!(tx_desc->status &
+ 		       cpu_to_le32(EAGLE_TXD_STATUS_FW_OWNED)))) {
+-			pci_unmap_single(pcie_priv->pdev,
++			dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 					 le32_to_cpu(tx_desc->pkt_ptr),
+ 					 le16_to_cpu(tx_desc->pkt_len),
+-					 PCI_DMA_TODEVICE);
++					 DMA_TO_DEVICE);
+ 			done_skb = tx_hndl->psk_buff;
+ 			rate = le32_to_cpu(tx_desc->rate_info);
+ 			tx_desc->pkt_ptr = 0;
+@@ -925,4 +925,4 @@ void pcie_8864_tx_del_sta_amsdu_pkts(str
+ 		}
+ 	}
+ 	spin_unlock_bh(&sta_info->amsdu_lock);
+-}
+\ No newline at end of file
++}
+--- a/hif/pcie/8964/rx_ndp.c
++++ b/hif/pcie/8964/rx_ndp.c
+@@ -86,11 +86,11 @@ static int pcie_rx_ring_init_ndp(struct
+ 			}
+ 			skb_reserve(psk_buff, MIN_BYTES_RX_HEADROOM);
+ 
+-			dma = pci_map_single(pcie_priv->pdev,
++			dma = dma_map_single(&(pcie_priv->pdev)->dev,
+ 					     psk_buff->data,
+ 					     desc->rx_buf_size,
+-					     PCI_DMA_FROMDEVICE);
+-			if (pci_dma_mapping_error(pcie_priv->pdev, dma)) {
++					     DMA_FROM_DEVICE);
++			if (dma_mapping_error(&(pcie_priv->pdev)->dev, dma)) {
+ 				wiphy_err(priv->hw->wiphy,
+ 					  "failed to map pci memory!\n");
+ 				return -ENOMEM;
+@@ -120,11 +120,11 @@ static void pcie_rx_ring_cleanup_ndp(str
+ 	if (desc->prx_ring) {
+ 		for (i = 0; i < MAX_NUM_RX_DESC; i++) {
+ 			if (desc->rx_vbuflist[i]) {
+-				pci_unmap_single(pcie_priv->pdev,
++				dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 						 le32_to_cpu(
+ 						 desc->prx_ring[i].data),
+ 						 desc->rx_buf_size,
+-						 PCI_DMA_FROMDEVICE);
++						 DMA_FROM_DEVICE);
+ 				desc->rx_vbuflist[i] = NULL;
+ 			}
+ 		}
+@@ -411,11 +411,11 @@ static inline int pcie_rx_refill_ndp(str
+ 		return -ENOMEM;
+ 	skb_reserve(psk_buff, MIN_BYTES_RX_HEADROOM);
+ 
+-	dma = pci_map_single(pcie_priv->pdev,
++	dma = dma_map_single(&(pcie_priv->pdev)->dev,
+ 			     psk_buff->data,
+ 			     desc->rx_buf_size,
+-			     PCI_DMA_FROMDEVICE);
+-	if (pci_dma_mapping_error(pcie_priv->pdev, dma)) {
++			     DMA_FROM_DEVICE);
++	if (dma_mapping_error(&(pcie_priv->pdev)->dev, dma)) {
+ 		wiphy_err(priv->hw->wiphy,
+ 			  "refill: failed to map pci memory!\n");
+ 		return -ENOMEM;
+@@ -520,10 +520,10 @@ recheck:
+ 			break;
+ 		}
+ 
+-		pci_unmap_single(pcie_priv->pdev,
++		dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 				 le32_to_cpu(prx_desc->data),
+ 				 desc->rx_buf_size,
+-				 PCI_DMA_FROMDEVICE);
++				 DMA_FROM_DEVICE);
+ 
+ 		bad_mic = false;
+ 		ctrl = le32_to_cpu(prx_ring_done->ctrl);
+--- a/hif/pcie/8964/tx_ndp.c
++++ b/hif/pcie/8964/tx_ndp.c
+@@ -132,10 +132,10 @@ static void pcie_tx_ring_cleanup_ndp(str
+ 	for (i = 0; i < MAX_TX_RING_SEND_SIZE; i++) {
+ 		tx_skb = desc->tx_vbuflist[i];
+ 		if (tx_skb) {
+-			pci_unmap_single(pcie_priv->pdev,
++			dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 					 desc->pphys_tx_buflist[i],
+ 					 tx_skb->len,
+-					 PCI_DMA_TODEVICE);
++					 DMA_TO_DEVICE);
+ 			dev_kfree_skb_any(tx_skb);
+ 			desc->pphys_tx_buflist[i] = 0;
+ 			desc->tx_vbuflist[i] = NULL;
+@@ -267,9 +267,9 @@ static inline int pcie_tx_skb_ndp(struct
+ 			(TXRING_CTRL_TAG_MGMT << TXRING_CTRL_TAG_SHIFT));
+ 	}
+ 
+-	dma = pci_map_single(pcie_priv->pdev, tx_skb->data,
+-			     tx_skb->len, PCI_DMA_TODEVICE);
+-	if (pci_dma_mapping_error(pcie_priv->pdev, dma)) {
++	dma = dma_map_single(&(pcie_priv->pdev)->dev, tx_skb->data,
++			     tx_skb->len, DMA_TO_DEVICE);
++	if (dma_mapping_error(&(pcie_priv->pdev)->dev, dma)) {
+ 		dev_kfree_skb_any(tx_skb);
+ 		wiphy_err(priv->hw->wiphy,
+ 			  "failed to map pci memory!\n");
+@@ -451,10 +451,10 @@ void pcie_tx_done_ndp(struct ieee80211_h
+ 				  "buffer is NULL for tx done ring\n");
+ 			break;
+ 		}
+-		pci_unmap_single(pcie_priv->pdev,
++		dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 				 desc->pphys_tx_buflist[index],
+ 				 skb->len,
+-				 PCI_DMA_TODEVICE);
++				 DMA_TO_DEVICE);
+ 		desc->pphys_tx_buflist[index] = 0;
+ 		desc->tx_vbuflist[index] = NULL;
+ 
+--- a/hif/pcie/8997/rx.c
++++ b/hif/pcie/8997/rx.c
+@@ -107,11 +107,11 @@ static int pcie_rx_ring_init(struct mwl_
+ 			desc->prx_ring[i].rssi = 0x00;
+ 			desc->prx_ring[i].pkt_len =
+ 				cpu_to_le16(SYSADPT_MAX_AGGR_SIZE);
+-			dma = pci_map_single(pcie_priv->pdev,
++			dma = dma_map_single(&(pcie_priv->pdev)->dev,
+ 					     rx_hndl->psk_buff->data,
+ 					     desc->rx_buf_size,
+-					     PCI_DMA_FROMDEVICE);
+-			if (pci_dma_mapping_error(pcie_priv->pdev, dma)) {
++					     DMA_FROM_DEVICE);
++			if (dma_mapping_error(&(pcie_priv->pdev)->dev, dma)) {
+ 				wiphy_err(priv->hw->wiphy,
+ 					  "failed to map pci memory!\n");
+ 				return -ENOMEM;
+@@ -153,11 +153,11 @@ static void pcie_rx_ring_cleanup(struct
+ 			if (!rx_hndl->psk_buff)
+ 				continue;
+ 
+-			pci_unmap_single(pcie_priv->pdev,
++			dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 					 le32_to_cpu
+ 					 (rx_hndl->pdesc->pphys_buff_data),
+ 					 desc->rx_buf_size,
+-					 PCI_DMA_FROMDEVICE);
++					 DMA_FROM_DEVICE);
+ 
+ 			dev_kfree_skb_any(rx_hndl->psk_buff);
+ 
+@@ -332,11 +332,11 @@ static inline int pcie_rx_refill(struct
+ 	rx_hndl->pdesc->rssi = 0x00;
+ 	rx_hndl->pdesc->pkt_len = cpu_to_le16(desc->rx_buf_size);
+ 
+-	dma = pci_map_single(pcie_priv->pdev,
++	dma = dma_map_single(&pcie_priv->pdev->dev,
+ 			     rx_hndl->psk_buff->data,
+ 			     desc->rx_buf_size,
+-			     PCI_DMA_FROMDEVICE);
+-	if (pci_dma_mapping_error(pcie_priv->pdev, dma)) {
++			     DMA_FROM_DEVICE);
++	if (dma_mapping_error(&(pcie_priv->pdev)->dev, dma)) {
+ 		dev_kfree_skb_any(rx_hndl->psk_buff);
+ 		wiphy_err(priv->hw->wiphy,
+ 			  "failed to map pci memory!\n");
+@@ -410,10 +410,10 @@ void pcie_8997_rx_recv(unsigned long dat
+ 		prx_skb = curr_hndl->psk_buff;
+ 		if (!prx_skb)
+ 			goto out;
+-		pci_unmap_single(pcie_priv->pdev,
++		dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 				 le32_to_cpu(curr_hndl->pdesc->pphys_buff_data),
+ 				 desc->rx_buf_size,
+-				 PCI_DMA_FROMDEVICE);
++				 DMA_FROM_DEVICE);
+ 		pkt_len = le16_to_cpu(curr_hndl->pdesc->pkt_len);
+ 
+ 		if (skb_tailroom(prx_skb) < pkt_len) {
+--- a/hif/pcie/8997/tx.c
++++ b/hif/pcie/8997/tx.c
+@@ -139,10 +139,10 @@ static void pcie_txbd_ring_delete(struct
+ 			skb = pcie_priv->tx_buf_list[num];
+ 			tx_desc = (struct pcie_tx_desc *)skb->data;
+ 
+-			pci_unmap_single(pcie_priv->pdev,
++			dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 					 le32_to_cpu(tx_desc->pkt_ptr),
+ 					 skb->len,
+-					 PCI_DMA_TODEVICE);
++					 DMA_TO_DEVICE);
+ 			dev_kfree_skb_any(skb);
+ 		}
+ 		pcie_priv->tx_buf_list[num] = NULL;
+@@ -222,9 +222,9 @@ static inline void pcie_tx_skb(struct mw
+ 	tx_desc->type = tx_ctrl->type;
+ 	tx_desc->xmit_control = tx_ctrl->xmit_control;
+ 	tx_desc->sap_pkt_info = 0;
+-	dma = pci_map_single(pcie_priv->pdev, tx_skb->data,
+-			     tx_skb->len, PCI_DMA_TODEVICE);
+-	if (pci_dma_mapping_error(pcie_priv->pdev, dma)) {
++	dma = dma_map_single(&(pcie_priv->pdev)->dev, tx_skb->data,
++			     tx_skb->len, DMA_TO_DEVICE);
++	if (dma_mapping_error(&(pcie_priv->pdev)->dev, dma)) {
+ 		dev_kfree_skb_any(tx_skb);
+ 		wiphy_err(priv->hw->wiphy,
+ 			  "failed to map pci memory!\n");
+@@ -401,10 +401,10 @@ static void pcie_pfu_tx_done(struct mwl_
+ 			pfu_dma = (struct pcie_pfu_dma_data *)done_skb->data;
+ 			tx_desc = &pfu_dma->tx_desc;
+ 			dma_data = &pfu_dma->dma_data;
+-			pci_unmap_single(pcie_priv->pdev,
++			dma_unmap_single(&(pcie_priv->pdev)->dev,
+ 					 le32_to_cpu(data_buf->paddr),
+ 					 le16_to_cpu(data_buf->len),
+-					 PCI_DMA_TODEVICE);
++					 DMA_TO_DEVICE);
+ 			tx_desc->pkt_ptr = 0;
+ 			tx_desc->pkt_len = 0;
+ 			tx_desc->status = cpu_to_le32(EAGLE_TXD_STATUS_IDLE);
+@@ -875,4 +875,4 @@ void pcie_8997_tx_del_sta_amsdu_pkts(str
+ 		}
+ 	}
+ 	spin_unlock_bh(&sta_info->amsdu_lock);
+-}
+\ No newline at end of file
++}

package/libs/libnl/Makefile

@@ -55,10 +55,16 @@ $(call Package/libnl/default)
   DEPENDS:=+libnl-route
 endef
 
+define Package/libnl-cli
+$(call Package/libnl/default)
+  TITLE:=CLI Netlink Library
+  DEPENDS:=+libnl-genl +libnl-nf
+endef
+
 define Package/libnl
 $(call Package/libnl/default)
   TITLE:=Full Netlink Library
-  DEPENDS:=+libnl-genl +libnl-route +libnl-nf
+  DEPENDS:=+libnl-genl +libnl-route +libnl-nf +libnl-cli
 endef
 
 define Package/libnl-core/description
@@ -77,6 +83,10 @@ define Package/libnl-nf/description
  Netfilter Netlink Library Functions
 endef
 
+define Package/libnl-cli/description
+ CLI Netlink Library Functions
+endef
+
 define Package/libnl/description
  Socket handling, connection management, sending and receiving of data,
  message construction and parsing, object caching system, etc.
@@ -98,6 +108,7 @@ define Build/InstallDev
 	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libnl-genl-3.so $(1)/usr/lib/libnl-genl.so
 	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libnl-nf-3.so $(1)/usr/lib/libnl-nf.so
 	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libnl-route-3.so $(1)/usr/lib/libnl-route.so
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libnl-cli-3.so $(1)/usr/lib/libnl-cli.so
 endef
 
 define Package/libnl-core/install
@@ -120,6 +131,11 @@ define Package/libnl-nf/install
 	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libnl-nf-3.so.* $(1)/usr/lib/
 endef
 
+define Package/libnl-cli/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libnl-cli-3.so.* $(1)/usr/lib/
+endef
+
 define Package/libnl/install
 	:
 endef
@@ -128,4 +144,5 @@ $(eval $(call BuildPackage,libnl-core))
 $(eval $(call BuildPackage,libnl-genl))
 $(eval $(call BuildPackage,libnl-route))
 $(eval $(call BuildPackage,libnl-nf))
+$(eval $(call BuildPackage,libnl-cli))
 $(eval $(call BuildPackage,libnl))

package/libs/libselinux/Makefile

@@ -18,6 +18,8 @@ PKG_LICENSE_FILES:=LICENSE
 PKG_MAINTAINER:=Thomas Petazzoni <thomas.petazzoni@bootlin.com>
 PKG_CPE_ID:=cpe:/a:selinuxproject:libselinux
 
+PKG_BUILD_FLAGS:=no-lto
+
 HOST_BUILD_DEPENDS:=libsepol/host musl-fts/host pcre2/host
 
 include $(INCLUDE_DIR)/package.mk

package/libs/libsepol/Makefile

@@ -16,6 +16,8 @@ PKG_HASH:=78fdaf69924db780bac78546e43d9c44074bad798c2c415d0b9bb96d065ee8a2
 PKG_MAINTAINER:=Thomas Petazzoni <thomas.petazzoni@bootlin.com>
 PKG_CPE_ID:=cpe:/a:selinuxproject:libsepol
 
+PKG_BUILD_FLAGS:=no-lto
+
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/host-build.mk
 

package/libs/mbedtls/Config.in

@@ -104,7 +104,7 @@ config MBEDTLS_ECP_DP_SECP384R1_ENABLED
 
 config MBEDTLS_ECP_DP_SECP521R1_ENABLED
 	bool "MBEDTLS_ECP_DP_SECP521R1_ENABLED"
-	default n
+	default y
 
 config MBEDTLS_ECP_DP_SECP192K1_ENABLED
 	bool "MBEDTLS_ECP_DP_SECP192K1_ENABLED"

package/libs/mbedtls/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=mbedtls
-PKG_VERSION:=2.28.4
-PKG_RELEASE:=1
+PKG_VERSION:=2.28.7
+PKG_RELEASE:=2
 PKG_BUILD_FLAGS:=no-mips16 gc-sections no-lto
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://codeload.github.com/ARMmbed/mbedtls/tar.gz/v$(PKG_VERSION)?
-PKG_HASH:=578c4dcd15bbff3f5cd56aa07cd4f850fc733634e3d5947be4f7157d5bfd81ac
+PKG_HASH:=1df6073f0cf6a4e1953890bf5e0de2a8c7e6be50d6d6c69fa9fefcb1d14e981a
 
 PKG_LICENSE:=GPL-2.0-or-later
 PKG_LICENSE_FILES:=gpl-2.0.txt

package/libs/mbedtls/patches/100-x509-crt-verify-SAN-iPAddress.patch

@@ -33,7 +33,7 @@ Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
  #include <windows.h>
  #else
  #include <time.h>
-@@ -3001,6 +3005,61 @@ find_parent:
+@@ -3002,6 +3006,61 @@ find_parent:
      }
  }
  
@@ -95,7 +95,7 @@ Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
  /*
   * Check for CN match
   */
-@@ -3021,24 +3080,51 @@ static int x509_crt_check_cn(const mbedt
+@@ -3022,24 +3081,51 @@ static int x509_crt_check_cn(const mbedt
      return -1;
  }
  
@@ -158,7 +158,7 @@ Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
  }
  
  /*
-@@ -3049,31 +3135,23 @@ static void x509_crt_verify_name(const m
+@@ -3050,31 +3136,23 @@ static void x509_crt_verify_name(const m
                                   uint32_t *flags)
  {
      const mbedtls_x509_name *name;

package/libs/openssl/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=openssl
-PKG_VERSION:=3.0.11
+PKG_VERSION:=3.0.13
 PKG_RELEASE:=1
 PKG_BUILD_FLAGS:=no-mips16 gc-sections no-lto
 
@@ -24,7 +24,7 @@ PKG_SOURCE_URL:= \
 	ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/ \
 	ftp://ftp.pca.dfn.de/pub/tools/net/openssl/source/old/$(PKG_BASE)/
 
-PKG_HASH:=b3425d3bb4a2218d0697eb41f7fc0cdede016ed19ca49d168b78e8d947887f55
+PKG_HASH:=88525753f79d3bec27d2fa7c66aa0b92b3aa9498dafd93d7cfa4b3780cdae313
 
 PKG_LICENSE:=Apache-2.0
 PKG_LICENSE_FILES:=LICENSE

package/libs/openssl/patches/100-Configure-afalg-support.patch

@@ -10,7 +10,7 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
 
 --- a/Configure
 +++ b/Configure
-@@ -1674,7 +1674,9 @@ $config{CFLAGS} = [ map { $_ eq '--ossl-
+@@ -1677,7 +1677,9 @@ $config{CFLAGS} = [ map { $_ eq '--ossl-
  
  unless ($disabled{afalgeng}) {
      $config{afalgeng}="";

package/libs/openssl/patches/120-strip-cflags-from-binary.patch

@@ -10,7 +10,7 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
 
 --- a/crypto/build.info
 +++ b/crypto/build.info
-@@ -111,7 +111,7 @@ DEFINE[../libcrypto]=$UPLINKDEF
+@@ -109,7 +109,7 @@ DEFINE[../libcrypto]=$UPLINKDEF
  
  DEPEND[info.o]=buildinf.h
  DEPEND[cversion.o]=buildinf.h

package/libs/openssl/patches/140-allow-prefer-chacha20.patch

@@ -16,7 +16,7 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
 
 --- a/ssl/ssl_ciph.c
 +++ b/ssl/ssl_ciph.c
-@@ -1505,11 +1505,29 @@ STACK_OF(SSL_CIPHER) *ssl_create_cipher_
+@@ -1506,11 +1506,29 @@ STACK_OF(SSL_CIPHER) *ssl_create_cipher_
      ssl_cipher_apply_rule(0, SSL_kECDHE, 0, 0, 0, 0, 0, CIPHER_DEL, -1, &head,
                            &tail);
  
@@ -46,7 +46,7 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
  
      /*
       * ...and generally, our preferred cipher is AES.
-@@ -1564,7 +1582,7 @@ STACK_OF(SSL_CIPHER) *ssl_create_cipher_
+@@ -1565,7 +1583,7 @@ STACK_OF(SSL_CIPHER) *ssl_create_cipher_
       * Within each group, ciphers remain sorted by strength and previous
       * preference, i.e.,
       * 1) ECDHE > DHE
@@ -55,7 +55,7 @@ Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
       * 3) AES > rest
       * 4) TLS 1.2 > legacy
       *
-@@ -2235,7 +2253,13 @@ const char *OSSL_default_cipher_list(voi
+@@ -2236,7 +2254,13 @@ const char *OSSL_default_cipher_list(voi
   */
  const char *OSSL_default_ciphersuites(void)
  {

package/libs/wolfssl/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wolfssl
-PKG_VERSION:=5.6.3-stable
+PKG_VERSION:=5.6.4-stable
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=https://github.com/wolfSSL/wolfssl/archive/v$(PKG_VERSION)
-PKG_HASH:=2e74a397fa797c2902d7467d500de904907666afb4ff80f6464f6efd5afb114a
+PKG_HASH:=031691906794ff45e1e792561cf31759f5d29ac74936bc8dffb8b14f16d820b4
 
 PKG_FIXUP:=libtool libtool-abiver
 PKG_INSTALL:=1

package/libs/wolfssl/patches/001-fix-detection-of-cut-tool-in-configure.ac.patch

@@ -1,25 +0,0 @@
-From 41d248461bd9ad44193a4806ecb5361513e8944e Mon Sep 17 00:00:00 2001
-From: jordan <jordan@wolfssl.com>
-Date: Tue, 27 Jun 2023 13:18:25 -0500
-Subject: [PATCH] fix detection of cut tool in configure.ac
-
----
- configure.ac | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/configure.ac
-+++ b/configure.ac
-@@ -8723,10 +8723,11 @@ echo "extern \"C\" {" >> $OPTION_FILE
- echo "#endif" >> $OPTION_FILE
- echo "" >> $OPTION_FILE
- 
--# check for supported command to trim option with
-+# Check for supported command to trim option with.
-+# note: cut requires an argument to exit with success.
- if colrm >/dev/null 2>&1 </dev/null; then
-     TRIM="colrm 3"
--elif cut >/dev/null 2>&1 </dev/null; then
-+elif cut --version >/dev/null 2>&1 </dev/null; then
-     TRIM="cut -c1-2"
- else
-     AC_MSG_ERROR([Could not find colrm or cut to make options file])

package/network/config/firewall4/Makefile

@@ -9,9 +9,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/firewall4.git
-PKG_SOURCE_DATE:=2023-03-23
-PKG_SOURCE_VERSION:=04a06bd70b9808b14444cae81a2faba4708ee231
-PKG_MIRROR_HASH:=37c34facb733c50d0fdbfa238765a23e667e4daaae9728aaccbaba87a2a07bb9
+PKG_SOURCE_DATE:=2023-09-01
+PKG_SOURCE_VERSION:=598d9fbb5179667aa0c525040eaa41bc7f2dc015
+PKG_MIRROR_HASH:=038b5b5611425e3c0fcc3ef4a0aea37296733300766d787909a689d16d4f39b4
 PKG_MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
 PKG_LICENSE:=ISC
 

package/network/config/netifd/Makefile

@@ -5,9 +5,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/netifd.git
-PKG_SOURCE_DATE:=2023-09-19
-PKG_SOURCE_VERSION:=7a58b995fdbecd9beed57e4d66d42cb3cf66aee2
-PKG_MIRROR_HASH:=a460a3b912047f8802eb24bb737084a08dad65b2dd520e5f5e7459379d1fcf8c
+PKG_SOURCE_DATE:=2024-01-04
+PKG_SOURCE_VERSION:=c18cc79d50002ab8529c21184aceb016c61ac61c
+PKG_MIRROR_HASH:=0a1080ade51dc4a55249c8899d4d384f665e0d21075adab24ea23a2808165e05
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 
 PKG_LICENSE:=GPL-2.0

package/network/services/dnsmasq/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dnsmasq
-PKG_UPSTREAM_VERSION:=2.89
+PKG_UPSTREAM_VERSION:=2.90
 PKG_VERSION:=$(subst test,~~test,$(subst rc,~rc,$(PKG_UPSTREAM_VERSION)))
-PKG_RELEASE:=4
+PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_UPSTREAM_VERSION).tar.xz
 PKG_SOURCE_URL:=https://thekelleys.org.uk/dnsmasq/
-PKG_HASH:=02bd230346cf0b9d5909f5e151df168b2707103785eb616b56685855adebb609
+PKG_HASH:=8e50309bd837bfec9649a812e066c09b6988b73d749b7d293c06c57d46a109e4
 
 PKG_LICENSE:=GPL-2.0
 PKG_LICENSE_FILES:=COPYING

package/network/services/dnsmasq/patches/0001-Fix-spurious-resource-limit-exceeded-messages.patch

@@ -0,0 +1,43 @@
+From 1ed783b8d7343c42910a61f12a8fc6237eb80417 Mon Sep 17 00:00:00 2001
+From: Simon Kelley <simon@thekelleys.org.uk>
+Date: Mon, 19 Feb 2024 12:22:43 +0000
+Subject: Fix spurious "resource limit exceeded" messages.
+
+Replies from upstream with a REFUSED rcode can result in
+log messages stating that a resource limit has been exceeded,
+which is not the case.
+
+Thanks to Dominik Derigs and the Pi-hole project for
+spotting this.
+---
+ CHANGELOG     | 5 +++++
+ src/forward.c | 6 +++---
+ 2 files changed, 8 insertions(+), 3 deletions(-)
+
+--- a/CHANGELOG
++++ b/CHANGELOG
+@@ -1,3 +1,8 @@
++version 2.91
++	Fix spurious "resource limit exceeded messages". Thanks to 
++	Dominik Derigs for the bug report.
++	
++
+ version 2.90
+ 	Fix reversion in --rev-server introduced in 2.88 which
+ 	caused breakage if the prefix length is not exactly divisible
+--- a/src/forward.c
++++ b/src/forward.c
+@@ -937,10 +937,10 @@ static void dnssec_validate(struct frec
+ 	status = dnssec_validate_reply(now, header, plen, daemon->namebuff, daemon->keyname, &forward->class, 
+ 				       !option_bool(OPT_DNSSEC_IGN_NS) && (forward->sentto->flags & SERV_DO_DNSSEC),
+ 				       NULL, NULL, NULL, &orig->validate_counter);
+-    }
+ 
+-  if (STAT_ISEQUAL(status, STAT_ABANDONED))
+-    log_resource = 1;
++      if (STAT_ISEQUAL(status, STAT_ABANDONED))
++	log_resource = 1;
++    }
+   
+   /* Can't validate, as we're missing key data. Put this
+      answer aside, whilst we get that. */     

package/network/services/dnsmasq/patches/0002-PATCH-Fix-error-introduced-in-51471cafa5a4fa44d6fe49.patch

@@ -0,0 +1,31 @@
+From ccff85ad72d2f858d9743d40525128e4f62d41a8 Mon Sep 17 00:00:00 2001
+From: renmingshuai <renmingshuai@huawei.com>
+Date: Wed, 21 Feb 2024 00:24:25 +0000
+Subject: [PATCH] Fix error introduced in
+ 51471cafa5a4fa44d6fe490885d9910bd72a5907
+
+Signed-off-by: renmingshuai <renmingshuai@huawei.com>
+---
+ src/dnssec.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/src/dnssec.c
++++ b/src/dnssec.c
+@@ -1547,7 +1547,7 @@ static int prove_non_existence_nsec3(str
+       nsecs[i] = NULL; /* Speculative, will be restored if OK. */
+       
+       if (!(p = skip_name(nsec3p, header, plen, 15)))
+-	return 0; /* bad packet */
++	return DNSSEC_FAIL_BADPACKET; /* bad packet */
+       
+       p += 10; /* type, class, TTL, rdlen */
+       
+@@ -1640,7 +1640,7 @@ static int prove_non_existence_nsec3(str
+   if (!wildname)
+     {
+       if (!(wildcard = strchr(next_closest, '.')) || wildcard == next_closest)
+-	return 0;
++	return DNSSEC_FAIL_NONSEC;
+       
+       wildcard--;
+       *wildcard = '*';

package/network/services/dnsmasq/patches/100-remove-old-runtime-kernel-support.patch

@@ -13,7 +13,7 @@ Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
 
 --- a/src/dnsmasq.c
 +++ b/src/dnsmasq.c
-@@ -103,10 +103,6 @@ int main (int argc, char **argv)
+@@ -105,10 +105,6 @@ int main (int argc, char **argv)
    
    read_opts(argc, argv, compile_opts);
   
@@ -26,7 +26,7 @@ Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
  
 --- a/src/dnsmasq.h
 +++ b/src/dnsmasq.h
-@@ -1248,7 +1248,7 @@ extern struct daemon {
+@@ -1277,7 +1277,7 @@ extern struct daemon {
    int inotifyfd;
  #endif
  #if defined(HAVE_LINUX_NETWORK)
@@ -35,7 +35,7 @@ Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
  #elif defined(HAVE_BSD_NETWORK)
    int dhcp_raw_fd, dhcp_icmp_fd, routefd;
  #endif
-@@ -1453,9 +1453,6 @@ int read_write(int fd, unsigned char *pa
+@@ -1491,9 +1491,6 @@ int read_write(int fd, unsigned char *pa
  void close_fds(long max_fd, int spare1, int spare2, int spare3);
  int wildcard_match(const char* wildcard, const char* match);
  int wildcard_matchn(const char* wildcard, const char* match, int num);
@@ -140,7 +140,7 @@ Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
       my_syslog(LOG_ERR, _("failed to update ipset %s: %s"), setname, strerror(errno));
 --- a/src/util.c
 +++ b/src/util.c
-@@ -855,22 +855,3 @@ int wildcard_matchn(const char* wildcard
+@@ -866,22 +866,3 @@ int wildcard_matchn(const char* wildcard
  
    return (!num) || (*wildcard == *match);
  }