ImmortalWrt v24.10.0: adjust config defaults

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

config/Config-build.in

@@ -423,11 +423,11 @@ menu "Global build settings"
 
 	endchoice
 
-	config SECCOMP
+	config USE_SECCOMP
 		bool "Enable SECCOMP"
 		select KERNEL_SECCOMP
 		select PACKAGE_procd-seccomp
-		depends on (aarch64 || arm || armeb || mips || mipsel || mips64 || mips64el || i386 || powerpc || x86_64)
+		depends on (aarch64 || arm || armeb || mips || mipsel || mips64 || mips64el || i386 || loongarch64 || powerpc || x86_64)
 		depends on !TARGET_uml
 		default y
 		help

config/Config-kernel.in

@@ -1257,6 +1257,13 @@ config KERNEL_MPTCP_IPV6
 	default KERNEL_MPTCP
 endif
 
+config KERNEL_NF_CONNTRACK_TIMEOUT
+	bool "Per-connection connection tracking timeout"
+	default y if !SMALL_FLASH
+	help
+	   Select this option to enable support for per-connection conntrack timeouts.
+	   Increases the (uncompressed) size of nf_conntrack.ko by ~8kB.
+
 #
 # NFS related symbols
 #

feeds.conf.default

@@ -1,4 +1,4 @@
-src-git packages https://github.com/immortalwrt/packages.git^4e64a5891e40dab3a2ec2949cc6c4eb111905d86
-src-git luci https://github.com/immortalwrt/luci.git^314b140efc5d6e9eec69155330d84962887e464d
-src-git routing https://github.com/openwrt/routing.git^84d97e684bcb6a63dbfdfbfd9ec7407192861239
+src-git packages https://github.com/immortalwrt/packages.git^4d9500cb61a224d88c71cf795af2e367235b3ac0
+src-git luci https://github.com/immortalwrt/luci.git^c60cfb5754a72d1ec93041fb8ef69c05695b51f5
+src-git routing https://github.com/openwrt/routing.git^e87b55c6a642947ad7e24cd5054a637df63d5dbe
 src-git telephony https://github.com/openwrt/telephony.git^fd605af7143165a2490681ec1752f259873b9147

include/default-packages.mk

@@ -0,0 +1,5 @@
+ifneq ($(CONFIG_USE_APK),)
+  DEFAULT_PACKAGES += apk-openssl
+else
+  DEFAULT_PACKAGES += opkg
+endif

include/kernel-6.6

@@ -1,2 +1,2 @@
-LINUX_VERSION-6.6 = .66
-LINUX_KERNEL_HASH-6.6.66 = 9d757937c4661c2f512c62641b74ef74eff9bb13dc5dbcbaaa108c21152f1e52
+LINUX_VERSION-6.6 = .73
+LINUX_KERNEL_HASH-6.6.73 = d2028db190c201650898be8db1c705e9fe73ab44fc04290b4f7af63514122490

include/kernel-defaults.mk

@@ -175,7 +175,6 @@ define Kernel/PrepareConfigPerRootfs
 		[ ! -d "$(1)" ] || rm -rf $(1); \
 		mkdir $(1) && $(CP) -T $(LINUX_DIR) $(1); \
 		touch $(1)/.config; \
-		rm -rf $(1)/usr/initramfs_data.cpio*; \
 	}
 endef
 
@@ -190,6 +189,7 @@ define Kernel/CompileImage/Initramfs
 		$(call Kernel/Configure/Initramfs,$(if $(1),$(1),$(TARGET_DIR)),$(LINUX_DIR)$(2)); \
 		$(CP) $(GENERIC_PLATFORM_DIR)/other-files/init $(if $(1),$(1),$(TARGET_DIR))/init; \
 		$(if $(SOURCE_DATE_EPOCH),touch -hcd "@$(SOURCE_DATE_EPOCH)" $(if $(1),$(1),$(TARGET_DIR)) $(if $(1),$(1),$(TARGET_DIR))/init;) \
+		rm -rf $(LINUX_DIR)$(2)/usr/initramfs_data.cpio*; \
 		$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE), \
 			$(call locked,{ \
 				$(if $(call qstrip,$(CONFIG_EXTERNAL_CPIO)), \

include/target.mk

@@ -103,45 +103,9 @@ else
   endif
 endif
 
-ifneq ($(DUMP),)
-  # Parse generic config that might be set before a .config is generated to modify the
-  # default package configuration
-  # Keep DYNAMIC_DEF_PKG_CONF in sync with toplevel.mk to reflect the same configs
-  DYNAMIC_DEF_PKG_CONF := CONFIG_USE_APK CONFIG_SELINUX CONFIG_SMALL_FLASH CONFIG_SECCOMP
-  $(foreach config, $(DYNAMIC_DEF_PKG_CONF), \
-    $(eval $(config) := $(shell grep "$(config)=y" $(TOPDIR)/.config 2>/dev/null)) \
-  )
-  # The config options that are enabled by default and where other default
-  # packages depends on needs to be set if they are missing in the .config.
-  ifeq ($(shell grep "CONFIG_SECCOMP" $(TOPDIR)/.config 2>/dev/null),)
-    ifeq ($(filter $(BOARD), uml),)
-    ifneq ($(filter $(ARCH), aarch64 arm armeb mips mipsel mips64 mips64el i386 powerpc x86_64),)
-      CONFIG_SECCOMP := y
-    endif
-    endif
-  endif
-endif
-
-ifneq ($(CONFIG_USE_APK),)
-DEFAULT_PACKAGES+=apk-openssl
-else
-DEFAULT_PACKAGES+=opkg
-endif
-
-ifneq ($(CONFIG_SELINUX),)
-DEFAULT_PACKAGES+=busybox-selinux procd-selinux
-else
-DEFAULT_PACKAGES+=busybox procd
-endif
-
 # include ujail on systems with enough storage
-ifeq ($(CONFIG_SMALL_FLASH),)
-DEFAULT_PACKAGES+=procd-ujail
-endif
-
-# include seccomp ld-preload hooks if kernel supports it
-ifneq ($(CONFIG_SECCOMP),)
-DEFAULT_PACKAGES+=procd-seccomp
+ifeq ($(filter small_flash,$(FEATURES)),)
+  DEFAULT_PACKAGES+=procd-ujail
 endif
 
 # Add device specific packages (here below to allow device type set from subtarget)

include/toplevel.mk

@@ -75,22 +75,7 @@ endif
 
 _ignore = $(foreach p,$(IGNORE_PACKAGES),--ignore $(p))
 
-# Config that will invalidate the .targetinfo as they will affect
-# DEFAULT_PACKAGES.
-# Keep DYNAMIC_DEF_PKG_CONF in sync with target.mk to reflect the same configs
-DYNAMIC_DEF_PKG_CONF := CONFIG_USE_APK CONFIG_SELINUX CONFIG_SMALL_FLASH CONFIG_SECCOMP
-check-dynamic-def-pkg: FORCE
-	@+DEF_PKG_CONFS=""; \
-	if [ -f $(TOPDIR)/.config ]; then \
-		for config in $(DYNAMIC_DEF_PKG_CONF); do \
-			DEF_PKG_CONFS="$$DEF_PKG_CONFS "$$(grep "$$config"=y $(TOPDIR)/.config); \
-		done; \
-	fi; \
-	[ ! -f tmp/.packagedynamicdefault ] || OLD_DEF_PKG_CONFS=$$(cat tmp/.packagedynamicdefault); \
-	[ "$$DEF_PKG_CONFS" = "$$OLD_DEF_PKG_CONFS" ] || rm -rf tmp/info/.targetinfo*; \
-	mkdir -p tmp && echo "$$DEF_PKG_CONFS" > tmp/.packagedynamicdefault;
-
-prepare-tmpinfo: check-dynamic-def-pkg FORCE
+prepare-tmpinfo: FORCE
 	@+$(MAKE) -r -s $(STAGING_DIR_HOST)/.prereq-build $(PREP_MK)
 	mkdir -p tmp/info feeds
 	[ -e $(TOPDIR)/feeds/base ] || ln -sf $(TOPDIR)/package $(TOPDIR)/feeds/base

include/trusted-firmware-a.mk

@@ -3,7 +3,7 @@ PKG_CPE_ID ?= cpe:/a:arm:trusted_firmware-a
 
 ifndef PKG_SOURCE_PROTO
 PKG_SOURCE = trusted-firmware-a-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/snapshot
+PKG_SOURCE_URL:=https://codeload.github.com/TrustedFirmware-A/trusted-firmware-a/tar.gz/v$(PKG_VERSION)?
 endif
 
 PKG_BUILD_DIR = $(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),24.10.0-rc2)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),24.10.0)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
-VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r32566-56e91d0bbea5)
+VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),r32824-6a73dae98c9c)
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.immortalwrt.org/releases/24.10.0-rc2)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.immortalwrt.org/releases/24.10.0)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),ImmortalWrt)

package/base-files/Makefile

@@ -39,7 +39,11 @@ endif
 define Package/base-files
   SECTION:=base
   CATEGORY:=Base system
-  DEPENDS:=+netifd +libc +jsonfilter +SIGNED_PACKAGES:usign +SIGNED_PACKAGES:openwrt-keyring +NAND_SUPPORT:ubi-utils +fstools +fwtool
+  DEPENDS:= \
+	+netifd +libc +jsonfilter +SIGNED_PACKAGES:usign +SIGNED_PACKAGES:openwrt-keyring \
+	+NAND_SUPPORT:ubi-utils +fstools +fwtool \
+	+SELINUX:procd-selinux +!SELINUX:procd +USE_SECCOMP:procd-seccomp \
+	+SELINUX:busybox-selinux +!SELINUX:busybox
   TITLE:=Base filesystem for OpenWrt
   URL:=http://openwrt.org/
   VERSION:=$(PKG_RELEASE)~$(lastword $(subst -, ,$(REVISION)))

package/base-files/files/lib/functions/system.sh

@@ -66,7 +66,7 @@ get_mac_ascii() {
 	local key="$2"
 	local mac_dirty
 
-	mac_dirty=$(strings "$part" | sed -n 's/^'"$key"'=//p')
+	mac_dirty=$(strings "$part" | tr -d ' \t' | sed -n 's/^'"$key"'=//p' | head -n 1)
 
 	# "canonicalize" mac
 	[ -n "$mac_dirty" ] && macaddr_canonicalize "$mac_dirty"

package/base-files/image-config.in

@@ -190,7 +190,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.immortalwrt.org/releases/24.10.0-rc2"
+		default "https://downloads.immortalwrt.org/releases/24.10.0"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/arm-trusted-firmware-mediatek/Makefile

@@ -35,6 +35,8 @@ define Trusted-Firmware-A/Default
   DRAM_USE_COMB:=
   RAM_BOOT_UART_DL:=
   USE_UBI:=
+  FIP_OFFSET:=
+  FIP_SIZE:=
 endef
 
 define Trusted-Firmware-A/mt7622-nor-1ddr
@@ -221,6 +223,16 @@ define Trusted-Firmware-A/mt7981-spim-nand-ddr3
   DDR_TYPE:=ddr3
 endef
 
+define Trusted-Firmware-A/mt7981-cudy-tr3000-v1
+  NAME:=Cudy TR3000 v1 (SPI-NAND via SPIM, DDR3)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+  FIP_OFFSET:=0x3c0000
+  FIP_SIZE:=0x200000
+endef
+
 define Trusted-Firmware-A/mt7986-ram-ddr4
   NAME:=MediaTek MT7986 (RAM, DDR4)
   BOOT_DEVICE:=ram
@@ -534,6 +546,7 @@ TFA_TARGETS:= \
 	mt7981-ram-ddr4 \
 	mt7981-emmc-ddr4 \
 	mt7981-spim-nand-ddr4 \
+	mt7981-cudy-tr3000-v1 \
 	mt7986-ram-ddr3 \
 	mt7986-emmc-ddr3 \
 	mt7986-nor-ddr3 \
@@ -581,6 +594,8 @@ TFA_MAKE_FLAGS += \
 	$(if $(USE_UBI),UBI=1 $(if $(findstring mt7622,$(PLAT)),OVERRIDE_UBI_START_ADDR=0x80000)) \
 	$(if $(USE_UBI),UBI=1 $(if $(findstring mt7981,$(PLAT)),OVERRIDE_UBI_START_ADDR=0x100000)) \
 	$(if $(USE_UBI),UBI=1 $(if $(findstring mt7986,$(PLAT)),OVERRIDE_UBI_START_ADDR=0x200000)) \
+	$(if $(FIP_OFFSET),OVERRIDE_FIP_BASE=$(FIP_OFFSET)) \
+	$(if $(FIP_SIZE),OVERRIDE_FIP_SIZE=$(FIP_SIZE)) \
 	$(if $(RAM_BOOT_UART_DL),bl2,all)
 
 define Package/trusted-firmware-a-ram/install

package/boot/uboot-d1/Makefile

@@ -30,7 +30,7 @@ define U-Boot/dongshan_nezha_stu
   OPENSBI:=generic
   DEPENDS:=+opensbi_generic
   UBOOT_DTS:=sun20i-d1-dongshan-nezha-stu.dtb
-  BUILD_DEVICES:=dongshan_nezha_stu
+  BUILD_DEVICES:=100ask_dongshan-nezha-stu
 endef
 
 define U-Boot/lichee_rv_dock
@@ -38,7 +38,7 @@ define U-Boot/lichee_rv_dock
   OPENSBI:=generic
   DEPENDS:=+opensbi_generic
   UBOOT_DTS:=sun20i-d1-lichee-rv-dock.dtb
-  BUILD_DEVICES:=lichee_rv_dock
+  BUILD_DEVICES:=sipeed_lichee-rv-dock
 endef
 
 define U-Boot/mangopi_mq_pro
@@ -46,7 +46,7 @@ define U-Boot/mangopi_mq_pro
   OPENSBI:=generic
   DEPENDS:=+opensbi_generic
   UBOOT_DTS:=sun20i-d1-mangopi-mq-pro.dtb
-  BUILD_DEVICES:=mangopi_mq_pro
+  BUILD_DEVICES:=widora_mangopi-mq-pro
 endef
 
 define U-Boot/nezha
@@ -54,7 +54,7 @@ define U-Boot/nezha
   OPENSBI:=generic
   DEPENDS:=+opensbi_generic
   UBOOT_DTS:=sun20i-d1-nezha.dtb
-  BUILD_DEVICES:=nezha
+  BUILD_DEVICES:=allwinner_d1-nezha
 endef
 
 UBOOT_TARGETS := \
@@ -74,7 +74,7 @@ endef
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(DTS_DIR)/$(UBOOT_DTS) $(STAGING_DIR_IMAGE)/$(UBOOT_DTS)
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(UBOOT_IMAGE)
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(BUILD_DEVICES)-$(UBOOT_IMAGE)
 	mkimage -C none -A riscv -T script -d uEnv-$(UENV).txt \
 		$(STAGING_DIR_IMAGE)/$(BUILD_DEVICES)-boot.scr
 endef

package/boot/uboot-envtools/files/ath79

@@ -28,6 +28,7 @@ asus,rt-ac59u-v2|\
 asus,zenwifi-cd6n|\
 asus,zenwifi-cd6r|\
 buffalo,bhr-4grv2|\
+buffalo,wzr-450hp2|\
 devolo,magic-2-wifi|\
 engenius,eap300-v2|\
 engenius,eap350-v1|\

package/boot/uboot-envtools/files/mediatek_filogic

@@ -36,6 +36,7 @@ case "$board" in
 abt,asr3000|\
 cetron,ct3003-ubootmod|\
 cmcc,a10|\
+cudy,tr3000-v1-ubootmod|\
 h3c,magic-nx30-pro|\
 imou,lc-hx3001|\
 jcg,q30-pro|\
@@ -61,7 +62,8 @@ acer,vero-w6m|\
 glinet,gl-mt2500|\
 glinet,gl-mt6000|\
 glinet,gl-x3000|\
-glinet,gl-xe3000)
+glinet,gl-xe3000|\
+huasifei,wh3000-emmc)
 	local envdev=$(find_mmc_part "u-boot-env")
 	ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
 	;;
@@ -93,6 +95,7 @@ konka,komi-a31)
 cetron,ct3003|\
 edgecore,eap111|\
 h3c,magic-nx30-pro-nmbm|\
+livinet,zr-3020|\
 netgear,wax220|\
 zbtlink,zbt-z8102ax|\
 zbtlink,zbt-z8103ax)
@@ -101,7 +104,8 @@ zbtlink,zbt-z8103ax)
 comfast,cf-e393ax)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
 	;;
-dlink,aquila-pro-ai-m30-a1)
+dlink,aquila-pro-ai-m30-a1|\
+dlink,aquila-pro-ai-m60-a1)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
 	;;
 gatonetworks,gdsp)
@@ -110,9 +114,6 @@ gatonetworks,gdsp)
 glinet,gl-mt3000)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
 	;;
-livinet,zr-3020)
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" "1"
-	;;
 mercusys,mr90x-v1|\
 routerich,ax3000|\
 tplink,re6000xd)

package/boot/uboot-mediatek/Makefile

@@ -279,6 +279,17 @@ define U-Boot/mt7981_cmcc_rax3000m-nand
   DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr4
 endef
 
+define U-Boot/mt7981_cudy_tr3000-v1
+  NAME:=Cudy TR3000 v1
+  BUILD_SUBTARGET:=filogic
+  BUILD_DEVICES:=cudy_tr3000-v1-ubootmod
+  UBOOT_CONFIG:=mt7981_cudy_tr3000-v1
+  UBOOT_IMAGE:=u-boot.fip
+  BL2_BOOTDEV:=cudy-tr3000-v1
+  BL2_SOC:=mt7981
+  DEPENDS:=+trusted-firmware-a-mt7981-cudy-tr3000-v1
+endef
+
 define U-Boot/mt7981_glinet_gl-x3000
   NAME:=GL.iNet GL-X3000
   BUILD_SUBTARGET:=filogic
@@ -921,6 +932,7 @@ UBOOT_TARGETS := \
 	mt7981_cmcc_a10 \
 	mt7981_cmcc_rax3000m-emmc \
 	mt7981_cmcc_rax3000m-nand \
+	mt7981_cudy_tr3000-v1 \
 	mt7981_gatonetworks_gdsp \
 	mt7981_glinet_gl-x3000 \
 	mt7981_glinet_gl-xe3000 \

package/boot/uboot-mediatek/patches/445-add-cudy_tr3000-v1.patch

@@ -0,0 +1,330 @@
+--- /dev/null
++++ b/configs/mt7981_cudy_tr3000-v1_defconfig
+@@ -0,0 +1,107 @@
++CONFIG_ARM=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-cudy-tr3000-v1"
++CONFIG_OF_LIBFDT_OVERLAY=y
++CONFIG_TARGET_MT7981=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=40000000
++CONFIG_SYS_LOAD_ADDR=0x46000000
++CONFIG_DEBUG_UART=y
++CONFIG_FIT=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-cudy-tr3000-v1.dtb"
++CONFIG_LOGLEVEL=7
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_LOG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="MT7981> "
++CONFIG_CMD_CPU=y
++CONFIG_CMD_LICENSE=y
++CONFIG_CMD_BOOTMENU=y
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_CMD_STRINGS=y
++CONFIG_CMD_DM=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_GPT=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_PART=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_TFTPSRV=y
++CONFIG_CMD_RARP=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_SNTP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_LINK_LOCAL=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_PSTORE=y
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
++CONFIG_CMD_UUID=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_UBI=y
++CONFIG_CMD_UBI_RENAME=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_OVERWRITE=y
++CONFIG_ENV_IS_IN_UBI=y
++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
++CONFIG_ENV_UBI_PART="ubi"
++CONFIG_ENV_UBI_VOLUME="ubootenv"
++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_DEFAULT_ENV_FILE="cudy_tr3000-v1_env"
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_NETCONSOLE=y
++CONFIG_USE_IPADDR=y
++CONFIG_IPADDR="192.168.1.1"
++CONFIG_USE_SERVERIP=y
++CONFIG_SERVERIP="192.168.1.254"
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_CLK=y
++CONFIG_GPIO_HOG=y
++CONFIG_LED=y
++CONFIG_LED_BLINK=y
++CONFIG_LED_GPIO=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_MTD_SPI_NAND=y
++CONFIG_MTD_UBI_FASTMAP=y
++CONFIG_PHY_FIXED=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7981=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++CONFIG_RAM=y
++CONFIG_DM_SERIAL=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_DM_SPI=y
++CONFIG_MTK_SPIM=y
++CONFIG_ZSTD=y
++CONFIG_HEXDUMP=y
++CONFIG_LMB_MAX_REGIONS=64
+--- /dev/null
++++ b/arch/arm/dts/mt7981-cudy-tr3000-v1.dts
+@@ -0,0 +1,160 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++
++/dts-v1/;
++#include "mt7981.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/linux-event-codes.h>
++
++/ {
++	#address-cells = <1>;
++	#size-cells = <1>;
++	model = "Cudy TR3000 v1";
++	compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
++
++	chosen {
++		stdout-path = &uart0;
++		tick-timer = &timer0;
++	};
++
++	memory@40000000 {
++		device_type = "memory";
++		reg = <0x40000000 0x20000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		button-reset {
++			label = "reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
++		};
++
++		button-mode {
++			label = "mode";
++			linux,code = <EV_SW>;
++			linux,input-type = <BTN_0>;
++			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
++			debounce-interval = <60>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		led_status: led-0 {
++			label = "red:power";
++			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
++			default-state = "on";
++		};
++
++		led-1 {
++			label = "white:status";
++			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
++			default-state = "off";
++		};
++	};
++};
++
++&eth {
++	status = "okay";
++	mediatek,gmac-id = <1>;
++	phy-mode = "gmii";
++	phy-handle = <&phy0>;
++
++	mdio {
++		phy0: ethernet-phy@0 {
++			compatible = "ethernet-phy-id03a2.9461";
++			reg = <0x0>;
++			phy-mode = "gmii";
++		};
++	};
++};
++
++&pinctrl {
++	spi_flash_pins: spi0-pins-func-1 {
++		mux {
++			function = "flash";
++			groups = "spi0", "spi0_wp_hold";
++		};
++
++		conf-pu {
++			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
++		};
++
++		conf-pd {
++			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
++			drive-strength = <MTK_DRIVE_8mA>;
++			bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
++		};
++	};
++};
++
++&spi0 {
++	#address-cells = <1>;
++	#size-cells = <0>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi_flash_pins>;
++	status = "okay";
++	must_tx;
++	enhance_timing;
++	dma_ext;
++	ipm_design;
++	support_quad;
++	tick_dly = <2>;
++	sample_sel = <0>;
++
++	spi_nand@0 {
++		compatible = "spi-nand";
++		reg = <0>;
++		spi-max-frequency = <52000000>;
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "bl2";
++				reg = <0x0 0x100000>;
++			};
++
++			partition@100000 {
++				label = "u-boot-env";
++				reg = <0x100000 0x80000>;
++			};
++
++			partition@180000 {
++				label = "factory";
++				reg = <0x180000 0x200000>;
++			};
++
++			partition@380000 {
++				label = "bdinfo";
++				reg = <0x380000 0x40000>;
++			};
++
++			partition@3c0000 {
++				label = "fip";
++				reg = <0x3c0000 0x200000>;
++			};
++
++			partition@5c0000 {
++				label = "ubi";
++				reg = <0x5c0000 0x7a40000>;
++				compatible = "linux,ubi";
++			};
++		};
++	};
++};
++
++&uart0 {
++	mediatek,force-highspeed;
++	status = "okay";
++};
++
++&watchdog {
++	status = "disabled";
++};
+--- /dev/null
++++ b/cudy_tr3000-v1_env
+@@ -0,0 +1,54 @@
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x46000000
++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
++bootconf=config-1
++bootdelay=0
++bootfile=immortalwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-initramfs-recovery.itb
++bootfile_bl2=immortalwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-preloader.bin
++bootfile_fip=immortalwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-bl31-uboot.fip
++bootfile_upg=immortalwrt-mediatek-filogic-cudy_tr3000-v1-ubootmod-squashfs-sysupgrade.itb
++bootled_pwr=red:power
++bootled_rec=white:status
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format
++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"

package/boot/uboot-mediatek/patches/453-add-openwrt-one.patch

@@ -519,7 +519,7 @@
 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
 --- /dev/null
 +++ b/openwrt-one-spi-nand_env
-@@ -0,0 +1,60 @@
+@@ -0,0 +1,61 @@
 +ethaddr_factory=mtd read factory 0x46000000 0x0 0x20000 && env readmem -b ethaddr 0x4600002a 0x6 ; setenv ethaddr_factory
 +ipaddr=192.168.11.11
 +serverip=192.168.11.23
@@ -561,6 +561,7 @@
 +check_buttons=if button front ; then run boot_recovery ; run boot_tftp ; run led_loop_error ; else if button back ; then ; run usb_recover ; run led_loop_error ; fi ; fi
 +led_boot=led green on ; led white on ; led red on
 +led_done=led green on ; led white off ; led red off
++led_loop_done=led white off ; led green on ; echo done ; while true ; do  sleep 1 ; done
 +led_loop_error=led white off ; led green off ; while true ; do led red on ; sleep 1 ; led red off ; sleep 1 ; done
 +led_start=led white on ; led green off ; led red off
 +preboot=run led_boot

package/boot/uboot-mediatek/patches/460-add-routerich-ax3000.patch

@@ -1,6 +1,6 @@
 --- /dev/null
 +++ b/configs/mt7981_routerich_ax3000_defconfig
-@@ -0,0 +1,107 @@
+@@ -0,0 +1,108 @@
 +CONFIG_ARM=y
 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 +CONFIG_POSITION_INDEPENDENT=y

package/boot/uboot-rockchip/Makefile

@@ -236,6 +236,13 @@ define U-Boot/lyt-t68m-rk3568
     lyt_t68m
 endef
 
+define U-Boot/mmbox-anas3035-rk3568
+  $(U-Boot/rk3568/Default)
+  NAME:=MMBOX ANAS3035
+  BUILD_DEVICES:= \
+    mmbox_anas3035
+endef
+
 define U-Boot/mrkaio-m68s-rk3568
   $(U-Boot/rk3568/Default)
   NAME:=Mrkaio M68S
@@ -401,6 +408,7 @@ UBOOT_TARGETS := \
   fastrhino-r66s-rk3568 \
   fastrhino-r68s-rk3568 \
   lyt-t68m-rk3568 \
+  mmbox-anas3035-rk3568 \
   mrkaio-m68s-rk3568 \
   nanopi-r5c-rk3568 \
   nanopi-r5s-rk3568 \

package/boot/uboot-rockchip/patches/001-rockchip-board-Increase-rng-seed-size-to-make-it-sufficie.patch

@@ -1,29 +1,8 @@
+From ed4ae7386257aa66455e330234e513d098a36f84 Mon Sep 17 00:00:00 2001
 From: Alex Shumsky <alexthreed@gmail.com>
-To: u-boot@lists.denx.de
-Cc: Alex Shumsky <alexthreed@gmail.com>,
-	Dragan Simic <dsimic@manjaro.org>, Marek Vasut <marex@denx.de>,
-	Ben Wolsieffer <benwolsieffer@gmail.com>,
-	Caleb Connolly <caleb.connolly@linaro.org>,
-	Chris Morgan <macromorgan@hotmail.com>,
-	Devarsh Thakkar <devarsht@ti.com>,
-	Jagan Teki <jagan@amarulasolutions.com>,
-	Janne Grunau <j@jannau.net>,
-	Jerome Forissier <jerome.forissier@linaro.org>,
-	Jiaxun Yang <jiaxun.yang@flygoat.com>,
-	Jonas Karlman <jonas@kwiboo.se>,
-	Joshua Watt <jpewhacker@gmail.com>,
-	Kever Yang <kever.yang@rock-chips.com>,
-	Mattijs Korpershoek <mkorpershoek@baylibre.com>,
-	Neal Gompa <neal@gompa.dev>,
-	Philipp Tomsich <philipp.tomsich@theobroma-systems.com>,
-	Philipp Tomsich <philipp.tomsich@vrull.eu>,
-	Quentin Schulz <quentin.schulz@cherry.de>,
-	Rasmus Villemoes <rasmus.villemoes@prevas.dk>,
-	Simon Glass <sjg@chromium.org>, Stefan Roese <sr@denx.de>,
-	Tim Harvey <tharvey@gateworks.com>, Tom Rini <trini@konsulko.com>
-Subject: [PATCH v6] rockchip: board: Increase rng-seed size to make it sufficient for modern Linux
-Date: Wed, 16 Oct 2024 13:02:03 +0300	[thread overview]
-Message-ID: <20241016100203.629713-1-alexthreed@gmail.com> (raw)
+Date: Wed, 16 Oct 2024 13:02:03 +0300
+Subject: [PATCH] rockchip: board: Increase rng-seed size to make it sufficient
+ for modern Linux
 
 Increase rng-seed size to make Linux happy and initialize rng pool instantly.
 Linux 5.19+ requires 32 bytes of entropy to initialize random pool, but u-boot
@@ -46,27 +25,9 @@ Signed-off-by: Alex Shumsky <alexthreed@gmail.com>
 Fixes: d2048bafae40 ("rockchip: board: Add board_rng_seed() for all Rockchip devices")
 Reviewed-by: Dragan Simic <dsimic@manjaro.org>
 Reviewed-by: Marek Vasut <marex@denx.de>
+Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
+Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
 ---
-
-Changes in v6:
-- fix wording in docs and debug message
-
-Changes in v5:
-- add docs
-
-Changes in v4:
-- fix typos and code style
-
-Changes in v3:
-- reword warning
-- increase default rng_seed_size to support older linux as well
-- reword commit message
-
-Changes in v2:
-- add env config knob rng_seed_size
-- add warning for small rng_seed_size
-- 12-character commit SHA in Fixes
-
  arch/arm/mach-rockchip/board.c | 11 ++++++++++-
  common/Kconfig                 |  3 +++
  doc/usage/environment.rst      |  5 +++++

package/boot/uboot-rockchip/patches/002-scripts-dtc-pylibfdt-libfdt-i_shipped-Use-SWIG_AppendOutp.patch

@@ -0,0 +1,55 @@
+From a63456b9191fae2fe49f4b121e025792022e3950 Mon Sep 17 00:00:00 2001
+From: Markus Volk <f_l_k@t-online.de>
+Date: Wed, 30 Oct 2024 06:07:16 +0100
+Subject: [PATCH] scripts/dtc/pylibfdt/libfdt.i_shipped: Use SWIG_AppendOutput
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Swig has changed language specific AppendOutput functions. The helper
+macro SWIG_AppendOutput remains unchanged. Use that instead
+of SWIG_Python_AppendOutput, which would require an extra parameter
+since swig 4.3.0.
+
+/home/flk/poky/build-test/tmp/work/qemux86_64-poky-linux/u-boot/2024.10/git/arch/x86/cpu/u-boot-64.lds
+| scripts/dtc/pylibfdt/libfdt_wrap.c: In function ‘_wrap_fdt_next_node’:
+| scripts/dtc/pylibfdt/libfdt_wrap.c:5581:17: error: too few arguments to function ‘SWIG_Python_AppendOutput’
+|  5581 |     resultobj = SWIG_Python_AppendOutput(resultobj, val);
+|       |                 ^~~~~~~~~~~~~~~~~~~~~~~~
+
+Signed-off-by: Markus Volk <f_l_k@t-online.de>
+Reported-by: Rudi Heitbaum <rudi@heitbaum.com>
+Link: https://github.com/dgibson/dtc/pull/154
+---
+ scripts/dtc/pylibfdt/libfdt.i_shipped | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/scripts/dtc/pylibfdt/libfdt.i_shipped
++++ b/scripts/dtc/pylibfdt/libfdt.i_shipped
+@@ -1037,7 +1037,7 @@ typedef uint32_t fdt32_t;
+ 			fdt_string(fdt1, fdt32_to_cpu($1->nameoff)));
+ 		buff = PyByteArray_FromStringAndSize(
+ 			(const char *)($1 + 1), fdt32_to_cpu($1->len));
+-		resultobj = SWIG_Python_AppendOutput(resultobj, buff);
++		resultobj = SWIG_AppendOutput(resultobj, buff);
+ 	}
+ }
+ 
+@@ -1076,7 +1076,7 @@ typedef uint32_t fdt32_t;
+ 
+ %typemap(argout) int *depth {
+         PyObject *val = Py_BuildValue("i", *arg$argnum);
+-        resultobj = SWIG_Python_AppendOutput(resultobj, val);
++        resultobj = SWIG_AppendOutput(resultobj, val);
+ }
+ 
+ %apply int *depth { int *depth };
+@@ -1092,7 +1092,7 @@ typedef uint32_t fdt32_t;
+            if (PyTuple_GET_SIZE(resultobj) == 0)
+               resultobj = val;
+            else
+-              resultobj = SWIG_Python_AppendOutput(resultobj, val);
++              resultobj = SWIG_AppendOutput(resultobj, val);
+         }
+ }
+ 

package/boot/uboot-rockchip/patches/900-arm-add-dts-files.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
-@@ -87,6 +87,22 @@ dtb-$(CONFIG_ROCKCHIP_RK3368) += \
+@@ -87,6 +87,23 @@ dtb-$(CONFIG_ROCKCHIP_RK3368) += \
  	rk3368-geekbox.dtb \
  	rk3368-px5-evb.dtb \
  
@@ -13,6 +13,7 @@
 +
 +dtb-$(CONFIG_ROCKCHIP_RK3568) += \
 +	rk3568-armsom-sige3.dtb \
++	rk3568-mmbox-anas3035.dtb \
 +	rk3568-lyt-t68m.dtb \
 +	rk3568-mrkaio-m68s.dtb \
 +	rk3568-photonicat.dtb

package/boot/uboot-rockchip/src/arch/arm/dts/rk3568-mmbox-anas3035-u-boot.dtsi

@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rk356x-u-boot.dtsi"
+
+&sdhci {
+	mmc-ddr-1_8v;
+};
+
+&vcc5v0_usb_host {
+	/delete-property/ regulator-always-on;
+	/delete-property/ regulator-boot-on;
+};

package/boot/uboot-rockchip/src/arch/arm/dts/rk3568-mmbox-anas3035.dts

@@ -0,0 +1,769 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "MMBOX ANAS3035";
+	compatible = "mmbox,anas3035", "rockchip,rk3568";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_led_pin>, <&sata0_pins>, <&sata1_pins>, <&sata2_pins>;
+
+		power_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata0_led: led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DISK;
+			/* for to sata2 slot */
+			function-enumerator = <3>;
+			gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		sata1_led: led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DISK;
+			/* for to sata0 slot */
+			function-enumerator = <1>;
+			gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		sata2_led: led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DISK;
+			/* for to sata1 slot */
+			function-enumerator = <2>;
+			gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 80 128 175 230 255>;
+		fan-supply = <&vcc5v0_fan>;
+		pwms = <&pwm5 0 50000 0>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_pcie: regulator-vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_fan: regulator-vcc5v0-fan {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fan_pwr_en>;
+		regulator-name = "vcc5v0_fan";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sata: regulator-vcc5v0-sata {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sata_pwr_en>;
+		regulator-name = "vcc5v0_sata";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb_host: regulator-vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_trip_active_cool: cpu-trip-active-cool {
+			temperature = <20000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_low: cpu-trip-active-low {
+			temperature = <30000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_med: cpu-trip-active-med {
+			temperature = <40000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_high: cpu-trip-active-high {
+			temperature = <50000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_trip_active_hot: cpu-trip-active-hot {
+			temperature = <60000>;
+			hysteresis = <2000>;
+			type = "hot";
+		};
+	};
+
+	cooling-maps {
+		cpu-active-cool {
+			trip = <&cpu_trip_active_cool>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		cpu-active-low {
+			trip = <&cpu_trip_active_low>;
+			cooling-device = <&fan 1 2>;
+		};
+
+		cpu-active-med {
+			trip = <&cpu_trip_active_med>;
+			cooling-device = <&fan 2 3>;
+		};
+
+		cpu-active-high {
+			trip = <&cpu_trip_active_high>;
+			cooling-device = <&fan 3 4>;
+		};
+
+		cpu-active-hot {
+			trip = <&cpu_trip_active_hot>;
+			cooling-device = <&fan 4 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	fan {
+		fan_pwr_en: fan-pwr-en {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	gpio-leds {
+		power_led_pin: power-led-pin {
+			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sata {
+		sata_pwr_en: sata-pwr-en {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0-usb-host-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm5 {
+	status = "okay";
+};
+
+&sata0 {
+	phy-supply = <&vcc5v0_sata>;
+	status = "okay";
+};
+
+&sata1 {
+	phy-supply = <&vcc5v0_sata>;
+	status = "okay";
+};
+
+&sata2 {
+	phy-supply = <&vcc5v0_sata>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200_1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	extcon = <&usb2phy0>;
+	maximum-speed = "high-speed";
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	maximum-speed = "high-speed";
+	phys = <&usb2phy0_host>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};

package/boot/uboot-rockchip/src/configs/mmbox-anas3035-rk3568_defconfig

@@ -0,0 +1,77 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3568-mmbox-anas3035"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_SPL_SERIAL=y
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-mmbox-anas3035.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+# CONFIG_OF_UPSTREAM is not set
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_DWC_AHCI=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_RTL8169=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_ERRNO_STR=y

package/kernel/bcm27xx-gpu-fw/Makefile

@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=bcm27xx-gpu-fw
-PKG_VERSION:=2024.10.08
+PKG_VERSION:=2024.11.26
 PKG_VERSION_REAL:=1.$(subst .,,$(PKG_VERSION))
-PKG_RELEASE:=2
+PKG_RELEASE:=1
 
 PKG_SOURCE:=raspi-firmware_$(PKG_VERSION_REAL).orig.tar.xz
 PKG_SOURCE_URL:=https://github.com/raspberrypi/firmware/releases/download/$(PKG_VERSION_REAL)
-PKG_HASH:=11e7bedcd0f52729bbc82ae8de3cb3f52eb4ae3d6bdb3e11fbfdbea9c4a2b1c3
+PKG_HASH:=020dbcdbb30af5942a62fc3eb355449aba45276b67e864dee2522ff53fd936e6
 
 PKG_FLAGS:=nonshared
 

package/kernel/lantiq/vrx518_tc/Makefile

@@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=vrx518_tc
 PKG_VERSION:=1.5.12.4
-PKG_RELEASE:=3
+PKG_RELEASE:=4
 PKG_BASE_NAME:=vrx518_tc_drv
 
 UGW_VERSION=8.5.2.10

package/kernel/lantiq/vrx518_tc/patches/100-compat.patch

@@ -166,7 +166,7 @@
  
 -	return (skb->DW0 >> 3) & 0xF;
 +// 	return (skb->DW0 >> 3) & 0xF;
-+	return 1;
++	return 0;	/* We use only one connection for now, so return the first connection id */
  }
  
  static int atm_get_qid_by_vcc(struct net_device *dev, struct sk_buff *skb,

package/kernel/lantiq/vrx518_tc/patches/101-dcdp-atm_tc-drop-extra-qos-classes.patch

@@ -0,0 +1,144 @@
+Extra ATM traffic classes requires atm_qos struct extension and a set of
+new defines. What itself requires atm.h updates both in the kernel and
+in the toolchain. On another hand we do not have any real users of these
+traffic classes.
+
+In absence of real user there are no benefits to support this
+functionality. There is only the burden of maintenance of extra patches
+all around the building framework. So just drop these extra QoS traffic
+classes in order to facilitate maintenance and avoid side effects like
+breaking compatibility with existing userspace tools like linux-atm.
+
+Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
+--
+--- a/dcdp/atm_tc.c
++++ b/dcdp/atm_tc.c
+@@ -463,34 +463,9 @@ static void set_qsb(struct atm_priv *pri
+ 	/* Weighted Fair Queueing Factor (WFQF) */
+ 	switch (qos->txtp.traffic_class) {
+ 	case ATM_CBR:
+-	case ATM_VBR_RT:
+ 		/*  real time queue gets weighted fair queueing bypass  */
+ 		q_parm_tbl.bit.wfqf = 0;
+ 		break;
+-	case ATM_VBR_NRT:
+-	case ATM_UBR_PLUS:
+-		/*  WFQF calculation here is based on virtual cell rates,
+-		      to reduce granularity for high rates
+-		*/
+-		/*  WFQF is maximum cell rate / garenteed cell rate */
+-		/*  wfqf = qsb_minimum_cell_rate * QSB_WFQ_NONUBR_MAX /
+-			requested_minimum_peak_cell_rate
+-		*/
+-		if (qos->txtp.min_pcr == 0)
+-			q_parm_tbl.bit.wfqf = QSB_WFQ_NONUBR_MAX;
+-		else {
+-			tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX /
+-				qos->txtp.min_pcr;
+-			if (tmp == 0)
+-				q_parm_tbl.bit.wfqf = 1;
+-			else if (tmp > QSB_WFQ_NONUBR_MAX)
+-				q_parm_tbl.bit.wfqf
+-					= QSB_WFQ_NONUBR_MAX;
+-			else
+-				q_parm_tbl.bit.wfqf = tmp;
+-		}
+-		break;
+-
+ 	case ATM_UBR:
+ 	default:
+ 		q_parm_tbl.bit.wfqf = QSB_WFQ_UBR_BYPASS;
+@@ -498,42 +473,9 @@ static void set_qsb(struct atm_priv *pri
+ 	}
+ 
+ 	/* Sustained Cell Rate (SCR) Leaky Bucket Shaper VBR.0/VBR.1 */
+-	if (qos->txtp.traffic_class == ATM_VBR_RT ||
+-		qos->txtp.traffic_class == ATM_VBR_NRT) {
+-		if (qos->txtp.scr == 0) {
+-			/* disable shaper */
+-			q_vbr_parm_tbl.bit.taus = 0;
+-			q_vbr_parm_tbl.bit.ts = 0;
+-		} else {
+-			/* Cell Loss Priority  (CLP) */
+-			if ((vcc->atm_options & ATM_ATMOPT_CLP))
+-				/* CLP1 */
+-				q_parm_tbl.bit.vbr = 1;
+-			else
+-				/* CLP0 */
+-				q_parm_tbl.bit.vbr = 0;
+-			/* Rate Shaper Parameter (TS) and
+-			    Burst Tolerance Parameter for SCR (tauS)
+-			*/
+-			tmp = ((qsb_clk * param->qsb_tstep) >> 5) /
+-					qos->txtp.scr + 1;
+-			q_vbr_parm_tbl.bit.ts
+-				= tmp > QSB_TP_TS_MAX ? QSB_TP_TS_MAX : tmp;
+-			tmp = (qos->txtp.mbs - 1) *
+-				(q_vbr_parm_tbl.bit.ts -
+-					q_parm_tbl.bit.tp) / 64;
+-			if (tmp == 0)
+-				q_vbr_parm_tbl.bit.taus = 1;
+-			else if (tmp > QSB_TAUS_MAX)
+-				q_vbr_parm_tbl.bit.taus
+-					= QSB_TAUS_MAX;
+-			else
+-				q_vbr_parm_tbl.bit.taus = tmp;
+-		}
+-	} else {
+-		q_vbr_parm_tbl.bit.taus = 0;
+-		q_vbr_parm_tbl.bit.ts = 0;
+-	}
++	/* NB: shaper disabled since there no user interface to activate it */
++	q_vbr_parm_tbl.bit.taus = 0;
++	q_vbr_parm_tbl.bit.ts = 0;
+ 
+ 	/* Queue Parameter Table (QPT) */
+ 	tc_w32(QSB_QPT_SET_MASK, QSB_RTM);
+@@ -1064,15 +1006,6 @@ static int ppe_open(struct atm_vcc *vcc)
+ 	/* check bandwidth */
+ 	if ((vcc->qos.txtp.traffic_class == ATM_CBR &&
+ 		vcc->qos.txtp.max_pcr >
+-			(port->tx_max_cell_rate - port->tx_used_cell_rate))
+-		|| (vcc->qos.txtp.traffic_class == ATM_VBR_RT &&
+-		vcc->qos.txtp.max_pcr >
+-			(port->tx_max_cell_rate - port->tx_used_cell_rate))
+-		|| (vcc->qos.txtp.traffic_class == ATM_VBR_NRT &&
+-		vcc->qos.txtp.scr >
+-			(port->tx_max_cell_rate - port->tx_used_cell_rate))
+-		|| (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS &&
+-		vcc->qos.txtp.min_pcr >
+ 			(port->tx_max_cell_rate - port->tx_used_cell_rate))) {
+ 		tc_dbg(priv->tc_priv, MSG_INIT, "exceed TX line rate\n");
+ 		return -EINVAL;
+@@ -1128,15 +1061,8 @@ static int ppe_open(struct atm_vcc *vcc)
+ 	/*  reserve bandwidth */
+ 	switch (vcc->qos.txtp.traffic_class) {
+ 	case ATM_CBR:
+-	case ATM_VBR_RT:
+ 		port->tx_used_cell_rate += vcc->qos.txtp.max_pcr;
+ 		break;
+-	case ATM_VBR_NRT:
+-		port->tx_used_cell_rate += vcc->qos.txtp.scr;
+-		break;
+-	case ATM_UBR_PLUS:
+-		port->tx_used_cell_rate += vcc->qos.txtp.min_pcr;
+-		break;
+ 	}
+ 
+ 	/* update atm_vcc structure */
+@@ -1222,15 +1148,8 @@ static void ppe_close(struct atm_vcc *vc
+ 	/* release bandwidth */
+ 	switch (vcc->qos.txtp.traffic_class) {
+ 	case ATM_CBR:
+-	case ATM_VBR_RT:
+ 		port->tx_used_cell_rate -= vcc->qos.txtp.max_pcr;
+ 		break;
+-	case ATM_VBR_NRT:
+-		port->tx_used_cell_rate -= vcc->qos.txtp.scr;
+-		break;
+-	case ATM_UBR_PLUS:
+-		port->tx_used_cell_rate -= vcc->qos.txtp.min_pcr;
+-		break;
+ 	}
+ 
+ 	/* idle for a while to let parallel operation finish */

package/kernel/lantiq/vrx518_tc/patches/200-swplat.patch

@@ -3,7 +3,7 @@ This replaces it by a basic working implementation.
 
 --- a/dcdp/atm_tc.c
 +++ b/dcdp/atm_tc.c
-@@ -603,7 +603,11 @@ static void atm_aca_init(struct atm_priv
+@@ -545,7 +545,11 @@ static void atm_aca_init(struct atm_priv
  	cfg = &priv->tc_priv->cfg;
  
  	txin = &param.aca_txin;
@@ -15,7 +15,7 @@ This replaces it by a basic working implementation.
  	txin->hd_size_in_dw = cfg->txin.soc_desc_dwsz;
  	txin->pd_desc_base = SB_XBAR_ADDR(__ACA_TX_IN_PD_LIST_BASE);
  	txin->pd_desc_num = __ACA_TX_IN_PD_LIST_NUM;
-@@ -625,7 +629,11 @@ static void atm_aca_init(struct atm_priv
+@@ -567,7 +571,11 @@ static void atm_aca_init(struct atm_priv
  		txin->soc_cmlt_cnt_addr);
  
  	txout = &param.aca_txout;
@@ -27,7 +27,7 @@ This replaces it by a basic working implementation.
  	txout->hd_size_in_dw = cfg->txout.soc_desc_dwsz;
  	txout->pd_desc_base = SB_XBAR_ADDR(__ACA_TX_OUT_PD_LIST_BASE);
  	txout->pd_desc_num = __ACA_TX_OUT_PD_LIST_NUM;
-@@ -647,7 +655,11 @@ static void atm_aca_init(struct atm_priv
+@@ -589,7 +597,11 @@ static void atm_aca_init(struct atm_priv
  		txout->soc_cmlt_cnt_addr);
  
  	rxout = &param.aca_rxout;
@@ -39,7 +39,7 @@ This replaces it by a basic working implementation.
  	rxout->hd_size_in_dw = cfg->rxout.soc_desc_dwsz;
  	rxout->pd_desc_base = SB_XBAR_ADDR(__ACA_RX_OUT_PD_LIST_BASE);
  	rxout->pd_desc_num = __ACA_RX_OUT_PD_LIST_NUM;
-@@ -669,7 +681,11 @@ static void atm_aca_init(struct atm_priv
+@@ -611,7 +623,11 @@ static void atm_aca_init(struct atm_priv
  		rxout->soc_cmlt_cnt_addr);
  
  	rxin = &param.aca_rxin;
@@ -51,7 +51,7 @@ This replaces it by a basic working implementation.
  	rxin->hd_size_in_dw = cfg->rxin.soc_desc_dwsz;
  	rxin->pd_desc_base = SB_XBAR_ADDR(__RX_IN_PD_DES_LIST_BASE);
  	rxin->pd_desc_num = __ACA_RX_IN_PD_LIST_NUM;
-@@ -1261,7 +1277,7 @@ static int ppe_ioctl(struct atm_dev *dev
+@@ -1180,7 +1196,7 @@ static int ppe_ioctl(struct atm_dev *dev
  static int ppe_send(struct atm_vcc *vcc, struct sk_buff *skb)
  {
  	int ret, qid, mpoa_pt, mpoa_type, vid;
@@ -60,7 +60,7 @@ This replaces it by a basic working implementation.
  	struct atm_priv *priv;
  
  	if (!vcc) {
-@@ -1327,12 +1343,14 @@ static int ppe_send(struct atm_vcc *vcc,
+@@ -1246,12 +1262,14 @@ static int ppe_send(struct atm_vcc *vcc,
  	tc_dbg(priv->tc_priv, MSG_TX, "vid: 0x%x, qid: 0x%x\n",
  			vid, qid);
  
@@ -855,12 +855,12 @@ This replaces it by a basic working implementation.
 -			continue;
 +
 +		// this seems to be a pointer to a DS PKT buffer
-+		phyaddr = desc->data_ptr + desc->byte_off;
++		phyaddr = desc->data_ptr;
 +		ptr = plat_mem_virt(phyaddr);
-+
 +		len = desc->data_len;
 +
-+		dma_sync_single_range_for_cpu(pdev, phyaddr, 0, len, DMA_FROM_DEVICE);
++		dma_sync_single_for_cpu(pdev, phyaddr, desc->byte_off + len,
++					DMA_FROM_DEVICE);
 +
 +		skb = netdev_alloc_skb(g_plat_priv->netdev, len);
 +		if (unlikely(!skb)) {
@@ -871,7 +871,7 @@ This replaces it by a basic working implementation.
 -		ring_idx_inc(rxout, idx);
 +
 +		dst = skb_put(skb, len);
-+		memcpy(dst, ptr, len);
++		memcpy(dst, ptr + desc->byte_off, len);
 +
 +		priv->tc_ops.recv(g_plat_priv->netdev, skb);
 +

package/kernel/lantiq/vrx518_tc/patches/202-napi.patch

@@ -296,7 +296,7 @@
  	priv->tc_ops.umt_start = plat_umt_start;
 --- a/dcdp/atm_tc.c
 +++ b/dcdp/atm_tc.c
-@@ -3650,7 +3650,7 @@ static void atm_aca_ring_config_init(str
+@@ -3569,7 +3569,7 @@ static void atm_aca_ring_config_init(str
  static int atm_ring_init(struct atm_priv *priv)
  {
  	atm_aca_ring_config_init(priv);
@@ -305,7 +305,7 @@
  }
  
  static int atm_init(struct tc_priv *tcpriv, u32 ep_id)
-@@ -4020,7 +4020,7 @@ void atm_tc_unload(void)
+@@ -3939,7 +3939,7 @@ void atm_tc_unload(void)
  	/* unregister device */
  	if (priv->tc_priv->tc_ops.dev_unreg != NULL)
  		priv->tc_priv->tc_ops.dev_unreg(NULL,

package/kernel/lantiq/vrx518_tc/patches/204-dcdp-atm_tc-fix-compilation-warning.patch

@@ -1,6 +1,6 @@
 --- a/dcdp/atm_tc.c
 +++ b/dcdp/atm_tc.c
-@@ -746,7 +746,8 @@ static void atm_aca_init(struct atm_priv
+@@ -688,7 +688,8 @@ static void atm_aca_init(struct atm_priv
  		ACA_TXOUT_EN | ACA_RXIN_EN | ACA_RXOUT_EN, 1);
  }
  
@@ -10,7 +10,7 @@
  {
  	struct tm nowtm;
  	char tmbuf[64];
-@@ -765,7 +766,8 @@ static int print_datetime(char *buffer,
+@@ -707,7 +708,8 @@ static int print_datetime(char *buffer,
  			nowtm.tm_hour,
  			nowtm.tm_min,
  			nowtm.tm_sec);
@@ -20,7 +20,7 @@
  
  	return 0;
  }
-@@ -967,7 +969,7 @@ void show_atm_pvc(struct seq_file *seq,
+@@ -909,7 +911,7 @@ void show_atm_pvc(struct seq_file *seq,
  	char buf[64];
  
  	seq_printf(seq, "\tNet device: %s\n", pvc->dev->name);

package/kernel/lantiq/vrx518_tc/patches/207-dcdp-atm_tc-fix-crash-on-subif_reg-absence.patch

@@ -0,0 +1,75 @@
+From: Sergey Ryazanov <ryazanov.s.a@gmail.com>
+Date: Fri, 10 Jan 2025 00:57:27 +0000
+Subject: [PATCH] vrx518_tc: atm_tc: fix crash on subif_reg absence
+
+VRX518 (sw_plat) platform does not provid the subif_reg/subif_unreg ops
+in the same time ATM TC layer unconditionally calls them, what leads to
+the kernel crash on the atm_hook_mpoa_setup hook invocation from the ATM
+stack:
+
+  vrx518_tc:mpoa_setup_sync : sync: conn: 0, vpi: 0, vci: 35, mpoa_type: 0, mpoa_mode: 0
+  Unable to handle kernel NULL pointer dereference at virtual address 00000000
+
+Subif registration is optional and PTM TC do this only when the
+corresponding ops are defined. Do the same for ATM TC and call
+subif_reg/subif_unreg only if they are not NULL.
+
+While at it, move subif related data preparation under the 'if' block
+in order to group and isolate that aux code.
+
+Run tested with FRITZ!Box 7530.
+
+Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
+---
+--- a/dcdp/atm_tc.c
++++ b/dcdp/atm_tc.c
+@@ -1158,8 +1158,9 @@ static void ppe_close(struct atm_vcc *vc
+ 		validate_oam_htu_entry(priv, 0);
+ 	spin_unlock_bh(&priv->atm_lock);
+ 
+-	priv->tc_priv->tc_ops.subif_unreg(dev, (!dev) ? dev_name : dev->name,
+-					priv->conn[cid].subif_id, 0);
++	if (priv->tc_priv->tc_ops.subif_unreg)
++		priv->tc_priv->tc_ops.subif_unreg(dev, (!dev) ? dev_name : dev->name,
++						  priv->conn[cid].subif_id, 0);
+ 				
+ 	memset(conn, 0, sizeof(*conn));
+ 
+@@ -2710,24 +2711,26 @@ static void mpoa_setup_sync(struct atm_p
+ 	struct wtx_queue_config_t tx_qcfg;
+ 	struct uni_cell_header *cell_header;
+ 	struct atm_vcc *vcc;
+-	struct net_device *dev;
+-	char dev_name[32];
+ 
+ 	tc_dbg(priv->tc_priv, MSG_INIT,
+ 		"sync: conn: %d, vpi: %d, vci: %d, mpoa_type: %d, mpoa_mode: %d\n",
+ 		conn, priv->conn[conn].vcc->vpi, priv->conn[conn].vcc->vci,
+ 		priv->conn[conn].mpoa_type, priv->conn[conn].mpoa_mode);
+ 
+-	dev = priv->conn[conn].dev;
++	if (priv->tc_priv->tc_ops.subif_reg) {
++		struct net_device *dev;
++		char dev_name[32];
++
++		dev = priv->conn[conn].dev;
++		if (!dev)
++			sprintf(dev_name, "atm_%d%d",
++				priv->conn[conn].vcc->vpi, priv->conn[conn].vcc->vci);
+ 
+-	if (!dev)
+-		sprintf(dev_name, "atm_%d%d",
+-			priv->conn[conn].vcc->vpi, priv->conn[conn].vcc->vci);
+-
+-	priv->tc_priv->tc_ops.subif_reg(dev, (!dev) ? dev_name : dev->name,
+-				&priv->conn[conn].subif_id, 0);
+-	tc_dbg(priv->tc_priv, MSG_INIT,
+-		"conn[%d]subif_id[%x]", conn, priv->conn[conn].subif_id);
++		priv->tc_priv->tc_ops.subif_reg(dev, !dev ? dev_name : dev->name,
++						&priv->conn[conn].subif_id, 0);
++		tc_dbg(priv->tc_priv, MSG_INIT,
++		       "conn[%d]subif_id[%x]", conn, priv->conn[conn].subif_id);
++	}
+ 	vcc = priv->conn[conn].vcc;
+ 
+ 	/*  set htu entry   */

package/kernel/linux/modules/leds.mk

@@ -147,6 +147,24 @@ endef
 $(eval $(call KernelPackage,leds-apu))
 
 
+define KernelPackage/leds-ktd202x
+  SUBMENU:=LED modules
+  TITLE:=LED support for KTD202x Chips
+  DEPENDS:=+kmod-i2c-core +kmod-regmap-i2c
+  KCONFIG:=CONFIG_LEDS_KTD202X
+  FILES:= $(LINUX_DIR)/drivers/leds/rgb/leds-ktd202x.ko
+  AUTOLOAD:=$(call AutoProbe,leds-ktd202x,1)
+endef
+
+define KernelPackage/leds-ktd202x/description
+  This option enables support for the Kinetic KTD2026/KTD2027
+  RGB/White LED driver found in different BQ mobile phones.
+  It is a 3 or 4 channel LED driver programmed via an I2C interface.
+endef
+
+$(eval $(call KernelPackage,leds-ktd202x))
+
+
 define KernelPackage/leds-mlxcpld
   SUBMENU:=$(LEDS_MENU)
   TITLE:=LED support for the Mellanox boards

package/kernel/linux/modules/netdevices.mk

@@ -447,9 +447,10 @@ $(eval $(call KernelPackage,phy-micrel))
 define KernelPackage/phy-realtek
    SUBMENU:=$(NETWORK_DEVICES_MENU)
    TITLE:=Realtek Ethernet PHY driver
-   KCONFIG:=CONFIG_REALTEK_PHY
-   DEPENDS:=+kmod-libphy
-   FILES:=$(LINUX_DIR)/drivers/net/phy/realtek.ko
+   KCONFIG:=CONFIG_REALTEK_PHY \
+    CONFIG_REALTEK_PHY_HWMON=y
+   DEPENDS:=+kmod-libphy +kmod-hwmon-core
+   FILES:=$(LINUX_DIR)/drivers/net/phy/realtek/realtek.ko
    AUTOLOAD:=$(call AutoLoad,18,realtek,1)
 endef
 
@@ -575,6 +576,23 @@ endef
 
 $(eval $(call KernelPackage,dsa-b53-mdio))
 
+define KernelPackage/dsa-mv88e6060
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  TITLE:=Marvell MV88E6060 DSA Switch
+  DEPENDS:=+kmod-dsa +kmod-phy-marvell
+  KCONFIG:=CONFIG_NET_DSA_TAG_TRAILER \
+  CONFIG_NET_DSA_MV88E6060
+  FILES:= \
+  $(LINUX_DIR)/drivers/net/dsa/mv88e6060.ko \
+  $(LINUX_DIR)/net/dsa/tag_trailer.ko
+  AUTOLOAD:=$(call AutoLoad,41,mv88e6060,1)
+endef
+
+define KernelPackage/dsa-mv88e6060/description
+  Kernel modules for MV88E6060 DSA switches
+endef
+
+$(eval $(call KernelPackage,dsa-mv88e6060))
 
 define KernelPackage/dsa-tag-dsa
   SUBMENU:=$(NETWORK_DEVICES_MENU)

package/kernel/linux/modules/netfilter.mk

@@ -1048,6 +1048,40 @@ endef
 $(eval $(call KernelPackage,nfnetlink-queue))
 
 
+define KernelPackage/nfnetlink-cthelper
+  TITLE:=Netfilter User space conntrack helpers
+  FILES:=$(LINUX_DIR)/net/netfilter/nfnetlink_cthelper.ko
+  KCONFIG:=CONFIG_NF_CT_NETLINK_HELPER
+  AUTOLOAD:=$(call AutoProbe,nfnetlink_cthelper)
+  $(call AddDepends/nfnetlink,+kmod-nfnetlink-queue +kmod-nf-conntrack-netlink)
+endef
+
+define KernelPackage/nfnetlink-cthelper/description
+ Kernel modules support for a netlink-based connection tracking
+ userspace helpers interface
+endef
+
+$(eval $(call KernelPackage,nfnetlink-cthelper))
+
+
+define KernelPackage/nfnetlink-cttimeout
+  TITLE:=Netfilter conntrack expectation timeout
+  FILES:=$(LINUX_DIR)/net/netfilter/nfnetlink_cttimeout.ko
+  KCONFIG:=CONFIG_NF_CT_NETLINK_TIMEOUT
+  AUTOLOAD:=$(call AutoProbe,nfnetlink_cttimeout)
+  $(call AddDepends/nfnetlink,+kmod-nf-conntrack @KERNEL_NF_CONNTRACK_TIMEOUT)
+endef
+
+define KernelPackage/nfnetlink-cttimeout/description
+ Kernel modules support for a netlink-based connection tracking
+ userspace timeout interface
+
+ Requires CONFIG_NF_CONNTRACK_TIMEOUT (only enabled for non-small flash devices)
+endef
+
+$(eval $(call KernelPackage,nfnetlink-cttimeout))
+
+
 define KernelPackage/nf-conntrack-netlink
   TITLE:=Connection tracking netlink interface
   FILES:=$(LINUX_DIR)/net/netfilter/nf_conntrack_netlink.ko

package/kernel/linux/modules/netsupport.mk

@@ -1026,7 +1026,7 @@ endef
 $(eval $(call KernelPackage,bpf-test))
 
 
-SCHED_MODULES_EXTRA = sch_codel sch_gred sch_multiq sch_sfq sch_teql sch_fq act_pedit act_simple act_skbmod act_csum em_cmp em_nbyte em_meta em_text
+SCHED_MODULES_EXTRA = sch_codel sch_gred sch_multiq sch_sfq sch_teql sch_fq sch_ets act_pedit act_simple act_skbmod act_csum em_cmp em_nbyte em_meta em_text
 SCHED_FILES_EXTRA = $(foreach mod,$(SCHED_MODULES_EXTRA),$(LINUX_DIR)/net/sched/$(mod).ko)
 
 define KernelPackage/sched
@@ -1040,6 +1040,7 @@ define KernelPackage/sched
 	CONFIG_NET_SCH_SFQ \
 	CONFIG_NET_SCH_TEQL \
 	CONFIG_NET_SCH_FQ \
+	CONFIG_NET_SCH_ETS \
 	CONFIG_NET_ACT_PEDIT \
 	CONFIG_NET_ACT_SIMP \
 	CONFIG_NET_ACT_SKBMOD \

package/kernel/linux/modules/usb.mk

@@ -519,6 +519,23 @@ endef
 $(eval $(call KernelPackage,usb-dwc3))
 
 
+define KernelPackage/usb-dwc3-octeon
+  TITLE:=DWC3 Cavium Octeon USB driver
+  DEPENDS:=@TARGET_octeon +kmod-usb-dwc3
+  KCONFIG:= CONFIG_USB_DWC3_OCTEON
+  FILES:= $(LINUX_DIR)/drivers/usb/dwc3/dwc3-octeon.ko
+  AUTOLOAD:=$(call AutoProbe,dwc3-octeon,1)
+  $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-dwc3-octeon/description
+  This driver adds support for Cavium Octeon platforms with DesignWare
+  Core USB3 IP.
+endef
+
+$(eval $(call KernelPackage,usb-dwc3-octeon))
+
+
 define KernelPackage/usb-dwc3-qcom
   TITLE:=DWC3 Qualcomm USB driver
   DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax) +kmod-usb-dwc3
@@ -1721,7 +1738,7 @@ $(eval $(call KernelPackage,usbip-server))
 
 define KernelPackage/usb-chipidea
   TITLE:=Host and device support for Chipidea controllers
-  DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ath79 +kmod-usb-ehci +kmod-usb-phy-nop +kmod-usb-roles
+  DEPENDS:=+USB_GADGET_SUPPORT:kmod-usb-gadget @TARGET_ath79 +kmod-usb-ehci +kmod-usb-phy-nop +kmod-usb-roles +kmod-phy-ath79-usb
   KCONFIG:= \
 	CONFIG_EXTCON \
 	CONFIG_USB_CHIPIDEA \

package/kernel/mac80211/Makefile

@@ -10,13 +10,13 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=6.11.2
+PKG_VERSION:=6.12.6
 PKG_RELEASE:=1
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=COPYING
 
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources/
-PKG_HASH:=700ea5abef8dde9e3c6df2acd32ff443da735d773d56db9a80269e2237549b34
+PKG_HASH:=28ec39425a1b3270e1422d92a8131a6a3d8919cc13e8ee250c315e55d922ba68
 
 PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(BUILD_VARIANT),$(PKG_NAME)-$(BUILD_VARIANT)/)backports-$(PKG_VERSION)

package/kernel/mac80211/patches/ath/431-add_platform_eeprom_support_to_ath5k.patch

@@ -8,7 +8,7 @@
  #include "../ath.h"
  #include "ath5k.h"
  #include "debug.h"
-@@ -71,7 +72,7 @@ static void ath5k_pci_read_cachesize(str
+@@ -73,7 +74,7 @@ static void ath5k_pci_read_cachesize(str
  }
  
  /*
@@ -17,7 +17,7 @@
   */
  static bool
  ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data)
-@@ -79,6 +80,19 @@ ath5k_pci_eeprom_read(struct ath_common
+@@ -81,6 +82,19 @@ ath5k_pci_eeprom_read(struct ath_common
  	struct ath5k_hw *ah = common->ah;
  	u32 status, timeout;
  
@@ -37,7 +37,7 @@
  	/*
  	 * Initialize EEPROM access
  	 */
-@@ -122,6 +136,16 @@ static int ath5k_pci_eeprom_read_mac(str
+@@ -124,6 +138,16 @@ static int ath5k_pci_eeprom_read_mac(str
  	u16 data;
  	int octet;
  

package/kernel/mac80211/patches/ath12k/001-wifi-ath12k-add-11d-scan-offload-support-and-handle-country-code-for-WCN7850.patch

@@ -451,7 +451,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  enum ath12k_dev_flags {
  	ATH12K_CAC_RUNNING,
  	ATH12K_FLAG_CRASH_FLUSH,
-@@ -313,6 +319,8 @@ struct ath12k_vif_iter {
+@@ -319,6 +325,8 @@ struct ath12k_vif_iter {
  #define ATH12K_RX_RATE_TABLE_11AX_NUM	576
  #define ATH12K_RX_RATE_TABLE_NUM 320
  
@@ -460,7 +460,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  struct ath12k_rx_peer_rate_stats {
  	u64 ht_mcs_count[HAL_RX_MAX_MCS_HT + 1];
  	u64 vht_mcs_count[HAL_RX_MAX_MCS_VHT + 1];
-@@ -648,6 +656,13 @@ struct ath12k {
+@@ -654,6 +662,13 @@ struct ath12k {
  	u32 freq_low;
  	u32 freq_high;
  
@@ -474,7 +474,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  	bool nlo_enabled;
  };
  
-@@ -880,6 +895,8 @@ struct ath12k_base {
+@@ -886,6 +901,8 @@ struct ath12k_base {
  	/* continuous recovery fail count */
  	atomic_t fail_cont_count;
  	unsigned long reset_fail_timeout;
@@ -485,7 +485,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  		u32 fw_crash_counter;
 --- a/drivers/net/wireless/ath/ath12k/mac.c
 +++ b/drivers/net/wireless/ath/ath12k/mac.c
-@@ -2946,6 +2946,11 @@ static void ath12k_bss_assoc(struct ath1
+@@ -2949,6 +2949,11 @@ static void ath12k_bss_assoc(struct ath1
  	if (ret)
  		ath12k_warn(ar->ab, "failed to set vdev %i OBSS PD parameters: %d\n",
  			    arvif->vdev_id, ret);
@@ -497,7 +497,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  }
  
  static void ath12k_bss_disassoc(struct ath12k *ar,
-@@ -3521,7 +3526,7 @@ void __ath12k_mac_scan_finish(struct ath
+@@ -3524,7 +3529,7 @@ void __ath12k_mac_scan_finish(struct ath
  		ar->scan_channel = NULL;
  		ar->scan.roc_freq = 0;
  		cancel_delayed_work(&ar->scan.timeout);
@@ -506,9 +506,9 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  		break;
  	}
  }
-@@ -3782,7 +3787,12 @@ scan:
+@@ -3790,7 +3795,12 @@ scan:
  
- 	ret = ath12k_start_scan(ar, &arg);
+ 	ret = ath12k_start_scan(ar, arg);
  	if (ret) {
 -		ath12k_warn(ar->ab, "failed to start hw scan: %d\n", ret);
 +		if (ret == -EBUSY)
@@ -520,7 +520,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  		spin_lock_bh(&ar->data_lock);
  		ar->scan.state = ATH12K_SCAN_IDLE;
  		spin_unlock_bh(&ar->data_lock);
-@@ -3801,6 +3811,11 @@ exit:
+@@ -3810,6 +3820,11 @@ exit:
  
  	mutex_unlock(&ar->conf_mutex);
  
@@ -532,7 +532,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  	return ret;
  }
  
-@@ -5985,7 +6000,7 @@ static int ath12k_mac_start(struct ath12
+@@ -5994,7 +6009,7 @@ static int ath12k_mac_start(struct ath12
  
  	/* TODO: Do we need to enable ANI? */
  
@@ -541,7 +541,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  
  	ar->num_started_vdevs = 0;
  	ar->num_created_vdevs = 0;
-@@ -6165,6 +6180,9 @@ static void ath12k_mac_stop(struct ath12
+@@ -6174,6 +6189,9 @@ static void ath12k_mac_stop(struct ath12
  	cancel_delayed_work_sync(&ar->scan.timeout);
  	cancel_work_sync(&ar->regd_update_work);
  	cancel_work_sync(&ar->ab->rfkill_work);
@@ -551,7 +551,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  
  	spin_lock_bh(&ar->data_lock);
  	list_for_each_entry_safe(ppdu_stats, tmp, &ar->ppdu_stats_info, list) {
-@@ -6411,6 +6429,117 @@ static void ath12k_mac_op_update_vif_off
+@@ -6420,6 +6438,117 @@ static void ath12k_mac_op_update_vif_off
  	ath12k_mac_update_vif_offload(arvif);
  }
  
@@ -669,7 +669,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  static int ath12k_mac_vdev_create(struct ath12k *ar, struct ieee80211_vif *vif)
  {
  	struct ath12k_hw *ah = ar->ah;
-@@ -6525,6 +6654,7 @@ static int ath12k_mac_vdev_create(struct
+@@ -6534,6 +6663,7 @@ static int ath12k_mac_vdev_create(struct
  				    arvif->vdev_id, ret);
  			goto err_peer_del;
  		}
@@ -677,7 +677,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  		break;
  	case WMI_VDEV_TYPE_STA:
  		param_id = WMI_STA_PS_PARAM_RX_WAKE_POLICY;
-@@ -6563,6 +6693,13 @@ static int ath12k_mac_vdev_create(struct
+@@ -6572,6 +6702,13 @@ static int ath12k_mac_vdev_create(struct
  				    arvif->vdev_id, ret);
  			goto err_peer_del;
  		}
@@ -691,7 +691,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  		break;
  	default:
  		break;
-@@ -6903,6 +7040,11 @@ static void ath12k_mac_op_remove_interfa
+@@ -6912,6 +7049,11 @@ static void ath12k_mac_op_remove_interfa
  	ath12k_dbg(ab, ATH12K_DBG_MAC, "mac remove interface (vdev %d)\n",
  		   arvif->vdev_id);
  
@@ -703,7 +703,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
  		ret = ath12k_peer_delete(ar, arvif->vdev_id, vif->addr);
  		if (ret)
-@@ -7743,6 +7885,14 @@ ath12k_mac_op_unassign_vif_chanctx(struc
+@@ -7752,6 +7894,14 @@ ath12k_mac_op_unassign_vif_chanctx(struc
  	    ar->num_started_vdevs == 1 && ar->monitor_vdev_created)
  		ath12k_mac_monitor_stop(ar);
  
@@ -718,7 +718,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  	mutex_unlock(&ar->conf_mutex);
  }
  
-@@ -8281,6 +8431,14 @@ ath12k_mac_op_reconfig_complete(struct i
+@@ -8290,6 +8440,14 @@ ath12k_mac_op_reconfig_complete(struct i
  		ath12k_warn(ar->ab, "pdev %d successfully recovered\n",
  			    ar->pdev->pdev_id);
  
@@ -733,7 +733,7 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  		if (ab->is_reset) {
  			recovery_count = atomic_inc_return(&ab->recovery_count);
  
-@@ -9330,6 +9488,9 @@ static void ath12k_mac_setup(struct ath1
+@@ -9339,6 +9497,9 @@ static void ath12k_mac_setup(struct ath1
  
  	INIT_WORK(&ar->wmi_mgmt_tx_work, ath12k_mgmt_over_wmi_tx_work);
  	skb_queue_head_init(&ar->wmi_mgmt_tx_queue);
@@ -888,36 +888,36 @@ Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
  #endif
 --- a/drivers/net/wireless/ath/ath12k/hw.c
 +++ b/drivers/net/wireless/ath/ath12k/hw.c
-@@ -926,6 +926,7 @@ static const struct ath12k_hw_params ath
- 		.supports_dynamic_smps_6ghz = true,
- 
+@@ -928,6 +928,7 @@ static const struct ath12k_hw_params ath
  		.iova_mask = 0,
+ 
+ 		.supports_aspm = false,
 +		.current_cc_support = false,
  	},
  	{
  		.name = "wcn7850 hw2.0",
-@@ -1004,6 +1005,7 @@ static const struct ath12k_hw_params ath
- 		.supports_dynamic_smps_6ghz = false,
- 
+@@ -1008,6 +1009,7 @@ static const struct ath12k_hw_params ath
  		.iova_mask = ATH12K_PCIE_MAX_PAYLOAD_SIZE - 1,
+ 
+ 		.supports_aspm = true,
 +		.current_cc_support = true,
  	},
  	{
  		.name = "qcn9274 hw2.0",
-@@ -1078,6 +1080,7 @@ static const struct ath12k_hw_params ath
- 		.supports_dynamic_smps_6ghz = true,
- 
+@@ -1084,6 +1086,7 @@ static const struct ath12k_hw_params ath
  		.iova_mask = 0,
+ 
+ 		.supports_aspm = false,
 +		.current_cc_support = false,
  	},
  };
  
 --- a/drivers/net/wireless/ath/ath12k/hw.h
 +++ b/drivers/net/wireless/ath/ath12k/hw.h
-@@ -189,6 +189,7 @@ struct ath12k_hw_params {
- 	bool tcl_ring_retry:1;
+@@ -190,6 +190,7 @@ struct ath12k_hw_params {
  	bool reoq_lut_support:1;
  	bool supports_shadow_regs:1;
+ 	bool supports_aspm:1;
 +	bool current_cc_support:1;
  
  	u32 num_tcl_banks;

package/kernel/mac80211/patches/ath5k/432-ath5k_add_pciids.patch

@@ -1,11 +0,0 @@
---- a/drivers/net/wireless/ath/ath5k/pci.c
-+++ b/drivers/net/wireless/ath/ath5k/pci.c
-@@ -47,6 +47,8 @@ static const struct pci_device_id ath5k_
- 	{ PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
- 	{ PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
- 	{ PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
-+	{ PCI_VDEVICE(ATHEROS, 0xff16) }, /* 2413,2414 sx76x on lantiq_danube */
-+	{ PCI_VDEVICE(ATHEROS, 0xff1a) }, /* 2417 arv45xx on lantiq_danube */
- 	{ PCI_VDEVICE(ATHEROS, 0xff1b) }, /* AR5BXB63 */
- 	{ 0 }
- };

package/kernel/mac80211/patches/ath9k/356-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch

@@ -8,7 +8,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
 
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -2977,7 +2977,8 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2975,7 +2975,8 @@ void ath9k_hw_apply_txpower(struct ath_h
  {
  	struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
  	struct ieee80211_channel *channel;
@@ -18,7 +18,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411.
  	u16 ctl = NO_CTL;
  
  	if (!chan)
-@@ -2989,9 +2990,14 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2987,9 +2988,14 @@ void ath9k_hw_apply_txpower(struct ath_h
  	channel = chan->chan;
  	chan_pwr = min_t(int, channel->max_power * 2, MAX_COMBINED_POWER);
  	new_pwr = min_t(int, chan_pwr, reg->power_limit);

package/kernel/mac80211/patches/ath9k/365-ath9k-adjust-tx-power-reduction-for-US-regulatory-do.patch

@@ -11,7 +11,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/drivers/net/wireless/ath/ath9k/hw.c
 +++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -2996,6 +2996,10 @@ void ath9k_hw_apply_txpower(struct ath_h
+@@ -2994,6 +2994,10 @@ void ath9k_hw_apply_txpower(struct ath_h
  	if (ant_gain > max_gain)
  		ant_reduction = ant_gain - max_gain;
  

package/kernel/mac80211/patches/brcm/060-v6.13-wifi-brcmfmac-Add-optional-lpo-clock-enable-support.patch

@@ -81,7 +81,7 @@ Link: https://patch.msgid.link/20240910-wireless-mainline-v14-3-9d80fea5326d@wes
  	const char *prop;
  	int irq;
  	int err;
-@@ -106,7 +108,7 @@ void brcmf_of_probe(struct device *dev,
+@@ -106,15 +108,22 @@ void brcmf_of_probe(struct device *dev,
  		board_type = devm_kstrdup(dev, tmp, GFP_KERNEL);
  		if (!board_type) {
  			of_node_put(root);
@@ -90,9 +90,8 @@ Link: https://patch.msgid.link/20240910-wireless-mainline-v14-3-9d80fea5326d@wes
  		}
  		strreplace(board_type, '/', '-');
  		settings->board_type = board_type;
-@@ -114,8 +116,15 @@ void brcmf_of_probe(struct device *dev,
- 		of_node_put(root);
  	}
+ 	of_node_put(root);
  
 +	clk = devm_clk_get_optional_enabled(dev, "lpo");
 +	if (IS_ERR(clk))
@@ -107,7 +106,7 @@ Link: https://patch.msgid.link/20240910-wireless-mainline-v14-3-9d80fea5326d@wes
  
  	err = brcmf_of_get_country_codes(dev, settings);
  	if (err)
-@@ -124,23 +133,25 @@ void brcmf_of_probe(struct device *dev,
+@@ -123,23 +132,25 @@ void brcmf_of_probe(struct device *dev,
  	of_get_mac_address(np, settings->mac);
  
  	if (bus_type != BRCMF_BUSTYPE_SDIO)

package/kernel/mac80211/patches/brcm/863-brcmfmac-add-in-driver-tables-with-country-codes.patch

@@ -49,7 +49,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
  int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
  		   struct brcmf_mp_device *settings)
  {
-@@ -123,6 +153,8 @@ int brcmf_of_probe(struct device *dev, e
+@@ -122,6 +152,8 @@ int brcmf_of_probe(struct device *dev, e
  	brcmf_dbg(INFO, "%s LPO clock\n", clk ? "enable" : "no");
  	clk_set_rate(clk, 32768);
  

package/kernel/mac80211/patches/build/070-remove-broken-wext-select.patch

@@ -1,10 +0,0 @@
---- a/drivers/staging/rtl8723bs/Kconfig
-+++ b/drivers/staging/rtl8723bs/Kconfig
-@@ -5,7 +5,6 @@ config RTL8723BS
- 	depends on m
- 	depends on WLAN && MMC && CFG80211
- 	depends on m
--	select CFG80211_WEXT
- 	depends on CRYPTO
- 	select BPAUTO_CRYPTO_LIB_ARC4
- 	help

package/kernel/mac80211/patches/build/120-headers_version_fix.patch

@@ -1,14 +0,0 @@
---- a/backport-include/net/dropreason.h
-+++ b/backport-include/net/dropreason.h
-@@ -3,10 +3,9 @@
- 
- #include <linux/version.h>
- 
-+#include <net/dropreason-core.h>
- #if LINUX_VERSION_IS_GEQ(6,0,0)
- #include_next <net/dropreason.h>
--#else
--#include <net/dropreason-core.h>
- #endif
- 
- #if LINUX_VERSION_IS_LESS(6,4,0)

package/kernel/mac80211/patches/build/140-trace_backport.patch

@@ -1,6 +1,6 @@
 --- a/drivers/bus/mhi/host/trace.h
 +++ b/drivers/bus/mhi/host/trace.h
-@@ -103,7 +103,7 @@ TRACE_EVENT(mhi_gen_tre,
+@@ -104,7 +104,7 @@ TRACE_EVENT(mhi_gen_tre,
  	),
  
  	TP_fast_assign(
@@ -8,8 +8,8 @@
 +		__assign_str(name, mhi_cntrl->mhi_dev->name);
  		__entry->ch_num = mhi_chan->chan;
  		__entry->wp = mhi_tre;
- 		__entry->tre_ptr = mhi_tre->ptr;
-@@ -131,7 +131,7 @@ TRACE_EVENT(mhi_intvec_states,
+ 		__entry->tre_ptr = le64_to_cpu(mhi_tre->ptr);
+@@ -132,7 +132,7 @@ TRACE_EVENT(mhi_intvec_states,
  	),
  
  	TP_fast_assign(
@@ -18,7 +18,7 @@
  		__entry->local_ee = mhi_cntrl->ee;
  		__entry->state = mhi_cntrl->dev_state;
  		__entry->dev_ee = dev_ee;
-@@ -158,7 +158,7 @@ TRACE_EVENT(mhi_tryset_pm_state,
+@@ -159,7 +159,7 @@ TRACE_EVENT(mhi_tryset_pm_state,
  	),
  
  	TP_fast_assign(
@@ -27,16 +27,16 @@
  		if (pm_state)
  			pm_state = __fls(pm_state);
  		__entry->pm_state = pm_state;
-@@ -184,7 +184,7 @@ DECLARE_EVENT_CLASS(mhi_process_event_ri
+@@ -185,7 +185,7 @@ DECLARE_EVENT_CLASS(mhi_process_event_ri
  	),
  
  	TP_fast_assign(
 -		__assign_str(name);
 +		__assign_str(name, mhi_cntrl->mhi_dev->name);
  		__entry->rp = rp;
- 		__entry->ptr = rp->ptr;
- 		__entry->dword0 = rp->dword[0];
-@@ -226,7 +226,7 @@ DECLARE_EVENT_CLASS(mhi_update_channel_s
+ 		__entry->ptr = le64_to_cpu(rp->ptr);
+ 		__entry->dword0 = le32_to_cpu(rp->dword[0]);
+@@ -227,7 +227,7 @@ DECLARE_EVENT_CLASS(mhi_update_channel_s
  	),
  
  	TP_fast_assign(
@@ -45,7 +45,7 @@
  		__entry->ch_num = mhi_chan->chan;
  		__entry->state = state;
  		__entry->reason = reason;
-@@ -265,7 +265,7 @@ TRACE_EVENT(mhi_pm_st_transition,
+@@ -266,7 +266,7 @@ TRACE_EVENT(mhi_pm_st_transition,
  	),
  
  	TP_fast_assign(

package/kernel/mac80211/patches/build/210-wireless_netns_local_backport.patch

@@ -0,0 +1,44 @@
+--- a/net/wireless/core.c
++++ b/net/wireless/core.c
+@@ -165,11 +165,15 @@ int cfg80211_switch_netns(struct cfg8021
+ 	list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
+ 		if (!wdev->netdev)
+ 			continue;
++#if LINUX_VERSION_IS_GEQ(6,12,0)
+ 		wdev->netdev->netns_local = false;
++#endif
+ 		err = dev_change_net_namespace(wdev->netdev, net, "wlan%d");
+ 		if (err)
+ 			break;
++#if LINUX_VERSION_IS_GEQ(6,12,0)
+ 		wdev->netdev->netns_local = true;
++#endif
+ 	}
+ 
+ 	if (err) {
+@@ -181,11 +185,15 @@ int cfg80211_switch_netns(struct cfg8021
+ 						     list) {
+ 			if (!wdev->netdev)
+ 				continue;
++#if LINUX_VERSION_IS_GEQ(6,12,0)
+ 			wdev->netdev->netns_local = false;
++#endif
+ 			err = dev_change_net_namespace(wdev->netdev, net,
+ 							"wlan%d");
+ 			WARN_ON(err);
++#if LINUX_VERSION_IS_GEQ(6,12,0)
+ 			wdev->netdev->netns_local = true;
++#endif
+ 		}
+ 
+ 		return err;
+@@ -1518,7 +1526,9 @@ static int cfg80211_netdev_notifier_call
+ 		SET_NETDEV_DEVTYPE(dev, &wiphy_type);
+ 		wdev->netdev = dev;
+ 		/* can only change netns with wiphy */
++#if LINUX_VERSION_IS_GEQ(6,12,0)
+ 		dev->netns_local = true;
++#endif
+ 
+ 		cfg80211_init_wdev(wdev);
+ 		break;

package/kernel/mac80211/patches/build/236-fix-genlmsg_multicast_allns-build-error-on-kernel-6.6.59.patch

@@ -1,169 +0,0 @@
-From e0f83d268974dab0361d11904dfc9acec53f96a6 Mon Sep 17 00:00:00 2001
-From: Eric Dumazet <edumazet@google.com>
-Date: Fri, 11 Oct 2024 17:12:17 +0000
-Subject: [PATCH] genetlink: hold RCU in genlmsg_mcast()
-
-[ Upstream commit 56440d7ec28d60f8da3bfa09062b3368ff9b16db ]
-
-While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw
-one lockdep splat [1].
-
-genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU.
-
-Instead of letting all callers guard genlmsg_multicast_allns()
-with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast().
-
-This also means the @flags parameter is useless, we need to always use
-GFP_ATOMIC.
-
-[1]
-[10882.424136] =============================
-[10882.424166] WARNING: suspicious RCU usage
-[10882.424309] 6.12.0-rc2-virtme #1156 Not tainted
-[10882.424400] -----------------------------
-[10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!!
-[10882.424469]
-other info that might help us debug this:
-
-[10882.424500]
-rcu_scheduler_active = 2, debug_locks = 1
-[10882.424744] 2 locks held by ip/15677:
-[10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219)
-[10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209)
-[10882.426465]
-stack backtrace:
-[10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme #1156
-[10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
-[10882.427046] Call Trace:
-[10882.427131]  <TASK>
-[10882.427244] dump_stack_lvl (lib/dump_stack.c:123)
-[10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
-[10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7))
-[10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink
-[10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink
-[10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115)
-[10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210)
-[10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink
-[10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201)
-[10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551)
-[10882.428069] genl_rcv (net/netlink/genetlink.c:1220)
-[10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357)
-[10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901)
-[10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1))
-
-Fixes: 33f72e6f0c67 ("l2tp : multicast notification to the registered listeners")
-Signed-off-by: Eric Dumazet <edumazet@google.com>
-Cc: James Chapman <jchapman@katalix.com>
-Cc: Tom Parkin <tparkin@katalix.com>
-Cc: Johannes Berg <johannes.berg@intel.com>
-Link: https://patch.msgid.link/20241011171217.3166614-1-edumazet@google.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Sasha Levin <sashal@kernel.org>
----
- drivers/target/target_core_user.c |  2 +-
- include/net/genetlink.h           |  3 +--
- net/l2tp/l2tp_netlink.c           |  4 ++--
- net/netlink/genetlink.c           | 28 ++++++++++++++--------------
- net/wireless/nl80211.c            |  8 ++------
- 5 files changed, 20 insertions(+), 25 deletions(-)
-
---- a/backport-include/net/genetlink.h
-+++ b/backport-include/net/genetlink.h
-@@ -150,7 +150,7 @@ int genlmsg_multicast(const struct genl_
- #define genlmsg_multicast_allns LINUX_BACKPORT(genlmsg_multicast_allns)
- int backport_genlmsg_multicast_allns(const struct genl_family *family,
- 				     struct sk_buff *skb, u32 portid,
--				     unsigned int group, gfp_t flags);
-+				     unsigned int group);
- 
- #define genl_family_attrbuf LINUX_BACKPORT(genl_family_attrbuf)
- static inline struct nlattr **genl_family_attrbuf(struct genl_family *family)
---- a/compat/backport-genetlink.c
-+++ b/compat/backport-genetlink.c
-@@ -198,23 +198,23 @@ int genlmsg_multicast(const struct genl_
- }
- EXPORT_SYMBOL_GPL(genlmsg_multicast);
- 
--static int genlmsg_mcast(struct sk_buff *skb, u32 portid, unsigned long group,
--			 gfp_t flags)
-+static int genlmsg_mcast(struct sk_buff *skb, u32 portid, unsigned long group)
- {
- 	struct sk_buff *tmp;
- 	struct net *net, *prev = NULL;
- 	bool delivered = false;
- 	int err;
- 
-+	rcu_read_lock();
- 	for_each_net_rcu(net) {
- 		if (prev) {
--			tmp = skb_clone(skb, flags);
-+			tmp = skb_clone(skb, GFP_ATOMIC);
- 			if (!tmp) {
- 				err = -ENOMEM;
- 				goto error;
- 			}
- 			err = nlmsg_multicast(prev->genl_sock, tmp,
--					      portid, group, flags);
-+					      portid, group, GFP_ATOMIC);
- 			if (!err)
- 				delivered = true;
- 			else if (err != -ESRCH)
-@@ -223,25 +223,29 @@ static int genlmsg_mcast(struct sk_buff
- 
- 		prev = net;
- 	}
-+	err = nlmsg_multicast(prev->genl_sock, skb, portid, group, GFP_ATOMIC);
-+
-+	rcu_read_unlock();
- 
--	err = nlmsg_multicast(prev->genl_sock, skb, portid, group, flags);
- 	if (!err)
- 		delivered = true;
- 	else if (err != -ESRCH)
- 		return err;
- 	return delivered ? 0 : -ESRCH;
-  error:
-+	rcu_read_unlock();
-+
- 	kfree_skb(skb);
- 	return err;
- }
- 
- int backport_genlmsg_multicast_allns(const struct genl_family *family,
- 				     struct sk_buff *skb, u32 portid,
--				     unsigned int group, gfp_t flags)
-+				     unsigned int group)
- {
- 	group = __backport_genl_group(family, group);
- 	if (group == INVALID_GROUP)
- 		return -EINVAL;
--	return genlmsg_mcast(skb, portid, group, flags);
-+	return genlmsg_mcast(skb, portid, group);
- }
- EXPORT_SYMBOL_GPL(backport_genlmsg_multicast_allns);
---- a/net/wireless/nl80211.c
-+++ b/net/wireless/nl80211.c
-@@ -17956,10 +17956,8 @@ void nl80211_common_reg_change_event(enu
- 
- 	genlmsg_end(msg, hdr);
- 
--	rcu_read_lock();
- 	genlmsg_multicast_allns(&nl80211_fam, msg, 0,
--				NL80211_MCGRP_REGULATORY, GFP_ATOMIC);
--	rcu_read_unlock();
-+				NL80211_MCGRP_REGULATORY);
- 
- 	return;
- 
-@@ -18692,10 +18690,8 @@ void nl80211_send_beacon_hint_event(stru
- 
- 	genlmsg_end(msg, hdr);
- 
--	rcu_read_lock();
- 	genlmsg_multicast_allns(&nl80211_fam, msg, 0,
--				NL80211_MCGRP_REGULATORY, GFP_ATOMIC);
--	rcu_read_unlock();
-+				NL80211_MCGRP_REGULATORY);
- 
- 	return;
- 

package/kernel/mac80211/patches/mwl/700-mwl8k-missing-pci-id-for-WNR854T.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/marvell/mwl8k.c
 +++ b/drivers/net/wireless/marvell/mwl8k.c
-@@ -5709,6 +5709,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
+@@ -5712,6 +5712,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
  MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API));
  
  static const struct pci_device_id mwl8k_pci_id_table[] = {

package/kernel/mac80211/patches/mwl/900-mwifiex-increase-the-global-limit-up-to-4-SSID.patch

@@ -30,7 +30,7 @@ the card-specific structure.
  
  #define MWIFIEX_DMA_ALIGN_SZ	    64
  #define MWIFIEX_RX_HEADROOM	    64
-@@ -100,7 +100,7 @@
+@@ -123,7 +123,7 @@
  #define MWIFIEX_RATE_INDEX_OFDM0   4
  
  #define MWIFIEX_MAX_STA_NUM		3

package/kernel/mac80211/patches/mwl/940-mwl8k_init_devices_synchronously.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/marvell/mwl8k.c
 +++ b/drivers/net/wireless/marvell/mwl8k.c
-@@ -6295,6 +6295,8 @@ static int mwl8k_probe(struct pci_dev *p
+@@ -6298,6 +6298,8 @@ static int mwl8k_probe(struct pci_dev *p
  
  	priv->running_bsses = 0;
  
@@ -9,7 +9,7 @@
  	return rc;
  
  err_stop_firmware:
-@@ -6328,8 +6330,6 @@ static void mwl8k_remove(struct pci_dev
+@@ -6331,8 +6333,6 @@ static void mwl8k_remove(struct pci_dev
  		return;
  	priv = hw->priv;
  

package/kernel/mac80211/patches/mwl/950-mwifiex-Print-stringified-name-of-command-in-error-l.patch

@@ -116,7 +116,7 @@ Signed-off-by: Pali Rohár <pali@kernel.org>
  		mwifiex_recycle_cmd_node(adapter, cmd_node);
  		queue_work(adapter->workqueue, &adapter->main_work);
  		return -1;
-@@ -653,8 +732,8 @@ int mwifiex_send_cmd(struct mwifiex_priv
+@@ -655,8 +734,8 @@ int mwifiex_send_cmd(struct mwifiex_priv
  	/* Return error, since the command preparation failed */
  	if (ret) {
  		mwifiex_dbg(adapter, ERROR,
@@ -127,7 +127,7 @@ Signed-off-by: Pali Rohár <pali@kernel.org>
  		mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
  		return -1;
  	}
-@@ -902,8 +981,9 @@ int mwifiex_process_cmdresp(struct mwifi
+@@ -904,8 +983,9 @@ int mwifiex_process_cmdresp(struct mwifi
  	if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING) {
  		if (ret) {
  			mwifiex_dbg(adapter, ERROR,
@@ -139,7 +139,7 @@ Signed-off-by: Pali Rohár <pali@kernel.org>
  			mwifiex_init_fw_complete(adapter);
  			return -1;
  		} else if (adapter->last_init_cmd == cmdresp_no)
-@@ -1265,8 +1345,8 @@ mwifiex_process_sleep_confirm_resp(struc
+@@ -1287,8 +1367,8 @@ mwifiex_process_sleep_confirm_resp(struc
  
  	if (command != HostCmd_CMD_802_11_PS_MODE_ENH) {
  		mwifiex_dbg(adapter, ERROR,
@@ -152,7 +152,7 @@ Signed-off-by: Pali Rohár <pali@kernel.org>
  
 --- a/drivers/net/wireless/marvell/mwifiex/main.h
 +++ b/drivers/net/wireless/marvell/mwifiex/main.h
-@@ -1084,6 +1084,8 @@ void mwifiex_cancel_all_pending_cmd(stru
+@@ -1100,6 +1100,8 @@ void mwifiex_cancel_all_pending_cmd(stru
  void mwifiex_cancel_pending_scan_cmd(struct mwifiex_adapter *adapter);
  void mwifiex_cancel_scan(struct mwifiex_adapter *adapter);
  
@@ -177,7 +177,7 @@ Signed-off-by: Pali Rohár <pali@kernel.org>
  		adapter->cmd_wait_q.status = -1;
 --- a/drivers/net/wireless/marvell/mwifiex/uap_cmd.c
 +++ b/drivers/net/wireless/marvell/mwifiex/uap_cmd.c
-@@ -802,7 +802,8 @@ int mwifiex_uap_prepare_cmd(struct mwifi
+@@ -964,7 +964,8 @@ int mwifiex_uap_prepare_cmd(struct mwifi
  		break;
  	default:
  		mwifiex_dbg(priv->adapter, ERROR,

package/kernel/mac80211/patches/rt2x00/620-01-rt2x00-respect-rt2800-hardware-TX-queue-index.patch

@@ -0,0 +1,257 @@
+From 654653e718f6c55c6f29fd94cc8152a92c8166ac Mon Sep 17 00:00:00 2001
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Tue, 24 Dec 2024 08:36:32 +0800
+Subject: [PATCH 1/2] rt2x00: respect the rt2800 hardware TX queue index
+
+The Ralink TX queue register index is different from the Linux
+IEEE80211 queue id definition. Their conversion table is as follows:
+
+Queue   IEEE80211   Ralink
+AC_VO      0          3
+AC_VI      1          2
+AC_BE      2          0
+AC_BK      3          1
+
+The TX queues are still functioning properly under the current
+configuration. I don't have evidence, but I believe there should
+be some differences in the internal hardware implementation of
+different TX queues, e.g. interrupt priority. so it's better to
+respect the queue index defined by the Ralink when we construct
+the TX rings and descriptors.
+
+And the more important thing is that we are using the wrong queue
+index to calculate the register offset and mask in .conf_tx(),
+which resulted in writing incorrect AIFSN, CWMAX, CWMIN and TXOP
+values for all TX queues. This patch introduces a index conversion
+table to fix these parameters.
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800.h   | 24 ++++++------
+ .../net/wireless/ralink/rt2x00/rt2800lib.c    | 20 +++++++---
+ .../net/wireless/ralink/rt2x00/rt2800mmio.c   | 38 ++++++++++---------
+ .../net/wireless/ralink/rt2x00/rt2x00queue.h  | 20 ++++++++++
+ 4 files changed, 67 insertions(+), 35 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
+@@ -379,10 +379,10 @@
+ 
+ /*
+  * WMM_AIFSN_CFG: Aifsn for each EDCA AC
+- * AIFSN0: AC_VO
+- * AIFSN1: AC_VI
+- * AIFSN2: AC_BE
+- * AIFSN3: AC_BK
++ * AIFSN0: AC_BE
++ * AIFSN1: AC_BK
++ * AIFSN2: AC_VI
++ * AIFSN3: AC_VO
+  */
+ #define WMM_AIFSN_CFG			0x0214
+ #define WMM_AIFSN_CFG_AIFSN0		FIELD32(0x0000000f)
+@@ -392,10 +392,10 @@
+ 
+ /*
+  * WMM_CWMIN_CSR: CWmin for each EDCA AC
+- * CWMIN0: AC_VO
+- * CWMIN1: AC_VI
+- * CWMIN2: AC_BE
+- * CWMIN3: AC_BK
++ * CWMIN0: AC_BE
++ * CWMIN1: AC_BK
++ * CWMIN2: AC_VI
++ * CWMIN3: AC_VO
+  */
+ #define WMM_CWMIN_CFG			0x0218
+ #define WMM_CWMIN_CFG_CWMIN0		FIELD32(0x0000000f)
+@@ -405,10 +405,10 @@
+ 
+ /*
+  * WMM_CWMAX_CSR: CWmax for each EDCA AC
+- * CWMAX0: AC_VO
+- * CWMAX1: AC_VI
+- * CWMAX2: AC_BE
+- * CWMAX3: AC_BK
++ * CWMAX0: AC_BE
++ * CWMAX1: AC_BK
++ * CWMAX2: AC_VI
++ * CWMAX3: AC_VO
+  */
+ #define WMM_CWMAX_CFG			0x021c
+ #define WMM_CWMAX_CFG_CWMAX0		FIELD32(0x0000000f)
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -835,7 +835,8 @@ void rt2800_write_tx_data(struct queue_e
+ 			   txdesc->key_idx : txdesc->u.ht.wcid);
+ 	rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
+ 			   txdesc->length);
+-	rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE, entry->queue->qid);
++	rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE,
++			   rt2x00_ac_to_hwq(entry->queue->qid));
+ 	rt2x00_set_field32(&word, TXWI_W1_PACKETID_ENTRY, (entry->entry_idx % 3) + 1);
+ 	rt2x00_desc_write(txwi, 1, word);
+ 
+@@ -1125,6 +1126,12 @@ void rt2800_txdone(struct rt2x00_dev *rt
+ 	u32 reg;
+ 	u8 qid;
+ 	bool match;
++	static const u8 rt2ac[] = {
++		IEEE80211_AC_BE,
++		IEEE80211_AC_BK,
++		IEEE80211_AC_VI,
++		IEEE80211_AC_VO,
++	};
+ 
+ 	while (quota-- > 0 && kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
+ 		/*
+@@ -1132,6 +1139,8 @@ void rt2800_txdone(struct rt2x00_dev *rt
+ 		 * guaranteed to be one of the TX QIDs .
+ 		 */
+ 		qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
++		/* Convert Ralink hardware queue index to IEEE80211 queue id. */
++		qid = rt2ac[qid];
+ 		queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
+ 
+ 		if (unlikely(rt2x00queue_empty(queue))) {
+@@ -12188,8 +12197,9 @@ int rt2800_conf_tx(struct ieee80211_hw *
+ 	queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx);
+ 
+ 	/* Update WMM TXOP register */
+-	offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
+-	field.bit_offset = (queue_idx & 1) * 16;
++	offset = WMM_TXOP0_CFG +
++		 (sizeof(u32) * (!!(rt2x00_ac_to_hwq(queue_idx) & 2)));
++	field.bit_offset = (rt2x00_ac_to_hwq(queue_idx) & 1) * 16;
+ 	field.bit_mask = 0xffff << field.bit_offset;
+ 
+ 	reg = rt2800_register_read(rt2x00dev, offset);
+@@ -12197,7 +12207,7 @@ int rt2800_conf_tx(struct ieee80211_hw *
+ 	rt2800_register_write(rt2x00dev, offset, reg);
+ 
+ 	/* Update WMM registers */
+-	field.bit_offset = queue_idx * 4;
++	field.bit_offset = rt2x00_ac_to_hwq(queue_idx) * 4;
+ 	field.bit_mask = 0xf << field.bit_offset;
+ 
+ 	reg = rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG);
+@@ -12213,7 +12223,7 @@ int rt2800_conf_tx(struct ieee80211_hw *
+ 	rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
+ 
+ 	/* Update EDCA registers */
+-	offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
++	offset = EDCA_AC0_CFG + (sizeof(u32) * rt2x00_ac_to_hwq(queue_idx));
+ 
+ 	reg = rt2800_register_read(rt2x00dev, offset);
+ 	rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
+@@ -35,7 +35,7 @@ unsigned int rt2800mmio_get_dma_done(str
+ 	case QID_AC_VI:
+ 	case QID_AC_BE:
+ 	case QID_AC_BK:
+-		qid = queue->qid;
++		qid = rt2x00_ac_to_hwq(queue->qid);
+ 		idx = rt2x00mmio_register_read(rt2x00dev, TX_DTX_IDX(qid));
+ 		break;
+ 	case QID_MGMT:
+@@ -456,6 +456,7 @@ void rt2800mmio_kick_queue(struct data_q
+ {
+ 	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+ 	struct queue_entry *entry;
++	u8 qid;
+ 
+ 	switch (queue->qid) {
+ 	case QID_AC_VO:
+@@ -464,7 +465,8 @@ void rt2800mmio_kick_queue(struct data_q
+ 	case QID_AC_BK:
+ 		WARN_ON_ONCE(rt2x00queue_empty(queue));
+ 		entry = rt2x00queue_get_entry(queue, Q_INDEX);
+-		rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX(queue->qid),
++		qid = rt2x00_ac_to_hwq(queue->qid);
++		rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX(qid),
+ 					  entry->entry_idx);
+ 		hrtimer_start(&rt2x00dev->txstatus_timer,
+ 			      TXSTATUS_TIMEOUT, HRTIMER_MODE_REL);
+@@ -666,36 +668,36 @@ int rt2800mmio_init_queues(struct rt2x00
+ 	 * Initialize registers.
+ 	 */
+ 	entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
+-	rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR0,
++	rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR3,
+ 				  entry_priv->desc_dma);
+-	rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT0,
++	rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT3,
+ 				  rt2x00dev->tx[0].limit);
+-	rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX0, 0);
+-	rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX0, 0);
++	rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX3, 0);
++	rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX3, 0);
+ 
+ 	entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
+-	rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR1,
++	rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR2,
+ 				  entry_priv->desc_dma);
+-	rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT1,
++	rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT2,
+ 				  rt2x00dev->tx[1].limit);
+-	rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX1, 0);
+-	rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX1, 0);
++	rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX2, 0);
++	rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX2, 0);
+ 
+ 	entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
+-	rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR2,
++	rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR0,
+ 				  entry_priv->desc_dma);
+-	rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT2,
++	rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT0,
+ 				  rt2x00dev->tx[2].limit);
+-	rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX2, 0);
+-	rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX2, 0);
++	rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX0, 0);
++	rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX0, 0);
+ 
+ 	entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
+-	rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR3,
++	rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR1,
+ 				  entry_priv->desc_dma);
+-	rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT3,
++	rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT1,
+ 				  rt2x00dev->tx[3].limit);
+-	rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX3, 0);
+-	rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX3, 0);
++	rt2x00mmio_register_write(rt2x00dev, TX_CTX_IDX1, 0);
++	rt2x00mmio_register_write(rt2x00dev, TX_DTX_IDX1, 0);
+ 
+ 	rt2x00mmio_register_write(rt2x00dev, TX_BASE_PTR4, 0);
+ 	rt2x00mmio_register_write(rt2x00dev, TX_MAX_CNT4, 0);
+--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
++++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
+@@ -57,6 +57,26 @@ enum data_queue_qid {
+ };
+ 
+ /**
++ * rt2x00_ac_to_hwq - Convert IEEE80211 queue id to Ralink hardware
++ * queue register index.
++ * @ac: TX queue id.
++ */
++static inline u8 rt2x00_ac_to_hwq(enum data_queue_qid ac)
++{
++	static const u8 ralink_queue_map[] = {
++		[IEEE80211_AC_BE] = 0,
++		[IEEE80211_AC_BK] = 1,
++		[IEEE80211_AC_VI] = 2,
++		[IEEE80211_AC_VO] = 3,
++	};
++
++	if (unlikely(ac >= IEEE80211_NUM_ACS))
++		return ac;
++
++	return ralink_queue_map[ac];
++}
++
++/**
+  * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc
+  *
+  * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX

package/kernel/mac80211/patches/rt2x00/620-02-rt2x00-increase-the-watchdog-sampling-frequency.patch

@@ -0,0 +1,74 @@
+From aec50d1a30349759de0ac535f54c3441bf7ebef7 Mon Sep 17 00:00:00 2001
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Sun, 22 Dec 2024 17:06:59 +0800
+Subject: [PATCH 2/2] rt2x00: increase the watchdog sampling frequency
+
+Increase the sampling frequency of the watchdog when the hung
+counter reaches the threshold to avoid some unnecessary resets.
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c    | 45 +++++++++++++------
+ 1 file changed, 32 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -1320,26 +1320,45 @@ static bool rt2800_watchdog_hung(struct
+ 	return true;
+ }
+ 
++static inline bool check_dma_busy_rx(u32 reg_cfg, u32 reg_int)
++{
++	return (rt2x00_get_field32(reg_cfg, WPDMA_GLO_CFG_RX_DMA_BUSY) &&
++		rt2x00_get_field32(reg_int, INT_SOURCE_CSR_RX_COHERENT));
++}
++
++static inline bool check_dma_busy_tx(u32 reg_cfg, u32 reg_int)
++{
++	return (rt2x00_get_field32(reg_cfg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
++		rt2x00_get_field32(reg_int, INT_SOURCE_CSR_TX_COHERENT));
++}
++
+ static bool rt2800_watchdog_dma_busy(struct rt2x00_dev *rt2x00dev)
+ {
+ 	bool busy_rx, busy_tx;
+ 	u32 reg_cfg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG);
+ 	u32 reg_int = rt2800_register_read(rt2x00dev, INT_SOURCE_CSR);
+ 
+-	if (rt2x00_get_field32(reg_cfg, WPDMA_GLO_CFG_RX_DMA_BUSY) &&
+-	    rt2x00_get_field32(reg_int, INT_SOURCE_CSR_RX_COHERENT))
+-		rt2x00dev->rxdma_busy++;
+-	else
+-		rt2x00dev->rxdma_busy = 0;
+-
+-	if (rt2x00_get_field32(reg_cfg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
+-	    rt2x00_get_field32(reg_int, INT_SOURCE_CSR_TX_COHERENT))
+-		rt2x00dev->txdma_busy++;
+-	else
+-		rt2x00dev->txdma_busy = 0;
++	rt2x00dev->rxdma_busy = check_dma_busy_rx(reg_cfg, reg_int) ?
++				rt2x00dev->rxdma_busy + 1 : 0;
++	rt2x00dev->txdma_busy = check_dma_busy_tx(reg_cfg, reg_int) ?
++				rt2x00dev->txdma_busy + 1 : 0;
++
++	if (rt2x00dev->rxdma_busy > 25 || rt2x00dev->txdma_busy > 25) {
++		int cnt;
++		for (cnt = 0; cnt < 10; cnt++) {
++			msleep(5);
++			reg_cfg = rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG);
++			reg_int = rt2800_register_read(rt2x00dev, INT_SOURCE_CSR);
++
++			if (!check_dma_busy_rx(reg_cfg, reg_int))
++				rt2x00dev->rxdma_busy = 0;
++			if (!check_dma_busy_tx(reg_cfg, reg_int))
++				rt2x00dev->txdma_busy = 0;
++		}
++	}
+ 
+-	busy_rx = rt2x00dev->rxdma_busy > 30;
+-	busy_tx = rt2x00dev->txdma_busy > 30;
++	busy_rx = rt2x00dev->rxdma_busy > 40;
++	busy_tx = rt2x00dev->txdma_busy > 40;
+ 
+ 	if (!busy_rx && !busy_tx)
+ 		return false;

package/kernel/mac80211/patches/rt2x00/621-01-rt2x00-always-calibrate-MT7620-when-switching-channe.patch

@@ -0,0 +1,77 @@
+From 2c5aad0f9990724cce48e0a53b66bc0438e4603d Mon Sep 17 00:00:00 2001
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Sun, 22 Dec 2024 17:06:59 +0800
+Subject: [PATCH 1/4] rt2x00: always calibrate MT7620 when switching channel
+
+Perform calibration work after each channel switching operation.
+This should help improve the rx/tx signal strength for MT7620.
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c    | 24 ++++++++++++++-----
+ 1 file changed, 18 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -5704,6 +5704,9 @@ static void rt2800_config_ps(struct rt2x
+ 	}
+ }
+ 
++static void rt2800_calibration_rt6352_stage1(struct rt2x00_dev *rt2x00dev);
++static void rt2800_calibration_rt6352_stage2(struct rt2x00_dev *rt2x00dev);
++
+ void rt2800_config(struct rt2x00_dev *rt2x00dev,
+ 		   struct rt2x00lib_conf *libconf,
+ 		   const unsigned int flags)
+@@ -5718,10 +5721,18 @@ void rt2800_config(struct rt2x00_dev *rt
+ 		 */
+ 		rt2800_update_survey(rt2x00dev);
+ 
++		if (rt2x00_rt(rt2x00dev, RT6352) &&
++		    !test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
++			rt2800_calibration_rt6352_stage1(rt2x00dev);
++
+ 		rt2800_config_channel(rt2x00dev, libconf->conf,
+ 				      &libconf->rf, &libconf->channel);
+ 		rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan,
+ 				      libconf->conf->power_level);
++
++		if (rt2x00_rt(rt2x00dev, RT6352) &&
++		    !test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
++			rt2800_calibration_rt6352_stage2(rt2x00dev);
+ 	}
+ 	if (flags & IEEE80211_CONF_CHANGE_POWER)
+ 		rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan,
+@@ -10427,15 +10438,19 @@ static void rt2800_restore_rf_bbp_rt6352
+ 	}
+ }
+ 
+-static void rt2800_calibration_rt6352(struct rt2x00_dev *rt2x00dev)
++static void rt2800_calibration_rt6352_stage1(struct rt2x00_dev *rt2x00dev)
+ {
+-	u32 reg;
+-
+ 	if (rt2x00_has_cap_external_pa(rt2x00dev) ||
+ 	    rt2x00_has_cap_external_lna_bg(rt2x00dev))
+ 		rt2800_restore_rf_bbp_rt6352(rt2x00dev);
+ 
+ 	rt2800_r_calibration(rt2x00dev);
++}
++
++static void rt2800_calibration_rt6352_stage2(struct rt2x00_dev *rt2x00dev)
++{
++	u32 reg;
++
+ 	rt2800_rf_self_txdc_cal(rt2x00dev);
+ 	rt2800_rxdcoc_calibration(rt2x00dev);
+ 	rt2800_bw_filter_calibration(rt2x00dev, true);
+@@ -10766,9 +10781,6 @@ static void rt2800_init_rfcsr_6352(struc
+ 
+ 	rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
+ 	rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
+-
+-	/* Do calibration and init PA/LNA */
+-	rt2800_calibration_rt6352(rt2x00dev);
+ }
+ 
+ static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)

package/kernel/mac80211/patches/rt2x00/621-02-rt2x00-rework-link-tuner-for-MT7620.patch

@@ -0,0 +1,48 @@
+From aaa57924324c1ee77afa5e3effc95cc86158ddcc Mon Sep 17 00:00:00 2001
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Sun, 22 Dec 2024 17:06:59 +0800
+Subject: [PATCH 2/4] rt2x00: rework link tuner for MT7620
+
+Correct the VGC gain value for MT7620 and only do gain calibration
+for supported devices.
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 11 ++++++++---
+ 1 file changed, 8 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -5561,6 +5561,9 @@ static void rt2800_config_txpower(struct
+ 
+ void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
+ {
++	if (rt2x00_rt(rt2x00dev, RT6352))
++		return;
++
+ 	rt2800_config_txpower(rt2x00dev, rt2x00dev->hw->conf.chandef.chan,
+ 			      rt2x00dev->tx_power);
+ }
+@@ -5773,9 +5776,10 @@ static u8 rt2800_get_default_vgc(struct
+ 		    rt2x00_rt(rt2x00dev, RT3593) ||
+ 		    rt2x00_rt(rt2x00dev, RT5390) ||
+ 		    rt2x00_rt(rt2x00dev, RT5392) ||
+-		    rt2x00_rt(rt2x00dev, RT5592) ||
+-		    rt2x00_rt(rt2x00dev, RT6352))
++		    rt2x00_rt(rt2x00dev, RT5592))
+ 			vgc = 0x1c + (2 * rt2x00dev->lna_gain);
++		else if(rt2x00_rt(rt2x00dev, RT6352))
++			vgc = 0x04 + (2 * rt2x00dev->lna_gain);
+ 		else
+ 			vgc = 0x2e + rt2x00dev->lna_gain;
+ 	} else { /* 5GHZ band */
+@@ -5828,7 +5832,8 @@ void rt2800_link_tuner(struct rt2x00_dev
+ {
+ 	u8 vgc;
+ 
+-	if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C))
++	if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C) ||
++	    rt2x00_rt(rt2x00dev, RT6352))
+ 		return;
+ 
+ 	/* When RSSI is better than a certain threshold, increase VGC

package/kernel/mac80211/patches/rt2x00/621-03-rt2x00-correct-MT7620-SDM-mode-register-value.patch

@@ -0,0 +1,25 @@
+From b672507ca9f06bb17213036b16bc4f5c5bc65357 Mon Sep 17 00:00:00 2001
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Sun, 22 Dec 2024 17:06:59 +0800
+Subject: [PATCH 3/4] rt2x00: correct MT7620 SDM mode register value
+
+rt2x00_set_field8() is a mask writing function. If we want to set
+the BIT(7) for the SDM mode register here, we only need to fill "4"
+in the mask.
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3848,7 +3848,7 @@ static void rt2800_config_channel_rf7620
+ 
+ 	/* Default: XO=20MHz , SDM mode */
+ 	rfcsr = rt2800_rfcsr_read(rt2x00dev, 16);
+-	rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 0x80);
++	rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 4);
+ 	rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
+ 
+ 	rfcsr = rt2800_rfcsr_read(rt2x00dev, 21);

package/kernel/mac80211/patches/rt2x00/621-04-rt2x00-fix-register-operation-on-RXIQ-calibration.patch

@@ -0,0 +1,60 @@
+From 2585ada646e4dcf152ab813a24d667e6903105f4 Mon Sep 17 00:00:00 2001
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Sun, 22 Dec 2024 17:06:59 +0800
+Subject: [PATCH 4/4] rt2x00: fix register operation on RXIQ calibration
+
+In rt2800_rxiq_calibration(), some variables are overwritten
+before being used. Based on the values of the relevant registers
+in other functions, I believe the correct operation should be
+bit mask writing.
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 14 +++++++-------
+ 1 file changed, 7 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -8846,7 +8846,7 @@ static void rt2800_rxiq_calibration(stru
+ 		rt2x00_warn(rt2x00dev, "Timeout waiting for MAC status in RXIQ calibration\n");
+ 
+ 	bbpval = bbp4 & (~0x18);
+-	bbpval = bbp4 | 0x00;
++	bbpval = bbpval | 0x00;
+ 	rt2800_bbp_write(rt2x00dev, 4, bbpval);
+ 
+ 	bbpval = rt2800_bbp_read(rt2x00dev, 21);
+@@ -8928,13 +8928,13 @@ static void rt2800_rxiq_calibration(stru
+ 	for (ch_idx = 0; ch_idx < 2; ch_idx = ch_idx + 1) {
+ 		if (ch_idx == 0) {
+ 			rfval = rfb0r1 & (~0x3);
+-			rfval = rfb0r1 | 0x1;
++			rfval = rfval | 0x1;
+ 			rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfval);
+ 			rfval = rfb0r2 & (~0x33);
+-			rfval = rfb0r2 | 0x11;
++			rfval = rfval | 0x11;
+ 			rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfval);
+ 			rfval = rfb0r42 & (~0x50);
+-			rfval = rfb0r42 | 0x10;
++			rfval = rfval | 0x10;
+ 			rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfval);
+ 
+ 			rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00001006);
+@@ -8947,13 +8947,13 @@ static void rt2800_rxiq_calibration(stru
+ 			rt2800_bbp_dcoc_write(rt2x00dev, 1, 0x00);
+ 		} else {
+ 			rfval = rfb0r1 & (~0x3);
+-			rfval = rfb0r1 | 0x2;
++			rfval = rfval | 0x2;
+ 			rt2800_rfcsr_write_bank(rt2x00dev, 0, 1, rfval);
+ 			rfval = rfb0r2 & (~0x33);
+-			rfval = rfb0r2 | 0x22;
++			rfval = rfval | 0x22;
+ 			rt2800_rfcsr_write_bank(rt2x00dev, 0, 2, rfval);
+ 			rfval = rfb0r42 & (~0x50);
+-			rfval = rfb0r42 | 0x40;
++			rfval = rfval | 0x40;
+ 			rt2800_rfcsr_write_bank(rt2x00dev, 0, 42, rfval);
+ 
+ 			rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x00002006);

package/kernel/mac80211/patches/rt2x00/622-01-rt2x00-fix-RFCSR-register-init-values-for-RT5592.patch

@@ -0,0 +1,230 @@
+From b48887d5de9921d0ff9e88068e3cd555a383d702 Mon Sep 17 00:00:00 2001
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Sun, 22 Dec 2024 17:06:59 +0800
+Subject: [PATCH 1/2] rt2x00: fix RFCSR register init values for RT5592
+
+Based on Raink proprietary driver 2.7.1.5, correct the initial
+values of some RFCSR registers for RT5592.
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c    | 122 ++++++++----------
+ 1 file changed, 53 insertions(+), 69 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3576,9 +3576,8 @@ static void rt2800_config_channel_rf55xx
+ 
+ 		/* TODO RF27 <- tssi */
+ 
+-		rfcsr = rf->channel <= 10 ? 0x07 : 0x06;
+-		rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
+-		rt2800_rfcsr_write(rt2x00dev, 59, rfcsr);
++		rt2800_rfcsr_write(rt2x00dev, 23, rf->channel <= 10 ? 0x08 : 0x07);
++		rt2800_rfcsr_write(rt2x00dev, 59, rf->channel <= 4 ? 0x06 : 0x04);
+ 
+ 		if (is_11b) {
+ 			/* CCK */
+@@ -3599,7 +3598,7 @@ static void rt2800_config_channel_rf55xx
+ 		power_bound = POWER_BOUND;
+ 		ep_reg = 0x2;
+ 	} else {
+-		rt2800_rfcsr_write(rt2x00dev, 10, 0x97);
++		rt2800_rfcsr_write(rt2x00dev, 10, 0x95);
+ 		/* FIMXE: RF11 overwrite */
+ 		rt2800_rfcsr_write(rt2x00dev, 11, 0x40);
+ 		rt2800_rfcsr_write(rt2x00dev, 25, 0xBF);
+@@ -3608,13 +3607,15 @@ static void rt2800_config_channel_rf55xx
+ 		rt2800_rfcsr_write(rt2x00dev, 37, 0x04);
+ 		rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
+ 		rt2800_rfcsr_write(rt2x00dev, 40, 0x42);
+-		rt2800_rfcsr_write(rt2x00dev, 41, 0xBB);
++		rt2800_rfcsr_write(rt2x00dev, 41, 0xAB);
+ 		rt2800_rfcsr_write(rt2x00dev, 42, 0xD7);
+-		rt2800_rfcsr_write(rt2x00dev, 45, 0x41);
++		rt2800_rfcsr_write(rt2x00dev, 45, 0x01);
+ 		rt2800_rfcsr_write(rt2x00dev, 48, 0x00);
+ 		rt2800_rfcsr_write(rt2x00dev, 57, 0x77);
++		rt2800_rfcsr_write(rt2x00dev, 58, 0x19);
+ 		rt2800_rfcsr_write(rt2x00dev, 60, 0x05);
+ 		rt2800_rfcsr_write(rt2x00dev, 61, 0x01);
++		rt2800_rfcsr_write(rt2x00dev, 62, 0x19);
+ 
+ 		/* TODO RF27 <- tssi */
+ 
+@@ -3623,82 +3624,59 @@ static void rt2800_config_channel_rf55xx
+ 			rt2800_rfcsr_write(rt2x00dev, 12, 0x2E);
+ 			rt2800_rfcsr_write(rt2x00dev, 13, 0x22);
+ 			rt2800_rfcsr_write(rt2x00dev, 22, 0x60);
+-			rt2800_rfcsr_write(rt2x00dev, 23, 0x7F);
+-			if (rf->channel <= 50)
+-				rt2800_rfcsr_write(rt2x00dev, 24, 0x09);
+-			else if (rf->channel >= 52)
+-				rt2800_rfcsr_write(rt2x00dev, 24, 0x07);
++			rt2800_rfcsr_write(rt2x00dev, 23, 0x7E);
++			rt2800_rfcsr_write(rt2x00dev, 24, 0x07);
+ 			rt2800_rfcsr_write(rt2x00dev, 39, 0x1C);
+ 			rt2800_rfcsr_write(rt2x00dev, 43, 0x5B);
+-			rt2800_rfcsr_write(rt2x00dev, 44, 0X40);
+ 			rt2800_rfcsr_write(rt2x00dev, 46, 0X00);
+-			rt2800_rfcsr_write(rt2x00dev, 51, 0xFE);
+-			rt2800_rfcsr_write(rt2x00dev, 52, 0x0C);
+-			rt2800_rfcsr_write(rt2x00dev, 54, 0xF8);
++			rt2800_rfcsr_write(rt2x00dev, 51, 0xFD);
++			rt2800_rfcsr_write(rt2x00dev, 52, 0x0E);
++			rt2800_rfcsr_write(rt2x00dev, 55, 0x04);
++			rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
++			rt2800_rfcsr_write(rt2x00dev, 59, 0x7C);
++
+ 			if (rf->channel <= 50) {
+-				rt2800_rfcsr_write(rt2x00dev, 55, 0x06),
+-				rt2800_rfcsr_write(rt2x00dev, 56, 0xD3);
++				rt2800_rfcsr_write(rt2x00dev, 44, 0X32);
++				rt2800_rfcsr_write(rt2x00dev, 54, 0xF9);
+ 			} else if (rf->channel >= 52) {
+-				rt2800_rfcsr_write(rt2x00dev, 55, 0x04);
+-				rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
++				rt2800_rfcsr_write(rt2x00dev, 44, 0X2A);
++				rt2800_rfcsr_write(rt2x00dev, 54, 0xF8);
+ 			}
+-
+-			rt2800_rfcsr_write(rt2x00dev, 58, 0x15);
+-			rt2800_rfcsr_write(rt2x00dev, 59, 0x7F);
+-			rt2800_rfcsr_write(rt2x00dev, 62, 0x15);
+-
+ 		} else if (rf->channel >= 100 && rf->channel <= 165) {
+-
+ 			rt2800_rfcsr_write(rt2x00dev, 12, 0x0E);
+ 			rt2800_rfcsr_write(rt2x00dev, 13, 0x42);
+ 			rt2800_rfcsr_write(rt2x00dev, 22, 0x40);
+-			if (rf->channel <= 153) {
+-				rt2800_rfcsr_write(rt2x00dev, 23, 0x3C);
+-				rt2800_rfcsr_write(rt2x00dev, 24, 0x06);
+-			} else if (rf->channel >= 155) {
+-				rt2800_rfcsr_write(rt2x00dev, 23, 0x38);
+-				rt2800_rfcsr_write(rt2x00dev, 24, 0x05);
+-			}
++			rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
++			rt2800_rfcsr_write(rt2x00dev, 55, 0x01);
++
+ 			if (rf->channel <= 138) {
++				rt2800_rfcsr_write(rt2x00dev, 23, 0x7C);
+ 				rt2800_rfcsr_write(rt2x00dev, 39, 0x1A);
+ 				rt2800_rfcsr_write(rt2x00dev, 43, 0x3B);
+-				rt2800_rfcsr_write(rt2x00dev, 44, 0x20);
+ 				rt2800_rfcsr_write(rt2x00dev, 46, 0x18);
+-			} else if (rf->channel >= 140) {
++			} else {
++				rt2800_rfcsr_write(rt2x00dev, 23, 0x78);
+ 				rt2800_rfcsr_write(rt2x00dev, 39, 0x18);
+ 				rt2800_rfcsr_write(rt2x00dev, 43, 0x1B);
+-				rt2800_rfcsr_write(rt2x00dev, 44, 0x10);
+ 				rt2800_rfcsr_write(rt2x00dev, 46, 0X08);
+ 			}
+-			if (rf->channel <= 124)
+-				rt2800_rfcsr_write(rt2x00dev, 51, 0xFC);
+-			else if (rf->channel >= 126)
+-				rt2800_rfcsr_write(rt2x00dev, 51, 0xEC);
+-			if (rf->channel <= 138)
+-				rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
+-			else if (rf->channel >= 140)
+-				rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
+-			rt2800_rfcsr_write(rt2x00dev, 54, 0xEB);
+-			if (rf->channel <= 138)
+-				rt2800_rfcsr_write(rt2x00dev, 55, 0x01);
+-			else if (rf->channel >= 140)
+-				rt2800_rfcsr_write(rt2x00dev, 55, 0x00);
+-			if (rf->channel <= 128)
+-				rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
+-			else if (rf->channel >= 130)
+-				rt2800_rfcsr_write(rt2x00dev, 56, 0xAB);
+-			if (rf->channel <= 116)
+-				rt2800_rfcsr_write(rt2x00dev, 58, 0x1D);
+-			else if (rf->channel >= 118)
+-				rt2800_rfcsr_write(rt2x00dev, 58, 0x15);
+-			if (rf->channel <= 138)
+-				rt2800_rfcsr_write(rt2x00dev, 59, 0x3F);
+-			else if (rf->channel >= 140)
+-				rt2800_rfcsr_write(rt2x00dev, 59, 0x7C);
+-			if (rf->channel <= 116)
+-				rt2800_rfcsr_write(rt2x00dev, 62, 0x1D);
+-			else if (rf->channel >= 118)
+-				rt2800_rfcsr_write(rt2x00dev, 62, 0x15);
++
++			if (rf->channel <= 114) {
++				rt2800_rfcsr_write(rt2x00dev, 24, 0x02);
++				rt2800_rfcsr_write(rt2x00dev, 44, 0x1A);
++				rt2800_rfcsr_write(rt2x00dev, 54, 0xEA);
++				rt2800_rfcsr_write(rt2x00dev, 56, 0xB3);
++			} else {
++				rt2800_rfcsr_write(rt2x00dev, 24, 0x03);
++				rt2800_rfcsr_write(rt2x00dev, 44, 0x0A);
++				rt2800_rfcsr_write(rt2x00dev, 54, 0xF9);
++				rt2800_rfcsr_write(rt2x00dev, 56, 0x9B);
++			}
++
++			rt2800_rfcsr_write(rt2x00dev, 51, rf->channel <= 124 ? 0xFC : 0xEC);
++			rt2800_rfcsr_write(rt2x00dev, 58, rf->channel <= 116 ? 0x1D : 0x15);
++			rfcsr = (rf->channel >= 116 && rf->channel <= 138) ? 0x7E : 0x7C;
++			rt2800_rfcsr_write(rt2x00dev, 59, rfcsr);
+ 		}
+ 
+ 		power_bound = POWER_BOUND_5G;
+@@ -3710,7 +3688,7 @@ static void rt2800_config_channel_rf55xx
+ 		rt2x00_set_field8(&rfcsr, RFCSR49_TX, power_bound);
+ 	else
+ 		rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
+-	if (is_type_ep)
++	if (!is_type_ep)
+ 		rt2x00_set_field8(&rfcsr, RFCSR49_EP, ep_reg);
+ 	rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
+ 
+@@ -3719,7 +3697,7 @@ static void rt2800_config_channel_rf55xx
+ 		rt2x00_set_field8(&rfcsr, RFCSR50_TX, power_bound);
+ 	else
+ 		rt2x00_set_field8(&rfcsr, RFCSR50_TX, info->default_power2);
+-	if (is_type_ep)
++	if (!is_type_ep)
+ 		rt2x00_set_field8(&rfcsr, RFCSR50_EP, ep_reg);
+ 	rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
+ 
+@@ -3740,7 +3718,6 @@ static void rt2800_config_channel_rf55xx
+ 	rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
+ 
+ 	rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
+-	rt2800_rfcsr_write(rt2x00dev, 6, 0xe4);
+ 
+ 	if (conf_is_ht40(conf))
+ 		rt2800_rfcsr_write(rt2x00dev, 30, 0x16);
+@@ -8505,12 +8482,15 @@ static void rt2800_init_rfcsr_5392(struc
+ 
+ static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
+ {
++	u16 eeprom;
++
+ 	rt2800_rf_init_calibration(rt2x00dev, 30);
+ 
+ 	rt2800_rfcsr_write(rt2x00dev, 1, 0x3F);
++	rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
+ 	rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
+ 	rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
+-	rt2800_rfcsr_write(rt2x00dev, 6, 0xE4);
++	rt2800_rfcsr_write(rt2x00dev, 6, 0xE0);
+ 	rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
+ 	rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
+ 	rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
+@@ -8526,9 +8506,13 @@ static void rt2800_init_rfcsr_5592(struc
+ 	rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
+ 	rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
+ 	rt2800_rfcsr_write(rt2x00dev, 47, 0x0C);
+-	rt2800_rfcsr_write(rt2x00dev, 53, 0x22);
++	rt2800_rfcsr_write(rt2x00dev, 53, 0x44);
+ 	rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
+ 
++	eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2);
++	if (!rt2x00_get_field16(eeprom, EEPROM_NIC_CONF2_CRYSTAL))
++		rt2800_rfcsr_write(rt2x00dev, 6, 0xE4);
++
+ 	rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
+ 	msleep(1);
+ 

package/kernel/mac80211/patches/rt2x00/622-02-rt2x00-fix-BBP-register-init-values-for-RT5592.patch

@@ -0,0 +1,119 @@
+From 1847d817df5585f9d957d16ed2a56ceb41cf6df7 Mon Sep 17 00:00:00 2001
+From: Shiji Yang <yangshiji66@outlook.com>
+Date: Sun, 22 Dec 2024 17:06:59 +0800
+Subject: [PATCH 2/2] rt2x00: fix BBP register init values for RT5592
+
+Based on Raink proprietary driver 2.7.1.5, correct the initial
+values of some BBP registers for RT5592.
+
+Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
+---
+ .../net/wireless/ralink/rt2x00/rt2800lib.c    | 32 +++++++++----------
+ 1 file changed, 15 insertions(+), 17 deletions(-)
+
+--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+@@ -3746,6 +3746,7 @@ static void rt2800_config_channel_rf55xx
+ 	rt2800_bbp_write(rt2x00dev, 80, (rf->channel <= 14) ? 0x0E : 0x08);
+ 	rt2800_bbp_write(rt2x00dev, 81, (rf->channel <= 14) ? 0x3A : 0x38);
+ 	rt2800_bbp_write(rt2x00dev, 82, (rf->channel <= 14) ? 0x62 : 0x92);
++	rt2800_bbp_write(rt2x00dev, 95, (rf->channel <= 14) ? 0x9A : 0x1A);
+ 
+ 	/* GLRT band configuration */
+ 	rt2800_bbp_write(rt2x00dev, 195, 128);
+@@ -3758,7 +3759,7 @@ static void rt2800_config_channel_rf55xx
+ 	rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x32 : 0x20);
+ 	rt2800_bbp_write(rt2x00dev, 195, 133);
+ 	rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x28 : 0x7F);
+-	rt2800_bbp_write(rt2x00dev, 195, 124);
++	rt2800_bbp_write(rt2x00dev, 195, 134);
+ 	rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
+ }
+ 
+@@ -4304,7 +4305,8 @@ static void rt2800_config_channel(struct
+ 		rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+ 		rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+ 		rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+-		if (rt2x00_rt(rt2x00dev, RT6352))
++		if (rt2x00_rt(rt2x00dev, RT5592) ||
++		    rt2x00_rt(rt2x00dev, RT6352))
+ 			rt2800_bbp_write(rt2x00dev, 86, 0x38);
+ 		else
+ 			rt2800_bbp_write(rt2x00dev, 86, 0);
+@@ -4313,6 +4315,7 @@ static void rt2800_config_channel(struct
+ 	if (rf->channel <= 14) {
+ 		if (!rt2x00_rt(rt2x00dev, RT5390) &&
+ 		    !rt2x00_rt(rt2x00dev, RT5392) &&
++		    !rt2x00_rt(rt2x00dev, RT5592) &&
+ 		    !rt2x00_rt(rt2x00dev, RT6352)) {
+ 			if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
+ 				rt2800_bbp_write(rt2x00dev, 82, 0x62);
+@@ -4336,17 +4339,20 @@ static void rt2800_config_channel(struct
+ 		else if (rt2x00_rt(rt2x00dev, RT3593) ||
+ 			 rt2x00_rt(rt2x00dev, RT3883))
+ 			rt2800_bbp_write(rt2x00dev, 82, 0x82);
+-		else if (!rt2x00_rt(rt2x00dev, RT6352))
++		else if (!rt2x00_rt(rt2x00dev, RT5592) &&
++			 !rt2x00_rt(rt2x00dev, RT6352))
+ 			rt2800_bbp_write(rt2x00dev, 82, 0xf2);
+ 
+ 		if (rt2x00_rt(rt2x00dev, RT3593) ||
+ 		    rt2x00_rt(rt2x00dev, RT3883))
+ 			rt2800_bbp_write(rt2x00dev, 83, 0x9a);
+ 
+-		if (rt2x00_has_cap_external_lna_a(rt2x00dev))
+-			rt2800_bbp_write(rt2x00dev, 75, 0x46);
+-		else
+-			rt2800_bbp_write(rt2x00dev, 75, 0x50);
++		if (!rt2x00_rt(rt2x00dev, RT5592)) {
++			if (rt2x00_has_cap_external_lna_a(rt2x00dev))
++				rt2800_bbp_write(rt2x00dev, 75, 0x46);
++			else
++				rt2800_bbp_write(rt2x00dev, 75, 0x50);
++		}
+ 	}
+ 
+ 	reg = rt2800_register_read(rt2x00dev, TX_BAND_CFG);
+@@ -5783,12 +5789,10 @@ static inline void rt2800_set_vgc(struct
+ 		if (rt2x00_rt(rt2x00dev, RT3572) ||
+ 		    rt2x00_rt(rt2x00dev, RT3593) ||
+ 		    rt2x00_rt(rt2x00dev, RT3883) ||
++		    rt2x00_rt(rt2x00dev, RT5592) ||
+ 		    rt2x00_rt(rt2x00dev, RT6352)) {
+ 			rt2800_bbp_write_with_rx_chain(rt2x00dev, 66,
+ 						       vgc_level);
+-		} else if (rt2x00_rt(rt2x00dev, RT5592)) {
+-			rt2800_bbp_write(rt2x00dev, 83, qual->rssi > -65 ? 0x4a : 0x7a);
+-			rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level);
+ 		} else {
+ 			rt2800_bbp_write(rt2x00dev, 66, vgc_level);
+ 		}
+@@ -7016,7 +7020,6 @@ static void rt2800_init_bbp_5592(struct
+ 	rt2800_bbp_write(rt2x00dev, 88, 0x90);
+ 	rt2800_bbp_write(rt2x00dev, 91, 0x04);
+ 	rt2800_bbp_write(rt2x00dev, 92, 0x02);
+-	rt2800_bbp_write(rt2x00dev, 95, 0x9a);
+ 	rt2800_bbp_write(rt2x00dev, 98, 0x12);
+ 	rt2800_bbp_write(rt2x00dev, 103, 0xC0);
+ 	rt2800_bbp_write(rt2x00dev, 104, 0x92);
+@@ -7027,6 +7030,7 @@ static void rt2800_init_bbp_5592(struct
+ 	rt2800_bbp_write(rt2x00dev, 134, 0xD0);
+ 	rt2800_bbp_write(rt2x00dev, 135, 0xF6);
+ 	rt2800_bbp_write(rt2x00dev, 137, 0x0F);
++	rt2800_bbp_write(rt2x00dev, 148, 0x84);
+ 
+ 	/* Initialize GLRT (Generalized Likehood Radio Test) */
+ 	rt2800_init_bbp_5592_glrt(rt2x00dev);
+@@ -7051,12 +7055,6 @@ static void rt2800_init_bbp_5592(struct
+ 		rt2x00_set_field8(&value, BBP254_BIT7, 1);
+ 		rt2800_bbp_write(rt2x00dev, 254, value);
+ 	}
+-
+-	rt2800_init_freq_calibration(rt2x00dev);
+-
+-	rt2800_bbp_write(rt2x00dev, 84, 0x19);
+-	if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
+-		rt2800_bbp_write(rt2x00dev, 103, 0xc0);
+ }
+ 
+ static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev)

package/kernel/mac80211/patches/rt2x00/994-rt2x00-import-support-for-external-LNA-on-MT7620.patch

@@ -52,9 +52,9 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  static const unsigned int rt2800_eeprom_map[EEPROM_WORD_COUNT] = {
  	[EEPROM_CHIP_ID]		= 0x0000,
  	[EEPROM_VERSION]		= 0x0001,
-@@ -10404,8 +10422,10 @@ static void rt2800_calibration_rt6352(st
- 	u32 reg;
- 
+@@ -10428,8 +10446,10 @@ static void rt2800_restore_rf_bbp_rt6352
+ static void rt2800_calibration_rt6352_stage1(struct rt2x00_dev *rt2x00dev)
+ {
  	if (rt2x00_has_cap_external_pa(rt2x00dev) ||
 -	    rt2x00_has_cap_external_lna_bg(rt2x00dev))
 +	    rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
@@ -63,8 +63,8 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 +	}
  
  	rt2800_r_calibration(rt2x00dev);
- 	rt2800_rf_self_txdc_cal(rt2x00dev);
-@@ -10423,6 +10443,8 @@ static void rt2800_calibration_rt6352(st
+ }
+@@ -10453,6 +10473,8 @@ static void rt2800_calibration_rt6352_st
  	    !rt2x00_has_cap_external_lna_bg(rt2x00dev))
  		return;
  

package/kernel/mac80211/patches/rt2x00/996-rt2x00-mt7620-differentiate-based-on-SoC-CHIP_VER.patch

@@ -14,13 +14,13 @@
   */
 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
 +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
-@@ -3836,14 +3836,16 @@ static void rt2800_config_channel_rf7620
+@@ -3842,14 +3842,16 @@ static void rt2800_config_channel_rf7620
  	rt2x00_set_field8(&rfcsr, RFCSR19_K, rf->rf4);
  	rt2800_rfcsr_write(rt2x00dev, 19, rfcsr);
  
 -	/* Default: XO=20MHz , SDM mode */
 -	rfcsr = rt2800_rfcsr_read(rt2x00dev, 16);
--	rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 0x80);
+-	rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 4);
 -	rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
 -
 -	rfcsr = rt2800_rfcsr_read(rt2x00dev, 21);
@@ -29,7 +29,7 @@
 +	if (rt2800_hw_get_chipver(rt2x00dev) > 1) {
 +		/* Default: XO=20MHz , SDM mode */
 +		rfcsr = rt2800_rfcsr_read(rt2x00dev, 16);
-+		rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 0x80);
++		rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 4);
 +		rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
 +
 +		rfcsr = rt2800_rfcsr_read(rt2x00dev, 21);
@@ -39,7 +39,7 @@
  
  	rfcsr = rt2800_rfcsr_read(rt2x00dev, 1);
  	rt2x00_set_field8(&rfcsr, RFCSR1_TX2_EN_MT7620,
-@@ -3877,18 +3879,23 @@ static void rt2800_config_channel_rf7620
+@@ -3883,18 +3885,23 @@ static void rt2800_config_channel_rf7620
  		rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x20);
  	}
  
@@ -73,7 +73,7 @@
  
  	if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) {
  		if (conf_is_ht40(conf)) {
-@@ -4002,25 +4009,29 @@ static void rt2800_config_alc_rt6352(str
+@@ -4008,25 +4015,29 @@ static void rt2800_config_alc_rt6352(str
  	if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY)))
  		rt2x00_warn(rt2x00dev, "RF busy while configuring ALC\n");
  
@@ -121,7 +121,7 @@
  	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl);
  
  	rt2800_vco_calibration(rt2x00dev);
-@@ -4513,7 +4524,8 @@ static void rt2800_config_channel(struct
+@@ -4524,7 +4535,8 @@ static void rt2800_config_channel(struct
  	if (rt2x00_rt(rt2x00dev, RT6352)) {
  		/* BBP for GLRT BW */
  		bbp = conf_is_ht40(conf) ?
@@ -131,7 +131,7 @@
  		      0x15 : 0x1a;
  		rt2800_bbp_glrt_write(rt2x00dev, 141, bbp);
  
-@@ -6017,18 +6029,33 @@ static int rt2800_init_registers(struct
+@@ -6042,18 +6054,34 @@ static int rt2800_init_registers(struct
  	} else if (rt2x00_rt(rt2x00dev, RT5350)) {
  		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
  	} else if (rt2x00_rt(rt2x00dev, RT6352)) {
@@ -162,7 +162,8 @@
 +			rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
 +			rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0001);
 +			rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
-+			rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000);
++			rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150f0f);
++			rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x06060606);
 +			rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0);
 +			rt2800_register_write(rt2x00dev, TX1_BB_GAIN_ATTEN, 0x0);
 +			rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN,
@@ -177,7 +178,7 @@
  		reg = rt2800_register_read(rt2x00dev, TX_ALC_CFG_1);
  		rt2x00_set_field32(&reg, TX_ALC_CFG_1_ROS_BUSY_EN, 0);
  		rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg);
-@@ -7141,14 +7168,16 @@ static void rt2800_init_bbp_6352(struct
+@@ -7160,14 +7188,16 @@ static void rt2800_init_bbp_6352(struct
  	rt2800_bbp_write(rt2x00dev, 188, 0x00);
  	rt2800_bbp_write(rt2x00dev, 189, 0x00);
  
@@ -202,7 +203,7 @@
  
  	/* BBP for G band GLRT function (BBP_128 ~ BBP_221) */
  	rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00);
-@@ -10378,6 +10407,9 @@ static void rt2800_restore_rf_bbp_rt6352
+@@ -10404,6 +10434,9 @@ static void rt2800_restore_rf_bbp_rt6352
  		rt2800_register_write(rt2x00dev, RF_BYPASS3, 0x0);
  	}
  
@@ -212,7 +213,7 @@
  	if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
  		rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x16);
  		rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x23);
-@@ -10455,6 +10487,9 @@ static void rt2800_calibration_rt6352(st
+@@ -10485,6 +10518,9 @@ static void rt2800_calibration_rt6352_st
  		rt2800_register_write(rt2x00dev, RF_BYPASS3, reg);
  	}
  
@@ -222,7 +223,7 @@
  	if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) {
  		rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x66);
  		rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x20);
-@@ -10545,31 +10580,36 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -10575,31 +10611,36 @@ static void rt2800_init_rfcsr_6352(struc
  	rt2800_rfcsr_write(rt2x00dev, 42, 0x5B);
  	rt2800_rfcsr_write(rt2x00dev, 43, 0x00);
  
@@ -284,7 +285,7 @@
  
  	/* Initialize RF channel register to default value */
  	rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03);
-@@ -10635,63 +10675,71 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -10665,63 +10706,71 @@ static void rt2800_init_rfcsr_6352(struc
  
  	rt2800_rfcsr_write_bank(rt2x00dev, 6, 45, 0xC5);
  
@@ -411,7 +412,7 @@
  
  	/* Initialize RF DC calibration register to default value */
  	rt2800_rfcsr_write_dccal(rt2x00dev, 0, 0x47);
-@@ -10754,12 +10802,17 @@ static void rt2800_init_rfcsr_6352(struc
+@@ -10784,12 +10833,17 @@ static void rt2800_init_rfcsr_6352(struc
  	rt2800_rfcsr_write_dccal(rt2x00dev, 62, 0x00);
  	rt2800_rfcsr_write_dccal(rt2x00dev, 63, 0x00);
  
@@ -431,6 +432,6 @@
 +		rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
 +		rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
 +	}
+ }
  
- 	/* Do calibration and init PA/LNA */
- 	rt2800_calibration_rt6352(rt2x00dev);
+ static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)

package/kernel/mac80211/patches/rtl/001-v6.12-wifi-rtw88-Set-efuse-ext_lna_5g-fix-typo.patch

@@ -1,30 +0,0 @@
-From 8fbcaa308591b91e9037ab6a8d733873b749a70d Mon Sep 17 00:00:00 2001
-From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Date: Sat, 6 Jul 2024 01:40:58 +0300
-Subject: [PATCH] wifi: rtw88: Set efuse->ext_lna_5g - fix typo
-
-efuse->ext_lna_2g is set twice and efuse->ext_lna_5g is not set at all.
-Set each one once.
-
-Nothing uses these members right now. They will be used by the RTL8821AU
-and RTL8812AU drivers.
-
-Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Acked-by: Ping-Ke Shih <pkshih@realtek.com>
-Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
-Link: https://patch.msgid.link/8ccc9e13-0d45-417d-8f88-93a0ad294f77@gmail.com
----
- drivers/net/wireless/realtek/rtw88/main.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/realtek/rtw88/main.c
-+++ b/drivers/net/wireless/realtek/rtw88/main.c
-@@ -2006,7 +2006,7 @@ static int rtw_chip_efuse_info_setup(str
- 	efuse->ext_pa_2g = efuse->pa_type_2g & BIT(4) ? 1 : 0;
- 	efuse->ext_lna_2g = efuse->lna_type_2g & BIT(3) ? 1 : 0;
- 	efuse->ext_pa_5g = efuse->pa_type_5g & BIT(0) ? 1 : 0;
--	efuse->ext_lna_2g = efuse->lna_type_5g & BIT(3) ? 1 : 0;
-+	efuse->ext_lna_5g = efuse->lna_type_5g & BIT(3) ? 1 : 0;
- 
- 	if (!is_valid_ether_addr(efuse->addr)) {
- 		eth_random_addr(efuse->addr);

package/kernel/mac80211/patches/rtl/002-v6.12-wifi-rtw88-usb-Support-USB-3-with-RTL8822CU-RTL8822B.patch

@@ -1,284 +0,0 @@
-From 315c23a64e99552502dd4d18d6ddc073fad9a7c3 Mon Sep 17 00:00:00 2001
-From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Date: Thu, 11 Jul 2024 01:11:33 +0300
-Subject: [PATCH] wifi: rtw88: usb: Support USB 3 with RTL8822CU/RTL8822BU
-
-The Realtek wifi 5 devices which support USB 3 are weird: when first
-plugged in, they pretend to be USB 2. The driver needs to send some
-commands to the device, which make it disappear and come back as a
-USB 3 device.
-
-Implement the required commands in rtw88.
-
-When a USB 3 device is plugged into a USB 2 port, rtw88 will try to
-switch it to USB 3 mode only once. The device will disappear and come
-back still in USB 2 mode, of course.
-
-Some people experience heavy interference in the 2.4 GHz band in
-USB 3 mode, so add a module parameter switch_usb_mode with the
-default value 1 to let people disable the switching.
-
-Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Acked-by: Ping-Ke Shih <pkshih@realtek.com>
-Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
-Link: https://patch.msgid.link/77906c62-5674-426f-bde1-1b2a12a0339d@gmail.com
----
- drivers/net/wireless/realtek/rtw88/debug.h    |  1 +
- drivers/net/wireless/realtek/rtw88/main.h     |  2 +
- drivers/net/wireless/realtek/rtw88/reg.h      | 11 +++
- drivers/net/wireless/realtek/rtw88/rtw8822b.c |  1 +
- drivers/net/wireless/realtek/rtw88/rtw8822b.h |  4 +-
- drivers/net/wireless/realtek/rtw88/rtw8822c.c |  1 +
- drivers/net/wireless/realtek/rtw88/rtw8822c.h | 24 +++---
- drivers/net/wireless/realtek/rtw88/usb.c      | 84 +++++++++++++++++++
- 8 files changed, 116 insertions(+), 12 deletions(-)
-
---- a/drivers/net/wireless/realtek/rtw88/debug.h
-+++ b/drivers/net/wireless/realtek/rtw88/debug.h
-@@ -25,6 +25,7 @@ enum rtw_debug_mask {
- 	RTW_DBG_HW_SCAN		= 0x00010000,
- 	RTW_DBG_STATE		= 0x00020000,
- 	RTW_DBG_SDIO		= 0x00040000,
-+	RTW_DBG_USB		= 0x00080000,
- 
- 	RTW_DBG_UNEXP		= 0x80000000,
- 	RTW_DBG_ALL		= 0xffffffff
---- a/drivers/net/wireless/realtek/rtw88/main.h
-+++ b/drivers/net/wireless/realtek/rtw88/main.h
-@@ -1785,6 +1785,8 @@ struct rtw_efuse {
- 	bool share_ant;
- 	u8 bt_setting;
- 
-+	u8 usb_mode_switch;
-+
- 	struct {
- 		u8 hci;
- 		u8 bw;
---- a/drivers/net/wireless/realtek/rtw88/reg.h
-+++ b/drivers/net/wireless/realtek/rtw88/reg.h
-@@ -15,6 +15,7 @@
- #define BIT_WLOCK_1C_B6		BIT(5)
- #define REG_SYS_PW_CTRL		0x0004
- #define BIT_PFM_WOWL		BIT(3)
-+#define BIT_APFM_OFFMAC		BIT(9)
- #define REG_SYS_CLK_CTRL	0x0008
- #define BIT_CPU_CLK_EN		BIT(14)
- 
-@@ -133,6 +134,14 @@
- #define REG_PMC_DBG_CTRL1	0xa8
- #define BITS_PMC_BT_IQK_STS	GENMASK(22, 21)
- 
-+#define REG_PAD_CTRL2		0x00C4
-+#define BIT_RSM_EN_V1		BIT(16)
-+#define BIT_NO_PDN_CHIPOFF_V1	BIT(17)
-+#define BIT_MASK_USB23_SW_MODE_V1	GENMASK(19, 18)
-+#define BIT_USB3_USB2_TRANSITION	BIT(20)
-+#define BIT_USB_MODE_U2		1
-+#define BIT_USB_MODE_U3		2
-+
- #define REG_EFUSE_ACCESS	0x00CF
- #define EFUSE_ACCESS_ON		0x69
- #define EFUSE_ACCESS_OFF	0x00
-@@ -568,6 +577,8 @@
- #define BIT_WL_SECURITY_CLK	BIT(15)
- #define BIT_DDMA_EN		BIT(8)
- 
-+#define REG_SW_MDIO		0x10C0
-+
- #define REG_H2C_PKT_READADDR	0x10D0
- #define REG_H2C_PKT_WRITEADDR	0x10D4
- #define REG_FW_DBG6		0x10F8
---- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
-+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
-@@ -46,6 +46,7 @@ static int rtw8822b_read_efuse(struct rt
- 
- 	map = (struct rtw8822b_efuse *)log_map;
- 
-+	efuse->usb_mode_switch = u8_get_bits(map->usb_mode, BIT(7));
- 	efuse->rfe_option = map->rfe_option;
- 	efuse->rf_board_option = map->rf_board_option;
- 	efuse->crystal_cap = map->xtal_k;
---- a/drivers/net/wireless/realtek/rtw88/rtw8822b.h
-+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.h
-@@ -72,7 +72,9 @@ struct rtw8822bs_efuse {
- 
- struct rtw8822b_efuse {
- 	__le16 rtl_id;
--	u8 res0[0x0e];
-+	u8 res0[4];
-+	u8 usb_mode;
-+	u8 res1[0x09];
- 
- 	/* power index for four RF paths */
- 	struct rtw_txpwr_idx txpwr_idx_table[4];
---- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
-+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
-@@ -49,6 +49,7 @@ static int rtw8822c_read_efuse(struct rt
- 
- 	map = (struct rtw8822c_efuse *)log_map;
- 
-+	efuse->usb_mode_switch = u8_get_bits(map->usb_mode, BIT(7));
- 	efuse->rfe_option = map->rfe_option;
- 	efuse->rf_board_option = map->rf_board_option;
- 	efuse->crystal_cap = map->xtal_k & XCAP_MASK;
---- a/drivers/net/wireless/realtek/rtw88/rtw8822c.h
-+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
-@@ -59,16 +59,18 @@ struct rtw8822ce_efuse {
- 
- struct rtw8822c_efuse {
- 	__le16 rtl_id;
--	u8 res0[0x0e];
-+	u8 res0[4];
-+	u8 usb_mode;
-+	u8 res1[0x09];
- 
- 	/* power index for four RF paths */
- 	struct rtw_txpwr_idx txpwr_idx_table[4];
- 
- 	u8 channel_plan;		/* 0xb8 */
- 	u8 xtal_k;
--	u8 res1;
-+	u8 res2;
- 	u8 iqk_lck;
--	u8 res2[5];			/* 0xbc */
-+	u8 res3[5];			/* 0xbc */
- 	u8 rf_board_option;
- 	u8 rf_feature_option;
- 	u8 rf_bt_setting;
-@@ -80,21 +82,21 @@ struct rtw8822c_efuse {
- 	u8 rf_antenna_option;		/* 0xc9 */
- 	u8 rfe_option;
- 	u8 country_code[2];
--	u8 res3[3];
-+	u8 res4[3];
- 	u8 path_a_thermal;		/* 0xd0 */
- 	u8 path_b_thermal;
--	u8 res4[2];
-+	u8 res5[2];
- 	u8 rx_gain_gap_2g_ofdm;
--	u8 res5;
--	u8 rx_gain_gap_2g_cck;
- 	u8 res6;
--	u8 rx_gain_gap_5gl;
-+	u8 rx_gain_gap_2g_cck;
- 	u8 res7;
--	u8 rx_gain_gap_5gm;
-+	u8 rx_gain_gap_5gl;
- 	u8 res8;
--	u8 rx_gain_gap_5gh;
-+	u8 rx_gain_gap_5gm;
- 	u8 res9;
--	u8 res10[0x42];
-+	u8 rx_gain_gap_5gh;
-+	u8 res10;
-+	u8 res11[0x42];
- 	union {
- 		struct rtw8822ce_efuse e;
- 		struct rtw8822cu_efuse u;
---- a/drivers/net/wireless/realtek/rtw88/usb.c
-+++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -14,6 +14,11 @@
- #include "ps.h"
- #include "usb.h"
- 
-+static bool rtw_switch_usb_mode = true;
-+module_param_named(switch_usb_mode, rtw_switch_usb_mode, bool, 0644);
-+MODULE_PARM_DESC(switch_usb_mode,
-+		 "Set to N to disable switching to USB 3 mode to avoid potential interference in the 2.4 GHz band (default: Y)");
-+
- #define RTW_USB_MAX_RXQ_LEN	512
- 
- struct rtw_usb_txcb {
-@@ -841,6 +846,77 @@ static void rtw_usb_intf_deinit(struct r
- 	usb_set_intfdata(intf, NULL);
- }
- 
-+static int rtw_usb_switch_mode_new(struct rtw_dev *rtwdev)
-+{
-+	enum usb_device_speed cur_speed;
-+	u8 id = rtwdev->chip->id;
-+	bool can_switch;
-+	u32 pad_ctrl2;
-+
-+	if (rtw_read8(rtwdev, REG_SYS_CFG2 + 3) == 0x20)
-+		cur_speed = USB_SPEED_SUPER;
-+	else
-+		cur_speed = USB_SPEED_HIGH;
-+
-+	if (cur_speed == USB_SPEED_SUPER)
-+		return 0;
-+
-+	pad_ctrl2 = rtw_read32(rtwdev, REG_PAD_CTRL2);
-+
-+	can_switch = !!(pad_ctrl2 & (BIT_MASK_USB23_SW_MODE_V1 |
-+				     BIT_USB3_USB2_TRANSITION));
-+
-+	if (!can_switch) {
-+		rtw_dbg(rtwdev, RTW_DBG_USB,
-+			"Switching to USB 3 mode unsupported by the chip\n");
-+		return 0;
-+	}
-+
-+	/* At this point cur_speed is USB_SPEED_HIGH. If we already tried
-+	 * to switch don't try again - it's a USB 2 port.
-+	 */
-+	if (u32_get_bits(pad_ctrl2, BIT_MASK_USB23_SW_MODE_V1) == BIT_USB_MODE_U3)
-+		return 0;
-+
-+	/* Enable IO wrapper timeout */
-+	if (id == RTW_CHIP_TYPE_8822B || id == RTW_CHIP_TYPE_8821C)
-+		rtw_write8_clr(rtwdev, REG_SW_MDIO + 3, BIT(0));
-+
-+	u32p_replace_bits(&pad_ctrl2, BIT_USB_MODE_U3, BIT_MASK_USB23_SW_MODE_V1);
-+	pad_ctrl2 |= BIT_RSM_EN_V1;
-+
-+	rtw_write32(rtwdev, REG_PAD_CTRL2, pad_ctrl2);
-+	rtw_write8(rtwdev, REG_PAD_CTRL2 + 1, 4);
-+
-+	rtw_write16_set(rtwdev, REG_SYS_PW_CTRL, BIT_APFM_OFFMAC);
-+	usleep_range(1000, 1001);
-+	rtw_write32_set(rtwdev, REG_PAD_CTRL2, BIT_NO_PDN_CHIPOFF_V1);
-+
-+	return 1;
-+}
-+
-+static int rtw_usb_switch_mode(struct rtw_dev *rtwdev)
-+{
-+	u8 id = rtwdev->chip->id;
-+
-+	if (id != RTW_CHIP_TYPE_8822C && id != RTW_CHIP_TYPE_8822B)
-+		return 0;
-+
-+	if (!rtwdev->efuse.usb_mode_switch) {
-+		rtw_dbg(rtwdev, RTW_DBG_USB,
-+			"Switching to USB 3 mode disabled by chip's efuse\n");
-+		return 0;
-+	}
-+
-+	if (!rtw_switch_usb_mode) {
-+		rtw_dbg(rtwdev, RTW_DBG_USB,
-+			"Switching to USB 3 mode disabled by module parameter\n");
-+		return 0;
-+	}
-+
-+	return rtw_usb_switch_mode_new(rtwdev);
-+}
-+
- int rtw_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
- {
- 	struct rtw_dev *rtwdev;
-@@ -896,6 +972,14 @@ int rtw_usb_probe(struct usb_interface *
- 		goto err_destroy_rxwq;
- 	}
- 
-+	ret = rtw_usb_switch_mode(rtwdev);
-+	if (ret) {
-+		/* Not a fail, but we do need to skip rtw_register_hw. */
-+		rtw_dbg(rtwdev, RTW_DBG_USB, "switching to USB 3 mode\n");
-+		ret = 0;
-+		goto err_destroy_rxwq;
-+	}
-+
- 	ret = rtw_register_hw(rtwdev, rtwdev->hw);
- 	if (ret) {
- 		rtw_err(rtwdev, "failed to register hw\n");

package/kernel/mac80211/patches/rtl/004-v6.12-wifi-rtw88-debugfs-support-multiple-adapters-debuggi.patch

@@ -1,454 +0,0 @@
-From 8db6c1ca64664ef9b071e6eeb646023ac5b240a8 Mon Sep 17 00:00:00 2001
-From: Ping-Ke Shih <pkshih@realtek.com>
-Date: Thu, 18 Jul 2024 14:41:55 +0800
-Subject: [PATCH] wifi: rtw88: debugfs: support multiple adapters debugging
-
-Originally in order to read partial registers from large area, we write
-a range value stored into a static variable and read registers according
-to the static variable.
-
-However, if we install more than one adapters supported by this driver,
-the static variables will be overwritten by latter adapters. To resolve
-the problem, move the static variables to struct rtw_dev for each adapter.
-
-With changes, smatch spends too much time to parse rtw_debugfs_init():
-    debug.c:1289 rtw_debugfs_init() parse error: turning off implications
-    after 60 seconds
-Move stuffs of adding debugfs entries to three rtw_debugfs_add_xxx()
-functions.
-
-Reported-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Closes: https://lore.kernel.org/linux-wireless/cd6a2acf3c2c36d938b40140b52a779516f446a9.camel@realtek.com/T/#m27662022c70d9f893ba96f6c6a8dd8fce2434dfe
-Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
-Link: https://patch.msgid.link/20240718064155.38955-1-pkshih@realtek.com
----
- drivers/net/wireless/realtek/rtw88/debug.c | 303 ++++++++++++---------
- drivers/net/wireless/realtek/rtw88/debug.h |   2 +
- drivers/net/wireless/realtek/rtw88/main.c  |   1 +
- drivers/net/wireless/realtek/rtw88/main.h  |   3 +-
- 4 files changed, 180 insertions(+), 129 deletions(-)
-
---- a/drivers/net/wireless/realtek/rtw88/debug.c
-+++ b/drivers/net/wireless/realtek/rtw88/debug.c
-@@ -43,6 +43,62 @@ struct rtw_debugfs_priv {
- 	};
- };
- 
-+struct rtw_debugfs {
-+	struct rtw_debugfs_priv mac_0;
-+	struct rtw_debugfs_priv mac_1;
-+	struct rtw_debugfs_priv mac_2;
-+	struct rtw_debugfs_priv mac_3;
-+	struct rtw_debugfs_priv mac_4;
-+	struct rtw_debugfs_priv mac_5;
-+	struct rtw_debugfs_priv mac_6;
-+	struct rtw_debugfs_priv mac_7;
-+	struct rtw_debugfs_priv mac_10;
-+	struct rtw_debugfs_priv mac_11;
-+	struct rtw_debugfs_priv mac_12;
-+	struct rtw_debugfs_priv mac_13;
-+	struct rtw_debugfs_priv mac_14;
-+	struct rtw_debugfs_priv mac_15;
-+	struct rtw_debugfs_priv mac_16;
-+	struct rtw_debugfs_priv mac_17;
-+	struct rtw_debugfs_priv bb_8;
-+	struct rtw_debugfs_priv bb_9;
-+	struct rtw_debugfs_priv bb_a;
-+	struct rtw_debugfs_priv bb_b;
-+	struct rtw_debugfs_priv bb_c;
-+	struct rtw_debugfs_priv bb_d;
-+	struct rtw_debugfs_priv bb_e;
-+	struct rtw_debugfs_priv bb_f;
-+	struct rtw_debugfs_priv bb_18;
-+	struct rtw_debugfs_priv bb_19;
-+	struct rtw_debugfs_priv bb_1a;
-+	struct rtw_debugfs_priv bb_1b;
-+	struct rtw_debugfs_priv bb_1c;
-+	struct rtw_debugfs_priv bb_1d;
-+	struct rtw_debugfs_priv bb_1e;
-+	struct rtw_debugfs_priv bb_1f;
-+	struct rtw_debugfs_priv bb_2c;
-+	struct rtw_debugfs_priv bb_2d;
-+	struct rtw_debugfs_priv bb_40;
-+	struct rtw_debugfs_priv bb_41;
-+	struct rtw_debugfs_priv rf_dump;
-+	struct rtw_debugfs_priv tx_pwr_tbl;
-+	struct rtw_debugfs_priv write_reg;
-+	struct rtw_debugfs_priv h2c;
-+	struct rtw_debugfs_priv rf_write;
-+	struct rtw_debugfs_priv rf_read;
-+	struct rtw_debugfs_priv read_reg;
-+	struct rtw_debugfs_priv fix_rate;
-+	struct rtw_debugfs_priv dump_cam;
-+	struct rtw_debugfs_priv rsvd_page;
-+	struct rtw_debugfs_priv phy_info;
-+	struct rtw_debugfs_priv coex_enable;
-+	struct rtw_debugfs_priv coex_info;
-+	struct rtw_debugfs_priv edcca_enable;
-+	struct rtw_debugfs_priv fw_crash;
-+	struct rtw_debugfs_priv force_lowest_basic_rate;
-+	struct rtw_debugfs_priv dm_cap;
-+};
-+
- static const char * const rtw_dm_cap_strs[] = {
- 	[RTW_DM_CAP_NA] = "NA",
- 	[RTW_DM_CAP_TXGAPK] = "TXGAPK",
-@@ -524,7 +580,7 @@ static int rtw_debug_get_bb_page(struct
- 	return 0;
- }
- 
--static int rtw_debug_get_rf_dump(struct seq_file *m, void *v)
-+static int rtw_debugfs_get_rf_dump(struct seq_file *m, void *v)
- {
- 	struct rtw_debugfs_priv *debugfs_priv = m->private;
- 	struct rtw_dev *rtwdev = debugfs_priv->rtwdev;
-@@ -1074,139 +1130,102 @@ static int rtw_debugfs_get_dm_cap(struct
- 	return 0;
- }
- 
--#define rtw_debug_impl_mac(page, addr)				\
--static struct rtw_debugfs_priv rtw_debug_priv_mac_ ##page = {	\
-+#define rtw_debug_priv_mac(addr)				\
-+{								\
- 	.cb_read = rtw_debug_get_mac_page,			\
- 	.cb_data = addr,					\
- }
- 
--rtw_debug_impl_mac(0, 0x0000);
--rtw_debug_impl_mac(1, 0x0100);
--rtw_debug_impl_mac(2, 0x0200);
--rtw_debug_impl_mac(3, 0x0300);
--rtw_debug_impl_mac(4, 0x0400);
--rtw_debug_impl_mac(5, 0x0500);
--rtw_debug_impl_mac(6, 0x0600);
--rtw_debug_impl_mac(7, 0x0700);
--rtw_debug_impl_mac(10, 0x1000);
--rtw_debug_impl_mac(11, 0x1100);
--rtw_debug_impl_mac(12, 0x1200);
--rtw_debug_impl_mac(13, 0x1300);
--rtw_debug_impl_mac(14, 0x1400);
--rtw_debug_impl_mac(15, 0x1500);
--rtw_debug_impl_mac(16, 0x1600);
--rtw_debug_impl_mac(17, 0x1700);
--
--#define rtw_debug_impl_bb(page, addr)			\
--static struct rtw_debugfs_priv rtw_debug_priv_bb_ ##page = {	\
-+#define rtw_debug_priv_bb(addr)					\
-+{								\
- 	.cb_read = rtw_debug_get_bb_page,			\
- 	.cb_data = addr,					\
- }
- 
--rtw_debug_impl_bb(8, 0x0800);
--rtw_debug_impl_bb(9, 0x0900);
--rtw_debug_impl_bb(a, 0x0a00);
--rtw_debug_impl_bb(b, 0x0b00);
--rtw_debug_impl_bb(c, 0x0c00);
--rtw_debug_impl_bb(d, 0x0d00);
--rtw_debug_impl_bb(e, 0x0e00);
--rtw_debug_impl_bb(f, 0x0f00);
--rtw_debug_impl_bb(18, 0x1800);
--rtw_debug_impl_bb(19, 0x1900);
--rtw_debug_impl_bb(1a, 0x1a00);
--rtw_debug_impl_bb(1b, 0x1b00);
--rtw_debug_impl_bb(1c, 0x1c00);
--rtw_debug_impl_bb(1d, 0x1d00);
--rtw_debug_impl_bb(1e, 0x1e00);
--rtw_debug_impl_bb(1f, 0x1f00);
--rtw_debug_impl_bb(2c, 0x2c00);
--rtw_debug_impl_bb(2d, 0x2d00);
--rtw_debug_impl_bb(40, 0x4000);
--rtw_debug_impl_bb(41, 0x4100);
--
--static struct rtw_debugfs_priv rtw_debug_priv_rf_dump = {
--	.cb_read = rtw_debug_get_rf_dump,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_tx_pwr_tbl = {
--	.cb_read = rtw_debugfs_get_tx_pwr_tbl,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_write_reg = {
--	.cb_write = rtw_debugfs_set_write_reg,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_h2c = {
--	.cb_write = rtw_debugfs_set_h2c,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_rf_write = {
--	.cb_write = rtw_debugfs_set_rf_write,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_rf_read = {
--	.cb_write = rtw_debugfs_set_rf_read,
--	.cb_read = rtw_debugfs_get_rf_read,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_read_reg = {
--	.cb_write = rtw_debugfs_set_read_reg,
--	.cb_read = rtw_debugfs_get_read_reg,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_fix_rate = {
--	.cb_write = rtw_debugfs_set_fix_rate,
--	.cb_read = rtw_debugfs_get_fix_rate,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_dump_cam = {
--	.cb_write = rtw_debugfs_set_single_input,
--	.cb_read = rtw_debugfs_get_dump_cam,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_rsvd_page = {
--	.cb_write = rtw_debugfs_set_rsvd_page,
--	.cb_read = rtw_debugfs_get_rsvd_page,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_phy_info = {
--	.cb_read = rtw_debugfs_get_phy_info,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_coex_enable = {
--	.cb_write = rtw_debugfs_set_coex_enable,
--	.cb_read = rtw_debugfs_get_coex_enable,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_coex_info = {
--	.cb_read = rtw_debugfs_get_coex_info,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_edcca_enable = {
--	.cb_write = rtw_debugfs_set_edcca_enable,
--	.cb_read = rtw_debugfs_get_edcca_enable,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_fw_crash = {
--	.cb_write = rtw_debugfs_set_fw_crash,
--	.cb_read = rtw_debugfs_get_fw_crash,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_force_lowest_basic_rate = {
--	.cb_write = rtw_debugfs_set_force_lowest_basic_rate,
--	.cb_read = rtw_debugfs_get_force_lowest_basic_rate,
--};
--
--static struct rtw_debugfs_priv rtw_debug_priv_dm_cap = {
--	.cb_write = rtw_debugfs_set_dm_cap,
--	.cb_read = rtw_debugfs_get_dm_cap,
-+#define rtw_debug_priv_get(name)				\
-+{								\
-+	.cb_read = rtw_debugfs_get_ ##name,			\
-+}
-+
-+#define rtw_debug_priv_set(name)				\
-+{								\
-+	.cb_write = rtw_debugfs_set_ ##name,			\
-+}
-+
-+#define rtw_debug_priv_set_and_get(name)			\
-+{								\
-+	.cb_write = rtw_debugfs_set_ ##name,			\
-+	.cb_read = rtw_debugfs_get_ ##name,			\
-+}
-+
-+#define rtw_debug_priv_set_single_and_get(name)			\
-+{								\
-+	.cb_write = rtw_debugfs_set_single_input,		\
-+	.cb_read = rtw_debugfs_get_ ##name,			\
-+}
-+
-+static const struct rtw_debugfs rtw_debugfs_templ = {
-+	.mac_0 = rtw_debug_priv_mac(0x0000),
-+	.mac_1 = rtw_debug_priv_mac(0x0100),
-+	.mac_2 = rtw_debug_priv_mac(0x0200),
-+	.mac_3 = rtw_debug_priv_mac(0x0300),
-+	.mac_4 = rtw_debug_priv_mac(0x0400),
-+	.mac_5 = rtw_debug_priv_mac(0x0500),
-+	.mac_6 = rtw_debug_priv_mac(0x0600),
-+	.mac_7 = rtw_debug_priv_mac(0x0700),
-+	.mac_10 = rtw_debug_priv_mac(0x1000),
-+	.mac_11 = rtw_debug_priv_mac(0x1100),
-+	.mac_12 = rtw_debug_priv_mac(0x1200),
-+	.mac_13 = rtw_debug_priv_mac(0x1300),
-+	.mac_14 = rtw_debug_priv_mac(0x1400),
-+	.mac_15 = rtw_debug_priv_mac(0x1500),
-+	.mac_16 = rtw_debug_priv_mac(0x1600),
-+	.mac_17 = rtw_debug_priv_mac(0x1700),
-+	.bb_8 = rtw_debug_priv_bb(0x0800),
-+	.bb_9 = rtw_debug_priv_bb(0x0900),
-+	.bb_a = rtw_debug_priv_bb(0x0a00),
-+	.bb_b = rtw_debug_priv_bb(0x0b00),
-+	.bb_c = rtw_debug_priv_bb(0x0c00),
-+	.bb_d = rtw_debug_priv_bb(0x0d00),
-+	.bb_e = rtw_debug_priv_bb(0x0e00),
-+	.bb_f = rtw_debug_priv_bb(0x0f00),
-+	.bb_18 = rtw_debug_priv_bb(0x1800),
-+	.bb_19 = rtw_debug_priv_bb(0x1900),
-+	.bb_1a = rtw_debug_priv_bb(0x1a00),
-+	.bb_1b = rtw_debug_priv_bb(0x1b00),
-+	.bb_1c = rtw_debug_priv_bb(0x1c00),
-+	.bb_1d = rtw_debug_priv_bb(0x1d00),
-+	.bb_1e = rtw_debug_priv_bb(0x1e00),
-+	.bb_1f = rtw_debug_priv_bb(0x1f00),
-+	.bb_2c = rtw_debug_priv_bb(0x2c00),
-+	.bb_2d = rtw_debug_priv_bb(0x2d00),
-+	.bb_40 = rtw_debug_priv_bb(0x4000),
-+	.bb_41 = rtw_debug_priv_bb(0x4100),
-+	.rf_dump = rtw_debug_priv_get(rf_dump),
-+	.tx_pwr_tbl = rtw_debug_priv_get(tx_pwr_tbl),
-+	.write_reg = rtw_debug_priv_set(write_reg),
-+	.h2c = rtw_debug_priv_set(h2c),
-+	.rf_write = rtw_debug_priv_set(rf_write),
-+	.rf_read = rtw_debug_priv_set_and_get(rf_read),
-+	.read_reg = rtw_debug_priv_set_and_get(read_reg),
-+	.fix_rate = rtw_debug_priv_set_and_get(fix_rate),
-+	.dump_cam = rtw_debug_priv_set_single_and_get(dump_cam),
-+	.rsvd_page = rtw_debug_priv_set_and_get(rsvd_page),
-+	.phy_info = rtw_debug_priv_get(phy_info),
-+	.coex_enable = rtw_debug_priv_set_and_get(coex_enable),
-+	.coex_info = rtw_debug_priv_get(coex_info),
-+	.edcca_enable = rtw_debug_priv_set_and_get(edcca_enable),
-+	.fw_crash = rtw_debug_priv_set_and_get(fw_crash),
-+	.force_lowest_basic_rate = rtw_debug_priv_set_and_get(force_lowest_basic_rate),
-+	.dm_cap = rtw_debug_priv_set_and_get(dm_cap),
- };
- 
- #define rtw_debugfs_add_core(name, mode, fopname, parent)		\
- 	do {								\
--		rtw_debug_priv_ ##name.rtwdev = rtwdev;			\
-+		struct rtw_debugfs_priv *priv = &rtwdev->debugfs->name;	\
-+		priv->rtwdev = rtwdev;					\
- 		if (IS_ERR(debugfs_create_file(#name, mode,		\
--					 parent, &rtw_debug_priv_ ##name,\
-+					 parent, priv,			\
- 					 &file_ops_ ##fopname)))	\
- 			pr_debug("Unable to initialize debugfs:%s\n",	\
- 			       #name);					\
-@@ -1219,12 +1238,9 @@ static struct rtw_debugfs_priv rtw_debug
- #define rtw_debugfs_add_r(name)						\
- 	rtw_debugfs_add_core(name, S_IFREG | 0444, single_r, debugfs_topdir)
- 
--void rtw_debugfs_init(struct rtw_dev *rtwdev)
-+static
-+void rtw_debugfs_add_basic(struct rtw_dev *rtwdev, struct dentry *debugfs_topdir)
- {
--	struct dentry *debugfs_topdir;
--
--	debugfs_topdir = debugfs_create_dir("rtw88",
--					    rtwdev->hw->wiphy->debugfsdir);
- 	rtw_debugfs_add_w(write_reg);
- 	rtw_debugfs_add_rw(read_reg);
- 	rtw_debugfs_add_w(rf_write);
-@@ -1236,6 +1252,17 @@ void rtw_debugfs_init(struct rtw_dev *rt
- 	rtw_debugfs_add_r(coex_info);
- 	rtw_debugfs_add_rw(coex_enable);
- 	rtw_debugfs_add_w(h2c);
-+	rtw_debugfs_add_r(rf_dump);
-+	rtw_debugfs_add_r(tx_pwr_tbl);
-+	rtw_debugfs_add_rw(edcca_enable);
-+	rtw_debugfs_add_rw(fw_crash);
-+	rtw_debugfs_add_rw(force_lowest_basic_rate);
-+	rtw_debugfs_add_rw(dm_cap);
-+}
-+
-+static
-+void rtw_debugfs_add_sec0(struct rtw_dev *rtwdev, struct dentry *debugfs_topdir)
-+{
- 	rtw_debugfs_add_r(mac_0);
- 	rtw_debugfs_add_r(mac_1);
- 	rtw_debugfs_add_r(mac_2);
-@@ -1252,6 +1279,11 @@ void rtw_debugfs_init(struct rtw_dev *rt
- 	rtw_debugfs_add_r(bb_d);
- 	rtw_debugfs_add_r(bb_e);
- 	rtw_debugfs_add_r(bb_f);
-+}
-+
-+static
-+void rtw_debugfs_add_sec1(struct rtw_dev *rtwdev, struct dentry *debugfs_topdir)
-+{
- 	rtw_debugfs_add_r(mac_10);
- 	rtw_debugfs_add_r(mac_11);
- 	rtw_debugfs_add_r(mac_12);
-@@ -1274,14 +1306,29 @@ void rtw_debugfs_init(struct rtw_dev *rt
- 		rtw_debugfs_add_r(bb_40);
- 		rtw_debugfs_add_r(bb_41);
- 	}
--	rtw_debugfs_add_r(rf_dump);
--	rtw_debugfs_add_r(tx_pwr_tbl);
--	rtw_debugfs_add_rw(edcca_enable);
--	rtw_debugfs_add_rw(fw_crash);
--	rtw_debugfs_add_rw(force_lowest_basic_rate);
--	rtw_debugfs_add_rw(dm_cap);
- }
- 
-+void rtw_debugfs_init(struct rtw_dev *rtwdev)
-+{
-+	struct dentry *debugfs_topdir;
-+
-+	rtwdev->debugfs = kmemdup(&rtw_debugfs_templ, sizeof(rtw_debugfs_templ),
-+				  GFP_KERNEL);
-+	if (!rtwdev->debugfs)
-+		return;
-+
-+	debugfs_topdir = debugfs_create_dir("rtw88",
-+					    rtwdev->hw->wiphy->debugfsdir);
-+
-+	rtw_debugfs_add_basic(rtwdev, debugfs_topdir);
-+	rtw_debugfs_add_sec0(rtwdev, debugfs_topdir);
-+	rtw_debugfs_add_sec1(rtwdev, debugfs_topdir);
-+}
-+
-+void rtw_debugfs_deinit(struct rtw_dev *rtwdev)
-+{
-+	kfree(rtwdev->debugfs);
-+}
- #endif /* CPTCFG_RTW88_DEBUGFS */
- 
- #ifdef CPTCFG_RTW88_DEBUG
---- a/drivers/net/wireless/realtek/rtw88/debug.h
-+++ b/drivers/net/wireless/realtek/rtw88/debug.h
-@@ -34,11 +34,13 @@ enum rtw_debug_mask {
- #ifdef CPTCFG_RTW88_DEBUGFS
- 
- void rtw_debugfs_init(struct rtw_dev *rtwdev);
-+void rtw_debugfs_deinit(struct rtw_dev *rtwdev);
- void rtw_debugfs_get_simple_phy_info(struct seq_file *m);
- 
- #else
- 
- static inline void rtw_debugfs_init(struct rtw_dev *rtwdev) {}
-+static inline void rtw_debugfs_deinit(struct rtw_dev *rtwdev) {}
- 
- #endif /* CPTCFG_RTW88_DEBUGFS */
- 
---- a/drivers/net/wireless/realtek/rtw88/main.c
-+++ b/drivers/net/wireless/realtek/rtw88/main.c
-@@ -2300,6 +2300,7 @@ void rtw_unregister_hw(struct rtw_dev *r
- 
- 	ieee80211_unregister_hw(hw);
- 	rtw_unset_supported_band(hw, chip);
-+	rtw_debugfs_deinit(rtwdev);
- }
- EXPORT_SYMBOL(rtw_unregister_hw);
- 
---- a/drivers/net/wireless/realtek/rtw88/main.h
-+++ b/drivers/net/wireless/realtek/rtw88/main.h
-@@ -50,6 +50,7 @@ extern const struct ieee80211_ops rtw_op
- #define RTW_MAX_CHANNEL_NUM_5G 49
- 
- struct rtw_dev;
-+struct rtw_debugfs;
- 
- enum rtw_hci_type {
- 	RTW_HCI_TYPE_PCIE,
-@@ -2053,7 +2054,7 @@ struct rtw_dev {
- 	bool beacon_loss;
- 	struct completion lps_leave_check;
- 
--	struct dentry *debugfs;
-+	struct rtw_debugfs *debugfs;
- 
- 	u8 sta_cnt;
- 	u32 rts_threshold;

package/kernel/mac80211/patches/rtl/005-v6.12-wifi-rtw88-select-WANT_DEV_COREDUMP.patch

@@ -1,25 +0,0 @@
-From 7e989b0c1e33210c07340bf5228aa83ea52515b5 Mon Sep 17 00:00:00 2001
-From: Zong-Zhe Yang <kevin_yang@realtek.com>
-Date: Thu, 18 Jul 2024 15:06:15 +0800
-Subject: [PATCH] wifi: rtw88: select WANT_DEV_COREDUMP
-
-We have invoked device coredump when fw crash.
-Should select WANT_DEV_COREDUMP by ourselves.
-
-Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
-Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
-Link: https://patch.msgid.link/20240718070616.42217-1-pkshih@realtek.com
----
- drivers/net/wireless/realtek/rtw88/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/wireless/realtek/rtw88/Kconfig
-+++ b/drivers/net/wireless/realtek/rtw88/Kconfig
-@@ -14,6 +14,7 @@ if RTW88
- config RTW88_CORE
- 	tristate
- 	depends on m
-+	select BPAUTO_WANT_DEV_COREDUMP
- 
- config RTW88_PCI
- 	tristate

package/kernel/mac80211/patches/rtl/008-v6.12-wifi-rtw88-8822c-Parse-channel-from-IE-to-correct-in.patch

@@ -1,151 +0,0 @@
-From 53ed4b25a79aeec5991c2dc579e635b136ef7676 Mon Sep 17 00:00:00 2001
-From: Po-Hao Huang <phhuang@realtek.com>
-Date: Wed, 24 Jul 2024 13:05:01 +0800
-Subject: [PATCH] wifi: rtw88: 8822c: Parse channel from IE to correct invalid
- hardware reports
-
-For CCK packets we could get incorrect reports from hardware.
-And this causes wrong frequencies being reported. Parse the channel
-information from IE if provided by AP to fix this.
-
-Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
-Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
-Link: https://patch.msgid.link/20240724050501.7550-1-pkshih@realtek.com
----
- drivers/net/wireless/realtek/rtw88/main.h     |  1 +
- drivers/net/wireless/realtek/rtw88/pci.c      |  1 +
- drivers/net/wireless/realtek/rtw88/rtw8822c.c |  7 ++--
- drivers/net/wireless/realtek/rtw88/rx.c       | 41 +++++++++++++++++++
- drivers/net/wireless/realtek/rtw88/rx.h       | 13 ++++++
- drivers/net/wireless/realtek/rtw88/sdio.c     |  1 +
- drivers/net/wireless/realtek/rtw88/usb.c      |  2 +
- 7 files changed, 63 insertions(+), 3 deletions(-)
-
---- a/drivers/net/wireless/realtek/rtw88/main.h
-+++ b/drivers/net/wireless/realtek/rtw88/main.h
-@@ -623,6 +623,7 @@ struct rtw_rx_pkt_stat {
- 	bool crc_err;
- 	bool decrypted;
- 	bool is_c2h;
-+	bool channel_invalid;
- 
- 	s32 signal_power;
- 	u16 pkt_len;
---- a/drivers/net/wireless/realtek/rtw88/pci.c
-+++ b/drivers/net/wireless/realtek/rtw88/pci.c
-@@ -1088,6 +1088,7 @@ static u32 rtw_pci_rx_napi(struct rtw_de
- 			/* remove rx_desc */
- 			skb_pull(new, pkt_offset);
- 
-+			rtw_update_rx_freq_for_invalid(rtwdev, new, &rx_status, &pkt_stat);
- 			rtw_rx_stats(rtwdev, pkt_stat.vif, new);
- 			memcpy(new->cb, &rx_status, sizeof(rx_status));
- 			ieee80211_rx_napi(rtwdev->hw, NULL, new, napi);
---- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
-+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
-@@ -2576,9 +2576,10 @@ static void query_phy_status_page0(struc
- 	rx_power[RF_PATH_B] -= 110;
- 
- 	channel = GET_PHY_STAT_P0_CHANNEL(phy_status);
--	if (channel == 0)
--		channel = rtwdev->hal.current_channel;
--	rtw_set_rx_freq_band(pkt_stat, channel);
-+	if (channel != 0)
-+		rtw_set_rx_freq_band(pkt_stat, channel);
-+	else
-+		pkt_stat->channel_invalid = true;
- 
- 	pkt_stat->rx_power[RF_PATH_A] = rx_power[RF_PATH_A];
- 	pkt_stat->rx_power[RF_PATH_B] = rx_power[RF_PATH_B];
---- a/drivers/net/wireless/realtek/rtw88/rx.c
-+++ b/drivers/net/wireless/realtek/rtw88/rx.c
-@@ -146,6 +146,47 @@ static void rtw_set_rx_freq_by_pktstat(s
- 	rx_status->band = pkt_stat->band;
- }
- 
-+void rtw_update_rx_freq_from_ie(struct rtw_dev *rtwdev, struct sk_buff *skb,
-+				struct ieee80211_rx_status *rx_status,
-+				struct rtw_rx_pkt_stat *pkt_stat)
-+{
-+	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
-+	int channel = rtwdev->hal.current_channel;
-+	size_t hdr_len, ielen;
-+	int channel_number;
-+	u8 *variable;
-+
-+	if (!test_bit(RTW_FLAG_SCANNING, rtwdev->flags))
-+		goto fill_rx_status;
-+
-+	if (ieee80211_is_beacon(mgmt->frame_control)) {
-+		variable = mgmt->u.beacon.variable;
-+		hdr_len = offsetof(struct ieee80211_mgmt,
-+				   u.beacon.variable);
-+	} else if (ieee80211_is_probe_resp(mgmt->frame_control)) {
-+		variable = mgmt->u.probe_resp.variable;
-+		hdr_len = offsetof(struct ieee80211_mgmt,
-+				   u.probe_resp.variable);
-+	} else {
-+		goto fill_rx_status;
-+	}
-+
-+	if (skb->len > hdr_len)
-+		ielen = skb->len - hdr_len;
-+	else
-+		goto fill_rx_status;
-+
-+	channel_number = cfg80211_get_ies_channel_number(variable, ielen,
-+							 NL80211_BAND_2GHZ);
-+	if (channel_number != -1)
-+		channel = channel_number;
-+
-+fill_rx_status:
-+	rtw_set_rx_freq_band(pkt_stat, channel);
-+	rtw_set_rx_freq_by_pktstat(pkt_stat, rx_status);
-+}
-+EXPORT_SYMBOL(rtw_update_rx_freq_from_ie);
-+
- void rtw_rx_fill_rx_status(struct rtw_dev *rtwdev,
- 			   struct rtw_rx_pkt_stat *pkt_stat,
- 			   struct ieee80211_hdr *hdr,
---- a/drivers/net/wireless/realtek/rtw88/rx.h
-+++ b/drivers/net/wireless/realtek/rtw88/rx.h
-@@ -50,5 +50,18 @@ void rtw_rx_fill_rx_status(struct rtw_de
- 			   struct ieee80211_hdr *hdr,
- 			   struct ieee80211_rx_status *rx_status,
- 			   u8 *phy_status);
-+void rtw_update_rx_freq_from_ie(struct rtw_dev *rtwdev, struct sk_buff *skb,
-+				struct ieee80211_rx_status *rx_status,
-+				struct rtw_rx_pkt_stat *pkt_stat);
-+
-+static inline
-+void rtw_update_rx_freq_for_invalid(struct rtw_dev *rtwdev, struct sk_buff *skb,
-+				    struct ieee80211_rx_status *rx_status,
-+				    struct rtw_rx_pkt_stat *pkt_stat)
-+{
-+	if (pkt_stat->channel_invalid)
-+		rtw_update_rx_freq_from_ie(rtwdev, skb, rx_status, pkt_stat);
-+}
-+
- 
- #endif
---- a/drivers/net/wireless/realtek/rtw88/sdio.c
-+++ b/drivers/net/wireless/realtek/rtw88/sdio.c
-@@ -948,6 +948,7 @@ static void rtw_sdio_rx_skb(struct rtw_d
- 	skb_put(skb, pkt_stat->pkt_len);
- 	skb_reserve(skb, pkt_offset);
- 
-+	rtw_update_rx_freq_for_invalid(rtwdev, skb, rx_status, pkt_stat);
- 	rtw_rx_stats(rtwdev, pkt_stat->vif, skb);
- 
- 	ieee80211_rx_irqsafe(rtwdev->hw, skb);
---- a/drivers/net/wireless/realtek/rtw88/usb.c
-+++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -579,6 +579,8 @@ static void rtw_usb_rx_handler(struct wo
- 
- 		skb_put(skb, pkt_stat.pkt_len);
- 		skb_reserve(skb, pkt_offset);
-+
-+		rtw_update_rx_freq_for_invalid(rtwdev, skb, &rx_status, &pkt_stat);
- 		memcpy(skb->cb, &rx_status, sizeof(rx_status));
- 		ieee80211_rx_irqsafe(rtwdev->hw, skb);
- 	}

package/kernel/mac80211/patches/rtl/010-v6.12-wifi-rtw88-usb-Init-RX-burst-length-according-to-USB.patch

@@ -1,73 +0,0 @@
-From fbbd8cb347e25b68d25c4f3871821afc495ee7a9 Mon Sep 17 00:00:00 2001
-From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Date: Thu, 8 Aug 2024 01:19:36 +0300
-Subject: [PATCH] wifi: rtw88: usb: Init RX burst length according to USB speed
-
-This is needed in order to make USB RX aggregation work with RTL8811CU
-(and presumably RTL8822BU and RTL8822CU also).
-
-I don't know what BIT_DMA_BURST_CNT, BIT_DMA_MODE, and BIT_DROP_DATA_EN
-are doing.
-
-Tested with RTL8822CU, RTL8811CU, and RTL8723DU.
-
-The RX speed is unchanged in my tests.
-
-Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
-Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
-Link: https://patch.msgid.link/ac569c6f-7129-4341-b523-901fe10cabff@gmail.com
----
- drivers/net/wireless/realtek/rtw88/reg.h |  6 ++++++
- drivers/net/wireless/realtek/rtw88/usb.c | 23 ++++++++++++++++++++++-
- 2 files changed, 28 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/realtek/rtw88/reg.h
-+++ b/drivers/net/wireless/realtek/rtw88/reg.h
-@@ -322,6 +322,12 @@
- #define REG_RXDMA_DPR		0x028C
- #define REG_RXDMA_MODE		0x0290
- #define BIT_DMA_MODE		BIT(1)
-+#define BIT_DMA_BURST_CNT	GENMASK(3, 2)
-+#define BIT_DMA_BURST_SIZE	GENMASK(5, 4)
-+#define BIT_DMA_BURST_SIZE_64	2
-+#define BIT_DMA_BURST_SIZE_512	1
-+#define BIT_DMA_BURST_SIZE_1024	0
-+
- #define REG_RXPKTNUM		0x02B0
- 
- #define REG_INT_MIG		0x0304
---- a/drivers/net/wireless/realtek/rtw88/usb.c
-+++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -720,9 +720,30 @@ static void rtw_usb_link_ps(struct rtw_d
- 	/* empty function for rtw_hci_ops */
- }
- 
-+static void rtw_usb_init_burst_pkt_len(struct rtw_dev *rtwdev)
-+{
-+	struct rtw_usb *rtwusb = rtw_get_usb_priv(rtwdev);
-+	enum usb_device_speed speed = rtwusb->udev->speed;
-+	u8 rxdma, burst_size;
-+
-+	rxdma = BIT_DMA_BURST_CNT | BIT_DMA_MODE;
-+
-+	if (speed == USB_SPEED_SUPER)
-+		burst_size = BIT_DMA_BURST_SIZE_1024;
-+	else if (speed == USB_SPEED_HIGH)
-+		burst_size = BIT_DMA_BURST_SIZE_512;
-+	else
-+		burst_size = BIT_DMA_BURST_SIZE_64;
-+
-+	u8p_replace_bits(&rxdma, burst_size, BIT_DMA_BURST_SIZE);
-+
-+	rtw_write8(rtwdev, REG_RXDMA_MODE, rxdma);
-+	rtw_write16_set(rtwdev, REG_TXDMA_OFFSET_CHK, BIT_DROP_DATA_EN);
-+}
-+
- static void rtw_usb_interface_cfg(struct rtw_dev *rtwdev)
- {
--	/* empty function for rtw_hci_ops */
-+	rtw_usb_init_burst_pkt_len(rtwdev);
- }
- 
- static struct rtw_hci_ops rtw_usb_ops = {

package/kernel/mac80211/patches/rtl/011-v6.12-wifi-rtw88-usb-Update-the-RX-stats-after-every-frame.patch

@@ -1,31 +0,0 @@
-From 38ea04a79ad0f8cc30bb5e9ad98d665e4ae5060c Mon Sep 17 00:00:00 2001
-From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Date: Thu, 8 Aug 2024 01:20:36 +0300
-Subject: [PATCH] wifi: rtw88: usb: Update the RX stats after every frame
-
-Update the number of received unicast data frames and bytes every time
-a frame is received. This is what the PCI and SDIO drivers do.
-
-This has an influence on the power saving, bluetooth coexistence, and
-(in a future patch) the use of RX aggregation.
-
-Tested with RTL8822CU, RTL8811CU, and RTL8723DU.
-
-Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
-Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
-Link: https://patch.msgid.link/75a2ca52-8f01-45c5-926f-d3a68ae3b284@gmail.com
----
- drivers/net/wireless/realtek/rtw88/usb.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/wireless/realtek/rtw88/usb.c
-+++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -581,6 +581,7 @@ static void rtw_usb_rx_handler(struct wo
- 		skb_reserve(skb, pkt_offset);
- 
- 		rtw_update_rx_freq_for_invalid(rtwdev, skb, &rx_status, &pkt_stat);
-+		rtw_rx_stats(rtwdev, pkt_stat.vif, skb);
- 		memcpy(skb->cb, &rx_status, sizeof(rx_status));
- 		ieee80211_rx_irqsafe(rtwdev->hw, skb);
- 	}

package/kernel/mac80211/patches/rtl/012-v6.12-wifi-rtw88-usb-Support-RX-aggregation.patch

@@ -1,118 +0,0 @@
-From df3d8f463b1dfc7cb8f4fb52b1b81d290b850d03 Mon Sep 17 00:00:00 2001
-From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Date: Thu, 8 Aug 2024 01:21:36 +0300
-Subject: [PATCH] wifi: rtw88: usb: Support RX aggregation
-
-The chips can be configured to aggregate several frames into a single
-USB transfer. Modify rtw_usb_rx_handler() to support this case.
-
-RX aggregation improves the RX speed of RTL8811CU on certain ARM
-systems, like the NanoPi NEO Core2. It also improves the RX speed of
-RTL8822CU on some x86_64 systems.
-
-Currently none of the chips are configured to aggregate frames.
-
-Tested with RTL8822CU, RTL8811CU, and RTL8723DU.
-
-Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
-Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
-Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
-Link: https://patch.msgid.link/f845826d-de71-492d-9a22-e48c07989a1f@gmail.com
----
- drivers/net/wireless/realtek/rtw88/usb.c | 61 ++++++++++++++++--------
- 1 file changed, 40 insertions(+), 21 deletions(-)
-
---- a/drivers/net/wireless/realtek/rtw88/usb.c
-+++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -546,11 +546,12 @@ static void rtw_usb_rx_handler(struct wo
- 	struct rtw_usb *rtwusb = container_of(work, struct rtw_usb, rx_work);
- 	struct rtw_dev *rtwdev = rtwusb->rtwdev;
- 	const struct rtw_chip_info *chip = rtwdev->chip;
--	struct rtw_rx_pkt_stat pkt_stat;
-+	u32 pkt_desc_sz = chip->rx_pkt_desc_sz;
- 	struct ieee80211_rx_status rx_status;
-+	u32 pkt_offset, next_pkt, urb_len;
-+	struct rtw_rx_pkt_stat pkt_stat;
-+	struct sk_buff *next_skb;
- 	struct sk_buff *skb;
--	u32 pkt_desc_sz = chip->rx_pkt_desc_sz;
--	u32 pkt_offset;
- 	u8 *rx_desc;
- 	int limit;
- 
-@@ -559,31 +560,48 @@ static void rtw_usb_rx_handler(struct wo
- 		if (!skb)
- 			break;
- 
--		rx_desc = skb->data;
--		chip->ops->query_rx_desc(rtwdev, rx_desc, &pkt_stat,
--					 &rx_status);
--		pkt_offset = pkt_desc_sz + pkt_stat.drv_info_sz +
--			     pkt_stat.shift;
--
--		if (pkt_stat.is_c2h) {
--			skb_put(skb, pkt_stat.pkt_len + pkt_offset);
--			rtw_fw_c2h_cmd_rx_irqsafe(rtwdev, pkt_offset, skb);
--			continue;
--		}
--
- 		if (skb_queue_len(&rtwusb->rx_queue) >= RTW_USB_MAX_RXQ_LEN) {
- 			dev_dbg_ratelimited(rtwdev->dev, "failed to get rx_queue, overflow\n");
- 			dev_kfree_skb_any(skb);
- 			continue;
- 		}
- 
--		skb_put(skb, pkt_stat.pkt_len);
--		skb_reserve(skb, pkt_offset);
-+		urb_len = skb->len;
-+
-+		do {
-+			rx_desc = skb->data;
-+			chip->ops->query_rx_desc(rtwdev, rx_desc, &pkt_stat,
-+						 &rx_status);
-+			pkt_offset = pkt_desc_sz + pkt_stat.drv_info_sz +
-+				     pkt_stat.shift;
-+
-+			next_pkt = round_up(pkt_stat.pkt_len + pkt_offset, 8);
-+
-+			if (urb_len >= next_pkt + pkt_desc_sz)
-+				next_skb = skb_clone(skb, GFP_KERNEL);
-+			else
-+				next_skb = NULL;
-+
-+			if (pkt_stat.is_c2h) {
-+				skb_trim(skb, pkt_stat.pkt_len + pkt_offset);
-+				rtw_fw_c2h_cmd_rx_irqsafe(rtwdev, pkt_offset, skb);
-+			} else {
-+				skb_pull(skb, pkt_offset);
-+				skb_trim(skb, pkt_stat.pkt_len);
-+				rtw_update_rx_freq_for_invalid(rtwdev, skb,
-+							       &rx_status,
-+							       &pkt_stat);
-+				rtw_rx_stats(rtwdev, pkt_stat.vif, skb);
-+				memcpy(skb->cb, &rx_status, sizeof(rx_status));
-+				ieee80211_rx_irqsafe(rtwdev->hw, skb);
-+			}
-+
-+			skb = next_skb;
-+			if (skb)
-+				skb_pull(skb, next_pkt);
- 
--		rtw_update_rx_freq_for_invalid(rtwdev, skb, &rx_status, &pkt_stat);
--		rtw_rx_stats(rtwdev, pkt_stat.vif, skb);
--		memcpy(skb->cb, &rx_status, sizeof(rx_status));
--		ieee80211_rx_irqsafe(rtwdev->hw, skb);
-+			urb_len -= next_pkt;
-+		} while (skb);
- 	}
- }
- 
-@@ -627,6 +645,7 @@ static void rtw_usb_read_port_complete(s
- 			if (skb)
- 				dev_kfree_skb_any(skb);
- 		} else {
-+			skb_put(skb, urb->actual_length);
- 			skb_queue_tail(&rtwusb->rx_queue, skb);
- 			queue_work(rtwusb->rxwq, &rtwusb->rx_work);
- 		}

package/kernel/mac80211/patches/rtl/013-v6.12-wifi-rtw88-Enable-USB-RX-aggregation-for-8822c-8822b.patch

@@ -1,168 +0,0 @@
-From 002a5db9a52a0e7af0fa9a450d31049748435748 Mon Sep 17 00:00:00 2001
-From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Date: Thu, 8 Aug 2024 01:23:06 +0300
-Subject: [PATCH] wifi: rtw88: Enable USB RX aggregation for 8822c/8822b/8821c
-
-Enable USB RX aggregation when there is at least 1 Mbps RX or TX
-traffic, otherwise disable it.
-
-USB RX aggregation improves the RX speed of RTL8811CU on certain ARM
-systems, like the NanoPi NEO Core2. Before: 28 Mbps, after: 231 Mbps.
-
-It also improves the RX speed of RTL8822CU on some x86_64 systems.
-Before: ~200 Mbps, after: ~300 Mbps.
-
-The official drivers for these chips use the same logic for SDIO, but
-for some reason the SDIO driver in rtw88 always enables RX aggregation,
-so this patch only toggles aggregation for USB devices.
-
-RTL8703B is likely not found in USB devices, and RTL8723DU doesn't like
-aggregation.
-
-Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
-Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
-Link: https://patch.msgid.link/b4c0d54c-6755-4b0f-9dd7-f9196fd74b68@gmail.com
----
- drivers/net/wireless/realtek/rtw88/hci.h  |  7 ++++
- drivers/net/wireless/realtek/rtw88/main.c | 13 +++++---
- drivers/net/wireless/realtek/rtw88/pci.c  |  1 +
- drivers/net/wireless/realtek/rtw88/sdio.c |  1 +
- drivers/net/wireless/realtek/rtw88/usb.c  | 40 +++++++++++++++++++++++
- 5 files changed, 58 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireless/realtek/rtw88/hci.h
-+++ b/drivers/net/wireless/realtek/rtw88/hci.h
-@@ -18,6 +18,7 @@ struct rtw_hci_ops {
- 	void (*deep_ps)(struct rtw_dev *rtwdev, bool enter);
- 	void (*link_ps)(struct rtw_dev *rtwdev, bool enter);
- 	void (*interface_cfg)(struct rtw_dev *rtwdev);
-+	void (*dynamic_rx_agg)(struct rtw_dev *rtwdev, bool enable);
- 
- 	int (*write_data_rsvd_page)(struct rtw_dev *rtwdev, u8 *buf, u32 size);
- 	int (*write_data_h2c)(struct rtw_dev *rtwdev, u8 *buf, u32 size);
-@@ -72,6 +73,12 @@ static inline void rtw_hci_interface_cfg
- 	rtwdev->hci.ops->interface_cfg(rtwdev);
- }
- 
-+static inline void rtw_hci_dynamic_rx_agg(struct rtw_dev *rtwdev, bool enable)
-+{
-+	if (rtwdev->hci.ops->dynamic_rx_agg)
-+		rtwdev->hci.ops->dynamic_rx_agg(rtwdev, enable);
-+}
-+
- static inline int
- rtw_hci_write_data_rsvd_page(struct rtw_dev *rtwdev, u8 *buf, u32 size)
- {
---- a/drivers/net/wireless/realtek/rtw88/main.c
-+++ b/drivers/net/wireless/realtek/rtw88/main.c
-@@ -212,6 +212,7 @@ static void rtw_watch_dog_work(struct wo
- 	struct rtw_traffic_stats *stats = &rtwdev->stats;
- 	struct rtw_watch_dog_iter_data data = {};
- 	bool busy_traffic = test_bit(RTW_FLAG_BUSY_TRAFFIC, rtwdev->flags);
-+	u32 tx_unicast_mbps, rx_unicast_mbps;
- 	bool ps_active;
- 
- 	mutex_lock(&rtwdev->mutex);
-@@ -236,10 +237,11 @@ static void rtw_watch_dog_work(struct wo
- 	else
- 		ps_active = false;
- 
--	ewma_tp_add(&stats->tx_ewma_tp,
--		    (u32)(stats->tx_unicast >> RTW_TP_SHIFT));
--	ewma_tp_add(&stats->rx_ewma_tp,
--		    (u32)(stats->rx_unicast >> RTW_TP_SHIFT));
-+	tx_unicast_mbps = stats->tx_unicast >> RTW_TP_SHIFT;
-+	rx_unicast_mbps = stats->rx_unicast >> RTW_TP_SHIFT;
-+
-+	ewma_tp_add(&stats->tx_ewma_tp, tx_unicast_mbps);
-+	ewma_tp_add(&stats->rx_ewma_tp, rx_unicast_mbps);
- 	stats->tx_throughput = ewma_tp_read(&stats->tx_ewma_tp);
- 	stats->rx_throughput = ewma_tp_read(&stats->rx_ewma_tp);
- 
-@@ -259,6 +261,9 @@ static void rtw_watch_dog_work(struct wo
- 
- 	rtw_phy_dynamic_mechanism(rtwdev);
- 
-+	rtw_hci_dynamic_rx_agg(rtwdev,
-+			       tx_unicast_mbps >= 1 || rx_unicast_mbps >= 1);
-+
- 	data.rtwdev = rtwdev;
- 	/* rtw_iterate_vifs internally uses an atomic iterator which is needed
- 	 * to avoid taking local->iflist_mtx mutex
---- a/drivers/net/wireless/realtek/rtw88/pci.c
-+++ b/drivers/net/wireless/realtek/rtw88/pci.c
-@@ -1601,6 +1601,7 @@ static struct rtw_hci_ops rtw_pci_ops =
- 	.deep_ps = rtw_pci_deep_ps,
- 	.link_ps = rtw_pci_link_ps,
- 	.interface_cfg = rtw_pci_interface_cfg,
-+	.dynamic_rx_agg = NULL,
- 
- 	.read8 = rtw_pci_read8,
- 	.read16 = rtw_pci_read16,
---- a/drivers/net/wireless/realtek/rtw88/sdio.c
-+++ b/drivers/net/wireless/realtek/rtw88/sdio.c
-@@ -1157,6 +1157,7 @@ static struct rtw_hci_ops rtw_sdio_ops =
- 	.deep_ps = rtw_sdio_deep_ps,
- 	.link_ps = rtw_sdio_link_ps,
- 	.interface_cfg = rtw_sdio_interface_cfg,
-+	.dynamic_rx_agg = NULL,
- 
- 	.read8 = rtw_sdio_read8,
- 	.read16 = rtw_sdio_read16,
---- a/drivers/net/wireless/realtek/rtw88/usb.c
-+++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -766,6 +766,45 @@ static void rtw_usb_interface_cfg(struct
- 	rtw_usb_init_burst_pkt_len(rtwdev);
- }
- 
-+static void rtw_usb_dynamic_rx_agg_v1(struct rtw_dev *rtwdev, bool enable)
-+{
-+	u8 size, timeout;
-+	u16 val16;
-+
-+	rtw_write32_set(rtwdev, REG_RXDMA_AGG_PG_TH, BIT_EN_PRE_CALC);
-+	rtw_write8_set(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_AGG_EN);
-+	rtw_write8_clr(rtwdev, REG_RXDMA_AGG_PG_TH + 3, BIT(7));
-+
-+	if (enable) {
-+		size = 0x5;
-+		timeout = 0x20;
-+	} else {
-+		size = 0x0;
-+		timeout = 0x1;
-+	}
-+	val16 = u16_encode_bits(size, BIT_RXDMA_AGG_PG_TH) |
-+		u16_encode_bits(timeout, BIT_DMA_AGG_TO_V1);
-+
-+	rtw_write16(rtwdev, REG_RXDMA_AGG_PG_TH, val16);
-+}
-+
-+static void rtw_usb_dynamic_rx_agg(struct rtw_dev *rtwdev, bool enable)
-+{
-+	switch (rtwdev->chip->id) {
-+	case RTW_CHIP_TYPE_8822C:
-+	case RTW_CHIP_TYPE_8822B:
-+	case RTW_CHIP_TYPE_8821C:
-+		rtw_usb_dynamic_rx_agg_v1(rtwdev, enable);
-+		break;
-+	case RTW_CHIP_TYPE_8723D:
-+		/* Doesn't like aggregation. */
-+		break;
-+	case RTW_CHIP_TYPE_8703B:
-+		/* Likely not found in USB devices. */
-+		break;
-+	}
-+}
-+
- static struct rtw_hci_ops rtw_usb_ops = {
- 	.tx_write = rtw_usb_tx_write,
- 	.tx_kick_off = rtw_usb_tx_kick_off,
-@@ -775,6 +814,7 @@ static struct rtw_hci_ops rtw_usb_ops =
- 	.deep_ps = rtw_usb_deep_ps,
- 	.link_ps = rtw_usb_link_ps,
- 	.interface_cfg = rtw_usb_interface_cfg,
-+	.dynamic_rx_agg = rtw_usb_dynamic_rx_agg,
- 
- 	.write8  = rtw_usb_write8,
- 	.write16 = rtw_usb_write16,

package/kernel/mac80211/patches/rtl/016-v6.12-wifi-rtw88-assign-mac_id-for-vif-sta-and-update-to-T.patch

@@ -1,231 +0,0 @@
-From 902cb7b11f9a7ff07233cc4c626b54c3e4703149 Mon Sep 17 00:00:00 2001
-From: Ping-Ke Shih <pkshih@realtek.com>
-Date: Mon, 19 Aug 2024 10:52:48 +0800
-Subject: [PATCH] wifi: rtw88: assign mac_id for vif/sta and update to TX desc
-
-A mac_id as an instance in firmware has to be assigned for each station
-including AP and connected stations. Firmware will use the mac_id to
-control TX rate and do statistics.
-
-Assignment rule is to assign mac_id to each vif when adding vif.
-For station mode, sta->mac_id will reuse vif->mac_id. For AP mode,
-dynamically allocate an sta->mac_id to a station, and vif->mac_id is
-used to send broadcast/multicast packets which are not belong to
-a station. For example,
-
-                  vif->mac_id      sta->mac_id
-vif0 (STA mode)        0               0
-vif1 (AP mode)         1               2...
-
-By the way, remove unused RTW_BC_MC_MACID, which was planed to send
-broadcast/multicast packets on fixed mac_id.
-
-Tested-on RTL8822CE with STA + AP SCC mode.
-
-Link: https://lore.kernel.org/linux-wireless/e4be0a75-43b2-4ae5-9aab-5c4a88e78097@gmail.com/
-Cc: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
-Link: https://patch.msgid.link/20240819025248.17939-1-pkshih@realtek.com
----
- drivers/net/wireless/realtek/rtw88/mac80211.c | 13 ++++++--
- drivers/net/wireless/realtek/rtw88/main.c     | 30 ++++++++-----------
- drivers/net/wireless/realtek/rtw88/main.h     | 14 +++++++--
- drivers/net/wireless/realtek/rtw88/tx.c       | 11 +++++--
- drivers/net/wireless/realtek/rtw88/tx.h       |  1 +
- 5 files changed, 44 insertions(+), 25 deletions(-)
-
---- a/drivers/net/wireless/realtek/rtw88/mac80211.c
-+++ b/drivers/net/wireless/realtek/rtw88/mac80211.c
-@@ -167,6 +167,12 @@ static int rtw_ops_add_interface(struct
- 
- 	mutex_lock(&rtwdev->mutex);
- 
-+	rtwvif->mac_id = rtw_acquire_macid(rtwdev);
-+	if (rtwvif->mac_id >= RTW_MAX_MAC_ID_NUM) {
-+		mutex_unlock(&rtwdev->mutex);
-+		return -ENOSPC;
-+	}
-+
- 	port = find_first_zero_bit(rtwdev->hw_port, RTW_PORT_NUM);
- 	if (port >= RTW_PORT_NUM) {
- 		mutex_unlock(&rtwdev->mutex);
-@@ -214,7 +220,8 @@ static int rtw_ops_add_interface(struct
- 
- 	mutex_unlock(&rtwdev->mutex);
- 
--	rtw_dbg(rtwdev, RTW_DBG_STATE, "start vif %pM on port %d\n", vif->addr, rtwvif->port);
-+	rtw_dbg(rtwdev, RTW_DBG_STATE, "start vif %pM mac_id %d on port %d\n",
-+		vif->addr, rtwvif->mac_id, rtwvif->port);
- 	return 0;
- }
- 
-@@ -225,7 +232,8 @@ static void rtw_ops_remove_interface(str
- 	struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
- 	u32 config = 0;
- 
--	rtw_dbg(rtwdev, RTW_DBG_STATE, "stop vif %pM on port %d\n", vif->addr, rtwvif->port);
-+	rtw_dbg(rtwdev, RTW_DBG_STATE, "stop vif %pM mac_id %d on port %d\n",
-+		vif->addr, rtwvif->mac_id, rtwvif->port);
- 
- 	mutex_lock(&rtwdev->mutex);
- 
-@@ -242,6 +250,7 @@ static void rtw_ops_remove_interface(str
- 	config |= PORT_SET_BCN_CTRL;
- 	rtw_vif_port_config(rtwdev, rtwvif, config);
- 	clear_bit(rtwvif->port, rtwdev->hw_port);
-+	rtw_release_macid(rtwdev, rtwvif->mac_id);
- 	rtw_recalc_lps(rtwdev, NULL);
- 
- 	mutex_unlock(&rtwdev->mutex);
---- a/drivers/net/wireless/realtek/rtw88/main.c
-+++ b/drivers/net/wireless/realtek/rtw88/main.c
-@@ -311,17 +311,6 @@ static void rtw_ips_work(struct work_str
- 	mutex_unlock(&rtwdev->mutex);
- }
- 
--static u8 rtw_acquire_macid(struct rtw_dev *rtwdev)
--{
--	unsigned long mac_id;
--
--	mac_id = find_first_zero_bit(rtwdev->mac_id_map, RTW_MAX_MAC_ID_NUM);
--	if (mac_id < RTW_MAX_MAC_ID_NUM)
--		set_bit(mac_id, rtwdev->mac_id_map);
--
--	return mac_id;
--}
--
- static void rtw_sta_rc_work(struct work_struct *work)
- {
- 	struct rtw_sta_info *si = container_of(work, struct rtw_sta_info,
-@@ -340,12 +329,14 @@ int rtw_sta_add(struct rtw_dev *rtwdev,
- 	struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
- 	int i;
- 
--	si->mac_id = rtw_acquire_macid(rtwdev);
--	if (si->mac_id >= RTW_MAX_MAC_ID_NUM)
--		return -ENOSPC;
-+	if (vif->type == NL80211_IFTYPE_STATION) {
-+		si->mac_id = rtwvif->mac_id;
-+	} else {
-+		si->mac_id = rtw_acquire_macid(rtwdev);
-+		if (si->mac_id >= RTW_MAX_MAC_ID_NUM)
-+			return -ENOSPC;
-+	}
- 
--	if (vif->type == NL80211_IFTYPE_STATION && vif->cfg.assoc == 0)
--		rtwvif->mac_id = si->mac_id;
- 	si->rtwdev = rtwdev;
- 	si->sta = sta;
- 	si->vif = vif;
-@@ -370,11 +361,13 @@ void rtw_sta_remove(struct rtw_dev *rtwd
- 		    bool fw_exist)
- {
- 	struct rtw_sta_info *si = (struct rtw_sta_info *)sta->drv_priv;
-+	struct ieee80211_vif *vif = si->vif;
- 	int i;
- 
- 	cancel_work_sync(&si->rc_work);
- 
--	rtw_release_macid(rtwdev, si->mac_id);
-+	if (vif->type != NL80211_IFTYPE_STATION)
-+		rtw_release_macid(rtwdev, si->mac_id);
- 	if (fw_exist)
- 		rtw_fw_media_status_report(rtwdev, si->mac_id, false);
- 
-@@ -614,6 +607,8 @@ static void rtw_reset_vif_iter(void *dat
- 	rtw_bf_disassoc(rtwdev, vif, NULL);
- 	rtw_vif_assoc_changed(rtwvif, NULL);
- 	rtw_txq_cleanup(rtwdev, vif->txq);
-+
-+	rtw_release_macid(rtwdev, rtwvif->mac_id);
- }
- 
- void rtw_fw_recovery(struct rtw_dev *rtwdev)
-@@ -2139,7 +2134,6 @@ int rtw_core_init(struct rtw_dev *rtwdev
- 	rtwdev->sec.total_cam_num = 32;
- 	rtwdev->hal.current_channel = 1;
- 	rtwdev->dm_info.fix_rate = U8_MAX;
--	set_bit(RTW_BC_MC_MACID, rtwdev->mac_id_map);
- 
- 	rtw_stats_init(rtwdev);
- 
---- a/drivers/net/wireless/realtek/rtw88/main.h
-+++ b/drivers/net/wireless/realtek/rtw88/main.h
-@@ -742,7 +742,6 @@ struct rtw_txq {
- 	unsigned long flags;
- };
- 
--#define RTW_BC_MC_MACID 1
- DECLARE_EWMA(rssi, 10, 16);
- 
- struct rtw_sta_info {
-@@ -805,7 +804,7 @@ struct rtw_bf_info {
- struct rtw_vif {
- 	enum rtw_net_type net_type;
- 	u16 aid;
--	u8 mac_id; /* for STA mode only */
-+	u8 mac_id;
- 	u8 mac_addr[ETH_ALEN];
- 	u8 bssid[ETH_ALEN];
- 	u8 port;
-@@ -2131,6 +2130,17 @@ static inline bool rtw_chip_has_tx_stbc(
- 	return rtwdev->chip->tx_stbc;
- }
- 
-+static inline u8 rtw_acquire_macid(struct rtw_dev *rtwdev)
-+{
-+	unsigned long mac_id;
-+
-+	mac_id = find_first_zero_bit(rtwdev->mac_id_map, RTW_MAX_MAC_ID_NUM);
-+	if (mac_id < RTW_MAX_MAC_ID_NUM)
-+		set_bit(mac_id, rtwdev->mac_id_map);
-+
-+	return mac_id;
-+}
-+
- static inline void rtw_release_macid(struct rtw_dev *rtwdev, u8 mac_id)
- {
- 	clear_bit(mac_id, rtwdev->mac_id_map);
---- a/drivers/net/wireless/realtek/rtw88/tx.c
-+++ b/drivers/net/wireless/realtek/rtw88/tx.c
-@@ -46,7 +46,8 @@ void rtw_tx_fill_tx_desc(struct rtw_tx_p
- 		      le32_encode_bits(pkt_info->ls, RTW_TX_DESC_W0_LS) |
- 		      le32_encode_bits(pkt_info->dis_qselseq, RTW_TX_DESC_W0_DISQSELSEQ);
- 
--	tx_desc->w1 = le32_encode_bits(pkt_info->qsel, RTW_TX_DESC_W1_QSEL) |
-+	tx_desc->w1 = le32_encode_bits(pkt_info->mac_id, RTW_TX_DESC_W1_MACID) |
-+		      le32_encode_bits(pkt_info->qsel, RTW_TX_DESC_W1_QSEL) |
- 		      le32_encode_bits(pkt_info->rate_id, RTW_TX_DESC_W1_RATE_ID) |
- 		      le32_encode_bits(pkt_info->sec_type, RTW_TX_DESC_W1_SEC_TYPE) |
- 		      le32_encode_bits(pkt_info->pkt_offset, RTW_TX_DESC_W1_PKT_OFFSET) |
-@@ -401,14 +402,18 @@ void rtw_tx_pkt_info_update(struct rtw_d
- 	const struct rtw_chip_info *chip = rtwdev->chip;
- 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-+	struct ieee80211_vif *vif = info->control.vif;
- 	struct rtw_sta_info *si;
--	struct ieee80211_vif *vif = NULL;
-+	struct rtw_vif *rtwvif;
- 	__le16 fc = hdr->frame_control;
- 	bool bmc;
- 
- 	if (sta) {
- 		si = (struct rtw_sta_info *)sta->drv_priv;
--		vif = si->vif;
-+		pkt_info->mac_id = si->mac_id;
-+	} else if (vif) {
-+		rtwvif = (struct rtw_vif *)vif->drv_priv;
-+		pkt_info->mac_id = rtwvif->mac_id;
- 	}
- 
- 	if (ieee80211_is_mgmt(fc) || ieee80211_is_nullfunc(fc))
---- a/drivers/net/wireless/realtek/rtw88/tx.h
-+++ b/drivers/net/wireless/realtek/rtw88/tx.h
-@@ -27,6 +27,7 @@ struct rtw_tx_desc {
- #define RTW_TX_DESC_W0_BMC BIT(24)
- #define RTW_TX_DESC_W0_LS BIT(26)
- #define RTW_TX_DESC_W0_DISQSELSEQ BIT(31)
-+#define RTW_TX_DESC_W1_MACID GENMASK(7, 0)
- #define RTW_TX_DESC_W1_QSEL GENMASK(12, 8)
- #define RTW_TX_DESC_W1_RATE_ID GENMASK(20, 16)
- #define RTW_TX_DESC_W1_SEC_TYPE GENMASK(23, 22)

package/kernel/mac80211/patches/rtl/019-v6.13-wifi-rtw88-Parse-the-RX-descriptor-with-a-single-fun.patch

@@ -547,7 +547,7 @@ Link: https://patch.msgid.link/913f1747-38fc-4409-85a4-57bb9cee506b@gmail.com
  
 --- a/drivers/net/wireless/realtek/rtw88/usb.c
 +++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -570,8 +570,8 @@ static void rtw_usb_rx_handler(struct wo
+@@ -571,8 +571,8 @@ static void rtw_usb_rx_handler(struct wo
  
  		do {
  			rx_desc = skb->data;

package/kernel/mac80211/patches/rtl/020-v6.12-wifi-rtw88-Fix-the-RX-aggregation-in-USB-3-mode.patch

@@ -1,70 +0,0 @@
-From 4aefde403da7af30757915e0462d88398c9388c5 Mon Sep 17 00:00:00 2001
-From: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Date: Tue, 8 Oct 2024 21:44:02 +0300
-Subject: [PATCH] wifi: rtw88: Fix the RX aggregation in USB 3 mode
-
-RTL8822CU, RTL8822BU, and RTL8821CU don't need BIT_EN_PRE_CALC.
-In fact, RTL8822BU in USB 3 mode doesn't pass all the frames to the
-driver, resulting in much lower download speed than normal:
-
-$ iperf3 -c 192.168.0.1 -R
-Connecting to host 192.168.0.1, port 5201
-Reverse mode, remote host 192.168.0.1 is sending
-[  5] local 192.168.0.50 port 43062 connected to 192.168.0.1 port 5201
-[ ID] Interval           Transfer     Bitrate
-[  5]   0.00-1.00   sec  26.9 MBytes   225 Mbits/sec
-[  5]   1.00-2.00   sec  7.50 MBytes  62.9 Mbits/sec
-[  5]   2.00-3.00   sec  8.50 MBytes  71.3 Mbits/sec
-[  5]   3.00-4.00   sec  8.38 MBytes  70.3 Mbits/sec
-[  5]   4.00-5.00   sec  7.75 MBytes  65.0 Mbits/sec
-[  5]   5.00-6.00   sec  8.00 MBytes  67.1 Mbits/sec
-[  5]   6.00-7.00   sec  8.00 MBytes  67.1 Mbits/sec
-[  5]   7.00-8.00   sec  7.75 MBytes  65.0 Mbits/sec
-[  5]   8.00-9.00   sec  7.88 MBytes  66.1 Mbits/sec
-[  5]   9.00-10.00  sec  7.88 MBytes  66.1 Mbits/sec
-- - - - - - - - - - - - - - - - - - - - - - - - -
-[ ID] Interval           Transfer     Bitrate         Retr
-[  5]   0.00-10.02  sec   102 MBytes  85.1 Mbits/sec  224             sender
-[  5]   0.00-10.00  sec  98.6 MBytes  82.7 Mbits/sec                  receiver
-
-Don't set BIT_EN_PRE_CALC. Then the speed is much better:
-
-% iperf3 -c 192.168.0.1 -R
-Connecting to host 192.168.0.1, port 5201
-Reverse mode, remote host 192.168.0.1 is sending
-[  5] local 192.168.0.50 port 39000 connected to 192.168.0.1 port 5201
-[ ID] Interval           Transfer     Bitrate
-[  5]   0.00-1.00   sec  52.8 MBytes   442 Mbits/sec
-[  5]   1.00-2.00   sec  71.9 MBytes   603 Mbits/sec
-[  5]   2.00-3.00   sec  74.8 MBytes   627 Mbits/sec
-[  5]   3.00-4.00   sec  75.9 MBytes   636 Mbits/sec
-[  5]   4.00-5.00   sec  76.0 MBytes   638 Mbits/sec
-[  5]   5.00-6.00   sec  74.1 MBytes   622 Mbits/sec
-[  5]   6.00-7.00   sec  74.0 MBytes   621 Mbits/sec
-[  5]   7.00-8.00   sec  76.0 MBytes   638 Mbits/sec
-[  5]   8.00-9.00   sec  74.4 MBytes   624 Mbits/sec
-[  5]   9.00-10.00  sec  63.9 MBytes   536 Mbits/sec
-- - - - - - - - - - - - - - - - - - - - - - - - -
-[ ID] Interval           Transfer     Bitrate         Retr
-[  5]   0.00-10.00  sec   717 MBytes   601 Mbits/sec   24             sender
-[  5]   0.00-10.00  sec   714 MBytes   599 Mbits/sec                  receiver
-
-Fixes: 002a5db9a52a ("wifi: rtw88: Enable USB RX aggregation for 8822c/8822b/8821c")
-Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
-Acked-by: Ping-Ke Shih <pkshih@realtek.com>
-Signed-off-by: Kalle Valo <kvalo@kernel.org>
-Link: https://patch.msgid.link/afb94a82-3d18-459e-97fc-1a217608cdf0@gmail.com
----
- drivers/net/wireless/realtek/rtw88/usb.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/net/wireless/realtek/rtw88/usb.c
-+++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -771,7 +771,6 @@ static void rtw_usb_dynamic_rx_agg_v1(st
- 	u8 size, timeout;
- 	u16 val16;
- 
--	rtw_write32_set(rtwdev, REG_RXDMA_AGG_PG_TH, BIT_EN_PRE_CALC);
- 	rtw_write8_set(rtwdev, REG_TXDMA_PQ_MAP, BIT_RXDMA_AGG_EN);
- 	rtw_write8_clr(rtwdev, REG_RXDMA_AGG_PG_TH + 3, BIT(7));
- 

package/kernel/mac80211/patches/rtl/030-v6.13-wifi-rtw88-Enable-data-rate-fallback-for-older-chips.patch

@@ -174,7 +174,7 @@ Link: https://patch.msgid.link/2b3e3e6f-541b-4a3b-8ca3-65b267e6a95a@gmail.com
  void rtw_tx_rsvd_page_pkt_info_update(struct rtw_dev *rtwdev,
 --- a/drivers/net/wireless/realtek/rtw88/usb.c
 +++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -457,7 +457,7 @@ static int rtw_usb_write_data(struct rtw
+@@ -458,7 +458,7 @@ static int rtw_usb_write_data(struct rtw
  	skb_put_data(skb, buf, size);
  	skb_push(skb, chip->tx_pkt_desc_sz);
  	memset(skb->data, 0, chip->tx_pkt_desc_sz);
@@ -183,7 +183,7 @@ Link: https://patch.msgid.link/2b3e3e6f-541b-4a3b-8ca3-65b267e6a95a@gmail.com
  	rtw_tx_fill_txdesc_checksum(rtwdev, pkt_info, skb->data);
  
  	ret = rtw_usb_write_port(rtwdev, qsel, skb,
-@@ -524,7 +524,7 @@ static int rtw_usb_tx_write(struct rtw_d
+@@ -525,7 +525,7 @@ static int rtw_usb_tx_write(struct rtw_d
  	pkt_desc = skb_push(skb, chip->tx_pkt_desc_sz);
  	memset(pkt_desc, 0, chip->tx_pkt_desc_sz);
  	ep = qsel_to_ep(rtwusb, pkt_info->qsel);

package/kernel/mac80211/patches/rtl/034-v6.13-wifi-rtw88-usb-Set-pkt_info.ls-for-the-reserved-page.patch

@@ -17,7 +17,7 @@ Link: https://patch.msgid.link/e443f5d9-4b53-4f64-985c-64313ec80bef@gmail.com
 
 --- a/drivers/net/wireless/realtek/rtw88/usb.c
 +++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -477,6 +477,7 @@ static int rtw_usb_write_data_rsvd_page(
+@@ -478,6 +478,7 @@ static int rtw_usb_write_data_rsvd_page(
  	pkt_info.tx_pkt_size = size;
  	pkt_info.qsel = TX_DESC_QSEL_BEACON;
  	pkt_info.offset = chip->tx_pkt_desc_sz;

package/kernel/mac80211/patches/rtl/048-wifi-rtw88-usb-Support-USB-3-with-RTL8812AU.patch

@@ -12,7 +12,7 @@ Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
 
 --- a/drivers/net/wireless/realtek/rtw88/usb.c
 +++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -929,6 +929,32 @@ static void rtw_usb_intf_deinit(struct r
+@@ -930,6 +930,32 @@ static void rtw_usb_intf_deinit(struct r
  	usb_set_intfdata(intf, NULL);
  }
  
@@ -45,7 +45,7 @@ Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
  static int rtw_usb_switch_mode_new(struct rtw_dev *rtwdev)
  {
  	enum usb_device_speed cur_speed;
-@@ -982,7 +1008,8 @@ static int rtw_usb_switch_mode(struct rt
+@@ -983,7 +1009,8 @@ static int rtw_usb_switch_mode(struct rt
  {
  	u8 id = rtwdev->chip->id;
  
@@ -55,7 +55,7 @@ Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
  		return 0;
  
  	if (!rtwdev->efuse.usb_mode_switch) {
-@@ -997,7 +1024,10 @@ static int rtw_usb_switch_mode(struct rt
+@@ -998,7 +1025,10 @@ static int rtw_usb_switch_mode(struct rt
  		return 0;
  	}
  

package/kernel/mac80211/patches/rtl/049-wifi-rtw88-usb-Enable-RX-aggregation-for-8821au-8812.patch

@@ -19,7 +19,7 @@ Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
 
 --- a/drivers/net/wireless/realtek/rtw88/usb.c
 +++ b/drivers/net/wireless/realtek/rtw88/usb.c
-@@ -788,6 +788,32 @@ static void rtw_usb_dynamic_rx_agg_v1(st
+@@ -789,6 +789,32 @@ static void rtw_usb_dynamic_rx_agg_v1(st
  	rtw_write16(rtwdev, REG_RXDMA_AGG_PG_TH, val16);
  }
  
@@ -52,7 +52,7 @@ Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
  static void rtw_usb_dynamic_rx_agg(struct rtw_dev *rtwdev, bool enable)
  {
  	switch (rtwdev->chip->id) {
-@@ -796,6 +822,10 @@ static void rtw_usb_dynamic_rx_agg(struc
+@@ -797,6 +823,10 @@ static void rtw_usb_dynamic_rx_agg(struc
  	case RTW_CHIP_TYPE_8821C:
  		rtw_usb_dynamic_rx_agg_v1(rtwdev, enable);
  		break;

package/kernel/mac80211/patches/subsys/130-disable_auto_vif.patch

@@ -1,6 +1,6 @@
 --- a/net/mac80211/main.c
 +++ b/net/mac80211/main.c
-@@ -1581,24 +1581,6 @@ int ieee80211_register_hw(struct ieee802
+@@ -1583,24 +1583,6 @@ int ieee80211_register_hw(struct ieee802
  
  	ieee80211_check_wbrf_support(local);
  

package/kernel/mac80211/patches/subsys/220-allow-ibss-mixed.patch

@@ -16,7 +16,7 @@ and we should ignore this.
 
 --- a/net/wireless/core.c
 +++ b/net/wireless/core.c
-@@ -654,21 +654,6 @@ static int wiphy_verify_combinations(str
+@@ -678,21 +678,6 @@ int wiphy_verify_iface_combinations(stru
  				    c->limits[j].max > 1))
  				return -EINVAL;
  

package/kernel/mac80211/patches/subsys/310-cfg80211-allow-grace-period-for-DFS-available-after-.patch

@@ -113,7 +113,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  {
 --- a/net/wireless/core.h
 +++ b/net/wireless/core.h
-@@ -467,6 +467,8 @@ void cfg80211_set_dfs_state(struct wiphy
+@@ -475,6 +475,8 @@ void cfg80211_set_dfs_state(struct wiphy
  			    enum nl80211_dfs_state dfs_state);
  
  void cfg80211_dfs_channels_update_work(struct work_struct *work);
@@ -124,7 +124,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
 --- a/net/wireless/mlme.c
 +++ b/net/wireless/mlme.c
-@@ -1037,6 +1037,8 @@ void cfg80211_dfs_channels_update_work(s
+@@ -1031,6 +1031,8 @@ void cfg80211_dfs_channels_update_work(s
  			if (c->dfs_state == NL80211_DFS_UNAVAILABLE) {
  				time_dfs_update = IEEE80211_DFS_MIN_NOP_TIME_MS;
  				radar_event = NL80211_RADAR_NOP_FINISHED;
@@ -133,7 +133,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  			} else {
  				if (regulatory_pre_cac_allowed(wiphy) ||
  				    cfg80211_any_wiphy_oper_chan(wiphy, c))
-@@ -1044,11 +1046,10 @@ void cfg80211_dfs_channels_update_work(s
+@@ -1038,11 +1040,10 @@ void cfg80211_dfs_channels_update_work(s
  
  				time_dfs_update = REG_PRE_CAC_EXPIRY_GRACE_MS;
  				radar_event = NL80211_RADAR_PRE_CAC_EXPIRED;

package/kernel/mac80211/patches/subsys/320-mac80211-add-AQL-support-for-broadcast-packets.patch

@@ -85,7 +85,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	const struct ieee80211_ops *ops;
 --- a/net/mac80211/main.c
 +++ b/net/mac80211/main.c
-@@ -952,6 +952,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
+@@ -954,6 +954,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
  	spin_lock_init(&local->rx_path_lock);
  	spin_lock_init(&local->queue_stop_reason_lock);
  

package/kernel/mac80211/patches/subsys/321-wifi-mac80211-do-not-pass-a-stopped-vif-to-the-drive.patch

@@ -1,24 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 2 Oct 2024 11:45:35 +0200
-Subject: [PATCH] wifi: mac80211: do not pass a stopped vif to the driver in
- .get_txpower
-
-Avoid potentially crashing in the driver because of uninitialized private data
-
-Fixes: 5b3dc42b1b0d ("mac80211: add support for driver tx power reporting")
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -3134,7 +3134,8 @@ static int ieee80211_get_tx_power(struct
- 	struct ieee80211_local *local = wiphy_priv(wiphy);
- 	struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
- 
--	if (local->ops->get_txpower)
-+	if (local->ops->get_txpower &&
-+	    (sdata->flags & IEEE80211_SDATA_IN_DRIVER))
- 		return drv_get_txpower(local, sdata, dbm);
- 
- 	if (local->emulate_chanctx)

package/kernel/mac80211/patches/subsys/330-wifi-cfg80211-add-option-for-vif-allowed-radios.patch

@@ -23,15 +23,15 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/include/net/cfg80211.h
 +++ b/include/net/cfg80211.h
-@@ -6227,6 +6227,7 @@ enum ieee80211_ap_reg_power {
+@@ -6271,6 +6271,7 @@ enum ieee80211_ap_reg_power {
   *	entered.
-  * @links[].cac_time_ms: CAC time in ms
+  * @links.cac_time_ms: CAC time in ms
   * @valid_links: bitmap describing what elements of @links are valid
 + * @radio_mask: Bitmask of radios that this interface is allowed to operate on.
   */
  struct wireless_dev {
  	struct wiphy *wiphy;
-@@ -6339,6 +6340,8 @@ struct wireless_dev {
+@@ -6383,6 +6384,8 @@ struct wireless_dev {
  		unsigned int cac_time_ms;
  	} links[IEEE80211_MLD_MAX_NUM_LINKS];
  	u16 valid_links;
@@ -40,7 +40,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  };
  
  static inline const u8 *wdev_address(struct wireless_dev *wdev)
-@@ -6525,6 +6528,17 @@ bool cfg80211_radio_chandef_valid(const
+@@ -6569,6 +6572,17 @@ bool cfg80211_radio_chandef_valid(const
  				  const struct cfg80211_chan_def *chandef);
  
  /**
@@ -246,7 +246,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  			continue;
  
  		for (i = 0; i < rdev_req->n_channels; i++) {
-@@ -3490,9 +3491,12 @@ int cfg80211_wext_siwscan(struct net_dev
+@@ -3519,9 +3520,12 @@ int cfg80211_wext_siwscan(struct net_dev
  			continue;
  
  		for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
@@ -298,7 +298,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 +EXPORT_SYMBOL(cfg80211_wdev_channel_allowed);
 --- a/net/wireless/core.c
 +++ b/net/wireless/core.c
-@@ -1415,6 +1415,8 @@ void cfg80211_init_wdev(struct wireless_
+@@ -1424,6 +1424,8 @@ void cfg80211_init_wdev(struct wireless_
  	/* allow mac80211 to determine the timeout */
  	wdev->ps_timeout = -1;
  

package/kernel/mac80211/patches/subsys/330-wifi-mac80211-introduce-EHT-rate-support-in-AQL-airt.patch

@@ -1,233 +0,0 @@
-From: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
-Date: Wed, 4 Sep 2024 19:12:56 +0800
-Subject: [PATCH] wifi: mac80211: introduce EHT rate support in AQL airtime
-
-Add definitions related to EHT mode and airtime calculation
-according to the 802.11BE_D4.0.
-
-Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
-Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
-Signed-off-by: Deren Wu <deren.wu@mediatek.com>
-Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
-Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
-Link: https://patch.msgid.link/20240904111256.11734-1-mingyen.hsieh@mediatek.com
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/airtime.c
-+++ b/net/mac80211/airtime.c
-@@ -55,10 +55,21 @@
- #define HE_DURATION_S(shift, streams, gi, bps)		\
- 	(HE_DURATION(streams, gi, bps) >> shift)
- 
-+/* gi in HE/EHT is identical. It matches enum nl80211_eht_gi as well */
-+#define EHT_GI_08 HE_GI_08
-+#define EHT_GI_16 HE_GI_16
-+#define EHT_GI_32 HE_GI_32
-+
-+#define EHT_DURATION(streams, gi, bps)			\
-+	HE_DURATION(streams, gi, bps)
-+#define EHT_DURATION_S(shift, streams, gi, bps)		\
-+	HE_DURATION_S(shift, streams, gi, bps)
-+
- #define BW_20			0
- #define BW_40			1
- #define BW_80			2
- #define BW_160			3
-+#define BW_320			4
- 
- /*
-  * Define group sort order: HT40 -> SGI -> #streams
-@@ -68,17 +79,26 @@
- #define IEEE80211_VHT_STREAM_GROUPS	8 /* BW(=4) * SGI(=2) */
- 
- #define IEEE80211_HE_MAX_STREAMS	8
-+#define IEEE80211_HE_STREAM_GROUPS	12 /* BW(=4) * GI(=3) */
-+
-+#define IEEE80211_EHT_MAX_STREAMS	8
-+#define IEEE80211_EHT_STREAM_GROUPS	15 /* BW(=5) * GI(=3) */
- 
- #define IEEE80211_HT_GROUPS_NB	(IEEE80211_MAX_STREAMS *	\
- 				 IEEE80211_HT_STREAM_GROUPS)
- #define IEEE80211_VHT_GROUPS_NB	(IEEE80211_MAX_STREAMS *	\
- 					 IEEE80211_VHT_STREAM_GROUPS)
-+#define IEEE80211_HE_GROUPS_NB	(IEEE80211_HE_MAX_STREAMS *	\
-+				 IEEE80211_HE_STREAM_GROUPS)
-+#define IEEE80211_EHT_GROUPS_NB	(IEEE80211_EHT_MAX_STREAMS *	\
-+				 IEEE80211_EHT_STREAM_GROUPS)
- 
- #define IEEE80211_HT_GROUP_0	0
- #define IEEE80211_VHT_GROUP_0	(IEEE80211_HT_GROUP_0 + IEEE80211_HT_GROUPS_NB)
- #define IEEE80211_HE_GROUP_0	(IEEE80211_VHT_GROUP_0 + IEEE80211_VHT_GROUPS_NB)
-+#define IEEE80211_EHT_GROUP_0	(IEEE80211_HE_GROUP_0 + IEEE80211_HE_GROUPS_NB)
- 
--#define MCS_GROUP_RATES		12
-+#define MCS_GROUP_RATES		14
- 
- #define HT_GROUP_IDX(_streams, _sgi, _ht40)	\
- 	IEEE80211_HT_GROUP_0 +			\
-@@ -203,6 +223,69 @@
- #define HE_GROUP(_streams, _gi, _bw)					\
- 	__HE_GROUP(_streams, _gi, _bw,				\
- 		   HE_GROUP_SHIFT(_streams, _gi, _bw))
-+
-+#define EHT_BW2VBPS(_bw, r5, r4, r3, r2, r1)					\
-+	((_bw) == BW_320 ? r5 : BW2VBPS(_bw, r4, r3, r2, r1))
-+
-+#define EHT_GROUP_IDX(_streams, _gi, _bw)				\
-+	(IEEE80211_EHT_GROUP_0 +					\
-+	 IEEE80211_EHT_MAX_STREAMS * 3 * (_bw) +			\
-+	 IEEE80211_EHT_MAX_STREAMS * (_gi) +				\
-+	 (_streams) - 1)
-+
-+#define __EHT_GROUP(_streams, _gi, _bw, _s)						\
-+	[EHT_GROUP_IDX(_streams, _gi, _bw)] = {						\
-+	.shift = _s,									\
-+	.duration = {									\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw,  1960,   980,  490,  234,  117)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw,  3920,  1960,  980,  468,  234)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw,  5880,  2937, 1470,  702,  351)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw,  7840,  3920, 1960,  936,  468)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw, 11760,  5880, 2940, 1404,  702)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw, 15680,  7840, 3920, 1872,  936)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw, 17640,  8820, 4410, 2106, 1053)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw, 19600,  9800, 4900, 2340, 1170)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw, 23520, 11760, 5880, 2808, 1404)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw, 26133, 13066, 6533, 3120, 1560)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw, 29400, 14700, 7350, 3510, 1755)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw, 32666, 16333, 8166, 3900, 1950)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw, 35280, 17640, 8820, 4212, 2106)),	\
-+		EHT_DURATION_S(_s, _streams, _gi,					\
-+			       EHT_BW2VBPS(_bw, 39200, 19600, 9800, 4680, 2340))	\
-+		}									\
-+}
-+
-+#define EHT_GROUP_SHIFT(_streams, _gi, _bw)						\
-+	GROUP_SHIFT(EHT_DURATION(_streams, _gi,						\
-+				 EHT_BW2VBPS(_bw, 1960, 980, 490, 234, 117)))
-+
-+#define EHT_GROUP(_streams, _gi, _bw)					\
-+	__EHT_GROUP(_streams, _gi, _bw,				\
-+		   EHT_GROUP_SHIFT(_streams, _gi, _bw))
-+
-+#define EHT_GROUP_RANGE(_gi, _bw)	\
-+	EHT_GROUP(1, _gi, _bw),		\
-+	EHT_GROUP(2, _gi, _bw),		\
-+	EHT_GROUP(3, _gi, _bw),		\
-+	EHT_GROUP(4, _gi, _bw),		\
-+	EHT_GROUP(5, _gi, _bw),		\
-+	EHT_GROUP(6, _gi, _bw),		\
-+	EHT_GROUP(7, _gi, _bw),		\
-+	EHT_GROUP(8, _gi, _bw)
-+
- struct mcs_group {
- 	u8 shift;
- 	u16 duration[MCS_GROUP_RATES];
-@@ -376,6 +459,26 @@ static const struct mcs_group airtime_mc
- 	HE_GROUP(6, HE_GI_32, BW_160),
- 	HE_GROUP(7, HE_GI_32, BW_160),
- 	HE_GROUP(8, HE_GI_32, BW_160),
-+
-+	EHT_GROUP_RANGE(EHT_GI_08, BW_20),
-+	EHT_GROUP_RANGE(EHT_GI_16, BW_20),
-+	EHT_GROUP_RANGE(EHT_GI_32, BW_20),
-+
-+	EHT_GROUP_RANGE(EHT_GI_08, BW_40),
-+	EHT_GROUP_RANGE(EHT_GI_16, BW_40),
-+	EHT_GROUP_RANGE(EHT_GI_32, BW_40),
-+
-+	EHT_GROUP_RANGE(EHT_GI_08, BW_80),
-+	EHT_GROUP_RANGE(EHT_GI_16, BW_80),
-+	EHT_GROUP_RANGE(EHT_GI_32, BW_80),
-+
-+	EHT_GROUP_RANGE(EHT_GI_08, BW_160),
-+	EHT_GROUP_RANGE(EHT_GI_16, BW_160),
-+	EHT_GROUP_RANGE(EHT_GI_32, BW_160),
-+
-+	EHT_GROUP_RANGE(EHT_GI_08, BW_320),
-+	EHT_GROUP_RANGE(EHT_GI_16, BW_320),
-+	EHT_GROUP_RANGE(EHT_GI_32, BW_320),
- };
- 
- static u32
-@@ -422,6 +525,9 @@ static u32 ieee80211_get_rate_duration(s
- 	case RATE_INFO_BW_160:
- 		bw = BW_160;
- 		break;
-+	case RATE_INFO_BW_320:
-+		bw = BW_320;
-+		break;
- 	default:
- 		WARN_ON_ONCE(1);
- 		return 0;
-@@ -443,14 +549,27 @@ static u32 ieee80211_get_rate_duration(s
- 		idx = status->rate_idx;
- 		group = HE_GROUP_IDX(streams, status->he_gi, bw);
- 		break;
-+	case RX_ENC_EHT:
-+		streams = status->nss;
-+		idx = status->rate_idx;
-+		group = EHT_GROUP_IDX(streams, status->eht.gi, bw);
-+		break;
- 	default:
- 		WARN_ON_ONCE(1);
- 		return 0;
- 	}
- 
--	if (WARN_ON_ONCE((status->encoding != RX_ENC_HE && streams > 4) ||
--			 (status->encoding == RX_ENC_HE && streams > 8)))
--		return 0;
-+	switch (status->encoding) {
-+	case RX_ENC_EHT:
-+	case RX_ENC_HE:
-+		if (WARN_ON_ONCE(streams > 8))
-+			return 0;
-+		break;
-+	default:
-+		if (WARN_ON_ONCE(streams > 4))
-+			return 0;
-+		break;
-+	}
- 
- 	if (idx >= MCS_GROUP_RATES)
- 		return 0;
-@@ -517,7 +636,9 @@ static bool ieee80211_fill_rate_info(str
- 	stat->nss = ri->nss;
- 	stat->rate_idx = ri->mcs;
- 
--	if (ri->flags & RATE_INFO_FLAGS_HE_MCS)
-+	if (ri->flags & RATE_INFO_FLAGS_EHT_MCS)
-+		stat->encoding = RX_ENC_EHT;
-+	else if (ri->flags & RATE_INFO_FLAGS_HE_MCS)
- 		stat->encoding = RX_ENC_HE;
- 	else if (ri->flags & RATE_INFO_FLAGS_VHT_MCS)
- 		stat->encoding = RX_ENC_VHT;
-@@ -529,7 +650,14 @@ static bool ieee80211_fill_rate_info(str
- 	if (ri->flags & RATE_INFO_FLAGS_SHORT_GI)
- 		stat->enc_flags |= RX_ENC_FLAG_SHORT_GI;
- 
--	stat->he_gi = ri->he_gi;
-+	switch (stat->encoding) {
-+	case RX_ENC_EHT:
-+		stat->eht.gi = ri->eht_gi;
-+		break;
-+	default:
-+		stat->he_gi = ri->he_gi;
-+		break;
-+	}
- 
- 	if (stat->encoding != RX_ENC_LEGACY)
- 		return true;

package/kernel/mac80211/patches/subsys/331-wifi-cfg80211-check-radio-iface-combination-for-mult.patch

@@ -1,122 +0,0 @@
-From: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
-Date: Tue, 17 Sep 2024 19:32:39 +0530
-Subject: [PATCH] wifi: cfg80211: check radio iface combination for multi radio
- per wiphy
-
-Currently, wiphy_verify_combinations() fails for the multi-radio per wiphy
-due to the condition check on new global interface combination that DFS
-only works on one channel. In a multi-radio scenario, new global interface
-combination encompasses the capabilities of all radio combinations, so it
-supports more than one channel with DFS. For multi-radio per wiphy,
-interface combination verification needs to be performed for radio specific
-interface combinations. This is necessary as the new global interface
-combination combines the capabilities of all radio combinations.
-
-Fixes: a01b1e9f9955 ("wifi: mac80211: add support for DFS with multiple radios")
-Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
----
-
---- a/net/wireless/core.c
-+++ b/net/wireless/core.c
-@@ -599,16 +599,20 @@ use_default_name:
- }
- EXPORT_SYMBOL(wiphy_new_nm);
- 
--static int wiphy_verify_combinations(struct wiphy *wiphy)
-+static
-+int wiphy_verify_iface_combinations(struct wiphy *wiphy,
-+				    const struct ieee80211_iface_combination *iface_comb,
-+				    int n_iface_comb,
-+				    bool combined_radio)
- {
- 	const struct ieee80211_iface_combination *c;
- 	int i, j;
- 
--	for (i = 0; i < wiphy->n_iface_combinations; i++) {
-+	for (i = 0; i < n_iface_comb; i++) {
- 		u32 cnt = 0;
- 		u16 all_iftypes = 0;
- 
--		c = &wiphy->iface_combinations[i];
-+		c = &iface_comb[i];
- 
- 		/*
- 		 * Combinations with just one interface aren't real,
-@@ -621,9 +625,13 @@ static int wiphy_verify_combinations(str
- 		if (WARN_ON(!c->num_different_channels))
- 			return -EINVAL;
- 
--		/* DFS only works on one channel. */
--		if (WARN_ON(c->radar_detect_widths &&
--			    (c->num_different_channels > 1)))
-+		/* DFS only works on one channel. Avoid this check
-+		 * for multi-radio global combination, since it hold
-+		 * the capabilities of all radio combinations.
-+		 */
-+		if (!combined_radio &&
-+		    WARN_ON(c->radar_detect_widths &&
-+			    c->num_different_channels > 1))
- 			return -EINVAL;
- 
- 		if (WARN_ON(!c->n_limits))
-@@ -644,13 +652,21 @@ static int wiphy_verify_combinations(str
- 			if (WARN_ON(wiphy->software_iftypes & types))
- 				return -EINVAL;
- 
--			/* Only a single P2P_DEVICE can be allowed */
--			if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) &&
-+			/* Only a single P2P_DEVICE can be allowed, avoid this
-+			 * check for multi-radio global combination, since it
-+			 * hold the capabilities of all radio combinations.
-+			 */
-+			if (!combined_radio &&
-+			    WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) &&
- 				    c->limits[j].max > 1))
- 				return -EINVAL;
- 
--			/* Only a single NAN can be allowed */
--			if (WARN_ON(types & BIT(NL80211_IFTYPE_NAN) &&
-+			/* Only a single NAN can be allowed, avoid this
-+			 * check for multi-radio global combination, since it
-+			 * hold the capabilities of all radio combinations.
-+			 */
-+			if (!combined_radio &&
-+			    WARN_ON(types & BIT(NL80211_IFTYPE_NAN) &&
- 				    c->limits[j].max > 1))
- 				return -EINVAL;
- 
-@@ -674,6 +690,34 @@ static int wiphy_verify_combinations(str
- 	return 0;
- }
- 
-+static int wiphy_verify_combinations(struct wiphy *wiphy)
-+{
-+	int i, ret;
-+	bool combined_radio = false;
-+
-+	if (wiphy->n_radio) {
-+		for (i = 0; i < wiphy->n_radio; i++) {
-+			const struct wiphy_radio *radio = &wiphy->radio[i];
-+
-+			ret = wiphy_verify_iface_combinations(wiphy,
-+							      radio->iface_combinations,
-+							      radio->n_iface_combinations,
-+							      false);
-+			if (ret)
-+				return ret;
-+		}
-+
-+		combined_radio = true;
-+	}
-+
-+	ret = wiphy_verify_iface_combinations(wiphy,
-+					      wiphy->iface_combinations,
-+					      wiphy->n_iface_combinations,
-+					      combined_radio);
-+
-+	return ret;
-+}
-+
- int wiphy_register(struct wiphy *wiphy)
- {
- 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);